Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

6 files changed, 1350 insertions, 0 deletions

diff --git a/openssl/Netware/build.bat b/openssl/Netware/build.bat
new file mode 100644
index 000000000..823134bda
--- /dev/null
+++ b/openssl/Netware/build.bat
@@ -0,0 +1,228 @@
+@echo off
+
+rem ========================================================================
+rem   Batch file to automate building OpenSSL for NetWare.
+rem
+rem   usage:
+rem      build [target] [debug opts] [assembly opts] [configure opts]
+rem
+rem      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+rem                    - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+rem                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
+rem                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
+rem 
+rem      debug opts    - "debug"  - build debug
+rem
+rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
+rem                    - "nw-nasm"  - use NASM assembler
+rem                    - "no-asm"   - don't use assembly
+rem
+rem      configure opts- all unrecognized arguments are passed to the
+rem                       perl configure script
+rem
+rem   If no arguments are specified the default is to build non-debug with
+rem   no assembly.  NOTE: there is no default BLD_TARGET.
+rem
+
+
+
+rem   No assembly is the default - Uncomment section below to change
+rem   the assembler default
+set ASM_MODE=
+set ASSEMBLER=
+set NO_ASM=no-asm
+
+rem   Uncomment to default to the Metrowerks assembler
+rem set ASM_MODE=nw-mwasm
+rem set ASSEMBLER=Metrowerks
+rem set NO_ASM=
+
+rem   Uncomment to default to the NASM assembler
+rem set ASM_MODE=nw-nasm
+rem set ASSEMBLER=NASM
+rem set NO_ASM=
+
+rem   No default Bld target
+set BLD_TARGET=no_target
+rem set BLD_TARGET=netware-clib
+rem set BLD_TARGET=netware-libc
+
+
+rem   Default to build non-debug
+set DEBUG=
+                                    
+rem   Uncomment to default to debug build
+rem set DEBUG=debug
+
+
+set CONFIG_OPTS=
+set ARG_PROCESSED=NO
+
+
+rem   Process command line args
+:opts
+if "a%1" == "a" goto endopt
+if "%1" == "no-asm"   set NO_ASM=no-asm
+if "%1" == "no-asm"   set ARG_PROCESSED=YES
+if "%1" == "debug"    set DEBUG=debug
+if "%1" == "debug"    set ARG_PROCESSED=YES
+if "%1" == "nw-nasm"  set ASM_MODE=nw-nasm
+if "%1" == "nw-nasm"  set ASSEMBLER=NASM
+if "%1" == "nw-nasm"  set NO_ASM=
+if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
+if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
+if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
+if "%1" == "nw-mwasm" set NO_ASM=
+if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
+if "%1" == "netware-clib" set BLD_TARGET=netware-clib
+if "%1" == "netware-clib" set ARG_PROCESSED=YES
+if "%1" == "netware-clib-bsdsock" set BLD_TARGET=netware-clib-bsdsock
+if "%1" == "netware-clib-bsdsock" set ARG_PROCESSED=YES
+if "%1" == "netware-libc" set BLD_TARGET=netware-libc
+if "%1" == "netware-libc" set ARG_PROCESSED=YES
+if "%1" == "netware-libc-bsdsock" set BLD_TARGET=netware-libc-bsdsock
+if "%1" == "netware-libc-bsdsock" set ARG_PROCESSED=YES
+
+rem   If we didn't recognize the argument, consider it an option for config
+if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
+if "%ARG_PROCESSED%" == "YES" set ARG_PROCESSED=NO
+
+shift
+goto opts
+:endopt
+
+rem make sure a valid BLD_TARGET was specified
+if "%BLD_TARGET%" == "no_target" goto no_target
+
+rem build the nlm make file name which includes target and debug info
+set NLM_MAKE=
+if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
+if "%BLD_TARGET%" == "netware-clib-bsdsock" set NLM_MAKE=netware\nlm_clib_bsdsock
+if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
+if "%BLD_TARGET%" == "netware-libc-bsdsock" set NLM_MAKE=netware\nlm_libc_bsdsock
+if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
+if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
+
+if "%NO_ASM%" == "no-asm" set ASM_MODE=
+if "%NO_ASM%" == "no-asm" set ASSEMBLER=
+if "%NO_ASM%" == "no-asm" set CONFIG_OPTS=%CONFIG_OPTS% no-asm
+if "%NO_ASM%" == "no-asm" goto do_config
+
+
+rem ==================================================
+echo Generating x86 for %ASSEMBLER% assembler
+
+echo Bignum
+cd crypto\bn\asm
+rem perl x86.pl %ASM_MODE% > bn-nw.asm
+perl bn-586.pl %ASM_MODE% > bn-nw.asm
+perl co-586.pl %ASM_MODE% > co-nw.asm
+cd ..\..\..
+
+echo AES
+cd crypto\aes\asm
+perl aes-586.pl %ASM_MODE% > a-nw.asm
+cd ..\..\..
+
+echo DES
+cd crypto\des\asm
+perl des-586.pl %ASM_MODE% > d-nw.asm
+cd ..\..\..
+
+echo "crypt(3)"
+
+cd crypto\des\asm
+perl crypt586.pl %ASM_MODE% > y-nw.asm
+cd ..\..\..
+
+echo Blowfish
+
+cd crypto\bf\asm
+perl bf-586.pl %ASM_MODE% > b-nw.asm
+cd ..\..\..
+
+echo CAST5
+cd crypto\cast\asm
+perl cast-586.pl %ASM_MODE% > c-nw.asm
+cd ..\..\..
+
+echo RC4
+cd crypto\rc4\asm
+perl rc4-586.pl %ASM_MODE% > r4-nw.asm
+cd ..\..\..
+
+echo MD5
+cd crypto\md5\asm
+perl md5-586.pl %ASM_MODE% > m5-nw.asm
+cd ..\..\..
+
+echo SHA1
+cd crypto\sha\asm
+perl sha1-586.pl %ASM_MODE% > s1-nw.asm
+cd ..\..\..
+
+echo RIPEMD160
+cd crypto\ripemd\asm
+perl rmd-586.pl %ASM_MODE% > rm-nw.asm
+cd ..\..\..
+
+echo RC5\32
+cd crypto\rc5\asm
+perl rc5-586.pl %ASM_MODE% > r5-nw.asm
+cd ..\..\..
+
+echo CPUID
+cd crypto
+perl x86cpuid.pl %ASM_MODE% > x86cpuid-nw.asm
+cd ..\
+
+rem ===============================================================
+rem
+:do_config
+
+echo .
+echo configure options: %CONFIG_OPTS% %BLD_TARGET%
+echo .
+perl configure %CONFIG_OPTS% %BLD_TARGET%
+
+perl util\mkfiles.pl >MINFO
+
+echo .
+echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
+echo .
+perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
+
+make -f %NLM_MAKE% vclean
+echo .
+echo The makefile "%NLM_MAKE%" has been created use your maketool to
+echo build (ex: make -f %NLM_MAKE%)
+goto end
+
+rem ===============================================================
+rem
+:no_target
+echo .
+echo .  No build target specified!!!
+echo .
+echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
+echo .
+echo .     target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+echo .                   - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+echo .                   - "netware-libc" - LibC NetWare build (WinSock Sockets)
+echo .                   - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
+echo .
+echo .     debug opts    - "debug"  - build debug
+echo .
+echo .     assembly opts - "nw-mwasm" - use Metrowerks assembler
+echo .                     "nw-nasm"  - use NASM assembler
+echo .                     "no-asm"   - don't use assembly
+echo .
+echo .     configure opts- all unrecognized arguments are passed to the
+echo .                      perl configure script
+echo .
+echo .  If no debug or assembly opts are specified the default is to build
+echo .  non-debug without assembly
+echo .
+
+        
+:end        
diff --git a/openssl/Netware/cpy_tests.bat b/openssl/Netware/cpy_tests.bat
new file mode 100644
index 000000000..1583f2806
--- /dev/null
+++ b/openssl/Netware/cpy_tests.bat
@@ -0,0 +1,113 @@
+@echo off
+
+rem   Batch file to copy OpenSSL stuff to a NetWare server for testing
+
+rem   This batch file will create an "opensssl" directory at the root of the
+rem   specified NetWare drive and copy the required files to run the tests.
+rem   It should be run from inside the "openssl\netware" subdirectory.
+
+rem   Usage:
+rem      cpy_tests.bat <test subdirectory> <NetWare drive>
+rem          <test subdirectory> - out_nw.dbg | out_nw
+rem          <NetWare drive> - any mapped drive letter
+rem
+rem      example ( copy from debug build to m: dirve ):
+rem              cpy_tests.bat out_nw.dbg m:
+rem
+rem      CAUTION:  If a directory named OpenSSL exists on the target drive
+rem                it will be deleted first.
+
+
+if "%1" == "" goto usage
+if "%2" == "" goto usage
+
+rem   Assume running in \openssl directory unless cpy_tests.bat exists then
+rem   it must be the \openssl\netware directory
+set loc=.
+if exist cpy_tests.bat set loc=..
+
+rem   make sure the local build subdirectory specified is valid
+if not exist %loc%\%1\NUL goto invalid_dir
+
+rem   make sure target drive is valid
+if not exist %2\NUL goto invalid_drive
+
+rem   If an OpenSSL directory exists on the target drive, remove it
+if exist %2\openssl\NUL goto remove_openssl
+goto do_copy
+
+:remove_openssl
+echo .
+echo OpenSSL directory exists on %2 - it will be removed!
+pause
+rmdir %2\openssl /s /q
+
+:do_copy
+rem   make an "openssl" directory and others at the root of the NetWare drive
+mkdir %2\openssl
+mkdir %2\openssl\test_out
+mkdir %2\openssl\apps
+mkdir %2\openssl\certs
+mkdir %2\openssl\test
+
+
+rem   copy the test nlms
+copy %loc%\%1\*.nlm %2\openssl\
+
+rem   copy the test perl script
+copy %loc%\netware\do_tests.pl %2\openssl\
+
+rem   copy the certs directory stuff
+xcopy %loc%\certs\*.*         %2\openssl\certs\ /s
+
+rem   copy the test directory stuff
+copy %loc%\test\CAss.cnf      %2\openssl\test\
+copy %loc%\test\Uss.cnf       %2\openssl\test\
+copy %loc%\test\pkcs7.pem     %2\openssl\test\
+copy %loc%\test\pkcs7-1.pem   %2\openssl\test\
+copy %loc%\test\testcrl.pem   %2\openssl\test\
+copy %loc%\test\testp7.pem    %2\openssl\test\
+copy %loc%\test\testreq2.pem  %2\openssl\test\
+copy %loc%\test\testrsa.pem   %2\openssl\test\
+copy %loc%\test\testsid.pem   %2\openssl\test\
+copy %loc%\test\testx509.pem  %2\openssl\test\
+copy %loc%\test\v3-cert1.pem  %2\openssl\test\
+copy %loc%\test\v3-cert2.pem  %2\openssl\test\
+copy %loc%\crypto\evp\evptests.txt %2\openssl\test\
+
+rem   copy the apps directory stuff
+copy %loc%\apps\client.pem    %2\openssl\apps\
+copy %loc%\apps\server.pem    %2\openssl\apps\
+copy %loc%\apps\openssl.cnf   %2\openssl\apps\
+
+echo .
+echo Tests copied
+echo Run the test script at the console by typing:
+echo     "Perl \openssl\do_tests.pl"
+echo .
+echo Make sure the Search path includes the OpenSSL subdirectory
+
+goto end
+
+:invalid_dir
+echo.
+echo Invalid build directory specified: %1
+echo.
+goto usage
+
+:invalid_drive
+echo.
+echo Invalid drive: %2
+echo.
+goto usage
+
+:usage
+echo.
+echo usage: cpy_tests.bat [test subdirectory] [NetWare drive]
+echo     [test subdirectory] - out_nw_clib.dbg, out_nw_libc.dbg, etc. 
+echo     [NetWare drive]     - any mapped drive letter
+echo.
+echo example: cpy_test out_nw_clib.dbg M:
+echo  (copy from clib debug build area to M: drive)
+
+:end
diff --git a/openssl/Netware/do_tests.pl b/openssl/Netware/do_tests.pl
new file mode 100644
index 000000000..ac482dbe2
--- /dev/null
+++ b/openssl/Netware/do_tests.pl
@@ -0,0 +1,624 @@
+# perl script to run OpenSSL tests
+
+
+my $base_path      = "\\openssl";
+
+my $output_path    = "$base_path\\test_out";
+my $cert_path      = "$base_path\\certs";
+my $test_path      = "$base_path\\test";
+my $app_path       = "$base_path\\apps";
+
+my $tmp_cert       = "$output_path\\cert.tmp";
+my $OpenSSL_config = "$app_path\\openssl.cnf";
+my $log_file       = "$output_path\\tests.log";
+
+my $pause = 0;
+
+
+#  process the command line args to see if they wanted us to pause
+#  between executing each command
+foreach $i (@ARGV)
+{
+   if ($i =~ /^-p$/)
+   { $pause=1; }
+}
+
+
+
+main();
+
+
+############################################################################
+sub main()
+{
+   # delete all the output files in the output directory
+   unlink <$output_path\\*.*>;
+
+   # open the main log file
+   open(OUT, ">$log_file") || die "unable to open $log_file\n";
+
+   print( OUT "========================================================\n");
+   my $outFile = "$output_path\\version.out";
+   system("openssl2 version (CLIB_OPT)/>$outFile");
+   log_output("CHECKING FOR OPENSSL VERSION:", $outFile);
+
+   algorithm_tests();
+   encryption_tests();
+   evp_tests();
+   pem_tests();
+   verify_tests();
+   ca_tests();
+   ssl_tests();
+
+   close(OUT);
+
+   print("\nCompleted running tests.\n\n");
+   print("Check log file for errors: $log_file\n");
+}
+
+############################################################################
+sub algorithm_tests
+{
+   my $i;
+   my $outFile;
+   my @tests = ( rsa_test, destest, ideatest, bftest, bntest, shatest, sha1test,
+                 sha256t, sha512t, dsatest, md2test, md4test, md5test, mdc2test,
+                 rc2test, rc4test, rc5test, randtest, rmdtest, dhtest, ecdhtest,
+                 ecdsatest, ectest, exptest, casttest, hmactest );
+
+   print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "CRYPTO ALGORITHM TESTS:\n\n");
+
+   foreach $i (@tests)
+   {
+      if (-e "$base_path\\$i.nlm")
+      {
+         $outFile = "$output_path\\$i.out";
+         system("$i (CLIB_OPT)/>$outFile");
+         log_desc("Test: $i\.nlm:");
+         log_output("", $outFile );
+      }
+      else
+      {
+         log_desc("Test: $i\.nlm: file not found");
+      }
+   }
+}
+
+############################################################################
+sub encryption_tests
+{
+   my $i;
+   my $outFile;
+   my @enc_tests = ( "enc", "rc4", "des-cfb", "des-ede-cfb", "des-ede3-cfb",
+                     "des-ofb", "des-ede-ofb", "des-ede3-ofb",
+                     "des-ecb", "des-ede", "des-ede3", "des-cbc",
+                     "des-ede-cbc", "des-ede3-cbc", "idea-ecb", "idea-cfb",
+                     "idea-ofb", "idea-cbc", "rc2-ecb", "rc2-cfb",
+                     "rc2-ofb", "rc2-cbc", "bf-ecb", "bf-cfb",
+                     "bf-ofb", "bf-cbc" );
+
+   my $input = "$base_path\\do_tests.pl";
+   my $cipher = "$output_path\\cipher.out";
+   my $clear = "$output_path\\clear.out";
+
+   print( "\nRUNNING ENCRYPTION & DECRYPTION TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "FILE ENCRYPTION & DECRYPTION TESTS:\n\n");
+
+   foreach $i (@enc_tests)
+   {
+      log_desc("Testing: $i");
+
+      # do encryption
+      $outFile = "$output_path\\enc.out";
+      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile" );
+      log_output("Encrypting: $input --> $cipher", $outFile);
+
+      # do decryption
+      $outFile = "$output_path\\dec.out";
+      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
+      log_output("Decrypting: $cipher --> $clear", $outFile);
+
+      # compare files
+      $x = compare_files( $input, $clear, 1);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $clear\n");
+         print( OUT "SUCCESS - files match: $input, $clear\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+
+      do_wait();
+
+      # Now do the same encryption but use Base64
+
+      # do encryption B64
+      $outFile = "$output_path\\B64enc.out";
+      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile");
+      log_output("Encrypting(B64): $cipher --> $clear", $outFile);
+
+      # do decryption B64
+      $outFile = "$output_path\\B64dec.out";
+      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
+      log_output("Decrypting(B64): $cipher --> $clear", $outFile);
+
+      # compare files
+      $x = compare_files( $input, $clear, 1);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $clear\n");
+         print( OUT "SUCCESS - files match: $input, $clear\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+
+      do_wait();
+
+   } # end foreach
+
+   # delete the temporary files
+   unlink($cipher);
+   unlink($clear);
+}
+
+
+############################################################################
+sub pem_tests
+{
+   my $i;
+   my $tmp_out;
+   my $outFile = "$output_path\\pem.out";
+
+   my %pem_tests = (
+         "crl"      => "testcrl.pem",
+          "pkcs7"   => "testp7.pem",
+          "req"     => "testreq2.pem",
+          "rsa"     => "testrsa.pem",
+          "x509"    => "testx509.pem",
+          "x509"    => "v3-cert1.pem",
+          "sess_id" => "testsid.pem"  );
+
+
+   print( "\nRUNNING PEM TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "PEM TESTS:\n\n");
+
+   foreach $i (keys(%pem_tests))
+   {
+      log_desc( "Testing: $i");
+
+      my $input = "$test_path\\$pem_tests{$i}";
+
+      $tmp_out = "$output_path\\$pem_tests{$i}";
+
+      if ($i ne "req" )
+      {
+         system("openssl2 $i -in $input -out $tmp_out (CLIB_OPT)/>$outFile");
+         log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
+      }
+      else
+      {
+         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config (CLIB_OPT)/>$outFile");
+         log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
+      }
+
+      $x = compare_files( $input, $tmp_out);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $tmp_out\n");
+         print( OUT "SUCCESS - files match: $input, $tmp_out\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+      do_wait();
+
+   } # end foreach
+}
+
+
+############################################################################
+sub verify_tests
+{
+   my $i;
+   my $outFile = "$output_path\\verify.out";
+
+   $cert_path =~ s/\\/\//g;
+   my @cert_files = <$cert_path/*.pem>;
+
+   print( "\nRUNNING VERIFY TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "VERIFY TESTS:\n\n");
+
+   make_tmp_cert_file();
+
+   foreach $i (@cert_files)
+   {
+      system("openssl2 verify -CAfile $tmp_cert $i (CLIB_OPT)/>$outFile");
+      log_desc("Verifying cert: $i");
+      log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
+   }
+}
+
+
+############################################################################
+sub ssl_tests
+{
+   my $outFile = "$output_path\\ssl_tst.out";
+   my($CAcert) = "$output_path\\certCA.ss";
+   my($Ukey)   = "$output_path\\keyU.ss";
+   my($Ucert)  = "$output_path\\certU.ss";
+   my($ssltest)= "ssltest -key $Ukey -cert $Ucert -c_key $Ukey -c_cert $Ucert -CAfile $CAcert";
+
+   print( "\nRUNNING SSL TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "SSL TESTS:\n\n");
+
+   system("ssltest -ssl2 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2:");
+   log_output("ssltest -ssl2", $outFile);
+
+   system("$ssltest -ssl2 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with server authentication:");
+   log_output("$ssltest -ssl2 -server_auth", $outFile);
+
+   system("$ssltest -ssl2 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with client authentication:");
+   log_output("$ssltest -ssl2 -client_auth", $outFile);
+
+   system("$ssltest -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with both client and server authentication:");
+   log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
+
+   system("ssltest -ssl3 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3:");
+   log_output("ssltest -ssl3", $outFile);
+
+   system("$ssltest -ssl3 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with server authentication:");
+   log_output("$ssltest -ssl3 -server_auth", $outFile);
+
+   system("$ssltest -ssl3 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with client authentication:");
+   log_output("$ssltest -ssl3 -client_auth", $outFile);
+
+   system("$ssltest -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with both client and server authentication:");
+   log_output("$ssltest -ssl3 -server_auth -client_auth", $outFile);
+
+   system("ssltest (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3:");
+   log_output("ssltest", $outFile);
+
+   system("$ssltest -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with server authentication:");
+   log_output("$ssltest -server_auth", $outFile);
+
+   system("$ssltest -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with client authentication:");
+   log_output("$ssltest -client_auth ", $outFile);
+
+   system("$ssltest -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with both client and server authentication:");
+   log_output("$ssltest -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair -ssl2 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl2", $outFile);
+
+   system("ssltest -bio_pair -dhe1024dsa -v (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
+   log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with client authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair -ssl3 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl3", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with client authentication  via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 via BIO pair:");
+   log_output("ssltest -bio_pair", $outFile);
+
+   system("$ssltest -bio_pair -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -server_auth -client_auth", $outFile);
+}
+
+
+############################################################################
+sub ca_tests
+{
+   my $outFile = "$output_path\\ca_tst.out";
+
+   my($CAkey)     = "$output_path\\keyCA.ss";
+   my($CAcert)    = "$output_path\\certCA.ss";
+   my($CAserial)  = "$output_path\\certCA.srl";
+   my($CAreq)     = "$output_path\\reqCA.ss";
+   my($CAreq2)    = "$output_path\\req2CA.ss";
+
+   my($CAconf)    = "$test_path\\CAss.cnf";
+
+   my($Uconf)     = "$test_path\\Uss.cnf";
+
+   my($Ukey)      = "$output_path\\keyU.ss";
+   my($Ureq)      = "$output_path\\reqU.ss";
+   my($Ucert)     = "$output_path\\certU.ss";
+
+   print( "\nRUNNING CA TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "CA TESTS:\n");
+
+   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new (CLIB_OPT)/>$outFile");
+   log_desc("Make a certificate request using req:");
+   log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
+
+   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey (CLIB_OPT)/>$outFile");
+   log_desc("Convert the certificate request into a self signed certificate using x509:");
+   log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
+
+   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 (CLIB_OPT)/>$outFile");
+   log_desc("Convert a certificate into a certificate request using 'x509':");
+   log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
+
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout (CLIB_OPT)/>$outFile");
+   log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
+
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout (CLIB_OPT)/>$outFile");
+   log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
+
+   system("openssl2 verify -CAfile $CAcert $CAcert (CLIB_OPT)/>$outFile");
+   log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
+
+   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new (CLIB_OPT)/>$outFile");
+   log_desc("Make another certificate request using req:");
+   log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
+
+   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial (CLIB_OPT)/>$outFile");
+   log_desc("Sign certificate request with the just created CA via x509:");
+   log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
+
+   system("openssl2 verify -CAfile $CAcert $Ucert (CLIB_OPT)/>$outFile");
+   log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
+
+   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert (CLIB_OPT)/>$outFile");
+   log_desc("Certificate details");
+   log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
+
+   print(OUT "--\n");
+   print(OUT "The generated CA certificate is $CAcert\n");
+   print(OUT "The generated CA private key is $CAkey\n");
+   print(OUT "The current CA signing serial number is in $CAserial\n");
+
+   print(OUT "The generated user certificate is $Ucert\n");
+   print(OUT "The generated user private key is $Ukey\n");
+   print(OUT "--\n");
+}
+
+############################################################################
+sub evp_tests
+{
+   my $i = 'evp_test';
+
+   print( "\nRUNNING EVP TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "EVP TESTS:\n\n");
+
+   if (-e "$base_path\\$i.nlm")
+   {
+       my $outFile = "$output_path\\$i.out";
+       system("$i $test_path\\evptests.txt (CLIB_OPT)/>$outFile");
+       log_desc("Test: $i\.nlm:");
+       log_output("", $outFile );
+   }
+   else
+   {
+       log_desc("Test: $i\.nlm: file not found");
+   }
+}
+
+############################################################################
+sub log_output( $ $ )
+{
+   my( $desc, $file ) = @_;
+   my($error) = 0;
+   my($key);
+   my($msg);
+
+   if ($desc)
+   {
+      print("\r$desc\n");
+      print(OUT "$desc\n");
+   }
+
+      # loop waiting for test program to complete
+   while ( stat($file) == 0)
+      { print(". "); sleep(1); }
+
+
+      # copy test output to log file
+   open(IN, "<$file");
+   while (<IN>)
+   {
+      print(OUT $_);
+      if ( $_ =~ /ERROR/ )
+      {
+         $error = 1;
+      }
+   }
+      # close and delete the temporary test output file
+   close(IN);
+   unlink($file);
+
+   if ( $error == 0 )
+   {
+      $msg = "Test Succeeded";
+   }
+   else
+   {
+      $msg = "Test Failed";
+   }
+
+   print(OUT "$msg\n");
+
+   if ($pause)
+   {
+      print("$msg - press ENTER to continue...");
+      $key = getc;
+      print("\n");
+   }
+
+      # Several of the testing scripts run a loop loading the
+      # same NLM with different options.
+      # On slow NetWare machines there appears to be some delay in the
+      # OS actually unloading the test nlms and the OS complains about.
+      # the NLM already being loaded.  This additional pause is to
+      # to help provide a little more time for unloading before trying to
+      # load again.
+   sleep(1);
+}
+
+
+############################################################################
+sub log_desc( $ )
+{
+   my( $desc ) = @_;
+
+   print("\n");
+   print("$desc\n");
+
+   print(OUT "\n");
+   print(OUT "$desc\n");
+   print(OUT "======================================\n");
+}
+
+############################################################################
+sub compare_files( $ $ $ )
+{
+   my( $file1, $file2, $binary ) = @_;
+   my( $n1, $n2, $b1, $b2 );
+   my($ret) = 1;
+
+   open(IN0, $file1) || die "\nunable to open $file1\n";
+   open(IN1, $file2) || die "\nunable to open $file2\n";
+
+  if ($binary)
+  {
+      binmode IN0;
+      binmode IN1;
+  }
+
+   for (;;)
+   {
+      $n1 = read(IN0, $b1, 512);
+      $n2 = read(IN1, $b2, 512);
+
+      if ($n1 != $n2) {last;}
+      if ($b1 != $b2) {last;}
+
+      if ($n1 == 0)
+      {
+         $ret = 0;
+         last;
+      }
+   }
+   close(IN0);
+   close(IN1);
+   return($ret);
+}
+
+############################################################################
+sub do_wait()
+{
+   my($key);
+
+   if ($pause)
+   {
+      print("Press ENTER to continue...");
+      $key = getc;
+      print("\n");
+   }
+}
+
+
+############################################################################
+sub make_tmp_cert_file()
+{
+   my @cert_files = <$cert_path/*.pem>;
+
+      # delete the file if it already exists
+   unlink($tmp_cert);
+
+   open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
+
+   print("building temporary cert file\n");
+
+   # create a temporary cert file that contains all the certs
+   foreach $i (@cert_files)
+   {
+      open( IN_CERT, $i ) || die "\nunable to open $i\n";
+
+      for(;;)
+      {
+         $n = sysread(IN_CERT, $data, 1024);
+
+         if ($n == 0)
+         {
+            close(IN_CERT);
+            last;
+         };
+
+         syswrite(TMP_CERT, $data, $n);
+      }
+   }
+
+   close( TMP_CERT );
+}
diff --git a/openssl/Netware/globals.txt b/openssl/Netware/globals.txt
new file mode 100644
index 000000000..fe05d390c
--- /dev/null
+++ b/openssl/Netware/globals.txt
@@ -0,0 +1,254 @@
+An initial review of the OpenSSL code was done to determine how many 
+global variables where present.  The idea was to determine the amount of 
+work required to pull the globals into an instance data structure in 
+order to build a Library NLM for NetWare.  This file contains the results 
+of the review.  Each file is listed along with the globals in the file.  
+The initial review was done very quickly so this list is probably
+not a comprehensive list.
+
+
+cryptlib.c
+===========================================
+
+static STACK *app_locks=NULL;
+
+static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
+
+static void (MS_FAR *locking_callback)(int mode,int type,
+   const char *file,int line)=NULL;
+static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
+   int type,const char *file,int line)=NULL;
+static unsigned long (MS_FAR *id_callback)(void)=NULL;
+static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
+   (const char *file,int line)=NULL;
+static void (MS_FAR *dynlock_lock_callback)(int mode,
+   struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
+static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
+   const char *file,int line)=NULL;
+
+
+mem.c
+===========================================
+static int allow_customize = 1;      /* we provide flexible functions for */
+static int allow_customize_debug = 1;/* exchanging memory-related functions at
+
+/* may be changed as long as `allow_customize' is set */
+static void *(*malloc_locked_func)(size_t)  = malloc;
+static void (*free_locked_func)(void *)     = free;
+static void *(*malloc_func)(size_t)         = malloc;
+static void *(*realloc_func)(void *, size_t)= realloc;
+static void (*free_func)(void *)            = free;
+
+/* use default functions from mem_dbg.c */
+static void (*malloc_debug_func)(void *,int,const char *,int,int)
+   = CRYPTO_dbg_malloc;
+static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
+   = CRYPTO_dbg_realloc;
+static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
+static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
+static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
+
+
+mem_dbg.c
+===========================================
+static int mh_mode=CRYPTO_MEM_CHECK_OFF;
+static unsigned long order = 0; /* number of memory requests */
+static LHASH *mh=NULL; /* hash-table of memory requests (address as key) */
+
+static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's */
+static long options =             /* extra information to be recorded */
+static unsigned long disabling_thread = 0;
+
+
+err.c
+===========================================
+static LHASH *error_hash=NULL;
+static LHASH *thread_hash=NULL;
+
+several files have routines with static "init" to track if error strings
+   have been loaded ( may not want seperate error strings for each process )
+   The "init" variable can't be left "global" because the error has is a ptr
+   that is malloc'ed.  The malloc'ed error has is dependant on the "init"
+   vars.
+
+   files:
+      pem_err.c
+      cpt_err.c
+      pk12err.c
+      asn1_err.c
+      bio_err.c
+      bn_err.c
+      buf_err.c
+      comp_err.c
+      conf_err.c
+      cpt_err.c
+      dh_err.c
+      dsa_err.c
+      dso_err.c
+      evp_err.c
+      obj_err.c
+      pkcs7err.c
+      rand_err.c
+      rsa_err.c
+      rsar_err.c
+      ssl_err.c
+      x509_err.c
+      v3err.c
+		err.c
+
+These file have similar "init" globals but they are for other stuff not
+error strings:
+
+		bn_lib.c
+		ecc_enc.c
+		s23_clnt.c
+		s23_meth.c
+		s23_srvr.c
+		s2_clnt.c
+		s2_lib.c
+		s2_meth.c
+		s2_srvr.c
+		s3_clnt.c
+		s3_lib.c
+		s3_srvr.c
+		t1_clnt.c
+		t1_meth.c
+		t1_srvr.c
+
+rand_lib.c
+===========================================
+static RAND_METHOD *rand_meth= &rand_ssleay_meth;
+
+md_rand.c
+===========================================
+static int state_num=0,state_index=0;
+static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
+static unsigned char md[MD_DIGEST_LENGTH];
+static long md_count[2]={0,0};
+static double entropy=0;
+static int initialized=0;
+
+/* This should be set to 1 only when ssleay_rand_add() is called inside
+   an already locked state, so it doesn't try to lock and thereby cause
+   a hang.  And it should always be reset back to 0 before unlocking. */
+static int add_do_not_lock=0;
+
+obj_dat.c
+============================================
+static int new_nid=NUM_NID;
+static LHASH *added=NULL;
+
+b_sock.c
+===========================================
+static unsigned long BIO_ghbn_hits=0L;
+static unsigned long BIO_ghbn_miss=0L;
+static struct ghbn_cache_st
+   {
+   char name[129];
+   struct hostent *ent;
+   unsigned long order;
+   } ghbn_cache[GHBN_NUM];
+
+static int wsa_init_done=0;
+
+
+bio_lib.c
+===========================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *bio_meth=NULL;
+static int bio_meth_num=0;
+
+
+bn_lib.c
+========================================
+static int bn_limit_bits=0;
+static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
+static int bn_limit_bits_low=0;
+static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
+static int bn_limit_bits_high=0;
+static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
+static int bn_limit_bits_mont=0;
+static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
+
+conf_lib.c
+========================================
+static CONF_METHOD *default_CONF_method=NULL;
+
+dh_lib.c
+========================================
+static DH_METHOD *default_DH_method;
+static int dh_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
+
+dsa_lib.c
+========================================
+static DSA_METHOD *default_DSA_method;
+static int dsa_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
+
+dso_lib.c
+========================================
+static DSO_METHOD *default_DSO_meth = NULL;
+
+rsa_lib.c
+========================================
+static RSA_METHOD *default_RSA_meth=NULL;
+static int rsa_meth_num=0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *rsa_meth=NULL;
+
+x509_trs.c
+=======================================
+static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
+static STACK_OF(X509_TRUST) *trtable = NULL;
+
+x509_req.c
+=======================================
+static int *ext_nids = ext_nid_list;
+
+o_names.c
+======================================
+static LHASH *names_lh=NULL;
+static STACK_OF(NAME_FUNCS) *name_funcs_stack;
+static int free_type;
+static int names_type_num=OBJ_NAME_TYPE_NUM;
+
+
+th-lock.c - NEED to add support for locking for NetWare
+==============================================
+static long *lock_count;
+(other platform specific globals)
+
+x_x509.c
+==============================================
+static int x509_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_meth = NULL;
+
+
+evp_pbe.c
+============================================
+static STACK *pbe_algs;
+
+evp_key.c
+============================================
+static char prompt_string[80];
+
+ssl_ciph.c
+============================================
+static STACK_OF(SSL_COMP) *ssl_comp_methods=NULL;
+
+ssl_lib.c
+=============================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_meth=NULL;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_ctx_meth=NULL;
+static int ssl_meth_num=0;
+static int ssl_ctx_meth_num=0;
+
+ssl_sess.c
+=============================================
+static int ssl_session_num=0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_session_meth=NULL;
+
+x509_vfy.c
+============================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_store_ctx_method=NULL;
+static int x509_store_ctx_num=0;
+
diff --git a/openssl/Netware/readme.txt b/openssl/Netware/readme.txt
new file mode 100644
index 000000000..a5b5faae3
--- /dev/null
+++ b/openssl/Netware/readme.txt
@@ -0,0 +1,19 @@
+
+Contents of the openssl\netware directory
+==========================================
+
+Regular files:
+
+readme.txt     - this file
+do_tests.pl    - perl script used to run the OpenSSL tests on NetWare
+cpy_tests.bat  - batch to to copy test stuff to NetWare server
+build.bat      - batch file to help with builds
+set_env.bat    - batch file to help setup build environments
+globals.txt    - results of initial code review to identify OpenSSL global variables
+
+
+The following files are generated by the various scripts.  They are
+recreated each time and it is okay to delete them.
+
+*.def - command files used by Metrowerks linker
+*.mak - make files generated by mk1mf.pl
diff --git a/openssl/Netware/set_env.bat b/openssl/Netware/set_env.bat
new file mode 100644
index 000000000..ace024e52
--- /dev/null
+++ b/openssl/Netware/set_env.bat
@@ -0,0 +1,112 @@
+@echo off
+
+rem ========================================================================
+rem   Batch file to assist in setting up the necessary enviroment for
+rem   building OpenSSL for NetWare.
+rem
+rem   usage:
+rem      set_env [target]
+rem
+rem      target      - "netware-clib" - Clib build
+rem                  - "netware-libc" - LibC build
+rem
+rem
+
+if "a%1" == "a" goto usage
+               
+set LIBC_BUILD=
+set CLIB_BUILD=
+set GNUC=
+
+if "%1" == "netware-clib" set CLIB_BUILD=Y
+if "%1" == "netware-clib" set LIBC_BUILD=
+
+if "%1" == "netware-libc" set LIBC_BUILD=Y
+if "%1" == "netware-libc" set CLIB_BUILD=
+
+if "%2" == "gnuc" set GNUC=Y
+if "%2" == "codewarrior" set GNUC=
+
+rem   Location of tools (compiler, linker, etc)
+if "%NDKBASE%" == "" set NDKBASE=c:\Novell
+
+rem   If Perl for Win32 is not already in your path, add it here
+set PERL_PATH=
+
+rem   Define path to the Metrowerks command line tools
+rem   or GNU Crosscompiler gcc / nlmconv
+rem   ( compiler, assembler, linker)
+if "%GNUC%" == "Y" set COMPILER_PATH=c:\usr\i586-netware\bin;c:\usr\bin
+if "%GNUC%" == "" set COMPILER_PATH=c:\prg\cwcmdl40
+
+rem   If using gnu make define path to utility
+rem set GNU_MAKE_PATH=%NDKBASE%\gnu
+set GNU_MAKE_PATH=c:\prg\tools
+
+rem   If using ms nmake define path to nmake
+rem set MS_NMAKE_PATH=%NDKBASE%\msvc\600\bin
+
+rem   If using NASM assembler define path
+rem set NASM_PATH=%NDKBASE%\nasm
+set NASM_PATH=c:\prg\tools
+
+rem   Update path to include tool paths
+set path=%path%;%COMPILER_PATH%
+if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
+if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
+if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
+if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
+
+rem   Set INCLUDES to location of Novell NDK includes
+if "%LIBC_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\libc\include;%NDKBASE%\ndk\libc\include\winsock
+if "%CLIB_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\nwsdk\include\nlm;%NDKBASE%\ws295sdk\include
+
+rem   Set Imports to location of Novell NDK import files
+if "%LIBC_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\libc\imports
+if "%CLIB_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\nwsdk\imports
+
+rem   Set PRELUDE to the absolute path of the prelude object to link with in
+rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "clibpre.o" is 
+rem   recommended, for LibC NKS builds libcpre.o must be used
+if "%GNUC%" == "Y" goto gnuc
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.o
+echo using MetroWerks CodeWarrior 
+goto info
+
+:gnuc
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.gcc.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.gcc.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.gcc.o
+echo using GNU GCC Compiler 
+
+:info
+echo.
+
+if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
+if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
+
+if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
+if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
+
+goto end
+
+:usage
+rem ===============================================================
+echo.
+echo No target build specified!
+echo.
+echo usage: set_env [target] [compiler]
+echo.
+echo target      - "netware-clib" - Clib build
+echo             - "netware-libc" - LibC build
+echo.
+echo compiler    - "gnuc"         - GNU GCC Compiler
+echo             - "codewarrior"  - MetroWerks CodeWarrior (default)
+echo.
+
+:end
+echo.
+
+