From 08cbf3b50bfe713044f36b363c73768cd042f13c Mon Sep 17 00:00:00 2001 From: marha Date: Mon, 16 May 2011 08:06:12 +0000 Subject: xserver xkeyboar-config mesa git update 16 May 2011 --- xorg-server/hw/xfree86/doc/Registry | 409 ++++++++++++++++++++++++++++++++++++ 1 file changed, 409 insertions(+) create mode 100644 xorg-server/hw/xfree86/doc/Registry (limited to 'xorg-server/hw/xfree86/doc/Registry') diff --git a/xorg-server/hw/xfree86/doc/Registry b/xorg-server/hw/xfree86/doc/Registry new file mode 100644 index 000000000..89a5f10fa --- /dev/null +++ b/xorg-server/hw/xfree86/doc/Registry @@ -0,0 +1,409 @@ +This is the XFree86 driver/module registry. To avoid name space clashes and +to maintain some consistency between drivers the important name spaces are +maintained here. + +1. Module Names. + +Each module is required to have a unique name. Registered names are: + +GLcore +acecad +afb +apm +ark +ati +atimisc +bitmap +bt8xx +calcomp +cfb +cfb16 +cfb24 +cfb32 +chips +cirrus +citron +cyrix +dbe +ddc +digitaledge +dmc +dri +drm +dynapro +elo2300 +elographics +extmod +fb +fbdev +fbdevhw +fi12x6 +freetype +glide +glint +glx +hyperpen +i128 +i2c +i740 +i810 +imstt +int10 +joystick +keyboard +layer +magellan +magictouch +mfb +mga +microtouch +mouse +msp34xx +mutouch +neomagic +newport +nv +pcidata +penmount +pex5 +r128 +radeon +rac +ramdac +record +rendition +s3 +s3virge +savage +shadow +shadowfb +siliconmotion +sis +spaceorb +speedo +summa +sunbw2 +suncg14 +suncg3 +suncg6 +sunffb +sunleo +suntcx +tdfx +tga +trident +tseng +type1 +v4l +vbe +vesa +vga +vgahw +vmware +void +wacom +xaa +xf1bpp +xf24_32bpp +xf4bpp +xf8_16bpp +xf8_32bpp +xf8_32wid +xie +xtrap +xtt + +2. External Module Object Symbols. + +Each module is required to use a unique prefix or prefixes for all of +its externally visible symbols. They should be unique without regard to +case. Registered prefixes are: + +ati +bt8xx +cfb +chips +fi12x6 +glide +glint +mfb +mga +msp34xx +neo +permedia +tseng +vga +vgahw +vmware +xaa +xf1bpp +xf4bpp + +3. Chipset Names. + +Each video driver is required to use a unique set of chipset names. Case, +white space and underscore characters are ignored when comparing chipset +names. All names listed here are in lower case with all white space and +underscores removed. Registered chipset names are: + +ati +ativga +ct64200 +ct64300 +ct65520 +ct65525 +ct65530 +ct65535 +ct65540 +ct65545 +ct65546 +ct65548 +ct65550 +ct65554 +ct65555 +ct68554 +ct69000 +et4000 +et4000w32 +et4000w32i +et4000w32p +et6000 +et6100 +generic +ibmvga +ibm8514 +mach32 +mach64 +mach8 +mga2064w +mga1064sg +mga2164w +mga2164wagp +neo2070 +neo2090 +neo2093 +neo2097 +neo2160 +neo2200 +tipm2 +vgawonder +voodoo + +4. Option Names. + +Option names and their usage should be consistent between drivers. +Case, white space and underscore characters are ignored when comparing +option names. The prefix "no" may be added or removed from boolean +option names. All names listed here are in their preferred user-visible +form. Some registered option names are: + +Types are: B = boolean, O = set/unset (no value), I = integer, S = string, + A = optional string, F = floating point number Q = frequency + +Scopes are: F = global flags, V = video driver, C = common (per screen), + I = input drivers, X = XAA, Xv = Xv extension, M = misc. + +Names currently in use: + +Name Type Scope Description +---------------------------------------------------------------------------- +AllowMouseOpenFail B F ignore mouse dev open failure +AllowNonLocalModInDev B F allow non-local mod of input devs +AllowNonLocalXvidtune B F allow non-local VidMode connections +BlankTime I F Screen saver timeout (min) +DisableModInDev B F disallow changing input devs +DisableVidModeExtension B F disable VidMode extension +DontVTSwitch B F disable Ctrl-Alt-Fn +DontZap B F disable Ctrl-Alt-BS sequence +DontZoom B F disable Ctrl-Alt-+/- +NoTrapSignals B F don't trap signals +OffTime I F Time before DPMS off mode active (min) +PciProbe1 O F use PCI probe algorithm 1 +PciProbe2 O F use PCI probe algorithm 2 +PciForceConfig1 O F force PCI config type 1 +PciForceConfig2 O F force PCI config type 2 +Pixmap I F depth 24 pixmap size (24 or 32) +StandbyTime I F Time before DPMS standby active (min) +SuspendTime I F Time before DPMS suspend mode active (min) + +BackingStore B C Enable backing store +DDC B C Enable/disable DDC +DDC1 B C Enable/disable DDC1 +DDC2 B C Enable/disable DDC2 +DPMS O C Enable DPMS +MTRR B C Enable/disable setting MTRRs + +BaudRate I I Serial port baud rate +ButtonNumber I I Button number (for touch screen?) +ButtonThreshold I I ?? +ClearDTR O I Clear serial port DTR +ClearRTS O I Clear serial port RTS +DataBits I I Serial port data bits +DemandLoad O I ?? +Device S I Device file name +DeviceName S I Input device name +FlowControl S I Serial flow control ("xon", "none") +Floating B I Device initialised as floating +HistorySize I I ?? +MaxX I I Maximum X coordinate +MaxY I I Maximum Y coordinate +MinX I I Minimum X coordinate +MinY I I Minimum Y coordinate +Parity S I Serial port parity ("odd", "even", "none") +ReportDelay I I ?? +ReportingMode S I may be "raw" or "scaled" +ScreenNumber I I Screen number (for touch screen) +SendCoreEvents B I Send core events +StopBits I I Serial port stop bits +SwapXY B I Swap the X and Y axes +UntouchDelay I I ?? +Vmin I I Tty VMIN +Vtime I I Tty VTIME + + +18BitBus B V ?? +8Plus16 B V Enable depth 8 + depth 16 with overlay +8Plus24 B V Enable depth 8 + depth 24 with overlay +BlockWrite B V Enable/disable block write +ColorKey I V Set the color key for overlay modes +CompositeSync B V Composite sync +CRTDisplay B V Force display on CRT, not LCD +CRTScreen B V Display on CRT, not LCD (Obsolete) +EarlyRasPrecharge O V Early RAS pre-charge +FastDRAM O V Fast DRAM +FifoAggressive O V Aggressive FIFO setting +FifoConservative O V Conservative FIFO setting +FifoModerate O V Moderate FIFO setting +FireGL3000 B V Card is Diamond FireGL3000 +FixPanelSize B V ?? +FPClock8 Q V Flat panel clock for 8bpp fb (MHz) +FPClock16 Q V Flat panel clock for 16bpp fb (MHz) +FPClock24 Q V Flat panel clock for 24bpp fb (MHz) +FPClock32 Q V Flat panel clock for 32bpp fb (MHz) +FPMVRAM O V Fast page mode VRAM +FramebufferWC B V Enable/disable WC for the framebuffer +GlideDevice I V Selects which Voodoo board to use +HiBitHigh O V High clock bit default to set +HiBitLow O V High clock bit default to cleared +HWClocks B V Enable/disable HW clocks +HWCursor B V Enable/disable HW cursor +LateRasPrecharge O V Late RAS pre-charge +Legend O V Card is Legend ET4000 +LCDCenter B V Enable/disable centering for LCD displays +Linear B V Enable/disable linear framebuffer +MCLK Q V Specify the current MCLK value (MHz) +MedDRAM B V Medium speed DRAM +MemCfg1 I V ?? +MemCfg2 I V ?? +MGASDRAM B V Mga card has SDRAM +MMIO B V Enable/disable memory mapped I/O +MMIOCache B V Enable/Disable MMIO cache +MuxThreshold I V Multiplexing threshold (kHz) +NoAccel B V Disable/enable acceleration +NoClockChip B V ?? +NoStretch B V Disable/enable stretching for LCD displays +OnAtExit B V Leave video signal on when exiting server +OverclockMem B V Enable memory overclocking +Overlay A V Enable multi-depth/overlay. An optional + string "M,N" may be specified, where + M, N are the depths. +PanelDisplay B V Force display on LCD +PciBurst B V Enable/disable PCI burst mode +PciRetry B V Enable/disable PCI retries +ProbeClocks B V Force probe for non-programmable clocks +ReferenceClock Q V Clock generator reference frequency +RGBbits I V Number of significant bits per rgb +Rotate S V Rotate the virtual display (CW or CCW) +SetLCDClk Q V Set LCD clock (MHz) +SetMclk Q V Set Memory Clock (MHz) +ShadowFB B V Enable shadow framebuffer layer +ShowCache B V Enable viewing of offscreen memory +ShowOverscan O V Set the overscan area to a visible colour +SlowDRAM O V Slow DRAM +SlowEDODRAM O V Slow EDO DRAM +STN B V STN screen type (??) +SWCursor B V Enable/disable SW cursor +SuspendHack B V ?? +SyncOnGreen B V Enable/disable sync on green +TurboQueue B V Enable/disable turbo queue +UseFBDev B V Use the fbdev driver interface +UseModeLine B V Use Modeline (??) +W32Interleave B V ?? + +Buffers I Xv Number of buffers +Device S Xv Device file name +Expose B Xv Disable occlusion clipping (see DESIGN) +FramesPerSec I Xv Max. refresh frequency + +XAA options. All are of type "O" and scope "X", and are self-explanatory + +XaaNoColor8x8PatternFillRect +XaaNoColor8x8PatternFillTrap +XaaNoCPUToScreenColorExpandFill +XaaNoDashedBresenhamLine +XaaNoDashedTwoPointLine +XaaNoScreenToScreenCopy +XaaNoImageReadRect +XaaNoImageWriteRect +XaaNoMono8x8PatternFillRect +XaaNoMono8x8PatternFillTrap +XaaNoOffscreenPixmaps +XaaNoPixmapCache +XaaNoScanlineCPUToScreenColorExpandFill +XaaNoScanlineImageWriteRect +XaaNoScreenToScreenColorExpandFill +XaaNoSolidBresenhamLine +XaaNoSolidFillRect +XaaNoSolidFillTrap +XaaNoSolidHorVertLine +XaaNoSolidTwoPointLine + + +Names used in previous versions: + +16Clocks +8Clocks +ClkDiv2 +EDO VRAM +ExternDisp +ExtFramBuf +FastVRAM +FavorBitBlt +InternDisp +NoBitBlt +NoFontCache +NoImageBlt +NoMemAccess +NoPciDisconnect +NoPixmapCache +NoProgramClocks +NoSplitXfer +OverrideBIOS +OverrideValidateMode +ProgLcdModeRegs +ProgLcdModeStretch +SlowDRAMrefresh +SlowVRAM +SwapHiBit + + +5. Ramdac Names. + +Ramdac names should be consistent between drivers. Case, white space +and underscore characters are ignored when comparing ramdac names. All +names listed here are in lower case with all white space and underscores +removed. + + +6. Clock Chip Names. + +Clock chip names should be consistent between drivers. Case, white +space and underscore characters are ignored when comparing clock chip +names. All names listed here are in lower case with all white space +and underscores removed. + + + + + +$XFree86: xc/programs/Xserver/hw/xfree86/Registry,v 1.18 2002/04/06 18:31:09 tsi Exp $ -- cgit v1.2.3