From fef0b61e18b9c7475e4d6e67ddfc55db46573f4e Mon Sep 17 00:00:00 2001 From: marha Date: Wed, 16 Jun 2010 16:17:11 +0000 Subject: Switched to openssl-1.0.0a --- openssl/makevms.com | 424 ++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 295 insertions(+), 129 deletions(-) (limited to 'openssl/makevms.com') diff --git a/openssl/makevms.com b/openssl/makevms.com index 3005a4583..b46e69a42 100644 --- a/openssl/makevms.com +++ b/openssl/makevms.com @@ -18,8 +18,8 @@ $! $! Specify one of the following build options for P1. $! $! ALL Just build "everything". -$! CONFIG Just build the "[.xxx.CRYPTO]OPENSSLCONF.H" file. -$! BUILDINF Just build the "[.xxx.CRYPTO]BUILDINF.H" file. +$! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file. +$! BUILDINF Just build the "[.CRYPTO._xxx]BUILDINF.H" file. $! SOFTLINKS Just fix the Unix soft links. $! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done. $! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library. @@ -35,7 +35,7 @@ $! $! P2 is ignored (it was used to denote if RSAref should be used or not, $! and is simply kept so surrounding scripts don't get confused) $! -$! Speficy DEBUG or NODEBUG as P3 to compile with or without debugging +$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging $! information. $! $! Specify which compiler as P4 to try to compile under. @@ -46,7 +46,7 @@ $! GNUC For GNU C. $! LINK To only link the programs from existing object files. $! (not yet implemented) $! -$! If you don't speficy a compiler, it will try to determine which +$! If you don't specify a compiler, it will try to determine which $! "C" compiler to use. $! $! P5, if defined, sets a TCP/IP library to use, through one of the following @@ -84,7 +84,7 @@ $ THEN $! $! The Architecture Is VAX. $! -$ ARCH := VAX +$ ARCH = "VAX" $! $! Else... $! @@ -99,6 +99,10 @@ $! End The Architecture Check. $! $ ENDIF $! +$! Get VMS version. +$! +$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM") +$! $! Check To Make Sure We Have Valid Command Line Parameters. $! $ GOSUB CHECK_OPTIONS @@ -163,32 +167,53 @@ $! Time To EXIT. $! $ GOTO TIDY $! -$! Rebuild The [.xxx.CRYPTO]OPENSSLCONF.H" file. +$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file. $! $ CONFIG: $! -$! Tell The User We Are Creating The [.xxx.CRYPTO]OPENSSLCONF.H File. +$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File. $! -$ WRITE SYS$OUTPUT "Creating [.''ARCH'.CRYPTO]OPENSSLCONF.H Include File." +$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File." $! $! First, make sure the directory exists. $! -$ IF F$PARSE("SYS$DISK:[.''ARCH'.CRYPTO]") .EQS. "" THEN - - CREATE/DIRECTORY SYS$DISK:[.'ARCH'.CRYPTO] +$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN - + CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH'] $! -$! Create The [.xxx.CRYPTO]OPENSSLCONF.H File. +$! Different tar/UnZip versions/option may have named the file differently +$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. "" +$ THEN +$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in" +$ ELSE +$ IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. "" +$ THEN +$ OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in" +$ ELSE +$ ! For ODS-5 +$ IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. "" +$ THEN +$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in" +$ ELSE +$ WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in. Exiting!" +$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found". +$ GOTO TIDY +$ ENDIF +$ ENDIF +$ ENDIF +$! +$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File. $! Make sure it has the right format. $! -$ OSCH_NAME = "SYS$DISK:[.''ARCH'.CRYPTO]OPENSSLCONF.H" +$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H" $ CREATE /FDL=SYS$INPUT: 'OSCH_NAME' RECORD FORMAT stream_lf $ OPEN /APPEND H_FILE 'OSCH_NAME' $! -$! Write The [.xxx.CRYPTO]OPENSSLCONF.H File. +$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File. $! $ WRITE H_FILE "/* This file was automatically built using makevms.com */" -$ WRITE H_FILE "/* and [.''ARCH'.CRYPTO]OPENSSLCONF.H_IN */" +$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */" $! $! Write a few macros that indicate how this system was built. $! @@ -196,75 +221,249 @@ $ WRITE H_FILE "" $ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS" $ WRITE H_FILE "# define OPENSSL_SYS_VMS" $ WRITE H_FILE "#endif" -$ CONFIG_LOGICALS := NO_ASM,NO_RSA,NO_DSA,NO_DH,NO_MD2,NO_MD5,NO_RIPEMD,WHRLPOOL,- - NO_SHA,NO_SHA0,NO_SHA1,NO_DES/NO_MDC2;NO_MDC2,NO_RC2,NO_RC4,NO_RC5,- - NO_IDEA,NO_BF,NO_CAST,NO_CAMELLIA,NO_SEED,NO_HMAC,NO_SSL2 +$ +$! One of the best way to figure out what the list should be is to do +$! the followin on a Unix system: +$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq +$! For that reason, the list will also always end up in alphabetical order +$ CONFIG_LOGICALS := AES,- + ASM,INLINE_ASM,- + BF,- + BIO,- + BUFFER,- + BUF_FREELISTS,- + CAMELLIA,- + CAST,- + CMS,- + COMP,- + DEPRECATED,- + DES,- + DGRAM,- + DH,- + DSA,- + EC,- + ECDH,- + ECDSA,- + ENGINE,- + ERR,- + EVP,- + FP_API,- + GMP,- + GOST,- + HASH_COMP,- + HMAC,- + IDEA,- + JPAKE,- + KRB5,- + LHASH,- + MD2,- + MD4,- + MD5,- + MDC2,- + OCSP,- + PSK,- + RC2,- + RC4,- + RC5,- + RFC3779,- + RIPEMD,- + RSA,- + SEED,- + SHA,- + SHA0,- + SHA1,- + SHA256,- + SHA512,- + SOCK,- + SSL2,- + STACK,- + STATIC_ENGINE,- + STDIO,- + STORE,- + TLSEXT,- + WHIRLPOOL,- + X509 +$! Add a few that we know about +$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',- + THREADS +$! The following rules, which dictate how some algorithm choices affect +$! others, are picked from Configure. +$! Quick syntax: +$! list = item[ ; list] +$! item = algos / dependents +$! algos = algo [, algos] +$! dependents = dependent [, dependents] +$! When a list of algos is specified in one item, it means that they must +$! all be disabled for the rule to apply. +$! When a list of dependents is specified in one item, it means that they +$! will all be disabled if the rule applies. +$! Rules are checked sequentially. If a rule disables an algorithm, it will +$! affect all following rules that depend on that algorithm being disabled. +$! To force something to be enabled or disabled, have no algorithms in the +$! algos part. +$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;- + DES/MDC2;- + EC/ECDSA,ECDH;- + MD5/SSL2,SSL3,TLS1;- + SHA/SSL3,TLS1;- + RSA/SSL2;- + RSA,DSA/SSL2;- + DH/SSL3,TLS1;- + TLS1/TLSEXT;- + EC/GOST;- + DSA/GOST;- + DH/GOST;- + /STATIC_ENGINE;- + /KRB5 +$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;- + /THREADS +$ +$! Architecture specific rule addtions +$ IF ARCH .EQS. "VAX" +$ THEN +$ ! Disable algorithms that require 64 bit integers in C +$ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + - + ";/GOST" + - + ";/WHIRLPOOL" +$ ENDIF +$ $ CONFIG_LOG_I = 0 -$ CONFIG_LOG_LOOP: -$ CONFIG_LOG_E1 = F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS) +$ CONFIG_LOG_LOOP1: +$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM") $ CONFIG_LOG_I = CONFIG_LOG_I + 1 -$ IF CONFIG_LOG_E1 .EQS. "" THEN GOTO CONFIG_LOG_LOOP -$ IF CONFIG_LOG_E1 .EQS. "," THEN GOTO CONFIG_LOG_LOOP_END -$ CONFIG_LOG_E2 = F$EDIT(CONFIG_LOG_E1,"TRIM") -$ CONFIG_LOG_E1 = F$ELEMENT(0,";",CONFIG_LOG_E2) -$ CONFIG_LOG_E2 = F$ELEMENT(1,";",CONFIG_LOG_E2) -$ CONFIG_LOG_E0 = F$ELEMENT(0,"/",CONFIG_LOG_E1) -$ CONFIG_LOG_E1 = F$ELEMENT(1,"/",CONFIG_LOG_E1) -$ IF F$TRNLNM("OPENSSL_"+CONFIG_LOG_E0) +$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1 +$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END +$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E) $ THEN -$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E0 -$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E0 -$ WRITE H_FILE "#endif" -$ IF CONFIG_LOG_E1 .NES. "/" +$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES +$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO +$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES +$ ELSE +$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO +$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES +$ ! Because all algorithms are assumed enabled by default +$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO +$ ENDIF +$ GOTO CONFIG_LOG_LOOP1 +$ CONFIG_LOG_LOOP1_END: +$ +$! Apply cascading disable rules +$ CONFIG_DISABLE_I = 0 +$ CONFIG_DISABLE_LOOP0: +$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM") +$ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1 +$ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0 +$ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END +$ +$ CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM") +$ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM") +$ TO_DISABLE := YES +$ CONFIG_ALGO_I = 0 +$ CONFIG_DISABLE_LOOP1: +$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM") +$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 +$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1 +$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END +$ IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. "" $ THEN -$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E1 -$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E1 -$ WRITE H_FILE "#endif" +$ TO_DISABLE := NO +$ ELSE +$ IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO $ ENDIF -$ ELSE -$ IF CONFIG_LOG_E2 .NES. ";" +$ GOTO CONFIG_DISABLE_LOOP1 +$ CONFIG_DISABLE_LOOP1_END: +$ +$ IF TO_DISABLE +$ THEN +$ CONFIG_DEPENDENT_I = 0 +$ CONFIG_DISABLE_LOOP2: +$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM") +$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 +$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2 +$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END +$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES +$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO +$ ! Better not to assume defaults at this point... +$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES +$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'" +$ GOTO CONFIG_DISABLE_LOOP2 +$ CONFIG_DISABLE_LOOP2_END: +$ ENDIF +$ GOTO CONFIG_DISABLE_LOOP0 +$ CONFIG_DISABLE_LOOP0_END: +$ +$! Apply cascading enable rules +$ CONFIG_ENABLE_I = 0 +$ CONFIG_ENABLE_LOOP0: +$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM") +$ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1 +$ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0 +$ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END +$ +$ CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM") +$ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM") +$ TO_ENABLE := YES +$ CONFIG_ALGO_I = 0 +$ CONFIG_ENABLE_LOOP1: +$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM") +$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 +$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1 +$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END +$ IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. "" $ THEN -$ IF F$TRNLNM("OPENSSL_"+CONFIG_LOG_E2) -$ THEN -$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E2 -$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E2 -$ WRITE H_FILE "#endif" -$ ENDIF +$ TO_ENABLE := NO +$ ELSE +$ IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO $ ENDIF +$ GOTO CONFIG_ENABLE_LOOP1 +$ CONFIG_ENABLE_LOOP1_END: +$ +$ IF TO_ENABLE +$ THEN +$ CONFIG_DEPENDENT_I = 0 +$ CONFIG_ENABLE_LOOP2: +$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM") +$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 +$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2 +$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END +$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO +$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES +$ ! Better not to assume defaults at this point... +$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES +$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'" +$ GOTO CONFIG_ENABLE_LOOP2 +$ CONFIG_ENABLE_LOOP2_END: $ ENDIF -$ GOTO CONFIG_LOG_LOOP -$ CONFIG_LOG_LOOP_END: -$ WRITE H_FILE "#ifndef OPENSSL_NO_STATIC_ENGINE" -$ WRITE H_FILE "# define OPENSSL_NO_STATIC_ENGINE" -$ WRITE H_FILE "#endif" -$ WRITE H_FILE "#ifndef OPENSSL_THREADS" -$ WRITE H_FILE "# define OPENSSL_THREADS" -$ WRITE H_FILE "#endif" -$ WRITE H_FILE "#ifndef OPENSSL_NO_KRB5" -$ WRITE H_FILE "# define OPENSSL_NO_KRB5" -$ WRITE H_FILE "#endif" -$ WRITE H_FILE "" -$! -$! Different tar version may have named the file differently -$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF.H_IN") .NES. "" -$ THEN -$ TYPE [.CRYPTO]OPENSSLCONF.H_IN /OUTPUT=H_FILE: -$ ELSE -$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF_H.IN") .NES. "" +$ GOTO CONFIG_ENABLE_LOOP0 +$ CONFIG_ENABLE_LOOP0_END: +$ +$! Write to the configuration +$ CONFIG_LOG_I = 0 +$ CONFIG_LOG_LOOP2: +$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM") +$ CONFIG_LOG_I = CONFIG_LOG_I + 1 +$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2 +$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END +$ IF CONFIG_CHANGED_'CONFIG_LOG_E' $ THEN -$ TYPE [.CRYPTO]OPENSSLCONF_H.IN /OUTPUT=H_FILE: -$ ELSE -$ ! For ODS-5 -$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF.H.IN") .NES. "" +$ IF CONFIG_DISABLED_'CONFIG_LOG_E' $ THEN -$ TYPE [.CRYPTO]OPENSSLCONF.H.IN /OUTPUT=H_FILE: +$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E +$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E +$ WRITE H_FILE "#endif" $ ELSE -$ WRITE SYS$ERROR "Couldn't find a [.CRYPTO]OPENSSLCONF.H_IN. Exiting!" -$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found". -$ GOTO TIDY +$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E +$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E +$ WRITE H_FILE "#endif" $ ENDIF $ ENDIF -$ ENDIF +$ GOTO CONFIG_LOG_LOOP2 +$ CONFIG_LOG_LOOP2_END: +$! +$! Add in the common "crypto/opensslconf.h.in". +$! +$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE: +$! $ IF ARCH .NES. "VAX" $ THEN $! @@ -347,29 +546,29 @@ $! End $! $ ENDIF $! -$! Close the [.xxx.CRYPTO]OPENSSLCONF.H file +$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file $! $ CLOSE H_FILE $! -$! Purge The [.xxx.CRYPTO]OPENSSLCONF.H file +$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file $! -$ PURGE SYS$DISK:[.'ARCH'.CRYPTO]OPENSSLCONF.H +$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H $! $! That's All, Time To RETURN. $! $ RETURN $! -$! Rebuild The "[.xxx.CRYPTO]BUILDINF.H" file. +$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file. $! $ BUILDINF: $! -$! Tell The User We Are Creating The [.xxx.CRYPTO]BUILDINF.H File. +$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File. $! -$ WRITE SYS$OUTPUT "Creating [.''ARCH'.CRYPTO]BUILDINF.H Include File." +$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File." $! -$! Create The [.xxx.CRYPTO]BUILDINF.H File. +$! Create The [.CRYPTO._xxx]BUILDINF.H File. $! -$ BIH_NAME = "SYS$DISK:[.''ARCH'.CRYPTO]BUILDINF.H" +$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H" $ CREATE /FDL=SYS$INPUT: 'BIH_NAME' RECORD FORMAT stream_lf @@ -380,19 +579,19 @@ $! Get The Current Date & Time. $! $ TIME = F$TIME() $! -$! Write The [.xxx.CRYPTO]BUILDINF.H File. +$! Write The [.CRYPTO._xxx]BUILDINF.H File. $! $ WRITE H_FILE "#define CFLAGS """" /* Not filled in for now */" -$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VER'""" +$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'""" $ WRITE H_FILE "#define DATE ""''TIME'"" " $! -$! Close The [.xxx.CRYPTO]BUILDINF.H File. +$! Close The [.CRYPTO._xxx]BUILDINF.H File. $! $ CLOSE H_FILE $! -$! Purge The [.xxx.CRYPTO]BUILDINF.H File. +$! Purge The [.CRYPTO._xxx]BUILDINF.H File. $! -$ PURGE SYS$DISK:[.'ARCH'.CRYPTO]BUILDINF.H +$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H $! $! That's All, Time To RETURN. $! @@ -404,42 +603,14 @@ $ SOFTLINKS: $! $! Tell The User We Are Partly Rebuilding The [.APPS] Directory. $! -$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files." +$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File." $! -$ DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;* +$ DELETE SYS$DISK:[.APPS]MD4.C;* $! $! Copy MD4.C from [.CRYPTO.MD4] into [.APPS] $! $ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS] $! -$! Copy MD5.C from [.CRYPTO.MD5] into [.APPS] -$! -$ COPY SYS$DISK:[.CRYPTO.MD5]MD5.C SYS$DISK:[.APPS] -$! -$! Copy RMD160.C from [.CRYPTO.RIPEMD] into [.APPS] -$! -$ COPY SYS$DISK:[.CRYPTO.RIPEMD]RMD160.C SYS$DISK:[.APPS] -$! -$! Tell The User We Are Partly Rebuilding The [.TEST] Directory. -$! -$ WRITE SYS$OUTPUT "Rebuilding The '[.TEST]*.C' Files." -$! -$! First, We Have To "Rebuild" The "[.TEST]" Directory, So Delete -$! All The "C" Files That Are Currently There Now. -$! -$ DELETE SYS$DISK:[.TEST]*.C;* -$ DELETE SYS$DISK:[.TEST]EVPTESTS.TXT;* -$! -$! Copy all the *TEST.C files from [.CRYPTO...] into [.TEST] -$! -$ COPY SYS$DISK:[.CRYPTO.*]%*TEST.C SYS$DISK:[.TEST] -$ COPY SYS$DISK:[.CRYPTO.SHA]SHA%%%T.C SYS$DISK:[.TEST] -$ COPY SYS$DISK:[.CRYPTO.EVP]EVPTESTS.TXT SYS$DISK:[.TEST] -$! -$! Copy all the *TEST.C files from [.SSL...] into [.TEST] -$! -$ COPY SYS$DISK:[.SSL]%*TEST.C SYS$DISK:[.TEST] -$! $! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory. $! $ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory." @@ -532,12 +703,7 @@ $ IF D .EQS. "" $ THEN $ COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG $ ELSE -$ IF D .EQS. "_''ARCH'" -$ THEN -$ COPY [.'ARCH'.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG -$ ELSE -$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG -$ ENDIF +$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG $ ENDIF $ GOTO LOOP_SDIRS $ LOOP_SDIRS_END: @@ -736,7 +902,7 @@ $! Else... $! $ ELSE $! -$! Else, Check To See If P1 Has A Valid Arguement. +$! Else, Check To See If P1 Has A Valid Argument. $! $ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") - .OR.(P1.EQS."BUILDALL") - @@ -745,7 +911,7 @@ $ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") - .OR.(P1.EQS."ENGINES") $ THEN $! -$! A Valid Arguement. +$! A Valid Argument. $! $ BUILDCOMMAND = P1 $! @@ -758,13 +924,13 @@ $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [not-used option] [Debug option] " $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG " +$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL NORSAREF NODEBUG " $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " ALL : Just Build Everything." -$ WRITE SYS$OUTPUT " CONFIG : Just build the [.xxx.CRYPTO]OPENSSLCONF.H file." -$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.xxx.CRYPTO]BUILDINF.H file." +$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO._xxx]OPENSSLCONF.H file." +$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO._xxx]BUILDINF.H file." $ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links." $ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done." $ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." @@ -834,7 +1000,7 @@ $! Time To EXIT. $! $ GOTO TIDY $! -$! End The Valid Arguement Check. +$! End The Valid Argument Check. $! $ ENDIF $! @@ -973,7 +1139,7 @@ $! End The GNU C Check. $! $ ENDIF $! -$! Else The User Entered An Invalid Arguement. +$! Else The User Entered An Invalid Argument. $! $ ELSE $! @@ -991,7 +1157,7 @@ $! Time To EXIT. $! $ GOTO TIDY $! -$! End The Valid Arguement Check. +$! End The Valid Argument Check. $! $ ENDIF $! @@ -1098,7 +1264,7 @@ $! Print info $! $ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB $! -$! Else The User Entered An Invalid Arguement. +$! Else The User Entered An Invalid Argument. $! $ ELSE $ IF P5 .NES. "" @@ -1153,7 +1319,7 @@ $! $! Get The Version Of VMS We Are Using. $! $ ISSEVEN := -$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) +$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION)) $ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) $! $! Check To See If The VMS Version Is v7.1 Or Later. -- cgit v1.2.3