/* crypto/md32_common.h */ /* ==================================================================== * Copyright (c) 1999-2007 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * licensing@OpenSSL.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * */ /* * This is a generic 32 bit "collector" for message digest algorithms. * Whenever needed it collects input character stream into chunks of * 32 bit values and invokes a block function that performs actual hash * calculations. * * Porting guide. * * Obligatory macros: * * DATA_ORDER_IS_BIG_ENDIAN or DATA_ORDER_IS_LITTLE_ENDIAN * this macro defines byte order of input stream. * HASH_CBLOCK * size of a unit chunk HASH_BLOCK operates on. * HASH_LONG * has to be at lest 32 bit wide, if it's wider, then * HASH_LONG_LOG2 *has to* be defined along * HASH_CTX * context structure that at least contains following * members: * typedef struct { * ... * HASH_LONG Nl,Nh; * either { * HASH_LONG data[HASH_LBLOCK]; * unsigned char data[HASH_CBLOCK]; * }; * unsigned int num; * ... * } HASH_CTX; * data[] vector is expected to be zeroed upon first call to * HASH_UPDATE. * HASH_UPDATE * name of "Update" function, implemented here. * HASH_TRANSFORM * name of "Transform" function, implemented here. * HASH_FINAL * name of "Final" function, implemented here. * HASH_BLOCK_DATA_ORDER * name of "block" function capable of treating *unaligned* input * message in original (data) byte order, implemented externally. * HASH_MAKE_STRING * macro convering context variables to an ASCII hash string. * * MD5 example: * * #define DATA_ORDER_IS_LITTLE_ENDIAN * * #define HASH_LONG MD5_LONG * #define HASH_LONG_LOG2 MD5_LONG_LOG2 * #define HASH_CTX MD5_CTX * #define HASH_CBLOCK MD5_CBLOCK * #define HASH_UPDATE MD5_Update * #define HASH_TRANSFORM MD5_Transform * #define HASH_FINAL MD5_Final * #define HASH_BLOCK_DATA_ORDER md5_block_data_order * * <appro@fy.chalmers.se> */ #if !defined(DATA_ORDER_IS_BIG_ENDIAN) && !defined(DATA_ORDER_IS_LITTLE_ENDIAN) #error "DATA_ORDER must be defined!" #endif #ifndef HASH_CBLOCK #error "HASH_CBLOCK must be defined!" #endif #ifndef HASH_LONG #error "HASH_LONG must be defined!" #endif #ifndef HASH_CTX #error "HASH_CTX must be defined!" #endif #ifndef HASH_UPDATE #error "HASH_UPDATE must be defined!" #endif #ifndef HASH_TRANSFORM #error "HASH_TRANSFORM must be defined!" #endif #ifndef HASH_FINAL #error "HASH_FINAL must be defined!" #endif #ifndef HASH_BLOCK_DATA_ORDER #error "HASH_BLOCK_DATA_ORDER must be defined!" #endif /* * Engage compiler specific rotate intrinsic function if available. */ #undef ROTATE #ifndef PEDANTIC # if defined(_MSC_VER) || defined(__ICC) # define ROTATE(a,n) _lrotl(a,n) # elif defined(__MWERKS__) # if defined(__POWERPC__) # define ROTATE(a,n) __rlwinm(a,n,0,31) # elif defined(__MC68K__) /* Motorola specific tweak. <appro@fy.chalmers.se> */ # define ROTATE(a,n) ( n<24 ? __rol(a,n) : __ror(a,32-n) ) # else # define ROTATE(a,n) __rol(a,n) # endif # elif defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) /* * Some GNU C inline assembler templates. Note that these are * rotates by *constant* number of bits! But that's exactly * what we need here... * <appro@fy.chalmers.se> */ # if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__) # define ROTATE(a,n) ({ register unsigned int ret; \ asm ( \ "roll %1,%0" \ : "=r"(ret) \ : "I"(n), "0"((unsigned int)(a)) \ : "cc"); \ ret; \ }) # elif defined(_ARCH_PPC) || defined(_ARCH_PPC64) || \ defined(__powerpc) || defined(__ppc__) || defined(__powerpc64__) # define ROTATE(a,n) ({ register unsigned int ret; \ asm ( \ "rlwinm %0,%1,%2,0,31" \ : "=r"(ret) \ : "r"(a), "I"(n)); \ ret; \ }) # elif defined(__s390x__) # define ROTATE(a,n) ({ register unsigned int ret; \ asm ("rll %0,%1,%2" \ : "=r"(ret) \ : "r"(a), "I"(n)); \ ret; \ }) # endif # endif #endif /* PEDANTIC */ #ifndef ROTATE #define ROTATE(a,n) (((a)<<(n))|(((a)&0xffffffff)>>(32-(n)))) #endif #if defined(DATA_ORDER_IS_BIG_ENDIAN) #ifndef PEDANTIC # if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) # if ((defined(__i386) || defined(__i386__)) && !defined(I386_ONLY)) || \ (defined(__x86_64) || defined(__x86_64__)) # if !defined(B_ENDIAN) /* * This gives ~30-40% performance improvement in SHA-256 compiled * with gcc [on P4]. Well, first macro to be frank. We can pull * this trick on x86* platforms only, because these CPUs can fetch * unaligned data without raising an exception. */ # define HOST_c2l(c,l) ({ unsigned int r=*((const unsigned int *)(c)); \ asm ("bswapl %0":"=r"(r):"0"(r)); \ (c)+=4; (l)=r; }) # define HOST_l2c(l,c) ({ unsigned int r=(l); \ asm ("bswapl %0":"=r"(r):"0"(r)); \ *((unsigned int *)(c))=r; (c)+=4; r; }) # endif # endif # endif #endif #if defined(__s390__) || defined(__s390x__) # define HOST_c2l(c,l) ((l)=*((const unsigned int *)(c)), (c)+=4, (l)) # define HOST_l2c(l,c) (*((unsigned int *)(c))=(l), (c)+=4, (l)) #endif #ifndef HOST_c2l #define HOST_c2l(c,l) (l =(((unsigned long)(*((c)++)))<<24), \ l|=(((unsigned long)(*((c)++)))<<16), \ l|=(((unsigned long)(*((c)++)))<< 8), \ l|=(((unsigned long)(*((c)++))) ), \ l) #endif #ifndef HOST_l2c #define HOST_l2c(l,c) (*((c)++)=(unsigned char)(((l)>>24)&0xff), \ *((c)++)=(unsigned char)(((l)>>16)&0xff), \ *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ *((c)++)=(unsigned char)(((l) )&0xff), \ l) #endif #elif defined(DATA_ORDER_IS_LITTLE_ENDIAN) #ifndef PEDANTIC # if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) # if defined(__s390x__) # define HOST_c2l(c,l) ({ asm ("lrv %0,%1" \ :"=d"(l) :"m"(*(const unsigned int *)(c)));\ (c)+=4; (l); }) # define HOST_l2c(l,c) ({ asm ("strv %1,%0" \ :"=m"(*(unsigned int *)(c)) :"d"(l));\ (c)+=4; (l); }) # endif # endif #endif #if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__) # ifndef B_ENDIAN /* See comment in DATA_ORDER_IS_BIG_ENDIAN section. */ # define HOST_c2l(c,l) ((l)=*((const unsigned int *)(c)), (c)+=4, l) # define HOST_l2c(l,c) (*((unsigned int *)(c))=(l), (c)+=4, l) # endif #endif #ifndef HOST_c2l #define HOST_c2l(c,l) (l =(((unsigned long)(*((c)++))) ), \ l|=(((unsigned long)(*((c)++)))<< 8), \ l|=(((unsigned long)(*((c)++)))<<16), \ l|=(((unsigned long)(*((c)++)))<<24), \ l) #endif #ifndef HOST_l2c #define HOST_l2c(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \ *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ *((c)++)=(unsigned char)(((l)>>16)&0xff), \ *((c)++)=(unsigned char)(((l)>>24)&0xff), \ l) #endif #endif /* * Time for some action:-) */ int HASH_UPDATE (HASH_CTX *c, const void *data_, size_t len) { const unsigned char *data=data_; unsigned char *p; HASH_LONG l; size_t n; if (len==0) return 1; l=(c->Nl+(((HASH_LONG)len)<<3))&0xffffffffUL; /* 95-05-24 eay Fixed a bug with the overflow handling, thanks to * Wei Dai <weidai@eskimo.com> for pointing it out. */ if (l < c->Nl) /* overflow */ c->Nh++; c->Nh+=(HASH_LONG)(len>>29); /* might cause compiler warning on 16-bit */ c->Nl=l; n = c->num; if (n != 0) { p=(unsigned char *)c->data; if (len >= HASH_CBLOCK || len+n >= HASH_CBLOCK) { memcpy (p+n,data,HASH_CBLOCK-n); HASH_BLOCK_DATA_ORDER (c,p,1); n = HASH_CBLOCK-n; data += n; len -= n; c->num = 0; memset (p,0,HASH_CBLOCK); /* keep it zeroed */ } else { memcpy (p+n,data,len); c->num += (unsigned int)len; return 1; } } n = len/HASH_CBLOCK; if (n > 0) { HASH_BLOCK_DATA_ORDER (c,data,n); n *= HASH_CBLOCK; data += n; len -= n; } if (len != 0) { p = (unsigned char *)c->data; c->num = (unsigned int)len; memcpy (p,data,len); } return 1; } void HASH_TRANSFORM (HASH_CTX *c, const unsigned char *data) { HASH_BLOCK_DATA_ORDER (c,data,1); } int HASH_FINAL (unsigned char *md, HASH_CTX *c) { unsigned char *p = (unsigned char *)c->data; size_t n = c->num; p[n] = 0x80; /* there is always room for one */ n++; if (n > (HASH_CBLOCK-8)) { memset (p+n,0,HASH_CBLOCK-n); n=0; HASH_BLOCK_DATA_ORDER (c,p,1); } memset (p+n,0,HASH_CBLOCK-8-n); p += HASH_CBLOCK-8; #if defined(DATA_ORDER_IS_BIG_ENDIAN) (void)HOST_l2c(c->Nh,p); (void)HOST_l2c(c->Nl,p); #elif defined(DATA_ORDER_IS_LITTLE_ENDIAN) (void)HOST_l2c(c->Nl,p); (void)HOST_l2c(c->Nh,p); #endif p -= HASH_CBLOCK; HASH_BLOCK_DATA_ORDER (c,p,1); c->num=0; memset (p,0,HASH_CBLOCK); #ifndef HASH_MAKE_STRING #error "HASH_MAKE_STRING must be defined!" #else HASH_MAKE_STRING(c,md); #endif return 1; } #ifndef MD32_REG_T #if defined(__alpha) || defined(__sparcv9) || defined(__mips) #define MD32_REG_T long /* * This comment was originaly written for MD5, which is why it * discusses A-D. But it basically applies to all 32-bit digests, * which is why it was moved to common header file. * * In case you wonder why A-D are declared as long and not * as MD5_LONG. Doing so results in slight performance * boost on LP64 architectures. The catch is we don't * really care if 32 MSBs of a 64-bit register get polluted * with eventual overflows as we *save* only 32 LSBs in * *either* case. Now declaring 'em long excuses the compiler * from keeping 32 MSBs zeroed resulting in 13% performance * improvement under SPARC Solaris7/64 and 5% under AlphaLinux. * Well, to be honest it should say that this *prevents* * performance degradation. * <appro@fy.chalmers.se> */ #else /* * Above is not absolute and there are LP64 compilers that * generate better code if MD32_REG_T is defined int. The above * pre-processor condition reflects the circumstances under which * the conclusion was made and is subject to further extension. * <appro@fy.chalmers.se> */ #define MD32_REG_T int #endif #endif