aboutsummaryrefslogtreecommitdiff
path: root/zlib/doc
diff options
context:
space:
mode:
authormarha <marha@users.sourceforge.net>2012-06-22 15:53:45 +0200
committermarha <marha@users.sourceforge.net>2012-06-22 15:54:13 +0200
commit7baa3d795c87c11550f1686488c968320428cbf9 (patch)
tree4c932d59c53a0d358916a7c66af5103b8bf22813 /zlib/doc
parente1a407256a5c1571d8f4871fd981a51cfbd46e37 (diff)
downloadvcxsrv-7baa3d795c87c11550f1686488c968320428cbf9.tar.gz
vcxsrv-7baa3d795c87c11550f1686488c968320428cbf9.tar.bz2
vcxsrv-7baa3d795c87c11550f1686488c968320428cbf9.zip
Switch to zlib 1.2.7
Diffstat (limited to 'zlib/doc')
-rw-r--r--zlib/doc/algorithm.txt209
-rw-r--r--zlib/doc/rfc1950.txt619
-rw-r--r--zlib/doc/rfc1951.txt955
-rw-r--r--zlib/doc/rfc1952.txt675
-rw-r--r--zlib/doc/txtvsbin.txt107
5 files changed, 2565 insertions, 0 deletions
diff --git a/zlib/doc/algorithm.txt b/zlib/doc/algorithm.txt
new file mode 100644
index 000000000..c97f49502
--- /dev/null
+++ b/zlib/doc/algorithm.txt
@@ -0,0 +1,209 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data. The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length). Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes. (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The key question is how to represent a Huffman code (or any prefix code) so
+that you can decode fast. The most important characteristic is that shorter
+codes are much more common than longer codes, so pay attention to decoding the
+short codes fast, and let the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code. It gets that many bits from the
+stream, and looks it up in the table. The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table. If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code. However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table. What inflate() does is
+simply to make the number of bits in the first table a variable, and then
+to set that variable for the maximum speed.
+
+For inflate, which has 286 possible codes for the literal/length tree, the size
+of the first table is nine bits. Also the distance trees have 30 possible
+values, and the size of the first table is six bits. Note that for each of
+those cases, the table ended up one bit longer than the ``average'' code
+length, i.e. the code length of an approximately flat code which would be a
+little more than eight bits for 286 symbols and a little less than five bits
+for 30 symbols.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like. You are correct that it's not a Huffman tree. It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol. The
+symbol could be as short as one bit or as long as 15 bits. If a particular
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits. For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits. Again, there are duplicated
+entries as needed. The idea is that most of the time the symbol will be short
+and there will only be one table look up. (That's whole idea behind data
+compression in the first place.) For the less frequent long symbols, there
+will be two lookups. If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient. For
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble. Then you start again with the next
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is? The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols. At the
+other extreme, you could make a new table for every bit in the code. In fact,
+that's essentially a Huffman tree. But then you spend too much time
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode as and how many bits that is, i.e. how
+many bits to gobble. Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to
+be constructed. That's compared to 64 entries for a single table. Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table). Assuming that the code ideally represents the probability of
+the symbols, it takes on the average 1.25 lookups per symbol. That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the
+Huffman tree.
+
+There, I think that gives you a picture of what's going on. For inflate, the
+meaning of a particular symbol is often more than just a letter. It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value. Or it might be the special end-of-block code. The
+data structures created in inftrees.c try to encode all that information
+compactly in the tables.
+
+
+Jean-loup Gailly Mark Adler
+jloup@gzip.org madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+http://tools.ietf.org/html/rfc1951
diff --git a/zlib/doc/rfc1950.txt b/zlib/doc/rfc1950.txt
new file mode 100644
index 000000000..ce6428a0f
--- /dev/null
+++ b/zlib/doc/rfc1950.txt
@@ -0,0 +1,619 @@
+
+
+
+
+
+
+Network Working Group P. Deutsch
+Request for Comments: 1950 Aladdin Enterprises
+Category: Informational J-L. Gailly
+ Info-ZIP
+ May 1996
+
+
+ ZLIB Compressed Data Format Specification version 3.3
+
+Status of This Memo
+
+ This memo provides information for the Internet community. This memo
+ does not specify an Internet standard of any kind. Distribution of
+ this memo is unlimited.
+
+IESG Note:
+
+ The IESG takes no position on the validity of any Intellectual
+ Property Rights statements contained in this document.
+
+Notices
+
+ Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly
+
+ Permission is granted to copy and distribute this document for any
+ purpose and without charge, including translations into other
+ languages and incorporation into compilations, provided that the
+ copyright notice and this notice are preserved, and that any
+ substantive changes or deletions from the original are clearly
+ marked.
+
+ A pointer to the latest version of this and related documentation in
+ HTML format can be found at the URL
+ <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.
+
+Abstract
+
+ This specification defines a lossless compressed data format. The
+ data can be produced or consumed, even for an arbitrarily long
+ sequentially presented input data stream, using only an a priori
+ bounded amount of intermediate storage. The format presently uses
+ the DEFLATE compression method but can be easily extended to use
+ other compression methods. It can be implemented readily in a manner
+ not covered by patents. This specification also defines the ADLER-32
+ checksum (an extension and improvement of the Fletcher checksum),
+ used for detection of data corruption, and provides an algorithm for
+ computing it.
+
+
+
+
+Deutsch & Gailly Informational [Page 1]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+Table of Contents
+
+ 1. Introduction ................................................... 2
+ 1.1. Purpose ................................................... 2
+ 1.2. Intended audience ......................................... 3
+ 1.3. Scope ..................................................... 3
+ 1.4. Compliance ................................................ 3
+ 1.5. Definitions of terms and conventions used ................ 3
+ 1.6. Changes from previous versions ............................ 3
+ 2. Detailed specification ......................................... 3
+ 2.1. Overall conventions ....................................... 3
+ 2.2. Data format ............................................... 4
+ 2.3. Compliance ................................................ 7
+ 3. References ..................................................... 7
+ 4. Source code .................................................... 8
+ 5. Security Considerations ........................................ 8
+ 6. Acknowledgements ............................................... 8
+ 7. Authors' Addresses ............................................. 8
+ 8. Appendix: Rationale ............................................ 9
+ 9. Appendix: Sample code ..........................................10
+
+1. Introduction
+
+ 1.1. Purpose
+
+ The purpose of this specification is to define a lossless
+ compressed data format that:
+
+ * Is independent of CPU type, operating system, file system,
+ and character set, and hence can be used for interchange;
+
+ * Can be produced or consumed, even for an arbitrarily long
+ sequentially presented input data stream, using only an a
+ priori bounded amount of intermediate storage, and hence can
+ be used in data communications or similar structures such as
+ Unix filters;
+
+ * Can use a number of different compression methods;
+
+ * Can be implemented readily in a manner not covered by
+ patents, and hence can be practiced freely.
+
+ The data format defined by this specification does not attempt to
+ allow random access to compressed data.
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 2]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ 1.2. Intended audience
+
+ This specification is intended for use by implementors of software
+ to compress data into zlib format and/or decompress data from zlib
+ format.
+
+ The text of the specification assumes a basic background in
+ programming at the level of bits and other primitive data
+ representations.
+
+ 1.3. Scope
+
+ The specification specifies a compressed data format that can be
+ used for in-memory compression of a sequence of arbitrary bytes.
+
+ 1.4. Compliance
+
+ Unless otherwise indicated below, a compliant decompressor must be
+ able to accept and decompress any data set that conforms to all
+ the specifications presented here; a compliant compressor must
+ produce data sets that conform to all the specifications presented
+ here.
+
+ 1.5. Definitions of terms and conventions used
+
+ byte: 8 bits stored or transmitted as a unit (same as an octet).
+ (For this specification, a byte is exactly 8 bits, even on
+ machines which store a character on a number of bits different
+ from 8.) See below, for the numbering of bits within a byte.
+
+ 1.6. Changes from previous versions
+
+ Version 3.1 was the first public release of this specification.
+ In version 3.2, some terminology was changed and the Adler-32
+ sample code was rewritten for clarity. In version 3.3, the
+ support for a preset dictionary was introduced, and the
+ specification was converted to RFC style.
+
+2. Detailed specification
+
+ 2.1. Overall conventions
+
+ In the diagrams below, a box like this:
+
+ +---+
+ | | <-- the vertical bars might be missing
+ +---+
+
+
+
+
+Deutsch & Gailly Informational [Page 3]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ represents one byte; a box like this:
+
+ +==============+
+ | |
+ +==============+
+
+ represents a variable number of bytes.
+
+ Bytes stored within a computer do not have a "bit order", since
+ they are always treated as a unit. However, a byte considered as
+ an integer between 0 and 255 does have a most- and least-
+ significant bit, and since we write numbers with the most-
+ significant digit on the left, we also write bytes with the most-
+ significant bit on the left. In the diagrams below, we number the
+ bits of a byte so that bit 0 is the least-significant bit, i.e.,
+ the bits are numbered:
+
+ +--------+
+ |76543210|
+ +--------+
+
+ Within a computer, a number may occupy multiple bytes. All
+ multi-byte numbers in the format described here are stored with
+ the MOST-significant byte first (at the lower memory address).
+ For example, the decimal number 520 is stored as:
+
+ 0 1
+ +--------+--------+
+ |00000010|00001000|
+ +--------+--------+
+ ^ ^
+ | |
+ | + less significant byte = 8
+ + more significant byte = 2 x 256
+
+ 2.2. Data format
+
+ A zlib stream has the following structure:
+
+ 0 1
+ +---+---+
+ |CMF|FLG| (more-->)
+ +---+---+
+
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 4]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ (if FLG.FDICT set)
+
+ 0 1 2 3
+ +---+---+---+---+
+ | DICTID | (more-->)
+ +---+---+---+---+
+
+ +=====================+---+---+---+---+
+ |...compressed data...| ADLER32 |
+ +=====================+---+---+---+---+
+
+ Any data which may appear after ADLER32 are not part of the zlib
+ stream.
+
+ CMF (Compression Method and flags)
+ This byte is divided into a 4-bit compression method and a 4-
+ bit information field depending on the compression method.
+
+ bits 0 to 3 CM Compression method
+ bits 4 to 7 CINFO Compression info
+
+ CM (Compression method)
+ This identifies the compression method used in the file. CM = 8
+ denotes the "deflate" compression method with a window size up
+ to 32K. This is the method used by gzip and PNG (see
+ references [1] and [2] in Chapter 3, below, for the reference
+ documents). CM = 15 is reserved. It might be used in a future
+ version of this specification to indicate the presence of an
+ extra field before the compressed data.
+
+ CINFO (Compression info)
+ For CM = 8, CINFO is the base-2 logarithm of the LZ77 window
+ size, minus eight (CINFO=7 indicates a 32K window size). Values
+ of CINFO above 7 are not allowed in this version of the
+ specification. CINFO is not defined in this specification for
+ CM not equal to 8.
+
+ FLG (FLaGs)
+ This flag byte is divided as follows:
+
+ bits 0 to 4 FCHECK (check bits for CMF and FLG)
+ bit 5 FDICT (preset dictionary)
+ bits 6 to 7 FLEVEL (compression level)
+
+ The FCHECK value must be such that CMF and FLG, when viewed as
+ a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG),
+ is a multiple of 31.
+
+
+
+
+Deutsch & Gailly Informational [Page 5]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ FDICT (Preset dictionary)
+ If FDICT is set, a DICT dictionary identifier is present
+ immediately after the FLG byte. The dictionary is a sequence of
+ bytes which are initially fed to the compressor without
+ producing any compressed output. DICT is the Adler-32 checksum
+ of this sequence of bytes (see the definition of ADLER32
+ below). The decompressor can use this identifier to determine
+ which dictionary has been used by the compressor.
+
+ FLEVEL (Compression level)
+ These flags are available for use by specific compression
+ methods. The "deflate" method (CM = 8) sets these flags as
+ follows:
+
+ 0 - compressor used fastest algorithm
+ 1 - compressor used fast algorithm
+ 2 - compressor used default algorithm
+ 3 - compressor used maximum compression, slowest algorithm
+
+ The information in FLEVEL is not needed for decompression; it
+ is there to indicate if recompression might be worthwhile.
+
+ compressed data
+ For compression method 8, the compressed data is stored in the
+ deflate compressed data format as described in the document
+ "DEFLATE Compressed Data Format Specification" by L. Peter
+ Deutsch. (See reference [3] in Chapter 3, below)
+
+ Other compressed data formats are not specified in this version
+ of the zlib specification.
+
+ ADLER32 (Adler-32 checksum)
+ This contains a checksum value of the uncompressed data
+ (excluding any dictionary data) computed according to Adler-32
+ algorithm. This algorithm is a 32-bit extension and improvement
+ of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073
+ standard. See references [4] and [5] in Chapter 3, below)
+
+ Adler-32 is composed of two sums accumulated per byte: s1 is
+ the sum of all bytes, s2 is the sum of all s1 values. Both sums
+ are done modulo 65521. s1 is initialized to 1, s2 to zero. The
+ Adler-32 checksum is stored as s2*65536 + s1 in most-
+ significant-byte first (network) order.
+
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 6]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ 2.3. Compliance
+
+ A compliant compressor must produce streams with correct CMF, FLG
+ and ADLER32, but need not support preset dictionaries. When the
+ zlib data format is used as part of another standard data format,
+ the compressor may use only preset dictionaries that are specified
+ by this other data format. If this other format does not use the
+ preset dictionary feature, the compressor must not set the FDICT
+ flag.
+
+ A compliant decompressor must check CMF, FLG, and ADLER32, and
+ provide an error indication if any of these have incorrect values.
+ A compliant decompressor must give an error indication if CM is
+ not one of the values defined in this specification (only the
+ value 8 is permitted in this version), since another value could
+ indicate the presence of new features that would cause subsequent
+ data to be interpreted incorrectly. A compliant decompressor must
+ give an error indication if FDICT is set and DICTID is not the
+ identifier of a known preset dictionary. A decompressor may
+ ignore FLEVEL and still be compliant. When the zlib data format
+ is being used as a part of another standard format, a compliant
+ decompressor must support all the preset dictionaries specified by
+ the other format. When the other format does not use the preset
+ dictionary feature, a compliant decompressor must reject any
+ stream in which the FDICT flag is set.
+
+3. References
+
+ [1] Deutsch, L.P.,"GZIP Compressed Data Format Specification",
+ available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+ [2] Thomas Boutell, "PNG (Portable Network Graphics) specification",
+ available in ftp://ftp.uu.net/graphics/png/documents/
+
+ [3] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification",
+ available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+ [4] Fletcher, J. G., "An Arithmetic Checksum for Serial
+ Transmissions," IEEE Transactions on Communications, Vol. COM-30,
+ No. 1, January 1982, pp. 247-252.
+
+ [5] ITU-T Recommendation X.224, Annex D, "Checksum Algorithms,"
+ November, 1993, pp. 144, 145. (Available from
+ gopher://info.itu.ch). ITU-T X.244 is also the same as ISO 8073.
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 7]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+4. Source code
+
+ Source code for a C language implementation of a "zlib" compliant
+ library is available at ftp://ftp.uu.net/pub/archiving/zip/zlib/.
+
+5. Security Considerations
+
+ A decoder that fails to check the ADLER32 checksum value may be
+ subject to undetected data corruption.
+
+6. Acknowledgements
+
+ Trademarks cited in this document are the property of their
+ respective owners.
+
+ Jean-Loup Gailly and Mark Adler designed the zlib format and wrote
+ the related software described in this specification. Glenn
+ Randers-Pehrson converted this document to RFC and HTML format.
+
+7. Authors' Addresses
+
+ L. Peter Deutsch
+ Aladdin Enterprises
+ 203 Santa Margarita Ave.
+ Menlo Park, CA 94025
+
+ Phone: (415) 322-0103 (AM only)
+ FAX: (415) 322-1734
+ EMail: <ghost@aladdin.com>
+
+
+ Jean-Loup Gailly
+
+ EMail: <gzip@prep.ai.mit.edu>
+
+ Questions about the technical content of this specification can be
+ sent by email to
+
+ Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
+ Mark Adler <madler@alumni.caltech.edu>
+
+ Editorial comments on this specification can be sent by email to
+
+ L. Peter Deutsch <ghost@aladdin.com> and
+ Glenn Randers-Pehrson <randeg@alumni.rpi.edu>
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 8]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+8. Appendix: Rationale
+
+ 8.1. Preset dictionaries
+
+ A preset dictionary is specially useful to compress short input
+ sequences. The compressor can take advantage of the dictionary
+ context to encode the input in a more compact manner. The
+ decompressor can be initialized with the appropriate context by
+ virtually decompressing a compressed version of the dictionary
+ without producing any output. However for certain compression
+ algorithms such as the deflate algorithm this operation can be
+ achieved without actually performing any decompression.
+
+ The compressor and the decompressor must use exactly the same
+ dictionary. The dictionary may be fixed or may be chosen among a
+ certain number of predefined dictionaries, according to the kind
+ of input data. The decompressor can determine which dictionary has
+ been chosen by the compressor by checking the dictionary
+ identifier. This document does not specify the contents of
+ predefined dictionaries, since the optimal dictionaries are
+ application specific. Standard data formats using this feature of
+ the zlib specification must precisely define the allowed
+ dictionaries.
+
+ 8.2. The Adler-32 algorithm
+
+ The Adler-32 algorithm is much faster than the CRC32 algorithm yet
+ still provides an extremely low probability of undetected errors.
+
+ The modulo on unsigned long accumulators can be delayed for 5552
+ bytes, so the modulo operation time is negligible. If the bytes
+ are a, b, c, the second sum is 3a + 2b + c + 3, and so is position
+ and order sensitive, unlike the first sum, which is just a
+ checksum. That 65521 is prime is important to avoid a possible
+ large class of two-byte errors that leave the check unchanged.
+ (The Fletcher checksum uses 255, which is not prime and which also
+ makes the Fletcher check insensitive to single byte changes 0 <->
+ 255.)
+
+ The sum s1 is initialized to 1 instead of zero to make the length
+ of the sequence part of s2, so that the length does not have to be
+ checked separately. (Any sequence of zeroes has a Fletcher
+ checksum of zero.)
+
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 9]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+9. Appendix: Sample code
+
+ The following C code computes the Adler-32 checksum of a data buffer.
+ It is written for clarity, not for speed. The sample code is in the
+ ANSI C programming language. Non C users may find it easier to read
+ with these hints:
+
+ & Bitwise AND operator.
+ >> Bitwise right shift operator. When applied to an
+ unsigned quantity, as here, right shift inserts zero bit(s)
+ at the left.
+ << Bitwise left shift operator. Left shift inserts zero
+ bit(s) at the right.
+ ++ "n++" increments the variable n.
+ % modulo operator: a % b is the remainder of a divided by b.
+
+ #define BASE 65521 /* largest prime smaller than 65536 */
+
+ /*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1]
+ and return the updated checksum. The Adler-32 checksum should be
+ initialized to 1.
+
+ Usage example:
+
+ unsigned long adler = 1L;
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = update_adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+ */
+ unsigned long update_adler32(unsigned long adler,
+ unsigned char *buf, int len)
+ {
+ unsigned long s1 = adler & 0xffff;
+ unsigned long s2 = (adler >> 16) & 0xffff;
+ int n;
+
+ for (n = 0; n < len; n++) {
+ s1 = (s1 + buf[n]) % BASE;
+ s2 = (s2 + s1) % BASE;
+ }
+ return (s2 << 16) + s1;
+ }
+
+ /* Return the adler32 of the bytes buf[0..len-1] */
+
+
+
+
+Deutsch & Gailly Informational [Page 10]
+
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ unsigned long adler32(unsigned char *buf, int len)
+ {
+ return update_adler32(1L, buf, len);
+ }
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 11]
+
diff --git a/zlib/doc/rfc1951.txt b/zlib/doc/rfc1951.txt
new file mode 100644
index 000000000..403c8c722
--- /dev/null
+++ b/zlib/doc/rfc1951.txt
@@ -0,0 +1,955 @@
+
+
+
+
+
+
+Network Working Group P. Deutsch
+Request for Comments: 1951 Aladdin Enterprises
+Category: Informational May 1996
+
+
+ DEFLATE Compressed Data Format Specification version 1.3
+
+Status of This Memo
+
+ This memo provides information for the Internet community. This memo
+ does not specify an Internet standard of any kind. Distribution of
+ this memo is unlimited.
+
+IESG Note:
+
+ The IESG takes no position on the validity of any Intellectual
+ Property Rights statements contained in this document.
+
+Notices
+
+ Copyright (c) 1996 L. Peter Deutsch
+
+ Permission is granted to copy and distribute this document for any
+ purpose and without charge, including translations into other
+ languages and incorporation into compilations, provided that the
+ copyright notice and this notice are preserved, and that any
+ substantive changes or deletions from the original are clearly
+ marked.
+
+ A pointer to the latest version of this and related documentation in
+ HTML format can be found at the URL
+ <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.
+
+Abstract
+
+ This specification defines a lossless compressed data format that
+ compresses data using a combination of the LZ77 algorithm and Huffman
+ coding, with efficiency comparable to the best currently available
+ general-purpose compression methods. The data can be produced or
+ consumed, even for an arbitrarily long sequentially presented input
+ data stream, using only an a priori bounded amount of intermediate
+ storage. The format can be implemented readily in a manner not
+ covered by patents.
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 1]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+Table of Contents
+
+ 1. Introduction ................................................... 2
+ 1.1. Purpose ................................................... 2
+ 1.2. Intended audience ......................................... 3
+ 1.3. Scope ..................................................... 3
+ 1.4. Compliance ................................................ 3
+ 1.5. Definitions of terms and conventions used ................ 3
+ 1.6. Changes from previous versions ............................ 4
+ 2. Compressed representation overview ............................. 4
+ 3. Detailed specification ......................................... 5
+ 3.1. Overall conventions ....................................... 5
+ 3.1.1. Packing into bytes .................................. 5
+ 3.2. Compressed block format ................................... 6
+ 3.2.1. Synopsis of prefix and Huffman coding ............... 6
+ 3.2.2. Use of Huffman coding in the "deflate" format ....... 7
+ 3.2.3. Details of block format ............................. 9
+ 3.2.4. Non-compressed blocks (BTYPE=00) ................... 11
+ 3.2.5. Compressed blocks (length and distance codes) ...... 11
+ 3.2.6. Compression with fixed Huffman codes (BTYPE=01) .... 12
+ 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) .. 13
+ 3.3. Compliance ............................................... 14
+ 4. Compression algorithm details ................................. 14
+ 5. References .................................................... 16
+ 6. Security Considerations ....................................... 16
+ 7. Source code ................................................... 16
+ 8. Acknowledgements .............................................. 16
+ 9. Author's Address .............................................. 17
+
+1. Introduction
+
+ 1.1. Purpose
+
+ The purpose of this specification is to define a lossless
+ compressed data format that:
+ * Is independent of CPU type, operating system, file system,
+ and character set, and hence can be used for interchange;
+ * Can be produced or consumed, even for an arbitrarily long
+ sequentially presented input data stream, using only an a
+ priori bounded amount of intermediate storage, and hence
+ can be used in data communications or similar structures
+ such as Unix filters;
+ * Compresses data with efficiency comparable to the best
+ currently available general-purpose compression methods,
+ and in particular considerably better than the "compress"
+ program;
+ * Can be implemented readily in a manner not covered by
+ patents, and hence can be practiced freely;
+
+
+
+Deutsch Informational [Page 2]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ * Is compatible with the file format produced by the current
+ widely used gzip utility, in that conforming decompressors
+ will be able to read data produced by the existing gzip
+ compressor.
+
+ The data format defined by this specification does not attempt to:
+
+ * Allow random access to compressed data;
+ * Compress specialized data (e.g., raster graphics) as well
+ as the best currently available specialized algorithms.
+
+ A simple counting argument shows that no lossless compression
+ algorithm can compress every possible input data set. For the
+ format defined here, the worst case expansion is 5 bytes per 32K-
+ byte block, i.e., a size increase of 0.015% for large data sets.
+ English text usually compresses by a factor of 2.5 to 3;
+ executable files usually compress somewhat less; graphical data
+ such as raster images may compress much more.
+
+ 1.2. Intended audience
+
+ This specification is intended for use by implementors of software
+ to compress data into "deflate" format and/or decompress data from
+ "deflate" format.
+
+ The text of the specification assumes a basic background in
+ programming at the level of bits and other primitive data
+ representations. Familiarity with the technique of Huffman coding
+ is helpful but not required.
+
+ 1.3. Scope
+
+ The specification specifies a method for representing a sequence
+ of bytes as a (usually shorter) sequence of bits, and a method for
+ packing the latter bit sequence into bytes.
+
+ 1.4. Compliance
+
+ Unless otherwise indicated below, a compliant decompressor must be
+ able to accept and decompress any data set that conforms to all
+ the specifications presented here; a compliant compressor must
+ produce data sets that conform to all the specifications presented
+ here.
+
+ 1.5. Definitions of terms and conventions used
+
+ Byte: 8 bits stored or transmitted as a unit (same as an octet).
+ For this specification, a byte is exactly 8 bits, even on machines
+
+
+
+Deutsch Informational [Page 3]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ which store a character on a number of bits different from eight.
+ See below, for the numbering of bits within a byte.
+
+ String: a sequence of arbitrary bytes.
+
+ 1.6. Changes from previous versions
+
+ There have been no technical changes to the deflate format since
+ version 1.1 of this specification. In version 1.2, some
+ terminology was changed. Version 1.3 is a conversion of the
+ specification to RFC style.
+
+2. Compressed representation overview
+
+ A compressed data set consists of a series of blocks, corresponding
+ to successive blocks of input data. The block sizes are arbitrary,
+ except that non-compressible blocks are limited to 65,535 bytes.
+
+ Each block is compressed using a combination of the LZ77 algorithm
+ and Huffman coding. The Huffman trees for each block are independent
+ of those for previous or subsequent blocks; the LZ77 algorithm may
+ use a reference to a duplicated string occurring in a previous block,
+ up to 32K input bytes before.
+
+ Each block consists of two parts: a pair of Huffman code trees that
+ describe the representation of the compressed data part, and a
+ compressed data part. (The Huffman trees themselves are compressed
+ using Huffman encoding.) The compressed data consists of a series of
+ elements of two types: literal bytes (of strings that have not been
+ detected as duplicated within the previous 32K input bytes), and
+ pointers to duplicated strings, where a pointer is represented as a
+ pair <length, backward distance>. The representation used in the
+ "deflate" format limits distances to 32K bytes and lengths to 258
+ bytes, but does not limit the size of a block, except for
+ uncompressible blocks, which are limited as noted above.
+
+ Each type of value (literals, distances, and lengths) in the
+ compressed data is represented using a Huffman code, using one code
+ tree for literals and lengths and a separate code tree for distances.
+ The code trees for each block appear in a compact form just before
+ the compressed data for that block.
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 4]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+3. Detailed specification
+
+ 3.1. Overall conventions In the diagrams below, a box like this:
+
+ +---+
+ | | <-- the vertical bars might be missing
+ +---+
+
+ represents one byte; a box like this:
+
+ +==============+
+ | |
+ +==============+
+
+ represents a variable number of bytes.
+
+ Bytes stored within a computer do not have a "bit order", since
+ they are always treated as a unit. However, a byte considered as
+ an integer between 0 and 255 does have a most- and least-
+ significant bit, and since we write numbers with the most-
+ significant digit on the left, we also write bytes with the most-
+ significant bit on the left. In the diagrams below, we number the
+ bits of a byte so that bit 0 is the least-significant bit, i.e.,
+ the bits are numbered:
+
+ +--------+
+ |76543210|
+ +--------+
+
+ Within a computer, a number may occupy multiple bytes. All
+ multi-byte numbers in the format described here are stored with
+ the least-significant byte first (at the lower memory address).
+ For example, the decimal number 520 is stored as:
+
+ 0 1
+ +--------+--------+
+ |00001000|00000010|
+ +--------+--------+
+ ^ ^
+ | |
+ | + more significant byte = 2 x 256
+ + less significant byte = 8
+
+ 3.1.1. Packing into bytes
+
+ This document does not address the issue of the order in which
+ bits of a byte are transmitted on a bit-sequential medium,
+ since the final data format described here is byte- rather than
+
+
+
+Deutsch Informational [Page 5]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ bit-oriented. However, we describe the compressed block format
+ in below, as a sequence of data elements of various bit
+ lengths, not a sequence of bytes. We must therefore specify
+ how to pack these data elements into bytes to form the final
+ compressed byte sequence:
+
+ * Data elements are packed into bytes in order of
+ increasing bit number within the byte, i.e., starting
+ with the least-significant bit of the byte.
+ * Data elements other than Huffman codes are packed
+ starting with the least-significant bit of the data
+ element.
+ * Huffman codes are packed starting with the most-
+ significant bit of the code.
+
+ In other words, if one were to print out the compressed data as
+ a sequence of bytes, starting with the first byte at the
+ *right* margin and proceeding to the *left*, with the most-
+ significant bit of each byte on the left as usual, one would be
+ able to parse the result from right to left, with fixed-width
+ elements in the correct MSB-to-LSB order and Huffman codes in
+ bit-reversed order (i.e., with the first bit of the code in the
+ relative LSB position).
+
+ 3.2. Compressed block format
+
+ 3.2.1. Synopsis of prefix and Huffman coding
+
+ Prefix coding represents symbols from an a priori known
+ alphabet by bit sequences (codes), one code for each symbol, in
+ a manner such that different symbols may be represented by bit
+ sequences of different lengths, but a parser can always parse
+ an encoded string unambiguously symbol-by-symbol.
+
+ We define a prefix code in terms of a binary tree in which the
+ two edges descending from each non-leaf node are labeled 0 and
+ 1 and in which the leaf nodes correspond one-for-one with (are
+ labeled with) the symbols of the alphabet; then the code for a
+ symbol is the sequence of 0's and 1's on the edges leading from
+ the root to the leaf labeled with that symbol. For example:
+
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 6]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ /\ Symbol Code
+ 0 1 ------ ----
+ / \ A 00
+ /\ B B 1
+ 0 1 C 011
+ / \ D 010
+ A /\
+ 0 1
+ / \
+ D C
+
+ A parser can decode the next symbol from an encoded input
+ stream by walking down the tree from the root, at each step
+ choosing the edge corresponding to the next input bit.
+
+ Given an alphabet with known symbol frequencies, the Huffman
+ algorithm allows the construction of an optimal prefix code
+ (one which represents strings with those symbol frequencies
+ using the fewest bits of any possible prefix codes for that
+ alphabet). Such a code is called a Huffman code. (See
+ reference [1] in Chapter 5, references for additional
+ information on Huffman codes.)
+
+ Note that in the "deflate" format, the Huffman codes for the
+ various alphabets must not exceed certain maximum code lengths.
+ This constraint complicates the algorithm for computing code
+ lengths from symbol frequencies. Again, see Chapter 5,
+ references for details.
+
+ 3.2.2. Use of Huffman coding in the "deflate" format
+
+ The Huffman codes used for each alphabet in the "deflate"
+ format have two additional rules:
+
+ * All codes of a given bit length have lexicographically
+ consecutive values, in the same order as the symbols
+ they represent;
+
+ * Shorter codes lexicographically precede longer codes.
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 7]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ We could recode the example above to follow this rule as
+ follows, assuming that the order of the alphabet is ABCD:
+
+ Symbol Code
+ ------ ----
+ A 10
+ B 0
+ C 110
+ D 111
+
+ I.e., 0 precedes 10 which precedes 11x, and 110 and 111 are
+ lexicographically consecutive.
+
+ Given this rule, we can define the Huffman code for an alphabet
+ just by giving the bit lengths of the codes for each symbol of
+ the alphabet in order; this is sufficient to determine the
+ actual codes. In our example, the code is completely defined
+ by the sequence of bit lengths (2, 1, 3, 3). The following
+ algorithm generates the codes as integers, intended to be read
+ from most- to least-significant bit. The code lengths are
+ initially in tree[I].Len; the codes are produced in
+ tree[I].Code.
+
+ 1) Count the number of codes for each code length. Let
+ bl_count[N] be the number of codes of length N, N >= 1.
+
+ 2) Find the numerical value of the smallest code for each
+ code length:
+
+ code = 0;
+ bl_count[0] = 0;
+ for (bits = 1; bits <= MAX_BITS; bits++) {
+ code = (code + bl_count[bits-1]) << 1;
+ next_code[bits] = code;
+ }
+
+ 3) Assign numerical values to all codes, using consecutive
+ values for all codes of the same length with the base
+ values determined at step 2. Codes that are never used
+ (which have a bit length of zero) must not be assigned a
+ value.
+
+ for (n = 0; n <= max_code; n++) {
+ len = tree[n].Len;
+ if (len != 0) {
+ tree[n].Code = next_code[len];
+ next_code[len]++;
+ }
+
+
+
+Deutsch Informational [Page 8]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ }
+
+ Example:
+
+ Consider the alphabet ABCDEFGH, with bit lengths (3, 3, 3, 3,
+ 3, 2, 4, 4). After step 1, we have:
+
+ N bl_count[N]
+ - -----------
+ 2 1
+ 3 5
+ 4 2
+
+ Step 2 computes the following next_code values:
+
+ N next_code[N]
+ - ------------
+ 1 0
+ 2 0
+ 3 2
+ 4 14
+
+ Step 3 produces the following code values:
+
+ Symbol Length Code
+ ------ ------ ----
+ A 3 010
+ B 3 011
+ C 3 100
+ D 3 101
+ E 3 110
+ F 2 00
+ G 4 1110
+ H 4 1111
+
+ 3.2.3. Details of block format
+
+ Each block of compressed data begins with 3 header bits
+ containing the following data:
+
+ first bit BFINAL
+ next 2 bits BTYPE
+
+ Note that the header bits do not necessarily begin on a byte
+ boundary, since a block does not necessarily occupy an integral
+ number of bytes.
+
+
+
+
+
+Deutsch Informational [Page 9]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ BFINAL is set if and only if this is the last block of the data
+ set.
+
+ BTYPE specifies how the data are compressed, as follows:
+
+ 00 - no compression
+ 01 - compressed with fixed Huffman codes
+ 10 - compressed with dynamic Huffman codes
+ 11 - reserved (error)
+
+ The only difference between the two compressed cases is how the
+ Huffman codes for the literal/length and distance alphabets are
+ defined.
+
+ In all cases, the decoding algorithm for the actual data is as
+ follows:
+
+ do
+ read block header from input stream.
+ if stored with no compression
+ skip any remaining bits in current partially
+ processed byte
+ read LEN and NLEN (see next section)
+ copy LEN bytes of data to output
+ otherwise
+ if compressed with dynamic Huffman codes
+ read representation of code trees (see
+ subsection below)
+ loop (until end of block code recognized)
+ decode literal/length value from input stream
+ if value < 256
+ copy value (literal byte) to output stream
+ otherwise
+ if value = end of block (256)
+ break from loop
+ otherwise (value = 257..285)
+ decode distance from input stream
+
+ move backwards distance bytes in the output
+ stream, and copy length bytes from this
+ position to the output stream.
+ end loop
+ while not last block
+
+ Note that a duplicated string reference may refer to a string
+ in a previous block; i.e., the backward distance may cross one
+ or more block boundaries. However a distance cannot refer past
+ the beginning of the output stream. (An application using a
+
+
+
+Deutsch Informational [Page 10]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ preset dictionary might discard part of the output stream; a
+ distance can refer to that part of the output stream anyway)
+ Note also that the referenced string may overlap the current
+ position; for example, if the last 2 bytes decoded have values
+ X and Y, a string reference with <length = 5, distance = 2>
+ adds X,Y,X,Y,X to the output stream.
+
+ We now specify each compression method in turn.
+
+ 3.2.4. Non-compressed blocks (BTYPE=00)
+
+ Any bits of input up to the next byte boundary are ignored.
+ The rest of the block consists of the following information:
+
+ 0 1 2 3 4...
+ +---+---+---+---+================================+
+ | LEN | NLEN |... LEN bytes of literal data...|
+ +---+---+---+---+================================+
+
+ LEN is the number of data bytes in the block. NLEN is the
+ one's complement of LEN.
+
+ 3.2.5. Compressed blocks (length and distance codes)
+
+ As noted above, encoded data blocks in the "deflate" format
+ consist of sequences of symbols drawn from three conceptually
+ distinct alphabets: either literal bytes, from the alphabet of
+ byte values (0..255), or <length, backward distance> pairs,
+ where the length is drawn from (3..258) and the distance is
+ drawn from (1..32,768). In fact, the literal and length
+ alphabets are merged into a single alphabet (0..285), where
+ values 0..255 represent literal bytes, the value 256 indicates
+ end-of-block, and values 257..285 represent length codes
+ (possibly in conjunction with extra bits following the symbol
+ code) as follows:
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 11]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ Extra Extra Extra
+ Code Bits Length(s) Code Bits Lengths Code Bits Length(s)
+ ---- ---- ------ ---- ---- ------- ---- ---- -------
+ 257 0 3 267 1 15,16 277 4 67-82
+ 258 0 4 268 1 17,18 278 4 83-98
+ 259 0 5 269 2 19-22 279 4 99-114
+ 260 0 6 270 2 23-26 280 4 115-130
+ 261 0 7 271 2 27-30 281 5 131-162
+ 262 0 8 272 2 31-34 282 5 163-194
+ 263 0 9 273 3 35-42 283 5 195-226
+ 264 0 10 274 3 43-50 284 5 227-257
+ 265 1 11,12 275 3 51-58 285 0 258
+ 266 1 13,14 276 3 59-66
+
+ The extra bits should be interpreted as a machine integer
+ stored with the most-significant bit first, e.g., bits 1110
+ represent the value 14.
+
+ Extra Extra Extra
+ Code Bits Dist Code Bits Dist Code Bits Distance
+ ---- ---- ---- ---- ---- ------ ---- ---- --------
+ 0 0 1 10 4 33-48 20 9 1025-1536
+ 1 0 2 11 4 49-64 21 9 1537-2048
+ 2 0 3 12 5 65-96 22 10 2049-3072
+ 3 0 4 13 5 97-128 23 10 3073-4096
+ 4 1 5,6 14 6 129-192 24 11 4097-6144
+ 5 1 7,8 15 6 193-256 25 11 6145-8192
+ 6 2 9-12 16 7 257-384 26 12 8193-12288
+ 7 2 13-16 17 7 385-512 27 12 12289-16384
+ 8 3 17-24 18 8 513-768 28 13 16385-24576
+ 9 3 25-32 19 8 769-1024 29 13 24577-32768
+
+ 3.2.6. Compression with fixed Huffman codes (BTYPE=01)
+
+ The Huffman codes for the two alphabets are fixed, and are not
+ represented explicitly in the data. The Huffman code lengths
+ for the literal/length alphabet are:
+
+ Lit Value Bits Codes
+ --------- ---- -----
+ 0 - 143 8 00110000 through
+ 10111111
+ 144 - 255 9 110010000 through
+ 111111111
+ 256 - 279 7 0000000 through
+ 0010111
+ 280 - 287 8 11000000 through
+ 11000111
+
+
+
+Deutsch Informational [Page 12]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ The code lengths are sufficient to generate the actual codes,
+ as described above; we show the codes in the table for added
+ clarity. Literal/length values 286-287 will never actually
+ occur in the compressed data, but participate in the code
+ construction.
+
+ Distance codes 0-31 are represented by (fixed-length) 5-bit
+ codes, with possible additional bits as shown in the table
+ shown in Paragraph 3.2.5, above. Note that distance codes 30-
+ 31 will never actually occur in the compressed data.
+
+ 3.2.7. Compression with dynamic Huffman codes (BTYPE=10)
+
+ The Huffman codes for the two alphabets appear in the block
+ immediately after the header bits and before the actual
+ compressed data, first the literal/length code and then the
+ distance code. Each code is defined by a sequence of code
+ lengths, as discussed in Paragraph 3.2.2, above. For even
+ greater compactness, the code length sequences themselves are
+ compressed using a Huffman code. The alphabet for code lengths
+ is as follows:
+
+ 0 - 15: Represent code lengths of 0 - 15
+ 16: Copy the previous code length 3 - 6 times.
+ The next 2 bits indicate repeat length
+ (0 = 3, ... , 3 = 6)
+ Example: Codes 8, 16 (+2 bits 11),
+ 16 (+2 bits 10) will expand to
+ 12 code lengths of 8 (1 + 6 + 5)
+ 17: Repeat a code length of 0 for 3 - 10 times.
+ (3 bits of length)
+ 18: Repeat a code length of 0 for 11 - 138 times
+ (7 bits of length)
+
+ A code length of 0 indicates that the corresponding symbol in
+ the literal/length or distance alphabet will not occur in the
+ block, and should not participate in the Huffman code
+ construction algorithm given earlier. If only one distance
+ code is used, it is encoded using one bit, not zero bits; in
+ this case there is a single code length of one, with one unused
+ code. One distance code of zero bits means that there are no
+ distance codes used at all (the data is all literals).
+
+ We can now define the format of the block:
+
+ 5 Bits: HLIT, # of Literal/Length codes - 257 (257 - 286)
+ 5 Bits: HDIST, # of Distance codes - 1 (1 - 32)
+ 4 Bits: HCLEN, # of Code Length codes - 4 (4 - 19)
+
+
+
+Deutsch Informational [Page 13]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ (HCLEN + 4) x 3 bits: code lengths for the code length
+ alphabet given just above, in the order: 16, 17, 18,
+ 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
+
+ These code lengths are interpreted as 3-bit integers
+ (0-7); as above, a code length of 0 means the
+ corresponding symbol (literal/length or distance code
+ length) is not used.
+
+ HLIT + 257 code lengths for the literal/length alphabet,
+ encoded using the code length Huffman code
+
+ HDIST + 1 code lengths for the distance alphabet,
+ encoded using the code length Huffman code
+
+ The actual compressed data of the block,
+ encoded using the literal/length and distance Huffman
+ codes
+
+ The literal/length symbol 256 (end of data),
+ encoded using the literal/length Huffman code
+
+ The code length repeat codes can cross from HLIT + 257 to the
+ HDIST + 1 code lengths. In other words, all code lengths form
+ a single sequence of HLIT + HDIST + 258 values.
+
+ 3.3. Compliance
+
+ A compressor may limit further the ranges of values specified in
+ the previous section and still be compliant; for example, it may
+ limit the range of backward pointers to some value smaller than
+ 32K. Similarly, a compressor may limit the size of blocks so that
+ a compressible block fits in memory.
+
+ A compliant decompressor must accept the full range of possible
+ values defined in the previous section, and must accept blocks of
+ arbitrary size.
+
+4. Compression algorithm details
+
+ While it is the intent of this document to define the "deflate"
+ compressed data format without reference to any particular
+ compression algorithm, the format is related to the compressed
+ formats produced by LZ77 (Lempel-Ziv 1977, see reference [2] below);
+ since many variations of LZ77 are patented, it is strongly
+ recommended that the implementor of a compressor follow the general
+ algorithm presented here, which is known not to be patented per se.
+ The material in this section is not part of the definition of the
+
+
+
+Deutsch Informational [Page 14]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ specification per se, and a compressor need not follow it in order to
+ be compliant.
+
+ The compressor terminates a block when it determines that starting a
+ new block with fresh trees would be useful, or when the block size
+ fills up the compressor's block buffer.
+
+ The compressor uses a chained hash table to find duplicated strings,
+ using a hash function that operates on 3-byte sequences. At any
+ given point during compression, let XYZ be the next 3 input bytes to
+ be examined (not necessarily all different, of course). First, the
+ compressor examines the hash chain for XYZ. If the chain is empty,
+ the compressor simply writes out X as a literal byte and advances one
+ byte in the input. If the hash chain is not empty, indicating that
+ the sequence XYZ (or, if we are unlucky, some other 3 bytes with the
+ same hash function value) has occurred recently, the compressor
+ compares all strings on the XYZ hash chain with the actual input data
+ sequence starting at the current point, and selects the longest
+ match.
+
+ The compressor searches the hash chains starting with the most recent
+ strings, to favor small distances and thus take advantage of the
+ Huffman encoding. The hash chains are singly linked. There are no
+ deletions from the hash chains; the algorithm simply discards matches
+ that are too old. To avoid a worst-case situation, very long hash
+ chains are arbitrarily truncated at a certain length, determined by a
+ run-time parameter.
+
+ To improve overall compression, the compressor optionally defers the
+ selection of matches ("lazy matching"): after a match of length N has
+ been found, the compressor searches for a longer match starting at
+ the next input byte. If it finds a longer match, it truncates the
+ previous match to a length of one (thus producing a single literal
+ byte) and then emits the longer match. Otherwise, it emits the
+ original match, and, as described above, advances N bytes before
+ continuing.
+
+ Run-time parameters also control this "lazy match" procedure. If
+ compression ratio is most important, the compressor attempts a
+ complete second search regardless of the length of the first match.
+ In the normal case, if the current match is "long enough", the
+ compressor reduces the search for a longer match, thus speeding up
+ the process. If speed is most important, the compressor inserts new
+ strings in the hash table only when no match was found, or when the
+ match is not "too long". This degrades the compression ratio but
+ saves time since there are both fewer insertions and fewer searches.
+
+
+
+
+
+Deutsch Informational [Page 15]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+5. References
+
+ [1] Huffman, D. A., "A Method for the Construction of Minimum
+ Redundancy Codes", Proceedings of the Institute of Radio
+ Engineers, September 1952, Volume 40, Number 9, pp. 1098-1101.
+
+ [2] Ziv J., Lempel A., "A Universal Algorithm for Sequential Data
+ Compression", IEEE Transactions on Information Theory, Vol. 23,
+ No. 3, pp. 337-343.
+
+ [3] Gailly, J.-L., and Adler, M., ZLIB documentation and sources,
+ available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+ [4] Gailly, J.-L., and Adler, M., GZIP documentation and sources,
+ available as gzip-*.tar in ftp://prep.ai.mit.edu/pub/gnu/
+
+ [5] Schwartz, E. S., and Kallick, B. "Generating a canonical prefix
+ encoding." Comm. ACM, 7,3 (Mar. 1964), pp. 166-169.
+
+ [6] Hirschberg and Lelewer, "Efficient decoding of prefix codes,"
+ Comm. ACM, 33,4, April 1990, pp. 449-459.
+
+6. Security Considerations
+
+ Any data compression method involves the reduction of redundancy in
+ the data. Consequently, any corruption of the data is likely to have
+ severe effects and be difficult to correct. Uncompressed text, on
+ the other hand, will probably still be readable despite the presence
+ of some corrupted bytes.
+
+ It is recommended that systems using this data format provide some
+ means of validating the integrity of the compressed data. See
+ reference [3], for example.
+
+7. Source code
+
+ Source code for a C language implementation of a "deflate" compliant
+ compressor and decompressor is available within the zlib package at
+ ftp://ftp.uu.net/pub/archiving/zip/zlib/.
+
+8. Acknowledgements
+
+ Trademarks cited in this document are the property of their
+ respective owners.
+
+ Phil Katz designed the deflate format. Jean-Loup Gailly and Mark
+ Adler wrote the related software described in this specification.
+ Glenn Randers-Pehrson converted this document to RFC and HTML format.
+
+
+
+Deutsch Informational [Page 16]
+
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+9. Author's Address
+
+ L. Peter Deutsch
+ Aladdin Enterprises
+ 203 Santa Margarita Ave.
+ Menlo Park, CA 94025
+
+ Phone: (415) 322-0103 (AM only)
+ FAX: (415) 322-1734
+ EMail: <ghost@aladdin.com>
+
+ Questions about the technical content of this specification can be
+ sent by email to:
+
+ Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
+ Mark Adler <madler@alumni.caltech.edu>
+
+ Editorial comments on this specification can be sent by email to:
+
+ L. Peter Deutsch <ghost@aladdin.com> and
+ Glenn Randers-Pehrson <randeg@alumni.rpi.edu>
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 17]
+
diff --git a/zlib/doc/rfc1952.txt b/zlib/doc/rfc1952.txt
new file mode 100644
index 000000000..a8e51b456
--- /dev/null
+++ b/zlib/doc/rfc1952.txt
@@ -0,0 +1,675 @@
+
+
+
+
+
+
+Network Working Group P. Deutsch
+Request for Comments: 1952 Aladdin Enterprises
+Category: Informational May 1996
+
+
+ GZIP file format specification version 4.3
+
+Status of This Memo
+
+ This memo provides information for the Internet community. This memo
+ does not specify an Internet standard of any kind. Distribution of
+ this memo is unlimited.
+
+IESG Note:
+
+ The IESG takes no position on the validity of any Intellectual
+ Property Rights statements contained in this document.
+
+Notices
+
+ Copyright (c) 1996 L. Peter Deutsch
+
+ Permission is granted to copy and distribute this document for any
+ purpose and without charge, including translations into other
+ languages and incorporation into compilations, provided that the
+ copyright notice and this notice are preserved, and that any
+ substantive changes or deletions from the original are clearly
+ marked.
+
+ A pointer to the latest version of this and related documentation in
+ HTML format can be found at the URL
+ <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.
+
+Abstract
+
+ This specification defines a lossless compressed data format that is
+ compatible with the widely used GZIP utility. The format includes a
+ cyclic redundancy check value for detecting data corruption. The
+ format presently uses the DEFLATE method of compression but can be
+ easily extended to use other compression methods. The format can be
+ implemented readily in a manner not covered by patents.
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 1]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+Table of Contents
+
+ 1. Introduction ................................................... 2
+ 1.1. Purpose ................................................... 2
+ 1.2. Intended audience ......................................... 3
+ 1.3. Scope ..................................................... 3
+ 1.4. Compliance ................................................ 3
+ 1.5. Definitions of terms and conventions used ................. 3
+ 1.6. Changes from previous versions ............................ 3
+ 2. Detailed specification ......................................... 4
+ 2.1. Overall conventions ....................................... 4
+ 2.2. File format ............................................... 5
+ 2.3. Member format ............................................. 5
+ 2.3.1. Member header and trailer ........................... 6
+ 2.3.1.1. Extra field ................................... 8
+ 2.3.1.2. Compliance .................................... 9
+ 3. References .................................................. 9
+ 4. Security Considerations .................................... 10
+ 5. Acknowledgements ........................................... 10
+ 6. Author's Address ........................................... 10
+ 7. Appendix: Jean-Loup Gailly's gzip utility .................. 11
+ 8. Appendix: Sample CRC Code .................................. 11
+
+1. Introduction
+
+ 1.1. Purpose
+
+ The purpose of this specification is to define a lossless
+ compressed data format that:
+
+ * Is independent of CPU type, operating system, file system,
+ and character set, and hence can be used for interchange;
+ * Can compress or decompress a data stream (as opposed to a
+ randomly accessible file) to produce another data stream,
+ using only an a priori bounded amount of intermediate
+ storage, and hence can be used in data communications or
+ similar structures such as Unix filters;
+ * Compresses data with efficiency comparable to the best
+ currently available general-purpose compression methods,
+ and in particular considerably better than the "compress"
+ program;
+ * Can be implemented readily in a manner not covered by
+ patents, and hence can be practiced freely;
+ * Is compatible with the file format produced by the current
+ widely used gzip utility, in that conforming decompressors
+ will be able to read data produced by the existing gzip
+ compressor.
+
+
+
+
+Deutsch Informational [Page 2]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ The data format defined by this specification does not attempt to:
+
+ * Provide random access to compressed data;
+ * Compress specialized data (e.g., raster graphics) as well as
+ the best currently available specialized algorithms.
+
+ 1.2. Intended audience
+
+ This specification is intended for use by implementors of software
+ to compress data into gzip format and/or decompress data from gzip
+ format.
+
+ The text of the specification assumes a basic background in
+ programming at the level of bits and other primitive data
+ representations.
+
+ 1.3. Scope
+
+ The specification specifies a compression method and a file format
+ (the latter assuming only that a file can store a sequence of
+ arbitrary bytes). It does not specify any particular interface to
+ a file system or anything about character sets or encodings
+ (except for file names and comments, which are optional).
+
+ 1.4. Compliance
+
+ Unless otherwise indicated below, a compliant decompressor must be
+ able to accept and decompress any file that conforms to all the
+ specifications presented here; a compliant compressor must produce
+ files that conform to all the specifications presented here. The
+ material in the appendices is not part of the specification per se
+ and is not relevant to compliance.
+
+ 1.5. Definitions of terms and conventions used
+
+ byte: 8 bits stored or transmitted as a unit (same as an octet).
+ (For this specification, a byte is exactly 8 bits, even on
+ machines which store a character on a number of bits different
+ from 8.) See below for the numbering of bits within a byte.
+
+ 1.6. Changes from previous versions
+
+ There have been no technical changes to the gzip format since
+ version 4.1 of this specification. In version 4.2, some
+ terminology was changed, and the sample CRC code was rewritten for
+ clarity and to eliminate the requirement for the caller to do pre-
+ and post-conditioning. Version 4.3 is a conversion of the
+ specification to RFC style.
+
+
+
+Deutsch Informational [Page 3]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+2. Detailed specification
+
+ 2.1. Overall conventions
+
+ In the diagrams below, a box like this:
+
+ +---+
+ | | <-- the vertical bars might be missing
+ +---+
+
+ represents one byte; a box like this:
+
+ +==============+
+ | |
+ +==============+
+
+ represents a variable number of bytes.
+
+ Bytes stored within a computer do not have a "bit order", since
+ they are always treated as a unit. However, a byte considered as
+ an integer between 0 and 255 does have a most- and least-
+ significant bit, and since we write numbers with the most-
+ significant digit on the left, we also write bytes with the most-
+ significant bit on the left. In the diagrams below, we number the
+ bits of a byte so that bit 0 is the least-significant bit, i.e.,
+ the bits are numbered:
+
+ +--------+
+ |76543210|
+ +--------+
+
+ This document does not address the issue of the order in which
+ bits of a byte are transmitted on a bit-sequential medium, since
+ the data format described here is byte- rather than bit-oriented.
+
+ Within a computer, a number may occupy multiple bytes. All
+ multi-byte numbers in the format described here are stored with
+ the least-significant byte first (at the lower memory address).
+ For example, the decimal number 520 is stored as:
+
+ 0 1
+ +--------+--------+
+ |00001000|00000010|
+ +--------+--------+
+ ^ ^
+ | |
+ | + more significant byte = 2 x 256
+ + less significant byte = 8
+
+
+
+Deutsch Informational [Page 4]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ 2.2. File format
+
+ A gzip file consists of a series of "members" (compressed data
+ sets). The format of each member is specified in the following
+ section. The members simply appear one after another in the file,
+ with no additional information before, between, or after them.
+
+ 2.3. Member format
+
+ Each member has the following structure:
+
+ +---+---+---+---+---+---+---+---+---+---+
+ |ID1|ID2|CM |FLG| MTIME |XFL|OS | (more-->)
+ +---+---+---+---+---+---+---+---+---+---+
+
+ (if FLG.FEXTRA set)
+
+ +---+---+=================================+
+ | XLEN |...XLEN bytes of "extra field"...| (more-->)
+ +---+---+=================================+
+
+ (if FLG.FNAME set)
+
+ +=========================================+
+ |...original file name, zero-terminated...| (more-->)
+ +=========================================+
+
+ (if FLG.FCOMMENT set)
+
+ +===================================+
+ |...file comment, zero-terminated...| (more-->)
+ +===================================+
+
+ (if FLG.FHCRC set)
+
+ +---+---+
+ | CRC16 |
+ +---+---+
+
+ +=======================+
+ |...compressed blocks...| (more-->)
+ +=======================+
+
+ 0 1 2 3 4 5 6 7
+ +---+---+---+---+---+---+---+---+
+ | CRC32 | ISIZE |
+ +---+---+---+---+---+---+---+---+
+
+
+
+
+Deutsch Informational [Page 5]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ 2.3.1. Member header and trailer
+
+ ID1 (IDentification 1)
+ ID2 (IDentification 2)
+ These have the fixed values ID1 = 31 (0x1f, \037), ID2 = 139
+ (0x8b, \213), to identify the file as being in gzip format.
+
+ CM (Compression Method)
+ This identifies the compression method used in the file. CM
+ = 0-7 are reserved. CM = 8 denotes the "deflate"
+ compression method, which is the one customarily used by
+ gzip and which is documented elsewhere.
+
+ FLG (FLaGs)
+ This flag byte is divided into individual bits as follows:
+
+ bit 0 FTEXT
+ bit 1 FHCRC
+ bit 2 FEXTRA
+ bit 3 FNAME
+ bit 4 FCOMMENT
+ bit 5 reserved
+ bit 6 reserved
+ bit 7 reserved
+
+ If FTEXT is set, the file is probably ASCII text. This is
+ an optional indication, which the compressor may set by
+ checking a small amount of the input data to see whether any
+ non-ASCII characters are present. In case of doubt, FTEXT
+ is cleared, indicating binary data. For systems which have
+ different file formats for ascii text and binary data, the
+ decompressor can use FTEXT to choose the appropriate format.
+ We deliberately do not specify the algorithm used to set
+ this bit, since a compressor always has the option of
+ leaving it cleared and a decompressor always has the option
+ of ignoring it and letting some other program handle issues
+ of data conversion.
+
+ If FHCRC is set, a CRC16 for the gzip header is present,
+ immediately before the compressed data. The CRC16 consists
+ of the two least significant bytes of the CRC32 for all
+ bytes of the gzip header up to and not including the CRC16.
+ [The FHCRC bit was never set by versions of gzip up to
+ 1.2.4, even though it was documented with a different
+ meaning in gzip 1.2.4.]
+
+ If FEXTRA is set, optional extra fields are present, as
+ described in a following section.
+
+
+
+Deutsch Informational [Page 6]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ If FNAME is set, an original file name is present,
+ terminated by a zero byte. The name must consist of ISO
+ 8859-1 (LATIN-1) characters; on operating systems using
+ EBCDIC or any other character set for file names, the name
+ must be translated to the ISO LATIN-1 character set. This
+ is the original name of the file being compressed, with any
+ directory components removed, and, if the file being
+ compressed is on a file system with case insensitive names,
+ forced to lower case. There is no original file name if the
+ data was compressed from a source other than a named file;
+ for example, if the source was stdin on a Unix system, there
+ is no file name.
+
+ If FCOMMENT is set, a zero-terminated file comment is
+ present. This comment is not interpreted; it is only
+ intended for human consumption. The comment must consist of
+ ISO 8859-1 (LATIN-1) characters. Line breaks should be
+ denoted by a single line feed character (10 decimal).
+
+ Reserved FLG bits must be zero.
+
+ MTIME (Modification TIME)
+ This gives the most recent modification time of the original
+ file being compressed. The time is in Unix format, i.e.,
+ seconds since 00:00:00 GMT, Jan. 1, 1970. (Note that this
+ may cause problems for MS-DOS and other systems that use
+ local rather than Universal time.) If the compressed data
+ did not come from a file, MTIME is set to the time at which
+ compression started. MTIME = 0 means no time stamp is
+ available.
+
+ XFL (eXtra FLags)
+ These flags are available for use by specific compression
+ methods. The "deflate" method (CM = 8) sets these flags as
+ follows:
+
+ XFL = 2 - compressor used maximum compression,
+ slowest algorithm
+ XFL = 4 - compressor used fastest algorithm
+
+ OS (Operating System)
+ This identifies the type of file system on which compression
+ took place. This may be useful in determining end-of-line
+ convention for text files. The currently defined values are
+ as follows:
+
+
+
+
+
+
+Deutsch Informational [Page 7]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ 0 - FAT filesystem (MS-DOS, OS/2, NT/Win32)
+ 1 - Amiga
+ 2 - VMS (or OpenVMS)
+ 3 - Unix
+ 4 - VM/CMS
+ 5 - Atari TOS
+ 6 - HPFS filesystem (OS/2, NT)
+ 7 - Macintosh
+ 8 - Z-System
+ 9 - CP/M
+ 10 - TOPS-20
+ 11 - NTFS filesystem (NT)
+ 12 - QDOS
+ 13 - Acorn RISCOS
+ 255 - unknown
+
+ XLEN (eXtra LENgth)
+ If FLG.FEXTRA is set, this gives the length of the optional
+ extra field. See below for details.
+
+ CRC32 (CRC-32)
+ This contains a Cyclic Redundancy Check value of the
+ uncompressed data computed according to CRC-32 algorithm
+ used in the ISO 3309 standard and in section 8.1.1.6.2 of
+ ITU-T recommendation V.42. (See http://www.iso.ch for
+ ordering ISO documents. See gopher://info.itu.ch for an
+ online version of ITU-T V.42.)
+
+ ISIZE (Input SIZE)
+ This contains the size of the original (uncompressed) input
+ data modulo 2^32.
+
+ 2.3.1.1. Extra field
+
+ If the FLG.FEXTRA bit is set, an "extra field" is present in
+ the header, with total length XLEN bytes. It consists of a
+ series of subfields, each of the form:
+
+ +---+---+---+---+==================================+
+ |SI1|SI2| LEN |... LEN bytes of subfield data ...|
+ +---+---+---+---+==================================+
+
+ SI1 and SI2 provide a subfield ID, typically two ASCII letters
+ with some mnemonic value. Jean-Loup Gailly
+ <gzip@prep.ai.mit.edu> is maintaining a registry of subfield
+ IDs; please send him any subfield ID you wish to use. Subfield
+ IDs with SI2 = 0 are reserved for future use. The following
+ IDs are currently defined:
+
+
+
+Deutsch Informational [Page 8]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ SI1 SI2 Data
+ ---------- ---------- ----
+ 0x41 ('A') 0x70 ('P') Apollo file type information
+
+ LEN gives the length of the subfield data, excluding the 4
+ initial bytes.
+
+ 2.3.1.2. Compliance
+
+ A compliant compressor must produce files with correct ID1,
+ ID2, CM, CRC32, and ISIZE, but may set all the other fields in
+ the fixed-length part of the header to default values (255 for
+ OS, 0 for all others). The compressor must set all reserved
+ bits to zero.
+
+ A compliant decompressor must check ID1, ID2, and CM, and
+ provide an error indication if any of these have incorrect
+ values. It must examine FEXTRA/XLEN, FNAME, FCOMMENT and FHCRC
+ at least so it can skip over the optional fields if they are
+ present. It need not examine any other part of the header or
+ trailer; in particular, a decompressor may ignore FTEXT and OS
+ and always produce binary output, and still be compliant. A
+ compliant decompressor must give an error indication if any
+ reserved bit is non-zero, since such a bit could indicate the
+ presence of a new field that would cause subsequent data to be
+ interpreted incorrectly.
+
+3. References
+
+ [1] "Information Processing - 8-bit single-byte coded graphic
+ character sets - Part 1: Latin alphabet No.1" (ISO 8859-1:1987).
+ The ISO 8859-1 (Latin-1) character set is a superset of 7-bit
+ ASCII. Files defining this character set are available as
+ iso_8859-1.* in ftp://ftp.uu.net/graphics/png/documents/
+
+ [2] ISO 3309
+
+ [3] ITU-T recommendation V.42
+
+ [4] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification",
+ available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+ [5] Gailly, J.-L., GZIP documentation, available as gzip-*.tar in
+ ftp://prep.ai.mit.edu/pub/gnu/
+
+ [6] Sarwate, D.V., "Computation of Cyclic Redundancy Checks via Table
+ Look-Up", Communications of the ACM, 31(8), pp.1008-1013.
+
+
+
+
+Deutsch Informational [Page 9]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ [7] Schwaderer, W.D., "CRC Calculation", April 85 PC Tech Journal,
+ pp.118-133.
+
+ [8] ftp://ftp.adelaide.edu.au/pub/rocksoft/papers/crc_v3.txt,
+ describing the CRC concept.
+
+4. Security Considerations
+
+ Any data compression method involves the reduction of redundancy in
+ the data. Consequently, any corruption of the data is likely to have
+ severe effects and be difficult to correct. Uncompressed text, on
+ the other hand, will probably still be readable despite the presence
+ of some corrupted bytes.
+
+ It is recommended that systems using this data format provide some
+ means of validating the integrity of the compressed data, such as by
+ setting and checking the CRC-32 check value.
+
+5. Acknowledgements
+
+ Trademarks cited in this document are the property of their
+ respective owners.
+
+ Jean-Loup Gailly designed the gzip format and wrote, with Mark Adler,
+ the related software described in this specification. Glenn
+ Randers-Pehrson converted this document to RFC and HTML format.
+
+6. Author's Address
+
+ L. Peter Deutsch
+ Aladdin Enterprises
+ 203 Santa Margarita Ave.
+ Menlo Park, CA 94025
+
+ Phone: (415) 322-0103 (AM only)
+ FAX: (415) 322-1734
+ EMail: <ghost@aladdin.com>
+
+ Questions about the technical content of this specification can be
+ sent by email to:
+
+ Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
+ Mark Adler <madler@alumni.caltech.edu>
+
+ Editorial comments on this specification can be sent by email to:
+
+ L. Peter Deutsch <ghost@aladdin.com> and
+ Glenn Randers-Pehrson <randeg@alumni.rpi.edu>
+
+
+
+Deutsch Informational [Page 10]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+7. Appendix: Jean-Loup Gailly's gzip utility
+
+ The most widely used implementation of gzip compression, and the
+ original documentation on which this specification is based, were
+ created by Jean-Loup Gailly <gzip@prep.ai.mit.edu>. Since this
+ implementation is a de facto standard, we mention some more of its
+ features here. Again, the material in this section is not part of
+ the specification per se, and implementations need not follow it to
+ be compliant.
+
+ When compressing or decompressing a file, gzip preserves the
+ protection, ownership, and modification time attributes on the local
+ file system, since there is no provision for representing protection
+ attributes in the gzip file format itself. Since the file format
+ includes a modification time, the gzip decompressor provides a
+ command line switch that assigns the modification time from the file,
+ rather than the local modification time of the compressed input, to
+ the decompressed output.
+
+8. Appendix: Sample CRC Code
+
+ The following sample code represents a practical implementation of
+ the CRC (Cyclic Redundancy Check). (See also ISO 3309 and ITU-T V.42
+ for a formal specification.)
+
+ The sample code is in the ANSI C programming language. Non C users
+ may find it easier to read with these hints:
+
+ & Bitwise AND operator.
+ ^ Bitwise exclusive-OR operator.
+ >> Bitwise right shift operator. When applied to an
+ unsigned quantity, as here, right shift inserts zero
+ bit(s) at the left.
+ ! Logical NOT operator.
+ ++ "n++" increments the variable n.
+ 0xNNN 0x introduces a hexadecimal (base 16) constant.
+ Suffix L indicates a long value (at least 32 bits).
+
+ /* Table of CRCs of all 8-bit messages. */
+ unsigned long crc_table[256];
+
+ /* Flag: has the table been computed? Initially false. */
+ int crc_table_computed = 0;
+
+ /* Make the table for a fast CRC. */
+ void make_crc_table(void)
+ {
+ unsigned long c;
+
+
+
+Deutsch Informational [Page 11]
+
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ int n, k;
+ for (n = 0; n < 256; n++) {
+ c = (unsigned long) n;
+ for (k = 0; k < 8; k++) {
+ if (c & 1) {
+ c = 0xedb88320L ^ (c >> 1);
+ } else {
+ c = c >> 1;
+ }
+ }
+ crc_table[n] = c;
+ }
+ crc_table_computed = 1;
+ }
+
+ /*
+ Update a running crc with the bytes buf[0..len-1] and return
+ the updated crc. The crc should be initialized to zero. Pre- and
+ post-conditioning (one's complement) is performed within this
+ function so it shouldn't be done by the caller. Usage example:
+
+ unsigned long crc = 0L;
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = update_crc(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+ */
+ unsigned long update_crc(unsigned long crc,
+ unsigned char *buf, int len)
+ {
+ unsigned long c = crc ^ 0xffffffffL;
+ int n;
+
+ if (!crc_table_computed)
+ make_crc_table();
+ for (n = 0; n < len; n++) {
+ c = crc_table[(c ^ buf[n]) & 0xff] ^ (c >> 8);
+ }
+ return c ^ 0xffffffffL;
+ }
+
+ /* Return the CRC of the bytes buf[0..len-1]. */
+ unsigned long crc(unsigned char *buf, int len)
+ {
+ return update_crc(0L, buf, len);
+ }
+
+
+
+
+Deutsch Informational [Page 12]
+
diff --git a/zlib/doc/txtvsbin.txt b/zlib/doc/txtvsbin.txt
new file mode 100644
index 000000000..3d0f0634f
--- /dev/null
+++ b/zlib/doc/txtvsbin.txt
@@ -0,0 +1,107 @@
+A Fast Method for Identifying Plain Text Files
+==============================================
+
+
+Introduction
+------------
+
+Given a file coming from an unknown source, it is sometimes desirable
+to find out whether the format of that file is plain text. Although
+this may appear like a simple task, a fully accurate detection of the
+file type requires heavy-duty semantic analysis on the file contents.
+It is, however, possible to obtain satisfactory results by employing
+various heuristics.
+
+Previous versions of PKZip and other zip-compatible compression tools
+were using a crude detection scheme: if more than 80% (4/5) of the bytes
+found in a certain buffer are within the range [7..127], the file is
+labeled as plain text, otherwise it is labeled as binary. A prominent
+limitation of this scheme is the restriction to Latin-based alphabets.
+Other alphabets, like Greek, Cyrillic or Asian, make extensive use of
+the bytes within the range [128..255], and texts using these alphabets
+are most often misidentified by this scheme; in other words, the rate
+of false negatives is sometimes too high, which means that the recall
+is low. Another weakness of this scheme is a reduced precision, due to
+the false positives that may occur when binary files containing large
+amounts of textual characters are misidentified as plain text.
+
+In this article we propose a new, simple detection scheme that features
+a much increased precision and a near-100% recall. This scheme is
+designed to work on ASCII, Unicode and other ASCII-derived alphabets,
+and it handles single-byte encodings (ISO-8859, MacRoman, KOI8, etc.)
+and variable-sized encodings (ISO-2022, UTF-8, etc.). Wider encodings
+(UCS-2/UTF-16 and UCS-4/UTF-32) are not handled, however.
+
+
+The Algorithm
+-------------
+
+The algorithm works by dividing the set of bytecodes [0..255] into three
+categories:
+- The white list of textual bytecodes:
+ 9 (TAB), 10 (LF), 13 (CR), 32 (SPACE) to 255.
+- The gray list of tolerated bytecodes:
+ 7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB), 27 (ESC).
+- The black list of undesired, non-textual bytecodes:
+ 0 (NUL) to 6, 14 to 31.
+
+If a file contains at least one byte that belongs to the white list and
+no byte that belongs to the black list, then the file is categorized as
+plain text; otherwise, it is categorized as binary. (The boundary case,
+when the file is empty, automatically falls into the latter category.)
+
+
+Rationale
+---------
+
+The idea behind this algorithm relies on two observations.
+
+The first observation is that, although the full range of 7-bit codes
+[0..127] is properly specified by the ASCII standard, most control
+characters in the range [0..31] are not used in practice. The only
+widely-used, almost universally-portable control codes are 9 (TAB),
+10 (LF) and 13 (CR). There are a few more control codes that are
+recognized on a reduced range of platforms and text viewers/editors:
+7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB) and 27 (ESC); but these
+codes are rarely (if ever) used alone, without being accompanied by
+some printable text. Even the newer, portable text formats such as
+XML avoid using control characters outside the list mentioned here.
+
+The second observation is that most of the binary files tend to contain
+control characters, especially 0 (NUL). Even though the older text
+detection schemes observe the presence of non-ASCII codes from the range
+[128..255], the precision rarely has to suffer if this upper range is
+labeled as textual, because the files that are genuinely binary tend to
+contain both control characters and codes from the upper range. On the
+other hand, the upper range needs to be labeled as textual, because it
+is used by virtually all ASCII extensions. In particular, this range is
+used for encoding non-Latin scripts.
+
+Since there is no counting involved, other than simply observing the
+presence or the absence of some byte values, the algorithm produces
+consistent results, regardless what alphabet encoding is being used.
+(If counting were involved, it could be possible to obtain different
+results on a text encoded, say, using ISO-8859-16 versus UTF-8.)
+
+There is an extra category of plain text files that are "polluted" with
+one or more black-listed codes, either by mistake or by peculiar design
+considerations. In such cases, a scheme that tolerates a small fraction
+of black-listed codes would provide an increased recall (i.e. more true
+positives). This, however, incurs a reduced precision overall, since
+false positives are more likely to appear in binary files that contain
+large chunks of textual data. Furthermore, "polluted" plain text should
+be regarded as binary by general-purpose text detection schemes, because
+general-purpose text processing algorithms might not be applicable.
+Under this premise, it is safe to say that our detection method provides
+a near-100% recall.
+
+Experiments have been run on many files coming from various platforms
+and applications. We tried plain text files, system logs, source code,
+formatted office documents, compiled object code, etc. The results
+confirm the optimistic assumptions about the capabilities of this
+algorithm.
+
+
+--
+Cosmin Truta
+Last updated: 2006-May-28