Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 294 insertions, 0 deletions

diff --git a/xorg-server/hw/xfree86/os-support/sco/sco_init.c b/xorg-server/hw/xfree86/os-support/sco/sco_init.c
new file mode 100644
index 000000000..5f7db3437
--- /dev/null
+++ b/xorg-server/hw/xfree86/os-support/sco/sco_init.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright 2001-2005 by J. Kean Johnston <jkj@sco.com>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name J. Kean Johnston not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission.  J. Kean Johnston makes no
+ * representations about the suitability of this software for any purpose.
+ * It is provided "as is" without express or implied warranty.
+ *
+ * J. KEAN JOHNSTON DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL J. KEAN JOHNSTON BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* Re-written May 2001 to represent the current state of reality */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <X11/X.h>
+#include <X11/Xmd.h>
+
+#include "compiler.h"
+
+#include "xf86.h"
+#include "xf86Priv.h"
+#include "xf86_OSlib.h"
+
+static Bool KeepTty = FALSE;
+static int VTnum = -1;
+static char vtdevice[48];
+static int sco_console_mode = -1;
+
+extern Bool mpxLock;
+
+void
+xf86OpenConsole(void)
+{
+  int i, ioctl_ret;
+  struct vt_mode VT;
+  struct vid_info vidinf;
+  struct sigaction sigvtsw;
+  char *ttn;
+
+  if (serverGeneration == 1) {
+    /* check if we're run with euid==0 */
+    if (geteuid() != 0) {
+      FatalError("xf86OpenConsole: Server must be setuid root\n");
+    }
+
+    /* If we are run in the background we will get SIGTTOU. Ignore it. */
+    OsSignal (SIGTTOU, SIG_IGN);
+
+    /*
+     * Set up the virtual terminal (multiscreen in SCO parlance).
+     * For the actual console itself, screens are numbered from
+     * 1 to (usually) 16. However, it is possible to have a nested
+     * server, and it is also possible to be on a multi-console
+     * system such as MaxSpeed or SunRiver. Therefore, we should
+     * not make any assumptions about the TTY name we are on, and
+     * instead we rely on ttyname() to give us the real TTY name.
+     * Previously, we tried to determine the TTY name manually.
+     * This is wrong. The only time we need to futz with the TTY name
+     * is if we were given the name of a TTY to run on explicity on
+     * the command line.
+     */
+
+    if (VTnum == -1) {
+      /*
+       * No device was specified. We need to query the kernel to see which
+       * console device we are on (and in fact if we are on a console at all).
+       */
+      ttn = ttyname (1);
+
+      if (ttn == (char *)0) {
+	FatalError ("xf86OpenConsole: Could not determine TTY name: %s\n",
+	  strerror(errno));
+      }
+      strlcpy (vtdevice, ttn, sizeof(vtdevice));
+    } else if (VTnum >= 0) {
+      snprintf (vtdevice, sizeof(vtdevice), "/dev/tty%02d", VTnum);
+    }
+
+    /*
+     * Now we can dispose of stdin/stdout
+     */
+    fclose (stdin);
+    fclose (stdout);
+
+    if ((xf86Info.consoleFd = open(vtdevice, O_RDWR | O_NDELAY, 0)) < 0) {
+      FatalError("xf86OpenConsole: Cannot open %s: %s\n", vtdevice,
+	strerror(errno));
+    }
+
+    /*
+     * We make 100% sure we use the correct VT number. This can get ugly
+     * where there are multi-consoles in use, so we make sure we query
+     * the kernel for the correct VT number. It knows best, we don't.
+     */
+    vidinf.size = sizeof(vidinf);
+    if (ioctl (xf86Info.consoleFd, CONS_GETINFO, &vidinf) < 0) {
+      FatalError ("xf86OpenConsole: %s not a console device "
+	"or error querying device: %s\n", vtdevice, strerror (errno));
+    }
+    xf86Info.vtno = vidinf.m_num;
+    VTnum = vidinf.m_num + 1; /* 0-based */
+
+    ErrorF("(using VT%02d device %s)\n\n", VTnum, vtdevice);
+
+    /* We activate the console just in case its not the one we are on */
+    if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, xf86Info.vtno) != 0) {
+        ErrorF("xf86OpenConsole: VT_ACTIVATE failed (%s)\n", strerror(errno));
+    }
+
+    /* Disassociate from controling TTY */
+    if (!KeepTty) {
+      setpgrp();
+    }
+
+    /*
+     * Now we get the current mode that the console device is in. We will
+     * use this later when we close the console device to restore it to
+     * that same mode.
+     */
+    if ((sco_console_mode = ioctl(xf86Info.consoleFd, CONS_GET, 0L)) < 0) {
+      FatalError("xf86OpenConsole: CONS_GET failed on console (%s)\n",
+          strerror(errno));
+    }
+
+    if (ioctl(xf86Info.consoleFd, VT_GETMODE, &VT) < 0) {
+      FatalError("xf86OpenConsole: VT_GETMODE failed (%s)\n", strerror(errno));
+    }
+
+    sigvtsw.sa_handler = xf86VTRequest;
+    sigfillset(&sigvtsw.sa_mask);
+    sigvtsw.sa_flags = 0;
+
+    /* NOTE: Using sigaction means we dont have to re-arm the signal */
+    sigaction(SIGUSR1, &sigvtsw, NULL);
+
+    VT.mode = VT_PROCESS;
+    VT.relsig = SIGUSR1;
+    VT.acqsig = SIGUSR1;
+    VT.frsig = SIGINT;          /* Not implemented */
+    VT.waitv = 0;
+
+    /*
+     * The SCO X server tries the following call 5 times. Lets do the same
+     * thing. It shouldn't really be required but sometimes things take a
+     * while to settle down when switching screens. *helpless shrug* I know
+     * its sucks but ...
+     */
+
+    ioctl_ret = 0;
+    for (i = 0; i < 5; i++) {
+      ioctl_ret = ioctl(xf86Info.consoleFd, VT_SETMODE, &VT);
+      if (ioctl_ret >= 0)
+        break;
+      usleep(999999); /* Dont use nap() - it forces linking with -lx */
+    }
+
+    if (ioctl_ret < 0) {
+      FatalError("xf86OpenConsole: VT_SETMODE failed (%s)\n", strerror(errno));
+    }
+
+    /*
+     * Convince the console driver we are in graphics mode.
+     */
+    if (ioctl(xf86Info.consoleFd, KDSETMODE, KD_GRAPHICS) < 0) {
+        ErrorF("Failed to set graphics mode (%s)\n", strerror(errno));
+    }
+  } else { /* serverGeneration != 1 */
+    if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, xf86Info.vtno) != 0) {
+      ErrorF("xf86OpenConsole: VT_ACTIVATE failed (%s)\n", strerror(errno));
+    }
+  }
+}
+
+/*
+ * Restore the console to its previous state. This may cause flicker if
+ * the screen was previous in a graphics mode, because we first set it
+ * to text mode. This has the advantage of getting the console driver
+ * to do a soft reset on the card, which really does help settle the
+ * video card down again after coming out of Xfree86.
+ */
+void
+xf86CloseConsole(void)
+{
+  struct vt_mode VT;
+  struct sigaction sigvtsw;
+
+  /* Set text mode (possibly briefly) */
+  ioctl(xf86Info.consoleFd, KDSETMODE, KD_TEXT0);
+
+  /* Restore the original mode */
+  if (sco_console_mode != -1) {
+      ioctl(xf86Info.consoleFd, MODESWITCH | sco_console_mode, 0L);
+  }
+
+  ioctl(xf86Info.consoleFd, VT_RELDISP, 1);     /* Release the display */
+
+  sigvtsw.sa_handler = SIG_DFL;
+  sigfillset(&sigvtsw.sa_mask);
+  sigvtsw.sa_flags = 0;
+
+  sigaction(SIGUSR1, &sigvtsw, NULL);
+
+  VT.mode = VT_AUTO;
+  VT.waitv = 0;
+  VT.relsig = SIGUSR1;
+  VT.acqsig = SIGUSR1;
+  VT.frsig  = SIGINT;
+  ioctl(xf86Info.consoleFd, VT_SETMODE, &VT); /* Revert to auto handling */
+
+  close(xf86Info.consoleFd); /* We're done with the device */
+}
+
+int
+xf86ProcessArgument(int argc, char *argv[], int i)
+{
+  /*
+   * Keep server from detaching from controlling tty.  This is useful
+   * when debugging (so the server can receive keyboard signals).
+   */
+  if (!strcmp(argv[i], "-keeptty")) {
+    KeepTty = TRUE;
+    return(1);
+  }
+
+  /*
+   * By default, the X server wants to bind itself to CPU 0. This makes
+   * sure that the server has full access to the I/O ports at IOPL 3.
+   * Some SMP systems have trouble with I/O on CPU's other than 0. If,
+   * however, you have a system that is well behaved, you can specify
+   * this argument and let the scheduler decide which CPU the server
+   * should run on.
+   */
+  if (!strcmp(argv[i], "-nompxlock")) {
+    mpxLock = FALSE;
+    return (1);
+  }
+
+  /*
+   * Specify the VT number to run on (NOT the device).
+   */
+  if ((argv[i][0] == 'v') && (argv[i][1] == 't')) {
+    if (sscanf(argv[i], "vt%2d", &VTnum) == 0) {
+      UseMsg();
+      VTnum = -1;
+      return(0);
+    }
+    if (VTnum <= 0) {
+      UseMsg();
+      VTnum = -1;
+      return(0);
+    }
+    return(1);
+  }
+
+  /*
+   * Use a device the user specifies.
+   */
+  if (!strcmp(argv[i], "-crt")) {
+    if (++i > argc) {
+      UseMsg();
+      VTnum = -1;
+      return(0);
+    } else {
+      VTnum = -2;
+      strlcpy (vtdevice, argv[i], sizeof(vtdevice));
+      return(2);
+    }
+  }
+  return(0);
+}
+
+void
+xf86UseMsg(void)
+{
+	ErrorF("vtXX                   use the specified VT number\n");
+	ErrorF("-crt DEVICE            use the specified VT device\n");
+        ErrorF("-nompxlock             dont bind X server to CPU 0\n");
+	ErrorF("-keeptty               ");
+	ErrorF("don't detach controlling tty (for debugging only)\n");
+}