From 51f3d1e140307561f64c47dae1d44f912accb5cf Mon Sep 17 00:00:00 2001 From: marha Date: Tue, 5 Oct 2010 06:44:44 +0000 Subject: Update to the following packages: - glproto-1.4.12 - kbproto-1.0.5 - renderproto-0.11.1 - xclock-1.0.5 - xextproto-7.1.2 - xproto-7.0.18 - xwininfo-1.1.0 --- X11/extensions/Makefile.in | 366 +++++++++++++++++++++++++++++++++++++-------- 1 file changed, 307 insertions(+), 59 deletions(-) (limited to 'X11/extensions/Makefile.in') diff --git a/X11/extensions/Makefile.in b/X11/extensions/Makefile.in index a30a0e982..81eaffd2a 100644 --- a/X11/extensions/Makefile.in +++ b/X11/extensions/Makefile.in @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -33,11 +33,14 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ subdir = . -DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/xextproto.pc.in \ - $(top_srcdir)/configure $(xext_HEADERS) COPYING ChangeLog \ - install-sh missing +DIST_COMMON = README $(am__configure_deps) $(compat_HEADERS) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(srcdir)/xextproto.pc.in $(top_srcdir)/configure \ + $(xext_HEADERS) COPYING ChangeLog INSTALL config.guess \ + config.sub install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -47,8 +50,21 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = xextproto.pc CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ SOURCES = DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ @@ -70,11 +86,18 @@ am__nobase_list = $(am__nobase_strip_setup); \ am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xextdir)" +am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(compatdir)" \ + "$(DESTDIR)$(xextdir)" DATA = $(pkgconfig_DATA) -HEADERS = $(xext_HEADERS) +HEADERS = $(compat_HEADERS) $(xext_HEADERS) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) @@ -82,31 +105,86 @@ am__remove_distdir = \ { test ! -d "$(distdir)" \ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr "$(distdir)"; }; } +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ +ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ +ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +APP_MAN_DIR = @APP_MAN_DIR@ +APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ CHANGELOG_CMD = @CHANGELOG_CMD@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CWARNFLAGS = @CWARNFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ +DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FILE_MAN_DIR = @FILE_MAN_DIR@ +FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ +FOP = @FOP@ +GREP = @GREP@ INSTALL = @INSTALL@ +INSTALL_CMD = @INSTALL_CMD@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ +LIB_MAN_DIR = @LIB_MAN_DIR@ +LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MAN_SUBSTS = @MAN_SUBSTS@ +MISC_MAN_DIR = @MISC_MAN_DIR@ +MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ MKDIR_P = @MKDIR_P@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ @@ -114,27 +192,44 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ +STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@ VERSION = @VERSION@ +XMLTO = @XMLTO@ +XORG_MAN_PAGE = @XORG_MAN_PAGE@ +XORG_SGML_PATH = @XORG_SGML_PATH@ +XSL_STYLESHEET = @XSL_STYLESHEET@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ +build = @build@ build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ -distcleancheck_listfiles = @distcleancheck_listfiles@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ +host = @host@ host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ @@ -158,6 +253,7 @@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ +SUBDIRS = specs xextdir = $(includedir)/X11/extensions xext_HEADERS = \ dpmsconst.h \ @@ -191,16 +287,26 @@ xext_HEADERS = \ xtestconst.h \ xtestproto.h + +# +# These headers allow old servers to be built with +# new headers +# +compatdir = $(xextdir) +compat_HEADERS = \ + shapestr.h \ + shmstr.h \ + syncstr.h + pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = xextproto.pc -EXTRA_DIST = xextproto.pc.in geproto.txt ChangeLog -MAINTAINERCLEANFILES = ChangeLog -all: all-am +MAINTAINERCLEANFILES = ChangeLog INSTALL +all: all-recursive .SUFFIXES: am--refresh: @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ @@ -227,9 +333,9 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(top_srcdir)/configure: $(am__configure_deps) +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): xextproto.pc: $(top_builddir)/config.status $(srcdir)/xextproto.pc.in @@ -254,6 +360,26 @@ uninstall-pkgconfigDATA: test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files +install-compatHEADERS: $(compat_HEADERS) + @$(NORMAL_INSTALL) + test -z "$(compatdir)" || $(MKDIR_P) "$(DESTDIR)$(compatdir)" + @list='$(compat_HEADERS)'; test -n "$(compatdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(compatdir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(compatdir)" || exit $$?; \ + done + +uninstall-compatHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(compat_HEADERS)'; test -n "$(compatdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(compatdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(compatdir)" && rm -f $$files install-xextHEADERS: $(xext_HEADERS) @$(NORMAL_INSTALL) test -z "$(xextdir)" || $(MKDIR_P) "$(DESTDIR)$(xextdir)" @@ -275,6 +401,76 @@ uninstall-xextHEADERS: echo " ( cd '$(DESTDIR)$(xextdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(xextdir)" && rm -f $$files +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -285,10 +481,23 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) mkid -fID $$unique tags: TAGS -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ @@ -307,7 +516,7 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ fi; \ fi ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -359,11 +568,40 @@ distdir: $(DISTFILES) || exit 1; \ fi; \ done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ @@ -407,17 +645,17 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ - unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac @@ -477,21 +715,22 @@ distcleancheck: distclean $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am -check: check-am +check: check-recursive all-am: Makefile $(DATA) $(HEADERS) -installdirs: - for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xextdir)"; do \ +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(compatdir)" "$(DESTDIR)$(xextdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -installcheck: installcheck-am +installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ @@ -509,99 +748,108 @@ maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am +clean: clean-recursive clean-am: clean-generic mostlyclean-am -distclean: distclean-am +distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags -dvi: dvi-am +dvi: dvi-recursive dvi-am: -html: html-am +html: html-recursive html-am: -info: info-am +info: info-recursive info-am: -install-data-am: install-pkgconfigDATA install-xextHEADERS +install-data-am: install-compatHEADERS install-pkgconfigDATA \ + install-xextHEADERS -install-dvi: install-dvi-am +install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: -install-html: install-html-am +install-html: install-html-recursive install-html-am: -install-info: install-info-am +install-info: install-info-recursive install-info-am: install-man: -install-pdf: install-pdf-am +install-pdf: install-pdf-recursive install-pdf-am: -install-ps: install-ps-am +install-ps: install-ps-recursive install-ps-am: installcheck-am: -maintainer-clean: maintainer-clean-am +maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic -mostlyclean: mostlyclean-am +mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic -pdf: pdf-am +pdf: pdf-recursive pdf-am: -ps: ps-am +ps: ps-recursive ps-am: -uninstall-am: uninstall-pkgconfigDATA uninstall-xextHEADERS +uninstall-am: uninstall-compatHEADERS uninstall-pkgconfigDATA \ + uninstall-xextHEADERS -.MAKE: install-am install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive -.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \ - clean-generic ctags dist dist-all dist-bzip2 dist-gzip \ +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-generic distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-pkgconfigDATA install-ps install-ps-am install-strip \ - install-xextHEADERS installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-pkgconfigDATA uninstall-xextHEADERS + html-am info info-am install install-am install-compatHEADERS \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ + install-strip install-xextHEADERS installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ + uninstall-compatHEADERS uninstall-pkgconfigDATA \ + uninstall-xextHEADERS + +.PHONY: ChangeLog INSTALL -.PHONY: ChangeLog +INSTALL: + $(INSTALL_CMD) ChangeLog: $(CHANGELOG_CMD) -dist-hook: ChangeLog +dist-hook: ChangeLog INSTALL # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. -- cgit v1.2.3