From 3562e78743202e43aec8727005182a2558117eca Mon Sep 17 00:00:00 2001 From: marha Date: Sun, 28 Jun 2009 22:07:26 +0000 Subject: Checked in the following released items: xkeyboard-config-1.4.tar.gz ttf-bitstream-vera-1.10.tar.gz font-alias-1.0.1.tar.gz font-sun-misc-1.0.0.tar.gz font-sun-misc-1.0.0.tar.gz font-sony-misc-1.0.0.tar.gz font-schumacher-misc-1.0.0.tar.gz font-mutt-misc-1.0.0.tar.gz font-misc-misc-1.0.0.tar.gz font-misc-meltho-1.0.0.tar.gz font-micro-misc-1.0.0.tar.gz font-jis-misc-1.0.0.tar.gz font-isas-misc-1.0.0.tar.gz font-dec-misc-1.0.0.tar.gz font-daewoo-misc-1.0.0.tar.gz font-cursor-misc-1.0.0.tar.gz font-arabic-misc-1.0.0.tar.gz font-winitzki-cyrillic-1.0.0.tar.gz font-misc-cyrillic-1.0.0.tar.gz font-cronyx-cyrillic-1.0.0.tar.gz font-screen-cyrillic-1.0.1.tar.gz font-xfree86-type1-1.0.1.tar.gz font-adobe-utopia-type1-1.0.1.tar.gz font-ibm-type1-1.0.0.tar.gz font-bitstream-type1-1.0.0.tar.gz font-bitstream-speedo-1.0.0.tar.gz font-bh-ttf-1.0.0.tar.gz font-bh-type1-1.0.0.tar.gz font-bitstream-100dpi-1.0.0.tar.gz font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz font-bh-100dpi-1.0.0.tar.gz font-adobe-utopia-100dpi-1.0.1.tar.gz font-adobe-100dpi-1.0.0.tar.gz font-util-1.0.1.tar.gz font-bitstream-75dpi-1.0.0.tar.gz font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz font-adobe-utopia-75dpi-1.0.1.tar.gz font-bh-75dpi-1.0.0.tar.gz bdftopcf-1.0.1.tar.gz font-adobe-75dpi-1.0.0.tar.gz mkfontscale-1.0.6.tar.gz openssl-0.9.8k.tar.gz bigreqsproto-1.0.2.tar.gz xtrans-1.2.2.tar.gz resourceproto-1.0.2.tar.gz inputproto-1.4.4.tar.gz compositeproto-0.4.tar.gz damageproto-1.1.0.tar.gz zlib-1.2.3.tar.gz xkbcomp-1.0.5.tar.gz freetype-2.3.9.tar.gz pthreads-w32-2-8-0-release.tar.gz pixman-0.12.0.tar.gz kbproto-1.0.3.tar.gz evieext-1.0.2.tar.gz fixesproto-4.0.tar.gz recordproto-1.13.2.tar.gz randrproto-1.2.2.tar.gz scrnsaverproto-1.1.0.tar.gz renderproto-0.9.3.tar.gz xcmiscproto-1.1.2.tar.gz fontsproto-2.0.2.tar.gz xextproto-7.0.3.tar.gz xproto-7.0.14.tar.gz libXdmcp-1.0.2.tar.gz libxkbfile-1.0.5.tar.gz libfontenc-1.0.4.tar.gz libXfont-1.3.4.tar.gz libX11-1.1.5.tar.gz libXau-1.0.4.tar.gz libxcb-1.1.tar.gz xorg-server-1.5.3.tar.gz --- xorg-server/hw/xfree86/i2c/Makefile.am | 43 ++ xorg-server/hw/xfree86/i2c/Makefile.in | 810 +++++++++++++++++++++++++ xorg-server/hw/xfree86/i2c/bt829.c | 745 +++++++++++++++++++++++ xorg-server/hw/xfree86/i2c/bt829.h | 97 +++ xorg-server/hw/xfree86/i2c/bt829_module.c | 28 + xorg-server/hw/xfree86/i2c/fi1236.c | 609 +++++++++++++++++++ xorg-server/hw/xfree86/i2c/fi1236.h | 110 ++++ xorg-server/hw/xfree86/i2c/fi1236_module.c | 32 + xorg-server/hw/xfree86/i2c/i2c_def.h | 14 + xorg-server/hw/xfree86/i2c/msp3430.c | 726 +++++++++++++++++++++++ xorg-server/hw/xfree86/i2c/msp3430.h | 114 ++++ xorg-server/hw/xfree86/i2c/msp3430_module.c | 32 + xorg-server/hw/xfree86/i2c/tda8425.c | 78 +++ xorg-server/hw/xfree86/i2c/tda8425.h | 42 ++ xorg-server/hw/xfree86/i2c/tda8425_module.c | 32 + xorg-server/hw/xfree86/i2c/tda9850.c | 112 ++++ xorg-server/hw/xfree86/i2c/tda9850.h | 39 ++ xorg-server/hw/xfree86/i2c/tda9850_module.c | 32 + xorg-server/hw/xfree86/i2c/tda9885.c | 104 ++++ xorg-server/hw/xfree86/i2c/tda9885.h | 60 ++ xorg-server/hw/xfree86/i2c/tda9885_module.c | 32 + xorg-server/hw/xfree86/i2c/uda1380.c | 183 ++++++ xorg-server/hw/xfree86/i2c/uda1380.h | 75 +++ xorg-server/hw/xfree86/i2c/uda1380_module.c | 32 + xorg-server/hw/xfree86/i2c/xf86i2c.c | 890 ++++++++++++++++++++++++++++ xorg-server/hw/xfree86/i2c/xf86i2c.h | 96 +++ 26 files changed, 5167 insertions(+) create mode 100644 xorg-server/hw/xfree86/i2c/Makefile.am create mode 100644 xorg-server/hw/xfree86/i2c/Makefile.in create mode 100644 xorg-server/hw/xfree86/i2c/bt829.c create mode 100644 xorg-server/hw/xfree86/i2c/bt829.h create mode 100644 xorg-server/hw/xfree86/i2c/bt829_module.c create mode 100644 xorg-server/hw/xfree86/i2c/fi1236.c create mode 100644 xorg-server/hw/xfree86/i2c/fi1236.h create mode 100644 xorg-server/hw/xfree86/i2c/fi1236_module.c create mode 100644 xorg-server/hw/xfree86/i2c/i2c_def.h create mode 100644 xorg-server/hw/xfree86/i2c/msp3430.c create mode 100644 xorg-server/hw/xfree86/i2c/msp3430.h create mode 100644 xorg-server/hw/xfree86/i2c/msp3430_module.c create mode 100644 xorg-server/hw/xfree86/i2c/tda8425.c create mode 100644 xorg-server/hw/xfree86/i2c/tda8425.h create mode 100644 xorg-server/hw/xfree86/i2c/tda8425_module.c create mode 100644 xorg-server/hw/xfree86/i2c/tda9850.c create mode 100644 xorg-server/hw/xfree86/i2c/tda9850.h create mode 100644 xorg-server/hw/xfree86/i2c/tda9850_module.c create mode 100644 xorg-server/hw/xfree86/i2c/tda9885.c create mode 100644 xorg-server/hw/xfree86/i2c/tda9885.h create mode 100644 xorg-server/hw/xfree86/i2c/tda9885_module.c create mode 100644 xorg-server/hw/xfree86/i2c/uda1380.c create mode 100644 xorg-server/hw/xfree86/i2c/uda1380.h create mode 100644 xorg-server/hw/xfree86/i2c/uda1380_module.c create mode 100644 xorg-server/hw/xfree86/i2c/xf86i2c.c create mode 100644 xorg-server/hw/xfree86/i2c/xf86i2c.h (limited to 'xorg-server/hw/xfree86/i2c') diff --git a/xorg-server/hw/xfree86/i2c/Makefile.am b/xorg-server/hw/xfree86/i2c/Makefile.am new file mode 100644 index 000000000..a16d88071 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/Makefile.am @@ -0,0 +1,43 @@ +noinst_LIBRARIES = libi2c.a + +multimediadir = $(moduledir)/multimedia +multimedia_LTLIBRARIES = \ + bt829_drv.la \ + fi1236_drv.la \ + msp3430_drv.la \ + tda8425_drv.la \ + tda9850_drv.la \ + tda9885_drv.la \ + uda1380_drv.la + +libi2c_a_SOURCES = xf86i2c.c + +INCLUDES = $(XORG_INCS) + +AM_CFLAGS = $(DIX_CFLAGS) $(XORG_CFLAGS) + +sdk_HEADERS = xf86i2c.h bt829.h fi1236.h msp3430.h tda8425.h tda9850.h tda9885.h uda1380.h i2c_def.h + +# +# i2c drivers +# +bt829_drv_la_LDFLAGS = -module -avoid-version +bt829_drv_la_SOURCES = bt829.c bt829.h bt829_module.c + +fi1236_drv_la_LDFLAGS = -module -avoid-version +fi1236_drv_la_SOURCES = fi1236.c fi1236.h fi1236_module.c + +msp3430_drv_la_LDFLAGS = -module -avoid-version +msp3430_drv_la_SOURCES = msp3430.c msp3430.h msp3430_module.c + +tda8425_drv_la_LDFLAGS = -module -avoid-version +tda8425_drv_la_SOURCES = tda8425.c tda8425.h tda8425_module.c + +tda9850_drv_la_LDFLAGS = -module -avoid-version +tda9850_drv_la_SOURCES = tda9850.c tda9850.h tda9850_module.c + +tda9885_drv_la_LDFLAGS = -module -avoid-version +tda9885_drv_la_SOURCES = tda9885.c tda9885.h tda9885_module.c + +uda1380_drv_la_LDFLAGS = -module -avoid-version +uda1380_drv_la_SOURCES = uda1380.c uda1380.h uda1380_module.c diff --git a/xorg-server/hw/xfree86/i2c/Makefile.in b/xorg-server/hw/xfree86/i2c/Makefile.in new file mode 100644 index 000000000..dec6218fd --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/Makefile.in @@ -0,0 +1,810 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = hw/xfree86/i2c +DIST_COMMON = $(sdk_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \ + $(top_builddir)/include/xorg-server.h \ + $(top_builddir)/include/dix-config.h \ + $(top_builddir)/include/xgl-config.h \ + $(top_builddir)/include/xorg-config.h \ + $(top_builddir)/include/xkb-config.h \ + $(top_builddir)/include/xwin-config.h \ + $(top_builddir)/include/kdrive-config.h +CONFIG_CLEAN_FILES = +LIBRARIES = $(noinst_LIBRARIES) +ARFLAGS = cru +libi2c_a_AR = $(AR) $(ARFLAGS) +libi2c_a_LIBADD = +am_libi2c_a_OBJECTS = xf86i2c.$(OBJEXT) +libi2c_a_OBJECTS = $(am_libi2c_a_OBJECTS) +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(multimediadir)" "$(DESTDIR)$(sdkdir)" +multimediaLTLIBRARIES_INSTALL = $(INSTALL) +LTLIBRARIES = $(multimedia_LTLIBRARIES) +bt829_drv_la_LIBADD = +am_bt829_drv_la_OBJECTS = bt829.lo bt829_module.lo +bt829_drv_la_OBJECTS = $(am_bt829_drv_la_OBJECTS) +bt829_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(bt829_drv_la_LDFLAGS) $(LDFLAGS) -o $@ +fi1236_drv_la_LIBADD = +am_fi1236_drv_la_OBJECTS = fi1236.lo fi1236_module.lo +fi1236_drv_la_OBJECTS = $(am_fi1236_drv_la_OBJECTS) +fi1236_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(fi1236_drv_la_LDFLAGS) $(LDFLAGS) -o $@ +msp3430_drv_la_LIBADD = +am_msp3430_drv_la_OBJECTS = msp3430.lo msp3430_module.lo +msp3430_drv_la_OBJECTS = $(am_msp3430_drv_la_OBJECTS) +msp3430_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(msp3430_drv_la_LDFLAGS) $(LDFLAGS) -o $@ +tda8425_drv_la_LIBADD = +am_tda8425_drv_la_OBJECTS = tda8425.lo tda8425_module.lo +tda8425_drv_la_OBJECTS = $(am_tda8425_drv_la_OBJECTS) +tda8425_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(tda8425_drv_la_LDFLAGS) $(LDFLAGS) -o $@ +tda9850_drv_la_LIBADD = +am_tda9850_drv_la_OBJECTS = tda9850.lo tda9850_module.lo +tda9850_drv_la_OBJECTS = $(am_tda9850_drv_la_OBJECTS) +tda9850_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(tda9850_drv_la_LDFLAGS) $(LDFLAGS) -o $@ +tda9885_drv_la_LIBADD = +am_tda9885_drv_la_OBJECTS = tda9885.lo tda9885_module.lo +tda9885_drv_la_OBJECTS = $(am_tda9885_drv_la_OBJECTS) +tda9885_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(tda9885_drv_la_LDFLAGS) $(LDFLAGS) -o $@ +uda1380_drv_la_LIBADD = +am_uda1380_drv_la_OBJECTS = uda1380.lo uda1380_module.lo +uda1380_drv_la_OBJECTS = $(am_uda1380_drv_la_OBJECTS) +uda1380_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(uda1380_drv_la_LDFLAGS) $(LDFLAGS) -o $@ +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ +SOURCES = $(libi2c_a_SOURCES) $(bt829_drv_la_SOURCES) \ + $(fi1236_drv_la_SOURCES) $(msp3430_drv_la_SOURCES) \ + $(tda8425_drv_la_SOURCES) $(tda9850_drv_la_SOURCES) \ + $(tda9885_drv_la_SOURCES) $(uda1380_drv_la_SOURCES) +DIST_SOURCES = $(libi2c_a_SOURCES) $(bt829_drv_la_SOURCES) \ + $(fi1236_drv_la_SOURCES) $(msp3430_drv_la_SOURCES) \ + $(tda8425_drv_la_SOURCES) $(tda9850_drv_la_SOURCES) \ + $(tda9885_drv_la_SOURCES) $(uda1380_drv_la_SOURCES) +sdkHEADERS_INSTALL = $(INSTALL_HEADER) +HEADERS = $(sdk_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ +ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ +ALLOCA = @ALLOCA@ +AMTAR = @AMTAR@ +APPDEFAULTDIR = @APPDEFAULTDIR@ +APPLE_APPLICATIONS_DIR = @APPLE_APPLICATIONS_DIR@ +APP_MAN_DIR = @APP_MAN_DIR@ +APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BASE_FONT_PATH = @BASE_FONT_PATH@ +BUILD_DATE = @BUILD_DATE@ +BUILD_TIME = @BUILD_TIME@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +COMPILEDDEFAULTFONTPATH = @COMPILEDDEFAULTFONTPATH@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DARWIN_LIBS = @DARWIN_LIBS@ +DBUS_CFLAGS = @DBUS_CFLAGS@ +DBUS_LIBS = @DBUS_LIBS@ +DEFAULT_LIBRARY_PATH = @DEFAULT_LIBRARY_PATH@ +DEFAULT_LOGPREFIX = @DEFAULT_LOGPREFIX@ +DEFAULT_MODULE_PATH = @DEFAULT_MODULE_PATH@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DGA_CFLAGS = @DGA_CFLAGS@ +DGA_LIBS = @DGA_LIBS@ +DIX_CFLAGS = @DIX_CFLAGS@ +DLLTOOL = @DLLTOOL@ +DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@ +DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@ +DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@ +DMXMODULES_LIBS = @DMXMODULES_LIBS@ +DMXXIEXAMPLES_DEP_CFLAGS = @DMXXIEXAMPLES_DEP_CFLAGS@ +DMXXIEXAMPLES_DEP_LIBS = @DMXXIEXAMPLES_DEP_LIBS@ +DMXXMUEXAMPLES_DEP_CFLAGS = @DMXXMUEXAMPLES_DEP_CFLAGS@ +DMXXMUEXAMPLES_DEP_LIBS = @DMXXMUEXAMPLES_DEP_LIBS@ +DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@ +DRI2PROTO_LIBS = @DRI2PROTO_LIBS@ +DRIPROTO_CFLAGS = @DRIPROTO_CFLAGS@ +DRIPROTO_LIBS = @DRIPROTO_LIBS@ +DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ +DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ +DRI_DRIVER_PATH = @DRI_DRIVER_PATH@ +DSYMUTIL = @DSYMUTIL@ +DTRACE = @DTRACE@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +FILE_MAN_DIR = @FILE_MAN_DIR@ +FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ +FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ +FREETYPE_LIBS = @FREETYPE_LIBS@ +GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@ +GLX_DEFINES = @GLX_DEFINES@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +HAL_CFLAGS = @HAL_CFLAGS@ +HAL_LIBS = @HAL_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KDRIVE_CFLAGS = @KDRIVE_CFLAGS@ +KDRIVE_INCS = @KDRIVE_INCS@ +KDRIVE_LIBS = @KDRIVE_LIBS@ +KDRIVE_LOCAL_LIBS = @KDRIVE_LOCAL_LIBS@ +KDRIVE_PURE_INCS = @KDRIVE_PURE_INCS@ +KDRIVE_PURE_LIBS = @KDRIVE_PURE_LIBS@ +LAUNCHD = @LAUNCHD@ +LDFLAGS = @LDFLAGS@ +LD_EXPORT_SYMBOLS_FLAG = @LD_EXPORT_SYMBOLS_FLAG@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ +LIBDRM_LIBS = @LIBDRM_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIB_MAN_DIR = @LIB_MAN_DIR@ +LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ +LINUXDOC = @LINUXDOC@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MAKE_HTML = @MAKE_HTML@ +MAKE_PDF = @MAKE_PDF@ +MAKE_PS = @MAKE_PS@ +MAKE_TEXT = @MAKE_TEXT@ +MESA_SOURCE = @MESA_SOURCE@ +MISC_MAN_DIR = @MISC_MAN_DIR@ +MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ +MKDIR_P = @MKDIR_P@ +MKFONTDIR = @MKFONTDIR@ +MKFONTSCALE = @MKFONTSCALE@ +NMEDIT = @NMEDIT@ +OBJC = @OBJC@ +OBJCCLD = @OBJCCLD@ +OBJCDEPMODE = @OBJCDEPMODE@ +OBJCFLAGS = @OBJCFLAGS@ +OBJCLINK = @OBJCLINK@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OPENSSL_CFLAGS = @OPENSSL_CFLAGS@ +OPENSSL_LIBS = @OPENSSL_LIBS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@ +PCIACCESS_LIBS = @PCIACCESS_LIBS@ +PCI_TXT_IDS_PATH = @PCI_TXT_IDS_PATH@ +PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +PROJECTROOT = @PROJECTROOT@ +PS2PDF = @PS2PDF@ +RANLIB = @RANLIB@ +RAWCPP = @RAWCPP@ +RAWCPPFLAGS = @RAWCPPFLAGS@ +SED = @SED@ +SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@ +SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@ +STRIP = @STRIP@ +TSLIB_CFLAGS = @TSLIB_CFLAGS@ +TSLIB_LIBS = @TSLIB_LIBS@ +UTILS_SYS_LIBS = @UTILS_SYS_LIBS@ +VENDOR_MAN_VERSION = @VENDOR_MAN_VERSION@ +VENDOR_NAME = @VENDOR_NAME@ +VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@ +VENDOR_RELEASE = @VENDOR_RELEASE@ +VERSION = @VERSION@ +X11APP_ARCHS = @X11APP_ARCHS@ +X11EXAMPLES_DEP_CFLAGS = @X11EXAMPLES_DEP_CFLAGS@ +X11EXAMPLES_DEP_LIBS = @X11EXAMPLES_DEP_LIBS@ +XDMCP_CFLAGS = @XDMCP_CFLAGS@ +XDMCP_LIBS = @XDMCP_LIBS@ +XDMXCONFIG_DEP_CFLAGS = @XDMXCONFIG_DEP_CFLAGS@ +XDMXCONFIG_DEP_LIBS = @XDMXCONFIG_DEP_LIBS@ +XDMX_CFLAGS = @XDMX_CFLAGS@ +XDMX_LIBS = @XDMX_LIBS@ +XDMX_SYS_LIBS = @XDMX_SYS_LIBS@ +XEGLMODULES_CFLAGS = @XEGLMODULES_CFLAGS@ +XEGL_LIBS = @XEGL_LIBS@ +XEGL_SYS_LIBS = @XEGL_SYS_LIBS@ +XEPHYR_CFLAGS = @XEPHYR_CFLAGS@ +XEPHYR_DRI_LIBS = @XEPHYR_DRI_LIBS@ +XEPHYR_INCS = @XEPHYR_INCS@ +XEPHYR_LIBS = @XEPHYR_LIBS@ +XF86CONFIGFILE = @XF86CONFIGFILE@ +XF86MISC_CFLAGS = @XF86MISC_CFLAGS@ +XF86MISC_LIBS = @XF86MISC_LIBS@ +XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@ +XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@ +XGLMODULES_CFLAGS = @XGLMODULES_CFLAGS@ +XGLMODULES_LIBS = @XGLMODULES_LIBS@ +XGLXMODULES_CFLAGS = @XGLXMODULES_CFLAGS@ +XGLXMODULES_LIBS = @XGLXMODULES_LIBS@ +XGLX_LIBS = @XGLX_LIBS@ +XGLX_SYS_LIBS = @XGLX_SYS_LIBS@ +XGL_LIBS = @XGL_LIBS@ +XGL_MODULE_PATH = @XGL_MODULE_PATH@ +XGL_SYS_LIBS = @XGL_SYS_LIBS@ +XKB_BASE_DIRECTORY = @XKB_BASE_DIRECTORY@ +XKB_BIN_DIRECTORY = @XKB_BIN_DIRECTORY@ +XKB_COMPILED_DIR = @XKB_COMPILED_DIR@ +XKM_OUTPUT_DIR = @XKM_OUTPUT_DIR@ +XLIB_CFLAGS = @XLIB_CFLAGS@ +XLIB_LIBS = @XLIB_LIBS@ +XNESTMODULES_CFLAGS = @XNESTMODULES_CFLAGS@ +XNESTMODULES_LIBS = @XNESTMODULES_LIBS@ +XNEST_LIBS = @XNEST_LIBS@ +XNEST_SYS_LIBS = @XNEST_SYS_LIBS@ +XORGCFG_DEP_CFLAGS = @XORGCFG_DEP_CFLAGS@ +XORGCFG_DEP_LIBS = @XORGCFG_DEP_LIBS@ +XORGCONFIG_DEP_CFLAGS = @XORGCONFIG_DEP_CFLAGS@ +XORGCONFIG_DEP_LIBS = @XORGCONFIG_DEP_LIBS@ +XORG_CFLAGS = @XORG_CFLAGS@ +XORG_INCS = @XORG_INCS@ +XORG_LIBS = @XORG_LIBS@ +XORG_MODULES_CFLAGS = @XORG_MODULES_CFLAGS@ +XORG_MODULES_LIBS = @XORG_MODULES_LIBS@ +XORG_OS = @XORG_OS@ +XORG_OS_SUBDIR = @XORG_OS_SUBDIR@ +XORG_SYS_LIBS = @XORG_SYS_LIBS@ +XPRINTMODULES_CFLAGS = @XPRINTMODULES_CFLAGS@ +XPRINTMODULES_LIBS = @XPRINTMODULES_LIBS@ +XPRINTPROTO_CFLAGS = @XPRINTPROTO_CFLAGS@ +XPRINTPROTO_LIBS = @XPRINTPROTO_LIBS@ +XPRINT_CFLAGS = @XPRINT_CFLAGS@ +XPRINT_LIBS = @XPRINT_LIBS@ +XPRINT_SYS_LIBS = @XPRINT_SYS_LIBS@ +XRESEXAMPLES_DEP_CFLAGS = @XRESEXAMPLES_DEP_CFLAGS@ +XRESEXAMPLES_DEP_LIBS = @XRESEXAMPLES_DEP_LIBS@ +XSDL_INCS = @XSDL_INCS@ +XSDL_LIBS = @XSDL_LIBS@ +XSERVERCFLAGS_CFLAGS = @XSERVERCFLAGS_CFLAGS@ +XSERVERCFLAGS_LIBS = @XSERVERCFLAGS_LIBS@ +XSERVERLIBS_CFLAGS = @XSERVERLIBS_CFLAGS@ +XSERVERLIBS_LIBS = @XSERVERLIBS_LIBS@ +XSERVER_LIBS = @XSERVER_LIBS@ +XSERVER_SYS_LIBS = @XSERVER_SYS_LIBS@ +XTSTEXAMPLES_DEP_CFLAGS = @XTSTEXAMPLES_DEP_CFLAGS@ +XTSTEXAMPLES_DEP_LIBS = @XTSTEXAMPLES_DEP_LIBS@ +XVFB_LIBS = @XVFB_LIBS@ +XVFB_SYS_LIBS = @XVFB_SYS_LIBS@ +XWINMODULES_CFLAGS = @XWINMODULES_CFLAGS@ +XWINMODULES_LIBS = @XWINMODULES_LIBS@ +XWIN_LIBS = @XWIN_LIBS@ +XWIN_SERVER_NAME = @XWIN_SERVER_NAME@ +XWIN_SYS_LIBS = @XWIN_SYS_LIBS@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ +__XCONFIGFILE__ = @__XCONFIGFILE__@ +abi_ansic = @abi_ansic@ +abi_extension = @abi_extension@ +abi_font = @abi_font@ +abi_videodrv = @abi_videodrv@ +abi_xinput = @abi_xinput@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +driverdir = @driverdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +extdir = @extdir@ +ft_config = @ft_config@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +launchagentsdir = @launchagentsdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logdir = @logdir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +moduledir = @moduledir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sdkdir = @sdkdir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xglmoduledir = @xglmoduledir@ +xpconfigdir = @xpconfigdir@ +noinst_LIBRARIES = libi2c.a +multimediadir = $(moduledir)/multimedia +multimedia_LTLIBRARIES = \ + bt829_drv.la \ + fi1236_drv.la \ + msp3430_drv.la \ + tda8425_drv.la \ + tda9850_drv.la \ + tda9885_drv.la \ + uda1380_drv.la + +libi2c_a_SOURCES = xf86i2c.c +INCLUDES = $(XORG_INCS) +AM_CFLAGS = $(DIX_CFLAGS) $(XORG_CFLAGS) +sdk_HEADERS = xf86i2c.h bt829.h fi1236.h msp3430.h tda8425.h tda9850.h tda9885.h uda1380.h i2c_def.h + +# +# i2c drivers +# +bt829_drv_la_LDFLAGS = -module -avoid-version +bt829_drv_la_SOURCES = bt829.c bt829.h bt829_module.c +fi1236_drv_la_LDFLAGS = -module -avoid-version +fi1236_drv_la_SOURCES = fi1236.c fi1236.h fi1236_module.c +msp3430_drv_la_LDFLAGS = -module -avoid-version +msp3430_drv_la_SOURCES = msp3430.c msp3430.h msp3430_module.c +tda8425_drv_la_LDFLAGS = -module -avoid-version +tda8425_drv_la_SOURCES = tda8425.c tda8425.h tda8425_module.c +tda9850_drv_la_LDFLAGS = -module -avoid-version +tda9850_drv_la_SOURCES = tda9850.c tda9850.h tda9850_module.c +tda9885_drv_la_LDFLAGS = -module -avoid-version +tda9885_drv_la_SOURCES = tda9885.c tda9885.h tda9885_module.c +uda1380_drv_la_LDFLAGS = -module -avoid-version +uda1380_drv_la_SOURCES = uda1380.c uda1380.h uda1380_module.c +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/i2c/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign hw/xfree86/i2c/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +clean-noinstLIBRARIES: + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) +libi2c.a: $(libi2c_a_OBJECTS) $(libi2c_a_DEPENDENCIES) + -rm -f libi2c.a + $(libi2c_a_AR) libi2c.a $(libi2c_a_OBJECTS) $(libi2c_a_LIBADD) + $(RANLIB) libi2c.a +install-multimediaLTLIBRARIES: $(multimedia_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(multimediadir)" || $(MKDIR_P) "$(DESTDIR)$(multimediadir)" + @list='$(multimedia_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ + f=$(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(multimediaLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(multimediadir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(multimediaLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(multimediadir)/$$f"; \ + else :; fi; \ + done + +uninstall-multimediaLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(multimedia_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(multimediadir)/$$p'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(multimediadir)/$$p"; \ + done + +clean-multimediaLTLIBRARIES: + -test -z "$(multimedia_LTLIBRARIES)" || rm -f $(multimedia_LTLIBRARIES) + @list='$(multimedia_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +bt829_drv.la: $(bt829_drv_la_OBJECTS) $(bt829_drv_la_DEPENDENCIES) + $(bt829_drv_la_LINK) -rpath $(multimediadir) $(bt829_drv_la_OBJECTS) $(bt829_drv_la_LIBADD) $(LIBS) +fi1236_drv.la: $(fi1236_drv_la_OBJECTS) $(fi1236_drv_la_DEPENDENCIES) + $(fi1236_drv_la_LINK) -rpath $(multimediadir) $(fi1236_drv_la_OBJECTS) $(fi1236_drv_la_LIBADD) $(LIBS) +msp3430_drv.la: $(msp3430_drv_la_OBJECTS) $(msp3430_drv_la_DEPENDENCIES) + $(msp3430_drv_la_LINK) -rpath $(multimediadir) $(msp3430_drv_la_OBJECTS) $(msp3430_drv_la_LIBADD) $(LIBS) +tda8425_drv.la: $(tda8425_drv_la_OBJECTS) $(tda8425_drv_la_DEPENDENCIES) + $(tda8425_drv_la_LINK) -rpath $(multimediadir) $(tda8425_drv_la_OBJECTS) $(tda8425_drv_la_LIBADD) $(LIBS) +tda9850_drv.la: $(tda9850_drv_la_OBJECTS) $(tda9850_drv_la_DEPENDENCIES) + $(tda9850_drv_la_LINK) -rpath $(multimediadir) $(tda9850_drv_la_OBJECTS) $(tda9850_drv_la_LIBADD) $(LIBS) +tda9885_drv.la: $(tda9885_drv_la_OBJECTS) $(tda9885_drv_la_DEPENDENCIES) + $(tda9885_drv_la_LINK) -rpath $(multimediadir) $(tda9885_drv_la_OBJECTS) $(tda9885_drv_la_LIBADD) $(LIBS) +uda1380_drv.la: $(uda1380_drv_la_OBJECTS) $(uda1380_drv_la_DEPENDENCIES) + $(uda1380_drv_la_LINK) -rpath $(multimediadir) $(uda1380_drv_la_OBJECTS) $(uda1380_drv_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bt829.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bt829_module.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fi1236.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fi1236_module.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/msp3430.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/msp3430_module.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tda8425.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tda8425_module.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tda9850.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tda9850_module.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tda9885.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tda9885_module.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uda1380.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uda1380_module.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xf86i2c.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-sdkHEADERS: $(sdk_HEADERS) + @$(NORMAL_INSTALL) + test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)" + @list='$(sdk_HEADERS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \ + $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \ + done + +uninstall-sdkHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(sdk_HEADERS)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \ + rm -f "$(DESTDIR)$(sdkdir)/$$f"; \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(HEADERS) +installdirs: + for dir in "$(DESTDIR)$(multimediadir)" "$(DESTDIR)$(sdkdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool clean-multimediaLTLIBRARIES \ + clean-noinstLIBRARIES mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: install-multimediaLTLIBRARIES install-sdkHEADERS + +install-dvi: install-dvi-am + +install-exec-am: + +install-html: install-html-am + +install-info: install-info-am + +install-man: + +install-pdf: install-pdf-am + +install-ps: install-ps-am + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-multimediaLTLIBRARIES uninstall-sdkHEADERS + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-multimediaLTLIBRARIES \ + clean-noinstLIBRARIES ctags distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man \ + install-multimediaLTLIBRARIES install-pdf install-pdf-am \ + install-ps install-ps-am install-sdkHEADERS install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-multimediaLTLIBRARIES \ + uninstall-sdkHEADERS + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/xorg-server/hw/xfree86/i2c/bt829.c b/xorg-server/hw/xfree86/i2c/bt829.c new file mode 100644 index 000000000..3963ecf47 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/bt829.c @@ -0,0 +1,745 @@ +/* TODO: clean up/fix CC code */ + +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include +#include +#include + +#include "xf86.h" +#include "xf86i2c.h" +#include "bt829.h" +#include "i2c_def.h" + +/* Changing the following settings (especially VCROP) may */ +/* require modifying code that calls this driver. */ +#define HCROP 0 /* amount to crop from the left and right edges */ +#define VCROP 0 /* amount to crop from the top and bottom edges */ + +#define BTVERSION (bt->id>>4) + +#define H(X) ( ((X)>>8) & 0xFF ) +#define L(X) ( (X) & 0xFF ) + +#define LIMIT(X,A,B) (((X)<(A)) ? (A) : ((X)>(B)) ? (B) : (X) ) + +/* Bt829 family chip ID's */ +#define BT815 0x02 +#define BT817 0x06 +#define BT819 0x07 +#define BT827 0x0C +#define BT829 0x0E + +/* Bt829 registers */ +#define STATUS 0x00 /* Device Status */ +#define IFORM 0x01 /* Input Format */ +#define TDEC 0x02 /* Temporal Decimation */ +#define CROP 0x03 /* MSB Cropping */ +#define VDELAY_LO 0x04 /* Vertical Delay */ +#define VACTIVE_LO 0x05 /* Vertical Active */ +#define HDELAY_LO 0x06 /* Horizontal Delay */ +#define HACTIVE_LO 0x07 /* Horizontal Active */ +#define HSCALE_HI 0x08 /* Horizontal Scaling */ +#define HSCALE_LO 0x09 /* Horizontal Scaling */ +#define BRIGHT 0x0A /* Brightness Control */ +#define CONTROL 0x0B /* Miscellaneous Control */ +#define CONTRAST_LO 0x0C /* Luma Gain (Contrast) */ +#define SAT_U_LO 0x0D /* Chroma (U) Gain (Saturation) */ +#define SAT_V_LO 0x0E /* Chroma (V) Gain (Saturation) */ +#define HUE 0x0F /* Hue Control */ +#define SCLOOP 0x10 /* SC Loop Control */ +#define WC_UP 0x11 /* White Crush Up Count */ +#define OFORM 0x12 /* Output Format */ +#define VSCALE_HI 0x13 /* Vertical Scaling */ +#define VSCALE_LO 0x14 /* Vertical Scaling */ +#define TEST 0x15 /* Test Control */ +#define VPOLE 0x16 /* Video Timing Polarity */ +#define IDCODE 0x17 /* ID Code */ +#define ADELAY 0x18 /* AGC Delay */ +#define BDELAY 0x19 /* Burst Gate Delay */ +#define ADC 0x1A /* ADC Interface */ +#define VTC 0x1B /* Video Timing Control */ +#define CC_STATUS 0x1C /* Extended Data Services/Closed Capt Status */ +#define CC_DATA 0x1D /* Extended Data Services/Closed Capt Data */ +#define WC_DN 0x1E /* White Crush Down Count */ +#define SRESET 0x1F /* Software Reset */ +#define P_IO 0x3F /* Programmable I/O */ + +static CARD8 btread(BT829Ptr bt, CARD8 reg) +{ + CARD8 v; + + I2C_WriteRead(&(bt->d), ®, 1, &v, 1); + + return v; +} + +static void btwrite(BT829Ptr bt, CARD8 reg, CARD8 val) +{ + CARD8 data[2]; + + data[0] = reg; + data[1] = val; + I2C_WriteRead(&(bt->d), data, 2, NULL, 0); +} + +/* + * Register access + */ +static void btwrite_status(BT829Ptr bt) /* STATUS */ +{ + btwrite(bt, STATUS, 0x00); /* clear */ +} + +static void btwrite_iform(BT829Ptr bt) /* IFORM */ +{ + int xtsel; + + switch (bt->format) { + case BT829_NTSC: + case BT829_NTSC_JAPAN: + case BT829_PAL_M: + case BT829_PAL_N_COMB: /* gatos says xtsel = 2 */ + xtsel = 1; + break; + case BT829_PAL: + case BT829_PAL_N: + case BT829_SECAM: + xtsel = 2; + break; + default: /* shouldn't get here */ + xtsel = 3; /* hardware default */ + break; + } + + btwrite(bt, IFORM, (bt->mux<<5) | (xtsel<<3) | bt->format); +} + +static void btwrite_tdec(BT829Ptr bt) /* TDEC */ +{ + /* use default */ +} + +static void btwrite_crop(BT829Ptr bt) /* CROP */ +{ + btwrite(bt, CROP, (H(bt->vdelay)<<6) | (H(bt->vactive)<<4) | + (H(bt->hdelay)<<2) | H(bt->width)); +} + +static void btwrite_vdelay_lo(BT829Ptr bt) /* VDELAY_LO */ +{ + btwrite(bt, VDELAY_LO, L(bt->vdelay)); +} + +static void btwrite_vactive_lo(BT829Ptr bt) /* VACTIVE_LO */ +{ + btwrite(bt, VACTIVE_LO, L(bt->vactive)); +} + +static void btwrite_hdelay_lo(BT829Ptr bt) /* HDELAY_LO */ +{ + btwrite(bt, HDELAY_LO, L(bt->hdelay)); +} + +static void btwrite_hactive_lo(BT829Ptr bt) /* HACTIVE_LO */ +{ + btwrite(bt, HACTIVE_LO, L(bt->width)); +} + +static void btwrite_hscale_hi(BT829Ptr bt) /* HSCALE_HI */ +{ + btwrite(bt, HSCALE_HI, H(bt->hscale)); +} + +static void btwrite_hscale_lo(BT829Ptr bt) /* HSCALE_LO */ +{ + btwrite(bt, HSCALE_LO, L(bt->hscale)); +} + +static void btwrite_bright(BT829Ptr bt) /* BRIGHT */ +{ + btwrite(bt, BRIGHT, bt->brightness); +} + +static void btwrite_control(BT829Ptr bt) /* CONTROL */ +{ + int ldec; + + /* The data sheet says ldec should always be 0 for SECAM */ + /* but the picture quality is better with ldec = 1 */ + ldec = (bt->width > 360); /* gatos says 384 */ + + btwrite(bt, CONTROL, + ((bt->mux==bt->svideo_mux) ? 0xC0:0x00) | /* LNOTCH and COMP */ + (ldec<<5) | (H(bt->contrast)<<2) | (H(bt->sat_u)<<1) | H(bt->sat_v)); +} + +static void btwrite_contrast_lo(BT829Ptr bt) /* CONTRAST_LO */ +{ + btwrite(bt, CONTRAST_LO, L(bt->contrast)); +} + +static void btwrite_sat_u_lo(BT829Ptr bt) /* SAT_U_LO */ +{ + btwrite(bt, SAT_U_LO, L(bt->sat_u)); +} + +static void btwrite_sat_v_lo(BT829Ptr bt) /* SAT_V_LO */ +{ + btwrite(bt, SAT_V_LO, L(bt->sat_v)); +} + +static void btwrite_hue(BT829Ptr bt) /* HUE */ +{ + btwrite(bt, HUE, bt->hue); +} + +static void btwrite_scloop(BT829Ptr bt) /* SCLOOP */ +{ + if (BTVERSION >= BT827) { + btwrite(bt, SCLOOP, + (bt->format==BT829_SECAM) ? 0x10:0x00 /* QCIF or AUTO */ + ); + } +} + +static void btwrite_wc_up(BT829Ptr bt) /* WC_UP */ +{ + if (BTVERSION >= BT827) { + /* use default */ + } +} + +static void btwrite_oform(BT829Ptr bt) /* OFORM */ +{ + btwrite(bt, OFORM, (bt->code<<3) | (bt->len<<2) | + 0x02 /* RANGE = 0, CORE = 0, VBI_FRAME = 0, OES = 2 (default) */ + ); +} + +static void btwrite_vscale_hi(BT829Ptr bt) /* VSCALE_HI */ +{ + btwrite(bt, VSCALE_HI, H(bt->vscale) | + 0x60 /* YCOMB = 0, COMB = 1, INT = 1 (default) */ + ); +} + +static void btwrite_vscale_lo(BT829Ptr bt) /* VSCALE_LO */ +{ + btwrite(bt, VSCALE_LO, L(bt->vscale)); +} + +/* TEST should not be written to */ + +static void btwrite_vpole(BT829Ptr bt) /* VPOLE */ +{ + btwrite(bt, VPOLE, (bt->out_en<<7)); +} + +/* IDCODE is read only */ + +static void btwrite_adelay(BT829Ptr bt) /* ADELAY */ +{ + switch (bt->format) { + case BT829_NTSC: + case BT829_NTSC_JAPAN: + case BT829_PAL_M: + btwrite(bt, ADELAY, 104); + break; + case BT829_PAL: + case BT829_PAL_N: + case BT829_SECAM: + case BT829_PAL_N_COMB: + btwrite(bt, ADELAY, 127); + break; + default: /* shouldn't get here */ + btwrite(bt, ADELAY, 104); /* hardware default */ + break; + } +} + +static void btwrite_bdelay(BT829Ptr bt) /* BDELAY */ +{ + switch (bt->format) { + case BT829_NTSC: + case BT829_NTSC_JAPAN: + case BT829_PAL_M: + btwrite(bt, BDELAY, 93); + break; + case BT829_PAL: + case BT829_PAL_N: + case BT829_PAL_N_COMB: + btwrite(bt, BDELAY, 114); + break; + case BT829_SECAM: + btwrite(bt, BDELAY, 160); + break; + default: /* shouldn't get here */ + btwrite(bt, BDELAY, 93); /* hardware default */ + break; + } +} + +static void btwrite_adc(BT829Ptr bt) /* ADC */ +{ + btwrite(bt, ADC, bt->mux==bt->svideo_mux ? 0x80:0x82); /* CSLEEP = 0 or 1 */ +} + +static void btwrite_vtc(BT829Ptr bt) /* VTC */ +{ + int vfilt = 0; /* hardware default */ + + if (BTVERSION > BT827) { /* gatos says >= BT827 */ + switch (bt->format) { + case BT829_NTSC: + case BT829_NTSC_JAPAN: + case BT829_PAL_M: + case BT829_PAL_N_COMB: /* gatos groups with BT829_PAL */ + if (bt->width <= 360) vfilt = 1; /* gatos says <= 240 */ + if (bt->width <= 180) vfilt = 2; /* gatos says <= 120 */ + if (bt->width <= 90) vfilt = 3; /* gatos says <= 60 */ + break; + case BT829_PAL: + case BT829_PAL_N: + case BT829_SECAM: + if (bt->width <= 384) vfilt = 1; + if (bt->width <= 192) vfilt = 2; + if (bt->width<= 96) vfilt = 3; + break; + default: /* shouldn't get here */ + break; /* use hardware default */ + } + btwrite(bt, VTC, (bt->vbien<<4) | (bt->vbifmt<<3) | vfilt); + } +} + +static void btwrite_cc_status(BT829Ptr bt) /* CC_STATUS */ +{ /* FIXME: ATI specific */ + if (BTVERSION >= BT827) { + if (bt->ccmode == 0) btwrite(bt, CC_STATUS, 0x00); + /* 0x40 is activate to set the CCVALID line. Not required yet */ + else btwrite(bt, CC_STATUS, (bt->ccmode<<4) | 0x40); + } +} + +/* CC_DATA is read only */ + +static void btwrite_wc_dn(BT829Ptr bt) /* WC_DN */ +{ + if (BTVERSION >= BT827) { + /* use default */ + } +} + +static void bt_reset(BT829Ptr bt) { /* SRESET */ + btwrite(bt, SRESET, 0x0); /* Reset all registers */ +} + +static void btwrite_p_io(BT829Ptr bt) /* P_IO */ +{ + if (BTVERSION >= BT827) { + btwrite(bt, P_IO, bt->p_io); + } +} + +/* + * Deal with dependencies + */ +static void propagate_changes(BT829Ptr bt) +{ + CARD16 hdelay, unscaled_hdelay, vdelay, hscale, vscale; + int htotal, vactive; + + switch (bt->format) { + case BT829_NTSC: + case BT829_NTSC_JAPAN: + case BT829_PAL_M: + vdelay = 22; + htotal = 754; + vactive = 480; + unscaled_hdelay = 135; + break; + case BT829_PAL: + case BT829_PAL_N: + vdelay = (bt->tunertype==5) ? 34 : 22; + htotal = 922; + vactive = 576; + unscaled_hdelay = 186; + break; + case BT829_SECAM: + vdelay = 34; + htotal = 922; + vactive = 576; + unscaled_hdelay = 186; + break; + case BT829_PAL_N_COMB: + vdelay = (bt->tunertype==5) ? 34 : 22; /* windows says 22 */ + htotal = 754; /* gatos and windows say 922 */ + vactive = 576; + unscaled_hdelay = 135; /* gatos and windows say 186 */ + break; + default: /* shouldn't get here */ + vdelay = 22; /* hardware default */ + htotal = 754; + vactive = 480; /* hardware default */ + unscaled_hdelay = 135; + break; + } + + bt->htotal = htotal; /* Used for error checking in bt829_SetCaptSize */ + + hscale = 4096 * htotal / (bt->width + 2 * HCROP)-4096; + hdelay = ( + HCROP + (bt->width + 2 * HCROP) * unscaled_hdelay / htotal + ) & 0x3FE; + + vactive = vactive - 2 * VCROP; + vdelay = vdelay + VCROP; + vscale = (0x10000 - (512*vactive/bt->height-512)) & 0x1FFF; + + if ((hdelay != bt->hdelay) || (vdelay != bt->vdelay) || + (vactive != bt->vactive) || (hscale != bt->hscale) || + (vscale != bt->vscale)) { + bt->hdelay = hdelay; + bt->vdelay = vdelay; + bt->vactive = vactive; + bt->hscale = hscale; + bt->vscale = vscale; + btwrite_crop(bt); + btwrite_vdelay_lo(bt); + btwrite_vactive_lo(bt); + btwrite_hdelay_lo(bt); + btwrite_hscale_hi(bt); + btwrite_hscale_lo(bt); + btwrite_control(bt); + btwrite_vscale_hi(bt); + btwrite_vscale_lo(bt); + } +} + +static void write_all(BT829Ptr bt) +{ + bt_reset(bt); + propagate_changes(bt); /* ensure consistency */ + btwrite_iform(bt); + btwrite_tdec(bt); + btwrite_crop(bt); + btwrite_vdelay_lo(bt); + btwrite_vactive_lo(bt); + btwrite_hdelay_lo(bt); + btwrite_hactive_lo(bt); + btwrite_hscale_hi(bt); + btwrite_hscale_lo(bt); + btwrite_bright(bt); + btwrite_control(bt); + btwrite_contrast_lo(bt); + btwrite_sat_u_lo(bt); + btwrite_sat_v_lo(bt); + btwrite_hue(bt); + btwrite_scloop(bt); + btwrite_wc_up(bt); + btwrite_oform(bt); + btwrite_vscale_hi(bt); + btwrite_vscale_lo(bt); + btwrite_vpole(bt); + btwrite_adelay(bt); + btwrite_bdelay(bt); + btwrite_adc(bt); + btwrite_vtc(bt); +/* btwrite_cc_status(bt); */ /* FIXME: CC code needs cleaning */ + btwrite_wc_dn(bt); + btwrite_p_io(bt); +} + +/* + * Public functions + */ +BT829Ptr bt829_Detect(I2CBusPtr b, I2CSlaveAddr addr) +{ + BT829Ptr bt; + I2CByte a; + + bt = xcalloc(1, sizeof(BT829Rec)); + if(bt == NULL) return NULL; + bt->d.DevName = strdup("BT829 video decoder"); + bt->d.SlaveAddr = addr; + bt->d.pI2CBus = b; + bt->d.NextDev = NULL; + bt->d.StartTimeout = b->StartTimeout; + bt->d.BitTimeout = b->BitTimeout; + bt->d.AcknTimeout = b->AcknTimeout; + bt->d.ByteTimeout = b->ByteTimeout; + + + if(!I2C_WriteRead(&(bt->d), NULL, 0, &a, 1)) + { + free(bt); + return NULL; + } + + bt->id = btread(bt,IDCODE); + + free(bt->d.DevName); + bt->d.DevName = xcalloc(200, sizeof(char)); + switch(BTVERSION){ + case BT815: + sprintf(bt->d.DevName, "bt815a video decoder, revision %d",bt->id & 0xf); + break; + case BT817: + sprintf(bt->d.DevName, "bt817a video decoder, revision %d",bt->id & 0xf); + break; + case BT819: + sprintf(bt->d.DevName, "bt819a video decoder, revision %d",bt->id & 0xf); + break; + case BT827: + sprintf(bt->d.DevName, "bt827a/b video decoder, revision %d",bt->id & 0xf); + break; + case BT829: + sprintf(bt->d.DevName, "bt829a/b video decoder, revision %d",bt->id & 0xf); + break; + default: + sprintf(bt->d.DevName, "bt8xx/unknown video decoder version %d, revision %d",bt->id >> 4,bt->id & 0xf); + break; + } + + /* set default parameters */ + if(!I2CDevInit(&(bt->d))) + { + free(bt); + return NULL; + } + + bt->tunertype = 1; + + bt->brightness = 0; /* hardware default */ + bt->ccmode = 0; + bt->code = 0; /* hardware default */ + bt->contrast = 216; /* hardware default */ + bt->format = BT829_NTSC; + bt->height = 480; /* hardware default for vactive */ + bt->hue = 0; /* hardware default */ + bt->len = 1; /* hardware default */ + bt->mux = BT829_MUX0; /* hardware default */ + bt->out_en = 0; /* hardware default */ + bt->p_io = 0; /* hardware default */ + bt->sat_u = 254; /* hardware default */ + bt->sat_v = 180; /* hardware default */ + bt->vbien = 0; /* hardware default */ + bt->vbifmt = 0; /* hardware default */ + bt->width = 640; /* hardware default for hactive */ + + bt->hdelay = 120; /* hardware default */ + bt->hscale = 684; /* hardware default */ + bt->vactive = 480; /* hardware default */ + bt->vdelay = 22; /* hardware default */ + bt->vscale = 0; /* hardware default */ + + bt->htotal = 754; /* NTSC */ + bt->svideo_mux = 0; /* no s-video */ + + return bt; +} + +int bt829_ATIInit(BT829Ptr bt) +{ + bt->code = 1; + bt->len = 0; + bt->vbien = 1; + bt->vbifmt = 1; + bt->svideo_mux = BT829_MUX1; + + write_all (bt); + + return 0; +} + +int bt829_SetFormat(BT829Ptr bt, CARD8 format) +{ + if ((format < 1) || (format > 7)) return -1; + if ((BTVERSION <= BT819) && + (format != BT829_NTSC) && (format != BT829_PAL)) return -1; + if (format == bt->format) return 0; + bt->format = format; + propagate_changes(bt); + btwrite_iform(bt); + btwrite_scloop(bt); + btwrite_adelay(bt); + btwrite_bdelay(bt); + btwrite_vtc(bt); + return 0; +} + +int bt829_SetMux(BT829Ptr bt, CARD8 mux) +{ + if ((mux < 1) || (mux > 3)) return -1; + if (mux == bt->mux) return 0; + bt->mux = mux; + /* propagate_changes(bt); */ /* no dependencies */ + btwrite_iform(bt); + btwrite_control(bt); + btwrite_adc(bt); + return 0; +} + +void bt829_SetBrightness(BT829Ptr bt, int brightness) +{ + brightness = LIMIT(brightness,-1000,999); /* ensure -128 <= brightness <= 127 below */ + brightness = (128*brightness)/1000; + if (brightness == bt->brightness) return; + bt->brightness = brightness; + /* propagate_changes(bt); */ /* no dependencies */ + btwrite_bright(bt); +} + +void bt829_SetContrast(BT829Ptr bt, int contrast) +{ + contrast = LIMIT(contrast,-1000,1000); + contrast = (216*(contrast+1000))/1000; + if (contrast == bt->contrast) return; + bt->contrast = contrast; + /* propagate_changes(bt); */ /* no dependencies */ + btwrite_control(bt); + btwrite_contrast_lo(bt); +} + +void bt829_SetSaturation(BT829Ptr bt, int saturation) +{ + CARD16 sat_u, sat_v; + + saturation = LIMIT(saturation,-1000,1000); + sat_u = (254*(saturation+1000))/1000; + sat_v = (180*(saturation+1000))/1000; + if ((sat_u == bt->sat_u) && (sat_v == bt->sat_v)) return; + bt->sat_u = sat_u; + bt->sat_v = sat_v; + /* propagate_changes(bt); */ /* no dependencies */ + btwrite_control(bt); + btwrite_sat_u_lo(bt); + btwrite_sat_v_lo(bt); +} + +void bt829_SetTint(BT829Ptr bt, int hue) +{ + hue = LIMIT(hue,-1000,999); /* ensure -128 <= hue <= 127 below */ + hue = (128*hue)/1000; + if (hue == bt->hue) return; + bt->hue = hue; + /* propagate_changes(bt); */ /* no dependencies */ + btwrite_hue(bt); +} + +int bt829_SetCaptSize(BT829Ptr bt, int width, int height) +{ + if ((width > bt->htotal - 2 * HCROP) || + (16 * width < bt->htotal - 32 * HCROP)) return -1; + if ((height > bt->vactive) || (16 * height < bt->vactive)) return -1; + if ((width == bt->width) && (height == bt->height)) return 0; + bt->width = width; + bt->height = height; + propagate_changes(bt); + btwrite_crop(bt); + btwrite_hactive_lo(bt); + btwrite_control(bt); + btwrite_vtc(bt); + return 0; +} + +int bt829_SetCC(BT829Ptr bt) /* FIXME: should take ccmode as a parameter */ +{ + if (BTVERSION < BT827) return -1; /* can't do it */ + /* propagate_changes(bt); */ /* no dependencies */ + btwrite_cc_status(bt); + /* we write to STATUS to reset the CCVALID flag */ + if (bt->ccmode != 0) btwrite_status(bt); + return 0; +} + +void bt829_SetOUT_EN(BT829Ptr bt, BOOL out_en) +{ + out_en = (out_en != 0); + if (out_en == bt->out_en) return; + bt->out_en = out_en; + /* propagate_changes(bt); */ /* no dependencies */ + btwrite_vpole(bt); +} + +void bt829_SetP_IO(BT829Ptr bt, CARD8 p_io) +{ + if (p_io == bt->p_io) return; + bt->p_io = p_io; + /* propagate_changes(bt); */ /* no dependencies */ + btwrite_p_io(bt); +} + +#define BTREAD(R) btread(bt,(R)) + +#if 0 + +void bt829_getCCdata(BT829Ptr bt,struct CCdata *data) +{ + CARD8 status; + data->num_valid=0; + /* wait for buffer to be half full (means 8/16 bytes) + * either 4 (one of CC/EDS) or 2 (both CC/EDS) frames */ + if(!(BTREAD(STATUS)&0x04)) return; /* could comment this line */ + for(;data->num_validnum_valid++) { + status=BTREAD(CC_STATUS); + if(!(status&0x04)) break; + data->data[data->num_valid]= BTREAD(CC_DATA)&0x7f; + /* stripped high bit (parity) */ + data->status[data->num_valid]= (CCS_EDS*((status&0x02)>>1)) | + (CCS_HIGH*(status&0x01)) | + (CCS_OVER*((status&0x08)>>3)) | + (CCS_PAR*((status&0x80)>>7)) ; } + btwrite(bt,STATUS,0x00); /* Reset CCVALID status bit */ + return; +} + +#endif + +/* ------------------------------------------------------------------------ */ +/* Debug and report routines */ + +#define DUMPREG(REG) \ + xf86DrvMsg(bt->d.pI2CBus->scrnIndex,X_INFO," %-12s (0x%02X) = 0x%02X\n", \ + #REG,REG,BTREAD(REG)) + +/*static void bt829_dumpregs(BT829Ptr bt) +{ + DUMPREG(STATUS); + DUMPREG(IFORM); + DUMPREG(TDEC); + DUMPREG(CROP); + DUMPREG(VDELAY_LO); + DUMPREG(VACTIVE_LO); + DUMPREG(HDELAY_LO); + DUMPREG(HACTIVE_LO); + DUMPREG(HSCALE_HI); + DUMPREG(HSCALE_LO); + DUMPREG(BRIGHT); + DUMPREG(CONTROL); + DUMPREG(CONTRAST_LO); + DUMPREG(SAT_U_LO); + DUMPREG(SAT_V_LO); + DUMPREG(HUE); + if (BTVERSION >= BT827) { + DUMPREG(SCLOOP); + DUMPREG(WC_UP) ; } + DUMPREG(OFORM); + DUMPREG(VSCALE_HI); + DUMPREG(VSCALE_LO); + DUMPREG(TEST); + DUMPREG(VPOLE); + DUMPREG(IDCODE); + DUMPREG(ADELAY); + DUMPREG(BDELAY); + DUMPREG(ADC); + if (BTVERSION >= BT827) { + DUMPREG(VTC); + DUMPREG(CC_STATUS); + DUMPREG(CC_DATA); + DUMPREG(WC_DN); + DUMPREG(P_IO) ; } +}*/ diff --git a/xorg-server/hw/xfree86/i2c/bt829.h b/xorg-server/hw/xfree86/i2c/bt829.h new file mode 100644 index 000000000..bca9d37de --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/bt829.h @@ -0,0 +1,97 @@ +#ifndef __BT829_H__ +#define __BT829_H__ + +#include "xf86i2c.h" + +typedef struct { + int tunertype; /* Must be set before init */ + /* Private variables */ + I2CDevRec d; + + CARD8 brightness; + CARD8 ccmode; + CARD8 code; + CARD16 contrast; + CARD8 format; + int height; + CARD8 hue; + CARD8 len; + CARD8 mux; + CARD8 out_en; + CARD8 p_io; + CARD16 sat_u; + CARD16 sat_v; + CARD8 vbien; + CARD8 vbifmt; + int width; + + CARD16 hdelay; + CARD16 hscale; + CARD16 vactive; + CARD16 vdelay; + CARD16 vscale; + + CARD16 htotal; + CARD8 id; + CARD8 svideo_mux; +} BT829Rec, *BT829Ptr; + +BT829Ptr bt829_Detect(I2CBusPtr b, I2CSlaveAddr addr); + +/* ATI card specific initialization */ +#define BT829_ATI_ADDR_1 0x8A +#define BT829_ATI_ADDR_2 0x88 +int bt829_ATIInit(BT829Ptr bt); + +#define BT829_NTSC 1 /* NTSC-M */ +#define BT829_NTSC_JAPAN 2 /* NTSC-Japan */ +#define BT829_PAL 3 /* PAL-B,D,G,H,I */ +#define BT829_PAL_M 4 /* PAL-M */ +#define BT829_PAL_N 5 /* PAL-N */ +#define BT829_SECAM 6 /* SECAM */ +#define BT829_PAL_N_COMB 7 /* PAL-N combination */ +int bt829_SetFormat(BT829Ptr bt, CARD8 format); + +#define BT829_MUX2 1 /* ATI -> composite video */ +#define BT829_MUX0 2 /* ATI -> tv tuner */ +#define BT829_MUX1 3 /* ATI -> s-video */ +int bt829_SetMux(BT829Ptr bt, CARD8 mux); + +int bt829_SetCaptSize(BT829Ptr bt, int width, int height); + +void bt829_SetBrightness(BT829Ptr bt, int brightness); +void bt829_SetContrast(BT829Ptr bt, int contrast); +void bt829_SetSaturation(BT829Ptr bt, int saturation); +void bt829_SetTint(BT829Ptr bt, int hue); /* Hue */ + +void bt829_SetOUT_EN(BT829Ptr bt, BOOL out_en); /* VPOLE register */ +void bt829_SetP_IO(BT829Ptr bt, CARD8 p_io); /* P_IO register */ + +int bt829_SetCC(BT829Ptr bt); + +#define BT829SymbolsList \ + "bt829_Detect", \ + "bt829_ATIInit", \ + "bt829_SetFormat", \ + "bt829_SetMux", \ + "bt829_SetBrightness", \ + "bt829_SetContrast", \ + "bt829_SetSaturation", \ + "bt829_SetTint", \ + "bt829_SetCaptSize", \ + "bt829_SetOUT_EN", \ + "bt829_SetP_IO" + +#define xf86_bt829_Detect ((BT829Ptr (*)(I2CBusPtr, I2CSlaveAddr))LoaderSymbol("bt829_Detect")) +#define xf86_bt829_ATIInit ((int (*)(BT829Ptr))LoaderSymbol("bt829_ATIInit")) +#define xf86_bt829_SetFormat ((int (*)(BT829Ptr, CARD8))LoaderSymbol("bt829_SetFormat")) +#define xf86_bt829_SetMux ((int (*)(BT829Ptr, CARD8))LoaderSymbol("bt829_SetMux")) +#define xf86_bt829_SetCaptSize ((int (*)(BT829Ptr, int, int))LoaderSymbol("bt829_SetCaptSize")) +#define xf86_bt829_SetBrightness ((void (*)(BT829Ptr, int))LoaderSymbol("bt829_SetBrightness")) +#define xf86_bt829_SetContrast ((void (*)(BT829Ptr, int))LoaderSymbol("bt829_SetContrast")) +#define xf86_bt829_SetSaturation ((void (*)(BT829Ptr, int))LoaderSymbol("bt829_SetSaturation")) +#define xf86_bt829_SetTint ((void (*)(BT829Ptr, int))LoaderSymbol("bt829_SetTint")) +#define xf86_bt829_SetOUT_EN ((void (*)(BT829Ptr, Bool))LoaderSymbol("bt829_SetOUT_EN")) +#define xf86_bt829_SetP_IO ((void (*)(BT829Ptr, CARD8))LoaderSymbol("bt829_SetP_IO")) + +#endif diff --git a/xorg-server/hw/xfree86/i2c/bt829_module.c b/xorg-server/hw/xfree86/i2c/bt829_module.c new file mode 100644 index 000000000..c885b8e10 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/bt829_module.c @@ -0,0 +1,28 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86Module.h" + +static MODULESETUPPROTO(bt829Setup); + +static XF86ModuleVersionInfo bt829VersRec = +{ + "bt829", + MODULEVENDORSTRING, + MODINFOSTRING1, + MODINFOSTRING2, + XORG_VERSION_CURRENT, + 1, 0, 0, + ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ + ABI_VIDEODRV_VERSION, + MOD_CLASS_NONE, + {0,0,0,0} +}; + +_X_EXPORT XF86ModuleData bt829ModuleData = { &bt829VersRec, bt829Setup, NULL }; + +static pointer +bt829Setup(pointer module, pointer opts, int *errmaj, int *errmin) { + return (pointer)1; +} diff --git a/xorg-server/hw/xfree86/i2c/fi1236.c b/xorg-server/hw/xfree86/i2c/fi1236.c new file mode 100644 index 000000000..110563ed9 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/fi1236.c @@ -0,0 +1,609 @@ + +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include +#include +#include +#include + +#include "xf86.h" +#include "xf86i2c.h" +#include "fi1236.h" +#include "tda9885.h" +#include "i2c_def.h" + +#define NUM_TUNERS 8 + +const FI1236_parameters tuner_parms[NUM_TUNERS] = +{ + /* 0 - FI1236 */ + { 733 ,884 ,12820 ,2516 ,7220 ,0xA2 ,0x94, 0x34, 0x8e }, + /* !!!based on documentation - it should be: + {733 ,16*55.25 ,16*801.25 ,16*160 ,16*454 ,0xA0 ,0x90, 0x30, 0x8e},*/ + + /* 1 - FI1216 */ + { 623 ,16*48.75 ,16*855.25 ,16*170 ,16*450 ,0xA0 ,0x90, 0x30, 0x8e }, + /* 2 - TEMIC FN5AL */ + { 623 ,16*45.75 ,16*855.25 ,16*169 ,16*454 ,0xA0 ,0x90, 0x30, 0x8e }, + /* 3 - MT2032.. */ + { 733 ,768 ,13760 , 0 , 0 , 0 , 0, 0, 0 }, + /* 4 - FI1246 */ + { 623 ,16*45.75 ,16*855.25 ,16*170 ,16*450 ,0xA0 ,0x90, 0x30, 0x8e }, + /* 5 - FI1256 */ + { 623 ,16*49.75 ,16*863.25 ,16*170 ,16*450 ,0xA0 ,0x90, 0x30, 0x8e }, + /* 6 - FI1236W */ + /*{ 733 ,884 ,12820 ,2516 ,7220 ,0x1 ,0x2, 0x4, 0x8e },*/ + { 732, 16*55.25, 16*801.25, 16*160, 16*442, 0x1, 0x2, 0x4, 0x8e }, + /* 7 - FM1216ME */ + { 623 ,16*48.25 ,16*863.25 ,16*158.00 ,16*442.00 ,0x1 ,0x2, 0x4, 0x8e } +}; + + +FI1236Ptr Detect_FI1236(I2CBusPtr b, I2CSlaveAddr addr) +{ + FI1236Ptr f; + I2CByte a; + + f = xcalloc(1,sizeof(FI1236Rec)); + if(f == NULL) return NULL; + f->d.DevName = strdup("FI12xx Tuner"); + f->d.SlaveAddr = addr; + f->d.pI2CBus = b; + f->d.NextDev = NULL; + f->d.StartTimeout = b->StartTimeout; + f->d.BitTimeout = b->BitTimeout; + f->d.AcknTimeout = b->AcknTimeout; + f->d.ByteTimeout = b->ByteTimeout; + f->type=TUNER_TYPE_FI1236; + f->afc_timer_installed=FALSE; + f->last_afc_hint=TUNER_OFF; + f->video_if=45.7812; + + if(!I2C_WriteRead(&(f->d), NULL, 0, &a, 1)) + { + free(f); + return NULL; + } + FI1236_set_tuner_type(f, TUNER_TYPE_FI1236); + if(!I2CDevInit(&(f->d))) + { + free(f); + return NULL; + } + return f; +} + +static void MT2032_dump_parameters(FI1236Ptr f, MT2032_parameters *m) +{ +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: input f_rf=%g f_if1=%g f_if2=%g f_ref=%g f_ifbw=%g f_step=%g\n", + m->f_rf, m->f_if1, m->f_if2, m->f_ref, m->f_ifbw, m->f_step); + +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: computed f_lo1=%g f_lo2=%g LO1I=%d LO2I=%d SEL=%d STEP=%d NUM=%d\n", + m->f_lo1, m->f_lo2, m->LO1I, m->LO2I, m->SEL, m->STEP, m->NUM); +} + + +static void MT2032_getid(FI1236Ptr f) +{ +CARD8 out[4]; +CARD8 in; + +in=0x11; +I2C_WriteRead(&(f->d), (I2CByte *)&in, 1, out, 4); +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: Company code 0x%02x%02x, part code 0x%02x, revision code 0x%02x\n", + out[0], out[1], out[2], out[3]); + +} + +/* might be buggy */ +#if 0 +static void MT2032_shutdown(FI1236Ptr f) +{ +CARD8 data[10]; + +data[0]=0x00; /* start with register 0x00 */ +data[1]=0x1A; +data[2]=0x44; +data[3]=0x20; + +I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0); + +data[0]=0x05; /* now start with register 0x05 */ +data[1]=0xD7; +data[2]=0x14; +data[3]=0x05; +I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0); + +data[0]=0x0B; /* now start with register 0x05 */ +data[1]=0x8F; +data[2]=0x07; +data[3]=0x43; +I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0); + +usleep(15000); +} +#endif + +static void MT2032_dump_status(FI1236Ptr f); + +static void MT2032_init(FI1236Ptr f) +{ +CARD8 data[10]; +CARD8 value; +CARD8 xogc = 0x00; + +MT2032_getid(f); + +data[0]=0x02; /* start with register 0x02 */ +data[1]=0xFF; +data[2]=0x0F; +data[3]=0x1F; + +I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0); + +data[0]=0x06; /* now start with register 0x06 */ +data[1]=0xE4; +data[2]=0x8F; +data[3]=0xC3; +data[4]=0x4E; +data[5]=0xEC; +I2C_WriteRead(&(f->d), (I2CByte *)data, 6, NULL, 0); + +data[0]=0x0d; /* now start with register 0x0d */ +data[1]=0x32; +I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0); + +while(1) { + usleep(15000); /* wait 15 milliseconds */ + + data[0]=0x0e; /* register number 7, status */ + value=0xFF; + if(!I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1)) + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: failed to read XOK\n"); + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: XOK=%d\n", value & 0x01); + if(value & 1) break; + + data[0]=0x07; + if(!I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1)) + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: failed to read XOGC\n"); + + xogc=value & 0x7; + if(xogc==4){ + break; /* XOGC has reached 4.. stop */ + } + xogc--; + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: try XOGC=%d\n", xogc); + usleep(15000); + data[0]=0x07; /* register number 7, control byte 2 */ + data[1]=0x08 | xogc; + I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0); + } +f->xogc=xogc; +/* wait before continuing */ +usleep(15000); /* wait 50 milliseconds */ +MT2032_dump_status(f); +} + +static int MT2032_no_spur_in_band(MT2032_parameters *m) +{ +int n_max, n1, n2; +double f_test; +n_max=5; +n1=1; +while(1){ + n2=-n1; + f_test=n1*(m->f_lo1-m->f_lo2); + while(1){ + n2--; + f_test=f_test-m->f_lo2; + xf86DrvMsg(0, X_INFO, "testing f_test=%g n1=%d n2=%d f_lo1=%g f_lo2=%g f_if2=%g\n", f_test, n1, n2, m->f_lo1, m->f_lo2, m->f_if2); + xf86DrvMsg(0, X_INFO, "d_f=%g f_ifbw=%g\n",fabs(fabs(f_test)-m->f_if2), m->f_ifbw); + if((fabs(fabs(f_test)-m->f_if2)*2.0)<=m->f_ifbw)return 0; + if(n2<=-n_max)break; + /* this line in the manual is bogus. I say it is faster + and more correct to go over all harmonics.. */ + #if 0 + if(f_test<(m->f_lo2-m->f_if2-m->f_ifbw))break; + #endif + } + n1++; + if(n1>=n_max)return 1; + } + +} + +static void MT2032_calculate_register_settings(MT2032_parameters *m, double f_rf, double f_if1, double f_if2, double f_ref, double f_ifbw, double f_step) +{ +int n; +m->f_rf=f_rf; +m->f_if1=f_if1; +m->f_if2=f_if2; +m->f_ref=f_ref; +m->f_ifbw=f_ifbw; +m->f_step=f_step; + +m->f_lo1=f_rf+f_if1; +m->LO1I=(int)floor((m->f_lo1/f_ref)+0.5); +m->f_lo1=f_ref*m->LO1I; + +m->f_lo2=m->f_lo1-f_rf-f_if2; + +/* check for spurs */ +n=1; +while(n<3){ + if(MT2032_no_spur_in_band(m))break; + if(m->f_lo1<(f_rf+f_if1)){ + m->LO1I+=n; + } else { + m->LO1I-=n; + } + m->f_lo1=m->LO1I*f_ref; + m->f_lo2=m->f_lo1-f_rf-f_if2; + n++; + } +/* xf86DrvMsg(0, X_INFO, "MT2032: n=%d\n", n); */ +/* select VCO */ + +/* m->f_lo1>1100.0 */ +if(m->f_lo1<1370.0)m->SEL=4; + else +if(m->f_lo1<1530.0)m->SEL=3; + else +if(m->f_lo1<1720.0)m->SEL=2; + else +if(m->f_lo1<1890.0)m->SEL=1; + else /* m->f_lo1 < 1958.0 */ + m->SEL=0; + +/* calculate the rest of the registers */ +m->LO2I=(int)floor(m->f_lo2/f_ref); +m->STEP=(int)floor(3780.0*f_step/f_ref); +m->NUM=(int)floor(3780.0*(m->f_lo2/f_ref-m->LO2I)); +m->NUM=m->STEP*(int)floor((1.0*m->NUM)/(1.0*m->STEP)+0.5); +} + +static int MT2032_wait_for_lock(FI1236Ptr f) +{ +int n; +CARD8 data[10]; +CARD8 value; + +n=12; +while(1){ + data[0]=0x0e; /* register number 7, status */ + I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1); +/* xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: LO1LK=%d LO2LK=%d\n", (value & 0x04)>>2, (value & 0x02)>>1); */ + if((value & 6)==6) break; + usleep(1500); + n--; + if(n<0)break; + } +if(n<0){ + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: failed to set frequency\n"); + return 0; + } +return 1; +} + +static void MT2032_implement_settings(FI1236Ptr f, MT2032_parameters *m) +{ +CARD8 data[10]; +CARD8 value; + +data[0]=0x00; /* start with register 0x00 */ +data[1]=(m->LO1I>>3)-1; +data[2]=(m->SEL<<4)|(m->LO1I & 0x7); +data[3]=0x86; +I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0); + +data[0]=0x05; /* start with register 0x05 */ +data[1]=((m->LO2I & 0x7)<<5)|((m->LO2I>>3)-1); +if(m->f_rf<400.0)data[2]=0xe4; + else data[2]=0xf4; +I2C_WriteRead(&(f->d), (I2CByte *)data, 3, NULL, 0); + +data[0]=0x07; /* register number 7, control byte 2 */ +I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1); +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: using XOGC=%d\n", (value & 0x07)); +data[1]=8 | (value & 0x7); +I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0); + +data[0]=0x0b; /* start with register 0x0b */ +data[1]=m->NUM & 0xff; +data[2]=(1<<7)|((m->NUM >> 8) & 0x0f); +I2C_WriteRead(&(f->d), (I2CByte *)data, 3, NULL, 0); + +MT2032_wait_for_lock(f); +} + +static void MT2032_optimize_VCO(FI1236Ptr f, MT2032_parameters *m) +{ +CARD8 data[10]; +CARD8 value; +CARD8 TAD1; + +data[0]=0x0f; /* register number 7, status */ +I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1); +TAD1=value & 0x07; +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: TAD1=%d SEL=%d\n", TAD1, m->SEL); +if(TAD1 < 2)return; +if(TAD1==2){ + if(m->SEL==0)return; + m->SEL--; + } else { + if(m->SEL>=4)return; + m->SEL++; + } +data[0]=0x01; /* start with register 1 */ +data[1]=(m->SEL<<4)|(m->LO1I & 0x7); +I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0); + +} + +static int FI1236_get_afc_hint(FI1236Ptr f) +{ + CARD8 out; + CARD8 AFC; + + if ((f->type == TUNER_TYPE_FM1216ME) || (f->type == TUNER_TYPE_FI1236W)) + { + TDA9885Ptr t = (TDA9885Ptr)f->afc_source; + if (t == NULL) + return TUNER_OFF; + + tda9885_getstatus(t); + tda9885_dumpstatus(t); + AFC = t->afc_status & 0x0f; + + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC: FI1236_get_afc_hint: %i\n", AFC); + if (AFC == 0) return TUNER_TUNED; + else if (AFC <= 0x07)return TUNER_JUST_BELOW; + else if (AFC < 0x0f )return TUNER_JUST_ABOVE; + else if (AFC == 0x0f)return TUNER_TUNED; + } + else + { + I2C_WriteRead(&(f->d), NULL, 0, &out, 1); + AFC=out & 0x7; + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC: FI1236_get_afc_hint: %i\n", AFC); + if(AFC==2)return TUNER_TUNED; + if(AFC==3)return TUNER_JUST_BELOW; + if(AFC==1)return TUNER_JUST_ABOVE; + return TUNER_OFF; + } + return TUNER_OFF; +} + +static int MT2032_get_afc_hint(FI1236Ptr f) +{ +CARD8 in; +CARD8 out[2]; +CARD8 AFC; +in=0x0e; +I2C_WriteRead(&(f->d), (I2CByte *)&in, 1, out, 2); +AFC=(out[0]>>4) & 0x7; +#if 0 +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC=%d TAD1=%d TAD2=%d\n", AFC, out[1] & 0x7, (out[1]>>4)& 0x07); +#endif +if(AFC==2)return TUNER_TUNED; +if(AFC==3)return TUNER_JUST_BELOW; +if(AFC==1)return TUNER_JUST_ABOVE; +return TUNER_OFF; +} + +/* this function is for external use only */ +int TUNER_get_afc_hint(FI1236Ptr f) +{ +if(f->afc_timer_installed)return TUNER_STILL_TUNING; +return f->last_afc_hint; +if(f->type==TUNER_TYPE_MT2032) + return MT2032_get_afc_hint(f); + else + return FI1236_get_afc_hint(f); +} + +static void MT2032_dump_status(FI1236Ptr f) +{ +CARD8 in; +CARD8 out[2]; +CARD8 AFC; +CARD8 LDONrb; +CARD8 LO1LK, LO2LK, XOK; +CARD8 TAD2, TAD1; + +in=0x0e; +I2C_WriteRead(&(f->d), (I2CByte *)&in, 1, out, 2); +XOK=out[0] & 1; +LO1LK=(out[0]>>2) &1; +LO2LK=(out[0]>>1) &1; +LDONrb=(out[0]>>3) &1; + +AFC=(out[0]>>4) & 0x7; + +TAD1=(out[1] & 0x7); +TAD2=(out[1]>>4) & 0x7; + +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: status: XOK=%d LO1LK=%d LO2LK=%d LDONrb=%d AFC=%d TAD1=%d TAD2=%d\n", + XOK, LO1LK, LO2LK, LDONrb, AFC, TAD1, TAD2); +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: status: OSCILLATOR:%s PLL1:%s PLL2:%s\n", + XOK ? "ok":"off", LO1LK ? "locked" : "off" , LO2LK ? "locked" : "off"); + +} + +static void MT2032_tune(FI1236Ptr f, double freq, double step) +{ +MT2032_parameters m; +CARD8 data[10]; +int i; +/* NTSC IF is 44mhz.. but 733/16=45.8125 and all TDAXXXX docs mention + 45.75, 39, 58.75 and 30. */ +#if 0 +MT2032_calculate_register_settings(&m, freq, 1090.0, 45.125, 5.25, 6.0, step); +MT2032_calculate_register_settings(&m, freq, 1090.0, 45.74, 5.25, 6.0, step); +#endif +MT2032_calculate_register_settings(&m, freq, 1090.0, f->video_if, 5.25, 3.0, step); +MT2032_dump_parameters(f, &m); +MT2032_implement_settings(f, &m); +/* MT2032_dump_parameters(f, &m); */ +for(i=0;i<3;i++){ + MT2032_optimize_VCO(f, &m); + if(MT2032_wait_for_lock(f)){ + data[0]=0x02; /* LO Gain control register 0x02 */ + data[1]=0x20; + I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0); + return; + } + data[0]=0x07; + data[1]=0x88|f->xogc; + I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0); + usleep(15000); + data[1]=0x08|f->xogc; + I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0); + } +xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "MT2032: failed to set frequency\n"); +} + +void FI1236_set_tuner_type(FI1236Ptr f, int type) +{ +f->type=type; +if(type>=NUM_TUNERS)type = NUM_TUNERS-1; +if(type<0)type = 0; +memcpy(&(f->parm), &(tuner_parms[type]), sizeof(FI1236_parameters)); +f->original_frequency=f->parm.min_freq; +f->afc_delta=0; +if(type==TUNER_TYPE_MT2032){ + MT2032_init(f); + return; + } +} + + +static CARD32 AFC_TimerCallback(OsTimerPtr timer, CARD32 time, pointer data){ +FI1236Ptr f=(FI1236Ptr)data; +if(FI1236_AFC(f))return 150; + else { + f->afc_timer_installed=FALSE; + f->afc_count=0; + return 0; + } +} + +void FI1236_tune(FI1236Ptr f, CARD32 frequency) +{ + CARD16 divider; + CARD8 data; + + if(frequency < f->parm.min_freq) frequency = f->parm.min_freq; + if(frequency > f->parm.max_freq) frequency = f->parm.max_freq; + + divider = (f->parm.fcar+(CARD16)frequency) & 0x7fff; + f->tuner_data.div1 = (CARD8)((divider>>8)&0x7f); + f->tuner_data.div2 = (CARD8)(divider & 0xff); + f->tuner_data.control = f->parm.control; + + if(frequency < f->parm.threshold1) + { + f->tuner_data.band = f->parm.band_low; + } + else if (frequency < f->parm.threshold2) + { + f->tuner_data.band = f->parm.band_mid; + } + else + { + f->tuner_data.band = f->parm.band_high; + } + + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "Setting tuner band to %d\n", f->tuner_data.band); + + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "Setting tuner frequency to %d\n", (int)frequency); + + if ((f->type == TUNER_TYPE_FM1216ME) || (f->type == TUNER_TYPE_FI1236W)) + { + f->tuner_data.aux = 0x20; + I2C_WriteRead(&(f->d), (I2CByte *)&(f->tuner_data), 5, NULL, 0); + I2C_WriteRead(&(f->d), NULL, 0, &data, 1); + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "Tuner status %x\n", data); + + } + else + I2C_WriteRead(&(f->d), (I2CByte *)&(f->tuner_data), 4, NULL, 0); +} + +void TUNER_set_frequency(FI1236Ptr f, CARD32 frequency) +{ + if(frequency < f->parm.min_freq) frequency = f->parm.min_freq; + if(frequency > f->parm.max_freq) frequency = f->parm.max_freq; + + f->afc_delta=0; + f->original_frequency=frequency; + + if(f->type==TUNER_TYPE_MT2032) + { + MT2032_tune(f, (1.0*frequency)/16.0, 0.0625); + } else + { + FI1236_tune(f, frequency); + } + + if(!f->afc_timer_installed) + { + f->afc_timer_installed=TRUE; +/* RegisterBlockAndWakeupHandlers(FI1236_BlockHandler, AFCWakeup, f); */ + TimerSet(NULL, 0, 300, AFC_TimerCallback, f); + } + +} + + +int FI1236_AFC(FI1236Ptr f) +{ + #if 0 + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC: f=%p f->count=%d f->original_frequency=%d f->afc_delta=%d\n", f, f->afc_count, f->original_frequency, f->afc_delta); + #endif + f->afc_count++; + if(f->type==TUNER_TYPE_MT2032) + { + f->last_afc_hint=MT2032_get_afc_hint(f); + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC: afc_hint=%d\n", f->last_afc_hint); + if(f->last_afc_hint==TUNER_TUNED)return 0; + if(f->afc_count>3)f->last_afc_hint=TUNER_OFF; + if(f->last_afc_hint==TUNER_OFF) + { + f->afc_delta=0; + } else + f->afc_delta+=f->last_afc_hint; + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC: Setting tuner frequency to %g\n", (0.5*(2*f->original_frequency+f->afc_delta))/16.0); + MT2032_tune(f, (1.0*f->original_frequency+0.5*f->afc_delta)/16.0, 0.03125); + if(f->last_afc_hint==TUNER_OFF)return 0; + return 1; /* call me again */ + } else + { + f->last_afc_hint=FI1236_get_afc_hint(f); + if(f->last_afc_hint==TUNER_TUNED) + { + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC: TUNER_TUNNED\n"); + return 0; + } + if(f->afc_count>3)f->last_afc_hint=TUNER_OFF; + if(f->last_afc_hint==TUNER_OFF) + { + f->afc_delta=0; + } else + f->afc_delta+=f->last_afc_hint; + xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC: Setting tuner frequency to %g\n", (0.5*(2*f->original_frequency+f->afc_delta))/16.0); + FI1236_tune(f, f->original_frequency+f->afc_delta); + if(f->last_afc_hint==TUNER_OFF)return 0; + return 1; /* call me again */ + } + return 0; /* done */ +} + +void fi1236_dump_status(FI1236Ptr f) +{ +if(f->type==TUNER_TYPE_MT2032){ + MT2032_dump_status(f); + } +} diff --git a/xorg-server/hw/xfree86/i2c/fi1236.h b/xorg-server/hw/xfree86/i2c/fi1236.h new file mode 100644 index 000000000..eda1c781c --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/fi1236.h @@ -0,0 +1,110 @@ +#ifndef __FI1236_H__ +#define __FI1236_H__ + +#include "xf86i2c.h" + +/* why someone has defined NUM someplace else is beyoung me.. */ +#undef NUM + +typedef struct { + CARD32 fcar; /* 16 * fcar_Mhz */ + CARD32 min_freq; /* 16 * min_freq_Mhz */ + CARD32 max_freq; /* 16 * max_freq_Mhz */ + + CARD32 threshold1; /* 16 * Value_Mhz */ + CARD32 threshold2; /* 16 * Value_Mhz */ + + CARD8 band_low; + CARD8 band_mid; + CARD8 band_high; + CARD8 control; + } FI1236_parameters; + + +typedef struct { + /* what we want */ + /* all frequencies are in Mhz */ + double f_rf; /* frequency to tune to */ + double f_if1; /* first intermediate frequency */ + double f_if2; /* second intermediate frequency */ + double f_ref; /* reference frequency */ + double f_ifbw; /* bandwidth */ + double f_step; /* step */ + + /* what we compute */ + double f_lo1; + double f_lo2; + int LO1I; + int LO2I; + int SEL; + int STEP; + int NUM; + } MT2032_parameters; + +typedef struct { + I2CDevRec d; + int type; + + void* afc_source; /* The AFC source may be another chip like TDA988x */ + + int afc_delta; + CARD32 original_frequency; + Bool afc_timer_installed; + int afc_count; + int last_afc_hint; + + double video_if; + FI1236_parameters parm; + int xogc; /* for MT2032 */ + + struct { + CARD8 div1; + CARD8 div2; + CARD8 control; + CARD8 band; + CARD8 aux; /* this is for MK3 tuners */ + } tuner_data; + } FI1236Rec, *FI1236Ptr; + +#define TUNER_TYPE_FI1236 0 +#define TUNER_TYPE_FI1216 1 +#define TUNER_TYPE_TEMIC_FN5AL 2 +#define TUNER_TYPE_MT2032 3 +#define TUNER_TYPE_FI1246 4 +#define TUNER_TYPE_FI1256 5 +#define TUNER_TYPE_FI1236W 6 +#define TUNER_TYPE_FM1216ME 7 + +#define FI1236_ADDR(a) ((a)->d.SlaveAddr) + +#define FI1236_ADDR_1 0xC6 +#define FI1236_ADDR_2 0xC0 + +#define TUNER_TUNED 0 +#define TUNER_JUST_BELOW 1 +#define TUNER_JUST_ABOVE -1 +#define TUNER_OFF 4 +#define TUNER_STILL_TUNING 5 + + +FI1236Ptr Detect_FI1236(I2CBusPtr b, I2CSlaveAddr addr); +void FI1236_set_tuner_type(FI1236Ptr f, int type); +void TUNER_set_frequency(FI1236Ptr f, CARD32 frequency); +void FI1236_tune(FI1236Ptr f, CARD32 frequency); +int FI1236_AFC(FI1236Ptr f); +int TUNER_get_afc_hint(FI1236Ptr f); +void fi1236_dump_status(FI1236Ptr f); + +#define FI1236SymbolsList \ + "Detect_FI1236", \ + "FI1236_set_tuner_type", \ + "TUNER_set_frequency" + +#define xf86_Detect_FI1236 ((FI1236Ptr (*)(I2CBusPtr, I2CSlaveAddr))LoaderSymbol("Detect_FI1236")) +#define xf86_FI1236_set_tuner_type ((void (*)(FI1236Ptr, int))LoaderSymbol("FI1236_set_tuner_type")) +#define xf86_TUNER_set_frequency ((void (*)(FI1236Ptr, CARD32))LoaderSymbol("TUNER_set_frequency")) +#define xf86_FI1236_AFC ((int (*)(FI1236Ptr))LoaderSymbol("FI1236_AFC")) +#define xf86_TUNER_get_afc_hint ((int (*)(FI1236Ptr))LoaderSymbol("TUNER_get_afc_hint")) +#define xf86_fi1236_dump_status ((void (*)(FI1236Ptr))LoaderSymbol("fi1236_dump_status")) + +#endif diff --git a/xorg-server/hw/xfree86/i2c/fi1236_module.c b/xorg-server/hw/xfree86/i2c/fi1236_module.c new file mode 100644 index 000000000..4016ad0d4 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/fi1236_module.c @@ -0,0 +1,32 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86Module.h" + +static MODULESETUPPROTO(fi1236Setup); + +static XF86ModuleVersionInfo fi1236VersRec = +{ + "fi1236", + MODULEVENDORSTRING, + MODINFOSTRING1, + MODINFOSTRING2, + XORG_VERSION_CURRENT, + 1, 0, 0, + ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ + ABI_VIDEODRV_VERSION, + MOD_CLASS_NONE, + {0,0,0,0} +}; + +_X_EXPORT XF86ModuleData fi1236ModuleData = { + &fi1236VersRec, + fi1236Setup, + NULL +}; + +static pointer +fi1236Setup(pointer module, pointer opts, int *errmaj, int *errmin) { + return (pointer)1; +} diff --git a/xorg-server/hw/xfree86/i2c/i2c_def.h b/xorg-server/hw/xfree86/i2c/i2c_def.h new file mode 100644 index 000000000..6e119e478 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/i2c_def.h @@ -0,0 +1,14 @@ +#ifndef __I2C_DEF_H__ +#define __I2C_DEF_H__ + +/* the following are a workaround for possible loader bug.. + WATCH function types ! */ +#define CreateI2CBusRec ((pointer (*)(void))LoaderSymbol("xf86CreateI2CBusRec")) +#define DestroyI2CBusRec ((pointer (*)(I2CBusPtr, Bool, Bool))LoaderSymbol("xf86DestroyI2CBusRec")) +#define I2CBusInit ((Bool (*)(pointer))LoaderSymbol("xf86I2CBusInit")) +#define I2C_WriteRead ((Bool (*)(I2CDevPtr, I2CByte *, int, I2CByte *, int))LoaderSymbol("xf86I2CWriteRead")) +#define CreateI2CDevRec ((pointer (*)(void))LoaderSymbol("xf86CreateI2CDevRec")) +#define I2CDevInit ((Bool (*)(I2CDevPtr))LoaderSymbol("xf86I2CDevInit")) +#define I2CProbeAddress ((Bool (*)(I2CBusPtr,I2CSlaveAddr))LoaderSymbol("xf86I2CProbeAddress")) + +#endif diff --git a/xorg-server/hw/xfree86/i2c/msp3430.c b/xorg-server/hw/xfree86/i2c/msp3430.c new file mode 100644 index 000000000..4bd3a7187 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/msp3430.c @@ -0,0 +1,726 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include +#include + +#include "xf86.h" +#include "xf86i2c.h" +#include "msp3430.h" +#include "i2c_def.h" + +#define CONTROL 0x00 +#define WR_DEM 0x10 +#define RD_DEM 0x11 +#define WR_DSP 0x12 +#define RD_DSP 0x13 + + +void InitMSP34xxG(MSP3430Ptr m); +void InitMSP34x5D(MSP3430Ptr m); +void CheckModeMSP34x5D(MSP3430Ptr m); +char *MSP_getProductName (CARD16 product_id); +void mpause(int milliseconds); + +#define __MSPDEBUG__ 0 + +#if __MSPDEBUG__ > 3 + +void MSPBeep(MSP3430Ptr m, CARD8 freq); +#define __MSPBEEP MSPBeep(m,0x14); + +#else + +#define __MSPBEEP +#endif + +static void SetMSP3430Control(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegValueHigh, CARD8 RegValueLow) +{ + I2CByte data[3]; + + data[0]=RegAddress; + data[1]=RegValueHigh; + data[2]=RegValueLow; + + I2C_WriteRead(&(m->d),data,3,NULL,0); +} + +static void SetMSP3430Data(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegSubAddressHigh, CARD8 RegSubAddressLow, + CARD8 RegValueHigh, CARD8 RegValueLow) +{ + I2CByte data[5]; +#ifdef MSP_DEBUG + if(!m->registers_present[RegSubAddressLow]){ + xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_ERROR, "Attempt to access non-existent register in MSP34xxX: 0x%02x 0x%02x 0x%02x <- 0x%02x 0x%02x\n", + RegAddress, RegSubAddressHigh, RegSubAddressLow, RegValueHigh, RegValueLow); + } +#endif + + data[0] = RegAddress; + data[1] = RegSubAddressHigh; + data[2] = RegSubAddressLow; + data[3] = RegValueHigh; + data[4] = RegValueLow; + + I2C_WriteRead(&(m->d),data,5,NULL,0); +} + +static void GetMSP3430Data(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegSubAddressHigh, CARD8 RegSubAddressLow, + CARD8 *RegValueHigh, CARD8 *RegValueLow) +{ + I2CByte send[3]; + I2CByte receive[2]; + + send[0] = RegAddress; + send[1] = RegSubAddressHigh; + send[2] = RegSubAddressLow; + + I2C_WriteRead(&(m->d), send, 3, receive, 2); + + *RegValueHigh = receive[0]; + *RegValueLow = receive[1]; +} + +#if __MSPDEBUG__ > 2 +static void MSP3430DumpStatus(MSP3430Ptr m) +{ +CARD8 status_hi, status_lo; +CARD8 subaddr, data[2]; + +GetMSP3430Data(m, RD_DEM, 0x02, 0x00, &status_hi, &status_lo); +xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP34xx: SAP(8)=%d mono/NICAM(7)=%d stereo=%d %s O_1=%d O_0=%d 2nd car=%d 1st car=%d\n", + status_hi & 1, (status_lo>>7) & 1, (status_lo>>6)&1, + (status_lo>>5)? ( (status_hi>>1)&1? "bad NICAM reception" : "NICAM" ) : + ((status_hi>>1)&1 ? "bogus" : "ANALOG FM/AM") , + (status_lo>>4)&1, (status_lo>>3)&1,!( (status_lo>>2)&1), !((status_lo>>1)&1)); + +GetMSP3430Data(m, RD_DEM, 0x00, 0x7E, &status_hi, &status_lo); +xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP34xx: standard result=0x%02x%02x\n", + status_hi, status_lo); +subaddr=0x0; +I2C_WriteRead(&(m->d), &subaddr, 1, data, 2); +xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP34xx: control=0x%02x%02x\n", + data[1], data[0]); +} +#endif + +/* wrapper */ +void InitMSP3430(MSP3430Ptr m) +{ + #if __MSPDEBUG__ > 1 + xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"InitMSP3430(m->connector=%d, m->standard=%d, m->chip_family=%d)\n", + m->connector, m->standard, m->chip_family); + #endif + switch (m->chip_family) { + case MSPFAMILY_34x0G: + InitMSP34xxG(m); + break; + case MSPFAMILY_34x5G: + InitMSP34xxG(m); + break; + case MSPFAMILY_34x5D: + InitMSP34x5D(m); + break; + } +} + +/*----------------------------------------------------------------- +| common functions for all MSP34xx chips +|----------------------------------------------------------------*/ + +MSP3430Ptr DetectMSP3430(I2CBusPtr b, I2CSlaveAddr addr) +{ + MSP3430Ptr m; + I2CByte a; + CARD8 hardware_version, major_revision, product_code, rom_version; + Bool supported; + + m = xcalloc(1,sizeof(MSP3430Rec)); + if(m == NULL)return NULL; + m->d.DevName = strdup("MSP34xx"); + m->d.SlaveAddr = addr; + m->d.pI2CBus = b; + m->d.NextDev = NULL; + m->d.StartTimeout = b->StartTimeout; + m->d.BitTimeout = b->BitTimeout; + m->d.AcknTimeout = b->AcknTimeout; + m->d.ByteTimeout = b->ByteTimeout; + + if(!I2C_WriteRead(&(m->d), NULL, 0, &a, 1)) + { + xfree(m->d.DevName); + xfree(m); + return NULL; + } + + + m->standard=MSP3430_NTSC; + m->connector=MSP3430_CONNECTOR_1; + m->mode=MSPMODE_STEREO_A; /*stereo or chanel A if avail. */ + m->c_format=MSPFORMAT_UNKNOWN; + m->c_standard=MSPSTANDARD_UNKNOWN; + m->c_matrix=m->c_fmmatrix=m->c_source=0; + m->volume=0; + m->recheck=FALSE; + + GetMSP3430Data(m, RD_DSP, 0x00, 0x1E, &hardware_version, &major_revision); + GetMSP3430Data(m, RD_DSP, 0x00, 0x1F, &product_code, &rom_version); + m->hardware_version=hardware_version; + m->major_revision=major_revision; + m->product_code=product_code; + m->rom_version=rom_version; + + m->chip_id=((major_revision << 8) | product_code); + + supported=FALSE; + switch (major_revision) { + case 4: /* 34xxD */ + switch (product_code) { + case 0x05: /* 3405D */ + case 0x0A: /* 3410D */ + case 0x0F: /* 3415D */ + m->chip_family=MSPFAMILY_34x5D; + m->recheck=TRUE; + supported=TRUE; + break; + default: + m->chip_family=MSPFAMILY_34x0D; + } + break; + case 7: /* 34xxG */ + switch(product_code){ + case 0x00: + case 0x0A: + case 0x1E: + case 0x28: + case 0x32: + m->chip_family=MSPFAMILY_34x0G; + supported=TRUE; + break; + case 0x0f: + case 0x19: + case 0x2d: + case 0x37: + case 0x41: + m->chip_family=MSPFAMILY_34x5G; + supported=TRUE; + #ifdef MSP_DEBUG + memset(m->registers_present, 0, 256); + #define A(num) m->registers_present[(num)]=1; + #define B(num1, num2) memset(&(m->registers_present[num1]), 1, num2-num1); + A(0x20) + A(0x30) + A(0x40) + A(0x00) + B(0x01, 0x08) + B(0x0B, 0x0E) + A(0x10) + B(0x12,0x14) + A(0x16) + A(0x29) + #undef B + #undef A + #endif + break; + default: + m->chip_family=MSPFAMILY_UNKNOWN; + } + break; + default: + m->chip_family=MSPFAMILY_UNKNOWN; + } + + xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "Found %s%s, rom version 0x%02x, chip_id=0x%04x\n", + MSP_getProductName(m->chip_id), supported?"":" (unsupported)", rom_version, m->chip_id); + + if (!supported) { + xfree(m->d.DevName); + xfree(m); + return NULL; + } + if(!I2CDevInit(&(m->d))) + { + xfree(m->d.DevName); + xfree(m); + return NULL; + } + + return m; +} + +void ResetMSP3430(MSP3430Ptr m) +{ + /* Reset the MSP3430 */ + SetMSP3430Control(m, 0x00, 0x80, 0x00); + /* Set it back to normal operation */ + SetMSP3430Control(m, 0x00, 0x00, 0x00); + + m->c_format=MSPFORMAT_UNKNOWN; + m->c_standard=MSPSTANDARD_UNKNOWN; + m->c_matrix=m->c_fmmatrix=m->c_source=0; + m->volume=0; +} + +void MSP3430SetVolume (MSP3430Ptr m, CARD8 value) +{ + CARD8 result; +#if 0 + CARD8 old_volume; + GetMSP3430Data(m, RD_DSP, 0x00, 0x00, &old_volume, &result); + xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP3430 result 0x%02x\n", result); +#endif + /* save an extra Get call */ + result=0; + + SetMSP3430Data(m, WR_DSP, 0x00, 0x00, value, result); + + SetMSP3430Data(m, WR_DSP, 0x00, 0x07, value, 0); + m->volume=value; + +#if __MSPDEBUG__ > 2 + MSP3430DumpStatus(m); + __MSPBEEP + GetMSP3430Data(m, RD_DSP, 0x00, 0x00, &old_volume, &result); + xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP3430 volume 0x%02x\n",value); +#endif +} + + +void MSP3430SetSAP (MSP3430Ptr m, int mode) +{ + xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "Put actual code to change SAP here\n"); + + SetMSP3430Data(m, WR_DSP, 0x00, 0x08, mode & 0xff, 0x20); +} + + +#if 0 +void MSP3430SetSource(MSP3430Ptr m, CARD8 value) +{ + /* Write to DSP, register 0x0008, (loudspeaker channel source/matrix) */ + /* This sets the source to the TV tuner, for stereo operation */ + SetMSP3430Data(m, WR_DSP, 0x00, 0x08, value, 0x20); +} +#endif + + +char *MSP_getProductName (CARD16 product_id) +{ + switch (product_id) { + case 0x0400: return "MSP3400D"; + case 0x040a: return "MSP3410D"; + case 0x0405: return "MSP3405D"; + case 0x040f: return "MSP3415D"; + case 0x0700: return "MSP3400G"; + case 0x070a: return "MSP3410G"; + case 0x071e: return "MSP3430G"; + case 0x0728: return "MSP3440G"; + case 0x0732: return "MSP3450G"; + case 0x070f: return "MSP3415G"; + case 0x0719: return "MSP3425G"; + case 0x072d: return "MSP3445G"; + case 0x0737: return "MSP3455G"; + case 0x0741: return "MSP3465G"; + } + return "MSP - unknown type"; +} + +#if __MSPDEBUG__ > 2 +/*puts beep in MSP output + freq = 0x01 - 16Hz ... 0x40 - 1kHz ... 0xff - 4kHz +*/ +void MSPBeep(MSP3430Ptr m, CARD8 freq) { + SetMSP3430Data (m, WR_DSP, 0x00, freq, 0x7f, 0x40); + mpause(100); + SetMSP3430Data (m, WR_DSP, 0x00, 0x14, 0x00, 0x00); +} +#endif + +void mpause(int milliseconds) { + int i,m; + m=milliseconds/20; + for (i=0;i 1 + xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"InitMSP34xxG(m->connector=%d, m->standard=%d, m->chip_family=%d)\n", + m->connector, m->standard, m->chip_family); + #endif + /* Reset MSP3430 */ + SetMSP3430Control(m, 0x00, 0x80, 0x00); + /* Set it back to normal operation */ + SetMSP3430Control(m, 0x00, 0x00, 0x00); + + /*set MODUS register */ + /* bits: 0 - automatic sound detection */ + /* 1 - enable STATUS change */ + /* 12 - detect 6.5 Mhz carrier as D/K1, D/K2 or D/K NICAM (does not seem to work ) */ + /* 13 - detect 4.5 Mhz carrier as BTSC */ + if ( (m->standard & 0xff) == MSP3430_PAL ) + { + SetMSP3430Data(m, WR_DEM, 0x00, 0x30, 0x30, 0x03|0x08); /* make O_ pins tristate */ + /* PAL standard */ + SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x01); /* possibly wrong */ + } else { + SetMSP3430Data(m, WR_DEM, 0x00, 0x30, 0x20, 0x03|0x08); + /* standard selection is M-BTSC-Stereo */ + SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x20); + } + + switch(m->connector){ + case MSP3430_CONNECTOR_1: + SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x03, 0x20); + break; + case MSP3430_CONNECTOR_2: + /* this has not been checked yet.. could be bogus */ + /* SCART Input Prescale: 0 dB gain */ + SetMSP3430Data(m, WR_DSP, 0x00, 0x0d, 0x19, 0x00); + SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x02, 0x20); + break; + case MSP3430_CONNECTOR_3: + default: + /* SCART Input Prescale: 0 dB gain */ + SetMSP3430Data(m, WR_DSP, 0x00, 0x0d, 0x19, 0x00); + + SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x02, 0x20); + break; + } + + switch(m->standard){ + case MSP3430_PAL: + SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03); + SetMSP3430Data(m, WR_DSP, 0x00, 0x10, 0x00, 0x5a); + SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x03); + /* Set volume to FAST_MUTE. */ + SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00); + break; + case MSP3430_PAL_DK1: + SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03); + SetMSP3430Data(m, WR_DSP, 0x00, 0x10, 0x00, 0x5a); + SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x04); + /* Set volume to FAST_MUTE. */ + SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00); + break; + case MSP3430_SECAM: /* is this right ? */ + case MSP3430_NTSC: + /* Write to DSP, register 0x000E, (prescale FM/FM matrix) */ + SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03); + + /* Set volume to FAST_MUTE. */ + SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00); + break; + } + +} + +/*----------------------------------------------------------------- +| specific functions for all MSP34x5D chips +|----------------------------------------------------------------*/ + +void InitMSP34x5D(MSP3430Ptr m) +{ +int count; +CARD8 high,low; +CARD16 result,standard; +CARD16 peak; + + +if (m->c_format==MSPFORMAT_UNKNOWN) ResetMSP3430(m); +else { + /*mute volume*/ + SetMSP3430Data (m, WR_DSP, 0x00, 0x00, 0x00, 0x00); +} + + + + switch(m->connector){ + case MSP3430_CONNECTOR_2: + case MSP3430_CONNECTOR_3: + if (m->c_format!=MSPFORMAT_SCART) { + /* SCART Input Prescale: 0 dB gain */ + SetMSP3430Data (m, WR_DSP, 0x00, 0x0d, 0x19, 0x00); + /* this has not been checked yet.. could be bogus */ + m->c_format=MSPFORMAT_SCART; /*stereo*/ + } + break; + case MSP3430_CONNECTOR_1: + default: + + switch ( m->standard & 0x00ff ) { + case MSP3430_PAL: + switch( m->standard ) { + case MSP3430_PAL_DK1: + standard=MSPSTANDARD_FM_DK1; + break; +/* case MSP3430_PAL_DK2: + standard=MSPSTANDARD_FM_DK2; + break; + case MSP3430_PAL_BG: + may be FM stereo (Germany) or FM NICAM (Scandinavia,spain) + standard=MSPSTANDARD_AUTO; + break; +*/ + default: + standard=MSPSTANDARD_AUTO; + } + break; + case MSP3430_SECAM: + standard=MSPSTANDARD_AUTO; + case MSP3430_NTSC: + /* Only MSP34x5 supported format - Korean NTSC-M*/ + standard=MSPSTANDARD_FM_M; + default: + standard=MSPSTANDARD_AUTO; + } + + /*no NICAM support in MSP3410D - force to autodetect*/ + if ((m->chip_id==0x405) && (standard>=MSPSTANDARD_NICAM_BG)) + standard=MSPSTANDARD_AUTO; + + if (m->c_standard != standard) { + + SetMSP3430Data (m, WR_DEM, 0x00, 0x20, standard>>8, standard & 0xFF); + if (standard==MSPSTANDARD_AUTO) { + count = 50; /* time shouldn't exceed 1s, just in case */ + do { + usleep(20000); + GetMSP3430Data (m, RD_DEM, 0x00, 0x7e, &high, &low); + result = ( high << 8 ) | low; + --count; + } while( result > 0x07ff && count > 0 ); + + if ((result > MSPSTANDARD_AUTO)) + standard=result; + else standard=MSPSTANDARD_UNKNOWN; +#if __MSPDEBUG__ > 1 + xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"Detected audio standard: %d\n",result); +#endif + /* result = MSPSTANDARD_NICAM_L can be one of: + SECAM_L - MSPSTANDARD_NICAM_L + D/K1 - MSPSTANDARD_FM_DK1 + D/K2 - MSPSTANDARD_FM_DK2 + D/K-NICAM - MSPSTANDARD_NICAM_DK*/ + if( standard == MSPSTANDARD_NICAM_L ) { + if ((m->standard & 0x00ff)==MSP3430_PAL) { + /* force PAL D/K */ + standard=MSPSTANDARD_FM_DK1; + SetMSP3430Data (m, WR_DEM, 0x00, 0x20, standard>>8, standard & 0xFF); +#if __MSPDEBUG__ > 1 + xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO, "Detected 6.5MHz carrier - forced to D/K1 !!!\n" ); +#endif + } + } + } + m->c_standard=standard; + } /*end - standard changed*/ + else { + if (standardc_format=MSPFORMAT_1xFM; + } + else if (standardL ch1->R*/ + SetMSP3430Data (m, WR_DSP, 0x00, 0x0c, 0x00, 0x20); + + mpause(250); + GetMSP3430Data (m, RD_DSP, 0x00, 0x1A, &high, &low); + peak = (high << 8) | low; +#if __MSPDEBUG__ > 1 + xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"Second carrier Quasi-Peak detection: %d\n",peak); +#endif + /*turn on FM DC Notch*/ + SetMSP3430Data (m, WR_DSP, 0x00, 0x17, 0x00, 0x00); + + if (peak<5) { + /* if second carrier not detected - only mono from first carrier*/ + m->c_format=MSPFORMAT_1xFM; + } + else { + m->c_format=MSPFORMAT_2xFM; + /*start of FM identification process - FM_WAIT + wait at least 0.5s - used 1s - gives beter resolution*/ + mpause(1000); + } + } + else { + if (standard==MSPSTANDARD_NICAM_L) { + m->c_format=MSPFORMAT_NICAM_AM; + /* set AM prescale */ + SetMSP3430Data (m, WR_DSP, 0x00, 0x0e, 0x7C, 0); + } + else { + m->c_format=MSPFORMAT_NICAM_FM; + /* set FM prescale */ + SetMSP3430Data (m, WR_DSP, 0x00, 0x0e, 0x30, 0); + } + /* set FM deemphasis*/ + SetMSP3430Data (m, WR_DSP, 0x00, 0x0f, 0x00, 0); + /* set NICAM prescale to 0dB */ + SetMSP3430Data (m, WR_DSP, 0x00, 0x10, 0x20, 0); + } + + break; + } /*end - case conector*/ + + CheckModeMSP34x5D(m); + + /* Set volume to FAST_MUTE. */ + /*SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00);*/ + /*set volume*/ + MSP3430SetVolume(m,m->volume); + + __MSPBEEP + + +} /* EnableMSP34x5D ()... */ + + + + +void CheckModeMSP34x5D(MSP3430Ptr m) { + const char stereo_on=25; + const char stereo_off=20; + const char dual_on=-stereo_on; + const char dual_off=-stereo_off; + char detect; + CARD8 matrix, fmmatrix, source, high, low; + + fmmatrix=0; /*no matrix*/ + source=0; /*FM*/ + switch (m->c_format) { + case MSPFORMAT_NICAM_FM: + case MSPFORMAT_NICAM_AM: + case MSPFORMAT_SCART: + source=( (m->c_format == MSPFORMAT_SCART)?2:1 ); + switch (m->mode) { + case MSPMODE_MONO: + matrix=0x30; /*MONO*/ + break; + case MSPMODE_A: + matrix=0x00; /*A*/ + break; + case MSPMODE_B: + matrix=0x10; /*B*/ + break; + default: + matrix=0x20; /*STEREO*/ + break; + } + break; + default: + case MSPFORMAT_1xFM: + matrix=0x00; /*A*/ + break; + case MSPFORMAT_2xFM: + switch (m->mode) { + case MSPMODE_MONO: + matrix=0x30; /*MONO*/ + break; + case MSPMODE_STEREO: + matrix=0x20; /*STEREO*/ + fmmatrix=((m->c_standard==MSPSTANDARD_FM_M)?2:1); + break; + case MSPMODE_AB: + matrix=0x20; /*STEREO*/ + break; + case MSPMODE_A: + matrix=0x00; /*A*/ + break; + case MSPMODE_B: + matrix=0x10; /*B*/ + break; + default: + /*FM_IDENT_CHECK*/ + GetMSP3430Data (m, RD_DSP, 0x00, 0x18, &high, &low); + detect=(char)high; +#if __MSPDEBUG__ > 1 + xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"Stereo Detection Register: %d\n",detect); +#endif + if (detect>=((m->c_mode==MSPMODE_STEREO)?stereo_off:stereo_on)) { + m->c_mode=MSPMODE_STEREO; + matrix=0x20; /*STEREO*/ + fmmatrix=((m->c_standard==MSPSTANDARD_FM_M)?2:1); + } + else if (detect<=((m->c_mode==MSPMODE_AB)?dual_off:dual_on)) { + m->c_mode=MSPMODE_AB; + switch (m->mode) { + case MSPMODE_STEREO_AB: matrix=0x20; break; + case MSPMODE_STEREO_B: matrix=0x10; break; + default: + case MSPMODE_A: matrix=0x00; break; + } + } + else { + m->c_mode=MSPMODE_MONO; + matrix=0x30; /*MONO*/ + } + break; + } /* end - case mode*/ + break; + } + + if (m->c_fmmatrix != fmmatrix) { + GetMSP3430Data (m, RD_DSP, 0x00, 0x0e, &high, &low); + SetMSP3430Data (m, WR_DSP, 0x00, 0x0e, high, fmmatrix); + m->c_fmmatrix = fmmatrix; + } + + if ((m->c_matrix != matrix) || (m->c_source != source)) { + /*set chanel source and matrix for loudspeaker*/ + SetMSP3430Data (m, WR_DSP, 0x00, 0x08, source, matrix); + + m->c_matrix = matrix; + m->c_source = source; + } + + if ( ((m->c_format) & 0xF0) == MSPFORMAT_NICAM) + SetMSP3430Data (m, WR_DEM, 0x00, 0x21, 0, 1); + +#if __MSPDEBUG__ > 0 + char *msg; + switch (matrix) { + case 0x30: /*MONO*/ + msg="MONO"; + break; + case 0x00: /*LEFT*/ + msg="MONO/CHANNEL_1"; + break; + case 0x10: /*RIGHT*/ + msg="MONO/CHANNEL_2"; + break; + case 0x20: /*LEFT*/ + msg="STEREO"; + break; + default: + msg="unknown"; + break; + } + xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"Audio mode set to: %s\n",msg); +#endif +} + diff --git a/xorg-server/hw/xfree86/i2c/msp3430.h b/xorg-server/hw/xfree86/i2c/msp3430.h new file mode 100644 index 000000000..1cb9b869d --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/msp3430.h @@ -0,0 +1,114 @@ +#ifndef __MSP3430_H__ +#define __MSP3430_H__ + +#include "xf86i2c.h" + +typedef struct { + I2CDevRec d; + + int standard; + int connector; + int mode; + + CARD8 hardware_version, major_revision, product_code, rom_version; +#ifdef MSP_DEBUG + CARD8 registers_present[256]; +#endif + + CARD16 chip_id; + CARD8 chip_family; + Bool recheck; /*reinitialization needed after channel change */ + CARD8 c_format; /*current state of audio format */ + CARD16 c_standard; /*current state of standard register */ + CARD8 c_source; /*current state of source register */ + CARD8 c_matrix; /*current state of matrix register */ + CARD8 c_fmmatrix; /*current state of fmmatrix register */ + int c_mode; /* current state of mode for autoswitchimg */ + CARD8 volume; + } MSP3430Rec, * MSP3430Ptr; + + +#define MSP3430_ADDR_1 0x80 +#define MSP3430_ADDR_2 0x84 +#define MSP3430_ADDR_3 0x88 + +#define MSP3430_PAL 1 +#define MSP3430_NTSC 2 +#define MSP3430_PAL_DK1 (0x100 | MSP3430_PAL) +#define MSP3430_SECAM 3 + +#define MSP3430_CONNECTOR_1 1 /* tuner on AIW cards */ +#define MSP3430_CONNECTOR_2 2 /* SVideo on AIW cards */ +#define MSP3430_CONNECTOR_3 3 /* composite on AIW cards */ + +#define MSP3430_ADDR(a) ((a)->d.SlaveAddr) + +#define MSP3430_FAST_MUTE 0xFF +/* a handy volume transform function, -1000..1000 -> 0x01..0x7F */ +#define MSP3430_VOLUME(value) (0x01+(0x7F-0x01)*log(value+1001)/log(2001)) + +/*----------------------------------------------------------*/ + +/* MSP chip families */ +#define MSPFAMILY_UNKNOWN 0 +#define MSPFAMILY_34x0D 1 +#define MSPFAMILY_34x5D 2 +#define MSPFAMILY_34x0G 3 +#define MSPFAMILY_34x5G 4 + +/* values for MSP standard */ +#define MSPSTANDARD_UNKNOWN 0x00 +#define MSPSTANDARD_AUTO 0x01 +#define MSPSTANDARD_FM_M 0x02 +#define MSPSTANDARD_FM_BG 0x03 +#define MSPSTANDARD_FM_DK1 0x04 +#define MSPSTANDARD_FM_DK2 0x04 +#define MSPSTANDARD_NICAM_BG 0x08 +#define MSPSTANDARD_NICAM_L 0x09 +#define MSPSTANDARD_NICAM_I 0x0A +#define MSPSTANDARD_NICAM_DK 0x0B + +/* values for MSP format */ +#define MSPFORMAT_UNKNOWN 0x00 +#define MSPFORMAT_FM 0x10 +#define MSPFORMAT_1xFM 0x00|MSPFORMAT_FM +#define MSPFORMAT_2xFM 0x01|MSPFORMAT_FM +#define MSPFORMAT_NICAM 0x20 +#define MSPFORMAT_NICAM_FM 0x00|MSPFORMAT_NICAM +#define MSPFORMAT_NICAM_AM 0x01|MSPFORMAT_NICAM +#define MSPFORMAT_SCART 0x30 + +/* values for MSP mode */ +#define MSPMODE_UNKNOWN 0 +/* automatic modes */ +#define MSPMODE_STEREO_AB 1 +#define MSPMODE_STEREO_A 2 +#define MSPMODE_STEREO_B 3 +/* forced modes */ +#define MSPMODE_MONO 4 +#define MSPMODE_STEREO 5 +#define MSPMODE_AB 6 +#define MSPMODE_A 7 +#define MSPMODE_B 8 +/*----------------------------------------------------------*/ + +void InitMSP3430(MSP3430Ptr m); +MSP3430Ptr DetectMSP3430(I2CBusPtr b, I2CSlaveAddr addr); +void ResetMSP3430(MSP3430Ptr m); +void MSP3430SetVolume (MSP3430Ptr m, CARD8 value); +void MSP3430SetSAP (MSP3430Ptr m, int mode); + +#define MSP3430SymbolsList \ + "InitMSP3430", \ + "DetectMSP3430", \ + "ResetMSP3430", \ + "MSP3430SetVolume", \ + "MSP3430SetSAP" + +#define xf86_DetectMSP3430 ((MSP3430Ptr (*)(I2CBusPtr, I2CSlaveAddr))LoaderSymbol("DetectMSP3430")) +#define xf86_ResetMSP3430 ((void (*)(MSP3430Ptr))LoaderSymbol("ResetMSP3430")) +#define xf86_MSP3430SetVolume ((void (*)(MSP3430Ptr, CARD8))LoaderSymbol("MSP3430SetVolume")) +#define xf86_MSP3430SetSAP ((void (*)(MSP3430Ptr, int))LoaderSymbol("MSP3430SetSAP")) +#define xf86_InitMSP3430 ((void (*)(MSP3430Ptr))LoaderSymbol("InitMSP3430")) + +#endif diff --git a/xorg-server/hw/xfree86/i2c/msp3430_module.c b/xorg-server/hw/xfree86/i2c/msp3430_module.c new file mode 100644 index 000000000..66b14a277 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/msp3430_module.c @@ -0,0 +1,32 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86Module.h" + +static MODULESETUPPROTO(msp3430Setup); + +static XF86ModuleVersionInfo msp3430VersRec = +{ + "msp3430", + MODULEVENDORSTRING, + MODINFOSTRING1, + MODINFOSTRING2, + XORG_VERSION_CURRENT, + 1, 0, 0, + ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ + ABI_VIDEODRV_VERSION, + MOD_CLASS_NONE, + {0,0,0,0} +}; + +_X_EXPORT XF86ModuleData msp3430ModuleData = { + &msp3430VersRec, + msp3430Setup, + NULL +}; + +static pointer +msp3430Setup(pointer module, pointer opts, int *errmaj, int *errmin) { + return (pointer)1; +} diff --git a/xorg-server/hw/xfree86/i2c/tda8425.c b/xorg-server/hw/xfree86/i2c/tda8425.c new file mode 100644 index 000000000..7631a0863 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda8425.c @@ -0,0 +1,78 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86.h" +#include "xf86i2c.h" +#include "tda8425.h" +#include "i2c_def.h" + +#define TDA8425(a,b) { \ + data[0]=a; \ + data[1]=b; \ + I2C_WriteRead(&(t->d), data, 2, NULL, 0); \ + } + +TDA8425Ptr Detect_tda8425(I2CBusPtr b, I2CSlaveAddr addr, Bool force) +{ + TDA8425Ptr t; + + t = xcalloc(1, sizeof(TDA8425Rec)); + if(t == NULL) return NULL; + t->d.DevName = "TDA8425 BTSC Stereo Audio Processor"; + t->d.SlaveAddr = addr; + t->d.pI2CBus = b; + t->d.NextDev = NULL; + t->d.StartTimeout = b->StartTimeout; + t->d.BitTimeout = b->BitTimeout; + t->d.AcknTimeout = b->AcknTimeout; + t->d.ByteTimeout = b->ByteTimeout; + + if(!force && !I2CProbeAddress(b, addr)) + { + xfree(t); + return NULL; + } + + /* set default parameters */ + if(!I2CDevInit(&(t->d))) + { + xfree(t); + return NULL; + } + + return t; +} + +Bool tda8425_init(TDA8425Ptr t) +{ + t->stereo = 3; /* 3 = Spacial 2 = Linear 1 = Pseudo 0 = Forced mono */ + t->v_left = 0xFF; /* FF - C0 */ + t->v_right = 0xFF; /* FF - C0 */ + t->bass = 0xF6; /* 0xFF - 0xF0 */ + t->treble = 0xF6; /* 0xFF - 0xF0 */ + t->src_sel = 3; /* 3 - stereo */ + t->mute = TRUE; + t->mux = 0; /* 0 - source one, 1 -source 2 */ + + tda8425_setaudio(t); + return TRUE; +} + +void tda8425_setaudio(TDA8425Ptr t) +{ + I2CByte data[2]; + + TDA8425(0x00, t->v_left ); + TDA8425(0x01, t->v_right ); + TDA8425(0x02, t->bass ); + TDA8425(0x03, t->treble ); + TDA8425(0x08, 0xC0 | (t->mute ? 0x20 : 0x0) | (t->stereo << 3) | (t->src_sel << 1) | + t->mux); +} + +void tda8425_mute(TDA8425Ptr t, Bool mute) +{ + t->mute = mute; + tda8425_setaudio(t); +} diff --git a/xorg-server/hw/xfree86/i2c/tda8425.h b/xorg-server/hw/xfree86/i2c/tda8425.h new file mode 100644 index 000000000..4abb4175f --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda8425.h @@ -0,0 +1,42 @@ +#ifndef __TDA8425_H__ +#define __TDA8425_H__ + +#include "xf86i2c.h" + +typedef struct { + I2CDevRec d; + + int mux; + int stereo; + int v_left; + int v_right; + int bass; + int treble; + int src_sel; + Bool mute; + } TDA8425Rec, *TDA8425Ptr; + +#define TDA8425_ADDR_1 0x82 + +/* the third parameter is meant to force detection of tda8425. + This is because tda8425 is write-only and complete implementation + of I2C protocol is not always available. Besides address there is no good + way to autodetect it so we have to _know_ it is there anyway */ + +TDA8425Ptr Detect_tda8425(I2CBusPtr b, I2CSlaveAddr addr,Bool force); +Bool tda8425_init(TDA8425Ptr t); +void tda8425_setaudio(TDA8425Ptr t); +void tda8425_mute(TDA8425Ptr t, Bool mute); + +#define TDA8425SymbolsList \ + "Detect_tda8425", \ + "tda8425_init", \ + "tda8425_setaudio", \ + "tda8425_mute" + +#define xf86_Detect_tda8425 ((TDA8425Ptr (*)(I2CBusPtr, I2CSlaveAddr,Bool))LoaderSymbol("Detect_tda8425")) +#define xf86_tda8425_init ((Bool (*)(TDA8425Ptr))LoaderSymbol("tda8425_init")) +#define xf86_tda8425_setaudio ((void (*)(TDA8425Ptr))LoaderSymbol("tda8425_setaudio")) +#define xf86_tda8425_mute ((void (*)(TDA8425Ptr, Bool))LoaderSymbol("tda8425_mute")) + +#endif diff --git a/xorg-server/hw/xfree86/i2c/tda8425_module.c b/xorg-server/hw/xfree86/i2c/tda8425_module.c new file mode 100644 index 000000000..7906e5ea5 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda8425_module.c @@ -0,0 +1,32 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86Module.h" + +static MODULESETUPPROTO(tda8425Setup); + +static XF86ModuleVersionInfo tda8425VersRec = +{ + "tda8425", + MODULEVENDORSTRING, + MODINFOSTRING1, + MODINFOSTRING2, + XORG_VERSION_CURRENT, + 1, 0, 0, + ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ + ABI_VIDEODRV_VERSION, + MOD_CLASS_NONE, + {0,0,0,0} +}; + +_X_EXPORT XF86ModuleData tda8425ModuleData = { + &tda8425VersRec, + tda8425Setup, + NULL +}; + +static pointer +tda8425Setup(pointer module, pointer opts, int *errmaj, int *errmin) { + return (pointer)1; +} diff --git a/xorg-server/hw/xfree86/i2c/tda9850.c b/xorg-server/hw/xfree86/i2c/tda9850.c new file mode 100644 index 000000000..5b0c581ed --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda9850.c @@ -0,0 +1,112 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86.h" +#include "xf86i2c.h" +#include "tda9850.h" +#include "i2c_def.h" + +#define TDA9850(a,b) { \ + data[0]=a; \ + data[1]=b; \ + I2C_WriteRead(&(t->d), data, 2, NULL, 0); \ + } + +TDA9850Ptr Detect_tda9850(I2CBusPtr b, I2CSlaveAddr addr) +{ + TDA9850Ptr t; + I2CByte a; + + t = xcalloc(1, sizeof(TDA9850Rec)); + if(t == NULL) return NULL; + switch(addr) + { + case TDA9850_ADDR_1: + t->d.DevName = "TDA9850 BTSC Stereo+SAP Audio Processor"; + break; + default: + t->d.DevName = "Generic TDAxxxx"; + break; + } + t->d.SlaveAddr = addr; + t->d.pI2CBus = b; + t->d.NextDev = NULL; + t->d.StartTimeout = b->StartTimeout; + t->d.BitTimeout = b->BitTimeout; + t->d.AcknTimeout = b->AcknTimeout; + t->d.ByteTimeout = b->ByteTimeout; + + if(!I2C_WriteRead(&(t->d), NULL, 0, &a, 1)) + { + xfree(t); + return NULL; + } + + /* set default parameters */ + if(!I2CDevInit(&(t->d))) + { + xfree(t); + return NULL; + } + + return t; +} + +Bool tda9850_init(TDA9850Ptr t) +{ + t->stereo = 1; + t->sap = 0; + t->mute = TRUE; + t->sap_mute = TRUE; + tda9850_setaudio(t); + return TRUE; +} + +void tda9850_setaudio(TDA9850Ptr t) +{ +CARD8 data[2]; + +if(t->mux==2) +{ + TDA9850(0x04,0x0F); TDA9850(0x05,0x0F); TDA9850(0x06, 0x58); + TDA9850(0x07,0x07); TDA9850(0x08,0x00); + TDA9850(0x09,0x00); TDA9850(0x0A,0x03); +} else +{ + TDA9850(0x04,0x07); TDA9850(0x05,0x07); + TDA9850(0x06,0x58); TDA9850(0x07,0x07); + TDA9850(0x08,0x10); TDA9850(0x09,0x10); + TDA9850(0x0A,0x03); +} + +TDA9850(0x06,(t->stereo<<6)|(t->sap<<7)|(t->mute?0x8:0)|(t->sap_mute?0x10:0x0)); +} + +void tda9850_mute(TDA9850Ptr t, Bool mute) +{ +CARD8 data[2]; + +xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO, "tda9850_mute %s\n", mute ? "on" : "off"); +t->mute = mute; + +TDA9850(0x06,(t->stereo<<6)|(t->sap<<7)|(t->mute?0x8:0x0)|(t->sap_mute?0x10:0x0)); +} + +void tda9850_sap_mute(TDA9850Ptr t, Bool sap_mute) +{ +CARD8 data[2]; + +xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO, "tda9850_sap_mute %s\n", sap_mute ? "on" : "off"); +t->sap_mute = sap_mute; + +TDA9850(0x06,(t->stereo<<6)|(t->sap<<7)|(t->mute?0x8:0x0)|(t->sap_mute?0x10:0x0)); +} + +CARD16 tda9850_getstatus(TDA9850Ptr t) +{ +CARD16 status; + +I2C_WriteRead(&(t->d), NULL, 0, (I2CByte *)&status, 2); +return status; +} diff --git a/xorg-server/hw/xfree86/i2c/tda9850.h b/xorg-server/hw/xfree86/i2c/tda9850.h new file mode 100644 index 000000000..d5dec36fe --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda9850.h @@ -0,0 +1,39 @@ +#ifndef __TDA9850_H__ +#define __TDA9850_H__ + +#include "xf86i2c.h" + +typedef struct { + I2CDevRec d; + + int mux; + int stereo; + int sap; + Bool mute; + Bool sap_mute; + } TDA9850Rec, *TDA9850Ptr; + +#define TDA9850_ADDR_1 0xB4 + +TDA9850Ptr Detect_tda9850(I2CBusPtr b, I2CSlaveAddr addr); +Bool tda9850_init(TDA9850Ptr t); +void tda9850_setaudio(TDA9850Ptr t); +void tda9850_mute(TDA9850Ptr t, Bool mute); +void tda9850_sap_mute(TDA9850Ptr t, Bool sap_mute); +CARD16 tda9850_getstatus(TDA9850Ptr t); + +#define TDA9850SymbolsList \ + "Detect_tda9850", \ + "tda9850_init", \ + "tda9850_setaudio", \ + "tda9850_mute", \ + "tda9850_sap_mute" + +#define xf86_Detect_tda9850 ((TDA9850Ptr (*)(I2CBusPtr, I2CSlaveAddr))LoaderSymbol("Detect_tda9850")) +#define xf86_tda9850_init ((Bool (*)(TDA9850Ptr))LoaderSymbol("tda9850_init")) +#define xf86_tda9850_setaudio ((void (*)(TDA9850Ptr))LoaderSymbol("tda9850_setaudio")) +#define xf86_tda9850_mute ((void (*)(TDA9850Ptr, Bool))LoaderSymbol("tda9850_mute")) +#define xf86_tda9850_sap_mute ((void (*)(TDA9850Ptr, Bool))LoaderSymbol("tda9850_sap_mute")) +#define xf86_tda9850_getstatus ((CARD16 (*)(TDA9850Ptr))LoaderSymbol("tda9850_getstatus")) + +#endif diff --git a/xorg-server/hw/xfree86/i2c/tda9850_module.c b/xorg-server/hw/xfree86/i2c/tda9850_module.c new file mode 100644 index 000000000..84f7e861e --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda9850_module.c @@ -0,0 +1,32 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86Module.h" + +static MODULESETUPPROTO(tda9850Setup); + +static XF86ModuleVersionInfo tda9850VersRec = +{ + "tda9850", + MODULEVENDORSTRING, + MODINFOSTRING1, + MODINFOSTRING2, + XORG_VERSION_CURRENT, + 1, 0, 0, + ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ + ABI_VIDEODRV_VERSION, + MOD_CLASS_NONE, + {0,0,0,0} +}; + +_X_EXPORT XF86ModuleData tda9850ModuleData = { + &tda9850VersRec, + tda9850Setup, + NULL +}; + +static pointer +tda9850Setup(pointer module, pointer opts, int *errmaj, int *errmin) { + return (pointer)1; +} diff --git a/xorg-server/hw/xfree86/i2c/tda9885.c b/xorg-server/hw/xfree86/i2c/tda9885.c new file mode 100644 index 000000000..4147dfdd7 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda9885.c @@ -0,0 +1,104 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86.h" +#include "xf86i2c.h" +#include "tda9885.h" +#include "i2c_def.h" + + +TDA9885Ptr Detect_tda9885(I2CBusPtr b, I2CSlaveAddr addr) +{ + TDA9885Ptr t; + I2CByte a; + + t = xcalloc(1, sizeof(TDA9885Rec)); + if(t == NULL) return NULL; + switch(addr) + { + case TDA9885_ADDR_1: + case TDA9885_ADDR_2: + case TDA9885_ADDR_3: + case TDA9885_ADDR_4: + t->d.DevName = "TDA9885 Alignment-free IF-PLL"; + break; + default: + t->d.DevName = "Generic TDAxxxx"; + break; + } + t->d.SlaveAddr = addr; + t->d.pI2CBus = b; + t->d.NextDev = NULL; + t->d.StartTimeout = b->StartTimeout; + t->d.BitTimeout = b->BitTimeout; + t->d.AcknTimeout = b->AcknTimeout; + t->d.ByteTimeout = b->ByteTimeout; + + if(!I2C_WriteRead(&(t->d), NULL, 0, &a, 1)) + { + xfree(t); + return NULL; + } + + /* set default parameters */ + if(!I2CDevInit(&(t->d))) + { + xfree(t); + return NULL; + } + + return t; +} + +Bool tda9885_init(TDA9885Ptr t) +{ + t->forced_mute_audio=1; + return TRUE; +} + +void tda9885_getstatus(TDA9885Ptr t) +{ +CARD8 value; + +I2C_WriteRead(&(t->d), NULL, 0, &value, 1); +t->after_reset=value & 1; +t->afc_status=(value >> 1) & 0xf; +t->fm_carrier=(value>>5)& 1; +t->vif_level=(value >>6) & 1; +t->afc_win=(value >> 7)&1; +} + +void tda9885_setparameters(TDA9885Ptr t) +{ +CARD8 data[4]; + +data[0]=0; /* start with subaddress 0 */ +data[1]=(t->sound_trap & 1) | + ((t->auto_mute_fm &1)<<1) | + ((t->carrier_mode &1)<<2) | + ((t->modulation &3)<<3) | + ((t->forced_mute_audio &1)<<5) | + ((t->port1 & 1)<<6) | + ((t->port2 &1)<<7); /* B data */ +data[2]=(t->top_adjustment & 0x1f) | + ((t->deemphasis & 0x3)<<5) | + ((t->audio_gain & 1) << 7); /* C data */ +data[3]=(t->standard_sound_carrier & 0x3) | + ((t->standard_video_if & 0x07)<<2) | + ((t->minimum_gain & 0x01)<<5) | + ((t->gating & 0x01)<<6) | + ((t->vif_agc & 0x01)<<7); /* E data */ + +I2C_WriteRead(&(t->d), data, 4, NULL, 0); + +xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"TDA9885 setparam: B data: %x, C data: %x, E data: %x\n", data[1], data[2], data[3]); +} + +void tda9885_dumpstatus(TDA9885Ptr t) +{ +xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"TDA9885 status: after_reset=%d afc_status=%d (%3.1f kHz off) fm_carrier=%d vif_level=%d afc_win=%d %s\n", + t->after_reset, t->afc_status, + (t->afc_status<8)?-12.5-t->afc_status*25.0:-12.5+(16-t->afc_status)*25.0, + t->fm_carrier, t->vif_level, t->afc_win, t->afc_win?"VCO in": "VCO out"); +} diff --git a/xorg-server/hw/xfree86/i2c/tda9885.h b/xorg-server/hw/xfree86/i2c/tda9885.h new file mode 100644 index 000000000..46ae9fc0d --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda9885.h @@ -0,0 +1,60 @@ +#ifndef __TDA9885_H__ +#define __TDA9885_H__ + +#include "xf86i2c.h" + +typedef struct { + I2CDevRec d; + + /* write-only parameters */ + /* B DATA */ + CARD8 sound_trap; + CARD8 auto_mute_fm; + CARD8 carrier_mode; + CARD8 modulation; + CARD8 forced_mute_audio; + CARD8 port1; + CARD8 port2; + /* C DATA */ + CARD8 top_adjustment; + CARD8 deemphasis; + CARD8 audio_gain; + /* E DATA */ + CARD8 standard_sound_carrier; + CARD8 standard_video_if; + CARD8 minimum_gain; + CARD8 gating; + CARD8 vif_agc; + /* read-only values */ + + CARD8 after_reset; + CARD8 afc_status; + CARD8 vif_level; + CARD8 afc_win; + CARD8 fm_carrier; + } TDA9885Rec, *TDA9885Ptr; + +#define TDA9885_ADDR_1 0x86 +#define TDA9885_ADDR_2 0x84 +#define TDA9885_ADDR_3 0x96 +#define TDA9885_ADDR_4 0x94 + +TDA9885Ptr Detect_tda9885(I2CBusPtr b, I2CSlaveAddr addr); +Bool tda9885_init(TDA9885Ptr t); +void tda9885_setparameters(TDA9885Ptr t); +void tda9885_getstatus(TDA9885Ptr t); +void tda9885_dumpstatus(TDA9885Ptr t); + +#define TDA9885SymbolsList \ + "Detect_tda9885", \ + "tda9885_init", \ + "tda9885_setaudio", \ + "tda9885_mute" + +#define xf86_Detect_tda9885 ((TDA9885Ptr (*)(I2CBusPtr, I2CSlaveAddr))LoaderSymbol("Detect_tda9885")) +#define xf86_tda9885_init ((Bool (*)(TDA9885Ptr))LoaderSymbol("tda9885_init")) +#define xf86_tda9885_setparameters ((void (*)(TDA9885Ptr))LoaderSymbol("tda9885_setparameters")) +#define xf86_tda9885_getstatus ((void (*)(TDA9885Ptr))LoaderSymbol("tda9885_getstatus")) +#define xf86_tda9885_dumpstatus ((void (*)(TDA9885Ptr))LoaderSymbol("tda9885_dumpstatus")) + +#endif diff --git a/xorg-server/hw/xfree86/i2c/tda9885_module.c b/xorg-server/hw/xfree86/i2c/tda9885_module.c new file mode 100644 index 000000000..0ce85bba3 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/tda9885_module.c @@ -0,0 +1,32 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86Module.h" + +static MODULESETUPPROTO(tda9885Setup); + +static XF86ModuleVersionInfo tda9885VersRec = +{ + "tda9885", + MODULEVENDORSTRING, + MODINFOSTRING1, + MODINFOSTRING2, + XORG_VERSION_CURRENT, + 1, 0, 0, + ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ + ABI_VIDEODRV_VERSION, + MOD_CLASS_NONE, + {0,0,0,0} +}; + +_X_EXPORT XF86ModuleData tda9885ModuleData = { + &tda9885VersRec, + tda9885Setup, + NULL +}; + +static pointer +tda9885Setup(pointer module, pointer opts, int *errmaj, int *errmin) { + return (pointer)1; +} diff --git a/xorg-server/hw/xfree86/i2c/uda1380.c b/xorg-server/hw/xfree86/i2c/uda1380.c new file mode 100644 index 000000000..defda3cdc --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/uda1380.c @@ -0,0 +1,183 @@ +/************************************************************************************* + * Copyright (C) 2005 Bogdan D. bogdand@users.sourceforge.net + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of this + * software and associated documentation files (the "Software"), to deal in the Software + * without restriction, including without limitation the rights to use, copy, modify, + * merge, publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all copies or + * substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE + * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of the author shall not be used in advertising or + * otherwise to promote the sale, use or other dealings in this Software without prior written + * authorization from the author. + * + ************************************************************************************/ + +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86.h" +#include "xf86i2c.h" +#include "uda1380.h" +#include "i2c_def.h" + +UDA1380Ptr Detect_uda1380(I2CBusPtr b, I2CSlaveAddr addr) +{ + UDA1380Ptr t; + I2CByte a; + + t = xcalloc(1, sizeof(UDA1380Rec)); + if(t == NULL) return NULL; + switch(addr) + { + case UDA1380_ADDR_1: + case UDA1380_ADDR_2: + t->d.DevName = "UDA1380 Stereo audion coder-decoder"; + break; + default: + t->d.DevName = "Generic UDAxxxx"; + break; + } + t->d.SlaveAddr = addr; + t->d.pI2CBus = b; + t->d.NextDev = NULL; + t->d.StartTimeout = b->StartTimeout; + t->d.BitTimeout = b->BitTimeout; + t->d.AcknTimeout = b->AcknTimeout; + t->d.ByteTimeout = b->ByteTimeout; + + if(!I2C_WriteRead(&(t->d), NULL, 0, &a, 1)) + { + xfree(t); + return NULL; + } + + /* set default parameters */ + if(!I2CDevInit(&(t->d))) + { + xfree(t); + return NULL; + } + + xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 stereo coder-decoder detected\n"); + + return t; +} + +Bool uda1380_init(UDA1380Ptr t) +{ + CARD8 data[3]; + CARD16 tmp; + Bool ret; + + /* Power control */ + data[0] = 0x02; + tmp = (1 << 13) | (1 << 10) | ( 1 << 8) | (1 << 7) | (1 << 6) | (1 << 3) | (1 << 1); + data[1] = (CARD8)((tmp >> 8) & 0xff); + data[2] = (CARD8)(tmp & 0xff); + ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0); + if (ret == FALSE) + { + xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to initialize\n"); + return FALSE; + } + + /* Analog mixer (AVC) */ + data[0] = 0x03; + /* the analog mixer is muted initially */ + data[1] = 0x3f; + data[2] = 0x3f; + ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0); + if (ret == FALSE) + { + xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to initialize\n"); + return FALSE; + } + + xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 initialized\n"); + + return TRUE; +} + +void uda1380_shutdown(UDA1380Ptr t) +{ + CARD8 data[3]; + Bool ret; + + /* Power control */ + data[0] = 0x02; + data[1] = 0; + data[2] = 0; + ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0); + if (ret == FALSE) + xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to shutdown\n"); +} + +void uda1380_setvolume(UDA1380Ptr t, INT32 value) +{ + CARD8 data[3]; + /* + * We have to scale the value ranging from -1000 to 1000 to 0x2c to 0 + */ + CARD8 volume = 47 - (CARD8)((value + 1000) * 47 / 2000); + Bool ret; + + t->analog_mixer_settings = ((volume << 8) & 0x3f00) | (volume & 0x3f); + + /* Analog mixer (AVC) */ + data[0] = 0x03; + data[1] = volume & 0x3f; + data[2] = volume & 0x3f; + ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0); + if (ret == FALSE) + xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to set volume\n"); +} + +void uda1380_mute(UDA1380Ptr t, Bool mute) +{ + CARD8 data[3]; + Bool ret; + + if (mute == TRUE) + { + /* Analog mixer (AVC) */ + data[0] = 0x03; + data[1] = 0xff; + data[2] = 0xff; + ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0); + if (ret == FALSE) + xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to mute\n"); + } + else + { + /* Analog mixer (AVC) */ + data[0] = 0x03; + data[1] = (CARD8)((t->analog_mixer_settings >> 8) & 0x3f); + data[2] = (CARD8)(t->analog_mixer_settings & 0x3f); + ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0); + if (ret == FALSE) + xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to unmute\n"); + } +} + +void uda1380_getstatus(UDA1380Ptr t) +{ +} + +void uda1380_setparameters(UDA1380Ptr t) +{ +} + +void uda1380_dumpstatus(UDA1380Ptr t) +{ +} diff --git a/xorg-server/hw/xfree86/i2c/uda1380.h b/xorg-server/hw/xfree86/i2c/uda1380.h new file mode 100644 index 000000000..e671d66f8 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/uda1380.h @@ -0,0 +1,75 @@ +/************************************************************************************* + * Copyright (C) 2005 Bogdan D. bogdand@users.sourceforge.net + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of this + * software and associated documentation files (the "Software"), to deal in the Software + * without restriction, including without limitation the rights to use, copy, modify, + * merge, publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all copies or + * substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE + * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of the author shall not be used in advertising or + * otherwise to promote the sale, use or other dealings in this Software without prior written + * authorization from the author. + * + * Revision 1.3 2005/09/24 21:56:00 bogdand + * Changed the license to a X/MIT one + * + * Revision 1.2 2005/07/01 22:43:11 daniels + * Change all misc.h and os.h references to . + * + * + ************************************************************************************/ + +#ifndef __UDA1380_H__ +#define __UDA1380_H__ + +#include "xf86i2c.h" + +typedef struct { + I2CDevRec d; + + CARD16 analog_mixer_settings; /* register 0x03 */ + + } UDA1380Rec, *UDA1380Ptr; + +#define UDA1380_ADDR_1 0x30 +#define UDA1380_ADDR_2 0x34 + +UDA1380Ptr Detect_uda1380(I2CBusPtr b, I2CSlaveAddr addr); +Bool uda1380_init(UDA1380Ptr t); +void uda1380_shutdown(UDA1380Ptr t); +void uda1380_setvolume(UDA1380Ptr t, INT32); +void uda1380_mute(UDA1380Ptr t, Bool); +void uda1380_setparameters(UDA1380Ptr t); +void uda1380_getstatus(UDA1380Ptr t); +void uda1380_dumpstatus(UDA1380Ptr t); + +#define UDA1380SymbolsList \ + "Detect_uda1380", \ + "uda1380_init", \ + "uda1380_shutdown", \ + "uda1380_setvolume", \ + "uda1380_mute", \ + "uda1380_setparameters", \ + "uda1380_getstatus", \ + "uda1380_dumpstatus" + +#define xf86_Detect_uda1380 ((UDA1380Ptr (*)(I2CBusPtr, I2CSlaveAddr))LoaderSymbol("Detect_uda1380")) +#define xf86_uda1380_init ((Bool (*)(UDA1380Ptr))LoaderSymbol("uda1380_init")) +#define xf86_uda1380_shutdown ((void (*)(UDA1380Ptr))LoaderSymbol("uda1380_shutdown")) +#define xf86_uda1380_setvolume ((void (*)(UDA1380Ptr, CARD16))LoaderSymbol("uda1380_setvolume")) +#define xf86_uda1380_mute ((void (*)(UDA1380Ptr, Bool))LoaderSymbol("uda1380_mute")) +#define xf86_uda1380_setparameters ((void (*)(UDA1380Ptr))LoaderSymbol("uda1380_setparameters")) +#define xf86_uda1380_getstatus ((void (*)(UDA1380Ptr))LoaderSymbol("uda1380_getstatus")) +#define xf86_uda1380_dumpstatus ((void (*)(UDA1380Ptr))LoaderSymbol("uda1380_dumpstatus")) + +#endif diff --git a/xorg-server/hw/xfree86/i2c/uda1380_module.c b/xorg-server/hw/xfree86/i2c/uda1380_module.c new file mode 100644 index 000000000..895f8c6f2 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/uda1380_module.c @@ -0,0 +1,32 @@ +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include "xf86Module.h" + +static MODULESETUPPROTO(uda1380Setup); + +static XF86ModuleVersionInfo uda1380VersRec = +{ + "uda1380", + MODULEVENDORSTRING, + MODINFOSTRING1, + MODINFOSTRING2, + XORG_VERSION_CURRENT, + 1, 0, 0, + ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */ + ABI_VIDEODRV_VERSION, + MOD_CLASS_NONE, + {0,0,0,0} +}; + +_X_EXPORT XF86ModuleData uda1380ModuleData = { + &uda1380VersRec, + uda1380Setup, + NULL +}; + +static pointer +uda1380Setup(pointer module, pointer opts, int *errmaj, int *errmin) { + return (pointer)1; +} diff --git a/xorg-server/hw/xfree86/i2c/xf86i2c.c b/xorg-server/hw/xfree86/i2c/xf86i2c.c new file mode 100644 index 000000000..5cc83faa3 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/xf86i2c.c @@ -0,0 +1,890 @@ +/* + * Copyright (C) 1998 Itai Nahshon, Michael Schimek + * + * The original code was derived from and inspired by + * the I2C driver from the Linux kernel. + * (c) 1998 Gerd Knorr + */ + + +#ifdef HAVE_XORG_CONFIG_H +#include +#endif + +#include +#include + +#include "misc.h" +#include "xf86.h" +#include "xf86_OSproc.h" + +#include +#include +#include +#include "scrnintstr.h" +#include "regionstr.h" +#include "windowstr.h" +#include "pixmapstr.h" +#include "validate.h" +#include "resource.h" +#include "gcstruct.h" +#include "dixstruct.h" + +#include "xf86i2c.h" + +#define I2C_TIMEOUT(x) /*(x)*/ /* Report timeouts */ +#define I2C_TRACE(x) /*(x)*/ /* Report progress */ + +/* Set which OSs have bad gettimeofday resolution. */ +#if defined(SVR4) && !defined(sun) +#define BAD_GETTIMEOFDAY_RESOLUTION +#endif + + +/* This is the default I2CUDelay function if not supplied by the driver. + * High level I2C interfaces implementing the bus protocol in hardware + * should supply this function too. + * + * Delay execution at least usec microseconds. + * All values 0 to 1e6 inclusive must be expected. + */ + +#ifdef BAD_GETTIMEOFDAY_RESOLUTION +/* + * This is temporary until a better, portable + * way is found. Adjust bogo_usec to match CPU speed. + */ +static int bogo_usec = 500; + +static void +I2CUDelay(I2CBusPtr b, int usec) +{ + volatile long i; + + if (usec > 0) + for (i = usec * bogo_usec; i > 0; i--) + /* (perhaps hw delay action) */; +} +#else +static void +I2CUDelay(I2CBusPtr b, int usec) +{ + struct timeval begin, cur; + long d_secs, d_usecs; + long diff; + + if (usec > 0) { + X_GETTIMEOFDAY(&begin); + do { + /* It would be nice to use {xf86}usleep, + * but usleep (1) takes >10000 usec ! + */ + X_GETTIMEOFDAY(&cur); + d_secs = (cur.tv_sec - begin.tv_sec); + d_usecs = (cur.tv_usec - begin.tv_usec); + diff = d_secs*1000000 + d_usecs; + } while (diff>=0 && diff< (usec + 1)); + } +} +#endif + +/* Most drivers will register just with GetBits/PutBits functions. + * The following functions implement a software I2C protocol + * by using the promitive functions given by the driver. + * ================================================================ + * + * It is assumed that there is just one master on the I2C bus, therefore + * there is no explicit test for conflits. + */ + +#define RISEFALLTIME 2 /* usec, actually 300 to 1000 ns according to the i2c specs */ + +/* Some devices will hold SCL low to slow down the bus or until + * ready for transmission. + * + * This condition will be noticed when the master tries to raise + * the SCL line. You can set the timeout to zero if the slave device + * does not support this clock synchronization. + */ + +static Bool +I2CRaiseSCL(I2CBusPtr b, int sda, int timeout) +{ + int i, scl; + + b->I2CPutBits(b, 1, sda); + b->I2CUDelay(b, b->RiseFallTime); + + for (i = timeout; i > 0; i -= b->RiseFallTime) { + b->I2CGetBits(b, &scl, &sda); + if (scl) break; + b->I2CUDelay(b, b->RiseFallTime); + } + + if (i <= 0) { + I2C_TIMEOUT(ErrorF("[I2CRaiseSCL(<%s>, %d, %d) timeout]", b->BusName, sda, timeout)); + return FALSE; + } + + return TRUE; +} + +/* Send a start signal on the I2C bus. The start signal notifies + * devices that a new transaction is initiated by the bus master. + * + * The start signal is always followed by a slave address. + * Slave addresses are 8+ bits. The first 7 bits identify the + * device and the last bit signals if this is a read (1) or + * write (0) operation. + * + * There may be more than one start signal on one transaction. + * This happens for example on some devices that allow reading + * of registers. First send a start bit followed by the device + * address (with the last bit 0) and the register number. Then send + * a new start bit with the device address (with the last bit 1) + * and then read the value from the device. + * + * Note this is function does not implement a multiple master + * arbitration procedure. + */ + +static Bool +I2CStart(I2CBusPtr b, int timeout) +{ + if (!I2CRaiseSCL(b, 1, timeout)) + return FALSE; + + b->I2CPutBits(b, 1, 0); + b->I2CUDelay(b, b->HoldTime); + b->I2CPutBits(b, 0, 0); + b->I2CUDelay(b, b->HoldTime); + + I2C_TRACE(ErrorF("\ni2c: <")); + + return TRUE; +} + +/* This is the default I2CStop function if not supplied by the driver. + * + * Signal devices on the I2C bus that a transaction on the + * bus has finished. There may be more than one start signal + * on a transaction but only one stop signal. + */ + +static void +I2CStop(I2CDevPtr d) +{ + I2CBusPtr b = d->pI2CBus; + + b->I2CPutBits(b, 0, 0); + b->I2CUDelay(b, b->RiseFallTime); + + b->I2CPutBits(b, 1, 0); + b->I2CUDelay(b, b->HoldTime); + b->I2CPutBits(b, 1, 1); + b->I2CUDelay(b, b->HoldTime); + + I2C_TRACE(ErrorF(">\n")); +} + +/* Write/Read a single bit to/from a device. + * Return FALSE if a timeout occurs. + */ + +static Bool +I2CWriteBit(I2CBusPtr b, int sda, int timeout) +{ + Bool r; + + b->I2CPutBits(b, 0, sda); + b->I2CUDelay(b, b->RiseFallTime); + + r = I2CRaiseSCL(b, sda, timeout); + b->I2CUDelay(b, b->HoldTime); + + b->I2CPutBits(b, 0, sda); + b->I2CUDelay(b, b->HoldTime); + + return r; +} + +static Bool +I2CReadBit(I2CBusPtr b, int *psda, int timeout) +{ + Bool r; + int scl; + + r = I2CRaiseSCL(b, 1, timeout); + b->I2CUDelay(b, b->HoldTime); + + b->I2CGetBits(b, &scl, psda); + + b->I2CPutBits(b, 0, 1); + b->I2CUDelay(b, b->HoldTime); + + return r; +} + +/* This is the default I2CPutByte function if not supplied by the driver. + * + * A single byte is sent to the device. + * The function returns FALSE if a timeout occurs, you should send + * a stop condition afterwards to reset the bus. + * + * A timeout occurs, + * if the slave pulls SCL to slow down the bus more than ByteTimeout usecs, + * or slows down the bus for more than BitTimeout usecs for each bit, + * or does not send an ACK bit (0) to acknowledge the transmission within + * AcknTimeout usecs, but a NACK (1) bit. + * + * AcknTimeout must be at least b->HoldTime, the other timeouts can be + * zero according to the comment on I2CRaiseSCL. + */ + +static Bool +I2CPutByte(I2CDevPtr d, I2CByte data) +{ + Bool r; + int i, scl, sda; + I2CBusPtr b = d->pI2CBus; + + if (!I2CWriteBit(b, (data >> 7) & 1, d->ByteTimeout)) + return FALSE; + + for (i = 6; i >= 0; i--) + if (!I2CWriteBit(b, (data >> i) & 1, d->BitTimeout)) + return FALSE; + + b->I2CPutBits(b, 0, 1); + b->I2CUDelay(b, b->RiseFallTime); + + r = I2CRaiseSCL(b, 1, b->HoldTime); + + if (r) { + for (i = d->AcknTimeout; i > 0; i -= b->HoldTime) { + b->I2CUDelay(b, b->HoldTime); + b->I2CGetBits(b, &scl, &sda); + if (sda == 0) break; + } + + if (i <= 0) { + I2C_TIMEOUT(ErrorF("[I2CPutByte(<%s>, 0x%02x, %d, %d, %d) timeout]", + b->BusName, data, d->BitTimeout, + d->ByteTimeout, d->AcknTimeout)); + r = FALSE; + } + + I2C_TRACE(ErrorF("W%02x%c ", (int) data, sda ? '-' : '+')); + } + + b->I2CPutBits(b, 0, 1); + b->I2CUDelay(b, b->HoldTime); + + return r; +} + +/* This is the default I2CGetByte function if not supplied by the driver. + * + * A single byte is read from the device. + * The function returns FALSE if a timeout occurs, you should send + * a stop condition afterwards to reset the bus. + * + * A timeout occurs, + * if the slave pulls SCL to slow down the bus more than ByteTimeout usecs, + * or slows down the bus for more than b->BitTimeout usecs for each bit. + * + * ByteTimeout must be at least b->HoldTime, the other timeouts can be + * zero according to the comment on I2CRaiseSCL. + * + * For the byte in a sequence the acknowledge bit NACK (1), + * otherwise ACK (0) will be sent. + */ + +static Bool +I2CGetByte(I2CDevPtr d, I2CByte *data, Bool last) +{ + int i, sda; + I2CBusPtr b = d->pI2CBus; + + b->I2CPutBits(b, 0, 1); + b->I2CUDelay(b, b->RiseFallTime); + + if (!I2CReadBit(b, &sda, d->ByteTimeout)) + return FALSE; + + *data = (sda > 0) << 7; + + for (i = 6; i >= 0; i--) + if (!I2CReadBit(b, &sda, d->BitTimeout)) + return FALSE; + else + *data |= (sda > 0) << i; + + if (!I2CWriteBit(b, last ? 1 : 0, d->BitTimeout)) + return FALSE; + + I2C_TRACE(ErrorF("R%02x%c ", (int) *data, last ? '+' : '-')); + + return TRUE; +} + +/* This is the default I2CAddress function if not supplied by the driver. + * + * It creates the start condition, followed by the d->SlaveAddr. + * Higher level functions must call this routine rather than + * I2CStart/PutByte because a hardware I2C master may not be able + * to send a slave address without a start condition. + * + * The same timeouts apply as with I2CPutByte and additional a + * StartTimeout, similar to the ByteTimeout but for the start + * condition. + * + * In case of a timeout, the bus is left in a clean idle condition. + * I. e. you *must not* send a Stop. If this function succeeds, you *must*. + * + * The slave address format is 16 bit, with the legacy _8_bit_ slave address + * in the least significant byte. This is, the slave address must include the + * R/_W flag as least significant bit. + * + * The most significant byte of the address will be sent _after_ the LSB, + * but only if the LSB indicates: + * a) an 11 bit address, this is LSB = 1111 0xxx. + * b) a 'general call address', this is LSB = 0000 000x - see the I2C specs + * for more. + */ + +static Bool +I2CAddress(I2CDevPtr d, I2CSlaveAddr addr) +{ + if (I2CStart(d->pI2CBus, d->StartTimeout)) { + if (I2CPutByte(d, addr & 0xFF)) { + if ((addr & 0xF8) != 0xF0 && + (addr & 0xFE) != 0x00) + return TRUE; + + if (I2CPutByte(d, (addr >> 8) & 0xFF)) + return TRUE; + } + + I2CStop(d); + } + + return FALSE; +} + +/* These are the hardware independent I2C helper functions. + * ======================================================== + */ + +/* Function for probing. Just send the slave address + * and return true if the device responds. The slave address + * must have the lsb set to reflect a read (1) or write (0) access. + * Don't expect a read- or write-only device will respond otherwise. + */ + +Bool +xf86I2CProbeAddress(I2CBusPtr b, I2CSlaveAddr addr) +{ + int r; + I2CDevRec d; + + d.DevName = "Probing"; + d.BitTimeout = b->BitTimeout; + d.ByteTimeout = b->ByteTimeout; + d.AcknTimeout = b->AcknTimeout; + d.StartTimeout = b->StartTimeout; + d.SlaveAddr = addr; + d.pI2CBus = b; + d.NextDev = NULL; + + r = b->I2CAddress(&d, addr); + + if (r) b->I2CStop(&d); + + return r; +} + +/* All functions below are related to devices and take the + * slave address and timeout values from an I2CDevRec. They + * return FALSE in case of an error (presumably a timeout). + */ + +/* General purpose read and write function. + * + * 1st, if nWrite > 0 + * Send a start condition + * Send the slave address (1 or 2 bytes) with write flag + * Write n bytes from WriteBuffer + * 2nd, if nRead > 0 + * Send a start condition [again] + * Send the slave address (1 or 2 bytes) with read flag + * Read n bytes to ReadBuffer + * 3rd, if a Start condition has been successfully sent, + * Send a Stop condition. + * + * The functions exits immediately when an error occures, + * not proceeding any data left. However, step 3 will + * be executed anyway to leave the bus in clean idle state. + */ + +static Bool +I2CWriteRead(I2CDevPtr d, + I2CByte *WriteBuffer, int nWrite, + I2CByte *ReadBuffer, int nRead) +{ + Bool r = TRUE; + I2CBusPtr b = d->pI2CBus; + int s = 0; + + if (r && nWrite > 0) { + r = b->I2CAddress(d, d->SlaveAddr & ~1); + if (r) { + for (; nWrite > 0; WriteBuffer++, nWrite--) + if (!(r = b->I2CPutByte(d, *WriteBuffer))) + break; + s++; + } + } + + if (r && nRead > 0) { + r = b->I2CAddress(d, d->SlaveAddr | 1); + if (r) { + for (; nRead > 0; ReadBuffer++, nRead--) + if (!(r = b->I2CGetByte(d, ReadBuffer, nRead == 1))) + break; + s++; + } + } + + if (s) b->I2CStop(d); + + return r; +} + +/* wrapper - for compatibility and convinience */ + +Bool +xf86I2CWriteRead(I2CDevPtr d, + I2CByte *WriteBuffer, int nWrite, + I2CByte *ReadBuffer, int nRead) +{ + I2CBusPtr b = d->pI2CBus; + return b->I2CWriteRead(d,WriteBuffer,nWrite,ReadBuffer,nRead); +} + +/* Read a byte, the only readable register of a device. + */ + +Bool +xf86I2CReadStatus(I2CDevPtr d, I2CByte *pbyte) +{ + return xf86I2CWriteRead(d, NULL, 0, pbyte, 1); +} + +/* Read a byte from one of the registers determined by its sub-address. + */ + +Bool +xf86I2CReadByte(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte) +{ + return xf86I2CWriteRead(d, &subaddr, 1, pbyte, 1); +} + +/* Read bytes from subsequent registers determined by the + * sub-address of the first register. + */ + +Bool +xf86I2CReadBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte, int n) +{ + return xf86I2CWriteRead(d, &subaddr, 1, pbyte, n); +} + +/* Read a word (high byte, then low byte) from one of the registers + * determined by its sub-address. + */ + +Bool +xf86I2CReadWord(I2CDevPtr d, I2CByte subaddr, unsigned short *pword) +{ + I2CByte rb[2]; + + if (!xf86I2CWriteRead(d, &subaddr, 1, rb, 2)) return FALSE; + + *pword = (rb[0] << 8) | rb[1]; + + return TRUE; +} + +/* Write a byte to one of the registers determined by its sub-address. + */ + +Bool +xf86I2CWriteByte(I2CDevPtr d, I2CByte subaddr, I2CByte byte) +{ + I2CByte wb[2]; + + wb[0] = subaddr; + wb[1] = byte; + + return xf86I2CWriteRead(d, wb, 2, NULL, 0); +} + +/* Write bytes to subsequent registers determined by the + * sub-address of the first register. + */ + +Bool +xf86I2CWriteBytes(I2CDevPtr d, I2CByte subaddr, + I2CByte *WriteBuffer, int nWrite) +{ + I2CBusPtr b = d->pI2CBus; + Bool r = TRUE; + + if (nWrite > 0) { + r = b->I2CAddress(d, d->SlaveAddr & ~1); + if (r){ + if ((r = b->I2CPutByte(d, subaddr))) + for (; nWrite > 0; WriteBuffer++, nWrite--) + if (!(r = b->I2CPutByte(d, *WriteBuffer))) + break; + + b->I2CStop(d); + } + } + + return r; +} + +/* Write a word (high byte, then low byte) to one of the registers + * determined by its sub-address. + */ + +Bool +xf86I2CWriteWord(I2CDevPtr d, I2CByte subaddr, unsigned short word) +{ + I2CByte wb[3]; + + wb[0] = subaddr; + wb[1] = word >> 8; + wb[2] = word & 0xFF; + + return xf86I2CWriteRead(d, wb, 3, NULL, 0); +} + +/* Write a vector of bytes to not adjacent registers. This vector is, + * 1st byte sub-address, 2nd byte value, 3rd byte sub-address asf. + * This function is intended to initialize devices. Note this function + * exits immediately when an error occurs, some registers may + * remain uninitialized. + */ + +Bool +xf86I2CWriteVec(I2CDevPtr d, I2CByte *vec, int nValues) +{ + I2CBusPtr b = d->pI2CBus; + Bool r = TRUE; + int s = 0; + + if (nValues > 0) { + for (; nValues > 0; nValues--, vec += 2) { + if (!(r = b->I2CAddress(d, d->SlaveAddr & ~1))) + break; + + s++; + + if (!(r = b->I2CPutByte(d, vec[0]))) + break; + + if (!(r = b->I2CPutByte(d, vec[1]))) + break; + } + + if (s > 0) b->I2CStop(d); + } + + return r; +} + +/* Administrative functions. + * ========================= + */ + +/* Allocates an I2CDevRec for you and initializes with propper defaults + * you may modify before calling xf86I2CDevInit. Your I2CDevRec must + * contain at least a SlaveAddr, and a pI2CBus pointer to the bus this + * device shall be linked to. + * + * See function I2CAddress for the slave address format. Always set + * the least significant bit, indicating a read or write access, to zero. + */ + +I2CDevPtr +xf86CreateI2CDevRec(void) +{ + return xcalloc(1, sizeof(I2CDevRec)); +} + +/* Unlink an I2C device. If you got the I2CDevRec from xf86CreateI2CDevRec + * you should set to free it. + */ + +void +xf86DestroyI2CDevRec(I2CDevPtr d, Bool unalloc) +{ + if (d) { + I2CDevPtr *p; + + /* Remove this from the list of active I2C devices. */ + + for (p = &d->pI2CBus->FirstDev; *p != NULL; p = &(*p)->NextDev) + if (*p == d) { + *p = (*p)->NextDev; + break; + } + + xf86DrvMsg(d->pI2CBus->scrnIndex, X_INFO, + "I2C device \"%s:%s\" removed.\n", + d->pI2CBus->BusName, d->DevName); + + if (unalloc) xfree(d); + } +} + +/* I2C transmissions are related to an I2CDevRec you must link to a + * previously registered bus (see xf86I2CBusInit) before attempting + * to read and write data. You may call xf86I2CProbeAddress first to + * see if the device in question is present on this bus. + * + * xf86I2CDevInit will not allocate an I2CBusRec for you, instead you + * may enter a pointer to a statically allocated I2CDevRec or the (modified) + * result of xf86CreateI2CDevRec. + * + * If you don't specify timeouts for the device (n <= 0), it will inherit + * the bus-wide defaults. The function returns TRUE on success. + */ + +Bool +xf86I2CDevInit(I2CDevPtr d) +{ + I2CBusPtr b; + + if (d == NULL || + (b = d->pI2CBus) == NULL || + (d->SlaveAddr & 1) || + xf86I2CFindDev(b, d->SlaveAddr) != NULL) + return FALSE; + + if (d->BitTimeout <= 0) d->BitTimeout = b->BitTimeout; + if (d->ByteTimeout <= 0) d->ByteTimeout = b->ByteTimeout; + if (d->AcknTimeout <= 0) d->AcknTimeout = b->AcknTimeout; + if (d->StartTimeout <= 0) d->StartTimeout = b->StartTimeout; + + d->NextDev = b->FirstDev; + b->FirstDev = d; + + xf86DrvMsg(b->scrnIndex, X_INFO, + "I2C device \"%s:%s\" registered at address 0x%02X.\n", + b->BusName, d->DevName, d->SlaveAddr); + + return TRUE; +} + +I2CDevPtr +xf86I2CFindDev(I2CBusPtr b, I2CSlaveAddr addr) +{ + I2CDevPtr d; + + if (b) { + for (d = b->FirstDev; d != NULL; d = d->NextDev) + if (d->SlaveAddr == addr) + return d; + } + + return NULL; +} + +static I2CBusPtr I2CBusList; + +/* Allocates an I2CBusRec for you and initializes with propper defaults + * you may modify before calling xf86I2CBusInit. Your I2CBusRec must + * contain at least a BusName, a scrnIndex (or -1), and a complete set + * of either high or low level I2C function pointers. You may pass + * bus-wide timeouts, otherwise inplausible values will be replaced + * with safe defaults. + */ + +I2CBusPtr +xf86CreateI2CBusRec(void) +{ + I2CBusPtr b; + + b = (I2CBusPtr) xcalloc(1, sizeof(I2CBusRec)); + + if (b != NULL) { + b->scrnIndex = -1; + b->HoldTime = 5; /* 100 kHz bus */ + b->BitTimeout = 5; + b->ByteTimeout = 5; + b->AcknTimeout = 5; + b->StartTimeout = 5; + b->RiseFallTime = RISEFALLTIME; + } + + return b; +} + +/* Unregister an I2C bus. If you got the I2CBusRec from xf86CreateI2CBusRec + * you should set to free it. If you set , the function + * xf86DestroyI2CDevRec will be called for all devices linked to the bus + * first, passing down the option. + */ + +void +xf86DestroyI2CBusRec(I2CBusPtr b, Bool unalloc, Bool devs_too) +{ + if (b) { + I2CBusPtr *p; + + /* Remove this from the list of active I2C buses */ + + for (p = &I2CBusList; *p != NULL; p = &(*p)->NextBus) + if (*p == b) { + *p = (*p)->NextBus; + break; + } + + if (b->FirstDev != NULL) { + if (devs_too) { + I2CDevPtr d; + + while ((d = b->FirstDev) != NULL) { + b->FirstDev = d->NextDev; + xf86DestroyI2CDevRec(d, unalloc); + } + } else { + if (unalloc) { + xf86Msg(X_ERROR, "i2c bug: Attempt to remove I2C bus \"%s\", " + "but device list is not empty.\n", + b->BusName); + return; + } + } + } + + xf86DrvMsg(b->scrnIndex, X_INFO, "I2C bus \"%s\" removed.\n", + b->BusName); + + if (unalloc) xfree(b); + } +} + +/* I2C masters have to register themselves using this function. + * It will not allocate an I2CBusRec for you, instead you may enter + * a pointer to a statically allocated I2CBusRec or the (modified) + * result of xf86CreateI2CBusRec. Returns TRUE on success. + * + * At this point there won't be any traffic on the I2C bus. + */ + +Bool +xf86I2CBusInit(I2CBusPtr b) +{ + /* I2C buses must be identified by a unique scrnIndex + * and name. If scrnIndex is unspecified (a negative value), + * then the name must be unique throughout the server. + */ + + if (b->BusName == NULL || + xf86I2CFindBus(b->scrnIndex, b->BusName) != NULL) + return FALSE; + + /* If the high level functions are not + * supplied, use the generic functions. + * In this case we need the low-level + * function. + */ + if (b->I2CWriteRead == NULL) + { + b->I2CWriteRead=I2CWriteRead; + + if (b->I2CPutBits == NULL || + b->I2CGetBits == NULL) + { + if (b->I2CPutByte == NULL || + b->I2CGetByte == NULL || + b->I2CAddress == NULL || + b->I2CStart == NULL || + b->I2CStop == NULL) + return FALSE; + } else { + b->I2CPutByte = I2CPutByte; + b->I2CGetByte = I2CGetByte; + b->I2CAddress = I2CAddress; + b->I2CStop = I2CStop; + b->I2CStart = I2CStart; + } + } + + if (b->I2CUDelay == NULL) + b->I2CUDelay = I2CUDelay; + + if (b->HoldTime < 2) b->HoldTime = 5; + if (b->BitTimeout <= 0) b->BitTimeout = b->HoldTime; + if (b->ByteTimeout <= 0) b->ByteTimeout = b->HoldTime; + if (b->AcknTimeout <= 0) b->AcknTimeout = b->HoldTime; + if (b->StartTimeout <= 0) b->StartTimeout = b->HoldTime; + + /* Put new bus on list. */ + + b->NextBus = I2CBusList; + I2CBusList = b; + + xf86DrvMsg(b->scrnIndex, X_INFO, "I2C bus \"%s\" initialized.\n", + b->BusName); + + return TRUE; +} + +I2CBusPtr +xf86I2CFindBus(int scrnIndex, char *name) +{ + I2CBusPtr p; + + if (name != NULL) + for (p = I2CBusList; p != NULL; p = p->NextBus) + if (scrnIndex < 0 || p->scrnIndex == scrnIndex) + if (!strcmp(p->BusName, name)) + return p; + + return NULL; +} + +/* + * Return an array of I2CBusPtr's related to a screen. The caller is + * responsible for freeing the array. + */ +int +xf86I2CGetScreenBuses(int scrnIndex, I2CBusPtr **pppI2CBus) +{ + I2CBusPtr pI2CBus; + int n = 0; + + if (pppI2CBus) + *pppI2CBus = NULL; + + for (pI2CBus = I2CBusList; pI2CBus; pI2CBus = pI2CBus->NextBus) { + if ((pI2CBus->scrnIndex >= 0) && (pI2CBus->scrnIndex != scrnIndex)) + continue; + + n++; + + if (!pppI2CBus) + continue; + + *pppI2CBus = xnfrealloc(*pppI2CBus, n * sizeof(I2CBusPtr)); + (*pppI2CBus)[n - 1] = pI2CBus; + } + + return n; +} diff --git a/xorg-server/hw/xfree86/i2c/xf86i2c.h b/xorg-server/hw/xfree86/i2c/xf86i2c.h new file mode 100644 index 000000000..76d2ebf92 --- /dev/null +++ b/xorg-server/hw/xfree86/i2c/xf86i2c.h @@ -0,0 +1,96 @@ +/* + * Copyright (C) 1998 Itai Nahshon, Michael Schimek + */ + + +#ifndef _XF86I2C_H +#define _XF86I2C_H + +#include "regionstr.h" + +typedef unsigned char I2CByte; +typedef unsigned short I2CSlaveAddr; + +typedef struct _I2CBusRec *I2CBusPtr; +typedef struct _I2CDevRec *I2CDevPtr; + +/* I2C masters have to register themselves */ + +typedef struct _I2CBusRec { + char * BusName; + int scrnIndex; + + void (*I2CUDelay) (I2CBusPtr b, int usec); + + void (*I2CPutBits)(I2CBusPtr b, int scl, int sda); + void (*I2CGetBits)(I2CBusPtr b, int *scl, int *sda); + + /* Look at the generic routines to see how these functions should behave. */ + + Bool (*I2CStart) (I2CBusPtr b, int timeout); + Bool (*I2CAddress)(I2CDevPtr d, I2CSlaveAddr); + void (*I2CStop) (I2CDevPtr d); + Bool (*I2CPutByte)(I2CDevPtr d, I2CByte data); + Bool (*I2CGetByte)(I2CDevPtr d, I2CByte *data, Bool); + + DevUnion DriverPrivate; + + int HoldTime; /* 1 / bus clock frequency, 5 or 2 usec */ + + int BitTimeout; /* usec */ + int ByteTimeout; /* usec */ + int AcknTimeout; /* usec */ + int StartTimeout; /* usec */ + int RiseFallTime; /* usec */ + + I2CDevPtr FirstDev; + I2CBusPtr NextBus; + Bool (*I2CWriteRead)(I2CDevPtr d, I2CByte *WriteBuffer, int nWrite, + I2CByte *ReadBuffer, int nRead); +} I2CBusRec; + +I2CBusPtr xf86CreateI2CBusRec(void); +void xf86DestroyI2CBusRec(I2CBusPtr pI2CBus, Bool unalloc, Bool devs_too); +Bool xf86I2CBusInit(I2CBusPtr pI2CBus); +I2CBusPtr xf86I2CFindBus(int scrnIndex, char *name); +int xf86I2CGetScreenBuses(int scrnIndex, I2CBusPtr **pppI2CBus); + + +/* I2C slave devices */ + +typedef struct _I2CDevRec { + char * DevName; + + int BitTimeout; /* usec */ + int ByteTimeout; /* usec */ + int AcknTimeout; /* usec */ + int StartTimeout; /* usec */ + + I2CSlaveAddr SlaveAddr; + I2CBusPtr pI2CBus; + I2CDevPtr NextDev; + DevUnion DriverPrivate; +} I2CDevRec; + +I2CDevPtr xf86CreateI2CDevRec(void); +void xf86DestroyI2CDevRec(I2CDevPtr pI2CDev, Bool unalloc); +Bool xf86I2CDevInit(I2CDevPtr pI2CDev); +I2CDevPtr xf86I2CFindDev(I2CBusPtr, I2CSlaveAddr); + +/* See descriptions of these functions in xf86i2c.c */ + +Bool xf86I2CProbeAddress(I2CBusPtr pI2CBus, I2CSlaveAddr); +Bool xf86I2CWriteRead(I2CDevPtr d, I2CByte *WriteBuffer, int nWrite, + I2CByte *ReadBuffer, int nRead); +#define xf86I2CRead(d, rb, nr) xf86I2CWriteRead(d, NULL, 0, rb, nr) +Bool xf86I2CReadStatus(I2CDevPtr d, I2CByte *pbyte); +Bool xf86I2CReadByte(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte); +Bool xf86I2CReadBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte, int n); +Bool xf86I2CReadWord(I2CDevPtr d, I2CByte subaddr, unsigned short *pword); +#define xf86I2CWrite(d, wb, nw) xf86I2CWriteRead(d, wb, nw, NULL, 0) +Bool xf86I2CWriteByte(I2CDevPtr d, I2CByte subaddr, I2CByte byte); +Bool xf86I2CWriteBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *WriteBuffer, int nWrite); +Bool xf86I2CWriteWord(I2CDevPtr d, I2CByte subaddr, unsigned short word); +Bool xf86I2CWriteVec(I2CDevPtr d, I2CByte *vec, int nValues); + +#endif /*_XF86I2C_H */ -- cgit v1.2.3