Update to openssl-1.0.2c

Conflicts:
	openssl/Makefile

16 files changed, 199 insertions, 86 deletions

diff --git a/openssl/doc/apps/ciphers.pod b/openssl/doc/apps/ciphers.pod
index e9280bc50..1c26e3b3d 100644
--- a/openssl/doc/apps/ciphers.pod
+++ b/openssl/doc/apps/ciphers.pod
@@ -365,10 +365,8 @@ e.g. DES-CBC3-SHA. In these cases, RSA authentication is used.
  SSL_RSA_WITH_DES_CBC_SHA                DES-CBC-SHA
  SSL_RSA_WITH_3DES_EDE_CBC_SHA           DES-CBC3-SHA
 
- SSL_DH_DSS_EXPORT_WITH_DES40_CBC_SHA    EXP-DH-DSS-DES-CBC-SHA
  SSL_DH_DSS_WITH_DES_CBC_SHA             DH-DSS-DES-CBC-SHA
  SSL_DH_DSS_WITH_3DES_EDE_CBC_SHA        DH-DSS-DES-CBC3-SHA
- SSL_DH_RSA_EXPORT_WITH_DES40_CBC_SHA    EXP-DH-RSA-DES-CBC-SHA
  SSL_DH_RSA_WITH_DES_CBC_SHA             DH-RSA-DES-CBC-SHA
  SSL_DH_RSA_WITH_3DES_EDE_CBC_SHA        DH-RSA-DES-CBC3-SHA
  SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA   EXP-EDH-DSS-DES-CBC-SHA
diff --git a/openssl/doc/apps/cms.pod b/openssl/doc/apps/cms.pod
index 76dbf2ca3..4eaedbcd3 100644
--- a/openssl/doc/apps/cms.pod
+++ b/openssl/doc/apps/cms.pod
@@ -35,6 +35,7 @@ B<openssl> B<cms>
 [B<-print>]
 [B<-CAfile file>]
 [B<-CApath dir>]
+[B<-no_alt_chains>]
 [B<-md digest>]
 [B<-[cipher]>]
 [B<-nointern>]
@@ -419,7 +420,7 @@ portion of a message so they may be included manually. If signing
 then many S/MIME mail clients check the signers certificate's email
 address matches that specified in the From: address.
 
-=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig>
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig -no_alt_chains>
 
 Set various certificate chain valiadition option. See the
 L<B<verify>|verify(1)> manual page for details.
@@ -655,4 +656,6 @@ Support for RSA-OAEP and RSA-PSS was first added to OpenSSL 1.1.0.
 The use of non-RSA keys with B<-encrypt> and B<-decrypt> was first added
 to OpenSSL 1.1.0.
 
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
 =cut
diff --git a/openssl/doc/apps/config.pod b/openssl/doc/apps/config.pod
index d5cce54f4..e12591528 100644
--- a/openssl/doc/apps/config.pod
+++ b/openssl/doc/apps/config.pod
@@ -277,6 +277,59 @@ priority and B</tmp> used if neither is defined:
  # The above value is used if TEMP isn't in the environment
  tmpfile=${ENV::TEMP}/tmp.filename
 
+Simple OpenSSL library configuration example to enter FIPS mode:
+
+ # Default appname: should match "appname" parameter (if any)
+ # supplied to CONF_modules_load_file et al.
+ openssl_conf = openssl_conf_section
+
+ [openssl_conf_section]
+ # Configuration module list
+ alg_section = evp_sect
+
+ [evp_sect]
+ # Set to "yes" to enter FIPS mode if supported
+ fips_mode = yes
+
+Note: in the above example you will get an error in non FIPS capable versions
+of OpenSSL.
+
+More complex OpenSSL library configuration. Add OID and don't enter FIPS mode:
+
+ # Default appname: should match "appname" parameter (if any)
+ # supplied to CONF_modules_load_file et al.
+ openssl_conf = openssl_conf_section
+
+ [openssl_conf_section]
+ # Configuration module list
+ alg_section = evp_sect
+ oid_section = new_oids
+
+ [evp_sect]
+ # This will have no effect as FIPS mode is off by default.
+ # Set to "yes" to enter FIPS mode, if supported
+ fips_mode = no
+
+ [new_oids]
+ # New OID, just short name
+ newoid1 = 1.2.3.4.1
+ # New OID shortname and long name
+ newoid2 = New OID 2 long name, 1.2.3.4.2
+
+The above examples can be used with with any application supporting library
+configuration if "openssl_conf" is modified to match the appropriate "appname".
+
+For example if the second sample file above is saved to "example.cnf" then
+the command line:
+
+ OPENSSL_CONF=example.cnf openssl asn1parse -genstr OID:1.2.3.4.1
+
+will output:
+
+    0:d=0  hl=2 l=   4 prim: OBJECT            :newoid1
+
+showing that the OID "newoid1" has been added as "1.2.3.4.1".
+
 =head1 BUGS
 
 Currently there is no way to include characters using the octal B<\nnn>
diff --git a/openssl/doc/apps/dhparam.pod b/openssl/doc/apps/dhparam.pod
index 6e27cf5c1..1cd4c7666 100644
--- a/openssl/doc/apps/dhparam.pod
+++ b/openssl/doc/apps/dhparam.pod
@@ -71,8 +71,10 @@ check if the parameters are valid primes and generator.
 
 =item B<-2>, B<-5>
 
-The generator to use, either 2 or 5. 2 is the default. If present then the
-input file is ignored and parameters are generated instead.
+The generator to use, either 2 or 5. If present then the
+input file is ignored and parameters are generated instead. If not
+present but B<numbits> is present, parameters are generated with the
+default generator 2.
 
 =item B<-rand> I<file(s)>
 
@@ -85,9 +87,10 @@ all others.
 =item I<numbits>
 
 this option specifies that a parameter set should be generated of size
-I<numbits>. It must be the last option. If not present then a value of 512
-is used. If this option is present then the input file is ignored and 
-parameters are generated instead.
+I<numbits>. It must be the last option. If this option is present then
+the input file is ignored and parameters are generated instead. If
+this option is not present but a generator (B<-2> or B<-5>) is
+present, parameters are generated with a default length of 2048 bits.
 
 =item B<-noout>
 
diff --git a/openssl/doc/apps/ocsp.pod b/openssl/doc/apps/ocsp.pod
index 2372b373c..4639502a0 100644
--- a/openssl/doc/apps/ocsp.pod
+++ b/openssl/doc/apps/ocsp.pod
@@ -29,6 +29,7 @@ B<openssl> B<ocsp>
 [B<-path>]
 [B<-CApath dir>]
 [B<-CAfile file>]
+[B<-no_alt_chains>]]
 [B<-VAfile file>]
 [B<-validity_period n>]
 [B<-status_age n>]
@@ -143,6 +144,10 @@ connection timeout to the OCSP responder in seconds
 file or pathname containing trusted CA certificates. These are used to verify
 the signature on the OCSP response.
 
+=item B<-no_alt_chains>
+
+See L<B<verify>|verify(1)> manual page for details.
+
 =item B<-verify_other file>
 
 file containing additional certificates to search when attempting to locate
@@ -379,3 +384,9 @@ second file.
 
  openssl ocsp -index demoCA/index.txt -rsigner rcert.pem -CA demoCA/cacert.pem
      -reqin req.der -respout resp.der
+
+=head1 HISTORY
+
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
+=cut
diff --git a/openssl/doc/apps/s_client.pod b/openssl/doc/apps/s_client.pod
index aad59b181..84d052706 100644
--- a/openssl/doc/apps/s_client.pod
+++ b/openssl/doc/apps/s_client.pod
@@ -19,6 +19,7 @@ B<openssl> B<s_client>
 [B<-pass arg>]
 [B<-CApath directory>]
 [B<-CAfile filename>]
+[B<-no_alt_chains>]
 [B<-reconnect>]
 [B<-pause>]
 [B<-showcerts>]
@@ -120,7 +121,7 @@ also used when building the client certificate chain.
 A file containing trusted certificates to use during server authentication
 and to use when attempting to build the client certificate chain.
 
-=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig>
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig -no_alt_chains>
 
 Set various certificate chain valiadition option. See the
 L<B<verify>|verify(1)> manual page for details.
@@ -361,4 +362,8 @@ information whenever a session is renegotiated.
 
 L<sess_id(1)|sess_id(1)>, L<s_server(1)|s_server(1)>, L<ciphers(1)|ciphers(1)>
 
+=head1 HISTORY
+
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
 =cut
diff --git a/openssl/doc/apps/s_server.pod b/openssl/doc/apps/s_server.pod
index b37f410fb..baca77924 100644
--- a/openssl/doc/apps/s_server.pod
+++ b/openssl/doc/apps/s_server.pod
@@ -33,6 +33,7 @@ B<openssl> B<s_server>
 [B<-state>]
 [B<-CApath directory>]
 [B<-CAfile filename>]
+[B<-no_alt_chains>]
 [B<-nocert>]
 [B<-cipher cipherlist>]
 [B<-serverpref>]
@@ -174,6 +175,10 @@ and to use when attempting to build the server certificate chain. The list
 is also used in the list of acceptable client CAs passed to the client when
 a certificate is requested.
 
+=item B<-no_alt_chains>
+
+See the L<B<verify>|verify(1)> manual page for details.
+
 =item B<-state>
 
 prints out the SSL session states.
@@ -406,4 +411,8 @@ unknown cipher suites a client says it supports.
 
 L<sess_id(1)|sess_id(1)>, L<s_client(1)|s_client(1)>, L<ciphers(1)|ciphers(1)>
 
+=head1 HISTORY
+
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
 =cut
diff --git a/openssl/doc/apps/smime.pod b/openssl/doc/apps/smime.pod
index d39a59a90..d5618c8ff 100644
--- a/openssl/doc/apps/smime.pod
+++ b/openssl/doc/apps/smime.pod
@@ -15,6 +15,7 @@ B<openssl> B<smime>
 [B<-pk7out>]
 [B<-[cipher]>]
 [B<-in file>]
+[B<-no_alt_chains>]
 [B<-certfile file>]
 [B<-signer file>]
 [B<-recip  file>]
@@ -259,7 +260,7 @@ portion of a message so they may be included manually. If signing
 then many S/MIME mail clients check the signers certificate's email
 address matches that specified in the From: address.
 
-=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig>
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig -no_alt_chains>
 
 Set various options of certificate chain verification. See
 L<B<verify>|verify(1)> manual page for details.
@@ -441,5 +442,6 @@ structures may cause parsing errors.
 The use of multiple B<-signer> options and the B<-resign> command were first
 added in OpenSSL 1.0.0
 
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
 
 =cut
diff --git a/openssl/doc/apps/verify.pod b/openssl/doc/apps/verify.pod
index df0153435..df1b86dfe 100644
--- a/openssl/doc/apps/verify.pod
+++ b/openssl/doc/apps/verify.pod
@@ -25,6 +25,7 @@ B<openssl> B<verify>
 [B<-extended_crl>]
 [B<-use_deltas>]
 [B<-policy_print>]
+[B<-no_alt_chains>]
 [B<-untrusted file>]
 [B<-help>]
 [B<-issuer_checks>]
@@ -124,6 +125,14 @@ Set policy variable inhibit-any-policy (see RFC5280).
 
 Set policy variable inhibit-policy-mapping (see RFC5280).
 
+=item B<-no_alt_chains>
+
+When building a certificate chain, if the first certificate chain found is not
+trusted, then OpenSSL will continue to check to see if an alternative chain can
+be found that is trusted. With this option that behaviour is suppressed so that
+only the first chain found is ever used. Using this option will force the
+behaviour to match that of previous OpenSSL versions.
+
 =item B<-policy_print>
 
 Print out diagnostics related to policy processing.
@@ -425,4 +434,8 @@ B<20 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY> error codes.
 
 L<x509(1)|x509(1)>
 
+=head1 HISTORY
+
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
 =cut
diff --git a/openssl/doc/crypto/BN_rand.pod b/openssl/doc/crypto/BN_rand.pod
index d6b975ccf..bd6bc8632 100644
--- a/openssl/doc/crypto/BN_rand.pod
+++ b/openssl/doc/crypto/BN_rand.pod
@@ -24,7 +24,8 @@ most significant bit of the random number can be zero. If B<top> is 0,
 it is set to 1, and if B<top> is 1, the two most significant bits of
 the number will be set to 1, so that the product of two such random
 numbers will always have 2*B<bits> length.  If B<bottom> is true, the
-number will be odd.
+number will be odd. The value of B<bits> must be zero or greater. If B<bits> is
+1 then B<top> cannot also be 1.
 
 BN_pseudo_rand() does the same, but pseudo-random numbers generated by
 this function are not necessarily unpredictable. They can be used for
diff --git a/openssl/doc/crypto/BN_set_bit.pod b/openssl/doc/crypto/BN_set_bit.pod
index b7c47b9b0..a32cca2ce 100644
--- a/openssl/doc/crypto/BN_set_bit.pod
+++ b/openssl/doc/crypto/BN_set_bit.pod
@@ -37,12 +37,12 @@ BN_mask_bits() truncates B<a> to an B<n> bit number
 shorter than B<n> bits.
 
 BN_lshift() shifts B<a> left by B<n> bits and places the result in
-B<r> (C<r=a*2^n>). BN_lshift1() shifts B<a> left by one and places
-the result in B<r> (C<r=2*a>).
+B<r> (C<r=a*2^n>). Note that B<n> must be non-negative. BN_lshift1() shifts
+B<a> left by one and places the result in B<r> (C<r=2*a>).
 
 BN_rshift() shifts B<a> right by B<n> bits and places the result in
-B<r> (C<r=a/2^n>). BN_rshift1() shifts B<a> right by one and places
-the result in B<r> (C<r=a/2>).
+B<r> (C<r=a/2^n>). Note that B<n> must be non-negative. BN_rshift1() shifts
+B<a> right by one and places the result in B<r> (C<r=a/2>).
 
 For the shift functions, B<r> and B<a> may be the same variable.
 
diff --git a/openssl/doc/crypto/EVP_BytesToKey.pod b/openssl/doc/crypto/EVP_BytesToKey.pod
index 5d6059528..a9b6bb0c7 100644
--- a/openssl/doc/crypto/EVP_BytesToKey.pod
+++ b/openssl/doc/crypto/EVP_BytesToKey.pod
@@ -36,8 +36,8 @@ If the total key and IV length is less than the digest length and
 B<MD5> is used then the derivation algorithm is compatible with PKCS#5 v1.5
 otherwise a non standard extension is used to derive the extra data.
 
-Newer applications should use more standard algorithms such as PBKDF2 as
-defined in PKCS#5v2.1 for key derivation.
+Newer applications should use a more modern algorithm such as PBKDF2 as
+defined in PKCS#5v2.1 and provided by PKCS5_PBKDF2_HMAC.
 
 =head1 KEY DERIVATION ALGORITHM
 
diff --git a/openssl/doc/crypto/X509_VERIFY_PARAM_set_flags.pod b/openssl/doc/crypto/X509_VERIFY_PARAM_set_flags.pod
index 347d48dfe..44792f91a 100644
--- a/openssl/doc/crypto/X509_VERIFY_PARAM_set_flags.pod
+++ b/openssl/doc/crypto/X509_VERIFY_PARAM_set_flags.pod
@@ -197,6 +197,12 @@ verification. If this flag is set then additional status codes will be sent
 to the verification callback and it B<must> be prepared to handle such cases
 without assuming they are hard errors.
 
+The B<X509_V_FLAG_NO_ALT_CHAINS> flag suppresses checking for alternative
+chains. By default, when building a certificate chain, if the first certificate
+chain found is not trusted, then OpenSSL will continue to check to see if an
+alternative chain can be found that is trusted. With this flag set the behaviour
+will match that of OpenSSL versions prior to 1.0.2b.
+
 =head1 NOTES
 
 The above functions should be used to manipulate verification parameters
@@ -233,6 +239,6 @@ L<X509_check_ip(3)|X509_check_ip(3)>
 
 =head1 HISTORY
 
-TBA
+The B<X509_V_FLAG_NO_ALT_CHAINS> flag was added in OpenSSL 1.0.2b
 
 =cut
diff --git a/openssl/doc/crypto/pem.pod b/openssl/doc/crypto/pem.pod
index 21e9fe3b9..763eb6f53 100644
--- a/openssl/doc/crypto/pem.pod
+++ b/openssl/doc/crypto/pem.pod
@@ -2,7 +2,29 @@
 
 =head1 NAME
 
-PEM, PEM_read_bio_PrivateKey, PEM_read_PrivateKey, PEM_write_bio_PrivateKey, PEM_write_PrivateKey, PEM_write_bio_PKCS8PrivateKey, PEM_write_PKCS8PrivateKey, PEM_write_bio_PKCS8PrivateKey_nid, PEM_write_PKCS8PrivateKey_nid, PEM_read_bio_PUBKEY, PEM_read_PUBKEY, PEM_write_bio_PUBKEY, PEM_write_PUBKEY, PEM_read_bio_RSAPrivateKey, PEM_read_RSAPrivateKey, PEM_write_bio_RSAPrivateKey, PEM_write_RSAPrivateKey, PEM_read_bio_RSAPublicKey, PEM_read_RSAPublicKey, PEM_write_bio_RSAPublicKey, PEM_write_RSAPublicKey, PEM_read_bio_RSA_PUBKEY, PEM_read_RSA_PUBKEY, PEM_write_bio_RSA_PUBKEY, PEM_write_RSA_PUBKEY, PEM_read_bio_DSAPrivateKey, PEM_read_DSAPrivateKey, PEM_write_bio_DSAPrivateKey, PEM_write_DSAPrivateKey, PEM_read_bio_DSA_PUBKEY, PEM_read_DSA_PUBKEY, PEM_write_bio_DSA_PUBKEY, PEM_write_DSA_PUBKEY, PEM_read_bio_DSAparams, PEM_read_DSAparams, PEM_write_bio_DSAparams, PEM_write_DSAparams, PEM_read_bio_DHparams, PEM_read_DHparams, PEM_write_bio_DHparams, PEM_write_DHparams, PEM_read_bio_X509, PEM_read_X509, PEM_write_bio_X509, PEM_write_X509, PEM_read_bio_X509_AUX, PEM_read_X509_AUX, PEM_write_bio_X509_AUX, PEM_write_X509_AUX, PEM_read_bio_X509_REQ, PEM_read_X509_REQ, PEM_write_bio_X509_REQ, PEM_write_X509_REQ, PEM_write_bio_X509_REQ_NEW, PEM_write_X509_REQ_NEW, PEM_read_bio_X509_CRL, PEM_read_X509_CRL, PEM_write_bio_X509_CRL, PEM_write_X509_CRL, PEM_read_bio_PKCS7, PEM_read_PKCS7, PEM_write_bio_PKCS7, PEM_write_PKCS7, PEM_read_bio_NETSCAPE_CERT_SEQUENCE, PEM_read_NETSCAPE_CERT_SEQUENCE, PEM_write_bio_NETSCAPE_CERT_SEQUENCE, PEM_write_NETSCAPE_CERT_SEQUENCE - PEM routines
+PEM, PEM_read_bio_PrivateKey, PEM_read_PrivateKey, PEM_write_bio_PrivateKey,
+PEM_write_PrivateKey, PEM_write_bio_PKCS8PrivateKey, PEM_write_PKCS8PrivateKey,
+PEM_write_bio_PKCS8PrivateKey_nid, PEM_write_PKCS8PrivateKey_nid,
+PEM_read_bio_PUBKEY, PEM_read_PUBKEY, PEM_write_bio_PUBKEY, PEM_write_PUBKEY,
+PEM_read_bio_RSAPrivateKey, PEM_read_RSAPrivateKey,
+PEM_write_bio_RSAPrivateKey, PEM_write_RSAPrivateKey,
+PEM_read_bio_RSAPublicKey, PEM_read_RSAPublicKey, PEM_write_bio_RSAPublicKey,
+PEM_write_RSAPublicKey, PEM_read_bio_RSA_PUBKEY, PEM_read_RSA_PUBKEY,
+PEM_write_bio_RSA_PUBKEY, PEM_write_RSA_PUBKEY, PEM_read_bio_DSAPrivateKey,
+PEM_read_DSAPrivateKey, PEM_write_bio_DSAPrivateKey, PEM_write_DSAPrivateKey,
+PEM_read_bio_DSA_PUBKEY, PEM_read_DSA_PUBKEY, PEM_write_bio_DSA_PUBKEY,
+PEM_write_DSA_PUBKEY, PEM_read_bio_DSAparams, PEM_read_DSAparams,
+PEM_write_bio_DSAparams, PEM_write_DSAparams, PEM_read_bio_DHparams,
+PEM_read_DHparams, PEM_write_bio_DHparams, PEM_write_DHparams,
+PEM_read_bio_X509, PEM_read_X509, PEM_write_bio_X509, PEM_write_X509,
+PEM_read_bio_X509_AUX, PEM_read_X509_AUX, PEM_write_bio_X509_AUX,
+PEM_write_X509_AUX, PEM_read_bio_X509_REQ, PEM_read_X509_REQ,
+PEM_write_bio_X509_REQ, PEM_write_X509_REQ, PEM_write_bio_X509_REQ_NEW,
+PEM_write_X509_REQ_NEW, PEM_read_bio_X509_CRL, PEM_read_X509_CRL,
+PEM_write_bio_X509_CRL, PEM_write_X509_CRL, PEM_read_bio_PKCS7, PEM_read_PKCS7,
+PEM_write_bio_PKCS7, PEM_write_PKCS7, PEM_read_bio_NETSCAPE_CERT_SEQUENCE,
+PEM_read_NETSCAPE_CERT_SEQUENCE, PEM_write_bio_NETSCAPE_CERT_SEQUENCE,
+PEM_write_NETSCAPE_CERT_SEQUENCE - PEM routines
 
 =head1 SYNOPSIS
 
@@ -239,7 +261,8 @@ SubjectPublicKeyInfo structure and an error occurs if the public
 key is not DSA.
 
 The B<DSAparams> functions process DSA parameters using a DSA
-structure. The parameters are encoded using a foobar structure.
+structure. The parameters are encoded using a Dss-Parms structure
+as defined in RFC2459.
 
 The B<DHparams> functions process DH parameters using a DH
 structure. The parameters are encoded using a PKCS#3 DHparameter
diff --git a/openssl/doc/ssl/SSL_COMP_add_compression_method.pod b/openssl/doc/ssl/SSL_COMP_add_compression_method.pod
index f4d191c9b..2bb440379 100644
--- a/openssl/doc/ssl/SSL_COMP_add_compression_method.pod
+++ b/openssl/doc/ssl/SSL_COMP_add_compression_method.pod
@@ -2,7 +2,7 @@
 
 =head1 NAME
 
-SSL_COMP_add_compression_method - handle SSL/TLS integrated compression methods
+SSL_COMP_add_compression_method, SSL_COMP_free_compression_methods - handle SSL/TLS integrated compression methods
 
 =head1 SYNOPSIS
 
@@ -10,6 +10,8 @@ SSL_COMP_add_compression_method - handle SSL/TLS integrated compression methods
 
  int SSL_COMP_add_compression_method(int id, COMP_METHOD *cm);
 
+ +void SSL_COMP_free_compression_methods(void);
+
 =head1 DESCRIPTION
 
 SSL_COMP_add_compression_method() adds the compression method B<cm> with
@@ -17,6 +19,10 @@ the identifier B<id> to the list of available compression methods. This
 list is globally maintained for all SSL operations within this application.
 It cannot be set for specific SSL_CTX or SSL objects.
 
+SSL_COMP_free_compression_methods() frees the internal table of
+compression methods that were built internally, and possibly
+augmented by adding SSL_COMP_add_compression_method().
+
 =head1 NOTES
 
 The TLS standard (or SSLv3) allows the integration of compression methods
@@ -38,8 +44,8 @@ its own compression methods and will unconditionally activate compression
 when a matching identifier is found. There is no way to restrict the list
 of compression methods supported on a per connection basis.
 
-The OpenSSL library has the compression methods B<COMP_rle()> and (when
-especially enabled during compilation) B<COMP_zlib()> available.
+If enabled during compilation, the OpenSSL library will have the
+COMP_zlib() compression method available.
 
 =head1 WARNINGS
 
diff --git a/openssl/doc/ssl/SSL_CTX_set_tmp_dh_callback.pod b/openssl/doc/ssl/SSL_CTX_set_tmp_dh_callback.pod
index 7a27eef50..b754c16a8 100644
--- a/openssl/doc/ssl/SSL_CTX_set_tmp_dh_callback.pod
+++ b/openssl/doc/ssl/SSL_CTX_set_tmp_dh_callback.pod
@@ -61,12 +61,12 @@ negotiation is being saved.
 
 If "strong" primes were used to generate the DH parameters, it is not strictly
 necessary to generate a new key for each handshake but it does improve forward
-secrecy. If it is not assured, that "strong" primes were used (see especially
-the section about DSA parameters below), SSL_OP_SINGLE_DH_USE must be used
-in order to prevent small subgroup attacks. Always using SSL_OP_SINGLE_DH_USE
-has an impact on the computer time needed during negotiation, but it is not
-very large, so application authors/users should consider to always enable
-this option.
+secrecy. If it is not assured that "strong" primes were used,
+SSL_OP_SINGLE_DH_USE must be used in order to prevent small subgroup
+attacks. Always using SSL_OP_SINGLE_DH_USE has an impact on the
+computer time needed during negotiation, but it is not very large, so
+application authors/users should consider always enabling this option.
+The option is required to implement perfect forward secrecy (PFS).
 
 As generating DH parameters is extremely time consuming, an application
 should not generate the parameters on the fly but supply the parameters.
@@ -74,82 +74,62 @@ DH parameters can be reused, as the actual key is newly generated during
 the negotiation. The risk in reusing DH parameters is that an attacker
 may specialize on a very often used DH group. Applications should therefore
 generate their own DH parameters during the installation process using the
-openssl L<dhparam(1)|dhparam(1)> application. In order to reduce the computer
-time needed for this generation, it is possible to use DSA parameters
-instead (see L<dhparam(1)|dhparam(1)>), but in this case SSL_OP_SINGLE_DH_USE
-is mandatory.
+openssl L<dhparam(1)|dhparam(1)> application. This application
+guarantees that "strong" primes are used.
 
-Application authors may compile in DH parameters. Files dh512.pem,
-dh1024.pem, dh2048.pem, and dh4096.pem in the 'apps' directory of current
+Files dh2048.pem, and dh4096.pem in the 'apps' directory of the current
 version of the OpenSSL distribution contain the 'SKIP' DH parameters,
 which use safe primes and were generated verifiably pseudo-randomly.
 These files can be converted into C code using the B<-C> option of the
-L<dhparam(1)|dhparam(1)> application.
-Authors may also generate their own set of parameters using
-L<dhparam(1)|dhparam(1)>, but a user may not be sure how the parameters were
-generated. The generation of DH parameters during installation is therefore
-recommended.
+L<dhparam(1)|dhparam(1)> application. Generation of custom DH
+parameters during installation should still be preferred to stop an
+attacker from specializing on a commonly used group. Files dh1024.pem
+and dh512.pem contain old parameters that must not be used by
+applications.
 
 An application may either directly specify the DH parameters or
-can supply the DH parameters via a callback function. The callback approach
-has the advantage, that the callback may supply DH parameters for different
-key lengths.
+can supply the DH parameters via a callback function.
 
-The B<tmp_dh_callback> is called with the B<keylength> needed and
-the B<is_export> information. The B<is_export> flag is set, when the
-ephemeral DH key exchange is performed with an export cipher.
+Previous versions of the callback used B<is_export> and B<keylength>
+parameters to control parameter generation for export and non-export
+cipher suites. Modern servers that do not support export ciphersuites
+are advised to either use SSL_CTX_set_tmp_dh() in combination with
+SSL_OP_SINGLE_DH_USE, or alternatively, use the callback but ignore
+B<keylength> and B<is_export> and simply supply at least 2048-bit
+parameters in the callback.
 
 =head1 EXAMPLES
 
-Handle DH parameters for key lengths of 512 and 1024 bits. (Error handling
+Setup DH parameters with a key length of 2048 bits. (Error handling
 partly left out.)
 
- ...
- /* Set up ephemeral DH stuff */
- DH *dh_512 = NULL;
- DH *dh_1024 = NULL;
- FILE *paramfile;
+ Command-line parameter generation:
+ $ openssl dhparam -out dh_param_2048.pem 2048
+
+ Code for setting up parameters during server initialization:
 
  ...
- /* "openssl dhparam -out dh_param_512.pem -2 512" */
- paramfile = fopen("dh_param_512.pem", "r");
+ SSL_CTX ctx = SSL_CTX_new();
+ ...
+
+ /* Set up ephemeral DH parameters. */
+ DH *dh_2048 = NULL;
+ FILE *paramfile;
+ paramfile = fopen("dh_param_2048.pem", "r");
  if (paramfile) {
-   dh_512 = PEM_read_DHparams(paramfile, NULL, NULL, NULL);
+   dh_2048 = PEM_read_DHparams(paramfile, NULL, NULL, NULL);
    fclose(paramfile);
+ } else {
+   /* Error. */
  }
- /* "openssl dhparam -out dh_param_1024.pem -2 1024" */
- paramfile = fopen("dh_param_1024.pem", "r");
- if (paramfile) {
-   dh_1024 = PEM_read_DHparams(paramfile, NULL, NULL, NULL);
-   fclose(paramfile);
+ if (dh_2048 == NULL) {
+  /* Error. */
  }
- ...
-
- /* "openssl dhparam -C -2 512" etc... */
- DH *get_dh512() { ... }
- DH *get_dh1024() { ... }
-
- DH *tmp_dh_callback(SSL *s, int is_export, int keylength)
- {
-    DH *dh_tmp=NULL;
-
-    switch (keylength) {
-    case 512:
-      if (!dh_512)
-        dh_512 = get_dh512();
-      dh_tmp = dh_512;
-      break;
-    case 1024:
-      if (!dh_1024)
-        dh_1024 = get_dh1024();
-      dh_tmp = dh_1024;
-      break;
-    default:
-      /* Generating a key on the fly is very costly, so use what is there */
-      setup_dh_parameters_like_above();
-    }
-    return(dh_tmp);
+ if (SSL_CTX_set_tmp_dh(ctx, dh_2048) != 1) {
+   /* Error. */
  }
+ SSL_CTX_set_options(ctx, SSL_OP_SINGLE_DH_USE);
+ ...
 
 =head1 RETURN VALUES