The X server maintains a database of keyboard components, identified by component type. The database contains all the information necessary to build a complete keyboard description for a particular device, as well as to assemble partial descriptions. Table 20.1 identifies the component types and the type of information they contain. Component Type Component Primary Contents May also contain Keymap Complete keyboard description Normally assembled using a complete component from each of the other types Keycodes Symbolic name for each key Minimum and maximum legal keycodes Aliases for some keys Symbolic names for indicators Description of indicators physically present Types Key types Real modifier bindings and symbolic names for some virtual modifiers Compatibility Rules used to assign actions to keysyms Maps for some indicators Real modifier bindings and symbolic names for some virtual modifiers Symbols Symbol mapping for keyboard keys Modifier mapping Symbolic names for groups Explicit actions and behaviors for some keys Real modifier bindings and symbolic names for some virtual modifiers Geometry Layout of the keyboard Aliases for some keys; overrides keycodes component aliases Symbolic names for some indicators Description of indicators physically present While a keymap is a database entry for a complete keyboard description, and therefore logically different from the individual component database entries, the rules for processing keymap entries are identical to those for the individual components. In the discussion that follows, the term component is used to refer to either individual components or a keymap. There may be multiple entries for each of the component types. An entry may be either complete or partial. Partial entries describe only a piece of the corresponding keyboard component and are designed to be combined with other entries of the same type to form a complete entry. For example, a partial symbols map might describe the differences between a common ASCII keyboard and some national layout. Such a partial map is not useful on its own because it does not include those symbols that are the same on both the ASCII and national layouts (such as function keys). On the other hand, this partial map can be used to configure any ASCII keyboard to use a national layout. When a keyboard description is built, the components are processed in the order in which they appear in Table 20.1; later definitions override earlier ones. Component names have the form “class(member)” where class describes a subset of the available components for a particular type and the optional member identifies a specific component from that subset. For example, the name "atlantis(acme)" for a symbols component might specify the symbols used for the atlantis national keyboard layout by the vendor "acme." Each class has an optional default member — references that specify a class but not a member refer to the default member of the class, if one exists. Xkb places no constraints on the interpretation of the class and member names used in component names. The class and member names are both specified using characters from the Latin-1 character set. Xkb implementations must accept all alphanumeric characters, minus (‘-’) and underscore (‘_’) in class or member names, and must not accept parentheses, plus, vertical bar, percent sign, asterisk, question mark, or white space. The use of other characters is implementation-dependent. You may ask the server for a list of components for one or more component types. The request takes the form of a set of patterns, one pattern for each of the component types, including a pattern for the complete keyboard description. To obtain this list, use XkbListComponents. XkbListComponents XkbComponentListPtr XkbListComponents Display *dpy unsigned int device_spec XkbComponentNamesPtr ptrns int *max_inout dpy connection to X server device_spec device ID, or XkbUseCoreKbd ptrns namelist for components of interest max_inout max # returned names, # left over XkbListComponents queries the server for a list of component names matching the patterns specified in ptrns. It waits for a reply and returns the matching component names in an XkbComponentListRec structure. When you are done using the structure, you should free it using XkbFreeComponentList. device_spec indicates a particular device in which the caller is interested. A server is allowed (but not required) to restrict its reply to portions of the database that are relevant for that particular device. ptrns is a pointer to an XkbComponentNamesRec, described below. Each of the fields in ptrns contains a pattern naming the components of interest. Each of the patterns is composed of characters from the ISO Latin1 encoding, but can contain only parentheses, the wildcard characters ‘?’ and ‘*’, and characters permitted in a component class or member name (see section 20.1). A pattern may be NULL, in which case no components for that type is returned. Pattern matches with component names are case sensitive. The ‘?’ wildcard matches any single character, except a left or right parenthesis; the ‘*’ wildcard matches any number of characters, except a left or right parenthesis. If an implementation allows additional characters in a component class or member name other than those required by the Xkb extension (see section 20.1), the result of comparing one of the additional characters to either of the wildcard characters is implementation-dependent. If a pattern contains illegal characters, the illegal characters are ignored. The matching process is carried out as if the illegal characters were omitted from the pattern. max_inout is used to throttle the amount of data passed to and from the server. On input, it specifies the maximum number of names to be returned (the total number of names in all component categories). Upon return from XkbListComponents, max_inout contains the number of names that matched the request but were not returned because of the limit. XkbComponentNamesRec The component name patterns used to describe the request are passed to XkbListComponents using an XkbComponentNamesRec structure. This structure has no special allocation constraints or interrelationships with other structures; allocate and free this structure using standard malloc and free calls or their equivalent: typedef struct _XkbComponentNames { char * keymap; /* keymap names */ char * keycodes; /* keycode names */ char * types; /* type names */ char * compat; /* compatibility map names */ char * symbols; /* symbol names */ char * geometry; /* geometry names */ } XkbComponentNamesRec, *XkbComponentNamesPtr; XkbComponentListRec XkbComponentNameRec XkbListComponents returns a pointer to an XkbComponentListRec: typedef struct _XkbComponentList { int num_keymaps; /* number of entries in keymap */ int num_keycodes; /* number of entries in keycodes */ int num_types; /* number of entries in types */ int num_compat; /* number of entries in compat */ int num_symbols; /* number of entries in symbols */ int num_geometry; /* number of entries in geometry; XkbComponentNamePtr keymap; /* keymap names */ XkbComponentNamePtr keycodes; /* keycode names */ XkbComponentNamePtr types; /* type names */ XkbComponentNamePtr compat; /* compatibility map names */ XkbComponentNamePtr symbols; /* symbol names */ XkbComponentNamePtr geometry; /* geometry names */ } XkbComponentListRec, *XkbComponentListPtr; typedef struct _XkbComponentName { unsigned short flags; /* hints regarding component name */ char * name; /* name of component */ } XkbComponentNameRec, *XkbComponentNamePtr; Note that the structure used to specify patterns on input is an XkbComponentNamesRec, and that used to hold the individual component names upon return is an XkbComponentNameRec (no trailing ‘s’ in Name). When you are done using the structure returned by XkbListComponents, free it using XkbFreeComponentList. XkbFreeComponentList void XkbFreeComponentList XkbComponentListPtr list list pointer to XkbComponentListRec to free A set of flags is associated with each component; these flags provide additional hints about the component’s use. These hints are designated by bit masks in the flags field of the XkbComponentNameRec structures contained in the XkbComponentListRec returned from XkbListComponents. The least significant byte of the flags field has the same meaning for all types of keyboard components; the interpretation of the most significant byte is dependent on the type of component. The flags bits are defined in Table 20.2. The symbols hints in Table 20.2 apply only to partial symbols components (those with XkbLC_Partial also set); full symbols components are assumed to specify all of the pieces. The alphanumeric, modifier, keypad or function keys symbols hints should describe the primary intent of the component designer and should not be simply an exhaustive list of the kinds of keys that are affected. For example, national keyboard layouts affect primarily alphanumeric keys, but many affect a few modifier keys as well; such mappings should set only the XkbLC_AlphanumericKeys hint. In general, symbols components should set only one of the four flags ( XkbLC_AlternateGroup may be combined with any of the other flags). Component Type Component Hints (flags) Meaning Value All Components XkbLC_Hidden Do not present to user (1L<<0) XkbLC_Default Default member of class (1L<<1) XkbLC_Partial Partial component (1L<<2) Keymap none Keycodes none Types none Compatibility none Symbols XkbLC_AlphanumericKeys Bindings primarily for alphanumeric keyboard section (1L<<8) XkbLC_ModifierKeys Bindings primarily for modifier keys (1L<<9) XkbLC_KeypadKeys Bindings primarily for numeric keypad keys (1L<<10) XkbLC_FunctionKeys Bindings primarily for function keys (1L<<11) XkbLC_AlternateGroup Bindings for an alternate group (1L<<12) Geometry none A client may request that the server fetch one or more components from its database and use those components to build a new server keyboard description. The new keyboard description may be built from scratch, or it may be built starting with the current keyboard description for a particular device. Once the keyboard description is built, all or part of it may be returned to the client. The parts returned to the client need not include all of the parts used to build the description. At the time it requests the server to build a new keyboard description, a client may also request that the server use the new description internally to replace the current keyboard description for a specific device, in which case the behavior of the device changes accordingly. To build a new keyboard description from a set of named components, and to optionally have the server use the resulting description to replace an active one, use XkbGetKeyboardByName. XkbGetKeyboardByName XkbDescPtr XkbGetKeyboardByName Display *dpy unsigned int device_spec XkbComponentNamesPtr names unsigned int want unsigned int need Bool load dpy connection to X server device_spec device ID, or XkbUseCoreKbd names names of components to fetch want desired structures in returned record need mandatory structures in returned record load True ⇒ load into device_spec names contains a set of expressions describing the keyboard components the server should use to build the new keyboard description. want and need are bit fields describing the parts of the resulting keyboard description that should be present in the returned XkbDescRec. The individual fields in names are component expressions composed of keyboard component names (no wildcarding as may be used in XkbListComponents), the special component name symbol ‘%’, and the special operator characters ‘+’ and ‘|’. A component expression is parsed left to right, as follows: The special component name “computed” may be used in keycodes component expressions and refers to a component consisting of a set of keycodes computed automatically by the server as needed. The special component name “canonical” may be used in types component expressions and refers to a partial component defining the four standard key types: ALPHABETIC, ONE_LEVEL, TWO_LEVEL, and KEYPAD. The special component name ‘%’ refers to the keyboard description for the device specified in device_spec or the keymap names component. If a keymap names component is specified that does not begin with ‘+’ or ‘|’ and does not contain ‘%’, then ‘%’ refers to the description generated by the keymap names component. Otherwise, it refers to the keyboard description for device_spec. The ‘+’ operator specifies that the following component should override the currently assembled description; any definitions that are present in both components are taken from the second. The ‘|’ operator specifies that the next specified component should augment the currently assembled description; any definitions that are present in both components are taken from the first. If the component expression begins with an operator, a leading ‘%’ is implied. If any unknown or illegal characters appear anywhere in the expression, the entire expression is invalid and is ignored. For example, if names->symbols contained the expression "+de", it specifies that the default member of the "de" class of symbols should be applied to the current keyboard mapping, overriding any existing definitions (it could also be written "+de(default)"). Here is a slightly more involved example: the expression "acme(ascii)+de(basic)|iso9995-3" constructs a German (de) mapping for the ASCII keyboard supplied by the "acme" vendor. The new definition begins with the symbols for the ASCII keyboard for Acme (acme(ascii)), overrides them with definitions for the basic German keyboard (de(basic)), and then applies the definitions from the default iso9995-3 keyboard ( iso9995-3) to any undefined keys or groups of keys (part three of the iso9995 standard defines a common set of bindings for the secondary group, but allows national layouts to override those definitions where necessary). The interpretation of the above expression components (acme, ascii, de, basic, iso9995-3) is not defined by Xkb; only the operations and their ordering are. Note that the presence of a keymap names component that does not contain ‘%’ (either explicit or implied by virtue of an expression starting with an operator) indicates a description that is independent of the keyboard description for the device specified in device_spec. The same is true of requests in which the keymap names component is empty and all five other names components contain expressions void of references to ‘%’. Requests of this form allow you to deal with keyboard definitions independent of any actual device. The server parses all non- NULL fields in names and uses them to build a keyboard description. However, before parsing the expressions in names, the server ORs the bits in want and need together and examines the result in relationship to the expressions in names. Table 20.3 identifies the components that are required for each of the possible bits in want or need. If a required component has not been specified in the names structure (the corresponding field is NULL), the server substitutes the expression “%”, resulting in the component values being taken from device_spec. In addition, if load is True, the server modifies names if necessary (again using a “%” entry) to ensure all of the following fields are non- NULL: types, keycodes, symbols, and compat. want or need mask bit Required names Components value XkbGBN_TypesMask Types (1L<<0) XkbGBN_CompatMapMask Compat (1L<<1) XkbGBN_ClientSymbolsMask Types + Symbols + Keycodes (1L<<2) XkbGBN_ServerSymbolsMask Types + Symbols + Keycodes (1L<<3) XkbGBN_SymbolsMask Symbols (1L<<1) XkbGBN_IndicatorMapMask Compat (1L<<4) XkbGBN_KeyNamesMask Keycodes (1L<<5) XkbGBN_GeometryMask Geometry (1L<<6) XkbGBN_OtherNamesMask Types + Symbols + Keycodes + Compat + Geometry (1L<<7) XkbGBN_AllComponentsMask (0xff) need specifies a set of keyboard components that the server must be able to resolve in order for XkbGetKeyboardByName to succeed; if any of the components specified in need cannot be successfully resolved, XkbGetKeyboardByName fails. want specifies a set of keyboard components that the server should attempt to resolve, but that are not mandatory. If the server is unable to resolve any of these components, XkbGetKeyboardByName still succeeds. Bits specified in want that are also specified in need have no effect in the context of want. If load is True, the server updates its keyboard description for device_spec to match the result of the keyboard description just built. If load is False, the server’s description for device device_spec is not updated. In all cases, the parts specified by want and need from the just-built keyboard description are returned. The names structure in an XkbDescRec keyboard description record (see ) contains one field for each of the five component types used to build a keyboard description. When a keyboard description is built from a set of database components, the corresponding fields in this names structure are set to match the expressions used to build the component. The entire process of building a new keyboard description from the server database of components and returning all or part of it is diagrammed in Figure 20.1:

The information returned to the client in the XkbDescRec is essentially the result of a series of calls to extract information from a fictitious device whose description matches the one just built. The calls corresponding to each of the mask bits are summarized in Table 20.4, together with the XkbDescRec components that are filled in. Request (want+need) Fills in Xkb components Equivalent Function Call XkbGBN_TypesMask map.types XkbGetUpdatedMap(dpy, XkbTypesMask, Xkb) XkbGBN_ServerSymbolsMask server XkbGetUpdatedMap(dpy, XkbAllClientInfoMask, Xkb) XkbGBN_ClientSymbolsMask map, including map.types XkbGetUpdatedMap(dpy, XkbAllServerInfoMask, Xkb) XkbGBN_IndicatorMaps indicators XkbGetIndicatorMap(dpy, XkbAllIndicators, Xkb) XkbGBN_CompatMapMask compat XkbGetCompatMap(dpy, XkbAllCompatMask, Xkb) XkbGBN_GeometryMask geom XkbGetGeometry(dpy, Xkb) XkbGBN_KeyNamesMask names.keys names.key_aliases XkbGetNames(dpy, XkbKeyNamesMask | XkbKeyAliasesMask, Xkb) XkbGBN_OtherNamesMask names.keycodes names.geometry names.symbols names.types map.types[*].lvl_names[*] names.compat names.vmods names.indicators names.groups names.radio_groups names.phys_symbols XkbGetNames(dpy, XkbAllNamesMask & ~(XkbKeyNamesMask | XkbKeyAliasesMask), Xkb) There is no way to determine which components specified in want (but not in need) were actually fetched, other than breaking the call into successive calls to XkbGetKeyboardByName and specifying individual components. XkbGetKeyboardByName always sets min_key_code and max_key_code in the returned XkbDescRec structure. XkbGetKeyboardByName is synchronous; it sends the request to the server to build a new keyboard description and waits for the reply. If successful, the return value is non-NULL. XkbGetKeyboardByName generates a BadMatch protocol error if errors are encountered when building the keyboard description. If you simply want to obtain information about the current keyboard device, rather than generating a new keyboard description from elements in the server database, use XkbGetKeyboard (see section 6.2). XkbGetKeyboard XkbDescPtr XkbGetKeyboard Display *dpy unsigned int which unsigned int device_spec dpy connection to X server which mask of components of XkbDescRec of interest device_spec device ID XkbGetKeyboard is used to read the current description for one or more components of a keyboard device. It calls XkbGetKeyboardByName as follows: XkbGetKeyboardByName ( dpy, device_spec, NULL, which, which, False).