From f7025b4baa1ba35ee796785641f04eac5bedb0a6 Mon Sep 17 00:00:00 2001 From: marha Date: Wed, 5 Oct 2011 17:37:34 +0200 Subject: mkfontscale pixman xserver xtrans libX11 libXdmcp libxcb libXmu mesa git update 5 oct 2011 --- xorg-server/doc/dtrace/Xserver-DTrace.xml | 1156 ++++++++++++++--------------- 1 file changed, 578 insertions(+), 578 deletions(-) (limited to 'xorg-server/doc/dtrace') diff --git a/xorg-server/doc/dtrace/Xserver-DTrace.xml b/xorg-server/doc/dtrace/Xserver-DTrace.xml index 72b8f4fa6..fa8bc809a 100644 --- a/xorg-server/doc/dtrace/Xserver-DTrace.xml +++ b/xorg-server/doc/dtrace/Xserver-DTrace.xml @@ -1,578 +1,578 @@ - - %defs; -]> - -
- - Xserver provider for DTrace - - AlanCoopersmith - - Oracle Corporation - Solaris Engineering - - - X.Org Xserver version &xserver.version; - - -Copyright (c) 2005, 2006, 2007, 2010, Oracle and/or its affiliates. -All rights reserved. - -Permission is hereby granted, free of charge, to any person obtaining a -copy of this software and associated documentation files (the "Software"), -to deal in the Software without restriction, including without limitation -the rights to use, copy, modify, merge, publish, distribute, sublicense, -and/or sell copies of the Software, and to permit persons to whom the -Software is furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice (including the next -paragraph) shall be included in all copies or substantial portions of the -Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER -DEALINGS IN THE SOFTWARE. - - - - - - Introduction - - This page provides details on a - statically defined user application tracing provider - for the - DTrace - facility in Solaris 10, - MacOS X 10.5, and later releases. This - provider instruments various points in the X server, to allow - tracing what client applications are up to. - - - - The provider was integrated into the X.Org git master repository - with Solaris 10 & OpenSolaris support for the Xserver 1.4 release, - released in 2007 with X11R7.3. Support for DTrace on MacOS X - was added in Xserver 1.7. - - - - These probes expose the request and reply structure of the X protocol - between clients and the X server, so an understanding of that basic - nature will aid in learning how to use these probes. - - - - - Available probes - - - Due to the way User-Defined DTrace probes work, arguments to - these probes all bear undistinguished names of - arg0, arg1, - arg2, etc. These tables should help you - determine what the real data is for each of the probe arguments. - - - Probes and their arguments - - - - - - - - - - - - Probe name - Description - arg0 - arg1 - arg2 - arg3 - arg4 - - - - - Request Probes - - - request-start - Called just before processing each client request. - requestName - requestCode - requestLength - clientId - requestBuffer - - - request-done - Called just after processing each client request. - requestName - requestCode - sequenceNumber - clientId - resultCode - - - Event Probes - - - send-event - Called just before send each event to a client. - clientId - eventCode - eventBuffer - - - - Client Connection Probes - - - client-connect - Called when a new connection is opened from a client - clientId - clientFD - - - - client-auth - Called when client authenticates (normally just after connection opened) - clientId - clientAddr - clientPid - clientZoneId - - - - client-disconnect - Called when a client connection is closed - clientId - - - - Resource Allocation Probes - - - resource-alloc - Called when a new resource (pixmap, gc, colormap, etc.) is allocated - resourceId - resourceTypeId - resourceValue - resourceTypeName - - - - resource-free - Called when a resource is freed - resourceId - resourceTypeId - resourceValue - resourceTypeName - - - - -
- - - - - Data Available in Probe Arguments - - - To access data in arguments of type string, you will need - to use copyinstr(). - To access data buffers referenced via uintptr_t's, you will - need to use copyin(). - - - Probe Arguments - - - - - - - Argument name - Type - Description - - - - - clientAddr - string - String representing address client connected from - - - clientFD - int - X server's file descriptor for server side of each connection - - - clientId - int - Unique integer identifier for each connection to the - X server - - - clientPid - pid_t - Process id of client, if connection is local - (from getpeerucred()) - - - clientZoneId - zoneid_t - Solaris: Zone id of client, if connection is local - (from getpeerucred()) - - - eventBuffer - uintptr_t - Pointer to buffer containing X event - decode using - structures in - <X11/Xproto.h> - and similar headers for each extension - - - eventCode - uint8_t - Event number of X event - - - resourceId - uint32_t - X resource id (XID) - - - resourceTypeId - uint32_t - Resource type id - - - resourceTypeName - string - String representing X resource type - ("PIXMAP", etc.) - - - resourceValue - uintptr_t - Pointer to data for X resource - - - resultCode - int - Integer code representing result status of request - - - requestBuffer - uintptr_t - Pointer to buffer containing X request - decode using - structures in - <X11/Xproto.h> - and similar headers for each extension - - - requestCode - uint8_t - Request number of X request or Extension - - - requestName - string - Name of X request or Extension - - - requestLength - uint16_t - Length of X request - - - sequenceNumber - uint32_t - Number of X request in in this connection - - - -
- - - - - Examples - - - Counting requests by request name - - - This script simply increments a counter for each different request - made, and when you exit the script (such as by hitting - ControlC - ) prints the counts. - - -#!/usr/sbin/dtrace -s - -Xserver*:::request-start -{ - @counts[copyinstr(arg0)] = count(); -} - - - The output from a short run may appear as: - - QueryPointer 1 - CreatePixmap 2 - FreePixmap 2 - PutImage 2 - ChangeGC 10 - CopyArea 10 - CreateGC 14 - FreeGC 14 - RENDER 28 - SetClipRectangles 40 - - - - - This can be rewritten slightly to cache the string containing the name - of the request since it will be reused many times, instead of copying - it over and over from the kernel: - - -#!/usr/sbin/dtrace -s - -string Xrequest[uintptr_t]; - -Xserver*:::request-start -/Xrequest[arg0] == ""/ -{ - Xrequest[arg0] = copyinstr(arg0); -} - -Xserver*:::request-start -{ - @counts[Xrequest[arg0]] = count(); -} - - - - - - Get average CPU time per request - - This script records the CPU time used between the probes at - the start and end of each request and aggregates it per request type. - - -#!/usr/sbin/dtrace -s - -Xserver*:::request-start -{ - reqstart = vtimestamp; -} - -Xserver*:::request-done -{ - @times[copyinstr(arg0)] = avg(vtimestamp - reqstart); -} - - - The output from a sample run might look like: - - - ChangeGC 889 - MapWindow 907 - SetClipRectangles 1319 - PolyPoint 1413 - PolySegment 1434 - PolyRectangle 1828 - FreeCursor 1895 - FreeGC 1950 - CreateGC 2244 - FreePixmap 2246 - GetInputFocus 2249 - TranslateCoords 8508 - QueryTree 8846 - GetGeometry 9948 - CreatePixmap 12111 - AllowEvents 14090 - GrabServer 14791 - MIT-SCREEN-SAVER 16747 - ConfigureWindow 22917 - SetInputFocus 28521 - PutImage 240841 - - - - - - - Monitoring clients that connect and disconnect - - - This script simply prints information about each client that - connects or disconnects from the server while it is running. - Since the provider is specified as Xserver$1 instead - of Xserver* like previous examples, it won't monitor - all Xserver processes running on the machine, but instead expects - the process id of the X server to monitor to be specified as the - argument to the script. - - -#!/usr/sbin/dtrace -s - -Xserver$1:::client-connect -{ - printf("** Client Connect: id %d\n", arg0); -} - -Xserver$1:::client-auth -{ - printf("** Client auth'ed: id %d => %s pid %d\n", - arg0, copyinstr(arg1), arg2); -} - -Xserver$1:::client-disconnect -{ - printf("** Client Disconnect: id %d\n", arg0); -} - - - A sample run: - - -# ./foo.d 5790 -dtrace: script './foo.d' matched 4 probes -CPU ID FUNCTION:NAME - 0 15774 CloseDownClient:client-disconnect ** Client Disconnect: id 65 - - 2 15774 CloseDownClient:client-disconnect ** Client Disconnect: id 64 - - 0 15773 EstablishNewConnections:client-connect ** Client Connect: id 64 - - 0 15772 AuthAudit:client-auth ** Client auth'ed: id 64 => local host pid 2034 - - 0 15773 EstablishNewConnections:client-connect ** Client Connect: id 65 - - 0 15772 AuthAudit:client-auth ** Client auth'ed: id 65 => local host pid 2034 - - 0 15774 CloseDownClient:client-disconnect ** Client Disconnect: id 64 - - - - - - - - Monitoring clients creating Pixmaps - - - This script can be used to determine which clients are creating - pixmaps in the X server, printing information about each client - as it connects to help trace it back to the program on the other - end of the X connection. - - -#!/usr/sbin/dtrace -qs - -string Xrequest[uintptr_t]; -string Xrestype[uintptr_t]; - -Xserver$1:::request-start -/Xrequest[arg0] == ""/ -{ - Xrequest[arg0] = copyinstr(arg0); -} - -Xserver$1:::resource-alloc -/arg3 != 0 && Xrestype[arg3] == ""/ -{ - Xrestype[arg3] = copyinstr(arg3); -} - - -Xserver$1:::request-start -/Xrequest[arg0] == "X_CreatePixmap"/ -{ - printf("-> %s: client %d\n", Xrequest[arg0], arg3); -} - -Xserver$1:::request-done -/Xrequest[arg0] == "X_CreatePixmap"/ -{ - printf("<- %s: client %d\n", Xrequest[arg0], arg3); -} - -Xserver$1:::resource-alloc -/Xrestype[arg3] == "PIXMAP"/ -{ - printf("** Pixmap alloc: %08x\n", arg0); -} - - -Xserver$1:::resource-free -/Xrestype[arg3] == "PIXMAP"/ -{ - printf("** Pixmap free: %08x\n", arg0); -} - -Xserver$1:::client-connect -{ - printf("** Client Connect: id %d\n", arg0); -} - -Xserver$1:::client-auth -{ - printf("** Client auth'ed: id %d => %s pid %d\n", - arg0, copyinstr(arg1), arg2); -} - -Xserver$1:::client-disconnect -{ - printf("** Client Disconnect: id %d\n", arg0); -} - - - Sample output from a run of this script: - -** Client Connect: id 17 -** Client auth'ed: id 17 => local host pid 20273 --> X_CreatePixmap: client 17 -** Pixmap alloc: 02200009 -<- X_CreatePixmap: client 17 --> X_CreatePixmap: client 15 -** Pixmap alloc: 01e00180 -<- X_CreatePixmap: client 15 --> X_CreatePixmap: client 15 -** Pixmap alloc: 01e00181 -<- X_CreatePixmap: client 15 --> X_CreatePixmap: client 14 -** Pixmap alloc: 01c004c8 -<- X_CreatePixmap: client 14 -** Pixmap free: 02200009 -** Client Disconnect: id 17 -** Pixmap free: 01e00180 -** Pixmap free: 01e00181 - - - - - - - - - -
+ + %defs; +]> + +
+ + Xserver Provider for DTrace + + AlanCoopersmith + + Oracle Corporation + Solaris Engineering + + + X.Org Xserver version &xserver.version; + 2005200620072010 + Oracle and/or its affiliates. All rights reserved. + + + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice (including the next +paragraph) shall be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. + + + + + + Introduction + + This page provides details on a + statically defined user application tracing provider + for the + DTrace + facility in Solaris 10, + MacOS X 10.5, and later releases. This + provider instruments various points in the X server, to allow + tracing what client applications are up to. + + + + The provider was integrated into the X.Org git master repository + with Solaris 10 & OpenSolaris support for the Xserver 1.4 release, + released in 2007 with X11R7.3. Support for DTrace on MacOS X + was added in Xserver 1.7. + + + + These probes expose the request and reply structure of the X protocol + between clients and the X server, so an understanding of that basic + nature will aid in learning how to use these probes. + + + + + Available probes + + + Due to the way User-Defined DTrace probes work, arguments to + these probes all bear undistinguished names of + arg0, arg1, + arg2, etc. These tables should help you + determine what the real data is for each of the probe arguments. + + + Probes and their arguments + + + + + + + + + + + + Probe name + Description + arg0 + arg1 + arg2 + arg3 + arg4 + + + + + Request Probes + + + request-start + Called just before processing each client request. + requestName + requestCode + requestLength + clientId + requestBuffer + + + request-done + Called just after processing each client request. + requestName + requestCode + sequenceNumber + clientId + resultCode + + + Event Probes + + + send-event + Called just before send each event to a client. + clientId + eventCode + eventBuffer + + + + Client Connection Probes + + + client-connect + Called when a new connection is opened from a client + clientId + clientFD + + + + client-auth + Called when client authenticates (normally just after connection opened) + clientId + clientAddr + clientPid + clientZoneId + + + + client-disconnect + Called when a client connection is closed + clientId + + + + Resource Allocation Probes + + + resource-alloc + Called when a new resource (pixmap, gc, colormap, etc.) is allocated + resourceId + resourceTypeId + resourceValue + resourceTypeName + + + + resource-free + Called when a resource is freed + resourceId + resourceTypeId + resourceValue + resourceTypeName + + + + +
+ + + + + Data Available in Probe Arguments + + + To access data in arguments of type string, you will need + to use copyinstr(). + To access data buffers referenced via uintptr_t's, you will + need to use copyin(). + + + Probe Arguments + + + + + + + Argument name + Type + Description + + + + + clientAddr + string + String representing address client connected from + + + clientFD + int + X server's file descriptor for server side of each connection + + + clientId + int + Unique integer identifier for each connection to the + X server + + + clientPid + pid_t + Process id of client, if connection is local + (from getpeerucred()) + + + clientZoneId + zoneid_t + Solaris: Zone id of client, if connection is local + (from getpeerucred()) + + + eventBuffer + uintptr_t + Pointer to buffer containing X event - decode using + structures in + <X11/Xproto.h> + and similar headers for each extension + + + eventCode + uint8_t + Event number of X event + + + resourceId + uint32_t + X resource id (XID) + + + resourceTypeId + uint32_t + Resource type id + + + resourceTypeName + string + String representing X resource type + ("PIXMAP", etc.) + + + resourceValue + uintptr_t + Pointer to data for X resource + + + resultCode + int + Integer code representing result status of request + + + requestBuffer + uintptr_t + Pointer to buffer containing X request - decode using + structures in + <X11/Xproto.h> + and similar headers for each extension + + + requestCode + uint8_t + Request number of X request or Extension + + + requestName + string + Name of X request or Extension + + + requestLength + uint16_t + Length of X request + + + sequenceNumber + uint32_t + Number of X request in in this connection + + + +
+ + + + + Examples + + + Counting requests by request name + + + This script simply increments a counter for each different request + made, and when you exit the script (such as by hitting + ControlC + ) prints the counts. + + +#!/usr/sbin/dtrace -s + +Xserver*:::request-start +{ + @counts[copyinstr(arg0)] = count(); +} + + + The output from a short run may appear as: + + QueryPointer 1 + CreatePixmap 2 + FreePixmap 2 + PutImage 2 + ChangeGC 10 + CopyArea 10 + CreateGC 14 + FreeGC 14 + RENDER 28 + SetClipRectangles 40 + + + + + This can be rewritten slightly to cache the string containing the name + of the request since it will be reused many times, instead of copying + it over and over from the kernel: + + +#!/usr/sbin/dtrace -s + +string Xrequest[uintptr_t]; + +Xserver*:::request-start +/Xrequest[arg0] == ""/ +{ + Xrequest[arg0] = copyinstr(arg0); +} + +Xserver*:::request-start +{ + @counts[Xrequest[arg0]] = count(); +} + + + + + + Get average CPU time per request + + This script records the CPU time used between the probes at + the start and end of each request and aggregates it per request type. + + +#!/usr/sbin/dtrace -s + +Xserver*:::request-start +{ + reqstart = vtimestamp; +} + +Xserver*:::request-done +{ + @times[copyinstr(arg0)] = avg(vtimestamp - reqstart); +} + + + The output from a sample run might look like: + + + ChangeGC 889 + MapWindow 907 + SetClipRectangles 1319 + PolyPoint 1413 + PolySegment 1434 + PolyRectangle 1828 + FreeCursor 1895 + FreeGC 1950 + CreateGC 2244 + FreePixmap 2246 + GetInputFocus 2249 + TranslateCoords 8508 + QueryTree 8846 + GetGeometry 9948 + CreatePixmap 12111 + AllowEvents 14090 + GrabServer 14791 + MIT-SCREEN-SAVER 16747 + ConfigureWindow 22917 + SetInputFocus 28521 + PutImage 240841 + + + + + + + Monitoring clients that connect and disconnect + + + This script simply prints information about each client that + connects or disconnects from the server while it is running. + Since the provider is specified as Xserver$1 instead + of Xserver* like previous examples, it won't monitor + all Xserver processes running on the machine, but instead expects + the process id of the X server to monitor to be specified as the + argument to the script. + + +#!/usr/sbin/dtrace -s + +Xserver$1:::client-connect +{ + printf("** Client Connect: id %d\n", arg0); +} + +Xserver$1:::client-auth +{ + printf("** Client auth'ed: id %d => %s pid %d\n", + arg0, copyinstr(arg1), arg2); +} + +Xserver$1:::client-disconnect +{ + printf("** Client Disconnect: id %d\n", arg0); +} + + + A sample run: + + +# ./foo.d 5790 +dtrace: script './foo.d' matched 4 probes +CPU ID FUNCTION:NAME + 0 15774 CloseDownClient:client-disconnect ** Client Disconnect: id 65 + + 2 15774 CloseDownClient:client-disconnect ** Client Disconnect: id 64 + + 0 15773 EstablishNewConnections:client-connect ** Client Connect: id 64 + + 0 15772 AuthAudit:client-auth ** Client auth'ed: id 64 => local host pid 2034 + + 0 15773 EstablishNewConnections:client-connect ** Client Connect: id 65 + + 0 15772 AuthAudit:client-auth ** Client auth'ed: id 65 => local host pid 2034 + + 0 15774 CloseDownClient:client-disconnect ** Client Disconnect: id 64 + + + + + + + + Monitoring clients creating Pixmaps + + + This script can be used to determine which clients are creating + pixmaps in the X server, printing information about each client + as it connects to help trace it back to the program on the other + end of the X connection. + + +#!/usr/sbin/dtrace -qs + +string Xrequest[uintptr_t]; +string Xrestype[uintptr_t]; + +Xserver$1:::request-start +/Xrequest[arg0] == ""/ +{ + Xrequest[arg0] = copyinstr(arg0); +} + +Xserver$1:::resource-alloc +/arg3 != 0 && Xrestype[arg3] == ""/ +{ + Xrestype[arg3] = copyinstr(arg3); +} + + +Xserver$1:::request-start +/Xrequest[arg0] == "X_CreatePixmap"/ +{ + printf("-> %s: client %d\n", Xrequest[arg0], arg3); +} + +Xserver$1:::request-done +/Xrequest[arg0] == "X_CreatePixmap"/ +{ + printf("<- %s: client %d\n", Xrequest[arg0], arg3); +} + +Xserver$1:::resource-alloc +/Xrestype[arg3] == "PIXMAP"/ +{ + printf("** Pixmap alloc: %08x\n", arg0); +} + + +Xserver$1:::resource-free +/Xrestype[arg3] == "PIXMAP"/ +{ + printf("** Pixmap free: %08x\n", arg0); +} + +Xserver$1:::client-connect +{ + printf("** Client Connect: id %d\n", arg0); +} + +Xserver$1:::client-auth +{ + printf("** Client auth'ed: id %d => %s pid %d\n", + arg0, copyinstr(arg1), arg2); +} + +Xserver$1:::client-disconnect +{ + printf("** Client Disconnect: id %d\n", arg0); +} + + + Sample output from a run of this script: + +** Client Connect: id 17 +** Client auth'ed: id 17 => local host pid 20273 +-> X_CreatePixmap: client 17 +** Pixmap alloc: 02200009 +<- X_CreatePixmap: client 17 +-> X_CreatePixmap: client 15 +** Pixmap alloc: 01e00180 +<- X_CreatePixmap: client 15 +-> X_CreatePixmap: client 15 +** Pixmap alloc: 01e00181 +<- X_CreatePixmap: client 15 +-> X_CreatePixmap: client 14 +** Pixmap alloc: 01c004c8 +<- X_CreatePixmap: client 14 +** Pixmap free: 02200009 +** Client Disconnect: id 17 +** Pixmap free: 01e00180 +** Pixmap free: 01e00181 + + + + + + + + + +
-- cgit v1.2.3