Merge remote-tracking branch 'origin/released'

Conflicts:
	mesalib/src/glsl/link_functions.cpp
	mesalib/src/glsl/linker.cpp
	mesalib/src/glsl/main.cpp
	mesalib/src/mesa/program/ir_to_mesa.cpp
	xorg-server/composite/compalloc.c
	xorg-server/configure.ac
	xorg-server/hw/xquartz/X11Application.m
	xorg-server/hw/xquartz/bundle/Makefile.am
	xorg-server/hw/xquartz/xpr/xprFrame.c
	xorg-server/include/windowstr.h

1 files changed, 2634 insertions, 2618 deletions

diff --git a/X11/extensions/randrproto.txt b/X11/extensions/randrproto.txt
index 746342046..f0181416d 100644
--- a/X11/extensions/randrproto.txt
+++ b/X11/extensions/randrproto.txt
@@ -1,2618 +1,2634 @@
-	       The X Resize, Rotate and Reflect Extension

-			     Version 1.4.0

-			       2009-10-5

-

-			      Jim Gettys

-			   Jim.Gettys@hp.com

-		     Cambridge Research Laboratory

-				HP Labs

-			Hewlett Packard Company

-

-			     Keith Packard

-			keith.packard@intel.com

-		     Open Source Technology Center

-			   Intel Corporation

-

-1. Introduction

-

-The X Resize, Rotate and Reflect Extension, called RandR for short,

-brings the ability to resize, rotate and reflect the root window of a

-screen. It is based on the X Resize and Rotate Extension as specified

-in the Proceedings of the 2001 Usenix Technical Conference [RANDR].

-

-RandR as implemented and integrated into the X server differs in

-one substantial fashion from the design discussed in that paper: that

-is, RandR 1.0 does not implement the depth switching described in that

-document, and the support described for that in the protocol in that

-document and in the implementation has been removed from the

-protocol described here, as it has been overtaken by events.

-

-These events include:

-      ► Modern toolkits (in this case, GTK+ 2.x) have progressed to the point

-	of implementing migration between screens of arbitrary depths

-      ► The continued advance of Moore's law has made limited amounts of VRAM

-	less of an issue, reducing the pressure to implement depth switching

-	on laptops or desktop systems

-      ► The continued decline of legacy toolkits whose design would have

-	required depth switching to support migration

-      ► The lack of depth switching implementation experience in the

-	intervening time, due to events beyond our control

-

-Additionally, the requirement to support depth switching might

-complicate other re-engineering of the device independent part of the

-X server that is currently being contemplated.

-

-Rather than further delaying RandR's widespread deployment for a feature

-long wanted by the community (resizing of screens, particularly on laptops),

-or the deployment of a protocol design that might be flawed due to lack of

-implementation experience, we decided to remove depth switching from the

-protocol. It may be implemented at a later time if resources and

-interests permit as a revision to the protocol described here, which will

-remain a stable base for applications. The protocol described here has been

-implemented in the main X.org server, and more fully in the hw/kdrive

-implementation in the distribution, which fully implements resizing,

-rotation and reflection.

-

-1.2 Introduction to version 1.2 of the extension

-

-One of the significant limitations found in version 1.1 of the RandR

-protocol was the inability to deal with the Xinerama model where multiple

-monitors display portions of a common underlying screen. In this environment,

-zero or more video outputs are associated with each CRT controller which

-defines both a set of video timings and a 'viewport' within the larger

-screen. This viewport is independent of the overall size of the screen, and

-may be located anywhere within the screen.

-

-The effect is to decouple the reported size of the screen from the size

-presented by each video output, and to permit multiple outputs to present

-information for a single screen.

-

-To extend RandR for this model, we separate out the output, CRTC and screen

-configuration information and permit them to be configured separately. For

-compatibility with the 1.1 version of the protocol, we make the 1.1 requests

-simultaneously affect both the screen and the (presumably sole) CRTC and

-output. The set of available outputs are presented with UTF-8 encoded names

-and may be connected to CRTCs as permitted by the underlying hardware. CRTC

-configuration is now done with full mode information instead of just size

-and refresh rate, and these modes have names. These names also use UTF-8

-encoding. New modes may also be added by the user.

-

-Additional requests and events are provided for this new functionality.

-

-       ┌────────────────────────────────┬──────────┐

-    ┏━━━━━━━┳───────────────┐       ╔════════╗ ╔════════╗

-    ┃   1   ┃               │       ║   A    ║ ║   B    ║

-    ┃   ┏━━━╋━━━━━━━━━━━━━━━┫       ║        ║ ║        ║

-    ┣━━━╋━━━┛               ┃       ╚════════╝ ╚════════╝

-    │   ┃         2         ┃─────────────────┐

-    │   ┃                   ┃        ╔═══════════════════╗

-    │   ┃                   ┃        ║                   ║

-    │   ┗━━━━━━━━━━━━━━━━━━━┫        ║        C          ║

-    └───────────────────────┘        ║                   ║

-    ┌──────┐  ┏━━━━┓  ╔══════╗       ║                   ║

-    │screen│  ┃CRTC┃  ║output║       ╚═══════════════════╝

-    └──────┘  ┗━━━━┛  ╚══════╝

-

-In this picture, the screen is covered (incompletely) by two CRTCs. CRTC1

-is connected to two outputs, A and B. CRTC2 is connected to output C.

-Outputs A and B will present exactly the same region of the screen using

-the same mode line. Output C will present a different (larger) region of

-the screen using a different mode line.

-

-RandR provides information about each available CRTC and output; the

-connection between CRTC and output is under application control, although

-the hardware will probably impose restrictions on the possible

-configurations. The protocol doesn't try to describe these restrictions,

-instead it provides a mechanism to find out what combinations are supported.

-

-1.3 Introduction to version 1.3 of the extension

-

-Version 1.3 builds on the changes made with version 1.2 and adds some new

-capabilities without fundmentally changing the extension again. The

-following features are added in this version:

-

-   • Projective Transforms. The implementation work for general rotation

-     support made it trivial to add full projective transformations. These

-     can be used to scale the screen up/down as well as perform projector

-     keystone correct or other effects.

-

-   • Panning. It was removed with RandR 1.2 because the old semantics didn't

-     fit any longer. With RandR 1.3 panning can be specified per crtc.

-

-1.4 Introduction to version 1.4 of the extension

-

-Version 1.4 adds a couple more capabilities to further expose the

-underlying hardware to clients

-

-   • Per-crtc pixmaps. This provides for multiple scan-out buffers

-     which applications can create and assign to arbitrary collections

-     of crtcs.

-

-   • Sprite position and image transforms. These provide a projective

-     transform for both the hot spot location and the sprite image

-     itself for each CRTC.

-

-   • RRSetCrtcConfigs request. This supplies a set of

-     crtc configurations to the server that must be applied together

-     or not at all. This can reduce screen flicker while also

-     providing the server a complete configuration for appropriate

-     resource management.

-

-The first two additions, per-crtc pixmaps and sprite transforms are

-designed to solve two problems:

-

- 1) Screen transforms. The software transform code in the X server

-    uses a shadow frame buffer, adding another copy to every graphics

-    operation. Worse, the server has no idea about when clients are

-    done drawing a frame, so the user gets additional latency and

-    judder.

-

-    The goal is to move this operation out to the compositing manager

-    which already deals with an extra copy of the frame buffer for

-    many operations. Have the compositing manager create and draw to a

-    separate pixmap for scanout. It can perform whatever transforms

-    are required to get the image in the right orientation for the

-    user.

-

- 2) Hardware scanout engine size limits. With a single scanout buffer

-    for the entire screen, it's possible for the user to ask for a

-    configuration which requires that scanout buffer to be larger than

-    the hardware is capable of scanning out from. Again, having the

-    compositing manager create a pixmap for each CRTC will allow for

-    any configuration where monitor position within the virtual space

-    isn't limited by the scanout limits.

-

-In both of these cases, the Sprite transforms are necessary to ensure

-that the sprite appears at the desired spot on each CRTC and with the

-right shape.

-

-1.99 Acknowledgements

-

-Our thanks to the contributors to the design found on the xpert mailing

-list, in particular:

-

-Alan Hourihane for work on the early implementation

-Andrew C. Aitchison for help with the XFree86 DDX implementation

-Andy Ritger for early questions about how mergefb/Xinerama work with RandR

-Carl Worth for editing the specification and Usenix paper

-David Dawes for XFree86 DDX integration work

-Thomas Winischhofer for the hardware-accelerated SiS rotation implementation

-Matthew Tippett and Kevin Martin for splitting outputs and CRTCs to more

-fully expose what video hardware can do

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-2. Screen change model

-

-Screens may change dynamically, either under control of this extension, or

-due to external events. Examples include: monitors being swapped, pressing a

-button to switch from internal display to an external monitor on a laptop,

-or, eventually, the hotplug of a display card entirely on busses such as

-Cardbus or Express Card which permit hot-swap (which will require other work

-in addition to this extension).

-

-Since the screen configuration is dynamic and asynchronous to the client and

-may change at any time RandR provides mechanisms to ensure that your clients

-view is up to date with the configuration possibilities of the moment and

-enforces applications that wish to control the configuration to prove that

-their information is up to date before honoring requests to change the

-screen configuration (by requiring a timestamp on the request).

-

-Interested applications are notified whenever the screen configuration

-changes, providing the current size of the screen and subpixel order (see

-the Render extension [RENDER]), to enable proper rendering of subpixel

-decimated client text to continue, along with a time stamp of the

-configuration change. A client must refresh its knowledge of the screen

-configuration before attempting to change the configuration after a

-notification, or the request will fail.

-

-To avoid multiplicative explosion between orientation, reflection and sizes,

-the sizes are only those sizes in the normal (0) rotation.

-

-Rotation and reflection and how they interact can be confusing. In Randr,

-the coordinate system is rotated in a counter-clockwise direction relative

-to the normal orientation. Reflection is along the window system coordinate

-system, not the physical screen X and Y axis, so that rotation and

-reflection do not interact. The other way to consider reflection is to is

-specified in the "normal" orientation, before rotation, if you find the

-other way confusing.

-

-We expect that most clients and toolkits will be oblivious to changes to the

-screen structure, as they generally use the values in the connections Display

-structure directly. By toolkits updating the values on the fly, we believe

-pop-up menus and other pop up windows will position themselves correctly in

-the face of screen configuration changes (the issue is ensuring that pop-ups

-are visible on the reconfigured screen).

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-3. Data Types

-

-The subpixel order is shared with the Render extension, and is documented

-there. The only datatype defined is the screen size, defined in the normal

-(0 degree) orientation.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-4. Errors

-

-Errors are sent using core X error reports.

-

-Output

-	A value for an OUTPUT argument does not name a defined OUTPUT.

-CRTC

-	A value for a CRTC argument does not name a defined CRTC.

-Mode

-	A value for a MODE argument does not name a defined MODE.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-5. Protocol Types

-

-RRCONFIGSTATUS { Success

-		 InvalidConfigTime

-		 InvalidTime

-		 Failed }

-

-	A value of type RRCONFIGSTATUS returned when manipulating the output

-	configuration or querying information from the server that has some

-	time-dependency.

-

-	InvalidConfigTime indicates that the supplied configuration

-	timestamp does not match the current X server configuration

-	timestamp. Usually this means that the output configuration has

-	changed since the timestamp was received by the application.

-

-	InvalidTime indicates that the supplied output reconfiguration time

-	is earlier than the most recent output reconfiguration request.

-	Generally this indicates that another application has reconfigured

-	the output using a later timestamp.

-

-	Failed is returned whenever the operation is unsuccessful for some

-	other reason. This generally indicates that the requested output

-	configuration is unsupported by the hardware. The goal is to make

-	these limitations expressed by the protocol, but when that isn't

-	possible it is correct to return this error value. If, as a

-	implentor, you find this error code required, please submit the

-	hardware constraints that exist so that a future version of the

-	extension can correctly capture the configuration constraints in

-	your system.

-

-ROTATION { Rotate_0

-	   Rotate_90

-	   Rotate_180

-	   Rotate_270

-	   Reflect_X

-	   Reflect_Y }

-

-	These values are used both to indicate a set of allowed rotations

-	and reflections as well as to indicate a specific rotation and

-	reflection combination.

-

-RRSELECTMASK { RRScreenChangeNotifyMask

-	       RRCrtcChangeNotifyMask (New in version 1.2)

-	       RROutputChangeNotifyMask (New in version 1.2)

-	       RROutputPropertyNotifyMask (New in version 1.2) }

-

-SIZEID { CARD16 }

-

-MODE { XID or None }

-

-CRTC { XID }

-

-OUTPUT { XID }

-

-CONNECTION { Connected, Disconnected, UnknownConnection }

-

-	This value provides an indication of whether an output is actually

-	connected to a monitor or other presentation device.

-

-SUBPIXELORDER { SubPixelUnknown		The subpixel order uses the Render

-		SubPixelHorizontalRGB	extensions definitions; they are here

-		SubPixelHorizontalBGR	only for convenience.

-		SubPixelVerticalRGB

-		SubPixelVerticalBGR

-		SubPixelNone }

-

-SCREENSIZE { widthInPixels, heightInPixels: CARD16

-	     widthInMillimeters, heightInMillimeters: CARD16 }

-

-MODEFLAG { HSyncPositive

-	   HSyncNegative

-	   VSyncPositive

-	   VSyncNegative

-	   Interlace

-	   DoubleScan

-	   CSync

-	   CSyncPositive

-	   CSyncNegative

-	   HSkewPresent

-	   BCast

-	   PixelMultiplex

-	   DoubleClock

-	   ClockDivideBy2 }

-

-MODEINFO { id: MODE

-	   name: STRING

-	   width, height: CARD16

-	   dotClock: CARD32

-	   hSyncStart, hSyncEnd, hTotal, hSkew: CARD16

-	   vSyncStart, vSyncEnd, vTotal: CARD16

-	   modeFlags: SETofMODEFLAG }

-

-REFRESH { rates: LISTofCARD16 }

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-5.4. Protocol Types added in version 1.4 of the extension

-

-SCANOUTPIXMAPINFO { format: PICTFORMAT

-		    maxWidth, maxHeight: CARD16

-		    rotations: SETofROTATION }

-

-	'format' is the format of the pixels within the scanout

-	pixmap. Only 'Direct' formats are supported, this will never

-	be an 'Indexed' format.

-

-	'maxWidth' and 'maxHeight' define the largest supported

-	scanout pixmap. There is no minimum size; scanout pixmaps down

-	to 1x1 may be created.

-

-	'rotations' lists the set of rotations which can be provided

-	without additional latency or memory usage within the

-	environment. This typically means that they are supported

-	directly by the hardware. It is expected that a compositing

-	manager will perform other transforms as a part of the

-	compositing process in conjunction with the sprite transforms

-	described in this extension.

-

-SCREENFLAG { SetScreenPixmapSize

-             SetScreenSize

-	     SetScreenSizeInMillimeters

-	     SetScreenCrtcs }

-

-CRTCFLAG { SetCrtcPosition

-	   SetCrtcMode

-	   SetCrtcRotation

-	   SetCrtcOutputs

-	   SetCrtcSpritePositionTransform

-	   SetCrtcSpriteImageTransform

-	   SetCrtcPixmap

-	   SetCrtcPixmapPosition }

-

-CRTCCONFIG { crtc: CRTC

-	     set: SETofCRTCFLAG

-	     x, y: INT16

-	     mode: MODE

-	     rotation: ROTATION

-	     sprite-position-transform: TRANSFORM

-	     sprite-image-transform: TRANSFORM

-	     outputs: LISTofOUTPUT

-	     pixmap: PIXMAP or None

-	     pixmap-x, pixmap-y: INT16 }

-

-	If 'set' includes SetCrtcSpritePositionTransform, then

-	sprite-position-transform is used as in the

-	RRSetCrtcSpriteTransform request position-transform parameter.

-

-	If 'set' includes SetCrtcSpriteImageTransform, then

-	sprite-image-transform is used as in the

-	RRSetCrtcSpriteTransform request image-transform parameter.

-

-	If 'set' includes SetCrtcPixmap, then 'pixmap' specifies the

-	origin of the pixel data to be presented on 'crtc'. If

-	'pixmap' is None, then data will be presented from the screen

-	pixmap.

-

-	If 'set' includes SetCrtcPixmapPosition, then 'pixmap-x' and

-	'pixmap-y' specify the origin of the scanout data within the

-	pixmap, the area from that location to pixmap-x +

-	width-of(mode), pixmap-y + height-of(mode) is what will be

-	seen on the connected outputs.

-

-	If 'set' includes SetCrtcPixmap, then 'pixmap' must specify a

-	scanout pixmap as created by RRCreateScanoutPixmap or

-	None. Otherwise a Match error results. Furthermore: 

-

-	 * 'pixmap' must be at least as large as the area to be

-	   scanned out, or a Match error results.

-

-	 * If 'pixmap' is destroyed while still being used as a

-	   scanout pixmap, then the associated CRTC will have its

-	   scanout pixmap set back to None, the CRTC origin set back

-	   to 0,0 (to make sure it fits) and the screen pixmap width

-	   and height increased to be at least as big as the current

-	   CRTC mode.

-

-	 * Future crtc changes that do not change the scanout pixmap

-	   will cause an existing scanout pixmap to be resized to be

-	   large enough to hold the new mode at the then-current

-	   pixmap-x/pixmap-y location.

-

-	If 'set' includes SetCrtcRotation then:

-

-	 * Any new or existing scanout pixmap must have had the

-	   specified 'rotation' included as a part of its creation

-	   parameters, or a Match error results.

-

-	 * If no scanout pixmap is in use, then the crtc must support

-	   'rotation' else a Value error results.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-6. Extension Initialization

-

-The name of this extension is "RANDR".

-

-┌───

-    RRQueryVersion

-	client-major-version:	CARD32

-	client-minor-version:	CARD32

-      ▶

-	major-version:		CARD32

-	minor-version:		CARD32

-└───

-

-	The client sends the highest supported version to the server

-	and the server sends the highest version it supports, but no

-	higher than the requested version. Major versions changes can

-	introduce incompatibilities in existing functionality, minor

-	version changes introduce only backward compatible changes.

-	It is the clients responsibility to ensure that the server

-	supports a version which is compatible with its expectations.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-7. Extension Requests

-

-┌───

-    RRSelectInput

-	window: WINDOW

-	enable: SETofRRSELECTMASK

-└───

-	Errors: Window, Value

-

-	If 'enable' is RRScreenChangeNotifyMask, RRScreenChangeNotify events

-	will be sent when the screen configuration changes, either from

-	this protocol extension, or due to detected external screen

-	configuration changes. RRScreenChangeNotify may also be sent when

-	this request executes if the screen configuration has changed since

-	the client connected, to avoid race conditions.

-

-	New for version 1.2:

-

-	If 'enable' contains RRCrtcChangeMask, RRCrtcChangeNotify events

-	will be sent when a the configuration for a CRTC associated with the

-	screen changes, either through this protocol extension or due to

-	detected external changes. RRCrtcChangeNotify may also be sent when

-	this request executes if the CRTC configuration has changed since

-	the client connected, to avoid race conditions.

-

-	If 'enable' contains RROutputChangeMask, RROutputChangeNotify events

-	will be sent when a the configuration for an output associated with

-	the screen changes, either through this protocol extension or due to

-	detected external changes. RROutputChangeNotify may also be sent

-	when this request executes if the output configuration has changed

-	since the client connected, to avoid race conditions.

-

-	If 'enable' contains RROutputPropertyNotifyMask,

-	RROutputPropertyNotify events will be sent when properties change on

-	this output.

-

-┌───

-    RRSetScreenConfig

-	window: WINDOW

-	timestamp: TIMESTAMP

-	config-timestamp: TIMESTAMP

-	size-id: SIZEID

-	rotation: ROTATION

-	rate: CARD16

-      ▶

-	status: RRCONFIGSTATUS

-	new-timestamp: TIMESTAMP

-	config-timestamp: TIMESTAMP

-	root: WINDOW

-	subpixelOrder: SUBPIXELORDER

-└───

-	Errors: Value, Match

-

-	If 'timestamp' is less than the time when the configuration was last

-	successfully set, the request is ignored and InvalidTime returned in

-	status.

-

-	If 'config-timestamp' is not equal to when the server's screen

-	configurations last changed, the request is ignored and

-	InvalidConfigTime returned in status. This could occur if the

-	screen changed since you last made a RRGetScreenInfo request,

-	perhaps by a different piece of display hardware being installed.

-	Rather than allowing an incorrect call to be executed based on stale

-	data, the server will ignore the request.

-

-	'rate' contains the desired refresh rate. If it is zero, the server

-	selects an appropriate rate.

-

-	This request may fail for other indeterminate reasons, in which case

-	'status' will be set to Failed and no configuration change will be

-	made.

-

-	This request sets the screen to the specified size, rate, rotation

-	and reflection.

-

-	When this request succeeds, 'status' contains Success and the

-	requested changes to configuration will have been made.

-

-	'new-time-stamp' contains the time at which this request was

-	executed.

-

-	'config-timestamp' contains the time when the possible screen

-	configurations were last changed.

-

-	'root' contains the root window for the screen indicated by the

-	window.

-

-	'subpixelOrder' contains the resulting subpixel order of the screen

-	to allow correct subpixel rendering.

-

-	Value errors are generated when 'rotation', 'rate' or 'size-id'

-	are invalid.

-

-┌───

-    RRGetScreenInfo

-	window: WINDOW

-      ▶

-	rotations: SETofROTATION

-	root: WINDOW

-	timestamp: TIMESTAMP

-	config-timestamp: TIMESTAMP

-	size-id: SIZEID

-	rotation: ROTATION

-	rate: CARD16

-	sizes: LISTofSCREENSIZE

-	refresh: LISTofREFRESH

-└───

-

-	Errors: Window

-

-	RRGetScreenInfo returns information about the current and available

-	configurations for the screen associated with 'window'.

-

-	'rotations' contains the set of rotations and reflections supported

-	by the screen.

-

-	'root' is the root window of the screen.

-

-	'config-timestamp' indicates when the screen configuration

-	information last changed: requests to set the screen will fail

-	unless the timestamp indicates that the information the client

-	is using is up to date, to ensure clients can be well behaved

-	in the face of race conditions.

-

-	'timestamp' indicates when the configuration was last set.

-

-	'size-id' indicates which size is active.

-

-	'rate' is the current refresh rate. This is zero when the refresh

-	rate is unknown or on devices for which refresh is not relevant.

-

-	'sizes' is the list of possible frame buffer sizes (at the normal

-	orientation. Each size indicates both the linear physical size of

-	the screen and the pixel size.

-

-	'refresh' is the list of refresh rates for each size. Each element

-	of 'sizes' has a corresponding element in 'refresh'. An empty list

-	indicates no known rates, or a device for which refresh is not

-	relevant.

-

-	The default size of the screen (the size that would become the

-	current size when the server resets) is the first size in the

-	list.

-

-7.1. Extension Requests added in version 1.2 of the extension

-

-As introduced above, version 1.2 of the extension splits the screen size

-from the crtc and output configuration, permitting the subset of the screen

-presented by multiple outputs to be configured. As a separate notion, the

-size of the screen itself may be arbitrarily configured within a defined

-range. As crtcs and outputs are added and removed from the system, the set

-returned by the extension will change so that applications can detect

-dynamic changes in the display environment.

-

-┌───

-    RRGetScreenSizeRange

-	window: WINDOW

-      ▶

-	CARD16	minWidth, minHeight

-	CARD16	maxWidth, maxHeight

-└───

-	Errors: Window

-

-	Returns the range of possible screen sizes. The screen may be set to

-	any size within this range.

-

-┌───

-    RRSetScreenSize

-	window: WINDOW

-	width: CARD16

-	height: CARD16

-	width-in-millimeters: CARD32

-	height-in-millimeters: CARD32

-└───

-	Errors: Window, Match, Value

-

-	Sets the screen to the specified size. 'width' and 'height' must be

-	within the range allowed by GetScreenSizeRanges, otherwise a Value

-	error results. All active monitors must be configured to display a

-	subset of the specified size, else a Match error results.

-

-	'width-in-millimeters' and 'height-in-millimeters' can be set to

-	reflect the physical size of the screen reported both through this

-	extension and the core protocol. They must be non-zero, or Value

-	error results.

-

-	If panning is enabled, the width and height of the panning and the

-	tracking areas are adapted to the new size and clamped afterwards.

-	Disabled panning axes remain disabled.

-	Panning borders are disabled if their requirements are no longer met

-	(see RRSetPanning).

-

-┌───

-    RRGetScreenResources

-	window: WINDOW

-      ▶

-	timestamp: TIMESTAMP

-	config-timestamp: TIMESTAMP

-	crtcs: LISTofCRTC

-	outputs: LISTofOUTPUT

-	modes: LISTofMODEINFO

-└───

-	Errors: Window

-

-	RRGetScreenResources returns the list of outputs and crtcs connected

-	to the screen associated with 'window'.

-

-	'timestamp' indicates when the configuration was last set.

-

-	'config-timestamp' indicates when the configuration information last

-	changed. Requests to configure the output will fail unless the

-	timestamp indicates that the information the client is using is up

-	to date, to ensure clients can be well behaved in the face of race

-	conditions.

-

-	'crtcs' contains the list of CRTCs associated with the screen.

-

-	'outputs' contains the list of outputs associated with the screen.

-

-	'modes' contains the list of modes associated with the screen

-

-	This request explicitly asks the server to ensure that the

-	configuration data is up-to-date wrt the hardware. If that requires

-	polling, this is when such polling would take place.  If the

-	current configuration is all that's required, use

-	RRGetScreenResourcesCurrent instead.

-

-┌───

-    RRGetOutputInfo

-	output: OUTPUT

-	config-timestamp: TIMESTAMP

-      ▶

-	status: RRCONFIGSTATUS

-	timestamp: TIMESTAMP

-	crtc: CRTC

-

-	name: STRING

-	connection: CONNECTION

-	subpixel-order: SUBPIXELORDER

-	widthInMillimeters, heightInMillimeters: CARD32

-	crtcs: LISTofCRTC

-	clones: LISTofOUTPUT

-	modes: LISTofMODE

-	num-preferred: CARD16

-└───

-	Errors: Output

-

-	RRGetOutputInfo returns information about the current and available

-	configurations 'output'.

-

-	If 'config-timestamp' does not match the current configuration

-	timestamp (as returned by RRGetScreenResources), 'status' is set to

-	InvalidConfigTime and the remaining reply data is empty. Otherwise,

-	'status' is set to Success.

-

-	'timestamp' indicates when the configuration was last set.

-

-	'crtc' is the current source CRTC for video data, or Disabled if the

-	output is not connected to any CRTC.

-

-	'name' is a UTF-8 encoded string designed to be presented to the

-	user to indicate which output this is. E.g. "S-Video" or "DVI".

-

-	'connection' indicates whether the hardware was able to detect a

-	device connected to this output. If the hardware cannot determine

-	whether something is connected, it will set this to

-	UnknownConnection.

-

-	'subpixel-order' contains the resulting subpixel order of the

-	connected device to allow correct subpixel rendering.

-

-	'widthInMillimeters' and 'heightInMillimeters' report the physical

-	size of the displayed area. If unknown, or not really fixed (e.g.,

-	for a projector), these	values are both zero.

-

-	'crtcs' is the list of CRTCs that this output may be connected to.

-	Attempting to connect this output to a different CRTC results in a

-	Match error.

-

-	'clones' is the list of outputs which may be simultaneously

-	connected to the same CRTC along with this output. Attempting to

-	connect this output with an output not in the 'clones' list

-	results in a Match error.

-

-	'modes' is the list of modes supported by this output. Attempting to

-	connect this output to a CRTC not using one of these modes results

-	in a Match error.

-

-	The first 'num-preferred' modes in 'modes' are preferred by the

-	monitor in some way; for fixed-pixel devices, this would generally

-	indicate which modes match the resolution of the output device.

-

-┌───

-    RRListOutputProperties

-	output:OUTPUT

-      ▶

-	atoms: LISTof ATOM

-└───

-	Errors: Output

-

-	This request returns the atoms of properties currently defined on

-	the output.

-

-┌───

-    RRQueryOutputProperty

-	output: OUTPUT

-	property: ATOM

-      ▶

-	pending: BOOL

-	range: BOOL

-	immutable: BOOL

-	valid-values: LISTofINT32

-└───

-	Errors: Name, Atom, Output

-

-	If the specified property does not exist for the specified output,

-	then a Name error is returned.

-

-	If 'pending' is TRUE, changes made to property values with

-	RRChangeOutputProperty will be saved in the pending property value

-	and be automatically copied to the current value on the next

-	RRSetCrtcConfig request involving the named output. If 'pending' is

-	FALSE, changes are copied immediately.

-

-	If 'range' is TRUE, then the valid-values list will contain

-	precisely two values indicating the minimum and maximum allowed

-	values. If 'range' is FALSE, then the valid-values list will contain

-	the list of possible values; attempts to set other values will

-	result in a Value error.

-

-	If 'immutable' is TRUE, then the property configuration cannot be

-	changed by clients. Immutable properties are interpreted by the X

-	server.

-

-┌───

-    RRConfigureOutputProperty

-	output: OUTPUT

-	property: ATOM

-	pending: BOOL

-	range: BOOL

-	valid-values: LISTofINT32

-└───

-	Errors: Access, Name, Atom, Output

-

-	If the specified property is 'immutable', an Access error is

-	returned.

-

-	Otherwise, the configuration of the specified property is changed to

-	the values provided in this request.

-

-	If the specified property does not exist for the specified output,

-	it is created with an empty value and None type.

-

-┌───

-    RRChangeOutputProperty

-	output: OUTPUT

-	property, type: ATOM

-	format: {8, 16, 32}

-	mode: { Replace, Prepend, Append }

-	data: LISTofINT8 or LISTofINT16 or LISTofINT32

-└───

-	Errors: Alloc, Atom, Match, Value, Output

-

-	This request alters the value of the property for the specified

-	output. If the property is marked as a 'pending' property, only the

-	pending value of the property is changed. Otherwise, changes are

-	reflected in both the pending and current values of the property.

-	The type is uninterpreted by the server.  The format specifies

-	whether the data should be viewed as a list of 8-bit, 16-bit, or

-	32-bit quantities so that the server can correctly byte-swap as

-	necessary.

-

-	If the mode is Replace, the previous property value is discarded.

-	If the mode is Prepend or Append, then the type and format must

-	match the existing property value (or a Match error results).  If

-	the property is undefined, it is treated as defined with the correct

-	type and format with zero-length data.

-

-	For Prepend, the data is tacked on to the beginning of the existing

-	data, and for Append, it is tacked on to the end of the existing data.

-

-	This request generates a OutputPropertyNotify

-

-	The lifetime of a property is not tied to the storing client.

-	Properties remain until explicitly deleted, until the output is

-	destroyed, or until server reset (see section 10).

-

-	The maximum size of a property is server-dependent and may vary

-	dynamically.

-

-┌───

-    RRDeleteOutputProperty

-	output: OUTPUT

-	property: ATOM

-└───

-	Errors: Atom, Output

-

-	This request deletes the property from the specified window if the

-	property exists and generates a OutputPropertyNotify event unless

-	the property does not exist.

-

-┌───

-    RRGetOutputProperty

-	output: OUTPUT

-	property: ATOM

-	type: ATOM or AnyPropertyType

-	long-offset, long-length: CARD32

-	delete: BOOL

-	pending: BOOL

-      ▶

-	type: ATOM or None

-	format: {0, 8, 16, 32}

-	bytes-after: CARD32

-	value: LISTofINT8 or LISTofINT16 or LISTofINT32

-└───

-	Errors: Atom, Value, Output

-

-	If the specified property does not exist for the specified output,

-	then the return type is None, the format and bytes-after are zero,

-	and the value is empty.  The delete argument is ignored in this

-	case.

-

-	If the specified property exists but its type does not match the

-	specified type, then the return type is the actual type of the

-	property, the format is the actual format of the property (never

-	zero), the bytes-after is the length of the property in bytes (even

-	if the format is 16 or 32), and the value is empty.  The delete

-	argument is ignored in this case.

-

-	If the specified property exists and either AnyPropertyType is

-	specified or the specified type matches the actual type of the

-	property, then the return type is the actual type of the property,

-	the format is the actual format of the property (never zero), and

-	the bytes-after and value are as follows, given:

-

-		N = actual length of the stored property in bytes

-				  (even if the format is 16 or 32)

-		I = 4 × offset

-		T = N - I

-		L = MINIMUM(T, 4 × long-length)

-		A = N - (I + L)

-

-	If 'pending' is true, and if the property holds a pending value,

-	then the value returned will be the pending value of the property

-	rather than the current value.  The returned value starts at byte

-	index I in the property (indexing from 0), and its length in bytes

-	is L.  However, it is a Value error if long-offset is given such

-	that L is negative.  The value of bytes-after is A, giving the

-	number of trailing unread bytes in the stored property.  If delete

-	is True and the bytes-after is zero, the property is also deleted

-	from the output, and a RROutputPropertyNotify event is generated.

-

-┌───

-    RRCreateMode

-	window: WINDOW

-	modeinfo: MODEINFO

-      ▶

-	mode: MODE

-└───

-	Errors: Window, Name, Value

-

-	'modeinfo' provides a new mode for outputs on the screen

-	associated with 'window'. If the name of 'modeinfo' names an

-	existing mode, a Name error is returned.  If some parameter of the

-	mode is not valid in some other way, a Value error is returned.

-

-	The returned 'mode' provides the id for the mode.

-

-┌───

-    RRDestroyMode

-	mode: MODE

-└───

-	Errors: Mode, Access

-

-	The user-defined 'mode' is destroyed. 'mode' must name a mode

-	defined with RRCreateMode, else an Match error is returned.  If

-	'mode' is in use by some CRTC or Output, then an Access error is

-	returned.

-

-┌───

-    RRAddOutputMode

-	output: OUTPUT

-	mode: MODE

-└───

-	Errors: Output, Mode, Match

-

-	'output' indicates which output is to be configured.

-

-	'mode' specifies which mode to add. If 'mode' is not valid for

-	'output', then a Match error is generated.

-

-	This request generates OutputChangeNotify events.

-

-┌───

-    RRDeleteOutputMode

-	output: OUTPUT

-	mode: MODE

-└───

-	Errors: Output, Mode

-

-	'output' indicates which output is to be configured.

-

-	'mode' specifies which mode to delete. 'mode' must have been added

-	with RRAddOutputMode, else an Access error is returned. 'mode' must

-	not be active, else a Match error is returned.

-

-	This request generates OutputChangeNotify events.

-

-┌───

-    RRGetCrtcInfo

-	crtc: CRTC

-	config-timestamp: TIMESTAMP

-      ▶

-	status: RRCONFIGSTATUS

-	timestamp: TIMESTAMP

-	x, y: INT16

-	width, height: CARD16

-	mode: MODE

-	rotation: ROTATION

-	outputs: LISTofOUTPUT

-

-	rotations: SETofROTATION

-	possible-outputs: LISTofOUTPUT

-└───

-

-	Errors: Window

-

-	RRGetCrtcModes returns information about the current and available

-	configurations for the specified crtc connected to the screen

-	associated with 'window'.

-

-	If 'config-timestamp' does not match the current configuration

-	timestamp (as returned by RRGetScreenResources), 'status' is set to

-	InvalidConfigTime and the remaining reply data is empty. Otherwise,

-	'status' is set to Success.

-

-	'timestamp' indicates when the configuration was last set.

-

-	'x' and 'y' indicate the position of this CRTC within the screen

-	region. They will be set to 0 when the CRTC is disabled.

-

-	'width' and 'height' indicate the size of the area within the screen

-	presented by this CRTC. This may be different than the size of the

-	mode due to rotation. They will be set to 0 when the CRTC

-	is disabled.

-

-	'mode' indicates which mode is active, or None indicating that the

-	CRTC has been disabled and is not displaying the screen contents.

-

-	'rotation' indicates the active rotation. It is set to Rotate_0

-	when the CRTC is disabled.

-

-	'outputs' is the list of outputs currently connected to this CRTC

-	and is empty when the CRTC is disabled.

-

-	'rotations' contains the set of rotations and reflections supported

-	by the CRTC.

-

-	'possible-outputs' lists all of the outputs which may be connected

-	to this CRTC.

-

-┌───

-    RRSetCrtcConfig

-	crtc: CRTC

-	timestamp: TIMESTAMP

-	config-timestamp: TIMESTAMP

-	x, y: INT16

-	mode: MODE

-	rotation: ROTATION

-	outputs: LISTofOUTPUT

-      ▶

-	status: RRCONFIGSTATUS

-	new-timestamp: TIMESTAMP

-└───

-	Errors: Value, Match

-

-	If 'timestamp' is less than the time when the configuration was last

-	successfully set, the request is ignored and InvalidTime returned in

-	status.

-

-	If 'config-timestamp' is not equal to when the monitor's

-	configuration last changed, the request is ignored and

-	InvalidConfigTime returned in status. This could occur if the

-	monitor changed since you last made a RRGetScreenInfo request,

-	perhaps by a different monitor being connected to the machine.

-	Rather than allowing an incorrect call to be executed based on stale

-	data, the server will ignore the request.

-

-	'x' and 'y' contain the desired location within the screen for this

-	monitor's content. 'x' and 'y' must be within the screen size, else

-	a Value error results.

-

-	'mode' is either the desired mode or None indicating the CRTC should

-	be disabled. If 'mode' is not one of these values, a Value

-	error results. 'mode' must be valid for all of the configured outputs,

-	else a Match error.

-

-	'rotation' contains the desired rotation along with which

-	reflections should be enabled. The rotation and reflection values

-	must be among those allowed for this monitor, else a Value error

-	results.

-

-	'outputs' contains the set of outputs that this CRTC should be

-	connected to. The set must be among the list of acceptable output

-	sets for this CRTC or a Match error results.

-

-	If 'mode' is None, then 'outputs' must be empty, else a Match error

-	results. Conversely, if 'mode' is not None, then 'outputs' must not be

-	empty, else a Match error results.

-

-	This request may fail for other indeterminate reasons, in which case

-	'status' will be set to Failed and no configuration change will be

-	made.

-

-	This request sets the CRTC to the specified position, mode, rotation

-	and reflection. The entire area of the CRTC must fit within the

-	screen size, else a Match error results. As an example, rotating the

-	screen so that a single CRTC fills the entire screen before and

-	after may necessitate disabling the CRTC, resizing the screen,

-	then re-enabling the CRTC at the new configuration to avoid an

-	invalid intermediate configuration.

-

-	If panning is enabled, the width and height of the panning and the

-	tracking areas are clamped to the new mode size.

-	Disabled panning axes remain disabled.

-	Panning borders are disabled if their requirements are no longer met

-	(see RRSetPanning).

-

-	When this request succeeds, 'status' contains Success and the

-	requested changes to configuration will have been made.

-

-	'new-time-stamp' contains the time at which this request was

-	executed.

-

-┌───

-    RRGetCrtcGammaSize

-	crtc: CRTC

-      ▶

-	size: CARD16

-└───

-	Errors: Crtc

-

-	This request returns the size of the gamma ramps used by 'crtc'.

-

-┌───

-    RRGetCrtcGamma

-	crtc: CRTC

-      ▶

-	red: LISTofCARD16

-	green: LISTofCARD16

-	blue: LISTofCARD16

-└───

-	Errors: Crtc

-

-	This request returns the currently set gamma ramps for 'crtc'.  All

-	three lists will be the size returned by the RRGetCrtcGammaSize

-	request.

-

-┌───

-    RRSetCrtcGamma

-	crtc: CRTC

-	red: LISTofCARD16

-	green: LISTofCARD16

-	blue: LISTofCARD16

-└───

-	Errors: Crtc, Match

-

-	This request sets the gamma ramps for 'crtc'. All three lists

-	must be the size returned by RRGetCrtcGammaSize else a Value error

-	results.

-

-7.2. Extension Requests added in version 1.3 of the extension

-

-┌───

-    RRGetScreenResourcesCurrent

-	window: WINDOW

-      ▶

-	timestamp: TIMESTAMP

-	config-timestamp: TIMESTAMP

-	crtcs: LISTofCRTC

-	outputs: LISTofOUTPUT

-	modes: LISTofMODEINFO

-└───

-	Errors: Window

-

-	RRGetScreenResourcesCurrent returns the list of outputs and crtcs

-	connected to the screen associated with 'window'.

-

-	'timestamp' indicates when the configuration was last set.

-

-	'config-timestamp' indicates when the configuration information last

-	changed. Requests to configure the output will fail unless the

-	timestamp indicates that the information the client is using is up

-	to date, to ensure clients can be well behaved in the face of race

-	conditions.

-

-	'crtcs' contains the list of CRTCs associated with the screen.

-

-	'outputs' contains the list of outputs associated with the screen.

-

-	'modes' contains the list of modes associated with the screen.

-

-	Unlike RRGetScreenResources, this merely returns the current

-	configuration, and does not poll for hardware changes.

-

-┌───

-    RRSetCrtcTransform

-	crtc: CRTC

-	transform: TRANSFORM

-	filter: STRING8

-	values: LISTofFIXED

-└───

-	Errors: Crtc, Match

-

-	This request provides a mechanism that is more general than the

-	existing rotation and reflection values for describing the

-	transformation from frame buffer image to crtc presentation.

-	'transform' is a full 2D projective transformation from screen

-	coordinate space to crtc coordinate space. This transformation is

-	applied before the rotation and reflection values to compute the

-	complete transform.

-

-	'filter' and 'values' specify a Render filter that may be used by the

-	server when transforming data from frame buffer to crtc.

-

-	This request sets the transform to be used at the next

-	RRSetCrtcConfig request execution; it does not cause any change to

-	occur in the current configuration.

-

-	When a non-identity transformation is in use, the rectangle returned

-	by RRGetCrtcInfo defines the bounding rectangle of the screen that is

-	projected to the crtc. It is this projected rectangle which must be

-	within the area of the screen when the mode is set.

-

-┌───

-    RRGetCrtcTransform

-	crtc: CRTC

-      ▶

-	pending-transform: TRANSFORM

-	pending-filter: STRING8

-	pending-values: LISTofFIXED

-	current-transform: TRANSFORM

-	current-filter: STRING8

-	current-values: LISTofFIXED

-└───

-

-	This request returns the pending and current transforms for the

-	specified CRTC. The pending transform will be the same as the current

-	transform if no new pending transform has been set since the last call

-	to RRSetCrtcConfig.

-

-┌───

-    RRGetPanning

-	crtc: CRTC

-      ▶

-	status: RRCONFIGSTATUS

-	timestamp: TIMESTAMP

-	left, top, width, height: CARD16

-	track_left, track_top, track_width, track_height: CARD16

-	border_left, border_top, border_right, border_bottom: INT16

-└───

-

-	Errors: Crtc

-

-	Version 1.3 adds panning support again. If multiple crtcs are active

-	the panning behavior can be defined per crtc individually.

-	RRGetPanning returns information about the currently set panning

-	configuration for the specified crtc.  If the CRTC does not support

-	panning, all fields (except timestamp) will be 0.

-

-	'timestamp' indicates when the configuration was last set.

-

-	All other entries are explained for RRSetPanning.

-

-┌───

-    RRSetPanning

-	crtc: CRTC

-	timestamp: TIMESTAMP

-	left, top, width, height: CARD16

-	track_left, track_top, track_width, track_height: CARD16

-	border_left, border_top, border_right, border_bottom: INT16

-      ▶

-	status: RRCONFIGSTATUS

-	new-timestamp: TIMESTAMP

-└───

-	Errors: Crtc, Match

-

-	This request sets the panning parameters.  As soon as panning is

-	enabled, the CRTC position can change with every pointer move.

-	RRCrtcChangeNotify events are sent to the clients requesting those.

-

-	If 'timestamp' is less than the time when the configuration was last

-	successfully set, the request is ignored and InvalidTime returned in

-	status.

-

-	┌──┳━━━━━━━━━━━━━━┳─────┬ ─ ─ ─ ─ ─ ┐

-	│  ┃     CRTC     ┃     │

-	│  ┃              ┃     │           │

-	│  ┃             X┃→    │

-	│  ┃              ┃     │           │  framebuffer

-	│  ┗━━━━━━━━━━━━━━┛     │

-	│                       │           │

-	│panning area           │

-	└───────────────────────┴ ─ ─ ─ ─ ─ ┘

-

-	'left', 'top', 'width', and 'height' contain the total panning area

-	for this CRTC.  'width' has to be larger than or equal to the CRTC's

-	width or 0, and 'left'+'width' must be within the screen size, else a

-	Match error results.  Equivalent restrictions for the height exist.

-	'width' or 'height' set to 0 indicate that panning should be disabled

-	on the according axis.  Setting 'width'/'height' to the CRTC's

-	width/height will disable panning on the X/Y axis as well, but

-	RRSetScreenSize will silently enable panning if the screen size is

-	increased. This does not happen if set to 0.

-

-	┌────────┳━━━━━━━━━━━━━━┳ ─ ─ ─ ─ ─ ┐

-	│        ┃     CRTC     ┃

-	│        ┃              ┃           │

-	│        ┃              ┃

-	│        ┃              ┃           │  tracking area

-	│        ┗━━━━━━━━━━━━━━┫     X

-	│               ↓       │     ↓     │

-	│panning area           │

-	└───────────────────────┴ ─ ─ ─ ─ ─ ┘

-

-	'track_left', 'track_top', 'track_width', and 'track_height' contain

-	the pointer area for which the panning region is updated.  For normal

-	use cases it should enclose the panning area minus borders, and is

-	typically set to either the panning area minus borders, or to the

-	total screen size. If set to the total screen size, the CRTC will pan

-	in the remaining axis even if the pointer is outside the panning area

-	on a different CRTC, as shown in the figure above. If the pointer is

-	outside the tracking area, the CRTC will not pan. Zero can be used as

-	an alias for the total screen size.

-

-	┌──┳━━━━━━━━━━━━━━┳────────────┐

-	│  ┃     CRTC     ┃            │

-	│  ┃              ┃            │

-	│  ┃              ┃→           │

-	│  ┃           X←→┃            │

-	│  ┃       border_right        │

-	│  ┗━━━━━━━━━━━━━━┛            │

-	│                              │

-	│panning area                  │

-	└──────────────────────────────┘

-

-	'border_left', 'border_top', 'border_right', and 'border_bottom'

-	define the distances from the CRTC borders that will activate panning

-	if the pointer hits them.  If the borders are 0, the screen will pan

-	when the pointer hits the CRTC borders (behavior of pre-RandR Xserver

-	panning).  If the borders are positive, the screen will pan when the

-	pointer gets close to the CRTC borders, if they are negative, the

-	screen will only pan when the pointer is already way past the CRTC

-	borders.  Negative values might confuse users and disable panning to

-	the very edges of the screen.  Thus they are discouraged.

-	border_left + border_right has to be lower or equal than the CRTC's

-	width, else a Match error results.  An equivalent restriction for the

-	height exists.

-

-	Screen size changes update the panning and the tracking areas to the

-	new size. Both screen size changes and mode changes clamp these areas

-	to the current CRTC size.  In these cases panning borders are disabled

-	if their requirements are no longer met.

-

-	When this request succeeds, 'status' contains Success and the

-	requested changes to configuration will have been made.

-

-	'new-time-stamp' contains the time at which this request was

-	executed.

-

-┌───

-    RRSetOutputPrimary

-	window: WINDOW

-	output: OUTPUT

-└───

-	Errors: Match, Output, Window

-

-	RRSetOutputPrimary marks 'output' as the primary output for the

-	screen with the same root window as 'window'. This output's CRTC

-	will be sorted to the front of the list in Xinerama and RANDR

-	geometry requests for the benefit of older applications. The

-	default primary output is None, and None is a legal value to pass

-	to RRSetOutputPrimary. This request is expected to be used by

-	desktop environments to mark the screen that should hold the primary

-	menu bar or panel.

-

-	As this changes the logical layout of the screen, ConfigureNotify

-	and RRScreenChangeNotify will be generated on the appropriate root

-	window when the primary output is changed by this call. This request

-	also generates RROutputChangeNotify events on the outputs that gained

-	and lost primary status.

-

-	If an output is disconnected asynchronously (eg. due to recabling),

-	the primary status does not change, but RROutputChangeNotify events

-	will be generated if the hardware is capable of detecting this;

-	clients are expected to reconfigure if appropriate.

-

-	If an output is deleted (eg. due to device hotplug), the server will

-	act as though None was passed to RRSetOutputPrimary, including

-	generating the appropriate events.

-

-┌───

-    RRGetOutputPrimary

-	window: WINDOW

-      ▶

-	output: OUTPUT

-└───

-	Errors: Window

-

-	RRGetOutputPrimary returns the primary output for the screen.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-7.3. Extension Requests added in version 1.4 of the extension.

-

-┌───

-    RRQueryScanoutPixmaps

-	window: WINDOW

-      ▶

-	infos: LISTofSCANOUTPIXMAPINFO

-└───

-	Errors: Window

-

-	This request returns information about the server support for

-	alternate scanout pixmaps. For each pictformat, there is a set

-	of rotations and a maximum supported size. The rotations here

-	are those provided by the scanout hardware itself, not by

-	software emulation.

-

-┌───

-    RRCreateScanoutPixmap

-	pixmap: PIXMAP

-	drawable: DRAWABLE

-	width, height: CARD16

-	format: PICTFORMAT

-	rotations: SETofROTATION

-└───

-	Errors: Drawable, Match, Value

-

-	Creates a pixmap which can subsequently be used as a scanout

-	buffer for the screen associated with 'drawable'. 'rotations'

-	is the set of rotation values which may be used with the

-	resulting scanout buffer when it is associated with a CRTC.

-

-	'format' must be one of the supported scanout formats, or a

-	Match error results.

-

-	'width' and 'height' must be within the supported range for

-	the specified format or a Value error results.

-

-	'rotations' must be a subset of those supported for the

-	specified format or a Match error results.

-

-┌───

-    RRSetCrtcSpriteTransform

-	crtc: CRTC

-	position-transform: TRANSFORM

-	image-transform: TRANSFORM

-└───

-	Sets the sprite transforms for the specified crtc, any sprites

-	presented on this crtc will have their positions transformed

-	by the position-transform matrix. Sprite images displayed on the crtc

-	will be transformed by the image-transform matrix.

-

-┌───

-    RRGetCrtcSpriteTransform

-	crtc: CRTC

-      ▶

-	position-transform: TRANSFORM

-	image-transform: TRANSFORM

-└───

-	Gets the sprite transforms for the specified crtc.

-

-┌───

-    RRSetCrtcConfigs

-	drawable: DRAWABLE

-	set: SETofSCREENFLAG

-	screen-pixmap-width: CARD16

-	screen-pixmap-height: CARD16

-	screen-width: CARD16

-	screen-height: CARD16

-	width-in-millimeters: CARD32

-	height-in-millimeters: CARD32

-	configs: LISTofCRTCCONFIG

-      ▶

-	status: RRCONFIGSTATUS

-└───

-	Errors: Value, Match

-

-	This works much like RRSetScreenSize followed by a sequence of

-	RRSetCrtcConfig, except that the entire configuration can be set

-	in a single operation, either succeeding or failing without

-	any partial execution.

-

-	If 'set' includes 'SetScreenPixmapSize', then

-	'screen-pixmap-width' and 'screen-pixmap-height' specify the

-	new screen pixmap size.

-

-	If 'set' includes 'SetScreenSize', then 'screen-width' and

-	'screen-height' specify the new screen size.

-

-	If 'set' includes 'SetScreenSizeInMillimeters', then

-	'width-in-millimeters' and 'height-in-millimeters' specify

-	the new screen physical size.

-

-	If 'set' includes 'SetScreenCrtcs', then 'configs' includes

-	the list of new CRTC configurations.

-

-	In addition to the pre-1.4 semantics, this request adds the

-	ability to specific a scanout pixmap for each crtc, and

-	integrates the 1.4 sprite transform request as well.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-8. Extension Events

-

-Clients MAY select for ConfigureNotify on the root window to be

-informed of screen changes. This may be advantageous if all your

-client needs to know is the size of the root window, as it avoids

-round trips to set up the extension.

-

-RRScreenChangeNotify is sent if RRSelectInput has requested it

-whenever properties of the screen change, which may be due to external

-factors, such as re-cabling a monitor, etc.

-

-┌───

-    RRScreenChangeNotify

-

-	rotation: ROTATION;		new rotation

-	sequenceNumber: CARD16		low 16 bits of request seq. number

-	timestamp: TIMESTAMP		time screen was changed

-	configTimestamp: TIMESTAMP	time config data was changed

-	root: WINDOW			root window of screen

-	window: WINDOW			window requesting notification

-	size-id: SIZEID			index of new SCREENSIZE

-	subpixelOrder: SUBPIXELORDER	order of subpixels

-	widthInPixels: CARD16		width in pixels of the new SCREENSIZE

-	heightInPixels: CARD16		height in pixels of the new SCREENSIZE

-	widthInMillimeters: CARD16	width in mm of the new SCREENSIZE

-	heightInMillimeters: CARD16	height in mm of the new SCREENSIZE

-└───

-	This event is generated whenever the screen configuration is changed

-	and sent to requesting clients. 'timestamp' indicates when the

-	screen configuration was changed. 'configTimestamp' says when the

-	last time the configuration was changed. 'root' is the root of the

-	screen the change occurred on, 'window' is window selecting for this

-	event. 'size-id' contains the index of the current size.

-

-	This event is sent whenever the screen's configuration changes

-	or if a new screen configuration becomes available that was

-	not available in the past. In this case (config-timestamp in

-	the event not being equal to the config-timestamp returned in

-	the last call to RRGetScreenInfo), the client MUST call

-	RRGetScreenInfo to update its view of possible screen

-	configurations to have a correct view of possible screen

-	organizations.

-

-	Clients which select screen change notification events may be

-	sent an event immediately if the screen configuration was

-	changed between when they connected to the X server and

-	selected for notification. This is to prevent a common race

-	that might occur on log-in, where many applications start up

-	just at the time when a display manager or log in script might

-	be changing the screen size or configuration.

-

-	Note that the sizes in this event reflect the new SCREENSIZE and

-	thus will appear rotated by the 'rotation' parameter from the sizes

-	of the screen itself. In other words, when rotation is 90 or 270,

-	widthInPixels in this event will be the same as the height value

-	from a ConfigureNotify that reflects the same size change. This

-	will probably confuse developers.

-

-8.1 Events added in version 1.2 of the RandR extension

-

-┌───

-    RROutputChangeNotify:

-	timestamp: TIMESTAMP		time screen was reconfigured

-	config-timestamp: TIMESTAMP	time available config data was changed

-	window: WINDOW			window requesting notification

-	output: OUTPUT			output affected by change

-	crtc: CRTC			connected CRTC or None

-	mode: MODE			mode in use on CRTC or None

-	connection: CONNECTION		connection status

-└───

-

-	This event is generated whenever the available output configurations

-	have changed and is sent to requesting clients. 'timestamp'

-	indicates when the crtc configuration was changed by a client.

-	'config-timestamp' says when the last time the available

-	configurations changed. 'root' is the root of the screen the change

-	occurred on, 'window' is window selecting for this event. The

-	precise change can be detected by examining the new state of the

-	system.

-

-┌───

-    RROutputPropertyNotify:

-	window: WINDOW			window requesting notification

-	output: OUTPUT			output affected by change

-	atom: ATOM			affected property

-	time: TIMESTAMP			time property was changed

-	subpixel-order: SUBPIXELORDER	order of subpixels

-	state: { NewValue, Deleted }	new property state

-└───

-

-	This event is reported to clients selecting RROutputPropertyChange

-	on the window and is generated with state NewValue when a property

-	of the window is changed using RRChangeOutputProperty even when

-	adding zero-length data and when replacing all or part of a property

-	with identical data.  It is generated with state Deleted when a

-	property of the window is deleted using either

-	RRDeleteOutputProperty or RRGetOutputProperty.  The timestamp

-	indicates the server time when the property was changed.

-

-┌───

-    RRCrtcChangeNotify

-	timestamp: TIMESTAMP		time monitor was changed

-	window: WINDOW			window requesting notification

-	crtc: CRTC			CRTC which changed

-	mode: MODE			new mode

-	rotation: ROTATION;		new rotation

-	x: INT16			x position of CRTC within screen

-	y: INT16			y position of CRTC within screen

-	width: CARD16			width of new mode

-	height: CARD16			height of new mode

-└───

-	This event is generated whenever the CRTC configuration is changed

-	and sent to requesting clients. 'timestamp' indicates when the

-	CRTC configuration was changed. 'window' is window selecting for this

-	event. 'mode' is the new mode, or None if the crtc is disabled.

-	'x' and 'y' mark the location in the screen where this CRTC

-	is reading data. 'width' and 'height' indicate the size of the

-	mode. 'x', 'y, 'width' and 'height' are all zero when 'mode' is None.

-

-	This event is sent whenever the monitor's configuration changes

-	or if a new monitor configuration becomes available that was

-	not available in the past. In this case, the client MUST call

-	RRGetCrtcModes to update its view of possible monitor

-	configurations to have a correct view of possible monitor

-	organizations.

-

-	Clients which select monitor change notification events may be

-	sent an event immediately if the monitor configuration was

-	changed between when they connected to the X server and

-	selected for notification. This is to prevent a common race

-	that might occur on log-in, where many applications start up

-	just at the time when a display manager or log in script might

-	be changing the monitor size or configuration.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-9. Properties

-

-Properties are used for output specific parameters, and for announcing

-static or rarely changing data.  Announced data is typically

-immutable.  Properties are also used for evaluating new parameters

-before adding them to the RandR protocol.

-

-The following properties are hereby declared official, and drivers SHOULD

-prefix driver specific properties with '_', unless they are planned to be

-added to this specification.  List values, that are not declared by the table

-below, and will remain driver specific or are not planned to be added to this

-specification, SHOULD be prefixed with "_" as well in order to avoid name

-space or semantics clashes with future extensions of these values.

-

-Beginning with version 1.3 of the RandR extension, certain properties

-are mandatory and MUST be provided by implementations.  Earlier

-versions of the RandR extension MAY provide these properties as well,

-as long as the semantics are not altered.  Clients SHOULD fall back

-gracefully to lower version functionality, though, if the driver

-doesn't handle a mandatory property correctly.

-

-9.1 Known properties

-

-    "Backlight"			aka RR_PROPERTY_BACKLIGHT

-	Type:			int32

-	Flags:			-

-	Range/List:		0-x (driver specific)

-

-	This property controls the brightness on laptop panels and equivalent

-	displays with a backlight controller. The driver specific maximum

-	value MUST turn the backlight to full brightness, 1 SHOULD turn the

-	backlight to minimum brightness, 0 SHOULD turn the backlight off.

-

-    "CloneList"			aka RR_PROPERTY_CLONE_LIST

-	Type:			int32 [2*n] / Atom pairs

-	Flags:			Immutable

-	Range/List:		0-

-

-	Some combinations of outputs on some cards cannot be served

-	independently from each other, because they are wired up to the same

-	encoder outputs.

-	This property lists all output + signal format pairs that are

-	driven together with this output, and thus can only be programmed in

-	clone mode with the same CRTC.

-	This property MUST be symmetric, but may change with changing signal

-	format. I.e. if the property for DVI-1/VGA specifies VGA-1/VGA to be

-	cloned, VGA-1/VGA has to list DVI-1/VGA as well.

-	Outputs / format pairs listed in this property MUST be included in the

-	CompatibilityList.

-

-    "CompatibilityList"		aka RR_PROPERTY_COMPATIBILITY_LIST

-	Type:			int32 [2*n] / Atom pairs

-	Flags:			Immutable

-	Range/List:		0-

-

-	Some combinations of outputs on some cards cannot be served at all,

-	because the according encoder is only capable of driving one output at

-	a time.

-	This property lists all output + signal format pairs that can be

-	driven together with this output. NULL atoms specify any output / any

-	signal format, respectively.

-	This property MUST be symmetric, but may change with changing signal

-	format. I.e. if the property for DVI-1/TMDS specifies VGA-1/VGA to be

-	available, VGA-1/VGA has to list DVI-1/TMDS as well.

-

-    "ConnectorNumber"		aka RR_PROPERTY_CONNECTOR_NUMBER

-	Type:			int32

-	Flags:			Immutable, Static

-	Range/List:		0-

-

-	Outputs that route their signal to the same connector MUST

-	have the same connector number. Outputs with the same

-	connector number MUST route their signal to the same

-	connector, except if it is 0, which indicates unknown

-	connectivity. 1 is called the primary connector, 2 the

-	secondary. 3 is typically a TV connector, but that is completely

-	driver / hardware dependent.

-	Outputs with the same connector number SHOULD have the same

-	connector type. Meaning and client behavior for mismatching

-	connector types is undefined at the moment.

-

-    "ConnectorType"		aka RR_PROPERTY_CONNECTOR_TYPE

-	Type:			int32 / Atom

-	Flags:			Immutable, Static

-	Range/List:		unknown VGA DVI DVI‐I DVI‐A DVI‐D HDMI Panel

-				TV TV-Composite TV-SVideo TV-Component

-				TV-SCART TV-C4 DisplayPort

-

-	Connector type, as far as known to the driver.

-	Values with dashes (TV‐Composite) describe more specific versions of

-	the base values (TV). The former SHOULD be used if the connector is

-	not capable of producing other signal formats. The later SHOULD be

-	used if the exact connector is unknown, or the connector is a

-	multi‐format connector that is not described otherwise. DVI, for

-	instance, SHOULD be handled like a DVI‐I connector, unless additional

-	information is available to the user agent. PANEL describes

-	laptop‐internal (normally LVDS) displays. TV, TV‐SCART, TV‐Component,

-	and TV‐C4 with signal format VGA are valid combinations and describe

-	RGB TV signals.

-

-    "EDID"			aka RR_PROPERTY_RANDR_EDID

-	Type:			int8 [n]

-	Flags:			Immutable

-	Range/List:		-

-

-	Raw EDID data from the device attached to the according

-	output. Should include main EDID data and all extension

-	blocks. Previously known as EdidData.

-

-    "SignalFormat"		aka RR_PROPERTY_SIGNAL_FORMAT

-	Type:			int32 / Atom

-	Flags:			-

-	Range/List:		unknown VGA TMDS LVDS Composite Composite-PAL

-				Composite-NTSC Composite-SECAM SVideo

-				Component DisplayPort

-

-	Signal format / physical protocol format that is used for the

-	specified output. valid-values lists all possible formats on this

-	output, which SHOULD be a subset of the list above and MUST be static.

-	Values with dashes (Composite-PAL) describe more specific versions of

-	the base values (Composite) and SHOULD be used if known to the driver.

-	A driver MAY change this property of an output if the underlying

-	hardware indicates a protocol change (e.g. TV formats).  Clients are

-	allowed to change the signal format in order to select a different

-	signal format (e.g. Composite etc.) or physical protocol (e.g. VGA or

-	TMDS on DVI-I).

-	Laptop panels SHOULD not be detected with this property, but rather by

-	ConnectorType.

-

-    "SignalProperties"		aka RR_PROPERTY_SIGNAL_FORMAT

-	Type:			int32 [n] / Atom

-	Flags:			-

-	Range/List:		For Composite signals:

-				  NTSC NTSC-M NTSC-J NTSC-N NTSC-4.43 NTSC-film

-				  PAL PAL-B PAL-G PAL-H PAL-H PAL-I PAL-M PAL-D

-				  PAL-N PAL-Nc PAL-L PAL-60

-				  SECAM SECAM-L SECAM-B SECAM-G SECAM-D SECAM-K

-				  SECAM-H SECAM-K

-				For TMDS signals:

-				  SingleLink DualLink

-				For DisplayPort signals:

-				  Lane1 Lane2 Lane4 LowSpeed HiSpeed

-

-	Properties of the signal format that is currently used for the

-	specified output. valid-values lists all possible properties on this

-	output, which SHOULD be a subset of the list above. It will change if

-	SignalFormat changes.  Multiple properties are allowed.

-	Values with dashes (PAL-B) describe more specific versions of the base

-	values (PAL) and SHOULD be used if known to the driver.  A driver MAY

-	change this property of an output if the underlying hardware indicates

-	a signal change (e.g. TV formats).  Clients are allowed to change the

-	properties in order to select a different signal subformat.

-

-

-9.2 Properties introduced with version 1.2 of the RandR extension

-

-Property			Immutable	Mandatory since

-────────			─────────	───────────────

-EDID				yes		n/a

-

-EDID is provided by the RandR frontend, thus not driver specific.

-

-

-9.3 Properties introduced with version 1.3 of the RandR extension

-

-Property			Immutable	Mandatory since

-────────			─────────	───────────────

-CloneList			yes		not mandatory

-CompatibilityList		yes		not mandatory

-ConnectorNumber			yes: static	not mandatory

-ConnectorType			yes: static	RandR 1.3

-SignalFormat			no		RandR 1.3

-SignalProperties		no		not mandatory

-

-9.4 Properties introduced with version 1.3.1 of the RandR extension

-

-Property			Immutable	Mandatory since

-────────			─────────	───────────────

-Backlight			no		not mandatory

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-10. Extension Versioning

-

-The RandR extension was developed in parallel with the implementation

-to ensure the feasibility of various portions of the design. As

-portions of the extension are implemented, the version number of the

-extension has changed to reflect the portions of the standard provided.

-This document describes the version 1.2 of the specification, the

-partial implementations have version numbers less than that. Here's a

-list of what each version provided:

-

-	0.0: This prototype implemented resize and rotation in the

-	     TinyX server Used approximately the protocol described in

-	     the Usenix paper. Appeared in the TinyX server in

-	     XFree86 4.2, but not in the XFree86 main server.

-

-	0.1: Added subpixel order, added an event for subpixel order.

-	     This version was never checked in to XFree86 CVS.

-

-	1.0: Implements resize, rotation, and reflection. Implemented

-	     both in the XFree86 main server (size change only at this

-	     date), and fully (size change, rotation, and reflection)

-	     in XFree86's TinyX server.

-

-	1.1: Added refresh rates

-

-	1.2: Separate screens from CRTCs and outputs, switch to full VESA

-	     modes

-

-	1.3: Added cheap version of RRGetScreenResources.  Added CRTC

-	     transformations.  Added panning.  Added primary outputs.

-	     Added standard properties.

-

-Compatibility between 0.0 and 1.0 was *NOT* preserved, and 0.0 clients

-will fail against 1.0 servers. The wire encoding op-codes were

-changed for GetScreenInfo to ensure this failure in a relatively

-graceful way. Version 1.1 servers and clients are cross compatible with

-1.0. Version 1.1 is considered to be stable and we intend upward

-compatibility from this point. Version 1.2 offers an extended model of the

-system with multiple output support. Version 1.3 adds a cheap version of

-GetScreenResources to avoid expensive DDC operations, CRTC transformations,

-panning, and the primary output concept. 1.2 and 1.3 are backward-compatible

-with 1.1.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-11. Relationship with other extensions

-

-Two other extensions have a direct relationship with this extension. This

-section attempts to explain how these three are supposed to work together.

-

-11.1 XFree86-VidModeExtension

-

-XFree86-VidModeExtension changes the configuration of a single monitor

-attached to the screen without changing the configuration of the screen

-itself. It provides the ability to specify new mode lines for the server to

-use along with selecting among existing mode lines. As it uses screen

-numbers instead of window identifiers, it can be used to affect multiple

-monitors in a single-screen Xinerama configuration. However, the association

-between screen numbers and root windows in a multi-Screen environment is not

-defined by the extension. Version 2.0 of this extension added the ability to

-adjust the DAC values in a TrueColor server to modify the brightness curves

-of the display.

-

-All of the utility of this extension is subsumed by RandR version 1.2, RandR

-should be used in preference to XFree86-VidModeExtension where both are

-present.

-

-11.2 Xinerama

-

-Xinerama provides a mechanism for describing the relationship between the

-overall screen display and monitors placed within that area. As such, it

-provides the query functionality of RandR 1.2 without any of the

-configuration functionality. Applications using Xinerama to discover

-monitor geometry can continue to do so, with the caveat that they will not be

-informed of changes when they occur. However, Xinerama configuration data

-will be updated, so applications selecting for RandR notification and

-re-querying the configuration with the Xinerama extension will get updated

-information. It is probably better to view RandR as a superset of Xinerama

-at this point and use it in preference to Xinerama where both are present.

-

-			      ❧❧❧❧❧❧❧❧❧❧❧

-

-Appendix A. Protocol Encoding

-

-Syntactic Conventions

-

-This document uses the same syntactic conventions as the core X

-protocol encoding document.

-

-A.1 Common Types

-

-┌───

-    ROTATION

-	0x0001	Rotate_0

-	0x0002	Rotate_90

-	0x0004	Rotate_180

-	0x0008	Rotate_270

-	0x0010	Reflect_X

-	0x0020	Reflect_Y

-└───

-	Used to encode both sets of possible rotations and individual

-	selected rotations.

-

-┌───

-    RRSELECTMASK

-	0x0001	ScreenChangeNotifyMask

-	0x0002	CrtcChangeNotifyMask		Added in version 1.2

-	0x0004	OutputChangeNotifyMask		Added in version 1.2

-	0x0008	OutputPropertyNotifyMask	Added in version 1.2

-└───

-      Event select mask for RRSelectInput

-

-┌───

-    RRCONFIGSTATUS

-	0x0 Success

-	0x1 InvalidConfigTime

-	0x2 InvalidTime

-	0x3 Failed

-└───

-	Return status for requests which depend on time.

-

-┌───

-    MODEINFO (32)				Added in version 1.2

-	4	CARD32		id

-	2	CARD16		width in pixels

-	2	CARD16		height in pixels

-	4	CARD32		dot clock

-	2	CARD16		h sync start

-	2	CARD16		h sync end

-	2	CARD16		h total

-	2	CARD16		h skew

-	2	CARD16		v sync start

-	2	CARD16		v sync end

-	2	CARD16		v total

-	2	CARD16		name length

-	4	SETofMODEFLAG	mode flags

-└───

-

-	An output mode specifies the complete CRTC timings for

-	a specific mode. The vertical and horizontal synchronization rates

-	can be computed given the dot clock and the h total/v total

-	values. If the dot clock is zero, then all of the timing

-	parameters and flags are not used, and must be zero as this

-	indicates that the timings are unknown or otherwise unused.

-	The name itself will be encoded separately in each usage.

-

-┌───

-    MODEFLAG

-	0x00000001	HSyncPositive

-	0x00000002	HSyncNegative

-	0x00000004	VSyncPositive

-	0x00000008	VSyncNegative

-	0x00000010	Interlace

-	0x00000020	DoubleScan

-	0x00000040	CSync

-	0x00000080	CSyncPositive

-	0x00000100	CSyncNegative

-	0x00000200	HSkewPresent

-	0x00000400	BCast

-	0x00000800	PixelMultiplex

-	0x00001000	DoubleClock

-	0x00002000	ClockDivideBy2

-└───

-┌───

-    CONNECTION

-	0		Connected

-	1		Disconnected

-	2		UnknownConnection

-└───

-

-

-A.2 Protocol Requests

-

-Opcodes 1 and 3 were used in the 0.0 protocols, and will return

-errors if used in version 1.0.

-

-┌───

-    RRQueryVersion

-

-	1	CARD8			major opcode

-	1	0			RandR opcode

-	2	3			length

-	4	CARD32			major version

-	4	CARD32			minor version

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	0			reply length

-	1	CARD32			major version

-	1	CARD32			minor version

-└───

-┌───

-    RRSetScreenConfig

-

-	1	CARD8			major opcode

-	1	2			RandR opcode

-	2	6			length

-	4	WINDOW			window on screen to be configured

-	4	TIMESTAMP		timestamp

-	4	TIMESTAMP		config timestamp

-	2	SIZEID			size index

-	2	ROTATION		rotation/reflection

-	2	CARD16			refresh rate (1.1 only)

-	2	CARD16			pad

-      ▶

-	1	1			Reply

-	1	RRCONFIGSTATUS		status

-	2	CARD16			sequence number

-	4	0			reply length

-	4	TIMESTAMP		new timestamp

-	4	TIMESTAMP		new configuration timestamp

-	4	WINDOW			root

-	2	SUBPIXELORDER		subpixel order defined in Render

-	2	CARD16			pad4

-	4	CARD32			pad5

-	4	CARD32			pad6

-└───

-┌───

-    RRSelectInput

-

-	1	CARD8			major opcode

-	1	4			RandR opcode

-	2	3			length

-	4	WINDOW			window

-	2	SETofRRSELECTMASK	enable

-	2	CARD16			pad

-└───

-┌───

-    RRGetScreenInfo

-

-	1	CARD8			major opcode

-	1	5			RandR opcode

-	2	2			length

-	4	WINDOW			window

-      ▶

-	1	1			Reply

-	1	CARD8			set of Rotations

-	2	CARD16			sequence number

-	4	0			reply length

-	4	WINDOW			root window

-	4	TIMESTAMP		timestamp

-	4	TIMESTAMP		config timestamp

-	2	CARD16			number of SCREENSIZE following

-	2	SIZEID			current size index

-	2	ROTATION		current rotation and reflection

-	2	CARD16			current rate (added in version 1.1)

-	2	CARD16			length of rate info (number of CARD16s)

-	2	CARD16			pad

-

-	SCREENSIZE

-	2	CARD16			width in pixels

-	2	CARD16			height in pixels

-	2	CARD16			width in millimeters

-	2	CARD16			height in millimeters

-

-	REFRESH

-	2	CARD16			number of rates (n)

-	2n	CARD16			rates

-└───

-

-A.2.1 Protocol Requests added with version 1.2

-

-┌───

-    RRGetScreenSizeRange

-	1	CARD8			major opcode

-	1	6			RandR opcode

-	2	2			length

-	4	WINDOW			window

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	0			reply length

-	2	CARD16			minWidth

-	2	CARD16			minHeight

-	2	CARD16			maxWidth

-	2	CARD16			maxHeight

-	16				unused

-└───

-┌───

-    RRSetScreenSize

-	1	CARD8			major opcode

-	1	7			RandR opcode

-	2	5			length

-	4	WINDOW			window

-	2	CARD16			width

-	2	CARD16			height

-	4	CARD32			width in millimeters

-	4	CARD32			height in millimeters

-└───

-┌───

-    RRGetScreenResources

-	1	CARD8			major opcode

-	1	8			RandR opcode

-	2	2			length

-	4	WINDOW			window

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	c+o+8m+(b+p)/4		reply length

-	4	TIMESTAMP		timestamp

-	4	TIMESTAMP		config-timestamp

-	2	c			number of CRTCs

-	2	o			number of outputs

-	2	m			number of modeinfos

-	2	b			total bytes in mode names

-	8				unused

-	4c	LISTofCRTC		crtcs

-	4o	LISTofOUTPUT		outputs

-	32m	LISTofMODEINFO		modeinfos

-	b	STRING8			mode names

-	p				unused, p=pad(b)

-└───

-┌───

-    RRGetOutputInfo

-	1	CARD8			major opcode

-	1	9			RandR opcode

-	2	3			length

-	4	OUTPUT			output

-	4	TIMESTAMP		config-timestamp

-      ▶

-	1	1			Reply

-	1	RRCONFIGSTATUS		status

-	2	CARD16			sequence number

-	4	1+c+m+(n+p)/4		reply length

-	4	TIMESTAMP		timestamp

-	4	CRTC			current connected crtc

-	4	CARD32			width in millimeters

-	4	CARD32			height in millimeters

-	1	CONNECTION		connection

-	1	SUBPIXELORDER		subpixel-order

-	2	c			number of CRTCs

-	2	m			number of modes

-	2	p			number of preferred modes

-	2	o			number of clones

-	2	n			length of name

-	4c	LISTofCRTC		crtcs

-	4m	LISTofMODE		modes

-	4o	LISTofOUTPUT		clones

-	n	STRING8			name

-	p				unused, p=pad(n)

-└───

-┌───

-    RRListOutputProperties

-	1	CARD8			major opcode

-	1	10			RandR opcode

-	2	2			length

-	4	OUTPUT			output

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	n			reply length

-	2	n			number of ATOMs in atoms

-	22				unused

-	4n	LISTofATOM		atoms

-└───

-┌───

-    RRQueryOutputProperty

-	1	CARD8			major opcode

-	1	11			RandR opcode

-	2	3			request length

-	4	OUTPUT			output

-	4	ATOM			property

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	n			reply length

-	1	BOOL			pending

-	1	BOOL			range

-	1	BOOL			immutable

-	21				unused

-	4n	LISTofINT32		valid values

-└───

-┌───

-    RRConfigureOutputProperty

-	1	CARD8			major opcode

-	1	12			RandR opcode

-	2	4+n			request length

-	4	OUTPUT			output

-	4	ATOM			property

-	1	BOOL			pending

-	1	BOOL			range

-	2				unused

-	4n	LISTofINT32		valid values

-└───

-┌───

-    RRChangeOutputProperty

-	1	CARD8			major opcode

-	1	13			RandR opcode

-	2	6+(n+p)/4		request length

-	4	OUTPUT			output

-	4	ATOM			property

-	4	ATOM			type

-	1	CARD8			format

-	1				mode

-		0	Replace

-		1	Prepend

-		2	Append

-	2				unused

-	4	CARD32			length of data in format units

-					(= n for format = 8)

-					(= n/2 for format = 16)

-					(= n/4 for format = 32)

-	n	LISTofBYTE		data

-					(n is a multiple of 2 for format = 16)

-					(n is a multiple of 4 for format = 32)

-	p				unused, p=pad(n)

-└───

-┌───

-    RRDeleteOutputProperty

-	1	CARD8			major opcode

-	1	14			RandR opcode

-	2	3			request length

-	4	OUTPUT			output

-	4	ATOM			property

-└───

-┌───

-    RRGetOutputProperty

-	1	CARD8			major opcode

-	1	15			RandR opcode

-	2	7			request length

-	4	OUTPUT			output

-	4	ATOM			property

-	4	ATOM			type

-		0	AnyPropertyType

-	4	CARD32			long-offset

-	4	CARD32			long-length

-	1	BOOL			delete

-	1	BOOL			pending

-	2				unused

-      ▶

-	1	1			Reply

-	1	CARD8			format

-	2	CARD16			sequence number

-	4	(n+p)/4			reply length

-	4	ATOM			type

-		0	None

-	4	CARD32			bytes-after

-	4	CARD32			length of value in format units

-					(= 0 for format = 0)

-					(= n for format = 8)

-					(= n/2 for format = 16)

-					(= n/4 for format = 32)

-	12				unused

-	n	LISTofBYTE		value

-					(n is zero for format = 0)

-					(n is a multiple of 2 for format = 16)

-					(n is a multiple of 4 for format = 32)

-	p				unused, p=pad(n)

-└───

-┌───

-    RRCreateMode

-	1	CARD8			major opcode

-	1	16			RandR opcode

-	2	12+(n+p)/4		length

-	4	WINDOW			window

-	32	MODEINFO		mode

-	n	STRING8			mode name

-	p				unused, p=pad(n)

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	0			reply length

-	4	MODE			mode

-	20				unused

-└───

-┌───

-    RRDestroyMode

-	1	CARD8			major opcode

-	1	17			RandR opcode

-	2	2			length

-	4	MODE			mode

-└───

-┌───

-    RRAddOutputMode

-	1	CARD8			major opcode

-	1	18			RandR opcode

-	2	3			length

-	4	OUTPUT			output

-	4	MODE			mode

-└───

-┌───

-    RRDeleteOutputMode

-	1	CARD8			major opcode

-	1	19			RandR opcode

-	2	3			length

-	4	OUTPUT			output

-	4	MODE			mode

-└───

-┌───

-    RRGetCrtcInfo

-	1	CARD8			major opcode

-	1	20			RandR opcode

-	2	3			length

-	4	CRTC			crtc

-	4	TIMESTAMP		config-timestamp

-      ▶

-	1	1			Reply

-	1	RRCONFIGSTATUS		status

-	2	CARD16			sequence number

-	4	o+p			reply length

-	4	TIMESTATMP		timestamp

-	2	INT16			x

-	2	INT16			y

-	2	CARD16			width

-	2	CARD16			height

-	4	MODE			mode

-	2	ROTATION		current rotation and reflection

-	2	ROTATION		set of possible rotations

-	2	o			number of outputs

-	2	p			number of possible outputs

-	4o	LISTofOUTPUT		outputs

-	4p	LISTofOUTPUT		possible outputs

-└───

-┌───

-    RRSetCrtcConfig

-	1	CARD8			major opcode

-	1	21			RandR opcode

-	2	7+2n			length

-	4	CRTC			crtc

-	4	TIMESTAMP		timestamp

-	4	TIMESTAMP		config timestamp

-	2	INT16			x

-	2	INT16			y

-	4	MODE			mode

-	2	ROTATION		rotation/reflection

-	2				unused

-	8n	LISTofOUTPUT		outputs

-      ▶

-	1	1			Reply

-	1	RRCONFIGSTATUS		status

-	2	CARD16			sequence number

-	4	0			reply length

-	4	TIMESTAMP		new timestamp

-	20				unused

-└───

-┌───

-    RRGetCrtcGammaSize

-	1	CARD8			major opcode

-	1	22			RandR opcode

-	2	2			length

-	4	CRTC			crtc

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	0			reply length

-	2	CARD16			size

-	22				unused

-└───

-┌───

-    RRGetCrtcGamma

-	1	CARD8			major opcode

-	1	23			RandR opcode

-	2	2			length

-	4	CRTC			crtc

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	(6n+2)/4		reply length

-	2	n			size

-	20				unused

-	2n	LISTofCARD16		red

-	2n	LISTofCARD16		green

-	2n	LISTofCARD16		blue

-	p				unused, p=pad(6n)

-└───

-┌───

-    RRSetCrtcGamma

-	1	CARD8			major opcode

-	1	24			RandR opcode

-	2	3+(6n+2)/4		length

-	4	CRTC			crtc

-	2	n			size

-	2				unused

-	2n	LISTofCARD16		red

-	2n	LISTofCARD16		green

-	2n	LISTofCARD16		blue

-	p				unused, p=pad(6n)

-└───

-

-A.2.2 Protocol Requests added with version 1.3

-

-┌───

-    RRGetScreenResourcesCurrent

-	1	CARD8			major opcode

-	1	25			RandR opcode

-	2	2			length

-	4	WINDOW			window

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	c+o+8m+(b+p)/4		reply length

-	4	TIMESTAMP		timestamp

-	4	TIMESTAMP		config-timestamp

-	2	c			number of CRTCs

-	2	o			number of outputs

-	2	m			number of modeinfos

-	2	b			total bytes in mode names

-	8				unused

-	4c	LISTofCRTC		crtcs

-	4o	LISTofOUTPUT		outputs

-	32m	LISTofMODEINFO		modeinfos

-	b	STRING8			mode names

-	p				unused, p=pad(b)

-└───

-

-┌───

-    RRSetCrtcTransform

-	1	CARD8			major opcode

-	1	26			RandR opcode

-	2	12+(n+p)/4+v		length

-	4	CRTC			crtc

-	36	TRANSFORM		transform

-	2	CARD16			filter length

-	2				unused

-	n	STRING8			filter name

-	p				unused, p=pad(n)

-	4v	FIXED			filter params

-└───

-

-┌───

-    RRGetCrtcTransform

-	1	CARD8			major opcode

-	1	27			RandR opcode

-	2	2			length

-	4	CRTC			crtc

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	16+(pn+pnp)/4+(cn+cnp)/4+pf+cf	reply length

-	36	TRANSFORM		pending transform

-	1	BOOL			has transforms

-	3				unused

-	36	TRANSFORM		current transform

-	4				unused

-	2	pn			pending filter name length

-	2	pf			pending filter num params

-	2	cn			current filter name length

-	2	cf			current filter num params

-	pn	STRING8			pending filter name

-	pnp				unused, pnp=pad(pn)

-	4*pf	FIXED			pending filter params

-	cn	STRING8			current filter name

-	cnp				unused, cnp=pad(cn)

-	4*cf	FIXED			current filter params

-└───

-

-┌───

-    RRGetPanning

-	1	CARD8			major opcode

-	1	28			RandR opcode

-	2	2			length

-	4	CRTC			crtc

-      ▶

-	1	1			Reply

-	1	RRCONFIGSTATUS		status

-	2	CARD16			sequence number

-	4	1			reply length

-	4	TIMESTAMP		timestamp

-	2	CARD16			left

-	2	CARD16			top

-	2	CARD16			width

-	2	CARD16			height

-	2	CARD16			track_left

-	2	CARD16			track_top

-	2	CARD16			track_width

-	2	CARD16			track_height

-	2	INT16			border_left

-	2	INT16			border_top

-	2	INT16			border_right

-	2	INT16			border_bottom

-└───

-┌───

-    RRSetPanning

-	1	CARD8			major opcode

-	1	29			RandR opcode

-	2	9			length

-	4	CRTC			crtc

-	4	TIMESTAMP		timestamp

-	2	CARD16			left

-	2	CARD16			top

-	2	CARD16			width

-	2	CARD16			height

-	2	CARD16			track_left

-	2	CARD16			track_top

-	2	CARD16			track_width

-	2	CARD16			track_height

-	2	INT16			border_left

-	2	INT16			border_top

-	2	INT16			border_right

-	2	INT16			border_bottom

-      ▶

-	1	1			Reply

-	1	RRCONFIGSTATUS		status

-	2	CARD16			sequence number

-	4	0			reply length

-	4	TIMESTAMP		new timestamp

-	20				unused

-└───

-

-┌───

-    RRSetOutputPrimary

-	1	CARD8			major opcode

-	1	30			RandR opcode

-	2	3			length

-	4	WINDOW			window

-	4	OUTPUT			output

-└───

-

-┌───

-    RRGetOutputPrimary

-	1	CARD8			major opcode

-	1	31			RandR opcode

-	2	2			length

-	4	WINDOW			window

-      ▶

-	1	1			Reply

-	1				unused

-	2	CARD16			sequence number

-	4	CARD32			length

-	4	OUTPUT			output

-	4	CARD32			pad1

-	4	CARD32			pad2

-	4	CARD32			pad3

-	4	CARD32			pad4

-└───

-

-A.3 Protocol Events

-

-┌───

-    RRScreenChangeNotify

-	1	Base + 0		code

-	1	ROTATION		new rotation and reflection

-	2	CARD16			sequence number

-	4	TIMESTAMP		timestamp

-	4	TIMESTAMP		configuration timestamp

-	4	WINDOW			root window

-	4	WINDOW			request window

-	2	SIZEID			size ID

-	2	SUBPIXELORDER		subpixel order defined in Render

-	2	CARD16			width in pixels

-	2	CARD16			height in pixels

-	2	CARD16			width in millimeters

-	2	CARD16			height in millimeters

-└───

-

-A.3.1 Protocol Events added with version 1.2

-

-┌───

-    RRCrtcChangeNotify

-	1	Base + 1		code

-	1	0			sub-code

-	2	CARD16			sequence number

-	4	TIMESTAMP		timestamp

-	4	WINDOW			request window

-	4	CRTC			crtc affected

-	4	MODE			mode in use

-	2	ROTATION		new rotation and reflection

-	2				unused

-	2	INT16			x

-	2	INT16			y

-	2	CARD16			width

-	2	CARD16			height

-└───

-┌───

-    RROutputChangeNotify

-	1	Base + 1		code

-	1	1			sub-code

-	2	CARD16			sequence number

-	4	TIMESTAMP		timestamp

-	4	TIMESTAMP		configuration timestamp

-	4	WINDOW			request window

-	4	OUTPUT			output affected

-	4	CRTC			crtc in use

-	4	MODE			mode in use

-	2	ROTATION		rotation in use

-	1	CONNECTION		connection status

-	1	SUBPIXELORDER		subpixel order

-└───

-┌───

-    RROutputPropertyNotify

-	1	Base + 1		code

-	1	2			sub-code

-	2	CARD16			sequence number

-	4	WINDOW			window

-	4	OUTPUT			output

-	4	ATOM			atom

-	4	TIMESTAMP		time

-	1				state

-		0	NewValue

-		1	Deleted

-	11				unused

-└───

-

-A.4 Protocol Errors

-

-┌───

-    ERRORS

-	Base + 0		Output

-	Base + 1		Crtc

-	Base + 2		Mode

-└───

-

-Bibliography

-

-[RANDR] Gettys, Jim and Keith Packard, "The X Resize and Rotate

-	Extension - RandR", Proceedings of the 2001 USENIX Annual

-	Technical Conference, Boston, MA

-

-[RENDER]

-	Packard, Keith, "The X Rendering Extension", work in progress,

-	http://cgit.freedesktop.org/xorg/proto/renderproto/tree/renderproto.txt

+	       The X Resize, Rotate and Reflect Extension
+			     Version 1.4.0
+			       2009-10-5
+
+			      Jim Gettys
+			   Jim.Gettys@hp.com
+		     Cambridge Research Laboratory
+				HP Labs
+			Hewlett Packard Company
+
+			     Keith Packard
+			keith.packard@intel.com
+		     Open Source Technology Center
+			   Intel Corporation
+
+1. Introduction
+
+The X Resize, Rotate and Reflect Extension, called RandR for short,
+brings the ability to resize, rotate and reflect the root window of a
+screen. It is based on the X Resize and Rotate Extension as specified
+in the Proceedings of the 2001 Usenix Technical Conference [RANDR].
+
+RandR as implemented and integrated into the X server differs in
+one substantial fashion from the design discussed in that paper: that
+is, RandR 1.0 does not implement the depth switching described in that
+document, and the support described for that in the protocol in that
+document and in the implementation has been removed from the
+protocol described here, as it has been overtaken by events.
+
+These events include:
+      ► Modern toolkits (in this case, GTK+ 2.x) have progressed to the point
+	of implementing migration between screens of arbitrary depths
+      ► The continued advance of Moore's law has made limited amounts of VRAM
+	less of an issue, reducing the pressure to implement depth switching
+	on laptops or desktop systems
+      ► The continued decline of legacy toolkits whose design would have
+	required depth switching to support migration
+      ► The lack of depth switching implementation experience in the
+	intervening time, due to events beyond our control
+
+Additionally, the requirement to support depth switching might
+complicate other re-engineering of the device independent part of the
+X server that is currently being contemplated.
+
+Rather than further delaying RandR's widespread deployment for a feature
+long wanted by the community (resizing of screens, particularly on laptops),
+or the deployment of a protocol design that might be flawed due to lack of
+implementation experience, we decided to remove depth switching from the
+protocol. It may be implemented at a later time if resources and
+interests permit as a revision to the protocol described here, which will
+remain a stable base for applications. The protocol described here has been
+implemented in the main X.org server, and more fully in the hw/kdrive
+implementation in the distribution, which fully implements resizing,
+rotation and reflection.
+
+1.2 Introduction to version 1.2 of the extension
+
+One of the significant limitations found in version 1.1 of the RandR
+protocol was the inability to deal with the Xinerama model where multiple
+monitors display portions of a common underlying screen. In this environment,
+zero or more video outputs are associated with each CRT controller which
+defines both a set of video timings and a 'viewport' within the larger
+screen. This viewport is independent of the overall size of the screen, and
+may be located anywhere within the screen.
+
+The effect is to decouple the reported size of the screen from the size
+presented by each video output, and to permit multiple outputs to present
+information for a single screen.
+
+To extend RandR for this model, we separate out the output, CRTC and screen
+configuration information and permit them to be configured separately. For
+compatibility with the 1.1 version of the protocol, we make the 1.1 requests
+simultaneously affect both the screen and the (presumably sole) CRTC and
+output. The set of available outputs are presented with UTF-8 encoded names
+and may be connected to CRTCs as permitted by the underlying hardware. CRTC
+configuration is now done with full mode information instead of just size
+and refresh rate, and these modes have names. These names also use UTF-8
+encoding. New modes may also be added by the user.
+
+Additional requests and events are provided for this new functionality.
+
+       ┌────────────────────────────────┬──────────┐
+    ┏━━━━━━━┳───────────────┐       ╔════════╗ ╔════════╗
+    ┃   1   ┃               │       ║   A    ║ ║   B    ║
+    ┃   ┏━━━╋━━━━━━━━━━━━━━━┫       ║        ║ ║        ║
+    ┣━━━╋━━━┛               ┃       ╚════════╝ ╚════════╝
+    │   ┃         2         ┃─────────────────┐
+    │   ┃                   ┃        ╔═══════════════════╗
+    │   ┃                   ┃        ║                   ║
+    │   ┗━━━━━━━━━━━━━━━━━━━┫        ║        C          ║
+    └───────────────────────┘        ║                   ║
+    ┌──────┐  ┏━━━━┓  ╔══════╗       ║                   ║
+    │screen│  ┃CRTC┃  ║output║       ╚═══════════════════╝
+    └──────┘  ┗━━━━┛  ╚══════╝
+
+In this picture, the screen is covered (incompletely) by two CRTCs. CRTC1
+is connected to two outputs, A and B. CRTC2 is connected to output C.
+Outputs A and B will present exactly the same region of the screen using
+the same mode line. Output C will present a different (larger) region of
+the screen using a different mode line.
+
+RandR provides information about each available CRTC and output; the
+connection between CRTC and output is under application control, although
+the hardware will probably impose restrictions on the possible
+configurations. The protocol doesn't try to describe these restrictions,
+instead it provides a mechanism to find out what combinations are supported.
+
+1.3 Introduction to version 1.3 of the extension
+
+Version 1.3 builds on the changes made with version 1.2 and adds some new
+capabilities without fundmentally changing the extension again. The
+following features are added in this version:
+
+   • Projective Transforms. The implementation work for general rotation
+     support made it trivial to add full projective transformations. These
+     can be used to scale the screen up/down as well as perform projector
+     keystone correct or other effects.
+
+   • Panning. It was removed with RandR 1.2 because the old semantics didn't
+     fit any longer. With RandR 1.3 panning can be specified per crtc.
+
+1.4 Introduction to version 1.4 of the extension
+
+Version 1.4 adds a couple more capabilities to further expose the
+underlying hardware to clients
+
+   • Per-crtc pixmaps. This provides for multiple scan-out buffers
+     which applications can create and assign to arbitrary collections
+     of crtcs.
+
+   • Sprite position and image transforms. These provide a projective
+     transform for both the hot spot location and the sprite image
+     itself for each CRTC.
+
+   • RRSetCrtcConfigs request. This supplies a set of
+     crtc configurations to the server that must be applied together
+     or not at all. This can reduce screen flicker while also
+     providing the server a complete configuration for appropriate
+     resource management.
+
+The first two additions, per-crtc pixmaps and sprite transforms are
+designed to solve two problems:
+
+ 1) Screen transforms. The software transform code in the X server
+    uses a shadow frame buffer, adding another copy to every graphics
+    operation. Worse, the server has no idea about when clients are
+    done drawing a frame, so the user gets additional latency and
+    judder.
+
+    The goal is to move this operation out to the compositing manager
+    which already deals with an extra copy of the frame buffer for
+    many operations. Have the compositing manager create and draw to a
+    separate pixmap for scanout. It can perform whatever transforms
+    are required to get the image in the right orientation for the
+    user.
+
+ 2) Hardware scanout engine size limits. With a single scanout buffer
+    for the entire screen, it's possible for the user to ask for a
+    configuration which requires that scanout buffer to be larger than
+    the hardware is capable of scanning out from. Again, having the
+    compositing manager create a pixmap for each CRTC will allow for
+    any configuration where monitor position within the virtual space
+    isn't limited by the scanout limits.
+
+In both of these cases, the Sprite transforms are necessary to ensure
+that the sprite appears at the desired spot on each CRTC and with the
+right shape.
+
+1.99 Acknowledgements
+
+Our thanks to the contributors to the design found on the xpert mailing
+list, in particular:
+
+Alan Hourihane for work on the early implementation
+Andrew C. Aitchison for help with the XFree86 DDX implementation
+Andy Ritger for early questions about how mergefb/Xinerama work with RandR
+Carl Worth for editing the specification and Usenix paper
+David Dawes for XFree86 DDX integration work
+Thomas Winischhofer for the hardware-accelerated SiS rotation implementation
+Matthew Tippett and Kevin Martin for splitting outputs and CRTCs to more
+fully expose what video hardware can do
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+2. Screen change model
+
+Screens may change dynamically, either under control of this extension, or
+due to external events. Examples include: monitors being swapped, pressing a
+button to switch from internal display to an external monitor on a laptop,
+or, eventually, the hotplug of a display card entirely on busses such as
+Cardbus or Express Card which permit hot-swap (which will require other work
+in addition to this extension).
+
+Since the screen configuration is dynamic and asynchronous to the client and
+may change at any time RandR provides mechanisms to ensure that your clients
+view is up to date with the configuration possibilities of the moment and
+enforces applications that wish to control the configuration to prove that
+their information is up to date before honoring requests to change the
+screen configuration (by requiring a timestamp on the request).
+
+Interested applications are notified whenever the screen configuration
+changes, providing the current size of the screen and subpixel order (see
+the Render extension [RENDER]), to enable proper rendering of subpixel
+decimated client text to continue, along with a time stamp of the
+configuration change. A client must refresh its knowledge of the screen
+configuration before attempting to change the configuration after a
+notification, or the request will fail.
+
+To avoid multiplicative explosion between orientation, reflection and sizes,
+the sizes are only those sizes in the normal (0) rotation.
+
+Rotation and reflection and how they interact can be confusing. In Randr,
+the coordinate system is rotated in a counter-clockwise direction relative
+to the normal orientation. Reflection is along the window system coordinate
+system, not the physical screen X and Y axis, so that rotation and
+reflection do not interact. The other way to consider reflection is to is
+specified in the "normal" orientation, before rotation, if you find the
+other way confusing.
+
+We expect that most clients and toolkits will be oblivious to changes to the
+screen structure, as they generally use the values in the connections Display
+structure directly. By toolkits updating the values on the fly, we believe
+pop-up menus and other pop up windows will position themselves correctly in
+the face of screen configuration changes (the issue is ensuring that pop-ups
+are visible on the reconfigured screen).
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+3. Data Types
+
+The subpixel order is shared with the Render extension, and is documented
+there. The only datatype defined is the screen size, defined in the normal
+(0 degree) orientation.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+4. Errors
+
+Errors are sent using core X error reports.
+
+Output
+	A value for an OUTPUT argument does not name a defined OUTPUT.
+CRTC
+	A value for a CRTC argument does not name a defined CRTC.
+Mode
+	A value for a MODE argument does not name a defined MODE.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+5. Protocol Types
+
+RRCONFIGSTATUS { Success
+		 InvalidConfigTime
+		 InvalidTime
+		 Failed }
+
+	A value of type RRCONFIGSTATUS returned when manipulating the output
+	configuration or querying information from the server that has some
+	time-dependency.
+
+	InvalidConfigTime indicates that the supplied configuration
+	timestamp does not match the current X server configuration
+	timestamp. Usually this means that the output configuration has
+	changed since the timestamp was received by the application.
+
+	InvalidTime indicates that the supplied output reconfiguration time
+	is earlier than the most recent output reconfiguration request.
+	Generally this indicates that another application has reconfigured
+	the output using a later timestamp.
+
+	Failed is returned whenever the operation is unsuccessful for some
+	other reason. This generally indicates that the requested output
+	configuration is unsupported by the hardware. The goal is to make
+	these limitations expressed by the protocol, but when that isn't
+	possible it is correct to return this error value. If, as a
+	implentor, you find this error code required, please submit the
+	hardware constraints that exist so that a future version of the
+	extension can correctly capture the configuration constraints in
+	your system.
+
+ROTATION { Rotate_0
+	   Rotate_90
+	   Rotate_180
+	   Rotate_270
+	   Reflect_X
+	   Reflect_Y }
+
+	These values are used both to indicate a set of allowed rotations
+	and reflections as well as to indicate a specific rotation and
+	reflection combination.
+
+RRSELECTMASK { RRScreenChangeNotifyMask
+	       RRCrtcChangeNotifyMask (New in version 1.2)
+	       RROutputChangeNotifyMask (New in version 1.2)
+	       RROutputPropertyNotifyMask (New in version 1.2) }
+
+SIZEID { CARD16 }
+
+MODE { XID or None }
+
+CRTC { XID }
+
+OUTPUT { XID }
+
+CONNECTION { Connected, Disconnected, UnknownConnection }
+
+	This value provides an indication of whether an output is actually
+	connected to a monitor or other presentation device.
+
+SUBPIXELORDER { SubPixelUnknown		The subpixel order uses the Render
+		SubPixelHorizontalRGB	extensions definitions; they are here
+		SubPixelHorizontalBGR	only for convenience.
+		SubPixelVerticalRGB
+		SubPixelVerticalBGR
+		SubPixelNone }
+
+SCREENSIZE { widthInPixels, heightInPixels: CARD16
+	     widthInMillimeters, heightInMillimeters: CARD16 }
+
+MODEFLAG { HSyncPositive
+	   HSyncNegative
+	   VSyncPositive
+	   VSyncNegative
+	   Interlace
+	   DoubleScan
+	   CSync
+	   CSyncPositive
+	   CSyncNegative
+	   HSkewPresent
+	   BCast
+	   PixelMultiplex
+	   DoubleClock
+	   ClockDivideBy2 }
+
+MODEINFO { id: MODE
+	   name: STRING
+	   width, height: CARD16
+	   dotClock: CARD32
+	   hSyncStart, hSyncEnd, hTotal, hSkew: CARD16
+	   vSyncStart, vSyncEnd, vTotal: CARD16
+	   modeFlags: SETofMODEFLAG }
+
+REFRESH { rates: LISTofCARD16 }
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+5.4. Protocol Types added in version 1.4 of the extension
+
+SCANOUTPIXMAPINFO { format: PICTFORMAT
+		    maxWidth, maxHeight: CARD16
+		    rotations: SETofROTATION }
+
+	'format' is the format of the pixels within the scanout
+	pixmap. Only 'Direct' formats are supported, this will never
+	be an 'Indexed' format.
+
+	'maxWidth' and 'maxHeight' define the largest supported
+	scanout pixmap. There is no minimum size; scanout pixmaps down
+	to 1x1 may be created.
+
+	'rotations' lists the set of rotations which can be provided
+	without additional latency or memory usage within the
+	environment. This typically means that they are supported
+	directly by the hardware. It is expected that a compositing
+	manager will perform other transforms as a part of the
+	compositing process in conjunction with the sprite transforms
+	described in this extension.
+
+SCREENFLAG { SetScreenPixmapSize
+             SetScreenSize
+	     SetScreenSizeInMillimeters
+	     SetScreenCrtcs }
+
+CRTCFLAG { SetCrtcPosition
+	   SetCrtcMode
+	   SetCrtcRotation
+	   SetCrtcOutputs
+	   SetCrtcSpritePositionTransform
+	   SetCrtcSpriteImageTransform
+	   SetCrtcPixmap
+	   SetCrtcPixmapPosition }
+
+CRTCCONFIG { crtc: CRTC
+	     set: SETofCRTCFLAG
+	     x, y: INT16
+	     mode: MODE
+	     rotation: ROTATION
+	     sprite-position-transform: TRANSFORM
+	     sprite-image-transform: TRANSFORM
+	     outputs: LISTofOUTPUT
+	     pixmap: PIXMAP or None
+	     pixmap-x, pixmap-y: INT16 }
+
+	If 'set' includes SetCrtcSpritePositionTransform, then
+	sprite-position-transform is used as in the
+	RRSetCrtcSpriteTransform request position-transform parameter.
+
+	If 'set' includes SetCrtcSpriteImageTransform, then
+	sprite-image-transform is used as in the
+	RRSetCrtcSpriteTransform request image-transform parameter.
+
+	If 'set' includes SetCrtcPixmap, then 'pixmap' specifies the
+	origin of the pixel data to be presented on 'crtc'. If
+	'pixmap' is None, then data will be presented from the screen
+	pixmap.
+
+	If 'set' includes SetCrtcPixmapPosition, then 'pixmap-x' and
+	'pixmap-y' specify the origin of the scanout data within the
+	pixmap, the area from that location to pixmap-x +
+	width-of(mode), pixmap-y + height-of(mode) is what will be
+	seen on the connected outputs.
+
+	If 'set' includes SetCrtcPixmap, then 'pixmap' must specify a
+	scanout pixmap as created by RRCreateScanoutPixmap or
+	None. Otherwise a Match error results. Furthermore: 
+
+	 * 'pixmap' must be at least as large as the area to be
+	   scanned out, or a Match error results.
+
+	 * If 'pixmap' is destroyed while still being used as a
+	   scanout pixmap, then the associated CRTC will have its
+	   scanout pixmap set back to None, the CRTC origin set back
+	   to 0,0 (to make sure it fits) and the screen pixmap width
+	   and height increased to be at least as big as the current
+	   CRTC mode.
+
+	 * Future crtc changes that do not change the scanout pixmap
+	   will cause an existing scanout pixmap to be resized to be
+	   large enough to hold the new mode at the then-current
+	   pixmap-x/pixmap-y location.
+
+	If 'set' includes SetCrtcRotation then:
+
+	 * Any new or existing scanout pixmap must have had the
+	   specified 'rotation' included as a part of its creation
+	   parameters, or a Match error results.
+
+	 * If no scanout pixmap is in use, then the crtc must support
+	   'rotation' else a Value error results.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+6. Extension Initialization
+
+The name of this extension is "RANDR".
+
+┌───
+    RRQueryVersion
+	client-major-version:	CARD32
+	client-minor-version:	CARD32
+      ▶
+	major-version:		CARD32
+	minor-version:		CARD32
+└───
+
+	The client sends the highest supported version to the server
+	and the server sends the highest version it supports, but no
+	higher than the requested version. Major versions changes can
+	introduce incompatibilities in existing functionality, minor
+	version changes introduce only backward compatible changes.
+	It is the clients responsibility to ensure that the server
+	supports a version which is compatible with its expectations.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+7. Extension Requests
+
+┌───
+    RRSelectInput
+	window: WINDOW
+	enable: SETofRRSELECTMASK
+└───
+	Errors: Window, Value
+
+	If 'enable' is RRScreenChangeNotifyMask, RRScreenChangeNotify events
+	will be sent when the screen configuration changes, either from
+	this protocol extension, or due to detected external screen
+	configuration changes. RRScreenChangeNotify may also be sent when
+	this request executes if the screen configuration has changed since
+	the client connected, to avoid race conditions.
+
+	New for version 1.2:
+
+	If 'enable' contains RRCrtcChangeMask, RRCrtcChangeNotify events
+	will be sent when a the configuration for a CRTC associated with the
+	screen changes, either through this protocol extension or due to
+	detected external changes. RRCrtcChangeNotify may also be sent when
+	this request executes if the CRTC configuration has changed since
+	the client connected, to avoid race conditions.
+
+	If 'enable' contains RROutputChangeMask, RROutputChangeNotify events
+	will be sent when a the configuration for an output associated with
+	the screen changes, either through this protocol extension or due to
+	detected external changes. RROutputChangeNotify may also be sent
+	when this request executes if the output configuration has changed
+	since the client connected, to avoid race conditions.
+
+	If 'enable' contains RROutputPropertyNotifyMask,
+	RROutputPropertyNotify events will be sent when properties change on
+	this output.
+
+┌───
+    RRSetScreenConfig
+	window: WINDOW
+	timestamp: TIMESTAMP
+	config-timestamp: TIMESTAMP
+	size-id: SIZEID
+	rotation: ROTATION
+	rate: CARD16
+      ▶
+	status: RRCONFIGSTATUS
+	new-timestamp: TIMESTAMP
+	config-timestamp: TIMESTAMP
+	root: WINDOW
+	subpixelOrder: SUBPIXELORDER
+└───
+	Errors: Value, Match
+
+	If 'timestamp' is less than the time when the configuration was last
+	successfully set, the request is ignored and InvalidTime returned in
+	status.
+
+	If 'config-timestamp' is not equal to when the server's screen
+	configurations last changed, the request is ignored and
+	InvalidConfigTime returned in status. This could occur if the
+	screen changed since you last made a RRGetScreenInfo request,
+	perhaps by a different piece of display hardware being installed.
+	Rather than allowing an incorrect call to be executed based on stale
+	data, the server will ignore the request.
+
+	'rate' contains the desired refresh rate. If it is zero, the server
+	selects an appropriate rate.
+
+	This request may fail for other indeterminate reasons, in which case
+	'status' will be set to Failed and no configuration change will be
+	made.
+
+	This request sets the screen to the specified size, rate, rotation
+	and reflection.
+
+	When this request succeeds, 'status' contains Success and the
+	requested changes to configuration will have been made.
+
+	'new-time-stamp' contains the time at which this request was
+	executed.
+
+	'config-timestamp' contains the time when the possible screen
+	configurations were last changed.
+
+	'root' contains the root window for the screen indicated by the
+	window.
+
+	'subpixelOrder' contains the resulting subpixel order of the screen
+	to allow correct subpixel rendering.
+
+	Value errors are generated when 'rotation', 'rate' or 'size-id'
+	are invalid.
+
+┌───
+    RRGetScreenInfo
+	window: WINDOW
+      ▶
+	rotations: SETofROTATION
+	root: WINDOW
+	timestamp: TIMESTAMP
+	config-timestamp: TIMESTAMP
+	size-id: SIZEID
+	rotation: ROTATION
+	rate: CARD16
+	sizes: LISTofSCREENSIZE
+	refresh: LISTofREFRESH
+└───
+
+	Errors: Window
+
+	RRGetScreenInfo returns information about the current and available
+	configurations for the screen associated with 'window'.
+
+	'rotations' contains the set of rotations and reflections supported
+	by the screen.
+
+	'root' is the root window of the screen.
+
+	'config-timestamp' indicates when the screen configuration
+	information last changed: requests to set the screen will fail
+	unless the timestamp indicates that the information the client
+	is using is up to date, to ensure clients can be well behaved
+	in the face of race conditions.
+
+	'timestamp' indicates when the configuration was last set.
+
+	'size-id' indicates which size is active.
+
+	'rate' is the current refresh rate. This is zero when the refresh
+	rate is unknown or on devices for which refresh is not relevant.
+
+	'sizes' is the list of possible frame buffer sizes (at the normal
+	orientation. Each size indicates both the linear physical size of
+	the screen and the pixel size.
+
+	'refresh' is the list of refresh rates for each size. Each element
+	of 'sizes' has a corresponding element in 'refresh'. An empty list
+	indicates no known rates, or a device for which refresh is not
+	relevant.
+
+	The default size of the screen (the size that would become the
+	current size when the server resets) is the first size in the
+	list.
+
+7.1. Extension Requests added in version 1.2 of the extension
+
+As introduced above, version 1.2 of the extension splits the screen size
+from the crtc and output configuration, permitting the subset of the screen
+presented by multiple outputs to be configured. As a separate notion, the
+size of the screen itself may be arbitrarily configured within a defined
+range. As crtcs and outputs are added and removed from the system, the set
+returned by the extension will change so that applications can detect
+dynamic changes in the display environment.
+
+┌───
+    RRGetScreenSizeRange
+	window: WINDOW
+      ▶
+	CARD16	minWidth, minHeight
+	CARD16	maxWidth, maxHeight
+└───
+	Errors: Window
+
+	Returns the range of possible screen sizes. The screen may be set to
+	any size within this range.
+
+┌───
+    RRSetScreenSize
+	window: WINDOW
+	width: CARD16
+	height: CARD16
+	width-in-millimeters: CARD32
+	height-in-millimeters: CARD32
+└───
+	Errors: Window, Match, Value
+
+	Sets the screen to the specified size. 'width' and 'height' must be
+	within the range allowed by GetScreenSizeRanges, otherwise a Value
+	error results. All active monitors must be configured to display a
+	subset of the specified size, else a Match error results.
+
+	'width-in-millimeters' and 'height-in-millimeters' can be set to
+	reflect the physical size of the screen reported both through this
+	extension and the core protocol. They must be non-zero, or Value
+	error results.
+
+	If panning is enabled, the width and height of the panning and the
+	tracking areas are adapted to the new size and clamped afterwards.
+	Disabled panning axes remain disabled.
+	Panning borders are disabled if their requirements are no longer met
+	(see RRSetPanning).
+
+┌───
+    RRGetScreenResources
+	window: WINDOW
+      ▶
+	timestamp: TIMESTAMP
+	config-timestamp: TIMESTAMP
+	crtcs: LISTofCRTC
+	outputs: LISTofOUTPUT
+	modes: LISTofMODEINFO
+└───
+	Errors: Window
+
+	RRGetScreenResources returns the list of outputs and crtcs connected
+	to the screen associated with 'window'.
+
+	'timestamp' indicates when the configuration was last set.
+
+	'config-timestamp' indicates when the configuration information last
+	changed. Requests to configure the output will fail unless the
+	timestamp indicates that the information the client is using is up
+	to date, to ensure clients can be well behaved in the face of race
+	conditions.
+
+	'crtcs' contains the list of CRTCs associated with the screen.
+
+	'outputs' contains the list of outputs associated with the screen.
+
+	'modes' contains the list of modes associated with the screen
+
+	This request explicitly asks the server to ensure that the
+	configuration data is up-to-date wrt the hardware. If that requires
+	polling, this is when such polling would take place.  If the
+	current configuration is all that's required, use
+	RRGetScreenResourcesCurrent instead.
+
+┌───
+    RRGetOutputInfo
+	output: OUTPUT
+	config-timestamp: TIMESTAMP
+      ▶
+	status: RRCONFIGSTATUS
+	timestamp: TIMESTAMP
+	crtc: CRTC
+
+	name: STRING
+	connection: CONNECTION
+	subpixel-order: SUBPIXELORDER
+	widthInMillimeters, heightInMillimeters: CARD32
+	crtcs: LISTofCRTC
+	clones: LISTofOUTPUT
+	modes: LISTofMODE
+	num-preferred: CARD16
+└───
+	Errors: Output
+
+	RRGetOutputInfo returns information about the current and available
+	configurations 'output'.
+
+	If 'config-timestamp' does not match the current configuration
+	timestamp (as returned by RRGetScreenResources), 'status' is set to
+	InvalidConfigTime and the remaining reply data is empty. Otherwise,
+	'status' is set to Success.
+
+	'timestamp' indicates when the configuration was last set.
+
+	'crtc' is the current source CRTC for video data, or Disabled if the
+	output is not connected to any CRTC.
+
+	'name' is a UTF-8 encoded string designed to be presented to the
+	user to indicate which output this is. E.g. "S-Video" or "DVI".
+
+	'connection' indicates whether the hardware was able to detect a
+	device connected to this output. If the hardware cannot determine
+	whether something is connected, it will set this to
+	UnknownConnection.
+
+	'subpixel-order' contains the resulting subpixel order of the
+	connected device to allow correct subpixel rendering.
+
+	'widthInMillimeters' and 'heightInMillimeters' report the physical
+	size of the displayed area. If unknown, or not really fixed (e.g.,
+	for a projector), these	values are both zero.
+
+	'crtcs' is the list of CRTCs that this output may be connected to.
+	Attempting to connect this output to a different CRTC results in a
+	Match error.
+
+	'clones' is the list of outputs which may be simultaneously
+	connected to the same CRTC along with this output. Attempting to
+	connect this output with an output not in the 'clones' list
+	results in a Match error.
+
+	'modes' is the list of modes supported by this output. Attempting to
+	connect this output to a CRTC not using one of these modes results
+	in a Match error.
+
+	The first 'num-preferred' modes in 'modes' are preferred by the
+	monitor in some way; for fixed-pixel devices, this would generally
+	indicate which modes match the resolution of the output device.
+
+┌───
+    RRListOutputProperties
+	output:OUTPUT
+      ▶
+	atoms: LISTof ATOM
+└───
+	Errors: Output
+
+	This request returns the atoms of properties currently defined on
+	the output.
+
+┌───
+    RRQueryOutputProperty
+	output: OUTPUT
+	property: ATOM
+      ▶
+	pending: BOOL
+	range: BOOL
+	immutable: BOOL
+	valid-values: LISTofINT32
+└───
+	Errors: Name, Atom, Output
+
+	If the specified property does not exist for the specified output,
+	then a Name error is returned.
+
+	If 'pending' is TRUE, changes made to property values with
+	RRChangeOutputProperty will be saved in the pending property value
+	and be automatically copied to the current value on the next
+	RRSetCrtcConfig request involving the named output. If 'pending' is
+	FALSE, changes are copied immediately.
+
+	If 'range' is TRUE, then the valid-values list will contain
+	precisely two values indicating the minimum and maximum allowed
+	values. If 'range' is FALSE, then the valid-values list will contain
+	the list of possible values; attempts to set other values will
+	result in a Value error.
+
+	If 'immutable' is TRUE, then the property configuration cannot be
+	changed by clients. Immutable properties are interpreted by the X
+	server.
+
+┌───
+    RRConfigureOutputProperty
+	output: OUTPUT
+	property: ATOM
+	pending: BOOL
+	range: BOOL
+	valid-values: LISTofINT32
+└───
+	Errors: Access, Name, Atom, Output
+
+	If the specified property is 'immutable', an Access error is
+	returned.
+
+	Otherwise, the configuration of the specified property is changed to
+	the values provided in this request.
+
+	If the specified property does not exist for the specified output,
+	it is created with an empty value and None type.
+
+┌───
+    RRChangeOutputProperty
+	output: OUTPUT
+	property, type: ATOM
+	format: {8, 16, 32}
+	mode: { Replace, Prepend, Append }
+	data: LISTofINT8 or LISTofINT16 or LISTofINT32
+└───
+	Errors: Alloc, Atom, Match, Value, Output
+
+	This request alters the value of the property for the specified
+	output. If the property is marked as a 'pending' property, only the
+	pending value of the property is changed. Otherwise, changes are
+	reflected in both the pending and current values of the property.
+	The type is uninterpreted by the server.  The format specifies
+	whether the data should be viewed as a list of 8-bit, 16-bit, or
+	32-bit quantities so that the server can correctly byte-swap as
+	necessary.
+
+	If the mode is Replace, the previous property value is discarded.
+	If the mode is Prepend or Append, then the type and format must
+	match the existing property value (or a Match error results).  If
+	the property is undefined, it is treated as defined with the correct
+	type and format with zero-length data.
+
+	For Prepend, the data is tacked on to the beginning of the existing
+	data, and for Append, it is tacked on to the end of the existing data.
+
+	This request generates a OutputPropertyNotify
+
+	The lifetime of a property is not tied to the storing client.
+	Properties remain until explicitly deleted, until the output is
+	destroyed, or until server reset (see section 10).
+
+	The maximum size of a property is server-dependent and may vary
+	dynamically.
+
+┌───
+    RRDeleteOutputProperty
+	output: OUTPUT
+	property: ATOM
+└───
+	Errors: Atom, Output
+
+	This request deletes the property from the specified window if the
+	property exists and generates a OutputPropertyNotify event unless
+	the property does not exist.
+
+┌───
+    RRGetOutputProperty
+	output: OUTPUT
+	property: ATOM
+	type: ATOM or AnyPropertyType
+	long-offset, long-length: CARD32
+	delete: BOOL
+	pending: BOOL
+      ▶
+	type: ATOM or None
+	format: {0, 8, 16, 32}
+	bytes-after: CARD32
+	value: LISTofINT8 or LISTofINT16 or LISTofINT32
+└───
+	Errors: Atom, Value, Output
+
+	If the specified property does not exist for the specified output,
+	then the return type is None, the format and bytes-after are zero,
+	and the value is empty.  The delete argument is ignored in this
+	case.
+
+	If the specified property exists but its type does not match the
+	specified type, then the return type is the actual type of the
+	property, the format is the actual format of the property (never
+	zero), the bytes-after is the length of the property in bytes (even
+	if the format is 16 or 32), and the value is empty.  The delete
+	argument is ignored in this case.
+
+	If the specified property exists and either AnyPropertyType is
+	specified or the specified type matches the actual type of the
+	property, then the return type is the actual type of the property,
+	the format is the actual format of the property (never zero), and
+	the bytes-after and value are as follows, given:
+
+		N = actual length of the stored property in bytes
+				  (even if the format is 16 or 32)
+		I = 4 × offset
+		T = N - I
+		L = MINIMUM(T, 4 × long-length)
+		A = N - (I + L)
+
+	If 'pending' is true, and if the property holds a pending value,
+	then the value returned will be the pending value of the property
+	rather than the current value.  The returned value starts at byte
+	index I in the property (indexing from 0), and its length in bytes
+	is L.  However, it is a Value error if long-offset is given such
+	that L is negative.  The value of bytes-after is A, giving the
+	number of trailing unread bytes in the stored property.  If delete
+	is True and the bytes-after is zero, the property is also deleted
+	from the output, and a RROutputPropertyNotify event is generated.
+
+┌───
+    RRCreateMode
+	window: WINDOW
+	modeinfo: MODEINFO
+      ▶
+	mode: MODE
+└───
+	Errors: Window, Name, Value
+
+	'modeinfo' provides a new mode for outputs on the screen
+	associated with 'window'. If the name of 'modeinfo' names an
+	existing mode, a Name error is returned.  If some parameter of the
+	mode is not valid in some other way, a Value error is returned.
+
+	The returned 'mode' provides the id for the mode.
+
+┌───
+    RRDestroyMode
+	mode: MODE
+└───
+	Errors: Mode, Access
+
+	The user-defined 'mode' is destroyed. 'mode' must name a mode
+	defined with RRCreateMode, else an Match error is returned.  If
+	'mode' is in use by some CRTC or Output, then an Access error is
+	returned.
+
+┌───
+    RRAddOutputMode
+	output: OUTPUT
+	mode: MODE
+└───
+	Errors: Output, Mode, Match
+
+	'output' indicates which output is to be configured.
+
+	'mode' specifies which mode to add. If 'mode' is not valid for
+	'output', then a Match error is generated.
+
+	This request generates OutputChangeNotify events.
+
+┌───
+    RRDeleteOutputMode
+	output: OUTPUT
+	mode: MODE
+└───
+	Errors: Output, Mode
+
+	'output' indicates which output is to be configured.
+
+	'mode' specifies which mode to delete. 'mode' must have been added
+	with RRAddOutputMode, else an Access error is returned. 'mode' must
+	not be active, else a Match error is returned.
+
+	This request generates OutputChangeNotify events.
+
+┌───
+    RRGetCrtcInfo
+	crtc: CRTC
+	config-timestamp: TIMESTAMP
+      ▶
+	status: RRCONFIGSTATUS
+	timestamp: TIMESTAMP
+	x, y: INT16
+	width, height: CARD16
+	mode: MODE
+	rotation: ROTATION
+	outputs: LISTofOUTPUT
+
+	rotations: SETofROTATION
+	possible-outputs: LISTofOUTPUT
+└───
+
+	Errors: Window
+
+	RRGetCrtcModes returns information about the current and available
+	configurations for the specified crtc connected to the screen
+	associated with 'window'.
+
+	If 'config-timestamp' does not match the current configuration
+	timestamp (as returned by RRGetScreenResources), 'status' is set to
+	InvalidConfigTime and the remaining reply data is empty. Otherwise,
+	'status' is set to Success.
+
+	'timestamp' indicates when the configuration was last set.
+
+	'x' and 'y' indicate the position of this CRTC within the screen
+	region. They will be set to 0 when the CRTC is disabled.
+
+	'width' and 'height' indicate the size of the area within the screen
+	presented by this CRTC. This may be different than the size of the
+	mode due to rotation. They will be set to 0 when the CRTC
+	is disabled.
+
+	'mode' indicates which mode is active, or None indicating that the
+	CRTC has been disabled and is not displaying the screen contents.
+
+	'rotation' indicates the active rotation. It is set to Rotate_0
+	when the CRTC is disabled.
+
+	'outputs' is the list of outputs currently connected to this CRTC
+	and is empty when the CRTC is disabled.
+
+	'rotations' contains the set of rotations and reflections supported
+	by the CRTC.
+
+	'possible-outputs' lists all of the outputs which may be connected
+	to this CRTC.
+
+┌───
+    RRSetCrtcConfig
+	crtc: CRTC
+	timestamp: TIMESTAMP
+	config-timestamp: TIMESTAMP
+	x, y: INT16
+	mode: MODE
+	rotation: ROTATION
+	outputs: LISTofOUTPUT
+      ▶
+	status: RRCONFIGSTATUS
+	new-timestamp: TIMESTAMP
+└───
+	Errors: Value, Match
+
+	If 'timestamp' is less than the time when the configuration was last
+	successfully set, the request is ignored and InvalidTime returned in
+	status.
+
+	If 'config-timestamp' is not equal to when the monitor's
+	configuration last changed, the request is ignored and
+	InvalidConfigTime returned in status. This could occur if the
+	monitor changed since you last made a RRGetScreenInfo request,
+	perhaps by a different monitor being connected to the machine.
+	Rather than allowing an incorrect call to be executed based on stale
+	data, the server will ignore the request.
+
+	'x' and 'y' contain the desired location within the screen for this
+	monitor's content. 'x' and 'y' must be within the screen size, else
+	a Value error results.
+
+	'mode' is either the desired mode or None indicating the CRTC should
+	be disabled. If 'mode' is not one of these values, a Value
+	error results. 'mode' must be valid for all of the configured outputs,
+	else a Match error.
+
+	'rotation' contains the desired rotation along with which
+	reflections should be enabled. The rotation and reflection values
+	must be among those allowed for this monitor, else a Value error
+	results.
+
+	'outputs' contains the set of outputs that this CRTC should be
+	connected to. The set must be among the list of acceptable output
+	sets for this CRTC or a Match error results.
+
+	If 'mode' is None, then 'outputs' must be empty, else a Match error
+	results. Conversely, if 'mode' is not None, then 'outputs' must not be
+	empty, else a Match error results.
+
+	This request may fail for other indeterminate reasons, in which case
+	'status' will be set to Failed and no configuration change will be
+	made.
+
+	This request sets the CRTC to the specified position, mode, rotation
+	and reflection. The entire area of the CRTC must fit within the
+	screen size, else a Match error results. As an example, rotating the
+	screen so that a single CRTC fills the entire screen before and
+	after may necessitate disabling the CRTC, resizing the screen,
+	then re-enabling the CRTC at the new configuration to avoid an
+	invalid intermediate configuration.
+
+	If panning is enabled, the width and height of the panning and the
+	tracking areas are clamped to the new mode size.
+	Disabled panning axes remain disabled.
+	Panning borders are disabled if their requirements are no longer met
+	(see RRSetPanning).
+
+	When this request succeeds, 'status' contains Success and the
+	requested changes to configuration will have been made.
+
+	'new-time-stamp' contains the time at which this request was
+	executed.
+
+┌───
+    RRGetCrtcGammaSize
+	crtc: CRTC
+      ▶
+	size: CARD16
+└───
+	Errors: Crtc
+
+	This request returns the size of the gamma ramps used by 'crtc'.
+
+┌───
+    RRGetCrtcGamma
+	crtc: CRTC
+      ▶
+	red: LISTofCARD16
+	green: LISTofCARD16
+	blue: LISTofCARD16
+└───
+	Errors: Crtc
+
+	This request returns the currently set gamma ramps for 'crtc'.  All
+	three lists will be the size returned by the RRGetCrtcGammaSize
+	request.
+
+┌───
+    RRSetCrtcGamma
+	crtc: CRTC
+	red: LISTofCARD16
+	green: LISTofCARD16
+	blue: LISTofCARD16
+└───
+	Errors: Crtc, Match
+
+	This request sets the gamma ramps for 'crtc'. All three lists
+	must be the size returned by RRGetCrtcGammaSize else a Value error
+	results.
+
+7.2. Extension Requests added in version 1.3 of the extension
+
+┌───
+    RRGetScreenResourcesCurrent
+	window: WINDOW
+      ▶
+	timestamp: TIMESTAMP
+	config-timestamp: TIMESTAMP
+	crtcs: LISTofCRTC
+	outputs: LISTofOUTPUT
+	modes: LISTofMODEINFO
+└───
+	Errors: Window
+
+	RRGetScreenResourcesCurrent returns the list of outputs and crtcs
+	connected to the screen associated with 'window'.
+
+	'timestamp' indicates when the configuration was last set.
+
+	'config-timestamp' indicates when the configuration information last
+	changed. Requests to configure the output will fail unless the
+	timestamp indicates that the information the client is using is up
+	to date, to ensure clients can be well behaved in the face of race
+	conditions.
+
+	'crtcs' contains the list of CRTCs associated with the screen.
+
+	'outputs' contains the list of outputs associated with the screen.
+
+	'modes' contains the list of modes associated with the screen.
+
+	Unlike RRGetScreenResources, this merely returns the current
+	configuration, and does not poll for hardware changes.
+
+┌───
+    RRSetCrtcTransform
+	crtc: CRTC
+	transform: TRANSFORM
+	filter: STRING8
+	values: LISTofFIXED
+└───
+	Errors: Crtc, Match
+
+	This request provides a mechanism that is more general than the
+	existing rotation and reflection values for describing the
+	transformation from frame buffer image to crtc presentation.
+	'transform' is a full 2D projective transformation from screen
+	coordinate space to crtc coordinate space. This transformation is
+	applied before the rotation and reflection values to compute the
+	complete transform.
+
+	'filter' and 'values' specify a Render filter that may be used by the
+	server when transforming data from frame buffer to crtc.
+
+	This request sets the transform to be used at the next
+	RRSetCrtcConfig request execution; it does not cause any change to
+	occur in the current configuration.
+
+	When a non-identity transformation is in use, the rectangle returned
+	by RRGetCrtcInfo defines the bounding rectangle of the screen that is
+	projected to the crtc. It is this projected rectangle which must be
+	within the area of the screen when the mode is set.
+
+┌───
+    RRGetCrtcTransform
+	crtc: CRTC
+      ▶
+	pending-transform: TRANSFORM
+	pending-filter: STRING8
+	pending-values: LISTofFIXED
+	current-transform: TRANSFORM
+	current-filter: STRING8
+	current-values: LISTofFIXED
+└───
+
+	This request returns the pending and current transforms for the
+	specified CRTC. The pending transform will be the same as the current
+	transform if no new pending transform has been set since the last call
+	to RRSetCrtcConfig.
+
+┌───
+    RRGetPanning
+	crtc: CRTC
+      ▶
+	status: RRCONFIGSTATUS
+	timestamp: TIMESTAMP
+	left, top, width, height: CARD16
+	track_left, track_top, track_width, track_height: CARD16
+	border_left, border_top, border_right, border_bottom: INT16
+└───
+
+	Errors: Crtc
+
+	Version 1.3 adds panning support again. If multiple crtcs are active
+	the panning behavior can be defined per crtc individually.
+	RRGetPanning returns information about the currently set panning
+	configuration for the specified crtc.  If the CRTC does not support
+	panning, all fields (except timestamp) will be 0.
+
+	'timestamp' indicates when the configuration was last set.
+
+	All other entries are explained for RRSetPanning.
+
+┌───
+    RRSetPanning
+	crtc: CRTC
+	timestamp: TIMESTAMP
+	left, top, width, height: CARD16
+	track_left, track_top, track_width, track_height: CARD16
+	border_left, border_top, border_right, border_bottom: INT16
+      ▶
+	status: RRCONFIGSTATUS
+	new-timestamp: TIMESTAMP
+└───
+	Errors: Crtc, Match
+
+	This request sets the panning parameters.  As soon as panning is
+	enabled, the CRTC position can change with every pointer move.
+	RRCrtcChangeNotify events are sent to the clients requesting those.
+
+	If 'timestamp' is less than the time when the configuration was last
+	successfully set, the request is ignored and InvalidTime returned in
+	status.
+
+	┌──┳━━━━━━━━━━━━━━┳─────┬ ─ ─ ─ ─ ─ ┐
+	│  ┃     CRTC     ┃     │
+	│  ┃              ┃     │           │
+	│  ┃             X┃→    │
+	│  ┃              ┃     │           │  framebuffer
+	│  ┗━━━━━━━━━━━━━━┛     │
+	│                       │           │
+	│panning area           │
+	└───────────────────────┴ ─ ─ ─ ─ ─ ┘
+
+	'left', 'top', 'width', and 'height' contain the total panning area
+	for this CRTC.  'width' has to be larger than or equal to the CRTC's
+	width or 0, and 'left'+'width' must be within the screen size, else a
+	Match error results.  Equivalent restrictions for the height exist.
+	'width' or 'height' set to 0 indicate that panning should be disabled
+	on the according axis.  Setting 'width'/'height' to the CRTC's
+	width/height will disable panning on the X/Y axis as well, but
+	RRSetScreenSize will silently enable panning if the screen size is
+	increased. This does not happen if set to 0.
+
+	┌────────┳━━━━━━━━━━━━━━┳ ─ ─ ─ ─ ─ ┐
+	│        ┃     CRTC     ┃
+	│        ┃              ┃           │
+	│        ┃              ┃
+	│        ┃              ┃           │  tracking area
+	│        ┗━━━━━━━━━━━━━━┫     X
+	│               ↓       │     ↓     │
+	│panning area           │
+	└───────────────────────┴ ─ ─ ─ ─ ─ ┘
+
+	'track_left', 'track_top', 'track_width', and 'track_height' contain
+	the pointer area for which the panning region is updated.  For normal
+	use cases it should enclose the panning area minus borders, and is
+	typically set to either the panning area minus borders, or to the
+	total screen size. If set to the total screen size, the CRTC will pan
+	in the remaining axis even if the pointer is outside the panning area
+	on a different CRTC, as shown in the figure above. If the pointer is
+	outside the tracking area, the CRTC will not pan. Zero can be used as
+	an alias for the total screen size.
+
+	┌──┳━━━━━━━━━━━━━━┳────────────┐
+	│  ┃     CRTC     ┃            │
+	│  ┃              ┃            │
+	│  ┃              ┃→           │
+	│  ┃           X←→┃            │
+	│  ┃       border_right        │
+	│  ┗━━━━━━━━━━━━━━┛            │
+	│                              │
+	│panning area                  │
+	└──────────────────────────────┘
+
+	'border_left', 'border_top', 'border_right', and 'border_bottom'
+	define the distances from the CRTC borders that will activate panning
+	if the pointer hits them.  If the borders are 0, the screen will pan
+	when the pointer hits the CRTC borders (behavior of pre-RandR Xserver
+	panning).  If the borders are positive, the screen will pan when the
+	pointer gets close to the CRTC borders, if they are negative, the
+	screen will only pan when the pointer is already way past the CRTC
+	borders.  Negative values might confuse users and disable panning to
+	the very edges of the screen.  Thus they are discouraged.
+	border_left + border_right has to be lower or equal than the CRTC's
+	width, else a Match error results.  An equivalent restriction for the
+	height exists.
+
+	Screen size changes update the panning and the tracking areas to the
+	new size. Both screen size changes and mode changes clamp these areas
+	to the current CRTC size.  In these cases panning borders are disabled
+	if their requirements are no longer met.
+
+	When this request succeeds, 'status' contains Success and the
+	requested changes to configuration will have been made.
+
+	'new-time-stamp' contains the time at which this request was
+	executed.
+
+┌───
+    RRSetOutputPrimary
+	window: WINDOW
+	output: OUTPUT
+└───
+	Errors: Match, Output, Window
+
+	RRSetOutputPrimary marks 'output' as the primary output for the
+	screen with the same root window as 'window'. This output's CRTC
+	will be sorted to the front of the list in Xinerama and RANDR
+	geometry requests for the benefit of older applications. The
+	default primary output is None, and None is a legal value to pass
+	to RRSetOutputPrimary. This request is expected to be used by
+	desktop environments to mark the screen that should hold the primary
+	menu bar or panel.
+
+	As this changes the logical layout of the screen, ConfigureNotify
+	and RRScreenChangeNotify will be generated on the appropriate root
+	window when the primary output is changed by this call. This request
+	also generates RROutputChangeNotify events on the outputs that gained
+	and lost primary status.
+
+	If an output is disconnected asynchronously (eg. due to recabling),
+	the primary status does not change, but RROutputChangeNotify events
+	will be generated if the hardware is capable of detecting this;
+	clients are expected to reconfigure if appropriate.
+
+	If an output is deleted (eg. due to device hotplug), the server will
+	act as though None was passed to RRSetOutputPrimary, including
+	generating the appropriate events.
+
+┌───
+    RRGetOutputPrimary
+	window: WINDOW
+      ▶
+	output: OUTPUT
+└───
+	Errors: Window
+
+	RRGetOutputPrimary returns the primary output for the screen.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+7.3. Extension Requests added in version 1.4 of the extension.
+
+┌───
+    RRQueryScanoutPixmaps
+	window: WINDOW
+      ▶
+	infos: LISTofSCANOUTPIXMAPINFO
+└───
+	Errors: Window
+
+	This request returns information about the server support for
+	alternate scanout pixmaps. For each pictformat, there is a set
+	of rotations and a maximum supported size. The rotations here
+	are those provided by the scanout hardware itself, not by
+	software emulation.
+
+┌───
+    RRCreateScanoutPixmap
+	pixmap: PIXMAP
+	drawable: DRAWABLE
+	width, height: CARD16
+	format: PICTFORMAT
+	rotations: SETofROTATION
+└───
+	Errors: Drawable, Match, Value
+
+	Creates a pixmap which can subsequently be used as a scanout
+	buffer for the screen associated with 'drawable'. 'rotations'
+	is the set of rotation values which may be used with the
+	resulting scanout buffer when it is associated with a CRTC.
+
+	'format' must be one of the supported scanout formats, or a
+	Match error results.
+
+	'width' and 'height' must be within the supported range for
+	the specified format or a Value error results.
+
+	'rotations' must be a subset of those supported for the
+	specified format or a Match error results.
+
+┌───
+    RRSetCrtcSpriteTransform
+	crtc: CRTC
+	position-transform: TRANSFORM
+	image-transform: TRANSFORM
+└───
+	Sets the sprite transforms for the specified crtc, any sprites
+	presented on this crtc will have their positions transformed
+	by the position-transform matrix. Sprite images displayed on the crtc
+	will be transformed by the image-transform matrix.
+
+┌───
+    RRGetCrtcSpriteTransform
+	crtc: CRTC
+      ▶
+	position-transform: TRANSFORM
+	image-transform: TRANSFORM
+└───
+	Gets the sprite transforms for the specified crtc.
+
+┌───
+    RRSetCrtcConfigs
+	drawable: DRAWABLE
+	set: SETofSCREENFLAG
+	screen-pixmap-width: CARD16
+	screen-pixmap-height: CARD16
+	screen-width: CARD16
+	screen-height: CARD16
+	width-in-millimeters: CARD32
+	height-in-millimeters: CARD32
+	configs: LISTofCRTCCONFIG
+      ▶
+	status: RRCONFIGSTATUS
+└───
+	Errors: Value, Match
+
+	This works much like RRSetScreenSize followed by a sequence of
+	RRSetCrtcConfig, except that the entire configuration can be set
+	in a single operation, either succeeding or failing without
+	any partial execution.
+
+	If 'set' includes 'SetScreenPixmapSize', then
+	'screen-pixmap-width' and 'screen-pixmap-height' specify the
+	new screen pixmap size.
+
+	If 'set' includes 'SetScreenSize', then 'screen-width' and
+	'screen-height' specify the new screen size.
+
+	If 'set' includes 'SetScreenSizeInMillimeters', then
+	'width-in-millimeters' and 'height-in-millimeters' specify
+	the new screen physical size.
+
+	If 'set' includes 'SetScreenCrtcs', then 'configs' includes
+	the list of new CRTC configurations.
+
+	In addition to the pre-1.4 semantics, this request adds the
+	ability to specific a scanout pixmap for each crtc, and
+	integrates the 1.4 sprite transform request as well.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+8. Extension Events
+
+Clients MAY select for ConfigureNotify on the root window to be
+informed of screen changes. This may be advantageous if all your
+client needs to know is the size of the root window, as it avoids
+round trips to set up the extension.
+
+RRScreenChangeNotify is sent if RRSelectInput has requested it
+whenever properties of the screen change, which may be due to external
+factors, such as re-cabling a monitor, etc.
+
+┌───
+    RRScreenChangeNotify
+
+	rotation: ROTATION;		new rotation
+	sequenceNumber: CARD16		low 16 bits of request seq. number
+	timestamp: TIMESTAMP		time screen was changed
+	configTimestamp: TIMESTAMP	time config data was changed
+	root: WINDOW			root window of screen
+	window: WINDOW			window requesting notification
+	size-id: SIZEID			index of new SCREENSIZE
+	subpixelOrder: SUBPIXELORDER	order of subpixels
+	widthInPixels: CARD16		width in pixels of the new SCREENSIZE
+	heightInPixels: CARD16		height in pixels of the new SCREENSIZE
+	widthInMillimeters: CARD16	width in mm of the new SCREENSIZE
+	heightInMillimeters: CARD16	height in mm of the new SCREENSIZE
+└───
+	This event is generated whenever the screen configuration is changed
+	and sent to requesting clients. 'timestamp' indicates when the
+	screen configuration was changed. 'configTimestamp' says when the
+	last time the configuration was changed. 'root' is the root of the
+	screen the change occurred on, 'window' is window selecting for this
+	event. 'size-id' contains the index of the current size.
+
+	This event is sent whenever the screen's configuration changes
+	or if a new screen configuration becomes available that was
+	not available in the past. In this case (config-timestamp in
+	the event not being equal to the config-timestamp returned in
+	the last call to RRGetScreenInfo), the client MUST call
+	RRGetScreenInfo to update its view of possible screen
+	configurations to have a correct view of possible screen
+	organizations.
+
+	Clients which select screen change notification events may be
+	sent an event immediately if the screen configuration was
+	changed between when they connected to the X server and
+	selected for notification. This is to prevent a common race
+	that might occur on log-in, where many applications start up
+	just at the time when a display manager or log in script might
+	be changing the screen size or configuration.
+
+	Note that the sizes in this event reflect the new SCREENSIZE and
+	thus will appear rotated by the 'rotation' parameter from the sizes
+	of the screen itself. In other words, when rotation is 90 or 270,
+	widthInPixels in this event will be the same as the height value
+	from a ConfigureNotify that reflects the same size change. This
+	will probably confuse developers.
+
+8.1 Events added in version 1.2 of the RandR extension
+
+┌───
+    RROutputChangeNotify:
+	timestamp: TIMESTAMP		time screen was reconfigured
+	config-timestamp: TIMESTAMP	time available config data was changed
+	window: WINDOW			window requesting notification
+	output: OUTPUT			output affected by change
+	crtc: CRTC			connected CRTC or None
+	mode: MODE			mode in use on CRTC or None
+	connection: CONNECTION		connection status
+└───
+
+	This event is generated whenever the available output configurations
+	have changed and is sent to requesting clients. 'timestamp'
+	indicates when the crtc configuration was changed by a client.
+	'config-timestamp' says when the last time the available
+	configurations changed. 'root' is the root of the screen the change
+	occurred on, 'window' is window selecting for this event. The
+	precise change can be detected by examining the new state of the
+	system.
+
+┌───
+    RROutputPropertyNotify:
+	window: WINDOW			window requesting notification
+	output: OUTPUT			output affected by change
+	atom: ATOM			affected property
+	time: TIMESTAMP			time property was changed
+	subpixel-order: SUBPIXELORDER	order of subpixels
+	state: { NewValue, Deleted }	new property state
+└───
+
+	This event is reported to clients selecting RROutputPropertyChange
+	on the window and is generated with state NewValue when a property
+	of the window is changed using RRChangeOutputProperty even when
+	adding zero-length data and when replacing all or part of a property
+	with identical data.  It is generated with state Deleted when a
+	property of the window is deleted using either
+	RRDeleteOutputProperty or RRGetOutputProperty.  The timestamp
+	indicates the server time when the property was changed.
+
+┌───
+    RRCrtcChangeNotify
+	timestamp: TIMESTAMP		time monitor was changed
+	window: WINDOW			window requesting notification
+	crtc: CRTC			CRTC which changed
+	mode: MODE			new mode
+	rotation: ROTATION;		new rotation
+	x: INT16			x position of CRTC within screen
+	y: INT16			y position of CRTC within screen
+	width: CARD16			width of new mode
+	height: CARD16			height of new mode
+└───
+	This event is generated whenever the CRTC configuration is changed
+	and sent to requesting clients. 'timestamp' indicates when the
+	CRTC configuration was changed. 'window' is window selecting for this
+	event. 'mode' is the new mode, or None if the crtc is disabled.
+	'x' and 'y' mark the location in the screen where this CRTC
+	is reading data. 'width' and 'height' indicate the size of the
+	mode. 'x', 'y, 'width' and 'height' are all zero when 'mode' is None.
+
+	This event is sent whenever the monitor's configuration changes
+	or if a new monitor configuration becomes available that was
+	not available in the past. In this case, the client MUST call
+	RRGetCrtcModes to update its view of possible monitor
+	configurations to have a correct view of possible monitor
+	organizations.
+
+	Clients which select monitor change notification events may be
+	sent an event immediately if the monitor configuration was
+	changed between when they connected to the X server and
+	selected for notification. This is to prevent a common race
+	that might occur on log-in, where many applications start up
+	just at the time when a display manager or log in script might
+	be changing the monitor size or configuration.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+9. Properties
+
+Properties are used for output specific parameters, and for announcing
+static or rarely changing data.  Announced data is typically
+immutable.  Properties are also used for evaluating new parameters
+before adding them to the RandR protocol.
+
+The following properties are hereby declared official, and drivers SHOULD
+prefix driver specific properties with '_', unless they are planned to be
+added to this specification.  List values, that are not declared by the table
+below, and will remain driver specific or are not planned to be added to this
+specification, SHOULD be prefixed with "_" as well in order to avoid name
+space or semantics clashes with future extensions of these values.
+
+Beginning with version 1.3 of the RandR extension, certain properties
+are mandatory and MUST be provided by implementations.  Earlier
+versions of the RandR extension MAY provide these properties as well,
+as long as the semantics are not altered.  Clients SHOULD fall back
+gracefully to lower version functionality, though, if the driver
+doesn't handle a mandatory property correctly.
+
+9.1 Known properties
+
+    "Backlight"			aka RR_PROPERTY_BACKLIGHT
+	Type:			INTEGER
+	Format:			32
+	Num. items:		1
+	Flags:			-
+	Range/List:		0-x (driver specific)
+
+	This property controls the brightness on laptop panels and equivalent
+	displays with a backlight controller. The driver specific maximum
+	value MUST turn the backlight to full brightness, 1 SHOULD turn the
+	backlight to minimum brightness, 0 SHOULD turn the backlight off.
+
+    "CloneList"			aka RR_PROPERTY_CLONE_LIST
+	Type:			ATOM
+	Format:			32
+	Num. items:		2*n
+	Flags:			Immutable
+	Range/List:		0-
+
+	Some combinations of outputs on some cards cannot be served
+	independently from each other, because they are wired up to the same
+	encoder outputs.
+	This property lists all output + signal format pairs that are
+	driven together with this output, and thus can only be programmed in
+	clone mode with the same CRTC.
+	This property MUST be symmetric, but may change with changing signal
+	format. I.e. if the property for DVI-1/VGA specifies VGA-1/VGA to be
+	cloned, VGA-1/VGA has to list DVI-1/VGA as well.
+	Outputs / format pairs listed in this property MUST be included in the
+	CompatibilityList.
+
+    "CompatibilityList"		aka RR_PROPERTY_COMPATIBILITY_LIST
+	Type:			ATOM
+	Format:			32
+	Num items:		2*n
+	Flags:			Immutable
+	Range/List:		0-
+
+	Some combinations of outputs on some cards cannot be served at all,
+	because the according encoder is only capable of driving one output at
+	a time.
+	This property lists all output + signal format pairs that can be
+	driven together with this output. NULL atoms specify any output / any
+	signal format, respectively.
+	This property MUST be symmetric, but may change with changing signal
+	format. I.e. if the property for DVI-1/TMDS specifies VGA-1/VGA to be
+	available, VGA-1/VGA has to list DVI-1/TMDS as well.
+
+    "ConnectorNumber"		aka RR_PROPERTY_CONNECTOR_NUMBER
+	Type:			INTEGER
+	Format:			32
+	Num items:		1
+	Flags:			Immutable, Static
+	Range/List:		0-
+
+	Outputs that route their signal to the same connector MUST
+	have the same connector number. Outputs with the same
+	connector number MUST route their signal to the same
+	connector, except if it is 0, which indicates unknown
+	connectivity. 1 is called the primary connector, 2 the
+	secondary. 3 is typically a TV connector, but that is completely
+	driver / hardware dependent.
+	Outputs with the same connector number SHOULD have the same
+	connector type. Meaning and client behavior for mismatching
+	connector types is undefined at the moment.
+
+    "ConnectorType"		aka RR_PROPERTY_CONNECTOR_TYPE
+	Type:			ATOM
+	Format:			32
+	Num items:		1
+	Flags:			Immutable, Static
+	Range/List:		unknown VGA DVI DVI‐I DVI‐A DVI‐D HDMI Panel
+				TV TV-Composite TV-SVideo TV-Component
+				TV-SCART TV-C4 DisplayPort
+
+	Connector type, as far as known to the driver.
+	Values with dashes (TV‐Composite) describe more specific versions of
+	the base values (TV). The former SHOULD be used if the connector is
+	not capable of producing other signal formats. The later SHOULD be
+	used if the exact connector is unknown, or the connector is a
+	multi‐format connector that is not described otherwise. DVI, for
+	instance, SHOULD be handled like a DVI‐I connector, unless additional
+	information is available to the user agent. PANEL describes
+	laptop‐internal (normally LVDS) displays. TV, TV‐SCART, TV‐Component,
+	and TV‐C4 with signal format VGA are valid combinations and describe
+	RGB TV signals.
+
+    "EDID"			aka RR_PROPERTY_RANDR_EDID
+	Type:			INTEGER
+	Format:			8
+	Num items:		n
+	Flags:			Immutable
+	Range/List:		-
+
+	Raw EDID data from the device attached to the according
+	output. Should include main EDID data and all extension
+	blocks. Previously known as EdidData.
+
+    "SignalFormat"		aka RR_PROPERTY_SIGNAL_FORMAT
+	Type:			ATOM
+	Format:			32
+	Num items:		1
+	Flags:			-
+	Range/List:		unknown VGA TMDS LVDS Composite Composite-PAL
+				Composite-NTSC Composite-SECAM SVideo
+				Component DisplayPort
+
+	Signal format / physical protocol format that is used for the
+	specified output. valid-values lists all possible formats on this
+	output, which SHOULD be a subset of the list above and MUST be static.
+	Values with dashes (Composite-PAL) describe more specific versions of
+	the base values (Composite) and SHOULD be used if known to the driver.
+	A driver MAY change this property of an output if the underlying
+	hardware indicates a protocol change (e.g. TV formats).  Clients are
+	allowed to change the signal format in order to select a different
+	signal format (e.g. Composite etc.) or physical protocol (e.g. VGA or
+	TMDS on DVI-I).
+	Laptop panels SHOULD not be detected with this property, but rather by
+	ConnectorType.
+
+    "SignalProperties"		aka RR_PROPERTY_SIGNAL_FORMAT
+	Type:			ATOM
+	Format:			32
+	Num items:		n
+	Flags:			-
+	Range/List:		For Composite signals:
+				  NTSC NTSC-M NTSC-J NTSC-N NTSC-4.43 NTSC-film
+				  PAL PAL-B PAL-G PAL-H PAL-H PAL-I PAL-M PAL-D
+				  PAL-N PAL-Nc PAL-L PAL-60
+				  SECAM SECAM-L SECAM-B SECAM-G SECAM-D SECAM-K
+				  SECAM-H SECAM-K
+				For TMDS signals:
+				  SingleLink DualLink
+				For DisplayPort signals:
+				  Lane1 Lane2 Lane4 LowSpeed HiSpeed
+
+	Properties of the signal format that is currently used for the
+	specified output. valid-values lists all possible properties on this
+	output, which SHOULD be a subset of the list above. It will change if
+	SignalFormat changes.  Multiple properties are allowed.
+	Values with dashes (PAL-B) describe more specific versions of the base
+	values (PAL) and SHOULD be used if known to the driver.  A driver MAY
+	change this property of an output if the underlying hardware indicates
+	a signal change (e.g. TV formats).  Clients are allowed to change the
+	properties in order to select a different signal subformat.
+
+
+9.2 Properties introduced with version 1.2 of the RandR extension
+
+Property			Immutable	Mandatory since
+────────			─────────	───────────────
+EDID				yes		n/a
+
+EDID is provided by the RandR frontend, thus not driver specific.
+
+
+9.3 Properties introduced with version 1.3 of the RandR extension
+
+Property			Immutable	Mandatory since
+────────			─────────	───────────────
+CloneList			yes		not mandatory
+CompatibilityList		yes		not mandatory
+ConnectorNumber			yes: static	not mandatory
+ConnectorType			yes: static	RandR 1.3
+SignalFormat			no		RandR 1.3
+SignalProperties		no		not mandatory
+
+9.4 Properties introduced with version 1.3.1 of the RandR extension
+
+Property			Immutable	Mandatory since
+────────			─────────	───────────────
+Backlight			no		not mandatory
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+10. Extension Versioning
+
+The RandR extension was developed in parallel with the implementation
+to ensure the feasibility of various portions of the design. As
+portions of the extension are implemented, the version number of the
+extension has changed to reflect the portions of the standard provided.
+This document describes the version 1.2 of the specification, the
+partial implementations have version numbers less than that. Here's a
+list of what each version provided:
+
+	0.0: This prototype implemented resize and rotation in the
+	     TinyX server Used approximately the protocol described in
+	     the Usenix paper. Appeared in the TinyX server in
+	     XFree86 4.2, but not in the XFree86 main server.
+
+	0.1: Added subpixel order, added an event for subpixel order.
+	     This version was never checked in to XFree86 CVS.
+
+	1.0: Implements resize, rotation, and reflection. Implemented
+	     both in the XFree86 main server (size change only at this
+	     date), and fully (size change, rotation, and reflection)
+	     in XFree86's TinyX server.
+
+	1.1: Added refresh rates
+
+	1.2: Separate screens from CRTCs and outputs, switch to full VESA
+	     modes
+
+	1.3: Added cheap version of RRGetScreenResources.  Added CRTC
+	     transformations.  Added panning.  Added primary outputs.
+	     Added standard properties.
+
+Compatibility between 0.0 and 1.0 was *NOT* preserved, and 0.0 clients
+will fail against 1.0 servers. The wire encoding op-codes were
+changed for GetScreenInfo to ensure this failure in a relatively
+graceful way. Version 1.1 servers and clients are cross compatible with
+1.0. Version 1.1 is considered to be stable and we intend upward
+compatibility from this point. Version 1.2 offers an extended model of the
+system with multiple output support. Version 1.3 adds a cheap version of
+GetScreenResources to avoid expensive DDC operations, CRTC transformations,
+panning, and the primary output concept. 1.2 and 1.3 are backward-compatible
+with 1.1.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+11. Relationship with other extensions
+
+Two other extensions have a direct relationship with this extension. This
+section attempts to explain how these three are supposed to work together.
+
+11.1 XFree86-VidModeExtension
+
+XFree86-VidModeExtension changes the configuration of a single monitor
+attached to the screen without changing the configuration of the screen
+itself. It provides the ability to specify new mode lines for the server to
+use along with selecting among existing mode lines. As it uses screen
+numbers instead of window identifiers, it can be used to affect multiple
+monitors in a single-screen Xinerama configuration. However, the association
+between screen numbers and root windows in a multi-Screen environment is not
+defined by the extension. Version 2.0 of this extension added the ability to
+adjust the DAC values in a TrueColor server to modify the brightness curves
+of the display.
+
+All of the utility of this extension is subsumed by RandR version 1.2, RandR
+should be used in preference to XFree86-VidModeExtension where both are
+present.
+
+11.2 Xinerama
+
+Xinerama provides a mechanism for describing the relationship between the
+overall screen display and monitors placed within that area. As such, it
+provides the query functionality of RandR 1.2 without any of the
+configuration functionality. Applications using Xinerama to discover
+monitor geometry can continue to do so, with the caveat that they will not be
+informed of changes when they occur. However, Xinerama configuration data
+will be updated, so applications selecting for RandR notification and
+re-querying the configuration with the Xinerama extension will get updated
+information. It is probably better to view RandR as a superset of Xinerama
+at this point and use it in preference to Xinerama where both are present.
+
+			      ❧❧❧❧❧❧❧❧❧❧❧
+
+Appendix A. Protocol Encoding
+
+Syntactic Conventions
+
+This document uses the same syntactic conventions as the core X
+protocol encoding document.
+
+A.1 Common Types
+
+┌───
+    ROTATION
+	0x0001	Rotate_0
+	0x0002	Rotate_90
+	0x0004	Rotate_180
+	0x0008	Rotate_270
+	0x0010	Reflect_X
+	0x0020	Reflect_Y
+└───
+	Used to encode both sets of possible rotations and individual
+	selected rotations.
+
+┌───
+    RRSELECTMASK
+	0x0001	ScreenChangeNotifyMask
+	0x0002	CrtcChangeNotifyMask		Added in version 1.2
+	0x0004	OutputChangeNotifyMask		Added in version 1.2
+	0x0008	OutputPropertyNotifyMask	Added in version 1.2
+└───
+      Event select mask for RRSelectInput
+
+┌───
+    RRCONFIGSTATUS
+	0x0 Success
+	0x1 InvalidConfigTime
+	0x2 InvalidTime
+	0x3 Failed
+└───
+	Return status for requests which depend on time.
+
+┌───
+    MODEINFO (32)				Added in version 1.2
+	4	CARD32		id
+	2	CARD16		width in pixels
+	2	CARD16		height in pixels
+	4	CARD32		dot clock
+	2	CARD16		h sync start
+	2	CARD16		h sync end
+	2	CARD16		h total
+	2	CARD16		h skew
+	2	CARD16		v sync start
+	2	CARD16		v sync end
+	2	CARD16		v total
+	2	CARD16		name length
+	4	SETofMODEFLAG	mode flags
+└───
+
+	An output mode specifies the complete CRTC timings for
+	a specific mode. The vertical and horizontal synchronization rates
+	can be computed given the dot clock and the h total/v total
+	values. If the dot clock is zero, then all of the timing
+	parameters and flags are not used, and must be zero as this
+	indicates that the timings are unknown or otherwise unused.
+	The name itself will be encoded separately in each usage.
+
+┌───
+    MODEFLAG
+	0x00000001	HSyncPositive
+	0x00000002	HSyncNegative
+	0x00000004	VSyncPositive
+	0x00000008	VSyncNegative
+	0x00000010	Interlace
+	0x00000020	DoubleScan
+	0x00000040	CSync
+	0x00000080	CSyncPositive
+	0x00000100	CSyncNegative
+	0x00000200	HSkewPresent
+	0x00000400	BCast
+	0x00000800	PixelMultiplex
+	0x00001000	DoubleClock
+	0x00002000	ClockDivideBy2
+└───
+┌───
+    CONNECTION
+	0		Connected
+	1		Disconnected
+	2		UnknownConnection
+└───
+
+
+A.2 Protocol Requests
+
+Opcodes 1 and 3 were used in the 0.0 protocols, and will return
+errors if used in version 1.0.
+
+┌───
+    RRQueryVersion
+
+	1	CARD8			major opcode
+	1	0			RandR opcode
+	2	3			length
+	4	CARD32			major version
+	4	CARD32			minor version
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	0			reply length
+	1	CARD32			major version
+	1	CARD32			minor version
+└───
+┌───
+    RRSetScreenConfig
+
+	1	CARD8			major opcode
+	1	2			RandR opcode
+	2	6			length
+	4	WINDOW			window on screen to be configured
+	4	TIMESTAMP		timestamp
+	4	TIMESTAMP		config timestamp
+	2	SIZEID			size index
+	2	ROTATION		rotation/reflection
+	2	CARD16			refresh rate (1.1 only)
+	2	CARD16			pad
+      ▶
+	1	1			Reply
+	1	RRCONFIGSTATUS		status
+	2	CARD16			sequence number
+	4	0			reply length
+	4	TIMESTAMP		new timestamp
+	4	TIMESTAMP		new configuration timestamp
+	4	WINDOW			root
+	2	SUBPIXELORDER		subpixel order defined in Render
+	2	CARD16			pad4
+	4	CARD32			pad5
+	4	CARD32			pad6
+└───
+┌───
+    RRSelectInput
+
+	1	CARD8			major opcode
+	1	4			RandR opcode
+	2	3			length
+	4	WINDOW			window
+	2	SETofRRSELECTMASK	enable
+	2	CARD16			pad
+└───
+┌───
+    RRGetScreenInfo
+
+	1	CARD8			major opcode
+	1	5			RandR opcode
+	2	2			length
+	4	WINDOW			window
+      ▶
+	1	1			Reply
+	1	CARD8			set of Rotations
+	2	CARD16			sequence number
+	4	0			reply length
+	4	WINDOW			root window
+	4	TIMESTAMP		timestamp
+	4	TIMESTAMP		config timestamp
+	2	CARD16			number of SCREENSIZE following
+	2	SIZEID			current size index
+	2	ROTATION		current rotation and reflection
+	2	CARD16			current rate (added in version 1.1)
+	2	CARD16			length of rate info (number of CARD16s)
+	2	CARD16			pad
+
+	SCREENSIZE
+	2	CARD16			width in pixels
+	2	CARD16			height in pixels
+	2	CARD16			width in millimeters
+	2	CARD16			height in millimeters
+
+	REFRESH
+	2	CARD16			number of rates (n)
+	2n	CARD16			rates
+└───
+
+A.2.1 Protocol Requests added with version 1.2
+
+┌───
+    RRGetScreenSizeRange
+	1	CARD8			major opcode
+	1	6			RandR opcode
+	2	2			length
+	4	WINDOW			window
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	0			reply length
+	2	CARD16			minWidth
+	2	CARD16			minHeight
+	2	CARD16			maxWidth
+	2	CARD16			maxHeight
+	16				unused
+└───
+┌───
+    RRSetScreenSize
+	1	CARD8			major opcode
+	1	7			RandR opcode
+	2	5			length
+	4	WINDOW			window
+	2	CARD16			width
+	2	CARD16			height
+	4	CARD32			width in millimeters
+	4	CARD32			height in millimeters
+└───
+┌───
+    RRGetScreenResources
+	1	CARD8			major opcode
+	1	8			RandR opcode
+	2	2			length
+	4	WINDOW			window
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	c+o+8m+(b+p)/4		reply length
+	4	TIMESTAMP		timestamp
+	4	TIMESTAMP		config-timestamp
+	2	c			number of CRTCs
+	2	o			number of outputs
+	2	m			number of modeinfos
+	2	b			total bytes in mode names
+	8				unused
+	4c	LISTofCRTC		crtcs
+	4o	LISTofOUTPUT		outputs
+	32m	LISTofMODEINFO		modeinfos
+	b	STRING8			mode names
+	p				unused, p=pad(b)
+└───
+┌───
+    RRGetOutputInfo
+	1	CARD8			major opcode
+	1	9			RandR opcode
+	2	3			length
+	4	OUTPUT			output
+	4	TIMESTAMP		config-timestamp
+      ▶
+	1	1			Reply
+	1	RRCONFIGSTATUS		status
+	2	CARD16			sequence number
+	4	1+c+m+(n+p)/4		reply length
+	4	TIMESTAMP		timestamp
+	4	CRTC			current connected crtc
+	4	CARD32			width in millimeters
+	4	CARD32			height in millimeters
+	1	CONNECTION		connection
+	1	SUBPIXELORDER		subpixel-order
+	2	c			number of CRTCs
+	2	m			number of modes
+	2	p			number of preferred modes
+	2	o			number of clones
+	2	n			length of name
+	4c	LISTofCRTC		crtcs
+	4m	LISTofMODE		modes
+	4o	LISTofOUTPUT		clones
+	n	STRING8			name
+	p				unused, p=pad(n)
+└───
+┌───
+    RRListOutputProperties
+	1	CARD8			major opcode
+	1	10			RandR opcode
+	2	2			length
+	4	OUTPUT			output
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	n			reply length
+	2	n			number of ATOMs in atoms
+	22				unused
+	4n	LISTofATOM		atoms
+└───
+┌───
+    RRQueryOutputProperty
+	1	CARD8			major opcode
+	1	11			RandR opcode
+	2	3			request length
+	4	OUTPUT			output
+	4	ATOM			property
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	n			reply length
+	1	BOOL			pending
+	1	BOOL			range
+	1	BOOL			immutable
+	21				unused
+	4n	LISTofINT32		valid values
+└───
+┌───
+    RRConfigureOutputProperty
+	1	CARD8			major opcode
+	1	12			RandR opcode
+	2	4+n			request length
+	4	OUTPUT			output
+	4	ATOM			property
+	1	BOOL			pending
+	1	BOOL			range
+	2				unused
+	4n	LISTofINT32		valid values
+└───
+┌───
+    RRChangeOutputProperty
+	1	CARD8			major opcode
+	1	13			RandR opcode
+	2	6+(n+p)/4		request length
+	4	OUTPUT			output
+	4	ATOM			property
+	4	ATOM			type
+	1	CARD8			format
+	1				mode
+		0	Replace
+		1	Prepend
+		2	Append
+	2				unused
+	4	CARD32			length of data in format units
+					(= n for format = 8)
+					(= n/2 for format = 16)
+					(= n/4 for format = 32)
+	n	LISTofBYTE		data
+					(n is a multiple of 2 for format = 16)
+					(n is a multiple of 4 for format = 32)
+	p				unused, p=pad(n)
+└───
+┌───
+    RRDeleteOutputProperty
+	1	CARD8			major opcode
+	1	14			RandR opcode
+	2	3			request length
+	4	OUTPUT			output
+	4	ATOM			property
+└───
+┌───
+    RRGetOutputProperty
+	1	CARD8			major opcode
+	1	15			RandR opcode
+	2	7			request length
+	4	OUTPUT			output
+	4	ATOM			property
+	4	ATOM			type
+		0	AnyPropertyType
+	4	CARD32			long-offset
+	4	CARD32			long-length
+	1	BOOL			delete
+	1	BOOL			pending
+	2				unused
+      ▶
+	1	1			Reply
+	1	CARD8			format
+	2	CARD16			sequence number
+	4	(n+p)/4			reply length
+	4	ATOM			type
+		0	None
+	4	CARD32			bytes-after
+	4	CARD32			length of value in format units
+					(= 0 for format = 0)
+					(= n for format = 8)
+					(= n/2 for format = 16)
+					(= n/4 for format = 32)
+	12				unused
+	n	LISTofBYTE		value
+					(n is zero for format = 0)
+					(n is a multiple of 2 for format = 16)
+					(n is a multiple of 4 for format = 32)
+	p				unused, p=pad(n)
+└───
+┌───
+    RRCreateMode
+	1	CARD8			major opcode
+	1	16			RandR opcode
+	2	12+(n+p)/4		length
+	4	WINDOW			window
+	32	MODEINFO		mode
+	n	STRING8			mode name
+	p				unused, p=pad(n)
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	0			reply length
+	4	MODE			mode
+	20				unused
+└───
+┌───
+    RRDestroyMode
+	1	CARD8			major opcode
+	1	17			RandR opcode
+	2	2			length
+	4	MODE			mode
+└───
+┌───
+    RRAddOutputMode
+	1	CARD8			major opcode
+	1	18			RandR opcode
+	2	3			length
+	4	OUTPUT			output
+	4	MODE			mode
+└───
+┌───
+    RRDeleteOutputMode
+	1	CARD8			major opcode
+	1	19			RandR opcode
+	2	3			length
+	4	OUTPUT			output
+	4	MODE			mode
+└───
+┌───
+    RRGetCrtcInfo
+	1	CARD8			major opcode
+	1	20			RandR opcode
+	2	3			length
+	4	CRTC			crtc
+	4	TIMESTAMP		config-timestamp
+      ▶
+	1	1			Reply
+	1	RRCONFIGSTATUS		status
+	2	CARD16			sequence number
+	4	o+p			reply length
+	4	TIMESTATMP		timestamp
+	2	INT16			x
+	2	INT16			y
+	2	CARD16			width
+	2	CARD16			height
+	4	MODE			mode
+	2	ROTATION		current rotation and reflection
+	2	ROTATION		set of possible rotations
+	2	o			number of outputs
+	2	p			number of possible outputs
+	4o	LISTofOUTPUT		outputs
+	4p	LISTofOUTPUT		possible outputs
+└───
+┌───
+    RRSetCrtcConfig
+	1	CARD8			major opcode
+	1	21			RandR opcode
+	2	7+2n			length
+	4	CRTC			crtc
+	4	TIMESTAMP		timestamp
+	4	TIMESTAMP		config timestamp
+	2	INT16			x
+	2	INT16			y
+	4	MODE			mode
+	2	ROTATION		rotation/reflection
+	2				unused
+	8n	LISTofOUTPUT		outputs
+      ▶
+	1	1			Reply
+	1	RRCONFIGSTATUS		status
+	2	CARD16			sequence number
+	4	0			reply length
+	4	TIMESTAMP		new timestamp
+	20				unused
+└───
+┌───
+    RRGetCrtcGammaSize
+	1	CARD8			major opcode
+	1	22			RandR opcode
+	2	2			length
+	4	CRTC			crtc
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	0			reply length
+	2	CARD16			size
+	22				unused
+└───
+┌───
+    RRGetCrtcGamma
+	1	CARD8			major opcode
+	1	23			RandR opcode
+	2	2			length
+	4	CRTC			crtc
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	(6n+2)/4		reply length
+	2	n			size
+	20				unused
+	2n	LISTofCARD16		red
+	2n	LISTofCARD16		green
+	2n	LISTofCARD16		blue
+	p				unused, p=pad(6n)
+└───
+┌───
+    RRSetCrtcGamma
+	1	CARD8			major opcode
+	1	24			RandR opcode
+	2	3+(6n+2)/4		length
+	4	CRTC			crtc
+	2	n			size
+	2				unused
+	2n	LISTofCARD16		red
+	2n	LISTofCARD16		green
+	2n	LISTofCARD16		blue
+	p				unused, p=pad(6n)
+└───
+
+A.2.2 Protocol Requests added with version 1.3
+
+┌───
+    RRGetScreenResourcesCurrent
+	1	CARD8			major opcode
+	1	25			RandR opcode
+	2	2			length
+	4	WINDOW			window
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	c+o+8m+(b+p)/4		reply length
+	4	TIMESTAMP		timestamp
+	4	TIMESTAMP		config-timestamp
+	2	c			number of CRTCs
+	2	o			number of outputs
+	2	m			number of modeinfos
+	2	b			total bytes in mode names
+	8				unused
+	4c	LISTofCRTC		crtcs
+	4o	LISTofOUTPUT		outputs
+	32m	LISTofMODEINFO		modeinfos
+	b	STRING8			mode names
+	p				unused, p=pad(b)
+└───
+
+┌───
+    RRSetCrtcTransform
+	1	CARD8			major opcode
+	1	26			RandR opcode
+	2	12+(n+p)/4+v		length
+	4	CRTC			crtc
+	36	TRANSFORM		transform
+	2	CARD16			filter length
+	2				unused
+	n	STRING8			filter name
+	p				unused, p=pad(n)
+	4v	FIXED			filter params
+└───
+
+┌───
+    RRGetCrtcTransform
+	1	CARD8			major opcode
+	1	27			RandR opcode
+	2	2			length
+	4	CRTC			crtc
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	16+(pn+pnp)/4+(cn+cnp)/4+pf+cf	reply length
+	36	TRANSFORM		pending transform
+	1	BOOL			has transforms
+	3				unused
+	36	TRANSFORM		current transform
+	4				unused
+	2	pn			pending filter name length
+	2	pf			pending filter num params
+	2	cn			current filter name length
+	2	cf			current filter num params
+	pn	STRING8			pending filter name
+	pnp				unused, pnp=pad(pn)
+	4*pf	FIXED			pending filter params
+	cn	STRING8			current filter name
+	cnp				unused, cnp=pad(cn)
+	4*cf	FIXED			current filter params
+└───
+
+┌───
+    RRGetPanning
+	1	CARD8			major opcode
+	1	28			RandR opcode
+	2	2			length
+	4	CRTC			crtc
+      ▶
+	1	1			Reply
+	1	RRCONFIGSTATUS		status
+	2	CARD16			sequence number
+	4	1			reply length
+	4	TIMESTAMP		timestamp
+	2	CARD16			left
+	2	CARD16			top
+	2	CARD16			width
+	2	CARD16			height
+	2	CARD16			track_left
+	2	CARD16			track_top
+	2	CARD16			track_width
+	2	CARD16			track_height
+	2	INT16			border_left
+	2	INT16			border_top
+	2	INT16			border_right
+	2	INT16			border_bottom
+└───
+┌───
+    RRSetPanning
+	1	CARD8			major opcode
+	1	29			RandR opcode
+	2	9			length
+	4	CRTC			crtc
+	4	TIMESTAMP		timestamp
+	2	CARD16			left
+	2	CARD16			top
+	2	CARD16			width
+	2	CARD16			height
+	2	CARD16			track_left
+	2	CARD16			track_top
+	2	CARD16			track_width
+	2	CARD16			track_height
+	2	INT16			border_left
+	2	INT16			border_top
+	2	INT16			border_right
+	2	INT16			border_bottom
+      ▶
+	1	1			Reply
+	1	RRCONFIGSTATUS		status
+	2	CARD16			sequence number
+	4	0			reply length
+	4	TIMESTAMP		new timestamp
+	20				unused
+└───
+
+┌───
+    RRSetOutputPrimary
+	1	CARD8			major opcode
+	1	30			RandR opcode
+	2	3			length
+	4	WINDOW			window
+	4	OUTPUT			output
+└───
+
+┌───
+    RRGetOutputPrimary
+	1	CARD8			major opcode
+	1	31			RandR opcode
+	2	2			length
+	4	WINDOW			window
+      ▶
+	1	1			Reply
+	1				unused
+	2	CARD16			sequence number
+	4	CARD32			length
+	4	OUTPUT			output
+	4	CARD32			pad1
+	4	CARD32			pad2
+	4	CARD32			pad3
+	4	CARD32			pad4
+└───
+
+A.3 Protocol Events
+
+┌───
+    RRScreenChangeNotify
+	1	Base + 0		code
+	1	ROTATION		new rotation and reflection
+	2	CARD16			sequence number
+	4	TIMESTAMP		timestamp
+	4	TIMESTAMP		configuration timestamp
+	4	WINDOW			root window
+	4	WINDOW			request window
+	2	SIZEID			size ID
+	2	SUBPIXELORDER		subpixel order defined in Render
+	2	CARD16			width in pixels
+	2	CARD16			height in pixels
+	2	CARD16			width in millimeters
+	2	CARD16			height in millimeters
+└───
+
+A.3.1 Protocol Events added with version 1.2
+
+┌───
+    RRCrtcChangeNotify
+	1	Base + 1		code
+	1	0			sub-code
+	2	CARD16			sequence number
+	4	TIMESTAMP		timestamp
+	4	WINDOW			request window
+	4	CRTC			crtc affected
+	4	MODE			mode in use
+	2	ROTATION		new rotation and reflection
+	2				unused
+	2	INT16			x
+	2	INT16			y
+	2	CARD16			width
+	2	CARD16			height
+└───
+┌───
+    RROutputChangeNotify
+	1	Base + 1		code
+	1	1			sub-code
+	2	CARD16			sequence number
+	4	TIMESTAMP		timestamp
+	4	TIMESTAMP		configuration timestamp
+	4	WINDOW			request window
+	4	OUTPUT			output affected
+	4	CRTC			crtc in use
+	4	MODE			mode in use
+	2	ROTATION		rotation in use
+	1	CONNECTION		connection status
+	1	SUBPIXELORDER		subpixel order
+└───
+┌───
+    RROutputPropertyNotify
+	1	Base + 1		code
+	1	2			sub-code
+	2	CARD16			sequence number
+	4	WINDOW			window
+	4	OUTPUT			output
+	4	ATOM			atom
+	4	TIMESTAMP		time
+	1				state
+		0	NewValue
+		1	Deleted
+	11				unused
+└───
+
+A.4 Protocol Errors
+
+┌───
+    ERRORS
+	Base + 0		Output
+	Base + 1		Crtc
+	Base + 2		Mode
+└───
+
+Bibliography
+
+[RANDR] Gettys, Jim and Keith Packard, "The X Resize and Rotate
+	Extension - RandR", Proceedings of the 2001 USENIX Annual
+	Technical Conference, Boston, MA
+
+[RENDER]
+	Packard, Keith, "The X Rendering Extension", work in progress,
+	http://cgit.freedesktop.org/xorg/proto/renderproto/tree/renderproto.txt