From ace7902333b6f61aab5a6035dbcb222763bff186 Mon Sep 17 00:00:00 2001 From: marha Date: Fri, 6 Nov 2009 06:59:46 +0000 Subject: Added libXaw-1.0.7 --- libXaw/spec/CH5.intro | 292 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 292 insertions(+) create mode 100644 libXaw/spec/CH5.intro (limited to 'libXaw/spec/CH5.intro') diff --git a/libXaw/spec/CH5.intro b/libXaw/spec/CH5.intro new file mode 100644 index 000000000..69230c0ad --- /dev/null +++ b/libXaw/spec/CH5.intro @@ -0,0 +1,292 @@ +.\" $Xorg: CH5.intro,v 1.3 2000/08/17 19:42:26 cpqbld Exp $ +.LP +.bp +\& +.sp 1 +.ce 3 +\s+1\fBChapter 5\fP\s-1 + +\s+1\fBText Widgets\fP\s-1 +.sp 2 +.nr H1 5 +.nr H2 0 +.nr H3 0 +.nr H4 0 +.nr H5 0 +.na +.LP +.XS +Chapter 5 - Text Widgets. +.XE +.LP +The Text widget provides a window that will allow an application +to display and edit one or more lines of text. Options are provided to +allow the user to add Scrollbars to its window, search for a specific +string, and modify the text in the buffer. +.LP +The Text widget is made up of a number of pieces; it was modularized to +ease customization. The AsciiText widget class (actually not limited to +ASCII but so named for compatibility) is be general enough to most +needs. If more flexibility, special features, or extra functionality is +needed, they can be added by implementing a new TextSource or TextSink, or +by subclassing the Text Widget (See Section 5.8 for customization +details.) +.LP +The words \fIinsertion point\fP are used in this chapter to refer to the text +caret. This is the symbol that is displayed between two characters in +the file. The insertion point marks the location where any new characters +will be added to the file. To avoid confusion the pointer cursor will +always be referred to as the \fIpointer\fP. +.LP +The text widget supports three edit modes, controlling the types of +modifications a user is allowed to make: +.IN "Text widget" "edit modes" +.IP \(bu 5 +Append-only +.IP \(bu 5 +Editable +.IP \(bu 5 +Read-only +.LP +Read-only mode does not allow the user or the programmer to modify the text +in the widget. While the entire string may be reset in +read-only mode with \fBXtSetValues\fP, it cannot be modified via +with \fBXawTextReplace\fP. Append-only and editable modes allow +.IN "XawTextReplace" "" +the text at the insertion point to be modified. The only difference is +that text may only be added to or removed from the end of a buffer in +append-only mode. +.LP +.NH 2 +Text Widget for Users +.IN "Text widget" "User's Guide to the Text widget" +.XS + Text Widget for Users +.XE +.LP +The Text widget provides many of the common keyboard editing commands. +These commands allow users to move around and edit the buffer. If an +illegal operation is attempted, (such as deleting characters in a +read-only text widget), the X server will beep. +.NH 3 +Default Key Bindings +.IN "Text widget" "default key bindings" +.LP +The default key bindings are patterned after those in the EMACS text editor: +.sp +.Ds 0 +.TA 1.0i 3.0i 4.5i +.ta 1.0i 3.0i 4.5i +Ctrl-a Beginning Of Line Meta-b Backward Word +Ctrl-b Backward Character Meta-f Forward Word +Ctrl-d Delete Next Character Meta-i Insert File +Ctrl-e End Of Line Meta-k Kill To End Of Paragraph +Ctrl-f Forward Character Meta-q Form Paragraph +Ctrl-g Multiply Reset Meta-v Previous Page +Ctrl-h Delete Previous Character Meta-y Insert Current Selection +Ctrl-j Newline And Indent Meta-z Scroll One Line Down +Ctrl-k Kill To End Of Line Meta-d Delete Next Word +Ctrl-l Redraw Display Meta-D Kill Word +Ctrl-m Newline Meta-h Delete Previous Word +Ctrl-n Next Line Meta-H Backward Kill Word +Ctrl-o Newline And Backup Meta-< Beginning Of File +Ctrl-p Previous Line Meta-> End Of File +Ctrl-r Search/Replace Backward Meta-] Forward Paragraph +Ctrl-s Search/Replace Forward Meta-[ Backward Paragraph +Ctrl-t Transpose Characters +Ctrl-u Multiply by 4 Meta-Delete Delete Previous Word +Ctrl-v Next Page Meta-Shift Delete Kill Previous Word +Ctrl-w Kill Selection Meta-Backspace Delete Previous Word +Ctrl-y Unkill Meta-Shift Backspace Kill Previous Word +Ctrl-z Scroll One Line Up +Ctrl-\\ Reconnect to input method +Kanji Reconnect to input method +.De +.sp +.LP +In addition, the pointer may be used to cut and paste text: +.LP +.Ds +.TA .5i 2.0i +.ta .5i 2.0i + Button 1 Down Start Selection + Button 1 Motion Adjust Selection + Button 1 Up End Selection (cut) + + Button 2 Down Insert Current Selection (paste) + + Button 3 Down Extend Current Selection + Button 3 Motion Adjust Selection + Button 3 Up End Selection (cut) + +.De +.LP +Since all of these key and pointer bindings are set through the +translations and resource manager, the user and the application +programmer can modify them by changing the Text widget's +\fBtranslations\fP resource. +.\" +.NH 3 +Search and Replace +.IN "Text widget" "search" +.IN "Text widget" "query replace" +.LP +The Text widget provides a search popup that can be used to search for a +string within the current Text widget. The popup can be activated by +typing either \fIControl-r\fP or \fIControl-s\fP. If \fIControl-s\fP is +used the search will be forward in the file from the current location of the +insertion point; if \fIControl-r\fP is used the search will be backward. The +activated popup is placed under the pointer. It has a number of buttons +that allow both text searches and text replacements to be performed. +.LP +At the top of the search popup are two toggle buttons labeled +\fIbackward\fP and \fIforward\fP. One of these buttons will always be +highlighted; this is the direction in which the search will be +performed. The user can change the direction at any time by clicking on +the appropriate button. +.LP +Directly under the buttons there are two text areas, one labeled +\fISearch for:\fP and the other labeled \fIReplace with:\fP. If this is +a read-only Text widget the \fIReplace with:\fP field will be insensitive +and no replacements will be allowed. After each of these labels will be +a text field. This field will allow the user to enter a string to +search for and the string to replace it with. Only one of these text +fields will have a window border around it; this is the active text +field. Any key presses that occur when the focus in in the search popup +will be directed to the active text field. There are also a few special +key sequences: +.DS +.TA 1.75i +.ta 1.75i +\fBCarriage Return\fP: Execute the action, and pop down the search widget. +\fBTab\fP: Execute the action, then move to the next field. +\fBShift Carriage Return\fP: Execute the action, then move to the next field. +\fBControl-q Tab\fP: Enter a Tab into a text field. +\fBControl-c\fP: Pop down the search popup. +.DE +.LP +Using these special key sequences should allow simple +searches without ever removing one's hands from the keyboard. +.LP +Near the bottom of the search popup is a row of buttons. These buttons +allow the same actions to to be performed as the key sequences, but the +buttons will leave the popup active. This can be quite useful if many +searches are being performed, as the popup will be left on the display. +Since the search popup is a transient window, it may be picked +up with the window manager and pulled off to the side for use +at a later time. +.IP \fBSearch\fP 15 +Search for the specified string. +.IP \fBReplace\fP 15 +Replace the currently highlighted string with the string in the +\fIReplace with\fP text field, and move onto the next occurrence of the +\fISearch for\fP text field. The functionality is commonly referred to as +query-replace. +.IP \fBReplace-All\fP 15 +Replace all occurrences of the search string with the replace string from +the current insertion point position to the end (or beginning) of the +file. There is no key sequence to perform this action. +.IP \fBCancel\fP 15 +Remove the search popup from the screen. +.LP +Finally, when \fBinternational\fP resource is \fBtrue\fP, there may be a +pre-edit buffer below the button row, for composing input. Its presence +is determined by the X locale in use and the VendorShell's \fBpreeditType\fP +resource. +.LP +The widget hierarchy for the search popup is show below, all widgets +are listed by class and instance name. +.sp +.nf +.ta .5i 1.0i 1.5i 2.0i 2.5i +Text + TransientShell search + Form form + Label label1 + Label label2 + Toggle backwards + Toggle forwards + Label searchLabel + Text searchText + Label replaceLabel + Text replaceText + Command search + Command replaceOne + Command replaceAll + Command cancel +.fi +.NH 3 +File Insertion +.LP +.IN "Text widget" "file insertion" +To insert a file into a text widget, type the key sequence \fIMeta-i\fP, +which will activate the file insert popup. This popup will appear under +the pointer, and any text typed while the focus is in this popup will be +redirected to the text field used for the filename. When the desired +filename has been entered, click on \fIInsert File\fP, or type +\fICarriage Return\fP. The named file will then be inserted in the text +widget beginning at the insertion point position. If an error occurs when +opening the file, an error message will be printed, prompting the user +to enter the filename again. The file insert may be aborted by clicking +on \fICancel\fP. If \fIMeta-i\fP is typed at a text widget that is +read-only, it will beep, as no file insertion is allowed. +.LP +The widget hierarchy for the file insert popup is show below; all widgets +are listed by class and instance name. +.sp +.nf +.ta .5i 1.0i 1.5i 2.0i 2.5i +Text + TransientShell insertFile + Form form + Label label + Text text + Command insert + Command cancel +.fi +.NH 3 +Text Selections for Users +.LP +.IN "Text widget" "Text Selections for Users" +The text widgets have a text selection mechanism that allows +the user to copy pieces of the text into the \fBPRIMARY\fP selection, +and paste +into the text widget some text that another application (or text +widget) has put in the \fBPRIMARY\fP selection. +.LP +One method of selecting text is to press pointer button 1 +on the beginning of the text to be selected, drag the pointer until all +of the desired text is highlighted, and then release the button to +activate the selection. Another method is to click pointer button 1 at +one end of the text to be selected, then click pointer button 3 at the +other end. +.LP +To modify a currently active selection, press pointer button 3 near +either the end of the selection that you want to +adjust. This end of the selection may be moved while holding down pointer +button 3. When the proper area has been highlighted release the pointer +button to activate the selection. +.LP +The selected text may now be pasted into another application, and +will remain active until some other client makes a selection. +To paste text that some other application has +put into the \fBPRIMARY\fP selection use pointer button 2. +First place the insertion point where you would like the text to be inserted, +then click and release pointer button 2. +.LP +Rapidly clicking pointer button 1 the following number of times will adjust +the selection as described. +.IP \fBTwo\fP 1.0i +Select the word under the pointer. A word boundary is defined by the +Text widget to be a Space, Tab, or Carriage Return. +.IP \fBThree\fP 1.0i +Select the line under the pointer. +.IP \fBFour\fP 1.0i +Select the paragraph under the pointer. A paragraph boundary is +defined by the text widget as two Carriage Returns in a row with only +Spaces or Tabs between them. +.IP \fBFive\fP 1.0i +Select the entire text buffer. +.LP +To unset the text selection, click pointer button 1 +without moving it. -- cgit v1.2.3