Imported nx-X11-3.1.0-1.tar.gznx-X11/3.1.0-1

Summary: Imported nx-X11-3.1.0-1.tar.gz
Keywords:

Imported nx-X11-3.1.0-1.tar.gz
into Git repository

1 files changed, 118 insertions, 0 deletions

diff --git a/nx-X11/programs/Xserver/hw/sun/README b/nx-X11/programs/Xserver/hw/sun/README
new file mode 100644
index 000000000..87ba53584
--- /dev/null
+++ b/nx-X11/programs/Xserver/hw/sun/README
@@ -0,0 +1,118 @@
+A joint production of:
+
+	Adam de Boor		University of California,  Berkeley
+
+	David Rosenthal
+	Stuart Marks
+	Robin Schaufler
+	Mike Schwartz
+	Frances Ho
+	Geoff Lee
+	Mark Opperman		Sun Microsystems
+
+	Bob Scheifler		MIT Laboratory for Computer Science
+	Keith Packard
+
+This version of the Sun X11 drivers uses ../mi,  ../mfb and ../cfb to support
+the following configurations:
+
+	Sun/2		bw2	cg2/3/5
+	Sun/3		bw2	cg2/3/4/5
+	Sun/4		bw2	cg2/4
+	SPARCstation		cg3/6
+	Sun/386i	mono	color
+
+The following configurations are NOT supported:
+
+	Sun/1		bw1	cg1	(requires separate port)
+	Sun/2			gp	(use /dev/cgtwo0)
+	Sun/3			gp	(use /dev/cgtwo0)
+	Sun/4			gp	(use /dev/cgtwo0)
+
+The mfb and cfb code has been substantially tuned for 1- and 8-bit framebuffers
+(with code for both fast and slow cpu-to-memory ratios).  It installs and runs
+on these configurations under SunOS 3.2, 3.4, and 4.0.  However, we must stress
+that it is completely unsupported, and if you have problems installing or using
+it you are on your own.
+
+
+Things to check before building:
+
+1)	config/sun.cf - set the SunOSMajorVersion and SunOSMinorVersion 
+	parameters to the right values.
+
+2)	config/Project.tmpl - check LIBDIR, FONTDIR, etc.; set 
+	define LibDir, FontDir, etc. in site.def as required.
+
+
+
+Then build the system by:
+
+1)	Go for it.  In the top-level directory, type
+
+	make World
+
+	This takes about forty minutes on a 4/260, and somewhat longer
+	on other Suns.
+
+
+2)	Go for it.  In the top-level directory, type
+
+	make install
+
+	Otherwise, you'll want to create a bunch of symbolic links to
+	the various executables and data files scattered throughout
+	the hierarchy.
+
+
+
+3)	On the console, or from an rlogin connection, put whatever you
+	chose for BINDIR (in Imake.tmpl) in your search path, and then
+	start the server:
+
+	    xinit
+	or
+	    xinit -- -dev /dev/??? [see below]
+
+	If it's from the console,  you probably want to redirect the
+	output thus:
+
+	    xinit >& /tmp/x11.out
+
+4)	xinit should start up an xterm window that acts as a console.  When
+	this xterm terminates, the xinit will kill the server.  You can also
+	start up client programs from a terminal or rlogin, but you must
+	first set the DISPLAY environment variable:
+
+	    setenv DISPLAY unix:0
+	    xterm &
+
+
+5)	Make sure that you have special devices in /dev for the appropriate 
+	framebuffer.  See the manual page for Xsun for details or run the
+	constype program. VME systems require special .o files when more
+        than one of a particular frame buffer type is installed.
+
+
+6)	In general,  Xsun auto-configures to use all the available framebuffers
+	(see the Xsun manual page).  In some circumstances, you may need to 
+	use the -dev switch on the command line to specify a specific device
+	to use.  In particular, on the GP, GP+, and GP2, you'll need to
+	specify -dev /dev/cgtwo0 your xdm Xservers file or your xinit script.
+
+
+7)	To shut the server down,  send it a Hangup or Terminate signal.
+
+
+8)	If X crashes, it will leave the keyboard in a funny state.  There is a
+	program called "kbd_mode" that will reset the mode of the keyboard.
+	"kbd_mode -a" is the appropriate setting for the bare console, and
+	"kbd_mode -e" is the appropriate setting for running with SunWindows.
+	You may have to issue this command from a terminal or from an rlogin
+	connection.  If you run from the bare console, you can give the
+	command
+
+	xinit ; kbd_mode -a
+
+	so that the keyboard mode will ALWAYS be set properly when the server
+	terminates.