From a7971771a8ab6f6f76a2a8e482dbb3a30901af1c Mon Sep 17 00:00:00 2001 From: marha Date: Fri, 25 Feb 2011 07:31:13 +0000 Subject: xserver randrproto mesa xkeyboard-config git update 25 Feb 2011 --- X11/extensions/randr.h | 358 +-- X11/extensions/randrproto.h | 1846 +++++++-------- X11/extensions/randrproto.txt | 5200 +++++++++++++++++++++-------------------- 3 files changed, 3732 insertions(+), 3672 deletions(-) (limited to 'X11/extensions') diff --git a/X11/extensions/randr.h b/X11/extensions/randr.h index fec7f4f4e..41aedd5de 100644 --- a/X11/extensions/randr.h +++ b/X11/extensions/randr.h @@ -1,173 +1,185 @@ -/* - * Copyright © 2000 Compaq Computer Corporation - * Copyright © 2002 Hewlett Packard Company - * Copyright © 2006 Intel Corporation - * Copyright © 2008 Red Hat, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of the copyright holders not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. The copyright holders make no representations - * about the suitability of this software for any purpose. It is provided "as - * is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO - * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE - * OF THIS SOFTWARE. - * - * Author: Jim Gettys, HP Labs, Hewlett-Packard, Inc. - * Keith Packard, Intel Corporation - */ - -#ifndef _RANDR_H_ -#define _RANDR_H_ - -typedef unsigned short Rotation; -typedef unsigned short SizeID; -typedef unsigned short SubpixelOrder; -typedef unsigned short Connection; -typedef unsigned short XRandrRotation; -typedef unsigned short XRandrSizeID; -typedef unsigned short XRandrSubpixelOrder; -typedef unsigned long XRandrModeFlags; - -#define RANDR_NAME "RANDR" -#define RANDR_MAJOR 1 -#define RANDR_MINOR 4 - -#define RRNumberErrors 3 -#define RRNumberEvents 2 -#define RRNumberRequests 37 - -#define X_RRQueryVersion 0 -/* we skip 1 to make old clients fail pretty immediately */ -#define X_RROldGetScreenInfo 1 -#define X_RR1_0SetScreenConfig 2 -/* V1.0 apps share the same set screen config request id */ -#define X_RRSetScreenConfig 2 -#define X_RROldScreenChangeSelectInput 3 -/* 3 used to be ScreenChangeSelectInput; deprecated */ -#define X_RRSelectInput 4 -#define X_RRGetScreenInfo 5 - -/* V1.2 additions */ -#define X_RRGetScreenSizeRange 6 -#define X_RRSetScreenSize 7 -#define X_RRGetScreenResources 8 -#define X_RRGetOutputInfo 9 -#define X_RRListOutputProperties 10 -#define X_RRQueryOutputProperty 11 -#define X_RRConfigureOutputProperty 12 -#define X_RRChangeOutputProperty 13 -#define X_RRDeleteOutputProperty 14 -#define X_RRGetOutputProperty 15 -#define X_RRCreateMode 16 -#define X_RRDestroyMode 17 -#define X_RRAddOutputMode 18 -#define X_RRDeleteOutputMode 19 -#define X_RRGetCrtcInfo 20 -#define X_RRSetCrtcConfig 21 -#define X_RRGetCrtcGammaSize 22 -#define X_RRGetCrtcGamma 23 -#define X_RRSetCrtcGamma 24 - -/* V1.3 additions */ -#define X_RRGetScreenResourcesCurrent 25 -#define X_RRSetCrtcTransform 26 -#define X_RRGetCrtcTransform 27 -#define X_RRGetPanning 28 -#define X_RRSetPanning 29 -#define X_RRSetOutputPrimary 30 -#define X_RRGetOutputPrimary 31 - -#define RRTransformUnit (1L << 0) -#define RRTransformScaleUp (1L << 1) -#define RRTransformScaleDown (1L << 2) -#define RRTransformProjective (1L << 3) - -/* V1.4 additions */ -#define X_RRQueryScanoutPixmaps 32 -#define X_RRCreateScanoutPixmap 33 -#define X_RRSetCrtcSpriteTransform 34 -#define X_RRGetCrtcSpriteTransform 35 -#define X_RRSetCrtcConfigs 36 - -/* Event selection bits */ -#define RRScreenChangeNotifyMask (1L << 0) -/* V1.2 additions */ -#define RRCrtcChangeNotifyMask (1L << 1) -#define RROutputChangeNotifyMask (1L << 2) -#define RROutputPropertyNotifyMask (1L << 3) - -/* Event codes */ -#define RRScreenChangeNotify 0 -/* V1.2 additions */ -#define RRNotify 1 -/* RRNotify Subcodes */ -#define RRNotify_CrtcChange 0 -#define RRNotify_OutputChange 1 -#define RRNotify_OutputProperty 2 - -/* used in the rotation field; rotation and reflection in 0.1 proto. */ -#define RR_Rotate_0 1 -#define RR_Rotate_90 2 -#define RR_Rotate_180 4 -#define RR_Rotate_270 8 - -/* new in 1.0 protocol, to allow reflection of screen */ - -#define RR_Reflect_X 16 -#define RR_Reflect_Y 32 - -#define RRSetConfigSuccess 0 -#define RRSetConfigInvalidConfigTime 1 -#define RRSetConfigInvalidTime 2 -#define RRSetConfigFailed 3 - -/* new in 1.2 protocol */ - -#define RR_HSyncPositive 0x00000001 -#define RR_HSyncNegative 0x00000002 -#define RR_VSyncPositive 0x00000004 -#define RR_VSyncNegative 0x00000008 -#define RR_Interlace 0x00000010 -#define RR_DoubleScan 0x00000020 -#define RR_CSync 0x00000040 -#define RR_CSyncPositive 0x00000080 -#define RR_CSyncNegative 0x00000100 -#define RR_HSkewPresent 0x00000200 -#define RR_BCast 0x00000400 -#define RR_PixelMultiplex 0x00000800 -#define RR_DoubleClock 0x00001000 -#define RR_ClockDivideBy2 0x00002000 - -#define RR_Connected 0 -#define RR_Disconnected 1 -#define RR_UnknownConnection 2 - -#define BadRROutput 0 -#define BadRRCrtc 1 -#define BadRRMode 2 - -/* new in 1.4 protocol */ -#define RR_CurrentScanoutPixmap 1 /* current scanout pixmap in RRSetCrtcConfigs */ - -/* Conventional RandR output properties */ - -#define RR_PROPERTY_BACKLIGHT "Backlight" -#define RR_PROPERTY_RANDR_EDID "EDID" -#define RR_PROPERTY_SIGNAL_FORMAT "SignalFormat" -#define RR_PROPERTY_SIGNAL_PROPERTIES "SignalProperties" -#define RR_PROPERTY_CONNECTOR_TYPE "ConnectorType" -#define RR_PROPERTY_CONNECTOR_NUMBER "ConnectorNumber" -#define RR_PROPERTY_COMPATIBILITY_LIST "CompatibilityList" -#define RR_PROPERTY_CLONE_LIST "CloneList" - -#endif /* _RANDR_H_ */ +/* + * Copyright © 2000 Compaq Computer Corporation + * Copyright © 2002 Hewlett Packard Company + * Copyright © 2006 Intel Corporation + * Copyright © 2008 Red Hat, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + * + * Author: Jim Gettys, HP Labs, Hewlett-Packard, Inc. + * Keith Packard, Intel Corporation + */ + +#ifndef _RANDR_H_ +#define _RANDR_H_ + +typedef unsigned short Rotation; +typedef unsigned short SizeID; +typedef unsigned short SubpixelOrder; +typedef unsigned short Connection; +typedef unsigned short XRandrRotation; +typedef unsigned short XRandrSizeID; +typedef unsigned short XRandrSubpixelOrder; +typedef unsigned long XRandrModeFlags; + +#define RANDR_NAME "RANDR" +#define RANDR_MAJOR 1 +#define RANDR_MINOR 4 + +#define RRNumberErrors 3 +#define RRNumberEvents 2 +#define RRNumberRequests 37 + +#define X_RRQueryVersion 0 +/* we skip 1 to make old clients fail pretty immediately */ +#define X_RROldGetScreenInfo 1 +#define X_RR1_0SetScreenConfig 2 +/* V1.0 apps share the same set screen config request id */ +#define X_RRSetScreenConfig 2 +#define X_RROldScreenChangeSelectInput 3 +/* 3 used to be ScreenChangeSelectInput; deprecated */ +#define X_RRSelectInput 4 +#define X_RRGetScreenInfo 5 + +/* V1.2 additions */ +#define X_RRGetScreenSizeRange 6 +#define X_RRSetScreenSize 7 +#define X_RRGetScreenResources 8 +#define X_RRGetOutputInfo 9 +#define X_RRListOutputProperties 10 +#define X_RRQueryOutputProperty 11 +#define X_RRConfigureOutputProperty 12 +#define X_RRChangeOutputProperty 13 +#define X_RRDeleteOutputProperty 14 +#define X_RRGetOutputProperty 15 +#define X_RRCreateMode 16 +#define X_RRDestroyMode 17 +#define X_RRAddOutputMode 18 +#define X_RRDeleteOutputMode 19 +#define X_RRGetCrtcInfo 20 +#define X_RRSetCrtcConfig 21 +#define X_RRGetCrtcGammaSize 22 +#define X_RRGetCrtcGamma 23 +#define X_RRSetCrtcGamma 24 + +/* V1.3 additions */ +#define X_RRGetScreenResourcesCurrent 25 +#define X_RRSetCrtcTransform 26 +#define X_RRGetCrtcTransform 27 +#define X_RRGetPanning 28 +#define X_RRSetPanning 29 +#define X_RRSetOutputPrimary 30 +#define X_RRGetOutputPrimary 31 + +#define RRTransformUnit (1L << 0) +#define RRTransformScaleUp (1L << 1) +#define RRTransformScaleDown (1L << 2) +#define RRTransformProjective (1L << 3) + +/* V1.4 additions */ + +#define RR_SetScreenPixmapSize (1 << 0) +#define RR_SetScreenSize (1 << 1) +#define RR_SetScreenSizeInMillimeters (1 << 2) +#define RR_SetScreenCrtcs (1 << 3) + +#define RR_SetCrtcPosition (1 << 4) +#define RR_SetCrtcMode (1 << 5) +#define RR_SetCrtcRotation (1 << 6) +#define RR_SetCrtcOutputs (1 << 7) +#define RR_SetCrtcSpritePositionTransform (1 << 8) +#define RR_SetCrtcSpriteImageTransform (1 << 9) +#define RR_SetCrtcPixmap (1 << 10) +#define RR_SetCrtcPixmapPosition (1 << 11) + +#define X_RRQueryScanoutPixmaps 32 +#define X_RRCreateScanoutPixmap 33 +#define X_RRSetCrtcSpriteTransform 34 +#define X_RRGetCrtcSpriteTransform 35 +#define X_RRSetCrtcConfigs 36 + +/* Event selection bits */ +#define RRScreenChangeNotifyMask (1L << 0) +/* V1.2 additions */ +#define RRCrtcChangeNotifyMask (1L << 1) +#define RROutputChangeNotifyMask (1L << 2) +#define RROutputPropertyNotifyMask (1L << 3) + +/* Event codes */ +#define RRScreenChangeNotify 0 +/* V1.2 additions */ +#define RRNotify 1 +/* RRNotify Subcodes */ +#define RRNotify_CrtcChange 0 +#define RRNotify_OutputChange 1 +#define RRNotify_OutputProperty 2 + +/* used in the rotation field; rotation and reflection in 0.1 proto. */ +#define RR_Rotate_0 1 +#define RR_Rotate_90 2 +#define RR_Rotate_180 4 +#define RR_Rotate_270 8 + +/* new in 1.0 protocol, to allow reflection of screen */ + +#define RR_Reflect_X 16 +#define RR_Reflect_Y 32 + +#define RRSetConfigSuccess 0 +#define RRSetConfigInvalidConfigTime 1 +#define RRSetConfigInvalidTime 2 +#define RRSetConfigFailed 3 + +/* new in 1.2 protocol */ + +#define RR_HSyncPositive 0x00000001 +#define RR_HSyncNegative 0x00000002 +#define RR_VSyncPositive 0x00000004 +#define RR_VSyncNegative 0x00000008 +#define RR_Interlace 0x00000010 +#define RR_DoubleScan 0x00000020 +#define RR_CSync 0x00000040 +#define RR_CSyncPositive 0x00000080 +#define RR_CSyncNegative 0x00000100 +#define RR_HSkewPresent 0x00000200 +#define RR_BCast 0x00000400 +#define RR_PixelMultiplex 0x00000800 +#define RR_DoubleClock 0x00001000 +#define RR_ClockDivideBy2 0x00002000 + +#define RR_Connected 0 +#define RR_Disconnected 1 +#define RR_UnknownConnection 2 + +#define BadRROutput 0 +#define BadRRCrtc 1 +#define BadRRMode 2 + +/* Conventional RandR output properties */ + +#define RR_PROPERTY_BACKLIGHT "Backlight" +#define RR_PROPERTY_RANDR_EDID "EDID" +#define RR_PROPERTY_SIGNAL_FORMAT "SignalFormat" +#define RR_PROPERTY_SIGNAL_PROPERTIES "SignalProperties" +#define RR_PROPERTY_CONNECTOR_TYPE "ConnectorType" +#define RR_PROPERTY_CONNECTOR_NUMBER "ConnectorNumber" +#define RR_PROPERTY_COMPATIBILITY_LIST "CompatibilityList" +#define RR_PROPERTY_CLONE_LIST "CloneList" + +#endif /* _RANDR_H_ */ diff --git a/X11/extensions/randrproto.h b/X11/extensions/randrproto.h index 298d4cfad..00bae2d4a 100644 --- a/X11/extensions/randrproto.h +++ b/X11/extensions/randrproto.h @@ -1,922 +1,924 @@ -/* - * Copyright © 2000 Compaq Computer Corporation - * Copyright © 2002 Hewlett-Packard Company - * Copyright © 2006 Intel Corporation - * Copyright © 2008 Red Hat, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of the copyright holders not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. The copyright holders make no representations - * about the suitability of this software for any purpose. It is provided "as - * is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO - * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE - * OF THIS SOFTWARE. - * - * Author: Jim Gettys, Hewlett-Packard Company, Inc. - * Keith Packard, Intel Corporation - */ - -/* note that RANDR 1.0 is incompatible with version 0.0, or 0.1 */ -/* V1.0 removes depth switching from the protocol */ -#ifndef _XRANDRP_H_ -#define _XRANDRP_H_ - -#include -#include - -#define Window CARD32 -#define Drawable CARD32 -#define Font CARD32 -#define Pixmap CARD32 -#define Cursor CARD32 -#define Colormap CARD32 -#define GContext CARD32 -#define Atom CARD32 -#define Time CARD32 -#define KeyCode CARD8 -#define KeySym CARD32 -#define RROutput CARD32 -#define RRMode CARD32 -#define RRCrtc CARD32 -#define RRModeFlags CARD32 -#define PictFormat CARD32 - -#define Rotation CARD16 -#define SizeID CARD16 -#define SubpixelOrder CARD16 - -/* - * data structures - */ - -typedef struct { - CARD16 widthInPixels B16; - CARD16 heightInPixels B16; - CARD16 widthInMillimeters B16; - CARD16 heightInMillimeters B16; -} xScreenSizes; -#define sz_xScreenSizes 8 - -/* - * requests and replies - */ - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - CARD32 majorVersion B32; - CARD32 minorVersion B32; -} xRRQueryVersionReq; -#define sz_xRRQueryVersionReq 12 - -typedef struct { - BYTE type; /* X_Reply */ - BYTE pad1; - CARD16 sequenceNumber B16; - CARD32 length B32; - CARD32 majorVersion B32; - CARD32 minorVersion B32; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; -} xRRQueryVersionReply; -#define sz_xRRQueryVersionReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Window window B32; -} xRRGetScreenInfoReq; -#define sz_xRRGetScreenInfoReq 8 - -/* - * the xRRScreenInfoReply structure is followed by: - * - * the size information - */ - - -typedef struct { - BYTE type; /* X_Reply */ - BYTE setOfRotations; - CARD16 sequenceNumber B16; - CARD32 length B32; - Window root B32; - Time timestamp B32; - Time configTimestamp B32; - CARD16 nSizes B16; - SizeID sizeID B16; - Rotation rotation B16; - CARD16 rate B16; - CARD16 nrateEnts B16; - CARD16 pad B16; -} xRRGetScreenInfoReply; -#define sz_xRRGetScreenInfoReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Drawable drawable B32; - Time timestamp B32; - Time configTimestamp B32; - SizeID sizeID B16; - Rotation rotation B16; -} xRR1_0SetScreenConfigReq; -#define sz_xRR1_0SetScreenConfigReq 20 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Drawable drawable B32; - Time timestamp B32; - Time configTimestamp B32; - SizeID sizeID B16; - Rotation rotation B16; - CARD16 rate B16; - CARD16 pad B16; -} xRRSetScreenConfigReq; -#define sz_xRRSetScreenConfigReq 24 - -typedef struct { - BYTE type; /* X_Reply */ - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - Time newTimestamp B32; - Time newConfigTimestamp B32; - Window root; - CARD16 subpixelOrder B16; - CARD16 pad4 B16; - CARD32 pad5 B32; - CARD32 pad6 B32; -} xRRSetScreenConfigReply; -#define sz_xRRSetScreenConfigReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Window window B32; - CARD16 enable B16; - CARD16 pad2 B16; -} xRRSelectInputReq; -#define sz_xRRSelectInputReq 12 - -/* - * Additions for version 1.2 - */ - -typedef struct _xRRModeInfo { - RRMode id B32; - CARD16 width B16; - CARD16 height B16; - CARD32 dotClock B32; - CARD16 hSyncStart B16; - CARD16 hSyncEnd B16; - CARD16 hTotal B16; - CARD16 hSkew B16; - CARD16 vSyncStart B16; - CARD16 vSyncEnd B16; - CARD16 vTotal B16; - CARD16 nameLength B16; - RRModeFlags modeFlags B32; -} xRRModeInfo; -#define sz_xRRModeInfo 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Window window B32; -} xRRGetScreenSizeRangeReq; -#define sz_xRRGetScreenSizeRangeReq 8 - -typedef struct { - BYTE type; /* X_Reply */ - CARD8 pad; - CARD16 sequenceNumber B16; - CARD32 length B32; - CARD16 minWidth B16; - CARD16 minHeight B16; - CARD16 maxWidth B16; - CARD16 maxHeight B16; - CARD32 pad0 B32; - CARD32 pad1 B32; - CARD32 pad2 B32; - CARD32 pad3 B32; -} xRRGetScreenSizeRangeReply; -#define sz_xRRGetScreenSizeRangeReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Window window B32; - CARD16 width B16; - CARD16 height B16; - CARD32 widthInMillimeters B32; - CARD32 heightInMillimeters B32; -} xRRSetScreenSizeReq; -#define sz_xRRSetScreenSizeReq 20 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Window window B32; -} xRRGetScreenResourcesReq; -#define sz_xRRGetScreenResourcesReq 8 - -typedef struct { - BYTE type; - CARD8 pad; - CARD16 sequenceNumber B16; - CARD32 length B32; - Time timestamp B32; - Time configTimestamp B32; - CARD16 nCrtcs B16; - CARD16 nOutputs B16; - CARD16 nModes B16; - CARD16 nbytesNames B16; - CARD32 pad1 B32; - CARD32 pad2 B32; -} xRRGetScreenResourcesReply; -#define sz_xRRGetScreenResourcesReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; - Time configTimestamp B32; -} xRRGetOutputInfoReq; -#define sz_xRRGetOutputInfoReq 12 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - Time timestamp B32; - RRCrtc crtc B32; - CARD32 mmWidth B32; - CARD32 mmHeight B32; - CARD8 connection; - CARD8 subpixelOrder; - CARD16 nCrtcs B16; - CARD16 nModes B16; - CARD16 nPreferred B16; - CARD16 nClones B16; - CARD16 nameLength B16; -} xRRGetOutputInfoReply; -#define sz_xRRGetOutputInfoReply 36 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; -} xRRListOutputPropertiesReq; -#define sz_xRRListOutputPropertiesReq 8 - -typedef struct { - BYTE type; - CARD8 pad0; - CARD16 sequenceNumber B16; - CARD32 length B32; - CARD16 nAtoms B16; - CARD16 pad1 B16; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; - CARD32 pad6 B32; -} xRRListOutputPropertiesReply; -#define sz_xRRListOutputPropertiesReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; - Atom property B32; -} xRRQueryOutputPropertyReq; -#define sz_xRRQueryOutputPropertyReq 12 - -typedef struct { - BYTE type; - BYTE pad0; - CARD16 sequenceNumber B16; - CARD32 length B32; - BOOL pending; - BOOL range; - BOOL immutable; - BYTE pad1; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; - CARD32 pad6 B32; -} xRRQueryOutputPropertyReply; -#define sz_xRRQueryOutputPropertyReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; - Atom property B32; - BOOL pending; - BOOL range; - CARD16 pad B16; -} xRRConfigureOutputPropertyReq; -#define sz_xRRConfigureOutputPropertyReq 16 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; - Atom property B32; - Atom type B32; - CARD8 format; - CARD8 mode; - CARD16 pad; - CARD32 nUnits B32; -} xRRChangeOutputPropertyReq; -#define sz_xRRChangeOutputPropertyReq 24 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; - Atom property B32; -} xRRDeleteOutputPropertyReq; -#define sz_xRRDeleteOutputPropertyReq 12 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; - Atom property B32; - Atom type B32; - CARD32 longOffset B32; - CARD32 longLength B32; -#ifdef __cplusplus - BOOL _delete; -#else - BOOL delete; -#endif - BOOL pending; - CARD16 pad1 B16; -} xRRGetOutputPropertyReq; -#define sz_xRRGetOutputPropertyReq 28 - -typedef struct { - BYTE type; - CARD8 format; - CARD16 sequenceNumber B16; - CARD32 length B32; - Atom propertyType B32; - CARD32 bytesAfter B32; - CARD32 nItems B32; - CARD32 pad1 B32; - CARD32 pad2 B32; - CARD32 pad3 B32; -} xRRGetOutputPropertyReply; -#define sz_xRRGetOutputPropertyReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Window window B32; - xRRModeInfo modeInfo; -} xRRCreateModeReq; -#define sz_xRRCreateModeReq 40 - -typedef struct { - BYTE type; - CARD8 pad0; - CARD16 sequenceNumber B16; - CARD32 length B32; - RRMode mode B32; - CARD32 pad1 B32; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; -} xRRCreateModeReply; -#define sz_xRRCreateModeReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRMode mode B32; -} xRRDestroyModeReq; -#define sz_xRRDestroyModeReq 8 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; - RRMode mode B32; -} xRRAddOutputModeReq; -#define sz_xRRAddOutputModeReq 12 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RROutput output B32; - RRMode mode B32; -} xRRDeleteOutputModeReq; -#define sz_xRRDeleteOutputModeReq 12 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; - Time configTimestamp B32; -} xRRGetCrtcInfoReq; -#define sz_xRRGetCrtcInfoReq 12 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - Time timestamp B32; - INT16 x B16; - INT16 y B16; - CARD16 width B16; - CARD16 height B16; - RRMode mode B32; - Rotation rotation B16; - Rotation rotations B16; - CARD16 nOutput B16; - CARD16 nPossibleOutput B16; -} xRRGetCrtcInfoReply; -#define sz_xRRGetCrtcInfoReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; - Time timestamp B32; - Time configTimestamp B32; - INT16 x B16; - INT16 y B16; - RRMode mode B32; - Rotation rotation B16; - CARD16 pad B16; -} xRRSetCrtcConfigReq; -#define sz_xRRSetCrtcConfigReq 28 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - Time newTimestamp B32; - CARD32 pad1 B32; - CARD32 pad2 B16; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; -} xRRSetCrtcConfigReply; -#define sz_xRRSetCrtcConfigReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; -} xRRGetCrtcGammaSizeReq; -#define sz_xRRGetCrtcGammaSizeReq 8 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - CARD16 size B16; - CARD16 pad1 B16; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; - CARD32 pad6 B32; -} xRRGetCrtcGammaSizeReply; -#define sz_xRRGetCrtcGammaSizeReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; -} xRRGetCrtcGammaReq; -#define sz_xRRGetCrtcGammaReq 8 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - CARD16 size B16; - CARD16 pad1 B16; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; - CARD32 pad6 B32; -} xRRGetCrtcGammaReply; -#define sz_xRRGetCrtcGammaReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; - CARD16 size B16; - CARD16 pad1 B16; -} xRRSetCrtcGammaReq; -#define sz_xRRSetCrtcGammaReq 12 - -/* - * Additions for V1.3 - */ - -typedef xRRGetScreenResourcesReq xRRGetScreenResourcesCurrentReq; - -#define sz_xRRGetScreenResourcesCurrentReq sz_xRRGetScreenResourcesReq - -typedef xRRGetScreenResourcesReply xRRGetScreenResourcesCurrentReply; -#define sz_xRRGetScreenResourcesCurrentReply sz_xRRGetScreenResourcesReply - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; - xRenderTransform transform; - CARD16 nbytesFilter; /* number of bytes in filter name */ - CARD16 pad B16; -} xRRSetCrtcTransformReq; - -#define sz_xRRSetCrtcTransformReq 48 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; -} xRRGetCrtcTransformReq; - -#define sz_xRRGetCrtcTransformReq 8 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - xRenderTransform pendingTransform; - BYTE hasTransforms; - CARD8 pad0; - CARD16 pad1 B16; - xRenderTransform currentTransform; - CARD32 pad2 B32; - CARD16 pendingNbytesFilter B16; /* number of bytes in filter name */ - CARD16 pendingNparamsFilter B16; /* number of filter params */ - CARD16 currentNbytesFilter B16; /* number of bytes in filter name */ - CARD16 currentNparamsFilter B16; /* number of filter params */ -} xRRGetCrtcTransformReply; - -#define sz_xRRGetCrtcTransformReply 96 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Window window B32; - RROutput output B32; -} xRRSetOutputPrimaryReq; -#define sz_xRRSetOutputPrimaryReq 12 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Window window B32; -} xRRGetOutputPrimaryReq; -#define sz_xRRGetOutputPrimaryReq 8 - -typedef struct { - BYTE type; - CARD8 pad; - CARD16 sequenceNumber B16; - CARD32 length B32; - RROutput output B32; - CARD32 pad1 B32; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; -} xRRGetOutputPrimaryReply; -#define sz_xRRGetOutputPrimaryReply 32 - -/* - * Additions for 1.4 - */ - -typedef struct { - PictFormat format B32; - CARD16 maxWidth B16, maxHeight B16; - Rotation rotations B16; - CARD16 pad0 B16; - CARD32 pad1 B32; -} xRRScanoutPixmapInfo; -#define sz_xRRScanoutPixmapInfo 16 - -typedef struct { - RRCrtc crtc B32; - INT16 x B16, y B16; - RRMode mode B32; - Rotation rotation B16; - CARD16 nOutput B16; - xRenderTransform spritePositionTransform; - xRenderTransform spriteImageTransform; - Pixmap pixmap B32; - INT16 xPixmap B16, yPixmap B16; -} xRRCrtcConfig; -#define sz_xRRCrtcConfig (2*sz_xRenderTransform + 24) - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Drawable drawable B32; -} xRRQueryScanoutPixmapsReq; -#define sz_xRRQueryScanoutPixmapsReq 8 - -typedef struct { - BYTE type; - CARD8 pad; - CARD16 sequenceNumber B16; - CARD32 length B32; - CARD32 pad0 B32; - CARD32 pad1 B32; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; -} xRRQueryScanoutPixmapsReply; -#define sz_xRRQueryScanoutPixmapsReply 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Pixmap pid B32; - Drawable drawable B32; - CARD16 width B16, height B16; - PictFormat format B32; - Rotation rotations B16; - CARD16 pad B16; -} xRRCreateScanoutPixmapReq; -#define sz_xRRCreateScanoutPixmapReq 24 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; - xRenderTransform positionTransform; - xRenderTransform imageTransform; -} xRRSetCrtcSpriteTransformReq; -#define sz_xRRSetCrtcSpriteTransformReq (2*sz_xRenderTransform + 8) - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; -} xRRGetCrtcSpriteTransformReq; -#define sz_xRRGetCrtcSpriteTransformReq 8 - -typedef struct { - BYTE type; - CARD8 pad; - CARD16 sequenceNumber B16; - CARD32 length B32; - xRenderTransform positionTransform; - xRenderTransform imageTransform; -} xRRGetCrtcSpriteTransformReply; -#define sz_xRRGetCrtcSpriteTransformReply (2*sz_xRenderTransform + 8) - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - Drawable drawable B32; - CARD16 screenPixmapWidth B16, screenPixmapHeight B16; - CARD16 screenWidth B16, screenHeight B16; - CARD32 widthInMillimeters B32; - CARD32 heightInMillimeters B32; - CARD16 nConfigs B16; - CARD16 pad0 B16; - CARD32 pad1 B32; -} xRRSetCrtcConfigsReq; -#define sz_xRRSetCrtcConfigsReq 32 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - CARD32 pad0 B32; - CARD32 pad1 B32; - CARD32 pad2 B16; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; -} xRRSetCrtcConfigsReply; -#define sz_xRRSetCrtcConfigsReply 32 - -/* - * event - */ -typedef struct { - CARD8 type; /* always evBase + ScreenChangeNotify */ - CARD8 rotation; /* new rotation */ - CARD16 sequenceNumber B16; - Time timestamp B32; /* time screen was changed */ - Time configTimestamp B32; /* time config data was changed */ - Window root B32; /* root window */ - Window window B32; /* window requesting notification */ - SizeID sizeID B16; /* new size ID */ - CARD16 subpixelOrder B16; /* subpixel order */ - CARD16 widthInPixels B16; /* new size */ - CARD16 heightInPixels B16; - CARD16 widthInMillimeters B16; - CARD16 heightInMillimeters B16; -} xRRScreenChangeNotifyEvent; -#define sz_xRRScreenChangeNotifyEvent 32 - -typedef struct { - CARD8 type; /* always evBase + RRNotify */ - CARD8 subCode; /* RRNotify_CrtcChange */ - CARD16 sequenceNumber B16; - Time timestamp B32; /* time crtc was changed */ - Window window B32; /* window requesting notification */ - RRCrtc crtc B32; /* affected CRTC */ - RRMode mode B32; /* current mode */ - CARD16 rotation B16; /* rotation and reflection */ - CARD16 pad1 B16; /* unused */ - INT16 x B16; /* new location */ - INT16 y B16; - CARD16 width B16; /* new size */ - CARD16 height B16; -} xRRCrtcChangeNotifyEvent; -#define sz_xRRCrtcChangeNotifyEvent 32 - -typedef struct { - CARD8 type; /* always evBase + RRNotify */ - CARD8 subCode; /* RRNotify_OutputChange */ - CARD16 sequenceNumber B16; - Time timestamp B32; /* time output was changed */ - Time configTimestamp B32; /* time config was changed */ - Window window B32; /* window requesting notification */ - RROutput output B32; /* affected output */ - RRCrtc crtc B32; /* current crtc */ - RRMode mode B32; /* current mode */ - CARD16 rotation B16; /* rotation and reflection */ - CARD8 connection; /* connection status */ - CARD8 subpixelOrder; /* subpixel order */ -} xRROutputChangeNotifyEvent; -#define sz_xRROutputChangeNotifyEvent 32 - -typedef struct { - CARD8 type; /* always evBase + RRNotify */ - CARD8 subCode; /* RRNotify_OutputProperty */ - CARD16 sequenceNumber B16; - Window window B32; /* window requesting notification */ - RROutput output B32; /* affected output */ - Atom atom B32; /* property name */ - Time timestamp B32; /* time crtc was changed */ - CARD8 state; /* NewValue or Deleted */ - CARD8 pad1; - CARD16 pad2 B16; - CARD32 pad3 B32; - CARD32 pad4 B32; -} xRROutputPropertyNotifyEvent; -#define sz_xRROutputPropertyNotifyEvent 32 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; -} xRRGetPanningReq; -#define sz_xRRGetPanningReq 8 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - Time timestamp B32; - CARD16 left B16; - CARD16 top B16; - CARD16 width B16; - CARD16 height B16; - CARD16 track_left B16; - CARD16 track_top B16; - CARD16 track_width B16; - CARD16 track_height B16; - INT16 border_left B16; - INT16 border_top B16; - INT16 border_right B16; - INT16 border_bottom B16; -} xRRGetPanningReply; -#define sz_xRRGetPanningReply 36 - -typedef struct { - CARD8 reqType; - CARD8 randrReqType; - CARD16 length B16; - RRCrtc crtc B32; - Time timestamp B32; - CARD16 left B16; - CARD16 top B16; - CARD16 width B16; - CARD16 height B16; - CARD16 track_left B16; - CARD16 track_top B16; - CARD16 track_width B16; - CARD16 track_height B16; - INT16 border_left B16; - INT16 border_top B16; - INT16 border_right B16; - INT16 border_bottom B16; -} xRRSetPanningReq; -#define sz_xRRSetPanningReq 36 - -typedef struct { - BYTE type; - CARD8 status; - CARD16 sequenceNumber B16; - CARD32 length B32; - Time newTimestamp B32; - CARD32 pad1 B32; - CARD32 pad2 B32; - CARD32 pad3 B32; - CARD32 pad4 B32; - CARD32 pad5 B32; -} xRRSetPanningReply; -#define sz_xRRSetPanningReply 32 - -#undef PictFormat -#undef RRModeFlags -#undef RRCrtc -#undef RRMode -#undef RROutput -#undef RRMode -#undef RRCrtc -#undef Drawable -#undef Window -#undef Font -#undef Pixmap -#undef Cursor -#undef Colormap -#undef GContext -#undef Atom -#undef Time -#undef KeyCode -#undef KeySym -#undef Rotation -#undef SizeID -#undef SubpixelOrder - -#endif /* _XRANDRP_H_ */ +/* + * Copyright © 2000 Compaq Computer Corporation + * Copyright © 2002 Hewlett-Packard Company + * Copyright © 2006 Intel Corporation + * Copyright © 2008 Red Hat, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + * + * Author: Jim Gettys, Hewlett-Packard Company, Inc. + * Keith Packard, Intel Corporation + */ + +/* note that RANDR 1.0 is incompatible with version 0.0, or 0.1 */ +/* V1.0 removes depth switching from the protocol */ +#ifndef _XRANDRP_H_ +#define _XRANDRP_H_ + +#include +#include + +#define Window CARD32 +#define Drawable CARD32 +#define Font CARD32 +#define Pixmap CARD32 +#define Cursor CARD32 +#define Colormap CARD32 +#define GContext CARD32 +#define Atom CARD32 +#define Time CARD32 +#define KeyCode CARD8 +#define KeySym CARD32 +#define RROutput CARD32 +#define RRMode CARD32 +#define RRCrtc CARD32 +#define RRModeFlags CARD32 +#define PictFormat CARD32 + +#define Rotation CARD16 +#define SizeID CARD16 +#define SubpixelOrder CARD16 + +/* + * data structures + */ + +typedef struct { + CARD16 widthInPixels B16; + CARD16 heightInPixels B16; + CARD16 widthInMillimeters B16; + CARD16 heightInMillimeters B16; +} xScreenSizes; +#define sz_xScreenSizes 8 + +/* + * requests and replies + */ + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + CARD32 majorVersion B32; + CARD32 minorVersion B32; +} xRRQueryVersionReq; +#define sz_xRRQueryVersionReq 12 + +typedef struct { + BYTE type; /* X_Reply */ + BYTE pad1; + CARD16 sequenceNumber B16; + CARD32 length B32; + CARD32 majorVersion B32; + CARD32 minorVersion B32; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; +} xRRQueryVersionReply; +#define sz_xRRQueryVersionReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Window window B32; +} xRRGetScreenInfoReq; +#define sz_xRRGetScreenInfoReq 8 + +/* + * the xRRScreenInfoReply structure is followed by: + * + * the size information + */ + + +typedef struct { + BYTE type; /* X_Reply */ + BYTE setOfRotations; + CARD16 sequenceNumber B16; + CARD32 length B32; + Window root B32; + Time timestamp B32; + Time configTimestamp B32; + CARD16 nSizes B16; + SizeID sizeID B16; + Rotation rotation B16; + CARD16 rate B16; + CARD16 nrateEnts B16; + CARD16 pad B16; +} xRRGetScreenInfoReply; +#define sz_xRRGetScreenInfoReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Drawable drawable B32; + Time timestamp B32; + Time configTimestamp B32; + SizeID sizeID B16; + Rotation rotation B16; +} xRR1_0SetScreenConfigReq; +#define sz_xRR1_0SetScreenConfigReq 20 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Drawable drawable B32; + Time timestamp B32; + Time configTimestamp B32; + SizeID sizeID B16; + Rotation rotation B16; + CARD16 rate B16; + CARD16 pad B16; +} xRRSetScreenConfigReq; +#define sz_xRRSetScreenConfigReq 24 + +typedef struct { + BYTE type; /* X_Reply */ + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + Time newTimestamp B32; + Time newConfigTimestamp B32; + Window root; + CARD16 subpixelOrder B16; + CARD16 pad4 B16; + CARD32 pad5 B32; + CARD32 pad6 B32; +} xRRSetScreenConfigReply; +#define sz_xRRSetScreenConfigReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Window window B32; + CARD16 enable B16; + CARD16 pad2 B16; +} xRRSelectInputReq; +#define sz_xRRSelectInputReq 12 + +/* + * Additions for version 1.2 + */ + +typedef struct _xRRModeInfo { + RRMode id B32; + CARD16 width B16; + CARD16 height B16; + CARD32 dotClock B32; + CARD16 hSyncStart B16; + CARD16 hSyncEnd B16; + CARD16 hTotal B16; + CARD16 hSkew B16; + CARD16 vSyncStart B16; + CARD16 vSyncEnd B16; + CARD16 vTotal B16; + CARD16 nameLength B16; + RRModeFlags modeFlags B32; +} xRRModeInfo; +#define sz_xRRModeInfo 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Window window B32; +} xRRGetScreenSizeRangeReq; +#define sz_xRRGetScreenSizeRangeReq 8 + +typedef struct { + BYTE type; /* X_Reply */ + CARD8 pad; + CARD16 sequenceNumber B16; + CARD32 length B32; + CARD16 minWidth B16; + CARD16 minHeight B16; + CARD16 maxWidth B16; + CARD16 maxHeight B16; + CARD32 pad0 B32; + CARD32 pad1 B32; + CARD32 pad2 B32; + CARD32 pad3 B32; +} xRRGetScreenSizeRangeReply; +#define sz_xRRGetScreenSizeRangeReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Window window B32; + CARD16 width B16; + CARD16 height B16; + CARD32 widthInMillimeters B32; + CARD32 heightInMillimeters B32; +} xRRSetScreenSizeReq; +#define sz_xRRSetScreenSizeReq 20 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Window window B32; +} xRRGetScreenResourcesReq; +#define sz_xRRGetScreenResourcesReq 8 + +typedef struct { + BYTE type; + CARD8 pad; + CARD16 sequenceNumber B16; + CARD32 length B32; + Time timestamp B32; + Time configTimestamp B32; + CARD16 nCrtcs B16; + CARD16 nOutputs B16; + CARD16 nModes B16; + CARD16 nbytesNames B16; + CARD32 pad1 B32; + CARD32 pad2 B32; +} xRRGetScreenResourcesReply; +#define sz_xRRGetScreenResourcesReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; + Time configTimestamp B32; +} xRRGetOutputInfoReq; +#define sz_xRRGetOutputInfoReq 12 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + Time timestamp B32; + RRCrtc crtc B32; + CARD32 mmWidth B32; + CARD32 mmHeight B32; + CARD8 connection; + CARD8 subpixelOrder; + CARD16 nCrtcs B16; + CARD16 nModes B16; + CARD16 nPreferred B16; + CARD16 nClones B16; + CARD16 nameLength B16; +} xRRGetOutputInfoReply; +#define sz_xRRGetOutputInfoReply 36 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; +} xRRListOutputPropertiesReq; +#define sz_xRRListOutputPropertiesReq 8 + +typedef struct { + BYTE type; + CARD8 pad0; + CARD16 sequenceNumber B16; + CARD32 length B32; + CARD16 nAtoms B16; + CARD16 pad1 B16; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; + CARD32 pad6 B32; +} xRRListOutputPropertiesReply; +#define sz_xRRListOutputPropertiesReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; + Atom property B32; +} xRRQueryOutputPropertyReq; +#define sz_xRRQueryOutputPropertyReq 12 + +typedef struct { + BYTE type; + BYTE pad0; + CARD16 sequenceNumber B16; + CARD32 length B32; + BOOL pending; + BOOL range; + BOOL immutable; + BYTE pad1; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; + CARD32 pad6 B32; +} xRRQueryOutputPropertyReply; +#define sz_xRRQueryOutputPropertyReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; + Atom property B32; + BOOL pending; + BOOL range; + CARD16 pad B16; +} xRRConfigureOutputPropertyReq; +#define sz_xRRConfigureOutputPropertyReq 16 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; + Atom property B32; + Atom type B32; + CARD8 format; + CARD8 mode; + CARD16 pad; + CARD32 nUnits B32; +} xRRChangeOutputPropertyReq; +#define sz_xRRChangeOutputPropertyReq 24 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; + Atom property B32; +} xRRDeleteOutputPropertyReq; +#define sz_xRRDeleteOutputPropertyReq 12 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; + Atom property B32; + Atom type B32; + CARD32 longOffset B32; + CARD32 longLength B32; +#ifdef __cplusplus + BOOL _delete; +#else + BOOL delete; +#endif + BOOL pending; + CARD16 pad1 B16; +} xRRGetOutputPropertyReq; +#define sz_xRRGetOutputPropertyReq 28 + +typedef struct { + BYTE type; + CARD8 format; + CARD16 sequenceNumber B16; + CARD32 length B32; + Atom propertyType B32; + CARD32 bytesAfter B32; + CARD32 nItems B32; + CARD32 pad1 B32; + CARD32 pad2 B32; + CARD32 pad3 B32; +} xRRGetOutputPropertyReply; +#define sz_xRRGetOutputPropertyReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Window window B32; + xRRModeInfo modeInfo; +} xRRCreateModeReq; +#define sz_xRRCreateModeReq 40 + +typedef struct { + BYTE type; + CARD8 pad0; + CARD16 sequenceNumber B16; + CARD32 length B32; + RRMode mode B32; + CARD32 pad1 B32; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; +} xRRCreateModeReply; +#define sz_xRRCreateModeReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRMode mode B32; +} xRRDestroyModeReq; +#define sz_xRRDestroyModeReq 8 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; + RRMode mode B32; +} xRRAddOutputModeReq; +#define sz_xRRAddOutputModeReq 12 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RROutput output B32; + RRMode mode B32; +} xRRDeleteOutputModeReq; +#define sz_xRRDeleteOutputModeReq 12 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; + Time configTimestamp B32; +} xRRGetCrtcInfoReq; +#define sz_xRRGetCrtcInfoReq 12 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + Time timestamp B32; + INT16 x B16; + INT16 y B16; + CARD16 width B16; + CARD16 height B16; + RRMode mode B32; + Rotation rotation B16; + Rotation rotations B16; + CARD16 nOutput B16; + CARD16 nPossibleOutput B16; +} xRRGetCrtcInfoReply; +#define sz_xRRGetCrtcInfoReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; + Time timestamp B32; + Time configTimestamp B32; + INT16 x B16; + INT16 y B16; + RRMode mode B32; + Rotation rotation B16; + CARD16 pad B16; +} xRRSetCrtcConfigReq; +#define sz_xRRSetCrtcConfigReq 28 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + Time newTimestamp B32; + CARD32 pad1 B32; + CARD32 pad2 B16; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; +} xRRSetCrtcConfigReply; +#define sz_xRRSetCrtcConfigReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; +} xRRGetCrtcGammaSizeReq; +#define sz_xRRGetCrtcGammaSizeReq 8 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + CARD16 size B16; + CARD16 pad1 B16; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; + CARD32 pad6 B32; +} xRRGetCrtcGammaSizeReply; +#define sz_xRRGetCrtcGammaSizeReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; +} xRRGetCrtcGammaReq; +#define sz_xRRGetCrtcGammaReq 8 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + CARD16 size B16; + CARD16 pad1 B16; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; + CARD32 pad6 B32; +} xRRGetCrtcGammaReply; +#define sz_xRRGetCrtcGammaReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; + CARD16 size B16; + CARD16 pad1 B16; +} xRRSetCrtcGammaReq; +#define sz_xRRSetCrtcGammaReq 12 + +/* + * Additions for V1.3 + */ + +typedef xRRGetScreenResourcesReq xRRGetScreenResourcesCurrentReq; + +#define sz_xRRGetScreenResourcesCurrentReq sz_xRRGetScreenResourcesReq + +typedef xRRGetScreenResourcesReply xRRGetScreenResourcesCurrentReply; +#define sz_xRRGetScreenResourcesCurrentReply sz_xRRGetScreenResourcesReply + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; + xRenderTransform transform; + CARD16 nbytesFilter; /* number of bytes in filter name */ + CARD16 pad B16; +} xRRSetCrtcTransformReq; + +#define sz_xRRSetCrtcTransformReq 48 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; +} xRRGetCrtcTransformReq; + +#define sz_xRRGetCrtcTransformReq 8 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + xRenderTransform pendingTransform; + BYTE hasTransforms; + CARD8 pad0; + CARD16 pad1 B16; + xRenderTransform currentTransform; + CARD32 pad2 B32; + CARD16 pendingNbytesFilter B16; /* number of bytes in filter name */ + CARD16 pendingNparamsFilter B16; /* number of filter params */ + CARD16 currentNbytesFilter B16; /* number of bytes in filter name */ + CARD16 currentNparamsFilter B16; /* number of filter params */ +} xRRGetCrtcTransformReply; + +#define sz_xRRGetCrtcTransformReply 96 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Window window B32; + RROutput output B32; +} xRRSetOutputPrimaryReq; +#define sz_xRRSetOutputPrimaryReq 12 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Window window B32; +} xRRGetOutputPrimaryReq; +#define sz_xRRGetOutputPrimaryReq 8 + +typedef struct { + BYTE type; + CARD8 pad; + CARD16 sequenceNumber B16; + CARD32 length B32; + RROutput output B32; + CARD32 pad1 B32; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; +} xRRGetOutputPrimaryReply; +#define sz_xRRGetOutputPrimaryReply 32 + +/* + * Additions for 1.4 + */ + +typedef struct { + PictFormat format B32; + CARD16 maxWidth B16, maxHeight B16; + Rotation rotations B16; + CARD16 pad0 B16; + CARD32 pad1 B32; +} xRRScanoutPixmapInfo; +#define sz_xRRScanoutPixmapInfo 16 + +typedef struct { + RRCrtc crtc B32; + CARD32 set B32; + INT16 x B16, y B16; + RRMode mode B32; + Rotation rotation B16; + CARD16 nOutput B16; + xRenderTransform spritePositionTransform; + xRenderTransform spriteImageTransform; + Pixmap pixmap B32; + INT16 xPixmap B16, yPixmap B16; +} xRRCrtcConfig; +#define sz_xRRCrtcConfig (2*sz_xRenderTransform + 28) + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Drawable drawable B32; +} xRRQueryScanoutPixmapsReq; +#define sz_xRRQueryScanoutPixmapsReq 8 + +typedef struct { + BYTE type; + CARD8 pad; + CARD16 sequenceNumber B16; + CARD32 length B32; + CARD32 pad0 B32; + CARD32 pad1 B32; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; +} xRRQueryScanoutPixmapsReply; +#define sz_xRRQueryScanoutPixmapsReply 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Pixmap pid B32; + Drawable drawable B32; + CARD16 width B16, height B16; + PictFormat format B32; + Rotation rotations B16; + CARD16 pad B16; +} xRRCreateScanoutPixmapReq; +#define sz_xRRCreateScanoutPixmapReq 24 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; + xRenderTransform positionTransform; + xRenderTransform imageTransform; +} xRRSetCrtcSpriteTransformReq; +#define sz_xRRSetCrtcSpriteTransformReq (2*sz_xRenderTransform + 8) + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; +} xRRGetCrtcSpriteTransformReq; +#define sz_xRRGetCrtcSpriteTransformReq 8 + +typedef struct { + BYTE type; + CARD8 pad; + CARD16 sequenceNumber B16; + CARD32 length B32; + xRenderTransform positionTransform; + xRenderTransform imageTransform; +} xRRGetCrtcSpriteTransformReply; +#define sz_xRRGetCrtcSpriteTransformReply (2*sz_xRenderTransform + 8) + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + Drawable drawable B32; + CARD32 set B32; + CARD16 screenPixmapWidth B16, screenPixmapHeight B16; + CARD16 screenWidth B16, screenHeight B16; + CARD32 widthInMillimeters B32; + CARD32 heightInMillimeters B32; + CARD16 nConfigs B16; + CARD16 pad0 B16; + CARD32 pad1 B32; +} xRRSetCrtcConfigsReq; +#define sz_xRRSetCrtcConfigsReq 36 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + CARD32 pad0 B32; + CARD32 pad1 B32; + CARD32 pad2 B16; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; +} xRRSetCrtcConfigsReply; +#define sz_xRRSetCrtcConfigsReply 32 + +/* + * event + */ +typedef struct { + CARD8 type; /* always evBase + ScreenChangeNotify */ + CARD8 rotation; /* new rotation */ + CARD16 sequenceNumber B16; + Time timestamp B32; /* time screen was changed */ + Time configTimestamp B32; /* time config data was changed */ + Window root B32; /* root window */ + Window window B32; /* window requesting notification */ + SizeID sizeID B16; /* new size ID */ + CARD16 subpixelOrder B16; /* subpixel order */ + CARD16 widthInPixels B16; /* new size */ + CARD16 heightInPixels B16; + CARD16 widthInMillimeters B16; + CARD16 heightInMillimeters B16; +} xRRScreenChangeNotifyEvent; +#define sz_xRRScreenChangeNotifyEvent 32 + +typedef struct { + CARD8 type; /* always evBase + RRNotify */ + CARD8 subCode; /* RRNotify_CrtcChange */ + CARD16 sequenceNumber B16; + Time timestamp B32; /* time crtc was changed */ + Window window B32; /* window requesting notification */ + RRCrtc crtc B32; /* affected CRTC */ + RRMode mode B32; /* current mode */ + CARD16 rotation B16; /* rotation and reflection */ + CARD16 pad1 B16; /* unused */ + INT16 x B16; /* new location */ + INT16 y B16; + CARD16 width B16; /* new size */ + CARD16 height B16; +} xRRCrtcChangeNotifyEvent; +#define sz_xRRCrtcChangeNotifyEvent 32 + +typedef struct { + CARD8 type; /* always evBase + RRNotify */ + CARD8 subCode; /* RRNotify_OutputChange */ + CARD16 sequenceNumber B16; + Time timestamp B32; /* time output was changed */ + Time configTimestamp B32; /* time config was changed */ + Window window B32; /* window requesting notification */ + RROutput output B32; /* affected output */ + RRCrtc crtc B32; /* current crtc */ + RRMode mode B32; /* current mode */ + CARD16 rotation B16; /* rotation and reflection */ + CARD8 connection; /* connection status */ + CARD8 subpixelOrder; /* subpixel order */ +} xRROutputChangeNotifyEvent; +#define sz_xRROutputChangeNotifyEvent 32 + +typedef struct { + CARD8 type; /* always evBase + RRNotify */ + CARD8 subCode; /* RRNotify_OutputProperty */ + CARD16 sequenceNumber B16; + Window window B32; /* window requesting notification */ + RROutput output B32; /* affected output */ + Atom atom B32; /* property name */ + Time timestamp B32; /* time crtc was changed */ + CARD8 state; /* NewValue or Deleted */ + CARD8 pad1; + CARD16 pad2 B16; + CARD32 pad3 B32; + CARD32 pad4 B32; +} xRROutputPropertyNotifyEvent; +#define sz_xRROutputPropertyNotifyEvent 32 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; +} xRRGetPanningReq; +#define sz_xRRGetPanningReq 8 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + Time timestamp B32; + CARD16 left B16; + CARD16 top B16; + CARD16 width B16; + CARD16 height B16; + CARD16 track_left B16; + CARD16 track_top B16; + CARD16 track_width B16; + CARD16 track_height B16; + INT16 border_left B16; + INT16 border_top B16; + INT16 border_right B16; + INT16 border_bottom B16; +} xRRGetPanningReply; +#define sz_xRRGetPanningReply 36 + +typedef struct { + CARD8 reqType; + CARD8 randrReqType; + CARD16 length B16; + RRCrtc crtc B32; + Time timestamp B32; + CARD16 left B16; + CARD16 top B16; + CARD16 width B16; + CARD16 height B16; + CARD16 track_left B16; + CARD16 track_top B16; + CARD16 track_width B16; + CARD16 track_height B16; + INT16 border_left B16; + INT16 border_top B16; + INT16 border_right B16; + INT16 border_bottom B16; +} xRRSetPanningReq; +#define sz_xRRSetPanningReq 36 + +typedef struct { + BYTE type; + CARD8 status; + CARD16 sequenceNumber B16; + CARD32 length B32; + Time newTimestamp B32; + CARD32 pad1 B32; + CARD32 pad2 B32; + CARD32 pad3 B32; + CARD32 pad4 B32; + CARD32 pad5 B32; +} xRRSetPanningReply; +#define sz_xRRSetPanningReply 32 + +#undef PictFormat +#undef RRModeFlags +#undef RRCrtc +#undef RRMode +#undef RROutput +#undef RRMode +#undef RRCrtc +#undef Drawable +#undef Window +#undef Font +#undef Pixmap +#undef Cursor +#undef Colormap +#undef GContext +#undef Atom +#undef Time +#undef KeyCode +#undef KeySym +#undef Rotation +#undef SizeID +#undef SubpixelOrder + +#endif /* _XRANDRP_H_ */ diff --git a/X11/extensions/randrproto.txt b/X11/extensions/randrproto.txt index 9fe800f0c..20cac7562 100644 --- a/X11/extensions/randrproto.txt +++ b/X11/extensions/randrproto.txt @@ -1,2577 +1,2623 @@ - The X Resize, Rotate and Reflect Extension - Version 1.3.1 - 2009-10-5 - - Jim Gettys - Jim.Gettys@hp.com - Cambridge Research Laboratory - HP Labs - Hewlett Packard Company - - Keith Packard - keith.packard@intel.com - Open Source Technology Center - Intel Corporation - -1. Introduction - -The X Resize, Rotate and Reflect Extension, called RandR for short, -brings the ability to resize, rotate and reflect the root window of a -screen. It is based on the X Resize and Rotate Extension as specified -in the Proceedings of the 2001 Usenix Technical Conference [RANDR]. - -RandR as implemented and integrated into the X server differs in -one substantial fashion from the design discussed in that paper: that -is, RandR 1.0 does not implement the depth switching described in that -document, and the support described for that in the protocol in that -document and in the implementation has been removed from the -protocol described here, as it has been overtaken by events. - -These events include: - ► Modern toolkits (in this case, GTK+ 2.x) have progressed to the point - of implementing migration between screens of arbitrary depths - ► The continued advance of Moore's law has made limited amounts of VRAM - less of an issue, reducing the pressure to implement depth switching - on laptops or desktop systems - ► The continued decline of legacy toolkits whose design would have - required depth switching to support migration - ► The lack of depth switching implementation experience in the - intervening time, due to events beyond our control - -Additionally, the requirement to support depth switching might -complicate other re-engineering of the device independent part of the -X server that is currently being contemplated. - -Rather than further delaying RandR's widespread deployment for a feature -long wanted by the community (resizing of screens, particularly on laptops), -or the deployment of a protocol design that might be flawed due to lack of -implementation experience, we decided to remove depth switching from the -protocol. It may be implemented at a later time if resources and -interests permit as a revision to the protocol described here, which will -remain a stable base for applications. The protocol described here has been -implemented in the main X.org server, and more fully in the hw/kdrive -implementation in the distribution, which fully implements resizing, -rotation and reflection. - -1.2 Introduction to version 1.2 of the extension - -One of the significant limitations found in version 1.1 of the RandR -protocol was the inability to deal with the Xinerama model where multiple -monitors display portions of a common underlying screen. In this environment, -zero or more video outputs are associated with each CRT controller which -defines both a set of video timings and a 'viewport' within the larger -screen. This viewport is independent of the overall size of the screen, and -may be located anywhere within the screen. - -The effect is to decouple the reported size of the screen from the size -presented by each video output, and to permit multiple outputs to present -information for a single screen. - -To extend RandR for this model, we separate out the output, CRTC and screen -configuration information and permit them to be configured separately. For -compatibility with the 1.1 version of the protocol, we make the 1.1 requests -simultaneously affect both the screen and the (presumably sole) CRTC and -output. The set of available outputs are presented with UTF-8 encoded names -and may be connected to CRTCs as permitted by the underlying hardware. CRTC -configuration is now done with full mode information instead of just size -and refresh rate, and these modes have names. These names also use UTF-8 -encoding. New modes may also be added by the user. - -Additional requests and events are provided for this new functionality. - - ┌────────────────────────────────┬──────────┐ - ┏━━━━━━━┳───────────────┐ ╔════════╗ ╔════════╗ - ┃ 1 ┃ │ ║ A ║ ║ B ║ - ┃ ┏━━━╋━━━━━━━━━━━━━━━┫ ║ ║ ║ ║ - ┣━━━╋━━━┛ ┃ ╚════════╝ ╚════════╝ - │ ┃ 2 ┃─────────────────┐ - │ ┃ ┃ ╔═══════════════════╗ - │ ┃ ┃ ║ ║ - │ ┗━━━━━━━━━━━━━━━━━━━┫ ║ C ║ - └───────────────────────┘ ║ ║ - ┌──────┐ ┏━━━━┓ ╔══════╗ ║ ║ - │screen│ ┃CRTC┃ ║output║ ╚═══════════════════╝ - └──────┘ ┗━━━━┛ ╚══════╝ - -In this picture, the screen is covered (incompletely) by two CRTCs. CRTC1 -is connected to two outputs, A and B. CRTC2 is connected to output C. -Outputs A and B will present exactly the same region of the screen using -the same mode line. Output C will present a different (larger) region of -the screen using a different mode line. - -RandR provides information about each available CRTC and output; the -connection between CRTC and output is under application control, although -the hardware will probably impose restrictions on the possible -configurations. The protocol doesn't try to describe these restrictions, -instead it provides a mechanism to find out what combinations are supported. - -For instance, dual-link DVI gangs two CRTC outputs together to provide higher -bandwidth for large resolution screens. This is exposed in RandR by -requiring that nothing be connected to the second CRTC when driving a high -resolution screen on the first. - -1.3 Introduction to version 1.3 of the extension - -Version 1.3 builds on the changes made with version 1.2 and adds some new -capabilities without fundmentally changing the extension again. The -following features are added in this version: - - • Projective Transforms. The implementation work for general rotation - support made it trivial to add full projective transformations. These - can be used to scale the screen up/down as well as perform projector - keystone correct or other effects. - - • Panning. It was removed with RandR 1.2 because the old semantics didn't - fit any longer. With RandR 1.3 panning can be specified per crtc. - -1.4 Introduction to version 1.4 of the extension - -Version 1.4 adds a couple more capabilities to further expose the -underlying hardware to clients - - • Per-crtc pixmaps. This provides for multiple scan-out buffers - which applications can create and assign to arbitrary collections - of crtcs. - - • Sprite position and image transforms. These provide a projective - transform for both the hot spot location and the sprite image - itself for each CRTC. - - • RRSetCrtcConfigs request. This supplies a set of - crtc configurations to the server that must be applied together - or not at all. This can reduce screen flicker while also - providing the server a complete configuration for appropriate - resource management. - -The first two additions, per-crtc pixmaps and sprite transforms are -designed to solve two problems: - - 1) Screen transforms. The software transform code in the X server - uses a shadow frame buffer, adding another copy to every graphics - operation. Worse, the server has no idea about when clients are - done drawing a frame, so the user gets additional latency and - judder. - - The goal is to move this operation out to the compositing manager - which already deals with an extra copy of the frame buffer for - many operations. Have the compositing manager create and draw to a - separate pixmap for scanout. It can perform whatever transforms - are required to get the image in the right orientation for the - user. - - 2) Hardware scanout engine size limits. With a single scanout buffer - for the entire screen, it's possible for the user to ask for a - configuration which requires that scanout buffer to be larger than - the hardware is capable of scanning out from. Again, having the - compositing manager create a pixmap for each CRTC will allow for - any configuration where monitor position within the virtual space - isn't limited by the scanout limits. - -In both of these cases, the Sprite transforms are necessary to ensure -that the sprite appears at the desired spot on each CRTC and with the -right shape. - -1.99 Acknowledgements - -Our thanks to the contributors to the design found on the xpert mailing -list, in particular: - -Alan Hourihane for work on the early implementation -Andrew C. Aitchison for help with the XFree86 DDX implementation -Andy Ritger for early questions about how mergefb/Xinerama work with RandR -Carl Worth for editing the specification and Usenix paper -David Dawes for XFree86 DDX integration work -Thomas Winischhofer for the hardware-accelerated SiS rotation implementation -Matthew Tippett and Kevin Martin for splitting outputs and CRTCs to more -fully expose what video hardware can do - - ❧❧❧❧❧❧❧❧❧❧❧ - -2. Screen change model - -Screens may change dynamically, either under control of this extension, or -due to external events. Examples include: monitors being swapped, pressing a -button to switch from internal display to an external monitor on a laptop, -or, eventually, the hotplug of a display card entirely on busses such as -Cardbus or Express Card which permit hot-swap (which will require other work -in addition to this extension). - -Since the screen configuration is dynamic and asynchronous to the client and -may change at any time RandR provides mechanisms to ensure that your clients -view is up to date with the configuration possibilities of the moment and -enforces applications that wish to control the configuration to prove that -their information is up to date before honoring requests to change the -screen configuration (by requiring a timestamp on the request). - -Interested applications are notified whenever the screen configuration -changes, providing the current size of the screen and subpixel order (see -the Render extension [RENDER]), to enable proper rendering of subpixel -decimated client text to continue, along with a time stamp of the -configuration change. A client must refresh its knowledge of the screen -configuration before attempting to change the configuration after a -notification, or the request will fail. - -To avoid multiplicative explosion between orientation, reflection and sizes, -the sizes are only those sizes in the normal (0) rotation. - -Rotation and reflection and how they interact can be confusing. In Randr, -the coordinate system is rotated in a counter-clockwise direction relative -to the normal orientation. Reflection is along the window system coordinate -system, not the physical screen X and Y axis, so that rotation and -reflection do not interact. The other way to consider reflection is to is -specified in the "normal" orientation, before rotation, if you find the -other way confusing. - -We expect that most clients and toolkits will be oblivious to changes to the -screen structure, as they generally use the values in the connections Display -structure directly. By toolkits updating the values on the fly, we believe -pop-up menus and other pop up windows will position themselves correctly in -the face of screen configuration changes (the issue is ensuring that pop-ups -are visible on the reconfigured screen). - - ❧❧❧❧❧❧❧❧❧❧❧ - -3. Data Types - -The subpixel order is shared with the Render extension, and is documented -there. The only datatype defined is the screen size, defined in the normal -(0 degree) orientation. - - ❧❧❧❧❧❧❧❧❧❧❧ - -4. Errors - -Errors are sent using core X error reports. - -Output - A value for an OUTPUT argument does not name a defined OUTPUT. -CRTC - A value for a CRTC argument does not name a defined CRTC. -Mode - A value for a MODE argument does not name a defined MODE. - - ❧❧❧❧❧❧❧❧❧❧❧ - -5. Protocol Types - -RRCONFIGSTATUS { Success - InvalidConfigTime - InvalidTime - Failed } - - A value of type RRCONFIGSTATUS returned when manipulating the output - configuration or querying information from the server that has some - time-dependency. - - InvalidConfigTime indicates that the supplied configuration - timestamp does not match the current X server configuration - timestamp. Usually this means that the output configuration has - changed since the timestamp was received by the application. - - InvalidTime indicates that the supplied output reconfiguration time - is earlier than the most recent output reconfiguration request. - Generally this indicates that another application has reconfigured - the output using a later timestamp. - - Failed is returned whenever the operation is unsuccessful for some - other reason. This generally indicates that the requested output - configuration is unsupported by the hardware. The goal is to make - these limitations expressed by the protocol, but when that isn't - possible it is correct to return this error value. If, as a - implentor, you find this error code required, please submit the - hardware constraints that exist so that a future version of the - extension can correctly capture the configuration constraints in - your system. - -ROTATION { Rotate_0 - Rotate_90 - Rotate_180 - Rotate_270 - Reflect_X - Reflect_Y } - - These values are used both to indicate a set of allowed rotations - and reflections as well as to indicate a specific rotation and - reflection combination. - -RRSELECTMASK { RRScreenChangeNotifyMask - RRCrtcChangeNotifyMask (New in version 1.2) - RROutputChangeNotifyMask (New in version 1.2) - RROutputPropertyNotifyMask (New in version 1.2) } - -SIZEID { CARD16 } - -MODE { XID or None } - -CRTC { XID } - -OUTPUT { XID } - -CONNECTION { Connected, Disconnected, UnknownConnection } - - This value provides an indication of whether an output is actually - connected to a monitor or other presentation device. - -SUBPIXELORDER { SubPixelUnknown The subpixel order uses the Render - SubPixelHorizontalRGB extensions definitions; they are here - SubPixelHorizontalBGR only for convenience. - SubPixelVerticalRGB - SubPixelVerticalBGR - SubPixelNone } - -SCREENSIZE { widthInPixels, heightInPixels: CARD16 - widthInMillimeters, heightInMillimeters: CARD16 } - -MODEFLAG { HSyncPositive - HSyncNegative - VSyncPositive - VSyncNegative - Interlace - DoubleScan - CSync - CSyncPositive - CSyncNegative - HSkewPresent - BCast - PixelMultiplex - DoubleClock - ClockDivideBy2 } - -MODEINFO { id: MODE - name: STRING - width, height: CARD16 - dotClock: CARD32 - hSyncStart, hSyncEnd, hTotal, hSkew: CARD16 - vSyncStart, vSyncEnd, vTotal: CARD16 - modeFlags: SETofMODEFLAG } - -REFRESH { rates: LISTofCARD16 } - - ❧❧❧❧❧❧❧❧❧❧❧ - -5.4. Protocol Types added in version 1.4 of the extension - -SCANOUTPIXMAPINFO { format: PICTFORMAT - maxWidth, maxHeight: CARD16 - rotations: SETofROTATION } - - 'format' is the format of the pixels within the scanout - pixmap. Only 'Direct' formats are supported, this will never - be an 'Indexed' format. - - 'maxWidth' and 'maxHeight' define the largest supported - scanout pixmap. There is no minimum size; scanout pixmaps down - to 1x1 may be created. - - 'rotations' lists the set of rotations which can be provided - without additional latency or memory usage within the - environment. This typically means that they are supported - directly by the hardware. It is expected that a compositing - manager will perform other transforms as a part of the - compositing process in conjunction with the sprite transforms - described in this extension. - -CRTCCONFIG { crtc: CRTC - x, y: INT16 - mode: MODE - rotation: ROTATION - sprite-position-transform: TRANSFORM - sprite-image-transform: TRANSFORM - outputs: LISTofOUTPUT - pixmap: PIXMAP, None or CurrentScanoutPixmap - pixmap-x, pixmap-y: INT16 } - - The sprite-position-transform and sprite-image-transform - values are used as in the RRSetCrtcSpriteTransform request - position-transform and image-transform parameters. - - 'pixmap' specifies the origin of the pixel data to be presented on - 'crtc'. If 'pixmap' is None, then data will be presented from - the screen pixmap. If 'pixmap' is 'CurrentScanoutPixmap', then - whatever source is currently in use will remain in use, whether - that is the screen pixmap or some other allocated scanout pixmap. - - 'pixmap-x' and 'pixmap-y' specify the origin of the scanout - data within the pixmap, the area from that location to - pixmap-x + width-of(mode), pixmap-y + height-of(mode) is what - will be seen on the connected outputs. - - The pixmap value must specify a scanout pixmap as created by - RRCreateScanoutPixmap, or a Match error results. - - The specified pixmap must be at least as large as the area to - be scanned out, or a Match error results. - - The specified pixmap must have had the specified 'rotation' - included as a part of its creation paramaeters, or a Match - error results. - - If 'pixmap' is destroyed while still being used as a scanout - pixmap, then the associated CRTC will have its scanout pixmap - set back to None, the CRTC origin set back to 0,0 (to make - sure it fits) and the screen pixmap width and height increased - to be at least as big as the current CRTC mode. - - ❧❧❧❧❧❧❧❧❧❧❧ - -6. Extension Initialization - -The name of this extension is "RANDR". - -┌─── - RRQueryVersion - client-major-version: CARD32 - client-minor-version: CARD32 - ▶ - major-version: CARD32 - minor-version: CARD32 -└─── - - The client sends the highest supported version to the server - and the server sends the highest version it supports, but no - higher than the requested version. Major versions changes can - introduce incompatibilities in existing functionality, minor - version changes introduce only backward compatible changes. - It is the clients responsibility to ensure that the server - supports a version which is compatible with its expectations. - - ❧❧❧❧❧❧❧❧❧❧❧ - -7. Extension Requests - -┌─── - RRSelectInput - window: WINDOW - enable: SETofRRSELECTMASK -└─── - Errors: Window, Value - - If 'enable' is RRScreenChangeNotifyMask, RRScreenChangeNotify events - will be sent when the screen configuration changes, either from - this protocol extension, or due to detected external screen - configuration changes. RRScreenChangeNotify may also be sent when - this request executes if the screen configuration has changed since - the client connected, to avoid race conditions. - - New for version 1.2: - - If 'enable' contains RRCrtcChangeMask, RRCrtcChangeNotify events - will be sent when a the configuration for a CRTC associated with the - screen changes, either through this protocol extension or due to - detected external changes. RRCrtcChangeNotify may also be sent when - this request executes if the CRTC configuration has changed since - the client connected, to avoid race conditions. - - If 'enable' contains RROutputChangeMask, RROutputChangeNotify events - will be sent when a the configuration for an output associated with - the screen changes, either through this protocol extension or due to - detected external changes. RROutputChangeNotify may also be sent - when this request executes if the output configuration has changed - since the client connected, to avoid race conditions. - - If 'enable' contains RROutputPropertyNotifyMask, - RROutputPropertyNotify events will be sent when properties change on - this output. - -┌─── - RRSetScreenConfig - window: WINDOW - timestamp: TIMESTAMP - config-timestamp: TIMESTAMP - size-id: SIZEID - rotation: ROTATION - rate: CARD16 - ▶ - status: RRCONFIGSTATUS - new-timestamp: TIMESTAMP - config-timestamp: TIMESTAMP - root: WINDOW - subpixelOrder: SUBPIXELORDER -└─── - Errors: Value, Match - - If 'timestamp' is less than the time when the configuration was last - successfully set, the request is ignored and InvalidTime returned in - status. - - If 'config-timestamp' is not equal to when the server's screen - configurations last changed, the request is ignored and - InvalidConfigTime returned in status. This could occur if the - screen changed since you last made a RRGetScreenInfo request, - perhaps by a different piece of display hardware being installed. - Rather than allowing an incorrect call to be executed based on stale - data, the server will ignore the request. - - 'rate' contains the desired refresh rate. If it is zero, the server - selects an appropriate rate. - - This request may fail for other indeterminate reasons, in which case - 'status' will be set to Failed and no configuration change will be - made. - - This request sets the screen to the specified size, rate, rotation - and reflection. - - When this request succeeds, 'status' contains Success and the - requested changes to configuration will have been made. - - 'new-time-stamp' contains the time at which this request was - executed. - - 'config-timestamp' contains the time when the possible screen - configurations were last changed. - - 'root' contains the root window for the screen indicated by the - window. - - 'subpixelOrder' contains the resulting subpixel order of the screen - to allow correct subpixel rendering. - - Value errors are generated when 'rotation', 'rate' or 'size-id' - are invalid. - -┌─── - RRGetScreenInfo - window: WINDOW - ▶ - rotations: SETofROTATION - root: WINDOW - timestamp: TIMESTAMP - config-timestamp: TIMESTAMP - size-id: SIZEID - rotation: ROTATION - rate: CARD16 - sizes: LISTofSCREENSIZE - refresh: LISTofREFRESH -└─── - - Errors: Window - - RRGetScreenInfo returns information about the current and available - configurations for the screen associated with 'window'. - - 'rotations' contains the set of rotations and reflections supported - by the screen. - - 'root' is the root window of the screen. - - 'config-timestamp' indicates when the screen configuration - information last changed: requests to set the screen will fail - unless the timestamp indicates that the information the client - is using is up to date, to ensure clients can be well behaved - in the face of race conditions. - - 'timestamp' indicates when the configuration was last set. - - 'size-id' indicates which size is active. - - 'rate' is the current refresh rate. This is zero when the refresh - rate is unknown or on devices for which refresh is not relevant. - - 'sizes' is the list of possible frame buffer sizes (at the normal - orientation. Each size indicates both the linear physical size of - the screen and the pixel size. - - 'refresh' is the list of refresh rates for each size. Each element - of 'sizes' has a corresponding element in 'refresh'. An empty list - indicates no known rates, or a device for which refresh is not - relevant. - - The default size of the screen (the size that would become the - current size when the server resets) is the first size in the - list. - -7.1. Extension Requests added in version 1.2 of the extension - -As introduced above, version 1.2 of the extension splits the screen size -from the crtc and output configuration, permitting the subset of the screen -presented by multiple outputs to be configured. As a separate notion, the -size of the screen itself may be arbitrarily configured within a defined -range. As crtcs and outputs are added and removed from the system, the set -returned by the extension will change so that applications can detect -dynamic changes in the display environment. - -┌─── - RRGetScreenSizeRange - window: WINDOW - ▶ - CARD16 minWidth, minHeight - CARD16 maxWidth, maxHeight -└─── - Errors: Window - - Returns the range of possible screen sizes. The screen may be set to - any size within this range. - -┌─── - RRSetScreenSize - window: WINDOW - width: CARD16 - height: CARD16 - width-in-millimeters: CARD32 - height-in-millimeters: CARD32 -└─── - Errors: Window, Match, Value - - Sets the screen to the specified size. 'width' and 'height' must be - within the range allowed by GetScreenSizeRanges, otherwise a Value - error results. All active monitors must be configured to display a - subset of the specified size, else a Match error results. - - 'width-in-millimeters' and 'height-in-millimeters' can be set to - reflect the physical size of the screen reported both through this - extension and the core protocol. They must be non-zero, or Value - error results. - - If panning is enabled, the width and height of the panning and the - tracking areas are adapted to the new size and clamped afterwards. - Disabled panning axes remain disabled. - Panning borders are disabled if their requirements are no longer met - (see RRSetPanning). - -┌─── - RRGetScreenResources - window: WINDOW - ▶ - timestamp: TIMESTAMP - config-timestamp: TIMESTAMP - crtcs: LISTofCRTC - outputs: LISTofOUTPUT - modes: LISTofMODEINFO -└─── - Errors: Window - - RRGetScreenResources returns the list of outputs and crtcs connected - to the screen associated with 'window'. - - 'timestamp' indicates when the configuration was last set. - - 'config-timestamp' indicates when the configuration information last - changed. Requests to configure the output will fail unless the - timestamp indicates that the information the client is using is up - to date, to ensure clients can be well behaved in the face of race - conditions. - - 'crtcs' contains the list of CRTCs associated with the screen. - - 'outputs' contains the list of outputs associated with the screen. - - 'modes' contains the list of modes associated with the screen - - This request explicitly asks the server to ensure that the - configuration data is up-to-date wrt the hardware. If that requires - polling, this is when such polling would take place. If the - current configuration is all that's required, use - RRGetScreenResourcesCurrent instead. - -┌─── - RRGetOutputInfo - output: OUTPUT - config-timestamp: TIMESTAMP - ▶ - status: RRCONFIGSTATUS - timestamp: TIMESTAMP - crtc: CRTC - - name: STRING - connection: CONNECTION - subpixel-order: SUBPIXELORDER - widthInMillimeters, heightInMillimeters: CARD32 - crtcs: LISTofCRTC - clones: LISTofOUTPUT - modes: LISTofMODE - num-preferred: CARD16 -└─── - Errors: Output - - RRGetOutputInfo returns information about the current and available - configurations 'output'. - - If 'config-timestamp' does not match the current configuration - timestamp (as returned by RRGetScreenResources), 'status' is set to - InvalidConfigTime and the remaining reply data is empty. Otherwise, - 'status' is set to Success. - - 'timestamp' indicates when the configuration was last set. - - 'crtc' is the current source CRTC for video data, or Disabled if the - output is not connected to any CRTC. - - 'name' is a UTF-8 encoded string designed to be presented to the - user to indicate which output this is. E.g. "S-Video" or "DVI". - - 'connection' indicates whether the hardware was able to detect a - device connected to this output. If the hardware cannot determine - whether something is connected, it will set this to - UnknownConnection. - - 'subpixel-order' contains the resulting subpixel order of the - connected device to allow correct subpixel rendering. - - 'widthInMillimeters' and 'heightInMillimeters' report the physical - size of the displayed area. If unknown, or not really fixed (e.g., - for a projector), these values are both zero. - - 'crtcs' is the list of CRTCs that this output may be connected to. - Attempting to connect this output to a different CRTC results in a - Match error. - - 'clones' is the list of outputs which may be simultaneously - connected to the same CRTC along with this output. Attempting to - connect this output with an output not in the 'clones' list - results in a Match error. - - 'modes' is the list of modes supported by this output. Attempting to - connect this output to a CRTC not using one of these modes results - in a Match error. - - The first 'num-preferred' modes in 'modes' are preferred by the - monitor in some way; for fixed-pixel devices, this would generally - indicate which modes match the resolution of the output device. - -┌─── - RRListOutputProperties - output:OUTPUT - ▶ - atoms: LISTof ATOM -└─── - Errors: Output - - This request returns the atoms of properties currently defined on - the output. - -┌─── - RRQueryOutputProperty - output: OUTPUT - property: ATOM - ▶ - pending: BOOL - range: BOOL - immutable: BOOL - valid-values: LISTofINT32 -└─── - Errors: Name, Atom, Output - - If the specified property does not exist for the specified output, - then a Name error is returned. - - If 'pending' is TRUE, changes made to property values with - RRChangeOutputProperty will be saved in the pending property value - and be automatically copied to the current value on the next - RRSetCrtcConfig request involving the named output. If 'pending' is - FALSE, changes are copied immediately. - - If 'range' is TRUE, then the valid-values list will contain - precisely two values indicating the minimum and maximum allowed - values. If 'range' is FALSE, then the valid-values list will contain - the list of possible values; attempts to set other values will - result in a Value error. - - If 'immutable' is TRUE, then the property configuration cannot be - changed by clients. Immutable properties are interpreted by the X - server. - -┌─── - RRConfigureOutputProperty - output: OUTPUT - property: ATOM - pending: BOOL - range: BOOL - valid-values: LISTofINT32 -└─── - Errors: Access, Name, Atom, Output - - If the specified property is 'immutable', an Access error is - returned. - - Otherwise, the configuration of the specified property is changed to - the values provided in this request. - - If the specified property does not exist for the specified output, - it is created with an empty value and None type. - -┌─── - RRChangeOutputProperty - output: OUTPUT - property, type: ATOM - format: {8, 16, 32} - mode: { Replace, Prepend, Append } - data: LISTofINT8 or LISTofINT16 or LISTofINT32 -└─── - Errors: Alloc, Atom, Match, Value, Output - - This request alters the value of the property for the specified - output. If the property is marked as a 'pending' property, only the - pending value of the property is changed. Otherwise, changes are - reflected in both the pending and current values of the property. - The type is uninterpreted by the server. The format specifies - whether the data should be viewed as a list of 8-bit, 16-bit, or - 32-bit quantities so that the server can correctly byte-swap as - necessary. - - If the mode is Replace, the previous property value is discarded. - If the mode is Prepend or Append, then the type and format must - match the existing property value (or a Match error results). If - the property is undefined, it is treated as defined with the correct - type and format with zero-length data. - - For Prepend, the data is tacked on to the beginning of the existing - data, and for Append, it is tacked on to the end of the existing data. - - This request generates a OutputPropertyNotify - - The lifetime of a property is not tied to the storing client. - Properties remain until explicitly deleted, until the output is - destroyed, or until server reset (see section 10). - - The maximum size of a property is server-dependent and may vary - dynamically. - -┌─── - RRDeleteOutputProperty - output: OUTPUT - property: ATOM -└─── - Errors: Atom, Output - - This request deletes the property from the specified window if the - property exists and generates a OutputPropertyNotify event unless - the property does not exist. - -┌─── - RRGetOutputProperty - output: OUTPUT - property: ATOM - type: ATOM or AnyPropertyType - long-offset, long-length: CARD32 - delete: BOOL - pending: BOOL - ▶ - type: ATOM or None - format: {0, 8, 16, 32} - bytes-after: CARD32 - value: LISTofINT8 or LISTofINT16 or LISTofINT32 -└─── - Errors: Atom, Value, Output - - If the specified property does not exist for the specified output, - then the return type is None, the format and bytes-after are zero, - and the value is empty. The delete argument is ignored in this - case. - - If the specified property exists but its type does not match the - specified type, then the return type is the actual type of the - property, the format is the actual format of the property (never - zero), the bytes-after is the length of the property in bytes (even - if the format is 16 or 32), and the value is empty. The delete - argument is ignored in this case. - - If the specified property exists and either AnyPropertyType is - specified or the specified type matches the actual type of the - property, then the return type is the actual type of the property, - the format is the actual format of the property (never zero), and - the bytes-after and value are as follows, given: - - N = actual length of the stored property in bytes - (even if the format is 16 or 32) - I = 4 × offset - T = N - I - L = MINIMUM(T, 4 × long-length) - A = N - (I + L) - - If 'pending' is true, and if the property holds a pending value, - then the value returned will be the pending value of the property - rather than the current value. The returned value starts at byte - index I in the property (indexing from 0), and its length in bytes - is L. However, it is a Value error if long-offset is given such - that L is negative. The value of bytes-after is A, giving the - number of trailing unread bytes in the stored property. If delete - is True and the bytes-after is zero, the property is also deleted - from the output, and a RROutputPropertyNotify event is generated. - -┌─── - RRCreateMode - window: WINDOW - modeinfo: MODEINFO - ▶ - mode: MODE -└─── - Errors: Window, Name, Value - - 'modeinfo' provides a new mode for outputs on the screen - associated with 'window'. If the name of 'modeinfo' names an - existing mode, a Name error is returned. If some parameter of the - mode is not valid in some other way, a Value error is returned. - - The returned 'mode' provides the id for the mode. - -┌─── - RRDestroyMode - mode: MODE -└─── - Errors: Mode, Access - - The user-defined 'mode' is destroyed. 'mode' must name a mode - defined with RRCreateMode, else an Match error is returned. If - 'mode' is in use by some CRTC or Output, then an Access error is - returned. - -┌─── - RRAddOutputMode - output: OUTPUT - mode: MODE -└─── - Errors: Output, Mode, Match - - 'output' indicates which output is to be configured. - - 'mode' specifies which mode to add. If 'mode' is not valid for - 'output', then a Match error is generated. - - This request generates OutputChangeNotify events. - -┌─── - RRDeleteOutputMode - output: OUTPUT - mode: MODE -└─── - Errors: Output, Mode - - 'output' indicates which output is to be configured. - - 'mode' specifies which mode to delete. 'mode' must have been added - with RRAddOutputMode, else an Access error is returned. 'mode' must - not be active, else a Match error is returned. - - This request generates OutputChangeNotify events. - -┌─── - RRGetCrtcInfo - crtc: CRTC - config-timestamp: TIMESTAMP - ▶ - status: RRCONFIGSTATUS - timestamp: TIMESTAMP - x, y: INT16 - width, height: CARD16 - mode: MODE - rotation: ROTATION - outputs: LISTofOUTPUT - - rotations: SETofROTATION - possible-outputs: LISTofOUTPUT -└─── - - Errors: Window - - RRGetCrtcModes returns information about the current and available - configurations for the specified crtc connected to the screen - associated with 'window'. - - If 'config-timestamp' does not match the current configuration - timestamp (as returned by RRGetScreenResources), 'status' is set to - InvalidConfigTime and the remaining reply data is empty. Otherwise, - 'status' is set to Success. - - 'timestamp' indicates when the configuration was last set. - - 'x' and 'y' indicate the position of this CRTC within the screen - region. They will be set to 0 when the CRTC is disabled. - - 'width' and 'height' indicate the size of the area within the screen - presented by this CRTC. This may be different than the size of the - mode due to rotation. They will be set to 0 when the CRTC - is disabled. - - 'mode' indicates which mode is active, or None indicating that the - CRTC has been disabled and is not displaying the screen contents. - - 'rotation' indicates the active rotation. It is set to Rotate_0 - when the CRTC is disabled. - - 'outputs' is the list of outputs currently connected to this CRTC - and is empty when the CRTC is disabled. - - 'rotations' contains the set of rotations and reflections supported - by the CRTC. - - 'possible-outputs' lists all of the outputs which may be connected - to this CRTC. - -┌─── - RRSetCrtcConfig - crtc: CRTC - timestamp: TIMESTAMP - config-timestamp: TIMESTAMP - x, y: INT16 - mode: MODE - rotation: ROTATION - outputs: LISTofOUTPUT - ▶ - status: RRCONFIGSTATUS - new-timestamp: TIMESTAMP -└─── - Errors: Value, Match - - If 'timestamp' is less than the time when the configuration was last - successfully set, the request is ignored and InvalidTime returned in - status. - - If 'config-timestamp' is not equal to when the monitor's - configuration last changed, the request is ignored and - InvalidConfigTime returned in status. This could occur if the - monitor changed since you last made a RRGetScreenInfo request, - perhaps by a different monitor being connected to the machine. - Rather than allowing an incorrect call to be executed based on stale - data, the server will ignore the request. - - 'x' and 'y' contain the desired location within the screen for this - monitor's content. 'x' and 'y' must be within the screen size, else - a Value error results. - - 'mode' is either the desired mode or None indicating the CRTC should - be disabled. If 'mode' is not one of these values, a Value - error results. 'mode' must be valid for all of the configured outputs, - else a Match error. - - 'rotation' contains the desired rotation along with which - reflections should be enabled. The rotation and reflection values - must be among those allowed for this monitor, else a Value error - results. - - 'outputs' contains the set of outputs that this CRTC should be - connected to. The set must be among the list of acceptable output - sets for this CRTC or a Match error results. - - If 'mode' is None, then 'outputs' must be empty, else a Match error - results. Conversely, if 'mode' is not None, then 'outputs' must not be - empty, else a Match error results. - - This request may fail for other indeterminate reasons, in which case - 'status' will be set to Failed and no configuration change will be - made. - - This request sets the CRTC to the specified position, mode, rotation - and reflection. The entire area of the CRTC must fit within the - screen size, else a Match error results. As an example, rotating the - screen so that a single CRTC fills the entire screen before and - after may necessitate disabling the CRTC, resizing the screen, - then re-enabling the CRTC at the new configuration to avoid an - invalid intermediate configuration. - - If panning is enabled, the width and height of the panning and the - tracking areas are clamped to the new mode size. - Disabled panning axes remain disabled. - Panning borders are disabled if their requirements are no longer met - (see RRSetPanning). - - When this request succeeds, 'status' contains Success and the - requested changes to configuration will have been made. - - 'new-time-stamp' contains the time at which this request was - executed. - -┌─── - RRGetCrtcGammaSize - crtc: CRTC - ▶ - size: CARD16 -└─── - Errors: Crtc - - This request returns the size of the gamma ramps used by 'crtc'. - -┌─── - RRGetCrtcGamma - crtc: CRTC - ▶ - red: LISTofCARD16 - green: LISTofCARD16 - blue: LISTofCARD16 -└─── - Errors: Crtc - - This request returns the currently set gamma ramps for 'crtc'. All - three lists will be the size returned by the RRGetCrtcGammaSize - request. - -┌─── - RRSetCrtcGamma - crtc: CRTC - red: LISTofCARD16 - green: LISTofCARD16 - blue: LISTofCARD16 -└─── - Errors: Crtc, Match - - This request sets the gamma ramps for 'crtc'. All three lists - must be the size returned by RRGetCrtcGammaSize else a Value error - results. - -7.2. Extension Requests added in version 1.3 of the extension - -┌─── - RRGetScreenResourcesCurrent - window: WINDOW - ▶ - timestamp: TIMESTAMP - config-timestamp: TIMESTAMP - crtcs: LISTofCRTC - outputs: LISTofOUTPUT - modes: LISTofMODEINFO -└─── - Errors: Window - - RRGetScreenResourcesCurrent returns the list of outputs and crtcs - connected to the screen associated with 'window'. - - 'timestamp' indicates when the configuration was last set. - - 'config-timestamp' indicates when the configuration information last - changed. Requests to configure the output will fail unless the - timestamp indicates that the information the client is using is up - to date, to ensure clients can be well behaved in the face of race - conditions. - - 'crtcs' contains the list of CRTCs associated with the screen. - - 'outputs' contains the list of outputs associated with the screen. - - 'modes' contains the list of modes associated with the screen. - - Unlike RRGetScreenResources, this merely returns the current - configuration, and does not poll for hardware changes. - -┌─── - RRSetCrtcTransform - crtc: CRTC - transform: TRANSFORM - filter: STRING8 - values: LISTofFIXED -└─── - Errors: Crtc, Match - - This request provides a mechanism that is more general than the - existing rotation and reflection values for describing the - transformation from frame buffer image to crtc presentation. - 'transform' is a full 2D projective transformation from screen - coordinate space to crtc coordinate space. This transformation is - applied before the rotation and reflection values to compute the - complete transform. - - 'filter' and 'values' specify a Render filter that may be used by the - server when transforming data from frame buffer to crtc. - - This request sets the transform to be used at the next - RRSetCrtcConfig request execution; it does not cause any change to - occur in the current configuration. - - When a non-identity transformation is in use, the rectangle returned - by RRGetCrtcInfo defines the bounding rectangle of the screen that is - projected to the crtc. It is this projected rectangle which must be - within the area of the screen when the mode is set. - -┌─── - RRGetCrtcTransform - crtc: CRTC - ▶ - pending-transform: TRANSFORM - pending-filter: STRING8 - pending-values: LISTofFIXED - current-transform: TRANSFORM - current-filter: STRING8 - current-values: LISTofFIXED -└─── - - This request returns the pending and current transforms for the - specified CRTC. The pending transform will be the same as the current - transform if no new pending transform has been set since the last call - to RRSetCrtcConfig. - -┌─── - RRGetPanning - crtc: CRTC - ▶ - status: RRCONFIGSTATUS - timestamp: TIMESTAMP - left, top, width, height: CARD16 - track_left, track_top, track_width, track_height: CARD16 - border_left, border_top, border_right, border_bottom: INT16 -└─── - - Errors: Crtc - - Version 1.3 adds panning support again. If multiple crtcs are active - the panning behavior can be defined per crtc individually. - RRGetPanning returns information about the currently set panning - configuration for the specified crtc. If the CRTC does not support - panning, all fields (except timestamp) will be 0. - - 'timestamp' indicates when the configuration was last set. - - All other entries are explained for RRSetPanning. - -┌─── - RRSetPanning - crtc: CRTC - timestamp: TIMESTAMP - left, top, width, height: CARD16 - track_left, track_top, track_width, track_height: CARD16 - border_left, border_top, border_right, border_bottom: INT16 - ▶ - status: RRCONFIGSTATUS - new-timestamp: TIMESTAMP -└─── - Errors: Crtc, Match - - This request sets the panning parameters. As soon as panning is - enabled, the CRTC position can change with every pointer move. - RRCrtcChangeNotify events are sent to the clients requesting those. - - If 'timestamp' is less than the time when the configuration was last - successfully set, the request is ignored and InvalidTime returned in - status. - - ┌──┳━━━━━━━━━━━━━━┳─────┬ ─ ─ ─ ─ ─ ┐ - │ ┃ CRTC ┃ │ - │ ┃ ┃ │ │ - │ ┃ X┃→ │ - │ ┃ ┃ │ │ framebuffer - │ ┗━━━━━━━━━━━━━━┛ │ - │ │ │ - │panning area │ - └───────────────────────┴ ─ ─ ─ ─ ─ ┘ - - 'left', 'top', 'width', and 'height' contain the total panning area - for this CRTC. 'width' has to be larger than or equal to the CRTC's - width or 0, and 'left'+'width' must be within the screen size, else a - Match error results. Equivalent restrictions for the height exist. - 'width' or 'height' set to 0 indicate that panning should be disabled - on the according axis. Setting 'width'/'height' to the CRTC's - width/height will disable panning on the X/Y axis as well, but - RRSetScreenSize will silently enable panning if the screen size is - increased. This does not happen if set to 0. - - ┌────────┳━━━━━━━━━━━━━━┳ ─ ─ ─ ─ ─ ┐ - │ ┃ CRTC ┃ - │ ┃ ┃ │ - │ ┃ ┃ - │ ┃ ┃ │ tracking area - │ ┗━━━━━━━━━━━━━━┫ X - │ ↓ │ ↓ │ - │panning area │ - └───────────────────────┴ ─ ─ ─ ─ ─ ┘ - - 'track_left', 'track_top', 'track_width', and 'track_height' contain - the pointer area for which the panning region is updated. For normal - use cases it should enclose the panning area minus borders, and is - typically set to either the panning area minus borders, or to the - total screen size. If set to the total screen size, the CRTC will pan - in the remaining axis even if the pointer is outside the panning area - on a different CRTC, as shown in the figure above. If the pointer is - outside the tracking area, the CRTC will not pan. Zero can be used as - an alias for the total screen size. - - ┌──┳━━━━━━━━━━━━━━┳────────────┐ - │ ┃ CRTC ┃ │ - │ ┃ ┃ │ - │ ┃ ┃→ │ - │ ┃ X←→┃ │ - │ ┃ border_right │ - │ ┗━━━━━━━━━━━━━━┛ │ - │ │ - │panning area │ - └──────────────────────────────┘ - - 'border_left', 'border_top', 'border_right', and 'border_bottom' - define the distances from the CRTC borders that will activate panning - if the pointer hits them. If the borders are 0, the screen will pan - when the pointer hits the CRTC borders (behavior of pre-RandR Xserver - panning). If the borders are positive, the screen will pan when the - pointer gets close to the CRTC borders, if they are negative, the - screen will only pan when the pointer is already way past the CRTC - borders. Negative values might confuse users and disable panning to - the very edges of the screen. Thus they are discouraged. - border_left + border_right has to be lower or equal than the CRTC's - width, else a Match error results. An equivalent restriction for the - height exists. - - Screen size changes update the panning and the tracking areas to the - new size. Both screen size changes and mode changes clamp these areas - to the current CRTC size. In these cases panning borders are disabled - if their requirements are no longer met. - - When this request succeeds, 'status' contains Success and the - requested changes to configuration will have been made. - - 'new-time-stamp' contains the time at which this request was - executed. - -┌─── - RRSetOutputPrimary - window: WINDOW - output: OUTPUT -└─── - Errors: Match, Output, Window - - RRSetOutputPrimary marks 'output' as the primary output for the - screen with the same root window as 'window'. This output's CRTC - will be sorted to the front of the list in Xinerama and RANDR - geometry requests for the benefit of older applications. The - default primary output is None, and None is a legal value to pass - to RRSetOutputPrimary. This request is expected to be used by - desktop environments to mark the screen that should hold the primary - menu bar or panel. - - As this changes the logical layout of the screen, ConfigureNotify - and RRScreenChangeNotify will be generated on the appropriate root - window when the primary output is changed by this call. This request - also generates RROutputChangeNotify events on the outputs that gained - and lost primary status. - - If an output is disconnected asynchronously (eg. due to recabling), - the primary status does not change, but RROutputChangeNotify events - will be generated if the hardware is capable of detecting this; - clients are expected to reconfigure if appropriate. - - If an output is deleted (eg. due to device hotplug), the server will - act as though None was passed to RRSetOutputPrimary, including - generating the appropriate events. - -┌─── - RRGetOutputPrimary - window: WINDOW - ▶ - output: OUTPUT -└─── - Errors: Window - - RRGetOutputPrimary returns the primary output for the screen. - - ❧❧❧❧❧❧❧❧❧❧❧ - -7.3. Extension Requests added in version 1.4 of the extension. - -┌─── - RRQueryScanoutPixmaps - window: WINDOW - ▶ - infos: LISTofSCANOUTPIXMAPINFO -└─── - Errors: Window - - This request returns information about the server support for - alternate scanout pixmaps. For each pictformat, there is a set - of rotations and a maximum supported size. The rotations here - are those provided by the scanout hardware itself, not by - software emulation. - -┌─── - RRCreateScanoutPixmap - pixmap: PIXMAP - drawable: DRAWABLE - width, height: CARD16 - format: PICTFORMAT - rotations: SETofROTATION -└─── - Errors: Drawable, Match, Value - - Creates a pixmap which can subsequently be used as a scanout - buffer for the screen associated with 'drawable'. 'rotations' - is the set of rotation values which may be used with the - resulting scanout buffer when it is associated with a CRTC. - - 'format' must be one of the supported scanout formats, or a - Match error results. - - 'width' and 'height' must be within the supported range for - the specified format or a Value error results. - - 'rotations' must be a subset of those supported for the - specified format or a Match error results. - -┌─── - RRSetCrtcSpriteTransform - crtc: CRTC - position-transform: TRANSFORM - image-transform: TRANSFORM -└─── - Sets the sprite transforms for the specified crtc, any sprites - presented on this crtc will have their positions transformed - by the position-transform matrix. Sprite images displayed on the crtc - will be transformed by the image-transform matrix. - -┌─── - RRGetCrtcSpriteTransform - crtc: CRTC - ▶ - position-transform: TRANSFORM - image-transform: TRANSFORM -└─── - Gets the sprite transforms for the specified crtc. - -┌─── - RRSetCrtcConfigs - drawable: DRAWABLE - screen-pixmap-width: CARD16 - screen-pixmap-height: CARD16 - screen-width: CARD16 - screen-height: CARD16 - width-in-millimeters: CARD32 - height-in-millimeters: CARD32 - configs: LISTofCRTCCONFIG - ▶ - status: RRCONFIGSTATUS -└─── - Errors: Value, Match - - This works much like RRSetScreenSize followed by a sequence of - RRSetCrtcConfig, except that the entire configuration is set - in a single operation, either succeeding or failing without - any partial execution. - - In addition to the pre-1.4 semantics, this request adds the - ability to specific a scanout pixmap for each crtc, and - integrates the 1.4 sprite transform request as well. - - ❧❧❧❧❧❧❧❧❧❧❧ - -8. Extension Events - -Clients MAY select for ConfigureNotify on the root window to be -informed of screen changes. This may be advantageous if all your -client needs to know is the size of the root window, as it avoids -round trips to set up the extension. - -RRScreenChangeNotify is sent if RRSelectInput has requested it -whenever properties of the screen change, which may be due to external -factors, such as re-cabling a monitor, etc. - -┌─── - RRScreenChangeNotify - - rotation: ROTATION; new rotation - sequenceNumber: CARD16 low 16 bits of request seq. number - timestamp: TIMESTAMP time screen was changed - configTimestamp: TIMESTAMP time config data was changed - root: WINDOW root window of screen - window: WINDOW window requesting notification - size-id: SIZEID index of new SCREENSIZE - subpixelOrder: SUBPIXELORDER order of subpixels - widthInPixels: CARD16 width in pixels of the new SCREENSIZE - heightInPixels: CARD16 height in pixels of the new SCREENSIZE - widthInMillimeters: CARD16 width in mm of the new SCREENSIZE - heightInMillimeters: CARD16 height in mm of the new SCREENSIZE -└─── - This event is generated whenever the screen configuration is changed - and sent to requesting clients. 'timestamp' indicates when the - screen configuration was changed. 'configTimestamp' says when the - last time the configuration was changed. 'root' is the root of the - screen the change occurred on, 'window' is window selecting for this - event. 'size-id' contains the index of the current size. - - This event is sent whenever the screen's configuration changes - or if a new screen configuration becomes available that was - not available in the past. In this case (config-timestamp in - the event not being equal to the config-timestamp returned in - the last call to RRGetScreenInfo), the client MUST call - RRGetScreenInfo to update its view of possible screen - configurations to have a correct view of possible screen - organizations. - - Clients which select screen change notification events may be - sent an event immediately if the screen configuration was - changed between when they connected to the X server and - selected for notification. This is to prevent a common race - that might occur on log-in, where many applications start up - just at the time when a display manager or log in script might - be changing the screen size or configuration. - - Note that the sizes in this event reflect the new SCREENSIZE and - thus will appear rotated by the 'rotation' parameter from the sizes - of the screen itself. In other words, when rotation is 90 or 270, - widthInPixels in this event will be the same as the height value - from a ConfigureNotify that reflects the same size change. This - will probably confuse developers. - -8.1 Events added in version 1.2 of the RandR extension - -┌─── - RROutputChangeNotify: - timestamp: TIMESTAMP time screen was reconfigured - config-timestamp: TIMESTAMP time available config data was changed - window: WINDOW window requesting notification - output: OUTPUT output affected by change - crtc: CRTC connected CRTC or None - mode: MODE mode in use on CRTC or None - connection: CONNECTION connection status -└─── - - This event is generated whenever the available output configurations - have changed and is sent to requesting clients. 'timestamp' - indicates when the crtc configuration was changed by a client. - 'config-timestamp' says when the last time the available - configurations changed. 'root' is the root of the screen the change - occurred on, 'window' is window selecting for this event. The - precise change can be detected by examining the new state of the - system. - -┌─── - RROutputPropertyNotify: - window: WINDOW window requesting notification - output: OUTPUT output affected by change - atom: ATOM affected property - time: TIMESTAMP time property was changed - subpixel-order: SUBPIXELORDER order of subpixels - state: { NewValue, Deleted } new property state -└─── - - This event is reported to clients selecting RROutputPropertyChange - on the window and is generated with state NewValue when a property - of the window is changed using RRChangeOutputProperty even when - adding zero-length data and when replacing all or part of a property - with identical data. It is generated with state Deleted when a - property of the window is deleted using either - RRDeleteOutputProperty or RRGetOutputProperty. The timestamp - indicates the server time when the property was changed. - -┌─── - RRCrtcChangeNotify - timestamp: TIMESTAMP time monitor was changed - window: WINDOW window requesting notification - crtc: CRTC CRTC which changed - mode: MODE new mode - rotation: ROTATION; new rotation - x: INT16 x position of CRTC within screen - y: INT16 y position of CRTC within screen - width: CARD16 width of new mode - height: CARD16 height of new mode -└─── - This event is generated whenever the CRTC configuration is changed - and sent to requesting clients. 'timestamp' indicates when the - CRTC configuration was changed. 'window' is window selecting for this - event. 'mode' is the new mode, or None if the crtc is disabled. - 'x' and 'y' mark the location in the screen where this CRTC - is reading data. 'width' and 'height' indicate the size of the - mode. 'x', 'y, 'width' and 'height' are all zero when 'mode' is None. - - This event is sent whenever the monitor's configuration changes - or if a new monitor configuration becomes available that was - not available in the past. In this case, the client MUST call - RRGetCrtcModes to update its view of possible monitor - configurations to have a correct view of possible monitor - organizations. - - Clients which select monitor change notification events may be - sent an event immediately if the monitor configuration was - changed between when they connected to the X server and - selected for notification. This is to prevent a common race - that might occur on log-in, where many applications start up - just at the time when a display manager or log in script might - be changing the monitor size or configuration. - - ❧❧❧❧❧❧❧❧❧❧❧ - -9. Properties - -Properties are used for output specific parameters, and for announcing -static or rarely changing data. Announced data is typically -immutable. Properties are also used for evaluating new parameters -before adding them to the RandR protocol. - -The following properties are hereby declared official, and drivers SHOULD -prefix driver specific properties with '_', unless they are planned to be -added to this specification. List values, that are not declared by the table -below, and will remain driver specific or are not planned to be added to this -specification, SHOULD be prefixed with "_" as well in order to avoid name -space or semantics clashes with future extensions of these values. - -Beginning with version 1.3 of the RandR extension, certain properties -are mandatory and MUST be provided by implementations. Earlier -versions of the RandR extension MAY provide these properties as well, -as long as the semantics are not altered. Clients SHOULD fall back -gracefully to lower version functionality, though, if the driver -doesn't handle a mandatory property correctly. - -9.1 Known properties - - "Backlight" aka RR_PROPERTY_BACKLIGHT - Type: int32 - Flags: - - Range/List: 0-x (driver specific) - - This property controls the brightness on laptop panels and equivalent - displays with a backlight controller. The driver specific maximum - value MUST turn the backlight to full brightness, 1 SHOULD turn the - backlight to minimum brightness, 0 SHOULD turn the backlight off. - - "CloneList" aka RR_PROPERTY_CLONE_LIST - Type: int32 [2*n] / Atom pairs - Flags: Immutable - Range/List: 0- - - Some combinations of outputs on some cards cannot be served - independently from each other, because they are wired up to the same - encoder outputs. - This property lists all output + signal format pairs that are - driven together with this output, and thus can only be programmed in - clone mode with the same CRTC. - This property MUST be symmetric, but may change with changing signal - format. I.e. if the property for DVI-1/VGA specifies VGA-1/VGA to be - cloned, VGA-1/VGA has to list DVI-1/VGA as well. - Outputs / format pairs listed in this property MUST be included in the - CompatibilityList. - - "CompatibilityList" aka RR_PROPERTY_COMPATIBILITY_LIST - Type: int32 [2*n] / Atom pairs - Flags: Immutable - Range/List: 0- - - Some combinations of outputs on some cards cannot be served at all, - because the according encoder is only capable of driving one output at - a time. - This property lists all output + signal format pairs that can be - driven together with this output. NULL atoms specify any output / any - signal format, respectively. - This property MUST be symmetric, but may change with changing signal - format. I.e. if the property for DVI-1/TMDS specifies VGA-1/VGA to be - available, VGA-1/VGA has to list DVI-1/TMDS as well. - - "ConnectorNumber" aka RR_PROPERTY_CONNECTOR_NUMBER - Type: int32 - Flags: Immutable, Static - Range/List: 0- - - Outputs that route their signal to the same connector MUST - have the same connector number. Outputs with the same - connector number MUST route their signal to the same - connector, except if it is 0, which indicates unknown - connectivity. 1 is called the primary connector, 2 the - secondary. 3 is typically a TV connector, but that is completely - driver / hardware dependent. - Outputs with the same connector number SHOULD have the same - connector type. Meaning and client behavior for mismatching - connector types is undefined at the moment. - - "ConnectorType" aka RR_PROPERTY_CONNECTOR_TYPE - Type: int32 / Atom - Flags: Immutable, Static - Range/List: unknown VGA DVI DVI‐I DVI‐A DVI‐D HDMI Panel - TV TV-Composite TV-SVideo TV-Component - TV-SCART TV-C4 DisplayPort - - Connector type, as far as known to the driver. - Values with dashes (TV‐Composite) describe more specific versions of - the base values (TV). The former SHOULD be used if the connector is - not capable of producing other signal formats. The later SHOULD be - used if the exact connector is unknown, or the connector is a - multi‐format connector that is not described otherwise. DVI, for - instance, SHOULD be handled like a DVI‐I connector, unless additional - information is available to the user agent. PANEL describes - laptop‐internal (normally LVDS) displays. TV, TV‐SCART, TV‐Component, - and TV‐C4 with signal format VGA are valid combinations and describe - RGB TV signals. - - "EDID" aka RR_PROPERTY_RANDR_EDID - Type: int8 [n] - Flags: Immutable - Range/List: - - - Raw EDID data from the device attached to the according - output. Should include main EDID data and all extension - blocks. Previously known as EdidData. - - "SignalFormat" aka RR_PROPERTY_SIGNAL_FORMAT - Type: int32 / Atom - Flags: - - Range/List: unknown VGA TMDS LVDS Composite Composite-PAL - Composite-NTSC Composite-SECAM SVideo - Component DisplayPort - - Signal format / physical protocol format that is used for the - specified output. valid-values lists all possible formats on this - output, which SHOULD be a subset of the list above and MUST be static. - Values with dashes (Composite-PAL) describe more specific versions of - the base values (Composite) and SHOULD be used if known to the driver. - A driver MAY change this property of an output if the underlying - hardware indicates a protocol change (e.g. TV formats). Clients are - allowed to change the signal format in order to select a different - signal format (e.g. Composite etc.) or physical protocol (e.g. VGA or - TMDS on DVI-I). - Laptop panels SHOULD not be detected with this property, but rather by - ConnectorType. - - "SignalProperties" aka RR_PROPERTY_SIGNAL_FORMAT - Type: int32 [n] / Atom - Flags: - - Range/List: For Composite signals: - NTSC NTSC-M NTSC-J NTSC-N NTSC-4.43 NTSC-film - PAL PAL-B PAL-G PAL-H PAL-H PAL-I PAL-M PAL-D - PAL-N PAL-Nc PAL-L PAL-60 - SECAM SECAM-L SECAM-B SECAM-G SECAM-D SECAM-K - SECAM-H SECAM-K - For TMDS signals: - SingleLink DualLink - For DisplayPort signals: - Lane1 Lane2 Lane4 LowSpeed HiSpeed - - Properties of the signal format that is currently used for the - specified output. valid-values lists all possible properties on this - output, which SHOULD be a subset of the list above. It will change if - SignalFormat changes. Multiple properties are allowed. - Values with dashes (PAL-B) describe more specific versions of the base - values (PAL) and SHOULD be used if known to the driver. A driver MAY - change this property of an output if the underlying hardware indicates - a signal change (e.g. TV formats). Clients are allowed to change the - properties in order to select a different signal subformat. - - -9.2 Properties introduced with version 1.2 of the RandR extension - -Property Immutable Mandatory since -──────── ───────── ─────────────── -EDID yes n/a - -EDID is provided by the RandR frontend, thus not driver specific. - - -9.3 Properties introduced with version 1.3 of the RandR extension - -Property Immutable Mandatory since -──────── ───────── ─────────────── -CloneList yes not mandatory -CompatibilityList yes not mandatory -ConnectorNumber yes: static not mandatory -ConnectorType yes: static RandR 1.3 -SignalFormat no RandR 1.3 -SignalProperties no not mandatory - -9.4 Properties introduced with version 1.3.1 of the RandR extension - -Property Immutable Mandatory since -──────── ───────── ─────────────── -Backlight no not mandatory - - ❧❧❧❧❧❧❧❧❧❧❧ - -10. Extension Versioning - -The RandR extension was developed in parallel with the implementation -to ensure the feasibility of various portions of the design. As -portions of the extension are implemented, the version number of the -extension has changed to reflect the portions of the standard provided. -This document describes the version 1.2 of the specification, the -partial implementations have version numbers less than that. Here's a -list of what each version provided: - - 0.0: This prototype implemented resize and rotation in the - TinyX server Used approximately the protocol described in - the Usenix paper. Appeared in the TinyX server in - XFree86 4.2, but not in the XFree86 main server. - - 0.1: Added subpixel order, added an event for subpixel order. - This version was never checked in to XFree86 CVS. - - 1.0: Implements resize, rotation, and reflection. Implemented - both in the XFree86 main server (size change only at this - date), and fully (size change, rotation, and reflection) - in XFree86's TinyX server. - - 1.1: Added refresh rates - - 1.2: Separate screens from CRTCs and outputs, switch to full VESA - modes - - 1.3: Added cheap version of RRGetScreenResources. Added CRTC - transformations. Added panning. Added primary outputs. - Added standard properties. - -Compatibility between 0.0 and 1.0 was *NOT* preserved, and 0.0 clients -will fail against 1.0 servers. The wire encoding op-codes were -changed for GetScreenInfo to ensure this failure in a relatively -graceful way. Version 1.1 servers and clients are cross compatible with -1.0. Version 1.1 is considered to be stable and we intend upward -compatibility from this point. Version 1.2 offers an extended model of the -system with multiple output support. Version 1.3 adds a cheap version of -GetScreenResources to avoid expensive DDC operations, CRTC transformations, -panning, and the primary output concept. 1.2 and 1.3 are backward-compatible -with 1.1. - - ❧❧❧❧❧❧❧❧❧❧❧ - -11. Relationship with other extensions - -Two other extensions have a direct relationship with this extension. This -section attempts to explain how these three are supposed to work together. - -11.1 XFree86-VidModeExtension - -XFree86-VidModeExtension changes the configuration of a single monitor -attached to the screen without changing the configuration of the screen -itself. It provides the ability to specify new mode lines for the server to -use along with selecting among existing mode lines. As it uses screen -numbers instead of window identifiers, it can be used to affect multiple -monitors in a single-screen Xinerama configuration. However, the association -between screen numbers and root windows in a multi-Screen environment is not -defined by the extension. Version 2.0 of this extension added the ability to -adjust the DAC values in a TrueColor server to modify the brightness curves -of the display. - -All of the utility of this extension is subsumed by RandR version 1.2, RandR -should be used in preference to XFree86-VidModeExtension where both are -present. - -11.2 Xinerama - -Xinerama provides a mechanism for describing the relationship between the -overall screen display and monitors placed within that area. As such, it -provides the query functionality of RandR 1.2 without any of the -configuration functionality. Applications using Xinerama to discover -monitor geometry can continue to do so, with the caveat that they will not be -informed of changes when they occur. However, Xinerama configuration data -will be updated, so applications selecting for RandR notification and -re-querying the configuration with the Xinerama extension will get updated -information. It is probably better to view RandR as a superset of Xinerama -at this point and use it in preference to Xinerama where both are present. - - ❧❧❧❧❧❧❧❧❧❧❧ - -Appendix A. Protocol Encoding - -Syntactic Conventions - -This document uses the same syntactic conventions as the core X -protocol encoding document. - -A.1 Common Types - -┌─── - ROTATION - 0x0001 Rotate_0 - 0x0002 Rotate_90 - 0x0004 Rotate_180 - 0x0008 Rotate_270 - 0x0010 Reflect_X - 0x0020 Reflect_Y -└─── - Used to encode both sets of possible rotations and individual - selected rotations. - -┌─── - RRSELECTMASK - 0x0001 ScreenChangeNotifyMask - 0x0002 CrtcChangeNotifyMask Added in version 1.2 - 0x0004 OutputChangeNotifyMask Added in version 1.2 - 0x0008 OutputPropertyNotifyMask Added in version 1.2 -└─── - Event select mask for RRSelectInput - -┌─── - RRCONFIGSTATUS - 0x0 Success - 0x1 InvalidConfigTime - 0x2 InvalidTime - 0x3 Failed -└─── - Return status for requests which depend on time. - -┌─── - MODEINFO (32) Added in version 1.2 - 4 CARD32 id - 2 CARD16 width in pixels - 2 CARD16 height in pixels - 4 CARD32 dot clock - 2 CARD16 h sync start - 2 CARD16 h sync end - 2 CARD16 h total - 2 CARD16 h skew - 2 CARD16 v sync start - 2 CARD16 v sync end - 2 CARD16 v total - 2 CARD16 name length - 4 SETofMODEFLAG mode flags -└─── - - An output mode specifies the complete CRTC timings for - a specific mode. The vertical and horizontal synchronization rates - can be computed given the dot clock and the h total/v total - values. If the dot clock is zero, then all of the timing - parameters and flags are not used, and must be zero as this - indicates that the timings are unknown or otherwise unused. - The name itself will be encoded separately in each usage. - -┌─── - MODEFLAG - 0x00000001 HSyncPositive - 0x00000002 HSyncNegative - 0x00000004 VSyncPositive - 0x00000008 VSyncNegative - 0x00000010 Interlace - 0x00000020 DoubleScan - 0x00000040 CSync - 0x00000080 CSyncPositive - 0x00000100 CSyncNegative - 0x00000200 HSkewPresent - 0x00000400 BCast - 0x00000800 PixelMultiplex - 0x00001000 DoubleClock - 0x00002000 ClockDivideBy2 -└─── -┌─── - CONNECTION - 0 Connected - 1 Disconnected - 2 UnknownConnection -└─── - - -A.2 Protocol Requests - -Opcodes 1 and 3 were used in the 0.0 protocols, and will return -errors if used in version 1.0. - -┌─── - RRQueryVersion - - 1 CARD8 major opcode - 1 0 RandR opcode - 2 3 length - 4 CARD32 major version - 4 CARD32 minor version - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 0 reply length - 1 CARD32 major version - 1 CARD32 minor version -└─── -┌─── - RRSetScreenConfig - - 1 CARD8 major opcode - 1 2 RandR opcode - 2 6 length - 4 WINDOW window on screen to be configured - 4 TIMESTAMP timestamp - 4 TIMESTAMP config timestamp - 2 SIZEID size index - 2 ROTATION rotation/reflection - 2 CARD16 refresh rate (1.1 only) - 2 CARD16 pad - ▶ - 1 1 Reply - 1 RRCONFIGSTATUS status - 2 CARD16 sequence number - 4 0 reply length - 4 TIMESTAMP new timestamp - 4 TIMESTAMP new configuration timestamp - 4 WINDOW root - 2 SUBPIXELORDER subpixel order defined in Render - 2 CARD16 pad4 - 4 CARD32 pad5 - 4 CARD32 pad6 -└─── -┌─── - RRSelectInput - - 1 CARD8 major opcode - 1 4 RandR opcode - 2 3 length - 4 WINDOW window - 2 SETofRRSELECTMASK enable - 2 CARD16 pad -└─── -┌─── - RRGetScreenInfo - - 1 CARD8 major opcode - 1 5 RandR opcode - 2 2 length - 4 WINDOW window - ▶ - 1 1 Reply - 1 CARD8 set of Rotations - 2 CARD16 sequence number - 4 0 reply length - 4 WINDOW root window - 4 TIMESTAMP timestamp - 4 TIMESTAMP config timestamp - 2 CARD16 number of SCREENSIZE following - 2 SIZEID current size index - 2 ROTATION current rotation and reflection - 2 CARD16 current rate (added in version 1.1) - 2 CARD16 length of rate info (number of CARD16s) - 2 CARD16 pad - - SCREENSIZE - 2 CARD16 width in pixels - 2 CARD16 height in pixels - 2 CARD16 width in millimeters - 2 CARD16 height in millimeters - - REFRESH - 2 CARD16 number of rates (n) - 2n CARD16 rates -└─── - -A.2.1 Protocol Requests added with version 1.2 - -┌─── - RRGetScreenSizeRange - 1 CARD8 major opcode - 1 6 RandR opcode - 2 2 length - 4 WINDOW window - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 0 reply length - 2 CARD16 minWidth - 2 CARD16 minHeight - 2 CARD16 maxWidth - 2 CARD16 maxHeight - 16 unused -└─── -┌─── - RRSetScreenSize - 1 CARD8 major opcode - 1 7 RandR opcode - 2 5 length - 4 WINDOW window - 2 CARD16 width - 2 CARD16 height - 4 CARD32 width in millimeters - 4 CARD32 height in millimeters -└─── -┌─── - RRGetScreenResources - 1 CARD8 major opcode - 1 8 RandR opcode - 2 2 length - 4 WINDOW window - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 c+o+8m+(b+p)/4 reply length - 4 TIMESTAMP timestamp - 4 TIMESTAMP config-timestamp - 2 c number of CRTCs - 2 o number of outputs - 2 m number of modeinfos - 2 b total bytes in mode names - 8 unused - 4c LISTofCRTC crtcs - 4o LISTofOUTPUT outputs - 32m LISTofMODEINFO modeinfos - b STRING8 mode names - p unused, p=pad(b) -└─── -┌─── - RRGetOutputInfo - 1 CARD8 major opcode - 1 9 RandR opcode - 2 3 length - 4 OUTPUT output - 4 TIMESTAMP config-timestamp - ▶ - 1 1 Reply - 1 RRCONFIGSTATUS status - 2 CARD16 sequence number - 4 1+c+m+(n+p)/4 reply length - 4 TIMESTAMP timestamp - 4 CRTC current connected crtc - 4 CARD32 width in millimeters - 4 CARD32 height in millimeters - 1 CONNECTION connection - 1 SUBPIXELORDER subpixel-order - 2 c number of CRTCs - 2 m number of modes - 2 p number of preferred modes - 2 o number of clones - 2 n length of name - 4c LISTofCRTC crtcs - 4m LISTofMODE modes - 4o LISTofOUTPUT clones - n STRING8 name - p unused, p=pad(n) -└─── -┌─── - RRListOutputProperties - 1 CARD8 major opcode - 1 10 RandR opcode - 2 2 length - 4 OUTPUT output - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 n reply length - 2 n number of ATOMs in atoms - 22 unused - 4n LISTofATOM atoms -└─── -┌─── - RRQueryOutputProperty - 1 CARD8 major opcode - 1 11 RandR opcode - 2 3 request length - 4 OUTPUT output - 4 ATOM property - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 n reply length - 1 BOOL pending - 1 BOOL range - 1 BOOL immutable - 21 unused - 4n LISTofINT32 valid values -└─── -┌─── - RRConfigureOutputProperty - 1 CARD8 major opcode - 1 12 RandR opcode - 2 4+n request length - 4 OUTPUT output - 4 ATOM property - 1 BOOL pending - 1 BOOL range - 2 unused - 4n LISTofINT32 valid values -└─── -┌─── - RRChangeOutputProperty - 1 CARD8 major opcode - 1 13 RandR opcode - 2 6+(n+p)/4 request length - 4 OUTPUT output - 4 ATOM property - 4 ATOM type - 1 CARD8 format - 1 mode - 0 Replace - 1 Prepend - 2 Append - 2 unused - 4 CARD32 length of data in format units - (= n for format = 8) - (= n/2 for format = 16) - (= n/4 for format = 32) - n LISTofBYTE data - (n is a multiple of 2 for format = 16) - (n is a multiple of 4 for format = 32) - p unused, p=pad(n) -└─── -┌─── - RRDeleteOutputProperty - 1 CARD8 major opcode - 1 14 RandR opcode - 2 3 request length - 4 OUTPUT output - 4 ATOM property -└─── -┌─── - RRGetOutputProperty - 1 CARD8 major opcode - 1 15 RandR opcode - 2 7 request length - 4 OUTPUT output - 4 ATOM property - 4 ATOM type - 0 AnyPropertyType - 4 CARD32 long-offset - 4 CARD32 long-length - 1 BOOL delete - 1 BOOL pending - 2 unused - ▶ - 1 1 Reply - 1 CARD8 format - 2 CARD16 sequence number - 4 (n+p)/4 reply length - 4 ATOM type - 0 None - 4 CARD32 bytes-after - 4 CARD32 length of value in format units - (= 0 for format = 0) - (= n for format = 8) - (= n/2 for format = 16) - (= n/4 for format = 32) - 12 unused - n LISTofBYTE value - (n is zero for format = 0) - (n is a multiple of 2 for format = 16) - (n is a multiple of 4 for format = 32) - p unused, p=pad(n) -└─── -┌─── - RRCreateMode - 1 CARD8 major opcode - 1 16 RandR opcode - 2 12+(n+p)/4 length - 4 WINDOW window - 32 MODEINFO mode - n STRING8 mode name - p unused, p=pad(n) - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 0 reply length - 4 MODE mode - 20 unused -└─── -┌─── - RRDestroyMode - 1 CARD8 major opcode - 1 17 RandR opcode - 2 2 length - 4 MODE mode -└─── -┌─── - RRAddOutputMode - 1 CARD8 major opcode - 1 18 RandR opcode - 2 3 length - 4 OUTPUT output - 4 MODE mode -└─── -┌─── - RRDeleteOutputMode - 1 CARD8 major opcode - 1 19 RandR opcode - 2 3 length - 4 OUTPUT output - 4 MODE mode -└─── -┌─── - RRGetCrtcInfo - 1 CARD8 major opcode - 1 20 RandR opcode - 2 3 length - 4 CRTC crtc - 4 TIMESTAMP config-timestamp - ▶ - 1 1 Reply - 1 RRCONFIGSTATUS status - 2 CARD16 sequence number - 4 o+p reply length - 4 TIMESTATMP timestamp - 2 INT16 x - 2 INT16 y - 2 CARD16 width - 2 CARD16 height - 4 MODE mode - 2 ROTATION current rotation and reflection - 2 ROTATION set of possible rotations - 2 o number of outputs - 2 p number of possible outputs - 4o LISTofOUTPUT outputs - 4p LISTofOUTPUT possible outputs -└─── -┌─── - RRSetCrtcConfig - 1 CARD8 major opcode - 1 21 RandR opcode - 2 7+2n length - 4 CRTC crtc - 4 TIMESTAMP timestamp - 4 TIMESTAMP config timestamp - 2 INT16 x - 2 INT16 y - 4 MODE mode - 2 ROTATION rotation/reflection - 2 unused - 8n LISTofOUTPUT outputs - ▶ - 1 1 Reply - 1 RRCONFIGSTATUS status - 2 CARD16 sequence number - 4 0 reply length - 4 TIMESTAMP new timestamp - 20 unused -└─── -┌─── - RRGetCrtcGammaSize - 1 CARD8 major opcode - 1 22 RandR opcode - 2 2 length - 4 CRTC crtc - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 0 reply length - 2 CARD16 size - 22 unused -└─── -┌─── - RRGetCrtcGamma - 1 CARD8 major opcode - 1 23 RandR opcode - 2 2 length - 4 CRTC crtc - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 (6n+2)/4 reply length - 2 n size - 20 unused - 2n LISTofCARD16 red - 2n LISTofCARD16 green - 2n LISTofCARD16 blue - p unused, p=pad(6n) -└─── -┌─── - RRSetCrtcGamma - 1 CARD8 major opcode - 1 24 RandR opcode - 2 3+(6n+2)/4 length - 4 CRTC crtc - 2 n size - 2 unused - 2n LISTofCARD16 red - 2n LISTofCARD16 green - 2n LISTofCARD16 blue - p unused, p=pad(6n) -└─── - -A.2.2 Protocol Requests added with version 1.3 - -┌─── - RRGetScreenResourcesCurrent - 1 CARD8 major opcode - 1 25 RandR opcode - 2 2 length - 4 WINDOW window - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 c+o+8m+(b+p)/4 reply length - 4 TIMESTAMP timestamp - 4 TIMESTAMP config-timestamp - 2 c number of CRTCs - 2 o number of outputs - 2 m number of modeinfos - 2 b total bytes in mode names - 8 unused - 4c LISTofCRTC crtcs - 4o LISTofOUTPUT outputs - 32m LISTofMODEINFO modeinfos - b STRING8 mode names - p unused, p=pad(b) -└─── - -┌─── - RRSetCrtcTransform - 1 CARD8 major opcode - 1 26 RandR opcode - 2 12+(n+p)/4+v length - 4 CRTC crtc - 36 TRANSFORM transform - 2 CARD16 filter length - 2 unused - n STRING8 filter name - p unused, p=pad(n) - 4v FIXED filter params -└─── - -┌─── - RRGetCrtcTransform - 1 CARD8 major opcode - 1 27 RandR opcode - 2 2 length - 4 CRTC crtc - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 16+(pn+pnp)/4+(cn+cnp)/4+pf+cf reply length - 36 TRANSFORM pending transform - 1 BOOL has transforms - 3 unused - 36 TRANSFORM current transform - 4 unused - 2 pn pending filter name length - 2 pf pending filter num params - 2 cn current filter name length - 2 cf current filter num params - pn STRING8 pending filter name - pnp unused, pnp=pad(pn) - 4*pf FIXED pending filter params - cn STRING8 current filter name - cnp unused, cnp=pad(cn) - 4*cf FIXED current filter params -└─── - -┌─── - RRGetPanning - 1 CARD8 major opcode - 1 28 RandR opcode - 2 2 length - 4 CRTC crtc - ▶ - 1 1 Reply - 1 RRCONFIGSTATUS status - 2 CARD16 sequence number - 4 1 reply length - 4 TIMESTAMP timestamp - 2 CARD16 left - 2 CARD16 top - 2 CARD16 width - 2 CARD16 height - 2 CARD16 track_left - 2 CARD16 track_top - 2 CARD16 track_width - 2 CARD16 track_height - 2 INT16 border_left - 2 INT16 border_top - 2 INT16 border_right - 2 INT16 border_bottom -└─── -┌─── - RRSetPanning - 1 CARD8 major opcode - 1 29 RandR opcode - 2 9 length - 4 CRTC crtc - 4 TIMESTAMP timestamp - 2 CARD16 left - 2 CARD16 top - 2 CARD16 width - 2 CARD16 height - 2 CARD16 track_left - 2 CARD16 track_top - 2 CARD16 track_width - 2 CARD16 track_height - 2 INT16 border_left - 2 INT16 border_top - 2 INT16 border_right - 2 INT16 border_bottom - ▶ - 1 1 Reply - 1 RRCONFIGSTATUS status - 2 CARD16 sequence number - 4 0 reply length - 4 TIMESTAMP new timestamp - 20 unused -└─── - -┌─── - RRSetOutputPrimary - 1 CARD8 major opcode - 1 30 RandR opcode - 2 3 length - 4 WINDOW window - 4 OUTPUT output -└─── - -┌─── - RRGetOutputPrimary - 1 CARD8 major opcode - 1 31 RandR opcode - 2 2 length - 4 WINDOW window - ▶ - 1 1 Reply - 1 unused - 2 CARD16 sequence number - 4 CARD32 length - 4 OUTPUT output - 4 CARD32 pad1 - 4 CARD32 pad2 - 4 CARD32 pad3 - 4 CARD32 pad4 -└─── - -A.3 Protocol Events - -┌─── - RRScreenChangeNotify - 1 Base + 0 code - 1 ROTATION new rotation and reflection - 2 CARD16 sequence number - 4 TIMESTAMP timestamp - 4 TIMESTAMP configuration timestamp - 4 WINDOW root window - 4 WINDOW request window - 2 SIZEID size ID - 2 SUBPIXELORDER subpixel order defined in Render - 2 CARD16 width in pixels - 2 CARD16 height in pixels - 2 CARD16 width in millimeters - 2 CARD16 height in millimeters -└─── - -A.3.1 Protocol Events added with version 1.2 - -┌─── - RRCrtcChangeNotify - 1 Base + 1 code - 1 0 sub-code - 2 CARD16 sequence number - 4 TIMESTAMP timestamp - 4 WINDOW request window - 4 CRTC crtc affected - 4 MODE mode in use - 2 ROTATION new rotation and reflection - 2 unused - 2 INT16 x - 2 INT16 y - 2 CARD16 width - 2 CARD16 height -└─── -┌─── - RROutputChangeNotify - 1 Base + 1 code - 1 1 sub-code - 2 CARD16 sequence number - 4 TIMESTAMP timestamp - 4 TIMESTAMP configuration timestamp - 4 WINDOW request window - 4 OUTPUT output affected - 4 CRTC crtc in use - 4 MODE mode in use - 2 ROTATION rotation in use - 1 CONNECTION connection status - 1 SUBPIXELORDER subpixel order -└─── -┌─── - RROutputPropertyNotify - 1 Base + 1 code - 1 2 sub-code - 2 CARD16 sequence number - 4 WINDOW window - 4 OUTPUT output - 4 ATOM atom - 4 TIMESTAMP time - 1 state - 0 NewValue - 1 Deleted - 11 unused -└─── - -A.4 Protocol Errors - -┌─── - ERRORS - Base + 0 Output - Base + 1 Crtc - Base + 2 Mode -└─── - -Bibliography - -[RANDR] Gettys, Jim and Keith Packard, "The X Resize and Rotate - Extension - RandR", Proceedings of the 2001 USENIX Annual - Technical Conference, Boston, MA - -[RENDER] - Packard, Keith, "The X Rendering Extension", work in progress, - http://cgit.freedesktop.org/xorg/proto/renderproto/tree/renderproto.txt + The X Resize, Rotate and Reflect Extension + Version 1.4.0 + 2009-10-5 + + Jim Gettys + Jim.Gettys@hp.com + Cambridge Research Laboratory + HP Labs + Hewlett Packard Company + + Keith Packard + keith.packard@intel.com + Open Source Technology Center + Intel Corporation + +1. Introduction + +The X Resize, Rotate and Reflect Extension, called RandR for short, +brings the ability to resize, rotate and reflect the root window of a +screen. It is based on the X Resize and Rotate Extension as specified +in the Proceedings of the 2001 Usenix Technical Conference [RANDR]. + +RandR as implemented and integrated into the X server differs in +one substantial fashion from the design discussed in that paper: that +is, RandR 1.0 does not implement the depth switching described in that +document, and the support described for that in the protocol in that +document and in the implementation has been removed from the +protocol described here, as it has been overtaken by events. + +These events include: + ► Modern toolkits (in this case, GTK+ 2.x) have progressed to the point + of implementing migration between screens of arbitrary depths + ► The continued advance of Moore's law has made limited amounts of VRAM + less of an issue, reducing the pressure to implement depth switching + on laptops or desktop systems + ► The continued decline of legacy toolkits whose design would have + required depth switching to support migration + ► The lack of depth switching implementation experience in the + intervening time, due to events beyond our control + +Additionally, the requirement to support depth switching might +complicate other re-engineering of the device independent part of the +X server that is currently being contemplated. + +Rather than further delaying RandR's widespread deployment for a feature +long wanted by the community (resizing of screens, particularly on laptops), +or the deployment of a protocol design that might be flawed due to lack of +implementation experience, we decided to remove depth switching from the +protocol. It may be implemented at a later time if resources and +interests permit as a revision to the protocol described here, which will +remain a stable base for applications. The protocol described here has been +implemented in the main X.org server, and more fully in the hw/kdrive +implementation in the distribution, which fully implements resizing, +rotation and reflection. + +1.2 Introduction to version 1.2 of the extension + +One of the significant limitations found in version 1.1 of the RandR +protocol was the inability to deal with the Xinerama model where multiple +monitors display portions of a common underlying screen. In this environment, +zero or more video outputs are associated with each CRT controller which +defines both a set of video timings and a 'viewport' within the larger +screen. This viewport is independent of the overall size of the screen, and +may be located anywhere within the screen. + +The effect is to decouple the reported size of the screen from the size +presented by each video output, and to permit multiple outputs to present +information for a single screen. + +To extend RandR for this model, we separate out the output, CRTC and screen +configuration information and permit them to be configured separately. For +compatibility with the 1.1 version of the protocol, we make the 1.1 requests +simultaneously affect both the screen and the (presumably sole) CRTC and +output. The set of available outputs are presented with UTF-8 encoded names +and may be connected to CRTCs as permitted by the underlying hardware. CRTC +configuration is now done with full mode information instead of just size +and refresh rate, and these modes have names. These names also use UTF-8 +encoding. New modes may also be added by the user. + +Additional requests and events are provided for this new functionality. + + ┌────────────────────────────────┬──────────┐ + ┏━━━━━━━┳───────────────┐ ╔════════╗ ╔════════╗ + ┃ 1 ┃ │ ║ A ║ ║ B ║ + ┃ ┏━━━╋━━━━━━━━━━━━━━━┫ ║ ║ ║ ║ + ┣━━━╋━━━┛ ┃ ╚════════╝ ╚════════╝ + │ ┃ 2 ┃─────────────────┐ + │ ┃ ┃ ╔═══════════════════╗ + │ ┃ ┃ ║ ║ + │ ┗━━━━━━━━━━━━━━━━━━━┫ ║ C ║ + └───────────────────────┘ ║ ║ + ┌──────┐ ┏━━━━┓ ╔══════╗ ║ ║ + │screen│ ┃CRTC┃ ║output║ ╚═══════════════════╝ + └──────┘ ┗━━━━┛ ╚══════╝ + +In this picture, the screen is covered (incompletely) by two CRTCs. CRTC1 +is connected to two outputs, A and B. CRTC2 is connected to output C. +Outputs A and B will present exactly the same region of the screen using +the same mode line. Output C will present a different (larger) region of +the screen using a different mode line. + +RandR provides information about each available CRTC and output; the +connection between CRTC and output is under application control, although +the hardware will probably impose restrictions on the possible +configurations. The protocol doesn't try to describe these restrictions, +instead it provides a mechanism to find out what combinations are supported. + +For instance, dual-link DVI gangs two CRTC outputs together to provide higher +bandwidth for large resolution screens. This is exposed in RandR by +requiring that nothing be connected to the second CRTC when driving a high +resolution screen on the first. + +1.3 Introduction to version 1.3 of the extension + +Version 1.3 builds on the changes made with version 1.2 and adds some new +capabilities without fundmentally changing the extension again. The +following features are added in this version: + + • Projective Transforms. The implementation work for general rotation + support made it trivial to add full projective transformations. These + can be used to scale the screen up/down as well as perform projector + keystone correct or other effects. + + • Panning. It was removed with RandR 1.2 because the old semantics didn't + fit any longer. With RandR 1.3 panning can be specified per crtc. + +1.4 Introduction to version 1.4 of the extension + +Version 1.4 adds a couple more capabilities to further expose the +underlying hardware to clients + + • Per-crtc pixmaps. This provides for multiple scan-out buffers + which applications can create and assign to arbitrary collections + of crtcs. + + • Sprite position and image transforms. These provide a projective + transform for both the hot spot location and the sprite image + itself for each CRTC. + + • RRSetCrtcConfigs request. This supplies a set of + crtc configurations to the server that must be applied together + or not at all. This can reduce screen flicker while also + providing the server a complete configuration for appropriate + resource management. + +The first two additions, per-crtc pixmaps and sprite transforms are +designed to solve two problems: + + 1) Screen transforms. The software transform code in the X server + uses a shadow frame buffer, adding another copy to every graphics + operation. Worse, the server has no idea about when clients are + done drawing a frame, so the user gets additional latency and + judder. + + The goal is to move this operation out to the compositing manager + which already deals with an extra copy of the frame buffer for + many operations. Have the compositing manager create and draw to a + separate pixmap for scanout. It can perform whatever transforms + are required to get the image in the right orientation for the + user. + + 2) Hardware scanout engine size limits. With a single scanout buffer + for the entire screen, it's possible for the user to ask for a + configuration which requires that scanout buffer to be larger than + the hardware is capable of scanning out from. Again, having the + compositing manager create a pixmap for each CRTC will allow for + any configuration where monitor position within the virtual space + isn't limited by the scanout limits. + +In both of these cases, the Sprite transforms are necessary to ensure +that the sprite appears at the desired spot on each CRTC and with the +right shape. + +1.99 Acknowledgements + +Our thanks to the contributors to the design found on the xpert mailing +list, in particular: + +Alan Hourihane for work on the early implementation +Andrew C. Aitchison for help with the XFree86 DDX implementation +Andy Ritger for early questions about how mergefb/Xinerama work with RandR +Carl Worth for editing the specification and Usenix paper +David Dawes for XFree86 DDX integration work +Thomas Winischhofer for the hardware-accelerated SiS rotation implementation +Matthew Tippett and Kevin Martin for splitting outputs and CRTCs to more +fully expose what video hardware can do + + ❧❧❧❧❧❧❧❧❧❧❧ + +2. Screen change model + +Screens may change dynamically, either under control of this extension, or +due to external events. Examples include: monitors being swapped, pressing a +button to switch from internal display to an external monitor on a laptop, +or, eventually, the hotplug of a display card entirely on busses such as +Cardbus or Express Card which permit hot-swap (which will require other work +in addition to this extension). + +Since the screen configuration is dynamic and asynchronous to the client and +may change at any time RandR provides mechanisms to ensure that your clients +view is up to date with the configuration possibilities of the moment and +enforces applications that wish to control the configuration to prove that +their information is up to date before honoring requests to change the +screen configuration (by requiring a timestamp on the request). + +Interested applications are notified whenever the screen configuration +changes, providing the current size of the screen and subpixel order (see +the Render extension [RENDER]), to enable proper rendering of subpixel +decimated client text to continue, along with a time stamp of the +configuration change. A client must refresh its knowledge of the screen +configuration before attempting to change the configuration after a +notification, or the request will fail. + +To avoid multiplicative explosion between orientation, reflection and sizes, +the sizes are only those sizes in the normal (0) rotation. + +Rotation and reflection and how they interact can be confusing. In Randr, +the coordinate system is rotated in a counter-clockwise direction relative +to the normal orientation. Reflection is along the window system coordinate +system, not the physical screen X and Y axis, so that rotation and +reflection do not interact. The other way to consider reflection is to is +specified in the "normal" orientation, before rotation, if you find the +other way confusing. + +We expect that most clients and toolkits will be oblivious to changes to the +screen structure, as they generally use the values in the connections Display +structure directly. By toolkits updating the values on the fly, we believe +pop-up menus and other pop up windows will position themselves correctly in +the face of screen configuration changes (the issue is ensuring that pop-ups +are visible on the reconfigured screen). + + ❧❧❧❧❧❧❧❧❧❧❧ + +3. Data Types + +The subpixel order is shared with the Render extension, and is documented +there. The only datatype defined is the screen size, defined in the normal +(0 degree) orientation. + + ❧❧❧❧❧❧❧❧❧❧❧ + +4. Errors + +Errors are sent using core X error reports. + +Output + A value for an OUTPUT argument does not name a defined OUTPUT. +CRTC + A value for a CRTC argument does not name a defined CRTC. +Mode + A value for a MODE argument does not name a defined MODE. + + ❧❧❧❧❧❧❧❧❧❧❧ + +5. Protocol Types + +RRCONFIGSTATUS { Success + InvalidConfigTime + InvalidTime + Failed } + + A value of type RRCONFIGSTATUS returned when manipulating the output + configuration or querying information from the server that has some + time-dependency. + + InvalidConfigTime indicates that the supplied configuration + timestamp does not match the current X server configuration + timestamp. Usually this means that the output configuration has + changed since the timestamp was received by the application. + + InvalidTime indicates that the supplied output reconfiguration time + is earlier than the most recent output reconfiguration request. + Generally this indicates that another application has reconfigured + the output using a later timestamp. + + Failed is returned whenever the operation is unsuccessful for some + other reason. This generally indicates that the requested output + configuration is unsupported by the hardware. The goal is to make + these limitations expressed by the protocol, but when that isn't + possible it is correct to return this error value. If, as a + implentor, you find this error code required, please submit the + hardware constraints that exist so that a future version of the + extension can correctly capture the configuration constraints in + your system. + +ROTATION { Rotate_0 + Rotate_90 + Rotate_180 + Rotate_270 + Reflect_X + Reflect_Y } + + These values are used both to indicate a set of allowed rotations + and reflections as well as to indicate a specific rotation and + reflection combination. + +RRSELECTMASK { RRScreenChangeNotifyMask + RRCrtcChangeNotifyMask (New in version 1.2) + RROutputChangeNotifyMask (New in version 1.2) + RROutputPropertyNotifyMask (New in version 1.2) } + +SIZEID { CARD16 } + +MODE { XID or None } + +CRTC { XID } + +OUTPUT { XID } + +CONNECTION { Connected, Disconnected, UnknownConnection } + + This value provides an indication of whether an output is actually + connected to a monitor or other presentation device. + +SUBPIXELORDER { SubPixelUnknown The subpixel order uses the Render + SubPixelHorizontalRGB extensions definitions; they are here + SubPixelHorizontalBGR only for convenience. + SubPixelVerticalRGB + SubPixelVerticalBGR + SubPixelNone } + +SCREENSIZE { widthInPixels, heightInPixels: CARD16 + widthInMillimeters, heightInMillimeters: CARD16 } + +MODEFLAG { HSyncPositive + HSyncNegative + VSyncPositive + VSyncNegative + Interlace + DoubleScan + CSync + CSyncPositive + CSyncNegative + HSkewPresent + BCast + PixelMultiplex + DoubleClock + ClockDivideBy2 } + +MODEINFO { id: MODE + name: STRING + width, height: CARD16 + dotClock: CARD32 + hSyncStart, hSyncEnd, hTotal, hSkew: CARD16 + vSyncStart, vSyncEnd, vTotal: CARD16 + modeFlags: SETofMODEFLAG } + +REFRESH { rates: LISTofCARD16 } + + ❧❧❧❧❧❧❧❧❧❧❧ + +5.4. Protocol Types added in version 1.4 of the extension + +SCANOUTPIXMAPINFO { format: PICTFORMAT + maxWidth, maxHeight: CARD16 + rotations: SETofROTATION } + + 'format' is the format of the pixels within the scanout + pixmap. Only 'Direct' formats are supported, this will never + be an 'Indexed' format. + + 'maxWidth' and 'maxHeight' define the largest supported + scanout pixmap. There is no minimum size; scanout pixmaps down + to 1x1 may be created. + + 'rotations' lists the set of rotations which can be provided + without additional latency or memory usage within the + environment. This typically means that they are supported + directly by the hardware. It is expected that a compositing + manager will perform other transforms as a part of the + compositing process in conjunction with the sprite transforms + described in this extension. + +SCREENFLAG { SetScreenPixmapSize + SetScreenSize + SetScreenSizeInMillimeters + SetScreenCrtcs } + +CRTCFLAG { SetCrtcPosition + SetCrtcMode + SetCrtcRotation + SetCrtcOutputs + SetCrtcSpritePositionTransform + SetCrtcSpriteImageTransform + SetCrtcPixmap + SetCrtcPixmapPosition } + +CRTCCONFIG { crtc: CRTC + set: SETofCRTCFLAG + x, y: INT16 + mode: MODE + rotation: ROTATION + sprite-position-transform: TRANSFORM + sprite-image-transform: TRANSFORM + outputs: LISTofOUTPUT + pixmap: PIXMAP or None + pixmap-x, pixmap-y: INT16 } + + If 'set' includes SetCrtcSpritePositionTransform, then + sprite-position-transform is used as in the + RRSetCrtcSpriteTransform request position-transform parameter. + + If 'set' includes SetCrtcSpriteImageTransform, then + sprite-image-transform is used as in the + RRSetCrtcSpriteTransform request image-transform parameter. + + If 'set' includes SetCrtcPixmap, then 'pixmap' specifies the + origin of the pixel data to be presented on 'crtc'. If + 'pixmap' is None, then data will be presented from the screen + pixmap. + + If 'set' includes SetCrtcPixmapPosition, then 'pixmap-x' and + 'pixmap-y' specify the origin of the scanout data within the + pixmap, the area from that location to pixmap-x + + width-of(mode), pixmap-y + height-of(mode) is what will be + seen on the connected outputs. + + If 'set' includes SetCrtcPixmap, then 'pixmap' must specify a + scanout pixmap as created by RRCreateScanoutPixmap or + None. Otherwise a Match error results. Furthermore: + + * 'pixmap' must be at least as large as the area to be + scanned out, or a Match error results. + + * If 'pixmap' is destroyed while still being used as a + scanout pixmap, then the associated CRTC will have its + scanout pixmap set back to None, the CRTC origin set back + to 0,0 (to make sure it fits) and the screen pixmap width + and height increased to be at least as big as the current + CRTC mode. + + * Future crtc changes that do not change the scanout pixmap + will cause an existing scanout pixmap to be resized to be + large enough to hold the new mode at the then-current + pixmap-x/pixmap-y location. + + If 'set' includes SetCrtcRotation then: + + * Any new or existing scanout pixmap must have had the + specified 'rotation' included as a part of its creation + parameters, or a Match error results. + + * If no scanout pixmap is in use, then the crtc must support + 'rotation' else a Value error results. + + ❧❧❧❧❧❧❧❧❧❧❧ + +6. Extension Initialization + +The name of this extension is "RANDR". + +┌─── + RRQueryVersion + client-major-version: CARD32 + client-minor-version: CARD32 + ▶ + major-version: CARD32 + minor-version: CARD32 +└─── + + The client sends the highest supported version to the server + and the server sends the highest version it supports, but no + higher than the requested version. Major versions changes can + introduce incompatibilities in existing functionality, minor + version changes introduce only backward compatible changes. + It is the clients responsibility to ensure that the server + supports a version which is compatible with its expectations. + + ❧❧❧❧❧❧❧❧❧❧❧ + +7. Extension Requests + +┌─── + RRSelectInput + window: WINDOW + enable: SETofRRSELECTMASK +└─── + Errors: Window, Value + + If 'enable' is RRScreenChangeNotifyMask, RRScreenChangeNotify events + will be sent when the screen configuration changes, either from + this protocol extension, or due to detected external screen + configuration changes. RRScreenChangeNotify may also be sent when + this request executes if the screen configuration has changed since + the client connected, to avoid race conditions. + + New for version 1.2: + + If 'enable' contains RRCrtcChangeMask, RRCrtcChangeNotify events + will be sent when a the configuration for a CRTC associated with the + screen changes, either through this protocol extension or due to + detected external changes. RRCrtcChangeNotify may also be sent when + this request executes if the CRTC configuration has changed since + the client connected, to avoid race conditions. + + If 'enable' contains RROutputChangeMask, RROutputChangeNotify events + will be sent when a the configuration for an output associated with + the screen changes, either through this protocol extension or due to + detected external changes. RROutputChangeNotify may also be sent + when this request executes if the output configuration has changed + since the client connected, to avoid race conditions. + + If 'enable' contains RROutputPropertyNotifyMask, + RROutputPropertyNotify events will be sent when properties change on + this output. + +┌─── + RRSetScreenConfig + window: WINDOW + timestamp: TIMESTAMP + config-timestamp: TIMESTAMP + size-id: SIZEID + rotation: ROTATION + rate: CARD16 + ▶ + status: RRCONFIGSTATUS + new-timestamp: TIMESTAMP + config-timestamp: TIMESTAMP + root: WINDOW + subpixelOrder: SUBPIXELORDER +└─── + Errors: Value, Match + + If 'timestamp' is less than the time when the configuration was last + successfully set, the request is ignored and InvalidTime returned in + status. + + If 'config-timestamp' is not equal to when the server's screen + configurations last changed, the request is ignored and + InvalidConfigTime returned in status. This could occur if the + screen changed since you last made a RRGetScreenInfo request, + perhaps by a different piece of display hardware being installed. + Rather than allowing an incorrect call to be executed based on stale + data, the server will ignore the request. + + 'rate' contains the desired refresh rate. If it is zero, the server + selects an appropriate rate. + + This request may fail for other indeterminate reasons, in which case + 'status' will be set to Failed and no configuration change will be + made. + + This request sets the screen to the specified size, rate, rotation + and reflection. + + When this request succeeds, 'status' contains Success and the + requested changes to configuration will have been made. + + 'new-time-stamp' contains the time at which this request was + executed. + + 'config-timestamp' contains the time when the possible screen + configurations were last changed. + + 'root' contains the root window for the screen indicated by the + window. + + 'subpixelOrder' contains the resulting subpixel order of the screen + to allow correct subpixel rendering. + + Value errors are generated when 'rotation', 'rate' or 'size-id' + are invalid. + +┌─── + RRGetScreenInfo + window: WINDOW + ▶ + rotations: SETofROTATION + root: WINDOW + timestamp: TIMESTAMP + config-timestamp: TIMESTAMP + size-id: SIZEID + rotation: ROTATION + rate: CARD16 + sizes: LISTofSCREENSIZE + refresh: LISTofREFRESH +└─── + + Errors: Window + + RRGetScreenInfo returns information about the current and available + configurations for the screen associated with 'window'. + + 'rotations' contains the set of rotations and reflections supported + by the screen. + + 'root' is the root window of the screen. + + 'config-timestamp' indicates when the screen configuration + information last changed: requests to set the screen will fail + unless the timestamp indicates that the information the client + is using is up to date, to ensure clients can be well behaved + in the face of race conditions. + + 'timestamp' indicates when the configuration was last set. + + 'size-id' indicates which size is active. + + 'rate' is the current refresh rate. This is zero when the refresh + rate is unknown or on devices for which refresh is not relevant. + + 'sizes' is the list of possible frame buffer sizes (at the normal + orientation. Each size indicates both the linear physical size of + the screen and the pixel size. + + 'refresh' is the list of refresh rates for each size. Each element + of 'sizes' has a corresponding element in 'refresh'. An empty list + indicates no known rates, or a device for which refresh is not + relevant. + + The default size of the screen (the size that would become the + current size when the server resets) is the first size in the + list. + +7.1. Extension Requests added in version 1.2 of the extension + +As introduced above, version 1.2 of the extension splits the screen size +from the crtc and output configuration, permitting the subset of the screen +presented by multiple outputs to be configured. As a separate notion, the +size of the screen itself may be arbitrarily configured within a defined +range. As crtcs and outputs are added and removed from the system, the set +returned by the extension will change so that applications can detect +dynamic changes in the display environment. + +┌─── + RRGetScreenSizeRange + window: WINDOW + ▶ + CARD16 minWidth, minHeight + CARD16 maxWidth, maxHeight +└─── + Errors: Window + + Returns the range of possible screen sizes. The screen may be set to + any size within this range. + +┌─── + RRSetScreenSize + window: WINDOW + width: CARD16 + height: CARD16 + width-in-millimeters: CARD32 + height-in-millimeters: CARD32 +└─── + Errors: Window, Match, Value + + Sets the screen to the specified size. 'width' and 'height' must be + within the range allowed by GetScreenSizeRanges, otherwise a Value + error results. All active monitors must be configured to display a + subset of the specified size, else a Match error results. + + 'width-in-millimeters' and 'height-in-millimeters' can be set to + reflect the physical size of the screen reported both through this + extension and the core protocol. They must be non-zero, or Value + error results. + + If panning is enabled, the width and height of the panning and the + tracking areas are adapted to the new size and clamped afterwards. + Disabled panning axes remain disabled. + Panning borders are disabled if their requirements are no longer met + (see RRSetPanning). + +┌─── + RRGetScreenResources + window: WINDOW + ▶ + timestamp: TIMESTAMP + config-timestamp: TIMESTAMP + crtcs: LISTofCRTC + outputs: LISTofOUTPUT + modes: LISTofMODEINFO +└─── + Errors: Window + + RRGetScreenResources returns the list of outputs and crtcs connected + to the screen associated with 'window'. + + 'timestamp' indicates when the configuration was last set. + + 'config-timestamp' indicates when the configuration information last + changed. Requests to configure the output will fail unless the + timestamp indicates that the information the client is using is up + to date, to ensure clients can be well behaved in the face of race + conditions. + + 'crtcs' contains the list of CRTCs associated with the screen. + + 'outputs' contains the list of outputs associated with the screen. + + 'modes' contains the list of modes associated with the screen + + This request explicitly asks the server to ensure that the + configuration data is up-to-date wrt the hardware. If that requires + polling, this is when such polling would take place. If the + current configuration is all that's required, use + RRGetScreenResourcesCurrent instead. + +┌─── + RRGetOutputInfo + output: OUTPUT + config-timestamp: TIMESTAMP + ▶ + status: RRCONFIGSTATUS + timestamp: TIMESTAMP + crtc: CRTC + + name: STRING + connection: CONNECTION + subpixel-order: SUBPIXELORDER + widthInMillimeters, heightInMillimeters: CARD32 + crtcs: LISTofCRTC + clones: LISTofOUTPUT + modes: LISTofMODE + num-preferred: CARD16 +└─── + Errors: Output + + RRGetOutputInfo returns information about the current and available + configurations 'output'. + + If 'config-timestamp' does not match the current configuration + timestamp (as returned by RRGetScreenResources), 'status' is set to + InvalidConfigTime and the remaining reply data is empty. Otherwise, + 'status' is set to Success. + + 'timestamp' indicates when the configuration was last set. + + 'crtc' is the current source CRTC for video data, or Disabled if the + output is not connected to any CRTC. + + 'name' is a UTF-8 encoded string designed to be presented to the + user to indicate which output this is. E.g. "S-Video" or "DVI". + + 'connection' indicates whether the hardware was able to detect a + device connected to this output. If the hardware cannot determine + whether something is connected, it will set this to + UnknownConnection. + + 'subpixel-order' contains the resulting subpixel order of the + connected device to allow correct subpixel rendering. + + 'widthInMillimeters' and 'heightInMillimeters' report the physical + size of the displayed area. If unknown, or not really fixed (e.g., + for a projector), these values are both zero. + + 'crtcs' is the list of CRTCs that this output may be connected to. + Attempting to connect this output to a different CRTC results in a + Match error. + + 'clones' is the list of outputs which may be simultaneously + connected to the same CRTC along with this output. Attempting to + connect this output with an output not in the 'clones' list + results in a Match error. + + 'modes' is the list of modes supported by this output. Attempting to + connect this output to a CRTC not using one of these modes results + in a Match error. + + The first 'num-preferred' modes in 'modes' are preferred by the + monitor in some way; for fixed-pixel devices, this would generally + indicate which modes match the resolution of the output device. + +┌─── + RRListOutputProperties + output:OUTPUT + ▶ + atoms: LISTof ATOM +└─── + Errors: Output + + This request returns the atoms of properties currently defined on + the output. + +┌─── + RRQueryOutputProperty + output: OUTPUT + property: ATOM + ▶ + pending: BOOL + range: BOOL + immutable: BOOL + valid-values: LISTofINT32 +└─── + Errors: Name, Atom, Output + + If the specified property does not exist for the specified output, + then a Name error is returned. + + If 'pending' is TRUE, changes made to property values with + RRChangeOutputProperty will be saved in the pending property value + and be automatically copied to the current value on the next + RRSetCrtcConfig request involving the named output. If 'pending' is + FALSE, changes are copied immediately. + + If 'range' is TRUE, then the valid-values list will contain + precisely two values indicating the minimum and maximum allowed + values. If 'range' is FALSE, then the valid-values list will contain + the list of possible values; attempts to set other values will + result in a Value error. + + If 'immutable' is TRUE, then the property configuration cannot be + changed by clients. Immutable properties are interpreted by the X + server. + +┌─── + RRConfigureOutputProperty + output: OUTPUT + property: ATOM + pending: BOOL + range: BOOL + valid-values: LISTofINT32 +└─── + Errors: Access, Name, Atom, Output + + If the specified property is 'immutable', an Access error is + returned. + + Otherwise, the configuration of the specified property is changed to + the values provided in this request. + + If the specified property does not exist for the specified output, + it is created with an empty value and None type. + +┌─── + RRChangeOutputProperty + output: OUTPUT + property, type: ATOM + format: {8, 16, 32} + mode: { Replace, Prepend, Append } + data: LISTofINT8 or LISTofINT16 or LISTofINT32 +└─── + Errors: Alloc, Atom, Match, Value, Output + + This request alters the value of the property for the specified + output. If the property is marked as a 'pending' property, only the + pending value of the property is changed. Otherwise, changes are + reflected in both the pending and current values of the property. + The type is uninterpreted by the server. The format specifies + whether the data should be viewed as a list of 8-bit, 16-bit, or + 32-bit quantities so that the server can correctly byte-swap as + necessary. + + If the mode is Replace, the previous property value is discarded. + If the mode is Prepend or Append, then the type and format must + match the existing property value (or a Match error results). If + the property is undefined, it is treated as defined with the correct + type and format with zero-length data. + + For Prepend, the data is tacked on to the beginning of the existing + data, and for Append, it is tacked on to the end of the existing data. + + This request generates a OutputPropertyNotify + + The lifetime of a property is not tied to the storing client. + Properties remain until explicitly deleted, until the output is + destroyed, or until server reset (see section 10). + + The maximum size of a property is server-dependent and may vary + dynamically. + +┌─── + RRDeleteOutputProperty + output: OUTPUT + property: ATOM +└─── + Errors: Atom, Output + + This request deletes the property from the specified window if the + property exists and generates a OutputPropertyNotify event unless + the property does not exist. + +┌─── + RRGetOutputProperty + output: OUTPUT + property: ATOM + type: ATOM or AnyPropertyType + long-offset, long-length: CARD32 + delete: BOOL + pending: BOOL + ▶ + type: ATOM or None + format: {0, 8, 16, 32} + bytes-after: CARD32 + value: LISTofINT8 or LISTofINT16 or LISTofINT32 +└─── + Errors: Atom, Value, Output + + If the specified property does not exist for the specified output, + then the return type is None, the format and bytes-after are zero, + and the value is empty. The delete argument is ignored in this + case. + + If the specified property exists but its type does not match the + specified type, then the return type is the actual type of the + property, the format is the actual format of the property (never + zero), the bytes-after is the length of the property in bytes (even + if the format is 16 or 32), and the value is empty. The delete + argument is ignored in this case. + + If the specified property exists and either AnyPropertyType is + specified or the specified type matches the actual type of the + property, then the return type is the actual type of the property, + the format is the actual format of the property (never zero), and + the bytes-after and value are as follows, given: + + N = actual length of the stored property in bytes + (even if the format is 16 or 32) + I = 4 × offset + T = N - I + L = MINIMUM(T, 4 × long-length) + A = N - (I + L) + + If 'pending' is true, and if the property holds a pending value, + then the value returned will be the pending value of the property + rather than the current value. The returned value starts at byte + index I in the property (indexing from 0), and its length in bytes + is L. However, it is a Value error if long-offset is given such + that L is negative. The value of bytes-after is A, giving the + number of trailing unread bytes in the stored property. If delete + is True and the bytes-after is zero, the property is also deleted + from the output, and a RROutputPropertyNotify event is generated. + +┌─── + RRCreateMode + window: WINDOW + modeinfo: MODEINFO + ▶ + mode: MODE +└─── + Errors: Window, Name, Value + + 'modeinfo' provides a new mode for outputs on the screen + associated with 'window'. If the name of 'modeinfo' names an + existing mode, a Name error is returned. If some parameter of the + mode is not valid in some other way, a Value error is returned. + + The returned 'mode' provides the id for the mode. + +┌─── + RRDestroyMode + mode: MODE +└─── + Errors: Mode, Access + + The user-defined 'mode' is destroyed. 'mode' must name a mode + defined with RRCreateMode, else an Match error is returned. If + 'mode' is in use by some CRTC or Output, then an Access error is + returned. + +┌─── + RRAddOutputMode + output: OUTPUT + mode: MODE +└─── + Errors: Output, Mode, Match + + 'output' indicates which output is to be configured. + + 'mode' specifies which mode to add. If 'mode' is not valid for + 'output', then a Match error is generated. + + This request generates OutputChangeNotify events. + +┌─── + RRDeleteOutputMode + output: OUTPUT + mode: MODE +└─── + Errors: Output, Mode + + 'output' indicates which output is to be configured. + + 'mode' specifies which mode to delete. 'mode' must have been added + with RRAddOutputMode, else an Access error is returned. 'mode' must + not be active, else a Match error is returned. + + This request generates OutputChangeNotify events. + +┌─── + RRGetCrtcInfo + crtc: CRTC + config-timestamp: TIMESTAMP + ▶ + status: RRCONFIGSTATUS + timestamp: TIMESTAMP + x, y: INT16 + width, height: CARD16 + mode: MODE + rotation: ROTATION + outputs: LISTofOUTPUT + + rotations: SETofROTATION + possible-outputs: LISTofOUTPUT +└─── + + Errors: Window + + RRGetCrtcModes returns information about the current and available + configurations for the specified crtc connected to the screen + associated with 'window'. + + If 'config-timestamp' does not match the current configuration + timestamp (as returned by RRGetScreenResources), 'status' is set to + InvalidConfigTime and the remaining reply data is empty. Otherwise, + 'status' is set to Success. + + 'timestamp' indicates when the configuration was last set. + + 'x' and 'y' indicate the position of this CRTC within the screen + region. They will be set to 0 when the CRTC is disabled. + + 'width' and 'height' indicate the size of the area within the screen + presented by this CRTC. This may be different than the size of the + mode due to rotation. They will be set to 0 when the CRTC + is disabled. + + 'mode' indicates which mode is active, or None indicating that the + CRTC has been disabled and is not displaying the screen contents. + + 'rotation' indicates the active rotation. It is set to Rotate_0 + when the CRTC is disabled. + + 'outputs' is the list of outputs currently connected to this CRTC + and is empty when the CRTC is disabled. + + 'rotations' contains the set of rotations and reflections supported + by the CRTC. + + 'possible-outputs' lists all of the outputs which may be connected + to this CRTC. + +┌─── + RRSetCrtcConfig + crtc: CRTC + timestamp: TIMESTAMP + config-timestamp: TIMESTAMP + x, y: INT16 + mode: MODE + rotation: ROTATION + outputs: LISTofOUTPUT + ▶ + status: RRCONFIGSTATUS + new-timestamp: TIMESTAMP +└─── + Errors: Value, Match + + If 'timestamp' is less than the time when the configuration was last + successfully set, the request is ignored and InvalidTime returned in + status. + + If 'config-timestamp' is not equal to when the monitor's + configuration last changed, the request is ignored and + InvalidConfigTime returned in status. This could occur if the + monitor changed since you last made a RRGetScreenInfo request, + perhaps by a different monitor being connected to the machine. + Rather than allowing an incorrect call to be executed based on stale + data, the server will ignore the request. + + 'x' and 'y' contain the desired location within the screen for this + monitor's content. 'x' and 'y' must be within the screen size, else + a Value error results. + + 'mode' is either the desired mode or None indicating the CRTC should + be disabled. If 'mode' is not one of these values, a Value + error results. 'mode' must be valid for all of the configured outputs, + else a Match error. + + 'rotation' contains the desired rotation along with which + reflections should be enabled. The rotation and reflection values + must be among those allowed for this monitor, else a Value error + results. + + 'outputs' contains the set of outputs that this CRTC should be + connected to. The set must be among the list of acceptable output + sets for this CRTC or a Match error results. + + If 'mode' is None, then 'outputs' must be empty, else a Match error + results. Conversely, if 'mode' is not None, then 'outputs' must not be + empty, else a Match error results. + + This request may fail for other indeterminate reasons, in which case + 'status' will be set to Failed and no configuration change will be + made. + + This request sets the CRTC to the specified position, mode, rotation + and reflection. The entire area of the CRTC must fit within the + screen size, else a Match error results. As an example, rotating the + screen so that a single CRTC fills the entire screen before and + after may necessitate disabling the CRTC, resizing the screen, + then re-enabling the CRTC at the new configuration to avoid an + invalid intermediate configuration. + + If panning is enabled, the width and height of the panning and the + tracking areas are clamped to the new mode size. + Disabled panning axes remain disabled. + Panning borders are disabled if their requirements are no longer met + (see RRSetPanning). + + When this request succeeds, 'status' contains Success and the + requested changes to configuration will have been made. + + 'new-time-stamp' contains the time at which this request was + executed. + +┌─── + RRGetCrtcGammaSize + crtc: CRTC + ▶ + size: CARD16 +└─── + Errors: Crtc + + This request returns the size of the gamma ramps used by 'crtc'. + +┌─── + RRGetCrtcGamma + crtc: CRTC + ▶ + red: LISTofCARD16 + green: LISTofCARD16 + blue: LISTofCARD16 +└─── + Errors: Crtc + + This request returns the currently set gamma ramps for 'crtc'. All + three lists will be the size returned by the RRGetCrtcGammaSize + request. + +┌─── + RRSetCrtcGamma + crtc: CRTC + red: LISTofCARD16 + green: LISTofCARD16 + blue: LISTofCARD16 +└─── + Errors: Crtc, Match + + This request sets the gamma ramps for 'crtc'. All three lists + must be the size returned by RRGetCrtcGammaSize else a Value error + results. + +7.2. Extension Requests added in version 1.3 of the extension + +┌─── + RRGetScreenResourcesCurrent + window: WINDOW + ▶ + timestamp: TIMESTAMP + config-timestamp: TIMESTAMP + crtcs: LISTofCRTC + outputs: LISTofOUTPUT + modes: LISTofMODEINFO +└─── + Errors: Window + + RRGetScreenResourcesCurrent returns the list of outputs and crtcs + connected to the screen associated with 'window'. + + 'timestamp' indicates when the configuration was last set. + + 'config-timestamp' indicates when the configuration information last + changed. Requests to configure the output will fail unless the + timestamp indicates that the information the client is using is up + to date, to ensure clients can be well behaved in the face of race + conditions. + + 'crtcs' contains the list of CRTCs associated with the screen. + + 'outputs' contains the list of outputs associated with the screen. + + 'modes' contains the list of modes associated with the screen. + + Unlike RRGetScreenResources, this merely returns the current + configuration, and does not poll for hardware changes. + +┌─── + RRSetCrtcTransform + crtc: CRTC + transform: TRANSFORM + filter: STRING8 + values: LISTofFIXED +└─── + Errors: Crtc, Match + + This request provides a mechanism that is more general than the + existing rotation and reflection values for describing the + transformation from frame buffer image to crtc presentation. + 'transform' is a full 2D projective transformation from screen + coordinate space to crtc coordinate space. This transformation is + applied before the rotation and reflection values to compute the + complete transform. + + 'filter' and 'values' specify a Render filter that may be used by the + server when transforming data from frame buffer to crtc. + + This request sets the transform to be used at the next + RRSetCrtcConfig request execution; it does not cause any change to + occur in the current configuration. + + When a non-identity transformation is in use, the rectangle returned + by RRGetCrtcInfo defines the bounding rectangle of the screen that is + projected to the crtc. It is this projected rectangle which must be + within the area of the screen when the mode is set. + +┌─── + RRGetCrtcTransform + crtc: CRTC + ▶ + pending-transform: TRANSFORM + pending-filter: STRING8 + pending-values: LISTofFIXED + current-transform: TRANSFORM + current-filter: STRING8 + current-values: LISTofFIXED +└─── + + This request returns the pending and current transforms for the + specified CRTC. The pending transform will be the same as the current + transform if no new pending transform has been set since the last call + to RRSetCrtcConfig. + +┌─── + RRGetPanning + crtc: CRTC + ▶ + status: RRCONFIGSTATUS + timestamp: TIMESTAMP + left, top, width, height: CARD16 + track_left, track_top, track_width, track_height: CARD16 + border_left, border_top, border_right, border_bottom: INT16 +└─── + + Errors: Crtc + + Version 1.3 adds panning support again. If multiple crtcs are active + the panning behavior can be defined per crtc individually. + RRGetPanning returns information about the currently set panning + configuration for the specified crtc. If the CRTC does not support + panning, all fields (except timestamp) will be 0. + + 'timestamp' indicates when the configuration was last set. + + All other entries are explained for RRSetPanning. + +┌─── + RRSetPanning + crtc: CRTC + timestamp: TIMESTAMP + left, top, width, height: CARD16 + track_left, track_top, track_width, track_height: CARD16 + border_left, border_top, border_right, border_bottom: INT16 + ▶ + status: RRCONFIGSTATUS + new-timestamp: TIMESTAMP +└─── + Errors: Crtc, Match + + This request sets the panning parameters. As soon as panning is + enabled, the CRTC position can change with every pointer move. + RRCrtcChangeNotify events are sent to the clients requesting those. + + If 'timestamp' is less than the time when the configuration was last + successfully set, the request is ignored and InvalidTime returned in + status. + + ┌──┳━━━━━━━━━━━━━━┳─────┬ ─ ─ ─ ─ ─ ┐ + │ ┃ CRTC ┃ │ + │ ┃ ┃ │ │ + │ ┃ X┃→ │ + │ ┃ ┃ │ │ framebuffer + │ ┗━━━━━━━━━━━━━━┛ │ + │ │ │ + │panning area │ + └───────────────────────┴ ─ ─ ─ ─ ─ ┘ + + 'left', 'top', 'width', and 'height' contain the total panning area + for this CRTC. 'width' has to be larger than or equal to the CRTC's + width or 0, and 'left'+'width' must be within the screen size, else a + Match error results. Equivalent restrictions for the height exist. + 'width' or 'height' set to 0 indicate that panning should be disabled + on the according axis. Setting 'width'/'height' to the CRTC's + width/height will disable panning on the X/Y axis as well, but + RRSetScreenSize will silently enable panning if the screen size is + increased. This does not happen if set to 0. + + ┌────────┳━━━━━━━━━━━━━━┳ ─ ─ ─ ─ ─ ┐ + │ ┃ CRTC ┃ + │ ┃ ┃ │ + │ ┃ ┃ + │ ┃ ┃ │ tracking area + │ ┗━━━━━━━━━━━━━━┫ X + │ ↓ │ ↓ │ + │panning area │ + └───────────────────────┴ ─ ─ ─ ─ ─ ┘ + + 'track_left', 'track_top', 'track_width', and 'track_height' contain + the pointer area for which the panning region is updated. For normal + use cases it should enclose the panning area minus borders, and is + typically set to either the panning area minus borders, or to the + total screen size. If set to the total screen size, the CRTC will pan + in the remaining axis even if the pointer is outside the panning area + on a different CRTC, as shown in the figure above. If the pointer is + outside the tracking area, the CRTC will not pan. Zero can be used as + an alias for the total screen size. + + ┌──┳━━━━━━━━━━━━━━┳────────────┐ + │ ┃ CRTC ┃ │ + │ ┃ ┃ │ + │ ┃ ┃→ │ + │ ┃ X←→┃ │ + │ ┃ border_right │ + │ ┗━━━━━━━━━━━━━━┛ │ + │ │ + │panning area │ + └──────────────────────────────┘ + + 'border_left', 'border_top', 'border_right', and 'border_bottom' + define the distances from the CRTC borders that will activate panning + if the pointer hits them. If the borders are 0, the screen will pan + when the pointer hits the CRTC borders (behavior of pre-RandR Xserver + panning). If the borders are positive, the screen will pan when the + pointer gets close to the CRTC borders, if they are negative, the + screen will only pan when the pointer is already way past the CRTC + borders. Negative values might confuse users and disable panning to + the very edges of the screen. Thus they are discouraged. + border_left + border_right has to be lower or equal than the CRTC's + width, else a Match error results. An equivalent restriction for the + height exists. + + Screen size changes update the panning and the tracking areas to the + new size. Both screen size changes and mode changes clamp these areas + to the current CRTC size. In these cases panning borders are disabled + if their requirements are no longer met. + + When this request succeeds, 'status' contains Success and the + requested changes to configuration will have been made. + + 'new-time-stamp' contains the time at which this request was + executed. + +┌─── + RRSetOutputPrimary + window: WINDOW + output: OUTPUT +└─── + Errors: Match, Output, Window + + RRSetOutputPrimary marks 'output' as the primary output for the + screen with the same root window as 'window'. This output's CRTC + will be sorted to the front of the list in Xinerama and RANDR + geometry requests for the benefit of older applications. The + default primary output is None, and None is a legal value to pass + to RRSetOutputPrimary. This request is expected to be used by + desktop environments to mark the screen that should hold the primary + menu bar or panel. + + As this changes the logical layout of the screen, ConfigureNotify + and RRScreenChangeNotify will be generated on the appropriate root + window when the primary output is changed by this call. This request + also generates RROutputChangeNotify events on the outputs that gained + and lost primary status. + + If an output is disconnected asynchronously (eg. due to recabling), + the primary status does not change, but RROutputChangeNotify events + will be generated if the hardware is capable of detecting this; + clients are expected to reconfigure if appropriate. + + If an output is deleted (eg. due to device hotplug), the server will + act as though None was passed to RRSetOutputPrimary, including + generating the appropriate events. + +┌─── + RRGetOutputPrimary + window: WINDOW + ▶ + output: OUTPUT +└─── + Errors: Window + + RRGetOutputPrimary returns the primary output for the screen. + + ❧❧❧❧❧❧❧❧❧❧❧ + +7.3. Extension Requests added in version 1.4 of the extension. + +┌─── + RRQueryScanoutPixmaps + window: WINDOW + ▶ + infos: LISTofSCANOUTPIXMAPINFO +└─── + Errors: Window + + This request returns information about the server support for + alternate scanout pixmaps. For each pictformat, there is a set + of rotations and a maximum supported size. The rotations here + are those provided by the scanout hardware itself, not by + software emulation. + +┌─── + RRCreateScanoutPixmap + pixmap: PIXMAP + drawable: DRAWABLE + width, height: CARD16 + format: PICTFORMAT + rotations: SETofROTATION +└─── + Errors: Drawable, Match, Value + + Creates a pixmap which can subsequently be used as a scanout + buffer for the screen associated with 'drawable'. 'rotations' + is the set of rotation values which may be used with the + resulting scanout buffer when it is associated with a CRTC. + + 'format' must be one of the supported scanout formats, or a + Match error results. + + 'width' and 'height' must be within the supported range for + the specified format or a Value error results. + + 'rotations' must be a subset of those supported for the + specified format or a Match error results. + +┌─── + RRSetCrtcSpriteTransform + crtc: CRTC + position-transform: TRANSFORM + image-transform: TRANSFORM +└─── + Sets the sprite transforms for the specified crtc, any sprites + presented on this crtc will have their positions transformed + by the position-transform matrix. Sprite images displayed on the crtc + will be transformed by the image-transform matrix. + +┌─── + RRGetCrtcSpriteTransform + crtc: CRTC + ▶ + position-transform: TRANSFORM + image-transform: TRANSFORM +└─── + Gets the sprite transforms for the specified crtc. + +┌─── + RRSetCrtcConfigs + drawable: DRAWABLE + set: SETofSCREENFLAG + screen-pixmap-width: CARD16 + screen-pixmap-height: CARD16 + screen-width: CARD16 + screen-height: CARD16 + width-in-millimeters: CARD32 + height-in-millimeters: CARD32 + configs: LISTofCRTCCONFIG + ▶ + status: RRCONFIGSTATUS +└─── + Errors: Value, Match + + This works much like RRSetScreenSize followed by a sequence of + RRSetCrtcConfig, except that the entire configuration can be set + in a single operation, either succeeding or failing without + any partial execution. + + If 'set' includes 'SetScreenPixmapSize', then + 'screen-pixmap-width' and 'screen-pixmap-height' specify the + new screen pixmap size. + + If 'set' includes 'SetScreenSize', then 'screen-width' and + 'screen-height' specify the new screen size. + + If 'set' includes 'SetScreenSizeInMillimeters', then + 'width-in-millimeters' and 'height-in-millimeters' specify + the new screen physical size. + + If 'set' includes 'SetScreenCrtcs', then 'configs' includes + the list of new CRTC configurations. + + In addition to the pre-1.4 semantics, this request adds the + ability to specific a scanout pixmap for each crtc, and + integrates the 1.4 sprite transform request as well. + + ❧❧❧❧❧❧❧❧❧❧❧ + +8. Extension Events + +Clients MAY select for ConfigureNotify on the root window to be +informed of screen changes. This may be advantageous if all your +client needs to know is the size of the root window, as it avoids +round trips to set up the extension. + +RRScreenChangeNotify is sent if RRSelectInput has requested it +whenever properties of the screen change, which may be due to external +factors, such as re-cabling a monitor, etc. + +┌─── + RRScreenChangeNotify + + rotation: ROTATION; new rotation + sequenceNumber: CARD16 low 16 bits of request seq. number + timestamp: TIMESTAMP time screen was changed + configTimestamp: TIMESTAMP time config data was changed + root: WINDOW root window of screen + window: WINDOW window requesting notification + size-id: SIZEID index of new SCREENSIZE + subpixelOrder: SUBPIXELORDER order of subpixels + widthInPixels: CARD16 width in pixels of the new SCREENSIZE + heightInPixels: CARD16 height in pixels of the new SCREENSIZE + widthInMillimeters: CARD16 width in mm of the new SCREENSIZE + heightInMillimeters: CARD16 height in mm of the new SCREENSIZE +└─── + This event is generated whenever the screen configuration is changed + and sent to requesting clients. 'timestamp' indicates when the + screen configuration was changed. 'configTimestamp' says when the + last time the configuration was changed. 'root' is the root of the + screen the change occurred on, 'window' is window selecting for this + event. 'size-id' contains the index of the current size. + + This event is sent whenever the screen's configuration changes + or if a new screen configuration becomes available that was + not available in the past. In this case (config-timestamp in + the event not being equal to the config-timestamp returned in + the last call to RRGetScreenInfo), the client MUST call + RRGetScreenInfo to update its view of possible screen + configurations to have a correct view of possible screen + organizations. + + Clients which select screen change notification events may be + sent an event immediately if the screen configuration was + changed between when they connected to the X server and + selected for notification. This is to prevent a common race + that might occur on log-in, where many applications start up + just at the time when a display manager or log in script might + be changing the screen size or configuration. + + Note that the sizes in this event reflect the new SCREENSIZE and + thus will appear rotated by the 'rotation' parameter from the sizes + of the screen itself. In other words, when rotation is 90 or 270, + widthInPixels in this event will be the same as the height value + from a ConfigureNotify that reflects the same size change. This + will probably confuse developers. + +8.1 Events added in version 1.2 of the RandR extension + +┌─── + RROutputChangeNotify: + timestamp: TIMESTAMP time screen was reconfigured + config-timestamp: TIMESTAMP time available config data was changed + window: WINDOW window requesting notification + output: OUTPUT output affected by change + crtc: CRTC connected CRTC or None + mode: MODE mode in use on CRTC or None + connection: CONNECTION connection status +└─── + + This event is generated whenever the available output configurations + have changed and is sent to requesting clients. 'timestamp' + indicates when the crtc configuration was changed by a client. + 'config-timestamp' says when the last time the available + configurations changed. 'root' is the root of the screen the change + occurred on, 'window' is window selecting for this event. The + precise change can be detected by examining the new state of the + system. + +┌─── + RROutputPropertyNotify: + window: WINDOW window requesting notification + output: OUTPUT output affected by change + atom: ATOM affected property + time: TIMESTAMP time property was changed + subpixel-order: SUBPIXELORDER order of subpixels + state: { NewValue, Deleted } new property state +└─── + + This event is reported to clients selecting RROutputPropertyChange + on the window and is generated with state NewValue when a property + of the window is changed using RRChangeOutputProperty even when + adding zero-length data and when replacing all or part of a property + with identical data. It is generated with state Deleted when a + property of the window is deleted using either + RRDeleteOutputProperty or RRGetOutputProperty. The timestamp + indicates the server time when the property was changed. + +┌─── + RRCrtcChangeNotify + timestamp: TIMESTAMP time monitor was changed + window: WINDOW window requesting notification + crtc: CRTC CRTC which changed + mode: MODE new mode + rotation: ROTATION; new rotation + x: INT16 x position of CRTC within screen + y: INT16 y position of CRTC within screen + width: CARD16 width of new mode + height: CARD16 height of new mode +└─── + This event is generated whenever the CRTC configuration is changed + and sent to requesting clients. 'timestamp' indicates when the + CRTC configuration was changed. 'window' is window selecting for this + event. 'mode' is the new mode, or None if the crtc is disabled. + 'x' and 'y' mark the location in the screen where this CRTC + is reading data. 'width' and 'height' indicate the size of the + mode. 'x', 'y, 'width' and 'height' are all zero when 'mode' is None. + + This event is sent whenever the monitor's configuration changes + or if a new monitor configuration becomes available that was + not available in the past. In this case, the client MUST call + RRGetCrtcModes to update its view of possible monitor + configurations to have a correct view of possible monitor + organizations. + + Clients which select monitor change notification events may be + sent an event immediately if the monitor configuration was + changed between when they connected to the X server and + selected for notification. This is to prevent a common race + that might occur on log-in, where many applications start up + just at the time when a display manager or log in script might + be changing the monitor size or configuration. + + ❧❧❧❧❧❧❧❧❧❧❧ + +9. Properties + +Properties are used for output specific parameters, and for announcing +static or rarely changing data. Announced data is typically +immutable. Properties are also used for evaluating new parameters +before adding them to the RandR protocol. + +The following properties are hereby declared official, and drivers SHOULD +prefix driver specific properties with '_', unless they are planned to be +added to this specification. List values, that are not declared by the table +below, and will remain driver specific or are not planned to be added to this +specification, SHOULD be prefixed with "_" as well in order to avoid name +space or semantics clashes with future extensions of these values. + +Beginning with version 1.3 of the RandR extension, certain properties +are mandatory and MUST be provided by implementations. Earlier +versions of the RandR extension MAY provide these properties as well, +as long as the semantics are not altered. Clients SHOULD fall back +gracefully to lower version functionality, though, if the driver +doesn't handle a mandatory property correctly. + +9.1 Known properties + + "Backlight" aka RR_PROPERTY_BACKLIGHT + Type: int32 + Flags: - + Range/List: 0-x (driver specific) + + This property controls the brightness on laptop panels and equivalent + displays with a backlight controller. The driver specific maximum + value MUST turn the backlight to full brightness, 1 SHOULD turn the + backlight to minimum brightness, 0 SHOULD turn the backlight off. + + "CloneList" aka RR_PROPERTY_CLONE_LIST + Type: int32 [2*n] / Atom pairs + Flags: Immutable + Range/List: 0- + + Some combinations of outputs on some cards cannot be served + independently from each other, because they are wired up to the same + encoder outputs. + This property lists all output + signal format pairs that are + driven together with this output, and thus can only be programmed in + clone mode with the same CRTC. + This property MUST be symmetric, but may change with changing signal + format. I.e. if the property for DVI-1/VGA specifies VGA-1/VGA to be + cloned, VGA-1/VGA has to list DVI-1/VGA as well. + Outputs / format pairs listed in this property MUST be included in the + CompatibilityList. + + "CompatibilityList" aka RR_PROPERTY_COMPATIBILITY_LIST + Type: int32 [2*n] / Atom pairs + Flags: Immutable + Range/List: 0- + + Some combinations of outputs on some cards cannot be served at all, + because the according encoder is only capable of driving one output at + a time. + This property lists all output + signal format pairs that can be + driven together with this output. NULL atoms specify any output / any + signal format, respectively. + This property MUST be symmetric, but may change with changing signal + format. I.e. if the property for DVI-1/TMDS specifies VGA-1/VGA to be + available, VGA-1/VGA has to list DVI-1/TMDS as well. + + "ConnectorNumber" aka RR_PROPERTY_CONNECTOR_NUMBER + Type: int32 + Flags: Immutable, Static + Range/List: 0- + + Outputs that route their signal to the same connector MUST + have the same connector number. Outputs with the same + connector number MUST route their signal to the same + connector, except if it is 0, which indicates unknown + connectivity. 1 is called the primary connector, 2 the + secondary. 3 is typically a TV connector, but that is completely + driver / hardware dependent. + Outputs with the same connector number SHOULD have the same + connector type. Meaning and client behavior for mismatching + connector types is undefined at the moment. + + "ConnectorType" aka RR_PROPERTY_CONNECTOR_TYPE + Type: int32 / Atom + Flags: Immutable, Static + Range/List: unknown VGA DVI DVI‐I DVI‐A DVI‐D HDMI Panel + TV TV-Composite TV-SVideo TV-Component + TV-SCART TV-C4 DisplayPort + + Connector type, as far as known to the driver. + Values with dashes (TV‐Composite) describe more specific versions of + the base values (TV). The former SHOULD be used if the connector is + not capable of producing other signal formats. The later SHOULD be + used if the exact connector is unknown, or the connector is a + multi‐format connector that is not described otherwise. DVI, for + instance, SHOULD be handled like a DVI‐I connector, unless additional + information is available to the user agent. PANEL describes + laptop‐internal (normally LVDS) displays. TV, TV‐SCART, TV‐Component, + and TV‐C4 with signal format VGA are valid combinations and describe + RGB TV signals. + + "EDID" aka RR_PROPERTY_RANDR_EDID + Type: int8 [n] + Flags: Immutable + Range/List: - + + Raw EDID data from the device attached to the according + output. Should include main EDID data and all extension + blocks. Previously known as EdidData. + + "SignalFormat" aka RR_PROPERTY_SIGNAL_FORMAT + Type: int32 / Atom + Flags: - + Range/List: unknown VGA TMDS LVDS Composite Composite-PAL + Composite-NTSC Composite-SECAM SVideo + Component DisplayPort + + Signal format / physical protocol format that is used for the + specified output. valid-values lists all possible formats on this + output, which SHOULD be a subset of the list above and MUST be static. + Values with dashes (Composite-PAL) describe more specific versions of + the base values (Composite) and SHOULD be used if known to the driver. + A driver MAY change this property of an output if the underlying + hardware indicates a protocol change (e.g. TV formats). Clients are + allowed to change the signal format in order to select a different + signal format (e.g. Composite etc.) or physical protocol (e.g. VGA or + TMDS on DVI-I). + Laptop panels SHOULD not be detected with this property, but rather by + ConnectorType. + + "SignalProperties" aka RR_PROPERTY_SIGNAL_FORMAT + Type: int32 [n] / Atom + Flags: - + Range/List: For Composite signals: + NTSC NTSC-M NTSC-J NTSC-N NTSC-4.43 NTSC-film + PAL PAL-B PAL-G PAL-H PAL-H PAL-I PAL-M PAL-D + PAL-N PAL-Nc PAL-L PAL-60 + SECAM SECAM-L SECAM-B SECAM-G SECAM-D SECAM-K + SECAM-H SECAM-K + For TMDS signals: + SingleLink DualLink + For DisplayPort signals: + Lane1 Lane2 Lane4 LowSpeed HiSpeed + + Properties of the signal format that is currently used for the + specified output. valid-values lists all possible properties on this + output, which SHOULD be a subset of the list above. It will change if + SignalFormat changes. Multiple properties are allowed. + Values with dashes (PAL-B) describe more specific versions of the base + values (PAL) and SHOULD be used if known to the driver. A driver MAY + change this property of an output if the underlying hardware indicates + a signal change (e.g. TV formats). Clients are allowed to change the + properties in order to select a different signal subformat. + + +9.2 Properties introduced with version 1.2 of the RandR extension + +Property Immutable Mandatory since +──────── ───────── ─────────────── +EDID yes n/a + +EDID is provided by the RandR frontend, thus not driver specific. + + +9.3 Properties introduced with version 1.3 of the RandR extension + +Property Immutable Mandatory since +──────── ───────── ─────────────── +CloneList yes not mandatory +CompatibilityList yes not mandatory +ConnectorNumber yes: static not mandatory +ConnectorType yes: static RandR 1.3 +SignalFormat no RandR 1.3 +SignalProperties no not mandatory + +9.4 Properties introduced with version 1.3.1 of the RandR extension + +Property Immutable Mandatory since +──────── ───────── ─────────────── +Backlight no not mandatory + + ❧❧❧❧❧❧❧❧❧❧❧ + +10. Extension Versioning + +The RandR extension was developed in parallel with the implementation +to ensure the feasibility of various portions of the design. As +portions of the extension are implemented, the version number of the +extension has changed to reflect the portions of the standard provided. +This document describes the version 1.2 of the specification, the +partial implementations have version numbers less than that. Here's a +list of what each version provided: + + 0.0: This prototype implemented resize and rotation in the + TinyX server Used approximately the protocol described in + the Usenix paper. Appeared in the TinyX server in + XFree86 4.2, but not in the XFree86 main server. + + 0.1: Added subpixel order, added an event for subpixel order. + This version was never checked in to XFree86 CVS. + + 1.0: Implements resize, rotation, and reflection. Implemented + both in the XFree86 main server (size change only at this + date), and fully (size change, rotation, and reflection) + in XFree86's TinyX server. + + 1.1: Added refresh rates + + 1.2: Separate screens from CRTCs and outputs, switch to full VESA + modes + + 1.3: Added cheap version of RRGetScreenResources. Added CRTC + transformations. Added panning. Added primary outputs. + Added standard properties. + +Compatibility between 0.0 and 1.0 was *NOT* preserved, and 0.0 clients +will fail against 1.0 servers. The wire encoding op-codes were +changed for GetScreenInfo to ensure this failure in a relatively +graceful way. Version 1.1 servers and clients are cross compatible with +1.0. Version 1.1 is considered to be stable and we intend upward +compatibility from this point. Version 1.2 offers an extended model of the +system with multiple output support. Version 1.3 adds a cheap version of +GetScreenResources to avoid expensive DDC operations, CRTC transformations, +panning, and the primary output concept. 1.2 and 1.3 are backward-compatible +with 1.1. + + ❧❧❧❧❧❧❧❧❧❧❧ + +11. Relationship with other extensions + +Two other extensions have a direct relationship with this extension. This +section attempts to explain how these three are supposed to work together. + +11.1 XFree86-VidModeExtension + +XFree86-VidModeExtension changes the configuration of a single monitor +attached to the screen without changing the configuration of the screen +itself. It provides the ability to specify new mode lines for the server to +use along with selecting among existing mode lines. As it uses screen +numbers instead of window identifiers, it can be used to affect multiple +monitors in a single-screen Xinerama configuration. However, the association +between screen numbers and root windows in a multi-Screen environment is not +defined by the extension. Version 2.0 of this extension added the ability to +adjust the DAC values in a TrueColor server to modify the brightness curves +of the display. + +All of the utility of this extension is subsumed by RandR version 1.2, RandR +should be used in preference to XFree86-VidModeExtension where both are +present. + +11.2 Xinerama + +Xinerama provides a mechanism for describing the relationship between the +overall screen display and monitors placed within that area. As such, it +provides the query functionality of RandR 1.2 without any of the +configuration functionality. Applications using Xinerama to discover +monitor geometry can continue to do so, with the caveat that they will not be +informed of changes when they occur. However, Xinerama configuration data +will be updated, so applications selecting for RandR notification and +re-querying the configuration with the Xinerama extension will get updated +information. It is probably better to view RandR as a superset of Xinerama +at this point and use it in preference to Xinerama where both are present. + + ❧❧❧❧❧❧❧❧❧❧❧ + +Appendix A. Protocol Encoding + +Syntactic Conventions + +This document uses the same syntactic conventions as the core X +protocol encoding document. + +A.1 Common Types + +┌─── + ROTATION + 0x0001 Rotate_0 + 0x0002 Rotate_90 + 0x0004 Rotate_180 + 0x0008 Rotate_270 + 0x0010 Reflect_X + 0x0020 Reflect_Y +└─── + Used to encode both sets of possible rotations and individual + selected rotations. + +┌─── + RRSELECTMASK + 0x0001 ScreenChangeNotifyMask + 0x0002 CrtcChangeNotifyMask Added in version 1.2 + 0x0004 OutputChangeNotifyMask Added in version 1.2 + 0x0008 OutputPropertyNotifyMask Added in version 1.2 +└─── + Event select mask for RRSelectInput + +┌─── + RRCONFIGSTATUS + 0x0 Success + 0x1 InvalidConfigTime + 0x2 InvalidTime + 0x3 Failed +└─── + Return status for requests which depend on time. + +┌─── + MODEINFO (32) Added in version 1.2 + 4 CARD32 id + 2 CARD16 width in pixels + 2 CARD16 height in pixels + 4 CARD32 dot clock + 2 CARD16 h sync start + 2 CARD16 h sync end + 2 CARD16 h total + 2 CARD16 h skew + 2 CARD16 v sync start + 2 CARD16 v sync end + 2 CARD16 v total + 2 CARD16 name length + 4 SETofMODEFLAG mode flags +└─── + + An output mode specifies the complete CRTC timings for + a specific mode. The vertical and horizontal synchronization rates + can be computed given the dot clock and the h total/v total + values. If the dot clock is zero, then all of the timing + parameters and flags are not used, and must be zero as this + indicates that the timings are unknown or otherwise unused. + The name itself will be encoded separately in each usage. + +┌─── + MODEFLAG + 0x00000001 HSyncPositive + 0x00000002 HSyncNegative + 0x00000004 VSyncPositive + 0x00000008 VSyncNegative + 0x00000010 Interlace + 0x00000020 DoubleScan + 0x00000040 CSync + 0x00000080 CSyncPositive + 0x00000100 CSyncNegative + 0x00000200 HSkewPresent + 0x00000400 BCast + 0x00000800 PixelMultiplex + 0x00001000 DoubleClock + 0x00002000 ClockDivideBy2 +└─── +┌─── + CONNECTION + 0 Connected + 1 Disconnected + 2 UnknownConnection +└─── + + +A.2 Protocol Requests + +Opcodes 1 and 3 were used in the 0.0 protocols, and will return +errors if used in version 1.0. + +┌─── + RRQueryVersion + + 1 CARD8 major opcode + 1 0 RandR opcode + 2 3 length + 4 CARD32 major version + 4 CARD32 minor version + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 0 reply length + 1 CARD32 major version + 1 CARD32 minor version +└─── +┌─── + RRSetScreenConfig + + 1 CARD8 major opcode + 1 2 RandR opcode + 2 6 length + 4 WINDOW window on screen to be configured + 4 TIMESTAMP timestamp + 4 TIMESTAMP config timestamp + 2 SIZEID size index + 2 ROTATION rotation/reflection + 2 CARD16 refresh rate (1.1 only) + 2 CARD16 pad + ▶ + 1 1 Reply + 1 RRCONFIGSTATUS status + 2 CARD16 sequence number + 4 0 reply length + 4 TIMESTAMP new timestamp + 4 TIMESTAMP new configuration timestamp + 4 WINDOW root + 2 SUBPIXELORDER subpixel order defined in Render + 2 CARD16 pad4 + 4 CARD32 pad5 + 4 CARD32 pad6 +└─── +┌─── + RRSelectInput + + 1 CARD8 major opcode + 1 4 RandR opcode + 2 3 length + 4 WINDOW window + 2 SETofRRSELECTMASK enable + 2 CARD16 pad +└─── +┌─── + RRGetScreenInfo + + 1 CARD8 major opcode + 1 5 RandR opcode + 2 2 length + 4 WINDOW window + ▶ + 1 1 Reply + 1 CARD8 set of Rotations + 2 CARD16 sequence number + 4 0 reply length + 4 WINDOW root window + 4 TIMESTAMP timestamp + 4 TIMESTAMP config timestamp + 2 CARD16 number of SCREENSIZE following + 2 SIZEID current size index + 2 ROTATION current rotation and reflection + 2 CARD16 current rate (added in version 1.1) + 2 CARD16 length of rate info (number of CARD16s) + 2 CARD16 pad + + SCREENSIZE + 2 CARD16 width in pixels + 2 CARD16 height in pixels + 2 CARD16 width in millimeters + 2 CARD16 height in millimeters + + REFRESH + 2 CARD16 number of rates (n) + 2n CARD16 rates +└─── + +A.2.1 Protocol Requests added with version 1.2 + +┌─── + RRGetScreenSizeRange + 1 CARD8 major opcode + 1 6 RandR opcode + 2 2 length + 4 WINDOW window + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 0 reply length + 2 CARD16 minWidth + 2 CARD16 minHeight + 2 CARD16 maxWidth + 2 CARD16 maxHeight + 16 unused +└─── +┌─── + RRSetScreenSize + 1 CARD8 major opcode + 1 7 RandR opcode + 2 5 length + 4 WINDOW window + 2 CARD16 width + 2 CARD16 height + 4 CARD32 width in millimeters + 4 CARD32 height in millimeters +└─── +┌─── + RRGetScreenResources + 1 CARD8 major opcode + 1 8 RandR opcode + 2 2 length + 4 WINDOW window + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 c+o+8m+(b+p)/4 reply length + 4 TIMESTAMP timestamp + 4 TIMESTAMP config-timestamp + 2 c number of CRTCs + 2 o number of outputs + 2 m number of modeinfos + 2 b total bytes in mode names + 8 unused + 4c LISTofCRTC crtcs + 4o LISTofOUTPUT outputs + 32m LISTofMODEINFO modeinfos + b STRING8 mode names + p unused, p=pad(b) +└─── +┌─── + RRGetOutputInfo + 1 CARD8 major opcode + 1 9 RandR opcode + 2 3 length + 4 OUTPUT output + 4 TIMESTAMP config-timestamp + ▶ + 1 1 Reply + 1 RRCONFIGSTATUS status + 2 CARD16 sequence number + 4 1+c+m+(n+p)/4 reply length + 4 TIMESTAMP timestamp + 4 CRTC current connected crtc + 4 CARD32 width in millimeters + 4 CARD32 height in millimeters + 1 CONNECTION connection + 1 SUBPIXELORDER subpixel-order + 2 c number of CRTCs + 2 m number of modes + 2 p number of preferred modes + 2 o number of clones + 2 n length of name + 4c LISTofCRTC crtcs + 4m LISTofMODE modes + 4o LISTofOUTPUT clones + n STRING8 name + p unused, p=pad(n) +└─── +┌─── + RRListOutputProperties + 1 CARD8 major opcode + 1 10 RandR opcode + 2 2 length + 4 OUTPUT output + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 n reply length + 2 n number of ATOMs in atoms + 22 unused + 4n LISTofATOM atoms +└─── +┌─── + RRQueryOutputProperty + 1 CARD8 major opcode + 1 11 RandR opcode + 2 3 request length + 4 OUTPUT output + 4 ATOM property + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 n reply length + 1 BOOL pending + 1 BOOL range + 1 BOOL immutable + 21 unused + 4n LISTofINT32 valid values +└─── +┌─── + RRConfigureOutputProperty + 1 CARD8 major opcode + 1 12 RandR opcode + 2 4+n request length + 4 OUTPUT output + 4 ATOM property + 1 BOOL pending + 1 BOOL range + 2 unused + 4n LISTofINT32 valid values +└─── +┌─── + RRChangeOutputProperty + 1 CARD8 major opcode + 1 13 RandR opcode + 2 6+(n+p)/4 request length + 4 OUTPUT output + 4 ATOM property + 4 ATOM type + 1 CARD8 format + 1 mode + 0 Replace + 1 Prepend + 2 Append + 2 unused + 4 CARD32 length of data in format units + (= n for format = 8) + (= n/2 for format = 16) + (= n/4 for format = 32) + n LISTofBYTE data + (n is a multiple of 2 for format = 16) + (n is a multiple of 4 for format = 32) + p unused, p=pad(n) +└─── +┌─── + RRDeleteOutputProperty + 1 CARD8 major opcode + 1 14 RandR opcode + 2 3 request length + 4 OUTPUT output + 4 ATOM property +└─── +┌─── + RRGetOutputProperty + 1 CARD8 major opcode + 1 15 RandR opcode + 2 7 request length + 4 OUTPUT output + 4 ATOM property + 4 ATOM type + 0 AnyPropertyType + 4 CARD32 long-offset + 4 CARD32 long-length + 1 BOOL delete + 1 BOOL pending + 2 unused + ▶ + 1 1 Reply + 1 CARD8 format + 2 CARD16 sequence number + 4 (n+p)/4 reply length + 4 ATOM type + 0 None + 4 CARD32 bytes-after + 4 CARD32 length of value in format units + (= 0 for format = 0) + (= n for format = 8) + (= n/2 for format = 16) + (= n/4 for format = 32) + 12 unused + n LISTofBYTE value + (n is zero for format = 0) + (n is a multiple of 2 for format = 16) + (n is a multiple of 4 for format = 32) + p unused, p=pad(n) +└─── +┌─── + RRCreateMode + 1 CARD8 major opcode + 1 16 RandR opcode + 2 12+(n+p)/4 length + 4 WINDOW window + 32 MODEINFO mode + n STRING8 mode name + p unused, p=pad(n) + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 0 reply length + 4 MODE mode + 20 unused +└─── +┌─── + RRDestroyMode + 1 CARD8 major opcode + 1 17 RandR opcode + 2 2 length + 4 MODE mode +└─── +┌─── + RRAddOutputMode + 1 CARD8 major opcode + 1 18 RandR opcode + 2 3 length + 4 OUTPUT output + 4 MODE mode +└─── +┌─── + RRDeleteOutputMode + 1 CARD8 major opcode + 1 19 RandR opcode + 2 3 length + 4 OUTPUT output + 4 MODE mode +└─── +┌─── + RRGetCrtcInfo + 1 CARD8 major opcode + 1 20 RandR opcode + 2 3 length + 4 CRTC crtc + 4 TIMESTAMP config-timestamp + ▶ + 1 1 Reply + 1 RRCONFIGSTATUS status + 2 CARD16 sequence number + 4 o+p reply length + 4 TIMESTATMP timestamp + 2 INT16 x + 2 INT16 y + 2 CARD16 width + 2 CARD16 height + 4 MODE mode + 2 ROTATION current rotation and reflection + 2 ROTATION set of possible rotations + 2 o number of outputs + 2 p number of possible outputs + 4o LISTofOUTPUT outputs + 4p LISTofOUTPUT possible outputs +└─── +┌─── + RRSetCrtcConfig + 1 CARD8 major opcode + 1 21 RandR opcode + 2 7+2n length + 4 CRTC crtc + 4 TIMESTAMP timestamp + 4 TIMESTAMP config timestamp + 2 INT16 x + 2 INT16 y + 4 MODE mode + 2 ROTATION rotation/reflection + 2 unused + 8n LISTofOUTPUT outputs + ▶ + 1 1 Reply + 1 RRCONFIGSTATUS status + 2 CARD16 sequence number + 4 0 reply length + 4 TIMESTAMP new timestamp + 20 unused +└─── +┌─── + RRGetCrtcGammaSize + 1 CARD8 major opcode + 1 22 RandR opcode + 2 2 length + 4 CRTC crtc + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 0 reply length + 2 CARD16 size + 22 unused +└─── +┌─── + RRGetCrtcGamma + 1 CARD8 major opcode + 1 23 RandR opcode + 2 2 length + 4 CRTC crtc + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 (6n+2)/4 reply length + 2 n size + 20 unused + 2n LISTofCARD16 red + 2n LISTofCARD16 green + 2n LISTofCARD16 blue + p unused, p=pad(6n) +└─── +┌─── + RRSetCrtcGamma + 1 CARD8 major opcode + 1 24 RandR opcode + 2 3+(6n+2)/4 length + 4 CRTC crtc + 2 n size + 2 unused + 2n LISTofCARD16 red + 2n LISTofCARD16 green + 2n LISTofCARD16 blue + p unused, p=pad(6n) +└─── + +A.2.2 Protocol Requests added with version 1.3 + +┌─── + RRGetScreenResourcesCurrent + 1 CARD8 major opcode + 1 25 RandR opcode + 2 2 length + 4 WINDOW window + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 c+o+8m+(b+p)/4 reply length + 4 TIMESTAMP timestamp + 4 TIMESTAMP config-timestamp + 2 c number of CRTCs + 2 o number of outputs + 2 m number of modeinfos + 2 b total bytes in mode names + 8 unused + 4c LISTofCRTC crtcs + 4o LISTofOUTPUT outputs + 32m LISTofMODEINFO modeinfos + b STRING8 mode names + p unused, p=pad(b) +└─── + +┌─── + RRSetCrtcTransform + 1 CARD8 major opcode + 1 26 RandR opcode + 2 12+(n+p)/4+v length + 4 CRTC crtc + 36 TRANSFORM transform + 2 CARD16 filter length + 2 unused + n STRING8 filter name + p unused, p=pad(n) + 4v FIXED filter params +└─── + +┌─── + RRGetCrtcTransform + 1 CARD8 major opcode + 1 27 RandR opcode + 2 2 length + 4 CRTC crtc + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 16+(pn+pnp)/4+(cn+cnp)/4+pf+cf reply length + 36 TRANSFORM pending transform + 1 BOOL has transforms + 3 unused + 36 TRANSFORM current transform + 4 unused + 2 pn pending filter name length + 2 pf pending filter num params + 2 cn current filter name length + 2 cf current filter num params + pn STRING8 pending filter name + pnp unused, pnp=pad(pn) + 4*pf FIXED pending filter params + cn STRING8 current filter name + cnp unused, cnp=pad(cn) + 4*cf FIXED current filter params +└─── + +┌─── + RRGetPanning + 1 CARD8 major opcode + 1 28 RandR opcode + 2 2 length + 4 CRTC crtc + ▶ + 1 1 Reply + 1 RRCONFIGSTATUS status + 2 CARD16 sequence number + 4 1 reply length + 4 TIMESTAMP timestamp + 2 CARD16 left + 2 CARD16 top + 2 CARD16 width + 2 CARD16 height + 2 CARD16 track_left + 2 CARD16 track_top + 2 CARD16 track_width + 2 CARD16 track_height + 2 INT16 border_left + 2 INT16 border_top + 2 INT16 border_right + 2 INT16 border_bottom +└─── +┌─── + RRSetPanning + 1 CARD8 major opcode + 1 29 RandR opcode + 2 9 length + 4 CRTC crtc + 4 TIMESTAMP timestamp + 2 CARD16 left + 2 CARD16 top + 2 CARD16 width + 2 CARD16 height + 2 CARD16 track_left + 2 CARD16 track_top + 2 CARD16 track_width + 2 CARD16 track_height + 2 INT16 border_left + 2 INT16 border_top + 2 INT16 border_right + 2 INT16 border_bottom + ▶ + 1 1 Reply + 1 RRCONFIGSTATUS status + 2 CARD16 sequence number + 4 0 reply length + 4 TIMESTAMP new timestamp + 20 unused +└─── + +┌─── + RRSetOutputPrimary + 1 CARD8 major opcode + 1 30 RandR opcode + 2 3 length + 4 WINDOW window + 4 OUTPUT output +└─── + +┌─── + RRGetOutputPrimary + 1 CARD8 major opcode + 1 31 RandR opcode + 2 2 length + 4 WINDOW window + ▶ + 1 1 Reply + 1 unused + 2 CARD16 sequence number + 4 CARD32 length + 4 OUTPUT output + 4 CARD32 pad1 + 4 CARD32 pad2 + 4 CARD32 pad3 + 4 CARD32 pad4 +└─── + +A.3 Protocol Events + +┌─── + RRScreenChangeNotify + 1 Base + 0 code + 1 ROTATION new rotation and reflection + 2 CARD16 sequence number + 4 TIMESTAMP timestamp + 4 TIMESTAMP configuration timestamp + 4 WINDOW root window + 4 WINDOW request window + 2 SIZEID size ID + 2 SUBPIXELORDER subpixel order defined in Render + 2 CARD16 width in pixels + 2 CARD16 height in pixels + 2 CARD16 width in millimeters + 2 CARD16 height in millimeters +└─── + +A.3.1 Protocol Events added with version 1.2 + +┌─── + RRCrtcChangeNotify + 1 Base + 1 code + 1 0 sub-code + 2 CARD16 sequence number + 4 TIMESTAMP timestamp + 4 WINDOW request window + 4 CRTC crtc affected + 4 MODE mode in use + 2 ROTATION new rotation and reflection + 2 unused + 2 INT16 x + 2 INT16 y + 2 CARD16 width + 2 CARD16 height +└─── +┌─── + RROutputChangeNotify + 1 Base + 1 code + 1 1 sub-code + 2 CARD16 sequence number + 4 TIMESTAMP timestamp + 4 TIMESTAMP configuration timestamp + 4 WINDOW request window + 4 OUTPUT output affected + 4 CRTC crtc in use + 4 MODE mode in use + 2 ROTATION rotation in use + 1 CONNECTION connection status + 1 SUBPIXELORDER subpixel order +└─── +┌─── + RROutputPropertyNotify + 1 Base + 1 code + 1 2 sub-code + 2 CARD16 sequence number + 4 WINDOW window + 4 OUTPUT output + 4 ATOM atom + 4 TIMESTAMP time + 1 state + 0 NewValue + 1 Deleted + 11 unused +└─── + +A.4 Protocol Errors + +┌─── + ERRORS + Base + 0 Output + Base + 1 Crtc + Base + 2 Mode +└─── + +Bibliography + +[RANDR] Gettys, Jim and Keith Packard, "The X Resize and Rotate + Extension - RandR", Proceedings of the 2001 USENIX Annual + Technical Conference, Boston, MA + +[RENDER] + Packard, Keith, "The X Rendering Extension", work in progress, + http://cgit.freedesktop.org/xorg/proto/renderproto/tree/renderproto.txt -- cgit v1.2.3