.\" $Xorg: CH04,v 1.3 2000/08/17 19:42:44 cpqbld Exp $ .\" Copyright \(co 1985, 1986, 1987, 1988, 1991, 1994 .\" X Consortium .\" .\" Permission is hereby granted, free of charge, to any person obtaining .\" a copy of this software and associated documentation files (the .\" "Software"), to deal in the Software without restriction, including .\" without limitation the rights to use, copy, modify, merge, publish, .\" distribute, sublicense, and/or sell copies of the Software, and to .\" permit persons to whom the Software is furnished to do so, subject to .\" the following conditions: .\" .\" The above copyright notice and this permission notice shall be included .\" in all copies or substantial portions of the Software. .\" .\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS .\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF .\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. .\" IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR .\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, .\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR .\" OTHER DEALINGS IN THE SOFTWARE. .\" .\" Except as contained in this notice, the name of the X Consortium shall .\" not be used in advertising or otherwise to promote the sale, use or .\" other dealings in this Software without prior written authorization .\" from the X Consortium. .\" .\" Copyright \(co 1985, 1986, 1987, 1988, 1991, 1994 .\" Digital Equipment Corporation, Maynard, Massachusetts. .\" .\" Permission to use, copy, modify and distribute this documentation for any .\" purpose and without fee is hereby granted, provided that the above copyright .\" notice appears in all copies and that both that copyright notice and this .\" permission notice appear in supporting documentation, and that the name of .\" Digital not be used in in advertising or publicity pertaining .\" to distribution of the software without specific, written prior permission. .\" Digital makes no representations about the suitability of the .\" software described herein for any purpose. .\" It is provided ``as is'' without express or implied warranty. .\" \& .sp 1 .ce 3 \s+1\fBChapter 4\fP\s-1 \s+1\fBShell Widgets\fP\s-1 .sp 2 .nr H1 4 .nr H2 0 .nr H3 0 .nr H4 0 .nr H5 0 .LP .XS Chapter 4 \(em Shell Widgets .XE .IN "Shell" "" "@DEF@" .LP Shell widgets hold an application's top-level widgets to allow them to communicate with the window manager and session manager. Shells have been designed to be as nearly invisible as possible. Clients have to create them, but they should never have to worry about their sizes. .LP If a shell widget is resized from the outside (typically by a window manager), the shell widget also resizes its managed child widget automatically. Similarly, if the shell's child widget needs to change size, it can make a geometry request to the shell, and the shell negotiates the size change with the outer environment. Clients should never attempt to change the size of their shells directly. .LP The five types of public shells are: .TS lw(1.5i) lw(4.25i). T{ .PN OverrideShell T} T{ Used for shell windows that completely bypass the window manager (for example, pop-up menu shells). T} .sp T{ .PN TransientShell T} T{ Used for shell windows that have the .PN \s-1WM_TRANSIENT_FOR\s+1 property set. The effect of this property is dependent upon the window manager being used. T} .sp T{ .PN TopLevelShell T} T{ Used for normal top-level windows (for example, any additional top-level widgets an application needs). T} .sp T{ .PN ApplicationShell T} T{ Formerly used for the single main top-level window that the window manager identifies as an application instance and made obsolete by SessionShell. T} .IN "ApplicationShell" "" "@DEF@" .sp T{ .PN SessionShell T} T{ Used for the single main top-level window that the window manager identifies as an application instance and that interacts with the session manager. T} .IN "SessionShell" "" "@DEF@" .TE .NH 2 Shell Widget Definitions .XS \*(SN Shell Widget Definitions .XE .LP Widgets negotiate their size and position with their parent widget, that is, the widget that directly contains them. Widgets at the top of the hierarchy do not have parent widgets. Instead, they must deal with the outside world. To provide for this, each top-level widget is encapsulated in a special widget, called a shell widget. .LP Shell widgets, whose class is a subclass of the Composite class, encapsulate other widgets and can allow a widget to avoid the geometry clipping imposed by the parent-child window relationship. They also can provide a layer of communication with the window manager. .LP The eight different types of shells are: .TS lw(1.5i) lw(4.5i). T{ .PN Shell T} T{ The base class for shell widgets; provides the fields needed for all types of shells. Shell is a direct subclass of .PN compositeWidgetClass . T} .sp 6p T{ .PN OverrideShell T} T{ A subclass of Shell; used for shell windows that completely bypass the window manager. T} .sp 6p T{ .PN WMShell T} T{ A subclass of Shell; contains fields needed by the common window manager protocol. T} .sp 6p T{ .PN VendorShell T} T{ A subclass of WMShell; contains fields used by vendor-specific window managers. T} .sp 6p T{ .PN TransientShell T} T{ A subclass of VendorShell; used for shell windows that desire the .PN \s-1WM_TRANSIENT_FOR\s+1 property. T} .sp 6p T{ .PN TopLevelShell T} T{ A subclass of VendorShell; used for normal top-level windows. T} .sp 6p T{ .PN ApplicationShell T} T{ A subclass of TopLevelShell; may be used for an application's additional root windows. T} .sp 6p T{ .PN SessionShell T} T{ A subclass of ApplicationShell; used for an application's main root window. T} .TE .LP Note that the classes Shell, WMShell, and VendorShell are internal and should not be instantiated or subclassed. Only OverrrideShell, TransientShell, TopLevelShell, ApplicationShell, and SessionShell are intended for public use. .NH 3 ShellClassPart Definitions .XS \*(SN ShellClassPart Definitions .XE .LP Only the Shell class has additional class fields, which are all contained in the .PN ShellClassExtensionRec . None of the other Shell classes have any additional class fields: .LP .KS .sM .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { XtPointer extension; } ShellClassPart, OverrideShellClassPart, WMShellClassPart, VendorShellClassPart, TransientShellClassPart, TopLevelShellClassPart, ApplicationShellClassPart, SessionShellClassPart; .De .LP .eM .KE The full Shell class record definitions are: .IN "ShellClassExtension" "" "@DEF@" .IN "ShellClassExtensionRec" "" "@DEF@" .LP .KS .sM .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct _ShellClassRec { CoreClassPart core_class; CompositeClassPart composite_class; ShellClassPart shell_class; } ShellClassRec; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { XtPointer next_extension; See Section 1.6.12 XrmQuark record_type; See Section 1.6.12 long version; See Section 1.6.12 Cardinal record_size; See Section 1.6.12 XtGeometryHandler root_geometry_manager; See below } ShellClassExtensionRec, *ShellClassExtension; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct _OverrideShellClassRec { CoreClassPart core_class; CompositeClassPart composite_class; ShellClassPart shell_class; OverrideShellClassPart override_shell_class; } OverrideShellClassRec; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct _WMShellClassRec { CoreClassPart core_class; CompositeClassPart composite_class; ShellClassPart shell_class; WMShellClassPart wm_shell_class; } WMShellClassRec; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct _VendorShellClassRec { CoreClassPart core_class; CompositeClassPart composite_class; ShellClassPart shell_class; WMShellClassPart wm_shell_class; VendorShellClassPart vendor_shell_class; } VendorShellClassRec; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct _TransientShellClassRec { CoreClassPart core_class; CompositeClassPart composite_class; ShellClassPart shell_class; WMShellClassPart wm_shell_class; VendorShellClassPart vendor_shell_class; TransientShellClassPart transient_shell_class; } TransientShellClassRec; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct _TopLevelShellClassRec { CoreClassPart core_class; CompositeClassPart composite_class; ShellClassPart shell_class; WMShellClassPart wm_shell_class; VendorShellClassPart vendor_shell_class; TopLevelShellClassPart top_level_shell_class; } TopLevelShellClassRec; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct _ApplicationShellClassRec { CoreClassPart core_class; CompositeClassPart composite_class; ShellClassPart shell_class; WMShellClassPart wm_shell_class; VendorShellClassPart vendor_shell_class; TopLevelShellClassPart top_level_shell_class; ApplicationShellClassPart application_shell_class; } ApplicationShellClassRec; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct _SessionShellClassRec { CoreClassPart core_class; CompositeClassPart composite_class; ShellClassPart shell_class; WMShellClassPart wm_shell_class; VendorShellClassPart vendor_shell_class; TopLevelShellClassPart top_level_shell_class; ApplicationShellClassPart application_shell_class; SessionShellClassPart session_shell_class; } SessionShellClassRec; .De .LP .eM .KE .KS The single occurrences of the class records and pointers for creating instances of shells are: .LP .sM .Ds 0 .TA .5i 3i .ta .5i 3i extern ShellClassRec shellClassRec; extern OverrideShellClassRec overrideShellClassRec; extern WMShellClassRec wmShellClassRec; extern VendorShellClassRec vendorShellClassRec; extern TransientShellClassRec transientShellClassRec; extern TopLevelShellClassRec topLevelShellClassRec; extern ApplicationShellClassRec applicationShellClassRec; extern SessionShellClassRec sessionShellClassRec; .sp extern WidgetClass shellWidgetClass; extern WidgetClass overrideShellWidgetClass; extern WidgetClass wmShellWidgetClass; extern WidgetClass vendorShellWidgetClass; extern WidgetClass transientShellWidgetClass; extern WidgetClass topLevelShellWidgetClass; extern WidgetClass applicationShellWidgetClass; extern WidgetClass sessionShellWidgetClass; .De .LP .eM .KE .KS The following opaque types and opaque variables are defined for generic operations on widgets whose class is a subclass of Shell. .TS lw(2.75i) lw(2.75i). _ .sp 6p Types Variables .sp 6p _ .sp 6p T{ .PN ShellWidget T} T{ .PN shellWidgetClass T} T{ .PN OverrideShellWidget T} T{ .PN overrideShellWidgetClass T} T{ .PN WMShellWidget T} T{ .PN wmShellWidgetClass T} T{ .PN VendorShellWidget T} T{ .PN vendorShellWidgetClass T} T{ .PN TransientShellWidget T} T{ .PN transientShellWidgetClass T} T{ .PN TopLevelShellWidget T} T{ .PN topLevelShellWidgetClass T} T{ .PN ApplicationShellWidget T} T{ .PN applicationShellWidgetClass T} T{ .PN SessionShellWidget T} T{ .PN sessionShellWidgetClass T} .PN ShellWidgetClass .PN OverrideShellWidgetClass .PN WMShellWidgetClass .PN VendorShellWidgetClass .PN TransientShellWidgetClass .PN TopLevelShellWidgetClass .PN ApplicationShellWidgetClass .PN SessionShellWidgetClass .sp 6p _ .TE .KE .LP The declarations for all Intrinsics-defined shells except VendorShell appear in .PN Shell.h and .PN ShellP.h . VendorShell has separate public and private .h files which are included by .PN Shell.h and .PN ShellP.h . .LP .PN Shell.h uses incomplete structure definitions to ensure that the compiler catches attempts to access private data in any of the Shell instance or class data structures. .LP The symbolic constant for the .PN ShellClassExtension version identifier is .PN XtShellExtensionVersion (see Section 1.6.12). .IN "XtShellExtensionVersion" "" "@DEF@" .LP .IN "Shell" "root_geometry_manager" .IN "root_geometry_manager procedure" The root_geometry_manager procedure acts as the parent geometry manager for geometry requests made by shell widgets. When a shell widget calls either .PN XtMakeGeometryRequest or .PN XtMakeResizeRequest , the root_geometry_manager procedure is invoked to negotiate the new geometry with the window manager. If the window manager permits the new geometry, the root_geometry_manager procedure should return .PN XtGeometryYes ; if the window manager denies the geometry request or does not change the window geometry within some timeout interval (equal to \fIwm_timeout\fP in the case of WMShells), the .IN "Shell" "wm_timeout" "@DEF@" .IN "wm_timeout" "" "@DEF@" root_geometry_manager procedure should return .PN XtGeometryNo . If the window manager makes some alternative geometry change, the root_geometry_manager procedure may return either .PN XtGeometryNo and handle the new geometry as a resize or .PN XtGeometryAlmost in anticipation that the shell will accept the compromise. If the compromise is not accepted, the new size must then be handled as a resize. Subclasses of Shell that wish to provide their own root_geometry_manager procedures are strongly encouraged to use enveloping to invoke their superclass's root_geometry_manager procedure under most situations, as the window manager interaction may be very complex. .LP If no .PN ShellClassPart extension record is declared with \fIrecord_type\fP equal to .PN \s-1NULLQUARK\s+1 , then .PN XtInheritRootGeometryManager is assumed. .NH 3 ShellPart Definition .XS \*(SN ShellPart Definition .XE .LP The various shell widgets have the following additional instance fields defined in their widget records: .LP .IN "ShellPart" "" "@DEF@" .KS .sM .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { String geometry; XtCreatePopupChildProc create_popup_child_proc; XtGrabKind grab_kind; Boolean spring_loaded; Boolean popped_up; Boolean allow_shell_resize; Boolean client_specified; Boolean save_under; Boolean override_redirect; XtCallbackList popup_callback; XtCallbackList popdown_callback; Visual * visual; } ShellPart; .De .KE .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { int empty; } OverrideShellPart; .De .Ds 0 .TA .5i 1i 1.5i 2.5i .ta .5i 1i 1.5i 2.5i typedef struct { String title; int wm_timeout; Boolean wait_for_wm; Boolean transient; Boolean urgency; Widget client_leader; String window_role; struct _OldXSizeHints { long flags; int x, y; int width, height; int min_width, min_height; int max_width, max_height; int width_inc, height_inc; struct { int x; int y; } min_aspect, max_aspect; } size_hints; XWMHints wm_hints; int base_width, base_height, win_gravity; Atom title_encoding; } WMShellPart; .De .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { int vendor_specific; } VendorShellPart; .De .KE .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { Widget transient_for; } TransientShellPart; typedef struct { String icon_name; Boolean iconic; Atom icon_name_encoding; } TopLevelShellPart; .De .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { char * class; XrmClass xrm_class; int argc; char ** argv; } ApplicationShellPart; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { SmcConn connection; String session_id; String * restart_command; String * clone_command; String * discard_command; String * resign_command; String * shutdown_command; String * environment; String current_dir; String program_path; unsigned char restart_style; Boolean join_session; XtCallbackList save_callbacks; XtCallbackList interact_callbacks; XtCallbackList cancel_callbacks; XtCallbackList save_complete_callbacks; XtCallbackList die_callbacks; XtCallbackList error_callbacks; } SessionShellPart; .De .LP .eM .KE .KS The full shell widget instance record definitions are: .LP .IN "ShellWidget" "" "@DEF@" .sM .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { CorePart core; CompositePart composite; ShellPart shell; } ShellRec, *ShellWidget; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { CorePart core; CompositePart composite; ShellPart shell; OverrideShellPart override; } OverrideShellRec, *OverrideShellWidget; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { CorePart core; CompositePart composite; ShellPart shell; WMShellPart wm; } WMShellRec, *WMShellWidget; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { CorePart core; CompositePart composite; ShellPart shell; WMShellPart wm; VendorShellPart vendor; } VendorShellRec, *VendorShellWidget; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { CorePart core; CompositePart composite; ShellPart shell; WMShellPart wm; VendorShellPart vendor; TransientShellPart transient; } TransientShellRec, *TransientShellWidget; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { CorePart core; CompositePart composite; ShellPart shell; WMShellPart wm; VendorShellPart vendor; TopLevelShellPart topLevel; } TopLevelShellRec, *TopLevelShellWidget; .De .KE .KS .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i .IN "ApplicationShellWidget" "" "@DEF@" typedef struct { CorePart core; CompositePart composite; ShellPart shell; WMShellPart wm; VendorShellPart vendor; TopLevelShellPart topLevel; ApplicationShellPart application; } ApplicationShellRec, *ApplicationShellWidget; .De .KE .KS .IN "SessionShellWidget" "" "@DEF@" .Ds 0 .TA .5i 2.5i 4.5i .ta .5i 2.5i 4.5i typedef struct { CorePart core; CompositePart composite; ShellPart shell; WMShellPart wm; VendorShellPart vendor; TopLevelShellPart topLevel; ApplicationShellPart application; SessionShellPart session; } SessionShellRec, *SessionShellWidget; .De .LP .eM .KE .NH 3 Shell Resources .XS \fB\*(SN Shell Resources\fP .XE .LP .IN "ShellWidget" "Resources" The resource names, classes, and representation types specified in the .PN shellClassRec resource list are: .LP .TS lw(1.7i) lw(1.7i) lw(1.2i) . _ .sp 6p Name Class Representation .sp 6p _ .sp 6p XtNallowShellResize XtCAllowShellResize XtRBoolean XtNcreatePopupChildProc XtCCreatePopupChildProc XtRFunction XtNgeometry XtCGeometry XtRString XtNoverrideRedirect XtCOverrideRedirect XtRBoolean XtNpopdownCallback XtCCallback XtRCallback XtNpopupCallback XtCCallback XtRCallback XtNsaveUnder XtCSaveUnder XtRBoolean XtNvisual XtCVisual XtRVisual .sp 6p _ .TE .LP OverrideShell declares no additional resources beyond those defined by Shell. .LP The resource names, classes, and representation types specified in the .PN wmShellClassRec .IN "WMShell" "resources" resource list are: .LP .TS lw(2.1i) lw(2.1i) lw(1.2i) . _ .sp 6p Name Class Representation .sp 6p _ .sp 6p XtNbaseHeight XtCBaseHeight XtRInt XtNbaseWidth XtCBaseWidth XtRInt XtNclientLeader XtCClientLeader XtRWidget XtNheightInc XtCHeightInc XtRInt XtNiconMask XtCIconMask XtRBitmap XtNiconPixmap XtCIconPixmap XtRBitmap XtNiconWindow XtCIconWindow XtRWindow XtNiconX XtCIconX XtRInt XtNiconY XtCIconY XtRInt XtNinitialState XtCInitialState XtRInitialState XtNinput XtCInput XtRBool XtNmaxAspectX XtCMaxAspectX XtRInt XtNmaxAspectY XtCMaxAspectY XtRInt XtNmaxHeight XtCMaxHeight XtRInt XtNmaxWidth XtCMaxWidth XtRInt XtNminAspectX XtCMinAspectX XtRInt XtNminAspectY XtCMinAspectY XtRInt XtNminHeight XtCMinHeight XtRInt XtNminWidth XtCMinWidth XtRInt XtNtitle XtCTitle XtRString XtNtitleEncoding XtCTitleEncoding XtRAtom XtNtransient XtCTransient XtRBoolean XtNwaitforwm, XtNwaitForWm XtCWaitforwm, XtCWaitForWm XtRBoolean XtNwidthInc XtCWidthInc XtRInt XtNwindowRole XtCWindowRole XtRString XtNwinGravity XtCWinGravity XtRGravity XtNwindowGroup XtCWindowGroup XtRWindow XtNwmTimeout XtCWmTimeout XtRInt XtNurgency XtCUrgency XtRBoolean .sp 6p _ .TE .LP The class resource list for VendorShell is implementation-defined. .LP The resource names, classes, and representation types that are specified in the .PN transient\%ShellClassRec .IN "TransientShell" "resources" resource list are: .LP .TS lw(1.7i) lw(1.7i) lw(1.2i) . _ .sp 6p Name Class Representation .sp 6p _ .sp 6p XtNtransientFor XtCTransientFor XtRWidget .sp 6p _ .TE .LP The resource names, classes, and representation types that are specified in the .PN topLevelShellClassRec .IN "TopLevelShell" "resources" resource list are: .LP .TS lw(1.7i) lw(1.7i) lw(1.2i) . _ .sp 6p Name Class Representation .sp 6p _ .sp 6p XtNiconName XtCIconName XtRString XtNiconNameEncoding XtCIconNameEncoding XtRAtom XtNiconic XtCIconic XtRBoolean .sp 6p _ .TE .LP The resource names, classes, and representation types that are specified in the .PN application\%ShellClassRec resource list are: .LP .TS lw(1.7i) lw(1.7i) lw(1.2i) . _ .sp 6p Name Class Representation .sp 6p _ .sp 6p XtNargc XtCArgc XtRInt XtNargv XtCArgv XtRStringArray .sp 6p _ .TE .LP .KS The resource names, classes, and representation types that are specified in the .PN sessionShellClassRec resource list are: .LP .TS lw(1.7i) lw(1.7i) lw(1.2i) . _ .sp 6p Name Class Representation .sp 6p _ XtNcancelCallback XtCCallback XtRCallback XtNcloneCommand XtCCloneCommand XtRCommandArgArray XtNconnection XtCConnection XtRSmcConn XtNcurrentDirectory XtCCurrentDirectory XtRDirectoryString XtNdieCallback XtCCallback XtRCallback XtNdiscardCommand XtCDiscardCommand XtRCommandArgArray XtNenvironment XtCEnvironment XtREnvironmentArray XtNerrorCallback XtCCallback XtRCallback XtNinteractCallback XtCCallback XtRCallback XtNjoinSession XtCJoinSession XtRBoolean XtNprogramPath XtCProgramPath XtRString XtNresignCommand XtCResignCommand XtRCommandArgArray XtNrestartCommand XtCRestartCommand XtRCommandArgArray XtNrestartStyle XtCRestartStyle XtRRestartStyle XtNsaveCallback XtCCallback XtRCallback XtNsaveCompleteCallback XtCCallback XtRCallback XtNsessionID XtCSessionID XtRString XtNshutdownCommand XtCShutdownCommand XtRCommandArgArray .sp 6p _ .TE .KE .NH 3 ShellPart Default Values .XS \fB\*(SN ShellPart Default Values\fP .XE .LP The default values for fields common to all classes of public shells (filled in by the Shell resource lists and the Shell initialize procedures) are: .TS lw(1.75i) lw(3i). _ .sp 6p Field Default Value .sp 6p _ .sp 6p geometry NULL create_popup_child_proc NULL grab_kind (none) spring_loaded (none) popped_up T{ .PN False T} allow_shell_resize T{ .PN False T} client_specified (internal) save_under T{ .PN True for OverrideShell and TransientShell, .PN False otherwise T} override_redirect T{ .PN True for OverrideShell, .PN False otherwise T} popup_callback NULL popdown_callback NULL visual T{ .PN CopyFromParent T} .sp 6p _ .TE .LP The \fIgeometry\fP field specifies the size and position and is usually given only on a command line or in a defaults file. If the \fIgeometry\fP field is non-NULL when a widget of class WMShell is realized, the geometry specification is parsed using .PN XWMGeometry with a default geometry string constructed from the values of \fIx\fP, \fIy\fP, \fIwidth\fP, \fIheight\fP, \fIwidth_inc\fP, and \fIheight_inc\fP and the size and position flags in the window manager size hints are set. If the geometry specifies an x or y position, then .PN USPosition is set. If the geometry specifies a width or height, then .PN USSize is set. Any fields in the geometry specification override the corresponding values in the Core \fIx\fP, \fIy\fP, \fIwidth\fP, and \fIheight\fP fields. If \fIgeometry\fP is NULL or contains only a partial specification, then the Core \fIx\fP, \fIy\fP, \fIwidth\fP, and \fIheight\fP fields are used and .PN PPosition and .PN PSize are set as appropriate. The geometry string is not copied by any of the \*(xI Shell classes; a client specifying the string in an arglist or varargs list must ensure that the value remains valid until the shell widget is realized. For further information on the geometry string, see Section 16.4 in \fI\*(xL\fP. .LP The \fIcreate_popup_child_proc\fP procedure is called by the .PN XtPopup procedure and may remain NULL. The \fIgrab_kind\fP, \fIspring_loaded\fP, and \fIpopped_up\fP fields maintain widget state information as described under .PN XtPopup , .PN XtMenuPopup , .PN XtPopdown , and .PN XtMenuPopdown . .IN "allowShellResize" "" "@DEF@" The \fIallow_shell_resize\fP field controls whether the widget contained by the shell is allowed to try to resize itself. If allow_shell_resize is .PN False , any geometry requests made by the child will always return .PN XtGeometryNo without interacting with the window manager. Setting \fIsave_under\fP .PN True instructs the server to attempt to save the contents of windows obscured by the shell when it is mapped and to restore those contents automatically when the shell is unmapped. It is useful for pop-up menus. Setting \fIoverride_redirect\fP .PN True determines whether the window manager can intercede when the shell window is mapped. For further information on override_redirect, see Section 3.2 in \fI\*(xL\fP and Sections 4.1.10 and 4.2.2 in the \fI\*(xC\fP. The pop-up and pop-down callbacks are called during .PN XtPopup and .PN XtPopdown . The default value of the \fIvisual\fP resource is the symbolic value .PN CopyFromParent . The \*(xI do not need to query the parent's visual type when the default value is used; if a client using .PN XtGetValues to examine the visual type receives the value .PN CopyFromParent , it must then use .PN XGetWindowAttributes if it needs the actual visual type. .LP The default values for Shell fields in WMShell and its subclasses are: .LP .IN "XtUnspecifiedShellInt" "" "@DEF@" .IN "XtUnspecifiedWindow" .TS lw(1i) lw(4i). _ .sp 6p Field Default Value .sp 6p _ .sp 6p title T{ Icon name, if specified, otherwise the application's name T} wm_timeout Five seconds, in units of milliseconds wait_for_wm T{ .PN True T} transient T{ .PN True for TransientShell, .PN False otherwise T} urgency T{ .PN False T} client_leader NULL window_role NULL min_width \fBXtUnspecifiedShellInt\fP min_height \fBXtUnspecifiedShellInt\fP max_width \fBXtUnspecifiedShellInt\fP max_height \fBXtUnspecifiedShellInt\fP width_inc \fBXtUnspecifiedShellInt\fP height_inc \fBXtUnspecifiedShellInt\fP min_aspect_x \fBXtUnspecifiedShellInt\fP min_aspect_y \fBXtUnspecifiedShellInt\fP max_aspect_x \fBXtUnspecifiedShellInt\fP max_aspect_y \fBXtUnspecifiedShellInt\fP input T{ .PN False T} initial_state Normal icon_pixmap None icon_window None icon_x \fBXtUnspecifiedShellInt\fP icon_y \fBXtUnspecifiedShellInt\fP icon_mask None window_group \fBXtUnspecifiedWindow\fP base_width \fBXtUnspecifiedShellInt\fP base_height \fBXtUnspecifiedShellInt\fP win_gravity \fBXtUnspecifiedShellInt\fP title_encoding See text .sp 6p _ .TE .LP The \fItitle\fP and \fItitle_encoding\fP fields are stored in the .PN \s-1WM_NAME\s+1 property on the shell's window by the WMShell realize procedure. If the \fItitle_encoding\fP field is .PN None , the \fItitle\fP string is assumed to be in the encoding of the current locale and the encoding of the .PN \s-1WM_NAME\s+1 property is set to .PN XStdICCTextStyle . If a language procedure has not been set the default value of \fItitle_encoding\fP is \fB\s-1XA_STRING\s+1\fP, otherwise the default value is .PN None . The \fIwm_timeout\fP field specifies, in milliseconds, the amount of time a shell is to wait for confirmation of a geometry request to the window manager. If none comes back within that time, the shell assumes the window manager is not functioning properly and sets \fIwait_for_wm\fP to .PN False (later events may reset this value). When \fIwait_for_wm\fP is .PN False , the shell does not wait for a response, but relies on asynchronous notification. If \fItransient\fP is .PN True , the .PN \s-1WM_TRANSIENT_FOR\s+1 property will be stored on the shell window with a value as specified below. The interpretation of this property is specific to the window manager under which the application is run; see the \fI\*(xC\fP for more details. .LP The realize and set_values procedures of WMShell store the .PN \s-1WM_CLIENT_LEADER\s+1 property on the shell window. When \fIclient_leader\fP is not NULL and the client leader widget is realized, the property will be created with the value of the window of the client leader widget. When \fIclient_leader\fP is NULL and the shell widget has a NULL parent, the widget's window is used as the value of the property. When \fIclient_leader\fP is NULL and the shell widget has a non-NULL parent, a search is made for the closest shell ancestor with a non-NULL \fIclient_leader\fP, and if none is found the shell ancestor with a NULL parent is the result. If the resulting widget is realized, the property is created with the value of the widget's window. .LP When the value of \fIwindow_role\fP is not NULL, the realize and set_values procedures store the .PN \s-1WM_WINDOW_ROLE\s+1 property on the shell's window with the value of the resource. .LP All other resources specify fields in the window manager hints and the window manager size hints. The realize and set_values procedures of WMShell set the corresponding flag bits in the hints if any of the fields contain nondefault values. In addition, if a flag bit is set that refers to a field with the value .PN XtUnspecifiedShellInt , the value of the field is modified as follows: .br .sp .TS lw(2i) lw(3i). _ .sp 6p Field Replacement .sp 6p _ .sp 6p base_width, base_height 0 width_inc, height_inc 1 max_width, max_height 32767 min_width, min_height 1 min_aspect_x, min_aspect_y -1 max_aspect_x, max_aspect_y -1 icon_x, icon_y -1 win_gravity T{ Value returned by .PN XWMGeometry if called, else \fBNorthWestGravity\fP T} .sp 6p _ .TE .IN "XWMGeometry" .LP If the shell widget has a non-NULL parent, then the realize and set_values procedures replace the value .PN XtUnspecifiedWindow .IN "XtUnspecifiedWindow" "" "@DEF@" in the \fIwindow_group\fP field with the window id of the root widget of the widget tree if the root widget is realized. The symbolic constant .PN XtUnspecifiedWindowGroup .IN "XtUnspecifiedWindowGroup" "" "@DEF@" may be used to indicate that the \fIwindow_group\fP hint flag bit is not to be set. If \fItransient\fP is .PN True , the shell's class is not a subclass of TransientShell, and \fIwindow_group\fP is not .PN XtUnspecifiedWindowGroup , the WMShell realize and set_values procedures then store the .PN \s-1WM_TRANSIENT_FOR\s+1 property with the value of \fIwindow_group\fP. .LP .KS Transient shells have the following additional resource: .TS l l. _ .sp 6p Field Default Value .sp 6p _ .sp 6p transient_for NULL .sp 6p _ .TE .KE .LP The realize and set_values procedures of TransientShell store the .PN \s-1WM_TRANSIENT_FOR\s+1 property on the shell window if \fItransient\fP is .PN True . If \fItransient_for\fP is non-NULL and the widget specified by \fItransient_for\fP is realized, then its window is used as the value of the .PN \s-1WM_TRANSIENT_FOR\s+1 property; otherwise, the value of \fIwindow_group\fP is used. .LP .PN TopLevel shells have the the following additional resources: .TS l l. _ .sp 6p Field Default Value .sp 6p _ .sp 6p icon_name Shell widget's name iconic T{ .PN False T} icon_name_encoding See text .sp 6p _ .TE .LP The \fIicon_name\fP and \fIicon_name_encoding\fP fields are stored in the .PN \s-1WM_ICON_NAME\s+1 property on the shell's window by the TopLevelShell realize procedure. If the \fIicon_name_encoding\fP field is .PN None , the \fIicon_name\fP string is assumed to be in the encoding of the current locale and the encoding of the .PN \s-1WM_ICON_NAME\s+1 property is set to .PN XStdICCTextStyle . If a language procedure has not been set, the default value of \fIicon_name_encoding\fP is \fB\s-1XA_STRING\s+1\fP, otherwise the default value is .PN None . The \fIiconic\fP field may be used by a client to request that the window manager iconify or deiconify the shell; the TopLevelShell set_values procedure will send the appropriate .PN \s-1WM_CHANGE_STATE\s+1 message (as specified by the \fI\*(xC\fP) if this resource is changed from .PN False to .PN True and will call .PN XtPopup specifying \fIgrab_kind\fP as .PN XtGrabNone if \fIiconic\fP is changed from .PN True to .PN False . The XtNiconic resource is also an alternative way to set the XtNinitialState resource to indicate that a shell should be initially displayed as an icon; the TopLevelShell initialize procedure will set \fIinitial_state\fP to .PN IconicState if \fIiconic\fP is .PN True . .LP Application shells have the following additional resources: .br .ne 4 .TS l l. _ .sp 6p Field Default Value .sp 6p _ .sp 6p argc 0 argv NULL .sp 6p _ .TE .LP The \fIargc\fP and \fIargv\fP fields are used to initialize the standard property .PN \s-1WM_COMMAND\s+1 . See the \fI\*(xC\fP for more information. .LP The default values for the SessionShell instance fields, which are filled in from the resource lists and by the initialize procedure, are .TS l l. _ .sp 6p Field Default Value .sp 6p _ .sp 6p cancel_callbacks NULL clone_command See text connection NULL current_dir NULL die_callbacks NULL discard_command NULL environment NULL error_callbacks NULL interact_callbacks NULL join_session T{ .PN True T} program_path See text resign_command NULL restart_command See text restart_style T{ .PN SmRestartIfRunning T} save_callbacks NULL save_complete_callbacks NULL session_id NULL shutdown_command NULL .sp 6p _ .TE .LP The \fIconnection\fP field contains the session connection object or NULL if a session connection is not being managed by this widget. .LP The \fIsession_id\fP is an identification assigned to the session participant by the session manager. The \fIsession_id\fP will be passed to the session manager as the client identifier of the previous session. When a connection is established with the session manager, the client id assigned by the session manager is stored in the \fIsession_id\fP field. When not NULL, the \fIsession_id\fP of the Session shell widget that is at the root of the widget tree of the client leader widget will be used to create the .PN \s-1SM_CLIENT_ID\s+1 property on the client leader's window. .LP If \fIjoin_session\fP is .PN False , the widget will not attempt to establish a connection to the session manager at shell creation time. See Sections 4.2.1 and 4.2.4 for more information on the functionality of this resource. .LP The \fIrestart_command\fP, \fIclone_command\fP, \fIdiscard_command\fP, \fIresign_command\fP, \fIshutdown_command\fP, \fIenvironment\fP, \fIcurrent_dir\fP, \fIprogram_path\fP, and \fIrestart_style\fP fields contain standard session properties. .LP When a session connection is established or newly managed by the shell, the shell initialize and set_values methods check the values of the \fIrestart_command\fP, \fIclone_command\fP, and \fIprogram_path\fP resources. At that time, if \fIrestart_command\fP is NULL, the value of the \fIargv\fP resource will be copied to \fIrestart_command\fP. Whether or not \fIrestart_command\fP was NULL, if \*Q\fR-xtsessionID\fP\*U \*Q\fR<session id>\*U does not already appear in the \fIrestart_command\fP, it will be added by the initialize and set_values methods at the beginning of the command arguments; if the \*Q\fR-xtsessionID\fP\*U argument already appears with an incorrect \fRsession id\fP in the following argument, that argument will be replaced with the current \fRsession id\fP. .LP After this, the shell initialize and set_values procedures check the \fIclone_command\fP. If \fIclone_command\fP is NULL, \fIrestart_command\fP will be copied to \fIclone_command\fP, except the \*Q\fR-xtsessionID\fP\*U and following argument will not be copied. .LP Finally, the shell initialize and set_values procedures check the \fIprogram_path\fP. If \fIprogram_path\fP is NULL, the first element of \fIrestart_command\fP is copied to \fIprogram_path\fP. .LP The possible values of \fIrestart_style\fP are .PN SmRestartIfRunning , .PN SmRestartAnyway , .PN SmRestartImmediately , and .PN SmRestartNever . A resource converter is registered for this resource; for the strings that it recognizes, see Section 9.6.1. .LP The resource type EnvironmentArray is a NULL-terminated array of pointers to strings; each string has the format "name=value". The `=' character may not appear in the name, and the string is terminated by a null character. .NH 2 Session Participation .XS \fB\*(SN Session Participation\fP .XE .LP Applications can participate in a user's session, exchanging messages with the session manager as described in the \fIX Session Management Protocol\fP and the \fIX Session Management Library\fP. .LP When a widget of .PN sessionShellWidgetClass or a subclass is created, the widget provides support for the application as a session participant and continues to provide support until the widget is destroyed. .NH 3 Joining a Session .XS \fB\*(SN Joining a Session\fP .XE .LP When a Session shell is created, if \fIconnection\fP is NULL, and if \fIjoin_session\fP is .PN True , and if \fIargv\fP or \fIrestart_command\fP is not NULL, and if in POSIX environments the .PN \s-1SESSION_MANAGER\s+1 environment variable is defined, the shell will attempt to establish a new connection with the session manager. .LP To transfer management of an existing session connection from an application to the shell at widget creation time, pass the existing session connection ID as the \fIconnection\fP resource value when creating the Session shell, and if the other creation-time conditions on session participation are met, the widget will maintain the connection with the session manager. The application must ensure that only one Session shell manages the connection. .LP In the Session shell set_values procedure, if \fIjoin_session\fP changes from .PN False to .PN True and \fIconnection\fP is NULL and when in POSIX environments the .PN \s-1SESSION_MANAGER\s+1 environment variable is defined, the shell will attempt to open a connection to the session manager. If \fIconnection\fP changes from NULL to non-NULL, the Session shell will take over management of that session connection and will set \fIjoin_session\fP to .PN True . If \fIjoin_session\fP changes from .PN False to .PN True and \fIconnection\fP is not NULL, the Session shell will take over management of the session connection. .LP When a successful connection has been established, \fIconnection\fP contains the session connection ID for the session participant. When the shell begins to manage the connection, it will call .PN XtAppAddInput to register the handler which watches for protocol messages from the session manager. When the attempt to connect fails, a warning message is issued and \fIconnection\fP is set to NULL. .LP While the connection is being managed, if a .PN SaveYourself , .PN SaveYourselfPhase2 , .PN Interact , .PN ShutdownCancelled , .PN SaveComplete , or .PN Die message is received from the session manager, the Session shell will call out to application callback procedures registered on the respective callback list of the Session shell and will send .PN SaveYourselfPhase2Request , .PN InteractRequest , .PN InteractDone , .PN SaveYourselfDone , and .PN ConnectionClosed messages as appropriate. Initially, all of the client's session properties are undefined. When any of the session property resource values are defined or change, the Session shell initialize and set_values procedures will update the client's session property value by a .PN SetProperties or a .PN DeleteProperties message, as appropriate. The session ProcessID and UserID properties are always set by the shell when it is possible to determine the value of these properties. .NH 3 Saving Application State .XS \fB\*(SN Saving Application State\fP .XE .LP The session manager instigates an application checkpoint by sending a .PN SaveYourself request. Applications are responsible for saving their state in response to the request. .LP When the .PN SaveYourself request arrives, the procedures registered on the Session shell's save callback list are called. If the application does not register any save callback procedures on the save callback list, the shell will report to the session manager that the application failed to save its state. Each procedure on the save callback list receives a token in the \fIcall_data\fP parameter. .sp .LP .KS The checkpoint token in the \fIcall_data\fP parameter is of type .PN XtCheckpointToken . .LP .IN "XtCheckpointToken" "" "@DEF@" .IN "XtCheckpointTokenRec" "" "@DEF@" .sM .Ds 0 .TA .5i 2i 4i .ta .5i 2i 4i typedef struct { int save_type; int interact_style; Boolean shutdown; Boolean fast; Boolean cancel_shutdown int phase; int interact_dialog_type; /* return */ Boolean request_cancel; /* return */ Boolean request_next_phase; /* return */ Boolean save_success; /* return */ } XtCheckpointTokenRec, *XtCheckpointToken; .De .LP .eM .KE The \fIsave_type\fP, \fIinteract_style\fP, \fIshutdown\fP, and \fIfast\fP fields of the token contain the parameters of the .PN SaveYourself message. The possible values of \fIsave_type\fP are .PN SmSaveLocal , .PN SmSaveGlobal , and .PN SmSaveBoth ; these indicate the type of information to be saved. The possible values of \fIinteract_style\fP are .PN SmInteractStyleNone , .PN SmInteractStyleErrors , and .PN SmInteractStyleAny ; these indicate whether user interaction would be permitted and, if so, what kind of interaction. If \fIshutdown\fP is .PN True , the checkpoint is being performed in preparation for the end of the session. If \fIfast\fP is .PN True , the client should perform the checkpoint as quickly as possible. If \fIcancel_shutdown\fP is .PN True , a .PN ShutdownCancelled message has been received for the current save operation. (See Section 4.4.4.) The \fIphase\fP is used by manager clients, such as a window manager, to distinguish between the first and second phase of a save operation. The \fIphase\fP will be either 1 or 2. The remaining fields in the checkpoint token structure are provided for the application to communicate with the shell. .LP Upon entry to the first application save callback procedure, the return fields in the token have the following initial values: \fIinteract_dialog_type\fP is .PN SmDialogNormal ; \fIrequest_cancel\fP is .PN False ; \fIrequest_next_phase\fP is .PN False ; and \fIsave_success\fP is .PN True . When a token is returned with any of the four return fields containing a noninitial value, and when the field is applicable, subsequent tokens passed to the application during the current save operation will always contain the noninitial value. .LP The purpose of the token's \fIsave_success\fP field is to indicate the outcome of the entire operation to the session manager and ultimately, to the user. Returning .PN False indicates some portion of the application state could not be successfully saved. If any token is returned to the shell with \fIsave_success\fP .PN False , tokens subsequently received by the application for the current save operation will show \fIsave_success\fP as .PN False . When the shell sends the final status of the checkpoint to the session manager, it will indicate failure to save application state if any token was returned with \fIsave_success\fP .PN False . .LP Session participants that manage and save the state of other clients should structure their save or interact callbacks to set \fIrequest_next_phase\fP to .PN True when phase is 1, which will cause the shell to send the .PN SaveYourselfPhase2Request when the first phase is complete. When the .PN SaveYourselfPhase2 message is received, the shell will invoke the save callbacks a second time with \fIphase\fP equal to 2. Manager clients should save the state of other clients when the callbacks are invoked the second time and \fIphase\fP equal to 2. .LP The application may request additional tokens while a checkpoint is under way, and these additional tokens must be returned by an explicit call. .sp .LP .KS To request an additional token for a save callback response that has a deferred outcome, use .PN XtSessionGetToken . .LP .IN "XtSessionGetToken" "" "@DEF@" .sM .FD 0 XtCheckpointToken XtSessionGetToken(\fIwidget\fP) .br Widget \fIwidget\fP; .FN .IP \fIwidget\fP 1i Specifies the Session shell widget which manages session participation. .LP .eM The .PN XtSessionGetToken function will return NULL if no checkpoint operation is currently under way. .KE .sp .LP .KS To indicate the completion of checkpoint processing including user interaction, the application must signal the Session shell by returning all tokens. (See Sections 4.2.2.2 and 4.2.2.4). To return a token, use .PN XtSessionReturnToken . .LP .IN "XtSessionReturnToken" "" "@DEF@" .sM .FD 0 void XtSessionReturnToken(\fItoken\fP) .br XtCheckpointToken \fItoken\fP; .FN .IP \fItoken\fP 1i Specifies a token that was received as the \fIcall_data\fP by a procedure on the interact callback list or a token that was received by a call to .PN XtSessionGetToken . .LP .eM .KE .LP Tokens passed as \fIcall_data\fP to save callbacks are implicitly returned when the save callback procedure returns. A save callback procedure should not call .PN XtSessionReturnToken on the token passed in its \fIcall_data\fP. .NH 4 Requesting Interaction .XS \fB\*(SN Requesting Interaction\fP .XE .LP When the token \fIinteract_style\fP allows user interaction, the application may interact with the user during the checkpoint, but must wait for permission to interact. Applications request permission to interact with the user during the checkpointing operation by registering a procedure on the Session shell's interact callback list. When all save callback procedures have returned, and each time a token that was granted by a call to .PN XtSessionGetToken is returned, the Session shell examines the interact callback list. If interaction is permitted and the interact callback list is not empty, the shell will send an .PN InteractRequest to the session manager when an interact request is not already outstanding for the application. .LP The type of interaction dialog that will be requested is specified by the \fIinteract_dialog_type\fP field in the checkpoint token. The possible values for \fIinteract_dialog_type\fP are .PN SmDialogError and .PN SmDialogNormal . If a token is returned with \fIinteract_dialog_type\fP containing .PN SmDialogError , the interact request and any subsequent interact requests will be for an error dialog; otherwise, the request will be for a normal dialog with the user. .LP When a token is returned with \fIsave_success\fP .PN False or \fIinteract_dialog_type\fP .PN SmDialogError , tokens subsequently passed to callbacks during the same active .PN SaveYourself response will reflect these changed values, indicating that an error condition has occurred during the checkpoint. .LP The \fIrequest_cancel\fP field is a return value for interact callbacks only. Upon return from a procedure on the save callback list, the value of the token's \fIrequest_cancel\fP field is not examined by the shell. This is also true of tokens received through a call to .PN XtSessionGetToken . .NH 4 Interacting with the User during a Checkpoint .XS \fB\*(SN Interacting with the User during a Checkpoint\fP .XE .LP When the session manager grants the application's request for user interaction, the Session shell receives an .PN Interact message. The procedures registered on the interact callback list are executed, but not as if executing a typical callback list. These procedures are individually executed in sequence, with a checkpoint token functioning as the sequencing mechanism. Each step in the sequence begins by removing a procedure from the interact callback list and executing it with a token passed in the \fIcall_data\fP. The interact callback will typically pop up a dialog box and return. When the user interaction and associated application checkpointing has completed, the application must return the token by calling .PN XtSessionReturnToken . Returning the token completes the current step and triggers the next step in the sequence. .LP During interaction the client may request cancellation of a shutdown. When a token passed as \fIcall_data\fP to an interact procedure is returned, if \fIshutdown\fP is .PN True and \fIcancel_shutdown\fP is .PN False , \fIrequest_cancel\fP indicates whether the application requests that the pending shutdown be cancelled. If \fIrequest_cancel\fP is .PN True , the field will also be .PN True in any tokens subsequently granted during the checkpoint operation. When a token is returned requesting cancellation of the session shutdown, pending interact procedures will still be called by the Session shell. When all interact procedures have been removed from the interact callback list, executed, and the final interact token returned to the shell, an .PN InteractDone message is sent to the session manager, indicating whether a pending session shutdown is requested to be cancelled. .NH 4 Responding to a Shutdown Cancellation .XS \fB\*(SN Responding to a Shutdown Cancellation\fP .XE .LP Callbacks registered on the cancel callback list are invoked when the Session shell processes a .PN ShutdownCancelled message from the session manager. This may occur during the processing of save callbacks, while waiting for interact permission, during user interaction, or after the save operation is complete and the application is expecting a .PN SaveComplete or a .PN Die message. The \fIcall_data\fP for these callbacks is NULL. .LP When the shell notices that a pending shutdown has been cancelled, the token \fIcancel_shutdown\fP field will be .PN True in tokens subsequently given to the application. .LP Receiving notice of a shutdown cancellation does not cancel the pending execution of save callbacks or interact callbacks. After the cancel callbacks execute, if \fIinteract_style\fP is not .PN SmInteractStyleNone and the interact list is not empty, the procedures on the interact callback list will be executed and passed a token with \fIinteract_style\fP .PN SmInteractStyleNone . The application should not interact with the user, and the Session shell will not send an .PN InteractDone message. .NH 4 Completing a Save .XS \fB\*(SN Completing a Save\fP .XE .LP When there is no user interaction, the shell regards the application as having finished saving state when all callback procedures on the save callback list have returned, and any additional tokens passed out by .PN XtSessionGetToken have been returned by corresponding calls to .PN XtSessionReturnToken . If the save operation involved user interaction, the above completion conditions apply, and in addition, all requests for interaction have been granted or cancelled, and all tokens passed to interact callbacks have been returned through calls to .PN XtSessionReturnToken . If the save operation involved a manager client that requested the second phase, the above conditions apply to both the first and second phase of the save operation. .br .LP When the application has finished saving state, the Session shell will report the result to the session manager by sending the .PN SaveYourselfDone message. If the session is continuing, the shell will receive the .PN SaveComplete message when all applications have completed saving state. This message indicates that applications may again allow changes to their state. The shell will execute the save_complete callbacks. The \fIcall_data\fP for these callbacks is NULL. .NH 3 Responding to a Shutdown .XS \fB\*(SN Responding to a Shutdown\fP .XE .LP Callbacks registered on the die callback list are invoked when the session manager sends a .PN Die message. The callbacks on this list should do whatever is appropriate to quit the application. Before executing procedures on the die callback list, the Session shell will close the connection to the session manager and will remove the handler that watches for protocol messages. The \fIcall_data\fP for these callbacks is NULL. .NH 3 Resigning from a Session .XS \fB\*(SN Resigning from a Session\fP .XE .LP When the Session shell widget is destroyed, the destroy method will close the connection to the session manager by sending a .PN ConnectionClosed protocol message and will remove the input callback that was watching for session protocol messages. .LP When .PN XtSetValues is used to set \fIjoin_session\fP to .PN False , the set_values method of the Session shell will close the connection to the session manager if one exists by sending a .PN ConnectionClosed message, and \fIconnection\fP will be set to NULL. .LP Applications that exit in response to user actions and that do not wait for phase 2 destroy to complete on the Session shell should set \fIjoin_session\fP to .PN False before exiting. .LP When .PN XtSetValues is used to set \fIconnection\fP to NULL, the Session shell will stop managing the connection, if one exists. However, that session connection will not be closed. .LP Applications that wish to ensure continuation of a session connection beyond the destruction of the shell should first retrieve the \fIconnection\fP resource value, then set the \fIconnection\fP resource to NULL, and then they may safely destroy the widget without losing control of the session connection. .LP The error callback list will be called if an unrecoverable communications error occurs while the shell is managing the connection. The shell will close the connection, set \fIconnection\fP to NULL, remove the input callback, and call the procedures registered on the error callback list. The \fIcall_data\fP for these callbacks is NULL. .bp