Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 101 insertions, 0 deletions

diff --git a/openssl/doc/crypto/PKCS7_sign.pod b/openssl/doc/crypto/PKCS7_sign.pod
new file mode 100644
index 000000000..ffd0c734b
--- /dev/null
+++ b/openssl/doc/crypto/PKCS7_sign.pod
@@ -0,0 +1,101 @@
+=pod
+
+=head1 NAME
+
+PKCS7_sign - create a PKCS#7 signedData structure
+
+=head1 SYNOPSIS
+
+PKCS7 *PKCS7_sign(X509 *signcert, EVP_PKEY *pkey, STACK_OF(X509) *certs, BIO *data, int flags);
+
+=head1 DESCRIPTION
+
+PKCS7_sign() creates and returns a PKCS#7 signedData structure. B<signcert>
+is the certificate to sign with, B<pkey> is the corresponsding private key.
+B<certs> is an optional additional set of certificates to include in the
+PKCS#7 structure (for example any intermediate CAs in the chain). 
+
+The data to be signed is read from BIO B<data>.
+
+B<flags> is an optional set of flags.
+
+=head1 NOTES
+
+Any of the following flags (ored together) can be passed in the B<flags> parameter.
+
+Many S/MIME clients expect the signed content to include valid MIME headers. If
+the B<PKCS7_TEXT> flag is set MIME headers for type B<text/plain> are prepended
+to the data.
+
+If B<PKCS7_NOCERTS> is set the signer's certificate will not be included in the
+PKCS7 structure, the signer's certificate must still be supplied in the B<signcert>
+parameter though. This can reduce the size of the signature if the signers certificate
+can be obtained by other means: for example a previously signed message.
+
+The data being signed is included in the PKCS7 structure, unless B<PKCS7_DETACHED> 
+is set in which case it is omitted. This is used for PKCS7 detached signatures
+which are used in S/MIME plaintext signed messages for example.
+
+Normally the supplied content is translated into MIME canonical format (as required
+by the S/MIME specifications) if B<PKCS7_BINARY> is set no translation occurs. This
+option should be used if the supplied data is in binary format otherwise the translation
+will corrupt it.
+
+The signedData structure includes several PKCS#7 autenticatedAttributes including
+the signing time, the PKCS#7 content type and the supported list of ciphers in
+an SMIMECapabilities attribute. If B<PKCS7_NOATTR> is set then no authenticatedAttributes
+will be used. If B<PKCS7_NOSMIMECAP> is set then just the SMIMECapabilities are
+omitted.
+
+If present the SMIMECapabilities attribute indicates support for the following
+algorithms: triple DES, 128 bit RC2, 64 bit RC2, DES and 40 bit RC2. If any
+of these algorithms is disabled then it will not be included.
+
+If the flags B<PKCS7_PARTSIGN> is set then the returned B<PKCS7> structure
+is just initialized ready to perform the signing operation. The signing
+is however B<not> performed and the data to be signed is not read from
+the B<data> parameter. Signing is deferred until after the data has been
+written. In this way data can be signed in a single pass. Currently the
+flag B<PKCS7_DETACHED> B<must> also be set.
+
+=head1 NOTES
+
+Currently the flag B<PKCS7_PARTSIGN> is only supported for detached
+data. If this flag is set the returned B<PKCS7> structure is B<not>
+complete and outputting its contents via a function that does not
+properly finalize the B<PKCS7> structure will give unpredictable 
+results.
+
+At present only the SMIME_write_PKCS7() function properly finalizes the
+structure.
+
+=head1 BUGS
+
+PKCS7_sign() is somewhat limited. It does not support multiple signers, some
+advanced attributes such as counter signatures are not supported.
+
+The SHA1 digest algorithm is currently always used.
+
+When the signed data is not detached it will be stored in memory within the
+B<PKCS7> structure. This effectively limits the size of messages which can be
+signed due to memory restraints. There should be a way to sign data without
+having to hold it all in memory, this would however require fairly major
+revisions of the OpenSSL ASN1 code.
+
+
+=head1 RETURN VALUES
+
+PKCS7_sign() returns either a valid PKCS7 structure or NULL if an error occurred.
+The error can be obtained from ERR_get_error(3).
+
+=head1 SEE ALSO
+
+L<ERR_get_error(3)|ERR_get_error(3)>, L<PKCS7_verify(3)|PKCS7_verify(3)>
+
+=head1 HISTORY
+
+PKCS7_sign() was added to OpenSSL 0.9.5
+
+The B<PKCS7_PARTSIGN> flag was added in OpenSSL 0.9.8
+
+=cut