From a13b75f056f9f9efcf6ecb8610b40ddbbb2bbb69 Mon Sep 17 00:00:00 2001 From: marha Date: Wed, 19 Jan 2011 17:29:52 +0000 Subject: xserver pixman mesa git update 19 jan 2011 --- xorg-server/hw/dmx/man/Xdmx.man | 741 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 741 insertions(+) create mode 100644 xorg-server/hw/dmx/man/Xdmx.man (limited to 'xorg-server/hw/dmx/man/Xdmx.man') diff --git a/xorg-server/hw/dmx/man/Xdmx.man b/xorg-server/hw/dmx/man/Xdmx.man new file mode 100644 index 000000000..9c8bdea00 --- /dev/null +++ b/xorg-server/hw/dmx/man/Xdmx.man @@ -0,0 +1,741 @@ +.\" $XFree86$ +.\" +.\" Copyright 2001-2004 Red Hat Inc., Durham, North Carolina. +.\" All Rights Reserved. +.\" +.\" Permission is hereby granted, free of charge, to any person obtaining +.\" a copy of this software and associated documentation files (the +.\" "Software"), to deal in the Software without restriction, including +.\" without limitation on the rights to use, copy, modify, merge, +.\" publish, distribute, sublicense, and/or sell copies of the Software, +.\" and to permit persons to whom the Software is furnished to do so, +.\" subject to the following conditions: +.\" +.\" he above copyright notice and this permission notice (including the +.\" next paragraph) shall be included in all copies or substantial +.\" portions of the Software. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +.\" NON-INFRINGEMENT. IN NO EVENT SHALL RED HAT AND/OR THEIR SUPPLIERS +.\" BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +.\" ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +.\" CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +.\" SOFTWARE. +.TH Xdmx 1 __vendorversion__ +.SH NAME +Xdmx - Distributed Multi-head X server +.SH SYNOPSIS +.B Xdmx +[:display] [option ...] +.SH DESCRIPTION +.I Xdmx +is a proxy X server that uses one or more other X servers as its display +devices. It provides multi-head X functionality for displays that might +be located on different machines. +.I Xdmx +functions as a front-end X server that acts as a proxy to a set of +back-end X servers. All of the visible rendering is passed to the +back-end X servers. Clients connect to the +.I Xdmx +front-end, and everything appears as it would in a regular multi-head +configuration. If Xinerama is enabled (e.g., with +.B +xinerama +on the command line), the clients see a single large screen. +.PP +.I Xdmx +communicates to the back-end X servers using the standard X11 protocol, +and standard and/or commonly available X server extensions. +.SH OPTIONS +In addition to the normal X server options described in the +.I Xserver(1) +manual page, +.I Xdmx +accepts the following command line switches: +.TP 8 +.BI "\-display " display-name +This specifies the name(s) of the back-end X server display(s) to connect +to. This option may be specified multiple times to connect to more than +one back-end display. The first is used as screen 0, the second as screen 1, +etc. If this option is omitted, the +.B $DISPLAY +environment variable is used as the single back-end X server display. +.sp +.TP 8 +.BI "\-xinput " input-source +This specifies the source to use for XInput extension devices. The +choices are the same as for +.BR "\-input " , +described below, except that core devices on backend servers cannot be +treated as XInput extension devices. (Although extension devices on +backend and console servers are supported as extension devices under +.IR Xdmx ). +.sp +.TP 8 +.BI "\-input " input-source +This specifies the source to use for the core input devices. The choices are: +.RS +.TP 4 +.B dummy +A set of dummy core input drivers are used. These never generate any +input events. +.sp +.TP 4 +.B local +The raw keyboard and pointer from the local computer are used. A +comma-separated list of driver names can be appended. For example, to +select the example Linux keyboard and PS/2 mouse driver use: +.BR "-input local,kbd,ps2" . +The following drivers have been implemented for Linux: kbd, ms (a +two-button Microsoft mouse driver), ps2 (a PS/2 mouse driver), usb-mou +(a USB mouse driver), usb-kbd (a USB keyboard driver), and usb-oth (a +USB non-keyboard, non-mouse driver). Additional drivers may be +implemented in the future. Appropriate defaults will be used if no +comma-separated list is provided. +.sp +.TP 4 +.I display-name +If the display-name is a back-end server, then core input events are +taken from the server specified. Otherwise, a console window will be +opened on the specified display. +.sp +If the +.I display-name +is followed by ",xi" then XInput extension devices on the display will +be used as +.I Xdmx +XInput extension devices. If the +.I display-name +is followed by ",noxi" then XInput extension devices on the display will +.B not +be used as +.I Xdmx +XInput extension devices. Currently, the default is ",xi". +.sp +If the +.I display-name +is followed by ",console" and the +.I display-name +refers to a display that is used as a backend display, then a console +window will be opened on that display +.B and +that display will be treated as a backend display. Otherwise (or if +",noconsole" is used), the display will be treated purely as a backend +or a console display, as described above. +.sp +If the +.I display-name +is followed by ",windows", then outlines of the windows on the backend +will be displayed inside the console window. Otherwise (or if +",nowindows" is used), the console window will not display the outlines +of backend windows. (This option only applies to console input.) +.sp +If the +.I display-name +is followed by ",xkb", then the next 1 to 3 comma-separated parameters +will specify the keycodes, symbols, and geometry of the keyboard for +this input device. For example, ",xkb,xfree86,pc104" will specify that +the "xfree86" keycodes and the "pc104" symbols should be used to +initialize the keyboard. For an SGI keyboard, ",xkb,sgi/indy(pc102)" +might be useful. A list of keycodes, symbols, and geometries can be +found in +.IR /usr/X11R6/lib/X11/xkb . +If this option is not specified, the input device will be queried, +perhaps using the XKEYBOARD extension. +.RE +.sp +.RS +If this option isn't specified, the default input source is the first +back-end server (the one used for screen 0). The console window shows +the layout of the back-end display(s) and pointer movements and key +presses within the console window will be used as core input devices. +.sp +Several special function keys are active, depending on the input +source: +.sp +.RS +.B Ctrl-Alt-q +will terminate the +.I Xdmx +server in all modes. +.sp +.B Ctrl-Alt-g +will toggle a +server grab in console mode (a special cursor, currently a spider, is +used to indicate an active server grab). +.sp +.B Ctrl-Alt-f +will toggle fine-grain motion in console mode (a special cursor, +currently a cross hair, is used to indicate this mode). If this mode is +combined with a server grab, then the cursor will have 4 lines instead +of only 2. +.sp +.BR Ctrl-Alt-F1 " through " Ctrl-Alt-F12 +will switch to another VC in local (raw) mode. +.RE +.RE +.sp +.TP 8 +.BI "-shadowfb" +This option turns on (legacy) support for the shadow frame buffer. +.sp +.TP 8 +.BI "-noshadowfb" +This option turns off (legacy) support for the shadow frame buffer. +Note that this option has been deprecated and will be removed in the +next release. +.sp +.TP 8 +.BI "-nomulticursor" +This option turns off support for displaying multiple cursors on +overlapped back-end displays. This option is available for testing and +benchmarking purposes. +.sp +.TP 8 +.BI "-fontpath" +This option sets the +.I Xdmx +server's default font path. This option can be specified multiple times +to accommodate multiple font paths. See the +.B "FONT PATHS" +section below for very important information regarding setting the +default font path. +.sp +.TP 8 +.BI "-configfile " filename +Specify the configuration file that should be read. Note that if the +.B \-display +command-line option is used, then the configuration file will be +ignored. +.sp +.TP 8 +.BI "-config " name +Specify a configuration to use. The +.I name +will be the name following the +.B virtual +keyword in the configuration file. +.sp +.TP 8 +.BI "-stat " "interval screens" +This option enables the display of performance statistics. The interval +is in seconds. The screens is a count of the number of back-end screens +for which data is printed each interval. Specifying 0 for screens will +display data for all screens. +.sp +For each screen, the following information is printed: the screen +number, an absolute count of the number of XSync() calls made +(SyncCount), the rate of these calls during the previous interval +(Sync/s), the average round-trip time (in microseconds) of the last 10 +XSync() calls (avSync), the maximum round-trip time (in microseconds) of +the last 10 XSync calls (mxSync), the average number of XSync() requests +that were pending but not yet processed for each of the last 10 +processed XSync() calls, the maximum number of XSync() requests that +were pending but not yet processed for each of the last 10 processed +XSync() calls, and a histogram showing the distribution of the times of +all of the XSync() calls that were made during the previous interval. +.sp +(The length of the moving average and the number and value of histogram +bins are configurable at compile time in the +.B dmxstat.h +header file.) +.sp +.TP 8 +.BI "-syncbatch " interval +This option sets the +.I interval +in milliseconds for XSync() batching. An +.I interval +less than or equal to 0 will disable XSync() batching. The default +.I interval +is 100 ms. +.sp +.TP 8 +.BI "-nooffscreenopt" +This option disables the offscreen optimization. Since the lazy window +creation optimization requires the offscreen optimization to be enabled, +this option will also disable the lazy window creation optimization. +.sp +.TP 8 +.BI "-nowindowopt" +This option disables the lazy window creation optimization. +.sp +.TP 8 +.BI "-nosubdivprims" +This option disables the primitive subdivision optimization. +.sp +.TP 8 +.BI "-noxkb" +Disable use of the XKB extension for communication with the back end +displays. (Combine with +.B "-kb" +to disable all use of XKB.) +.sp +.TP 8 +.BI "-depth " int +This option sets the root window's default depth. When choosing a +default visual from those available on the back-end X server, the first +visual with that matches the depth specified is used. +.sp +This option can be combined with the +.BI "-cc" +option, which specifies the default color visual class, to force the use +of a specific depth and color class for the root window. +.sp +.TP 8 +.BI "-norender" +This option disables the RENDER extension. +.sp +.TP 8 +.BI "-noglxproxy" +This option disables GLX proxy -- the build-in GLX extension +implementation that is DMX aware. +.sp +.TP 8 +.BI "-noglxswapgroup" +This option disables the swap group and swap barrier extensions in GLX +proxy. +.sp +.TP 8 +.BI "-glxsyncswap" +This option enables synchronization after a swap buffers call by waiting +until all X protocol has been processed. When a client issues a +glXSwapBuffers request, Xdmx relays that request to each back-end X +server, and those requests are buffered along with all other protocol +requests. However, in systems that have large network buffers, this +buffering can lead to the set of back-end X servers handling the swap +buffers request asynchronously. With this option, an XSync() request is +issued to each back-end X server after sending the swap buffers request. +The XSync() requests will flush all buffered protocol (including the +swap buffers requests) and wait until the back-end X servers have +processed those requests before continuing. This option does not wait +until all GL commands have been processed so there might be previously +issued commands that are still being processed in the GL pipe when the +XSync() request returns. See the +.BI "-glxfinishswap" +option below if Xdmx should wait until the GL commands have been +processed. +.sp +.TP 8 +.BI "-glxfinishswap" +This option enables synchronization after a swap buffers call by waiting +until all GL commands have been completed. It is similar to the +.BI "-glxsyncswap" +option above; however, instead of issuing an XSync(), it issues a +glFinish() request to each back-end X server after sending the swap +buffers requests. The glFinish() request will flush all buffered +protocol requests, process both X and GL requests, and wait until all +previously called GL commands are complete before returning. +.sp +.TP 8 +.BI "-ignorebadfontpaths" +This option ignores font paths that are not available on all back-end +servers by removing the bad font path(s) from the default font path +list. If no valid font paths are left after removing the bad paths, an +error to that effect is printed in the log. +.sp +.TP 8 +.BI "-addremovescreens" +This option enables the dynamic addition and removal of screens, which +is disabled by default. Note that GLXProxy and Render do not yet +support dynamic addition and removal of screens, and must be disabled +via the +.BI "-noglxproxy" +and +.BI "-norender" +command line options described above. +.sp +.TP 8 +.BI "-param" +This option specifies parameters on the command line. Currently, only +parameters dealing with XKEYBOARD configuration are supported. These +parameters apply only to the core keyboard. Parameter values are +installation-dependent. Please see +.I /usr/X11R6/lib/X11/xkb +or a similar directory for complete information. +.RS +.TP 8 +.B XkbRules +Defaults to "xfree86". Other values may include "sgi" and "sun". +.sp +.TP 8 +.B XkbModel +Defaults to "pc101". When used with "xfree86" rules, other values may +include "pc102", "pc104", "pc105", "microsoft", and many others. When +used with "sun" rules, other values may include "type4" and "type5". +.sp +.TP 8 +.B XkbLayout +Defaults to "us". Other country codes and "dvorak" are usually +available. +.sp +.TP 8 +.B XkbVariant +Defaults to "". +.sp +.TP 8 +.B XkbOptions +Defaults to "". +.RE +.SH "CONFIGURATION FILE GRAMMAR" +The following words and tokens are reserved: +.RS +.B virtual +.B display +.B wall +.B option +.B param +.B { +.B } +.B ; +.B # +.RE +.PP +Comments start with a +.B # +mark and extend to the end of the line. They may appear anywhere. If a +configuration file is read into +.BR xdmxconfig , +the comments in that file will be preserved, but will not be editable. +.PP +The grammar is as follows: +.RS +virtual-list ::= [ virtual-list ] | virtual + +virtual ::= +.B virtual +[ name ] [ dim ] +.B { +dw-list +.B } + +dw-list ::= [ dw-list ] | dw + +dw ::= display | wall | option + +display ::= +.B display +name [ geometry ] [ / geometry ] [ origin ] +.B ; + +wall ::= +.B wall +[ dim ] [ dim ] name-list +.B ; + +option ::= +.B option +name-list +.B ; + +param ::= +.B param +name-list +.B ; + +param ::= +.B param { +param-list +.B } + +param-list ::= [ param-list ] | name-list +.B ; + +name-list ::= [ name-list ] | name + +name ::= string | double-quoted-string + +dim ::= integer +.B x +integer + +geometry ::= [ integer +.B x +integer ] [ signed-integer signed-integer ] + +origin ::= +.B @ +integer +.B x +integer +.RE +.PP +The name following +.B virtual +is used as an identifier for the configuration, and may be passed to +.B Xdmx +using the +.B \-config +command line option. The name of a display should be standard X display +name, although no checking is performed (e.g., "machine:0"). +.PP +For names, double quotes are optional unless the name is reserved or +contains spaces. +.PP +The first dimension following +.B wall +is the dimension for tiling (e.g., 2x4 or 4x4). The second dimension +following +.B wall +is the dimension of each display in the wall (e.g., 1280x1024). +.PP +The first geometry following +.B display +is the geometry of the screen window on the backend server. The second +geometry, which is always preceeded by a slash, is the geometry of the +root window. By default, the root window has the same geometry as the +screen window. +.PP +The +.B option +line can be used to specify any command-line options (e.g., +.BR \-input ). +(It cannot be used to specify the name of the front-end display.) The +option line is processed once at server startup, just line command line +options. This behavior may be unexpected. +.SH "CONFIGURATION FILE EXAMPLES" +Two displays being used for a desktop may be specified in any of the +following formats: +.RS +.nf +virtual example0 { + display d0:0 1280x1024 @0x0; + display d1:0 1280x1024 @1280x0; +} +.sp +virtual example1 { + display d0:0 1280x1024; + display d1:0 @1280x0; +} +.sp +virtual example2 { + display "d0:0"; + display "d1:0" @1280x0; +} +.sp +virtual example3 { wall 2x1 d0:0 d1:0; } +.fi +.RE +A 4x4 wall of 16 total displays could be specified as follows (if no +tiling dimension is specified, an approximate square is used): +.RS +.nf +virtual example4 { + wall d0:0 d1:0 d2:0 d3:0 + d4:0 d5:0 d6:0 d7:0 + d8:0 d9:0 da:0 db:0 + dc:0 dd:0 de:0 df:0; +} +.fi +.RE +.SH "FONT PATHS" +The font path used by the +.I Xdmx +front-end server will be propagated to each back-end server,which +requires that each back-end server have access to the exact same font +paths as the front-end server. This can be most easily handled by +either using a font server (e.g., xfs) or by remotely mounting the font +paths on each back-end server, and then setting the +.I Xdmx +server's default font path with the +-I "-fontpath" +command line option described above. +.PP +For example, if you specify a font path with the following command line: +.RS +Xdmx :1 -display d0:0 -fontpath /usr/fonts/75dpi/ -fontpath /usr/fonts/Type1/ +xinerama +.RE +Then, /usr/fonts/75dpi/ and /usr/fonts/Type1/ must be valid font paths +on the +.I Xdmx +server and all back-end server, which is d0 in this example. +.PP +Font servers can also be specified with the +.I "-fontpath" +option. For example, let's assume that a properly configured font +server is running on host d0. Then, the following command line +.RS +Xdmx :1 -display d0:0 -display d1:0 -fontpath tcp/d0:7100 +xinerama +.RE +will initialize the front-end +.I Xdmx +server and each of the back-end servers to use the font server on d0. +.PP +Some fonts might not be supported by either the front-end or the +back-end servers. For example, let's assume the front-end +.I Xdmx +server includes support Type1 fonts, but one of the back-end servers +does not. Let's also assume that the default font path for +.I Xdmx +includes Type1 fonts in its font path. Then, when +.I Xdmx +initializes the default font path to load the default font, the font +path that includes Type1 fonts (along with the other default font paths +that are used by the +.I Xdmx +server) is sent to the back-end server that cannot handle Type1 fonts. +That back-end server then rejects the font path and sends an error back +to the +.I Xdmx +server. +.I Xdmx +then prints an error message and exits because it failed to set the +default font path and was unable load the default font. +.PP +To fix this error, the offending font path must be removed from the +default font path by using a different +.I "-fontpath" +command line option. +.PP +The +.I "-fontpath" +option can also be added to the configuration file as described above. +.SH "COMMAND-LINE EXAMPLES" +The back-end machines are d0 and d1, core input is from the pointer and +keyboard attached to d0, clients will refer to :1 when opening windows: +.RS +Xdmx :1 -display d0:0 -display d1:0 +xinerama +.RE +.PP +As above, except with core input from d1: +.RS +Xdmx :1 -display d0:0 -display d1:0 -input d1:0 +xinerama +.RE +.PP +As above, except with core input from a console window on the local +display: +.RS +Xdmx :1 -display d0:0 -display d1:0 -input :0 +xinerama +.RE +.PP +As above, except with core input from the local keyboard and mouse: +.RS +Xdmx :1 -display d0:0 -display d1:0 -input local,kbd,ps2 +xinerama +.RE +Note that local input can be used under Linux while another X session is +running on :0 (assuming the user can access the Linux console tty and +mouse devices): a new (blank) VC will be used for keyboard input on the +local machine and the Ctrl-Alt-F* sequence will be available to change +to another VC (possibly back to another X session running on the local +machine). Using Ctrl-Alt-Backspace on the blank VC will terminate the +Xdmx session and return to the original VC. +.PP +This example uses the configuration file shown in the previous section: +.RS +Xdmx :1 -input :0 +xinerama -configfile filename -config example2 +.RE +With this configuration file line: +.RS +option -input :0 +xinerama; +.RE +the command line can be shortened to: +.RS +Xdmx :1 -configfile filename -config example2 +.RE +.SH "USING THE USB DEVICE DRIVERS" +.P +The USB device drivers use the devices called +.IR /dev/input/event0 ", " /dev/input/event1 ", etc." +under Linux. These devices are driven using the +.I evdev +Linux kernel module, which is part of the hid suite. Please note that +if you load the +.I mousedev +or +.I kbddev +Linux kernel modules, then USB devices will appear as core Linux input +devices and you will not be able to select between using the device only +as an +.I Xdmx +core device or an +.I Xdmx +XInput extension device. Further, you may be unable to unload the +.I mousedev +Linux kernel module if +.I XFree86 +is configured to use +.I /dev/input/mice +as an input device (this is quite helpful for laptop users and is set up +by default under some Linux distributions, but should be changed if USB +devices are to be used with +.IR Xdmx ). +.PP +The USB device drivers search through the Linux devices for the first +mouse, keyboard, or non-mouse-non-keyboard Linux device and use that +device. +.SH "KEYBOARD INITIALIZATION" +.PP +If +.I Xdmx +was invoked with +.I \-xkb +or was +.B not +compiled to use the XKEYBOARD extension, then a keyboard on a backend or +console will be initialized using the map that the host X server +provides. +.PP +If the XKEYBOARD extension is used for both +.I Xdmx +and the host X server for the keyboard (i.e., the backend or console X +server), then the type of the keyboard will +be obtained from the host X server and the keyboard under +.I Xdmx +will be initialized with that information. Otherwise, the default type +of keyboard will be initialized. In both cases, the map from the host X +server will +.B not +be used. This means that different initial behavior may be noted with +and without XKEYBOARD. Consistent and expected results will be obtained +by running XKEYBOARD on all servers and by avoiding the use of +.I xmodmap +on the backend or console X servers prior to starting +.IR Xdmx . +.PP +If +.I \-xkbmap +is specified on the +.I Xdmx +command line, then that map will currently be used for all keyboards. +.SH "MULTIPLE CORE KEYBOARDS" +X was not designed to support multiple core keyboards. However, +.I Xdmx +provides some support for multiple core keyboards. Best results will be +obtained if all of the keyboards are of the same type and are using the +same keyboard map. Because the X server passes raw key code information +to the X client, key symbols for keyboards with different key maps would +be different if the key code for each keyboard was sent without +translation to the client. Therefore, +.I Xdmx +will attempt to translate the key code from a core keyboard to the key +code for the key with the same key symbol of the +.B first +core keyboard that was loaded. If the key symbol appears in both maps, +the results will be expected. Otherwise, the second core keyboard will +return a NoSymbol key symbol for some keys that would have been +translated if it was the first core keyboard. +.ig +.SH ENVIRONMENT +.. +.ig +.SH FILES +.. +.SH "SEE ALSO" +.BR DMX "(3X), " X "(__miscmansuffix__), " Xserver "(1), " xdmxconfig "(1), " +.BR vdltodmx "(1), " xfs "(1), " xkbcomp (1) +.SH AUTHORS +Kevin E. Martin +.I , +David H. Dawes +.I , +and +Rickard E. (Rik) Faith +.IR . +.PP +Portions of +.I Xdmx +are based on code from The XFree86 Project +.RI ( http://www.xfree86.org ) +and X.Org +.RI ( http://www.x.org ). -- cgit v1.2.3