305 files changed, 82189 insertions, 90847 deletions

diff --git a/X11/XKBlib.h b/X11/XKBlib.h
index 6a5dc8a7c..019727525 100644
--- a/X11/XKBlib.h
+++ b/X11/XKBlib.h
@@ -7,19 +7,19 @@ software and its documentation for any purpose and without
 fee is hereby granted, provided that the above copyright
 notice appear in all copies and that both that copyright
 notice and this permission notice appear in supporting
-documentation, and that the name of Silicon Graphics not be 
-used in advertising or publicity pertaining to distribution 
+documentation, and that the name of Silicon Graphics not be
+used in advertising or publicity pertaining to distribution
 of the software without specific prior written permission.
-Silicon Graphics makes no representation about the suitability 
+Silicon Graphics makes no representation about the suitability
 of this software for any purpose. It is provided "as is"
 without any express or implied warranty.
 
-SILICON GRAPHICS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS 
-SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 
+SILICON GRAPHICS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
+SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
 AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SILICON
-GRAPHICS BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL 
-DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 
-DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE 
+GRAPHICS BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
+DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
 OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION  WITH
 THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
@@ -78,7 +78,7 @@ typedef struct _XkbMapNotifyEvent {
 	KeyCode		first_key_act;
 	KeyCode		first_key_behavior;
 	KeyCode		first_key_explicit;
-	KeyCode		first_modmap_key;  
+	KeyCode		first_modmap_key;
 	KeyCode		first_vmodmap_key;
 	int		num_key_syms;
 	int		num_key_acts;
@@ -215,7 +215,7 @@ typedef struct _XkbActionMessage {
 	Bool 		key_event_follows;/* true if key event also generated */
 	int		group;		/* effective group */
 	unsigned int	mods;		/* effective mods */
-	char 		message[XkbActionMessageLength+1]; 
+	char 		message[XkbActionMessageLength+1];
 					/* message -- leave space for NUL */
 } XkbActionMessageEvent;
 
@@ -241,8 +241,8 @@ typedef struct _XkbExtensionDeviceNotify {
 	Time 		time;		/* milliseconds */
 	int 		xkb_type;	/* XkbExtensionDeviceNotify */
 	int	 	device;		/* device ID */
-	unsigned int	reason;		/* reason for the event */	
-	unsigned int	supported;	/* mask of supported features */	
+	unsigned int	reason;		/* reason for the event */
+	unsigned int	supported;	/* mask of supported features */
 	unsigned int	unsupported;	/* mask of unsupported features */
 					/* that some app tried to use */
 	int	 	first_btn;	/* first button that changed */
@@ -531,7 +531,7 @@ extern	Bool	 XkbSetIndicatorMap(
 #define	XkbNoteIndicatorStateChanges(o,n,w)\
 				((o)->state_changes|=((n)->state_changes&(w)))
 #define	XkbGetIndicatorMapChanges(d,x,c) \
-				(XkbGetIndicatorMap((d),(c)->map_changes,x)
+				(XkbGetIndicatorMap((d),(c)->map_changes,x))
 #define	XkbChangeIndicatorMaps(d,x,c) \
 				(XkbSetIndicatorMap((d),(c)->map_changes,x))
 
diff --git a/X11/Xlib-xcb.h b/X11/Xlib-xcb.h
index b88e2e7a9..03d8f9867 100644
--- a/X11/Xlib-xcb.h
+++ b/X11/Xlib-xcb.h
@@ -6,10 +6,15 @@
 
 #include <xcb/xcb.h>
 #include <X11/Xlib.h>
+#include <X11/Xfuncproto.h>
+
+_XFUNCPROTOBEGIN
 
 xcb_connection_t *XGetXCBConnection(Display *dpy);
 
 enum XEventQueueOwner { XlibOwnsEventQueue = 0, XCBOwnsEventQueue };
 void XSetEventQueueOwner(Display *dpy, enum XEventQueueOwner owner);
 
+_XFUNCPROTOEND
+
 #endif /* XLIB_XCB_H */
diff --git a/X11/Xlib.h b/X11/Xlib.h
index a26789b1d..2c30bc09e 100644
--- a/X11/Xlib.h
+++ b/X11/Xlib.h
@@ -1,6 +1,6 @@
 /* $XdotOrg: lib/X11/include/X11/Xlib.h,v 1.6 2005-11-08 06:33:25 jkj Exp $ */
 /* $Xorg: Xlib.h,v 1.6 2001/02/09 02:03:38 xorgcvs Exp $ */
-/* 
+/*
 
 Copyright 1985, 1986, 1987, 1991, 1998  The Open Group
 
@@ -38,20 +38,7 @@ in this Software without prior written authorization from The Open Group.
 
 #define XlibSpecificationRelease 6
 
-#ifdef USG
-#ifndef __TYPES__
-#include <sys/types.h>			/* forgot to protect it... */
-#define __TYPES__
-#endif /* __TYPES__ */
-#else
-#if defined(_POSIX_SOURCE) && defined(MOTOROLA)
-#undef _POSIX_SOURCE
 #include <sys/types.h>
-#define _POSIX_SOURCE
-#else
-#include <sys/types.h>
-#endif
-#endif /* USG */
 
 #if defined(__SCO__) || defined(__UNIXWARE__)
 #include <stdint.h>
@@ -64,14 +51,6 @@ in this Software without prior written authorization from The Open Group.
 #include <X11/Xosdefs.h>
 
 #ifndef X_WCHAR
-#ifdef X_NOT_STDC_ENV
-#ifndef ISC
-#define X_WCHAR
-#endif
-#endif
-#endif
-
-#ifndef X_WCHAR
 #include <stddef.h>
 #else
 #ifdef __UNIXOS2__
@@ -84,7 +63,7 @@ typedef unsigned long wchar_t;
 
 #if defined(ISC) && defined(USE_XMBTOWC)
 #define wctomb(a,b)	_Xwctomb(a,b)
-#define mblen(a,b)	_Xmblen(a,b) 
+#define mblen(a,b)	_Xmblen(a,b)
 #ifndef USE_XWCHAR_STRING
 #define mbtowc(a,b,c)	_Xmbtowc(a,b,c)
 #endif
@@ -217,10 +196,10 @@ typedef struct {
 	unsigned long background;/* background pixel */
 	int line_width;		/* line width */
 	int line_style;	 	/* LineSolid, LineOnOffDash, LineDoubleDash */
-	int cap_style;	  	/* CapNotLast, CapButt, 
+	int cap_style;	  	/* CapNotLast, CapButt,
 				   CapRound, CapProjecting */
 	int join_style;	 	/* JoinMiter, JoinRound, JoinBevel */
-	int fill_style;	 	/* FillSolid, FillTiled, 
+	int fill_style;	 	/* FillSolid, FillTiled,
 				   FillStippled, FillOpaeueStippled */
 	int fill_rule;	  	/* EvenOddRule, WindingRule */
 	int arc_mode;		/* ArcChord, ArcPieSlice */
@@ -271,7 +250,7 @@ typedef struct {
 
 /*
  * Depth structure; contains information for each possible depth.
- */	
+ */
 typedef struct {
 	int depth;		/* this depth (Z) of the depth */
 	int nvisuals;		/* number of Visual types at this depth */
@@ -302,7 +281,7 @@ typedef struct {
 	unsigned long black_pixel;	/* White and Black pixel values */
 	int max_maps, min_maps;	/* max and min color maps */
 	int backing_store;	/* Never, WhenMapped, Always */
-	Bool save_unders;	
+	Bool save_unders;
 	long root_input_mask;	/* initial root input mask */
 } Screen;
 
@@ -425,7 +404,7 @@ typedef struct _XImage {
 	} f;
 } XImage;
 
-/* 
+/*
  * Data structure for XReconfigureWindow
  */
 typedef struct {
@@ -446,7 +425,7 @@ typedef struct {
 	char pad;
 } XColor;
 
-/* 
+/*
  * Data structures for graphics operations.  On most machines, these are
  * congruent with the wire protocol structures, so reformatting the data
  * can be avoided on these architectures.
@@ -458,12 +437,12 @@ typedef struct {
 typedef struct {
     short x, y;
 } XPoint;
-    
+
 typedef struct {
     short x, y;
     unsigned short width, height;
 } XRectangle;
-    
+
 typedef struct {
     short x, y;
     unsigned short width, height;
@@ -522,7 +501,7 @@ typedef struct _XDisplay Display;
 struct _XPrivate;		/* Forward declare before use for C++ */
 struct _XrmHashBucketRec;
 
-typedef struct 
+typedef struct
 #ifdef XLIB_ILLEGAL_ACCESS
 _XDisplay
 #endif
@@ -577,7 +556,7 @@ _XDisplay
 	/* there is more to this structure, but it is private to Xlib */
 }
 #ifdef XLIB_ILLEGAL_ACCESS
-Display, 
+Display,
 #endif
 *_XPrivDisplay;
 
@@ -653,7 +632,7 @@ typedef struct {
 	int mode;		/* NotifyNormal, NotifyGrab, NotifyUngrab */
 	int detail;
 	/*
-	 * NotifyAncestor, NotifyVirtual, NotifyInferior, 
+	 * NotifyAncestor, NotifyVirtual, NotifyInferior,
 	 * NotifyNonlinear,NotifyNonlinearVirtual
 	 */
 	Bool same_screen;	/* same screen flag */
@@ -673,9 +652,9 @@ typedef struct {
 				   NotifyGrab, NotifyUngrab */
 	int detail;
 	/*
-	 * NotifyAncestor, NotifyVirtual, NotifyInferior, 
+	 * NotifyAncestor, NotifyVirtual, NotifyInferior,
 	 * NotifyNonlinear,NotifyNonlinearVirtual, NotifyPointer,
-	 * NotifyPointerRoot, NotifyDetailNone 
+	 * NotifyPointerRoot, NotifyDetailNone
 	 */
 } XFocusChangeEvent;
 typedef XFocusChangeEvent XFocusInEvent;
@@ -689,7 +668,7 @@ typedef struct {
 	Display *display;	/* Display the event was read from */
 	Window window;
 	char key_vector[32];
-} XKeymapEvent;	
+} XKeymapEvent;
 
 typedef struct {
 	int type;
@@ -971,6 +950,33 @@ typedef struct {
 	Window window;	/* window on which event was requested in event mask */
 } XAnyEvent;
 
+
+/***************************************************************
+ *
+ * GenericEvent.  This event is the standard event for all newer extensions.
+ */
+
+typedef struct
+    {
+    int            type;         /* of event. Always GenericEvent */
+    unsigned long  serial;       /* # of last request processed */
+    Bool           send_event;   /* true if from SendEvent request */
+    Display        *display;     /* Display the event was read from */
+    int            extension;    /* major opcode of extension that caused the event */
+    int            evtype;       /* actual event type. */
+    } XGenericEvent;
+
+typedef struct {
+    int            type;         /* of event. Always GenericEvent */
+    unsigned long  serial;       /* # of last request processed */
+    Bool           send_event;   /* true if from SendEvent request */
+    Display        *display;     /* Display the event was read from */
+    int            extension;    /* major opcode of extension that caused the event */
+    int            evtype;       /* actual event type. */
+    unsigned int   cookie;
+    void           *data;
+} XGenericEventCookie;
+
 /*
  * this union is defined so Xlib can always use the same sized
  * event structure internally, to avoid memory fragmentation.
@@ -1008,6 +1014,8 @@ typedef union _XEvent {
 	XMappingEvent xmapping;
 	XErrorEvent xerror;
 	XKeymapEvent xkeymap;
+	XGenericEvent xgeneric;
+	XGenericEventCookie xcookie;
 	long pad[24];
 } XEvent;
 #endif
@@ -1248,7 +1256,7 @@ typedef struct {
 typedef unsigned long XIMFeedback;
 
 #define XIMReverse		1L
-#define XIMUnderline		(1L<<1) 
+#define XIMUnderline		(1L<<1)
 #define XIMHighlight		(1L<<2)
 #define XIMPrimary	 	(1L<<5)
 #define XIMSecondary		(1L<<6)
@@ -1260,11 +1268,11 @@ typedef unsigned long XIMFeedback;
 typedef struct _XIMText {
     unsigned short length;
     XIMFeedback *feedback;
-    Bool encoding_is_wchar; 
+    Bool encoding_is_wchar;
     union {
 	char *multi_byte;
 	wchar_t *wide_char;
-    } string; 
+    } string;
 } XIMText;
 
 typedef	unsigned long	 XIMPreeditState;
@@ -1294,11 +1302,11 @@ typedef unsigned long XIMStringConversionFeedback;
 typedef struct _XIMStringConversionText {
     unsigned short length;
     XIMStringConversionFeedback *feedback;
-    Bool encoding_is_wchar; 
+    Bool encoding_is_wchar;
     union {
 	char *mbs;
 	wchar_t *wcs;
-    } string; 
+    } string;
 } XIMStringConversionText;
 
 typedef	unsigned short	XIMStringConversionPosition;
@@ -1320,7 +1328,7 @@ typedef enum {
     XIMForwardWord, XIMBackwardWord,
     XIMCaretUp, XIMCaretDown,
     XIMNextLine, XIMPreviousLine,
-    XIMLineStart, XIMLineEnd, 
+    XIMLineStart, XIMLineEnd,
     XIMAbsolutePosition,
     XIMDontChange
 } XIMCaretDirection;
@@ -1341,7 +1349,7 @@ typedef struct _XIMPreeditDrawCallbackStruct {
 } XIMPreeditDrawCallbackStruct;
 
 typedef enum {
-    XIMIsInvisible,	/* Disable caret feedback */ 
+    XIMIsInvisible,	/* Disable caret feedback */
     XIMIsPrimary,	/* UI defined caret feedback */
     XIMIsSecondary	/* UI defined caret feedback */
 } XIMCaretStyle;
@@ -1356,7 +1364,7 @@ typedef enum {
     XIMTextType,
     XIMBitmapType
 } XIMStatusDataType;
-	
+
 typedef struct _XIMStatusDrawCallbackStruct {
     XIMStatusDataType type;
     union {
@@ -1434,7 +1442,7 @@ extern XModifierKeymap	*XInsertModifiermapEntry(
 #else
     KeyCode		/* keycode_entry */,
 #endif
-    int			/* modifier */    
+    int			/* modifier */
 );
 
 extern XModifierKeymap *XNewModifiermap(
@@ -1480,7 +1488,7 @@ extern XImage *XGetSubImage(
     int			/* dest_y */
 );
 
-/* 
+/*
  * X function declarations.
  */
 extern Display *XOpenDisplay(
@@ -1513,7 +1521,7 @@ extern Status XGetAtomNames(
 extern char *XGetDefault(
     Display*		/* display */,
     _Xconst char*	/* program */,
-    _Xconst char*	/* option */		  
+    _Xconst char*	/* option */
 );
 extern char *XDisplayName(
     _Xconst char*	/* string */
@@ -1539,7 +1547,7 @@ extern int (*XSetAfterFunction(
 extern Atom XInternAtom(
     Display*		/* display */,
     _Xconst char*	/* atom_name */,
-    Bool		/* only_if_exists */		 
+    Bool		/* only_if_exists */
 );
 extern Status XInternAtoms(
     Display*		/* dpy */,
@@ -1556,7 +1564,7 @@ extern Colormap XCreateColormap(
     Display*		/* display */,
     Window		/* w */,
     Visual*		/* visual */,
-    int			/* alloc */			 
+    int			/* alloc */
 );
 extern Cursor XCreatePixmapCursor(
     Display*		/* display */,
@@ -1565,7 +1573,7 @@ extern Cursor XCreatePixmapCursor(
     XColor*		/* foreground_color */,
     XColor*		/* background_color */,
     unsigned int	/* x */,
-    unsigned int	/* y */			   
+    unsigned int	/* y */
 );
 extern Cursor XCreateGlyphCursor(
     Display*		/* display */,
@@ -1602,7 +1610,7 @@ extern Pixmap XCreatePixmap(
     Drawable		/* d */,
     unsigned int	/* width */,
     unsigned int	/* height */,
-    unsigned int	/* depth */		        
+    unsigned int	/* depth */
 );
 extern Pixmap XCreateBitmapFromData(
     Display*		/* display */,
@@ -1649,7 +1657,7 @@ extern Window XCreateWindow(
     Visual*		/* visual */,
     unsigned long	/* valuemask */,
     XSetWindowAttributes*	/* attributes */
-); 
+);
 extern Colormap *XListInstalledColormaps(
     Display*		/* display */,
     Window		/* w */,
@@ -1944,7 +1952,7 @@ extern int XAddHost(
 extern int XAddHosts(
     Display*		/* display */,
     XHostAddress*	/* hosts */,
-    int			/* num_hosts */    
+    int			/* num_hosts */
 );
 
 extern int XAddToExtensionList(
@@ -2167,7 +2175,7 @@ extern int XConfigureWindow(
     Display*		/* display */,
     Window		/* w */,
     unsigned int	/* value_mask */,
-    XWindowChanges*	/* values */		 
+    XWindowChanges*	/* values */
 );
 
 extern int XConnectionNumber(
@@ -2253,7 +2261,7 @@ extern int XDestroySubwindows(
 );
 
 extern int XDoesBackingStore(
-    Screen*		/* screen */    
+    Screen*		/* screen */
 );
 
 extern Bool XDoesSaveUnders(
@@ -2538,7 +2546,7 @@ extern int XFreeCursor(
 );
 
 extern int XFreeExtensionList(
-    char**		/* list */    
+    char**		/* list */
 );
 
 extern int XFreeFont(
@@ -2912,7 +2920,7 @@ extern int XPutImage(
     int			/* dest_x */,
     int			/* dest_y */,
     unsigned int	/* width */,
-    unsigned int	/* height */	  
+    unsigned int	/* height */
 );
 
 extern int XQLength(
@@ -3002,7 +3010,7 @@ extern int XQueryTextExtents(
     int*		/* direction_return */,
     int*		/* font_ascent_return */,
     int*		/* font_descent_return */,
-    XCharStruct*	/* overall_return */    
+    XCharStruct*	/* overall_return */
 );
 
 extern int XQueryTextExtents16(
@@ -3067,7 +3075,7 @@ extern int XRecolorCursor(
 );
 
 extern int XRefreshKeyboardMapping(
-    XMappingEvent*	/* event_map */    
+    XMappingEvent*	/* event_map */
 );
 
 extern int XRemoveFromSaveSet(
@@ -3223,7 +3231,7 @@ extern int XSetFont(
 extern int XSetFontPath(
     Display*		/* display */,
     char**		/* directories */,
-    int			/* ndirs */	     
+    int			/* ndirs */
 );
 
 extern int XSetForeground(
@@ -3522,7 +3530,7 @@ extern int XWarpPointer(
     unsigned int	/* src_width */,
     unsigned int	/* src_height */,
     int			/* dest_x */,
-    int			/* dest_y */	     
+    int			/* dest_y */
 );
 
 extern int XWidthMMOfScreen(
@@ -3547,7 +3555,7 @@ extern int XWriteBitmapFile(
     unsigned int	/* width */,
     unsigned int	/* height */,
     int			/* x_hot */,
-    int			/* y_hot */		     
+    int			/* y_hot */
 );
 
 extern Bool XSupportsLocale (void);
@@ -3955,7 +3963,7 @@ typedef void (*XConnectionWatchProc)(
     Bool			/* opening */,	 /* open or close flag */
     XPointer*			/* watch_data */ /* open sets, close uses */
 );
-    
+
 
 extern Status XInternalConnectionNumbers(
     Display*			/* dpy */,
@@ -3982,7 +3990,7 @@ extern void XRemoveConnectionWatch(
 
 extern void XSetAuthorization(
     char *			/* name */,
-    int				/* namelen */, 
+    int				/* namelen */,
     char *			/* data */,
     int				/* datalen */
 );
@@ -4003,6 +4011,16 @@ extern int _Xwctomb(
     wchar_t			/* wc */
 );
 
+extern Bool XGetEventData(
+    Display*			/* dpy */,
+    XGenericEventCookie*	/* cookie*/
+);
+
+extern void XFreeEventData(
+    Display*			/* dpy */,
+    XGenericEventCookie*	/* cookie*/
+);
+
 _XFUNCPROTOEND
 
 #endif /* _XLIB_H_ */
diff --git a/X11/Xlibint.h b/X11/Xlibint.h
index 8aab764aa..2acfc7690 100644
--- a/X11/Xlibint.h
+++ b/X11/Xlibint.h
@@ -108,7 +108,7 @@ struct _XDisplay
 	int nscreens;		/* number of screens on this server*/
 	Screen *screens;	/* pointer to list of screens */
 	unsigned long motion_buffer;	/* size of motion buffer */
-	unsigned long flags;	   /* internal connection flags */
+	volatile unsigned long flags;	   /* internal connection flags */
 	int min_keycode;	/* minimum defined keycode */
 	int max_keycode;	/* maximum defined keycode */
 	KeySym *keysyms;	/* This server's keysyms */
@@ -121,7 +121,7 @@ struct _XDisplay
 	struct _XExten *ext_procs; /* extensions initialized on this display */
 	/*
 	 * the following can be fixed size, as the protocol defines how
-	 * much address space is available. 
+	 * much address space is available.
 	 * While this could be done using the extension vector, there
 	 * may be MANY events processed, so a search through the extension
 	 * list to find the right procedure for each event might be
@@ -185,6 +185,20 @@ struct _XDisplay
 	struct _XkbInfoRec *xkb_info; /* XKB info */
 	struct _XtransConnInfo *trans_conn; /* transport connection object */
 	struct _X11XCBPrivate *xcb; /* XCB glue private data */
+
+	/* Generic event cookie handling */
+	unsigned int next_cookie; /* next event cookie */
+	/* vector for wire to generic event, index is (extension - 128) */
+	Bool (*generic_event_vec[128])(
+		Display *	/* dpy */,
+		XGenericEventCookie *	/* Xlib event */,
+		xEvent *	/* wire event */);
+	/* vector for event copy, index is (extension - 128) */
+	Bool (*generic_event_copy_vec[128])(
+		Display *	/* dpy */,
+		XGenericEventCookie *	/* in */,
+		XGenericEventCookie *   /* out*/);
+	void *cookiejar;  /* cookie events returned but not claimed */
 };
 
 #define XAllocIDs(dpy,ids,n) (*(dpy)->idlist_alloc)(dpy,ids,n)
@@ -417,7 +431,7 @@ extern LockInfoPtr _Xglobal_lock;
 
 /*
  * GetReq - Get the next available X request packet in the buffer and
- * return it. 
+ * return it.
  *
  * "name" is the name of the request, e.g. CreatePixmap, OpenFont, etc.
  * "req" is the name of the request pointer.
@@ -474,9 +488,9 @@ extern LockInfoPtr _Xglobal_lock;
 
 
 /*
- * GetResReq is for those requests that have a resource ID 
+ * GetResReq is for those requests that have a resource ID
  * (Window, Pixmap, GContext, etc.) as their single argument.
- * "rid" is the name of the resource. 
+ * "rid" is the name of the resource.
  */
 
 #if !defined(UNIXCPP) || defined(ANSICPP)
@@ -505,7 +519,7 @@ extern LockInfoPtr _Xglobal_lock;
 
 /*
  * GetEmptyReq is for those requests that have no arguments
- * at all. 
+ * at all.
  */
 #if !defined(UNIXCPP) || defined(ANSICPP)
 #define GetEmptyReq(name, req) \
@@ -611,7 +625,7 @@ extern void _XFlushGCCache(Display *dpy, GC gc);
  * "ptr" is the pointer being assigned to.
  * "n" is the number of bytes to allocate.
  *
- * Example: 
+ * Example:
  *    xTextElt *elt;
  *    BufAlloc (xTextElt *, elt, nbytes)
  */
@@ -661,7 +675,7 @@ extern void _XRead32(
 			     (((cs)->rbearing|(cs)->lbearing| \
 			       (cs)->ascent|(cs)->descent) == 0))
 
-/* 
+/*
  * CI_GET_CHAR_INFO_1D - return the charinfo struct for the indicated 8bit
  * character.  If the character is in the column and exists, then return the
  * appropriate metrics (note that fonts with common per-character metrics will
@@ -687,7 +701,7 @@ extern void _XRead32(
 
 
 /*
- * CI_GET_CHAR_INFO_2D - return the charinfo struct for the indicated row and 
+ * CI_GET_CHAR_INFO_2D - return the charinfo struct for the indicated row and
  * column.  This is used for fonts that have more than row zero.
  */
 #define CI_GET_CHAR_INFO_2D(fs,row,col,def,cs) \
@@ -959,9 +973,6 @@ extern void _XGetAsyncData(
     int		/* datalen */,
     int		/* discardtotal */
 );
-extern void _XSetSeqSyncFunction(
-    Display*	/* dpy */
-);
 extern void _XFlush(
     Display*	/* dpy */
 );
@@ -1008,6 +1019,19 @@ extern Bool _XUnknownWireEvent(
     XEvent*	/* re */,
     xEvent*	/* event */
 );
+
+extern Bool _XUnknownWireEventCookie(
+    Display*	/* dpy */,
+    XGenericEventCookie*	/* re */,
+    xEvent*	/* event */
+);
+
+extern Bool _XUnknownCopyEventCookie(
+    Display*	/* dpy */,
+    XGenericEventCookie*	/* in */,
+    XGenericEventCookie*	/* out */
+);
+
 extern Status _XUnknownNativeEvent(
     Display*	/* dpy */,
     XEvent*	/* re */,
@@ -1045,7 +1069,7 @@ extern int (*XESetCopyGC(
 	      Display*			/* display */,
               GC			/* gc */,
               XExtCodes*		/* codes */
-            )		/* proc */	      
+            )		/* proc */
 ))(
     Display*, GC, XExtCodes*
 );
@@ -1057,7 +1081,7 @@ extern int (*XESetFlushGC(
 	      Display*			/* display */,
               GC			/* gc */,
               XExtCodes*		/* codes */
-            )		/* proc */	     
+            )		/* proc */
 ))(
     Display*, GC, XExtCodes*
 );
@@ -1069,7 +1093,7 @@ extern int (*XESetFreeGC(
 	      Display*			/* display */,
               GC			/* gc */,
               XExtCodes*		/* codes */
-            )		/* proc */	     
+            )		/* proc */
 ))(
     Display*, GC, XExtCodes*
 );
@@ -1081,7 +1105,7 @@ extern int (*XESetCreateFont(
 	      Display*			/* display */,
               XFontStruct*		/* fs */,
               XExtCodes*		/* codes */
-            )		/* proc */    
+            )		/* proc */
 ))(
     Display*, XFontStruct*, XExtCodes*
 );
@@ -1093,10 +1117,10 @@ extern int (*XESetFreeFont(
 	      Display*			/* display */,
               XFontStruct*		/* fs */,
               XExtCodes*		/* codes */
-            )		/* proc */    
+            )		/* proc */
 ))(
     Display*, XFontStruct*, XExtCodes*
-); 
+);
 
 extern int (*XESetCloseDisplay(
     Display*		/* display */,
@@ -1104,7 +1128,7 @@ extern int (*XESetCloseDisplay(
     int (*) (
 	      Display*			/* display */,
               XExtCodes*		/* codes */
-            )		/* proc */    
+            )		/* proc */
 ))(
     Display*, XExtCodes*
 );
@@ -1117,7 +1141,7 @@ extern int (*XESetError(
               xError*			/* err */,
               XExtCodes*		/* codes */,
               int*			/* ret_code */
-            )		/* proc */    
+            )		/* proc */
 ))(
     Display*, xError*, XExtCodes*, int*
 );
@@ -1131,7 +1155,7 @@ extern char* (*XESetErrorString(
                 XExtCodes*		/* codes */,
                 char*			/* buffer */,
                 int			/* nbytes */
-              )		/* proc */	       
+              )		/* proc */
 ))(
     Display*, int, XExtCodes*, char*, int
 );
@@ -1155,11 +1179,36 @@ extern Bool (*XESetWireToEvent(
 	       Display*			/* display */,
                XEvent*			/* re */,
                xEvent*			/* event */
-             )		/* proc */    
+             )		/* proc */
 ))(
     Display*, XEvent*, xEvent*
 );
 
+extern Bool (*XESetWireToEventCookie(
+    Display*		/* display */,
+    int			/* extension */,
+    Bool (*) (
+	       Display*			/* display */,
+               XGenericEventCookie*	/* re */,
+               xEvent*			/* event */
+             )		/* proc */
+))(
+    Display*, XGenericEventCookie*, xEvent*
+);
+
+extern Bool (*XESetCopyEventCookie(
+    Display*		/* display */,
+    int			/* extension */,
+    Bool (*) (
+	       Display*			/* display */,
+               XGenericEventCookie*	/* in */,
+               XGenericEventCookie*	/* out */
+             )		/* proc */
+))(
+    Display*, XGenericEventCookie*, XGenericEventCookie*
+);
+
+
 extern Status (*XESetEventToWire(
     Display*		/* display */,
     int			/* event_number */,
@@ -1167,7 +1216,7 @@ extern Status (*XESetEventToWire(
 	      Display*			/* display */,
               XEvent*			/* re */,
               xEvent*			/* event */
-            )		/* proc */   
+            )		/* proc */
 ))(
     Display*, XEvent*, xEvent*
 );
@@ -1179,7 +1228,7 @@ extern Bool (*XESetWireToError(
 	       Display*			/* display */,
 	       XErrorEvent*		/* he */,
 	       xError*			/* we */
-            )		/* proc */   
+            )		/* proc */
 ))(
     Display*, XErrorEvent*, xError*
 );
@@ -1192,7 +1241,7 @@ extern void (*XESetBeforeFlush(
 	       XExtCodes*		/* codes */,
 	       _Xconst char*		/* data */,
 	       long			/* len */
-            )		/* proc */   
+            )		/* proc */
 ))(
     Display*, XExtCodes*, _Xconst char*, long
 );
@@ -1321,9 +1370,29 @@ Status _XGetWindowAttributes(
     XWindowAttributes *attr);
 
 int _XPutBackEvent (
-    register Display *dpy, 
+    register Display *dpy,
     register XEvent *event);
 
+extern Bool _XIsEventCookie(
+        Display *dpy,
+        XEvent *ev);
+
+extern void _XFreeEventCookies(
+        Display *dpy);
+
+extern void _XStoreEventCookie(
+        Display *dpy,
+        XEvent *ev);
+
+extern Bool _XFetchEventCookie(
+        Display *dpy,
+        XGenericEventCookie *ev);
+
+extern Bool _XCopyEventCookie(
+        Display *dpy,
+        XGenericEventCookie *in,
+        XGenericEventCookie *out);
+
 _XFUNCPROTOEND
 
 #endif /* _XLIBINT_H_ */
diff --git a/X11/cursorfont.h b/X11/cursorfont.h
index c6204f1c5..8fb165cf0 100644
--- a/X11/cursorfont.h
+++ b/X11/cursorfont.h
@@ -27,6 +27,9 @@ from The Open Group.
 
 */
 
+#ifndef _cursorfont_h_
+#define _cursorfont_h_
+
 #define XC_num_glyphs 154
 #define XC_X_cursor 0
 #define XC_arrow 2
@@ -105,3 +108,5 @@ from The Open Group.
 #define XC_ur_angle 148
 #define XC_watch 150
 #define XC_xterm 152
+
+#endif /* _cursorfont_h_ */
diff --git a/X11/extensions/COPYING b/X11/extensions/COPYING
index a32b353d6..23135f95a 100644
--- a/X11/extensions/COPYING
+++ b/X11/extensions/COPYING
@@ -177,3 +177,25 @@ suitability of this software for any purpose.  It is provided
 This software is not subject to any license of the American
 Telephone and Telegraph Company or of the Regents of the
 University of California.
+
+
+Copyright © 2007-2008 Peter Hutterer
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice (including the next
+paragraph) shall be included in all copies or substantial portions of the
+Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
diff --git a/X11/extensions/ChangeLog b/X11/extensions/ChangeLog
index d6b7bcfb1..c20b3a472 100644
--- a/X11/extensions/ChangeLog
+++ b/X11/extensions/ChangeLog
@@ -1,3 +1,279 @@
+commit 987aeb9bd1915a655f31e250ee9c02d04927b150
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Tue Aug 25 09:30:15 2009 +1000
+
+    xextproto 7.1.1
+
+commit 55a0bbdde9b27b8dbc6e75d41c51af3f92dea6e3
+Author: Eduard Bagrov <ebagrov@linuxtesting.org>
+Date:   Fri Aug 21 18:48:19 2009 +0200
+
+    Fix XSyncValueSubtract typo
+    
+    X.Org bug#23438 <http://bugs.freedesktop.org/show_bug.cgi?id=23438>
+    
+    Signed-off-by: Julien Cristau <jcristau@debian.org>
+
+commit 23ac4d5235862d51f0cfb080ad2118a9fb181673
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Wed Aug 5 15:09:11 2009 +1000
+
+    xextproto 7.1.0
+
+commit 5ffa318ddb35308e3a87122bfb3944e3201532ba
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Wed Aug 5 15:06:52 2009 +1000
+
+    lbxproto: remove debug macro and definition of lbxDebug.
+    
+    This should not be in the protocol headers.
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 5a266968b1ced367df1a47dc9729313c85be0516
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Wed Jul 22 20:26:35 2009 +1000
+
+    Bump to 7.0.99.3
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit d7ead7a591da851f6bb2efecdd35b63836df4ed0
+Author: Magnus Kessler <Magnus.Kessler@gmx.net>
+Date:   Wed Jul 22 09:37:38 2009 +0100
+
+    Rename xtest.h to xtestconst.h to avoid a collision with XTest.h on case-insensitive filesystems
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 2fd05eca7dd501c58b284d9cceb73d6146672b0a
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Tue Jul 21 13:35:58 2009 +1000
+
+    Bump to 7.0.99.2
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit a049c37f789f881fad09e60a061488cba2b4072e
+Author: Jon TURNEY <jon.turney@dronecode.org.uk>
+Date:   Mon Jul 20 22:42:59 2009 +0100
+
+    Rename mitmisc.h to mitmiscconst.h to avoid a collision with MITMisc.h on case-insensitive filesystems
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 609c3b03fbed24f05d636d98dad9febc7226624c
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Wed Jul 15 16:28:12 2009 +1000
+
+    Remove RCS tags.
+
+commit 6e9e47edf97a0bb504b4b65f5ef066f3d5e3d34b
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Wed Jul 15 16:20:13 2009 +1000
+
+    Bump to 7.0.99.1
+
+commit ef8766e44c5cdd1e3ba7ebabf576e2de77f57a09
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:43:12 2009 +1000
+
+    xtestext1: split xtestext1.h header into xtestext1proto.h
+
+commit a1f0b58efce74176c71070818fa98c25021bb25e
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:36:22 2009 +1000
+
+    sync: remove sync.h library header, split into syncconst.h
+    
+    Rename syncstr.h to syncproto.h
+
+commit 35ec2669091197a4e5b3c56d79ea26ae87759b16
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:32:29 2009 +1000
+
+    shape: remove shape.h, split into shapeconst.h
+    
+    Rename shapestr.h to shapeproto.h
+
+commit 7cfdafd5ec565502a40e9e1f5b3edbb2be6aafbc
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:30:17 2009 +1000
+
+    security: remove security.h, split into secur.h
+    
+    Rename securstr.h to securproto.h
+
+commit 19f527b4abe17b58dd78ec988a11c8081166cf01
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:28:02 2009 +1000
+
+    multibuf: remove multibuf.h, split into multibufconst.h
+
+commit 4b7fff5309f3e51e17372e3eaf91ee01c00ffd08
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:19:04 2009 +1000
+
+    remove extutil.h, pure library header
+
+commit 0af7f152239a0f14fc85acd146845c784bb1cd6a
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:18:06 2009 +1000
+
+    dpms: remove dpms.h library header, split into dpmsconst.h
+
+commit ac0dfab3fe1ae9c9633696825636a4bcfa14dfd6
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:14:14 2009 +1000
+
+    Remove Xext.h and Xge.h - pure library headers.
+
+commit 413572e112e24aa7a28632e13a8aa15c9fdaa57e
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:10:01 2009 +1000
+
+    Xdbe: remove Xdbe.h library header, split into dbe.h
+    
+    Rename Xdbeproto to dbeproto.h
+
+commit d2574e8804a204653bda1786c1ece3437f7901a2
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 11:04:12 2009 +1000
+
+    Xcup: remove XCup.h library header, split into cup.h
+    
+    Rename Xcupstr.h to cupproto.h
+
+commit 38daa9d8d9d86f3b9df12dd5032959822b7c0a45
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 10:59:10 2009 +1000
+
+    Xag: remove Xag.h library header, split into Xagconst.h
+
+commit 8cb2568c4a7df1eb0482009bf9150912e98969e6
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 10:54:21 2009 +1000
+
+    XTest: remove XTest.h, split into xtest.h and xtestproto.h
+    
+    To avoid conflicts, xtest.h uses a XTEST_CONST_H include barrier.
+
+commit c63abdd1eb7bc1d8ae4e25073ef2f29d94991e2b
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 10:46:33 2009 +1000
+
+    XShm: remove XShm.h library header, split into shm.h, shmproto.h
+    
+    Removing Xlib function prototypes.
+    Move extension name to shm.h
+    Move protocol request opcodes to shmproto.h
+
+commit 0adb09e032e3bd56426620b19438be9c0c66dd54
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 10:43:32 2009 +1000
+
+    XLbx: remove XLbx library headers, split into lbx.h, lbxproto.h
+    
+    Remove Xlib function prototypes.
+    Move extension name into lbx.h, move protocol opcodes into lbxproto.h
+
+commit 727003b51844dd1bd41b668bedfa92d2bb7ef964
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 10:30:40 2009 +1000
+
+    XEVI: remove XEVI.h library header, split into EVIproto.h
+    
+    Remove Xlib function prototypes.
+    Move protocol opcodes to EVIproto.h
+    Move extension name from EVIproto.h into EVI.h
+
+commit 3770d4bd035e43c8e2228d45184d9d398fccb325
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Jun 25 10:24:57 2009 +1000
+
+    MITMisc: remove MITMisc.h library header, split into mitmistproto.h
+    
+    Moving extension name from mitmiststr.h into mitmisc.h.
+    Removing Xlib function prototypes from mitmisc.h.
+    Moving protocol request opcodes into mitmiscproto.h
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 57d09e47d05fce0d6df4060b2eff9a8efcc25b2f
+Author: Adam Jackson <ajax@redhat.com>
+Date:   Wed Jul 15 13:41:36 2009 -0400
+
+    Remove most LBX headers.
+    
+    XLbx.h and lbxstr.h are required for libXext to build, and we're not
+    allowed to remove API from that.
+
+commit 7629def0733b82687f2879095451d72e42e13db7
+Author: James Cloos <cloos@jhcloos.com>
+Date:   Sat Mar 28 14:20:38 2009 -0400
+
+    C sucks: define XEventClass in terms of unsigned int, not CARD32.
+    
+    Apparently pulling in Xmd.h here breaks qt, since they both define an
+    INT32 type (and incompatible ones even, since Xmd's is unsigned long on
+    ILP32 because whoever wrote Xmd.h is a C novice).
+    
+    (Based on inputproto commit b5cbe2d93f6c0129b8f29da97778f6d1b15c38f9.
+    Patch submitted to xorg@ in <20090117121713.46bf3332@family.dyweni.com>.)
+
+commit ac98d8c559dc798f09e35d13f51cb1116c6378bb
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date:   Thu Jan 29 16:22:20 2009 -0200
+
+    Bump to libXext Version 7.0.5.
+    
+      Add required change to correct #18038
+    (patch to avoid gcc warning in libXext)
+
+commit 8b5b82ec72dd6952d0664655715a0a47951454f4
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date:   Tue Jan 27 20:06:28 2009 -0200
+
+    Janitor: Correct make distcheck and dont distribute autogen.sh
+
+commit fa652c6013a5d3ae8106814d97245fdbac3557ac
+Author: Julien Cristau <jcristau@debian.org>
+Date:   Tue Dec 23 16:16:46 2008 +0100
+
+    Add geproto.txt to EXTRA_DIST
+
+commit bd7f3e16b5a5520f0abb8c481f23a19219d26c7f
+Author: Julien Cristau <jcristau@debian.org>
+Date:   Tue Dec 23 15:45:13 2008 +0100
+
+    COPYING: add Peter Hutterer's license and copyright notice
+    
+    Taken from Xge.h
+
+commit e1773d8ad7d36535f856dcb308be9a1b0601c1fc
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Dec 18 10:10:42 2008 +1000
+
+    Bump to 7.0.4
+
+commit e7f0c4261c59da82da1c151dd1bd0d143a32906a
+Author: Peter Hutterer <peter.hutterer@redhat.com>
+Date:   Mon Dec 1 14:44:03 2008 +1000
+
+    Clean up XGE documentation.
+
+commit b0080664e432f8ee569ce099a536c0232dd64d3e
+Author: Peter Hutterer <peter.hutterer@redhat.com>
+Date:   Mon Dec 1 15:41:16 2008 +1000
+
+    geproto: remote trailing whitespaces.
+
+commit f7e5f23e37e62cc0a981d9b002b69d90b8a7daa9
+Author: Peter Hutterer <peter.hutterer@redhat.com>
+Date:   Fri Sep 26 14:54:19 2008 +0930
+
+    Xge.h: include Xmd.h for CARD8
+
 commit db08133016b421ef12c65db9c4a2819078f01b06
 Author: Peter Hutterer <peter@cs.unisa.edu.au>
 Date:   Wed May 28 17:18:14 2008 +0930
@@ -11,7 +287,7 @@ Date:   Mon May 12 17:26:02 2008 +0930
     Xge: replace copyrights with standard format from xserver COPYING.
 
 commit 9dc48efe2b3136756613ae00afd706f9a52d6f10
-Merge: 69356e4... a07a30f...
+Merge: 69356e4 a07a30f
 Author: Peter Hutterer <peter@cs.unisa.edu.au>
 Date:   Mon May 12 17:22:14 2008 +0930
 
diff --git a/X11/extensions/Makefile.am b/X11/extensions/Makefile.am
index fe47e2578..8cdd0ac97 100644
--- a/X11/extensions/Makefile.am
+++ b/X11/extensions/Makefile.am
@@ -1,48 +1,40 @@
 xextdir = $(includedir)/X11/extensions
 xext_HEADERS = \
-	dpms.h \
-	dpmsstr.h \
-	extutil.h \
+	dpmsconst.h \
+	dpmsproto.h \
         ge.h \
         geproto.h \
-        Xge.h \
-	lbxbuf.h \
-	lbxbufstr.h \
-	lbxdeltastr.h \
-	lbximage.h \
-	lbxopts.h \
-	lbxstr.h \
-	lbxzlib.h \
-	MITMisc.h \
-	mitmiscstr.h \
-	multibuf.h \
-	multibufst.h \
-	security.h \
-	securstr.h \
-	shape.h \
-	shapestr.h \
-	shmstr.h \
-	sync.h \
-	syncstr.h \
-	Xag.h \
-	Xagstr.h \
-	Xcup.h \
-	Xcupstr.h \
-	Xdbe.h \
-	Xdbeproto.h \
-	XEVI.h \
-	XEVIstr.h \
-	Xext.h \
-	XLbx.h \
-	XShm.h \
-	xtestext1.h \
-	XTest.h \
-	xteststr.h
+	lbx.h \
+	lbxproto.h \
+	mitmiscconst.h \
+	mitmiscproto.h \
+	multibufconst.h \
+	multibufproto.h \
+	secur.h \
+	securproto.h \
+	shapeconst.h \
+	shapeproto.h \
+	shm.h \
+	shmproto.h \
+	syncconst.h \
+	syncproto.h \
+	ag.h \
+	agproto.h \
+	cup.h \
+	cupproto.h \
+	dbe.h \
+	dbeproto.h \
+	EVI.h \
+	EVIproto.h \
+	xtestext1proto.h \
+	xtestext1const.h \
+	xtestconst.h \
+	xtestproto.h
 
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = xextproto.pc
 
-EXTRA_DIST = autogen.sh xextproto.pc.in
+EXTRA_DIST = xextproto.pc.in geproto.txt
 
 EXTRA_DIST += ChangeLog
 MAINTAINERCLEANFILES = ChangeLog
@@ -50,6 +42,6 @@ MAINTAINERCLEANFILES = ChangeLog
 .PHONY: ChangeLog
 
 ChangeLog:
-	(GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
+	$(CHANGELOG_CMD)
 
 dist-hook: ChangeLog
diff --git a/X11/extensions/Makefile.in b/X11/extensions/Makefile.in
index d3029ac0b..a30a0e982 100644
--- a/X11/extensions/Makefile.in
+++ b/X11/extensions/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,15 +16,12 @@
 @SET_MAKE@
 
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -45,15 +43,35 @@ am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(mkdir_p)
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES = xextproto.pc
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xextdir)"
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(pkgconfig_DATA)
-xextHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(xext_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -61,24 +79,25 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+CHANGELOG_CMD = @CHANGELOG_CMD@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -87,6 +106,7 @@ LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -98,11 +118,19 @@ SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build_alias = @build_alias@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
+distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
@@ -124,52 +152,48 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 xextdir = $(includedir)/X11/extensions
 xext_HEADERS = \
-	dpms.h \
-	dpmsstr.h \
-	extutil.h \
+	dpmsconst.h \
+	dpmsproto.h \
         ge.h \
         geproto.h \
-        Xge.h \
-	lbxbuf.h \
-	lbxbufstr.h \
-	lbxdeltastr.h \
-	lbximage.h \
-	lbxopts.h \
-	lbxstr.h \
-	lbxzlib.h \
-	MITMisc.h \
-	mitmiscstr.h \
-	multibuf.h \
-	multibufst.h \
-	security.h \
-	securstr.h \
-	shape.h \
-	shapestr.h \
-	shmstr.h \
-	sync.h \
-	syncstr.h \
-	Xag.h \
-	Xagstr.h \
-	Xcup.h \
-	Xcupstr.h \
-	Xdbe.h \
-	Xdbeproto.h \
-	XEVI.h \
-	XEVIstr.h \
-	Xext.h \
-	XLbx.h \
-	XShm.h \
-	xtestext1.h \
-	XTest.h \
-	xteststr.h
+	lbx.h \
+	lbxproto.h \
+	mitmiscconst.h \
+	mitmiscproto.h \
+	multibufconst.h \
+	multibufproto.h \
+	secur.h \
+	securproto.h \
+	shapeconst.h \
+	shapeproto.h \
+	shm.h \
+	shmproto.h \
+	syncconst.h \
+	syncproto.h \
+	ag.h \
+	agproto.h \
+	cup.h \
+	cupproto.h \
+	dbe.h \
+	dbeproto.h \
+	EVI.h \
+	EVIproto.h \
+	xtestext1proto.h \
+	xtestext1const.h \
+	xtestconst.h \
+	xtestproto.h
 
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = xextproto.pc
-EXTRA_DIST = autogen.sh xextproto.pc.in ChangeLog
+EXTRA_DIST = xextproto.pc.in geproto.txt ChangeLog
 MAINTAINERCLEANFILES = ChangeLog
 all: all-am
 
@@ -180,15 +204,15 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -204,142 +228,163 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
 	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 xextproto.pc: $(top_builddir)/config.status $(srcdir)/xextproto.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
-uninstall-info-am:
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 	done
 
 uninstall-pkgconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
-	done
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
 install-xextHEADERS: $(xext_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(xextdir)" || $(mkdir_p) "$(DESTDIR)$(xextdir)"
-	@list='$(xext_HEADERS)'; for p in $$list; do \
+	test -z "$(xextdir)" || $(MKDIR_P) "$(DESTDIR)$(xextdir)"
+	@list='$(xext_HEADERS)'; test -n "$(xextdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(xextHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(xextdir)/$$f'"; \
-	  $(xextHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(xextdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(xextdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(xextdir)" || exit $$?; \
 	done
 
 uninstall-xextHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(xext_HEADERS)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " rm -f '$(DESTDIR)$(xextdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(xextdir)/$$f"; \
-	done
+	@list='$(xext_HEADERS)'; test -n "$(xextdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(xextdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(xextdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/.
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
 	$(MAKE) $(AM_MAKEFLAGS) \
 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
 	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
 dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
 	$(am__remove_distdir)
 
 dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
 
 dist-shar: distdir
@@ -352,8 +397,8 @@ dist-zip: distdir
 	$(am__remove_distdir)
 
 dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
@@ -362,11 +407,15 @@ dist dist-all: distdir
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
@@ -376,9 +425,11 @@ distcheck: dist
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
@@ -400,13 +451,15 @@ distcheck: dist
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
@@ -428,7 +481,7 @@ check: check-am
 all-am: Makefile $(DATA) $(HEADERS)
 installdirs:
 	for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xextdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -449,7 +502,8 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -470,18 +524,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am: install-pkgconfigDATA install-xextHEADERS
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -502,29 +576,33 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-pkgconfigDATA \
-	uninstall-xextHEADERS
+uninstall-am: uninstall-pkgconfigDATA uninstall-xextHEADERS
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
 	clean-generic ctags dist dist-all dist-bzip2 dist-gzip \
-	dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-generic distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-pkgconfigDATA install-strip install-xextHEADERS \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags uninstall uninstall-am uninstall-info-am \
-	uninstall-pkgconfigDATA uninstall-xextHEADERS
+	dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+	distcheck distclean distclean-generic distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-pkgconfigDATA install-ps install-ps-am install-strip \
+	install-xextHEADERS installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-pkgconfigDATA uninstall-xextHEADERS
 
 
 .PHONY: ChangeLog
 
 ChangeLog:
-	(GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
+	$(CHANGELOG_CMD)
 
 dist-hook: ChangeLog
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/X11/extensions/XI2proto.h b/X11/extensions/XI2proto.h
index e6ec190cb..2fd91ebf1 100644
--- a/X11/extensions/XI2proto.h
+++ b/X11/extensions/XI2proto.h
@@ -48,12 +48,6 @@
  */
 
 /**
- * @mainpage
- * @include XI2proto.txt
- */
-
-/**
- * @file XI2proto.h
  * Protocol definitions for the XI2 protocol.
  * This file should not be included by clients that merely use XI2, but do not
  * need the wire protocol. Such clients should include XI2.h, or the matching
@@ -75,8 +69,6 @@
 
 /**
  * XI2 Request opcodes
- * @addtogroup XI2Requests
- * @{
  */
 #define X_XIQueryPointer                40
 #define X_XIWarpPointer                 41
@@ -99,7 +91,6 @@
 #define X_XIDeleteProperty              58
 #define X_XIGetProperty                 59
 #define X_XIGetSelectedEvents           60
-/*@}*/
 
 /** Number of XI requests */
 #define XI2REQUESTS (X_XIGetSelectedEvents - X_XIQueryPointer + 1)
@@ -121,7 +112,6 @@ typedef struct {
 } FP3232;
 
 /**
- * \struct xXIDeviceInfo
  * Struct to describe a device.
  *
  * For a MasterPointer or a MasterKeyboard, 'attachment' specifies the
@@ -129,8 +119,6 @@ typedef struct {
  * For a SlaveKeyboard or SlavePointer, 'attachment' specifies the master
  * device this device is attached to.
  * For a FloatingSlave, 'attachment' is undefined.
- *
- * @see xXIQueryDeviceReq
  */
 typedef struct {
     uint16_t    deviceid;
@@ -145,13 +133,9 @@ typedef struct {
 } xXIDeviceInfo;
 
 /**
- * \struct xXIAnyInfo
  * Default template for a device class.
  * A device class is equivalent to a device's capabilities. Multiple classes
  * are supported per device.
- *
- * @see xXIQueryDeviceReq
- * @see xXIDeviceChangedEvent
  */
 typedef struct {
     uint16_t    type;           /**< One of *class */
@@ -164,9 +148,6 @@ typedef struct {
  * Denotes button capability on a device.
  * Struct is followed by num_buttons * Atom that names the buttons in the
  * device-native setup (i.e. ignoring button mappings).
- *
- * @see xXIQueryDeviceReq
- * @see xXIDeviceChangedEvent
  */
 typedef struct {
     uint16_t    type;           /**< Always ButtonClass */
@@ -179,9 +160,6 @@ typedef struct {
  * Denotes key capability on a device.
  * Struct is followed by num_keys * CARD32 that lists the keycodes available
  * on the device.
- *
- * @see xXIQueryDeviceReq
- * @see xXIDeviceChangedEvent
  */
 typedef struct {
     uint16_t    type;           /**< Always KeyClass */
@@ -193,9 +171,6 @@ typedef struct {
 /**
  * Denotes an valuator capability on a device.
  * One XIValuatorInfo describes exactly one valuator (axis) on the device.
- *
- * @see xXIQueryDevice
- * @see xXIDeviceChangedEvent
  */
 typedef struct {
     uint16_t    type;           /**< Always ValuatorClass       */
@@ -218,8 +193,6 @@ typedef struct {
  * Struct is followed by (mask_len * CARD8), with each bit set representing
  * the event mask for the given type. A mask bit represents an event type if
  * (mask == (1 << type)).
- *
- * @see XISelectEvents
  */
 typedef struct {
     uint16_t    deviceid;       /**< Device id to select for        */
@@ -260,7 +233,6 @@ typedef struct
  *************************************************************************************/
 
 /**
- * @struct xXIQueryVersionReq
  * Query the server for the supported X Input extension version.
  */
 
@@ -289,12 +261,9 @@ typedef struct {
 #define sz_xXIQueryVersionReply             32
 
 /**
- * @struct xXIQueryDeviceReq
  * Query the server for information about a specific device or all input
  * devices.
- *
  */
-
 typedef struct {
     uint8_t     reqType;                /**< Input extension major code */
     uint8_t     ReqType;                /**< Always ::X_XIQueryDevice */
@@ -320,7 +289,6 @@ typedef struct {
 #define sz_xXIQueryDeviceReply                  32
 
 /**
- * @struct xXISelectEventsReq
  * Select for events on a given window.
  */
 typedef struct {
@@ -334,7 +302,6 @@ typedef struct {
 #define sz_xXISelectEventsReq                  12
 
 /**
- * @struct xXIGetSelectedEventsReq
  * Query for selected events on a given window.
  */
 typedef struct {
@@ -362,7 +329,6 @@ typedef struct {
 #define sz_xXIGetSelectedEventsReply            32
 
 /**
- * @struct xXIQueryPointerReq
  * Query the given device's screen/window coordinates.
  */
 
@@ -397,7 +363,6 @@ typedef struct {
 #define sz_xXIQueryPointerReply                 56
 
 /**
- * @struct xXIWarpPointerReq
  * Warp the given device's pointer to the specified position.
  */
 
@@ -407,19 +372,18 @@ typedef struct {
     uint16_t    length;                 /**< Length in 4 byte units */
     Window      src_win;
     Window      dst_win;
-    INT16       src_x;
-    INT16       src_y;
+    FP1616      src_x;
+    FP1616      src_y;
     uint16_t    src_width;
     uint16_t    src_height;
-    INT16       dst_x;
-    INT16       dst_y;
+    FP1616      dst_x;
+    FP1616      dst_y;
     uint16_t    deviceid;
     uint16_t    pad1;
 } xXIWarpPointerReq;
-#define sz_xXIWarpPointerReq                    28
+#define sz_xXIWarpPointerReq                    36
 
 /**
- * @struct xXIChangeCursorReq
  * Change the given device's sprite to the given cursor.
  */
 
@@ -435,7 +399,6 @@ typedef struct {
 #define sz_xXIChangeCursorReq                           16
 
 /**
- * @struct xXIChangeHierarchyReq
  * Modify the device hierarchy.
  */
 
@@ -506,7 +469,6 @@ typedef struct {
 
 
 /**
- * @struct xXISetClientPointerReq
  * Set the window/client's ClientPointer.
  */
 typedef struct {
@@ -520,7 +482,6 @@ typedef struct {
 #define sz_xXISetClientPointerReq                 12
 
 /**
- * @struct xXIGetClientPointerReq
  * Query the given window/client's ClientPointer setting.
  */
 typedef struct {
@@ -548,7 +509,6 @@ typedef struct {
 #define sz_xXIGetClientPointerReply               32
 
 /**
- * @struct xXISetFocusReq
  * Set the input focus to the specified window.
  */
 typedef struct {
@@ -563,7 +523,6 @@ typedef struct {
 #define sz_xXISetFocusReq                       16
 
 /**
- * @struct xXIGetDeviceFocusReq
  * Query the current input focus.
  */
 typedef struct {
@@ -591,7 +550,6 @@ typedef struct {
 
 
 /**
- * @struct xXIGrabDeviceReq
  * Grab the given device.
  */
 typedef struct {
@@ -637,7 +595,6 @@ typedef struct {
 #define sz_xXIGrabDeviceReply                  32
 
 /**
- * @struct xXIUngrabDeviceReq
  * Ungrab the specified device.
  *
  */
@@ -653,7 +610,6 @@ typedef struct {
 
 
 /**
- * @struct xXIAllowEventsReq
  * Allow or replay events on the specified grabbed device.
  */
 typedef struct {
@@ -669,7 +625,6 @@ typedef struct {
 
 
 /**
- * @struct xXIPassiveGrabDeviceReq
  * Passively grab the device.
  */
 typedef struct {
@@ -707,7 +662,6 @@ typedef struct {
 #define sz_xXIPassiveGrabDeviceReply            32
 
 /**
- * @struct xXIPassiveUngrabDeviceReq
  * Delete a passive grab for the given device.
  */
 typedef struct {
@@ -725,7 +679,6 @@ typedef struct {
 #define sz_xXIPassiveUngrabDeviceReq            20
 
 /**
- * @struct xXIListPropertiesReq
  * List all device properties on the specified device.
  */
 typedef struct {
@@ -753,7 +706,6 @@ typedef struct {
 #define sz_xXIListPropertiesReply               32
 
 /**
- * @struct xXIChangePropertyReq
  * Change a property on the specified device.
  */
 typedef struct {
@@ -770,7 +722,6 @@ typedef struct {
 #define sz_xXIChangePropertyReq                 20
 
 /**
- * @struct xXIDeletePropertyReq
  * Delete the specified property.
  */
 typedef struct {
@@ -784,7 +735,6 @@ typedef struct {
 #define sz_xXIDeletePropertyReq                 12
 
 /**
- * @struct xXIGetPropertyReq
  * Query the specified property's values.
  */
 typedef struct {
@@ -828,7 +778,6 @@ typedef struct {
  *************************************************************************************/
 
 /**
- * @struct xXIGenericDeviceEvent
  * Generic XI2 event header. All XI2 events use the same header.
  */
 typedef struct
@@ -843,12 +792,6 @@ typedef struct
 } xXIGenericDeviceEvent;
 
 /**
- * @struct xXIHierarchyEvent
- * The device hierarchy has been modified. This event includes the device
- * hierarchy after the modification has been applied.
- */
-
-/**
  * Device hierarchy information.
  */
 typedef struct
@@ -868,6 +811,10 @@ typedef struct
                                              ::XIDeviceEnabled, ::XIDeviceDisabled */
 } xXIHierarchyInfo;
 
+/**
+ * The device hierarchy has been modified. This event includes the device
+ * hierarchy after the modification has been applied.
+ */
 typedef struct
 {
     uint8_t     type;                   /**< Always GenericEvent */
@@ -888,7 +835,6 @@ typedef struct
 } xXIHierarchyEvent;
 
 /**
- * @struct xXIDeviceChangedEvent
  * A device has changed capabilities.
  */
 typedef struct
@@ -910,10 +856,8 @@ typedef struct
 } xXIDeviceChangedEvent;
 
 /**
- * @struct xXIDeviceEvent
  * Default input event for pointer or keyboard input.
  */
-
 typedef struct
 {
     uint8_t     type;                   /**< Always GenericEvent */
@@ -943,7 +887,6 @@ typedef struct
 
 
 /**
- * @struct xXIRawEvent
  * Sent when an input event is generated. RawEvents include valuator
  * information in both device-specific data (i.e. unaccelerated) and
  * processed data (i.e. accelerated, if applicable).
@@ -958,9 +901,7 @@ typedef struct
     uint16_t    deviceid;
     Time        time;
     uint32_t    detail;
-    uint16_t    eventtype;              /**< ::XI_Motion, ::XI_ButtonPress,
-                                             ::XI_ButtonRelease, ::XI_KeyPress,
-                                             ::XI_KeyRelease */
+    uint16_t    pad0;
     uint16_t    valuators_len;          /**< Length of trailing valuator
                                              mask in 4 byte units */
     uint32_t    flags;                  /**< ::XIKeyRepeat */
@@ -968,7 +909,6 @@ typedef struct
 } xXIRawEvent;
 
 /**
- * @struct xXIEnterEvent
  * Note that the layout of root, event, child, root_x, root_y, event_x,
  * event_y must be identical to the xXIDeviceEvent.
  */
@@ -1005,7 +945,6 @@ typedef xXIEnterEvent xXIFocusInEvent;
 typedef xXIEnterEvent xXIFocusOutEvent;
 
 /**
- * @struct xXIPropertyEvent
  * Sent when a device property is created, modified or deleted. Does not
  * include property data, the client is required to query the data.
  */
diff --git a/X11/extensions/XI2proto.txt b/X11/extensions/XI2proto.txt
index 7c41debc8..706f50a03 100644
--- a/X11/extensions/XI2proto.txt
+++ b/X11/extensions/XI2proto.txt
@@ -63,7 +63,37 @@ COMPLEXFIELDTYPE:  { name of subfield:   type of subfield,
 
 3. Interoperability between version 1.x and 2.0
 
-FIXME
+There is little interaction between 1.x and 2.x versions of the X Input
+Extension. Clients are requested to avoid mixing XI1.x and XI2 code as much as
+possible. Several direct incompatibilities are observable:
+
+3.1 Limitations resulting from different variable ranges
+
+XI2 provides a larger range for some fields than XI1. As a result, XI1 clients
+may not receive data an XI2 client receives.
+These fields include:
+- devices with a deviceid of greater than 127 are invisible to XI1 clients.
+- key events and key grabs featuring larger than 255 can only be sent to XI2
+  clients.
+- no subpixel information is avialable to XI1 clients. If motion events are in
+  a subpixel range only, the server may omit these events and an XI 1.x client
+  will not receive events until the pixel boundary is crossed.
+
+
+3.2 Blocking of grabs
+
+XI1 grabs are different to XI2 grab and a device may not be grabbed through an
+XI2 grab if an XI1 grab is currently active on this device or vice versa.
+Likewise, a keycode or button already grabbed by an XI 1.x or XI2 client may
+not be grabbed with the same modifier combination by an XI2 or XI 1.x client,
+respectively.
+
+3.3 Invisibility of Master Devices
+
+XI 1.x was not designed with support for multiple master devices (see Section
+4). As a result, only the first master pointer and master keyboard are visible
+to XI 1.x clients, all other master devices are invisible and cannot be
+accessed from XI 1.x calls.
 
                               ❧❧❧❧❧❧❧❧❧❧❧
 
@@ -119,6 +149,26 @@ to P is only attempted if neither the XI event, nor the core event has been
 delivered on W. Once an event has been delivered as either XI or core event,
 event processing stops.
 
+4.4. The ClientPointer principle
+
+Many core protocol and some extension requests are ambiguous when multiple
+master devices are available (e.g. QueryPointer does not specfy which pointer).
+The X server does not have the knowledge to chose the contextually correct
+master device. For each client, one master pointer is designated as this
+clients's "ClientPointer". Whenever a client sends an ambiguous request (e.g.
+QueryPointer), the ClientPointer or the keyboard paired with the ClientPointer
+is chosen to provide the data for this request.
+
+This ClientPointer may be explicitly assigned to a client with the
+SetClientPointer call. If no ClientPointer is set when a client issues an
+ambiguous request, the server choses one device as the ClientPointer. The
+method of chosing a ClientPointer from the available master pointers is
+implementation-specific.
+
+If the master pointer currently set as ClientPointer for one or more clients is
+removed, the server may either unset the ClientPointer setting or change the
+ClientPointer to a different master pointer.
+
                               ❧❧❧❧❧❧❧❧❧❧❧
 5. Data types
 
@@ -176,7 +226,8 @@ future revisions of XI2. A client must always retrieve the exact length of the
 protocol reply from the connection, even if the reply is longer than defined
 for the XI2 version supported by the client.
 Additional bytes in a request may include data supported in later versions of
-XI2. Clients should ignore this data.
+XI2. Clients should ignore this data. Padding bytes in XI2 protocol requests
+are required to be 0.
 
 7.1 Requests introduced in version 2.0
 
@@ -193,7 +244,7 @@ XI2. Clients should ignore this data.
     server sends the highest version it supports, but no higher than the
     requested version. Major versions changes can introduce incompatibilities
     in existing functionality, minor version changes introduce only backward
-    compatible changes.  It is the clients responsibility to ensure that the
+    compatible changes.  It is the client's responsibility to ensure that the
     server supports a version which is compatible with its expectations.
 
     major_version
@@ -220,7 +271,7 @@ XI2. Clients should ignore this data.
                  name:                  LISTofCHAR8
                  classes:               LISTofCLASS }
 
-    CLASS { BUTTONCLASS KEYCLASS, AXISCLASS }
+    CLASS { BUTTONCLASS, KEYCLASS, AXISCLASS }
 
     BUTTONCLASS { type:                 ButtonClass
                   length:               CARD16
@@ -248,45 +299,43 @@ XI2. Clients should ignore this data.
     XIQueryDevices details information about the requested input devices.
 
     devices
-        The device to list. If 'devices' is AllDevices, all enabled and
-        disabled devices are listed. If 'devices' is AllMasterDevices, all
-        enabled and disabled master devices are listed. If 'devices' is a
-        valid DEVICE, only this DEVICE is listed and 'num_devices' is 1.
+        The device to list. If devices is AllDevices, all enabled and
+        disabled devices are listed. If devices is AllMasterDevices, all
+        enabled and disabled master devices are listed. If devices is a
+        valid DEVICE, only this DEVICE is listed and num_devices is 1.
     num_devices
-        The number of 'deviceinfos' returned.
+        The number of deviceinfos returned.
 
-    Each 'deviceinfo' is detailed as follows:
+    Each deviceinfo is detailed as follows:
     deviceid
         The unique ID of the device. Device IDs may get re-used when a device
         is removed.
     use
-        If the device is a master pointer, 'use' is MasterPointer.
-        If the device is a master keyboard, 'use' is MasterKeyboard.
-        If the device is a slave pointer, 'use' is SlavePointer.
-        If the device is a slave keyboard, 'use' is SlaveKeyboard.
-        If the device is a floating slave, 'use' is FloatingSlave.
-
+        If the device is a master pointer, use is MasterPointer.
+        If the device is a master keyboard, use is MasterKeyboard.
+        If the device is a slave pointer, use is SlavePointer.
+        If the device is a slave keyboard, use is SlaveKeyboard.
+        If the device is a floating slave, use is FloatingSlave.
     attachment
-        If the device is a master pointer or a master keyboard, 'attachment'
+        If the device is a master pointer or a master keyboard, attachment
         specifies the paired master keyboard, or the paired master pointer,
         respectively.  If the device is a non-floating slave device
-        'attachment' specifies the master device this device is attached to.
-        If the device is a floating slave, 'attachment' is undefined.
-
+        attachment specifies the master device this device is attached to.
+        If the device is a floating slave, attachment is undefined.
     enabled
         Zero if the device is disabled, non-zero otherwise.
     num_classes
-        Number of 'classes' provided.
+        Number of classes provided.
     name_len
-        Length of the name in bytes.
+        Length of the name in bytes not including padding.
     classes
         Details the available classes provided by the device in an undefined
         order.
     name
-        The device's name, padded to a multiple of 4 bytes.
+        The device's name. padded to a multiple of 4 bytes.
 
-    For all classes, 'type' specifies the device class. Clients are required
-    to ignore unknown device classes. The 'length' field specifies the length
+    For all classes, type specifies the device class. Clients are required
+    to ignore unknown device classes. The length field specifies the length
     of the class in 4 byte units.
     The following classes may occur only once: ButtonClass, KeyClass
 
@@ -300,14 +349,14 @@ XI2. Clients should ignore this data.
     num_buttons
         Number of buttons provided by the device.
     labels
-        List of Atoms specifying the label for each button. An atom of None
+        List of Atoms specifying the label for each button. An Atom of None
         specifies an unlabeled button. Buttons are listed in the device-native
-        order and potential button mappings are ignored.
+        order regardless of the current button mapping.
     state
-        The current button mask for this device. Each bit representing a
-        button is 1 if this button is logically down, or 0 otherwise. State a
-        multiple of 4-byte units and always contains at least num_buttons
-        bits.
+        The current button mask for this device after button mapping is
+        applied. Each bit representing a button is 1 if this button is
+        logically down, or 0 otherwise. State is a multiple of 4-byte units
+        and always contains at least num_buttons bits.
 
     KeyClass:
     type
@@ -345,8 +394,8 @@ XI2. Clients should ignore this data.
     value
         Last published axis value (if mode is absolute).
 
-    An axis in Relative mode may specify 'min' and 'max' as a hint to the
-    client. If no 'min' and 'max' information is available, both must be 0.
+    An axis in Relative mode may specify min and max as a hint to the
+    client. If no min and max information is available, both must be 0.
 
     ┌───
         XISelectEvents
@@ -363,7 +412,7 @@ XI2. Clients should ignore this data.
     window
         The window to select the events on.
     num_masks
-        Number of items in mask.
+        Number of items in masks.
     deviceid
         Numerical deviceid, or AllDevices, or AllMasterDevices.
     mask_len
@@ -371,21 +420,21 @@ XI2. Clients should ignore this data.
     mask
         Event mask. An event mask for an event type T is defined as (1 << T).
 
-    XISelectEvents selects for XI2 events on 'window'.
+    XISelectEvents selects for XI2 events on window.
 
-    If 'num_masks' is 0, a BadValue error occurs.
+    If num_masks is 0, a BadValue error occurs.
 
-    Each 'mask' sets the (and overwrites a previous) event mask for the DEVICE
-    specified through 'deviceid'. The device 'AllDevices' or
-    'AllMasterDevices' is treated as a separate device by server. A client's
-    event mask is the union of 'AllDevices', 'AllMasterDevices' and the
+    Each mask sets the (and overwrites a previous) event mask for the DEVICE
+    specified through deviceid. The device AllDevices or
+    AllMasterDevices is treated as a separate device by server. A client's
+    event mask is the union of AllDevices, AllMasterDevices and the
     per-device event mask.
     The removal of device from the server unsets the event masks for the
     device. If an event mask is set for AllDevices or AllMasterDevices, the
     event mask is not cleared on device removal and affects all future
     devices.
 
-    If 'mask_len' is 0, the event mask for the given device is cleared.
+    If mask_len is 0, the event mask for the given device is cleared.
 
     The mask for XIHierarchyEvents may only be selected for XIAllDevices.
     Setting it for any other device results in a BadValue error.
@@ -398,18 +447,19 @@ XI2. Clients should ignore this data.
             masks:          LISTofEVENTMASK
     └───
 
-
     window
         The window to select the events on.
     num_masks
-        Number of items in mask.
+        Number of items in masks.
     masks
         Selected event masks by this client.
 
-    Masks are returned on a per-device basis, with masks for 'AllDevices' and
-    'AllMasterDevices' returned separately.
+    Masks are returned on a per-device basis, with masks for AllDevices and
+    AllMasterDevices returned separately. A client can calculate the
+    effective mask for a device with a bitwise OR of the AllDevices, the
+    AllMasterDevices and the device-specific mask.
 
-    If 'num_masks' is 0, no events have been selected by this client on the
+    If num_masks is 0, no events have been selected by this client on the
     given window.
 
     ┌───
@@ -435,24 +485,27 @@ XI2. Clients should ignore this data.
     root
         The root window the pointer is logically on.
     child
-        The child window of 'window' that contains the pointer or None.
+        The child window of window that contains the pointer or None.
     root_x
     root_y
         Pointer position relative to the root window's origin.
     win_x
     win_y
-        Pointer position relative to 'window' or 0 if 'same_screen' is false.
+        Pointer position relative to window or 0 if same_screen is false.
     same_screen
-        TRUE if 'window' is on the same screen as the pointer.
+        True if window is on the same screen as the pointer.
     mods
         XKB modifier state on the paired device.
     group
         XKB group state on the paired device.
     buttons_len
-        The length of 'buttons' in 4 byte units.
+        The length of buttons in 4 byte units.
     buttons
         Button state.
 
+    If the device is not a master pointer device or not a floating slave
+    pointer, a BadDevice error results.
+
     ┌───
         XIWarpPointer
             src_win:         Window
@@ -466,7 +519,7 @@ XI2. Clients should ignore this data.
             deviceid:        DEVICEID
     └───
 
-    WarpPointer moves the pointer of 'deviceid' as if the user had moved
+    WarpPointer moves the pointer of deviceid as if the user had moved
     the pointer. WarpPointer can only be called for MasterPointer and
     FloatingSlave devices.
 
@@ -476,9 +529,9 @@ XI2. Clients should ignore this data.
        rectangle of src_window.
     dst_win
        If dst_win is None, this request moves the pointer by offsets
-       'dst_x'/'dst_y' relative to the current position of the pointer. If
+       dst_x/dst_y relative to the current position of the pointer. If
         dst_window is a window, this request moves the pointer to
-       'dst_x'/'dst_y' relative to dst_win's origin.
+       dst_x/dst_y relative to dst_win's origin.
     src_x
     src_y
     src_width
@@ -486,8 +539,8 @@ XI2. Clients should ignore this data.
        Specifies the source window rectangle.
     dst_x
     dst_y
-        The relative coordinates to move the pointer if 'dst_win' is None, or
-        the absolute coordinates if 'dst_win' is a window.
+        The relative coordinates to move the pointer if dst_win is None, or
+        the absolute coordinates if dst_win is a window.
     deviceid
         The device to warp.
 
@@ -514,14 +567,20 @@ XI2. Clients should ignore this data.
     deviceid
         The master pointer device.
 
-    Whenever 'device' enters a window W, the cursor shape is selected in the
+    Whenever device enters a window W, the cursor shape is selected in the
     following order:
-    - if the current window has a device cursor C(d) defined for 'device',
+    - if the current window has a device cursor C(d) defined for device,
       display this cursor C(d).
     - otherwise, if the current window has a cursor C(w) defined in the core
       protocol's window attributes, display cursor C(w).
     - repeat on parent window until a cursor has been found.
 
+    The device cursor for a given window is reset once the window is destroyed
+    or the device is removed, whichever comes earlier.
+
+    If deviceid does not specify a master pointer, a BadDevice error
+    is returned.
+
     ┌───
         XIChangeHierarchy
             num_changes:     CARD8
@@ -565,9 +624,10 @@ XI2. Clients should ignore this data.
     changes
         The list of changes.
 
-    The server processes the changes one by one and applies changes
-    immediately. If an error occurs, processing stops at the current change
-    and returns the number of successfully applied changes in the error.
+    The server processes the changes in the order received from the client and
+    applies each requested change immediately. If an error occurs, processing
+    stops at the current change and returns the number of successfully applied
+    changes in the error.
 
     ADDMASTER creates a pair of master devices.
     type
@@ -575,11 +635,11 @@ XI2. Clients should ignore this data.
     length
         Length in 4 byte units.
     name_len
-        Length of 'name' in bytes.
+        Length of name in bytes.
     send_core
-        TRUE if the device should send core events.
+        True if the device should send core events.
     enable
-        TRUE if the device is to be enabled immediately.
+        True if the device is to be enabled immediately.
     name
         The name for the new master devices. The master pointer's name is
         automatically appended with " pointer", the master keyboard's name is
@@ -594,14 +654,15 @@ XI2. Clients should ignore this data.
         The device to remove.
     return_mode
         Return mode for attached slave devices.
-        If 'return_mode' is Float, all slave devices are set to floating.
-        If 'return_mode' is Attach, slave pointers are attached to
-        'return_pointer' and slave keyboards are attached to
-        'return_keyboard'.
+        If return_mode is Float, all slave devices are set to floating.
+        If return_mode is Attach, slave pointers are attached to
+        return_pointer and slave keyboards are attached to
+        return_keyboard.
     return_pointer
     return_keyboard
         The master pointer and master keyboard to attach slave devices to, if
-        'return_mode' is Attach.
+        return_mode is Attach. If return_mode is Float, return_pointer
+        and return_keyboard are undefined.
 
     Removing a master pointer removes the paired master keyboard and vice
     versa.
@@ -630,7 +691,7 @@ XI2. Clients should ignore this data.
             deviceid:        DEVICEID
     └───
 
-    Set the ClientPointer for the client owning 'win' to the given device.
+    Set the ClientPointer for the client owning win to the given device.
 
     win
          Window or client ID.
@@ -640,7 +701,8 @@ XI2. Clients should ignore this data.
     Some protocol requests are ambiguous and the server has to choose a device
     to provide data for a request or a reply. By default, the server will
     choose a client's ClientPointer device to provide the data, unless the
-    client currently has a grab on another device.
+    client currently has a grab on another device. See section 4.4 for more
+    details.
 
     If win is None, the ClientPointer for this client is set to the given
     device. Otherwise, if win is a valid window, the ClientPointer for the
@@ -649,7 +711,7 @@ XI2. Clients should ignore this data.
     this client's ClientPointer is set to the given device.
 
     If deviceid does not specify a master pointer or master keyboard, a
-    BadDevice error returned.
+    BadDevice error is returned.
 
     If window does not specify a valid window or client ID and is not None, a
     BadWindow error is returned.
@@ -662,14 +724,18 @@ XI2. Clients should ignore this data.
             deviceid:        DEVICEID
     └───
 
-    Query the ClientPointer for the client owning 'win'.
+    Query the ClientPointer for the client owning win.
 
     win
         The window or client ID.
     set
-        TRUE if the client has an explicitly set ClientPointer.
+        True if the client has a ClientPointer set.
     deviceid
-        The master pointer that acts as a ClientPointer if 'set' is TRUE.
+        The master pointer that acts as a ClientPointer if set is True.
+
+    No difference is made between a ClientPointer set explicitly through
+    XISetClientPointer and a ClientPointer implicitly assigned by the server
+    in response to an ambiguous request.
 
     ┌───
         XISetFocus
@@ -753,7 +819,6 @@ XI2. Clients should ignore this data.
     status
         Success or the reason why the grab could not be established.
 
-
     The masks parameter specifies which events the client wishes to receive
     while the device is grabbed.
 
@@ -815,8 +880,8 @@ XI2. Clients should ignore this data.
     time
         A valid server time or CurrentTime.
 
-    The request has no effect if the specified time is earlier
-    than the last-device-grab time or is later than the current server time.
+    The request has no effect if the specified time is earlier than the
+    last-device-grab time or is later than the current server time.
     This request generates FocusIn and FocusOut events.
     An XIUngrabDevice is performed automatically if the event window for an
     active device grab becomes not viewable.
@@ -916,7 +981,7 @@ XI2. Clients should ignore this data.
 
     ┌───
         XIPassiveGrabDevice
-            deviceid:        DEVICEID
+            deviceid:        DEVICE
             detail:          CARD32
             grab_type:       GRABTYPE
             grab_window:     Window
@@ -946,7 +1011,8 @@ XI2. Clients should ignore this data.
             The cursor to display for the duration of the grab. If grab_type
             is not GrabtypeButton, this argument is ignored.
         deviceid
-            The device to establish the passive grab on.
+            The device to establish the passive grab on or AllDevices or
+            AllMasterDevices.
         detail
             The button number, or key symbol to grab for.
             Must be 0 for GrabtypeEnter and GrabtypeFocusIn.
@@ -1262,9 +1328,16 @@ Version 2.0:
         ButtonPress
         ButtonRelease
         Motion
-        RawEvent
+        RawKeyPress
+        RawKeyRelease
+        RawButtonPress
+        RawButtonRelease
+        RawMotion
         Enter
         Leave
+        FocusIn
+        FocusOut
+        PropertyEvent
 
 All events have a set of common fields specified as EVENTHEADER.
 
@@ -1319,25 +1392,25 @@ EVENTHEADER { type:                       BYTE
         The current hierarchy information.
 
     An XIHierarchyEvent is sent whenever the device hierarchy been
-    changed. The 'flags' specify all types of hierarchy modifiations that have
+    changed. The flags specify all types of hierarchy modifiations that have
     occured.
-    For all devices, 'info' details the hierarchy information after the
+    For all devices, info details the hierarchy information after the
     modification of the hierarchy has occured. For each device specified with
-    'deviceid':
-    - if 'type' is MasterPointer or MasterKeyboard, 'attachment' decribes the
+    deviceid:
+    - if type is MasterPointer or MasterKeyboard, attachment decribes the
       pairing of this device.
-    - if 'type' is SlavePointer or SlaveKeyboard, 'attachment' describes the
+    - if type is SlavePointer or SlaveKeyboard, attachment describes the
       master device this device is attached to.
-    - if 'type' is FloatingSlave device, 'attachment' is undefined.
+    - if type is FloatingSlave device, attachment is undefined.
 
     enabled
-         TRUE if the device is enabled and can send events. A disabled master
+         True if the device is enabled and can send events. A disabled master
          device will not forward events from an attached, enabled slave
          device.
 
     Note: Multiple devices may be affected in one hierarchy change,
-    'deviceid' in an XIHierarchyEvent is always the first affected
-    device. Clients should ignore deviceid and instead use the 'devices' list.
+    deviceid in an XIHierarchyEvent is always the first affected
+    device. Clients should ignore deviceid and instead use the devices list.
 
     ┌───
         DeviceChangedEvent:
@@ -1356,22 +1429,21 @@ EVENTHEADER { type:                       BYTE
 
     reason
         The reason for generating this event.
-        If 'reason' is SlaveSwitch, the slave device sending events through
-        this device has changed and 'source' specifies the new slave device.
-        A SlaveSwitch 'reason' can only occur on a master device.
-        If 'reason' is DeviceChange, the device itself has changed through
-        other means (e.g. a physical device change) and 'source' is
-        undefined.
+        If reason is SlaveSwitch, the slave device sending events through
+        this device has changed and source specifies the new slave device.
+        A SlaveSwitch reason can only occur on a master device.
+        If reason is DeviceChange, the device itself has changed through
+        other means (e.g. a physical device change) and source is
+        the device itself.
     source
-        The source of the new classes. Only defined in 'reason' is
-        SlaveSwitch.
+        The source of the new classes.
     num_classes
-        Number of 'classes' provided.
+        Number of classes provided.
     classes
         Details the available classes provided by the device.  The order the
         classes are provided in is undefined.
 
-    For a detailed description of 'classes', see the XQueryInputDevice
+    For a detailed description of classes, see the XQueryInputDevice
     request.
 
     ┌───
@@ -1432,9 +1504,9 @@ EVENTHEADER { type:                       BYTE
         event window (16.16 fixed point).
 
     buttons_len
-        The length of 'buttons' in 4 byte units.
+        The length of buttons in 4 byte units.
     valuators_len
-        The length of 'valuators' in 4 byte units.
+        The length of valuators in 4 byte units.
     sourceid
         The source device that originally generated the event.
     mods
@@ -1444,7 +1516,7 @@ EVENTHEADER { type:                       BYTE
     buttons
         Button state before the event.
     valuators
-        Bitmask of valuators provided in 'axisvalues'.
+        Bitmask of valuators provided in axisvalues.
     axisvalues
         Valuator data in device-native resolution.
     flags
@@ -1455,7 +1527,7 @@ EVENTHEADER { type:                       BYTE
         the physical state of the key has not changed.  This is only
         valid for KeyPress events.
 
-    Modifier state in 'mods' is detailed as follows:
+    Modifier state in mods is detailed as follows:
     base_mods
         XKB base modifier state.
     latched_mods
@@ -1463,7 +1535,7 @@ EVENTHEADER { type:                       BYTE
     locked_mods
         XKB locked modifier state.
 
-    Group state in 'group' is detailed as follows:
+    Group state in group is detailed as follows:
     base_group
         XKB base group state.
     latched_group
@@ -1496,11 +1568,11 @@ EVENTHEADER { type:                       BYTE
     detail
         The button number or keycode.
     flags
-        Flags as described in DeviceEvent::flags.
+        Flags as described in DeviceEvent.
     valuators_len
-        The length of 'valuators' in 4 byte units.
+        The length of valuators in 4 byte units.
     valuators
-        Bitmask of valuators provided in 'axisvalues' and 'axisvalues_raw'.
+        Bitmask of valuators provided in axisvalues and axisvalues_raw.
     axisvalues
         Valuator data in device-native resolution.
     axisvalues_raw
@@ -1571,7 +1643,7 @@ EVENTHEADER { type:                       BYTE
         Specifies the relation of the event window to the window the pointer
         entered or left. See the core protocol spec for details.
     same_screen
-        TRUE if the event window is on the same screen as the pointer's root
+        True if the event window is on the same screen as the pointer's root
         window.
     focus
         If the event window is the focus window or an inferior of the focus
@@ -1582,7 +1654,7 @@ EVENTHEADER { type:                       BYTE
     group
         XKB group state before the event.
     buttons_len
-        The length of 'buttons' in 4 byte units.
+        The length of buttons in 4 byte units.
     buttons
         Button state before the event.
 
diff --git a/X11/extensions/XResproto.h b/X11/extensions/XResproto.h
index 2f5563bce..9c2abd42d 100644
--- a/X11/extensions/XResproto.h
+++ b/X11/extensions/XResproto.h
@@ -1,7 +1,6 @@
 /*
    Copyright (c) 2002  XFree86 Inc
 */
-/* $XFree86: xc/include/extensions/XResproto.h,v 1.1 2002/03/04 19:31:35 mvojkovi Exp $ */
 
 #ifndef _XRESPROTO_H
 #define _XRESPROTO_H
diff --git a/X11/extensions/aclocal.m4 b/X11/extensions/aclocal.m4
index a12ebd67a..40554f1b9 100644
--- a/X11/extensions/aclocal.m4
+++ b/X11/extensions/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,6 +11,471 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+dnl xorg-macros.m4.  Generated from xorg-macros.m4.in xorgversion.m4 by configure.
+dnl
+dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
+dnl 
+dnl Permission is hereby granted, free of charge, to any person obtaining a
+dnl copy of this software and associated documentation files (the
+dnl "Software"), to deal in the Software without restriction, including
+dnl without limitation the rights to use, copy, modify, merge, publish,
+dnl distribute, and/or sell copies of the Software, and to permit persons
+dnl to whom the Software is furnished to do so, provided that the above
+dnl copyright notice(s) and this permission notice appear in all copies of
+dnl the Software and that both the above copyright notice(s) and this
+dnl permission notice appear in supporting documentation.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of a copyright holder
+dnl shall not be used in advertising or otherwise to promote the sale, use
+dnl or other dealings in this Software without prior written authorization
+dnl of the copyright holder.
+
+# XORG_MACROS_VERSION(required-version)
+# -------------------------------------
+# Minimum version: 1.1.0
+#
+# If you're using a macro added in Version 1.1 or newer, include this in
+# your configure.ac with the minimum required version, such as:
+# XORG_MACROS_VERSION(1.1)
+#
+# To ensure that this macro is defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION],
+#     [m4_fatal([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+#
+#
+# See the "minimum version" comment for each macro you use to see what 
+# version you require.
+m4_defun([XORG_MACROS_VERSION],[
+m4_define([vers_have], [1.2.2])
+m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
+m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
+m4_if(m4_cmp(maj_have, maj_needed), 0,,
+    [m4_fatal([xorg-macros major version ]maj_needed[ is required but ]vers_have[ found])])
+m4_if(m4_version_compare(vers_have, [$1]), -1,
+    [m4_fatal([xorg-macros version $1 or higher is required but ]vers_have[ found])])
+m4_undefine([vers_have])
+m4_undefine([maj_have])
+m4_undefine([maj_needed])
+]) # XORG_MACROS_VERSION
+
+# XORG_PROG_RAWCPP()
+# ------------------
+# Minimum version: 1.0.0
+#
+# Find cpp program and necessary flags for use in pre-processing text files
+# such as man pages and config files
+AC_DEFUN([XORG_PROG_RAWCPP],[
+AC_REQUIRE([AC_PROG_CPP])
+AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}], 
+   [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])
+
+# Check for flag to avoid builtin definitions - assumes unix is predefined,
+# which is not the best choice for supporting other OS'es, but covers most
+# of the ones we need for now.
+AC_MSG_CHECKING([if $RAWCPP requires -undef])
+AC_LANG_CONFTEST([Does cpp redefine unix ?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS=-undef
+		AC_MSG_RESULT([yes])
+	# under Cygwin unix is still defined even with -undef
+	elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS="-undef -ansi"
+		AC_MSG_RESULT([yes, with -ansi])
+	else
+		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+
+AC_MSG_CHECKING([if $RAWCPP requires -traditional])
+AC_LANG_CONFTEST([Does cpp preserve   "whitespace"?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+AC_SUBST(RAWCPPFLAGS)
+]) # XORG_PROG_RAWCPP
+
+# XORG_MANPAGE_SECTIONS()
+# -----------------------
+# Minimum version: 1.0.0
+#
+# Determine which sections man pages go in for the different man page types
+# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
+# Not sure if there's any better way than just hardcoding by OS name.
+# Override default settings by setting environment variables
+
+AC_DEFUN([XORG_MANPAGE_SECTIONS],[
+AC_REQUIRE([AC_CANONICAL_HOST])
+
+if test x$APP_MAN_SUFFIX = x    ; then
+    APP_MAN_SUFFIX=1
+fi
+if test x$APP_MAN_DIR = x    ; then
+    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
+fi
+
+if test x$LIB_MAN_SUFFIX = x    ; then
+    LIB_MAN_SUFFIX=3
+fi
+if test x$LIB_MAN_DIR = x    ; then
+    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
+fi
+
+if test x$FILE_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	FILE_MAN_SUFFIX=4  ;;
+	*)		FILE_MAN_SUFFIX=5  ;;
+    esac
+fi
+if test x$FILE_MAN_DIR = x    ; then
+    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
+fi
+
+if test x$MISC_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	MISC_MAN_SUFFIX=5  ;;
+	*)		MISC_MAN_SUFFIX=7  ;;
+    esac
+fi
+if test x$MISC_MAN_DIR = x    ; then
+    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
+fi
+
+if test x$DRIVER_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
+	*)		DRIVER_MAN_SUFFIX=4  ;;
+    esac
+fi
+if test x$DRIVER_MAN_DIR = x    ; then
+    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
+fi
+
+if test x$ADMIN_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	ADMIN_MAN_SUFFIX=1m ;;
+	*)		ADMIN_MAN_SUFFIX=8  ;;
+    esac
+fi
+if test x$ADMIN_MAN_DIR = x    ; then
+    ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
+fi
+
+
+AC_SUBST([APP_MAN_SUFFIX])
+AC_SUBST([LIB_MAN_SUFFIX])
+AC_SUBST([FILE_MAN_SUFFIX])
+AC_SUBST([MISC_MAN_SUFFIX])
+AC_SUBST([DRIVER_MAN_SUFFIX])
+AC_SUBST([ADMIN_MAN_SUFFIX])
+AC_SUBST([APP_MAN_DIR])
+AC_SUBST([LIB_MAN_DIR])
+AC_SUBST([FILE_MAN_DIR])
+AC_SUBST([MISC_MAN_DIR])
+AC_SUBST([DRIVER_MAN_DIR])
+AC_SUBST([ADMIN_MAN_DIR])
+]) # XORG_MANPAGE_SECTIONS
+
+# XORG_CHECK_LINUXDOC
+# -------------------
+# Minimum version: 1.0.0
+#
+# Defines the variable MAKE_TEXT if the necessary tools and
+# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
+# Whether or not the necessary tools and files are found can be checked
+# with the AM_CONDITIONAL "BUILD_LINUXDOC"
+AC_DEFUN([XORG_CHECK_LINUXDOC],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+
+if test x"$cross_compiling" = x"yes" ; then
+  HAVE_DEFS_ENT=no
+else
+  AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+fi
+
+AC_PATH_PROG(LINUXDOC, linuxdoc)
+AC_PATH_PROG(PS2PDF, ps2pdf)
+
+AC_MSG_CHECKING([Whether to build documentation])
+
+if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
+   BUILDDOC=yes
+else
+   BUILDDOC=no
+fi
+
+AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])
+
+AC_MSG_RESULT([$BUILDDOC])
+
+AC_MSG_CHECKING([Whether to build pdf documentation])
+
+if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
+   BUILDPDFDOC=yes
+else
+   BUILDPDFDOC=no
+fi
+
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
+MAKE_PDF="$PS2PDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_LINUXDOC
+
+# XORG_CHECK_DOCBOOK
+# -------------------
+# Minimum version: 1.0.0
+#
+# Checks for the ability to build output formats from SGML DocBook source.
+# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
+# indicates whether the necessary tools and files are found and, if set,
+# $(MAKE_XXX) blah.sgml will produce blah.xxx.
+AC_DEFUN([XORG_CHECK_DOCBOOK],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+BUILDTXTDOC=no
+BUILDPDFDOC=no
+BUILDPSDOC=no
+BUILDHTMLDOC=no
+
+AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+
+AC_PATH_PROG(DOCBOOKPS, docbook2ps)
+AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
+AC_PATH_PROG(DOCBOOKHTML, docbook2html)
+AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
+
+AC_MSG_CHECKING([Whether to build text documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
+   test x$BUILD_TXTDOC != xno; then
+	BUILDTXTDOC=yes
+fi
+AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
+AC_MSG_RESULT([$BUILDTXTDOC])
+
+AC_MSG_CHECKING([Whether to build PDF documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
+   test x$BUILD_PDFDOC != xno; then
+	BUILDPDFDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+AC_MSG_CHECKING([Whether to build PostScript documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
+   test x$BUILD_PSDOC != xno; then
+	BUILDPSDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
+AC_MSG_RESULT([$BUILDPSDOC])
+
+AC_MSG_CHECKING([Whether to build HTML documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
+   test x$BUILD_HTMLDOC != xno; then
+	BUILDHTMLDOC=yes
+fi
+AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
+AC_MSG_RESULT([$BUILDHTMLDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
+MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_DOCBOOK
+
+# XORG_CHECK_MALLOC_ZERO
+# ----------------------
+# Minimum version: 1.0.0
+#
+# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
+# malloc(0) returns NULL.  Packages should add one of these cflags to
+# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
+AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
+AC_ARG_ENABLE(malloc0returnsnull,
+	AC_HELP_STRING([--enable-malloc0returnsnull],
+		       [malloc(0) returns NULL (default: auto)]),
+	[MALLOC_ZERO_RETURNS_NULL=$enableval],
+	[MALLOC_ZERO_RETURNS_NULL=auto])
+
+AC_MSG_CHECKING([whether malloc(0) returns NULL])
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
+	AC_RUN_IFELSE([
+char *malloc();
+char *realloc();
+char *calloc();
+main() {
+    char *m0, *r0, *c0, *p;
+    m0 = malloc(0);
+    p = malloc(10);
+    r0 = realloc(p,0);
+    c0 = calloc(0);
+    exit(m0 == 0 || r0 == 0 || c0 == 0 ? 0 : 1);
+}],
+		[MALLOC_ZERO_RETURNS_NULL=yes],
+		[MALLOC_ZERO_RETURNS_NULL=no])
+fi
+AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])
+
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
+	MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
+	XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
+	XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
+else
+	MALLOC_ZERO_CFLAGS=""
+	XMALLOC_ZERO_CFLAGS=""
+	XTMALLOC_ZERO_CFLAGS=""
+fi
+
+AC_SUBST([MALLOC_ZERO_CFLAGS])
+AC_SUBST([XMALLOC_ZERO_CFLAGS])
+AC_SUBST([XTMALLOC_ZERO_CFLAGS])
+]) # XORG_CHECK_MALLOC_ZERO
+
+# XORG_WITH_LINT()
+# ----------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for source checkers such as lint and sparse if --with-lint
+# is specified.   (Use --with-lint=sparse for sparse.)
+# Sets $LINT to name of source checker passed with --with-lint (default: lint)
+# Sets $LINT_FLAGS to flags to pass to source checker
+# Sets LINT automake conditional if enabled (default: disabled)
+#
+AC_DEFUN([XORG_WITH_LINT],[
+
+# Allow checking code with lint, sparse, etc.
+AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
+		[Use a lint-style source code checker (default: disabled)])],
+		[use_lint=$withval], [use_lint=no])
+if test "x$use_lint" = "xyes" ; then
+	LINT="lint"
+else
+	LINT="$use_lint"
+fi
+if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
+    case $LINT in
+	lint|*/lint)
+	    case $host_os in
+		solaris*)
+			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
+			;;
+	    esac
+	    ;;
+    esac
+fi
+
+AC_SUBST(LINT)
+AC_SUBST(LINT_FLAGS)
+AM_CONDITIONAL(LINT, [test x$LINT != xno])
+
+]) # XORG_WITH_LINT
+
+# XORG_LINT_LIBRARY(LIBNAME)
+# --------------------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for building lint libraries for checking programs that call
+# functions in the library.
+# Disabled by default, enable with --enable-lint-library
+# Sets: 
+#	@LINTLIB@		- name of lint library file to make
+#	MAKE_LINT_LIB		- automake conditional
+#
+
+AC_DEFUN([XORG_LINT_LIBRARY],[
+AC_REQUIRE([XORG_WITH_LINT])
+# Build lint "library" for more indepth checks of programs calling this library
+AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
+	[Create lint library (default: disabled)])],
+	[make_lint_lib=$enableval], [make_lint_lib=no])
+if test "x$make_lint_lib" != "xno" ; then
+	if test "x$LINT" = "xno" ; then
+		AC_MSG_ERROR([Cannot make lint library without --with-lint])
+	fi
+	if test "x$make_lint_lib" = "xyes" ; then
+		LINTLIB=llib-l$1.ln
+	else
+		LINTLIB=$make_lint_lib
+	fi
+fi
+AC_SUBST(LINTLIB)
+AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
+
+]) # XORG_LINT_LIBRARY
+
+# XORG_CWARNFLAGS
+# ---------------
+# Minimum version: 1.2.0
+#
+# Defines CWARNFLAGS to enable C compiler warnings.
+#
+AC_DEFUN([XORG_CWARNFLAGS], [
+AC_REQUIRE([AC_PROG_CC])
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `$CC -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
+	;;
+    esac
+else
+    AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
+    fi
+fi
+AC_SUBST(CWARNFLAGS)
+]) # XORG_CWARNFLAGS
 dnl Copyright 2005 Red Hat, Inc
 dnl
 dnl Permission to use, copy, modify, distribute, and sell this software and its
@@ -57,14 +522,14 @@ AC_DEFUN([XORG_RELEASE_VERSION],[
 	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
 		[`echo $PACKAGE_VERSION | cut -d . -f 1`],
 		[Major version of this package])
-	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2`
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
 	if test "x$PVM" = "x"; then
 		PVM="0"
 	fi
 	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
 		[$PVM],
 		[Minor version of this package])
-	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3`
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
 	if test "x$PVP" = "x"; then
 		PVP="0"
 	fi
@@ -73,55 +538,66 @@ AC_DEFUN([XORG_RELEASE_VERSION],[
 		[Patch version of this package])
 ])
 
-#                                                        -*- Autoconf -*-
-# Copyright (C) 2002, 2003  Free Software Foundation, Inc.
-# Generated from amversion.in; do not edit by hand.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# XORG_CHANGELOG()
+# ----------------
+# Minimum version: 1.2.0
+#
+# Defines the variable CHANGELOG_CMD as the command to generate
+# ChangeLog from git.
+#
+# Arrange that distcleancheck ignores ChangeLog left over by distclean.
+#
+AC_DEFUN([XORG_CHANGELOG], [
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+AC_SUBST([CHANGELOG_CMD])
+AC_SUBST([distcleancheck_listfiles], ['find . -type f ! -name ChangeLog -print'])
+]) # XORG_CHANGELOG
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # AM_AUTOMAKE_VERSION(VERSION)
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
 
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.8.5])])
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
-# AM_AUX_DIR_EXPAND
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
 # $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
@@ -168,30 +644,19 @@ AC_PREREQ([2.50])dnl
 am_aux_dir=`cd $ac_aux_dir && pwd`
 ])
 
-# Do all the work for Automake.                            -*- Autoconf -*-
-
-# This macro actually does too much some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# Do all the work for Automake.                             -*- Autoconf -*-
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# serial 16
 
-# serial 11
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
 
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
 # AM_INIT_AUTOMAKE([OPTIONS])
@@ -205,16 +670,20 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.62])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
 AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
 fi
 
 # test whether we have cygpath
@@ -234,6 +703,9 @@ m4_ifval([$2],
  AC_SUBST([PACKAGE], [$1])dnl
  AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
  AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
  AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 
@@ -249,28 +721,46 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
 
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
@@ -281,62 +771,46 @@ AC_PROVIDE_IFELSE([AC_PROG_CXX],
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
+_am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # AM_PROG_INSTALL_SH
 # ------------------
 # Define $install_sh.
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
 AC_SUBST(install_sh)])
 
-#                                                          -*- Autoconf -*-
-# Copyright (C) 2003  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# serial 1
+# serial 2
 
 # Check whether the underlying file-system supports filenames
 # with a leading dot.  For instance MS-DOS doesn't.
@@ -351,27 +825,16 @@ fi
 rmdir .tst 2>/dev/null
 AC_SUBST([am__leading_dot])])
 
-#  -*- Autoconf -*-
-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 6
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -387,7 +850,15 @@ AC_SUBST($1)])
 # If it does, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
@@ -397,92 +868,41 @@ else
 fi
 ])
 
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
 # AM_PROG_MKDIR_P
 # ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-
-# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake.  There are at least two reasons why we must not
-# use `-m 0755':
-#   - it causes special bits like SGID to be ignored,
-#   - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out.  Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
 AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # Keeping the `.' argument allows $(mkdir_p) to be used without
-  # argument.  Indeed, we sometimes output rules like
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.
-  # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
-  # expensive solution, as it forces Make to start a sub-shell.)
-  mkdir_p='mkdir -p -- .'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
-  else
-    mkdir_p='$(install_sh) -d'
-  fi
-fi
-AC_SUBST([mkdir_p])])
-
-# Helper functions for option handling.                    -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# Helper functions for option handling.                     -*- Autoconf -*-
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# serial 2
+# serial 4
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -499,7 +919,7 @@ AC_DEFUN([_AM_SET_OPTION],
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
@@ -507,28 +927,16 @@ AC_DEFUN([_AM_SET_OPTIONS],
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
-#
-# Check to make sure that the build environment is sane.
-#
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 5
 
 # AM_SANITY_CHECK
 # ---------------
@@ -537,16 +945,29 @@ AC_DEFUN([AM_SANITY_CHECK],
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$[*]" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -571,25 +992,14 @@ Check your system clock])
 fi
 AC_MSG_RESULT(yes)])
 
-# AM_PROG_INSTALL_STRIP
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
+# AM_PROG_INSTALL_STRIP
+# ---------------------
 # One issue with vendor `install' (even GNU) is that you can't
 # specify the program used to strip binaries.  This is especially
 # annoying in cross-compiling environments, where the build's strip
@@ -607,6 +1017,121 @@ dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
 if test "$cross_compiling" != no; then
   AC_CHECK_TOOL([STRIP], [strip], :)
 fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
diff --git a/X11/extensions/bigreqsproto.h b/X11/extensions/bigreqsproto.h
new file mode 100644
index 000000000..bd0f8e568
--- /dev/null
+++ b/X11/extensions/bigreqsproto.h
@@ -0,0 +1,67 @@
+/*
+
+Copyright 1992, 1998  The Open Group
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation.
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of The Open Group shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from The Open Group.
+
+*/
+
+#ifndef _BIGREQSPROTO_H_
+#define _BIGREQSPROTO_H_
+
+#define X_BigReqEnable		0
+
+#define XBigReqNumberEvents	0
+
+#define XBigReqNumberErrors	0
+
+#define XBigReqExtensionName	"BIG-REQUESTS"
+
+typedef struct {
+    CARD8	reqType;	/* always XBigReqCode */
+    CARD8	brReqType;	/* always X_BigReqEnable */
+    CARD16	length B16;
+} xBigReqEnableReq;
+#define sz_xBigReqEnableReq 4
+
+typedef struct {
+    BYTE	type;			/* X_Reply */
+    CARD8	pad0;
+    CARD16	sequenceNumber B16;
+    CARD32	length B32;
+    CARD32	max_request_size B32;
+    CARD32	pad1 B32;
+    CARD32	pad2 B32;
+    CARD32	pad3 B32;
+    CARD32	pad4 B32;
+    CARD32	pad5 B32;
+} xBigReqEnableReply;
+#define sz_xBigReqEnableReply 32
+
+
+typedef struct {
+	CARD8 reqType;
+	CARD8 data;
+	CARD16 zero B16;
+        CARD32 length B32;
+} xBigReq;
+
+#endif /* _BIGREQSPROTO_H_ */
diff --git a/X11/extensions/bigreqstr.h b/X11/extensions/bigreqstr.h
index fc31eb8ae..df43f46de 100644
--- a/X11/extensions/bigreqstr.h
+++ b/X11/extensions/bigreqstr.h
@@ -1,69 +1,3 @@
-/* $Xorg: bigreqstr.h,v 1.4 2001/02/09 02:03:24 xorgcvs Exp $ */
-/*
-
-Copyright 1992, 1998  The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-
-*/
-/* $XFree86$ */
-
-#ifndef _BIGREQSTR_H_
-#define _BIGREQSTR_H_
-
-#define X_BigReqEnable		0
-
-#define XBigReqNumberEvents	0
-
-#define XBigReqNumberErrors	0
-
-#define XBigReqExtensionName	"BIG-REQUESTS"
-
-typedef struct {
-    CARD8	reqType;	/* always XBigReqCode */
-    CARD8	brReqType;	/* always X_BigReqEnable */
-    CARD16	length B16;
-} xBigReqEnableReq;
-#define sz_xBigReqEnableReq 4
-
-typedef struct {
-    BYTE	type;			/* X_Reply */
-    CARD8	pad0;
-    CARD16	sequenceNumber B16;
-    CARD32	length B32;
-    CARD32	max_request_size B32;
-    CARD32	pad1 B32;
-    CARD32	pad2 B32;
-    CARD32	pad3 B32;
-    CARD32	pad4 B32;
-    CARD32	pad5 B32;
-} xBigReqEnableReply;
-#define sz_xBigReqEnableReply 32
-
-
-typedef struct {
-	CARD8 reqType;
-	CARD8 data;
-	CARD16 zero B16;
-        CARD32 length B32;
-} xBigReq;
-
-#endif /* _BIGREQSTR_H_ */
+#pragma message("bigreqstr.h is obsolete and may be removed in the future.")
+#pragma message("include <X11/extensions/bigreqsproto.h> for the protocol defines.")
+#include <X11/extensions/bigreqsproto.h>
diff --git a/X11/extensions/configure b/X11/extensions/configure
index ca140185b..b8dfe2777 100644
--- a/X11/extensions/configure
+++ b/X11/extensions/configure
@@ -1,11 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for XExtProto 7.0.3.
+# Generated by GNU Autoconf 2.63 for XExtProto 7.1.1.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
@@ -17,7 +17,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -39,17 +39,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
   else
-    PATH_SEPARATOR=:
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
   fi
-  rm -f conf$$.sh
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -65,8 +93,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -89,7 +115,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -102,17 +128,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -134,7 +153,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
 	    s//\1/
 	    q
@@ -160,7 +179,7 @@ else
   as_have_required=no
 fi
 
-  if test $as_have_required = yes && 	 (eval ":
+  if test $as_have_required = yes &&	 (eval ":
 (as_func_return () {
   (exit \$1)
 }
@@ -242,7 +261,7 @@ IFS=$as_save_IFS
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -263,7 +282,7 @@ _ASEOF
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -343,10 +362,10 @@ fi
 
       if test "x$CONFIG_SHELL" != x; then
   for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+	done
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
 
@@ -415,9 +434,10 @@ fi
 
 test \$exitcode = 0") || {
   echo No shell found that supports shell functions.
-  echo Please tell autoconf@gnu.org about your system,
-  echo including any error possibly output before this
-  echo message
+  echo Please tell bug-autoconf@gnu.org about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
 }
 
 
@@ -453,7 +473,7 @@ test \$exitcode = 0") || {
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -481,7 +501,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -494,19 +513,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -531,10 +553,10 @@ else
   as_test_x='
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+	test -d "$1/.";
       else
 	case $1 in
-        -*)set "./$1";;
+	-*)set "./$1";;
 	esac;
 	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
 	???[sx]*):;;*)false;;esac;fi
@@ -574,69 +596,79 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='XExtProto'
 PACKAGE_TARNAME='xextproto'
-PACKAGE_VERSION='7.0.3'
-PACKAGE_STRING='XExtProto 7.0.3'
+PACKAGE_VERSION='7.1.1'
+PACKAGE_STRING='XExtProto 7.1.1'
 PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
 
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+distcleancheck_listfiles
+CHANGELOG_CMD
+am__untar
+am__tar
 AMTAR
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
 am__leading_dot
-LIBOBJS
-LTLIBOBJS'
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+with_release_version
+'
       ac_precious_vars='build_alias
 host_alias
 target_alias'
@@ -645,6 +677,8 @@ target_alias'
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -743,13 +777,21 @@ do
     datarootdir=$ac_optarg ;;
 
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
 
   -docdir | --docdir | --docdi | --doc | --do)
     ac_prev=docdir ;;
@@ -762,13 +804,21 @@ do
     dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -959,22 +1009,38 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -994,7 +1060,7 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; }
     ;;
@@ -1003,16 +1069,16 @@ Try \`$0 --help' for more information." >&2
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
@@ -1021,22 +1087,38 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute directory names.
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
 		libdir localedir mandir
 do
   eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
   case $ac_val in
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
    { (exit 1); exit 1; }; }
 done
 
@@ -1051,7 +1133,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -1067,10 +1149,10 @@ test "$silent" = yes && exec 6>/dev/null
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
+  { $as_echo "$as_me: error: working directory cannot be determined" >&2
    { (exit 1); exit 1; }; }
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
    { (exit 1); exit 1; }; }
 
 
@@ -1078,12 +1160,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
   # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -1110,12 +1192,12 @@ else
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
    { (exit 1); exit 1; }; }
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
    { (exit 1); exit 1; }; }
 	pwd)`
 # When building in place, set srcdir=.
@@ -1142,7 +1224,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures XExtProto 7.0.3 to adapt to many kinds of systems.
+\`configure' configures XExtProto 7.1.1 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1164,9 +1246,9 @@ Configuration:
 
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -1176,25 +1258,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/xextproto]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/xextproto]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1208,7 +1290,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of XExtProto 7.0.3:";;
+     short | recursive ) echo "Configuration of XExtProto 7.1.1:";;
    esac
   cat <<\_ACEOF
 
@@ -1226,15 +1308,17 @@ fi
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -1270,7 +1354,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
       echo &&
       $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi || ac_status=$?
     cd "$ac_pwd" || { ac_status=$?; break; }
   done
@@ -1279,11 +1363,11 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-XExtProto configure 7.0.3
-generated by GNU Autoconf 2.61
+XExtProto configure 7.1.1
+generated by GNU Autoconf 2.63
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1293,8 +1377,8 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by XExtProto $as_me 7.0.3, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+It was created by XExtProto $as_me 7.1.1, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   $ $0 $@
 
@@ -1330,7 +1414,7 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
+  $as_echo "PATH: $as_dir"
 done
 IFS=$as_save_IFS
 
@@ -1365,7 +1449,7 @@ do
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
     *\'*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
     1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -1417,11 +1501,12 @@ _ASBOX
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -1451,9 +1536,9 @@ _ASBOX
     do
       eval ac_val=\$$ac_var
       case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
       esac
-      echo "$ac_var='\''$ac_val'\''"
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
@@ -1468,9 +1553,9 @@ _ASBOX
       do
 	eval ac_val=\$$ac_var
 	case $ac_val in
-	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
 	esac
-	echo "$ac_var='\''$ac_val'\''"
+	$as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1486,8 +1571,8 @@ _ASBOX
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
   rm -f core *.core core.conftest.* &&
     rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
@@ -1529,21 +1614,24 @@ _ACEOF
 
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
+  ac_site_file1=$CONFIG_SITE
 elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
 else
-  set x "$ac_default_prefix/share/config.site" \
-	"$ac_default_prefix/etc/config.site"
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-shift
-for ac_site_file
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1553,16 +1641,16 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
       [\\/]* | ?:[\\/]* ) . "$cache_file";;
       *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
@@ -1576,29 +1664,38 @@ for ac_var in $ac_precious_vars; do
   eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1608,10 +1705,12 @@ echo "$as_me:   current value: $ac_new_val" >&2;}
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1646,7 +1745,8 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-am__api_version="1.8"
+am__api_version='1.11'
+
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
   if test -f "$ac_dir/install-sh"; then
@@ -1664,8 +1764,8 @@ for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1691,11 +1791,12 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -1724,17 +1825,29 @@ case $as_dir/ in
 	    # program-specific install script used by HP pwplus--don't use.
 	    :
 	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
     done
     ;;
 esac
+
 done
 IFS=$as_save_IFS
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
@@ -1747,8 +1860,8 @@ fi
     INSTALL=$ac_install_sh
   fi
 fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1758,21 +1871,38 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$*" != "X $srcdir/configure conftest.file" \
@@ -1782,9 +1912,9 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&2;}
    { (exit 1); exit 1; }; }
    fi
@@ -1795,73 +1925,209 @@ then
    # Ok.
    :
 else
-   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
 Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
   program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # Keeping the `.' argument allows $(mkdir_p) to be used without
-  # argument.  Indeed, we sometimes output rules like
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.
-  # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
-  # expensive solution, as it forces Make to start a sub-shell.)
-  mkdir_p='mkdir -p -- .'
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
   else
-    mkdir_p='$(install_sh) -d'
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
   fi
+else
+  STRIP="$ac_cv_prog_STRIP"
 fi
 
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if test "${ac_cv_path_mkdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+done
+IFS=$as_save_IFS
+
+fi
+
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    test -d ./--version && rmdir ./--version
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
   ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -1874,7 +2140,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -1885,22 +2151,23 @@ fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
   test -n "$AWK" && break
 done
 
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
 if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
 SHELL = /bin/sh
@@ -1917,12 +2184,12 @@ esac
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -1935,12 +2202,16 @@ else
 fi
 rmdir .tst 2>/dev/null
 
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
    { (exit 1); exit 1; }; }
+  fi
 fi
 
 # test whether we have cygpath
@@ -1955,7 +2226,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='xextproto'
- VERSION='7.0.3'
+ VERSION='7.1.1'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -1983,117 +2254,27 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
 
 AMTAR=${AMTAR-"${am_missing_run}tar"}
 
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
 
 
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
 
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
+# Require xorg-macros: XORG_CHANGELOG
+
+
+
+
+
 
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
 
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
 
 
 
@@ -2110,15 +2291,15 @@ fi
 	if test "x$RELEASE_VERSION" != "x"; then
 		PACKAGE="$PACKAGE-$RELEASE_VERSION"
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-		{ echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
-echo "$as_me: Building with package name set to $PACKAGE" >&6;}
+		{ $as_echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
+$as_echo "$as_me: Building with package name set to $PACKAGE" >&6;}
 	fi
 
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1`
 _ACEOF
 
-	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2`
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
 	if test "x$PVM" = "x"; then
 		PVM="0"
 	fi
@@ -2127,7 +2308,7 @@ cat >>confdefs.h <<_ACEOF
 #define PACKAGE_VERSION_MINOR $PVM
 _ACEOF
 
-	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3`
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
 	if test "x$PVP" = "x"; then
 		PVP="0"
 	fi
@@ -2138,6 +2319,14 @@ _ACEOF
 
 
 
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+
+distcleancheck_listfiles='find . -type f ! -name ChangeLog -print'
+
+
+
 ac_config_files="$ac_config_files Makefile xextproto.pc"
 
 cat >confcache <<\_ACEOF
@@ -2167,11 +2356,12 @@ _ACEOF
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -2204,12 +2394,12 @@ echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
     test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -2226,6 +2416,12 @@ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 # take arguments), then branch to the quote section.  Otherwise,
 # look for a macro that doesn't take arguments.
 ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
 t clear
 :clear
 s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
@@ -2255,7 +2451,7 @@ ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
   # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
   #    will be set to the directory where LIBOBJS objects are built.
   ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
@@ -2267,12 +2463,14 @@ LTLIBOBJS=$ac_ltlibobjs
 
 
 
+
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -2285,7 +2483,7 @@ ac_cs_silent=false
 SHELL=\${CONFIG_SHELL-$SHELL}
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
@@ -2295,7 +2493,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -2317,17 +2515,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
   else
-    PATH_SEPARATOR=:
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
   fi
-  rm -f conf$$.sh
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -2343,8 +2569,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -2367,7 +2591,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -2380,17 +2604,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -2412,7 +2629,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
 	    s//\1/
 	    q
@@ -2463,7 +2680,7 @@ $as_unset CDPATH
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -2491,7 +2708,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -2504,19 +2720,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -2541,10 +2760,10 @@ else
   as_test_x='
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+	test -d "$1/.";
       else
 	case $1 in
-        -*)set "./$1";;
+	-*)set "./$1";;
 	esac;
 	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
 	???[sx]*):;;*)false;;esac;fi
@@ -2566,8 +2785,8 @@ exec 6>&1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by XExtProto $as_me 7.0.3, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+This file was extended by XExtProto $as_me 7.1.1, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -2580,26 +2799,33 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q`
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 # Files that config.status was made for.
 config_files="$ac_config_files"
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [FILE]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number and configuration settings, then exit
-  -q, --quiet      do not print progress messages
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
 
 Configuration files:
 $config_files
@@ -2607,24 +2833,26 @@ $config_files
 Report bugs to <bug-autoconf@gnu.org>."
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-XExtProto config.status 7.0.3
-configured by $0, generated by GNU Autoconf 2.61,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+XExtProto config.status 7.1.1
+configured by $0, generated by GNU Autoconf 2.63,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
 ac_pwd='$ac_pwd'
 srcdir='$srcdir'
 INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
@@ -2646,21 +2874,24 @@ do
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
+    $as_echo "$ac_cs_version"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
     ac_need_defaults=false;;
   --he | --h |  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
@@ -2679,30 +2910,32 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
   export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  exec "\$@"
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 exec 5>>config.log
 {
   echo
   sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
 ## Running $as_me. ##
 _ASBOX
-  echo "$ac_log"
+  $as_echo "$ac_log"
 } >&5
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
 # Handling of arguments.
 for ac_config_target in $ac_config_targets
@@ -2711,8 +2944,8 @@ do
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "xextproto.pc") CONFIG_FILES="$CONFIG_FILES xextproto.pc" ;;
 
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
@@ -2751,123 +2984,144 @@ $debug ||
   (umask 077 && mkdir "$tmp")
 } ||
 {
-   echo "$me: cannot create a temporary directory in ." >&2
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
 if test -n "$CONFIG_FILES"; then
 
-_ACEOF
 
+ac_cr='
'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
 
 
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-AMTAR!$AMTAR$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 58; then
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
    { (exit 1); exit 1; }; }
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
 done
+rm -f conf$$subs.sh
 
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
 _ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
 _ACEOF
 
-
 # VPATH may cause trouble with some makes, so we remove $(srcdir),
 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
@@ -2883,19 +3137,21 @@ s/^[^=]*=[	 ]*$//
 }'
 fi
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_FILES"
 
 
-for ac_tag in  :F $CONFIG_FILES
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
 do
   case $ac_tag in
   :[FHLC]) ac_mode=$ac_tag; continue;;
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
    { (exit 1); exit 1; }; };;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
@@ -2924,26 +3180,38 @@ echo "$as_me: error: Invalid tag $ac_tag." >&2;}
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
    { (exit 1); exit 1; }; };;
       esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
     done
 
     # Let's still pretend it is `configure' which instantiates (i.e., don't
     # use $as_me), people would be surprised to read:
     #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
     if test x"$ac_file" != x-; then
       configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
     fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
     esac
     ;;
   esac
@@ -2953,7 +3221,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
 	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
+$as_echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -2979,7 +3247,7 @@ echo X"$ac_file" |
     as_dirs=
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
       as_dirs="'$as_qdir' $as_dirs"
@@ -2988,7 +3256,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
 	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -3009,17 +3277,17 @@ echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
   ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -3057,14 +3325,20 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
   *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # If the template does not know about datarootdir, expand it.
 # FIXME: This hack should be removed a few years after 2.60.
 ac_datarootdir_hack=; ac_datarootdir_seen=
 
-case `sed -n '/datarootdir/ {
+ac_sed_dataroot='
+/datarootdir/ {
   p
   q
 }
@@ -3073,13 +3347,14 @@ case `sed -n '/datarootdir/ {
 /@infodir@/p
 /@localedir@/p
 /@mandir@/p
-' $ac_file_inputs` in
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 *datarootdir*) ac_datarootdir_seen=yes;;
 *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
   ac_datarootdir_hack='
   s&@datadir@&$datadir&g
   s&@docdir@&$docdir&g
@@ -3093,15 +3368,16 @@ _ACEOF
 # Neutralize VPATH when `$srcdir' = `.'.
 # Shell code in configure.ac might set extrasub.
 # FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
+s|@configure_input@|$ac_sed_conf_input|;t t
 s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
 s&@srcdir@&$ac_srcdir&;t t
 s&@abs_srcdir@&$ac_abs_srcdir&;t t
 s&@top_srcdir@&$ac_top_srcdir&;t t
@@ -3110,22 +3386,30 @@ s&@builddir@&$ac_builddir&;t t
 s&@abs_builddir@&$ac_abs_builddir&;t t
 s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&2;}
 
   rm -f "$tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-  esac
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
  ;;
 
 
@@ -3140,6 +3424,11 @@ _ACEOF
 chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -3161,4 +3450,8 @@ if test "$no_create" != yes; then
   # would make configure fail if this is the last instruction.
   $ac_cs_success || { (exit 1); exit 1; }
 fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
 
diff --git a/X11/extensions/configure.ac b/X11/extensions/configure.ac
index 8f0c24227..4931d3b72 100644
--- a/X11/extensions/configure.ac
+++ b/X11/extensions/configure.ac
@@ -1,8 +1,12 @@
 AC_PREREQ([2.57])
-AC_INIT([XExtProto], [7.0.3], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg])
+AC_INIT([XExtProto], [7.1.1], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg])
 AM_INIT_AUTOMAKE([foreign dist-bzip2])
 
+# Require xorg-macros: XORG_CHANGELOG
+m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.2 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.2)
 XORG_RELEASE_VERSION
+XORG_CHANGELOG
 
 AC_OUTPUT([Makefile
            xextproto.pc])
diff --git a/X11/extensions/damageproto.h b/X11/extensions/damageproto.h
index d3bb04529..107e19271 100644
--- a/X11/extensions/damageproto.h
+++ b/X11/extensions/damageproto.h
@@ -1,6 +1,4 @@
 /*
- * $Id: damageproto.h,v 1.1 2003-10-24 06:16:46 keithp Exp $
- *
  * Copyright © 2003 Keith Packard
  * Copyright © 2007 Eric Anholt
  *
diff --git a/X11/extensions/damageproto.txt b/X11/extensions/damageproto.txt
index 54910adc5..1f254d4a3 100644
--- a/X11/extensions/damageproto.txt
+++ b/X11/extensions/damageproto.txt
@@ -191,20 +191,21 @@ DamageSubtract
 
 		damage:				DAMAGE
 		repair:				Region or None
-		parts:				Region
+		parts:				Region or None
 
 	Synchronously modifies the regions in the following manner:
 
 	    If repair is None:
 
-		1)	parts = damage
+		1)	if parts is not None, parts = damage
 		2)	damage = <empty>
 		
 	    Otherwise:
 	
-		1)	parts = damage INTERSECT repair
-		2)	damage = damage - parts
-		3)	Generate DamageNotify for remaining damage areas
+		1)	tmp = damage INTERSECT repair
+		2)	damage = damage - tmp
+		3)	if parts is not None, parts = tmp
+		4)	Generate DamageNotify for remaining damage areas
 
 DamageAdd
 
diff --git a/X11/extensions/damagewire.h b/X11/extensions/damagewire.h
index 466f0d0e3..d90a0dd7c 100644
--- a/X11/extensions/damagewire.h
+++ b/X11/extensions/damagewire.h
@@ -1,6 +1,4 @@
 /*
- * $Id: damagewire.h,v 1.1 2003-10-24 06:16:46 keithp Exp $
- *
  * Copyright © 2003 Keith Packard
  *
  * Permission to use, copy, modify, distribute, and sell this software and its
diff --git a/X11/extensions/geproto.h b/X11/extensions/geproto.h
index 54107df8f..c8860dd87 100644
--- a/X11/extensions/geproto.h
+++ b/X11/extensions/geproto.h
@@ -42,7 +42,7 @@
 
 /*********************************************************
  *
- * XGE protocol requests/replies 
+ * XGE protocol requests/replies
  *
  */
 
@@ -56,9 +56,9 @@ typedef struct {
 
 /* QueryVersion */
 typedef struct {
-    CARD8 	reqType;       /* input extension major code   */
-    CARD8 	ReqType;       /* always X_GEQueryVersion */
-    CARD16 	length B16;
+    CARD8	reqType;       /* input extension major code   */
+    CARD8	ReqType;       /* always X_GEQueryVersion */
+    CARD16	length B16;
     CARD16      majorVersion B16;
     CARD16      minorVersion B16;
 } xGEQueryVersionReq;
@@ -66,17 +66,17 @@ typedef struct {
 #define sz_xGEQueryVersionReq    8
 
 typedef struct {
-    CARD8 	repType;  	/* X_Reply 			*/
-    CARD8 	RepType;       	/* always X_GEQueryVersion */
-    CARD16 	sequenceNumber B16;
-    CARD32 	length B32;
-    CARD16 	majorVersion B16;
-    CARD16 	minorVersion B16;
-    CARD32 	pad00 B32;
-    CARD32 	pad01 B32;
-    CARD32 	pad02 B32;
-    CARD32 	pad03 B32;
-    CARD32 	pad04 B32;
+    CARD8	repType;	/* X_Reply			*/
+    CARD8	RepType;	/* always X_GEQueryVersion */
+    CARD16	sequenceNumber B16;
+    CARD32	length B32;
+    CARD16	majorVersion B16;
+    CARD16	minorVersion B16;
+    CARD32	pad00 B32;
+    CARD32	pad01 B32;
+    CARD32	pad02 B32;
+    CARD32	pad03 B32;
+    CARD32	pad04 B32;
 } xGEQueryVersionReply;
 
 #define sz_xGEQueryVersionReply    32
diff --git a/X11/extensions/install-sh b/X11/extensions/install-sh
index e4160c991..6781b987b 100644
--- a/X11/extensions/install-sh
+++ b/X11/extensions/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2004-04-01.17
+scriptversion=2009-04-28.21; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,120 +39,157 @@ scriptversion=2004-04-01.17
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=
-transform_arg=
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
 chgrpcmd=
-stripcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
 
-usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 -d DIRECTORIES...
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
 
-In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
-In the second, create the directory path DIR.
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
 
 Options:
--b=TRANSFORMBASENAME
--c         copy source (using $cpprog) instead of moving (using $mvprog).
--d         create directories instead of installing files.
--g GROUP   $chgrp installed files to GROUP.
--m MODE    $chmod installed files to MODE.
--o USER    $chown installed files to USER.
--s         strip installed files (using $stripprog).
--t=TRANSFORM
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
-while test -n "$1"; do
+while test $# -ne 0; do
   case $1 in
-    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-        shift
-        continue;;
+    -c) ;;
 
-    -c) instcmd=$cpprog
-        shift
-        continue;;
+    -C) copy_on_change=true;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    --help) echo "$usage"; exit 0;;
+    --help) echo "$usage"; exit $?;;
 
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
-        shift
-        continue;;
-
-    --version) echo "$0 $scriptversion"; exit 0;;
-
-    *)  # When -d is used, all remaining arguments are directories to create.
-	test -n "$dir_arg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
 	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
   esac
+  shift
 done
 
-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
   if test -z "$dir_arg"; then
     echo "$0: no input file specified." >&2
     exit 1
@@ -162,25 +199,48 @@ if test -z "$1"; then
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
 for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
     dst=$src
-    src=
-
-    if test -d "$dst"; then
-      instcmd=:
-      chmodcmd=
-    else
-      instcmd=$mkdirprog
-    fi
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
   else
-    # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
     if test ! -f "$src" && test ! -d "$src"; then
@@ -188,138 +248,273 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
-      dst=$dst/`basename "$src"`
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
     fi
   fi
 
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
 
-  # Make sure that the destination directory exists.
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
 
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
 
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    IFS=$oIFS
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
 
-    pathcomp=
+      eval "$initialize_posix_glob"
 
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
       shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp" || lasterr=$?
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
       fi
-      pathcomp=$pathcomp/
-    done
+    fi
   fi
 
   if test -n "$dir_arg"; then
-    $doit $instcmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
   else
-    # If we're going to rename the final executable, determine the name now.
-    if test -z "$transformarg"; then
-      dstfile=`basename "$dst"`
-    else
-      dstfile=`basename "$dst" $transformbasename \
-               | sed $transformarg`$transformbasename
-    fi
-
-    # don't allow the sed command to completely eliminate the filename.
-    test -z "$dstfile" && dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
     rmtmp=$dstdir/_rm.$$_
 
     # Trap to clean up those temp files at exit.
-    trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-    trap '(exit $?); exit' 1 2 13 15
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
 
-    # Move or copy the file name to the temp name
-    $doit $instcmd "$src" "$dsttmp" &&
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
     # If any of these fail, we abort the whole thing.  If we want to
     # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $instcmd $src $dsttmp" command.
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit; }
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
 done
 
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit
-}
-
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/X11/extensions/lbxproto.h b/X11/extensions/lbxproto.h
index d613d4232..a1ae62ba4 100644
--- a/X11/extensions/lbxproto.h
+++ b/X11/extensions/lbxproto.h
@@ -959,14 +959,7 @@ typedef struct _LbxFreeCellsEvent {
 #define DBG_BLOCK	0x00000020
 #define DBG_CLIENT	0x00000040
 #define DBG_DELTA	0x00000080
-
-extern int lbxDebug;
-
-#define DBG(n,m)    if (lbxDebug & (n)) { fprintf m; } else
-#else
-#define DBG(n,m)
 #endif
-
 /*
  * Cancel the previous redefinition of the basic types, thus restoring their
  * X.h definitions.
diff --git a/X11/extensions/missing b/X11/extensions/missing
index e7ef83a1c..28055d2ae 100644
--- a/X11/extensions/missing
+++ b/X11/extensions/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2003-09-02.23
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 
-#   Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@ scriptversion=2003-09-02.23
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -33,6 +31,8 @@ if test $# -eq 0; then
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -44,7 +44,7 @@ fi
 
 msg="missing on your system"
 
-case "$1" in
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -60,11 +60,6 @@ case "$1" in
     msg="probably too old"
   fi
   ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
 
   -h|--h|--he|--hel|--help)
     echo "\
@@ -82,6 +77,7 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -91,11 +87,16 @@ Supported PROGRAM values:
   tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
 Send bug reports to <bug-automake@gnu.org>."
+    exit $?
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
     echo "missing $scriptversion (GNU Automake)"
+    exit $?
     ;;
 
   -*)
@@ -104,12 +105,49 @@ Send bug reports to <bug-automake@gnu.org>."
     exit 1
     ;;
 
-  aclocal*)
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar*)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
     if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
        # We have it, but it failed.
        exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
     fi
+    ;;
+esac
 
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
@@ -118,12 +156,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch aclocal.m4
     ;;
 
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
+  autoconf*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
@@ -132,12 +165,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch configure
     ;;
 
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
+  autoheader*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@@ -147,7 +175,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -157,11 +185,6 @@ WARNING: \`$1' is $msg.  You should only need it if
     ;;
 
   automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
@@ -172,12 +195,7 @@ WARNING: \`$1' is $msg.  You should only need it if
 	   while read f; do touch "$f"; done
     ;;
 
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
+  autom4te*)
     echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
          You might have modified some files without having the
@@ -185,8 +203,8 @@ WARNING: \`$1' is needed, but is $msg.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -200,90 +218,78 @@ WARNING: \`$1' is needed, but is $msg.
     fi
     ;;
 
-  bison|yacc)
+  bison*|yacc*)
     echo 1>&2 "\
 WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
 
-  lex|flex)
+  lex*|flex*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
 
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
+  help2man*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
 	touch $file
     else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
-	exit 1
+	exit $?
     fi
     ;;
 
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
+  makeinfo*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -291,20 +297,29 @@ WARNING: \`$1' is $msg.  You should only need it if
          call might also be the consequence of using a buggy \`make' (AIX,
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
     touch $file
     ;;
 
-  tar)
+  tar*)
     shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
 
     # We have already tried tar in the generic part.
     # Look for gnutar/gtar before invocation to avoid ugly error
@@ -317,13 +332,13 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
@@ -356,5 +371,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/X11/extensions/recordconst.h b/X11/extensions/recordconst.h
new file mode 100644
index 000000000..4819de77e
--- /dev/null
+++ b/X11/extensions/recordconst.h
@@ -0,0 +1,54 @@
+/***************************************************************************
+ * Copyright 1995 Network Computing Devices
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and
+ * its documentation for any purpose is hereby granted without fee, provided
+ * that the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Network Computing Devices 
+ * not be used in advertising or publicity pertaining to distribution
+ * of the software without specific, written prior permission.
+ *
+ * NETWORK COMPUTING DEVICES DISCLAIMs ALL WARRANTIES WITH REGARD TO 
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 
+ * AND FITNESS, IN NO EVENT SHALL NETWORK COMPUTING DEVICES BE LIABLE 
+ * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ **************************************************************************/
+
+#ifndef _RECORDCONST_H_
+#define _RECORDCONST_H_
+
+#define RECORD_NAME			"RECORD"
+#define RECORD_MAJOR_VERSION		1
+#define RECORD_MINOR_VERSION		13
+#define RECORD_LOWEST_MAJOR_VERSION	1
+#define RECORD_LOWEST_MINOR_VERSION	12
+
+#define XRecordBadContext       0	/* Not a valid RC */
+
+#define RecordNumErrors         (XRecordBadContext + 1)
+#define RecordNumEvents		0L
+
+/*
+ * Constants for arguments of various requests
+ */
+#define	XRecordFromServerTime		0x01
+#define	XRecordFromClientTime		0x02
+#define	XRecordFromClientSequence	0x04
+
+#define XRecordCurrentClients		1
+#define XRecordFutureClients		2
+#define XRecordAllClients		3
+
+#define XRecordFromServer           	0
+#define XRecordFromClient               1
+#define XRecordClientStarted           	2
+#define XRecordClientDied               3
+#define XRecordStartOfData		4
+#define XRecordEndOfData		5
+
+
+#endif /* _RECORD_H_ */
diff --git a/X11/extensions/recordproto.h b/X11/extensions/recordproto.h
new file mode 100644
index 000000000..01bc9529f
--- /dev/null
+++ b/X11/extensions/recordproto.h
@@ -0,0 +1,306 @@
+/***************************************************************************
+ * Copyright 1995 Network Computing Devices
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and
+ * its documentation for any purpose is hereby granted without fee, provided
+ * that the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Network Computing Devices
+ * not be used in advertising or publicity pertaining to distribution
+ * of the software without specific, written prior permission.
+ *
+ * NETWORK COMPUTING DEVICES DISCLAIMs ALL WARRANTIES WITH REGARD TO
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL NETWORK COMPUTING DEVICES BE LIABLE
+ * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ **************************************************************************/
+
+#ifndef _RECORDPROTO_H_
+#define _RECORDPROTO_H_
+
+#include <X11/extensions/recordconst.h>
+
+/* only difference between 1.12 and 1.13 is byte order of device events,
+   which the library doesn't deal with. */
+
+/*********************************************************
+ *
+ * Protocol request constants
+ *
+ */
+#define X_RecordQueryVersion    0     /* First request from client */
+#define X_RecordCreateContext   1     /* Create client RC */
+#define X_RecordRegisterClients 2     /* Add to client RC */
+#define X_RecordUnregisterClients 3   /* Delete from client RC */
+#define X_RecordGetContext      4     /* Query client RC */
+#define X_RecordEnableContext   5     /* Enable interception and reporting */
+#define X_RecordDisableContext  6     /* Disable interception and reporting */
+#define X_RecordFreeContext     7     /* Free client RC */
+
+#define sz_XRecordRange		32
+#define sz_XRecordClientInfo 	12
+#define sz_XRecordState 	16
+#define sz_XRecordDatum 	32
+
+
+#define XRecordGlobaldef
+#define XRecordGlobalref extern
+
+#define RecordMaxEvent     	(128L-1L)
+#define RecordMinDeviceEvent	(2L)
+#define RecordMaxDeviceEvent	(6L)
+#define RecordMaxError          (256L-1L)
+#define RecordMaxCoreRequest    (128L-1L)
+#define RecordMaxExtRequest     (256L-1L)
+#define RecordMinExtRequest     (129L-1L)
+
+#define RECORD_RC 		CARD32
+#define RECORD_XIDBASE		CARD32
+#define RECORD_CLIENTSPEC	CARD32
+#define RECORD_ELEMENT_HEADER	CARD8
+
+typedef RECORD_CLIENTSPEC RecordClientSpec, *RecordClientSpecPtr;
+
+typedef struct
+{
+    CARD8	first;
+    CARD8	last;
+} RECORD_RANGE8;
+
+typedef struct
+{
+    CARD16	first B16;
+    CARD16	last B16;
+} RECORD_RANGE16;
+
+typedef struct
+{
+    RECORD_RANGE8	majorCode;
+    RECORD_RANGE16	minorCode;
+} RECORD_EXTRANGE;
+
+typedef struct
+{
+    RECORD_RANGE8	coreRequests;
+    RECORD_RANGE8	coreReplies;
+    RECORD_EXTRANGE	extRequests;
+    RECORD_EXTRANGE	extReplies;
+    RECORD_RANGE8	deliveredEvents;
+    RECORD_RANGE8	deviceEvents;
+    RECORD_RANGE8	errors;
+    BOOL		clientStarted;
+    BOOL		clientDied;
+} RECORDRANGE;
+#define sz_RECORDRANGE 	24
+
+/* typedef RECORDRANGE xRecordRange, *xRecordRangePtr;
+#define sz_xRecordRange 24 */
+
+/* Cannot have structures within structures going over the wire */
+typedef struct
+{
+    CARD8       	coreRequestsFirst;
+    CARD8       	coreRequestsLast;
+    CARD8       	coreRepliesFirst;
+    CARD8       	coreRepliesLast;
+    CARD8  		extRequestsMajorFirst;
+    CARD8		extRequestsMajorLast;
+    CARD16  		extRequestsMinorFirst B16;
+    CARD16  		extRequestsMinorLast B16;
+    CARD8  		extRepliesMajorFirst;
+    CARD8		extRepliesMajorLast;
+    CARD16  		extRepliesMinorFirst B16;
+    CARD16  		extRepliesMinorLast B16;
+    CARD8       	deliveredEventsFirst;
+    CARD8       	deliveredEventsLast;
+    CARD8		deviceEventsFirst;
+    CARD8		deviceEventsLast;
+    CARD8       	errorsFirst;
+    CARD8       	errorsLast;
+    BOOL                clientStarted;
+    BOOL		clientDied;
+} xRecordRange;
+#define sz_xRecordRange 24
+
+typedef struct
+{
+    RECORD_CLIENTSPEC	clientResource B32;
+    CARD32		nRanges B32;
+/* LISTofRECORDRANGE */
+} RECORD_CLIENT_INFO;
+
+typedef RECORD_CLIENT_INFO xRecordClientInfo;
+
+/*
+ * Initialize
+ */
+typedef struct {
+    CARD8       reqType;
+    CARD8       recordReqType;
+    CARD16      length B16;
+    CARD16      majorVersion B16;
+    CARD16      minorVersion B16;
+} xRecordQueryVersionReq;
+#define sz_xRecordQueryVersionReq 	8
+
+typedef struct
+{
+    CARD8   type;
+    CARD8   pad0;
+    CARD16  sequenceNumber B16;
+    CARD32  length	 B32;
+    CARD16  majorVersion B16;
+    CARD16  minorVersion B16;
+    CARD32  pad1	 B32;
+    CARD32  pad2	 B32;
+    CARD32  pad3	 B32;
+    CARD32  pad4	 B32;
+    CARD32  pad5	 B32;
+ } xRecordQueryVersionReply;
+#define sz_xRecordQueryVersionReply  	32
+
+/*
+ * Create RC
+ */
+typedef struct
+{
+    CARD8     		reqType;
+    CARD8     		recordReqType;
+    CARD16    		length B16;
+    RECORD_RC		context B32;
+    RECORD_ELEMENT_HEADER elementHeader;
+    CARD8		pad;
+    CARD16		pad0 B16;
+    CARD32		nClients B32;
+    CARD32              nRanges B32;
+/* LISTofRECORD_CLIENTSPEC */
+/* LISTofRECORDRANGE */
+} xRecordCreateContextReq;
+#define sz_xRecordCreateContextReq 	20
+
+/*
+ * Add to  RC
+ */
+typedef struct
+{
+    CARD8     		reqType;
+    CARD8     		recordReqType;
+    CARD16    		length B16;
+    RECORD_RC		context B32;
+    RECORD_ELEMENT_HEADER elementHeader;
+    CARD8		pad;
+    CARD16		pad0 B16;
+    CARD32		nClients B32;
+    CARD32              nRanges B32;
+/* LISTofRECORD_CLIENTSPEC */
+/* LISTofRECORDRANGE */
+} xRecordRegisterClientsReq;
+#define sz_xRecordRegisterClientsReq 	20
+
+/*
+ * Delete from RC
+ */
+typedef struct
+{
+    CARD8     		reqType;
+    CARD8     		recordReqType;
+    CARD16    		length B16;
+    RECORD_RC		context B32;
+    CARD32		nClients B32;
+/* LISTofRECORD_CLIENTSPEC */
+} xRecordUnregisterClientsReq;
+#define sz_xRecordUnregisterClientsReq 	12
+
+/*
+ * Query RC
+ */
+typedef struct
+{
+    CARD8     	reqType;
+    CARD8     	recordReqType;
+    CARD16    	length B16;
+    RECORD_RC	context B32;
+} xRecordGetContextReq;
+#define sz_xRecordGetContextReq 		8
+
+typedef struct
+{
+    CARD8   	type;
+    BOOL    	enabled;
+    CARD16  	sequenceNumber B16;
+    CARD32  	length	 B32;
+    RECORD_ELEMENT_HEADER  elementHeader;
+    CARD8	pad;
+    CARD16	pad0 B16;
+    CARD32  	nClients B32;
+    CARD32  	pad1 B32;
+    CARD32  	pad2 B32;
+    CARD32  	pad3 B32;
+    CARD32  	pad4 B32;
+/* LISTofCLIENT_INFO */ 		/* intercepted-clients */
+} xRecordGetContextReply;
+#define sz_xRecordGetContextReply  	32
+
+/*
+ * Enable data interception
+ */
+typedef struct
+{
+    CARD8     	reqType;
+    CARD8     	recordReqType;
+    CARD16    	length B16;
+    RECORD_RC	context B32;
+} xRecordEnableContextReq;
+#define sz_xRecordEnableContextReq 	8
+
+typedef struct
+{
+    CARD8		type;
+    CARD8		category;
+    CARD16		sequenceNumber B16;
+    CARD32		length B32;
+    RECORD_ELEMENT_HEADER  elementHeader;
+    BOOL		clientSwapped;
+    CARD16		pad1 B16;
+    RECORD_XIDBASE 	idBase B32;
+    CARD32		serverTime B32;
+    CARD32		recordedSequenceNumber B32;
+    CARD32		pad3 B32;
+    CARD32		pad4 B32;
+    /* BYTE		data; */
+} xRecordEnableContextReply;
+#define sz_xRecordEnableContextReply 	32
+
+/*
+ * Disable data interception
+ */
+typedef struct
+{
+    CARD8     	reqType;
+    CARD8     	recordReqType;
+    CARD16    	length B16;
+    RECORD_RC 	context B32;
+} xRecordDisableContextReq;
+#define sz_xRecordDisableContextReq	8
+
+/*
+ * Free RC
+ */
+typedef struct
+{
+    CARD8     	reqType;
+    CARD8     	recordReqType;
+    CARD16    	length B16;
+    RECORD_RC 	context B32;
+} xRecordFreeContextReq;
+#define sz_xRecordFreeContextReq 	8
+
+#undef RECORD_RC
+#undef RECORD_XIDBASE
+#undef RECORD_ELEMENT_HEADER
+#undef RECORD_CLIENTSPEC
+
+#endif
diff --git a/X11/extensions/recordstr.h b/X11/extensions/recordstr.h
index 246d34f1a..983af4dc8 100644
--- a/X11/extensions/recordstr.h
+++ b/X11/extensions/recordstr.h
@@ -1,322 +1,4 @@
-/*
-#ifndef lint
-$Xorg: recordstr.h,v 1.3 2000/08/18 04:05:46 coskrey Exp $
-static char sccsid[ ] = "@(#) recordstr.h 1.5 6/5/95 12:37:44";
-#endif
-*/
-
-/***************************************************************************
- * Copyright 1995 Network Computing Devices
- *
- * Permission to use, copy, modify, distribute, and sell this software and
- * its documentation for any purpose is hereby granted without fee, provided
- * that the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the name of Network Computing Devices
- * not be used in advertising or publicity pertaining to distribution
- * of the software without specific, written prior permission.
- *
- * NETWORK COMPUTING DEVICES DISCLAIMs ALL WARRANTIES WITH REGARD TO
- * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS, IN NO EVENT SHALL NETWORK COMPUTING DEVICES BE LIABLE
- * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
- * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- **************************************************************************/
-/* $XFree86$ */
-
-#ifndef _RECORDSTR_H_
-#define _RECORDSTR_H_
-
-#include <X11/extensions/record.h>
-
-#define RECORD_NAME			"RECORD"
-#define RECORD_MAJOR_VERSION		1
-#define RECORD_MINOR_VERSION		13
-#define RECORD_LOWEST_MAJOR_VERSION	1
-#define RECORD_LOWEST_MINOR_VERSION	12
-/* only difference between 1.12 and 1.13 is byte order of device events,
-   which the library doesn't deal with. */
-
-/*********************************************************
- *
- * Protocol request constants
- *
- */
-#define X_RecordQueryVersion    0     /* First request from client */
-#define X_RecordCreateContext   1     /* Create client RC */
-#define X_RecordRegisterClients 2     /* Add to client RC */
-#define X_RecordUnregisterClients 3   /* Delete from client RC */
-#define X_RecordGetContext      4     /* Query client RC */
-#define X_RecordEnableContext   5     /* Enable interception and reporting */
-#define X_RecordDisableContext  6     /* Disable interception and reporting */
-#define X_RecordFreeContext     7     /* Free client RC */
-
-#define RecordNumErrors         (XRecordBadContext + 1) 
-#define RecordNumEvents      	0L
-
-#define sz_XRecordRange		32
-#define sz_XRecordClientInfo 	12
-#define sz_XRecordState 	16
-#define sz_XRecordDatum 	32
-
-
-#define XRecordGlobaldef
-#define XRecordGlobalref extern
-
-#define RecordMaxEvent     	(128L-1L)
-#define RecordMinDeviceEvent	(2L)
-#define RecordMaxDeviceEvent	(6L)
-#define RecordMaxError          (256L-1L)
-#define RecordMaxCoreRequest    (128L-1L)
-#define RecordMaxExtRequest     (256L-1L)
-#define RecordMinExtRequest     (129L-1L)
-
-#define RECORD_RC 		CARD32
-#define RECORD_XIDBASE		CARD32
-#define RECORD_CLIENTSPEC	CARD32
-#define RECORD_ELEMENT_HEADER	CARD8
-
-typedef RECORD_CLIENTSPEC RecordClientSpec, *RecordClientSpecPtr;
-
-typedef struct
-{
-    CARD8	first;
-    CARD8	last;
-} RECORD_RANGE8;
-
-typedef struct
-{
-    CARD16	first B16;
-    CARD16	last B16;
-} RECORD_RANGE16;
-
-typedef struct
-{
-    RECORD_RANGE8	majorCode;
-    RECORD_RANGE16	minorCode;
-} RECORD_EXTRANGE;
-
-typedef struct
-{
-    RECORD_RANGE8	coreRequests;
-    RECORD_RANGE8	coreReplies;
-    RECORD_EXTRANGE	extRequests;
-    RECORD_EXTRANGE	extReplies;
-    RECORD_RANGE8	deliveredEvents;
-    RECORD_RANGE8	deviceEvents;
-    RECORD_RANGE8	errors;
-    BOOL		clientStarted;
-    BOOL		clientDied;
-} RECORDRANGE;
-#define sz_RECORDRANGE 	24
-
-/* typedef RECORDRANGE xRecordRange, *xRecordRangePtr;
-#define sz_xRecordRange 24 */
-
-/* Cannot have structures within structures going over the wire */
-typedef struct
-{
-    CARD8       	coreRequestsFirst;
-    CARD8       	coreRequestsLast;
-    CARD8       	coreRepliesFirst;
-    CARD8       	coreRepliesLast;
-    CARD8  		extRequestsMajorFirst;
-    CARD8		extRequestsMajorLast;
-    CARD16  		extRequestsMinorFirst B16;
-    CARD16  		extRequestsMinorLast B16;
-    CARD8  		extRepliesMajorFirst;
-    CARD8		extRepliesMajorLast;
-    CARD16  		extRepliesMinorFirst B16;
-    CARD16  		extRepliesMinorLast B16;
-    CARD8       	deliveredEventsFirst;
-    CARD8       	deliveredEventsLast;
-    CARD8		deviceEventsFirst;
-    CARD8		deviceEventsLast;
-    CARD8       	errorsFirst;
-    CARD8       	errorsLast;
-    BOOL                clientStarted;
-    BOOL		clientDied;
-} xRecordRange;
-#define sz_xRecordRange 24
-
-typedef struct
-{
-    RECORD_CLIENTSPEC	clientResource B32;
-    CARD32		nRanges B32;
-/* LISTofRECORDRANGE */
-} RECORD_CLIENT_INFO;
-
-typedef RECORD_CLIENT_INFO xRecordClientInfo;
-
-/*
- * Initialize
- */
-typedef struct {
-    CARD8       reqType;
-    CARD8       recordReqType;
-    CARD16      length B16;
-    CARD16      majorVersion B16;
-    CARD16      minorVersion B16;
-} xRecordQueryVersionReq;
-#define sz_xRecordQueryVersionReq 	8
-
-typedef struct
-{
-    CARD8   type;
-    CARD8   pad0;
-    CARD16  sequenceNumber B16;
-    CARD32  length	 B32;
-    CARD16  majorVersion B16;
-    CARD16  minorVersion B16;
-    CARD32  pad1	 B32;
-    CARD32  pad2	 B32;
-    CARD32  pad3	 B32;
-    CARD32  pad4	 B32;
-    CARD32  pad5	 B32;
- } xRecordQueryVersionReply;
-#define sz_xRecordQueryVersionReply  	32
-
-/*
- * Create RC
- */
-typedef struct
-{
-    CARD8     		reqType;
-    CARD8     		recordReqType;
-    CARD16    		length B16;
-    RECORD_RC		context B32;
-    RECORD_ELEMENT_HEADER elementHeader;
-    CARD8		pad;
-    CARD16		pad0 B16;
-    CARD32		nClients B32;
-    CARD32              nRanges B32;
-/* LISTofRECORD_CLIENTSPEC */
-/* LISTofRECORDRANGE */
-} xRecordCreateContextReq;
-#define sz_xRecordCreateContextReq 	20
-
-/*
- * Add to  RC
- */
-typedef struct
-{
-    CARD8     		reqType;
-    CARD8     		recordReqType;
-    CARD16    		length B16;
-    RECORD_RC		context B32;
-    RECORD_ELEMENT_HEADER elementHeader;
-    CARD8		pad;
-    CARD16		pad0 B16;
-    CARD32		nClients B32;
-    CARD32              nRanges B32;
-/* LISTofRECORD_CLIENTSPEC */
-/* LISTofRECORDRANGE */
-} xRecordRegisterClientsReq;
-#define sz_xRecordRegisterClientsReq 	20
-
-/*
- * Delete from RC
- */
-typedef struct
-{
-    CARD8     		reqType;
-    CARD8     		recordReqType;
-    CARD16    		length B16;
-    RECORD_RC		context B32;
-    CARD32		nClients B32;
-/* LISTofRECORD_CLIENTSPEC */
-} xRecordUnregisterClientsReq;
-#define sz_xRecordUnregisterClientsReq 	12
-
-/*
- * Query RC
- */
-typedef struct
-{
-    CARD8     	reqType;
-    CARD8     	recordReqType;
-    CARD16    	length B16;
-    RECORD_RC	context B32;
-} xRecordGetContextReq;
-#define sz_xRecordGetContextReq 		8
-
-typedef struct
-{
-    CARD8   	type;
-    BOOL    	enabled;
-    CARD16  	sequenceNumber B16;
-    CARD32  	length	 B32;
-    RECORD_ELEMENT_HEADER  elementHeader;
-    CARD8	pad;
-    CARD16	pad0 B16;
-    CARD32  	nClients B32;
-    CARD32  	pad1 B32;
-    CARD32  	pad2 B32;
-    CARD32  	pad3 B32;
-    CARD32  	pad4 B32;
-/* LISTofCLIENT_INFO */ 		/* intercepted-clients */
-} xRecordGetContextReply;
-#define sz_xRecordGetContextReply  	32
-
-/*
- * Enable data interception
- */
-typedef struct
-{
-    CARD8     	reqType;
-    CARD8     	recordReqType;
-    CARD16    	length B16;
-    RECORD_RC	context B32;
-} xRecordEnableContextReq;
-#define sz_xRecordEnableContextReq 	8
-
-typedef struct
-{
-    CARD8		type;
-    CARD8		category;
-    CARD16		sequenceNumber B16;
-    CARD32		length B32;
-    RECORD_ELEMENT_HEADER  elementHeader;
-    BOOL		clientSwapped;
-    CARD16		pad1 B16;
-    RECORD_XIDBASE 	idBase B32;
-    CARD32		serverTime B32;
-    CARD32		recordedSequenceNumber B32;
-    CARD32		pad3 B32;
-    CARD32		pad4 B32;
-    /* BYTE		data; */
-} xRecordEnableContextReply;
-#define sz_xRecordEnableContextReply 	32
-
-/*
- * Disable data interception
- */
-typedef struct
-{
-    CARD8     	reqType;
-    CARD8     	recordReqType;
-    CARD16    	length B16;
-    RECORD_RC 	context B32;
-} xRecordDisableContextReq;
-#define sz_xRecordDisableContextReq	8
-
-/*
- * Free RC
- */
-typedef struct
-{
-    CARD8     	reqType;
-    CARD8     	recordReqType;
-    CARD16    	length B16;
-    RECORD_RC 	context B32;
-} xRecordFreeContextReq;
-#define sz_xRecordFreeContextReq 	8
-
-#undef RECORD_RC
-#undef RECORD_XIDBASE
-#undef RECORD_ELEMENT_HEADER
-#undef RECORD_CLIENTSPEC
-
-#endif
+#pragma message( "recordstr.h is obsolete and may be removed in the future.")
+#pragma message("include <X11/extensions/record.h> for the library interfaces.")
+#pragma message( "include <X11/extensions/recordproto.h> for the protocol defines.")
+#include <X11/extensions/recordproto.h>
diff --git a/X11/extensions/saver.h b/X11/extensions/saver.h
index d253e4f79..e8da62560 100644
--- a/X11/extensions/saver.h
+++ b/X11/extensions/saver.h
@@ -1,6 +1,4 @@
 /*
- * $XConsortium: saver.h,v 1.5 94/04/17 20:59:33 rws Exp $
- *
 Copyright (c) 1992  X Consortium
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
diff --git a/X11/extensions/saverproto.h b/X11/extensions/saverproto.h
index 9b8ed7333..7197084cc 100644
--- a/X11/extensions/saverproto.h
+++ b/X11/extensions/saverproto.h
@@ -1,6 +1,4 @@
 /*
- * $XConsortium: saverproto.h,v 1.5 94/04/17 20:59:33 keith Exp $
- *
 Copyright (c) 1992  X Consortium
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
@@ -26,7 +24,6 @@ in this Software without prior written authorization from the X Consortium.
  *
  * Author:  Keith Packard, MIT X Consortium
  */
-/* $XFree86$ */
 
 #ifndef _SAVERPROTO_H_
 #define _SAVERPROTO_H_
diff --git a/X11/extensions/syncconst.h b/X11/extensions/syncconst.h
index 2ad5db7b9..926b60cb7 100644
--- a/X11/extensions/syncconst.h
+++ b/X11/extensions/syncconst.h
@@ -113,7 +113,7 @@ PERFORMANCE OF THIS SOFTWARE.
 	Bool signb = XSyncValueIsNegative(b);\
 	((presult)->lo = (a).lo - (b).lo);\
 	((presult)->hi = (a).hi - (b).hi);\
-	if (t>(presult)->lo) (presult)->hi--;\
+	if (t<(presult)->lo) (presult)->hi--;\
 	*poverflow = ((signa == signb) && !(signa == XSyncValueIsNegative(*presult)));\
      }
 #define _XSyncMaxValue(pv) ((pv)->hi = 0x7fffffff, (pv)->lo = 0xffffffff)
diff --git a/X11/extensions/xcmiscproto.h b/X11/extensions/xcmiscproto.h
new file mode 100644
index 000000000..482c2dc42
--- /dev/null
+++ b/X11/extensions/xcmiscproto.h
@@ -0,0 +1,110 @@
+/*
+
+Copyright 1993, 1994, 1998  The Open Group
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation.
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of The Open Group shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from The Open Group.
+
+*/
+
+#ifndef _XCMISCPROTO_H_
+#define _XCMISCPROTO_H_
+
+#define X_XCMiscGetVersion	0
+#define X_XCMiscGetXIDRange	1
+#define X_XCMiscGetXIDList	2
+
+#define XCMiscNumberEvents	0
+
+#define XCMiscNumberErrors	0
+
+#define XCMiscMajorVersion	1
+#define XCMiscMinorVersion	1
+
+#define XCMiscExtensionName	"XC-MISC"
+
+typedef struct {
+    CARD8	reqType;	/* always XCMiscCode */
+    CARD8	miscReqType;	/* always X_XCMiscGetVersion */
+    CARD16	length B16;
+    CARD16	majorVersion B16;
+    CARD16	minorVersion B16;
+} xXCMiscGetVersionReq;
+#define sz_xXCMiscGetVersionReq 8
+
+typedef struct {
+    BYTE	type;			/* X_Reply */
+    CARD8	pad0;
+    CARD16	sequenceNumber B16;
+    CARD32	length B32;
+    CARD16	majorVersion B16;
+    CARD16	minorVersion B16;
+    CARD32	pad1 B32;
+    CARD32	pad2 B32;
+    CARD32	pad3 B32;
+    CARD32	pad4 B32;
+    CARD32	pad5 B32;
+} xXCMiscGetVersionReply;
+#define sz_xXCMiscGetVersionReply 32
+
+typedef struct {
+    CARD8	reqType;	/* always XCMiscCode */
+    CARD8	miscReqType;	/* always X_XCMiscGetXIDRange */
+    CARD16	length B16;
+} xXCMiscGetXIDRangeReq;
+#define sz_xXCMiscGetXIDRangeReq 4
+
+typedef struct {
+    BYTE	type;			/* X_Reply */
+    CARD8	pad0;
+    CARD16	sequenceNumber B16;
+    CARD32	length B32;
+    CARD32	start_id B32;
+    CARD32	count B32;
+    CARD32	pad1 B32;
+    CARD32	pad2 B32;
+    CARD32	pad3 B32;
+    CARD32	pad4 B32;
+} xXCMiscGetXIDRangeReply;
+#define sz_xXCMiscGetXIDRangeReply 32
+
+typedef struct {
+    CARD8	reqType;	/* always XCMiscCode */
+    CARD8	miscReqType;	/* always X_XCMiscGetXIDList */
+    CARD16	length B16;
+    CARD32	count B32;	/* number of IDs requested */
+} xXCMiscGetXIDListReq;
+#define sz_xXCMiscGetXIDListReq 8
+
+typedef struct {
+    BYTE	type;			/* X_Reply */
+    CARD8	pad0;
+    CARD16	sequenceNumber B16;
+    CARD32	length B32;
+    CARD32	count B32;	/* number of IDs requested */
+    CARD32	pad1 B32;
+    CARD32	pad2 B32;
+    CARD32	pad3 B32;
+    CARD32	pad4 B32;
+    CARD32	pad5 B32;
+} xXCMiscGetXIDListReply;
+#define sz_xXCMiscGetXIDListReply 32
+
+#endif /* _XCMISCPROTO_H_ */
diff --git a/X11/extensions/xcmiscstr.h b/X11/extensions/xcmiscstr.h
index 2aa45e617..43ab9ff8b 100644
--- a/X11/extensions/xcmiscstr.h
+++ b/X11/extensions/xcmiscstr.h
@@ -1,112 +1,3 @@
-/* $Xorg: xcmiscstr.h,v 1.4 2001/02/09 02:03:24 xorgcvs Exp $ */
-/*
-
-Copyright 1993, 1994, 1998  The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-
-*/
-/* $XFree86$ */
-
-#ifndef _XCMISCSTR_H_
-#define _XCMISCSTR_H_
-
-#define X_XCMiscGetVersion	0
-#define X_XCMiscGetXIDRange	1
-#define X_XCMiscGetXIDList	2
-
-#define XCMiscNumberEvents	0
-
-#define XCMiscNumberErrors	0
-
-#define XCMiscMajorVersion	1
-#define XCMiscMinorVersion	1
-
-#define XCMiscExtensionName	"XC-MISC"
-
-typedef struct {
-    CARD8	reqType;	/* always XCMiscCode */
-    CARD8	miscReqType;	/* always X_XCMiscGetVersion */
-    CARD16	length B16;
-    CARD16	majorVersion B16;
-    CARD16	minorVersion B16;
-} xXCMiscGetVersionReq;
-#define sz_xXCMiscGetVersionReq 8
-
-typedef struct {
-    BYTE	type;			/* X_Reply */
-    CARD8	pad0;
-    CARD16	sequenceNumber B16;
-    CARD32	length B32;
-    CARD16	majorVersion B16;
-    CARD16	minorVersion B16;
-    CARD32	pad1 B32;
-    CARD32	pad2 B32;
-    CARD32	pad3 B32;
-    CARD32	pad4 B32;
-    CARD32	pad5 B32;
-} xXCMiscGetVersionReply;
-#define sz_xXCMiscGetVersionReply 32
-
-typedef struct {
-    CARD8	reqType;	/* always XCMiscCode */
-    CARD8	miscReqType;	/* always X_XCMiscGetXIDRange */
-    CARD16	length B16;
-} xXCMiscGetXIDRangeReq;
-#define sz_xXCMiscGetXIDRangeReq 4
-
-typedef struct {
-    BYTE	type;			/* X_Reply */
-    CARD8	pad0;
-    CARD16	sequenceNumber B16;
-    CARD32	length B32;
-    CARD32	start_id B32;
-    CARD32	count B32;
-    CARD32	pad1 B32;
-    CARD32	pad2 B32;
-    CARD32	pad3 B32;
-    CARD32	pad4 B32;
-} xXCMiscGetXIDRangeReply;
-#define sz_xXCMiscGetXIDRangeReply 32
-
-typedef struct {
-    CARD8	reqType;	/* always XCMiscCode */
-    CARD8	miscReqType;	/* always X_XCMiscGetXIDList */
-    CARD16	length B16;
-    CARD32	count B32;	/* number of IDs requested */
-} xXCMiscGetXIDListReq;
-#define sz_xXCMiscGetXIDListReq 8
-
-typedef struct {
-    BYTE	type;			/* X_Reply */
-    CARD8	pad0;
-    CARD16	sequenceNumber B16;
-    CARD32	length B32;
-    CARD32	count B32;	/* number of IDs requested */
-    CARD32	pad1 B32;
-    CARD32	pad2 B32;
-    CARD32	pad3 B32;
-    CARD32	pad4 B32;
-    CARD32	pad5 B32;
-} xXCMiscGetXIDListReply;
-#define sz_xXCMiscGetXIDListReply 32
-
-#endif /* _XCMISCSTR_H_ */
+#pragma message( "xcmiscstr.h is obsolete and may be removed in the future."  )
+#pragma message( "include <X11/extensions/xcmiscproto.h> for the protocol defines." )
+#include <X11/extensions/xcmiscproto.h>
diff --git a/X11/fonts/ChangeLog b/X11/fonts/ChangeLog
index c722b519a..8002668f0 100644
--- a/X11/fonts/ChangeLog
+++ b/X11/fonts/ChangeLog
@@ -1,4 +1,167 @@
-2005-12-14  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+commit 8ce8e2e50381e8cc7f21af58e6481175d1689ea6
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Aug 27 16:21:09 2009 +1000
 
-	* configure.ac:
-	Update package version number for final X11R7 release candidate.
+    fontsproto 2.1.0
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit c2c7f7c5b7bc45a2ff99fe252892b803c3d222fd
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Aug 27 16:16:36 2009 +1000
+
+    Remove RCS tags
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 72c22dd717afe4c7e796eae634e8c4ec175af677
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date:   Tue Jan 27 20:06:28 2009 -0200
+
+    Janitor: Correct make distcheck and dont distribute autogen.sh
+
+commit 451d42b3e5a32b91e874a32d0874485899e3b350
+Author: James Cloos <cloos@jhcloos.com>
+Date:   Thu Dec 6 16:39:01 2007 -0500
+
+    Replace static ChangeLog with dist-hook to generate from git log
+
+commit 863651c2af7b32bba7eedf5d43fdbd97998bd580
+Author: James Cloos <cloos@jhcloos.com>
+Date:   Mon Sep 3 05:54:04 2007 -0400
+
+    Add *~ to .gitignore to skip patch/emacs droppings
+
+commit 8d5cafd32d08753050738314a291dd2fd3ad91c2
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Fri Jul 14 18:56:15 2006 -0700
+
+    renamed: .cvsignore -> .gitignore
+
+commit 6ddcf067a4b10a306f13b2732c712c0a95fe26ea
+Author: Kevin E Martin <kem@kem.org>
+Date:   Thu Dec 15 00:24:37 2005 +0000
+
+    Update package version number for final X11R7 release candidate.
+
+commit bb2fe46e444a270e506904856e4f989deb67c1bc
+Author: Kevin E Martin <kem@kem.org>
+Date:   Wed Oct 19 02:48:14 2005 +0000
+
+    Update package version number for RC1 release.
+
+commit 9956a3dd5c2931a790c6e7150ddfbd0d620fdf1f
+Author: Eric Anholt <anholt@freebsd.org>
+Date:   Tue Aug 2 19:19:38 2005 +0000
+
+    Add basic .cvsignore files for proto modules.
+
+commit d63eb21475e0c75a6bf3bb1eeef12b395ccab7b0
+Author: Kevin E Martin <kem@kem.org>
+Date:   Fri Jul 29 21:22:55 2005 +0000
+
+    Various changes preparing packages for RC0:
+    - Verify and update package version numbers as needed
+    - Implement versioning scheme
+    - Change bug address to point to bugzilla bug entry form
+    - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to
+        reenable it)
+    - Fix makedepend to use pkgconfig and pass distcheck
+    - Update build script to build macros first
+    - Update modular Xorg version
+
+commit 4a938cdb4e61bb249c36a36ed480033282dba0c4
+Author: Daniel Stone <daniel@fooishbar.org>
+Date:   Sat May 21 03:52:47 2005 +0000
+
+    Change version to 2.0.
+
+commit 82b845b9a129ec244e42a5718867bdb3f4c5e62d
+Author: Adam Jackson <ajax@nwnk.net>
+Date:   Thu May 19 00:22:39 2005 +0000
+
+    revert last change, didn't do right thing at all, sorry for the noise
+
+commit 46342b904dfb936a8859c1d9a268f0d8c8af123a
+Author: Adam Jackson <ajax@nwnk.net>
+Date:   Thu May 19 00:10:18 2005 +0000
+
+    Require automake 1.7 in AM_INIT_AUTOMAKE
+
+commit e25b847cf67fd41ad36c4cb7b900bf0ed5ce8fb9
+Author: Josh Triplett <josh@speakeasy.net>
+Date:   Sat May 14 09:35:25 2005 +0000
+
+    The headers should go in include/X11/fonts, not include/X11/extensions.
+
+commit 747b5f710fd29f8e34d7d5eefbbca3a728fa8346
+Author: Josh Triplett <josh@speakeasy.net>
+Date:   Sat May 14 08:58:05 2005 +0000
+
+    Add COPYING file for Fonts.
+
+commit f875959fca0981f17522c6325e072391582090de
+Author: Søren Sandmann Pedersen <sandmann@daimi.au.dk>
+Date:   Mon May 9 18:20:04 2005 +0000
+
+    Change all the protonames from <extension>Ext to <extension>Proto.
+
+commit 79c89e7f8bd4a291cc58bc18727503ab853764db
+Author: Kevin E Martin <kem@kem.org>
+Date:   Fri May 6 01:46:30 2005 +0000
+
+    Initial build system files for proto module.
+
+commit f8419f84622bf0b65e1ed62c1828d041613a3e01
+Author: Egbert Eich <eich@suse.de>
+Date:   Fri Apr 23 18:43:08 2004 +0000
+
+    Merging XORG-CURRENT into trunk
+
+commit 89c4f5b099d21bab972166ea898d8f333d98dad5
+Author: Egbert Eich <eich@suse.de>
+Date:   Sun Mar 14 08:31:37 2004 +0000
+
+    Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004
+
+commit ae0ac1684eca92422687ae874e058f17239f503e
+Author: Egbert Eich <eich@suse.de>
+Date:   Wed Mar 3 12:10:54 2004 +0000
+
+    Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004
+
+commit 08666a657f4c63581c582807760d53dbd44d068f
+Author: Egbert Eich <eich@suse.de>
+Date:   Thu Feb 26 13:35:14 2004 +0000
+
+    readding XFree86's cvs IDs
+
+commit bd9361f063b45969747cc3458c4028aeb63a17d1
+Author: Egbert Eich <eich@suse.de>
+Date:   Thu Feb 26 09:22:28 2004 +0000
+
+    Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004
+
+commit ba8889a4f7dff3d3f4ca15e7cde42baa792cecea
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date:   Tue Nov 25 19:28:02 2003 +0000
+
+    XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks
+
+commit 5be5f868949cb6cd23acf73db79193c9adca9681
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date:   Fri Nov 14 16:48:44 2003 +0000
+
+    XFree86 4.3.0.1
+
+commit d551e3eaf4060cb24ed68eee06323337f12a95ad
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date:   Fri Nov 14 16:48:44 2003 +0000
+
+    Initial revision
+
+commit 387de4c2e956ae535a37da724803bc4acdd9ae3c
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date:   Fri Nov 14 15:54:35 2003 +0000
+
+    R6.6 is the Xorg base-line
diff --git a/X11/fonts/FS.h b/X11/fonts/FS.h
index e90752233..605b5a831 100644
--- a/X11/fonts/FS.h
+++ b/X11/fonts/FS.h
@@ -1,5 +1,3 @@
-/* $Xorg: FS.h,v 1.4 2001/02/09 02:03:24 xorgcvs Exp $ */
-
 /*
  * Copyright 1990, 1991 Network Computing Devices;
  * Portions Copyright 1987 by Digital Equipment Corporation 
@@ -50,7 +48,6 @@ used in advertising or otherwise to promote the sale, use or other dealings
 in this Software without prior written authorization from The Open Group.
 
 */
-/* $XFree86: xc/include/fonts/FS.h,v 1.9 2003/07/09 15:27:28 tsi Exp $ */
 
 #ifndef _FS_H_
 #define	_FS_H_
diff --git a/X11/fonts/FSproto.h b/X11/fonts/FSproto.h
index 03b28089f..028156fba 100644
--- a/X11/fonts/FSproto.h
+++ b/X11/fonts/FSproto.h
@@ -1,4 +1,3 @@
-/* $Xorg: FSproto.h,v 1.4 2001/02/09 02:03:25 xorgcvs Exp $ */
 /*
  
 Copyright 1990, 1991, 1998  The Open Group
@@ -43,7 +42,6 @@ in this Software without prior written authorization from The Open Group.
  * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
  * THIS SOFTWARE.
  */
-/* $XFree86: xc/include/fonts/FSproto.h,v 1.2 2001/08/01 00:44:37 tsi Exp $ */
 
 #ifndef _FS_PROTO_H_
 #define _FS_PROTO_H_
diff --git a/X11/fonts/Makefile.am b/X11/fonts/Makefile.am
index c207a03b3..99cf37c40 100644
--- a/X11/fonts/Makefile.am
+++ b/X11/fonts/Makefile.am
@@ -10,4 +10,14 @@ fonts_HEADERS = \
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = fontsproto.pc
 
-EXTRA_DIST = autogen.sh fontsproto.pc.in
+EXTRA_DIST = fontsproto.pc.in
+
+EXTRA_DIST += ChangeLog
+MAINTAINERCLEANFILES = ChangeLog
+
+.PHONY: ChangeLog
+
+ChangeLog:
+	$(CHANGELOG_CMD)
+
+dist-hook: ChangeLog
diff --git a/X11/fonts/Makefile.in b/X11/fonts/Makefile.in
index 9bae52072..e176ff096 100644
--- a/X11/fonts/Makefile.in
+++ b/X11/fonts/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,16 +15,13 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
+
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -35,17 +33,71 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+subdir = .
+DIST_COMMON = $(am__configure_deps) $(fonts_HEADERS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/fontsproto.pc.in $(top_srcdir)/configure COPYING \
+	ChangeLog install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES = fontsproto.pc
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(fontsdir)"
+DATA = $(pkgconfig_DATA)
+HEADERS = $(fonts_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+CHANGELOG_CMD = @CHANGELOG_CMD@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -54,6 +106,7 @@ LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -65,27 +118,46 @@ SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
-ac_ct_STRIP = @ac_ct_STRIP@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build_alias = @build_alias@
+builddir = @builddir@
 datadir = @datadir@
+datarootdir = @datarootdir@
+distcleancheck_listfiles = @distcleancheck_listfiles@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host_alias = @host_alias@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
+mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 fontsdir = $(includedir)/X11/fonts
 fonts_HEADERS = \
 	font.h \
@@ -95,211 +167,245 @@ fonts_HEADERS = \
 	fsmasks.h \
 	FSproto.h
 
-
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = fontsproto.pc
-
-EXTRA_DIST = autogen.sh fontsproto.pc.in
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES = fontsproto.pc
-DIST_SOURCES =
-DATA = $(pkgconfig_DATA)
-
-HEADERS = $(fonts_HEADERS)
-
-DIST_COMMON = $(fonts_HEADERS) $(srcdir)/Makefile.in \
-	$(srcdir)/configure COPYING ChangeLog Makefile.am aclocal.m4 \
-	configure configure.ac fontsproto.pc.in install-sh missing \
-	mkinstalldirs
+EXTRA_DIST = fontsproto.pc.in ChangeLog
+MAINTAINERCLEANFILES = ChangeLog
 all: all-am
 
 .SUFFIXES:
-
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno
-$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-
-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
-$(srcdir)/configure:  $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
 
-$(ACLOCAL_M4):  configure.ac 
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-fontsproto.pc: $(top_builddir)/config.status fontsproto.pc.in
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+fontsproto.pc: $(top_builddir)/config.status $(srcdir)/fontsproto.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
-uninstall-info-am:
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(pkgconfigdir)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f"; \
-	  $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 	done
 
 uninstall-pkgconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " rm -f $(DESTDIR)$(pkgconfigdir)/$$f"; \
-	  rm -f $(DESTDIR)$(pkgconfigdir)/$$f; \
-	done
-fontsHEADERS_INSTALL = $(INSTALL_HEADER)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
 install-fontsHEADERS: $(fonts_HEADERS)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(fontsdir)
-	@list='$(fonts_HEADERS)'; for p in $$list; do \
+	test -z "$(fontsdir)" || $(MKDIR_P) "$(DESTDIR)$(fontsdir)"
+	@list='$(fonts_HEADERS)'; test -n "$(fontsdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(fontsHEADERS_INSTALL) $$d$$p $(DESTDIR)$(fontsdir)/$$f"; \
-	  $(fontsHEADERS_INSTALL) $$d$$p $(DESTDIR)$(fontsdir)/$$f; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(fontsdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(fontsdir)" || exit $$?; \
 	done
 
 uninstall-fontsHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(fonts_HEADERS)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " rm -f $(DESTDIR)$(fontsdir)/$$f"; \
-	  rm -f $(DESTDIR)$(fontsdir)/$$f; \
-	done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
+	@list='$(fonts_HEADERS)'; test -n "$(fontsdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(fontsdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(fontsdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
+tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	     $$tags $$unique
-
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = .
-distdir = $(PACKAGE)-$(VERSION)
-
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkinstalldirs) $(distdir)/.
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
-
 dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
 	$(am__remove_distdir)
 
 dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
 # tarfile.
 distcheck: dist
-	$(am__remove_distdir)
-	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
 	chmod -R a-w $(distdir); chmod a+w $(distdir)
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
@@ -312,21 +418,24 @@ distcheck: dist
 	        distuninstallcheck \
 	  && chmod -R a-w "$$dc_install_base" \
 	  && ({ \
-	       (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
 	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
-	  && rm -f $(distdir).tar.gz \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
 	$(am__remove_distdir)
-	@echo "$(distdir).tar.gz is ready for distribution" | \
-	  sed 'h;s/./=/g;p;x;p;x'
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
@@ -346,9 +455,10 @@ distcleancheck: distclean
 check-am: all-am
 check: check-am
 all-am: Makefile $(DATA) $(HEADERS)
-
 installdirs:
-	$(mkinstalldirs) $(DESTDIR)$(pkgconfigdir) $(DESTDIR)$(fontsdir)
+	for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(fontsdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
 install: install-am
 install-exec: install-exec-am
 install-data: install-data-am
@@ -368,11 +478,13 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 clean: clean-am
 
 clean-am: clean-generic mostlyclean-am
@@ -386,18 +498,40 @@ dvi: dvi-am
 
 dvi-am:
 
+html: html-am
+
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am: install-fontsHEADERS install-pkgconfigDATA
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -418,21 +552,33 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-fontsHEADERS uninstall-info-am \
+uninstall-am: uninstall-fontsHEADERS uninstall-pkgconfigDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-generic ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+	distcheck distclean distclean-generic distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-fontsHEADERS install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
+	uninstall uninstall-am uninstall-fontsHEADERS \
 	uninstall-pkgconfigDATA
 
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic ctags \
-	dist dist-all dist-bzip2 dist-gzip distcheck distclean \
-	distclean-generic distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
-	install-fontsHEADERS install-info install-info-am install-man \
-	install-pkgconfigDATA install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-fontsHEADERS uninstall-info-am \
-	uninstall-pkgconfigDATA
+
+.PHONY: ChangeLog
+
+ChangeLog:
+	$(CHANGELOG_CMD)
+
+dist-hook: ChangeLog
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
diff --git a/X11/fonts/aclocal.m4 b/X11/fonts/aclocal.m4
index 50595c27e..f6f7cb9e1 100644
--- a/X11/fonts/aclocal.m4
+++ b/X11/fonts/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.7.9 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,36 +11,116 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-# Do all the work for Automake.                            -*- Autoconf -*-
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
-# This macro actually does too much some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Do all the work for Automake.                             -*- Autoconf -*-
 
-# serial 10
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-AC_PREREQ([2.54])
+# serial 16
 
-# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
-# the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
 
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
 # AM_INIT_AUTOMAKE([OPTIONS])
@@ -54,12 +134,20 @@ m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
 fi
 
 # test whether we have cygpath
@@ -79,6 +167,9 @@ m4_ifval([$2],
  AC_SUBST([PACKAGE], [$1])dnl
  AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
  AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
  AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 
@@ -94,27 +185,46 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
 
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
@@ -125,66 +235,138 @@ AC_PROVIDE_IFELSE([AC_PROG_CXX],
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
+_am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright 2002  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# serial 2
 
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"])
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
 
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.7.9])])
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Helper functions for option handling.                    -*- Autoconf -*-
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# Copyright 2001, 2002  Free Software Foundation, Inc.
+# serial 6
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
 
-# serial 2
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -201,7 +383,7 @@ AC_DEFUN([_AM_SET_OPTION],
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
@@ -209,28 +391,16 @@ AC_DEFUN([_AM_SET_OPTIONS],
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
-#
-# Check to make sure that the build environment is sane.
-#
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 5
 
 # AM_SANITY_CHECK
 # ---------------
@@ -239,16 +409,29 @@ AC_DEFUN([AM_SANITY_CHECK],
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$[*]" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -273,162 +456,14 @@ Check your system clock])
 fi
 AC_MSG_RESULT(yes)])
 
-#  -*- Autoconf -*-
-
-
-# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# AM_AUX_DIR_EXPAND
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-# Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_AUX_DIR_EXPAND], [
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # AM_PROG_INSTALL_STRIP
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+# ---------------------
 # One issue with vendor `install' (even GNU) is that you can't
 # specify the program used to strip binaries.  This is especially
 # annoying in cross-compiling environments, where the build's strip
@@ -446,393 +481,582 @@ dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
 if test "$cross_compiling" != no; then
   AC_CHECK_TOOL([STRIP], [strip], :)
 fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-#                                                          -*- Autoconf -*-
-# Copyright (C) 2003  Free Software Foundation, Inc.
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# serial 2
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
 
-# serial 1
+# Check how to create a tarball.                            -*- Autoconf -*-
 
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+dnl xorg-macros.m4.  Generated from xorg-macros.m4.in xorgversion.m4 by configure.
+dnl
+dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
+dnl 
+dnl Permission is hereby granted, free of charge, to any person obtaining a
+dnl copy of this software and associated documentation files (the
+dnl "Software"), to deal in the Software without restriction, including
+dnl without limitation the rights to use, copy, modify, merge, publish,
+dnl distribute, and/or sell copies of the Software, and to permit persons
+dnl to whom the Software is furnished to do so, provided that the above
+dnl copyright notice(s) and this permission notice appear in all copies of
+dnl the Software and that both the above copyright notice(s) and this
+dnl permission notice appear in supporting documentation.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of a copyright holder
+dnl shall not be used in advertising or otherwise to promote the sale, use
+dnl or other dealings in this Software without prior written authorization
+dnl of the copyright holder.
+
+# XORG_MACROS_VERSION(required-version)
+# -------------------------------------
+# Minimum version: 1.1.0
+#
+# If you're using a macro added in Version 1.1 or newer, include this in
+# your configure.ac with the minimum required version, such as:
+# XORG_MACROS_VERSION(1.1)
+#
+# To ensure that this macro is defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION],
+#     [m4_fatal([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+#
+#
+# See the "minimum version" comment for each macro you use to see what 
+# version you require.
+m4_defun([XORG_MACROS_VERSION],[
+m4_define([vers_have], [1.2.2])
+m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
+m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
+m4_if(m4_cmp(maj_have, maj_needed), 0,,
+    [m4_fatal([xorg-macros major version ]maj_needed[ is required but ]vers_have[ found])])
+m4_if(m4_version_compare(vers_have, [$1]), -1,
+    [m4_fatal([xorg-macros version $1 or higher is required but ]vers_have[ found])])
+m4_undefine([vers_have])
+m4_undefine([maj_have])
+m4_undefine([maj_needed])
+]) # XORG_MACROS_VERSION
+
+# XORG_PROG_RAWCPP()
+# ------------------
+# Minimum version: 1.0.0
+#
+# Find cpp program and necessary flags for use in pre-processing text files
+# such as man pages and config files
+AC_DEFUN([XORG_PROG_RAWCPP],[
+AC_REQUIRE([AC_PROG_CPP])
+AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}], 
+   [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])
+
+# Check for flag to avoid builtin definitions - assumes unix is predefined,
+# which is not the best choice for supporting other OS'es, but covers most
+# of the ones we need for now.
+AC_MSG_CHECKING([if $RAWCPP requires -undef])
+AC_LANG_CONFTEST([Does cpp redefine unix ?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+	AC_MSG_RESULT([no])
 else
-  am__leading_dot=_
+	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS=-undef
+		AC_MSG_RESULT([yes])
+	# under Cygwin unix is still defined even with -undef
+	elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS="-undef -ansi"
+		AC_MSG_RESULT([yes, with -ansi])
+	else
+		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
+	fi
 fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
+rm -f conftest.$ac_ext
 
-# serial 5						-*- Autoconf -*-
+AC_MSG_CHECKING([if $RAWCPP requires -traditional])
+AC_LANG_CONFTEST([Does cpp preserve   "whitespace"?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+AC_SUBST(RAWCPPFLAGS)
+]) # XORG_PROG_RAWCPP
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003  Free Software Foundation, Inc.
+# XORG_MANPAGE_SECTIONS()
+# -----------------------
+# Minimum version: 1.0.0
+#
+# Determine which sections man pages go in for the different man page types
+# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
+# Not sure if there's any better way than just hardcoding by OS name.
+# Override default settings by setting environment variables
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+AC_DEFUN([XORG_MANPAGE_SECTIONS],[
+AC_REQUIRE([AC_CANONICAL_HOST])
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+if test x$APP_MAN_SUFFIX = x    ; then
+    APP_MAN_SUFFIX=1
+fi
+if test x$APP_MAN_DIR = x    ; then
+    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
+fi
 
+if test x$LIB_MAN_SUFFIX = x    ; then
+    LIB_MAN_SUFFIX=3
+fi
+if test x$LIB_MAN_DIR = x    ; then
+    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
+fi
 
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+if test x$FILE_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	FILE_MAN_SUFFIX=4  ;;
+	*)		FILE_MAN_SUFFIX=5  ;;
+    esac
+fi
+if test x$FILE_MAN_DIR = x    ; then
+    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
+fi
 
+if test x$MISC_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	MISC_MAN_SUFFIX=5  ;;
+	*)		MISC_MAN_SUFFIX=7  ;;
+    esac
+fi
+if test x$MISC_MAN_DIR = x    ; then
+    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
+fi
 
+if test x$DRIVER_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
+	*)		DRIVER_MAN_SUFFIX=4  ;;
+    esac
+fi
+if test x$DRIVER_MAN_DIR = x    ; then
+    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
+fi
 
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      : > sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
+if test x$ADMIN_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	ADMIN_MAN_SUFFIX=1m ;;
+	*)		ADMIN_MAN_SUFFIX=8  ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored.
-      if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
+fi
+if test x$ADMIN_MAN_DIR = x    ; then
+    ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
+fi
 
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
+
+AC_SUBST([APP_MAN_SUFFIX])
+AC_SUBST([LIB_MAN_SUFFIX])
+AC_SUBST([FILE_MAN_SUFFIX])
+AC_SUBST([MISC_MAN_SUFFIX])
+AC_SUBST([DRIVER_MAN_SUFFIX])
+AC_SUBST([ADMIN_MAN_SUFFIX])
+AC_SUBST([APP_MAN_DIR])
+AC_SUBST([LIB_MAN_DIR])
+AC_SUBST([FILE_MAN_DIR])
+AC_SUBST([MISC_MAN_DIR])
+AC_SUBST([DRIVER_MAN_DIR])
+AC_SUBST([ADMIN_MAN_DIR])
+]) # XORG_MANPAGE_SECTIONS
+
+# XORG_CHECK_LINUXDOC
+# -------------------
+# Minimum version: 1.0.0
+#
+# Defines the variable MAKE_TEXT if the necessary tools and
+# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
+# Whether or not the necessary tools and files are found can be checked
+# with the AM_CONDITIONAL "BUILD_LINUXDOC"
+AC_DEFUN([XORG_CHECK_LINUXDOC],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
 fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
+HAVE_DEFS_ENT=
 
+if test x"$cross_compiling" = x"yes" ; then
+  HAVE_DEFS_ENT=no
+else
+  AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+fi
 
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
+AC_PATH_PROG(LINUXDOC, linuxdoc)
+AC_PATH_PROG(PS2PDF, ps2pdf)
 
+AC_MSG_CHECKING([Whether to build documentation])
 
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking Speeds up one-time builds
-  --enable-dependency-tracking  Do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
+if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
+   BUILDDOC=yes
+else
+   BUILDDOC=no
 fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
 
-# Generate code to set up dependency tracking.   -*- Autoconf -*-
+AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])
 
-# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+AC_MSG_RESULT([$BUILDDOC])
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+AC_MSG_CHECKING([Whether to build pdf documentation])
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
+   BUILDPDFDOC=yes
+else
+   BUILDPDFDOC=no
+fi
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
 
-#serial 2
+AC_MSG_RESULT([$BUILDPDFDOC])
 
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
-  # Extract the definition of DEP_FILES from the Makefile without
-  # running `make'.
-  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n -e '/^U = / s///p' < "$mf"`
-  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-  # We invoke sed twice because it is the simplest approach to
-  # changing $(DEPDIR) to its actual value in the expansion.
-  for file in `sed -n -e '
-    /^DEP_FILES = .*\\\\$/ {
-      s/^DEP_FILES = //
-      :loop
-	s/\\\\$//
-	p
-	n
-	/\\\\$/ b loop
-      p
-    }
-    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
+MAKE_PDF="$PS2PDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"
 
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_LINUXDOC
 
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
+# XORG_CHECK_DOCBOOK
+# -------------------
+# Minimum version: 1.0.0
+#
+# Checks for the ability to build output formats from SGML DocBook source.
+# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
+# indicates whether the necessary tools and files are found and, if set,
+# $(MAKE_XXX) blah.sgml will produce blah.xxx.
+AC_DEFUN([XORG_CHECK_DOCBOOK],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+BUILDTXTDOC=no
+BUILDPDFDOC=no
+BUILDPSDOC=no
+BUILDHTMLDOC=no
+
+AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+
+AC_PATH_PROG(DOCBOOKPS, docbook2ps)
+AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
+AC_PATH_PROG(DOCBOOKHTML, docbook2html)
+AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
+
+AC_MSG_CHECKING([Whether to build text documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
+   test x$BUILD_TXTDOC != xno; then
+	BUILDTXTDOC=yes
+fi
+AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
+AC_MSG_RESULT([$BUILDTXTDOC])
 
-# Check to see how 'make' treats includes.	-*- Autoconf -*-
+AC_MSG_CHECKING([Whether to build PDF documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
+   test x$BUILD_PDFDOC != xno; then
+	BUILDPDFDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+AC_MSG_RESULT([$BUILDPDFDOC])
 
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+AC_MSG_CHECKING([Whether to build PostScript documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
+   test x$BUILD_PSDOC != xno; then
+	BUILDPSDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
+AC_MSG_RESULT([$BUILDPSDOC])
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+AC_MSG_CHECKING([Whether to build HTML documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
+   test x$BUILD_HTMLDOC != xno; then
+	BUILDHTMLDOC=yes
+fi
+AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
+AC_MSG_RESULT([$BUILDHTMLDOC])
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
+MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_DOCBOOK
 
-# serial 2
+# XORG_CHECK_MALLOC_ZERO
+# ----------------------
+# Minimum version: 1.0.0
+#
+# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
+# malloc(0) returns NULL.  Packages should add one of these cflags to
+# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
+AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
+AC_ARG_ENABLE(malloc0returnsnull,
+	AC_HELP_STRING([--enable-malloc0returnsnull],
+		       [malloc(0) returns NULL (default: auto)]),
+	[MALLOC_ZERO_RETURNS_NULL=$enableval],
+	[MALLOC_ZERO_RETURNS_NULL=auto])
+
+AC_MSG_CHECKING([whether malloc(0) returns NULL])
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
+	AC_RUN_IFELSE([
+char *malloc();
+char *realloc();
+char *calloc();
+main() {
+    char *m0, *r0, *c0, *p;
+    m0 = malloc(0);
+    p = malloc(10);
+    r0 = realloc(p,0);
+    c0 = calloc(0);
+    exit(m0 == 0 || r0 == 0 || c0 == 0 ? 0 : 1);
+}],
+		[MALLOC_ZERO_RETURNS_NULL=yes],
+		[MALLOC_ZERO_RETURNS_NULL=no])
+fi
+AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])
 
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
+	MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
+	XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
+	XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
+else
+	MALLOC_ZERO_CFLAGS=""
+	XMALLOC_ZERO_CFLAGS=""
+	XTMALLOC_ZERO_CFLAGS=""
 fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
 
-# AM_CONDITIONAL                                              -*- Autoconf -*-
+AC_SUBST([MALLOC_ZERO_CFLAGS])
+AC_SUBST([XMALLOC_ZERO_CFLAGS])
+AC_SUBST([XTMALLOC_ZERO_CFLAGS])
+]) # XORG_CHECK_MALLOC_ZERO
 
-# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
+# XORG_WITH_LINT()
+# ----------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for source checkers such as lint and sparse if --with-lint
+# is specified.   (Use --with-lint=sparse for sparse.)
+# Sets $LINT to name of source checker passed with --with-lint (default: lint)
+# Sets $LINT_FLAGS to flags to pass to source checker
+# Sets LINT automake conditional if enabled (default: disabled)
+#
+AC_DEFUN([XORG_WITH_LINT],[
+
+# Allow checking code with lint, sparse, etc.
+AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
+		[Use a lint-style source code checker (default: disabled)])],
+		[use_lint=$withval], [use_lint=no])
+if test "x$use_lint" = "xyes" ; then
+	LINT="lint"
+else
+	LINT="$use_lint"
+fi
+if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
+    case $LINT in
+	lint|*/lint)
+	    case $host_os in
+		solaris*)
+			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
+			;;
+	    esac
+	    ;;
+    esac
+fi
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+AC_SUBST(LINT)
+AC_SUBST(LINT_FLAGS)
+AM_CONDITIONAL(LINT, [test x$LINT != xno])
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+]) # XORG_WITH_LINT
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# XORG_LINT_LIBRARY(LIBNAME)
+# --------------------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for building lint libraries for checking programs that call
+# functions in the library.
+# Disabled by default, enable with --enable-lint-library
+# Sets: 
+#	@LINTLIB@		- name of lint library file to make
+#	MAKE_LINT_LIB		- automake conditional
+#
 
-# serial 5
+AC_DEFUN([XORG_LINT_LIBRARY],[
+AC_REQUIRE([XORG_WITH_LINT])
+# Build lint "library" for more indepth checks of programs calling this library
+AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
+	[Create lint library (default: disabled)])],
+	[make_lint_lib=$enableval], [make_lint_lib=no])
+if test "x$make_lint_lib" != "xno" ; then
+	if test "x$LINT" = "xno" ; then
+		AC_MSG_ERROR([Cannot make lint library without --with-lint])
+	fi
+	if test "x$make_lint_lib" = "xyes" ; then
+		LINTLIB=llib-l$1.ln
+	else
+		LINTLIB=$make_lint_lib
+	fi
+fi
+AC_SUBST(LINTLIB)
+AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
 
-AC_PREREQ(2.52)
+]) # XORG_LINT_LIBRARY
 
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-        [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
+# XORG_CWARNFLAGS
+# ---------------
+# Minimum version: 1.2.0
+#
+# Defines CWARNFLAGS to enable C compiler warnings.
+#
+AC_DEFUN([XORG_CWARNFLAGS], [
+AC_REQUIRE([AC_PROG_CC])
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `$CC -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
+	;;
+    esac
 else
-  $1_TRUE='#'
-  $1_FALSE=
+    AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
+    fi
 fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.])
-fi])])
-
+AC_SUBST(CWARNFLAGS)
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+]) # XORG_CWARNFLAGS
 dnl Copyright 2005 Red Hat, Inc
 dnl
 dnl Permission to use, copy, modify, distribute, and sell this software and its
@@ -862,7 +1086,8 @@ dnl
 # --------------------
 # Adds --with/without-release-string and changes the PACKAGE and
 # PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION".  If
-# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.
+# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.  Also
+# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
  
 AC_DEFUN([XORG_RELEASE_VERSION],[
 	AC_ARG_WITH(release-version,
@@ -875,5 +1100,39 @@ AC_DEFUN([XORG_RELEASE_VERSION],[
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
 		AC_MSG_NOTICE([Building with package name set to $PACKAGE])
 	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
+		[`echo $PACKAGE_VERSION | cut -d . -f 1`],
+		[Major version of this package])
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
+	if test "x$PVM" = "x"; then
+		PVM="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
+		[$PVM],
+		[Minor version of this package])
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
+	if test "x$PVP" = "x"; then
+		PVP="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
+		[$PVP],
+		[Patch version of this package])
 ])
 
+# XORG_CHANGELOG()
+# ----------------
+# Minimum version: 1.2.0
+#
+# Defines the variable CHANGELOG_CMD as the command to generate
+# ChangeLog from git.
+#
+# Arrange that distcleancheck ignores ChangeLog left over by distclean.
+#
+AC_DEFUN([XORG_CHANGELOG], [
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+AC_SUBST([CHANGELOG_CMD])
+AC_SUBST([distcleancheck_listfiles], ['find . -type f ! -name ChangeLog -print'])
+]) # XORG_CHANGELOG
+
diff --git a/X11/fonts/configure b/X11/fonts/configure
index d57cc806d..e7956ff74 100644
--- a/X11/fonts/configure
+++ b/X11/fonts/configure
@@ -1,27 +1,84 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for FontsProto 2.0.2.
+# Generated by GNU Autoconf 2.63 for FontsProto 2.1.0.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -31,33 +88,60 @@ else
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -65,157 +149,391 @@ fi
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# CDPATH.
+$as_unset CDPATH
 
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
 fi
 
+  if test $as_have_required = yes &&	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
+  case $as_dir in
 	 /*)
-	   if ("$as_dir/$as_base" -c '
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+	done
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell bug-autoconf@gnu.org about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -224,7 +542,28 @@ else
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -233,52 +572,113 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
 
+exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
-exec 6>&1
-
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_clean_files=
 ac_config_libobj_dir=.
+LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
 # Identity of this package.
 PACKAGE_NAME='FontsProto'
 PACKAGE_TARNAME='fontsproto'
-PACKAGE_VERSION='2.0.2'
-PACKAGE_STRING='FontsProto 2.0.2'
+PACKAGE_VERSION='2.1.0'
+PACKAGE_STRING='FontsProto 2.1.0'
 PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot LIBOBJS LTLIBOBJS'
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+distcleancheck_listfiles
+CHANGELOG_CMD
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+with_release_version
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias'
+
 
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -301,34 +701,48 @@ x_libraries=NONE
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -350,33 +764,61 @@ do
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
     datadir=$ac_optarg ;;
 
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -403,6 +845,12 @@ do
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -427,13 +875,16 @@ do
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -498,6 +949,16 @@ do
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -548,26 +1009,38 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "with_$ac_package='$ac_optarg'" ;;
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -587,7 +1060,7 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; }
     ;;
@@ -596,17 +1069,16 @@ Try \`$0 --help' for more information." >&2
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
+    eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
@@ -615,31 +1087,39 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
-done
+fi
 
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  eval ac_val=$`echo $ac_var`
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
   case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
   esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -653,7 +1133,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -666,54 +1146,76 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias-
 test "$silent" = yes && exec 6>/dev/null
 
 
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { $as_echo "$as_me: error: working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
+
+
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
+  if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
    { (exit 1); exit 1; }; }
-  fi
 fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
    { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
 
 #
 # Report the --help message.
@@ -722,7 +1224,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures FontsProto 2.0.2 to adapt to many kinds of systems.
+\`configure' configures FontsProto 2.1.0 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -742,14 +1244,11 @@ Configuration:
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
-_ACEOF
-
-  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -759,18 +1258,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/fontsproto]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -784,7 +1290,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of FontsProto 2.0.2:";;
+     short | recursive ) echo "Configuration of FontsProto 2.1.0:";;
    esac
   cat <<\_ACEOF
 
@@ -796,120 +1302,88 @@ Optional Packages:
 
 Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 _ACEOF
+ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
   done
 fi
 
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-FontsProto configure 2.0.2
-generated by GNU Autoconf 2.59
+FontsProto configure 2.1.0
+generated by GNU Autoconf 2.63
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit 0
+  exit
 fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by FontsProto $as_me 2.0.2, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+It was created by FontsProto $as_me 2.1.0, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
+exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -928,7 +1402,7 @@ uname -v = `(uname -v) 2>/dev/null || echo unknown`
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -940,8 +1414,9 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
+  $as_echo "PATH: $as_dir"
 done
+IFS=$as_save_IFS
 
 } >&5
 
@@ -963,7 +1438,6 @@ _ACEOF
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
-ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -974,8 +1448,8 @@ do
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
     1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -996,9 +1470,7 @@ do
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
+      ac_configure_args="$ac_configure_args '$ac_arg'"
       ;;
     esac
   done
@@ -1009,8 +1481,8 @@ $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1023,20 +1495,35 @@ trap 'exit_status=$?
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
   (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
     *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-}
+    esac |
+    sort
+)
     echo
 
     cat <<\_ASBOX
@@ -1047,22 +1534,28 @@ _ASBOX
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1074,26 +1567,24 @@ _ASBOX
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      cat confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-     ' 0
+' 0
 for ac_signal in 1 2 13 15; do
   trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1123,18 +1614,24 @@ _ACEOF
 
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-for ac_site_file in $CONFIG_SITE; do
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1144,54 +1641,61 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1201,18 +1705,15 @@ echo "$as_me:   current value: $ac_new_val" >&2;}
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
@@ -1237,34 +1738,45 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
+am__api_version='1.11'
 
-am__api_version="1.7"
 ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
     break
-  elif test -f $ac_dir/install.sh; then
+  elif test -f "$ac_dir/install.sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install.sh -c"
     break
-  elif test -f $ac_dir/shtool; then
+  elif test -f "$ac_dir/shtool"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/shtool install -c"
     break
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
    { (exit 1); exit 1; }; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -1279,11 +1791,12 @@ ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -1302,7 +1815,7 @@ case $as_dir/ in
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -1312,30 +1825,43 @@ case $as_dir/ in
 	    # program-specific install script used by HP pwplus--don't use.
 	    :
 	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
     done
     ;;
 esac
+
 done
+IFS=$as_save_IFS
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1345,21 +1871,38 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$*" != "X $srcdir/configure conftest.file" \
@@ -1369,9 +1912,9 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&2;}
    { (exit 1); exit 1; }; }
    fi
@@ -1382,49 +1925,209 @@ then
    # Ok.
    :
 else
-   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
 Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
-
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
 fi
 
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if test "${ac_cv_path_mkdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+done
+IFS=$as_save_IFS
+
+fi
+
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    test -d ./--version && rmdir ./--version
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
   ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -1435,54 +2138,58 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
   test -n "$AWK" && break
 done
 
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
 all:
-	@echo 'ac_maketemp="$(MAKE)"'
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
 rm -f conftest.make
 fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -1495,12 +2202,16 @@ else
 fi
 rmdir .tst 2>/dev/null
 
- # test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
    { (exit 1); exit 1; }; }
+  fi
 fi
 
 # test whether we have cygpath
@@ -1515,7 +2226,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='fontsproto'
- VERSION='2.0.2'
+ VERSION='2.1.0'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -1543,123 +2254,81 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
 
 AMTAR=${AMTAR-"${am_missing_run}tar"}
 
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
 
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
 
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
 
-  STRIP=$ac_ct_STRIP
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
 
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+# Require xorg-macros: XORG_CHANGELOG
+
 
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
 
 
 
 
 
 
-# Check whether --with-release-version or --without-release-version was given.
+
+
+
+
+
+# Check whether --with-release-version was given.
 if test "${with_release_version+set}" = set; then
-  withval="$with_release_version"
-  RELEASE_VERSION="$withval"
+  withval=$with_release_version; RELEASE_VERSION="$withval"
 else
   RELEASE_VERSION=""
-fi;
+fi
+
 	if test "x$RELEASE_VERSION" != "x"; then
 		PACKAGE="$PACKAGE-$RELEASE_VERSION"
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-		{ echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
-echo "$as_me: Building with package name set to $PACKAGE" >&6;}
+		{ $as_echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
+$as_echo "$as_me: Building with package name set to $PACKAGE" >&6;}
+	fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1`
+_ACEOF
+
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
+	if test "x$PVM" = "x"; then
+		PVM="0"
 	fi
 
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_MINOR $PVM
+_ACEOF
+
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
+	if test "x$PVP" = "x"; then
+		PVP="0"
+	fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_PATCHLEVEL $PVP
+_ACEOF
+
+
+
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+
+distcleancheck_listfiles='find . -type f ! -name ChangeLog -print'
+
+
+
+ac_config_files="$ac_config_files Makefile fontsproto.pc"
 
-                    ac_config_files="$ac_config_files Makefile fontsproto.pc"
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -1678,39 +2347,59 @@ _ACEOF
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
   (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       # `set' does not quote correctly, so add quotes (double-quote
       # substitution turns \\\\ into \\, and sed turns \\ into \).
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
+      ;; #(
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-} |
+    esac |
+    sort
+) |
   sed '
+     /^ac_cv_env_/b end
      t clear
-     : clear
+     :clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -1719,63 +2408,54 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
 #
 # If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
+# take arguments), then branch to the quote section.  Otherwise,
 # look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
 t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\),-D\1=\2,g
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
 t quote
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\),-D\1=\2,g
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
 t quote
-d
-: quote
-s,[	 `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
 
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -1783,12 +2463,14 @@ LTLIBOBJS=$ac_ltlibobjs
 
 
 
+
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -1801,22 +2483,78 @@ ac_cs_silent=false
 SHELL=\${CONFIG_SHELL-$SHELL}
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -1826,33 +2564,60 @@ else
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -1860,159 +2625,122 @@ fi
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
+# CDPATH.
+$as_unset CDPATH
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
 
 
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -2021,7 +2749,28 @@ else
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -2030,31 +2779,14 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 exec 6>&1
 
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by FontsProto $as_me 2.0.2, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+# values after options handling.
+ac_log="
+This file was extended by FontsProto $as_me 2.1.0, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -2062,125 +2794,109 @@ generated by GNU Autoconf 2.59.  Invocation command line was
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
 _ACEOF
 
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
 
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
 
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
 
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [FILE]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
 
 Configuration files:
 $config_files
 
 Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-FontsProto config.status 2.0.2
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+FontsProto config.status 2.1.0
+configured by $0, generated by GNU Autoconf 2.63,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
   case $1 in
   --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  -*)
+  *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
     ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
-  *) ac_config_targets="$ac_config_targets $1" ;;
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
 
   esac
   shift
@@ -2194,31 +2910,47 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
 fi
 
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
 
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
+# Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "fontsproto.pc" ) CONFIG_FILES="$CONFIG_FILES fontsproto.pc" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+  case $ac_config_target in
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "fontsproto.pc") CONFIG_FILES="$CONFIG_FILES fontsproto.pc" ;;
+
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
 
+
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -2228,341 +2960,475 @@ if $ac_need_defaults; then
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
   trap '{ (exit 1); exit 1; }' 1 2 13 15
 }
-
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
 } ||
 {
-   echo "$me: cannot create a temporary directory in ." >&2
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr='
'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
 
-#
-# CONFIG_FILES section.
-#
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
 
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
 _ACEOF
 
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_FILES"
 
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
 
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
   ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+ ;;
+
 
-done
-_ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+  esac
+
+done # for ac_tag
+
 
 { (exit 0); exit 0; }
 _ACEOF
 chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -2584,4 +3450,8 @@ if test "$no_create" != yes; then
   # would make configure fail if this is the last instruction.
   $ac_cs_success || { (exit 1); exit 1; }
 fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
 
diff --git a/X11/fonts/configure.ac b/X11/fonts/configure.ac
index a17a47b5a..0582309ba 100644
--- a/X11/fonts/configure.ac
+++ b/X11/fonts/configure.ac
@@ -1,8 +1,12 @@
 AC_PREREQ([2.57])
-AC_INIT([FontsProto], [2.0.2], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg])
+AC_INIT([FontsProto], [2.1.0], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg])
 AM_INIT_AUTOMAKE([foreign dist-bzip2])
 
+# Require xorg-macros: XORG_CHANGELOG
+m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.2 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.2)
 XORG_RELEASE_VERSION
+XORG_CHANGELOG
 
 AC_OUTPUT([Makefile
            fontsproto.pc])
diff --git a/X11/fonts/font.h b/X11/fonts/font.h
index e6a00cddb..b71046b72 100644
--- a/X11/fonts/font.h
+++ b/X11/fonts/font.h
@@ -1,4 +1,3 @@
-/* $Xorg: font.h,v 1.3 2000/08/18 04:05:44 coskrey Exp $ */
 /***********************************************************
 Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
 
@@ -21,8 +20,6 @@ ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
 SOFTWARE.
 
 ******************************************************************/
-/* $XFree86: xc/include/fonts/font.h,v 3.4 2000/11/27 00:10:02 dawes Exp $ */
-/* $NCDXorg: @(#)font.h,v 1.7 1991/06/24 17:00:23 lemke Exp $ */
 
 #ifndef FONT_H
 #define FONT_H
diff --git a/X11/fonts/fontproto.h b/X11/fonts/fontproto.h
index 83c9a00c0..1ab8f3796 100644
--- a/X11/fonts/fontproto.h
+++ b/X11/fonts/fontproto.h
@@ -1,5 +1,3 @@
-/* $XFree86: xc/include/fonts/fontproto.h,v 1.2 1999/09/04 09:14:08 dawes Exp $ */
-
 /***********************************************************
 
 Copyright (c) 1999  The XFree86 Project Inc.
diff --git a/X11/fonts/fontstruct.h b/X11/fonts/fontstruct.h
index 451ed6a12..97e771a94 100644
--- a/X11/fonts/fontstruct.h
+++ b/X11/fonts/fontstruct.h
@@ -1,4 +1,3 @@
-/* $Xorg: fontstruct.h,v 1.3 2000/08/18 04:05:44 coskrey Exp $ */
 /***********************************************************
 Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
 
@@ -21,7 +20,6 @@ ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
 SOFTWARE.
 
 ******************************************************************/
-/* $XFree86: xc/include/fonts/fontstruct.h,v 3.3 1999/08/21 13:47:34 dawes Exp $ */
 
 #ifndef FONTSTR_H
 #define FONTSTR_H
diff --git a/X11/fonts/fsmasks.h b/X11/fonts/fsmasks.h
index 434ee97b5..c86be830e 100644
--- a/X11/fonts/fsmasks.h
+++ b/X11/fonts/fsmasks.h
@@ -1,4 +1,3 @@
-/* $Xorg: fsmasks.h,v 1.4 2001/02/09 02:03:25 xorgcvs Exp $ */
 /*
  * Copyright 1990, 1991 Network Computing Devices;
  * Portions Copyright 1987 by Digital Equipment Corporation 
diff --git a/X11/fonts/install-sh b/X11/fonts/install-sh
index 6ce63b9f7..a5897de6e 100644
--- a/X11/fonts/install-sh
+++ b/X11/fonts/install-sh
@@ -1,7 +1,8 @@
 #!/bin/sh
-#
 # install - install a program, script, or datafile
-#
+
+scriptversion=2006-12-25.00
+
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
 # following copyright and license.
@@ -38,257 +39,481 @@
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
 
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd=$cpprog
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd=$stripprog
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "$0: no input file specified" >&2
-	exit 1
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
 else
-	:
+  doit_exec=$doit
 fi
 
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-
-	if [ -d "$dst" ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "$0: $src does not exist" >&2
-		exit 1
-	fi
-
-	if [ x"$dst" = x ]
-	then
-		echo "$0: no destination specified" >&2
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
 
-	if [ -d "$dst" ]
-	then
-		dst=$dst/`basename "$src"`
-	else
-		:
-	fi
-fi
+src=
+dst=
+dir_arg=
+dst_arg=
 
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+copy_on_change=false
+no_target_directory=
 
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
 
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-$defaultIFS}"
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
 
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
 
-pathcomp=''
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
-while [ $# -ne 0 ] ; do
-	pathcomp=$pathcomp$1
-	shift
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
 
-	if [ ! -d "$pathcomp" ] ;
-        then
-		$mkdirprog "$pathcomp"
-	else
-		:
-	fi
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
 
-	pathcomp=$pathcomp/
-done
-fi
+    -C) copy_on_change=true;;
 
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd "$dst" &&
+    -d) dir_arg=true;;
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
 
-# If we're going to rename the final executable, determine the name now.
+    --help) echo "$usage"; exit $?;;
 
-	if [ x"$transformarg" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		dstfile=`basename "$dst" $transformbasename |
-			sed $transformarg`$transformbasename
-	fi
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
-# don't allow the sed command to completely eliminate the filename
+    -o) chowncmd="$chownprog $2"
+	shift;;
 
-	if [ x"$dstfile" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		:
-	fi
+    -s) stripcmd=$stripprog;;
 
-# Make a couple of temp file names in the proper directory.
+    -t) dst_arg=$2
+	shift;;
 
-	dsttmp=$dstdir/_inst.$$_
-	rmtmp=$dstdir/_rm.$$_
+    -T) no_target_directory=true;;
 
-# Trap to clean up temp files at exit.
+    --version) echo "$0 $scriptversion"; exit $?;;
 
-	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-	trap '(exit $?); exit' 1 2 13 15
+    --)	shift
+	break;;
 
-# Move or copy the file name to the temp name
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
 
-	$doit $instcmd "$src" "$dsttmp" &&
+    *)  break;;
+  esac
+  shift
+done
 
-# and set any options; do chmod last to preserve setuid bits
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
 
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
 
-# Now remove or move aside any old file at destination location.  We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons.  In this case, the final cleanup
-# might fail but the new file should still install successfully.
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dst_arg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst;;
+    esac
 
-{
-	if [ -f "$dstdir/$dstfile" ]
-	then
-		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-		{
-		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		  (exit 1); exit
-		}
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
 	else
-		:
+	  mkdir_mode=
 	fi
-} &&
 
-# Now rename the file to the real destination.
-
-	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
-fi &&
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
 
-# The final little trick to "correctly" pass the exit status to the exit trap.
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
 
-{
-	(exit 0); exit
-}
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/X11/fonts/missing b/X11/fonts/missing
index fc54c64ec..1c8ff7049 100644
--- a/X11/fonts/missing
+++ b/X11/fonts/missing
@@ -1,6 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+#   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -15,8 +19,8 @@
 
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -29,6 +33,8 @@ if test $# -eq 0; then
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -38,18 +44,24 @@ else
   configure_ac=configure.in
 fi
 
-case "$1" in
+msg="missing on your system"
+
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
   shift
   "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
   ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
 
   -h|--h|--he|--hel|--help)
     echo "\
@@ -67,6 +79,7 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -74,11 +87,15 @@ Supported PROGRAM values:
   lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file
   tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.4 - GNU automake"
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
     ;;
 
   -*)
@@ -87,14 +104,44 @@ Supported PROGRAM values:
     exit 1
     ;;
 
-  aclocal*)
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
     if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
        # We have it, but it failed.
        exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
     fi
+    ;;
+esac
 
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+  aclocal*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
          to install the \`Automake' and \`Perl' packages.  Grab them from
          any GNU archive site."
@@ -102,13 +149,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
          archive site."
@@ -116,13 +158,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
          to install the \`Autoconf' and \`GNU m4' packages.  Grab them
          from any GNU archive site."
@@ -130,7 +167,7 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -140,13 +177,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
          You might want to install the \`Automake' and \`Perl' packages.
          Grab them from any GNU archive site."
@@ -156,20 +188,15 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
          proper tools for further handling them.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -185,74 +212,67 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
 
   bison|yacc)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
 
   lex|flex)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
 
   help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
 	touch $file
     else
 	test -z "$file" || exec >$file
@@ -262,32 +282,36 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
          indirectly affecting the aspect of the manual.  The spurious
          call might also be the consequence of using a buggy \`make' (AIX,
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
     touch $file
     ;;
 
   tar)
     shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
 
     # We have already tried tar in the generic part.
     # Look for gnutar/gtar before invocation to avoid ugly error
@@ -300,13 +324,13 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
@@ -323,8 +347,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments.
 
   *)
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
          proper tools for further handling them.  Check the \`README' file,
          it often tells you about the needed prerequisites for installing
          this package.  You may also peek at any GNU archive site, in case
@@ -334,3 +358,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
 esac
 
 exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/X11/xtrans/ChangeLog b/X11/xtrans/ChangeLog
index 9f97eb7e4..1305d27b8 100644
--- a/X11/xtrans/ChangeLog
+++ b/X11/xtrans/ChangeLog
@@ -1,3 +1,121 @@
+commit 4f82ca502d8ec33b0038700675d54539d85d723c
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Fri Jul 31 17:24:25 2009 -0700
+
+    Version 1.2.4
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit e5f52f206916b7c5264b9371f9bd0113632a4a16
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Thu Jul 30 16:07:39 2009 -0700
+
+    Fix ifdef checks for SVR4 to do the right thing on Solaris
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 6d1ad967b894a37f423fd52247df5fcc3bfab1a8
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Mon May 18 18:26:36 2009 -0700
+
+    xfs segfaults in _FontTransSocketReopen when cloning itself
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 1e32f79670a6dc0baae2c2622d2b562f41266ea5
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Fri Apr 24 02:10:53 2009 -0700
+
+    Constify path argument to trans_mkdir()
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 732f3366c40c4bea258b11b96c4763f5948a4844
+Author: Benjamin Close <Benjamin.Close@clearchain.com>
+Date:   Mon Feb 9 16:34:00 2009 +1030
+
+    Update is_numeric base on the declaration change in 389e01fb51ba2d708015e27d8fc17c88a0e55802
+    
+    Signed-off-by: Benjamin Close <Benjamin.Close@clearchain.com>
+
+commit 300893171ca7ad684472e5961a7b2ba0eb291f6b
+Author: Benjamin Close <Benjamin.Close@clearchain.com>
+Date:   Mon Feb 9 16:33:59 2009 +1030
+
+    Revert "Fix "XXX declared 'static' but not defined""
+    
+    This reverts commit d192bac409fe5ef99fa9fb9b5a0d5f656f0f1412.
+    
+    When transport.c is directly include (as in the case of libICE:icetrans.c:32)
+    Xtranssock.c must be included before Xtransutil.c in order for the socket
+    structures to be included. Including Xtransutil.c after Xtranssock.c requires
+    is_number and trans_mkdir to be defined.
+    
+    This reintroduces the warning until a cleaner solution can be found
+    but fixes the build.
+    
+    Found by: Tinderbox
+    
+    Signed-off-by: Benjamin Close <Benjamin.Close@clearchain.com>
+
+commit 389e01fb51ba2d708015e27d8fc17c88a0e55802
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Fri Feb 6 11:31:06 2009 -0800
+
+    Constify string argument to is_numeric
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit cca91ddaae2121f42b2d5c08867bb93df8f9de13
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Fri Feb 6 11:27:02 2009 -0800
+
+    Fix libICE build after code motion in d192bac409...
+    
+    The #ifdef ICE_t case in Xtransutil.c depended on some #includes that
+    are done in files that transport.c previously included before Xtransutil.c
+    but are now after Xtransutil.c is included.
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit d192bac409fe5ef99fa9fb9b5a0d5f656f0f1412
+Author: Tomas Carnecky <tom@dbservice.com>
+Date:   Wed Feb 4 15:26:18 2009 +0100
+
+    Fix "XXX declared 'static' but not defined"
+    
+    The functions are declared static in Xtransint.h but are defined
+    in Xtransutil.c. So when someone (xserver/os/connection.c)
+    incuded Xtransint.h, gcc would throw the warning.
+    I removed the declarations from the header and rearranged includes
+    in transport.c so that Xtransutil.c is included just after
+    Xtransint.h. This way the functions are still defined for the
+    files that need them (Xtranssock.c, Xtranstli.c).
+    
+    Signed-off-by: Tomas Carnecky <tom@dbservice.com>
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 77784ae71b6af1ec270198cfdd5f2eab1fe4a0c0
+Author: Tomas Carnecky <tom@dbservice.com>
+Date:   Wed Feb 4 15:22:28 2009 +0100
+
+    Fix "warning: format not a string literal and no format arguments"
+    
+    Signed-off-by: Tomas Carnecky <tom@dbservice.com>
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit c893bc4aa7a674c6888aacc8249b3c4a8f6bf12a
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date:   Fri Jan 30 18:47:32 2009 -0200
+
+    Janitor: Correct make distcheck and compiler warnings.
+    
+      Compiler warnings are spread on other packages, with a
+    warning in the format:
+    /usr/include/X11/Xtrans/Xtranssock.c:548: warning: 'ciptr' may be used uninitialized in this function
+    so the code was slightly changed so that the compiler
+    would not "think" it could be used without initialization.
+
 commit 1cf4a1a6716f2c0adf5ee4d0a194a1013be53105
 Author: Alan Coopersmith <alan.coopersmith@sun.com>
 Date:   Sun Jan 11 10:54:52 2009 -0800
diff --git a/X11/xtrans/Makefile.am b/X11/xtrans/Makefile.am
index 07e01538b..f30b57ac9 100644
--- a/X11/xtrans/Makefile.am
+++ b/X11/xtrans/Makefile.am
@@ -15,9 +15,9 @@ aclocal_DATA = xtrans.m4
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = xtrans.pc
 
-EXTRA_DIST = xtrans.pc.in ${aclocal_DATA}
+EXTRA_DIST = xtrans.pc.in ${aclocal_DATA} ChangeLog
 
-CLEANFILES = ChangeLog
+MAINTAINERCLEANFILES = ChangeLog
 
 .PHONY: ChangeLog
 
diff --git a/X11/xtrans/Makefile.in b/X11/xtrans/Makefile.in
index 717540d43..35a25134f 100644
--- a/X11/xtrans/Makefile.in
+++ b/X11/xtrans/Makefile.in
@@ -172,8 +172,8 @@ aclocaldir = $(datadir)/aclocal
 aclocal_DATA = xtrans.m4
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = xtrans.pc
-EXTRA_DIST = xtrans.pc.in ${aclocal_DATA}
-CLEANFILES = ChangeLog
+EXTRA_DIST = xtrans.pc.in ${aclocal_DATA} ChangeLog
+MAINTAINERCLEANFILES = ChangeLog
 all: all-am
 
 .SUFFIXES:
@@ -464,7 +464,6 @@ install-strip:
 mostlyclean-generic:
 
 clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
@@ -472,6 +471,7 @@ distclean-generic:
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 clean: clean-am
 
 clean-am: clean-generic mostlyclean-am
diff --git a/X11/xtrans/Xtrans.c b/X11/xtrans/Xtrans.c
index fbe7494f5..d3079ff48 100644
--- a/X11/xtrans/Xtrans.c
+++ b/X11/xtrans/Xtrans.c
@@ -106,7 +106,7 @@ Xtransport_table Xtransports[] = {
 #ifndef sun
     { &TRANS(PTSFuncs),		TRANS_LOCAL_PTS_INDEX },
 #endif /* sun */
-#ifdef SVR4
+#if defined(SVR4) || defined(__SVR4)
     { &TRANS(NAMEDFuncs),	TRANS_LOCAL_NAMED_INDEX },
 #endif
 #ifdef sun
@@ -1352,7 +1352,7 @@ static int TRANS(WriteV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt)
 #endif /* SYSV && __i386__ || WIN32 || __sxg__ */
 
 
-#if defined(_POSIX_SOURCE) || defined(USG) || defined(SVR4) || defined(__SCO__)
+#if defined(_POSIX_SOURCE) || defined(USG) || defined(SVR4) || defined(__SVR4) || defined(__SCO__)
 #ifndef NEED_UTSNAME
 #define NEED_UTSNAME
 #endif
diff --git a/X11/xtrans/Xtransint.h b/X11/xtrans/Xtransint.h
index 523751ed9..cd5b64ff2 100644
--- a/X11/xtrans/Xtransint.h
+++ b/X11/xtrans/Xtransint.h
@@ -94,7 +94,7 @@ from The Open Group.
  * to avoid a race condition. JKJ (6/5/97)
  */
 
-# if defined(_POSIX_SOURCE) || defined(USG) || defined(SVR4) || defined(__SCO__)
+# if defined(_POSIX_SOURCE) || defined(USG) || defined(SVR4) || defined(__SVR4) || defined(__SCO__)
 #  ifndef NEED_UTSNAME
 #   define NEED_UTSNAME
 #  endif
@@ -347,12 +347,12 @@ static int TRANS(WriteV)(
 
 
 static int is_numeric (
-    char *		/* str */
+    const char *	/* str */
 );
 
 #ifdef TRANS_SERVER
 static int trans_mkdir (
-    char *,		/* path */
+    const char *,	/* path */
     int			/* mode */
 );
 #endif
@@ -372,7 +372,7 @@ static int trans_mkdir (
 			int hack= 0, saveerrno=errno; \
                         struct timeval tp;\
                         gettimeofday(&tp,0); \
-			ErrorF(__xtransname); \
+			ErrorF("%s",__xtransname);	\
 			ErrorF(x+hack,a,b,c); \
                         ErrorF("timestamp (ms): %d\n",tp.tv_sec*1000+tp.tv_usec/1000); \
 			errno=saveerrno; \
@@ -382,7 +382,7 @@ static int trans_mkdir (
 			int hack= 0, saveerrno=errno; \
                         struct timeval tp;\
                         gettimeofday(&tp,0); \
-			fprintf(stderr, __xtransname); fflush(stderr); \
+			fprintf(stderr, "%s", __xtransname); fflush(stderr); \
 			fprintf(stderr, x+hack,a,b,c); fflush(stderr); \
                         fprintf(stderr, "timestamp (ms): %d\n",tp.tv_sec*1000+tp.tv_usec/1000); \
                         fflush(stderr); \
@@ -394,14 +394,14 @@ static int trans_mkdir (
 /* Use ErrorF() for the X server */
 #define PRMSG(lvl,x,a,b,c)	if (lvl <= XTRANSDEBUG){ \
 			int hack= 0, saveerrno=errno; \
-			ErrorF(__xtransname); \
+			ErrorF("%s",__xtransname);    \
 			ErrorF(x+hack,a,b,c); \
 			errno=saveerrno; \
 			} else ((void)0)
 #else
 #define PRMSG(lvl,x,a,b,c)	if (lvl <= XTRANSDEBUG){ \
 			int hack= 0, saveerrno=errno; \
-			fprintf(stderr, __xtransname); fflush(stderr); \
+			fprintf(stderr, "%s", __xtransname); fflush(stderr); \
 			fprintf(stderr, x+hack,a,b,c); fflush(stderr); \
 			errno=saveerrno; \
 			} else ((void)0)
diff --git a/X11/xtrans/Xtranslcl.c b/X11/xtrans/Xtranslcl.c
index f6a2468ec..83911565b 100644
--- a/X11/xtrans/Xtranslcl.c
+++ b/X11/xtrans/Xtranslcl.c
@@ -75,7 +75,7 @@ from The Open Group.
 #include <sys/signal.h>
 #include <sys/ioctl.h>
 #include <sys/stat.h>
-#if defined(SVR4)
+#if defined(SVR4) || defined(__SVR4)
 #include <sys/filio.h>
 #endif
 #ifdef sun
diff --git a/X11/xtrans/Xtranssock.c b/X11/xtrans/Xtranssock.c
index 1d11ab011..128bd4a94 100644
--- a/X11/xtrans/Xtranssock.c
+++ b/X11/xtrans/Xtranssock.c
@@ -87,7 +87,7 @@ from the copyright holders.
 #endif /* !NO_TCP_H */
 
 #include <sys/ioctl.h>
-#if defined(SVR4) 
+#if defined(SVR4) || defined(__SVR4)
 #include <sys/filio.h>
 #endif
 
@@ -226,7 +226,7 @@ static int TRANS(SocketINETClose) (XtransConnInfo ciptr);
 #else
 # define SOCKLEN_T socklen_t
 #endif
-#elif defined(SVR4) || defined(__SCO__)
+#elif defined(SVR4) || defined(__SVR4) || defined(__SCO__)
 # define SOCKLEN_T size_t 
 #else
 # define SOCKLEN_T int
@@ -532,7 +532,14 @@ TRANS(SocketReopen) (int i, int type, int fd, char *port)
     ciptr->family = AF_UNIX;
     memcpy(ciptr->peeraddr, ciptr->addr, sizeof(struct sockaddr));
     ciptr->port = rindex(addr->sa_data, ':');
-    if (ciptr->port[0] == ':') ciptr->port++; /* port should now point to portnum or NULL */
+    if (ciptr->port == NULL) {
+	if (is_numeric(addr->sa_data)) {
+	    ciptr->port = addr->sa_data;
+	}
+    } else if (ciptr->port[0] == ':') {
+	ciptr->port++;
+    }
+    /* port should now point to portnum or NULL */
     return ciptr;
 }
 
@@ -559,8 +566,12 @@ TRANS(SocketOpenCOTSClientBase) (char *transname, char *protocol,
 
     while ((i = TRANS(SocketSelectFamily) (i, transname)) >= 0) {
 	if ((ciptr = TRANS(SocketOpen) (
-		 i, Sockettrans2devtab[i].devcotsname)) != NULL)
+		i, Sockettrans2devtab[i].devcotsname)) != NULL) {
+	    /* Save the index for later use */
+
+	    ciptr->index = i;
 	    break;
+	}
     }
     if (i < 0) {
 	if (i == -1)
@@ -572,10 +583,6 @@ TRANS(SocketOpenCOTSClientBase) (char *transname, char *protocol,
 	return NULL;
     }
 
-    /* Save the index for later use */
-
-    ciptr->index = i;
-
     return ciptr;
 }
 
@@ -1191,7 +1198,7 @@ TRANS(SocketUNIXResetListener) (XtransConnInfo ciptr)
     if (!abstract && (
 	stat (unsock->sun_path, &statb) == -1 ||
         ((statb.st_mode & S_IFMT) !=
-#if (defined (sun) && defined(SVR4)) || defined(NCR) || defined(SCO325) || !defined(S_IFSOCK)
+#if defined(NCR) || defined(SCO325) || !defined(S_IFSOCK)
 	  		S_IFIFO
 #else
 			S_IFSOCK
diff --git a/X11/xtrans/Xtransutil.c b/X11/xtrans/Xtransutil.c
index a0c45dc89..42f09c4d1 100644
--- a/X11/xtrans/Xtransutil.c
+++ b/X11/xtrans/Xtransutil.c
@@ -225,6 +225,13 @@ TRANS(ConvertAddress)(int *familyp, int *addrlenp, Xtransaddr **addrp)
 
 #ifdef ICE_t
 
+/* Needed for _XGethostbyaddr usage in TRANS(GetPeerNetworkId) */
+# if defined(TCPCONN) || defined(UNIXCONN)
+#  define X_INCLUDE_NETDB_H
+#  define XOS_USE_NO_LOCKING
+#  include <X11/Xos_r.h>
+# endif
+
 #include <signal.h>
 
 char *
@@ -438,10 +445,10 @@ TRANS(WSAStartup) (void)
 }
 #endif
 
+#include <ctype.h>
 
 static int
-is_numeric (char *str)
-
+is_numeric (const char *str)
 {
     int i;
 
@@ -472,7 +479,7 @@ is_numeric (char *str)
  * bit cannot be set and fail.
  */
 static int 
-trans_mkdir(char *path, int mode)
+trans_mkdir(const char *path, int mode)
 {
     struct stat buf;
 
diff --git a/X11/xtrans/aclocal.m4 b/X11/xtrans/aclocal.m4
index fd31616bb..b45e8b276 100644
--- a/X11/xtrans/aclocal.m4
+++ b/X11/xtrans/aclocal.m4
@@ -16,6 +16,545 @@ m4_if(m4_PACKAGE_VERSION, [2.61],,
 You have another version of autoconf.  If you want to use that,
 you should regenerate the build system entirely.], [63])])
 
+dnl xorg-macros.m4.  Generated from xorg-macros.m4.in xorgversion.m4 by configure.
+dnl
+dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
+dnl 
+dnl Permission is hereby granted, free of charge, to any person obtaining a
+dnl copy of this software and associated documentation files (the
+dnl "Software"), to deal in the Software without restriction, including
+dnl without limitation the rights to use, copy, modify, merge, publish,
+dnl distribute, and/or sell copies of the Software, and to permit persons
+dnl to whom the Software is furnished to do so, provided that the above
+dnl copyright notice(s) and this permission notice appear in all copies of
+dnl the Software and that both the above copyright notice(s) and this
+dnl permission notice appear in supporting documentation.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of a copyright holder
+dnl shall not be used in advertising or otherwise to promote the sale, use
+dnl or other dealings in this Software without prior written authorization
+dnl of the copyright holder.
+
+# XORG_MACROS_VERSION(required-version)
+# -------------------------------------
+# Minimum version: 1.1.0
+#
+# If you're using a macro added in Version 1.1 or newer, include this in
+# your configure.ac with the minimum required version, such as:
+# XORG_MACROS_VERSION(1.1)
+#
+# To force at least a version with this macro defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+#
+#
+# See the "minimum version" comment for each macro you use to see what 
+# version you require.
+AC_DEFUN([XORG_MACROS_VERSION],[
+	[XORG_MACROS_needed_version=$1
+	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
+	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
+	AC_MSG_CHECKING([if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}])
+	[XORG_MACROS_version=1.2.1
+	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
+	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
+	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
+		AC_MSG_ERROR([configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x])
+	fi
+	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
+		AC_MSG_ERROR([configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer])
+	fi
+	AC_MSG_RESULT([yes, $XORG_MACROS_version])
+]) # XORG_MACROS_VERSION
+
+# XORG_PROG_RAWCPP()
+# ------------------
+# Minimum version: 1.0.0
+#
+# Find cpp program and necessary flags for use in pre-processing text files
+# such as man pages and config files
+AC_DEFUN([XORG_PROG_RAWCPP],[
+AC_REQUIRE([AC_PROG_CPP])
+AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}], 
+   [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])
+
+# Check for flag to avoid builtin definitions - assumes unix is predefined,
+# which is not the best choice for supporting other OS'es, but covers most
+# of the ones we need for now.
+AC_MSG_CHECKING([if $RAWCPP requires -undef])
+AC_LANG_CONFTEST([Does cpp redefine unix ?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS=-undef
+		AC_MSG_RESULT([yes])
+	# under Cygwin unix is still defined even with -undef
+	elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS="-undef -ansi"
+		AC_MSG_RESULT([yes, with -ansi])
+	else
+		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+
+AC_MSG_CHECKING([if $RAWCPP requires -traditional])
+AC_LANG_CONFTEST([Does cpp preserve   "whitespace"?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+AC_SUBST(RAWCPPFLAGS)
+]) # XORG_PROG_RAWCPP
+
+# XORG_MANPAGE_SECTIONS()
+# -----------------------
+# Minimum version: 1.0.0
+#
+# Determine which sections man pages go in for the different man page types
+# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
+# Not sure if there's any better way than just hardcoding by OS name.
+# Override default settings by setting environment variables
+
+AC_DEFUN([XORG_MANPAGE_SECTIONS],[
+AC_REQUIRE([AC_CANONICAL_HOST])
+
+if test x$APP_MAN_SUFFIX = x    ; then
+    APP_MAN_SUFFIX=1
+fi
+if test x$APP_MAN_DIR = x    ; then
+    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
+fi
+
+if test x$LIB_MAN_SUFFIX = x    ; then
+    LIB_MAN_SUFFIX=3
+fi
+if test x$LIB_MAN_DIR = x    ; then
+    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
+fi
+
+if test x$FILE_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	FILE_MAN_SUFFIX=4  ;;
+	*)		FILE_MAN_SUFFIX=5  ;;
+    esac
+fi
+if test x$FILE_MAN_DIR = x    ; then
+    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
+fi
+
+if test x$MISC_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	MISC_MAN_SUFFIX=5  ;;
+	*)		MISC_MAN_SUFFIX=7  ;;
+    esac
+fi
+if test x$MISC_MAN_DIR = x    ; then
+    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
+fi
+
+if test x$DRIVER_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
+	*)		DRIVER_MAN_SUFFIX=4  ;;
+    esac
+fi
+if test x$DRIVER_MAN_DIR = x    ; then
+    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
+fi
+
+if test x$ADMIN_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	ADMIN_MAN_SUFFIX=1m ;;
+	*)		ADMIN_MAN_SUFFIX=8  ;;
+    esac
+fi
+if test x$ADMIN_MAN_DIR = x    ; then
+    ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
+fi
+
+
+AC_SUBST([APP_MAN_SUFFIX])
+AC_SUBST([LIB_MAN_SUFFIX])
+AC_SUBST([FILE_MAN_SUFFIX])
+AC_SUBST([MISC_MAN_SUFFIX])
+AC_SUBST([DRIVER_MAN_SUFFIX])
+AC_SUBST([ADMIN_MAN_SUFFIX])
+AC_SUBST([APP_MAN_DIR])
+AC_SUBST([LIB_MAN_DIR])
+AC_SUBST([FILE_MAN_DIR])
+AC_SUBST([MISC_MAN_DIR])
+AC_SUBST([DRIVER_MAN_DIR])
+AC_SUBST([ADMIN_MAN_DIR])
+]) # XORG_MANPAGE_SECTIONS
+
+# XORG_CHECK_LINUXDOC
+# -------------------
+# Minimum version: 1.0.0
+#
+# Defines the variable MAKE_TEXT if the necessary tools and
+# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
+# Whether or not the necessary tools and files are found can be checked
+# with the AM_CONDITIONAL "BUILD_LINUXDOC"
+AC_DEFUN([XORG_CHECK_LINUXDOC],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+
+if test x"$cross_compiling" = x"yes" ; then
+  HAVE_DEFS_ENT=no
+else
+  AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+fi
+
+AC_PATH_PROG(LINUXDOC, linuxdoc)
+AC_PATH_PROG(PS2PDF, ps2pdf)
+
+AC_MSG_CHECKING([Whether to build documentation])
+
+if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
+   BUILDDOC=yes
+else
+   BUILDDOC=no
+fi
+
+AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])
+
+AC_MSG_RESULT([$BUILDDOC])
+
+AC_MSG_CHECKING([Whether to build pdf documentation])
+
+if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
+   BUILDPDFDOC=yes
+else
+   BUILDPDFDOC=no
+fi
+
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
+MAKE_PDF="$PS2PDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_LINUXDOC
+
+# XORG_CHECK_DOCBOOK
+# -------------------
+# Minimum version: 1.0.0
+#
+# Checks for the ability to build output formats from SGML DocBook source.
+# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
+# indicates whether the necessary tools and files are found and, if set,
+# $(MAKE_XXX) blah.sgml will produce blah.xxx.
+AC_DEFUN([XORG_CHECK_DOCBOOK],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+BUILDTXTDOC=no
+BUILDPDFDOC=no
+BUILDPSDOC=no
+BUILDHTMLDOC=no
+
+AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+
+AC_PATH_PROG(DOCBOOKPS, docbook2ps)
+AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
+AC_PATH_PROG(DOCBOOKHTML, docbook2html)
+AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
+
+AC_MSG_CHECKING([Whether to build text documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
+   test x$BUILD_TXTDOC != xno; then
+	BUILDTXTDOC=yes
+fi
+AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
+AC_MSG_RESULT([$BUILDTXTDOC])
+
+AC_MSG_CHECKING([Whether to build PDF documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
+   test x$BUILD_PDFDOC != xno; then
+	BUILDPDFDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+AC_MSG_CHECKING([Whether to build PostScript documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
+   test x$BUILD_PSDOC != xno; then
+	BUILDPSDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
+AC_MSG_RESULT([$BUILDPSDOC])
+
+AC_MSG_CHECKING([Whether to build HTML documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
+   test x$BUILD_HTMLDOC != xno; then
+	BUILDHTMLDOC=yes
+fi
+AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
+AC_MSG_RESULT([$BUILDHTMLDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
+MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_DOCBOOK
+
+# XORG_CHECK_MALLOC_ZERO
+# ----------------------
+# Minimum version: 1.0.0
+#
+# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
+# malloc(0) returns NULL.  Packages should add one of these cflags to
+# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
+AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
+AC_ARG_ENABLE(malloc0returnsnull,
+	AC_HELP_STRING([--enable-malloc0returnsnull],
+		       [malloc(0) returns NULL (default: auto)]),
+	[MALLOC_ZERO_RETURNS_NULL=$enableval],
+	[MALLOC_ZERO_RETURNS_NULL=auto])
+
+AC_MSG_CHECKING([whether malloc(0) returns NULL])
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
+	AC_RUN_IFELSE([
+char *malloc();
+char *realloc();
+char *calloc();
+main() {
+    char *m0, *r0, *c0, *p;
+    m0 = malloc(0);
+    p = malloc(10);
+    r0 = realloc(p,0);
+    c0 = calloc(0);
+    exit(m0 == 0 || r0 == 0 || c0 == 0 ? 0 : 1);
+}],
+		[MALLOC_ZERO_RETURNS_NULL=yes],
+		[MALLOC_ZERO_RETURNS_NULL=no])
+fi
+AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])
+
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
+	MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
+	XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
+	XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
+else
+	MALLOC_ZERO_CFLAGS=""
+	XMALLOC_ZERO_CFLAGS=""
+	XTMALLOC_ZERO_CFLAGS=""
+fi
+
+AC_SUBST([MALLOC_ZERO_CFLAGS])
+AC_SUBST([XMALLOC_ZERO_CFLAGS])
+AC_SUBST([XTMALLOC_ZERO_CFLAGS])
+]) # XORG_CHECK_MALLOC_ZERO
+
+# XORG_WITH_LINT()
+# ----------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for source checkers such as lint and sparse if --with-lint
+# is specified.   (Use --with-lint=sparse for sparse.)
+# Sets $LINT to name of source checker passed with --with-lint (default: lint)
+# Sets $LINT_FLAGS to flags to pass to source checker
+# Sets LINT automake conditional if enabled (default: disabled)
+#
+AC_DEFUN([XORG_WITH_LINT],[
+
+# Allow checking code with lint, sparse, etc.
+AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
+		[Use a lint-style source code checker (default: disabled)])],
+		[use_lint=$withval], [use_lint=no])
+if test "x$use_lint" = "xyes" ; then
+	LINT="lint"
+else
+	LINT="$use_lint"
+fi
+if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
+    case $LINT in
+	lint|*/lint)
+	    case $host_os in
+		solaris*)
+			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
+			;;
+	    esac
+	    ;;
+    esac
+fi
+
+AC_SUBST(LINT)
+AC_SUBST(LINT_FLAGS)
+AM_CONDITIONAL(LINT, [test x$LINT != xno])
+
+]) # XORG_WITH_LINT
+
+# XORG_LINT_LIBRARY(LIBNAME)
+# --------------------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for building lint libraries for checking programs that call
+# functions in the library.
+# Disabled by default, enable with --enable-lint-library
+# Sets: 
+#	@LINTLIB@		- name of lint library file to make
+#	MAKE_LINT_LIB		- automake conditional
+#
+
+AC_DEFUN([XORG_LINT_LIBRARY],[
+AC_REQUIRE([XORG_WITH_LINT])
+# Build lint "library" for more indepth checks of programs calling this library
+AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
+	[Create lint library (default: disabled)])],
+	[make_lint_lib=$enableval], [make_lint_lib=no])
+if test "x$make_lint_lib" != "xno" ; then
+	if test "x$LINT" = "xno" ; then
+		AC_MSG_ERROR([Cannot make lint library without --with-lint])
+	fi
+	if test "x$make_lint_lib" = "xyes" ; then
+		LINTLIB=llib-l$1.ln
+	else
+		LINTLIB=$make_lint_lib
+	fi
+fi
+AC_SUBST(LINTLIB)
+AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
+
+]) # XORG_LINT_LIBRARY
+
+# XORG_CWARNFLAGS
+# ---------------
+# Minimum version: 1.2.0
+#
+# Defines CWARNFLAGS to enable C compiler warnings.
+#
+AC_DEFUN([XORG_CWARNFLAGS], [
+AC_REQUIRE([AC_PROG_CC])
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `gcc -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS+=" -Wold-style-definition -Wdeclaration-after-statement"
+	;;
+    esac
+else
+    AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
+    fi
+fi
+AC_SUBST(CWARNFLAGS)
+]) # XORG_CWARNFLAGS
+dnl Copyright 2005 Red Hat, Inc
+dnl
+dnl Permission to use, copy, modify, distribute, and sell this software and its
+dnl documentation for any purpose is hereby granted without fee, provided that
+dnl the above copyright notice appear in all copies and that both that
+dnl copyright notice and this permission notice appear in supporting
+dnl documentation.
+dnl
+dnl The above copyright notice and this permission notice shall be included
+dnl in all copies or substantial portions of the Software.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+dnl OTHER DEALINGS IN THE SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of the copyright holders shall
+dnl not be used in advertising or otherwise to promote the sale, use or
+dnl other dealings in this Software without prior written authorization
+dnl from the copyright holders.
+dnl
+
+# XORG_RELEASE_VERSION
+# --------------------
+# Adds --with/without-release-string and changes the PACKAGE and
+# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION".  If
+# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.  Also
+# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
+ 
+AC_DEFUN([XORG_RELEASE_VERSION],[
+	AC_ARG_WITH(release-version,
+			AC_HELP_STRING([--with-release-version=STRING],
+				[Use release version string in package name]),
+			[RELEASE_VERSION="$withval"],
+			[RELEASE_VERSION=""])
+	if test "x$RELEASE_VERSION" != "x"; then
+		PACKAGE="$PACKAGE-$RELEASE_VERSION"
+		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
+		AC_MSG_NOTICE([Building with package name set to $PACKAGE])
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
+		[`echo $PACKAGE_VERSION | cut -d . -f 1`],
+		[Major version of this package])
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
+	if test "x$PVM" = "x"; then
+		PVM="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
+		[$PVM],
+		[Minor version of this package])
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
+	if test "x$PVP" = "x"; then
+		PVP="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
+		[$PVP],
+		[Patch version of this package])
+])
+
+# XORG_CHANGELOG()
+# ----------------
+# Minimum version: 1.2.0
+#
+# Defines the variable CHANGELOG_CMD as the command to generate
+# ChangeLog from git.
+#
+# Arrange that distcleancheck ignores ChangeLog left over by distclean.
+#
+AC_DEFUN([XORG_CHANGELOG], [
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+AC_SUBST([CHANGELOG_CMD])
+AC_SUBST([distcleancheck_listfiles], ['find . -type f ! -name ChangeLog -print'])
+]) # XORG_CHANGELOG
+
 # Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
@@ -926,27 +1465,24 @@ dnl of the copyright holder.
 # your configure.ac with the minimum required version, such as:
 # XORG_MACROS_VERSION(1.1)
 #
-# To force at least a version with this macro defined, also add:
-# m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+# To ensure that this macro is defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION],
+#     [m4_fatal([must install xorg-macros 1.1 or later before running autoconf/autogen])])
 #
 #
 # See the "minimum version" comment for each macro you use to see what 
 # version you require.
-AC_DEFUN([XORG_MACROS_VERSION],[
-	[XORG_MACROS_needed_version=$1
-	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
-	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
-	AC_MSG_CHECKING([if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}])
-	[XORG_MACROS_version=1.2.1
-	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
-	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
-	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
-		AC_MSG_ERROR([configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x])
-	fi
-	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
-		AC_MSG_ERROR([configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer])
-	fi
-	AC_MSG_RESULT([yes, $XORG_MACROS_version])
+m4_defun([XORG_MACROS_VERSION],[
+m4_define([vers_have], [1.2.2])
+m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
+m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
+m4_if(m4_cmp(maj_have, maj_needed), 0,,
+    [m4_fatal([xorg-macros major version ]maj_needed[ is required but ]vers_have[ found])])
+m4_if(m4_version_compare(vers_have, [$1]), -1,
+    [m4_fatal([xorg-macros version $1 or higher is required but ]vers_have[ found])])
+m4_undefine([vers_have])
+m4_undefine([maj_have])
+m4_undefine([maj_needed])
 ]) # XORG_MACROS_VERSION
 
 # XORG_PROG_RAWCPP()
@@ -1336,9 +1872,9 @@ if  test "x$GCC" = xyes ; then
     CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
 -Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
 -Wbad-function-cast"
-    case `gcc -dumpversion` in
+    case `$CC -dumpversion` in
     3.4.* | 4.*)
-	CWARNFLAGS+=" -Wold-style-definition -Wdeclaration-after-statement"
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
 	;;
     esac
 else
diff --git a/X11/xtrans/configure b/X11/xtrans/configure
index d62afa5a3..6cce58999 100644
--- a/X11/xtrans/configure
+++ b/X11/xtrans/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for xtrans 1.2.3.
+# Generated by GNU Autoconf 2.61 for xtrans 1.2.4.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
@@ -574,8 +574,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='xtrans'
 PACKAGE_TARNAME='xtrans'
-PACKAGE_VERSION='1.2.3'
-PACKAGE_STRING='xtrans 1.2.3'
+PACKAGE_VERSION='1.2.4'
+PACKAGE_STRING='xtrans 1.2.4'
 PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
 
 ac_subst_vars='SHELL
@@ -1173,7 +1173,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures xtrans 1.2.3 to adapt to many kinds of systems.
+\`configure' configures xtrans 1.2.4 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1239,7 +1239,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of xtrans 1.2.3:";;
+     short | recursive ) echo "Configuration of xtrans 1.2.4:";;
    esac
   cat <<\_ACEOF
 
@@ -1330,7 +1330,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-xtrans configure 1.2.3
+xtrans configure 1.2.4
 generated by GNU Autoconf 2.61
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1344,7 +1344,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by xtrans $as_me 1.2.3, which was
+It was created by xtrans $as_me 1.2.4, which was
 generated by GNU Autoconf 2.61.  Invocation command line was
 
   $ $0 $@
@@ -2034,7 +2034,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='xtrans'
- VERSION='1.2.3'
+ VERSION='1.2.4'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2206,26 +2206,14 @@ fi
 # Require xorg-macros version 1.2.0 or newer for XORG_CHANGELOG macro
 
 
-	XORG_MACROS_needed_version=1.2
-	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
-	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
-	{ echo "$as_me:$LINENO: checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}" >&5
-echo $ECHO_N "checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}... $ECHO_C" >&6; }
-	XORG_MACROS_version=1.2.1
-	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
-	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
-	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
-		{ { echo "$as_me:$LINENO: error: configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" >&5
-echo "$as_me: error: configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" >&2;}
-   { (exit 1); exit 1; }; }
-	fi
-	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
-		{ { echo "$as_me:$LINENO: error: configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" >&5
-echo "$as_me: error: configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" >&2;}
-   { (exit 1); exit 1; }; }
-	fi
-	{ echo "$as_me:$LINENO: result: yes, $XORG_MACROS_version" >&5
-echo "${ECHO_T}yes, $XORG_MACROS_version" >&6; }
+
+
+
+
+
+
+
+
 
 
 # Because xtrans is included into other modules rather than being linked
@@ -3919,7 +3907,7 @@ exec 6>&1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by xtrans $as_me 1.2.3, which was
+This file was extended by xtrans $as_me 1.2.4, which was
 generated by GNU Autoconf 2.61.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -3966,7 +3954,7 @@ Report bugs to <bug-autoconf@gnu.org>."
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
-xtrans config.status 1.2.3
+xtrans config.status 1.2.4
 configured by $0, generated by GNU Autoconf 2.61,
   with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
diff --git a/X11/xtrans/configure.ac b/X11/xtrans/configure.ac
index cf5ec7150..3fcf515c9 100644
--- a/X11/xtrans/configure.ac
+++ b/X11/xtrans/configure.ac
@@ -21,7 +21,7 @@ dnl
 dnl Process this file with autoconf to create configure.
 
 AC_PREREQ([2.57])
-AC_INIT(xtrans, 1.2.3, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], xtrans)
+AC_INIT(xtrans, 1.2.4, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], xtrans)
 AM_INIT_AUTOMAKE([dist-bzip2])
 AM_MAINTAINER_MODE
 
diff --git a/libX11/ChangeLog b/libX11/ChangeLog
index c28af9157..2d0b18eba 100644
--- a/libX11/ChangeLog
+++ b/libX11/ChangeLog
@@ -1,3 +1,132 @@
+commit 9da7e230d5320e1556ad2084fcd06ee7994385ea
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Wed Aug 5 14:15:02 2009 +1000
+
+    Bump to 1.2.99.901 (1.3 RC1)
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 8f78c7b4e3570cd46c5a220982963c17fe2157b8
+Author: Filippo Giunchedi <filippo@debian.org>
+Date:   Sat Jun 6 16:56:54 2009 +0200
+
+    nls: add {left,right}wards arrow to compose table
+    
+    Debian bug#532117 <http://bugs.debian.org/532117>
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 7949bfa00390241d994f32463e50d4bd78920568
+Author: Julien Cristau <jcristau@debian.org>
+Date:   Fri Jul 31 13:33:52 2009 +0200
+
+    Update library version for new symbols
+    
+    Commit 554f755e5545f63d3c8f299297927238da155773 added generic event
+    cookie handling.  Bump libX11 version number accordingly.
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 640fec5f4feacd01a00eea3dcd4edb220907d3dc
+Author: Julien Cristau <jcristau@debian.org>
+Date:   Sun Aug 2 17:18:31 2009 +0200
+
+    Add _XFUNCPROTOBEGIN/END to Xlib-xcb.h
+    
+    X.Org bug#22252 <https://bugs.freedesktop.org/show_bug.cgi?id=22252>
+    
+    Reported-by: Riku Salminen <rsalmin2@cc.hut.fi>
+    Signed-off-by: Julien Cristau <jcristau@debian.org>
+
+commit bc06d49e9dac1836d6824769ddb2ac5ba9f14df7
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Wed Jul 29 08:44:09 2009 +1000
+
+    Fix compiler warning 'unused variable qelt'
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 03f4907e14f5755e72309f08742977b871e81e33
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Wed Jul 29 08:34:57 2009 +1000
+
+    Add utlist.h to the Makefile.am
+    
+    utlist.h contains the linked list macros, it was added with the recent
+    addition of event cookies but utlist.h wasn't added to the Makefile.am. As a
+    result, make dist failed.
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 554f755e5545f63d3c8f299297927238da155773
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Fri Jun 26 11:27:43 2009 +1000
+
+    Add generic event cookie handling to libX11.
+    
+    Generic events require more bytes than Xlib provides in the standard XEvent.
+    Memory allocated by the extension and stored as pointers inside the event is
+    prone to leak by simple 'while (1) { XNextEvent(...); }' loops.
+    
+    This patch adds cookie handling for generic events. Extensions may register
+    a cookie handler in addition to the normal event vectors. If an extension
+    has registered a cookie handler, _all_ generic events for this extensions
+    must be handled through cookies. Otherwise, the default event handler is
+    used.
+    
+    The cookie handler must return an XGenericEventCookie with a pointer to the
+    data.The rest of the event (type, serialNumber, etc.) are to be filled as
+    normal. When a client retrieves such a cookie event, the data is stored in
+    an internal queue (the 'cookiejar'). This data is freed on the next call to
+    XNextEvent().
+    
+    New extension interfaces:
+        XESetWireToEventCookie(display, extension_number, cookie_handler)
+    
+    Where cookie_handler must set cookie->data. The data pointer is of arbitray
+    size and type but must be a single memory block. This memory block
+    represents the actual extension's event.
+    
+    New client interfaces:
+        XGetEventData(display, *cookie);
+        XFreeEventData(display, *cookie);
+    
+    If the client needs the actual event data, it must call XGetEventData() with
+    the cookie. This returns the data pointer (and removes it from the cookie
+    jar) and the client is then responsible for freeing the event with
+    XFreeEventData(). It is safe to call either function with a non-cookie
+    event. Events unclaimed or not handled by the XGetEventData() are cleaned up
+    automatically.
+    
+    Example client code:
+        XEvent event;
+        XGenericEventCookie *cookie = &ev;
+    
+        XNextEvent(display, &event);
+        if (XGetEventData(display, cookie)) {
+            XIEvent *xievent = cookie->data;
+            ...
+        } else if (cookie->type == GenericEvent) {
+            /* handle generic event */
+        } else {
+            /* handle extension/core event */
+        }
+        XFreeEventData(display, cookie);
+    
+    Cookies are not multi-threading safe. Clients that use XGetEventData() must
+    lock between XNextEvent and XGetEventData to avoid other threads freeing
+    cookies.
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit d7675cb8fa7155e7aff1459636a117a97aa1bf28
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Mon Jul 6 13:17:35 2009 +1000
+
+    Bump to 1.2.99.1
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
 commit 75fe48e7a42a685d7098e8d7108b9b956c471563
 Author: Peter Hutterer <peter.hutterer@who-t.net>
 Date:   Fri Jul 10 14:07:34 2009 +1000
diff --git a/libX11/aclocal.m4 b/libX11/aclocal.m4
index 6ef603015..52271427a 100644
--- a/libX11/aclocal.m4
+++ b/libX11/aclocal.m4
@@ -8161,27 +8161,24 @@ dnl of the copyright holder.
 # your configure.ac with the minimum required version, such as:
 # XORG_MACROS_VERSION(1.1)
 #
-# To force at least a version with this macro defined, also add:
-# m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+# To ensure that this macro is defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION],
+#     [m4_fatal([must install xorg-macros 1.1 or later before running autoconf/autogen])])
 #
 #
 # See the "minimum version" comment for each macro you use to see what 
 # version you require.
-AC_DEFUN([XORG_MACROS_VERSION],[
-	[XORG_MACROS_needed_version=$1
-	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
-	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
-	AC_MSG_CHECKING([if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}])
-	[XORG_MACROS_version=1.2.1
-	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
-	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
-	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
-		AC_MSG_ERROR([configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x])
-	fi
-	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
-		AC_MSG_ERROR([configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer])
-	fi
-	AC_MSG_RESULT([yes, $XORG_MACROS_version])
+m4_defun([XORG_MACROS_VERSION],[
+m4_define([vers_have], [1.2.2])
+m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
+m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
+m4_if(m4_cmp(maj_have, maj_needed), 0,,
+    [m4_fatal([xorg-macros major version ]maj_needed[ is required but ]vers_have[ found])])
+m4_if(m4_version_compare(vers_have, [$1]), -1,
+    [m4_fatal([xorg-macros version $1 or higher is required but ]vers_have[ found])])
+m4_undefine([vers_have])
+m4_undefine([maj_have])
+m4_undefine([maj_needed])
 ]) # XORG_MACROS_VERSION
 
 # XORG_PROG_RAWCPP()
@@ -8571,9 +8568,9 @@ if  test "x$GCC" = xyes ; then
     CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
 -Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
 -Wbad-function-cast"
-    case `gcc -dumpversion` in
+    case `$CC -dumpversion` in
     3.4.* | 4.*)
-	CWARNFLAGS+=" -Wold-style-definition -Wdeclaration-after-statement"
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
 	;;
     esac
 else
diff --git a/libX11/configure b/libX11/configure
index 40002f063..e991244da 100644
--- a/libX11/configure
+++ b/libX11/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for libX11 1.2.2.
+# Generated by GNU Autoconf 2.63 for libX11 1.2.99.901.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
@@ -745,8 +745,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='libX11'
 PACKAGE_TARNAME='libX11'
-PACKAGE_VERSION='1.2.2'
-PACKAGE_STRING='libX11 1.2.2'
+PACKAGE_VERSION='1.2.99.901'
+PACKAGE_STRING='libX11 1.2.99.901'
 PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
 
 ac_unique_file="Makefile.am"
@@ -1582,7 +1582,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libX11 1.2.2 to adapt to many kinds of systems.
+\`configure' configures libX11 1.2.99.901 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1652,7 +1652,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libX11 1.2.2:";;
+     short | recursive ) echo "Configuration of libX11 1.2.99.901:";;
    esac
   cat <<\_ACEOF
 
@@ -1799,7 +1799,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libX11 configure 1.2.2
+libX11 configure 1.2.99.901
 generated by GNU Autoconf 2.63
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1813,7 +1813,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libX11 $as_me 1.2.2, which was
+It was created by libX11 $as_me 1.2.99.901, which was
 generated by GNU Autoconf 2.63.  Invocation command line was
 
   $ $0 $@
@@ -2663,7 +2663,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='libX11'
- VERSION='1.2.2'
+ VERSION='1.2.99.901'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2736,26 +2736,14 @@ ac_config_headers="$ac_config_headers include/X11/XlibConf.h"
 # Require xorg-macros: XORG_CWARNFLAGS, XORG_CHANGELOG, XORG_WITH_LINT
 
 
-	XORG_MACROS_needed_version=1.2
-	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
-	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
-	{ $as_echo "$as_me:$LINENO: checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}" >&5
-$as_echo_n "checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}... " >&6; }
-	XORG_MACROS_version=1.2.1
-	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
-	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
-	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
-		{ { $as_echo "$as_me:$LINENO: error: configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" >&5
-$as_echo "$as_me: error: configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" >&2;}
-   { (exit 1); exit 1; }; }
-	fi
-	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
-		{ { $as_echo "$as_me:$LINENO: error: configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" >&5
-$as_echo "$as_me: error: configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" >&2;}
-   { (exit 1); exit 1; }; }
-	fi
-	{ $as_echo "$as_me:$LINENO: result: yes, $XORG_MACROS_version" >&5
-$as_echo "yes, $XORG_MACROS_version" >&6; }
+
+
+
+
+
+
+
+
 
 
 # Set common system defines for POSIX extensions, such as _GNU_SOURCE
@@ -5310,13 +5298,13 @@ if test "${lt_cv_nm_interface+set}" = set; then
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:5313: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:5301: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:5316: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:5304: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:5319: output\"" >&5)
+  (eval echo "\"\$as_me:5307: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -6521,7 +6509,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 6524 "configure"' > conftest.$ac_ext
+  echo '#line 6512 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -7886,11 +7874,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7889: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7877: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7893: \$? = $ac_status" >&5
+   echo "$as_me:7881: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -8225,11 +8213,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8228: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8216: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8232: \$? = $ac_status" >&5
+   echo "$as_me:8220: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -8330,11 +8318,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8333: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8321: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8337: \$? = $ac_status" >&5
+   echo "$as_me:8325: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -8385,11 +8373,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8388: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8376: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8392: \$? = $ac_status" >&5
+   echo "$as_me:8380: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -11188,7 +11176,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11191 "configure"
+#line 11179 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11284,7 +11272,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11287 "configure"
+#line 11275 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12524,9 +12512,9 @@ if  test "x$GCC" = xyes ; then
     CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
 -Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
 -Wbad-function-cast"
-    case `gcc -dumpversion` in
+    case `$CC -dumpversion` in
     3.4.* | 4.*)
-	CWARNFLAGS+=" -Wold-style-definition -Wdeclaration-after-statement"
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
 	;;
     esac
 else
@@ -17542,7 +17530,7 @@ exec 6>&1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libX11 $as_me 1.2.2, which was
+This file was extended by libX11 $as_me 1.2.99.901, which was
 generated by GNU Autoconf 2.63.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -17605,7 +17593,7 @@ Report bugs to <bug-autoconf@gnu.org>."
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-libX11 config.status 1.2.2
+libX11 config.status 1.2.99.901
 configured by $0, generated by GNU Autoconf 2.63,
   with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
diff --git a/libX11/configure.ac b/libX11/configure.ac
index ab6d5a368..45e9d74ce 100644
--- a/libX11/configure.ac
+++ b/libX11/configure.ac
@@ -3,7 +3,7 @@
 
 AC_PREREQ(2.60)
 AC_INIT([libX11],
-        1.2.2,
+        1.2.99.901,
         [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
         libX11)
 AC_CONFIG_SRCDIR([Makefile.am])
diff --git a/libX11/include/X11/Xlib-xcb.h b/libX11/include/X11/Xlib-xcb.h
index b88e2e7a9..03d8f9867 100644
--- a/libX11/include/X11/Xlib-xcb.h
+++ b/libX11/include/X11/Xlib-xcb.h
@@ -6,10 +6,15 @@
 
 #include <xcb/xcb.h>
 #include <X11/Xlib.h>
+#include <X11/Xfuncproto.h>
+
+_XFUNCPROTOBEGIN
 
 xcb_connection_t *XGetXCBConnection(Display *dpy);
 
 enum XEventQueueOwner { XlibOwnsEventQueue = 0, XCBOwnsEventQueue };
 void XSetEventQueueOwner(Display *dpy, enum XEventQueueOwner owner);
 
+_XFUNCPROTOEND
+
 #endif /* XLIB_XCB_H */
diff --git a/libX11/include/X11/Xlib.h b/libX11/include/X11/Xlib.h
index 682988cf2..2c30bc09e 100644
--- a/libX11/include/X11/Xlib.h
+++ b/libX11/include/X11/Xlib.h
@@ -966,6 +966,17 @@ typedef struct
     int            evtype;       /* actual event type. */
     } XGenericEvent;
 
+typedef struct {
+    int            type;         /* of event. Always GenericEvent */
+    unsigned long  serial;       /* # of last request processed */
+    Bool           send_event;   /* true if from SendEvent request */
+    Display        *display;     /* Display the event was read from */
+    int            extension;    /* major opcode of extension that caused the event */
+    int            evtype;       /* actual event type. */
+    unsigned int   cookie;
+    void           *data;
+} XGenericEventCookie;
+
 /*
  * this union is defined so Xlib can always use the same sized
  * event structure internally, to avoid memory fragmentation.
@@ -1003,6 +1014,8 @@ typedef union _XEvent {
 	XMappingEvent xmapping;
 	XErrorEvent xerror;
 	XKeymapEvent xkeymap;
+	XGenericEvent xgeneric;
+	XGenericEventCookie xcookie;
 	long pad[24];
 } XEvent;
 #endif
@@ -3998,6 +4011,16 @@ extern int _Xwctomb(
     wchar_t			/* wc */
 );
 
+extern Bool XGetEventData(
+    Display*			/* dpy */,
+    XGenericEventCookie*	/* cookie*/
+);
+
+extern void XFreeEventData(
+    Display*			/* dpy */,
+    XGenericEventCookie*	/* cookie*/
+);
+
 _XFUNCPROTOEND
 
 #endif /* _XLIB_H_ */
diff --git a/libX11/include/X11/Xlibint.h b/libX11/include/X11/Xlibint.h
index 4f3755fae..2acfc7690 100644
--- a/libX11/include/X11/Xlibint.h
+++ b/libX11/include/X11/Xlibint.h
@@ -185,6 +185,20 @@ struct _XDisplay
 	struct _XkbInfoRec *xkb_info; /* XKB info */
 	struct _XtransConnInfo *trans_conn; /* transport connection object */
 	struct _X11XCBPrivate *xcb; /* XCB glue private data */
+
+	/* Generic event cookie handling */
+	unsigned int next_cookie; /* next event cookie */
+	/* vector for wire to generic event, index is (extension - 128) */
+	Bool (*generic_event_vec[128])(
+		Display *	/* dpy */,
+		XGenericEventCookie *	/* Xlib event */,
+		xEvent *	/* wire event */);
+	/* vector for event copy, index is (extension - 128) */
+	Bool (*generic_event_copy_vec[128])(
+		Display *	/* dpy */,
+		XGenericEventCookie *	/* in */,
+		XGenericEventCookie *   /* out*/);
+	void *cookiejar;  /* cookie events returned but not claimed */
 };
 
 #define XAllocIDs(dpy,ids,n) (*(dpy)->idlist_alloc)(dpy,ids,n)
@@ -1005,6 +1019,19 @@ extern Bool _XUnknownWireEvent(
     XEvent*	/* re */,
     xEvent*	/* event */
 );
+
+extern Bool _XUnknownWireEventCookie(
+    Display*	/* dpy */,
+    XGenericEventCookie*	/* re */,
+    xEvent*	/* event */
+);
+
+extern Bool _XUnknownCopyEventCookie(
+    Display*	/* dpy */,
+    XGenericEventCookie*	/* in */,
+    XGenericEventCookie*	/* out */
+);
+
 extern Status _XUnknownNativeEvent(
     Display*	/* dpy */,
     XEvent*	/* re */,
@@ -1157,6 +1184,31 @@ extern Bool (*XESetWireToEvent(
     Display*, XEvent*, xEvent*
 );
 
+extern Bool (*XESetWireToEventCookie(
+    Display*		/* display */,
+    int			/* extension */,
+    Bool (*) (
+	       Display*			/* display */,
+               XGenericEventCookie*	/* re */,
+               xEvent*			/* event */
+             )		/* proc */
+))(
+    Display*, XGenericEventCookie*, xEvent*
+);
+
+extern Bool (*XESetCopyEventCookie(
+    Display*		/* display */,
+    int			/* extension */,
+    Bool (*) (
+	       Display*			/* display */,
+               XGenericEventCookie*	/* in */,
+               XGenericEventCookie*	/* out */
+             )		/* proc */
+))(
+    Display*, XGenericEventCookie*, XGenericEventCookie*
+);
+
+
 extern Status (*XESetEventToWire(
     Display*		/* display */,
     int			/* event_number */,
@@ -1321,6 +1373,26 @@ int _XPutBackEvent (
     register Display *dpy,
     register XEvent *event);
 
+extern Bool _XIsEventCookie(
+        Display *dpy,
+        XEvent *ev);
+
+extern void _XFreeEventCookies(
+        Display *dpy);
+
+extern void _XStoreEventCookie(
+        Display *dpy,
+        XEvent *ev);
+
+extern Bool _XFetchEventCookie(
+        Display *dpy,
+        XGenericEventCookie *ev);
+
+extern Bool _XCopyEventCookie(
+        Display *dpy,
+        XGenericEventCookie *in,
+        XGenericEventCookie *out);
+
 _XFUNCPROTOEND
 
 #endif /* _XLIBINT_H_ */
diff --git a/libX11/man/Makefile.am b/libX11/man/Makefile.am
index b19c5d39a..b21d8fb9a 100644
--- a/libX11/man/Makefile.am
+++ b/libX11/man/Makefile.am
@@ -75,6 +75,7 @@ libman_PRE = \
 	XGravityEvent.man \
 	XrmGetFileDatabase.man \
 	XrmGetResource.man \
+	XGetEventData.man \
 	XGetVisualInfo.man \
 	XGetWindowAttributes.man \
 	XGetWindowProperty.man \
@@ -271,6 +272,7 @@ all_shadows =                                \
     $(XGraphicsExposeEvent_shadows)          \
     $(XrmGetFileDatabase_shadows)            \
     $(XrmGetResource_shadows)                \
+    $(XGetEventData_shadows)                 \
     $(XGetVisualInfo_shadows)                \
     $(XGetWindowAttributes_shadows)          \
     $(XGetWindowProperty_shadows)            \
@@ -658,6 +660,10 @@ XrmGetResource_shadows =                    \
     XrmQGetSearchList                       \
     XrmQGetSearchResource
 
+XGetEventData_shadows =                     \
+    XFreeEventData                          \
+    XGenericEventCookie
+
 XGetVisualInfo_shadows =                    \
     XMatchVisualInfo                        \
     XVisualIDFromVisual                     \
@@ -1223,6 +1229,9 @@ shadows.DONE:
 	(for i in $(XrmGetResource_shadows:=.@LIB_MAN_SUFFIX@) ; do \
 	 echo .so man$(LIB_MAN_DIR_SUFFIX)/XrmGetResource.$(LIB_MAN_SUFFIX) > $$i; \
 	 done)
+	(for i in $(XGetEventData_shadows:=.@LIB_MAN_SUFFIX@) ; do \
+	 echo .so man$(LIB_MAN_DIR_SUFFIX)/XGetEventData.$(LIB_MAN_SUFFIX) > $$i; \
+	 done)
 	(for i in $(XGetVisualInfo_shadows:=.@LIB_MAN_SUFFIX@) ; do \
 	 echo .so man$(LIB_MAN_DIR_SUFFIX)/XGetVisualInfo.$(LIB_MAN_SUFFIX) > $$i; \
 	 done)
diff --git a/libX11/man/Makefile.in b/libX11/man/Makefile.in
index effbc173e..64f44af7f 100644
--- a/libX11/man/Makefile.in
+++ b/libX11/man/Makefile.in
@@ -358,6 +358,7 @@ libman_PRE = \
 	XGravityEvent.man \
 	XrmGetFileDatabase.man \
 	XrmGetResource.man \
+	XGetEventData.man \
 	XGetVisualInfo.man \
 	XGetWindowAttributes.man \
 	XGetWindowProperty.man \
@@ -559,6 +560,7 @@ all_shadows = \
     $(XGraphicsExposeEvent_shadows)          \
     $(XrmGetFileDatabase_shadows)            \
     $(XrmGetResource_shadows)                \
+    $(XGetEventData_shadows)                 \
     $(XGetVisualInfo_shadows)                \
     $(XGetWindowAttributes_shadows)          \
     $(XGetWindowProperty_shadows)            \
@@ -945,6 +947,10 @@ XrmGetResource_shadows = \
     XrmQGetSearchList                       \
     XrmQGetSearchResource
 
+XGetEventData_shadows = \
+    XFreeEventData                          \
+    XGenericEventCookie
+
 XGetVisualInfo_shadows = \
     XMatchVisualInfo                        \
     XVisualIDFromVisual                     \
@@ -1894,6 +1900,9 @@ shadows.DONE:
 	(for i in $(XrmGetResource_shadows:=.@LIB_MAN_SUFFIX@) ; do \
 	 echo .so man$(LIB_MAN_DIR_SUFFIX)/XrmGetResource.$(LIB_MAN_SUFFIX) > $$i; \
 	 done)
+	(for i in $(XGetEventData_shadows:=.@LIB_MAN_SUFFIX@) ; do \
+	 echo .so man$(LIB_MAN_DIR_SUFFIX)/XGetEventData.$(LIB_MAN_SUFFIX) > $$i; \
+	 done)
 	(for i in $(XGetVisualInfo_shadows:=.@LIB_MAN_SUFFIX@) ; do \
 	 echo .so man$(LIB_MAN_DIR_SUFFIX)/XGetVisualInfo.$(LIB_MAN_SUFFIX) > $$i; \
 	 done)
diff --git a/libX11/man/XGetEventData.man b/libX11/man/XGetEventData.man
new file mode 100644
index 000000000..10008edc4
--- /dev/null
+++ b/libX11/man/XGetEventData.man
@@ -0,0 +1,223 @@
+.\" Copyright \(co 2009 Red Hat, Inc.
+.\"
+.\" Permission is hereby granted, free of charge, to any person obtaining a
+.\" copy of this software and associated documentation files (the "Software"),
+.\" to deal in the Software without restriction, including without limitation
+.\" the rights to use, copy, modify, merge, publish, distribute, sublicense,
+.\" and/or sell copies of the Software, and to permit persons to whom the
+.\" Software is furnished to do so, subject to the following conditions:
+.\"
+.\" The above copyright notice and this permission notice (including the next
+.\" paragraph) shall be included in all copies or substantial portions of the
+.\" Software.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+.\" THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+.\" LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+.\" FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+.\" DEALINGS IN THE SOFTWARE.
+.\"
+.ds xT X Toolkit Intrinsics \- C Language Interface
+.ds xW Athena X Widgets \- C Language X Toolkit Interface
+.ds xL Xlib \- C Language X Interface
+.ds xC Inter-Client Communication Conventions Manual
+.na
+.de Ds
+.nf
+.\\$1D \\$2 \\$1
+.ft 1
+.\".ps \\n(PS
+.\".if \\n(VS>=40 .vs \\n(VSu
+.\".if \\n(VS<=39 .vs \\n(VSp
+..
+.de De
+.ce 0
+.if \\n(BD .DF
+.nr BD 0
+.in \\n(OIu
+.if \\n(TM .ls 2
+.sp \\n(DDu
+.fi
+..
+.de FD
+.LP
+.KS
+.TA .5i 3i
+.ta .5i 3i
+.nf
+..
+.de FN
+.fi
+.KE
+.LP
+..
+.de IN		\" send an index entry to the stderr
+..
+.de C{
+.KS
+.nf
+.D
+.\"
+.\"	choose appropriate monospace font
+.\"	the imagen conditional, 480,
+.\"	may be changed to L if LB is too
+.\"	heavy for your eyes...
+.\"
+.ie "\\*(.T"480" .ft L
+.el .ie "\\*(.T"300" .ft L
+.el .ie "\\*(.T"202" .ft PO
+.el .ie "\\*(.T"aps" .ft CW
+.el .ft R
+.ps \\n(PS
+.ie \\n(VS>40 .vs \\n(VSu
+.el .vs \\n(VSp
+..
+.de C}
+.DE
+.R
+..
+.de Pn
+.ie t \\$1\fB\^\\$2\^\fR\\$3
+.el \\$1\fI\^\\$2\^\fP\\$3
+..
+.de ZN
+.ie t \fB\^\\$1\^\fR\\$2
+.el \fI\^\\$1\^\fP\\$2
+..
+.de hN
+.ie t <\fB\\$1\fR>\\$2
+.el <\fI\\$1\fP>\\$2
+..
+.de NT
+.ne 7
+.ds NO Note
+.if \\n(.$>$1 .if !'\\$2'C' .ds NO \\$2
+.if \\n(.$ .if !'\\$1'C' .ds NO \\$1
+.ie n .sp
+.el .sp 10p
+.TB
+.ce
+\\*(NO
+.ie n .sp
+.el .sp 5p
+.if '\\$1'C' .ce 99
+.if '\\$2'C' .ce 99
+.in +5n
+.ll -5n
+.R
+..
+.		\" Note End -- doug kraft 3/85
+.de NE
+.ce 0
+.in -5n
+.ll +5n
+.ie n .sp
+.el .sp 10p
+..
+.ny0
+.TH XGetEventData __libmansuffix__ __xorgversion__ "XLIB FUNCTIONS"
+.SH NAME
+XGetEventData, XFreeEventData, XGenericEventCookie \- retrieve and free additional event data through cookies.
+.SH SYNTAX
+.HP
+Bool XGetEventData\^(\^Display *\fIdisplay\fP\^, XGenericEventCookie *\fIcookie\fP\^);
+.HP
+void XFreeEventData\^(\^Display *\fIdisplay\fP\^, XGenericEventCookie *\fIcookie\fP\^);
+.HP
+.SH ARGUMENTS
+.IP \fIdisplay\fP 1i
+Specifies the connection to the X server.
+.IP \fIcookie\fP 1i
+Specifies the cookie to free or retrieve the data for.
+
+.SH STRUCTURES
+.Ds 0
+.TA .5i 3i
+.ta .5i 3i
+typedef struct {
+	int type;
+	unsigned long serial;
+	Bool send_event;
+	Display *display;
+	int extension;
+	int evtype;
+	unsigned int cookie;
+	void *data;
+} XGenericEventCookie;
+.De
+
+.SH DESCRIPTION
+Some extension
+.ZN XGenericEvents
+require additional memory to store information.
+For these events, the library returns a
+.ZN XGenericEventCookie
+with a token ('cookie') unique to this event. The
+.ZN XGenericEventCookie 's
+data pointer is undefined until
+.ZN XGetEventData
+is called.
+
+The
+.ZN XGetEventData
+function retrieves this extra data for the given cookie. No round-trip to
+the server is required. If the cookie is invalid or the
+event is not an event handled by cookie handlers,
+.ZN False
+is returned. If
+.ZN XGetEventData
+returns
+.ZN True ,
+the cookie's data pointer points to the memory containing the event
+information. A client must call
+.ZN XFreeEventData
+to free this memory.
+.ZN XGetEventData
+returns
+.ZN False
+for multiple calls for the same event cookie.
+
+The
+.ZN XFreeEventData
+function frees the data associated with a cookie. A client must call
+.ZN XFreeEventData
+for each cookie claimed with
+.ZN XGetEventData .
+
+.SH EXAMPLE CODE
+.Ds 0
+.TA .5i 3i
+.ta .5i 3i
+XEvent event;
+XGenericEventCookie *cookie = &ev;
+
+XNextEvent(display, &event);
+if (XGetEventData(display, cookie)) {
+    handle_cookie_event(cookie->data);
+} else
+    handle_event(&event);
+}
+XFreeEventData(display, cookie);
+.De
+
+.SH NOTES
+A cookie is defined as unclaimed if it has been returned to the client
+through
+.ZN XNextEvent
+but its data has not been retrieved via
+.ZN XGetEventData .
+Subsequent calls to
+.ZN XNextEvent
+may free memory associated with unclaimed cookies.
+Multi-threaded X clients must ensure that
+.ZN XGetEventData
+is called before the next call to
+.ZN XNextEvent .
+
+.SH "SEE ALSO"
+XNextEvent(3X11),
+.br
+\fI\*(xL\fP
+
diff --git a/libX11/nls/en_US.UTF-8/Compose.pre b/libX11/nls/en_US.UTF-8/Compose.pre
index 26084b906..a4174bbe3 100644
--- a/libX11/nls/en_US.UTF-8/Compose.pre
+++ b/libX11/nls/en_US.UTF-8/Compose.pre
@@ -4150,6 +4150,8 @@ XCOMM Part 3
 <Multi_key> <KP_Divide> <rightarrow> 	: "↛"   U219B # RIGHTWARDS ARROW WITH STROKE
 <Multi_key> <slash> <U2194>  	: "↮"   U21AE # LEFT RIGHT ARROW WITH STROKE
 <Multi_key> <KP_Divide> <U2194> 	: "↮"   U21AE # LEFT RIGHT ARROW WITH STROKE
+<Multi_key> <less> <minus> 	: "←" U2190 # LEFTWARDS ARROW
+<Multi_key> <minus> <greater> 	: "→" U2192 # RIGHTWARDS ARROW
 <Multi_key> <U2203> <U0338> 	: "∄"   U2204 # THERE DOES NOT EXIST
 <Multi_key> <U2208> <U0338> 	: "∉"   U2209 # NOT AN ELEMENT OF
 <Multi_key> <U220B> <U0338> 	: "∌"   U220C # DOES NOT CONTAIN AS MEMBER
diff --git a/libX11/src/ChkIfEv.c b/libX11/src/ChkIfEv.c
index 9bef64f89..66f0c3c98 100644
--- a/libX11/src/ChkIfEv.c
+++ b/libX11/src/ChkIfEv.c
@@ -62,6 +62,7 @@ Bool XCheckIfEvent (
 		   && (*predicate)(dpy, &qelt->event, arg)) {
 		    *event = qelt->event;
 		    _XDeq(dpy, prev, qelt);
+		    _XStoreEventCookie(dpy, event);
 		    UnlockDisplay(dpy);
 		    return True;
 		}
diff --git a/libX11/src/ChkMaskEv.c b/libX11/src/ChkMaskEv.c
index bc1a279f1..6fb71c9e0 100644
--- a/libX11/src/ChkMaskEv.c
+++ b/libX11/src/ChkMaskEv.c
@@ -54,6 +54,10 @@ Bool XCheckMaskEvent (
 	int n;			/* time through count */
 
         LockDisplay(dpy);
+
+	/* Delete unclaimed cookies */
+	_XFreeEventCookies(dpy);
+
 	prev = NULL;
 	for (n = 3; --n >= 0;) {
 	    for (qelt = prev ? prev->next : dpy->head;
diff --git a/libX11/src/ChkTypEv.c b/libX11/src/ChkTypEv.c
index fc4c7d187..f64ebd335 100644
--- a/libX11/src/ChkTypEv.c
+++ b/libX11/src/ChkTypEv.c
@@ -48,6 +48,10 @@ Bool XCheckTypedEvent (
 	int n;			/* time through count */
 
         LockDisplay(dpy);
+
+	/* Delete unclaimed cookies */
+	_XFreeEventCookies(dpy);
+
 	prev = NULL;
 	for (n = 3; --n >= 0;) {
 	    for (qelt = prev ? prev->next : dpy->head;
diff --git a/libX11/src/ChkTypWEv.c b/libX11/src/ChkTypWEv.c
index 6214c3654..d791eb255 100644
--- a/libX11/src/ChkTypWEv.c
+++ b/libX11/src/ChkTypWEv.c
@@ -49,6 +49,10 @@ Bool XCheckTypedWindowEvent (
 	int n;			/* time through count */
 
         LockDisplay(dpy);
+
+	/* Delete unclaimed cookies */
+	_XFreeEventCookies(dpy);
+
 	prev = NULL;
 	for (n = 3; --n >= 0;) {
 	    for (qelt = prev ? prev->next : dpy->head;
diff --git a/libX11/src/ChkWinEv.c b/libX11/src/ChkWinEv.c
index 1fd975cda..b753c5fd8 100644
--- a/libX11/src/ChkWinEv.c
+++ b/libX11/src/ChkWinEv.c
@@ -54,6 +54,10 @@ Bool XCheckWindowEvent (
 	int n;			/* time through count */
 
         LockDisplay(dpy);
+
+	/* Delete unclaimed cookies */
+	_XFreeEventCookies(dpy);
+
 	prev = NULL;
 	for (n = 3; --n >= 0;) {
 	    for (qelt = prev ? prev->next : dpy->head;
diff --git a/libX11/src/FreeEventData.c b/libX11/src/FreeEventData.c
new file mode 100644
index 000000000..e2d40b0db
--- /dev/null
+++ b/libX11/src/FreeEventData.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright © 2009 Red Hat, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include "Xlibint.h"
+
+void
+XFreeEventData(Display *dpy, XGenericEventCookie *event)
+{
+
+    if (_XIsEventCookie(dpy, (XEvent*)event) && event->data)
+    {
+        XFree(event->data);
+        event->data = NULL;
+        event->cookie = 0;
+    }
+    return;
+}
+
diff --git a/libX11/src/GetEventData.c b/libX11/src/GetEventData.c
new file mode 100644
index 000000000..b93dee6cd
--- /dev/null
+++ b/libX11/src/GetEventData.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright © 2009 Red Hat, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include "Xlibint.h"
+
+Bool
+XGetEventData(Display *dpy, XGenericEventCookie *event)
+{
+    Bool rc;
+    LockDisplay(dpy);
+
+    rc = _XFetchEventCookie(dpy, event);
+
+    UnlockDisplay(dpy);
+
+    return rc;
+}
+
diff --git a/libX11/src/IfEvent.c b/libX11/src/IfEvent.c
index 05a2b82cb..64c8f465b 100644
--- a/libX11/src/IfEvent.c
+++ b/libX11/src/IfEvent.c
@@ -61,6 +61,7 @@ XIfEvent (
 		   && (*predicate)(dpy, &qelt->event, arg)) {
 		    *event = qelt->event;
 		    _XDeq(dpy, prev, qelt);
+		    _XStoreEventCookie(dpy, event);
 		    UnlockDisplay(dpy);
 		    return 0;
 		}
diff --git a/libX11/src/InitExt.c b/libX11/src/InitExt.c
index 92fc44afa..0e6c94ee6 100644
--- a/libX11/src/InitExt.c
+++ b/libX11/src/InitExt.c
@@ -253,6 +253,49 @@ WireToEventType XESetWireToEvent(
 	return (WireToEventType)oldproc;
 }
 
+typedef Bool (*WireToEventCookieType) (
+    Display*	/* display */,
+    XGenericEventCookie*	/* re */,
+    xEvent*	/* event */
+);
+
+WireToEventCookieType XESetWireToEventCookie(
+    Display *dpy,       /* display */
+    int extension,      /* extension major opcode */
+    WireToEventCookieType proc /* routine to call for generic events */
+    )
+{
+	WireToEventCookieType oldproc;
+	if (proc == NULL) proc = (WireToEventCookieType)_XUnknownWireEventCookie;
+	LockDisplay (dpy);
+	oldproc = dpy->generic_event_vec[extension & 0x7F];
+	dpy->generic_event_vec[extension & 0x7F] = proc;
+	UnlockDisplay (dpy);
+	return (WireToEventCookieType)oldproc;
+}
+
+typedef Bool (*CopyEventCookieType) (
+    Display*	/* display */,
+    XGenericEventCookie*	/* in */,
+    XGenericEventCookie*	/* out */
+);
+
+CopyEventCookieType XESetCopyEventCookie(
+    Display *dpy,       /* display */
+    int extension,      /* extension major opcode */
+    CopyEventCookieType proc /* routine to copy generic events */
+    )
+{
+	CopyEventCookieType oldproc;
+	if (proc == NULL) proc = (CopyEventCookieType)_XUnknownCopyEventCookie;
+	LockDisplay (dpy);
+	oldproc = dpy->generic_event_copy_vec[extension & 0x7F];
+	dpy->generic_event_copy_vec[extension & 0x7F] = proc;
+	UnlockDisplay (dpy);
+	return (CopyEventCookieType)oldproc;
+}
+
+
 typedef Status (*EventToWireType) (
     Display*	/* display */,
     XEvent*	/* re */,
diff --git a/libX11/src/Makefile.am b/libX11/src/Makefile.am
index 86a846e41..26d8e277f 100644
--- a/libX11/src/Makefile.am
+++ b/libX11/src/Makefile.am
@@ -130,6 +130,7 @@ libX11_la_SOURCES = \
                   FreeCols.c \
                   FreeCurs.c \
                   FreeEData.c \
+                  FreeEventData.c \
                   FreeGC.c \
                   FreePix.c \
                   FSSaver.c \
@@ -139,6 +140,7 @@ libX11_la_SOURCES = \
                   GetAtomNm.c \
                   GetColor.c \
                   GetDflt.c \
+                  GetEventData.c \
                   GetFPath.c \
                   GetFProp.c \
                   GetGCVals.c \
@@ -297,6 +299,7 @@ libX11_la_SOURCES = \
                   UnldFont.c \
                   UnmapSubs.c \
                   UnmapWin.c \
+                  utlist.h \
                   VisUtil.c \
                   WarpPtr.c \
                   Window.c \
@@ -373,7 +376,7 @@ if XKB
 USE_XKB_LIBS = $(XKB_LIBS)
 endif
 
-libX11_la_LDFLAGS = -version-number 6:2:0 -no-undefined
+libX11_la_LDFLAGS = -version-number 6:3:0 -no-undefined
 
 libX11_la_LIBADD = \
 	$(USE_I18N_LIBS) \
diff --git a/libX11/src/Makefile.in b/libX11/src/Makefile.in
index ef4df0a71..1d377c9e0 100644
--- a/libX11/src/Makefile.in
+++ b/libX11/src/Makefile.in
@@ -114,43 +114,43 @@ am__libX11_la_SOURCES_DIST = AllCells.c AllowEv.c AllPlanes.c \
 	DrRects.c DrSegs.c ErrDes.c ErrHndlr.c evtomask.c EvToWire.c \
 	FetchName.c FillArc.c FillArcs.c FillPoly.c FillRct.c \
 	FillRcts.c FilterEv.c Flush.c Font.c FontInfo.c FontNames.c \
-	FreeCmap.c FreeCols.c FreeCurs.c FreeEData.c FreeGC.c \
-	FreePix.c FSSaver.c FSWrap.c GCMisc.c Geom.c GetAtomNm.c \
-	GetColor.c GetDflt.c GetFPath.c GetFProp.c GetGCVals.c \
-	GetGeom.c GetHColor.c GetHints.c GetIFocus.c GetImage.c \
-	GetKCnt.c GetMoEv.c GetNrmHint.c GetPCnt.c GetPntMap.c \
-	GetProp.c GetRGBCMap.c GetSOwner.c GetSSaver.c GetStCmap.c \
-	GetTxtProp.c GetWAttrs.c GetWMCMapW.c GetWMProto.c globals.c \
-	GrButton.c GrKeybd.c GrKey.c GrPointer.c GrServer.c Host.c \
-	Iconify.c IfEvent.c imConv.c ImText16.c ImText.c ImUtil.c \
-	InitExt.c InsCmap.c IntAtom.c KeyBind.c Key.h KeysymStr.c \
-	KillCl.c LiHosts.c LiICmaps.c LiProps.c ListExt.c LoadFont.c \
-	LockDis.c locking.c locking.h LookupCol.c LowerWin.c Macros.c \
-	MapRaised.c MapSubs.c MapWindow.c MaskEvent.c Misc.c ModMap.c \
-	MoveWin.c NextEvent.c OCWrap.c OMWrap.c OpenDis.c ParseCmd.c \
-	ParseCol.c ParseGeom.c PeekEvent.c PeekIfEv.c Pending.c \
-	PixFormats.c PmapBgnd.c PmapBord.c poly.h PolyReg.c \
-	PolyTxt16.c PolyTxt.c PropAlloc.c PutBEvent.c PutImage.c \
-	Quarks.c QuBest.c QuColor.c QuColors.c QuCurShp.c QuExt.c \
-	QuKeybd.c QuPntr.c QuStipShp.c QuTextE16.c QuTextExt.c \
-	QuTileShp.c QuTree.c RaiseWin.c RdBitF.c RecolorC.c \
-	ReconfWin.c ReconfWM.c Region.c RegstFlt.c RepWindow.c \
-	RestackWs.c RotProp.c ScrResStr.c SelInput.c SendEvent.c \
-	SetBack.c SetClMask.c SetClOrig.c SetCRects.c SetDashes.c \
-	SetFont.c SetFore.c SetFPath.c SetFunc.c SetHints.c \
-	SetIFocus.c SetLocale.c SetLStyle.c SetNrmHint.c SetPMask.c \
-	SetPntMap.c SetRGBCMap.c SetSOwner.c SetSSaver.c SetState.c \
-	SetStCmap.c SetStip.c SetTile.c SetTSOrig.c SetTxtProp.c \
-	SetWMCMapW.c SetWMProto.c StBytes.c StColor.c StColors.c \
-	StName.c StNColor.c StrKeysym.c StrToText.c Sync.c Synchro.c \
-	Text16.c Text.c TextExt16.c TextExt.c TextToStr.c TrCoords.c \
-	UndefCurs.c UngrabBut.c UngrabKbd.c UngrabKey.c UngrabPtr.c \
-	UngrabSvr.c UninsCmap.c UnldFont.c UnmapSubs.c UnmapWin.c \
-	VisUtil.c WarpPtr.c Window.c WinEvent.c Withdraw.c WMGeom.c \
-	WMProps.c WrBitF.c Xatomtype.h Xintatom.h Xintconn.h \
-	XlibAsync.c XlibInt.c Xprivate.h XomGeneric.h Xresinternal.h \
-	Xrm.c XrmI.h os2Stubs.c udcInf.c UIThrStubs.c xcb_disp.c \
-	xcb_io.c Xxcbint.h ConnDis.c x11_trans.c
+	FreeCmap.c FreeCols.c FreeCurs.c FreeEData.c FreeEventData.c \
+	FreeGC.c FreePix.c FSSaver.c FSWrap.c GCMisc.c Geom.c \
+	GetAtomNm.c GetColor.c GetDflt.c GetEventData.c GetFPath.c \
+	GetFProp.c GetGCVals.c GetGeom.c GetHColor.c GetHints.c \
+	GetIFocus.c GetImage.c GetKCnt.c GetMoEv.c GetNrmHint.c \
+	GetPCnt.c GetPntMap.c GetProp.c GetRGBCMap.c GetSOwner.c \
+	GetSSaver.c GetStCmap.c GetTxtProp.c GetWAttrs.c GetWMCMapW.c \
+	GetWMProto.c globals.c GrButton.c GrKeybd.c GrKey.c \
+	GrPointer.c GrServer.c Host.c Iconify.c IfEvent.c imConv.c \
+	ImText16.c ImText.c ImUtil.c InitExt.c InsCmap.c IntAtom.c \
+	KeyBind.c Key.h KeysymStr.c KillCl.c LiHosts.c LiICmaps.c \
+	LiProps.c ListExt.c LoadFont.c LockDis.c locking.c locking.h \
+	LookupCol.c LowerWin.c Macros.c MapRaised.c MapSubs.c \
+	MapWindow.c MaskEvent.c Misc.c ModMap.c MoveWin.c NextEvent.c \
+	OCWrap.c OMWrap.c OpenDis.c ParseCmd.c ParseCol.c ParseGeom.c \
+	PeekEvent.c PeekIfEv.c Pending.c PixFormats.c PmapBgnd.c \
+	PmapBord.c poly.h PolyReg.c PolyTxt16.c PolyTxt.c PropAlloc.c \
+	PutBEvent.c PutImage.c Quarks.c QuBest.c QuColor.c QuColors.c \
+	QuCurShp.c QuExt.c QuKeybd.c QuPntr.c QuStipShp.c QuTextE16.c \
+	QuTextExt.c QuTileShp.c QuTree.c RaiseWin.c RdBitF.c \
+	RecolorC.c ReconfWin.c ReconfWM.c Region.c RegstFlt.c \
+	RepWindow.c RestackWs.c RotProp.c ScrResStr.c SelInput.c \
+	SendEvent.c SetBack.c SetClMask.c SetClOrig.c SetCRects.c \
+	SetDashes.c SetFont.c SetFore.c SetFPath.c SetFunc.c \
+	SetHints.c SetIFocus.c SetLocale.c SetLStyle.c SetNrmHint.c \
+	SetPMask.c SetPntMap.c SetRGBCMap.c SetSOwner.c SetSSaver.c \
+	SetState.c SetStCmap.c SetStip.c SetTile.c SetTSOrig.c \
+	SetTxtProp.c SetWMCMapW.c SetWMProto.c StBytes.c StColor.c \
+	StColors.c StName.c StNColor.c StrKeysym.c StrToText.c Sync.c \
+	Synchro.c Text16.c Text.c TextExt16.c TextExt.c TextToStr.c \
+	TrCoords.c UndefCurs.c UngrabBut.c UngrabKbd.c UngrabKey.c \
+	UngrabPtr.c UngrabSvr.c UninsCmap.c UnldFont.c UnmapSubs.c \
+	UnmapWin.c utlist.h VisUtil.c WarpPtr.c Window.c WinEvent.c \
+	Withdraw.c WMGeom.c WMProps.c WrBitF.c Xatomtype.h Xintatom.h \
+	Xintconn.h XlibAsync.c XlibInt.c Xprivate.h XomGeneric.h \
+	Xresinternal.h Xrm.c XrmI.h os2Stubs.c udcInf.c UIThrStubs.c \
+	xcb_disp.c xcb_io.c Xxcbint.h ConnDis.c x11_trans.c
 @OS2_TRUE@am__objects_1 = os2Stubs.lo
 @UDC_TRUE@am__objects_2 = udcInf.lo
 @THRSTUBS_TRUE@am__objects_3 = UIThrStubs.lo
@@ -172,44 +172,45 @@ am_libX11_la_OBJECTS = AllCells.lo AllowEv.lo AllPlanes.lo AutoRep.lo \
 	EvToWire.lo FetchName.lo FillArc.lo FillArcs.lo FillPoly.lo \
 	FillRct.lo FillRcts.lo FilterEv.lo Flush.lo Font.lo \
 	FontInfo.lo FontNames.lo FreeCmap.lo FreeCols.lo FreeCurs.lo \
-	FreeEData.lo FreeGC.lo FreePix.lo FSSaver.lo FSWrap.lo \
-	GCMisc.lo Geom.lo GetAtomNm.lo GetColor.lo GetDflt.lo \
-	GetFPath.lo GetFProp.lo GetGCVals.lo GetGeom.lo GetHColor.lo \
-	GetHints.lo GetIFocus.lo GetImage.lo GetKCnt.lo GetMoEv.lo \
-	GetNrmHint.lo GetPCnt.lo GetPntMap.lo GetProp.lo GetRGBCMap.lo \
-	GetSOwner.lo GetSSaver.lo GetStCmap.lo GetTxtProp.lo \
-	GetWAttrs.lo GetWMCMapW.lo GetWMProto.lo globals.lo \
-	GrButton.lo GrKeybd.lo GrKey.lo GrPointer.lo GrServer.lo \
-	Host.lo Iconify.lo IfEvent.lo imConv.lo ImText16.lo ImText.lo \
-	ImUtil.lo InitExt.lo InsCmap.lo IntAtom.lo KeyBind.lo \
-	KeysymStr.lo KillCl.lo LiHosts.lo LiICmaps.lo LiProps.lo \
-	ListExt.lo LoadFont.lo LockDis.lo locking.lo LookupCol.lo \
-	LowerWin.lo Macros.lo MapRaised.lo MapSubs.lo MapWindow.lo \
-	MaskEvent.lo Misc.lo ModMap.lo MoveWin.lo NextEvent.lo \
-	OCWrap.lo OMWrap.lo OpenDis.lo ParseCmd.lo ParseCol.lo \
-	ParseGeom.lo PeekEvent.lo PeekIfEv.lo Pending.lo PixFormats.lo \
-	PmapBgnd.lo PmapBord.lo PolyReg.lo PolyTxt16.lo PolyTxt.lo \
-	PropAlloc.lo PutBEvent.lo PutImage.lo Quarks.lo QuBest.lo \
-	QuColor.lo QuColors.lo QuCurShp.lo QuExt.lo QuKeybd.lo \
-	QuPntr.lo QuStipShp.lo QuTextE16.lo QuTextExt.lo QuTileShp.lo \
-	QuTree.lo RaiseWin.lo RdBitF.lo RecolorC.lo ReconfWin.lo \
-	ReconfWM.lo Region.lo RegstFlt.lo RepWindow.lo RestackWs.lo \
-	RotProp.lo ScrResStr.lo SelInput.lo SendEvent.lo SetBack.lo \
-	SetClMask.lo SetClOrig.lo SetCRects.lo SetDashes.lo SetFont.lo \
-	SetFore.lo SetFPath.lo SetFunc.lo SetHints.lo SetIFocus.lo \
-	SetLocale.lo SetLStyle.lo SetNrmHint.lo SetPMask.lo \
-	SetPntMap.lo SetRGBCMap.lo SetSOwner.lo SetSSaver.lo \
-	SetState.lo SetStCmap.lo SetStip.lo SetTile.lo SetTSOrig.lo \
-	SetTxtProp.lo SetWMCMapW.lo SetWMProto.lo StBytes.lo \
-	StColor.lo StColors.lo StName.lo StNColor.lo StrKeysym.lo \
-	StrToText.lo Sync.lo Synchro.lo Text16.lo Text.lo TextExt16.lo \
-	TextExt.lo TextToStr.lo TrCoords.lo UndefCurs.lo UngrabBut.lo \
-	UngrabKbd.lo UngrabKey.lo UngrabPtr.lo UngrabSvr.lo \
-	UninsCmap.lo UnldFont.lo UnmapSubs.lo UnmapWin.lo VisUtil.lo \
-	WarpPtr.lo Window.lo WinEvent.lo Withdraw.lo WMGeom.lo \
-	WMProps.lo WrBitF.lo XlibAsync.lo XlibInt.lo Xrm.lo \
-	$(am__objects_1) $(am__objects_2) $(am__objects_3) \
-	$(am__objects_4) $(am__objects_5)
+	FreeEData.lo FreeEventData.lo FreeGC.lo FreePix.lo FSSaver.lo \
+	FSWrap.lo GCMisc.lo Geom.lo GetAtomNm.lo GetColor.lo \
+	GetDflt.lo GetEventData.lo GetFPath.lo GetFProp.lo \
+	GetGCVals.lo GetGeom.lo GetHColor.lo GetHints.lo GetIFocus.lo \
+	GetImage.lo GetKCnt.lo GetMoEv.lo GetNrmHint.lo GetPCnt.lo \
+	GetPntMap.lo GetProp.lo GetRGBCMap.lo GetSOwner.lo \
+	GetSSaver.lo GetStCmap.lo GetTxtProp.lo GetWAttrs.lo \
+	GetWMCMapW.lo GetWMProto.lo globals.lo GrButton.lo GrKeybd.lo \
+	GrKey.lo GrPointer.lo GrServer.lo Host.lo Iconify.lo \
+	IfEvent.lo imConv.lo ImText16.lo ImText.lo ImUtil.lo \
+	InitExt.lo InsCmap.lo IntAtom.lo KeyBind.lo KeysymStr.lo \
+	KillCl.lo LiHosts.lo LiICmaps.lo LiProps.lo ListExt.lo \
+	LoadFont.lo LockDis.lo locking.lo LookupCol.lo LowerWin.lo \
+	Macros.lo MapRaised.lo MapSubs.lo MapWindow.lo MaskEvent.lo \
+	Misc.lo ModMap.lo MoveWin.lo NextEvent.lo OCWrap.lo OMWrap.lo \
+	OpenDis.lo ParseCmd.lo ParseCol.lo ParseGeom.lo PeekEvent.lo \
+	PeekIfEv.lo Pending.lo PixFormats.lo PmapBgnd.lo PmapBord.lo \
+	PolyReg.lo PolyTxt16.lo PolyTxt.lo PropAlloc.lo PutBEvent.lo \
+	PutImage.lo Quarks.lo QuBest.lo QuColor.lo QuColors.lo \
+	QuCurShp.lo QuExt.lo QuKeybd.lo QuPntr.lo QuStipShp.lo \
+	QuTextE16.lo QuTextExt.lo QuTileShp.lo QuTree.lo RaiseWin.lo \
+	RdBitF.lo RecolorC.lo ReconfWin.lo ReconfWM.lo Region.lo \
+	RegstFlt.lo RepWindow.lo RestackWs.lo RotProp.lo ScrResStr.lo \
+	SelInput.lo SendEvent.lo SetBack.lo SetClMask.lo SetClOrig.lo \
+	SetCRects.lo SetDashes.lo SetFont.lo SetFore.lo SetFPath.lo \
+	SetFunc.lo SetHints.lo SetIFocus.lo SetLocale.lo SetLStyle.lo \
+	SetNrmHint.lo SetPMask.lo SetPntMap.lo SetRGBCMap.lo \
+	SetSOwner.lo SetSSaver.lo SetState.lo SetStCmap.lo SetStip.lo \
+	SetTile.lo SetTSOrig.lo SetTxtProp.lo SetWMCMapW.lo \
+	SetWMProto.lo StBytes.lo StColor.lo StColors.lo StName.lo \
+	StNColor.lo StrKeysym.lo StrToText.lo Sync.lo Synchro.lo \
+	Text16.lo Text.lo TextExt16.lo TextExt.lo TextToStr.lo \
+	TrCoords.lo UndefCurs.lo UngrabBut.lo UngrabKbd.lo \
+	UngrabKey.lo UngrabPtr.lo UngrabSvr.lo UninsCmap.lo \
+	UnldFont.lo UnmapSubs.lo UnmapWin.lo VisUtil.lo WarpPtr.lo \
+	Window.lo WinEvent.lo Withdraw.lo WMGeom.lo WMProps.lo \
+	WrBitF.lo XlibAsync.lo XlibInt.lo Xrm.lo $(am__objects_1) \
+	$(am__objects_2) $(am__objects_3) $(am__objects_4) \
+	$(am__objects_5)
 libX11_la_OBJECTS = $(am_libX11_la_OBJECTS)
 libX11_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
@@ -498,43 +499,43 @@ libX11_la_SOURCES = AllCells.c AllowEv.c AllPlanes.c AutoRep.c \
 	DrRects.c DrSegs.c ErrDes.c ErrHndlr.c evtomask.c EvToWire.c \
 	FetchName.c FillArc.c FillArcs.c FillPoly.c FillRct.c \
 	FillRcts.c FilterEv.c Flush.c Font.c FontInfo.c FontNames.c \
-	FreeCmap.c FreeCols.c FreeCurs.c FreeEData.c FreeGC.c \
-	FreePix.c FSSaver.c FSWrap.c GCMisc.c Geom.c GetAtomNm.c \
-	GetColor.c GetDflt.c GetFPath.c GetFProp.c GetGCVals.c \
-	GetGeom.c GetHColor.c GetHints.c GetIFocus.c GetImage.c \
-	GetKCnt.c GetMoEv.c GetNrmHint.c GetPCnt.c GetPntMap.c \
-	GetProp.c GetRGBCMap.c GetSOwner.c GetSSaver.c GetStCmap.c \
-	GetTxtProp.c GetWAttrs.c GetWMCMapW.c GetWMProto.c globals.c \
-	GrButton.c GrKeybd.c GrKey.c GrPointer.c GrServer.c Host.c \
-	Iconify.c IfEvent.c imConv.c ImText16.c ImText.c ImUtil.c \
-	InitExt.c InsCmap.c IntAtom.c KeyBind.c Key.h KeysymStr.c \
-	KillCl.c LiHosts.c LiICmaps.c LiProps.c ListExt.c LoadFont.c \
-	LockDis.c locking.c locking.h LookupCol.c LowerWin.c Macros.c \
-	MapRaised.c MapSubs.c MapWindow.c MaskEvent.c Misc.c ModMap.c \
-	MoveWin.c NextEvent.c OCWrap.c OMWrap.c OpenDis.c ParseCmd.c \
-	ParseCol.c ParseGeom.c PeekEvent.c PeekIfEv.c Pending.c \
-	PixFormats.c PmapBgnd.c PmapBord.c poly.h PolyReg.c \
-	PolyTxt16.c PolyTxt.c PropAlloc.c PutBEvent.c PutImage.c \
-	Quarks.c QuBest.c QuColor.c QuColors.c QuCurShp.c QuExt.c \
-	QuKeybd.c QuPntr.c QuStipShp.c QuTextE16.c QuTextExt.c \
-	QuTileShp.c QuTree.c RaiseWin.c RdBitF.c RecolorC.c \
-	ReconfWin.c ReconfWM.c Region.c RegstFlt.c RepWindow.c \
-	RestackWs.c RotProp.c ScrResStr.c SelInput.c SendEvent.c \
-	SetBack.c SetClMask.c SetClOrig.c SetCRects.c SetDashes.c \
-	SetFont.c SetFore.c SetFPath.c SetFunc.c SetHints.c \
-	SetIFocus.c SetLocale.c SetLStyle.c SetNrmHint.c SetPMask.c \
-	SetPntMap.c SetRGBCMap.c SetSOwner.c SetSSaver.c SetState.c \
-	SetStCmap.c SetStip.c SetTile.c SetTSOrig.c SetTxtProp.c \
-	SetWMCMapW.c SetWMProto.c StBytes.c StColor.c StColors.c \
-	StName.c StNColor.c StrKeysym.c StrToText.c Sync.c Synchro.c \
-	Text16.c Text.c TextExt16.c TextExt.c TextToStr.c TrCoords.c \
-	UndefCurs.c UngrabBut.c UngrabKbd.c UngrabKey.c UngrabPtr.c \
-	UngrabSvr.c UninsCmap.c UnldFont.c UnmapSubs.c UnmapWin.c \
-	VisUtil.c WarpPtr.c Window.c WinEvent.c Withdraw.c WMGeom.c \
-	WMProps.c WrBitF.c Xatomtype.h Xintatom.h Xintconn.h \
-	XlibAsync.c XlibInt.c Xprivate.h XomGeneric.h Xresinternal.h \
-	Xrm.c XrmI.h $(am__append_1) $(am__append_2) $(am__append_3) \
-	$(am__append_4) $(am__append_6)
+	FreeCmap.c FreeCols.c FreeCurs.c FreeEData.c FreeEventData.c \
+	FreeGC.c FreePix.c FSSaver.c FSWrap.c GCMisc.c Geom.c \
+	GetAtomNm.c GetColor.c GetDflt.c GetEventData.c GetFPath.c \
+	GetFProp.c GetGCVals.c GetGeom.c GetHColor.c GetHints.c \
+	GetIFocus.c GetImage.c GetKCnt.c GetMoEv.c GetNrmHint.c \
+	GetPCnt.c GetPntMap.c GetProp.c GetRGBCMap.c GetSOwner.c \
+	GetSSaver.c GetStCmap.c GetTxtProp.c GetWAttrs.c GetWMCMapW.c \
+	GetWMProto.c globals.c GrButton.c GrKeybd.c GrKey.c \
+	GrPointer.c GrServer.c Host.c Iconify.c IfEvent.c imConv.c \
+	ImText16.c ImText.c ImUtil.c InitExt.c InsCmap.c IntAtom.c \
+	KeyBind.c Key.h KeysymStr.c KillCl.c LiHosts.c LiICmaps.c \
+	LiProps.c ListExt.c LoadFont.c LockDis.c locking.c locking.h \
+	LookupCol.c LowerWin.c Macros.c MapRaised.c MapSubs.c \
+	MapWindow.c MaskEvent.c Misc.c ModMap.c MoveWin.c NextEvent.c \
+	OCWrap.c OMWrap.c OpenDis.c ParseCmd.c ParseCol.c ParseGeom.c \
+	PeekEvent.c PeekIfEv.c Pending.c PixFormats.c PmapBgnd.c \
+	PmapBord.c poly.h PolyReg.c PolyTxt16.c PolyTxt.c PropAlloc.c \
+	PutBEvent.c PutImage.c Quarks.c QuBest.c QuColor.c QuColors.c \
+	QuCurShp.c QuExt.c QuKeybd.c QuPntr.c QuStipShp.c QuTextE16.c \
+	QuTextExt.c QuTileShp.c QuTree.c RaiseWin.c RdBitF.c \
+	RecolorC.c ReconfWin.c ReconfWM.c Region.c RegstFlt.c \
+	RepWindow.c RestackWs.c RotProp.c ScrResStr.c SelInput.c \
+	SendEvent.c SetBack.c SetClMask.c SetClOrig.c SetCRects.c \
+	SetDashes.c SetFont.c SetFore.c SetFPath.c SetFunc.c \
+	SetHints.c SetIFocus.c SetLocale.c SetLStyle.c SetNrmHint.c \
+	SetPMask.c SetPntMap.c SetRGBCMap.c SetSOwner.c SetSSaver.c \
+	SetState.c SetStCmap.c SetStip.c SetTile.c SetTSOrig.c \
+	SetTxtProp.c SetWMCMapW.c SetWMProto.c StBytes.c StColor.c \
+	StColors.c StName.c StNColor.c StrKeysym.c StrToText.c Sync.c \
+	Synchro.c Text16.c Text.c TextExt16.c TextExt.c TextToStr.c \
+	TrCoords.c UndefCurs.c UngrabBut.c UngrabKbd.c UngrabKey.c \
+	UngrabPtr.c UngrabSvr.c UninsCmap.c UnldFont.c UnmapSubs.c \
+	UnmapWin.c utlist.h VisUtil.c WarpPtr.c Window.c WinEvent.c \
+	Withdraw.c WMGeom.c WMProps.c WrBitF.c Xatomtype.h Xintatom.h \
+	Xintconn.h XlibAsync.c XlibInt.c Xprivate.h XomGeneric.h \
+	Xresinternal.h Xrm.c XrmI.h $(am__append_1) $(am__append_2) \
+	$(am__append_3) $(am__append_4) $(am__append_6)
 x11datadir = @X11_DATADIR@
 x11data_DATA = XKeysymDB XErrorDB
 EXTRA_DIST = \
@@ -553,7 +554,7 @@ EXTRA_DIST = \
 @XLOCALE_TRUE@USE_I18N_LIBS = $(I18N_LIBS)
 @XCMS_TRUE@USE_XCMS_LIBS = $(XCMS_LIBS)
 @XKB_TRUE@USE_XKB_LIBS = $(XKB_LIBS)
-libX11_la_LDFLAGS = -version-number 6:2:0 -no-undefined
+libX11_la_LDFLAGS = -version-number 6:3:0 -no-undefined
 libX11_la_LIBADD = \
 	$(USE_I18N_LIBS) \
 	$(USE_XCMS_LIBS) \
@@ -745,6 +746,7 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FreeCols.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FreeCurs.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FreeEData.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FreeEventData.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FreeGC.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FreePix.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/GCMisc.Plo@am__quote@
@@ -752,6 +754,7 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/GetAtomNm.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/GetColor.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/GetDflt.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/GetEventData.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/GetFPath.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/GetFProp.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/GetGCVals.Plo@am__quote@
diff --git a/libX11/src/MaskEvent.c b/libX11/src/MaskEvent.c
index acd903f9e..14af00cc0 100644
--- a/libX11/src/MaskEvent.c
+++ b/libX11/src/MaskEvent.c
@@ -53,6 +53,10 @@ XMaskEvent (
 	unsigned long qe_serial = 0;
 
         LockDisplay(dpy);
+
+	/* Delete unclaimed cookies */
+	_XFreeEventCookies(dpy);
+
 	prev = NULL;
 	while (1) {
 	    for (qelt = prev ? prev->next : dpy->head;
diff --git a/libX11/src/NextEvent.c b/libX11/src/NextEvent.c
index d4f72e773..1dc8384e4 100644
--- a/libX11/src/NextEvent.c
+++ b/libX11/src/NextEvent.c
@@ -46,11 +46,15 @@ XNextEvent (
 
 	LockDisplay(dpy);
 
+	/* Delete unclaimed cookies */
+	_XFreeEventCookies(dpy);
+
 	if (dpy->head == NULL)
 	    _XReadEvents(dpy);
 	qelt = dpy->head;
 	*event = qelt->event;
 	_XDeq(dpy, NULL, qelt);
+	_XStoreEventCookie(dpy, event);
 	UnlockDisplay(dpy);
 	return 0;
 }
diff --git a/libX11/src/OpenDis.c b/libX11/src/OpenDis.c
index 29ac65c6a..230ae561f 100644
--- a/libX11/src/OpenDis.c
+++ b/libX11/src/OpenDis.c
@@ -790,6 +790,17 @@ _XBigReqHandler(
 
 void _XFreeDisplayStructure(Display *dpy)
 {
+	/* move all cookies in the EQ to the jar, then free them. */
+	if (dpy->qfree) {
+	    _XQEvent *qelt = dpy->qfree;
+	    while (qelt) {
+		if (_XIsEventCookie(dpy, &qelt->event))
+		    _XStoreEventCookie(dpy, &qelt->event);
+		qelt = qelt->next;
+	    }
+        }
+	if (dpy->cookiejar)
+	    _XFreeEventCookies(dpy);
 	while (dpy->ext_procs) {
 	    _XExtension *ext = dpy->ext_procs;
 	    dpy->ext_procs = ext->next;
diff --git a/libX11/src/PeekEvent.c b/libX11/src/PeekEvent.c
index 6eec4a04d..344fe02b2 100644
--- a/libX11/src/PeekEvent.c
+++ b/libX11/src/PeekEvent.c
@@ -43,10 +43,15 @@ XPeekEvent (
 	register Display *dpy,
 	register XEvent *event)
 {
+	XEvent copy;
 	LockDisplay(dpy);
 	if (dpy->head == NULL)
 	    _XReadEvents(dpy);
 	*event = (dpy->head)->event;
+	if (_XCopyEventCookie(dpy, &event->xcookie, &copy.xcookie)) {
+	    _XStoreEventCookie(dpy, &copy);
+	    *event = copy;
+	}
 	UnlockDisplay(dpy);
 	return 1;
 }
diff --git a/libX11/src/PeekIfEv.c b/libX11/src/PeekIfEv.c
index 1d5b1ab9c..5105b6a58 100644
--- a/libX11/src/PeekIfEv.c
+++ b/libX11/src/PeekIfEv.c
@@ -60,7 +60,12 @@ XPeekIfEvent (
 		 prev = qelt, qelt = qelt->next) {
 		if(qelt->qserial_num > qe_serial
 		   && (*predicate)(dpy, &qelt->event, arg)) {
+		    XEvent copy;
 		    *event = qelt->event;
+		    if (_XCopyEventCookie(dpy, &event->xcookie, &copy.xcookie)) {
+			_XStoreEventCookie(dpy, &copy);
+			*event = copy;
+		    }
 		    UnlockDisplay(dpy);
 		    return 0;
 		}
diff --git a/libX11/src/PutBEvent.c b/libX11/src/PutBEvent.c
index eca44f3af..03a9cd266 100644
--- a/libX11/src/PutBEvent.c
+++ b/libX11/src/PutBEvent.c
@@ -41,6 +41,7 @@ _XPutBackEvent (
     register XEvent *event)
 	{
 	register _XQEvent *qelt;
+	XEvent store = *event;
 
 	if (!dpy->qfree) {
     	    if ((dpy->qfree = (_XQEvent *) Xmalloc (sizeof (_XQEvent))) == NULL) {
@@ -48,11 +49,26 @@ _XPutBackEvent (
 	    }
 	    dpy->qfree->next = NULL;
 	}
+
+	/* unclaimed cookie? */
+	if (_XIsEventCookie(dpy, event))
+	{
+	    XEvent copy = {0};
+            /* if not claimed, then just fetch and store again */
+	    if (!event->xcookie.data) {
+		_XFetchEventCookie(dpy, &event->xcookie);
+		store = *event;
+	    } else { /* if claimed, copy, client must free */
+		_XCopyEventCookie(dpy, &event->xcookie, &copy.xcookie);
+		store = copy;
+	    }
+	}
+
 	qelt = dpy->qfree;
 	dpy->qfree = qelt->next;
 	qelt->qserial_num = dpy->next_event_serial_num++;
 	qelt->next = dpy->head;
-	qelt->event = *event;
+	qelt->event = store;
 	dpy->head = qelt;
 	if (dpy->tail == NULL)
 	    dpy->tail = qelt;
diff --git a/libX11/src/WinEvent.c b/libX11/src/WinEvent.c
index c6daf2a81..bcdf98148 100644
--- a/libX11/src/WinEvent.c
+++ b/libX11/src/WinEvent.c
@@ -56,6 +56,10 @@ XWindowEvent (
 	unsigned long qe_serial = 0;
 
         LockDisplay(dpy);
+
+	/* Delete unclaimed cookies */
+	_XFreeEventCookies(dpy);
+
 	prev = NULL;
 	while (1) {
 	    for (qelt = prev ? prev->next : dpy->head;
diff --git a/libX11/src/XlibInt.c b/libX11/src/XlibInt.c
index 04935ab39..445b8b010 100644
--- a/libX11/src/XlibInt.c
+++ b/libX11/src/XlibInt.c
@@ -2264,6 +2264,128 @@ void _XEatData(
 }
 #endif /* !USE_XCB */
 
+/* Cookie jar implementation
+   dpy->cookiejar is a linked list. _XEnq receives the events but leaves
+   them in the normal EQ. _XStoreEvent returns the cookie event (minus
+   data pointer) and adds it to the cookiejar. _XDeq just removes
+   the entry like any other event but resets the data pointer for
+   cookie events (to avoid double-free, the memory is re-used by Xlib).
+
+   _XFetchEventCookie (called from XGetEventData) removes a cookie from the
+   jar. _XFreeEventCookies removes all unclaimed cookies from the jar
+   (called by XNextEvent).
+
+   _XFreeDisplayStructure calls _XFreeEventCookies for each cookie in the
+   normal EQ.
+ */
+
+#include "utlist.h"
+struct stored_event {
+    XGenericEventCookie ev;
+    struct stored_event *prev;
+    struct stored_event *next;
+};
+
+Bool
+_XIsEventCookie(Display *dpy, XEvent *ev)
+{
+    return (ev->xcookie.type == GenericEvent &&
+	    dpy->generic_event_vec[ev->xcookie.extension & 0x7F] != NULL);
+}
+
+/**
+ * Free all events in the event list.
+ */
+void
+_XFreeEventCookies(Display *dpy)
+{
+    struct stored_event **head, *e, *tmp;
+
+    if (!dpy->cookiejar)
+        return;
+
+    head = (struct stored_event**)&dpy->cookiejar;
+
+    DL_FOREACH_SAFE(*head, e, tmp) {
+        XFree(e->ev.data);
+        XFree(e);
+        if (dpy->cookiejar == e)
+            dpy->cookiejar = NULL;
+    }
+}
+
+/**
+ * Add an event to the display's event list. This event must be freed on the
+ * next call to XNextEvent().
+ */
+void
+_XStoreEventCookie(Display *dpy, XEvent *event)
+{
+    XGenericEventCookie* cookie = &event->xcookie;
+    struct stored_event **head, *add;
+
+    if (!_XIsEventCookie(dpy, event))
+        return;
+
+    head = (struct stored_event**)(&dpy->cookiejar);
+
+    add = Xmalloc(sizeof(struct stored_event));
+    if (!add) {
+        ESET(ENOMEM);
+        _XIOError(dpy);
+    }
+    add->ev = *cookie;
+    DL_APPEND(*head, add);
+    cookie->data = NULL; /* don't return data yet, must be claimed */
+}
+
+/**
+ * Return the event with the given cookie and remove it from the list.
+ */
+Bool
+_XFetchEventCookie(Display *dpy, XGenericEventCookie* ev)
+{
+    Bool ret = False;
+    struct stored_event **head, *event;
+    head = (struct stored_event**)&dpy->cookiejar;
+
+    if (!_XIsEventCookie(dpy, (XEvent*)ev))
+        return ret;
+
+    DL_FOREACH(*head, event) {
+        if (event->ev.cookie == ev->cookie &&
+            event->ev.extension == ev->extension &&
+            event->ev.evtype == ev->evtype) {
+            *ev = event->ev;
+            DL_DELETE(*head, event);
+            Xfree(event);
+            ret = True;
+            break;
+        }
+    }
+
+    return ret;
+}
+
+Bool
+_XCopyEventCookie(Display *dpy, XGenericEventCookie *in, XGenericEventCookie *out)
+{
+    Bool ret = False;
+    int extension;
+
+    if (!_XIsEventCookie(dpy, (XEvent*)in) || !out)
+        return ret;
+
+    extension = in->extension & 0x7F;
+
+    if (!dpy->generic_event_copy_vec[extension])
+        return ret;
+
+    ret = ((*dpy->generic_event_copy_vec[extension])(dpy, in, out));
+    out->cookie = ret ? ++dpy->next_cookie  : 0;
+    return ret;
+}
+
 
 /*
  * _XEnq - Place event packets on the display's queue.
@@ -2275,6 +2397,7 @@ void _XEnq(
 	register xEvent *event)
 {
 	register _XQEvent *qelt;
+	int type, extension;
 
 	if ((qelt = dpy->qfree)) {
 		/* If dpy->qfree is non-NULL do this, else malloc a new one. */
@@ -2287,8 +2410,29 @@ void _XEnq(
 		_XIOError(dpy);
 	}
 	qelt->next = NULL;
-	/* go call through display to find proper event reformatter */
-	if ((*dpy->event_vec[event->u.u.type & 0177])(dpy, &qelt->event, event)) {
+
+	type = event->u.u.type & 0177;
+	extension = ((xGenericEvent*)event)->extension;
+	/* If an extension has registerd a generic_event_vec handler, then
+	 * it can handle event cookies. Otherwise, proceed with the normal
+	 * event handlers.
+	 *
+	 * If the generic_event_vec is called, qelt->event is a event cookie
+	 * with the data pointer and the "free" pointer set. Data pointer is
+	 * some memory allocated by the extension.
+	 */
+        if (type == GenericEvent && dpy->generic_event_vec[extension & 0x7F]) {
+	    XGenericEventCookie *cookie = &qelt->event.xcookie;
+	    (*dpy->generic_event_vec[extension & 0x7F])(dpy, cookie, event);
+	    cookie->cookie = ++dpy->next_cookie;
+
+	    qelt->qserial_num = dpy->next_event_serial_num++;
+	    if (dpy->tail)	dpy->tail->next = qelt;
+	    else		dpy->head = qelt;
+
+	    dpy->tail = qelt;
+	    dpy->qlen++;
+	} else if ((*dpy->event_vec[type])(dpy, &qelt->event, event)) {
 	    qelt->qserial_num = dpy->next_event_serial_num++;
 	    if (dpy->tail)	dpy->tail->next = qelt;
 	    else 		dpy->head = qelt;
@@ -2322,6 +2466,13 @@ void _XDeq(
     qelt->next = dpy->qfree;
     dpy->qfree = qelt;
     dpy->qlen--;
+
+    if (_XIsEventCookie(dpy, &qelt->event)) {
+	XGenericEventCookie* cookie = &qelt->event.xcookie;
+	/* dpy->qfree is re-used, reset memory to avoid double free on
+	 * _XFreeDisplayStructure */
+	cookie->data = NULL;
+    }
 }
 
 /*
@@ -2343,6 +2494,34 @@ _XUnknownWireEvent(
 	return(False);
 }
 
+Bool
+_XUnknownWireEventCookie(
+    Display *dpy,	/* pointer to display structure */
+    XGenericEventCookie *re,	/* pointer to where event should be reformatted */
+    xEvent *event)	/* wire protocol event */
+{
+#ifdef notdef
+	fprintf(stderr,
+	    "Xlib: unhandled wire cookie event! extension number = %d, display = %x\n.",
+			((xGenericEvent*)event)->extension, dpy);
+#endif
+	return(False);
+}
+
+Bool
+_XUnknownCopyEventCookie(
+    Display *dpy,	/* pointer to display structure */
+    XGenericEventCookie *in,	/* source */
+    XGenericEventCookie *out)	/* destination */
+{
+#ifdef notdef
+	fprintf(stderr,
+	    "Xlib: unhandled cookie event copy! extension number = %d, display = %x\n.",
+			in->extension, dpy);
+#endif
+	return(False);
+}
+
 /*ARGSUSED*/
 Status
 _XUnknownNativeEvent(
diff --git a/libX11/src/makefile b/libX11/src/makefile
index 535939c84..f5f9baa7b 100644
--- a/libX11/src/makefile
+++ b/libX11/src/makefile
@@ -83,6 +83,7 @@ CSRCS = \
                   FreeCols.c \
                   FreeCurs.c \
                   FreeEData.c \
+                  FreeEventData.c \
                   FreeGC.c \
                   FreePix.c \
                   FSSaver.c \
@@ -92,6 +93,7 @@ CSRCS = \
                   GetAtomNm.c \
                   GetColor.c \
                   GetDflt.c \
+                  GetEventData.c \
                   GetFPath.c \
                   GetFProp.c \
                   GetGCVals.c \
diff --git a/libX11/src/utlist.h b/libX11/src/utlist.h
new file mode 100644
index 000000000..215c2c62e
--- /dev/null
+++ b/libX11/src/utlist.h
@@ -0,0 +1,116 @@
+/*
+Copyright (c) 2007-2009, Troy D. Hanson
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef UTLIST_H
+#define UTLIST_H
+
+#define UTLIST_VERSION 1.7
+
+/* From: http://uthash.sourceforge.net/utlist.html */
+/*
+ * This file contains macros to manipulate singly and doubly-linked lists.
+ *
+ * 1. LL_ macros:  singly-linked lists.
+ * 2. DL_ macros:  doubly-linked lists.
+ * 3. CDL_ macros: circular doubly-linked lists.
+ *
+ * To use singly-linked lists, your structure must have a "next" pointer.
+ * To use doubly-linked lists, your structure must "prev" and "next" pointers.
+ * Either way, the pointer to the head of the list must be initialized to NULL.
+ *
+ * ----------------.EXAMPLE -------------------------
+ * struct item {
+ *      int id;
+ *      struct item *prev, *next;
+ * }
+ *
+ * struct item *list = NULL:
+ *
+ * int main() {
+ *      struct item *item;
+ *      ... allocate and populate item ...
+ *      DL_APPEND(list, item);
+ * }
+ * --------------------------------------------------
+ *
+ * For doubly-linked lists, the append and delete macros are O(1)
+ * For singly-linked lists, append and delete are O(n) but prepend is O(1)
+ * The sort macro is O(n log(n)) for all types of single/double/circular lists.
+ */
+
+
+/******************************************************************************
+ * doubly linked list macros (non-circular)                                   *
+ *****************************************************************************/
+#define DL_PREPEND(head,add)                                                     \
+do {                                                                             \
+ (add)->next = head;                                                             \
+ if (head) {                                                                     \
+   (add)->prev = (head)->prev;                                                   \
+   (head)->prev = (add);                                                         \
+ } else {                                                                        \
+   (add)->prev = (add);                                                          \
+ }                                                                               \
+ (head) = (add);                                                                 \
+} while (0)
+
+#define DL_APPEND(head,add)                                                      \
+do {                                                                             \
+  if (head) {                                                                    \
+      (add)->prev = (head)->prev;                                                \
+      (head)->prev->next = (add);                                                \
+      (head)->prev = (add);                                                      \
+      (add)->next = NULL;                                                        \
+  } else {                                                                       \
+      (head)=(add);                                                              \
+      (head)->prev = (head);                                                     \
+      (head)->next = NULL;                                                       \
+  }                                                                              \
+} while (0);
+
+#define DL_DELETE(head,del)                                                      \
+do {                                                                             \
+  if ((del)->prev == (del)) {                                                    \
+      (head)=NULL;                                                               \
+  } else if ((del)==(head)) {                                                    \
+      (del)->next->prev = (del)->prev;                                           \
+      (head) = (del)->next;                                                      \
+  } else {                                                                       \
+      (del)->prev->next = (del)->next;                                           \
+      if ((del)->next) {                                                         \
+          (del)->next->prev = (del)->prev;                                       \
+      } else {                                                                   \
+          (head)->prev = (del)->prev;                                            \
+      }                                                                          \
+  }                                                                              \
+} while (0);
+
+
+#define DL_FOREACH(head,el)                                                      \
+    for(el=head;el;el=el->next)
+
+#define DL_FOREACH_SAFE(head,el,tmp)                                             \
+    for(el=head,tmp=el->next;el;el=tmp,tmp=(el) ? (el->next) : NULL)
+
+#endif /* UTLIST_H */
+
diff --git a/libXau/AuLock.c b/libXau/AuLock.c
index 001235607..69b1fd69a 100644
--- a/libXau/AuLock.c
+++ b/libXau/AuLock.c
@@ -90,14 +90,28 @@ long	dead)
 		(void) close (creat_fd);
 	}
 	if (creat_fd != -1) {
-	    if (link (creat_name, link_name) != -1)
-		return LOCK_SUCCESS;
-	    if (errno == ENOENT) {
-		creat_fd = -1;	/* force re-creat next time around */
-		continue;
-	    }
-	    if (errno != EEXIST)
-		return LOCK_ERROR;
+#ifndef X_NOT_POSIX
+	    /* The file system may not support hard links, and pathconf should tell us that. */
+	    if (1 == pathconf(creat_name, _PC_LINK_MAX)) {
+		if (-1 == rename(creat_name, link_name)) {
+		    /* Is this good enough?  Perhaps we should retry.  TEST */
+		    return LOCK_ERROR;
+		} else {
+		    return LOCK_SUCCESS;
+		}
+	    } else {
+#endif
+	    	if (link (creat_name, link_name) != -1)
+		    return LOCK_SUCCESS;
+		if (errno == ENOENT) {
+		    creat_fd = -1;	/* force re-creat next time around */
+		    continue;
+	    	}
+	    	if (errno != EEXIST)
+		    return LOCK_ERROR;
+#ifndef X_NOT_POSIX
+	   }
+#endif
 	}
 	(void) sleep ((unsigned) timeout);
 	--retries;
diff --git a/libXau/ChangeLog b/libXau/ChangeLog
index c22272d99..4be0c2d42 100644
--- a/libXau/ChangeLog
+++ b/libXau/ChangeLog
@@ -1,3 +1,48 @@
+commit 825435514bd91d0d903247c46249a87d6fe8ae09
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Fri Aug 28 14:34:32 2009 +1000
+
+    libXau 1.0.5
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit fc54a4f03b926dfdb590b112c7128516ffc25539
+Author: Jeremy Huddleston <jeremy@yuffie.local>
+Date:   Sun Feb 22 11:14:04 2009 -0800
+
+    Make file locking more robust for network shares like AFP
+
+commit 742ff03dcad4d16ca8901ed47be91b303523a385
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Fri Feb 6 11:35:40 2009 -0800
+
+    Restore FamilyKrb5Principal definition
+    
+    Even if Kerberos5 support is currently unimplemented in the X server &
+    libXau, the Family id for the X11 protocol is still defined and reserved
+    for Kerberos5, and should be recorded here for interoperability with
+    other implementations and to avoid reuse if someone adds a new
+    authentication family in the future.
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit c147fb417582e7384b5464bb53cfd492f9d7c69d
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date:   Mon Feb 2 16:54:20 2009 -0200
+
+    Remove old api kerberos.
+    
+      LibXau uses a 1993 kerberos api, but the X Server side support has
+    been already removed for quite some time.
+      This corrects bug report
+    https://bugs.freedesktop.org/show_bug.cgi?id=14684
+
+commit 11fbe620625520668f5e88e4f5a8fe149a7cfa3f
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date:   Thu Jan 29 15:08:23 2009 -0200
+
+    Janitor: Correct make distcheck and remove extra .gitignore file.
+
 commit 7f6275300243fd15ce974d1b5e478b47f7758485
 Author: Alan Coopersmith <alan.coopersmith@sun.com>
 Date:   Tue Aug 26 14:19:19 2008 -0700
diff --git a/libXau/Makefile.am b/libXau/Makefile.am
index 635fdb97d..01e24149d 100644
--- a/libXau/Makefile.am
+++ b/libXau/Makefile.am
@@ -18,10 +18,6 @@ libXau_la_SOURCES = \
 	AuUnlock.c \
 	AuWrite.c
 
-if KERBEROS
-libXau_la_SOURCES +=k5encode.c
-endif KERBEROS
-
 xauincludedir=$(includedir)/X11
 
 xauinclude_HEADERS = include/X11/Xauth.h
@@ -87,6 +83,6 @@ Xau.$(LIB_MAN_SUFFIX): $(srcdir)/Xau.man
 .PHONY: ChangeLog
 
 ChangeLog:
-	(GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
+	$(CHANGELOG_CMD)
 
 dist-hook: ChangeLog
diff --git a/libXau/Makefile.in b/libXau/Makefile.in
index e5cb1717b..cd2c5a5b3 100644
--- a/libXau/Makefile.in
+++ b/libXau/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,8 +19,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -34,7 +36,6 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-@KERBEROS_TRUE@am__append_1 = k5encode.c
 check_PROGRAMS = Autest$(EXEEXT)
 TESTS = Autest$(EXEEXT)
 subdir = .
@@ -52,27 +53,41 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES = xau.pc
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(libmandir)" \
 	"$(DESTDIR)$(lintlibdir)" "$(DESTDIR)$(pkgconfigdir)" \
 	"$(DESTDIR)$(xauincludedir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(lib_LTLIBRARIES)
 am__DEPENDENCIES_1 =
 libXau_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
-am__libXau_la_SOURCES_DIST = AuDispose.c AuFileName.c AuGetAddr.c \
-	AuGetBest.c AuLock.c AuRead.c AuUnlock.c AuWrite.c k5encode.c
-@KERBEROS_TRUE@am__objects_1 = k5encode.lo
 am_libXau_la_OBJECTS = AuDispose.lo AuFileName.lo AuGetAddr.lo \
-	AuGetBest.lo AuLock.lo AuRead.lo AuUnlock.lo AuWrite.lo \
-	$(am__objects_1)
+	AuGetBest.lo AuLock.lo AuRead.lo AuUnlock.lo AuWrite.lo
 libXau_la_OBJECTS = $(am_libXau_la_OBJECTS)
-libXau_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+libXau_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(libXau_la_LDFLAGS) $(LDFLAGS) -o $@
 am_Autest_OBJECTS = Autest.$(OBJEXT)
@@ -81,40 +96,52 @@ Autest_DEPENDENCIES = libXau.la
 DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC    " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
 CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD  " $@;
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
 SOURCES = $(libXau_la_SOURCES) $(Autest_SOURCES)
-DIST_SOURCES = $(am__libXau_la_SOURCES_DIST) $(Autest_SOURCES)
-libmanDATA_INSTALL = $(INSTALL_DATA)
-lintlibDATA_INSTALL = $(INSTALL_DATA)
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
+DIST_SOURCES = $(libXau_la_SOURCES) $(Autest_SOURCES)
 DATA = $(libman_DATA) $(lintlib_DATA) $(pkgconfig_DATA)
-xauincludeHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(xauinclude_HEADERS)
 ETAGS = etags
 CTAGS = ctags
+am__tty_colors = \
+red=; grn=; lgn=; blu=; std=
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 APP_MAN_DIR = @APP_MAN_DIR@
 APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
 AR = @AR@
@@ -126,26 +153,24 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CHANGELOG_CMD = @CHANGELOG_CMD@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
+CWARNFLAGS = @CWARNFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
 DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
 GREP = @GREP@
@@ -154,6 +179,7 @@ INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
@@ -163,6 +189,7 @@ LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
 LINT = @LINT@
 LINTLIB = @LINTLIB@
 LINT_FLAGS = @LINT_FLAGS@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
@@ -170,8 +197,12 @@ MAKEINFO = @MAKEINFO@
 MISC_MAN_DIR = @MISC_MAN_DIR@
 MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -181,6 +212,7 @@ PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PKG_CONFIG = @PKG_CONFIG@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
@@ -192,8 +224,7 @@ abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -208,6 +239,7 @@ build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
+distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
@@ -224,6 +256,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -236,6 +269,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 lib_LTLIBRARIES = libXau.la
@@ -243,8 +277,16 @@ AM_CFLAGS = $(XAU_CFLAGS)
 INCLUDES = -I${top_srcdir}/include
 libXau_la_LDFLAGS = -version-number 6:0:0 -no-undefined
 libXau_la_LIBADD = $(XAU_LIBS)
-libXau_la_SOURCES = AuDispose.c AuFileName.c AuGetAddr.c AuGetBest.c \
-	AuLock.c AuRead.c AuUnlock.c AuWrite.c $(am__append_1)
+libXau_la_SOURCES = \
+	AuDispose.c \
+	AuFileName.c \
+	AuGetAddr.c \
+	AuGetBest.c \
+	AuLock.c \
+	AuRead.c \
+	AuUnlock.c \
+	AuWrite.c
+
 xauincludedir = $(includedir)/X11
 xauinclude_HEADERS = include/X11/Xauth.h
 pkgconfigdir = $(libdir)/pkgconfig
@@ -289,15 +331,15 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
-	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -313,9 +355,10 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
 	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 
 config.h: stamp-h1
 	@if test ! -f $@; then \
@@ -327,7 +370,7 @@ stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status config.h
 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
 
@@ -338,20 +381,24 @@ xau.pc: $(top_builddir)/config.status $(srcdir)/xau.pc.in
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
 	done
 
 clean-libLTLIBRARIES:
@@ -363,17 +410,19 @@ clean-libLTLIBRARIES:
 	  rm -f "$${dir}/so_locations"; \
 	done
 libXau.la: $(libXau_la_OBJECTS) $(libXau_la_DEPENDENCIES) 
-	$(libXau_la_LINK) -rpath $(libdir) $(libXau_la_OBJECTS) $(libXau_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libXau_la_LINK) -rpath $(libdir) $(libXau_la_OBJECTS) $(libXau_la_LIBADD) $(LIBS)
 
 clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Autest$(EXEEXT): $(Autest_OBJECTS) $(Autest_DEPENDENCIES) 
 	@rm -f Autest$(EXEEXT)
-	$(LINK) $(Autest_OBJECTS) $(Autest_LDADD) $(LIBS)
+	$(AM_V_CCLD)$(LINK) $(Autest_OBJECTS) $(Autest_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -390,25 +439,27 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/AuUnlock.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/AuWrite.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Autest.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/k5encode.Plo@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
-@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -420,128 +471,145 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 distclean-libtool:
-	-rm -f libtool
+	-rm -f libtool config.lt
 install-libmanDATA: $(libman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(libmandir)" || $(MKDIR_P) "$(DESTDIR)$(libmandir)"
-	@list='$(libman_DATA)'; for p in $$list; do \
+	@list='$(libman_DATA)'; test -n "$(libmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(libmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(libmandir)/$$f'"; \
-	  $(libmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(libmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(libmandir)" || exit $$?; \
 	done
 
 uninstall-libmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(libman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(libmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(libmandir)/$$f"; \
-	done
+	@list='$(libman_DATA)'; test -n "$(libmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(libmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(libmandir)" && rm -f $$files
 install-lintlibDATA: $(lintlib_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(lintlibdir)" || $(MKDIR_P) "$(DESTDIR)$(lintlibdir)"
-	@list='$(lintlib_DATA)'; for p in $$list; do \
+	@list='$(lintlib_DATA)'; test -n "$(lintlibdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(lintlibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(lintlibdir)/$$f'"; \
-	  $(lintlibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(lintlibdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(lintlibdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(lintlibdir)" || exit $$?; \
 	done
 
 uninstall-lintlibDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(lintlib_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(lintlibdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(lintlibdir)/$$f"; \
-	done
+	@list='$(lintlib_DATA)'; test -n "$(lintlibdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(lintlibdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(lintlibdir)" && rm -f $$files
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 	done
 
 uninstall-pkgconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
-	done
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
 install-xauincludeHEADERS: $(xauinclude_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(xauincludedir)" || $(MKDIR_P) "$(DESTDIR)$(xauincludedir)"
-	@list='$(xauinclude_HEADERS)'; for p in $$list; do \
+	@list='$(xauinclude_HEADERS)'; test -n "$(xauincludedir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(xauincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(xauincludedir)/$$f'"; \
-	  $(xauincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(xauincludedir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(xauincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(xauincludedir)" || exit $$?; \
 	done
 
 uninstall-xauincludeHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(xauinclude_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(xauincludedir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(xauincludedir)/$$f"; \
-	done
+	@list='$(xauinclude_HEADERS)'; test -n "$(xauincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(xauincludedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(xauincludedir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 check-TESTS: $(TESTS)
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; ws='[	 ]'; \
+	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
 	srcdir=$(srcdir); export srcdir; \
 	list=' $(TESTS) '; \
+	$(am__tty_colors); \
 	if test -n "$$list"; then \
 	  for tst in $$list; do \
 	    if test -f ./$$tst; then dir=./; \
@@ -550,49 +618,63 @@ check-TESTS: $(TESTS)
 	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
 	      all=`expr $$all + 1`; \
 	      case " $(XFAIL_TESTS) " in \
-	      *$$ws$$tst$$ws*) \
+	      *[\ \	]$$tst[\ \	]*) \
 		xpass=`expr $$xpass + 1`; \
 		failed=`expr $$failed + 1`; \
-		echo "XPASS: $$tst"; \
+		col=$$red; res=XPASS; \
 	      ;; \
 	      *) \
-		echo "PASS: $$tst"; \
+		col=$$grn; res=PASS; \
 	      ;; \
 	      esac; \
 	    elif test $$? -ne 77; then \
 	      all=`expr $$all + 1`; \
 	      case " $(XFAIL_TESTS) " in \
-	      *$$ws$$tst$$ws*) \
+	      *[\ \	]$$tst[\ \	]*) \
 		xfail=`expr $$xfail + 1`; \
-		echo "XFAIL: $$tst"; \
+		col=$$lgn; res=XFAIL; \
 	      ;; \
 	      *) \
 		failed=`expr $$failed + 1`; \
-		echo "FAIL: $$tst"; \
+		col=$$red; res=FAIL; \
 	      ;; \
 	      esac; \
 	    else \
 	      skip=`expr $$skip + 1`; \
-	      echo "SKIP: $$tst"; \
+	      col=$$blu; res=SKIP; \
 	    fi; \
+	    echo "$${col}$$res$${std}: $$tst"; \
 	  done; \
+	  if test "$$all" -eq 1; then \
+	    tests="test"; \
+	    All=""; \
+	  else \
+	    tests="tests"; \
+	    All="All "; \
+	  fi; \
 	  if test "$$failed" -eq 0; then \
 	    if test "$$xfail" -eq 0; then \
-	      banner="All $$all tests passed"; \
+	      banner="$$All$$all $$tests passed"; \
 	    else \
-	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
+	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
+	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
 	    fi; \
 	  else \
 	    if test "$$xpass" -eq 0; then \
-	      banner="$$failed of $$all tests failed"; \
+	      banner="$$failed of $$all $$tests failed"; \
 	    else \
-	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
+	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
+	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
 	    fi; \
 	  fi; \
 	  dashes="$$banner"; \
 	  skipped=""; \
 	  if test "$$skip" -ne 0; then \
-	    skipped="($$skip tests were not run)"; \
+	    if test "$$skip" -eq 1; then \
+	      skipped="($$skip test was not run)"; \
+	    else \
+	      skipped="($$skip tests were not run)"; \
+	    fi; \
 	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
 	      dashes="$$skipped"; \
 	  fi; \
@@ -603,17 +685,21 @@ check-TESTS: $(TESTS)
 	      dashes="$$report"; \
 	  fi; \
 	  dashes=`echo "$$dashes" | sed s/./=/g`; \
-	  echo "$$dashes"; \
+	  if test "$$failed" -eq 0; then \
+	    echo "$$grn$$dashes"; \
+	  else \
+	    echo "$$red$$dashes"; \
+	  fi; \
 	  echo "$$banner"; \
 	  test -z "$$skipped" || echo "$$skipped"; \
 	  test -z "$$report" || echo "$$report"; \
-	  echo "$$dashes"; \
+	  echo "$$dashes$$std"; \
 	  test "$$failed" -eq 0; \
 	else :; fi
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	test -d $(distdir) || mkdir $(distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -629,24 +715,29 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
 	$(MAKE) $(AM_MAKEFLAGS) \
 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
 	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
@@ -654,6 +745,14 @@ dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -681,6 +780,10 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -692,9 +795,11 @@ distcheck: dist
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
@@ -716,13 +821,15 @@ distcheck: dist
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
@@ -771,6 +878,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -794,6 +902,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -803,18 +913,28 @@ install-data-am: install-libmanDATA install-lintlibDATA \
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-libLTLIBRARIES
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -841,18 +961,18 @@ uninstall-am: uninstall-libLTLIBRARIES uninstall-libmanDATA \
 	uninstall-lintlibDATA uninstall-pkgconfigDATA \
 	uninstall-xauincludeHEADERS
 
-.MAKE: install-am install-strip
+.MAKE: all check check-am install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-TESTS check-am \
 	clean clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
 	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
-	dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-compile distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am \
+	dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+	distcheck distclean distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-data install-data-am \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-info install-info-am \
 	install-libLTLIBRARIES install-libmanDATA install-lintlibDATA \
 	install-man install-pdf install-pdf-am install-pkgconfigDATA \
 	install-ps install-ps-am install-strip \
@@ -880,9 +1000,10 @@ Xau.$(LIB_MAN_SUFFIX): $(srcdir)/Xau.man
 .PHONY: ChangeLog
 
 ChangeLog:
-	(GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
+	$(CHANGELOG_CMD)
 
 dist-hook: ChangeLog
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/libXau/README b/libXau/README
index 404eef079..9ee12e704 100644
--- a/libXau/README
+++ b/libXau/README
@@ -39,9 +39,7 @@ This scheme involves changes to the following parts of the sample release:
 	-  remove entries from user's auth file
 
 This mechanism assumes that the superuser and the transport layer between 
-the client and the server is secure.  Organizations that desire stricter
-security are encouraged to look at systems such as Kerberos (at Project
-Athena).
+the client and the server is secure.
 
 
 Description
diff --git a/libXau/aclocal.m4 b/libXau/aclocal.m4
index fb2a7d46e..7fc182575 100644
--- a/libXau/aclocal.m4
+++ b/libXau/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,1608 +11,858 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf.  If you want to use that,
-you should regenerate the build system entirely.], [63])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
-# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
 #
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
 #
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
+#   This file is part of GNU Libtool.
 #
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
 #
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
 #
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
 #
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 ])
 
-# AM_CONDITIONAL                                            -*- Autoconf -*-
+# serial 56 LT_INIT
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
 
-# serial 8
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
 
-# serial 9
 
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
 
 
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
 
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
 
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
 
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+_LT_SETUP
 
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
 
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
 
 
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 ])
 
 
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
 fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
 ])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
+_LT_CHECK_OBJDIR
 
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
   fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+  ;;
+esac
 
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
 
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-                  [_AM_DEPENDENCIES(OBJC)],
-                  [define([AC_PROG_OBJC],
-                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-])
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
 
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
 
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $1 | $1:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# Global variables:
+ofile=libtool
+can_build_shared=yes
 
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
 
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-# serial 2
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
 
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
 
-# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
-# From Jim Meyering
+_LT_CC_BASENAME([$compiler])
 
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    _LT_PATH_MAGIC
+  fi
+  ;;
+esac
 
-# serial 4
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
 
-AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode  enable make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
 
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
 
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
 
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
 
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
 
-# serial 5
 
-# AM_MISSING_PROG(NAME, PROGRAM)
+# _LT_CONFIG_LIBTOOL([COMMANDS])
 # ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
 ])
 
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
 
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
 ])
 
-# Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
 
-# serial 3
 
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
 
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
 
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
 
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
 
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
 
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
 
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
 
-# Copyright (C) 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
 
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
 
-# Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
 #
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
 
-# serial 2
 
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-dnl
-dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
-dnl 
-dnl Permission is hereby granted, free of charge, to any person obtaining a
-dnl copy of this software and associated documentation files (the
-dnl "Software"), to deal in the Software without restriction, including
-dnl without limitation the rights to use, copy, modify, merge, publish,
-dnl distribute, and/or sell copies of the Software, and to permit persons
-dnl to whom the Software is furnished to do so, provided that the above
-dnl copyright notice(s) and this permission notice appear in all copies of
-dnl the Software and that both the above copyright notice(s) and this
-dnl permission notice appear in supporting documentation.
-dnl
-dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
-dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
-dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
-dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
-dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
-dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-dnl
-dnl Except as contained in this notice, the name of a copyright holder
-dnl shall not be used in advertising or otherwise to promote the sale, use
-dnl or other dealings in this Software without prior written authorization
-dnl of the copyright holder.
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
 
-# XORG_MACROS_VERSION(required-version)
-# -------------------------------------
-# Minimum version: 1.1.0
-#
-# If you're using a macro added in Version 1.1 or newer, include this in
-# your configure.ac with the minimum required version, such as:
-# XORG_MACROS_VERSION(1.1)
-#
-# To force at least a version with this macro defined, also add:
-# m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
-#
-#
-# See the "minimum version" comment for each macro you use to see what 
-# version you require.
-AC_DEFUN([XORG_MACROS_VERSION],[
-	[XORG_MACROS_needed_version=$1
-	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
-	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
-	AC_MSG_CHECKING([if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}])
-	[XORG_MACROS_version=1.1.6
-	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
-	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
-	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
-		AC_MSG_ERROR([configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x])
-	fi
-	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
-		AC_MSG_ERROR([configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer])
-	fi
-	AC_MSG_RESULT([yes, $XORG_MACROS_version])
-]) # XORG_MACROS_VERSION
 
-# XORG_PROG_RAWCPP()
-# ------------------
-# Minimum version: 1.0.0
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
 #
-# Find cpp program and necessary flags for use in pre-processing text files
-# such as man pages and config files
-AC_DEFUN([XORG_PROG_RAWCPP],[
-AC_REQUIRE([AC_PROG_CPP])
-AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}], 
-   [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])
-
-# Check for flag to avoid builtin definitions - assumes unix is predefined,
-# which is not the best choice for supporting other OS'es, but covers most
-# of the ones we need for now.
-AC_MSG_CHECKING([if $RAWCPP requires -undef])
-AC_LANG_CONFTEST([Does cpp redefine unix ?])
-if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
-	AC_MSG_RESULT([no])
-else
-	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
-		RAWCPPFLAGS=-undef
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
-	fi
-fi
-rm -f conftest.$ac_ext
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
 
-AC_MSG_CHECKING([if $RAWCPP requires -traditional])
-AC_LANG_CONFTEST([Does cpp preserve   "whitespace"?])
-if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
-	AC_MSG_RESULT([no])
-else
-	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
-		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do.])
-	fi
-fi
-rm -f conftest.$ac_ext
-AC_SUBST(RAWCPPFLAGS)
-]) # XORG_PROG_RAWCPP
 
-# XORG_MANPAGE_SECTIONS()
+# _LT_LIBTOOL_CONFIG_VARS
 # -----------------------
-# Minimum version: 1.0.0
-#
-# Determine which sections man pages go in for the different man page types
-# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
-# Not sure if there's any better way than just hardcoding by OS name.
-# Override default settings by setting environment variables
-
-AC_DEFUN([XORG_MANPAGE_SECTIONS],[
-AC_REQUIRE([AC_CANONICAL_HOST])
-
-if test x$APP_MAN_SUFFIX = x    ; then
-    APP_MAN_SUFFIX=1
-fi
-if test x$APP_MAN_DIR = x    ; then
-    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
-fi
-
-if test x$LIB_MAN_SUFFIX = x    ; then
-    LIB_MAN_SUFFIX=3
-fi
-if test x$LIB_MAN_DIR = x    ; then
-    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
-fi
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
 
-if test x$FILE_MAN_SUFFIX = x    ; then
-    case $host_os in
-	solaris*)	FILE_MAN_SUFFIX=4  ;;
-	*)		FILE_MAN_SUFFIX=5  ;;
-    esac
-fi
-if test x$FILE_MAN_DIR = x    ; then
-    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
-fi
 
-if test x$MISC_MAN_SUFFIX = x    ; then
-    case $host_os in
-	solaris*)	MISC_MAN_SUFFIX=5  ;;
-	*)		MISC_MAN_SUFFIX=7  ;;
-    esac
-fi
-if test x$MISC_MAN_DIR = x    ; then
-    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
-fi
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
 
-if test x$DRIVER_MAN_SUFFIX = x    ; then
-    case $host_os in
-	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
-	*)		DRIVER_MAN_SUFFIX=4  ;;
-    esac
-fi
-if test x$DRIVER_MAN_DIR = x    ; then
-    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
-fi
 
-if test x$ADMIN_MAN_SUFFIX = x    ; then
-    case $host_os in
-	solaris*)	ADMIN_MAN_SUFFIX=1m ;;
-	*)		ADMIN_MAN_SUFFIX=8  ;;
-    esac
-fi
-if test x$ADMIN_MAN_DIR = x    ; then
-    ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
-fi
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
 
 
-AC_SUBST([APP_MAN_SUFFIX])
-AC_SUBST([LIB_MAN_SUFFIX])
-AC_SUBST([FILE_MAN_SUFFIX])
-AC_SUBST([MISC_MAN_SUFFIX])
-AC_SUBST([DRIVER_MAN_SUFFIX])
-AC_SUBST([ADMIN_MAN_SUFFIX])
-AC_SUBST([APP_MAN_DIR])
-AC_SUBST([LIB_MAN_DIR])
-AC_SUBST([FILE_MAN_DIR])
-AC_SUBST([MISC_MAN_DIR])
-AC_SUBST([DRIVER_MAN_DIR])
-AC_SUBST([ADMIN_MAN_DIR])
-]) # XORG_MANPAGE_SECTIONS
-
-# XORG_CHECK_LINUXDOC
+# _LT_CONFIG_COMMANDS
 # -------------------
-# Minimum version: 1.0.0
-#
-# Defines the variable MAKE_TEXT if the necessary tools and
-# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
-# Whether or not the necessary tools and files are found can be checked
-# with the AM_CONDITIONAL "BUILD_LINUXDOC"
-AC_DEFUN([XORG_CHECK_LINUXDOC],[
-if test x$XORG_SGML_PATH = x ; then
-    XORG_SGML_PATH=$prefix/share/sgml
-fi
-HAVE_DEFS_ENT=
-
-if test x"$cross_compiling" = x"yes" ; then
-  HAVE_DEFS_ENT=no
-else
-  AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
-fi
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
 
-AC_PATH_PROG(LINUXDOC, linuxdoc)
-AC_PATH_PROG(PS2PDF, ps2pdf)
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-AC_MSG_CHECKING([Whether to build documentation])
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
 
-if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
-   BUILDDOC=yes
-else
-   BUILDDOC=no
-fi
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
 
-AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+  ;;
+esac
 
-AC_MSG_RESULT([$BUILDDOC])
+_LT_OUTPUT_LIBTOOL_INIT
+])
 
-AC_MSG_CHECKING([Whether to build pdf documentation])
 
-if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
-   BUILDPDFDOC=yes
-else
-   BUILDPDFDOC=no
-fi
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
 
-AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
 
-AC_MSG_RESULT([$BUILDPDFDOC])
+Usage: $[0] [[OPTIONS]]
 
-MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
-MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
-MAKE_PDF="$PS2PDF"
-MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
 
-AC_SUBST(MAKE_TEXT)
-AC_SUBST(MAKE_PS)
-AC_SUBST(MAKE_PDF)
-AC_SUBST(MAKE_HTML)
-]) # XORG_CHECK_LINUXDOC
+Report bugs to <bug-libtool@gnu.org>."
 
-# XORG_CHECK_DOCBOOK
-# -------------------
-# Minimum version: 1.0.0
-#
-# Checks for the ability to build output formats from SGML DocBook source.
-# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
-# indicates whether the necessary tools and files are found and, if set,
-# $(MAKE_XXX) blah.sgml will produce blah.xxx.
-AC_DEFUN([XORG_CHECK_DOCBOOK],[
-if test x$XORG_SGML_PATH = x ; then
-    XORG_SGML_PATH=$prefix/share/sgml
-fi
-HAVE_DEFS_ENT=
-BUILDTXTDOC=no
-BUILDPDFDOC=no
-BUILDPSDOC=no
-BUILDHTMLDOC=no
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
 
-AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
 
-AC_PATH_PROG(DOCBOOKPS, docbook2ps)
-AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
-AC_PATH_PROG(DOCBOOKHTML, docbook2html)
-AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
 
-AC_MSG_CHECKING([Whether to build text documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
-   test x$BUILD_TXTDOC != xno; then
-	BUILDTXTDOC=yes
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
 fi
-AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
-AC_MSG_RESULT([$BUILDTXTDOC])
-
-AC_MSG_CHECKING([Whether to build PDF documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
-   test x$BUILD_PDFDOC != xno; then
-	BUILDPDFDOC=yes
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
 fi
-AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
-AC_MSG_RESULT([$BUILDPDFDOC])
+])# LT_OUTPUT
 
-AC_MSG_CHECKING([Whether to build PostScript documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
-   test x$BUILD_PSDOC != xno; then
-	BUILDPSDOC=yes
-fi
-AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
-AC_MSG_RESULT([$BUILDPSDOC])
 
-AC_MSG_CHECKING([Whether to build HTML documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
-   test x$BUILD_HTMLDOC != xno; then
-	BUILDHTMLDOC=yes
-fi
-AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
-AC_MSG_RESULT([$BUILDHTMLDOC])
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
 
-MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
-MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
-MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
-MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
 
-AC_SUBST(MAKE_TEXT)
-AC_SUBST(MAKE_PS)
-AC_SUBST(MAKE_PDF)
-AC_SUBST(MAKE_HTML)
-]) # XORG_CHECK_DOCBOOK
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
 
-# XORG_CHECK_MALLOC_ZERO
-# ----------------------
-# Minimum version: 1.0.0
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
-# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
-# malloc(0) returns NULL.  Packages should add one of these cflags to
-# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
-AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
-AC_ARG_ENABLE(malloc0returnsnull,
-	AC_HELP_STRING([--enable-malloc0returnsnull],
-		       [malloc(0) returns NULL (default: auto)]),
-	[MALLOC_ZERO_RETURNS_NULL=$enableval],
-	[MALLOC_ZERO_RETURNS_NULL=auto])
+_LT_COPYING
+_LT_LIBTOOL_TAGS
 
-AC_MSG_CHECKING([whether malloc(0) returns NULL])
-if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
-	AC_RUN_IFELSE([
-char *malloc();
-char *realloc();
-char *calloc();
-main() {
-    char *m0, *r0, *c0, *p;
-    m0 = malloc(0);
-    p = malloc(10);
-    r0 = realloc(p,0);
-    c0 = calloc(0);
-    exit(m0 == 0 || r0 == 0 || c0 == 0 ? 0 : 1);
-}],
-		[MALLOC_ZERO_RETURNS_NULL=yes],
-		[MALLOC_ZERO_RETURNS_NULL=no])
-fi
-AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
 
-if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
-	MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
-	XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
-	XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
-else
-	MALLOC_ZERO_CFLAGS=""
-	XMALLOC_ZERO_CFLAGS=""
-	XTMALLOC_ZERO_CFLAGS=""
-fi
-
-AC_SUBST([MALLOC_ZERO_CFLAGS])
-AC_SUBST([XMALLOC_ZERO_CFLAGS])
-AC_SUBST([XTMALLOC_ZERO_CFLAGS])
-]) # XORG_CHECK_MALLOC_ZERO
-
-# XORG_WITH_LINT()
-# ----------------
-# Minimum version: 1.1.0
-#
-# Sets up flags for source checkers such as lint and sparse if --with-lint
-# is specified.   (Use --with-lint=sparse for sparse.)
-# Sets $LINT to name of source checker passed with --with-lint (default: lint)
-# Sets $LINT_FLAGS to flags to pass to source checker
-# Sets LINT automake conditional if enabled (default: disabled)
-#
-AC_DEFUN([XORG_WITH_LINT],[
+_LT_EOF
 
-# Allow checking code with lint, sparse, etc.
-AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
-		[Use a lint-style source code checker (default: disabled)])],
-		[use_lint=$withval], [use_lint=no])
-if test "x$use_lint" = "xyes" ; then
-	LINT="lint"
-else
-	LINT="$use_lint"
-fi
-if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
-    case $LINT in
-	lint|*/lint)
-	    case $host_os in
-		solaris*)
-			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
-			;;
-	    esac
-	    ;;
-    esac
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
 fi
+_LT_EOF
+    ;;
+  esac
 
-AC_SUBST(LINT)
-AC_SUBST(LINT_FLAGS)
-AM_CONDITIONAL(LINT, [test x$LINT != xno])
-
-]) # XORG_WITH_LINT
-
-# XORG_LINT_LIBRARY(LIBNAME)
-# --------------------------
-# Minimum version: 1.1.0
-#
-# Sets up flags for building lint libraries for checking programs that call
-# functions in the library.
-# Disabled by default, enable with --enable-lint-library
-# Sets: 
-#	@LINTLIB@		- name of lint library file to make
-#	MAKE_LINT_LIB		- automake conditional
-#
-
-AC_DEFUN([XORG_LINT_LIBRARY],[
-AC_REQUIRE([XORG_WITH_LINT])
-# Build lint "library" for more indepth checks of programs calling this library
-AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
-	[Create lint library (default: disabled)])],
-	[make_lint_lib=$enableval], [make_lint_lib=no])
-if test "x$make_lint_lib" != "xno" ; then
-	if test "x$LINT" = "xno" ; then
-		AC_MSG_ERROR([Cannot make lint library without --with-lint])
-	fi
-	if test "x$make_lint_lib" = "xyes" ; then
-		LINTLIB=llib-l$1.ln
-	else
-		LINTLIB=$make_lint_lib
-	fi
-fi
-AC_SUBST(LINTLIB)
-AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
+  _LT_PROG_LTMAIN
 
-]) # XORG_LINT_LIBRARY
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
 
-dnl Copyright 2005 Red Hat, Inc
-dnl
-dnl Permission to use, copy, modify, distribute, and sell this software and its
-dnl documentation for any purpose is hereby granted without fee, provided that
-dnl the above copyright notice appear in all copies and that both that
-dnl copyright notice and this permission notice appear in supporting
-dnl documentation.
-dnl
-dnl The above copyright notice and this permission notice shall be included
-dnl in all copies or substantial portions of the Software.
-dnl
-dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-dnl OTHER DEALINGS IN THE SOFTWARE.
-dnl
-dnl Except as contained in this notice, the name of the copyright holders shall
-dnl not be used in advertising or otherwise to promote the sale, use or
-dnl other dealings in this Software without prior written authorization
-dnl from the copyright holders.
-dnl
+  _LT_PROG_XSI_SHELLFNS
 
-# XORG_RELEASE_VERSION
-# --------------------
-# Adds --with/without-release-string and changes the PACKAGE and
-# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION".  If
-# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.  Also
-# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
- 
-AC_DEFUN([XORG_RELEASE_VERSION],[
-	AC_ARG_WITH(release-version,
-			AC_HELP_STRING([--with-release-version=STRING],
-				[Use release version string in package name]),
-			[RELEASE_VERSION="$withval"],
-			[RELEASE_VERSION=""])
-	if test "x$RELEASE_VERSION" != "x"; then
-		PACKAGE="$PACKAGE-$RELEASE_VERSION"
-		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-		AC_MSG_NOTICE([Building with package name set to $PACKAGE])
-	fi
-	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
-		[`echo $PACKAGE_VERSION | cut -d . -f 1`],
-		[Major version of this package])
-	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
-	if test "x$PVM" = "x"; then
-		PVM="0"
-	fi
-	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
-		[$PVM],
-		[Minor version of this package])
-	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
-	if test "x$PVP" = "x"; then
-		PVP="0"
-	fi
-	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
-		[$PVP],
-		[Patch version of this package])
-])
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
 
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
-# serial 48 AC_PROG_LIBTOOL
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
 
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
 
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
-         [],
-         [m4_define([AC_PROVIDE_IFELSE],
-	         [m4_ifdef([AC_PROVIDE_$1],
-		           [$2], [$3])])])
 
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
 
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
 
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
 
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
 
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
 
 
-# AC_LIBTOOL_SETUP
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
 # ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
+m4_defun([_LT_TAG_COMPILER],
 [AC_REQUIRE([AC_PROG_CC])dnl
 
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -1621,35 +871,20 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
 # Allow CC to be a program name with arguments.
 compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
+])# _LT_TAG_COMPILER
 
 
 # _LT_COMPILER_BOILERPLATE
 # ------------------------
 # Check for compiler boilerplate output or warnings with
 # the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 ])# _LT_COMPILER_BOILERPLATE
 
 
@@ -1657,70 +892,203 @@ $rm conftest*
 # ----------------------
 # Check for linker boilerplate output or warnings with
 # the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi])
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
 
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
 # Links a minimal program and checks the executable
 # for the system default hardcoded library path. In most cases,
 # this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi],[])
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
+])# _LT_SYS_MODULE_PATH_AIX
 
 
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
 [ifdef([AC_DIVERSION_NOTICE],
 	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
 	 [AC_DIVERT_PUSH(NOTICE)])
 $1
 AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
+])# _LT_SHELL_INIT
 
 
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
 # Add some code to the start of the generated configure script which
 # will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X[$]1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X[$]1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -1730,9 +1098,9 @@ fi
 if test "X[$]1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 [$]*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -1740,124 +1108,127 @@ fi
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
       else
-	# maybe with a smaller string...
-	prev=:
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "[$]0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
 fi
 
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
 
 
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
 [AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -1868,12 +1239,12 @@ ia64-*-hpux*)
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
     esac
   fi
   rm -rf conftest*
@@ -1882,72 +1253,79 @@ ia64-*-hpux*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
   fi
   rm -rf conftest*
   ;;
 
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
     esac
   fi
   rm -rf conftest*
@@ -1959,7 +1337,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
     [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
      AC_LANG_POP])
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
@@ -1974,38 +1352,75 @@ sparc*-*solaris*)
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
       esac
       ;;
     esac
   fi
   rm -rf conftest*
   ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-  ])
 esac
 
 need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
 
-])# _LT_AC_LOCK
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
 
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
 
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
 #		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
 # ----------------------------------------------------------------
 # Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$3"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -2024,40 +1439,47 @@ AC_CACHE_CHECK([$1], [$2],
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 else
-    ifelse([$6], , :, [$6])
+    m4_if([$6], , :, [$6])
 fi
-])# AC_LIBTOOL_COMPILER_OPTION
+])# _LT_COMPILER_OPTION
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
 
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
   [$2=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $3"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
      # The linker can only warn and ignore the option if not recognized
      # So say no if there are warnings
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -2066,22 +1488,28 @@ AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
        $2=yes
      fi
    fi
-   $rm conftest*
+   $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
+    m4_if([$4], , :, [$4])
 else
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 fi
-])# AC_LIBTOOL_LINKER_OPTION
+])# _LT_LINKER_OPTION
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
 
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
@@ -2103,7 +1531,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=-1;
     ;;
 
-  cygwin* | mingw*)
+  cygwin* | mingw* | cegcc*)
     # On Win9x/ME, this test blows up -- it succeeds, but takes
     # about 5 minutes as the teststring grows exponentially.
     # Worse, since 9x/ME are not pre-emptively multitasking,
@@ -2158,30 +1586,41 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
     ;;
   *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      teststring=$teststring$teststring
-    done
-    teststring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
     ;;
   esac
 ])
@@ -2190,27 +1629,35 @@ if test -n $lt_cv_sys_max_cmd_len ; then
 else
   AC_MSG_RESULT(none)
 fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
 
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
 
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
 
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "$cross_compiling" = yes; then :
   [$4]
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
+  cat > conftest.$ac_ext <<_LT_EOF
 [#line __oline__ "configure"
 #include "confdefs.h"
 
@@ -2252,10 +1699,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -2271,9 +1714,9 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }]
-EOF
+_LT_EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
@@ -2288,13 +1731,13 @@ EOF
   fi
 fi
 rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
+])# _LT_TRY_DLOPEN_SELF
 
 
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
@@ -2310,15 +1753,15 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   darwin*)
   # if libdl is installed we need to link against it
@@ -2328,13 +1771,13 @@ else
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ])
-   ;;
+    ;;
 
   *)
     AC_CHECK_FUNC([shl_load],
 	  [lt_cv_dlopen="shl_load"],
       [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
 	[AC_CHECK_FUNC([dlopen],
 	      [lt_cv_dlopen="dlopen"],
 	  [AC_CHECK_LIB([dl], [dlopen],
@@ -2342,7 +1785,7 @@ else
 	    [AC_CHECK_LIB([svld], [dlopen],
 		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
 	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
 	      ])
 	    ])
 	  ])
@@ -2370,7 +1813,7 @@ else
 
     AC_CACHE_CHECK([whether a program can dlopen itself],
 	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
 	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
     ])
@@ -2378,8 +1821,8 @@ else
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
 	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
       ])
@@ -2401,22 +1844,36 @@ else
   *) enable_dlopen_self_static=unknown ;;
   esac
 fi
-])# AC_LIBTOOL_DLOPEN_SELF
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
 
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
 AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -2436,37 +1893,41 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
      fi
    fi
    chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $rm conftest*
+   $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
    cd ..
-   rmdir conftest
-   $rm conftest*
+   $RM -r conftest
+   $RM conftest*
 ])
-])# AC_LIBTOOL_PROG_CC_C_O
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
 
 
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
 # Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
 
 hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING([if we can lock with hard links])
   hard_links=yes
-  $rm conftest*
+  $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -2479,12 +1940,13 @@ if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks"
 else
   need_locks=no
 fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
 
 
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
 [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
 [rm -f .libs 2>/dev/null
 mkdir .libs 2>/dev/null
@@ -2496,40 +1958,46 @@ else
 fi
 rmdir .libs 2>/dev/null])
 objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
 
 
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
 # Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
     # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+    _LT_TAGVAR(hardcode_action, $1)=relink
   else
     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+    _LT_TAGVAR(hardcode_action, $1)=immediate
   fi
 else
   # We cannot hardcode anything, or else we can only hardcode existing
   # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
 fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -2537,43 +2005,107 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
 
 
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
 old_striplib=
 AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
   AC_MSG_RESULT([yes])
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         AC_MSG_RESULT([yes])
-       else
-  AC_MSG_RESULT([no])
-fi
-       ;;
-   *)
-  AC_MSG_RESULT([no])
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
     ;;
   esac
 fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
 
 
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# _LT_SYS_DYNAMIC_LINKER([TAG])
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -2587,20 +2119,6 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -2618,7 +2136,7 @@ aix3*)
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[[4-9]]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -2637,7 +2155,7 @@ aix4* | aix5*)
       aix4 | aix4.[[01]] | aix4.[[01]].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
@@ -2663,9 +2181,18 @@ aix4* | aix5*)
   ;;
 
 amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
   ;;
 
 beos*)
@@ -2688,25 +2215,28 @@ bsdi[[45]]*)
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
-       $rm \$dlpath'
+       $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
@@ -2715,20 +2245,20 @@ cygwin* | mingw* | pw32*)
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
         # It is most probably a Windows format PATH printed by
         # mingw gcc, but we are running on Cygwin. Gcc prints its search
         # path with ; separators, and with drive letters. We can handle the
         # drive letters (cygwin fileutils understands them), so leave them,
         # especially as we might pass files found there to a mingw objdump,
         # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
       ;;
     pw32*)
@@ -2752,17 +2282,13 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -2779,18 +2305,6 @@ freebsd1*)
   dynamic_linker=no
   ;;
 
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -2828,7 +2342,7 @@ freebsd* | dragonfly*)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
-  freebsd*) # from 4.6 on
+  *) # from 4.6 on, and DragonFly
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
@@ -2867,18 +2381,18 @@ hpux9* | hpux10* | hpux11*)
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
@@ -2891,7 +2405,7 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[[3-9]]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -2946,7 +2460,7 @@ linux*oldld* | linux*aout* | linux*coff*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -2955,15 +2469,29 @@ linux*)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
+
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -2975,23 +2503,11 @@ linux*)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-knetbsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
@@ -3012,14 +2528,16 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx*)
-  version_type=linux
+*nto* | *qnx*)
+  version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
@@ -3028,13 +2546,13 @@ openbsd*)
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[[89]] | openbsd2.[[89]].*)
 	shlibpath_overrides_runpath=no
@@ -3068,6 +2586,10 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
+rdos*)
+  dynamic_linker=no
+  ;;
+
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -3102,7 +2624,6 @@ sysv4 | sysv4.3*)
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
@@ -3133,13 +2654,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -3149,6 +2669,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -3167,276 +2698,54 @@ variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-        [include additional configurations @<:@automatic@:>@])],
-    [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
 
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  AC_LIBTOOL_LANG_CXX_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-	  AC_LIBTOOL_LANG_F77_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-	  AC_LIBTOOL_LANG_GCJ_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
 
-# AC_LIBTOOL_PICMODE([MODE])
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
 # --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
 AC_MSG_CHECKING([for $1])
 AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 [case $MAGIC_CMD in
@@ -3449,7 +2758,7 @@ AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 dnl $ac_dummy forces splitting on constant user-supplied paths.
 dnl POSIX.2 word splitting is done only on the output of word expansions,
 dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
   for ac_dir in $ac_dummy; do
     IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
@@ -3464,7 +2773,7 @@ dnl not every word.  This closes a longstanding sh security hole.
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -3475,7 +2784,7 @@ dnl not every word.  This closes a longstanding sh security hole.
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -3492,37 +2801,47 @@ if test -n "$MAGIC_CMD"; then
 else
   AC_MSG_RESULT(no)
 fi
-])# AC_PATH_TOOL_PREFIX
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
 
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
 
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
   else
     MAGIC_CMD=:
   fi
 fi
-])# AC_PATH_MAGIC
+])# _LT_PATH_MAGIC
 
 
-# AC_PROG_LD
+# LT_PATH_LD
 # ----------
 # find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
@@ -3539,9 +2858,9 @@ if test "$GCC" = yes; then
     [[\\/]]* | ?:[[\\/]]*)
       re_direlt='/[[^/]][[^/]]*/\.\./'
       # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -3591,15 +2910,24 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
 
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
 
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
 [# I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
@@ -3610,14 +2938,14 @@ case `$LD -v 2>&1 </dev/null` in
   ;;
 esac])
 with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
+])# _LT_PATH_LD_GNU
 
 
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
+# _LT_CMD_RELOAD
+# --------------
 # find reload flag for linker
 #   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+m4_defun([_LT_CMD_RELOAD],
 [AC_CACHE_CHECK([for $LD option to reload object files],
   lt_cv_ld_reload_flag,
   [lt_cv_ld_reload_flag='-r'])
@@ -3636,15 +2964,19 @@ case $host_os in
     fi
     ;;
 esac
-])# AC_PROG_LD_RELOAD_FLAG
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
 
 
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
 # how to check for library dependencies
 #  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
 lt_cv_deplibs_check_method,
 [lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -3661,7 +2993,7 @@ lt_cv_deplibs_check_method='unknown'
 # whether `pass_all' will *always* work, you probably want this one.
 
 case $host_os in
-aix4* | aix5*)
+aix[[4-9]]*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -3683,8 +3015,20 @@ cygwin*)
 
 mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
   ;;
 
@@ -3692,8 +3036,8 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | kfreebsd*-gnu | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
@@ -3730,7 +3074,7 @@ hpux10.20* | hpux11*)
   esac
   ;;
 
-interix3*)
+interix[[3-9]]*)
   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
   lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
   ;;
@@ -3746,12 +3090,12 @@ irix5* | irix6* | nonstopux*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -3764,12 +3108,12 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -3780,10 +3124,18 @@ osf3* | osf4* | osf5*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
@@ -3811,7 +3163,7 @@ sysv4 | sysv4.3*)
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -3819,20 +3171,26 @@ esac
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
+
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
 
 
-# AC_PROG_NM
+# LT_PATH_NM
 # ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
   lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then 
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
@@ -3868,16 +3226,51 @@ else
     done
     IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  : ${lt_cv_path_NM=no}
 fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
 
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
 
-# AC_CHECK_LIBM
-# -------------
+
+# LT_LIB_M
+# --------
 # check for math library
-AC_DEFUN([AC_CHECK_LIBM],
+AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
@@ -3892,2104 +3285,46 @@ case $host in
   AC_CHECK_LIB(m, cos, LIBM="-lm")
   ;;
 esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!).  If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, lt_dlinit,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  AC_PROG_LD
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-    # as there is no search path for DLLs.
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-        case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-        esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes ; then
-      lt_int_apple_cc_single_mod=no
-      output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-       lt_int_apple_cc_single_mod=yes
-      fi
-      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      else
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-        fi
-        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          else
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          fi
-            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[[12]]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd* | kfreebsd*-gnu | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    aCC*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-      case $host_cpu in
-      hppa*64*|ia64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-        ;;
-      *)
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-    *)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
-    esac
-
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    hppa*64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    *)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  interix3*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC*)
-        # Portland Group C++ compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  openbsd*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    fi
-    output_verbose_link_cmd='echo'
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker. We must also pass each convience library through
-	    # to the system linker between allextract/defaultextract.
-	    # The C++ compiler will combine linker options so we
-	    # cannot just pass the convience library names through
-	    # without $wl.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix3*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_AC_TAGVAR(predep_objects,$1)=
-  _LT_AC_TAGVAR(postdep_objects,$1)=
-  _LT_AC_TAGVAR(postdeps,$1)=
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
-    ;;
-  esac
-  ;;
-esac
-])
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="      program t\n      end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(hardcode_automatic, $1) \
-    _LT_AC_TAGVAR(module_cmds, $1) \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(module_cmds, $1) | \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
-
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+AC_SUBST([LIBM])
+])# LT_LIB_M
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
 
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
     [-fno-rtti -fno-exceptions], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
 fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
 
 
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 AC_MSG_CHECKING([command to parse $NM output from $compiler object])
 AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
@@ -6003,33 +3338,18 @@ symcode='[[BCDEGRST]]'
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
 # Define system-specific variables.
 case $host_os in
 aix*)
   symcode='[[BCDT]]'
   ;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   symcode='[[ABCDGISTW]]'
   ;;
-hpux*) # Its linker distinguishes data from code symbols
+hpux*)
   if test "$host_cpu" = ia64; then
     symcode='[[ABCDEGRST]]'
   fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDGIRSTW]]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
   ;;
 irix* | nonstopux*)
   symcode='[[BCDEGRST]]'
@@ -6054,44 +3374,72 @@ sysv4)
   ;;
 esac
 
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
 # Handle CRLF in mingw tool chain
 opt_cr=
 case $build_os in
 mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
   ;;
 esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
+# Try without a prefix underscore, then with it.
 for ac_symprfx in "" "_"; do
 
   # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
   symxfrm="\\1 $ac_symprfx\\2 \\2"
 
   # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
 
   # Check to see that the pipe works correctly.
   pipe_works=no
 
   rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
+  cat > conftest.$ac_ext <<_LT_EOF
 #ifdef __cplusplus
 extern "C" {
 #endif
 char nm_test_var;
-void nm_test_func(){}
+void nm_test_func(void);
+void nm_test_func(void){}
 #ifdef __cplusplus
 }
 #endif
 int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+_LT_EOF
 
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
@@ -6105,48 +3453,50 @@ EOF
       fi
 
       # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-EOF
+_LT_EOF
 	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
+	  cat <<_LT_EOF >> conftest.$ac_ext
 
-/* The mapping between symbol names and symbols. */
+/* The mapping between symbol names and symbols.  */
 const struct {
   const char *name;
-  lt_ptr_t address;
+  void       *address;
 }
-lt_preloaded_symbols[[]] =
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
 {
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
 };
 
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
 #ifdef __cplusplus
 }
 #endif
-EOF
+_LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_save_LIBS="$LIBS"
 	  lt_save_CFLAGS="$CFLAGS"
 	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
 	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
@@ -6165,7 +3515,7 @@ EOF
     echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
     cat conftest.$ac_ext >&5
   fi
-  rm -f conftest* conftst*
+  rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
   if test "$pipe_works" = yes; then
@@ -6183,141 +3533,162 @@ if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; the
 else
   AC_MSG_RESULT(ok)
 fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
 
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
 
 AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
+m4_if([$1], [CXX], [
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
+
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
-    mingw* | os2* | pw32*)
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
     *djgpp*)
       # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
-    interix3*)
+    interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
       fi
       ;;
     hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
       case $host_cpu in
-      hppa*64*|ia64*)
+      hppa*64*)
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	;;
       esac
       ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
   else
     case $host_os in
-      aix4* | aix5*)
+      aix[[4-9]]*)
 	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
 	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
 	fi
 	;;
       chorus*)
 	case $cc_basename in
 	cxch68*)
 	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
 	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           ;;
-         esac
-       ;;
       dgux*)
 	case $cc_basename in
 	  ec++*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
 	  ghcx*)
 	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
-      freebsd* | kfreebsd*-gnu | dragonfly*)
+      freebsd* | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
 	case $cc_basename in
 	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	    fi
 	    ;;
 	  aCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
 	      ;;
 	    *)
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	      ;;
 	    esac
 	    ;;
@@ -6332,41 +3703,62 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       irix5* | irix6* | nonstopux*)
 	case $cc_basename in
 	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    # CC pic flag -KPIC is the default.
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
-      linux*)
+      linux* | k*bsd*-gnu)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
-	  pgCC*)
-	    # Portland Group C++ compiler.
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	  cxx*)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	    ;;
 	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
 	    ;;
 	esac
 	;;
@@ -6377,7 +3769,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       mvs*)
 	case $cc_basename in
 	  cxx*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
 	    ;;
 	  *)
 	    ;;
@@ -6385,22 +3777,27 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       netbsd*)
 	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
 	  KCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    ;;
 	  RCC*)
 	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  cxx*)
 	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
 	  *)
 	    ;;
@@ -6412,13 +3809,13 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	case $cc_basename in
 	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	    ;;
 	  gcx*)
 	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	    ;;
 	  *)
 	    ;;
@@ -6428,82 +3825,107 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	case $cc_basename in
 	  CC*)
 	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	  lcc*)
 	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
       tandem*)
 	case $cc_basename in
 	  NCC*)
 	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
       vxworks*)
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
 	;;
     esac
   fi
 ],
 [
   if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
 
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
-    interix3*)
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -6511,64 +3933,48 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       enable_shared=no
       ;;
 
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
       fi
       ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
     aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       esac
-       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
       case $host_cpu in
@@ -6576,210 +3982,274 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	# +Z the default
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       case $cc_basename in
-      icc* | ecc*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
         ;;
       ccc*)
-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
         # All Alpha code is PIC.
-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	esac
+	;;
       esac
       ;;
 
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
     osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
       f77* | f90* | f95*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
       esac
       ;;
 
     sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     unicos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
 
     uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
     esac
   fi
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
 case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
     ;;
   *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
 
 #
 # Check to make sure the static flag actually works.
 #
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
   $lt_tmp_static_flag,
   [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
 
 
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
 # See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
-  aix4* | aix5*)
+  aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
-  cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+  cygwin* | mingw* | cegcc*)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   esac
-],[
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
   runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-  _LT_AC_TAGVAR(module_cmds, $1)=
-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
   # include_expsyms should be a list of space-separated symbols to be *always*
   # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
+  _LT_TAGVAR(include_expsyms, $1)=
   # exclude_expsyms can be an extended regexp of symbols to exclude
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
   extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  _LT_CC_BASENAME([$compiler])
+
   case $host_os in
-  cygwin* | mingw* | pw32*)
+  cygwin* | mingw* | pw32* | cegcc*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
@@ -6796,7 +4266,7 @@ ifelse([$1],[CXX],[
     ;;
   esac
 
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  _LT_TAGVAR(ld_shlibs, $1)=yes
   if test "$with_gnu_ld" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
@@ -6805,16 +4275,16 @@ ifelse([$1],[CXX],[
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
+    case `$LD -v 2>&1` in
       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -6824,11 +4294,11 @@ ifelse([$1],[CXX],[
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[[3-9]]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
@@ -6836,49 +4306,50 @@ ifelse([$1],[CXX],[
 *** really care for shared libraries, you may want to modify your PATH
 *** so that a non-GNU linker is found, and then restart.
 
-EOF
+_LT_EOF
       fi
       ;;
 
     amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
       ;;
 
     beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
 	  cp $export_symbols $output_objdir/$soname.def;
 	else
 	  echo EXPORTS > $output_objdir/$soname.def;
@@ -6886,70 +4357,109 @@ EOF
 	fi~
 	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
-    interix3*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
 	tmp_addflag=
+	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
 	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
 	  tmp_addflag=' -i_dynamic -nofor_main' ;;
 	ifc* | ifort*)			# Intel Fortran compiler
 	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
 	esac
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+        _LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
     solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
 *** create shared libraries on Solaris systems.  Therefore, libtool
@@ -6958,19 +4468,19 @@ EOF
 *** your PATH or compiler configuration so that the native linker is
 *** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
       case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) 
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
@@ -6983,58 +4493,62 @@ EOF
 _LT_EOF
 	;;
 	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
-	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
 	;;
       esac
       ;;
 
     sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
     esac
 
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
       runpath_var=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
     case $host_os in
     aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
       if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[[4-9]]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -7044,22 +4558,22 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
 	  done
 	  ;;
 	esac
@@ -7074,30 +4588,32 @@ _LT_EOF
       # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
       # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
       if test "$GCC" = yes; then
 	case $host_os in aix4.[[012]]|aix4.[[012]].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
-  	  # We have reworked collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  # We have reworked collect2
+	  :
 	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
 	  fi
 	  ;;
 	esac
@@ -7108,8 +4624,8 @@ _LT_EOF
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
 	  if test "$aix_use_runtimelinking" = yes; then
@@ -7120,130 +4636,94 @@ _LT_EOF
 	fi
       fi
 
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(always_export_symbols, $1)=yes
       if test "$aix_use_runtimelinking" = yes; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       _LT_AC_SYS_LIBPATH_AIX
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
 	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
 	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
 
     amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
       ;;
 
     bsdi[[45]]*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
       ;;
 
-    cygwin* | mingw* | pw32*)
+    cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
       # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
     darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-    fi
+      _LT_DARWIN_LINKER_FEATURES($1)
       ;;
 
     dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      _LT_TAGVAR(ld_shlibs, $1)=no
       ;;
 
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
@@ -7251,60 +4731,60 @@ _LT_EOF
     # does not break anything, and helps significantly (at the cost of a little
     # extra space).
     freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
     freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    freebsd* | dragonfly*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     hpux9*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       ;;
 
     hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
       if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
-	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
       fi
       ;;
 
@@ -7312,45 +4792,45 @@ _LT_EOF
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	case $host_cpu in
 	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
 	  ;;
 	esac
       fi
@@ -7358,191 +4838,221 @@ _LT_EOF
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        AC_LINK_IFELSE(int foo(void) {},
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+        )
+        LDFLAGS="$save_LDFLAGS"
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
     netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
       ;;
 
     openbsd*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
       else
-       case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	   ;;
-	 *)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
-	wlarc=''
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       case $host_os in
       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
       *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
       esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
     sunos4*)
       if test "x$host_vendor" = xsequent; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     sysv4)
       case $host_vendor in
 	sni)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
 	;;
 	siemens)
 	  ## LD is ld it makes a PLAMLIB
 	  ## CC just makes a GrossModule.
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
         ;;
 	motorola)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
 	;;
       esac
       runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	runpath_var=LD_RUN_PATH
 	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
       fi
       ;;
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -7553,50 +5063,65 @@ _LT_EOF
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      _LT_TAGVAR(ld_shlibs, $1)=no
       ;;
     esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
   fi
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
 
 #
 # Do we need to explicitly link libc?
 #
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
 x|xyes)
   # Assume -lc should be added
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
   if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    case $_LT_TAGVAR(archive_cmds, $1) in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
       ;;
@@ -7605,119 +5130,1924 @@ x|xyes)
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
       AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
         soname=conftest
         lib=conftest
         libobjs=conftest.$ac_objext
         deplibs=
-        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
         compiler_flags=-v
         linker_flags=-v
         verstring=
         output_objdir=.
         libname=conftest
-        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+        _LT_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
         then
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
         else
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
         fi
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
       else
         cat conftest.err 1>&5
       fi
-      $rm conftest*
-      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      $RM conftest*
+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
       ;;
     esac
   fi
   ;;
 esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
 
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+    [[If ld is used when linking, flag to hardcode $libdir into a binary
+    during linking.  This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+    [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
 
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
 
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+        # as there is no search path for DLLs.
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+        _LT_TAGVAR(always_export_symbols, $1)=no
+        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+          # If the export-symbols file already is a .def file (1st line
+          # is EXPORTS), use it as is; otherwise, prepend...
+          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    cp $export_symbols $output_objdir/$soname.def;
+          else
+	    echo EXPORTS > $output_objdir/$soname.def;
+	    cat $export_symbols >> $output_objdir/$soname.def;
+          fi~
+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        else
+          _LT_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd[[12]]*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      gnu*)
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 will use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  xl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='echo'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=echo
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='echo'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
 # ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
 
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $p in
 
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
 
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
 
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
 ])
 
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${F77-"f77"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${FC-"f95"}
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
 ])
 
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
 # NOTE: This macro has been submitted for inclusion into   #
 #  GNU Autoconf as AC_PROG_SED.  When it is available in   #
 #  a released version of Autoconf we should remove this    #
 #  macro and use it instead.                               #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
+
+m4_defun([AC_PROG_SED],
 [AC_MSG_CHECKING([for a sed that does not truncate output])
 AC_CACHE_VAL(lt_cv_path_SED,
 [# Loop through the user's path and test for sed and gsed.
@@ -7735,6 +7065,7 @@ do
     done
   done
 done
+IFS=$as_save_IFS
 lt_ac_max=0
 lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
@@ -7767,9 +7098,876 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
 done
 ])
 SED=$lt_cv_path_SED
+AC_SUBST([SED])
 AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $[*] ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
+
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$[@]"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]+=\$[2]"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]=\$$[1]\$[2]"
+}
+
+_LT_EOF
+    ;;
+  esac
+])
+
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
 ])
 
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
+
+
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [0], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
+
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# Generated from ltversion.in.
+
+# serial 3012 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.2.6])
+m4_define([LT_PACKAGE_REVISION], [1.3012])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.2.6'
+macro_revision='1.3012'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
+
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 4 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+
 # pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
 # 
 # Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
@@ -7803,7 +8001,7 @@ if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
 	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
 fi
 if test -n "$PKG_CONFIG"; then
-	_pkg_min_version=m4_ifval([$1], [$1], [0.9.0])
+	_pkg_min_version=m4_default([$1], [0.9.0])
 	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
 	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
 		AC_MSG_RESULT([yes])
@@ -7838,15 +8036,29 @@ fi])
 # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
 # ---------------------------------------------
 m4_define([_PKG_CONFIG],
-[if test -n "$PKG_CONFIG"; then
-        PKG_CHECK_EXISTS([$3],
-                         [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
-			 [pkg_failed=yes])
-else
-	pkg_failed=untried
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
 fi[]dnl
 ])# _PKG_CONFIG
 
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
 # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
 # [ACTION-IF-NOT-FOUND])
 #
@@ -7868,31 +8080,41 @@ AC_MSG_CHECKING([for $1])
 _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
 _PKG_CONFIG([$1][_LIBS], [libs], [$2])
 
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
 if test $pkg_failed = yes; then
-	$1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
+        fi
 	# Put the nasty error message in config.log where it belongs
-	echo "$$1[]_PKG_ERRORS" 1>&AS_MESSAGE_LOG_FD
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
 
 	ifelse([$4], , [AC_MSG_ERROR(dnl
-[Package requirements ($2) were not met.
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
 Consider adjusting the PKG_CONFIG_PATH environment variable if you
 installed software in a non-standard prefix.
 
-Alternatively you may set the $1_CFLAGS and $1_LIBS environment variables
-to avoid the need to call pkg-config.  See the pkg-config man page for
-more details.])],
-		[$4])
+_PKG_TEXT
+])],
+		[AC_MSG_RESULT([no])
+                $4])
 elif test $pkg_failed = untried; then
 	ifelse([$4], , [AC_MSG_FAILURE(dnl
 [The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
-Alternatively you may set the $1_CFLAGS and $1_LIBS environment variables
-to avoid the need to call pkg-config.  See the pkg-config man page for
-more details.
+_PKG_TEXT
 
-To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.])],
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],
 		[$4])
 else
 	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
@@ -7902,3 +8124,1549 @@ else
 fi[]dnl
 ])# PKG_CHECK_MODULES
 
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well.  Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+       [enable], [m4_define([am_maintainer_other], [disable])],
+       [disable], [m4_define([am_maintainer_other], [enable])],
+       [m4_define([am_maintainer_other], [enable])
+        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+  AC_ARG_ENABLE([maintainer-mode],
+[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
+			  (and sometimes confusing) to the casual installer],
+      [USE_MAINTAINER_MODE=$enableval],
+      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST([MAINT])dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# (`yes' being less verbose, `no' or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules],
+[  --enable-silent-rules          less verbose build output (undo: `make V=1')
+  --disable-silent-rules         verbose build output (undo: `make V=0')])
+case $enable_silent_rules in
+yes) AM_DEFAULT_VERBOSITY=0;;
+no)  AM_DEFAULT_VERBOSITY=1;;
+*)   AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+dnl xorg-macros.m4.  Generated from xorg-macros.m4.in xorgversion.m4 by configure.
+dnl
+dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
+dnl 
+dnl Permission is hereby granted, free of charge, to any person obtaining a
+dnl copy of this software and associated documentation files (the
+dnl "Software"), to deal in the Software without restriction, including
+dnl without limitation the rights to use, copy, modify, merge, publish,
+dnl distribute, and/or sell copies of the Software, and to permit persons
+dnl to whom the Software is furnished to do so, provided that the above
+dnl copyright notice(s) and this permission notice appear in all copies of
+dnl the Software and that both the above copyright notice(s) and this
+dnl permission notice appear in supporting documentation.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of a copyright holder
+dnl shall not be used in advertising or otherwise to promote the sale, use
+dnl or other dealings in this Software without prior written authorization
+dnl of the copyright holder.
+
+# XORG_MACROS_VERSION(required-version)
+# -------------------------------------
+# Minimum version: 1.1.0
+#
+# If you're using a macro added in Version 1.1 or newer, include this in
+# your configure.ac with the minimum required version, such as:
+# XORG_MACROS_VERSION(1.1)
+#
+# To ensure that this macro is defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION],
+#     [m4_fatal([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+#
+#
+# See the "minimum version" comment for each macro you use to see what 
+# version you require.
+m4_defun([XORG_MACROS_VERSION],[
+m4_define([vers_have], [1.2.2])
+m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
+m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
+m4_if(m4_cmp(maj_have, maj_needed), 0,,
+    [m4_fatal([xorg-macros major version ]maj_needed[ is required but ]vers_have[ found])])
+m4_if(m4_version_compare(vers_have, [$1]), -1,
+    [m4_fatal([xorg-macros version $1 or higher is required but ]vers_have[ found])])
+m4_undefine([vers_have])
+m4_undefine([maj_have])
+m4_undefine([maj_needed])
+]) # XORG_MACROS_VERSION
+
+# XORG_PROG_RAWCPP()
+# ------------------
+# Minimum version: 1.0.0
+#
+# Find cpp program and necessary flags for use in pre-processing text files
+# such as man pages and config files
+AC_DEFUN([XORG_PROG_RAWCPP],[
+AC_REQUIRE([AC_PROG_CPP])
+AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}], 
+   [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])
+
+# Check for flag to avoid builtin definitions - assumes unix is predefined,
+# which is not the best choice for supporting other OS'es, but covers most
+# of the ones we need for now.
+AC_MSG_CHECKING([if $RAWCPP requires -undef])
+AC_LANG_CONFTEST([Does cpp redefine unix ?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS=-undef
+		AC_MSG_RESULT([yes])
+	# under Cygwin unix is still defined even with -undef
+	elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS="-undef -ansi"
+		AC_MSG_RESULT([yes, with -ansi])
+	else
+		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+
+AC_MSG_CHECKING([if $RAWCPP requires -traditional])
+AC_LANG_CONFTEST([Does cpp preserve   "whitespace"?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+AC_SUBST(RAWCPPFLAGS)
+]) # XORG_PROG_RAWCPP
+
+# XORG_MANPAGE_SECTIONS()
+# -----------------------
+# Minimum version: 1.0.0
+#
+# Determine which sections man pages go in for the different man page types
+# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
+# Not sure if there's any better way than just hardcoding by OS name.
+# Override default settings by setting environment variables
+
+AC_DEFUN([XORG_MANPAGE_SECTIONS],[
+AC_REQUIRE([AC_CANONICAL_HOST])
+
+if test x$APP_MAN_SUFFIX = x    ; then
+    APP_MAN_SUFFIX=1
+fi
+if test x$APP_MAN_DIR = x    ; then
+    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
+fi
+
+if test x$LIB_MAN_SUFFIX = x    ; then
+    LIB_MAN_SUFFIX=3
+fi
+if test x$LIB_MAN_DIR = x    ; then
+    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
+fi
+
+if test x$FILE_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	FILE_MAN_SUFFIX=4  ;;
+	*)		FILE_MAN_SUFFIX=5  ;;
+    esac
+fi
+if test x$FILE_MAN_DIR = x    ; then
+    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
+fi
+
+if test x$MISC_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	MISC_MAN_SUFFIX=5  ;;
+	*)		MISC_MAN_SUFFIX=7  ;;
+    esac
+fi
+if test x$MISC_MAN_DIR = x    ; then
+    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
+fi
+
+if test x$DRIVER_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
+	*)		DRIVER_MAN_SUFFIX=4  ;;
+    esac
+fi
+if test x$DRIVER_MAN_DIR = x    ; then
+    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
+fi
+
+if test x$ADMIN_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	ADMIN_MAN_SUFFIX=1m ;;
+	*)		ADMIN_MAN_SUFFIX=8  ;;
+    esac
+fi
+if test x$ADMIN_MAN_DIR = x    ; then
+    ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
+fi
+
+
+AC_SUBST([APP_MAN_SUFFIX])
+AC_SUBST([LIB_MAN_SUFFIX])
+AC_SUBST([FILE_MAN_SUFFIX])
+AC_SUBST([MISC_MAN_SUFFIX])
+AC_SUBST([DRIVER_MAN_SUFFIX])
+AC_SUBST([ADMIN_MAN_SUFFIX])
+AC_SUBST([APP_MAN_DIR])
+AC_SUBST([LIB_MAN_DIR])
+AC_SUBST([FILE_MAN_DIR])
+AC_SUBST([MISC_MAN_DIR])
+AC_SUBST([DRIVER_MAN_DIR])
+AC_SUBST([ADMIN_MAN_DIR])
+]) # XORG_MANPAGE_SECTIONS
+
+# XORG_CHECK_LINUXDOC
+# -------------------
+# Minimum version: 1.0.0
+#
+# Defines the variable MAKE_TEXT if the necessary tools and
+# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
+# Whether or not the necessary tools and files are found can be checked
+# with the AM_CONDITIONAL "BUILD_LINUXDOC"
+AC_DEFUN([XORG_CHECK_LINUXDOC],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+
+if test x"$cross_compiling" = x"yes" ; then
+  HAVE_DEFS_ENT=no
+else
+  AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+fi
+
+AC_PATH_PROG(LINUXDOC, linuxdoc)
+AC_PATH_PROG(PS2PDF, ps2pdf)
+
+AC_MSG_CHECKING([Whether to build documentation])
+
+if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
+   BUILDDOC=yes
+else
+   BUILDDOC=no
+fi
+
+AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])
+
+AC_MSG_RESULT([$BUILDDOC])
+
+AC_MSG_CHECKING([Whether to build pdf documentation])
+
+if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
+   BUILDPDFDOC=yes
+else
+   BUILDPDFDOC=no
+fi
+
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
+MAKE_PDF="$PS2PDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_LINUXDOC
+
+# XORG_CHECK_DOCBOOK
+# -------------------
+# Minimum version: 1.0.0
+#
+# Checks for the ability to build output formats from SGML DocBook source.
+# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
+# indicates whether the necessary tools and files are found and, if set,
+# $(MAKE_XXX) blah.sgml will produce blah.xxx.
+AC_DEFUN([XORG_CHECK_DOCBOOK],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+BUILDTXTDOC=no
+BUILDPDFDOC=no
+BUILDPSDOC=no
+BUILDHTMLDOC=no
+
+AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+
+AC_PATH_PROG(DOCBOOKPS, docbook2ps)
+AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
+AC_PATH_PROG(DOCBOOKHTML, docbook2html)
+AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
+
+AC_MSG_CHECKING([Whether to build text documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
+   test x$BUILD_TXTDOC != xno; then
+	BUILDTXTDOC=yes
+fi
+AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
+AC_MSG_RESULT([$BUILDTXTDOC])
+
+AC_MSG_CHECKING([Whether to build PDF documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
+   test x$BUILD_PDFDOC != xno; then
+	BUILDPDFDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+AC_MSG_CHECKING([Whether to build PostScript documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
+   test x$BUILD_PSDOC != xno; then
+	BUILDPSDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
+AC_MSG_RESULT([$BUILDPSDOC])
+
+AC_MSG_CHECKING([Whether to build HTML documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
+   test x$BUILD_HTMLDOC != xno; then
+	BUILDHTMLDOC=yes
+fi
+AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
+AC_MSG_RESULT([$BUILDHTMLDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
+MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_DOCBOOK
+
+# XORG_CHECK_MALLOC_ZERO
+# ----------------------
+# Minimum version: 1.0.0
+#
+# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
+# malloc(0) returns NULL.  Packages should add one of these cflags to
+# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
+AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
+AC_ARG_ENABLE(malloc0returnsnull,
+	AC_HELP_STRING([--enable-malloc0returnsnull],
+		       [malloc(0) returns NULL (default: auto)]),
+	[MALLOC_ZERO_RETURNS_NULL=$enableval],
+	[MALLOC_ZERO_RETURNS_NULL=auto])
+
+AC_MSG_CHECKING([whether malloc(0) returns NULL])
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
+	AC_RUN_IFELSE([
+char *malloc();
+char *realloc();
+char *calloc();
+main() {
+    char *m0, *r0, *c0, *p;
+    m0 = malloc(0);
+    p = malloc(10);
+    r0 = realloc(p,0);
+    c0 = calloc(0);
+    exit(m0 == 0 || r0 == 0 || c0 == 0 ? 0 : 1);
+}],
+		[MALLOC_ZERO_RETURNS_NULL=yes],
+		[MALLOC_ZERO_RETURNS_NULL=no])
+fi
+AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])
+
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
+	MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
+	XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
+	XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
+else
+	MALLOC_ZERO_CFLAGS=""
+	XMALLOC_ZERO_CFLAGS=""
+	XTMALLOC_ZERO_CFLAGS=""
+fi
+
+AC_SUBST([MALLOC_ZERO_CFLAGS])
+AC_SUBST([XMALLOC_ZERO_CFLAGS])
+AC_SUBST([XTMALLOC_ZERO_CFLAGS])
+]) # XORG_CHECK_MALLOC_ZERO
+
+# XORG_WITH_LINT()
+# ----------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for source checkers such as lint and sparse if --with-lint
+# is specified.   (Use --with-lint=sparse for sparse.)
+# Sets $LINT to name of source checker passed with --with-lint (default: lint)
+# Sets $LINT_FLAGS to flags to pass to source checker
+# Sets LINT automake conditional if enabled (default: disabled)
+#
+AC_DEFUN([XORG_WITH_LINT],[
+
+# Allow checking code with lint, sparse, etc.
+AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
+		[Use a lint-style source code checker (default: disabled)])],
+		[use_lint=$withval], [use_lint=no])
+if test "x$use_lint" = "xyes" ; then
+	LINT="lint"
+else
+	LINT="$use_lint"
+fi
+if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
+    case $LINT in
+	lint|*/lint)
+	    case $host_os in
+		solaris*)
+			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
+			;;
+	    esac
+	    ;;
+    esac
+fi
+
+AC_SUBST(LINT)
+AC_SUBST(LINT_FLAGS)
+AM_CONDITIONAL(LINT, [test x$LINT != xno])
+
+]) # XORG_WITH_LINT
+
+# XORG_LINT_LIBRARY(LIBNAME)
+# --------------------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for building lint libraries for checking programs that call
+# functions in the library.
+# Disabled by default, enable with --enable-lint-library
+# Sets: 
+#	@LINTLIB@		- name of lint library file to make
+#	MAKE_LINT_LIB		- automake conditional
+#
+
+AC_DEFUN([XORG_LINT_LIBRARY],[
+AC_REQUIRE([XORG_WITH_LINT])
+# Build lint "library" for more indepth checks of programs calling this library
+AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
+	[Create lint library (default: disabled)])],
+	[make_lint_lib=$enableval], [make_lint_lib=no])
+if test "x$make_lint_lib" != "xno" ; then
+	if test "x$LINT" = "xno" ; then
+		AC_MSG_ERROR([Cannot make lint library without --with-lint])
+	fi
+	if test "x$make_lint_lib" = "xyes" ; then
+		LINTLIB=llib-l$1.ln
+	else
+		LINTLIB=$make_lint_lib
+	fi
+fi
+AC_SUBST(LINTLIB)
+AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
+
+]) # XORG_LINT_LIBRARY
+
+# XORG_CWARNFLAGS
+# ---------------
+# Minimum version: 1.2.0
+#
+# Defines CWARNFLAGS to enable C compiler warnings.
+#
+AC_DEFUN([XORG_CWARNFLAGS], [
+AC_REQUIRE([AC_PROG_CC])
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `$CC -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
+	;;
+    esac
+else
+    AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
+    fi
+fi
+AC_SUBST(CWARNFLAGS)
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+]) # XORG_CWARNFLAGS
+dnl Copyright 2005 Red Hat, Inc
+dnl
+dnl Permission to use, copy, modify, distribute, and sell this software and its
+dnl documentation for any purpose is hereby granted without fee, provided that
+dnl the above copyright notice appear in all copies and that both that
+dnl copyright notice and this permission notice appear in supporting
+dnl documentation.
+dnl
+dnl The above copyright notice and this permission notice shall be included
+dnl in all copies or substantial portions of the Software.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+dnl OTHER DEALINGS IN THE SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of the copyright holders shall
+dnl not be used in advertising or otherwise to promote the sale, use or
+dnl other dealings in this Software without prior written authorization
+dnl from the copyright holders.
+dnl
+
+# XORG_RELEASE_VERSION
+# --------------------
+# Adds --with/without-release-string and changes the PACKAGE and
+# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION".  If
+# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.  Also
+# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
+ 
+AC_DEFUN([XORG_RELEASE_VERSION],[
+	AC_ARG_WITH(release-version,
+			AC_HELP_STRING([--with-release-version=STRING],
+				[Use release version string in package name]),
+			[RELEASE_VERSION="$withval"],
+			[RELEASE_VERSION=""])
+	if test "x$RELEASE_VERSION" != "x"; then
+		PACKAGE="$PACKAGE-$RELEASE_VERSION"
+		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
+		AC_MSG_NOTICE([Building with package name set to $PACKAGE])
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
+		[`echo $PACKAGE_VERSION | cut -d . -f 1`],
+		[Major version of this package])
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
+	if test "x$PVM" = "x"; then
+		PVM="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
+		[$PVM],
+		[Minor version of this package])
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
+	if test "x$PVP" = "x"; then
+		PVP="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
+		[$PVP],
+		[Patch version of this package])
+])
+
+# XORG_CHANGELOG()
+# ----------------
+# Minimum version: 1.2.0
+#
+# Defines the variable CHANGELOG_CMD as the command to generate
+# ChangeLog from git.
+#
+# Arrange that distcleancheck ignores ChangeLog left over by distclean.
+#
+AC_DEFUN([XORG_CHANGELOG], [
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+AC_SUBST([CHANGELOG_CMD])
+AC_SUBST([distcleancheck_listfiles], ['find . -type f ! -name ChangeLog -print'])
+]) # XORG_CHANGELOG
+
diff --git a/libXau/config.guess b/libXau/config.guess
index e3ef63f6c..f32079abd 100644
--- a/libXau/config.guess
+++ b/libXau/config.guess
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2005-12-13'
+timestamp='2008-01-23'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -55,8 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -106,7 +107,7 @@ set_cc_for_build='
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
  { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
@@ -160,6 +161,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -206,8 +208,11 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
     macppc:MirBSD:*:*)
-	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -325,7 +330,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:*)
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
@@ -527,7 +532,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[45])
+    *:AIX:*:[456])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -764,12 +769,19 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
-    i*:MINGW*:*)
+    *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
     i*:windows32*:*)
@@ -779,9 +791,18 @@ EOF
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    x86:Interix*:[345]*)
-	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
-	exit ;;
+    *:Interix*:[3456]*)
+    	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    EM64T | authenticamd)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
@@ -815,6 +836,16 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
@@ -851,7 +882,11 @@ EOF
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^CPU/{s: ::g;p;}'`"
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     mips64:Linux:*:*)
@@ -870,7 +905,11 @@ EOF
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^CPU/{s: ::g;p;}'`"
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     or32:Linux:*:*)
@@ -925,6 +964,9 @@ EOF
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
 	exit ;;
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -967,7 +1009,7 @@ EOF
 	LIBC=gnulibc1
 	# endif
 	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI)
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
@@ -977,7 +1019,11 @@ EOF
 	LIBC=dietlibc
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^LIBC/{s: ::g;p;}'`"
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^LIBC/{
+		s: ::g
+		p
+	    }'`"
 	test x"${LIBC}" != x && {
 		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 		exit
@@ -1179,6 +1225,15 @@ EOF
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
 	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1429,9 +1484,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be
diff --git a/libXau/config.h.in b/libXau/config.h.in
index 7b70c927e..215a7aefc 100644
--- a/libXau/config.h.in
+++ b/libXau/config.h.in
@@ -30,6 +30,10 @@
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
 /* Name of package */
 #undef PACKAGE
 
diff --git a/libXau/config.sub b/libXau/config.sub
index 285164700..6759825a5 100644
--- a/libXau/config.sub
+++ b/libXau/config.sub
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2005-12-11'
+timestamp='2008-01-16'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -71,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -240,15 +241,16 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -268,26 +270,25 @@ case $basic_machine in
 	| mn10200 | mn10300 \
 	| mt \
 	| msp430 \
+	| nios | nios2 \
 	| ns16k | ns32k \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b \
-	| strongarm \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
-	m32c)
-		basic_machine=$basic_machine-unknown
-		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -317,18 +318,18 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
+	| avr-* | avr32-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* | m32rle-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
 	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
@@ -350,28 +351,31 @@ case $basic_machine in
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
+	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-*)
 		;;
-	m32c-*)
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -443,6 +447,14 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
@@ -475,8 +487,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
-		basic_machine=cr16c-unknown
+	cr16)
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -668,6 +680,14 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -683,6 +703,10 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -809,6 +833,14 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -818,6 +850,12 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -904,6 +942,10 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -915,6 +957,9 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@@ -1004,6 +1049,10 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1120,7 +1169,7 @@ case $basic_machine in
 	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1193,7 +1242,8 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
@@ -1208,7 +1258,7 @@ case $os in
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1360,6 +1410,12 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1369,9 +1425,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-    c4x-* | tic4x-*)
-        os=-coff
-        ;;
+        c4x-* | tic4x-*)
+        	os=-coff
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1397,6 +1453,9 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;
diff --git a/libXau/configure b/libXau/configure
index a4c8d35f9..c43c88c12 100644
--- a/libXau/configure
+++ b/libXau/configure
@@ -1,11 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for libXau 1.0.4.
+# Generated by GNU Autoconf 2.63 for libXau 1.0.5.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
@@ -17,7 +17,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -39,17 +39,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -65,8 +93,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -89,7 +115,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -102,17 +128,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -134,7 +153,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
 	    s//\1/
 	    q
@@ -160,7 +179,7 @@ else
   as_have_required=no
 fi
 
-  if test $as_have_required = yes && 	 (eval ":
+  if test $as_have_required = yes &&	 (eval ":
 (as_func_return () {
   (exit \$1)
 }
@@ -242,7 +261,7 @@ IFS=$as_save_IFS
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -263,7 +282,7 @@ _ASEOF
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -343,10 +362,10 @@ fi
 
       if test "x$CONFIG_SHELL" != x; then
   for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+	done
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
 
@@ -415,9 +434,10 @@ fi
 
 test \$exitcode = 0") || {
   echo No shell found that supports shell functions.
-  echo Please tell autoconf@gnu.org about your system,
-  echo including any error possibly output before this
-  echo message
+  echo Please tell bug-autoconf@gnu.org about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
 }
 
 
@@ -453,7 +473,7 @@ test \$exitcode = 0") || {
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -481,7 +501,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -494,19 +513,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -531,10 +553,10 @@ else
   as_test_x='
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+	test -d "$1/.";
       else
 	case $1 in
-        -*)set "./$1";;
+	-*)set "./$1";;
 	esac;
 	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
 	???[sx]*):;;*)false;;esac;fi
@@ -555,22 +577,22 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -580,9 +602,9 @@ fi
 if test "X$1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 $*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -590,121 +612,116 @@ fi
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
       else
-	# maybe with a smaller string...
-	prev=:
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "$0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
 fi
 
 
 
 
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
 exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
@@ -728,8 +745,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='libXau'
 PACKAGE_TARNAME='libXau'
-PACKAGE_VERSION='1.0.4'
-PACKAGE_STRING='libXau 1.0.4'
+PACKAGE_VERSION='1.0.5'
+PACKAGE_STRING='libXau 1.0.5'
 PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
 
 # Factoring default headers for most tests.
@@ -768,140 +785,163 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-am__isrc
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-MAINTAINER_MODE_TRUE
-MAINTAINER_MODE_FALSE
-MAINT
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-LN_S
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-GREP
-EGREP
-ECHO
-AR
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+distcleancheck_listfiles
+CHANGELOG_CMD
+ADMIN_MAN_DIR
+DRIVER_MAN_DIR
+MISC_MAN_DIR
+FILE_MAN_DIR
+LIB_MAN_DIR
+APP_MAN_DIR
+ADMIN_MAN_SUFFIX
+DRIVER_MAN_SUFFIX
+MISC_MAN_SUFFIX
+FILE_MAN_SUFFIX
+LIB_MAN_SUFFIX
+APP_MAN_SUFFIX
+MAKE_LINT_LIB_FALSE
+MAKE_LINT_LIB_TRUE
+LINTLIB
+LINT_FALSE
+LINT_TRUE
+LINT_FLAGS
+LINT
+XAU_LIBS
+XAU_CFLAGS
+PKG_CONFIG
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+CWARNFLAGS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+lt_ECHO
 RANLIB
+AR
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+LIBTOOL
+OBJDUMP
 DLLTOOL
 AS
-OBJDUMP
-CPP
-CXX
-CXXFLAGS
-ac_ct_CXX
-CXXDEPMODE
-am__fastdepCXX_TRUE
-am__fastdepCXX_FALSE
-CXXCPP
-F77
-FFLAGS
-ac_ct_F77
-LIBTOOL
-PKG_CONFIG
-XAU_CFLAGS
-XAU_LIBS
-KERBEROS_TRUE
-KERBEROS_FALSE
-LINT
-LINT_FLAGS
-LINT_TRUE
-LINT_FALSE
-LINTLIB
-MAKE_LINT_LIB_TRUE
-MAKE_LINT_LIB_FALSE
-APP_MAN_SUFFIX
-LIB_MAN_SUFFIX
-FILE_MAN_SUFFIX
-MISC_MAN_SUFFIX
-DRIVER_MAN_SUFFIX
-ADMIN_MAN_SUFFIX
-APP_MAN_DIR
-LIB_MAN_DIR
-FILE_MAN_DIR
-MISC_MAN_DIR
-DRIVER_MAN_DIR
-ADMIN_MAN_DIR
-LIBOBJS
-LTLIBOBJS'
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LN_S
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+enable_libtool_lock
+enable_silent_rules
+enable_xthreads
+with_lint
+enable_lint_library
+with_release_version
+'
       ac_precious_vars='build_alias
 host_alias
 target_alias
@@ -911,12 +951,6 @@ LDFLAGS
 LIBS
 CPPFLAGS
 CPP
-CXX
-CXXFLAGS
-CCC
-CXXCPP
-F77
-FFLAGS
 PKG_CONFIG
 XAU_CFLAGS
 XAU_LIBS'
@@ -925,6 +959,8 @@ XAU_LIBS'
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -1023,13 +1059,21 @@ do
     datarootdir=$ac_optarg ;;
 
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
 
   -docdir | --docdir | --docdi | --doc | --do)
     ac_prev=docdir ;;
@@ -1042,13 +1086,21 @@ do
     dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -1239,22 +1291,38 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -1274,7 +1342,7 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; }
     ;;
@@ -1283,16 +1351,16 @@ Try \`$0 --help' for more information." >&2
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
@@ -1301,22 +1369,38 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute directory names.
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
 		libdir localedir mandir
 do
   eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
   case $ac_val in
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
    { (exit 1); exit 1; }; }
 done
 
@@ -1331,7 +1415,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -1347,10 +1431,10 @@ test "$silent" = yes && exec 6>/dev/null
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
+  { $as_echo "$as_me: error: working directory cannot be determined" >&2
    { (exit 1); exit 1; }; }
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
    { (exit 1); exit 1; }; }
 
 
@@ -1358,12 +1442,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
   # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -1390,12 +1474,12 @@ else
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
    { (exit 1); exit 1; }; }
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
    { (exit 1); exit 1; }; }
 	pwd)`
 # When building in place, set srcdir=.
@@ -1422,7 +1506,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libXau 1.0.4 to adapt to many kinds of systems.
+\`configure' configures libXau 1.0.5 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1444,9 +1528,9 @@ Configuration:
 
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -1456,25 +1540,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/libXau]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/libXau]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1492,11 +1576,12 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libXau 1.0.4:";;
+     short | recursive ) echo "Configuration of libXau 1.0.5:";;
    esac
   cat <<\_ACEOF
 
 Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-maintainer-mode  enable make rules and dependencies not useful
@@ -1508,16 +1593,17 @@ Optional Features:
   --enable-fast-install[=PKGS]
                           optimize for fast installation [default=yes]
   --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-silent-rules          less verbose build output (undo: `make V=1')
+  --disable-silent-rules         verbose build output (undo: `make V=0')
   --disable-xthreads      Disable libXau support for Multithreading
   --enable-lint-library   Create lint library (default: disabled)
 
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
-  --with-tags[=TAGS]      include additional configurations [automatic]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-lint             Use a lint-style source code checker (default:
                           disabled)
   --with-release-version=STRING
@@ -1532,11 +1618,6 @@ Some influential environment variables:
   CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
               you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor
-  CXX         C++ compiler command
-  CXXFLAGS    C++ compiler flags
-  CXXCPP      C++ preprocessor
-  F77         Fortran 77 compiler command
-  FFLAGS      Fortran 77 compiler flags
   PKG_CONFIG  path to pkg-config utility
   XAU_CFLAGS  C compiler flags for XAU, overriding pkg-config
   XAU_LIBS    linker flags for XAU, overriding pkg-config
@@ -1552,15 +1633,17 @@ fi
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -1596,7 +1679,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
       echo &&
       $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi || ac_status=$?
     cd "$ac_pwd" || { ac_status=$?; break; }
   done
@@ -1605,11 +1688,11 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libXau configure 1.0.4
-generated by GNU Autoconf 2.61
+libXau configure 1.0.5
+generated by GNU Autoconf 2.63
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1619,8 +1702,8 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libXau $as_me 1.0.4, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+It was created by libXau $as_me 1.0.5, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   $ $0 $@
 
@@ -1656,7 +1739,7 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
+  $as_echo "PATH: $as_dir"
 done
 IFS=$as_save_IFS
 
@@ -1691,7 +1774,7 @@ do
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
     *\'*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
     1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -1743,11 +1826,12 @@ _ASBOX
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -1777,9 +1861,9 @@ _ASBOX
     do
       eval ac_val=\$$ac_var
       case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
       esac
-      echo "$ac_var='\''$ac_val'\''"
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
@@ -1794,9 +1878,9 @@ _ASBOX
       do
 	eval ac_val=\$$ac_var
 	case $ac_val in
-	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
 	esac
-	echo "$ac_var='\''$ac_val'\''"
+	$as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1812,8 +1896,8 @@ _ASBOX
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
   rm -f core *.core core.conftest.* &&
     rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
@@ -1855,21 +1939,24 @@ _ACEOF
 
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
+  ac_site_file1=$CONFIG_SITE
 elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
 else
-  set x "$ac_default_prefix/share/config.site" \
-	"$ac_default_prefix/etc/config.site"
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-shift
-for ac_site_file
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1879,16 +1966,16 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
       [\\/]* | ?:[\\/]* ) . "$cache_file";;
       *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
@@ -1902,29 +1989,38 @@ for ac_var in $ac_precious_vars; do
   eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1934,10 +2030,12 @@ echo "$as_me:   current value: $ac_new_val" >&2;}
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1972,7 +2070,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-am__api_version='1.10'
+am__api_version='1.11'
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -1991,8 +2089,8 @@ for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -2018,11 +2116,12 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -2051,17 +2150,29 @@ case $as_dir/ in
 	    # program-specific install script used by HP pwplus--don't use.
 	    :
 	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
     done
     ;;
 esac
+
 done
 IFS=$as_save_IFS
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
@@ -2074,8 +2185,8 @@ fi
     INSTALL=$ac_install_sh
   fi
 fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -2085,21 +2196,38 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$*" != "X $srcdir/configure conftest.file" \
@@ -2109,9 +2237,9 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&2;}
    { (exit 1); exit 1; }; }
    fi
@@ -2122,45 +2250,158 @@ then
    # Ok.
    :
 else
-   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
 Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
   program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
 fi
 
-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
   if test "${ac_cv_path_mkdir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
@@ -2195,8 +2436,8 @@ fi
     MKDIR_P="$ac_install_sh -d"
   fi
 fi
-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-echo "${ECHO_T}$MKDIR_P" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
 
 mkdir_p="$MKDIR_P"
 case $mkdir_p in
@@ -2208,10 +2449,10 @@ for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
   ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -2224,7 +2465,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2235,22 +2476,23 @@ fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
   test -n "$AWK" && break
 done
 
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
 if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
 SHELL = /bin/sh
@@ -2267,12 +2509,12 @@ esac
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -2291,8 +2533,8 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
    { (exit 1); exit 1; }; }
   fi
 fi
@@ -2309,7 +2551,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='libXau'
- VERSION='1.0.4'
+ VERSION='1.0.5'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2337,112 +2579,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 # Always define AMTAR for backward compatibility.
@@ -2455,8 +2591,9 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
 
 
-{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
     # Check whether --enable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
@@ -2464,8 +2601,8 @@ else
   USE_MAINTAINER_MODE=no
 fi
 
-  { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
    if test $USE_MAINTAINER_MODE = yes; then
   MAINTAINER_MODE_TRUE=
   MAINTAINER_MODE_FALSE='#'
@@ -2481,29 +2618,17 @@ fi
 ac_config_headers="$ac_config_headers config.h"
 
 
-# Require xorg-macros version 1.1.0 or newer for XORG_WITH_LINT macro
+# Require xorg-macros: XORG_CWARNFLAGS, XORG_CHANGELOG, XORG_WITH_LINT
+
+
+
+
+
+
+
+
 
 
-	XORG_MACROS_needed_version=1.1
-	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
-	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
-	{ echo "$as_me:$LINENO: checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}" >&5
-echo $ECHO_N "checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}... $ECHO_C" >&6; }
-	XORG_MACROS_version=1.1.6
-	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
-	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
-	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
-		{ { echo "$as_me:$LINENO: error: configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" >&5
-echo "$as_me: error: configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" >&2;}
-   { (exit 1); exit 1; }; }
-	fi
-	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
-		{ { echo "$as_me:$LINENO: error: configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" >&5
-echo "$as_me: error: configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" >&2;}
-   { (exit 1); exit 1; }; }
-	fi
-	{ echo "$as_me:$LINENO: result: yes, $XORG_MACROS_version" >&5
-echo "${ECHO_T}yes, $XORG_MACROS_version" >&6; }
 
 
 ac_ext=c
@@ -2514,10 +2639,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2530,7 +2655,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2541,11 +2666,11 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2554,10 +2679,10 @@ if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -2570,7 +2695,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2581,11 +2706,11 @@ fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
   if test "x$ac_ct_CC" = x; then
@@ -2593,12 +2718,8 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
     CC=$ac_ct_CC
@@ -2611,10 +2732,10 @@ if test -z "$CC"; then
           if test -n "$ac_tool_prefix"; then
     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2627,7 +2748,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2638,11 +2759,11 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2651,10 +2772,10 @@ fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2672,7 +2793,7 @@ do
        continue
      fi
     ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2695,11 +2816,11 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2710,10 +2831,10 @@ if test -z "$CC"; then
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2726,7 +2847,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2737,11 +2858,11 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2754,10 +2875,10 @@ if test -z "$CC"; then
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -2770,7 +2891,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2781,11 +2902,11 @@ fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2797,12 +2918,8 @@ done
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
     CC=$ac_ct_CC
@@ -2812,44 +2929,50 @@ fi
 fi
 
 
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
 See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
+$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
+$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
 { (ac_try="$ac_compiler --version >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 { (ac_try="$ac_compiler -v >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 { (ac_try="$ac_compiler -V >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 
 cat >conftest.$ac_ext <<_ACEOF
@@ -2868,27 +2991,22 @@ main ()
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort.  b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions.  Remove them first so a
-# subsequent execution test works.
+{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
 ac_rmfiles=
 for ac_file in $ac_files
 do
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
     * ) ac_rmfiles="$ac_rmfiles $ac_file";;
   esac
 done
@@ -2899,10 +3017,11 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link_default") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
 # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
@@ -2913,7 +3032,7 @@ for ac_file in $ac_files ''
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
@@ -2940,25 +3059,27 @@ else
   ac_file=''
 fi
 
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
 if test -z "$ac_file"; then
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
 See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
+$as_echo "$as_me: error: C compiler cannot create executables
 See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }
+   { (exit 77); exit 77; }; }; }
 fi
 
 ac_exeext=$ac_cv_exeext
 
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
@@ -2967,49 +3088,53 @@ if test "$cross_compiling" != yes; then
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
     cross_compiling=no
   else
     if test "$cross_compiling" = maybe; then
 	cross_compiling=yes
     else
-	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
+$as_echo "$as_me: error: cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
     fi
   fi
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
 
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
 if { (ac_try="$ac_link"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   # If both `conftest.exe' and `conftest' are `present' (well, observable)
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
@@ -3018,31 +3143,33 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
 	  break;;
     * ) break;;
   esac
 done
 else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 fi
 
 rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
 if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -3065,40 +3192,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   for ac_file in conftest.o conftest.obj conftest.*; do
   test -f "$ac_file" || continue;
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
 done
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
+$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 fi
 
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -3124,20 +3254,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
   ac_compiler_gnu=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_compiler_gnu=no
@@ -3147,15 +3278,19 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
    ac_c_werror_flag=yes
@@ -3182,20 +3317,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	CFLAGS=""
@@ -3220,20 +3356,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
   :
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_c_werror_flag=$ac_save_c_werror_flag
@@ -3259,20 +3396,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 
@@ -3287,8 +3425,8 @@ fi
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -3304,10 +3442,10 @@ else
     CFLAGS=
   fi
 fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
 if test "${ac_cv_prog_cc_c89+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
@@ -3378,20 +3516,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_c89=$ac_arg
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 
@@ -3407,15 +3546,15 @@ fi
 # AC_CACHE_VAL
 case "x$ac_cv_prog_cc_c89" in
   x)
-    { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
+    { $as_echo "$as_me:$LINENO: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
   xno)
-    { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
+    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
   *)
     CC="$CC $ac_cv_prog_cc_c89"
-    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
 esac
 
 
@@ -3432,40 +3571,40 @@ ac_config_commands="$ac_config_commands depfiles"
 am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
 am__include="#"
 am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 
 
-{ echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
 rm -f confinc confmf
 
 # Check whether --enable-dependency-tracking was given.
@@ -3489,10 +3628,10 @@ fi
 
 depcc="$CC"   am_compiler_list=
 
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
   # We make a subdir and do the tests there.  Otherwise we can end up
@@ -3517,6 +3656,11 @@ else
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -3534,7 +3678,17 @@ else
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -3544,19 +3698,23 @@ else
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -3580,8 +3738,8 @@ else
 fi
 
 fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
  if
@@ -3608,11 +3766,12 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -3641,17 +3800,29 @@ case $as_dir/ in
 	    # program-specific install script used by HP pwplus--don't use.
 	    :
 	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
     done
     ;;
 esac
+
 done
 IFS=$as_save_IFS
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
@@ -3664,8 +3835,8 @@ fi
     INSTALL=$ac_install_sh
   fi
 fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -3675,121 +3846,47 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
 LN_S=$as_ln_s
 if test "$LN_S" = "ln -s"; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6; }
-fi
-
-
-
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval=$enable_shared; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 else
-  enable_shared=yes
+  { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
 fi
 
-
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval=$enable_static; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_static=yes
-fi
-
-
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval=$enable_fast_install; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_fast_install=yes
-fi
-
-
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
    { (exit 1); exit 1; }; }
 
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
 if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
    { (exit 1); exit 1; }; }
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
    { (exit 1); exit 1; }; }
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+$as_echo "$as_me: error: invalid value of canonical build" >&2;}
    { (exit 1); exit 1; }; };;
 esac
 build=$ac_cv_build
@@ -3806,27 +3903,27 @@ IFS=$ac_save_IFS
 case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
 if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+$as_echo "$as_me: error: invalid value of canonical host" >&2;}
    { (exit 1); exit 1; }; };;
 esac
 host=$ac_cv_host
@@ -3843,99 +3940,449 @@ IFS=$ac_save_IFS
 case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
-{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
 else
-  # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
 done
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:$LINENO: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+  ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.6'
+macro_revision='1.3012'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${ac_cv_path_SED+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     $as_unset ac_script || ac_script=
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
     fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
   done
 done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5
+$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
 
 fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
 
-SED=$lt_cv_path_SED
-{ echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6; }
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
 
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
 if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
+  if test -z "$GREP"; then
   ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_prog in grep ggrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-    # Check for GNU ac_path_GREP and select it if it is found.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
 *GNU*)
   ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
 *)
   ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  $as_echo_n 0123456789 >"conftest.in"
   while :
   do
     cat "conftest.in" "conftest.in" >"conftest.tmp"
     mv "conftest.tmp" "conftest.in"
     cp "conftest.in" "conftest.nl"
-    echo 'GREP' >> "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
     "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
@@ -3950,74 +4397,60 @@ case `"$ac_path_GREP" --version 2>&1` in
   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
-
-    $ac_path_GREP_found && break 3
+      $ac_path_GREP_found && break 3
+    done
   done
 done
-
-done
 IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+  if test -z "$ac_cv_path_GREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
    { (exit 1); exit 1; }; }
-fi
-
+  fi
 else
   ac_cv_path_GREP=$GREP
 fi
 
-
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
  GREP="$ac_cv_path_GREP"
 
 
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
 if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
    then ac_cv_path_EGREP="$GREP -E"
    else
-     # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
+     if test -z "$EGREP"; then
   ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_prog in egrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-    # Check for GNU ac_path_EGREP and select it if it is found.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
 *GNU*)
   ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
 *)
   ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  $as_echo_n 0123456789 >"conftest.in"
   while :
   do
     cat "conftest.in" "conftest.in" >"conftest.tmp"
     mv "conftest.tmp" "conftest.in"
     cp "conftest.in" "conftest.nl"
-    echo 'EGREP' >> "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
     "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
@@ -4032,34 +4465,113 @@ case `"$ac_path_EGREP" --version 2>&1` in
   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
-
-    $ac_path_EGREP_found && break 3
+      $ac_path_EGREP_found && break 3
+    done
   done
 done
-
-done
 IFS=$as_save_IFS
-
-
+  if test -z "$ac_cv_path_EGREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
 fi
 
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
+   fi
 fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
 
+{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_path_EGREP=$EGREP
-fi
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
 
+      $ac_path_FGREP_found && break 3
+    done
+  done
+done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
 
    fi
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 
 
 
@@ -4073,8 +4585,8 @@ fi
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -4087,9 +4599,9 @@ echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
     [\\/]* | ?:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -4103,14 +4615,14 @@ echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
 else
-  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
 fi
 if test "${lt_cv_path_LD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
@@ -4140,19 +4652,19 @@ fi
 
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $LD" >&5
+$as_echo "$LD" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   # I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
@@ -4164,40 +4676,22 @@ case `$LD -v 2>&1 </dev/null` in
   ;;
 esac
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
-{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
 
-{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
 if test "${lt_cv_path_NM+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
   # Let the user override the test.
@@ -4240,17 +4734,479 @@ else
     done
     IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:4865: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:4868: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:4871: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
 fi
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
 
-{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; }
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
 if test "${lt_cv_deplibs_check_method+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -4267,7 +5223,7 @@ lt_cv_deplibs_check_method='unknown'
 # whether `pass_all' will *always* work, you probably want this one.
 
 case $host_os in
-aix4* | aix5*)
+aix[4-9]*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -4289,8 +5245,20 @@ cygwin*)
 
 mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
   ;;
 
@@ -4298,8 +5266,8 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | kfreebsd*-gnu | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
@@ -4336,7 +5304,7 @@ hpux10.20* | hpux11*)
   esac
   ;;
 
-interix3*)
+interix[3-9]*)
   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
   lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
   ;;
@@ -4352,12 +5320,12 @@ irix5* | irix6* | nonstopux*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
@@ -4370,12 +5338,12 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -4386,10 +5354,18 @@ osf3* | osf4* | osf5*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
@@ -4417,14 +5393,14 @@ sysv4 | sysv4.3*)
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -4432,6 +5408,367 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
 
 
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:$LINENO: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="ar"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -4442,6 +5779,256 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 compiler=$CC
 
 
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+const struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:$LINENO: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
   enableval=$enable_libtool_lock;
@@ -4458,97 +6045,104 @@ ia64-*-hpux*)
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
     case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 4476 "configure"' > conftest.$ac_ext
+  echo '#line 6063 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
   fi
   rm -rf conftest*
   ;;
 
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
     case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
     esac
   fi
   rm -rf conftest*
@@ -4558,10 +6152,10 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
-  { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
 if test "${lt_cv_cc_needs_belf+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -4590,26 +6184,30 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   lt_cv_cc_needs_belf=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	lt_cv_cc_needs_belf=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
      ac_ext=c
@@ -4619,8 +6217,8 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
@@ -4632,31 +6230,40 @@ sparc*-*solaris*)
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
     case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
       esac
       ;;
     esac
   fi
   rm -rf conftest*
   ;;
+esac
 
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_DLLTOOL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+need_locks="$enable_libtool_lock"
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -4665,8 +6272,8 @@ do
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -4675,28 +6282,28 @@ IFS=$as_save_IFS
 
 fi
 fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
-  { echo "$as_me:$LINENO: result: $DLLTOOL" >&5
-echo "${ECHO_T}$DLLTOOL" >&6; }
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
 fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
-  ac_ct_DLLTOOL=$DLLTOOL
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_DLLTOOL"; then
-  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -4705,8 +6312,8 @@ do
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -4715,44 +6322,40 @@ IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
-echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; }
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_DLLTOOL" = x; then
-    DLLTOOL="false"
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    DLLTOOL=$ac_ct_DLLTOOL
+    DSYMUTIL=$ac_ct_DSYMUTIL
   fi
 else
-  DLLTOOL="$ac_cv_prog_DLLTOOL"
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
 fi
 
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AS+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -4761,8 +6364,8 @@ do
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AS="${ac_tool_prefix}as"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -4771,28 +6374,28 @@ IFS=$as_save_IFS
 
 fi
 fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
-  { echo "$as_me:$LINENO: result: $AS" >&5
-echo "${ECHO_T}$AS" >&6; }
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
 fi
-if test -z "$ac_cv_prog_AS"; then
-  ac_ct_AS=$AS
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_AS"; then
-  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -4801,8 +6404,8 @@ do
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AS="as"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -4811,44 +6414,40 @@ IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-echo "${ECHO_T}$ac_ct_AS" >&6; }
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_AS" = x; then
-    AS="false"
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    AS=$ac_ct_AS
+    NMEDIT=$ac_ct_NMEDIT
   fi
 else
-  AS="$ac_cv_prog_AS"
+  NMEDIT="$ac_cv_prog_NMEDIT"
 fi
 
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -4857,8 +6456,8 @@ do
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -4867,28 +6466,28 @@ IFS=$as_save_IFS
 
 fi
 fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
-  { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
-echo "${ECHO_T}$OBJDUMP" >&6; }
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:$LINENO: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
 fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
-  ac_ct_OBJDUMP=$OBJDUMP
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_OBJDUMP"; then
-  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -4897,8 +6496,8 @@ do
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -4907,55 +6506,379 @@ IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_OBJDUMP" = x; then
-    OBJDUMP="false"
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    OBJDUMP=$ac_ct_OBJDUMP
+    LIPO=$ac_ct_LIPO
   fi
 else
-  OBJDUMP="$ac_cv_prog_OBJDUMP"
+  LIPO="$ac_cv_prog_LIPO"
 fi
 
-  ;;
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
 
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
 esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL64+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
 
-need_locks="$enable_libtool_lock"
 
 
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  lt_cv_ld_exported_symbols_list=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	lt_cv_ld_exported_symbols_list=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
   if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
     for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
@@ -4987,20 +6910,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } >/dev/null && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        }; then
   :
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
   # Broken: fails on valid input.
@@ -5024,13 +6948,14 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } >/dev/null && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
@@ -5038,7 +6963,7 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
   # Broken: success on invalid input.
 continue
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
   # Passes both tests.
@@ -5063,8 +6988,8 @@ fi
 else
   ac_cv_prog_CPP=$CPP
 fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
 do
@@ -5092,20 +7017,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } >/dev/null && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        }; then
   :
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
   # Broken: fails on valid input.
@@ -5129,13 +7055,14 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } >/dev/null && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
@@ -5143,7 +7070,7 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
   # Broken: success on invalid input.
 continue
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
   # Passes both tests.
@@ -5159,11 +7086,13 @@ rm -f conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then
   :
 else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
 See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 fi
 
 ac_ext=c
@@ -5173,10 +7102,10 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
 if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -5203,20 +7132,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
   ac_cv_header_stdc=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_header_stdc=no
@@ -5308,37 +7238,40 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
   { (case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
   :
 else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
+rm -rf conftest.dSYM
 rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
 
 fi
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -5360,11 +7293,11 @@ fi
 for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
 		  inttypes.h stdint.h unistd.h
 do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
 if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -5382,20 +7315,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
   eval "$as_ac_Header=yes"
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	eval "$as_ac_Header=no"
@@ -5403,12 +7337,15 @@ fi
 
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+   if test "x$as_val" = x""yes; then
   cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
 
 fi
@@ -5419,27 +7356,20 @@ done
 
 for ac_header in dlfcn.h
 do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
 if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+  $as_echo_n "(cached) " >&6
 else
-  # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
+  cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
@@ -5448,1440 +7378,252 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
+  eval "$as_ac_Header=yes"
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_header_compiler=no
+	eval "$as_ac_Header=no"
 fi
 
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
 fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+   if test "x$as_val" = x""yes; then
   cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
 
 fi
 
 done
 
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
-  if test -n "$CCC"; then
-    CXX=$CCC
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
-  { echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-    test -n "$CXX" && break
-  done
-fi
-if test -z "$CXX"; then
-  ac_ct_CXX=$CXX
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CXX"; then
-  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CXX="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
 
+# Set options
 
-  test -n "$ac_ct_CXX" && break
-done
 
-  if test "x$ac_ct_CXX" = x; then
-    CXX="g++"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    CXX=$ac_ct_CXX
-  fi
-fi
 
-  fi
-fi
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+        enable_dlopen=no
 
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_compiler_gnu=yes
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
+  enable_shared=yes
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-GXX=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-   ac_cxx_werror_flag=yes
-   ac_cv_prog_cxx_g=no
-   CXXFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_cxx_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	CXXFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-	 CXXFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_cxx_g=yes
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+  enable_static=yes
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-depcc="$CXX"  am_compiler_list=
 
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
 
-  am_cv_CXX_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CXX_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
 
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CXX_dependencies_compiler_type=none
-fi
 
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
-  am__fastdepCXX_TRUE=
-  am__fastdepCXX_FALSE='#'
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then
+  withval=$with_pic; pic_mode="$withval"
 else
-  am__fastdepCXX_TRUE='#'
-  am__fastdepCXX_FALSE=
+  pic_mode=default
 fi
 
 
+test -z "$pic_mode" && pic_mode=default
 
 
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-if test -z "$CXXCPP"; then
-  if test "${ac_cv_prog_CXXCPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CXXCPP needs to be expanded
-    for CXXCPP in "$CXX -E" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
 
-    done
-    ac_cv_prog_CXXCPP=$CXXCPP
 
-fi
-  CXXCPP=$ac_cv_prog_CXXCPP
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  ac_cv_prog_CXXCPP=$CXXCPP
+  enable_fast_install=yes
 fi
-{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-echo "${ECHO_T}$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-  # Broken: fails on valid input.
-continue
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
 
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-fi
 
 
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$F77"; then
-  ac_cv_prog_F77="$F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
-  { echo "$as_me:$LINENO: result: $F77" >&5
-echo "${ECHO_T}$F77" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
 
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
-    test -n "$F77" && break
-  done
-fi
-if test -z "$F77"; then
-  ac_ct_F77=$F77
-  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_F77"; then
-  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_F77="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-echo "${ECHO_T}$ac_ct_F77" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
 
 
-  test -n "$ac_ct_F77" && break
-done
 
-  if test "x$ac_ct_F77" = x; then
-    F77=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    F77=$ac_ct_F77
-  fi
-fi
 
 
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-rm -f a.out
 
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file.  (Note that this only needs to work for GNU compilers.)
-ac_save_ext=$ac_ext
-ac_ext=F
-{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-      program main
-#ifndef __GNUC__
-       choke me
-#endif
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_compiler_gnu=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
 
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
-ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  FFLAGS=-g
-cat >conftest.$ac_ext <<_ACEOF
-      program main
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_f77_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_prog_f77_g=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
-if test "$ac_test_FFLAGS" = set; then
-  FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-g -O2"
-  else
-    FFLAGS="-g"
-  fi
-else
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-O2"
-  else
-    FFLAGS=
-  fi
-fi
 
-G77=`test $ac_compiler_gnu = yes && echo yes`
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
 
-# find the maximum length of command line arguments
-{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-    i=0
-  teststring="ABCD"
 
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
 
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
 
-  cygwin* | mingw*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
 
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
+test -z "$LN_S" && LN_S="ln -s"
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
 
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
 
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      teststring=$teststring$teststring
-    done
-    teststring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    ;;
-  esac
 
-fi
 
-if test -n $lt_cv_sys_max_cmd_len ; then
-  { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-else
-  { echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6; }
-fi
 
 
 
 
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
 
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
 
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDGIRSTW]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
-  ;;
-osf*)
-  symcode='[BCDEGQRST]'
-  ;;
-solaris*)
-  symcode='[BDRT]'
-  ;;
-sco3.2v5*)
-  symcode='[DT]'
-  ;;
-sysv4.2uw2*)
-  symcode='[DT]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[ABDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
+{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if test "${lt_cv_objdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
 
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[ABCDGIRSTW]' ;;
-esac
 
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
 
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
 
-  # Check to see that the pipe works correctly.
-  pipe_works=no
 
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
 
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
 
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
 
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
 
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
 
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
 
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
 
-fi
 
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6; }
-else
-  { echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6; }
-fi
 
-{ echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-if test "${lt_cv_objdir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
 
 
 
@@ -6901,360 +7643,41 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
-
 # Global variables:
-default_ofile=libtool
+ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AR="ar"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
 
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
 for cc_temp in $compiler""; do
   case $cc_temp in
     compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
@@ -7263,17 +7686,18 @@ for cc_temp in $compiler""; do
     *) break;;
   esac
 done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
 # Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
@@ -7297,7 +7721,7 @@ else
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -7308,7 +7732,7 @@ else
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -7323,19 +7747,23 @@ fi
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
+
+
+
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    { echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
@@ -7359,7 +7787,7 @@ else
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -7370,7 +7798,7 @@ else
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -7385,13 +7813,14 @@ fi
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
   else
     MAGIC_CMD=:
   fi
@@ -7401,28 +7830,8 @@ fi
   ;;
 esac
 
-enable_dlopen=no
-enable_win32_dll=yes
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
-  withval=$with_pic; pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test -z "$pic_mode" && pic_mode=default
-
 # Use C for the default configuration in the libtool script
-tagname=
+
 lt_save_CC="$CC"
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -7439,10 +7848,15 @@ objext=o
 objext=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+lt_simple_compile_test_code="int some_variable = 0;"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
 
 
 # If no C compiler was specified, use CC.
@@ -7454,36 +7868,39 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
 
 # save warnings/boilerplate of simple test code
 ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 
 ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM -r conftest*
 
 
+if test -n "$compiler"; then
 
 lt_prog_compiler_no_builtin_flag=
 
 if test "$GCC" = yes; then
   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="-fno-rtti -fno-exceptions"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -7494,25 +7911,25 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7497: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7914: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7501: \$? = $ac_status" >&5
+   echo "$as_me:7918: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
 if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
@@ -7522,12 +7939,17 @@ fi
 
 fi
 
-lt_prog_compiler_wl=
+
+
+
+
+
+  lt_prog_compiler_wl=
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl='-Wl,'
@@ -7543,19 +7965,29 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
       ;;
 
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
 
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
       lt_prog_compiler_pic='-DDLL_EXPORT'
       ;;
 
@@ -7565,7 +7997,21 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
       lt_prog_compiler_pic='-fno-common'
       ;;
 
-    interix3*)
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -7577,25 +8023,18 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
       enable_shared=no
       ;;
 
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
     sysv4*MP*)
       if test -d /usr/nec; then
 	lt_prog_compiler_pic=-Kconform_pic
       fi
       ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='-fPIC'
-	;;
-      esac
-      ;;
-
     *)
       lt_prog_compiler_pic='-fPIC'
       ;;
@@ -7612,18 +8051,8 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic='-qnocommon'
-         lt_prog_compiler_wl='-Wl,'
-         ;;
-       esac
-       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic='-DDLL_EXPORT'
@@ -7651,18 +8080,27 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    linux*)
+    linux* | k*bsd*-gnu)
       case $cc_basename in
-      icc* | ecc*)
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
 	lt_prog_compiler_static='-static'
         ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -7675,15 +8113,52 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
         # All Alpha code is PIC.
         lt_prog_compiler_static='-non_shared'
         ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	esac
+	;;
       esac
       ;;
 
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
     osf3* | osf4* | osf5*)
       lt_prog_compiler_wl='-Wl,'
       # All OSF/1 code is PIC.
       lt_prog_compiler_static='-non_shared'
       ;;
 
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
     solaris*)
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
@@ -7736,22 +8211,35 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
     esac
   fi
 
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
+
+
+
+
+
 
 #
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+  { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -7762,27 +8250,27 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7765: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8253: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7769: \$? = $ac_status" >&5
+   echo "$as_me:8257: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works=yes
+       lt_cv_prog_compiler_pic_works=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
-if test x"$lt_prog_compiler_pic_works" = xyes; then
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
     case $lt_prog_compiler_pic in
      "" | " "*) ;;
      *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -7793,69 +8281,125 @@ else
 fi
 
 fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
+
+
+
+
+
 
 #
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  lt_prog_compiler_static_works=no
+  lt_cv_prog_compiler_static_works=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
      # The linker can only warn and ignore the option if not recognized
      # So say no if there are warnings
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works=yes
+         lt_cv_prog_compiler_static_works=yes
        fi
      else
-       lt_prog_compiler_static_works=yes
+       lt_cv_prog_compiler_static_works=yes
      fi
    fi
-   $rm conftest*
+   $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
-if test x"$lt_prog_compiler_static_works" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
     :
 else
     lt_prog_compiler_static=
 fi
 
 
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:8358: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:8362: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
-   $rm -r conftest 2>/dev/null
+   $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -7866,83 +8410,93 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7869: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8413: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7873: \$? = $ac_status" >&5
+   echo "$as_me:8417: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
      fi
    fi
    chmod u+w . 2>&5
-   $rm conftest*
+   $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
    cd ..
-   rmdir conftest
-   $rm conftest*
+   $RM -r conftest
+   $RM conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
 
 
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
   hard_links=yes
-  $rm conftest*
+  $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
   if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
   need_locks=no
 fi
 
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
   runpath_var=
   allow_undefined_flag=
-  enable_shared_with_static_runtimes=no
+  always_export_symbols=no
   archive_cmds=
   archive_expsym_cmds=
-  old_archive_From_new_cmds=
-  old_archive_from_expsyms_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
   export_dynamic_flag_spec=
-  whole_archive_flag_spec=
-  thread_safe_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
   hardcode_libdir_flag_spec=
   hardcode_libdir_flag_spec_ld=
   hardcode_libdir_separator=
-  hardcode_direct=no
   hardcode_minus_L=no
   hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
   link_all_deplibs=unknown
-  hardcode_automatic=no
   module_cmds=
   module_expsym_cmds=
-  always_export_symbols=no
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
   # include_expsyms should be a list of space-separated symbols to be *always*
   # included in the symbol list
   include_expsyms=
@@ -7950,26 +8504,17 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
   extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
-  cygwin* | mingw* | pw32*)
+  cygwin* | mingw* | pw32* | cegcc*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
@@ -7995,16 +8540,16 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
     export_dynamic_flag_spec='${wl}--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec=
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
+    case `$LD -v 2>&1` in
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -8014,11 +8559,11 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	ld_shlibs=no
-	cat <<EOF 1>&2
+	cat <<_LT_EOF 1>&2
 
 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
@@ -8026,26 +8571,27 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 *** really care for shared libraries, you may want to modify your PATH
 *** so that a non-GNU linker is found, and then restart.
 
-EOF
+_LT_EOF
       fi
       ;;
 
     amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
       ;;
 
     beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	allow_undefined_flag=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
@@ -8055,16 +8601,16 @@ EOF
       fi
       ;;
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
@@ -8080,7 +8626,7 @@ EOF
       fi
       ;;
 
-    interix3*)
+    interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
       hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
@@ -8095,39 +8641,78 @@ EOF
       archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
 	tmp_addflag=
+	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
 	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
 	  tmp_addflag=' -i_dynamic -nofor_main' ;;
 	ifc* | ifort*)			# Intel Fortran compiler
 	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
 	esac
-	archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec=
+	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
       else
-	ld_shlibs=no
+        ld_shlibs=no
       fi
       ;;
 
     netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
@@ -8137,9 +8722,9 @@ EOF
       ;;
 
     solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
 	ld_shlibs=no
-	cat <<EOF 1>&2
+	cat <<_LT_EOF 1>&2
 
 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
 *** create shared libraries on Solaris systems.  Therefore, libtool
@@ -8148,8 +8733,8 @@ EOF
 *** your PATH or compiler configuration so that the native linker is
 *** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
@@ -8173,10 +8758,14 @@ EOF
 _LT_EOF
 	;;
 	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    ld_shlibs=no
 	  fi
@@ -8192,7 +8781,7 @@ _LT_EOF
       ;;
 
     *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
@@ -8224,7 +8813,7 @@ _LT_EOF
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[4-9]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -8234,22 +8823,22 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
 	  done
 	  ;;
 	esac
@@ -8266,28 +8855,30 @@ _LT_EOF
 
       archive_cmds=''
       hardcode_direct=yes
+      hardcode_direct_absolute=yes
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
 
       if test "$GCC" = yes; then
 	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
-  	  # We have reworked collect2
-  	  hardcode_direct=yes
+	  # We have reworked collect2
+	  :
 	  else
-  	  # We have old collect2
-  	  hardcode_direct=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L=yes
-  	  hardcode_libdir_flag_spec='-L$libdir'
-  	  hardcode_libdir_separator=
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
 	  fi
 	  ;;
 	esac
@@ -8298,8 +8889,8 @@ _LT_EOF
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
 	  if test "$aix_use_runtimelinking" = yes; then
@@ -8310,6 +8901,7 @@ _LT_EOF
 	fi
       fi
 
+      export_dynamic_flag_spec='${wl}-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       always_export_symbols=yes
@@ -8317,8 +8909,9 @@ _LT_EOF
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	allow_undefined_flag='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -8339,44 +8932,56 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
 	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
-	 # Determine the default libpath from the value encoded in an empty executable.
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -8398,31 +9003,42 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
@@ -8442,18 +9058,25 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
       ;;
 
     bsdi[45]*)
       export_dynamic_flag_spec=-rdynamic
       ;;
 
-    cygwin* | mingw* | pw32*)
+    cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
@@ -8465,63 +9088,40 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds='true'
+      old_archive_from_new_cmds='true'
       # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
       fix_srcfile_path='`cygpath -w "$srcfile"`'
       enable_shared_with_static_runtimes=yes
       ;;
 
     darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc=no
-      hardcode_direct=no
-      hardcode_automatic=yes
-      hardcode_shlibpath_var=unsupported
-      whole_archive_flag_spec=''
-      link_all_deplibs=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs=no
-          ;;
-      esac
-    fi
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  whole_archive_flag_spec=''
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
       ;;
 
     dgux*)
@@ -8554,7 +9154,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
+    freebsd* | dragonfly*)
       archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
@@ -8563,9 +9163,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
     hpux9*)
       if test "$GCC" = yes; then
-	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
-	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
       hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
       hardcode_libdir_separator=:
@@ -8585,11 +9185,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       if test "$with_gnu_ld" = no; then
 	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_flag_spec_ld='+b $libdir'
 	hardcode_libdir_separator=:
-
 	hardcode_direct=yes
+	hardcode_direct_absolute=yes
 	export_dynamic_flag_spec='${wl}-E'
-
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	hardcode_minus_L=yes
@@ -8603,7 +9203,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
@@ -8628,12 +9228,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
 	case $host_cpu in
 	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld='+b $libdir'
 	  hardcode_direct=no
 	  hardcode_shlibpath_var=no
 	  ;;
 	*)
 	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
 	  export_dynamic_flag_spec='${wl}-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
@@ -8646,18 +9246,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        cat >conftest.$ac_ext <<_ACEOF
+int foo(void) {}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+        LDFLAGS="$save_LDFLAGS"
       else
-	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld='-rpath $libdir'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       hardcode_libdir_separator=:
+      inherit_rpath=yes
       link_all_deplibs=yes
       ;;
 
     netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
 	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
@@ -8675,25 +9319,33 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       ;;
 
+    *nto* | *qnx*)
+      ;;
+
     openbsd*)
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
       else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	ld_shlibs=no
       fi
       ;;
 
@@ -8701,18 +9353,19 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       hardcode_libdir_separator=:
       ;;
@@ -8720,49 +9373,59 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_separator=:
       ;;
 
     solaris*)
-      no_undefined_flag=' -z text'
+      no_undefined_flag=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
-	wlarc=''
-	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
       fi
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_shlibpath_var=no
       case $host_os in
       solaris2.[0-5] | solaris2.[0-5].*) ;;
       *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
       esac
       link_all_deplibs=yes
       ;;
@@ -8819,7 +9482,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       ;;
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
       no_undefined_flag='${wl}-z,text'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
@@ -8845,18 +9508,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       allow_undefined_flag='${wl}-z,nodefs'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
       export_dynamic_flag_spec='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -8870,12 +9533,36 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs=no
       ;;
     esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
   fi
 
-{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
 test "$ld_shlibs" = no && can_build_shared=no
 
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 #
 # Do we need to explicitly link libc?
 #
@@ -8893,15 +9580,15 @@ x|xyes)
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } 2>conftest.err; then
         soname=conftest
         lib=conftest
@@ -8916,10 +9603,10 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libname=conftest
         lt_save_allow_undefined_flag=$allow_undefined_flag
         allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
         then
 	  archive_cmds_need_lc=no
@@ -8930,17 +9617,225 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
       else
         cat conftest.err 1>&5
       fi
-      $rm conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
+      $RM conftest*
+      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
       ;;
     esac
   fi
   ;;
 esac
 
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -8954,20 +9849,6 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -8985,7 +9866,7 @@ aix3*)
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[4-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -9004,7 +9885,7 @@ aix4* | aix5*)
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
@@ -9030,9 +9911,18 @@ aix4* | aix5*)
   ;;
 
 amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
   ;;
 
 beos*)
@@ -9055,25 +9945,28 @@ bsdi[45]*)
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
-       $rm \$dlpath'
+       $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
@@ -9082,20 +9975,20 @@ cygwin* | mingw* | pw32*)
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH printed by
         # mingw gcc, but we are running on Cygwin. Gcc prints its search
         # path with ; separators, and with drive letters. We can handle the
         # drive letters (cygwin fileutils understands them), so leave them,
         # especially as we might pass files found there to a mingw objdump,
         # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
       ;;
     pw32*)
@@ -9119,17 +10012,13 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -9146,18 +10035,6 @@ freebsd1*)
   dynamic_linker=no
   ;;
 
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -9195,7 +10072,7 @@ freebsd* | dragonfly*)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
-  freebsd*) # from 4.6 on
+  *) # from 4.6 on, and DragonFly
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
@@ -9234,18 +10111,18 @@ hpux9* | hpux10* | hpux11*)
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
@@ -9258,7 +10135,7 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[3-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -9313,7 +10190,7 @@ linux*oldld* | linux*aout* | linux*coff*)
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -9322,15 +10199,76 @@ linux*)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
+  shlibpath_overrides_runpath=yes
+fi
+
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
+
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -9342,23 +10280,11 @@ linux*)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-knetbsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
@@ -9379,14 +10305,16 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx*)
-  version_type=linux
+*nto* | *qnx*)
+  version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
@@ -9395,13 +10323,13 @@ openbsd*)
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[89] | openbsd2.[89].*)
 	shlibpath_overrides_runpath=no
@@ -9435,6 +10363,10 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
+rdos*)
+  dynamic_linker=no
+  ;;
+
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -9469,7 +10401,6 @@ sysv4 | sysv4.3*)
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
@@ -9500,13 +10431,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -9516,6 +10446,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -9527,8 +10468,8 @@ uts4*)
   dynamic_linker=no
   ;;
 esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
@@ -9536,19 +10477,112 @@ if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var" || \
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
    test "X$hardcode_automatic" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
+  # We can hardcode non-existent directories.
   if test "$hardcode_direct" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
      test "$hardcode_minus_L" != no; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action=relink
@@ -9561,10 +10595,11 @@ else
   # directories.
   hardcode_action=unsupported
 fi
-{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink; then
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -9573,36 +10608,12 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   enable_fast_install=needless
 fi
 
-striplib=
-old_striplib=
-{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-       else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-       ;;
-   *)
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-    ;;
-  esac
-fi
 
-if test "x$enable_dlopen" != xyes; then
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -9617,22 +10628,22 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   darwin*)
   # if libdl is installed we need to link against it
-    { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
@@ -9664,33 +10675,37 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_dl_dlopen=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_dl_dlopen=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
 
@@ -9700,13 +10715,13 @@ else
 
 fi
 
-   ;;
+    ;;
 
   *)
-    { echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
+$as_echo_n "checking for shl_load... " >&6; }
 if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -9759,38 +10774,42 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_func_shl_load=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_func_shl_load=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-if test $ac_cv_func_shl_load = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+$as_echo "$ac_cv_func_shl_load" >&6; }
+if test "x$ac_cv_func_shl_load" = x""yes; then
   lt_cv_dlopen="shl_load"
 else
-  { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
 if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
@@ -9822,39 +10841,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_dld_shl_load=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_dld_shl_load=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
-  { echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
+$as_echo_n "checking for dlopen... " >&6; }
 if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -9907,38 +10930,42 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_func_dlopen=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_func_dlopen=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-if test $ac_cv_func_dlopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+$as_echo "$ac_cv_func_dlopen" >&6; }
+if test "x$ac_cv_func_dlopen" = x""yes; then
   lt_cv_dlopen="dlopen"
 else
-  { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
@@ -9970,39 +10997,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_dl_dlopen=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_dl_dlopen=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
-  { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
 if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lsvld  $LIBS"
@@ -10034,39 +11065,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_svld_dlopen=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_svld_dlopen=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-if test $ac_cv_lib_svld_dlopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
-  { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
 if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
@@ -10098,34 +11133,38 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_dld_dld_link=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_dld_dld_link=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
 
 
@@ -10163,18 +11202,18 @@ fi
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
 if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
   lt_cv_dlopen_self=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 10177 "configure"
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 11216 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10215,10 +11254,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -10234,13 +11269,13 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }
-EOF
+_LT_EOF
   if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   (eval $ac_link) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
@@ -10258,23 +11293,23 @@ rm -fr conftest*
 
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
 
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
+      { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
 if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
   lt_cv_dlopen_self_static=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 10277 "configure"
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 11312 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10315,10 +11350,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -10334,13 +11365,13 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }
-EOF
+_LT_EOF
   if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   (eval $ac_link) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
@@ -10358,8 +11389,8 @@ rm -fr conftest*
 
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
     fi
 
     CPPFLAGS="$save_CPPFLAGS"
@@ -10380,9275 +11411,250 @@ echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
 fi
 
 
-# Report which library types will actually be built
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler \
-    CC \
-    LD \
-    lt_prog_compiler_wl \
-    lt_prog_compiler_pic \
-    lt_prog_compiler_static \
-    lt_prog_compiler_no_builtin_flag \
-    export_dynamic_flag_spec \
-    thread_safe_flag_spec \
-    whole_archive_flag_spec \
-    enable_shared_with_static_runtimes \
-    old_archive_cmds \
-    old_archive_from_new_cmds \
-    predep_objects \
-    postdep_objects \
-    predeps \
-    postdeps \
-    compiler_lib_search_path \
-    archive_cmds \
-    archive_expsym_cmds \
-    postinstall_cmds \
-    postuninstall_cmds \
-    old_archive_from_expsyms_cmds \
-    allow_undefined_flag \
-    no_undefined_flag \
-    export_symbols_cmds \
-    hardcode_libdir_flag_spec \
-    hardcode_libdir_flag_spec_ld \
-    hardcode_libdir_separator \
-    hardcode_automatic \
-    module_cmds \
-    module_expsym_cmds \
-    lt_cv_prog_compiler_c_o \
-    exclude_expsyms \
-    include_expsyms; do
-
-    case $var in
-    old_archive_cmds | \
-    old_archive_from_new_cmds | \
-    archive_cmds | \
-    archive_expsym_cmds | \
-    module_cmds | \
-    module_expsym_cmds | \
-    old_archive_from_expsyms_cmds | \
-    export_symbols_cmds | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  { echo "$as_me:$LINENO: creating $ofile" >&5
-echo "$as_me: creating $ofile" >&6;}
-
-  cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
 
+striplib=
+old_striplib=
+{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
-  withval=$with_tags; tagnames="$withval"
-fi
-
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
     else
-      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-    "") ;;
-    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-echo "$as_me: error: invalid tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-   { (exit 1); exit 1; }; }
+      { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
     fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-hardcode_shlibpath_var_CXX=unsupported
-hardcode_automatic_CXX=no
-module_cmds_CXX=
-module_expsym_cmds_CXX=
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-enable_shared_with_static_runtimes_CXX=no
-
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-objext_CXX=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
-  lt_prog_compiler_no_builtin_flag_CXX=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
     ;;
   *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
+    { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
-  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-else
-  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      whole_archive_flag_spec_CXX=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    archive_cmds_CXX=''
-    hardcode_direct_CXX=yes
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  hardcode_direct_CXX=yes
-	else
-	  # We have old collect2
-	  hardcode_direct_CXX=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L_CXX=yes
-	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  hardcode_libdir_separator_CXX=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    always_export_symbols_CXX=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag_CXX='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag_CXX="-z nodefs"
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
 
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	no_undefined_flag_CXX=' ${wl}-bernotok'
-	allow_undefined_flag_CXX=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	whole_archive_flag_spec_CXX='$convenience'
-	archive_cmds_need_lc_CXX=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
 
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag_CXX=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-    ;;
 
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
+  # Report which library types will actually be built
+  { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
 
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-    # as there is no search path for DLLs.
-    hardcode_libdir_flag_spec_CXX='-L$libdir'
-    allow_undefined_flag_CXX=unsupported
-    always_export_symbols_CXX=no
-    enable_shared_with_static_runtimes_CXX=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-        case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-        esac
-      archive_cmds_need_lc_CXX=no
-      hardcode_direct_CXX=no
-      hardcode_automatic_CXX=yes
-      hardcode_shlibpath_var_CXX=unsupported
-      whole_archive_flag_spec_CXX=''
-      link_all_deplibs_CXX=yes
-
-    if test "$GXX" = yes ; then
-      lt_int_apple_cc_single_mod=no
-      output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-       lt_int_apple_cc_single_mod=yes
-      fi
-      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      else
-          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-        fi
-        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          else
-            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          fi
-            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_CXX=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  freebsd[12]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    ld_shlibs_CXX=no
-    ;;
-  freebsd-elf*)
-    archive_cmds_need_lc_CXX=no
-    ;;
-  freebsd* | kfreebsd*-gnu | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    ld_shlibs_CXX=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    hardcode_direct_CXX=yes
-    hardcode_minus_L_CXX=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      ld_shlibs_CXX=no
-      ;;
-    aCC*)
-      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        ld_shlibs_CXX=no
-      fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_CXX=:
-
-      case $host_cpu in
-      hppa*64*|ia64*)
-	hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
-        ;;
-      *)
-	export_dynamic_flag_spec_CXX='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      hardcode_direct_CXX=no
-      hardcode_shlibpath_var_CXX=no
-      ;;
-    *)
-      hardcode_direct_CXX=yes
-      hardcode_minus_L_CXX=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
-    esac
-
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    hppa*64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    *)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  interix3*)
-    hardcode_direct_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	link_all_deplibs_CXX=yes
-	;;
-    esac
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    ;;
-  linux*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	esac
-	archive_cmds_need_lc_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC*)
-        # Portland Group C++ compiler
-	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+  { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
 
-	runpath_var=LD_RUN_PATH
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      hardcode_libdir_flag_spec_CXX='-R$libdir'
-      hardcode_direct_CXX=yes
-      hardcode_shlibpath_var_CXX=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    ld_shlibs_CXX=no
-    ;;
-  openbsd*)
-    hardcode_direct_CXX=yes
-    hardcode_shlibpath_var_CXX=no
-    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-      export_dynamic_flag_spec_CXX='${wl}-E'
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    fi
-    output_verbose_link_cmd='echo'
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' -expect_unresolved \*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        archive_cmds_need_lc_CXX=yes
-	no_undefined_flag_CXX=' -zdefs'
-	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-R$libdir'
-	hardcode_shlibpath_var_CXX=no
-	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker. We must also pass each convience library through
-	    # to the system linker between allextract/defaultextract.
-	    # The C++ compiler will combine linker options so we
-	    # cannot just pass the convience library names through
-	    # without $wl.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	link_all_deplibs_CXX=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-    no_undefined_flag_CXX='${wl}-z,text'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    no_undefined_flag_CXX='${wl}-z,text'
-    allow_undefined_flag_CXX='${wl}-z,nodefs'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-    export_dynamic_flag_spec_CXX='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-esac
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-GCC_CXX="$GXX"
-LD_CXX="$LD"
-
-
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
-	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
-	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
-	 else
-	   predep_objects_CXX="$predep_objects_CXX $p"
-	 fi
-       else
-	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
-	 else
-	   postdep_objects_CXX="$postdep_objects_CXX $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling CXX test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-case $host_os in
-interix3*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  predep_objects_CXX=
-  postdep_objects_CXX=
-  postdeps_CXX=
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    postdeps_CXX='-lCstd -lCrun'
-    ;;
-  esac
-  ;;
-esac
-
-
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-esac
-
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    lt_prog_compiler_wl_CXX='-Wl,'
-    lt_prog_compiler_static_CXX='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_CXX='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_CXX='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      lt_prog_compiler_pic_CXX=
-      ;;
-    interix3*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_CXX=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	;;
-      *)
-	lt_prog_compiler_pic_CXX='-fPIC'
-	;;
-      esac
-      ;;
-    *)
-      lt_prog_compiler_pic_CXX='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix4* | aix5*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  lt_prog_compiler_static_CXX='-Bstatic'
-	else
-	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           lt_prog_compiler_pic_CXX='-qnocommon'
-           lt_prog_compiler_wl_CXX='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | kfreebsd*-gnu | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      lt_prog_compiler_pic_CXX='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      lt_prog_compiler_pic_CXX='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux*)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-static'
-	    ;;
-	  pgCC*)
-	    # Portland Group C++ compiler.
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-fpic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    lt_prog_compiler_pic_CXX='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    lt_prog_compiler_wl_CXX='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    lt_prog_compiler_pic_CXX='-pic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	lt_prog_compiler_can_build_shared_CXX=no
-	;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works_CXX=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12613: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:12617: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_CXX=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
-    case $lt_prog_compiler_pic_CXX in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-     esac
-else
-    lt_prog_compiler_pic_CXX=
-     lt_prog_compiler_can_build_shared_CXX=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_CXX=
-    ;;
-  *)
-    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_static_works_CXX=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_CXX=yes
-       fi
-     else
-       lt_prog_compiler_static_works_CXX=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
-
-if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
-    :
-else
-    lt_prog_compiler_static_CXX=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o_CXX=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12717: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:12721: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_CXX=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
-  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
   case $host_os in
-  aix4* | aix5*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  *)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_CXX" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_CXX=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_CXX in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_CXX
-	pic_flag=$lt_prog_compiler_pic_CXX
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-        allow_undefined_flag_CXX=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_CXX=no
-        else
-	  archive_cmds_need_lc_CXX=yes
-        fi
-        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
     fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
     ;;
-  freebsd*) # from 4.6 on
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
 
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix3*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-knetbsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var_CXX" || \
-   test "X$hardcode_automatic_CXX" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_CXX" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_CXX=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_CXX=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_CXX=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-
-if test "$hardcode_action_CXX" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_CXX \
-    CC_CXX \
-    LD_CXX \
-    lt_prog_compiler_wl_CXX \
-    lt_prog_compiler_pic_CXX \
-    lt_prog_compiler_static_CXX \
-    lt_prog_compiler_no_builtin_flag_CXX \
-    export_dynamic_flag_spec_CXX \
-    thread_safe_flag_spec_CXX \
-    whole_archive_flag_spec_CXX \
-    enable_shared_with_static_runtimes_CXX \
-    old_archive_cmds_CXX \
-    old_archive_from_new_cmds_CXX \
-    predep_objects_CXX \
-    postdep_objects_CXX \
-    predeps_CXX \
-    postdeps_CXX \
-    compiler_lib_search_path_CXX \
-    archive_cmds_CXX \
-    archive_expsym_cmds_CXX \
-    postinstall_cmds_CXX \
-    postuninstall_cmds_CXX \
-    old_archive_from_expsyms_cmds_CXX \
-    allow_undefined_flag_CXX \
-    no_undefined_flag_CXX \
-    export_symbols_cmds_CXX \
-    hardcode_libdir_flag_spec_CXX \
-    hardcode_libdir_flag_spec_ld_CXX \
-    hardcode_libdir_separator_CXX \
-    hardcode_automatic_CXX \
-    module_cmds_CXX \
-    module_expsym_cmds_CXX \
-    lt_cv_prog_compiler_c_o_CXX \
-    exclude_expsyms_CXX \
-    include_expsyms_CXX; do
-
-    case $var in
-    old_archive_cmds_CXX | \
-    old_archive_from_new_cmds_CXX | \
-    archive_cmds_CXX | \
-    archive_expsym_cmds_CXX | \
-    module_cmds_CXX | \
-    module_expsym_cmds_CXX | \
-    old_archive_from_expsyms_cmds_CXX | \
-    export_symbols_cmds_CXX | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
     ;;
   esac
+  { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
 
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_CXX
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_CXX
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
+  { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_CXX"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
 fi
-
-
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="      program t\n      end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-GCC_F77="$G77"
-LD_F77="$LD"
-
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_F77='-Wl,'
-    lt_prog_compiler_static_F77='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_F77='-fno-common'
-      ;;
-
-    interix3*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_F77=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_F77=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='-fPIC'
-	;;
-      esac
-      ;;
-
-    *)
-      lt_prog_compiler_pic_F77='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      else
-	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_F77='-qnocommon'
-         lt_prog_compiler_wl_F77='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    linux*)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-KPIC'
-	lt_prog_compiler_static_F77='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-fpic'
-	lt_prog_compiler_static_F77='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_F77='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_F77='-non_shared'
-        ;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_F77='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_F77='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl_F77='-Qoption ld '
-      lt_prog_compiler_pic_F77='-PIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_F77='-Kconform_pic'
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic_F77='-pic'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_F77"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works_F77=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_F77"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14287: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:14291: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_F77=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
-    case $lt_prog_compiler_pic_F77 in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-     esac
-else
-    lt_prog_compiler_pic_F77=
-     lt_prog_compiler_can_build_shared_F77=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_F77=
-    ;;
-  *)
-    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_static_works_F77=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_F77=yes
-       fi
-     else
-       lt_prog_compiler_static_works_F77=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
-
-if test x"$lt_prog_compiler_static_works_F77" = xyes; then
-    :
-else
-    lt_prog_compiler_static_F77=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o_F77=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14391: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:14395: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_F77=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
-  runpath_var=
-  allow_undefined_flag_F77=
-  enable_shared_with_static_runtimes_F77=no
-  archive_cmds_F77=
-  archive_expsym_cmds_F77=
-  old_archive_From_new_cmds_F77=
-  old_archive_from_expsyms_cmds_F77=
-  export_dynamic_flag_spec_F77=
-  whole_archive_flag_spec_F77=
-  thread_safe_flag_spec_F77=
-  hardcode_libdir_flag_spec_F77=
-  hardcode_libdir_flag_spec_ld_F77=
-  hardcode_libdir_separator_F77=
-  hardcode_direct_F77=no
-  hardcode_minus_L_F77=no
-  hardcode_shlibpath_var_F77=unsupported
-  link_all_deplibs_F77=unknown
-  hardcode_automatic_F77=no
-  module_cmds_F77=
-  module_expsym_cmds_F77=
-  always_export_symbols_F77=no
-  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_F77=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs_F77=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_F77=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_F77=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_F77=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=no
-      enable_shared_with_static_runtimes_F77=yes
-      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
+CC="$lt_save_CC"
 
-    interix3*)
-      hardcode_direct_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_F77='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
 
-    linux*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
 
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_F77=no
-	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
 
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_F77=no
-	  fi
-	;;
-      esac
-      ;;
 
-    sunos4*)
-      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-    esac
 
-    if test "$ld_shlibs_F77" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_F77=
-      export_dynamic_flag_spec_F77=
-      whole_archive_flag_spec_F77=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=yes
-      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_F77=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_F77=unsupported
-      fi
-      ;;
+        ac_config_commands="$ac_config_commands libtool"
 
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      archive_cmds_F77=''
-      hardcode_direct_F77=yes
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
 
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  hardcode_direct_F77=yes
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_F77=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_F77=yes
-  	  hardcode_libdir_flag_spec_F77='-L$libdir'
-  	  hardcode_libdir_separator_F77=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
 
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_F77=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_F77='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-      program main
+# Only expand once:
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
 
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_F77="-z nodefs"
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-      program main
-
-      end
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_F77=' ${wl}-bernotok'
-	  allow_undefined_flag_F77=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_F77='$convenience'
-	  archive_cmds_need_lc_F77=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_F77=no
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec_F77=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_F77=' '
-      allow_undefined_flag_F77=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_F77='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_F77=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_F77=no
-      hardcode_direct_F77=no
-      hardcode_automatic_F77=yes
-      hardcode_shlibpath_var_F77=unsupported
-      whole_archive_flag_spec_F77=''
-      link_all_deplibs_F77=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_F77=no
-          ;;
-      esac
-    fi
-      ;;
-
-    dgux*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs_F77=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
-      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_direct_F77=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
-
-	hardcode_direct_F77=yes
-	export_dynamic_flag_spec_F77='${wl}-E'
-
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_F77=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
-	  ;;
-	*)
-	  hardcode_direct_F77=yes
-	  export_dynamic_flag_spec_F77='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_F77=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      link_all_deplibs_F77=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    newsos6)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    openbsd*)
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_F77='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_F77='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      allow_undefined_flag_F77=unsupported
-      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_F77=:
-      ;;
-
-    solaris*)
-      no_undefined_flag_F77=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_shlibpath_var_F77=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
-      esac
-      link_all_deplibs_F77=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_F77='$CC -r -o $output$reload_objs'
-	  hardcode_direct_F77=no
-        ;;
-	motorola)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_F77=no
-      export_dynamic_flag_spec_F77='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_F77=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_F77=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
-      no_undefined_flag_F77='${wl}-z,text'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_F77='${wl}-z,text'
-      allow_undefined_flag_F77='${wl}-z,nodefs'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    *)
-      ld_shlibs_F77=no
-      ;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_F77" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_F77=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_F77 in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_F77
-	pic_flag=$lt_prog_compiler_pic_F77
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-        allow_undefined_flag_F77=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_F77=no
-        else
-	  archive_cmds_need_lc_F77=yes
-        fi
-        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  freebsd*) # from 4.6 on
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix3*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
   *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-knetbsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
+    eval ac_cv_prog_make_${ac_make}_set=no;;
 esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
-   test -n "$runpath_var_F77" || \
-   test "X$hardcode_automatic_F77" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_F77" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-     test "$hardcode_minus_L_F77" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_F77=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_F77=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_F77=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-echo "${ECHO_T}$hardcode_action_F77" >&6; }
-
-if test "$hardcode_action_F77" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_F77 \
-    CC_F77 \
-    LD_F77 \
-    lt_prog_compiler_wl_F77 \
-    lt_prog_compiler_pic_F77 \
-    lt_prog_compiler_static_F77 \
-    lt_prog_compiler_no_builtin_flag_F77 \
-    export_dynamic_flag_spec_F77 \
-    thread_safe_flag_spec_F77 \
-    whole_archive_flag_spec_F77 \
-    enable_shared_with_static_runtimes_F77 \
-    old_archive_cmds_F77 \
-    old_archive_from_new_cmds_F77 \
-    predep_objects_F77 \
-    postdep_objects_F77 \
-    predeps_F77 \
-    postdeps_F77 \
-    compiler_lib_search_path_F77 \
-    archive_cmds_F77 \
-    archive_expsym_cmds_F77 \
-    postinstall_cmds_F77 \
-    postuninstall_cmds_F77 \
-    old_archive_from_expsyms_cmds_F77 \
-    allow_undefined_flag_F77 \
-    no_undefined_flag_F77 \
-    export_symbols_cmds_F77 \
-    hardcode_libdir_flag_spec_F77 \
-    hardcode_libdir_flag_spec_ld_F77 \
-    hardcode_libdir_separator_F77 \
-    hardcode_automatic_F77 \
-    module_cmds_F77 \
-    module_expsym_cmds_F77 \
-    lt_cv_prog_compiler_c_o_F77 \
-    exclude_expsyms_F77 \
-    include_expsyms_F77; do
-
-    case $var in
-    old_archive_cmds_F77 | \
-    old_archive_from_new_cmds_F77 | \
-    archive_cmds_F77 | \
-    archive_expsym_cmds_F77 | \
-    module_cmds_F77 | \
-    module_expsym_cmds_F77 | \
-    old_archive_from_expsyms_cmds_F77 | \
-    export_symbols_cmds_F77 | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_F77
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_F77
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_F77"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
-
-old_archive_cmds_GCJ=$old_archive_cmds
-
-
-lt_prog_compiler_no_builtin_flag_GCJ=
-
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16589: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:16593: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
-
+rm -f conftest.make
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
 else
-    :
-fi
-
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
 fi
 
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_GCJ='-Wl,'
-    lt_prog_compiler_static_GCJ='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
 
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-      ;;
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_GCJ='-fno-common'
-      ;;
-
-    interix3*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_GCJ=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_GCJ=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='-fPIC'
-	;;
-      esac
-      ;;
-
-    *)
-      lt_prog_compiler_pic_GCJ='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      else
-	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_GCJ='-qnocommon'
-         lt_prog_compiler_wl_GCJ='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='+Z'
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `$CC -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
 	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    linux*)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-KPIC'
-	lt_prog_compiler_static_GCJ='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-fpic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_GCJ='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_GCJ='-non_shared'
-        ;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_GCJ='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl_GCJ='-Qoption ld '
-      lt_prog_compiler_pic_GCJ='-PIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_GCJ='-Kconform_pic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic_GCJ='-pic'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
     esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_pic_works_GCJ=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16857: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:16861: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_GCJ=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
-    case $lt_prog_compiler_pic_GCJ in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-     esac
-else
-    lt_prog_compiler_pic_GCJ=
-     lt_prog_compiler_can_build_shared_GCJ=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_GCJ=
-    ;;
-  *)
-    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+    { $as_echo "$as_me:$LINENO: checking whether __SUNPRO_C is declared" >&5
+$as_echo_n "checking whether __SUNPRO_C is declared... " >&6; }
+if test "${ac_cv_have_decl___SUNPRO_C+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  lt_prog_compiler_static_works_GCJ=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_GCJ=yes
-       fi
-     else
-       lt_prog_compiler_static_works_GCJ=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
-    :
-else
-    lt_prog_compiler_static_GCJ=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o_GCJ=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16961: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:16965: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_GCJ=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
-  runpath_var=
-  allow_undefined_flag_GCJ=
-  enable_shared_with_static_runtimes_GCJ=no
-  archive_cmds_GCJ=
-  archive_expsym_cmds_GCJ=
-  old_archive_From_new_cmds_GCJ=
-  old_archive_from_expsyms_cmds_GCJ=
-  export_dynamic_flag_spec_GCJ=
-  whole_archive_flag_spec_GCJ=
-  thread_safe_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_ld_GCJ=
-  hardcode_libdir_separator_GCJ=
-  hardcode_direct_GCJ=no
-  hardcode_minus_L_GCJ=no
-  hardcode_shlibpath_var_GCJ=unsupported
-  link_all_deplibs_GCJ=unknown
-  hardcode_automatic_GCJ=no
-  module_cmds_GCJ=
-  module_expsym_cmds_GCJ=
-  always_export_symbols_GCJ=no
-  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_GCJ=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs_GCJ=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_GCJ=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_GCJ=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_GCJ=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=no
-      enable_shared_with_static_runtimes_GCJ=yes
-      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    interix3*)
-      hardcode_direct_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    linux*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_GCJ=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_GCJ=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs_GCJ" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_GCJ=
-      export_dynamic_flag_spec_GCJ=
-      whole_archive_flag_spec_GCJ=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=yes
-      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_GCJ=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_GCJ=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds_GCJ=''
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  hardcode_direct_GCJ=yes
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_GCJ=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_GCJ=yes
-  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-  	  hardcode_libdir_separator_GCJ=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_GCJ=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_GCJ='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
+  cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-
+$ac_includes_default
 int
 main ()
 {
+#ifndef __SUNPRO_C
+  (void) __SUNPRO_C;
+#endif
 
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+       } && test -s conftest.$ac_objext; then
+  ac_cv_have_decl___SUNPRO_C=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-
+	ac_cv_have_decl___SUNPRO_C=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_GCJ="-z nodefs"
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_GCJ=' ${wl}-bernotok'
-	  allow_undefined_flag_GCJ=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_GCJ='$convenience'
-	  archive_cmds_need_lc_GCJ=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_GCJ=no
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec_GCJ=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ=' '
-      allow_undefined_flag_GCJ=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_GCJ='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_GCJ=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_GCJ=no
-      hardcode_direct_GCJ=no
-      hardcode_automatic_GCJ=yes
-      hardcode_shlibpath_var_GCJ=unsupported
-      whole_archive_flag_spec_GCJ=''
-      link_all_deplibs_GCJ=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_GCJ=no
-          ;;
-      esac
-    fi
-      ;;
-
-    dgux*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs_GCJ=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
-      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_direct_GCJ=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-
-	hardcode_direct_GCJ=yes
-	export_dynamic_flag_spec_GCJ='${wl}-E'
-
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_GCJ=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
-	  ;;
-	*)
-	  hardcode_direct_GCJ=yes
-	  export_dynamic_flag_spec_GCJ='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_GCJ=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    newsos6)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    openbsd*)
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_GCJ='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      allow_undefined_flag_GCJ=unsupported
-      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    solaris*)
-      no_undefined_flag_GCJ=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
-      esac
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-	  hardcode_direct_GCJ=no
-        ;;
-	motorola)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_GCJ=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_GCJ=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
-      no_undefined_flag_GCJ='${wl}-z,text'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_GCJ='${wl}-z,text'
-      allow_undefined_flag_GCJ='${wl}-z,nodefs'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      ld_shlibs_GCJ=no
-      ;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_GCJ=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_GCJ in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_GCJ
-	pic_flag=$lt_prog_compiler_pic_GCJ
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-        allow_undefined_flag_GCJ=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_GCJ=no
-        else
-	  archive_cmds_need_lc_GCJ=yes
-        fi
-        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___SUNPRO_C" >&5
+$as_echo "$ac_cv_have_decl___SUNPRO_C" >&6; }
+if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then
+  SUNCC="yes"
 else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  SUNCC="no"
 fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
 
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  freebsd*) # from 4.6 on
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix3*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-knetbsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var_GCJ" || \
-   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_GCJ" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-     test "$hardcode_minus_L_GCJ" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_GCJ=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_GCJ=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_GCJ=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-
-if test "$hardcode_action_GCJ" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_GCJ \
-    CC_GCJ \
-    LD_GCJ \
-    lt_prog_compiler_wl_GCJ \
-    lt_prog_compiler_pic_GCJ \
-    lt_prog_compiler_static_GCJ \
-    lt_prog_compiler_no_builtin_flag_GCJ \
-    export_dynamic_flag_spec_GCJ \
-    thread_safe_flag_spec_GCJ \
-    whole_archive_flag_spec_GCJ \
-    enable_shared_with_static_runtimes_GCJ \
-    old_archive_cmds_GCJ \
-    old_archive_from_new_cmds_GCJ \
-    predep_objects_GCJ \
-    postdep_objects_GCJ \
-    predeps_GCJ \
-    postdeps_GCJ \
-    compiler_lib_search_path_GCJ \
-    archive_cmds_GCJ \
-    archive_expsym_cmds_GCJ \
-    postinstall_cmds_GCJ \
-    postuninstall_cmds_GCJ \
-    old_archive_from_expsyms_cmds_GCJ \
-    allow_undefined_flag_GCJ \
-    no_undefined_flag_GCJ \
-    export_symbols_cmds_GCJ \
-    hardcode_libdir_flag_spec_GCJ \
-    hardcode_libdir_flag_spec_ld_GCJ \
-    hardcode_libdir_separator_GCJ \
-    hardcode_automatic_GCJ \
-    module_cmds_GCJ \
-    module_expsym_cmds_GCJ \
-    lt_cv_prog_compiler_c_o_GCJ \
-    exclude_expsyms_GCJ \
-    include_expsyms_GCJ; do
-
-    case $var in
-    old_archive_cmds_GCJ | \
-    old_archive_from_new_cmds_GCJ | \
-    archive_cmds_GCJ | \
-    archive_expsym_cmds_GCJ | \
-    module_cmds_GCJ | \
-    module_expsym_cmds_GCJ | \
-    old_archive_from_expsyms_cmds_GCJ | \
-    export_symbols_cmds_GCJ | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_GCJ"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
 fi
 
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-lt_cv_prog_compiler_c_o_RC=yes
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_RC \
-    CC_RC \
-    LD_RC \
-    lt_prog_compiler_wl_RC \
-    lt_prog_compiler_pic_RC \
-    lt_prog_compiler_static_RC \
-    lt_prog_compiler_no_builtin_flag_RC \
-    export_dynamic_flag_spec_RC \
-    thread_safe_flag_spec_RC \
-    whole_archive_flag_spec_RC \
-    enable_shared_with_static_runtimes_RC \
-    old_archive_cmds_RC \
-    old_archive_from_new_cmds_RC \
-    predep_objects_RC \
-    postdep_objects_RC \
-    predeps_RC \
-    postdeps_RC \
-    compiler_lib_search_path_RC \
-    archive_cmds_RC \
-    archive_expsym_cmds_RC \
-    postinstall_cmds_RC \
-    postuninstall_cmds_RC \
-    old_archive_from_expsyms_cmds_RC \
-    allow_undefined_flag_RC \
-    no_undefined_flag_RC \
-    export_symbols_cmds_RC \
-    hardcode_libdir_flag_spec_RC \
-    hardcode_libdir_flag_spec_ld_RC \
-    hardcode_libdir_separator_RC \
-    hardcode_automatic_RC \
-    module_cmds_RC \
-    module_expsym_cmds_RC \
-    lt_cv_prog_compiler_c_o_RC \
-    exclude_expsyms_RC \
-    include_expsyms_RC; do
-
-    case $var in
-    old_archive_cmds_RC | \
-    old_archive_from_new_cmds_RC | \
-    archive_cmds_RC | \
-    archive_expsym_cmds_RC | \
-    module_cmds_RC | \
-    module_expsym_cmds_RC | \
-    old_archive_from_expsyms_cmds_RC | \
-    export_symbols_cmds_RC | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_RC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_RC
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_RC"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then
+  enableval=$enable_silent_rules;
 fi
 
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	;;
-
-      *)
-	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-fi
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
-	@echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
-  *@@@%%%=?*=@@@%%%*)
-    eval ac_cv_prog_make_${ac_make}_set=yes;;
-  *)
-    eval ac_cv_prog_make_${ac_make}_set=no;;
+case $enable_silent_rules in
+yes) AM_DEFAULT_VERBOSITY=0;;
+no)  AM_DEFAULT_VERBOSITY=1;;
+*)   AM_DEFAULT_VERBOSITY=0;;
 esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-  SET_MAKE=
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
+AM_BACKSLASH='\'
+
 
 
 
@@ -19657,10 +11663,10 @@ if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
 	if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
 set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $PKG_CONFIG in
   [\\/]* | ?:[\\/]*)
@@ -19675,7 +11681,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -19687,11 +11693,11 @@ esac
 fi
 PKG_CONFIG=$ac_cv_path_PKG_CONFIG
 if test -n "$PKG_CONFIG"; then
-  { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-echo "${ECHO_T}$PKG_CONFIG" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -19700,10 +11706,10 @@ if test -z "$ac_cv_path_PKG_CONFIG"; then
   ac_pt_PKG_CONFIG=$PKG_CONFIG
   # Extract the first word of "pkg-config", so it can be a program name with args.
 set dummy pkg-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $ac_pt_PKG_CONFIG in
   [\\/]* | ?:[\\/]*)
@@ -19718,7 +11724,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -19730,11 +11736,11 @@ esac
 fi
 ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
 if test -n "$ac_pt_PKG_CONFIG"; then
-  { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
-echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
   if test "x$ac_pt_PKG_CONFIG" = x; then
@@ -19742,12 +11748,8 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
     PKG_CONFIG=$ac_pt_PKG_CONFIG
@@ -19759,114 +11761,131 @@ fi
 fi
 if test -n "$PKG_CONFIG"; then
 	_pkg_min_version=0.9.0
-	{ echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
-echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; }
+	{ $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
 	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+		{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 	else
-		{ echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+		{ $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 		PKG_CONFIG=""
 	fi
 
 fi
 
 pkg_failed=no
-{ echo "$as_me:$LINENO: checking for XAU" >&5
-echo $ECHO_N "checking for XAU... $ECHO_C" >&6; }
-
-if test -n "$PKG_CONFIG"; then
-        if test -n "$PKG_CONFIG" && \
-    { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xproto\"") >&5
+{ $as_echo "$as_me:$LINENO: checking for XAU" >&5
+$as_echo_n "checking for XAU... " >&6; }
+
+if test -n "$XAU_CFLAGS"; then
+    pkg_cv_XAU_CFLAGS="$XAU_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xproto\"") >&5
   ($PKG_CONFIG --exists --print-errors "xproto") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   pkg_cv_XAU_CFLAGS=`$PKG_CONFIG --cflags "xproto" 2>/dev/null`
 else
   pkg_failed=yes
 fi
-else
-	pkg_failed=untried
+ else
+    pkg_failed=untried
 fi
-if test -n "$PKG_CONFIG"; then
-        if test -n "$PKG_CONFIG" && \
-    { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xproto\"") >&5
+if test -n "$XAU_LIBS"; then
+    pkg_cv_XAU_LIBS="$XAU_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xproto\"") >&5
   ($PKG_CONFIG --exists --print-errors "xproto") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   pkg_cv_XAU_LIBS=`$PKG_CONFIG --libs "xproto" 2>/dev/null`
 else
   pkg_failed=yes
 fi
-else
-	pkg_failed=untried
+ else
+    pkg_failed=untried
 fi
 
+
+
 if test $pkg_failed = yes; then
-	XAU_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xproto"`
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        XAU_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "xproto" 2>&1`
+        else
+	        XAU_PKG_ERRORS=`$PKG_CONFIG --print-errors "xproto" 2>&1`
+        fi
 	# Put the nasty error message in config.log where it belongs
-	echo "$XAU_PKG_ERRORS" 1>&5
+	echo "$XAU_PKG_ERRORS" >&5
+
+	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xproto) were not met:
+
+$XAU_PKG_ERRORS
 
-	{ { echo "$as_me:$LINENO: error: Package requirements (xproto) were not met.
 Consider adjusting the PKG_CONFIG_PATH environment variable if you
 installed software in a non-standard prefix.
 
-Alternatively you may set the XAU_CFLAGS and XAU_LIBS environment variables
-to avoid the need to call pkg-config.  See the pkg-config man page for
-more details." >&5
-echo "$as_me: error: Package requirements (xproto) were not met.
+Alternatively, you may set the environment variables XAU_CFLAGS
+and XAU_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.
+" >&5
+$as_echo "$as_me: error: Package requirements (xproto) were not met:
+
+$XAU_PKG_ERRORS
+
 Consider adjusting the PKG_CONFIG_PATH environment variable if you
 installed software in a non-standard prefix.
 
-Alternatively you may set the XAU_CFLAGS and XAU_LIBS environment variables
-to avoid the need to call pkg-config.  See the pkg-config man page for
-more details." >&2;}
+Alternatively, you may set the environment variables XAU_CFLAGS
+and XAU_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.
+" >&2;}
    { (exit 1); exit 1; }; }
 elif test $pkg_failed = untried; then
-	{ { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
-Alternatively you may set the XAU_CFLAGS and XAU_LIBS environment variables
-to avoid the need to call pkg-config.  See the pkg-config man page for
-more details.
+Alternatively, you may set the environment variables XAU_CFLAGS
+and XAU_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.
 
-To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.
 See \`config.log' for more details." >&5
-echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
-Alternatively you may set the XAU_CFLAGS and XAU_LIBS environment variables
-to avoid the need to call pkg-config.  See the pkg-config man page for
-more details.
+Alternatively, you may set the environment variables XAU_CFLAGS
+and XAU_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.
 
-To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 else
 	XAU_CFLAGS=$pkg_cv_XAU_CFLAGS
 	XAU_LIBS=$pkg_cv_XAU_LIBS
-        { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+        { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 	:
 fi
+XAU_CFLAGS="$CWARNFLAGS $XAU_CFLAGS"
 
 
 
-kerberos=false
- if test x$kerberos = xtrue; then
-  KERBEROS_TRUE=
-  KERBEROS_FALSE='#'
-else
-  KERBEROS_TRUE='#'
-  KERBEROS_FALSE=
-fi
-
-
 # Check whether --enable-xthreads was given.
 if test "${enable_xthreads+set}" = set; then
   enableval=$enable_xthreads; xthreads=$enableval
@@ -19881,10 +11900,10 @@ cat >>confdefs.h <<\_ACEOF
 #define XTHREADS 1
 _ACEOF
 
-    { echo "$as_me:$LINENO: checking for gethostbyname_r in -lc" >&5
-echo $ECHO_N "checking for gethostbyname_r in -lc... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for gethostbyname_r in -lc" >&5
+$as_echo_n "checking for gethostbyname_r in -lc... " >&6; }
 if test "${ac_cv_lib_c_gethostbyname_r+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lc  $LIBS"
@@ -19916,41 +11935,45 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_c_gethostbyname_r=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_c_gethostbyname_r=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_c_gethostbyname_r" >&5
-echo "${ECHO_T}$ac_cv_lib_c_gethostbyname_r" >&6; }
-if test $ac_cv_lib_c_gethostbyname_r = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_c_gethostbyname_r" >&5
+$as_echo "$ac_cv_lib_c_gethostbyname_r" >&6; }
+if test "x$ac_cv_lib_c_gethostbyname_r" = x""yes; then
   mtsafe=yes
 fi
 
     if test "x$mtsafe" = "x" ; then
-	{ echo "$as_me:$LINENO: checking for gethostbyname_r in -lnsl" >&5
-echo $ECHO_N "checking for gethostbyname_r in -lnsl... $ECHO_C" >&6; }
+	{ $as_echo "$as_me:$LINENO: checking for gethostbyname_r in -lnsl" >&5
+$as_echo_n "checking for gethostbyname_r in -lnsl... " >&6; }
 if test "${ac_cv_lib_nsl_gethostbyname_r+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lnsl  $LIBS"
@@ -19982,33 +12005,37 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && {
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_nsl_gethostbyname_r=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_nsl_gethostbyname_r=no
 fi
 
+rm -rf conftest.dSYM
 rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname_r" >&5
-echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname_r" >&6; }
-if test $ac_cv_lib_nsl_gethostbyname_r = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname_r" >&5
+$as_echo "$ac_cv_lib_nsl_gethostbyname_r" >&6; }
+if test "x$ac_cv_lib_nsl_gethostbyname_r" = x""yes; then
   mtsafe=yes
 fi
 
@@ -20080,8 +12107,8 @@ fi
 
 if test "x$make_lint_lib" != "xno" ; then
 	if test "x$LINT" = "xno" ; then
-		{ { echo "$as_me:$LINENO: error: Cannot make lint library without --with-lint" >&5
-echo "$as_me: error: Cannot make lint library without --with-lint" >&2;}
+		{ { $as_echo "$as_me:$LINENO: error: Cannot make lint library without --with-lint" >&5
+$as_echo "$as_me: error: Cannot make lint library without --with-lint" >&2;}
    { (exit 1); exit 1; }; }
 	fi
 	if test "x$make_lint_lib" = "xyes" ; then
@@ -20103,13 +12130,6 @@ fi
 
 LINT_FLAGS="${LINT_FLAGS} ${XAU_CFLAGS}"
 
-if test "x$GCC" = "xyes"; then
-	GCC_WARNINGS="-Wall -Wpointer-arith -Wstrict-prototypes \
-	-Wmissing-prototypes -Wmissing-declarations \
-	-Wnested-externs -fno-strict-aliasing"
-	XAU_CFLAGS="$GCC_WARNINGS $XAU_CFLAGS"
-fi
-
 
 
 
@@ -20193,8 +12213,8 @@ fi
 	if test "x$RELEASE_VERSION" != "x"; then
 		PACKAGE="$PACKAGE-$RELEASE_VERSION"
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-		{ echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
-echo "$as_me: Building with package name set to $PACKAGE" >&6;}
+		{ $as_echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
+$as_echo "$as_me: Building with package name set to $PACKAGE" >&6;}
 	fi
 
 cat >>confdefs.h <<_ACEOF
@@ -20221,6 +12241,14 @@ _ACEOF
 
 
 
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+
+distcleancheck_listfiles='find . -type f ! -name ChangeLog -print'
+
+
+
 ac_config_files="$ac_config_files Makefile xau.pc"
 
 cat >confcache <<\_ACEOF
@@ -20250,11 +12278,12 @@ _ACEOF
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -20287,12 +12316,12 @@ echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
     test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -20308,7 +12337,7 @@ ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
   # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
   #    will be set to the directory where LIBOBJS objects are built.
   ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
@@ -20319,62 +12348,57 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
 if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
+$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${KERBEROS_TRUE}" && test -z "${KERBEROS_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"KERBEROS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"KERBEROS\" was never defined.
+$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 if test -z "${LINT_TRUE}" && test -z "${LINT_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"LINT\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"LINT\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"LINT\" was never defined.
+$as_echo "$as_me: error: conditional \"LINT\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 if test -z "${MAKE_LINT_LIB_TRUE}" && test -z "${MAKE_LINT_LIB_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"MAKE_LINT_LIB\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"MAKE_LINT_LIB\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAKE_LINT_LIB\" was never defined.
+$as_echo "$as_me: error: conditional \"MAKE_LINT_LIB\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -20387,7 +12411,7 @@ ac_cs_silent=false
 SHELL=\${CONFIG_SHELL-$SHELL}
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
@@ -20397,7 +12421,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -20419,17 +12443,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -20445,8 +12497,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -20469,7 +12519,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -20482,17 +12532,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -20514,7 +12557,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
 	    s//\1/
 	    q
@@ -20565,7 +12608,7 @@ $as_unset CDPATH
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -20593,7 +12636,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -20606,19 +12648,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -20643,10 +12688,10 @@ else
   as_test_x='
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+	test -d "$1/.";
       else
 	case $1 in
-        -*)set "./$1";;
+	-*)set "./$1";;
 	esac;
 	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
 	???[sx]*):;;*)false;;esac;fi
@@ -20668,8 +12713,8 @@ exec 6>&1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libXau $as_me 1.0.4, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+This file was extended by libXau $as_me 1.0.5, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -20682,7 +12727,16 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q`
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 # Files that config.status was made for.
 config_files="$ac_config_files"
 config_headers="$ac_config_headers"
@@ -20690,22 +12744,23 @@ config_commands="$ac_config_commands"
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [FILE]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number and configuration settings, then exit
-  -q, --quiet      do not print progress messages
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
 
 Configuration files:
 $config_files
@@ -20719,13 +12774,13 @@ $config_commands
 Report bugs to <bug-autoconf@gnu.org>."
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-libXau config.status 1.0.4
-configured by $0, generated by GNU Autoconf 2.61,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+libXau config.status 1.0.5
+configured by $0, generated by GNU Autoconf 2.63,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -20733,11 +12788,12 @@ ac_pwd='$ac_pwd'
 srcdir='$srcdir'
 INSTALL='$INSTALL'
 MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
@@ -20759,30 +12815,36 @@ do
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
+    $as_echo "$ac_cs_version"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
     ac_need_defaults=false;;
   --header | --heade | --head | --hea )
     $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
     ac_need_defaults=false;;
   --he | --h)
     # Conflict between --help and --header
-    { echo "$as_me: error: ambiguous option: $1
+    { $as_echo "$as_me: error: ambiguous option: $1
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; };;
   --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
@@ -20801,35 +12863,293 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
   export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  exec "\$@"
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 exec 5>>config.log
 {
   echo
   sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
 ## Running $as_me. ##
 _ASBOX
-  echo "$ac_log"
+  $as_echo "$ac_log"
 } >&5
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #
 # INIT-COMMANDS
 #
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+  ;;
+esac
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
 # Handling of arguments.
 for ac_config_target in $ac_config_targets
@@ -20837,11 +13157,12 @@ do
   case $ac_config_target in
     "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "xau.pc") CONFIG_FILES="$CONFIG_FILES xau.pc" ;;
 
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
@@ -20882,239 +13203,144 @@ $debug ||
   (umask 077 && mkdir "$tmp")
 } ||
 {
-   echo "$me: cannot create a temporary directory in ." >&2
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
 if test -n "$CONFIG_FILES"; then
 
-_ACEOF
-
 
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-am__isrc!$am__isrc$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
-MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
-MAINT!$MAINT$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-DEPDIR!$DEPDIR$ac_delim
-am__include!$am__include$ac_delim
-am__quote!$am__quote$ac_delim
-AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-CCDEPMODE!$CCDEPMODE$ac_delim
-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-LN_S!$LN_S$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-ECHO!$ECHO$ac_delim
-AR!$AR$ac_delim
-RANLIB!$RANLIB$ac_delim
-DLLTOOL!$DLLTOOL$ac_delim
-AS!$AS$ac_delim
-OBJDUMP!$OBJDUMP$ac_delim
-CPP!$CPP$ac_delim
-CXX!$CXX$ac_delim
-_ACEOF
-
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
-    break
-  elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
+ac_cr='
'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
 fi
 
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
 _ACEOF
 
 
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-CXXFLAGS!$CXXFLAGS$ac_delim
-ac_ct_CXX!$ac_ct_CXX$ac_delim
-CXXDEPMODE!$CXXDEPMODE$ac_delim
-am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
-am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
-CXXCPP!$CXXCPP$ac_delim
-F77!$F77$ac_delim
-FFLAGS!$FFLAGS$ac_delim
-ac_ct_F77!$ac_ct_F77$ac_delim
-LIBTOOL!$LIBTOOL$ac_delim
-PKG_CONFIG!$PKG_CONFIG$ac_delim
-XAU_CFLAGS!$XAU_CFLAGS$ac_delim
-XAU_LIBS!$XAU_LIBS$ac_delim
-KERBEROS_TRUE!$KERBEROS_TRUE$ac_delim
-KERBEROS_FALSE!$KERBEROS_FALSE$ac_delim
-LINT!$LINT$ac_delim
-LINT_FLAGS!$LINT_FLAGS$ac_delim
-LINT_TRUE!$LINT_TRUE$ac_delim
-LINT_FALSE!$LINT_FALSE$ac_delim
-LINTLIB!$LINTLIB$ac_delim
-MAKE_LINT_LIB_TRUE!$MAKE_LINT_LIB_TRUE$ac_delim
-MAKE_LINT_LIB_FALSE!$MAKE_LINT_LIB_FALSE$ac_delim
-APP_MAN_SUFFIX!$APP_MAN_SUFFIX$ac_delim
-LIB_MAN_SUFFIX!$LIB_MAN_SUFFIX$ac_delim
-FILE_MAN_SUFFIX!$FILE_MAN_SUFFIX$ac_delim
-MISC_MAN_SUFFIX!$MISC_MAN_SUFFIX$ac_delim
-DRIVER_MAN_SUFFIX!$DRIVER_MAN_SUFFIX$ac_delim
-ADMIN_MAN_SUFFIX!$ADMIN_MAN_SUFFIX$ac_delim
-APP_MAN_DIR!$APP_MAN_DIR$ac_delim
-LIB_MAN_DIR!$LIB_MAN_DIR$ac_delim
-FILE_MAN_DIR!$FILE_MAN_DIR$ac_delim
-MISC_MAN_DIR!$MISC_MAN_DIR$ac_delim
-DRIVER_MAN_DIR!$DRIVER_MAN_DIR$ac_delim
-ADMIN_MAN_DIR!$ADMIN_MAN_DIR$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 36; then
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
    { (exit 1); exit 1; }; }
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
 done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
 
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACAWK
 _ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
 _ACEOF
 
-
 # VPATH may cause trouble with some makes, so we remove $(srcdir),
 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
@@ -21130,19 +13356,133 @@ s/^[^=]*=[	 ]*$//
 }'
 fi
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_FILES"
 
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
 
-for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_t"; then
+    break
+  elif $ac_last_try; then
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
+$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
+   { (exit 1); exit 1; }; }
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
 do
   case $ac_tag in
   :[FHLC]) ac_mode=$ac_tag; continue;;
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
    { (exit 1); exit 1; }; };;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
@@ -21171,26 +13511,38 @@ echo "$as_me: error: Invalid tag $ac_tag." >&2;}
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
    { (exit 1); exit 1; }; };;
       esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
     done
 
     # Let's still pretend it is `configure' which instantiates (i.e., don't
     # use $as_me), people would be surprised to read:
     #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
     if test x"$ac_file" != x-; then
       configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
     fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
     esac
     ;;
   esac
@@ -21200,7 +13552,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
 	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
+$as_echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21226,7 +13578,7 @@ echo X"$ac_file" |
     as_dirs=
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
       as_dirs="'$as_qdir' $as_dirs"
@@ -21235,7 +13587,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
 	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21256,17 +13608,17 @@ echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
   ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -21311,12 +13663,13 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
   esac
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # If the template does not know about datarootdir, expand it.
 # FIXME: This hack should be removed a few years after 2.60.
 ac_datarootdir_hack=; ac_datarootdir_seen=
 
-case `sed -n '/datarootdir/ {
+ac_sed_dataroot='
+/datarootdir/ {
   p
   q
 }
@@ -21325,13 +13678,14 @@ case `sed -n '/datarootdir/ {
 /@infodir@/p
 /@localedir@/p
 /@mandir@/p
-' $ac_file_inputs` in
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 *datarootdir*) ac_datarootdir_seen=yes;;
 *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
   ac_datarootdir_hack='
   s&@datadir@&$datadir&g
   s&@docdir@&$docdir&g
@@ -21345,15 +13699,16 @@ _ACEOF
 # Neutralize VPATH when `$srcdir' = `.'.
 # Shell code in configure.ac might set extrasub.
 # FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
+s|@configure_input@|$ac_sed_conf_input|;t t
 s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
 s&@srcdir@&$ac_srcdir&;t t
 s&@abs_srcdir@&$ac_abs_srcdir&;t t
 s&@top_srcdir@&$ac_top_srcdir&;t t
@@ -21364,135 +13719,75 @@ s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 s&@INSTALL@&$ac_INSTALL&;t t
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&2;}
 
   rm -f "$tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-  esac
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
  ;;
   :H)
   #
   # CONFIG_HEADER
   #
-_ACEOF
-
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status.  If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless.  But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([	 #]*\\)[^	 ]*\\([	 ]*'
-ac_dB='\\)[	 (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
-
-uniq confdefs.h |
-  sed -n '
-	t rset
-	:rset
-	s/^[	 ]*#[	 ]*define[	 ][	 ]*//
-	t ok
-	d
-	:ok
-	s/[\\&,]/\\&/g
-	s/^\('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
-	s/^\('"$ac_word_re"'\)[	 ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
-  ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[	 #]*u.*,/* & */,' >>conftest.defines
-
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is:	 sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is:	 sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be:	 sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
-do
-  # Write a here document:
-    cat >>$CONFIG_STATUS <<_ACEOF
-    # First, check the format of the line:
-    cat >"\$tmp/defines.sed" <<\\CEOF
-/^[	 ]*#[	 ]*undef[	 ][	 ]*$ac_word_re[	 ]*\$/b def
-/^[	 ]*#[	 ]*define[	 ][	 ]*$ac_word_re[(	 ]/b def
-b
-:def
-_ACEOF
-  sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-    sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
-  ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
-  sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
-  grep . conftest.tail >/dev/null || break
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines conftest.tail
-
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
-cat >>$CONFIG_STATUS <<\_ACEOF
   if test x"$ac_file" != x-; then
-    echo "/* $configure_input  */" >"$tmp/config.h"
-    cat "$ac_result" >>"$tmp/config.h"
-    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+    } >"$tmp/config.h" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
-      rm -f $ac_file
-      mv "$tmp/config.h" $ac_file
+      rm -f "$ac_file"
+      mv "$tmp/config.h" "$ac_file" \
+	|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
     fi
   else
-    echo "/* $configure_input  */"
-    cat "$ac_result"
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
+$as_echo "$as_me: error: could not create -" >&2;}
+   { (exit 1); exit 1; }; }
   fi
-  rm -f "$tmp/out12"
-# Compute $ac_file's index in $config_headers.
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $ac_file | $ac_file:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X$ac_file : 'X\(//\)[^/]' \| \
-	 X$ac_file : 'X\(//\)$' \| \
-	 X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
-echo X$ac_file |
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21512,30 +13807,40 @@ echo X$ac_file |
 	  s/.*/./; q'`/stamp-h$_am_stamp_count
  ;;
 
-  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
+  :C)  { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
  ;;
   esac
 
 
   case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
-    dirpart=`$as_dirname -- "$mf" ||
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
 	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$mf" |
+$as_echo X"$mf" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21553,33 +13858,33 @@ echo X"$mf" |
 	    q
 	  }
 	  s/.*/./; q'`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`$as_dirname -- "$file" ||
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
 	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$file" |
+$as_echo X"$file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21597,7 +13902,7 @@ echo X"$file" |
 	    q
 	  }
 	  s/.*/./; q'`
-    { as_dir=$dirpart/$fdir
+      { as_dir=$dirpart/$fdir
   case $as_dir in #(
   -*) as_dir=./$as_dir;;
   esac
@@ -21605,7 +13910,7 @@ echo X"$file" |
     as_dirs=
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
       as_dirs="'$as_qdir' $as_dirs"
@@ -21614,7 +13919,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
 	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21635,13 +13940,655 @@ echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
   done
-done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Assembler program.
+AS=$AS
+
+# DLL creation program.
+DLLTOOL=$DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$OBJDUMP
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking.  This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $* ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
+
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[^=]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$@"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1+=\$2"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1=\$$1\$2"
+}
+
+_LT_EOF
+    ;;
+  esac
+
+
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
  ;;
 
   esac
@@ -21653,6 +14600,11 @@ _ACEOF
 chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -21674,4 +14626,8 @@ if test "$no_create" != yes; then
   # would make configure fail if this is the last instruction.
   $ac_cs_success || { (exit 1); exit 1; }
 fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
 
diff --git a/libXau/configure.ac b/libXau/configure.ac
index 9e1b2a50a..c63adcbee 100644
--- a/libXau/configure.ac
+++ b/libXau/configure.ac
@@ -24,15 +24,15 @@ dnl
 dnl Process this file with autoconf to create configure.
 
 AC_PREREQ([2.57])
-AC_INIT(libXau, 1.0.4, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],libXau)
+AC_INIT(libXau, 1.0.5, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],libXau)
 AM_INIT_AUTOMAKE([dist-bzip2])
 AM_MAINTAINER_MODE
 
 AM_CONFIG_HEADER(config.h)
 
-# Require xorg-macros version 1.1.0 or newer for XORG_WITH_LINT macro
-m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
-XORG_MACROS_VERSION(1.1)
+# Require xorg-macros: XORG_CWARNFLAGS, XORG_CHANGELOG, XORG_WITH_LINT
+m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.2 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.2)
 
 AC_PROG_CC
 AC_PROG_INSTALL
@@ -40,14 +40,13 @@ AC_PROG_LN_S
 AC_LIBTOOL_WIN32_DLL
 AM_PROG_LIBTOOL
 AC_PROG_MAKE_SET
+XORG_CWARNFLAGS
 
 PKG_CHECK_MODULES(XAU, xproto)
+XAU_CFLAGS="$CWARNFLAGS $XAU_CFLAGS"
 AC_SUBST(XAU_CFLAGS)
 AC_SUBST(XAU_LIBS)
 
-kerberos=false
-AM_CONDITIONAL(KERBEROS, test x$kerberos = xtrue)
-
 AC_ARG_ENABLE(xthreads,
               AC_HELP_STRING([--disable-xthreads],
                 [Disable libXau support for Multithreading]),
@@ -77,15 +76,9 @@ XORG_WITH_LINT
 XORG_LINT_LIBRARY([Xau])
 LINT_FLAGS="${LINT_FLAGS} ${XAU_CFLAGS}"
 
-if test "x$GCC" = "xyes"; then
-	GCC_WARNINGS="-Wall -Wpointer-arith -Wstrict-prototypes \
-	-Wmissing-prototypes -Wmissing-declarations \
-	-Wnested-externs -fno-strict-aliasing"
-	XAU_CFLAGS="$GCC_WARNINGS $XAU_CFLAGS"
-fi
-
 XORG_MANPAGE_SECTIONS
 XORG_RELEASE_VERSION
+XORG_CHANGELOG
 
 AC_OUTPUT([Makefile
            xau.pc])
diff --git a/libXau/depcomp b/libXau/depcomp
index ca5ea4e1e..e5f9736c7 100644
--- a/libXau/depcomp
+++ b/libXau/depcomp
@@ -1,9 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2006-10-15.18
+scriptversion=2007-03-29.01
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
 # Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
@@ -215,34 +215,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
diff --git a/libXau/include/X11/Xauth.h b/libXau/include/X11/Xauth.h
index 181618ac2..ace975d84 100644
--- a/libXau/include/X11/Xauth.h
+++ b/libXau/include/X11/Xauth.h
@@ -128,23 +128,6 @@ void XauDisposeAuth(
 Xauth*		/* auth */
 );
 
-#ifdef K5AUTH
-#include <krb5/krb5.h>
-/* 9/93: krb5.h leaks some symbols */
-#undef BITS32
-#undef xfree
-
-int XauKrb5Encode(
-     krb5_principal	/* princ */,
-     krb5_data *	/* outbuf */
-);
-
-int XauKrb5Decode(
-     krb5_data		/* inbuf */,
-     krb5_principal *	/* princ */
-);
-#endif /* K5AUTH */
-
 _XFUNCPROTOEND
 
 /* Return values from XauLockAuth */
diff --git a/libXau/install-sh b/libXau/install-sh
index 4fbbae7b7..a5897de6e 100644
--- a/libXau/install-sh
+++ b/libXau/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2006-10-14.15
+scriptversion=2006-12-25.00
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -48,7 +48,7 @@ IFS=" ""	$nl"
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
 if test -z "$doit"; then
   doit_exec=exec
 else
@@ -58,34 +58,49 @@ fi
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
 
-posix_glob=
 posix_mkdir=
 
 # Desired mode of installed file.
 mode=0755
 
+chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
-chgrpcmd=
-stripcmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -95,65 +110,55 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
 while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
+
+    -C) copy_on_change=true;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-        shift
-        shift
 	case $mode in
 	  *' '* | *'	'* | *'
 '*	  | *'*'* | *'?'* | *'['*)
 	    echo "$0: invalid mode: $mode" >&2
 	    exit 1;;
 	esac
-        continue;;
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
@@ -165,21 +170,22 @@ while test $# -ne 0; do
 
     *)  break;;
   esac
+  shift
 done
 
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
   # Otherwise, the last argument is the destination.  Remove it from $@.
   for arg
   do
-    if test -n "$dstarg"; then
+    if test -n "$dst_arg"; then
       # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
+      set fnord "$@" "$dst_arg"
       shift # fnord
     fi
     shift # arg
-    dstarg=$arg
+    dst_arg=$arg
   done
 fi
 
@@ -224,7 +230,7 @@ for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -242,22 +248,22 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
       dstdir=$dst
@@ -378,26 +384,19 @@ do
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
       esac
 
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
+      eval "$initialize_posix_glob"
 
       oIFS=$IFS
       IFS=/
-      $posix_glob && set -f
+      $posix_glob set -f
       set fnord $dstdir
       shift
-      $posix_glob && set +f
+      $posix_glob set +f
       IFS=$oIFS
 
       prefixes=
@@ -459,41 +458,54 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
 
     trap '' 0
   fi
diff --git a/libXau/ltmain.sh b/libXau/ltmain.sh
index 06823e057..6939dcc4a 100644
--- a/libXau/ltmain.sh
+++ b/libXau/ltmain.sh
@@ -1,30 +1,174 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
+# Generated from ltmain.m4sh.
+
+# ltmain.sh (GNU libtool) 2.2.6
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
 # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
 #
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+#     --config             show all configuration variables
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
+#
+# MODE must be one of the following:
+#
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#       host-triplet:	$host
+#       shell:		$SHELL
+#       compiler:		$LTCC
+#       compiler flags:		$LTCFLAGS
+#       linker:		$LD (gnu? $with_gnu_ld)
+#       $progname:		(GNU libtool) 2.2.6
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=2.2.6
+TIMESTAMP=""
+package_revision=1.3012
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+
+$lt_unset CDPATH
+
+
 
-basename="s,^.*/,,g"
+
+
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/bin/sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# Generated shell functions inserted here.
 
 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 # is ksh but when the shell is invoked as "sh" and the current value of
@@ -34,36 +178,396 @@ basename="s,^.*/,,g"
 progpath="$0"
 
 # The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
 
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=:
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
 
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.22
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname${mode+: }$mode: $*"
+}
 
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
-  setopt NO_GLOB_SUBST
-fi
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
-# Check that we have a working $echo.
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "X$my_tmpdir" | $Xsed
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "X$1" | $Xsed \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $SED -n '/^# Usage:/,/# -h/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    $ECHO
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+	p
+     }' < "$progpath"
+    exit $?
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    func_error "missing argument for $1"
+    exit_cmd=exit
+}
+
+exit_cmd=:
+
+
+
+
+
+# Check that we have a working $ECHO.
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+  # Yippee, $ECHO works!
   :
 else
-  # Restart under the correct shell, and then maybe $echo will work.
+  # Restart under the correct shell, and then maybe $ECHO will work.
   exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 fi
 
@@ -76,145 +580,424 @@ EOF
   exit $EXIT_SUCCESS
 fi
 
-default_mode=
-help="Try \`$progname --help' for more information."
 magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  SP2NL='tr \040 \012'
-  NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  SP2NL='tr \100 \n'
-  NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  $echo "$modename: not configured to build any kind of library" 1>&2
-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
-fi
+magic_exe="%%%MAGIC EXE variable%%%"
 
 # Global variables.
-mode=$default_mode
+# $mode is unset
 nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
 execute_dlfiles=
-duplicate_deps=no
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
 
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
 
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
 {
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
 
-    if test "$run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
 
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
 
-      if test ! -d "$my_tmpdir"; then
-	# Failing that, at least try and use $RANDOM to avoid a race
-	my_tmpdir="${my_template}-${RANDOM-0}$$"
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
 
-	save_mktempdir_umask=`umask`
-	umask 0077
-	$mkdir "$my_tmpdir"
-	umask $save_mktempdir_umask
-      fi
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
 
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || {
-        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
-	exit $EXIT_FAILURE
-      }
+    exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    $ECHO "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      $ECHO "enable shared libraries"
+    else
+      $ECHO "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      $ECHO "enable static libraries"
+    else
+      $ECHO "disable static libraries"
     fi
 
-    $echo "X$my_tmpdir" | $Xsed
+    exit $?
 }
 
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
 
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
+
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# Parse options once, thoroughly.  This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
 {
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
+
+  # Shorthand for --mode=foo, only valid as the first argument
+  case $1 in
+  clean|clea|cle|cl)
+    shift; set dummy --mode clean ${1+"$@"}; shift
     ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 | \
-	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
+  compile|compil|compi|comp|com|co|c)
+    shift; set dummy --mode compile ${1+"$@"}; shift
     ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
+  execute|execut|execu|exec|exe|ex|e)
+    shift; set dummy --mode execute ${1+"$@"}; shift
     ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
+  finish|finis|fini|fin|fi|f)
+    shift; set dummy --mode finish ${1+"$@"}; shift
+    ;;
+  install|instal|insta|inst|ins|in|i)
+    shift; set dummy --mode install ${1+"$@"}; shift
+    ;;
+  link|lin|li|l)
+    shift; set dummy --mode link ${1+"$@"}; shift
     ;;
+  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+    shift; set dummy --mode uninstall ${1+"$@"}; shift
+    ;;
+  esac
+
+  # Parse non-mode specific arguments:
+  while test "$#" -gt 0; do
+    opt="$1"
+    shift
+
+    case $opt in
+      --config)		func_config					;;
+
+      --debug)		preserve_args="$preserve_args $opt"
+			func_echo "enabling shell trace mode"
+			opt_debug='set -x'
+			$opt_debug
+			;;
+
+      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			execute_dlfiles="$execute_dlfiles $1"
+			shift
+			;;
+
+      --dry-run | -n)	opt_dry_run=:					;;
+      --features)       func_features					;;
+      --finish)		mode="finish"					;;
+
+      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			case $1 in
+			  # Valid mode arguments:
+			  clean)	;;
+			  compile)	;;
+			  execute)	;;
+			  finish)	;;
+			  install)	;;
+			  link)		;;
+			  relink)	;;
+			  uninstall)	;;
+
+			  # Catch anything else as an error
+			  *) func_error "invalid argument for $opt"
+			     exit_cmd=exit
+			     break
+			     ;;
+		        esac
+
+			mode="$1"
+			shift
+			;;
+
+      --preserve-dup-deps)
+			opt_duplicate_deps=:				;;
+
+      --quiet|--silent)	preserve_args="$preserve_args $opt"
+			opt_silent=:
+			;;
+
+      --verbose| -v)	preserve_args="$preserve_args $opt"
+			opt_silent=false
+			;;
+
+      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			preserve_args="$preserve_args $opt $1"
+			func_enable_tag "$1"	# tagname is set here
+			shift
+			;;
+
+      # Separate optargs to long options:
+      -dlopen=*|--mode=*|--tag=*)
+			func_opt_split "$opt"
+			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+			shift
+			;;
+
+      -\?|-h)		func_usage					;;
+      --help)		opt_help=:					;;
+      --version)	func_version					;;
+
+      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
+
+      *)		nonopt="$opt"
+			break
+			;;
+    esac
+  done
+
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+      ;;
   esac
-  $echo $win32_libid_type
+
+  # Having warned about all mis-specified options, bail out if
+  # anything was wrong.
+  $exit_cmd $EXIT_FAILURE
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+$opt_help || {
+  # Sanity checks first:
+  func_check_version_match
+
+  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+    func_fatal_configuration "not configured to build any kind of library"
+  fi
+
+  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+
+
+  # Darwin sucks
+  eval std_shrext=\"$shrext_cmds\"
+
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    func_error "unrecognized option \`-dlopen'"
+    $ECHO "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$progname --help --mode=$mode' for more information."
+}
+
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_ltwrapper_scriptname_result=""
+    if func_ltwrapper_executable_p "$1"; then
+	func_dirname_and_basename "$1" "" "."
+	func_stripname '' '.exe' "$func_basename_result"
+	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    fi
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
 }
 
 
@@ -226,39 +1009,32 @@ func_win32_libid ()
 # arg is usually of the form 'gcc ...'
 func_infer_tag ()
 {
+    $opt_debug
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
+        func_quote_for_eval "$arg"
+	CC_quoted="$CC_quoted $func_quote_for_eval_result"
       done
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
 	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 	    # Evaluate the configuration.
 	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 	    CC_quoted=
 	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
+	      # Double-quote args containing other shell metacharacters.
+	      func_quote_for_eval "$arg"
+	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	    done
 	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
@@ -272,11 +1048,10 @@ func_infer_tag ()
 	# was found and let the user know that the "--tag" command
 	# line option must be used.
 	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
 	fi
 	;;
       esac
@@ -284,343 +1059,48 @@ func_infer_tag ()
 }
 
 
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-
-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
-      exit $EXIT_FAILURE
-    fi
-}
 
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
 {
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-    my_status=""
-
-    $show "${rm}r $my_gentop"
-    $run ${rm}r "$my_gentop"
-    $show "$mkdir $my_gentop"
-    $run $mkdir "$my_gentop"
-    my_status=$?
-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-      exit $my_status
-    fi
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xdir="$my_gentop/$my_xlib"
-
-      $show "${rm}r $my_xdir"
-      $run ${rm}r "$my_xdir"
-      $show "$mkdir $my_xdir"
-      $run $mkdir "$my_xdir"
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
-	exit $exit_status
-      fi
-      case $host in
-      *-darwin*)
-	$show "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	if test -z "$run"; then
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-	  if test -n "$darwin_arches"; then 
-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    ${rm}r unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd "$darwin_orig_dir"
- 	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	fi # $run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-    func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
-  shift
-
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-      preserve_args="${preserve_args}=$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit $EXIT_FAILURE
-	;;
-      esac
-
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-	else
-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    $echo
-    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
-    $echo "This is free software; see the source for copying conditions.  There is NO"
-    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $?
-    ;;
-
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
-    done
-    exit $?
-    ;;
-
-  --debug)
-    $echo "$progname: enabling shell trace mode"
-    set -x
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    $echo "host: $host"
+    write_libobj=${1}
     if test "$build_libtool_libs" = yes; then
-      $echo "enable shared libraries"
+      write_lobj=\'${2}\'
     else
-      $echo "disable shared libraries"
+      write_lobj=none
     fi
+
     if test "$build_old_libs" = yes; then
-      $echo "enable static libraries"
+      write_oldobj=\'${3}\'
     else
-      $echo "disable static libraries"
+      write_oldobj=none
     fi
-    exit $?
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --preserve-dup-deps) duplicate_deps="yes" ;;
-
-  --quiet | --silent)
-    show=:
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --tag)
-    prevopt="--tag"
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
 
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no) 
-  ;;
-shared)
-  build_libtool_libs=no
-  build_old_libs=yes
-  ;;
-static)
-  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-  ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-    case $nonopt in
-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
 
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
+# Name of the PIC object.
+pic_object=$write_lobj
 
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
 
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
 
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
     # Get the compilation command and the source file.
     base_compile=
     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
@@ -629,6 +1109,7 @@ if test -z "$show_help"; then
     arg_mode=normal
     libobj=
     later=
+    pie_flag=
 
     for arg
     do
@@ -649,15 +1130,18 @@ if test -z "$show_help"; then
 	# Accept any command-line options.
 	case $arg in
 	-o)
-	  if test -n "$libobj" ; then
-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
 	  arg_mode=target
 	  continue
 	  ;;
 
-	-static | -prefer-pic | -prefer-non-pic)
+	-pie | -fpie | -fPIE)
+          pie_flag="$pie_flag $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
 	  later="$later $arg"
 	  continue
 	  ;;
@@ -673,31 +1157,25 @@ if test -z "$show_help"; then
 	  ;;            #  replaced later.  I would guess that would be a bug.
 
 	-Wc,*)
-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
 	  lastarg=
 	  save_ifs="$IFS"; IFS=','
- 	  for arg in $args; do
+	  for arg in $args; do
 	    IFS="$save_ifs"
-
-	    # Double-quote args containing other shell metacharacters.
-	    # Many Bourne shells cannot handle close brackets correctly
-	    # in scan sets, so we specify it separately.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    lastarg="$lastarg $arg"
+	    func_quote_for_eval "$arg"
+	    lastarg="$lastarg $func_quote_for_eval_result"
 	  done
 	  IFS="$save_ifs"
-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
 
 	  # Add the arguments to base_compile.
 	  base_compile="$base_compile $lastarg"
 	  continue
 	  ;;
 
-	* )
+	*)
 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
@@ -709,64 +1187,42 @@ if test -z "$show_help"; then
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      case $lastarg in
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
-      # in scan sets (worked around with variable expansion),
-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
-      # at all, so we specify them separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      base_compile="$base_compile $lastarg"
+      func_quote_for_eval "$lastarg"
+      base_compile="$base_compile $func_quote_for_eval_result"
     done # for arg
 
     case $arg_mode in
     arg)
-      $echo "$modename: you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
+      func_fatal_error "you must specify an argument for -Xcompile"
       ;;
     target)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_error "you must specify a target with \`-o'"
       ;;
     *)
       # Get the name of the library object.
-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
       ;;
     esac
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
     case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
     esac
 
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
     case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
       ;;
     esac
 
@@ -774,7 +1230,15 @@ if test -z "$show_help"; then
 
     for arg in $later; do
       case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
       -static)
+	build_libtool_libs=no
 	build_old_libs=yes
 	continue
 	;;
@@ -791,28 +1255,17 @@ if test -z "$show_help"; then
       esac
     done
 
-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-    case $qlibobj in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qlibobj="\"$qlibobj\"" ;;
-    esac
-    test "X$libobj" != "X$qlibobj" \
-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
     lobj=${xdir}$objdir/$objname
 
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
 
     # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then
@@ -821,12 +1274,9 @@ if test -z "$show_help"; then
       removelist="$lobj $libobj ${libobj}T"
     fi
 
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
       pic_mode=default
       ;;
     esac
@@ -838,10 +1288,8 @@ if test -z "$show_help"; then
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
     else
       output_obj=
       need_locks=no
@@ -851,13 +1299,13 @@ if test -z "$show_help"; then
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
     elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`
 
@@ -868,34 +1316,22 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
-      $echo "$srcfile" > "$lockfile"
+      removelist="$removelist $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
     fi
 
+    $opt_dry_run || $RM $removelist
+    removelist="$removelist $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-    case $qsrcfile in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      qsrcfile="\"$qsrcfile\"" ;;
-    esac
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
 
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
@@ -909,32 +1345,19 @@ EOF
 	command="$base_compile $qsrcfile"
       fi
 
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	exit_status=$?
-	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $exit_status
-	fi
-      fi
+      func_mkdir_p "$xdir$objdir"
 
       if test -z "$output_obj"; then
 	# Place PIC objects in $objdir
 	command="$command -o $lobj"
       fi
 
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -948,45 +1371,27 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
       fi
 
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
       # Allow error messages only from the first compilation.
       if test "$suppress_opt" = yes; then
-        suppress_output=' >/dev/null 2>&1'
+	suppress_output=' >/dev/null 2>&1'
       fi
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
     fi
 
     # Only build a position-dependent object if we build old libraries.
     if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then
 	# Don't build PIC code
-	command="$base_compile $qsrcfile"
+	command="$base_compile $qsrcfile$pie_flag"
       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
@@ -996,17 +1401,12 @@ EOF
 
       # Suppress compiler output if we already did a PIC compilation.
       command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -1020,53 +1420,2620 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$mode'"
+        ;;
+    esac
+
+    $ECHO
+    $ECHO "Try \`$progname --help' for more information about other modes."
+
+    exit $?
+}
+
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
 	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
 	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
       fi
+    done
 
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
 
-EOF
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_quote_for_eval "$file"
+      args="$args $func_quote_for_eval_result"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
     else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	$ECHO "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
 
-EOF
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
     fi
 
-    $run $mv "${libobj}T" "${libobj}"
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    $ECHO "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $ECHO "   $libdir"
+    done
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $ECHO "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
 
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
+      $ECHO "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $ECHO "   - have your system administrator run these commands:$admincmds"
     fi
+    if test -f /etc/ld.so.conf; then
+      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $ECHO
 
+    $ECHO "See any operating system documentation about shared libraries for"
+    case $host in
+      solaris2.[6789]|solaris2.1[0-9])
+        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	$ECHO "pages."
+	;;
+      *)
+        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+        ;;
+    esac
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
+}
+
+test "$mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    install_prog="$install_prog$func_quote_for_eval_result"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      install_prog="$install_prog $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_verbose "extracting global C symbols from \`$progfile'"
+	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+	  $opt_dry_run || {
+	    eval '$ECHO ": $name " >> "$nlist"'
+	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	  }
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+"
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* )
+	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs.  */"
+	    lt_dlsym_const= ;;
+	  *osf5*)
+	    echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+	    lt_dlsym_const= ;;
+	  *)
+	    lt_dlsym_const=const ;;
+	  esac
+
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) symtab_cflags="$symtab_cflags $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
     ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+	func_emit_wrapper_part1_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part1_arg1=$1
+	fi
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$ECHO "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
+	fi
+
+	$ECHO "\
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2* | *-cegcc*)
+	  $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_arg1=$1
+	fi
+
+	# split this up so that func_emit_cwrapperexe_src
+	# can call each part independently.
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
     case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
+
+const char *program_name = NULL;
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+
+static const char *script_text_part1 =
+EOF
+
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+
+static const char *script_text_part2 =
+EOF
+	    func_emit_wrapper_part2 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+
+	    cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_pathlist "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_pathlist "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
+
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+
+  /* very simple arg parsing; don't want to rely on getopt */
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
+	  return 0;
+	}
+    }
+
+  newargz = XMALLOC (char *, argc + 1);
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+			  tmp_pathspec));
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+			  actual_cwrapper_path));
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  for (i = 0; i < newargc; i++)
+    {
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal ("getcwd failed");
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+			      tmp_pathspec));
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  char *errstr = strerror (errno);
+	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
@@ -1084,10 +4051,10 @@ EOF
       allow_undefined=yes
       ;;
     esac
-    libtool_args="$nonopt"
+    libtool_args=$nonopt
     base_compile="$nonopt $@"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
+    compile_command=$nonopt
+    finalize_command=$nonopt
 
     compile_rpath=
     finalize_rpath=
@@ -1102,6 +4069,7 @@ EOF
     dllsearchpath=
     lib_search_path=`pwd`
     inst_prefix_dir=
+    new_inherited_linker_flags=
 
     avoid_version=no
     dlfiles=
@@ -1117,7 +4085,6 @@ EOF
     no_install=no
     objs=
     non_pic_objects=
-    notinst_path= # paths that contain not-installed libtool libraries
     precious_files_regex=
     prefer_static_libs=no
     preload=no
@@ -1131,28 +4098,44 @@ EOF
     thread_safe=no
     vinfo=
     vinfo_number=no
-
+    weak_libs=
+    single_module="${wl}-single_module"
     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
     for arg
     do
       case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	    func_warning "complete static linking is impossible in this configuration"
 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes
-	else
+	  ;;
+	-static)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=built
-	fi
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
 	build_libtool_libs=no
 	build_old_libs=yes
 	break
@@ -1167,20 +4150,16 @@ EOF
     while test "$#" -gt 0; do
       arg="$1"
       shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
 
       # If the previous option needs an argument, assign it.
       if test -n "$prev"; then
 	case $prev in
 	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
 	  ;;
 	esac
 
@@ -1188,8 +4167,8 @@ EOF
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
 	    preload=yes
 	  fi
 	  case $arg in
@@ -1227,10 +4206,8 @@ EOF
 	  ;;
 	expsyms)
 	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
 	  prev=
 	  continue
 	  ;;
@@ -1239,18 +4216,21 @@ EOF
 	  prev=
 	  continue
 	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
 	  prev=
 	  continue
 	  ;;
-	release)
-	  release="-$arg"
+	inst_prefix)
+	  inst_prefix_dir="$arg"
 	  prev=
 	  continue
 	  ;;
@@ -1258,39 +4238,30 @@ EOF
 	  if test -f "$arg"; then
 	    save_arg=$arg
 	    moreargs=
-	    for fil in `cat $save_arg`
+	    for fil in `cat "$save_arg"`
 	    do
 #	      moreargs="$moreargs $fil"
 	      arg=$fil
 	      # A libtool-controlled object.
 
 	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	      if func_lalib_unsafe_p "$arg"; then
 		pic_object=
 		non_pic_object=
 
 		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
+		func_source "$arg"
 
-		if test -z "$pic_object" || \
+		if test -z "$pic_object" ||
 		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
+		   test "$pic_object" = none &&
 		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
+		  func_fatal_error "cannot find name of object for \`$arg'"
 		fi
 
 		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
 
 		if test "$pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
@@ -1315,7 +4286,7 @@ EOF
 		  fi
 
 		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
+		  func_append libobjs " $pic_object"
 		  arg="$pic_object"
 		fi
 
@@ -1325,7 +4296,7 @@ EOF
 		  non_pic_object="$xdir$non_pic_object"
 
 		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_append non_pic_objects " $non_pic_object"
 		  if test -z "$pic_object" || test "$pic_object" = none ; then
 		    arg="$non_pic_object"
 		  fi
@@ -1333,46 +4304,48 @@ EOF
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
 		  non_pic_object="$pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_append non_pic_objects " $non_pic_object"
 		fi
 	      else
 		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
-		else
-		  # Dry-run case.
-
+		if $opt_dry_run; then
 		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
 		fi
 	      fi
 	    done
 	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
+	    func_fatal_error "link input file \`$arg' does not exist"
 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
 	rpath | xrpath)
 	  # We need an absolute path.
 	  case $arg in
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "only absolute run-paths are allowed"
 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
@@ -1389,39 +4362,37 @@ EOF
 	  prev=
 	  continue
 	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
+	shrext)
+	  shrext_cmds="$arg"
 	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
 	  continue
 	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
+	weak)
+	  weak_libs="$weak_libs $arg"
 	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
 	  continue
 	  ;;
 	xcclinker)
 	  linker_flags="$linker_flags $qarg"
 	  compiler_flags="$compiler_flags $qarg"
 	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
-	shrext)
-  	  shrext_cmds="$arg"
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
 	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
-	darwin_framework|darwin_framework_skip)
-	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
 	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
 	  continue
 	  ;;
 	*)
@@ -1437,16 +4408,16 @@ EOF
       case $arg in
       -all-static)
 	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
 	fi
 	continue
 	;;
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
 	;;
 
       -avoid-version)
@@ -1471,8 +4442,7 @@ EOF
 
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
@@ -1482,15 +4452,8 @@ EOF
 	continue
 	;;
 
-      -framework|-arch|-isysroot)
-	case " $CC " in
-	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
-		prev=darwin_framework_skip ;;
-	  *) compiler_flags="$compiler_flags $arg"
-	     prev=darwin_framework ;;
-	esac
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
+      -framework)
+	prev=framework
 	continue
 	;;
 
@@ -1504,25 +4467,30 @@ EOF
       -L[A-Z][A-Z]*:*)
 	case $with_gcc/$host in
 	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
 	  ;;
 	esac
 	continue
 	;;
 
       -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	func_stripname '-L' '' "$arg"
+	dir=$func_stripname_result
+	if test -z "$dir"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    absdir="$dir"
-	    notinst_path="$notinst_path $dir"
-	  fi
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
 	  dir="$absdir"
 	  ;;
 	esac
@@ -1534,14 +4502,16 @@ EOF
 	  ;;
 	esac
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -1552,7 +4522,7 @@ EOF
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -1566,7 +4536,7 @@ EOF
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
+	    deplibs="$deplibs System.ltframework"
 	    continue
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
@@ -1590,57 +4560,35 @@ EOF
 	continue
 	;;
 
+      -module)
+	module=yes
+	continue
+	;;
+
       # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.
-      -model)
-	compile_command="$compile_command $arg"
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot)
 	compiler_flags="$compiler_flags $arg"
-	finalize_command="$finalize_command $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
 	prev=xcompiler
 	continue
 	;;
 
-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
 	compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+	esac
 	continue
 	;;
 
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m* pass through architecture-specific compiler args for GCC
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -pg pass through profiling flag for GCC
-      # @file GCC response files
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
-      -t[45]*|-txscale*|@*)
-
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-        compile_command="$compile_command $arg"
-        finalize_command="$finalize_command $arg"
-        compiler_flags="$compiler_flags $arg"
-        continue
-        ;;
-
-      -shrext)
-	prev=shrext
+      -multi_module)
+	single_module="${wl}-multi_module"
 	continue
 	;;
 
@@ -1651,11 +4599,11 @@ EOF
 
       -no-install)
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
@@ -1696,13 +4644,13 @@ EOF
 	;;
 
       -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "only absolute run-paths are allowed"
 	  ;;
 	esac
 	case "$xrpath " in
@@ -1712,7 +4660,17 @@ EOF
 	continue
 	;;
 
-      -static)
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
@@ -1730,47 +4688,49 @@ EOF
 	prev=vinfo
 	continue
 	;;
+
       -version-number)
 	prev=vinfo
 	vinfo_number=yes
 	continue
 	;;
 
+      -weak)
+        prev=weak
+	continue
+	;;
+
       -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
+          func_quote_for_eval "$flag"
+	  arg="$arg $wl$func_quote_for_eval_result"
+	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
 	;;
 
       -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
+          func_quote_for_eval "$flag"
+	  arg="$arg $wl$func_quote_for_eval_result"
+	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+	  linker_flags="$linker_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
 	;;
 
       -Xcompiler)
@@ -1788,16 +4748,36 @@ EOF
 	continue
 	;;
 
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
       # Some other compiler flag.
       -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
 	;;
 
       *.$objext)
@@ -1809,32 +4789,23 @@ EOF
 	# A libtool-controlled object.
 
 	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_unsafe_p "$arg"; then
 	  pic_object=
 	  non_pic_object=
 
 	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
+	  func_source "$arg"
 
-	  if test -z "$pic_object" || \
+	  if test -z "$pic_object" ||
 	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
+	     test "$pic_object" = none &&
 	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "cannot find name of object for \`$arg'"
 	  fi
 
 	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
 
 	  if test "$pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
@@ -1859,7 +4830,7 @@ EOF
 	    fi
 
 	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
+	    func_append libobjs " $pic_object"
 	    arg="$pic_object"
 	  fi
 
@@ -1869,7 +4840,7 @@ EOF
 	    non_pic_object="$xdir$non_pic_object"
 
 	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
@@ -1877,28 +4848,22 @@ EOF
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
 	    non_pic_object="$pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	  fi
 	else
 	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit $EXIT_FAILURE
-	  else
-	    # Dry-run case.
-
+	  if $opt_dry_run; then
 	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
 	  fi
 	fi
 	;;
@@ -1931,70 +4896,51 @@ EOF
       *)
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
 	;;
       esac # arg
 
       # Now actually substitute the argument into the commands.
       if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
       fi
     done # argument parsing loop
 
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
 
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
     fi
 
     oldlibs=
     # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    func_basename "$output"
+    outputname="$func_basename_result"
     libobjs_save="$libobjs"
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
     # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $exit_status
-      fi
-    fi
+    func_mkdir_p "$output_objdir"
 
     # Determine the type of output
     case $output in
     "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_help "you must specify an output file"
       ;;
     *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;
@@ -2002,22 +4948,13 @@ EOF
     *) linkmode=prog ;; # Anything else should be a program.
     esac
 
-    case $host in
-    *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplications in $postdeps and $predeps
-      duplicate_compiler_generated_deps=yes
-      ;;
-    *)
-      duplicate_compiler_generated_deps=$duplicate_deps
-      ;;
-    esac
     specialdeplibs=
 
     libs=
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
+      if $opt_duplicate_deps ; then
 	case "$libs " in
 	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	esac
@@ -2032,7 +4969,7 @@ EOF
       # $postdeps and mark them as special (i.e., whose duplicates are
       # not to be eliminated).
       pre_post_deps=
-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+      if $opt_duplicate_compiler_generated_deps; then
 	for pre_post_dep in $predeps $postdeps; do
 	  case "$pre_post_deps " in
 	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
@@ -2048,15 +4985,16 @@ EOF
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
     case $linkmode in
     lib)
-	passes="conv link"
+	passes="conv dlpreopen link"
 	for file in $dlfiles $dlprefiles; do
 	  case $file in
 	  *.la) ;;
 	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
 	    ;;
 	  esac
 	done
@@ -2072,7 +5010,20 @@ EOF
     *)  passes="conv"
 	;;
     esac
+
     for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
       if test "$linkmode,$pass" = "lib,link" ||
 	 test "$linkmode,$pass" = "prog,scan"; then
 	libs="$deplibs"
@@ -2085,31 +5036,65 @@ EOF
 	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  case $lib in
+	  *.la)	func_source "$lib" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) deplibs="$deplibs $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
       if test "$pass" = dlopen; then
 	# Collect dlpreopened libraries
 	save_deplibs="$deplibs"
 	deplibs=
       fi
+
       for deplib in $libs; do
 	lib=
 	found=no
 	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    compiler_flags="$compiler_flags $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
 	  fi
 	  continue
 	  ;;
 	-l*)
 	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    func_warning "\`-l' is ignored for archives/objects"
 	    continue
 	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
 	      lib="$searchdir/lib${name}${search_ext}"
@@ -2139,21 +5124,17 @@ EOF
 	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)
-		if (${SED} -e '2q' $lib |
-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		if func_lalib_p "$lib"; then
 		  library_names=
 		  old_library=
-		  case $lib in
-		  */* | *\\*) . $lib ;;
-		  *) . ./$lib ;;
-		  esac
+		  func_source "$lib"
 		  for l in $old_library $library_names; do
 		    ll="$l"
 		  done
 		  if test "X$ll" = "X$old_library" ; then # only static version available
 		    found=no
-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-		    test "X$ladir" = "X$lib" && ladir="."
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
 		    lib=$ladir/$old_library
 		    if test "$linkmode,$pass" = "prog,link"; then
 		      compile_deplibs="$deplib $compile_deplibs"
@@ -2165,19 +5146,35 @@ EOF
 		    continue
 		  fi
 		fi
-	        ;;
+		;;
 	      *) ;;
 	      esac
 	    fi
 	  fi
 	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
 	-L*)
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
 	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
 	    ;;
 	  prog)
 	    if test "$pass" = conv; then
@@ -2190,17 +5187,19 @@ EOF
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
 	    ;;
 	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    func_warning "\`-L' is ignored for archives/objects"
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
 	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    func_stripname '-R' '' "$deplib"
+	    dir=$func_stripname_result
 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
 	    *" $dir "*) ;;
@@ -2218,35 +5217,41 @@ EOF
 	  fi
 	  case $linkmode in
 	  lib)
-	    valid_a_lib=no
-	    case $deplibs_check_method in
-	      match_pattern*)
-		set dummy $deplibs_check_method
-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-		if eval $echo \"$deplib\" 2>/dev/null \
-		    | $SED 10q \
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		  valid_a_lib=yes
-		fi
+		    valid_a_lib=yes
+		  fi
 		;;
-	      pass_all)
-		valid_a_lib=yes
+		pass_all)
+		  valid_a_lib=yes
 		;;
-            esac
-	    if test "$valid_a_lib" != yes; then
-	      $echo
-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
-	      $echo "*** I have the capability to make that library automatically link in when"
-	      $echo "*** you link to this library.  But I can only do this if you have a"
-	      $echo "*** shared version of the library, which you do not appear to have"
-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
-	      $echo "*** that it is just a static archive that I should not used here."
-	    else
-	      $echo
-	      $echo "*** Warning: Linking the shared library $output against the"
-	      $echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		$ECHO
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
+		$ECHO "*** that it is just a static archive that I should not use here."
+	      else
+		$ECHO
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
 	    continue
 	    ;;
 	  prog)
@@ -2281,21 +5286,18 @@ EOF
 	  continue
 	  ;;
 	esac # case $deplib
+
 	if test "$found" = yes || test -f "$lib"; then :
 	else
-	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
 	fi
 
 	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
 
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
 
 	dlname=
 	dlopen=
@@ -2303,6 +5305,7 @@ EOF
 	libdir=
 	library_names=
 	old_library=
+	inherited_linker_flags=
 	# If the library was installed with an old release of libtool,
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
@@ -2311,11 +5314,19 @@ EOF
 
 
 	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
@@ -2328,26 +5339,24 @@ EOF
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit $EXIT_FAILURE
+	      func_fatal_error "cannot find name of link library for \`$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_duplicate_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
 	  continue
 	fi # $pass = conv
 
@@ -2358,15 +5367,13 @@ EOF
 	  linklib="$l"
 	done
 	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot find name of link library for \`$lib'"
 	fi
 
 	# This library was specified with -dlopen.
 	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
 	  fi
 	  if test -z "$dlname" ||
 	     test "$dlopen_support" != yes ||
@@ -2388,18 +5395,19 @@ EOF
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
 	    abs_ladir="$ladir"
 	  fi
 	  ;;
 	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	func_basename "$lib"
+	laname="$func_basename_result"
 
 	# Find the relevant object directory and library name.
 	if test "X$installed" = Xyes; then
 	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    func_warning "library \`$lib' was moved."
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    libdir="$abs_ladir"
@@ -2421,18 +5429,22 @@ EOF
 	    notinst_path="$notinst_path $abs_ladir"
 	  fi
 	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
 
 	# This library was specified with -dlpreopen.
 	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
 	  fi
 	  # Prefer using a static library (so that no silly _DYNAMIC symbols
 	  # are required to link).
 	  if test -n "$old_library"; then
 	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	    # Keep a list of preopened convenience libraries to check
+	    # that they are being used correctly in the link pass.
+	    test -z "$libdir" && \
+		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
 	  # Otherwise, use the dlname, so that lt_dlopen finds it.
 	  elif test -n "$dlname"; then
 	    newdlprefiles="$newdlprefiles $dir/$dlname"
@@ -2468,7 +5480,9 @@ EOF
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    -L*) func_stripname '-L' '' "$deplib"
+	         newlib_search_path="$newlib_search_path $func_stripname_result"
+		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
 	    if test "$linkalldeplibs" = yes; then
@@ -2478,7 +5492,7 @@ EOF
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
+	    if $opt_duplicate_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
@@ -2490,14 +5504,15 @@ EOF
 
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $absdir" ;;
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) temp_rpath="$temp_rpath$absdir:" ;;
 	      esac
 	    fi
 
@@ -2535,27 +5550,43 @@ EOF
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	if test "$use_static_libs" = built && test "$installed" = yes; then
 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
 	  # This is a shared library
 
-	  # Warn about portability, can't link against -module's on
-	  # some systems (darwin)
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
-	    $echo
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    $ECHO
 	    if test "$linkmode" = prog; then
-	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
-	    $echo "*** $linklib is not portable!"
+	    $ECHO "*** $linklib is not portable!"
 	  fi
 	  if test "$linkmode" = lib &&
 	     test "$hardcode_into_libs" = yes; then
@@ -2585,17 +5616,19 @@ EOF
 	  if test -n "$old_archive_from_expsyms_cmds"; then
 	    # figure out the soname
 	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
 	      soname="$dlname"
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw*)
-		major=`expr $current - $age`
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
 		versuffix="-$major"
 		;;
 	      esac
@@ -2606,36 +5639,22 @@ EOF
 
 	    # Make a new name for the extract_expsyms_cmds to use
 	    soroot="$soname"
-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$extract_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$old_archive_from_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
 	    fi
 	    # make sure the library variables are pointing to the new library
 	    dir=$output_objdir
@@ -2657,17 +5676,21 @@ EOF
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
 		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
-		    # it, someone is ignoring the new warnings I added
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
 		    if /usr/bin/file -L $add 2> /dev/null |
-                      $EGREP ": [^:]* bundle" >/dev/null ; then
-		      $echo "** Warning, lib $linklib is a module, not a shared library"
-		      if test -z "$old_library" ; then
-		        $echo
-		        $echo "** And there doesn't seem to be a static archive available"
-		        $echo "** The link will probably fail, sorry"
-		      else
-		        add="$dir/$old_library"
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  $ECHO
+			  $ECHO "*** And there doesn't seem to be a static archive available"
+			  $ECHO "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
 		      fi
 		    fi
 		esac
@@ -2685,7 +5708,8 @@ EOF
 	      fi
 	      ;;
 	    relink)
-	      if test "$hardcode_direct" = yes; then
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
 		add_dir="-L$dir"
@@ -2709,8 +5733,7 @@ EOF
 	    esac
 
 	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit $EXIT_FAILURE
+	      func_fatal_configuration "unsupported hardcode properties"
 	    fi
 
 	    if test -n "$add_shlibpath"; then
@@ -2725,8 +5748,8 @@ EOF
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
 		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
@@ -2741,7 +5764,8 @@ EOF
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
 	      add="$libdir/$linklib"
 	    elif test "$hardcode_minus_L" = yes; then
 	      add_dir="-L$libdir"
@@ -2755,9 +5779,9 @@ EOF
 	    elif test "$hardcode_automatic" = yes; then
 	      if test -n "$inst_prefix_dir" &&
 		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-	        add="$inst_prefix_dir$libdir/$linklib"
+		add="$inst_prefix_dir$libdir/$linklib"
 	      else
-	        add="$libdir/$linklib"
+		add="$libdir/$linklib"
 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
@@ -2801,21 +5825,21 @@ EOF
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    $echo
-	    $echo "*** Warning: This system can not link to static lib archive $lib."
-	    $echo "*** I have the capability to make that library automatically link in when"
-	    $echo "*** you link to this library.  But I can only do this if you have a"
-	    $echo "*** shared version of the library, which you do not appear to have."
+	    $ECHO
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    $ECHO "*** I have the capability to make that library automatically link in when"
+	    $ECHO "*** you link to this library.  But I can only do this if you have a"
+	    $ECHO "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      $echo "*** But as you try to build a module library, libtool will still create "
-	      $echo "*** a static module, that should work as long as the dlopening application"
-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      $ECHO "*** But as you try to build a module library, libtool will still create "
+	      $ECHO "*** a static module, that should work as long as the dlopening application"
+	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		$echo
-		$echo "*** However, this would only work if libtool was able to extract symbol"
-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$echo "*** not find such a program.  So, this module is probably useless."
-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		$ECHO
+		$ECHO "*** However, this would only work if libtool was able to extract symbol"
+		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$ECHO "*** not find such a program.  So, this module is probably useless."
+		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -2839,7 +5863,8 @@ EOF
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
 	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
 		   case " $xrpath " in
 		   *" $temp_xrpath "*) ;;
 		   *) xrpath="$xrpath $temp_xrpath";;
@@ -2857,7 +5882,7 @@ EOF
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
+	    if $opt_duplicate_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
@@ -2871,88 +5896,71 @@ EOF
 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
+	        func_dirname "$deplib" "" "."
+		dir="$func_dirname_result"
 		# We need an absolute path.
 		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    func_warning "cannot determine absolute directory name of \`$dir'"
 		    absdir="$dir"
 		  fi
 		  ;;
 		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="$absdir"
-		fi
-		depdepl=
+		if $GREP "^installed=no" $deplib > /dev/null; then
 		case $host in
 		*-*-darwin*)
-		  # we do not want to link against static libs,
-		  # but need to link against shared
+		  depdepl=
 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$path/$depdepl" ; then
-		      depdepl="$path/$depdepl"
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
 		    fi
-		    # do not add paths which are already there
-		    case " $newlib_search_path " in
-		    *" $path "*) ;;
-		    *) newlib_search_path="$newlib_search_path $path";;
-		    esac
 		  fi
-		  path=""
 		  ;;
 		*)
-		  path="-L$path"
+		  path="-L$absdir/$objdir"
 		  ;;
 		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
 		;;
-	      -l*)
-		case $host in
-		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
-		  ;;
-		*) continue ;;
-		esac
-		;;
-	      *) continue ;;
 	      esac
 	      case " $deplibs " in
 	      *" $path "*) ;;
 	      *) deplibs="$path $deplibs" ;;
 	      esac
-	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
 	    done
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
       dependency_libs="$newdependency_libs"
       if test "$pass" = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
@@ -3051,38 +6059,36 @@ EOF
     done # for pass
     if test "$linkmode" = prog; then
       dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
       dlprefiles="$newdlprefiles"
     fi
 
     case $linkmode in
     oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+	func_warning "\`-dlopen' is ignored for archives"
       fi
 
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
 
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
 
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
-      fi
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
 
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
@@ -3094,48 +6100,48 @@ EOF
       # Make sure we only generate libraries of the form `libNAME.la'.
       case $outputname in
       lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
 	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
       *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
 	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
 	fi
 	;;
       esac
 
       if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
-	  $echo
-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  $echo "*** objects $objs is not portable!"
+	  $ECHO
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
 	  libobjs="$libobjs $objs"
 	fi
       fi
 
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
 
       set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
 
       oldlibs=
       if test -z "$rpath"; then
@@ -3149,25 +6155,21 @@ EOF
 	  build_old_libs=yes
 	fi
 
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
-	fi
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
 
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
       else
 
 	# Parse the version information argument.
 	save_ifs="$IFS"; IFS=':'
 	set dummy $vinfo 0 0 0
+	shift
 	IFS="$save_ifs"
 
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
@@ -3175,9 +6177,9 @@ EOF
 
 	case $vinfo_number in
 	yes)
-	  number_major="$2"
-	  number_minor="$3"
-	  number_revision="$4"
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
@@ -3186,8 +6188,9 @@ EOF
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
-	  darwin|linux|osf|windows)
-	    current=`expr $number_major + $number_minor`
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
@@ -3197,16 +6200,18 @@ EOF
 	    age="0"
 	    ;;
 	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor - 1`
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_minor"
+	    lt_irix_increment=no
 	    ;;
 	  esac
 	  ;;
 	no)
-	  current="$2"
-	  revision="$3"
-	  age="$4"
+	  current="$1"
+	  revision="$2"
+	  age="$3"
 	  ;;
 	esac
 
@@ -3214,34 +6219,30 @@ EOF
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	fi
 
 	# Calculate the version variables.
@@ -3254,11 +6255,14 @@ EOF
 	darwin)
 	  # Like Linux, but with the current version available in
 	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
 	  ;;
 
 	freebsd-aout)
@@ -3268,11 +6272,16 @@ EOF
 
 	freebsd-elf)
 	  major=".$current"
-	  versuffix=".$current";
+	  versuffix=".$current"
 	  ;;
 
 	irix | nonstopux)
-	  major=`expr $current - $age + 1`
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
 
 	  case $version_type in
 	    nonstopux) verstring_prefix=nonstopux ;;
@@ -3283,8 +6292,10 @@ EOF
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
 	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 
@@ -3294,20 +6305,24 @@ EOF
 	  ;;
 
 	linux)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  ;;
 
 	osf)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
 	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring:${iface}.0"
 	  done
 
@@ -3315,6 +6330,11 @@ EOF
 	  verstring="$verstring:${current}.0"
 	  ;;
 
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
 	sunos)
 	  major=".$current"
 	  versuffix=".$current.$revision"
@@ -3323,14 +6343,13 @@ EOF
 	windows)
 	  # Use '-' rather than '.', since we only want one
 	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
+	  func_arith $current - $age
+	  major=$func_arith_result
 	  versuffix="-$major"
 	  ;;
 
 	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_configuration "unknown library version type \`$version_type'"
 	  ;;
 	esac
 
@@ -3364,7 +6383,7 @@ EOF
 	# Check to see if the archive will have undefined symbols.
 	if test "$allow_undefined" = yes; then
 	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    func_warning "undefined symbols not allowed in $host shared libraries"
 	    build_libtool_libs=no
 	    build_old_libs=yes
 	  fi
@@ -3372,21 +6391,26 @@ EOF
 	  # Don't allow undefined symbols.
 	  allow_undefined_flag="$no_undefined_flag"
 	fi
+
       fi
 
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      libobjs="$libobjs $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
       if test "$mode" != relink; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
-	tempremovelist=`$echo "$output_objdir/*"`
+	tempremovelist=`$ECHO "$output_objdir/*"`
 	for p in $tempremovelist; do
 	  case $p in
-	    *.$objext)
+	    *.$objext | *.gcno)
 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
 		   continue
 		 fi
 	       fi
@@ -3395,10 +6419,8 @@ EOF
 	    *) ;;
 	  esac
 	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
       fi
 
       # Now set the variables for building old libraries.
@@ -3406,15 +6428,15 @@ EOF
 	oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-      done
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+      #done
 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
@@ -3454,12 +6476,12 @@ EOF
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
+	    deplibs="$deplibs System.ltframework"
 	    ;;
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
@@ -3473,7 +6495,7 @@ EOF
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
 	    ;;
- 	  *)
+	  *)
 	    # Add libc to deplibs on all other systems if necessary.
 	    if test "$build_libtool_need_lc" = "yes"; then
 	      deplibs="$deplibs -lc"
@@ -3510,18 +6532,18 @@ EOF
 	  # limits. Maybe even breaks it.  We compile a program, linking it
 	  # against the deplibs as a proxy for the library.  Then we can check
 	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
+	  $opt_dry_run || $RM conftest.c
 	  cat > conftest.c <<EOF
 	  int main() { return 0; }
 EOF
-	  $rm conftest
-	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" -ne "0"; then
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
@@ -3529,40 +6551,41 @@ EOF
 		    i=""
 		    ;;
 		  esac
-	        fi
+		fi
 		if test -n "$i" ; then
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		    newdeplibs="$newdeplibs $i"
 		  else
 		    droppeddeps=yes
-		    $echo
-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
-		    $echo "*** I have the capability to make that library automatically link in when"
-		    $echo "*** you link to this library.  But I can only do this if you have a"
-		    $echo "*** shared version of the library, which I believe you do not have"
-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		    $ECHO
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    $ECHO "*** I have the capability to make that library automatically link in when"
+		    $ECHO "*** you link to this library.  But I can only do this if you have a"
+		    $ECHO "*** shared version of the library, which I believe you do not have"
+		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  else
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
-		$LTCC $LTCFLAGS -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
@@ -3573,44 +6596,47 @@ EOF
 		    esac
 		  fi
 		  if test -n "$i" ; then
-		    libname=`eval \\$echo \"$libname_spec\"`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		    set dummy $deplib_matches
-		    deplib_match=$2
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		      newdeplibs="$newdeplibs $i"
 		    else
 		      droppeddeps=yes
-		      $echo
-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
-		      $echo "*** I have the capability to make that library automatically link in when"
-		      $echo "*** you link to this library.  But I can only do this if you have a"
-		      $echo "*** shared version of the library, which you do not appear to have"
-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      $ECHO
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      $ECHO "*** I have the capability to make that library automatically link in when"
+		      $ECHO "*** you link to this library.  But I can only do this if you have a"
+		      $ECHO "*** shared version of the library, which you do not appear to have"
+		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  $echo
-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "***  make it link in!  You will probably need to install it or some"
-		  $echo "*** library that it depends on before this library will be fully"
-		  $echo "*** functional.  Installing it before continuing would be even better."
+		  $ECHO
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $ECHO "*** make it link in!  You will probably need to install it or some"
+		  $ECHO "*** library that it depends on before this library will be fully"
+		  $ECHO "*** functional.  Installing it before continuing would be even better."
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  fi
 	  ;;
 	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-            if test "$name" != "" && test  "$name" != "0"; then
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
@@ -3620,13 +6646,13 @@ EOF
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
+		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
 			continue
 		      fi
 		      # The statement above tries to avoid entering an
@@ -3639,12 +6665,12 @@ EOF
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | $EGREP "$file_magic_regex" > /dev/null; then
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
 			newdeplibs="$newdeplibs $a_deplib"
 			a_deplib=""
 			break 2
@@ -3654,32 +6680,35 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
+		$ECHO
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a file magic. Last file checked: $potlib"
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
@@ -3689,14 +6718,13 @@ EOF
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
+		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval $echo \"$potent_lib\" 2>/dev/null \
-		        | ${SED} 10q \
-		        | $EGREP "$match_pattern_regex" > /dev/null; then
+		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      newdeplibs="$newdeplibs $a_deplib"
 		      a_deplib=""
 		      break 2
@@ -3706,44 +6734,46 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
+		$ECHO
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	    -e 's/ -[LR][^ ]*//g'`
+	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
 	    done
 	  fi
-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
-	    | grep . >/dev/null; then
-	    $echo
+	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
+	     $GREP . >/dev/null; then
+	    $ECHO
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    $echo "*** All declared inter-library dependencies are being dropped."
+	    $ECHO "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
 	  fi
 	  ;;
@@ -3756,24 +6786,24 @@ EOF
 
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    $echo
-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $echo "*** a static module, that should work as long as the dlopening"
-	    $echo "*** application is linked with the -dlopen flag."
+	    $ECHO
+	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $ECHO "*** a static module, that should work as long as the dlopening"
+	    $ECHO "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      $echo
-	      $echo "*** However, this would only work if libtool was able to extract symbol"
-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $echo "*** not find such a program.  So, this module is probably useless."
-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      $ECHO
+	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
+	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $ECHO "*** not find such a program.  So, this module is probably useless."
+	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -3783,16 +6813,16 @@ EOF
 	      build_libtool_libs=no
 	    fi
 	  else
-	    $echo "*** The inter-library dependencies that have been dropped here will be"
-	    $echo "*** automatically added whenever a program is linked with this library"
-	    $echo "*** or is declared to -dlopen it."
+	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
+	    $ECHO "*** automatically added whenever a program is linked with this library"
+	    $ECHO "*** or is declared to -dlopen it."
 
 	    if test "$allow_undefined" = no; then
-	      $echo
-	      $echo "*** Since this library must not contain undefined symbols,"
-	      $echo "*** because either the platform does not support them or"
-	      $echo "*** it was explicitly requested with -no-undefined,"
-	      $echo "*** libtool will only create a static version of it."
+	      $ECHO
+	      $ECHO "*** Since this library must not contain undefined symbols,"
+	      $ECHO "*** because either the platform does not support them or"
+	      $ECHO "*** it was explicitly requested with -no-undefined,"
+	      $ECHO "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -3806,7 +6836,14 @@ EOF
 	# Done checking deplibs!
 	deplibs=$newdeplibs
       fi
-
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
 
       # move library search paths that coincide with paths to not yet
       # installed libraries to the beginning of the library search list
@@ -3835,7 +6872,6 @@ EOF
       done
       deplibs="$new_libs"
 
-
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
@@ -3906,8 +6942,9 @@ EOF
 	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
-	realname="$2"
-	shift; shift
+	shift
+	realname="$1"
+	shift
 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
@@ -3926,71 +6963,122 @@ EOF
 	done
 
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  delfiles="$delfiles $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
 
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
 	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
+	    func_verbose "generating symbol list for \`$libname.la'"
 	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
+	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
 	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	        $show "$cmd"
-	        $run eval "$cmd" || exit $?
-	        skipped_export=false
+	      func_len " $cmd"
+	      len=$func_len_result
+	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
 	      else
-	        # The command line is too long to execute in one step.
-	        $show "using reloadable object file for export list..."
-	        skipped_export=:
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
 		# Break out early, otherwise skipped_export may be
 		# set to false by a later but shorter cmd.
 		break
 	      fi
 	    done
 	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
 	  fi
 	fi
 
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	fi
 
 	tmp_deplibs=
 	for test_deplib in $deplibs; do
-		case " $convenience " in
-		*" $test_deplib "*) ;;
-		*)
-			tmp_deplibs="$tmp_deplibs $test_deplib"
-			;;
-		esac
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    tmp_deplibs="$tmp_deplibs $test_deplib"
+	    ;;
+	  esac
 	done
 	deplibs="$tmp_deplibs"
 
 	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
 	  if test -n "$whole_archive_flag_spec"; then
 	    save_libobjs=$libobjs
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
 	  else
 	    gentop="$output_objdir/${outputname}x"
 	    generated="$generated $gentop"
 
 	    func_extract_archives $gentop $convenience
 	    libobjs="$libobjs $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	fi
-	
+
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
@@ -3998,7 +7086,7 @@ EOF
 
 	# Make a backup of the uninstalled library when relinking
 	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
 	# Do each of the archive commands.
@@ -4011,22 +7099,24 @@ EOF
 	    cmds=$module_cmds
 	  fi
 	else
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval test_cmds=\"$archive_expsym_cmds\"
-	  cmds=$archive_expsym_cmds
-	else
-	  eval test_cmds=\"$archive_cmds\"
-	  cmds=$archive_cmds
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
 	  fi
 	fi
 
 	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  :
 	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
 
 	  # Save the value of $output and $libobjs because we want to
 	  # use them later.  If we have whole_archive_flag_spec, we
@@ -4040,77 +7130,162 @@ EOF
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
 	  test_cmds=
 	  concat_cmds=
 	  objlist=
-	  delfiles=
 	  last_robj=
 	  k=1
-	  output=$output_objdir/$output_la-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    $ECHO 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      $ECHO "$obj" >> $output
+	    done
+	    $ECHO ')' >> $output
+	    delfiles="$delfiles $output"
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      $ECHO "$obj" >> $output
+	    done
+	    delfiles="$delfiles $output"
+	    output=$firstobj\"$file_list_spec$output\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=$obj
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      delfiles="$delfiles $output"
+
 	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
-	      last_robj=$output_objdir/$output_la-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$output_la-${k}.$objext
-	      objlist=$obj
-	      len=1
 	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
-	  if ${skipped_export-false}; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    libobjs=$output
-	    # Append the command to create the export file.
-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-          fi
-
-	  # Set up a command to remove the reloadable object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
-	  done
 
-	  $echo "creating a temporary reloadable object file: $output"
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
 
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
+		exit $lt_exit
+	      }
+	    done
 	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
 
 	  libobjs=$output
 	  # Restore the value of output.
@@ -4118,6 +7293,7 @@ EOF
 
 	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	  # Expand the library linking commands again to reset the
 	  # value of $libobjs for piecewise linking.
@@ -4130,28 +7306,45 @@ EOF
 	      cmds=$module_cmds
 	    fi
 	  else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    cmds=$archive_expsym_cmds
-	  else
-	    cmds=$archive_cmds
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
 	    fi
 	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
 
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~\$rm $delfiles\"
+	  func_extract_archives $gentop $dlprefiles
+	  libobjs="$libobjs $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
 	fi
+
 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
 	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || {
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
 	    if test "$mode" = relink; then
-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
 	    fi
 
 	    exit $lt_exit
@@ -4161,12 +7354,11 @@ EOF
 
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
 	    if test -z "$whole_archive_flag_spec"; then
-	      $show "${rm}r $gentop"
-	      $run ${rm}r "$gentop"
+	      func_show_eval '${RM}r "$gentop"'
 	    fi
 	  fi
 
@@ -4176,8 +7368,7 @@ EOF
 	# Create links to the real library.
 	for linkname in $linknames; do
 	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
 	  fi
 	done
 
@@ -4190,38 +7381,35 @@ EOF
       ;;
 
     obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+	func_warning "\`-dlopen' is ignored for objects"
       fi
 
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
 
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
 
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
 
       case $output in
       *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
 	;;
       *)
 	libobj=
@@ -4230,7 +7418,7 @@ EOF
       esac
 
       # Delete the old objects.
-      $run $rm $obj $libobj
+      $opt_dry_run || $RM $obj $libobj
 
       # Objects from convenience libraries.  This assumes
       # single-version convenience libraries.  Whenever we create
@@ -4239,12 +7427,14 @@ EOF
       reload_conv_objs=
       gentop=
       # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
       wl=
 
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -4255,24 +7445,15 @@ EOF
       fi
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
-      cmds=$reload_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
+      func_execute_cmds "$reload_cmds" 'exit $?'
 
       # Exit if we aren't doing a library object file.
       if test -z "$libobj"; then
 	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
+	  func_show_eval '${RM}r "$gentop"'
 	fi
 
 	exit $EXIT_SUCCESS
@@ -4280,14 +7461,13 @@ EOF
 
       if test "$build_libtool_libs" != yes; then
 	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
+	  func_show_eval '${RM}r "$gentop"'
 	fi
 
 	# Create an invalid libtool object if no PIC, so that we don't
 	# accidentally link it into a program.
 	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 	exit $EXIT_SUCCESS
       fi
 
@@ -4295,20 +7475,11 @@ EOF
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
 	output="$libobj"
-	cmds=$reload_cmds
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
+	func_execute_cmds "$reload_cmds" 'exit $?'
       fi
 
       if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
+	func_show_eval '${RM}r "$gentop"'
       fi
 
       exit $EXIT_SUCCESS
@@ -4316,39 +7487,45 @@ EOF
 
     prog)
       case $host in
-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
       esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
 
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
 
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	;;
       esac
 
       case $host in
-      *darwin*)
-        # Don't allow lazy linking, it breaks C++ global constructors
-        if test "$tagname" = CXX ; then
-        compile_command="$compile_command ${wl}-bind_at_load"
-        finalize_command="$finalize_command ${wl}-bind_at_load"
-        fi
-        ;;
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      compile_command="$compile_command ${wl}-bind_at_load"
+	      finalize_command="$finalize_command ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
       esac
 
 
@@ -4423,14 +7600,16 @@ EOF
 	  esac
 	fi
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -4482,281 +7661,51 @@ EOF
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
+	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
       fi
 
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
 
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$outputname.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    else
-	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval '$echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
-	    case $host in
-	    *cygwin* | *mingw* )
-	  $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs */
-struct {
-"
-	      ;;
-	    * )
-	  $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-	      ;;
-	    esac
-
-
-	  $echo >> "$output_objdir/$dlsyms" "\
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-          case $host in
-          *cygwin* | *mingw* )
-            if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-            else
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-             fi
-            ;;
-          * )
-            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-            ;;
-          esac
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
       fi
 
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+      wrappers_required=yes
+      case $host in
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
 	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	exit_status=$?
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
 
 	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
 	fi
 
 	exit $exit_status
       fi
 
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
       if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
       fi
@@ -4789,12 +7738,11 @@ static const void *lt_preloaded_setup() {
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
-	$run $rm $output
+	$opt_dry_run || $RM $output
 	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
+	func_show_eval "$link_command" 'exit $?'
 	exit $EXIT_SUCCESS
       fi
 
@@ -4803,13 +7751,13 @@ static const void *lt_preloaded_setup() {
 	link_command="$compile_var$compile_command$compile_rpath"
 	relink_command="$finalize_var$finalize_command$finalize_rpath"
 
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
       else
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -4821,594 +7769,103 @@ static const void *lt_preloaded_setup() {
       fi
 
       # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
+      func_show_eval "$link_command" 'exit $?'
 
       # Now create the wrapper script.
-      $show "creating $output"
+      func_verbose "creating $output"
 
       # Quote the relink command for shipping.
       if test -n "$relink_command"; then
 	# Preserve any variables that may affect compiler behavior
 	for var in $variables_saved_for_relink; do
 	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 	  elif eval var_value=\$$var; test -z "$var_value"; then
 	    relink_command="$var=; export $var; $relink_command"
 	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       fi
 
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+      # Quote $ECHO for shipping.
+      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
 	case $progpath in
 	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
 	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
       else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
       fi
 
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
 	# win32 will think the script is a binary if it has
 	# a .exe suffix, so we strip it off here.
 	case $output in
-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
 	esac
 	# test for cygwin because mv fails w/o .exe extensions
 	case $host in
 	  *cygwin*)
 	    exeext=.exe
-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
 	  *) exeext= ;;
 	esac
 	case $host in
 	  *cygwin* | *mingw* )
-            output_name=`basename $output`
-            output_path=`dirname $output`
-            cwrappersource="$output_path/$objdir/lt-$output_name.c"
-            cwrapper="$output_path/$output_name.exe"
-            $rm $cwrappersource $cwrapper
-            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-	    cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS.  */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int    check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
-  DEBUG("(main) program_name : %s\n",program_name);
-  newargz = XMALLOC(char *, argc+2);
-EOF
-
-            cat >> $cwrappersource <<EOF
-  newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
-            cat >> $cwrappersource <<"EOF"
-  newargz[1] = find_executable(argv[0]);
-  if (newargz[1] == NULL)
-    lt_fatal("Couldn't find %s", argv[0]);
-  DEBUG("(main) found exe at : %s\n",newargz[1]);
-  /* we know the script has the same name, without the .exe */
-  /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
-  for (i = 1; i < argc; i++)
-    newargz[i+1] = xstrdup(argv[i]);
-  newargz[argc+1] = NULL;
-
-  for (i=0; i<argc+1; i++)
-  {
-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
-    ;
-  }
-
-EOF
-
-            case $host_os in
-              mingw*)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",(char const **)newargz);
-EOF
-              ;;
-              *)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",newargz);
-EOF
-              ;;
-            esac
-
-            cat >> $cwrappersource <<"EOF"
-  return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
-  void * p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable(const char * path)
-{
-  struct stat st;
-
-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0) &&
-      (
-        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
-       ((st.st_mode & S_IXUSR) == S_IXUSR))
-      )
-    return 1;
-  else
-    return 0;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
-  int has_slash = 0;
-  const char* p;
-  const char* p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char* concat_name;
-
-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-  {
-    concat_name = xstrdup (wrapper);
-    if (check_executable(concat_name))
-      return concat_name;
-    XFREE(concat_name);
-  }
-  else
-  {
-#endif
-    if (IS_DIR_SEPARATOR (wrapper[0]))
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable(concat_name))
-        return concat_name;
-      XFREE(concat_name);
-    }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-    {
-      has_slash = 1;
-      break;
-    }
-  if (!has_slash)
-  {
-    /* no slashes; search PATH */
-    const char* path = getenv ("PATH");
-    if (path != NULL)
-    {
-      for (p = path; *p; p = p_next)
-      {
-        const char* q;
-        size_t p_len;
-        for (q = p; *q; q++)
-          if (IS_PATH_SEPARATOR(*q))
-            break;
-        p_len = q - p;
-        p_next = (*q == '\0' ? q : q + 1);
-        if (p_len == 0)
-        {
-          /* empty path: current directory */
-          if (getcwd (tmp, LT_PATHMAX) == NULL)
-            lt_fatal ("getcwd failed");
-          tmp_len = strlen(tmp);
-          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, tmp, tmp_len);
-          concat_name[tmp_len] = '/';
-          strcpy (concat_name + tmp_len + 1, wrapper);
-        }
-        else
-        {
-          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, p, p_len);
-          concat_name[p_len] = '/';
-          strcpy (concat_name + p_len + 1, wrapper);
-        }
-        if (check_executable(concat_name))
-          return concat_name;
-        XFREE(concat_name);
-      }
-    }
-    /* not found in PATH; assume curdir */
-  }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen(tmp);
-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable(concat_name))
-    return concat_name;
-  XFREE(concat_name);
-  return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert(str != NULL);
-  assert(pat != NULL);
-
-  len = strlen(str);
-  patlen = strlen(pat);
-
-  if (patlen <= len)
-  {
-    str += len - patlen;
-    if (strcmp(str, pat) == 0)
-      *str = '\0';
-  }
-  return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
-          const char * message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-EOF
-          # we should really use a build-platform specific compiler
-          # here, but OTOH, the wrappers (shell script and this C one)
-          # are only useful if you want to execute the "real" binary.
-          # Since the "real" binary is built for $host, then this
-          # wrapper might as well be built for $host, too.
-          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-          ;;
-        esac
-        $rm $output
-        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  $echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  $echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
 
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
 	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
 
-	*)
-	  $echo >> $output "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
+	    func_emit_wrapper no > $output
+	    chmod +x $output
 	  ;;
 	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit $EXIT_FAILURE
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi\
-"
-	chmod +x $output
-      fi
+      }
       exit $EXIT_SUCCESS
       ;;
     esac
@@ -5417,7 +7874,7 @@ fi\
     for oldlib in $oldlibs; do
 
       if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
+	oldobjs="$libobjs_save $symfileobj"
 	addlibs="$convenience"
 	build_libtool_libs=no
       else
@@ -5426,6 +7883,9 @@ fi\
 	  build_libtool_libs=no
 	else
 	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    oldobjs="$oldobjs $symfileobj"
+	  fi
 	fi
 	addlibs="$old_convenience"
       fi
@@ -5440,8 +7900,18 @@ fi\
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-       cmds=$old_archive_from_new_cmds
+	cmds=$old_archive_from_new_cmds
       else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  oldobjs="$oldobjs $func_extract_archives_result"
+	fi
+
 	# POSIX demands no paths to be encoded in archives.  We have
 	# to avoid creating archives with duplicate basenames if we
 	# might have to extract them afterwards, e.g., when creating a
@@ -5450,32 +7920,22 @@ fi\
 	# not supported by libtool).
 	if (for obj in $oldobjs
 	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  $echo "copying selected object files to avoid basename conflicts..."
-
-	  if test -z "$gentop"; then
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    exit_status=$?
-	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-	      exit $exit_status
-	    fi
-	  fi
-
+	  $ECHO "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
 	  oldobjs=
 	  counter=1
 	  for obj in $save_oldobjs
 	  do
-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *[\ /]"$objbase "*)
@@ -5483,58 +7943,62 @@ fi\
 		# Make sure we don't pick an alternate name that also
 		# overlaps.
 		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
+		func_arith $counter + 1
+		counter=$func_arith_result
 		case " $oldobjs " in
 		*[\ /]"$newobj "*) ;;
 		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
 		esac
 	      done
-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      $run ln "$obj" "$gentop/$newobj" ||
-	      $run cp "$obj" "$gentop/$newobj"
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
 	      oldobjs="$oldobjs $gentop/$newobj"
 	      ;;
 	    *) oldobjs="$oldobjs $obj" ;;
 	    esac
 	  done
 	fi
-
 	eval cmds=\"$old_archive_cmds\"
 
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
+	  func_verbose "using piecewise archive linking..."
 	  save_RANLIB=$RANLIB
 	  RANLIB=:
 	  objlist=
 	  concat_cmds=
 	  save_oldobjs=$oldobjs
-
+	  oldobjs=
 	  # Is there a better way of finding the last object in the list?
 	  for obj in $save_oldobjs
 	  do
 	    last_oldobj=$obj
 	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
 	  for obj in $save_oldobjs
 	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	       test "$len" -le "$max_cmd_len"; then
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
 	      :
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
 	      if test "$obj" = "$last_oldobj" ; then
-	        RANLIB=$save_RANLIB
+		RANLIB=$save_RANLIB
 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=
+	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
@@ -5546,49 +8010,39 @@ fi\
 	  fi
 	fi
       fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-        eval cmd=\"$cmd\"
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
+      func_execute_cmds "$cmds" 'exit $?'
     done
 
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
 
     # Now create the libtool archive.
     case $output in
     *.la)
       old_library=
       test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
+      func_verbose "creating $output"
 
       # Preserve any variables that may affect compiler behavior
       for var in $variables_saved_for_relink; do
 	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 	elif eval var_value=\$$var; test -z "$var_value"; then
 	  relink_command="$var=; export $var; $relink_command"
 	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	fi
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
 
-
       # Only create the output if not a dry run.
-      if test -z "$run"; then
+      $opt_dry_run || {
 	for installed in no yes; do
 	  if test "$installed" = yes; then
 	    if test -z "$install_libdir"; then
@@ -5600,12 +8054,11 @@ fi\
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		func_basename "$deplib"
+		name="$func_basename_result"
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit $EXIT_FAILURE
-		fi
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
 		newdependency_libs="$newdependency_libs $libdir/$name"
 		;;
 	      *) newdependency_libs="$newdependency_libs $deplib" ;;
@@ -5613,25 +8066,37 @@ fi\
 	    done
 	    dependency_libs="$newdependency_libs"
 	    newdlfiles=
+
 	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlfiles="$newdlfiles $libdir/$name"
+		;;
+	      *) newdlfiles="$newdlfiles $lib" ;;
+	      esac
 	    done
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlprefiles="$newdlprefiles $libdir/$name"
+		;;
+	      esac
 	    done
 	    dlprefiles="$newdlprefiles"
 	  else
@@ -5654,15 +8119,15 @@ fi\
 	    done
 	    dlprefiles="$newdlprefiles"
 	  fi
-	  $rm $output
+	  $RM $output
 	  # place dlname in correct position for cygwin
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
-	  $echo > $output "\
+	  $ECHO > $output "\
 # $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -5676,9 +8141,15 @@ library_names='$library_names'
 # The name of the static archive.
 old_library='$old_library'
 
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
 # Libraries that this one depends upon.
 dependency_libs='$dependency_libs'
 
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
 # Version information for $libname.
 current=$current
 age=$age
@@ -5697,746 +8168,29 @@ dlpreopen='$dlprefiles'
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
 	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $echo >> $output "\
+	    $ECHO >> $output "\
 relink_command=\"$relink_command\""
 	  fi
 	done
-      fi
+      }
 
       # Do a symbolic link so that the libtool archive can be found in
       # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
       ;;
     esac
     exit $EXIT_SUCCESS
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) 
-      	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
-      -g | -m | -o) prev=$arg ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  if test "$inst_prefix_dir" = "$destdir"; then
-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-	  else
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
-	  fi
-
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  cmds=$postinstall_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || {
-	      lt_exit=$?
-
-	      # Restore the uninstalled library and exit
-	      if test "$mode" = relink; then
-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	      fi
-
-	      exit $lt_exit
-	    }
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      file=`$echo $file|${SED} 's,.exe$,,'`
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir=`func_mktempdir`
-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway 
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      cmds=$old_postinstall_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  cmds=$finish_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = : && exit $EXIT_SUCCESS
-
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    $echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $echo "   $libdir"
-    done
-    $echo
-    $echo "If you ever happen to want to link against installed libraries"
-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $echo
-    $echo "See any operating system documentation about shared libraries for"
-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit $EXIT_FAILURE
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
+}
 
-      # Restore saved environment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
+{ test "$mode" = link || test "$mode" = relink; } &&
+    func_mode_link ${1+"$@"}
 
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-    ;;
 
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
     files=
     rmforce=
     exit_status=0
@@ -6448,30 +8202,28 @@ relink_command=\"$relink_command\""
     for arg
     do
       case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
+      -f) RM="$RM $arg"; rmforce=yes ;;
+      -*) RM="$RM $arg" ;;
       *) files="$files $arg" ;;
       esac
     done
 
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
 
     rmdirs=
 
     origobjdir="$objdir"
     for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
 	objdir="$origobjdir"
       else
 	objdir="$dir/$origobjdir"
       fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      func_basename "$file"
+      name="$func_basename_result"
       test "$mode" = uninstall && objdir="$dir"
 
       # Remember objdir for removal later, being careful to avoid duplicates
@@ -6483,9 +8235,9 @@ relink_command=\"$relink_command\""
       fi
 
       # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
 	:
       elif test -d "$file"; then
 	exit_status=1
@@ -6499,8 +8251,8 @@ relink_command=\"$relink_command\""
       case $name in
       *.la)
 	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
 
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
@@ -6515,39 +8267,17 @@ relink_command=\"$relink_command\""
 	    *" $dlname "*) ;;
 	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
 	    esac
-	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 	    ;;
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      cmds=$postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      cmds=$old_postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
@@ -6557,20 +8287,20 @@ relink_command=\"$relink_command\""
 
       *.lo)
 	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_p "$file"; then
 
 	  # Read the .lo file
-	  . $dir/$name
+	  func_source $dir/$name
 
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$non_pic_object"
 	  fi
 	fi
@@ -6581,17 +8311,26 @@ relink_command=\"$relink_command\""
 	  noexename=$name
 	  case $file in
 	  *.exe)
-	    file=`$echo $file|${SED} 's,.exe$,,'`
-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
 	    # $file with .exe has already been added to rmfiles,
 	    # add $file without .exe
 	    rmfiles="$rmfiles $file"
 	    ;;
 	  esac
 	  # Do a test to see if this is a libtool program.
-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	    relink_command=
-	    . $dir/$noexename
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
@@ -6606,237 +8345,38 @@ relink_command=\"$relink_command\""
 	fi
 	;;
       esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
     objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
       fi
     done
 
     exit $exit_status
-    ;;
+}
 
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-  esac
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
 
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi # test -z "$show_help"
+test -z "$mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$mode'"
 
 if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
+  eval exec "$exec_cmd"
   exit $EXIT_FAILURE
 fi
 
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
-  exit $EXIT_SUCCESS
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
+exit $exit_status
 
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-  ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
@@ -6850,14 +8390,17 @@ exit $?
 # configuration.  But we'll never go from static-only to shared-only.
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
+build_libtool_libs=no
+build_old_libs=yes
 # ### END LIBTOOL TAG CONFIG: disable-shared
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 # ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
 # mode:shell-script
 # sh-indentation:2
 # End:
+# vi:sw=2
+
diff --git a/libfontenc/ChangeLog b/libfontenc/ChangeLog
index 865010f56..1395951bb 100644
--- a/libfontenc/ChangeLog
+++ b/libfontenc/ChangeLog
@@ -1,3 +1,31 @@
+commit 1c26f6e05dbace09a4720482b67d441000d7d78e
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Fri Aug 28 14:14:11 2009 +1000
+
+    Bump to 1.0.5
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 8a0bd244c5da5baae73c51e45b075b1412682e43
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Mon Feb 2 20:34:38 2009 -0800
+
+    Add README with pointers to mailing list, bugzilla & git repos
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit f160a71e9501a9d650fd99e9a080970bfd520abb
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date:   Wed Jan 28 16:25:32 2009 -0200
+
+    Janitor: Correct make distcheck and compiler warnings.
+
+commit 90f2dfbc40d6fa72213f508b0dd85f00965b6194
+Author: James Cloos <cloos@jhcloos.com>
+Date:   Thu Dec 6 15:51:21 2007 -0500
+
+    Add missing PHONY line for automatic ChangeLog generation
+
 commit 1b4ca41a58016053220047b9f77a2eec812c03a0
 Author: Daniel Stone <daniel@fooishbar.org>
 Date:   Sat Dec 16 01:19:45 2006 +0200
diff --git a/libfontenc/Makefile.am b/libfontenc/Makefile.am
index 77246ede2..c59da58b0 100644
--- a/libfontenc/Makefile.am
+++ b/libfontenc/Makefile.am
@@ -24,11 +24,13 @@ SUBDIRS = src
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = fontenc.pc
 
-EXTRA_DIST = fontenc.pc.in autogen.sh ChangeLog
+EXTRA_DIST = fontenc.pc.in ChangeLog
+MAINTAINERCLEANFILES = ChangeLog
+
+.PHONY: ChangeLog
 
-CLEANFILES = ChangeLog
 ChangeLog:
-	(GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
+	$(CHANGELOG_CMD)
 
 dist-hook: ChangeLog
 
diff --git a/libfontenc/Makefile.in b/libfontenc/Makefile.in
index 11bfb812a..797a98034 100644
--- a/libfontenc/Makefile.in
+++ b/libfontenc/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -35,15 +36,12 @@
 #  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 #  PERFORMANCE OF THIS SOFTWARE.
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -57,38 +55,65 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
+subdir = .
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(srcdir)/fontenc.pc.in $(top_srcdir)/configure AUTHORS \
 	COPYING ChangeLog INSTALL NEWS config.guess config.sub depcomp \
 	install-sh ltmain.sh missing
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES = fontenc.pc
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -96,21 +121,40 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
-AMCMDECHO = @AMCMDECHO@
-AMDEPSHOWCMDSAT = @AMDEPSHOWCMDSAT@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMPRETTYECHO = @AMPRETTYECHO@
-AMSHOWCMDSAT = @AMSHOWCMDSAT@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -119,47 +163,49 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CHANGELOG_CMD = @CHANGELOG_CMD@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
+CWARNFLAGS = @CWARNFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 ENCODINGSDIR = @ENCODINGSDIR@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 FONTENC_CFLAGS = @FONTENC_CFLAGS@
 FONTENC_LIBS = @FONTENC_LIBS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LINT = @LINT@
-LINT_FALSE = @LINT_FALSE@
 LINT_FLAGS = @LINT_FLAGS@
-LINT_TRUE = @LINT_TRUE@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
-LT_QUIET = @LT_QUIET@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -169,17 +215,17 @@ PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PKG_CONFIG = @PKG_CONFIG@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -191,8 +237,10 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
+distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
@@ -209,6 +257,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -218,13 +267,17 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 SUBDIRS = src
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = fontenc.pc
-EXTRA_DIST = fontenc.pc.in autogen.sh ChangeLog
-CLEANFILES = ChangeLog
+EXTRA_DIST = fontenc.pc.in ChangeLog
+MAINTAINERCLEANFILES = ChangeLog
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
@@ -235,95 +288,82 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      @AMPRETTYECHO@ '  [AUTOMAKE  ]  rebuild all'; \
-	      @AMCMDECHO@ ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
-	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	@AMPRETTYECHO@ '  [AUTOMAKE  ]  Makefile'; \
-	@AMCMDECHO@ ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
-	    @AMPRETTYECHO@ '  [SH        ]  config.status'; \
-	    @AMCMDECHO@ ' $(SHELL) ./config.status'; \
+	    echo ' $(SHELL) ./config.status'; \
 	    $(SHELL) ./config.status;; \
 	  *) \
-	    @AMPRETTYECHO@ '  [SH        ]  config.status $@'; \
-	    @AMCMDECHO@ ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	@@AMPRETTYECHO@ '  [SH        ]  config.status'
-	@AMSHOWCMDSAT@$(SHELL) ./config.status --recheck
+	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	@@AMPRETTYECHO@ '  [AUTOCONF  ]  Regenerate'
-	@AMSHOWCMDSAT@cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	@@AMPRETTYECHO@ '  [ACLOCAL   ]  Regenerate'
-	@AMSHOWCMDSAT@cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 
 config.h: stamp-h1
 	@if test ! -f $@; then \
 	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
-	@@AMPRETTYECHO@ '  [SH        ]  Regenerate config.h'
-	@AMSHOWCMDSAT@cd $(top_builddir) && $(SHELL) ./config.status config.h
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	@@AMPRETTYECHO@ '  [AUTOHEADER]  Regenerate'
-	@AMSHOWCMDSAT@cd $(top_srcdir) && $(AUTOHEADER)
-	@AMSHOWCMDSAT@rm -f stamp-h1
-	@AMSHOWCMDSAT@touch $@
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
 
 distclean-hdr:
-	@@AMPRETTYECHO@ '  [RM        ]  config.h stamp-h1'
-	@AMSHOWCMDSAT@-rm -f config.h stamp-h1
+	-rm -f config.h stamp-h1
 fontenc.pc: $(top_builddir)/config.status $(srcdir)/fontenc.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
 
 mostlyclean-libtool:
-	@@AMPRETTYECHO@ '  [RM        ]  *.lo'
-	@AMSHOWCMDSAT@-rm -f *.lo
+	-rm -f *.lo
 
 clean-libtool:
-	@@AMPRETTYECHO@ '  [RM        ]  .libs _libs'
-	@AMSHOWCMDSAT@-rm -rf .libs _libs
+	-rm -rf .libs _libs
 
 distclean-libtool:
-	@@AMPRETTYECHO@ '  [RM        ]  libtool'
-	@AMSHOWCMDSAT@-rm -f libtool
-uninstall-info-am:
+	-rm -f libtool config.lt
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
-	@@AMPRETTYECHO@ '  [MKDIR     ]  $(DESTDIR)$(pkgconfigdir)'
-	@AMSHOWCMDSAT@test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  @AMPRETTYECHO@ "  [INSTALL   ]  '$$d$$p' -> '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  @AMCMDECHO@ " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 	done
 
 uninstall-pkgconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  @AMPRETTYECHO@ "  [RM        ]  $(DESTDIR)$(pkgconfigdir)/$$f"; \
-	  @AMCMDECHO@ " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
-	done
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -349,15 +389,14 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
+$(RECURSIVE_CLEAN_TARGETS):
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
 	  case $$f in \
@@ -384,32 +423,31 @@ maintainer-clean-recursive:
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	@AMSHOWCMDSAT@list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	@AMPRETTYECHO@ '  [MKID      ]  $$unique'; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	@AMSHOWCMDSAT@tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -421,163 +459,178 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  @AMPRETTYECHO@ "  [ETAGS     ]  $$tags"; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	@AMSHOWCMDSAT@tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || ( \
-	     @AMPRETTYECHO@ "  [CTAGS     ]  $$tags"; \
-	     $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique )
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
 
 GTAGS:
-	@@AMPRETTYECHO@ '  [GTAGS     ]'
-	@AMSHOWCMDSAT@here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
-	@@AMPRETTYECHO@ '  [RM        ]  TAGS ID GTAGS GRTAGS GSYMS GPATH tags'
-	@AMSHOWCMDSAT@-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	@AMSHOWCMDSAT@$(am__remove_distdir)
-	@@AMPRETTYECHO@ '  [MKDIR     ]  $(distdir)'
-	@AMSHOWCMDSAT@mkdir $(distdir)
-	@@AMPRETTYECHO@ '  [MKDIR     ]  $(distdir)/.'
-	@AMSHOWCMDSAT@$(mkdir_p) $(distdir)/.
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	@AMSHOWCMDSAT@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
 	done
-	@AMSHOWCMDSAT@$(MAKE) $(AM_MAKEFLAGS) \
+	$(MAKE) $(AM_MAKEFLAGS) \
 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
 	  dist-hook
-	@AMSHOWCMDSAT@-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| ( @AMPRETTYECHO@ '  [CHMOD     ]  a+r $(distdir)'; chmod -R a+r $(distdir) )
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	@@AMPRETTYECHO@ '  [TAR.GZ    ]  $(distdir).tar.gz'
-	@AMSHOWCMDSAT@tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	@AMSHOWCMDSAT@$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
 dist-bzip2: distdir
-	@@AMPRETTYECHO@ '  [TAR.BZ2   ]  $(distdir).tar.bz2'
-	@AMSHOWCMDSAT@tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	@AMSHOWCMDSAT@$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
 
 dist-tarZ: distdir
-	@@AMPRETTYECHO@ '  [TAR.Z     ]  $(distdir).tar.Z'
-	@AMSHOWCMDSAT@tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	@AMSHOWCMDSAT@$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
 
 dist-shar: distdir
-	@@AMPRETTYECHO@ '  [SHAR.GZ   ]  $(distdir).shar.gz'
-	@AMSHOWCMDSAT@shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	@AMSHOWCMDSAT@$(am__remove_distdir)
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
 
 dist-zip: distdir
-	@@AMPRETTYECHO@ '  [ZIP       ]  $(distdir).zip'
-	@AMSHOWCMDSAT@-rm -f $(distdir).zip
-	@AMSHOWCMDSAT@zip -rq $(distdir).zip $(distdir)
-	@AMSHOWCMDSAT@$(am__remove_distdir)
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
 
 dist dist-all: distdir
-	@@AMPRETTYECHO@ '  [TAR.GZ    ]  $(distdir).tar.gz'
-	@AMSHOWCMDSAT@tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	@@AMPRETTYECHO@ '  [TAR.BZ2   ]  $(distdir).tar.bz2'
-	@AMSHOWCMDSAT@tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	@AMSHOWCMDSAT@$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
 # tarfile.
 distcheck: dist
-	@AMSHOWCMDSAT@case '$(DIST_ARCHIVES)' in \
+	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  @AMPRETTYECHO@ '  [UNTAR.GZ  ]  $(distdir).tar.gz'; \
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
-	  @AMPRETTYECHO@ '  [UNTAR.BZ2 ]  $(distdir).tar.bz2'; \
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
-	  @AMPRETTYECHO@ '  [UNTAR.Z   ]  $(distdir).tar.Z'; \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  @AMPRETTYECHO@ '  [UNSHAR.GZ ]  $(distdir).shar.gz'; \
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
-	  @AMPRETTYECHO@ '  [UNZIP     ]  $(distdir).zip'; \
 	  unzip $(distdir).zip ;;\
 	esac
-	@AMSHOWCMDSAT@chmod -R a-w $(distdir); chmod a+w $(distdir)
-	@AMSHOWCMDSAT@mkdir $(distdir)/_build
-	@AMSHOWCMDSAT@mkdir $(distdir)/_inst
-	@AMSHOWCMDSAT@chmod a-w $(distdir)
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
@@ -599,13 +652,15 @@ distcheck: dist
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
@@ -627,8 +682,8 @@ check: check-recursive
 all-am: Makefile $(DATA) config.h
 installdirs: installdirs-recursive
 installdirs-am:
-	@AMSHOWCMDSAT@for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
-	  test -z "$$dir" || ( @AMPRETTYECHO@ "  [MKDIR     ]  $$dir"; $(mkdir_p) "$$dir" ); \
+	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-recursive
 install-exec: install-exec-recursive
@@ -640,32 +695,29 @@ install-am: all-am
 
 installcheck: installcheck-recursive
 install-strip:
-	@AMSHOWCMDSAT@$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 	  `test -z '$(STRIP)' || \
 	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
-	@@AMPRETTYECHO@ '  [RM        ]  $(CLEANFILES)'
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
-	@@AMPRETTYECHO@ '  [RM        ]  $(CONFIG_CLEAN_FILES)'
-	@AMSHOWCMDSAT@-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 clean: clean-recursive
 
 clean-am: clean-generic clean-libtool mostlyclean-am
 
 distclean: distclean-recursive
-	@@AMPRETTYECHO@ '  [RM        ]  $(am__CONFIG_DISTCLEAN_FILES)'
-	@AMSHOWCMDSAT@-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	@@AMPRETTYECHO@ '  [RM        ]  Makefile'
-	@AMSHOWCMDSAT@-rm -f Makefile
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
 distclean-am: clean-am distclean-generic distclean-hdr \
 	distclean-libtool distclean-tags
 
@@ -675,27 +727,44 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
 
 install-data-am: install-pkgconfigDATA
 
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-recursive
+
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
-	@@AMPRETTYECHO@ '  [RM        ]  $(am__CONFIG_DISTCLEAN_FILES)'
-	@AMSHOWCMDSAT@-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	@@AMPRETTYECHO@ '  [RM        ]  autom4te.cache/'
-	@AMSHOWCMDSAT@-rm -rf $(top_srcdir)/autom4te.cache
-	@@AMPRETTYECHO@ '  [RM        ]  Makefile'
-	@AMSHOWCMDSAT@-rm -f Makefile
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-recursive
@@ -710,34 +779,39 @@ ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-pkgconfigDATA
+uninstall-am: uninstall-pkgconfigDATA
 
-uninstall-info: uninstall-info-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+	ctags-recursive install-am install-strip tags-recursive
 
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-	check-am clean clean-generic clean-libtool clean-recursive \
-	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
-	dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-generic distclean-hdr distclean-libtool \
-	distclean-recursive distclean-tags distcleancheck distdir \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
+	dist-zip distcheck distclean distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distcleancheck distdir \
 	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-pkgconfigDATA install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic maintainer-clean-recursive \
-	mostlyclean mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am uninstall-info-am \
-	uninstall-pkgconfigDATA
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-pkgconfigDATA
+
+
+.PHONY: ChangeLog
 
 ChangeLog:
-	(GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
+	$(CHANGELOG_CMD)
 
 dist-hook: ChangeLog
 
 @LINT_TRUE@lint:
 @LINT_TRUE@	(cd src && $(MAKE) $(MFLAGS) lint)
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/libfontenc/README b/libfontenc/README
index e69de29bb..8a6658d49 100644
--- a/libfontenc/README
+++ b/libfontenc/README
@@ -0,0 +1,25 @@
+libfontenc - font encoding library
+
+All questions regarding this software should be directed at the
+Xorg mailing list:
+
+        http://lists.freedesktop.org/mailman/listinfo/xorg
+
+Please submit bug reports to the Xorg bugzilla:
+
+        https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
+
+The master development code repository can be found at:
+
+        git://anongit.freedesktop.org/git/xorg/lib/libfontenc
+
+        http://cgit.freedesktop.org/xorg/lib/libfontenc
+
+For patch submission instructions, see:
+
+	http://www.x.org/wiki/Development/Documentation/SubmittingPatches
+
+For more information on the git code manager, see:
+
+        http://wiki.x.org/wiki/GitPage
+
diff --git a/libfontenc/aclocal.m4 b/libfontenc/aclocal.m4
index a74f0f75f..7fc182575 100644
--- a/libfontenc/aclocal.m4
+++ b/libfontenc/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,103 +11,196 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
 
-# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
+# serial 56 LT_INIT
 
 
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
-         [],
-         [m4_define([AC_PROVIDE_IFELSE],
-	         [m4_ifdef([AC_PROVIDE_$1],
-		           [$2], [$3])])])
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
 
 
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ltmain"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 AC_SUBST(LIBTOOL)dnl
 
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
+_LT_SETUP
 
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
 
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
 AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
 dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
+_LT_CHECK_OBJDIR
 
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -123,114 +216,653 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
-
 # Global variables:
-default_ofile=libtool
+ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
 _LT_CC_BASENAME([$compiler])
 
 # Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
+    _LT_PATH_MAGIC
   fi
   ;;
 esac
 
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
 
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
 
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
 
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
 
-# _LT_AC_SYS_COMPILER
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
 # -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+  ;;
+esac
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  _LT_PROG_XSI_SHELLFNS
+
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
 [AC_REQUIRE([AC_PROG_CC])dnl
 
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -239,35 +871,20 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
 # Allow CC to be a program name with arguments.
 compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
+])# _LT_TAG_COMPILER
 
 
 # _LT_COMPILER_BOILERPLATE
 # ------------------------
 # Check for compiler boilerplate output or warnings with
 # the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 ])# _LT_COMPILER_BOILERPLATE
 
 
@@ -275,70 +892,203 @@ $rm conftest*
 # ----------------------
 # Check for linker boilerplate output or warnings with
 # the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi])
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
 
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
 # Links a minimal program and checks the executable
 # for the system default hardcoded library path. In most cases,
 # this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi],[])
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
+])# _LT_SYS_MODULE_PATH_AIX
 
 
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
 [ifdef([AC_DIVERSION_NOTICE],
 	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
 	 [AC_DIVERT_PUSH(NOTICE)])
 $1
 AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
+])# _LT_SHELL_INIT
 
 
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
 # Add some code to the start of the generated configure script which
 # will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X[$]1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X[$]1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -348,9 +1098,9 @@ fi
 if test "X[$]1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 [$]*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -358,124 +1108,127 @@ fi
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
       else
-	# maybe with a smaller string...
-	prev=:
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "[$]0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
 fi
 
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
 
 
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
 [AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -486,12 +1239,12 @@ ia64-*-hpux*)
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
     esac
   fi
   rm -rf conftest*
@@ -500,72 +1253,79 @@ ia64-*-hpux*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
   fi
   rm -rf conftest*
   ;;
 
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
     esac
   fi
   rm -rf conftest*
@@ -577,7 +1337,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
     [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
      AC_LANG_POP])
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
@@ -592,38 +1352,75 @@ sparc*-*solaris*)
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
       esac
       ;;
     esac
   fi
   rm -rf conftest*
   ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-  ])
 esac
 
 need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
 
-])# _LT_AC_LOCK
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
 
 
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
 #		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
 # ----------------------------------------------------------------
 # Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$3"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -642,40 +1439,47 @@ AC_CACHE_CHECK([$1], [$2],
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 else
-    ifelse([$6], , :, [$6])
+    m4_if([$6], , :, [$6])
 fi
-])# AC_LIBTOOL_COMPILER_OPTION
+])# _LT_COMPILER_OPTION
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
 
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
   [$2=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $3"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
      # The linker can only warn and ignore the option if not recognized
      # So say no if there are warnings
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -684,22 +1488,28 @@ AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
        $2=yes
      fi
    fi
-   $rm conftest*
+   $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
+    m4_if([$4], , :, [$4])
 else
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 fi
-])# AC_LIBTOOL_LINKER_OPTION
+])# _LT_LINKER_OPTION
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
 
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
@@ -721,7 +1531,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=-1;
     ;;
 
-  cygwin* | mingw*)
+  cygwin* | mingw* | cegcc*)
     # On Win9x/ME, this test blows up -- it succeeds, but takes
     # about 5 minutes as the teststring grows exponentially.
     # Worse, since 9x/ME are not pre-emptively multitasking,
@@ -776,30 +1586,41 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
     ;;
   *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      teststring=$teststring$teststring
-    done
-    teststring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
     ;;
   esac
 ])
@@ -808,27 +1629,35 @@ if test -n $lt_cv_sys_max_cmd_len ; then
 else
   AC_MSG_RESULT(none)
 fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
 
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
 
 
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "$cross_compiling" = yes; then :
   [$4]
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
+  cat > conftest.$ac_ext <<_LT_EOF
 [#line __oline__ "configure"
 #include "confdefs.h"
 
@@ -870,10 +1699,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -889,9 +1714,9 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }]
-EOF
+_LT_EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
@@ -906,13 +1731,13 @@ EOF
   fi
 fi
 rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
+])# _LT_TRY_DLOPEN_SELF
 
 
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
@@ -928,15 +1753,15 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   darwin*)
   # if libdl is installed we need to link against it
@@ -946,13 +1771,13 @@ else
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ])
-   ;;
+    ;;
 
   *)
     AC_CHECK_FUNC([shl_load],
 	  [lt_cv_dlopen="shl_load"],
       [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
 	[AC_CHECK_FUNC([dlopen],
 	      [lt_cv_dlopen="dlopen"],
 	  [AC_CHECK_LIB([dl], [dlopen],
@@ -960,7 +1785,7 @@ else
 	    [AC_CHECK_LIB([svld], [dlopen],
 		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
 	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
 	      ])
 	    ])
 	  ])
@@ -988,7 +1813,7 @@ else
 
     AC_CACHE_CHECK([whether a program can dlopen itself],
 	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
 	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
     ])
@@ -996,8 +1821,8 @@ else
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
 	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
       ])
@@ -1019,22 +1844,36 @@ else
   *) enable_dlopen_self_static=unknown ;;
   esac
 fi
-])# AC_LIBTOOL_DLOPEN_SELF
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
 
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
 AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -1054,37 +1893,41 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
      fi
    fi
    chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $rm conftest*
+   $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
    cd ..
-   rmdir conftest
-   $rm conftest*
+   $RM -r conftest
+   $RM conftest*
 ])
-])# AC_LIBTOOL_PROG_CC_C_O
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
 
 
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
 # Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
 
 hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING([if we can lock with hard links])
   hard_links=yes
-  $rm conftest*
+  $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -1097,12 +1940,13 @@ if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks"
 else
   need_locks=no
 fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
 
 
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
 [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
 [rm -f .libs 2>/dev/null
 mkdir .libs 2>/dev/null
@@ -1114,40 +1958,46 @@ else
 fi
 rmdir .libs 2>/dev/null])
 objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
 
 
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
 # Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
     # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+    _LT_TAGVAR(hardcode_action, $1)=relink
   else
     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+    _LT_TAGVAR(hardcode_action, $1)=immediate
   fi
 else
   # We cannot hardcode anything, or else we can only hardcode existing
   # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
 fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -1155,43 +2005,107 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
 
 
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
 old_striplib=
 AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
   AC_MSG_RESULT([yes])
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         AC_MSG_RESULT([yes])
-       else
-  AC_MSG_RESULT([no])
-fi
-       ;;
-   *)
-  AC_MSG_RESULT([no])
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
     ;;
   esac
 fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
 
 
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# _LT_SYS_DYNAMIC_LINKER([TAG])
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -1205,20 +2119,6 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -1236,7 +2136,7 @@ aix3*)
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[[4-9]]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1255,7 +2155,7 @@ aix4* | aix5*)
       aix4 | aix4.[[01]] | aix4.[[01]].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
@@ -1281,9 +2181,18 @@ aix4* | aix5*)
   ;;
 
 amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
   ;;
 
 beos*)
@@ -1306,25 +2215,28 @@ bsdi[[45]]*)
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
-       $rm \$dlpath'
+       $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
@@ -1333,20 +2245,20 @@ cygwin* | mingw* | pw32*)
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
         # It is most probably a Windows format PATH printed by
         # mingw gcc, but we are running on Cygwin. Gcc prints its search
         # path with ; separators, and with drive letters. We can handle the
         # drive letters (cygwin fileutils understands them), so leave them,
         # especially as we might pass files found there to a mingw objdump,
         # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
       ;;
     pw32*)
@@ -1370,17 +2282,13 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -1434,7 +2342,7 @@ freebsd* | dragonfly*)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
-  freebsd*) # from 4.6 on
+  *) # from 4.6 on, and DragonFly
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
@@ -1473,18 +2381,18 @@ hpux9* | hpux10* | hpux11*)
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
@@ -1497,7 +2405,7 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[[3-9]]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1561,15 +2469,29 @@ linux* | k*bsd*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
+
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -1581,23 +2503,11 @@ linux* | k*bsd*-gnu)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
@@ -1618,14 +2528,16 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx*)
-  version_type=linux
+*nto* | *qnx*)
+  version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
@@ -1634,13 +2546,13 @@ openbsd*)
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[[89]] | openbsd2.[[89]].*)
 	shlibpath_overrides_runpath=no
@@ -1674,6 +2586,10 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
+rdos*)
+  dynamic_linker=no
+  ;;
+
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -1708,7 +2624,6 @@ sysv4 | sysv4.3*)
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
@@ -1739,13 +2654,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -1755,6 +2669,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1773,276 +2698,54 @@ variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-        [include additional configurations @<:@automatic@:>@])],
-    [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  AC_LIBTOOL_LANG_CXX_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-	  AC_LIBTOOL_LANG_F77_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-	  AC_LIBTOOL_LANG_GCJ_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
 
-# AC_LIBTOOL_PICMODE([MODE])
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
 # --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
 AC_MSG_CHECKING([for $1])
 AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 [case $MAGIC_CMD in
@@ -2055,7 +2758,7 @@ AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 dnl $ac_dummy forces splitting on constant user-supplied paths.
 dnl POSIX.2 word splitting is done only on the output of word expansions,
 dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
   for ac_dir in $ac_dummy; do
     IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
@@ -2070,7 +2773,7 @@ dnl not every word.  This closes a longstanding sh security hole.
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -2081,7 +2784,7 @@ dnl not every word.  This closes a longstanding sh security hole.
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -2098,37 +2801,47 @@ if test -n "$MAGIC_CMD"; then
 else
   AC_MSG_RESULT(no)
 fi
-])# AC_PATH_TOOL_PREFIX
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
 
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
 
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
   else
     MAGIC_CMD=:
   fi
 fi
-])# AC_PATH_MAGIC
+])# _LT_PATH_MAGIC
 
 
-# AC_PROG_LD
+# LT_PATH_LD
 # ----------
 # find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
@@ -2145,9 +2858,9 @@ if test "$GCC" = yes; then
     [[\\/]]* | ?:[[\\/]]*)
       re_direlt='/[[^/]][[^/]]*/\.\./'
       # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -2197,15 +2910,24 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
 
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
 
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
 [# I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
@@ -2216,14 +2938,14 @@ case `$LD -v 2>&1 </dev/null` in
   ;;
 esac])
 with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
+])# _LT_PATH_LD_GNU
 
 
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
+# _LT_CMD_RELOAD
+# --------------
 # find reload flag for linker
 #   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+m4_defun([_LT_CMD_RELOAD],
 [AC_CACHE_CHECK([for $LD option to reload object files],
   lt_cv_ld_reload_flag,
   [lt_cv_ld_reload_flag='-r'])
@@ -2242,15 +2964,19 @@ case $host_os in
     fi
     ;;
 esac
-])# AC_PROG_LD_RELOAD_FLAG
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
 
 
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
 # how to check for library dependencies
 #  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
 lt_cv_deplibs_check_method,
 [lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -2267,7 +2993,7 @@ lt_cv_deplibs_check_method='unknown'
 # whether `pass_all' will *always* work, you probably want this one.
 
 case $host_os in
-aix4* | aix5*)
+aix[[4-9]]*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -2289,8 +3015,20 @@ cygwin*)
 
 mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
   ;;
 
@@ -2299,7 +3037,7 @@ darwin* | rhapsody*)
   ;;
 
 freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
@@ -2336,7 +3074,7 @@ hpux10.20* | hpux11*)
   esac
   ;;
 
-interix3*)
+interix[[3-9]]*)
   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
   lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
   ;;
@@ -2356,8 +3094,8 @@ linux* | k*bsd*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd* | netbsdelf*-gnu)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -2370,12 +3108,12 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -2386,10 +3124,18 @@ osf3* | osf4* | osf5*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
@@ -2417,7 +3163,7 @@ sysv4 | sysv4.3*)
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -2425,20 +3171,26 @@ esac
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
 
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
 
-# AC_PROG_NM
+
+# LT_PATH_NM
 # ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
   lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then 
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
@@ -2474,16 +3226,51 @@ else
     done
     IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  : ${lt_cv_path_NM=no}
 fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
 
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
 
-# AC_CHECK_LIBM
-# -------------
+
+# LT_LIB_M
+# --------
 # check for math library
-AC_DEFUN([AC_CHECK_LIBM],
+AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
@@ -2498,2104 +3285,46 @@ case $host in
   AC_CHECK_LIB(m, cos, LIBM="-lm")
   ;;
 esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!).  If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, lt_dlinit,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+AC_SUBST([LIBM])
+])# LT_LIB_M
 
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  AC_PROG_LD
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-    # as there is no search path for DLLs.
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-        case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-        esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes ; then
-      lt_int_apple_cc_single_mod=no
-      output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-       lt_int_apple_cc_single_mod=yes
-      fi
-      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      else
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-        fi
-        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          else
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          fi
-            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-      fi
-        ;;
 
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[[12]]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    aCC*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-      case $host_cpu in
-      hppa*64*|ia64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-        ;;
-      *)
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-    *)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
-    esac
-
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    hppa*64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    *)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  interix3*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC*)
-        # Portland Group C++ compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd* | netbsdelf*-gnu)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  openbsd*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    fi
-    output_verbose_link_cmd='echo'
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker. We must also pass each convience library through
-	    # to the system linker between allextract/defaultextract.
-	    # The C++ compiler will combine linker options so we
-	    # cannot just pass the convience library names through
-	    # without $wl.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix3*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_AC_TAGVAR(predep_objects,$1)=
-  _LT_AC_TAGVAR(postdep_objects,$1)=
-  _LT_AC_TAGVAR(postdeps,$1)=
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
-    ;;
-  esac
-  ;;
-esac
-])
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="      program t\n      end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(hardcode_automatic, $1) \
-    _LT_AC_TAGVAR(module_cmds, $1) \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(module_cmds, $1) | \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
-
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
 
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
     [-fno-rtti -fno-exceptions], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
 fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
 
 
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 AC_MSG_CHECKING([command to parse $NM output from $compiler object])
 AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
@@ -4609,33 +3338,18 @@ symcode='[[BCDEGRST]]'
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
 # Define system-specific variables.
 case $host_os in
 aix*)
   symcode='[[BCDT]]'
   ;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   symcode='[[ABCDGISTW]]'
   ;;
-hpux*) # Its linker distinguishes data from code symbols
+hpux*)
   if test "$host_cpu" = ia64; then
     symcode='[[ABCDEGRST]]'
   fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDGIRSTW]]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
   ;;
 irix* | nonstopux*)
   symcode='[[BCDEGRST]]'
@@ -4660,44 +3374,72 @@ sysv4)
   ;;
 esac
 
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
 # Handle CRLF in mingw tool chain
 opt_cr=
 case $build_os in
 mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
   ;;
 esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
+# Try without a prefix underscore, then with it.
 for ac_symprfx in "" "_"; do
 
   # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
   symxfrm="\\1 $ac_symprfx\\2 \\2"
 
   # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
 
   # Check to see that the pipe works correctly.
   pipe_works=no
 
   rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
+  cat > conftest.$ac_ext <<_LT_EOF
 #ifdef __cplusplus
 extern "C" {
 #endif
 char nm_test_var;
-void nm_test_func(){}
+void nm_test_func(void);
+void nm_test_func(void){}
 #ifdef __cplusplus
 }
 #endif
 int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+_LT_EOF
 
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
@@ -4711,48 +3453,50 @@ EOF
       fi
 
       # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-EOF
+_LT_EOF
 	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
+	  cat <<_LT_EOF >> conftest.$ac_ext
 
-/* The mapping between symbol names and symbols. */
+/* The mapping between symbol names and symbols.  */
 const struct {
   const char *name;
-  lt_ptr_t address;
+  void       *address;
 }
-lt_preloaded_symbols[[]] =
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
 {
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
 };
 
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
 #ifdef __cplusplus
 }
 #endif
-EOF
+_LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_save_LIBS="$LIBS"
 	  lt_save_CFLAGS="$CFLAGS"
 	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
 	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
@@ -4771,7 +3515,7 @@ EOF
     echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
     cat conftest.$ac_ext >&5
   fi
-  rm -f conftest* conftst*
+  rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
   if test "$pipe_works" = yes; then
@@ -4789,115 +3533,136 @@ if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; the
 else
   AC_MSG_RESULT(ok)
 fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
 
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
 
 AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
+m4_if([$1], [CXX], [
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
+
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
-    mingw* | os2* | pw32*)
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
     *djgpp*)
       # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
-    interix3*)
+    interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
       fi
       ;;
     hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
       case $host_cpu in
-      hppa*64*|ia64*)
+      hppa*64*)
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	;;
       esac
       ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
   else
     case $host_os in
-      aix4* | aix5*)
+      aix[[4-9]]*)
 	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
 	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
 	fi
 	;;
       chorus*)
 	case $cc_basename in
 	cxch68*)
 	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
 	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           ;;
-         esac
-       ;;
       dgux*)
 	case $cc_basename in
 	  ec++*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
 	  ghcx*)
 	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  *)
 	    ;;
@@ -4909,21 +3674,21 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       hpux9* | hpux10* | hpux11*)
 	case $cc_basename in
 	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	    fi
 	    ;;
 	  aCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
 	      ;;
 	    *)
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	      ;;
 	    esac
 	    ;;
@@ -4938,8 +3703,8 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       irix5* | irix6* | nonstopux*)
 	case $cc_basename in
 	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    # CC pic flag -KPIC is the default.
 	    ;;
 	  *)
@@ -4950,29 +3715,50 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
-	  pgCC*)
-	    # Portland Group C++ compiler.
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	  cxx*)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	    ;;
 	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
 	    ;;
 	esac
 	;;
@@ -4983,30 +3769,35 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       mvs*)
 	case $cc_basename in
 	  cxx*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
-      netbsd* | netbsdelf*-gnu)
+      netbsd*)
 	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
 	  KCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    ;;
 	  RCC*)
 	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  cxx*)
 	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
 	  *)
 	    ;;
@@ -5018,13 +3809,13 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	case $cc_basename in
 	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	    ;;
 	  gcx*)
 	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	    ;;
 	  *)
 	    ;;
@@ -5034,82 +3825,107 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	case $cc_basename in
 	  CC*)
 	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	  lcc*)
 	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
       tandem*)
 	case $cc_basename in
 	  NCC*)
 	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
       vxworks*)
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
 	;;
     esac
   fi
 ],
 [
   if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
 
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
-    interix3*)
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -5117,64 +3933,48 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       enable_shared=no
       ;;
 
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
       fi
       ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
     aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       esac
-       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
       case $host_cpu in
@@ -5182,213 +3982,274 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	# +Z the default
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     linux* | k*bsd*-gnu)
       case $cc_basename in
-      icc* | ecc*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
         ;;
       ccc*)
-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
         # All Alpha code is PIC.
-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	esac
+	;;
       esac
       ;;
 
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
     osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
       f77* | f90* | f95*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
       esac
       ;;
 
     sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     unicos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
 
     uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
     esac
   fi
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
 case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
     ;;
   *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
 
 #
 # Check to make sure the static flag actually works.
 #
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
   $lt_tmp_static_flag,
   [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
 
 
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
 # See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
-  aix4* | aix5*)
+  aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
-  linux* | k*bsd*-gnu)
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+  cygwin* | mingw* | cegcc*)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   esac
-],[
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
   runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-  _LT_AC_TAGVAR(module_cmds, $1)=
-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
   # include_expsyms should be a list of space-separated symbols to be *always*
   # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
+  _LT_TAGVAR(include_expsyms, $1)=
   # exclude_expsyms can be an extended regexp of symbols to exclude
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
   extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  _LT_CC_BASENAME([$compiler])
+
   case $host_os in
-  cygwin* | mingw* | pw32*)
+  cygwin* | mingw* | pw32* | cegcc*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
@@ -5405,7 +4266,7 @@ ifelse([$1],[CXX],[
     ;;
   esac
 
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  _LT_TAGVAR(ld_shlibs, $1)=yes
   if test "$with_gnu_ld" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
@@ -5414,16 +4275,16 @@ ifelse([$1],[CXX],[
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
+    case `$LD -v 2>&1` in
       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -5433,11 +4294,11 @@ ifelse([$1],[CXX],[
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[[3-9]]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
@@ -5445,49 +4306,50 @@ ifelse([$1],[CXX],[
 *** really care for shared libraries, you may want to modify your PATH
 *** so that a non-GNU linker is found, and then restart.
 
-EOF
+_LT_EOF
       fi
       ;;
 
     amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
       ;;
 
     beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
 	  cp $export_symbols $output_objdir/$soname.def;
 	else
 	  echo EXPORTS > $output_objdir/$soname.def;
@@ -5495,71 +4357,109 @@ EOF
 	fi~
 	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
-    interix3*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
 	tmp_addflag=
+	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
 	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
 	  tmp_addflag=' -i_dynamic -nofor_main' ;;
 	ifc* | ifort*)			# Intel Fortran compiler
 	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
 	esac
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+        _LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
     solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
 *** create shared libraries on Solaris systems.  Therefore, libtool
@@ -5568,19 +4468,19 @@ EOF
 *** your PATH or compiler configuration so that the native linker is
 *** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
       case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) 
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
@@ -5593,58 +4493,62 @@ EOF
 _LT_EOF
 	;;
 	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
-	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
 	;;
       esac
       ;;
 
     sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
     esac
 
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
       runpath_var=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
     case $host_os in
     aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
       if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[[4-9]]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -5654,22 +4558,22 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
 	  done
 	  ;;
 	esac
@@ -5684,30 +4588,32 @@ _LT_EOF
       # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
       # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
       if test "$GCC" = yes; then
 	case $host_os in aix4.[[012]]|aix4.[[012]].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
-  	  # We have reworked collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  # We have reworked collect2
+	  :
 	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
 	  fi
 	  ;;
 	esac
@@ -5718,8 +4624,8 @@ _LT_EOF
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
 	  if test "$aix_use_runtimelinking" = yes; then
@@ -5730,130 +4636,94 @@ _LT_EOF
 	fi
       fi
 
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(always_export_symbols, $1)=yes
       if test "$aix_use_runtimelinking" = yes; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       _LT_AC_SYS_LIBPATH_AIX
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
 	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
 	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
 
     amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
       ;;
 
     bsdi[[45]]*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
       ;;
 
-    cygwin* | mingw* | pw32*)
+    cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
       # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
     darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-    fi
+      _LT_DARWIN_LINKER_FEATURES($1)
       ;;
 
     dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      _LT_TAGVAR(ld_shlibs, $1)=no
       ;;
 
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
@@ -5861,60 +4731,60 @@ _LT_EOF
     # does not break anything, and helps significantly (at the cost of a little
     # extra space).
     freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
     freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     hpux9*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       ;;
 
     hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
       if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
-	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
       fi
       ;;
 
@@ -5922,45 +4792,45 @@ _LT_EOF
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	case $host_cpu in
 	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
 	  ;;
 	esac
       fi
@@ -5968,191 +4838,221 @@ _LT_EOF
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        AC_LINK_IFELSE(int foo(void) {},
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+        )
+        LDFLAGS="$save_LDFLAGS"
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
       ;;
 
     openbsd*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
       else
-       case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	   ;;
-	 *)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
-	wlarc=''
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       case $host_os in
       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
       *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
       esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
     sunos4*)
       if test "x$host_vendor" = xsequent; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     sysv4)
       case $host_vendor in
 	sni)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
 	;;
 	siemens)
 	  ## LD is ld it makes a PLAMLIB
 	  ## CC just makes a GrossModule.
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
         ;;
 	motorola)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
 	;;
       esac
       runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	runpath_var=LD_RUN_PATH
 	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
       fi
       ;;
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -6163,50 +5063,65 @@ _LT_EOF
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      _LT_TAGVAR(ld_shlibs, $1)=no
       ;;
     esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
   fi
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
 
 #
 # Do we need to explicitly link libc?
 #
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
 x|xyes)
   # Assume -lc should be added
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
   if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    case $_LT_TAGVAR(archive_cmds, $1) in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
       ;;
@@ -6215,119 +5130,1924 @@ x|xyes)
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
       AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
         soname=conftest
         lib=conftest
         libobjs=conftest.$ac_objext
         deplibs=
-        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
         compiler_flags=-v
         linker_flags=-v
         verstring=
         output_objdir=.
         libname=conftest
-        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+        _LT_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
         then
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
         else
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
         fi
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
       else
         cat conftest.err 1>&5
       fi
-      $rm conftest*
-      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      $RM conftest*
+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
       ;;
     esac
   fi
   ;;
 esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
 
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+    [[If ld is used when linking, flag to hardcode $libdir into a binary
+    during linking.  This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+    [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
 
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
+# Source file extension for C test sources.
+ac_ext=c
 
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
 
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+        # as there is no search path for DLLs.
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+        _LT_TAGVAR(always_export_symbols, $1)=no
+        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+          # If the export-symbols file already is a .def file (1st line
+          # is EXPORTS), use it as is; otherwise, prepend...
+          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    cp $export_symbols $output_objdir/$soname.def;
+          else
+	    echo EXPORTS > $output_objdir/$soname.def;
+	    cat $export_symbols >> $output_objdir/$soname.def;
+          fi~
+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        else
+          _LT_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd[[12]]*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      gnu*)
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 will use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  xl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='echo'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=echo
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='echo'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
 # ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${F77-"f77"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${FC-"f95"}
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
 
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
 
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
 
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
 
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
 ])
 
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
 ])
 
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
 # NOTE: This macro has been submitted for inclusion into   #
 #  GNU Autoconf as AC_PROG_SED.  When it is available in   #
 #  a released version of Autoconf we should remove this    #
 #  macro and use it instead.                               #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
+
+m4_defun([AC_PROG_SED],
 [AC_MSG_CHECKING([for a sed that does not truncate output])
 AC_CACHE_VAL(lt_cv_path_SED,
 [# Loop through the user's path and test for sed and gsed.
@@ -6345,6 +7065,7 @@ do
     done
   done
 done
+IFS=$as_save_IFS
 lt_ac_max=0
 lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
@@ -6377,9 +7098,876 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
 done
 ])
 SED=$lt_cv_path_SED
+AC_SUBST([SED])
 AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $[*] ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
+
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$[@]"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]+=\$[2]"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]=\$$[1]\$[2]"
+}
+
+_LT_EOF
+    ;;
+  esac
+])
+
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
+
+
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [0], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
 ])
 
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
+
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# Generated from ltversion.in.
+
+# serial 3012 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.2.6])
+m4_define([LT_PACKAGE_REVISION], [1.3012])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.2.6'
+macro_revision='1.3012'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
+
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 4 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+
 # pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
 # 
 # Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
@@ -6448,16 +8036,14 @@ fi])
 # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
 # ---------------------------------------------
 m4_define([_PKG_CONFIG],
-[if test -n "$PKG_CONFIG"; then
-    if test -n "$$1"; then
-        pkg_cv_[]$1="$$1"
-    else
-        PKG_CHECK_EXISTS([$3],
-                         [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
-			 [pkg_failed=yes])
-    fi
-else
-	pkg_failed=untried
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
 fi[]dnl
 ])# _PKG_CONFIG
 
@@ -6501,9 +8087,9 @@ See the pkg-config man page for more details.])
 if test $pkg_failed = yes; then
         _PKG_SHORT_ERRORS_SUPPORTED
         if test $_pkg_short_errors_supported = yes; then
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"`
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
         else 
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
@@ -6518,7 +8104,8 @@ installed software in a non-standard prefix.
 
 _PKG_TEXT
 ])],
-		[$4])
+		[AC_MSG_RESULT([no])
+                $4])
 elif test $pkg_failed = untried; then
 	ifelse([$4], , [AC_MSG_FAILURE(dnl
 [The pkg-config script could not be found or is too old.  Make sure it
@@ -6527,7 +8114,7 @@ path to pkg-config.
 
 _PKG_TEXT
 
-To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.])],
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],
 		[$4])
 else
 	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
@@ -6537,491 +8124,7 @@ else
 fi[]dnl
 ])# PKG_CHECK_MODULES
 
-dnl
-dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
-dnl 
-dnl Permission is hereby granted, free of charge, to any person obtaining a
-dnl copy of this software and associated documentation files (the
-dnl "Software"), to deal in the Software without restriction, including
-dnl without limitation the rights to use, copy, modify, merge, publish,
-dnl distribute, and/or sell copies of the Software, and to permit persons
-dnl to whom the Software is furnished to do so, provided that the above
-dnl copyright notice(s) and this permission notice appear in all copies of
-dnl the Software and that both the above copyright notice(s) and this
-dnl permission notice appear in supporting documentation.
-dnl
-dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
-dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
-dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
-dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
-dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
-dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-dnl
-dnl Except as contained in this notice, the name of a copyright holder
-dnl shall not be used in advertising or otherwise to promote the sale, use
-dnl or other dealings in this Software without prior written authorization
-dnl of the copyright holder.
-
-# XORG_MACROS_VERSION(required-version)
-# -------------------------------------
-# Minimum version: 1.1.0
-#
-# If you're using a macro added in Version 1.1 or newer, include this in
-# your configure.ac with the minimum required version, such as:
-# XORG_MACROS_VERSION(1.1)
-#
-# To force at least a version with this macro defined, also add:
-# m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
-#
-#
-# See the "minimum version" comment for each macro you use to see what 
-# version you require.
-AC_DEFUN([XORG_MACROS_VERSION],[
-	[XORG_MACROS_needed_version=$1
-	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
-	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
-	AC_MSG_CHECKING([if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}])
-	[XORG_MACROS_version=1.1.3
-	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
-	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
-	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
-		AC_MSG_ERROR([configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x])
-	fi
-	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
-		AC_MSG_ERROR([configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer])
-	fi
-	AC_MSG_RESULT([yes, $XORG_MACROS_version])
-]) # XORG_MACROS_VERSION
-
-# XORG_PROG_RAWCPP()
-# ------------------
-# Minimum version: 1.0.0
-#
-# Find cpp program and necessary flags for use in pre-processing text files
-# such as man pages and config files
-AC_DEFUN([XORG_PROG_RAWCPP],[
-AC_REQUIRE([AC_PROG_CPP])
-AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}], 
-   [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])
-
-# Check for flag to avoid builtin definitions - assumes unix is predefined,
-# which is not the best choice for supporting other OS'es, but covers most
-# of the ones we need for now.
-AC_MSG_CHECKING([if $RAWCPP requires -undef])
-AC_LANG_CONFTEST([Does cpp redefine unix ?])
-if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
-	AC_MSG_RESULT([no])
-else
-	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
-		RAWCPPFLAGS=-undef
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
-	fi
-fi
-rm -f conftest.$ac_ext
-
-AC_MSG_CHECKING([if $RAWCPP requires -traditional])
-AC_LANG_CONFTEST([Does cpp preserve   "whitespace"?])
-if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
-	AC_MSG_RESULT([no])
-else
-	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
-		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do.])
-	fi
-fi
-rm -f conftest.$ac_ext
-AC_SUBST(RAWCPPFLAGS)
-]) # XORG_PROG_RAWCPP
-
-# XORG_MANPAGE_SECTIONS()
-# -----------------------
-# Minimum version: 1.0.0
-#
-# Determine which sections man pages go in for the different man page types
-# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
-# Not sure if there's any better way than just hardcoding by OS name.
-# Override default settings by setting environment variables
-
-AC_DEFUN([XORG_MANPAGE_SECTIONS],[
-AC_REQUIRE([AC_CANONICAL_HOST])
-
-if test x$APP_MAN_SUFFIX = x    ; then
-    APP_MAN_SUFFIX=1
-fi
-if test x$APP_MAN_DIR = x    ; then
-    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
-fi
-
-if test x$LIB_MAN_SUFFIX = x    ; then
-    LIB_MAN_SUFFIX=3
-fi
-if test x$LIB_MAN_DIR = x    ; then
-    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
-fi
-
-if test x$FILE_MAN_SUFFIX = x    ; then
-    case $host_os in
-	solaris*)	FILE_MAN_SUFFIX=4  ;;
-	*)		FILE_MAN_SUFFIX=5  ;;
-    esac
-fi
-if test x$FILE_MAN_DIR = x    ; then
-    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
-fi
-
-if test x$MISC_MAN_SUFFIX = x    ; then
-    case $host_os in
-	solaris*)	MISC_MAN_SUFFIX=5  ;;
-	*)		MISC_MAN_SUFFIX=7  ;;
-    esac
-fi
-if test x$MISC_MAN_DIR = x    ; then
-    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
-fi
-
-if test x$DRIVER_MAN_SUFFIX = x    ; then
-    case $host_os in
-	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
-	*)		DRIVER_MAN_SUFFIX=4  ;;
-    esac
-fi
-if test x$DRIVER_MAN_DIR = x    ; then
-    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
-fi
-
-if test x$ADMIN_MAN_SUFFIX = x    ; then
-    case $host_os in
-	solaris*)	ADMIN_MAN_SUFFIX=1m ;;
-	*)		ADMIN_MAN_SUFFIX=8  ;;
-    esac
-fi
-if test x$ADMIN_MAN_DIR = x    ; then
-    ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
-fi
-
-
-AC_SUBST([APP_MAN_SUFFIX])
-AC_SUBST([LIB_MAN_SUFFIX])
-AC_SUBST([FILE_MAN_SUFFIX])
-AC_SUBST([MISC_MAN_SUFFIX])
-AC_SUBST([DRIVER_MAN_SUFFIX])
-AC_SUBST([ADMIN_MAN_SUFFIX])
-AC_SUBST([APP_MAN_DIR])
-AC_SUBST([LIB_MAN_DIR])
-AC_SUBST([FILE_MAN_DIR])
-AC_SUBST([MISC_MAN_DIR])
-AC_SUBST([DRIVER_MAN_DIR])
-AC_SUBST([ADMIN_MAN_DIR])
-]) # XORG_MANPAGE_SECTIONS
-
-# XORG_CHECK_LINUXDOC
-# -------------------
-# Minimum version: 1.0.0
-#
-# Defines the variable MAKE_TEXT if the necessary tools and
-# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
-# Whether or not the necessary tools and files are found can be checked
-# with the AM_CONDITIONAL "BUILD_LINUXDOC"
-AC_DEFUN([XORG_CHECK_LINUXDOC],[
-XORG_SGML_PATH=$prefix/share/sgml
-HAVE_DEFS_ENT=
-
-AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
-
-AC_PATH_PROG(LINUXDOC, linuxdoc)
-AC_PATH_PROG(PS2PDF, ps2pdf)
-
-AC_MSG_CHECKING([Whether to build documentation])
-
-if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
-   BUILDDOC=yes
-else
-   BUILDDOC=no
-fi
-
-AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])
-
-AC_MSG_RESULT([$BUILDDOC])
-
-AC_MSG_CHECKING([Whether to build pdf documentation])
-
-if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
-   BUILDPDFDOC=yes
-else
-   BUILDPDFDOC=no
-fi
-
-AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
-
-AC_MSG_RESULT([$BUILDPDFDOC])
-
-MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
-MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
-MAKE_PDF="$PS2PDF"
-MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"
-
-AC_SUBST(MAKE_TEXT)
-AC_SUBST(MAKE_PS)
-AC_SUBST(MAKE_PDF)
-AC_SUBST(MAKE_HTML)
-]) # XORG_CHECK_LINUXDOC
-
-# XORG_CHECK_DOCBOOK
-# -------------------
-# Minimum version: 1.0.0
-#
-# Checks for the ability to build output formats from SGML DocBook source.
-# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
-# indicates whether the necessary tools and files are found and, if set,
-# $(MAKE_XXX) blah.sgml will produce blah.xxx.
-AC_DEFUN([XORG_CHECK_DOCBOOK],[
-XORG_SGML_PATH=$prefix/share/sgml
-HAVE_DEFS_ENT=
-BUILDTXTDOC=no
-BUILDPDFDOC=no
-BUILDPSDOC=no
-BUILDHTMLDOC=no
-
-AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
-
-AC_PATH_PROG(DOCBOOKPS, docbook2ps)
-AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
-AC_PATH_PROG(DOCBOOKHTML, docbook2html)
-AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
-
-AC_MSG_CHECKING([Whether to build text documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
-   test x$BUILD_TXTDOC != xno; then
-	BUILDTXTDOC=yes
-fi
-AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
-AC_MSG_RESULT([$BUILDTXTDOC])
-
-AC_MSG_CHECKING([Whether to build PDF documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
-   test x$BUILD_PDFDOC != xno; then
-	BUILDPDFDOC=yes
-fi
-AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
-AC_MSG_RESULT([$BUILDPDFDOC])
-
-AC_MSG_CHECKING([Whether to build PostScript documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
-   test x$BUILD_PSDOC != xno; then
-	BUILDPSDOC=yes
-fi
-AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
-AC_MSG_RESULT([$BUILDPSDOC])
-
-AC_MSG_CHECKING([Whether to build HTML documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
-   test x$BUILD_HTMLDOC != xno; then
-	BUILDHTMLDOC=yes
-fi
-AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
-AC_MSG_RESULT([$BUILDHTMLDOC])
-
-MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
-MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
-MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
-MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
-
-AC_SUBST(MAKE_TEXT)
-AC_SUBST(MAKE_PS)
-AC_SUBST(MAKE_PDF)
-AC_SUBST(MAKE_HTML)
-]) # XORG_CHECK_DOCBOOK
-
-# XORG_CHECK_MALLOC_ZERO
-# ----------------------
-# Minimum version: 1.0.0
-#
-# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
-# malloc(0) returns NULL.  Packages should add one of these cflags to
-# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
-AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
-AC_ARG_ENABLE(malloc0returnsnull,
-	AC_HELP_STRING([--enable-malloc0returnsnull],
-		       [malloc(0) returns NULL (default: auto)]),
-	[MALLOC_ZERO_RETURNS_NULL=$enableval],
-	[MALLOC_ZERO_RETURNS_NULL=auto])
-
-AC_MSG_CHECKING([whether malloc(0) returns NULL])
-if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
-	AC_RUN_IFELSE([
-char *malloc();
-char *realloc();
-char *calloc();
-main() {
-    char *m0, *r0, *c0, *p;
-    m0 = malloc(0);
-    p = malloc(10);
-    r0 = realloc(p,0);
-    c0 = calloc(0);
-    exit(m0 == 0 || r0 == 0 || c0 == 0 ? 0 : 1);
-}],
-		[MALLOC_ZERO_RETURNS_NULL=yes],
-		[MALLOC_ZERO_RETURNS_NULL=no])
-fi
-AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])
-
-if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
-	MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
-	XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
-	XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
-else
-	MALLOC_ZERO_CFLAGS=""
-	XMALLOC_ZERO_CFLAGS=""
-	XTMALLOC_ZERO_CFLAGS=""
-fi
-
-AC_SUBST([MALLOC_ZERO_CFLAGS])
-AC_SUBST([XMALLOC_ZERO_CFLAGS])
-AC_SUBST([XTMALLOC_ZERO_CFLAGS])
-]) # XORG_CHECK_MALLOC_ZERO
-
-# XORG_WITH_LINT()
-# ----------------
-# Minimum version: 1.1.0
-#
-# Sets up flags for source checkers such as lint and sparse if --with-lint
-# is specified.   (Use --with-lint=sparse for sparse.)
-# Sets $LINT to name of source checker passed with --with-lint (default: lint)
-# Sets $LINT_FLAGS to flags to pass to source checker
-# Sets LINT automake conditional if enabled (default: disabled)
-#
-AC_DEFUN([XORG_WITH_LINT],[
-
-# Allow checking code with lint, sparse, etc.
-AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
-		[Use a lint-style source code checker (default: disabled)])],
-		[use_lint=$withval], [use_lint=no])
-if test "x$use_lint" = "xyes" ; then
-	LINT="lint"
-else
-	LINT="$use_lint"
-fi
-if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
-    case $LINT in
-	lint|*/lint)
-	    case $host_os in
-		solaris*)
-			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
-			;;
-	    esac
-	    ;;
-    esac
-fi
-
-AC_SUBST(LINT)
-AC_SUBST(LINT_FLAGS)
-AM_CONDITIONAL(LINT, [test x$LINT != xno])
-
-]) # XORG_WITH_LINT
-
-# XORG_LINT_LIBRARY(LIBNAME)
-# --------------------------
-# Minimum version: 1.1.0
-#
-# Sets up flags for building lint libraries for checking programs that call
-# functions in the library.
-# Disabled by default, enable with --enable-lint-library
-# Sets: 
-#	@LINTLIB@		- name of lint library file to make
-#	MAKE_LINT_LIB		- automake conditional
-#
-
-AC_DEFUN([XORG_LINT_LIBRARY],[
-AC_REQUIRE([XORG_WITH_LINT])
-# Build lint "library" for more indepth checks of programs calling this library
-AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
-	[Create lint library (default: disabled)])],
-	[make_lint_lib=$enableval], [make_lint_lib=no])
-if test "x$make_lint_lib" != "xno" ; then
-	if test "x$LINT" = "xno" ; then
-		AC_MSG_ERROR([Cannot make lint library without --with-lint])
-	fi
-	if test "x$make_lint_lib" = "xyes" ; then
-		LINTLIB=llib-l$1.ln
-	else
-		LINTLIB=$make_lint_lib
-	fi
-fi
-AC_SUBST(LINTLIB)
-AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
-
-]) # XORG_LINT_LIBRARY
-
-dnl Copyright 2005 Red Hat, Inc
-dnl
-dnl Permission to use, copy, modify, distribute, and sell this software and its
-dnl documentation for any purpose is hereby granted without fee, provided that
-dnl the above copyright notice appear in all copies and that both that
-dnl copyright notice and this permission notice appear in supporting
-dnl documentation.
-dnl
-dnl The above copyright notice and this permission notice shall be included
-dnl in all copies or substantial portions of the Software.
-dnl
-dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-dnl OTHER DEALINGS IN THE SOFTWARE.
-dnl
-dnl Except as contained in this notice, the name of the copyright holders shall
-dnl not be used in advertising or otherwise to promote the sale, use or
-dnl other dealings in this Software without prior written authorization
-dnl from the copyright holders.
-dnl
-
-# XORG_RELEASE_VERSION
-# --------------------
-# Adds --with/without-release-string and changes the PACKAGE and
-# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION".  If
-# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.  Also
-# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
- 
-AC_DEFUN([XORG_RELEASE_VERSION],[
-	AC_ARG_WITH(release-version,
-			AC_HELP_STRING([--with-release-version=STRING],
-				[Use release version string in package name]),
-			[RELEASE_VERSION="$withval"],
-			[RELEASE_VERSION=""])
-	if test "x$RELEASE_VERSION" != "x"; then
-		PACKAGE="$PACKAGE-$RELEASE_VERSION"
-		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-		AC_MSG_NOTICE([Building with package name set to $PACKAGE])
-	fi
-	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
-		[`echo $PACKAGE_VERSION | sed -ne 's/^\([[^\.]]\+\).*/\1/p'`],
-		[Major version of this package])
-	PVM=`echo $PACKAGE_VERSION | sed -ne 's/^\([[^\.]]\+\)\.\([[^\.]]\+\).*/\2/p'`
-	if test "x$PVM" = "x"; then
-		PVM="0"
-	fi
-	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
-		[$PVM],
-		[Minor version of this package])
-	PVP=`echo $PACKAGE_VERSION | sed -ne 's/^\([[^\.]]\+\)\.\([[^\.]]\+\)\.\([[^\.]]\+\).*/\3/p'`
-	if test "x$PVP" = "x"; then
-		PVP="0"
-	fi
-	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
-		[$PVP],
-		[Patch version of this package])
-])
-
-# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -7031,14 +8134,31 @@ AC_DEFUN([XORG_RELEASE_VERSION],[
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
 
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.6])])
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -7095,14 +8215,14 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 7
+# serial 9
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -7111,8 +8231,11 @@ AC_DEFUN([AM_CONDITIONAL],
 [AC_PREREQ(2.52)dnl
  ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
 	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
@@ -7126,15 +8249,14 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 8
+# serial 10
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -7162,6 +8284,7 @@ AC_REQUIRE([AM_DEP_TRACK])dnl
 ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
        [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
        [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
        [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                    [depcc="$$1"   am_compiler_list=])
 
@@ -7190,6 +8313,16 @@ AC_CACHE_CHECK([dependency style of $depcc],
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
   fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -7207,7 +8340,17 @@ AC_CACHE_CHECK([dependency style of $depcc],
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -7217,18 +8360,23 @@ AC_CACHE_CHECK([dependency style of $depcc],
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -7279,61 +8427,74 @@ if test "x$enable_dependency_tracking" != xno; then
   AMDEPBACKSLASH='\'
 fi
 AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
 ])
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 3
+#serial 5
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
   done
-done
+}
 ])# _AM_OUTPUT_DEPENDENCY_COMMANDS
 
 
@@ -7364,14 +8525,14 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 12
+# serial 16
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -7388,16 +8549,20 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.62])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
 AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
 fi
 
 # test whether we have cygpath
@@ -7417,6 +8582,9 @@ m4_ifval([$2],
  AC_SUBST([PACKAGE], [$1])dnl
  AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
  AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
  AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 
@@ -7432,8 +8600,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
@@ -7441,21 +8609,37 @@ AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
-AC_REQUIRE([AM_PRETTY_CMDS])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
 
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
@@ -7466,18 +8650,19 @@ AC_REQUIRE([AM_PRETTY_CMDS])
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
+_am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -7488,7 +8673,14 @@ echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
 AC_SUBST(install_sh)])
 
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
@@ -7515,27 +8707,38 @@ AC_SUBST([am__leading_dot])])
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well.  Anyway, the user
+# can override the default with the --enable/--disable switch.
 AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode  enable make rules and dependencies not useful
+[m4_case(m4_default([$1], [disable]),
+       [enable], [m4_define([am_maintainer_other], [disable])],
+       [disable], [m4_define([am_maintainer_other], [enable])],
+       [m4_define([am_maintainer_other], [enable])
+        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+  AC_ARG_ENABLE([maintainer-mode],
+[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
+      [USE_MAINTAINER_MODE=$enableval],
+      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
   AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
   MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
+  AC_SUBST([MAINT])dnl
 ]
 )
 
@@ -7543,13 +8746,13 @@ AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # AM_MAKE_INCLUDE()
 # -----------------
@@ -7558,7 +8761,7 @@ AC_DEFUN([AM_MAKE_INCLUDE],
 [am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
@@ -7568,24 +8771,24 @@ am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 AC_SUBST([am__include])
 AC_SUBST([am__quote])
@@ -7595,14 +8798,14 @@ rm -f confinc confmf
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 6
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -7618,7 +8821,15 @@ AC_SUBST($1)])
 # If it does, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
@@ -7628,7 +8839,7 @@ else
 fi
 ])
 
-# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -7636,70 +8847,33 @@ fi
 
 # AM_PROG_MKDIR_P
 # ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake.  There are at least two reasons why we must not
-# use `-m 0755':
-#   - it causes special bits like SGID to be ignored,
-#   - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out.  Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
 AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
-  else
-    mkdir_p='$(install_sh) -d'
-  fi
-fi
-AC_SUBST([mkdir_p])])
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -7716,7 +8890,7 @@ AC_DEFUN([_AM_SET_OPTION],
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
@@ -7724,52 +8898,16 @@ AC_DEFUN([_AM_SET_OPTIONS],
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-
-# AM_PRETTY_CMDS
-# ------------
-AC_DEFUN([AM_PRETTY_CMDS],
-[AC_ARG_ENABLE(pretty-cmds,
-[  --disable-pretty-cmds          show all commands executed
-  --enable-pretty-cmds           do not output the entire command lines])
-AMSHOWCMDSAT=''
-AMDEPSHOWCMDSAT=''
-AMPRETTYECHO=true
-AMCMDECHO=echo
-if test "x$enable_pretty_cmds" = xyes;
-then
-  AMSHOWCMDSAT='@'
-  _AM_IF_OPTION([no-dependencies],,test "x$enable_dependency_tracking" = xno &&) AMDEPSHOWCMDSAT='@'
-  AMPRETTYECHO=echo
-  AMCMDECHO=true
-  LT_QUIET='--quiet'
-fi
-AC_SUBST([AMSHOWCMDSAT])
-AC_SUBST([AMDEPSHOWCMDSAT])
-AC_SUBST([AMPRETTYECHO])
-AC_SUBST([AMCMDECHO])
-AC_SUBST([LT_QUIET])
-])
-
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # AM_SANITY_CHECK
 # ---------------
@@ -7778,16 +8916,29 @@ AC_DEFUN([AM_SANITY_CHECK],
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$[*]" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -7812,6 +8963,33 @@ Check your system clock])
 fi
 AC_MSG_RESULT(yes)])
 
+# Copyright (C) 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# (`yes' being less verbose, `no' or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules],
+[  --enable-silent-rules          less verbose build output (undo: `make V=1')
+  --disable-silent-rules         verbose build output (undo: `make V=0')])
+case $enable_silent_rules in
+yes) AM_DEFAULT_VERBOSITY=0;;
+no)  AM_DEFAULT_VERBOSITY=1;;
+*)   AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
@@ -7837,9 +9015,28 @@ dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
 if test "$cross_compiling" != no; then
   AC_CHECK_TOOL([STRIP], [strip], :)
 fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
 # Check how to create a tarball.                            -*- Autoconf -*-
 
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.
@@ -7936,3 +9133,540 @@ AC_SUBST([am__tar])
 AC_SUBST([am__untar])
 ]) # _AM_PROG_TAR
 
+dnl xorg-macros.m4.  Generated from xorg-macros.m4.in xorgversion.m4 by configure.
+dnl
+dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
+dnl 
+dnl Permission is hereby granted, free of charge, to any person obtaining a
+dnl copy of this software and associated documentation files (the
+dnl "Software"), to deal in the Software without restriction, including
+dnl without limitation the rights to use, copy, modify, merge, publish,
+dnl distribute, and/or sell copies of the Software, and to permit persons
+dnl to whom the Software is furnished to do so, provided that the above
+dnl copyright notice(s) and this permission notice appear in all copies of
+dnl the Software and that both the above copyright notice(s) and this
+dnl permission notice appear in supporting documentation.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of a copyright holder
+dnl shall not be used in advertising or otherwise to promote the sale, use
+dnl or other dealings in this Software without prior written authorization
+dnl of the copyright holder.
+
+# XORG_MACROS_VERSION(required-version)
+# -------------------------------------
+# Minimum version: 1.1.0
+#
+# If you're using a macro added in Version 1.1 or newer, include this in
+# your configure.ac with the minimum required version, such as:
+# XORG_MACROS_VERSION(1.1)
+#
+# To ensure that this macro is defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION],
+#     [m4_fatal([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+#
+#
+# See the "minimum version" comment for each macro you use to see what 
+# version you require.
+m4_defun([XORG_MACROS_VERSION],[
+m4_define([vers_have], [1.2.2])
+m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
+m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
+m4_if(m4_cmp(maj_have, maj_needed), 0,,
+    [m4_fatal([xorg-macros major version ]maj_needed[ is required but ]vers_have[ found])])
+m4_if(m4_version_compare(vers_have, [$1]), -1,
+    [m4_fatal([xorg-macros version $1 or higher is required but ]vers_have[ found])])
+m4_undefine([vers_have])
+m4_undefine([maj_have])
+m4_undefine([maj_needed])
+]) # XORG_MACROS_VERSION
+
+# XORG_PROG_RAWCPP()
+# ------------------
+# Minimum version: 1.0.0
+#
+# Find cpp program and necessary flags for use in pre-processing text files
+# such as man pages and config files
+AC_DEFUN([XORG_PROG_RAWCPP],[
+AC_REQUIRE([AC_PROG_CPP])
+AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}], 
+   [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])
+
+# Check for flag to avoid builtin definitions - assumes unix is predefined,
+# which is not the best choice for supporting other OS'es, but covers most
+# of the ones we need for now.
+AC_MSG_CHECKING([if $RAWCPP requires -undef])
+AC_LANG_CONFTEST([Does cpp redefine unix ?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS=-undef
+		AC_MSG_RESULT([yes])
+	# under Cygwin unix is still defined even with -undef
+	elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS="-undef -ansi"
+		AC_MSG_RESULT([yes, with -ansi])
+	else
+		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+
+AC_MSG_CHECKING([if $RAWCPP requires -traditional])
+AC_LANG_CONFTEST([Does cpp preserve   "whitespace"?])
+if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+	AC_MSG_RESULT([no])
+else
+	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
+		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do.])
+	fi
+fi
+rm -f conftest.$ac_ext
+AC_SUBST(RAWCPPFLAGS)
+]) # XORG_PROG_RAWCPP
+
+# XORG_MANPAGE_SECTIONS()
+# -----------------------
+# Minimum version: 1.0.0
+#
+# Determine which sections man pages go in for the different man page types
+# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
+# Not sure if there's any better way than just hardcoding by OS name.
+# Override default settings by setting environment variables
+
+AC_DEFUN([XORG_MANPAGE_SECTIONS],[
+AC_REQUIRE([AC_CANONICAL_HOST])
+
+if test x$APP_MAN_SUFFIX = x    ; then
+    APP_MAN_SUFFIX=1
+fi
+if test x$APP_MAN_DIR = x    ; then
+    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
+fi
+
+if test x$LIB_MAN_SUFFIX = x    ; then
+    LIB_MAN_SUFFIX=3
+fi
+if test x$LIB_MAN_DIR = x    ; then
+    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
+fi
+
+if test x$FILE_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	FILE_MAN_SUFFIX=4  ;;
+	*)		FILE_MAN_SUFFIX=5  ;;
+    esac
+fi
+if test x$FILE_MAN_DIR = x    ; then
+    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
+fi
+
+if test x$MISC_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	MISC_MAN_SUFFIX=5  ;;
+	*)		MISC_MAN_SUFFIX=7  ;;
+    esac
+fi
+if test x$MISC_MAN_DIR = x    ; then
+    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
+fi
+
+if test x$DRIVER_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
+	*)		DRIVER_MAN_SUFFIX=4  ;;
+    esac
+fi
+if test x$DRIVER_MAN_DIR = x    ; then
+    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
+fi
+
+if test x$ADMIN_MAN_SUFFIX = x    ; then
+    case $host_os in
+	solaris*)	ADMIN_MAN_SUFFIX=1m ;;
+	*)		ADMIN_MAN_SUFFIX=8  ;;
+    esac
+fi
+if test x$ADMIN_MAN_DIR = x    ; then
+    ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
+fi
+
+
+AC_SUBST([APP_MAN_SUFFIX])
+AC_SUBST([LIB_MAN_SUFFIX])
+AC_SUBST([FILE_MAN_SUFFIX])
+AC_SUBST([MISC_MAN_SUFFIX])
+AC_SUBST([DRIVER_MAN_SUFFIX])
+AC_SUBST([ADMIN_MAN_SUFFIX])
+AC_SUBST([APP_MAN_DIR])
+AC_SUBST([LIB_MAN_DIR])
+AC_SUBST([FILE_MAN_DIR])
+AC_SUBST([MISC_MAN_DIR])
+AC_SUBST([DRIVER_MAN_DIR])
+AC_SUBST([ADMIN_MAN_DIR])
+]) # XORG_MANPAGE_SECTIONS
+
+# XORG_CHECK_LINUXDOC
+# -------------------
+# Minimum version: 1.0.0
+#
+# Defines the variable MAKE_TEXT if the necessary tools and
+# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
+# Whether or not the necessary tools and files are found can be checked
+# with the AM_CONDITIONAL "BUILD_LINUXDOC"
+AC_DEFUN([XORG_CHECK_LINUXDOC],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+
+if test x"$cross_compiling" = x"yes" ; then
+  HAVE_DEFS_ENT=no
+else
+  AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+fi
+
+AC_PATH_PROG(LINUXDOC, linuxdoc)
+AC_PATH_PROG(PS2PDF, ps2pdf)
+
+AC_MSG_CHECKING([Whether to build documentation])
+
+if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
+   BUILDDOC=yes
+else
+   BUILDDOC=no
+fi
+
+AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])
+
+AC_MSG_RESULT([$BUILDDOC])
+
+AC_MSG_CHECKING([Whether to build pdf documentation])
+
+if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
+   BUILDPDFDOC=yes
+else
+   BUILDPDFDOC=no
+fi
+
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
+MAKE_PDF="$PS2PDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_LINUXDOC
+
+# XORG_CHECK_DOCBOOK
+# -------------------
+# Minimum version: 1.0.0
+#
+# Checks for the ability to build output formats from SGML DocBook source.
+# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
+# indicates whether the necessary tools and files are found and, if set,
+# $(MAKE_XXX) blah.sgml will produce blah.xxx.
+AC_DEFUN([XORG_CHECK_DOCBOOK],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+BUILDTXTDOC=no
+BUILDPDFDOC=no
+BUILDPSDOC=no
+BUILDHTMLDOC=no
+
+AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+
+AC_PATH_PROG(DOCBOOKPS, docbook2ps)
+AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
+AC_PATH_PROG(DOCBOOKHTML, docbook2html)
+AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
+
+AC_MSG_CHECKING([Whether to build text documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
+   test x$BUILD_TXTDOC != xno; then
+	BUILDTXTDOC=yes
+fi
+AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
+AC_MSG_RESULT([$BUILDTXTDOC])
+
+AC_MSG_CHECKING([Whether to build PDF documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
+   test x$BUILD_PDFDOC != xno; then
+	BUILDPDFDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+AC_MSG_CHECKING([Whether to build PostScript documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
+   test x$BUILD_PSDOC != xno; then
+	BUILDPSDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
+AC_MSG_RESULT([$BUILDPSDOC])
+
+AC_MSG_CHECKING([Whether to build HTML documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
+   test x$BUILD_HTMLDOC != xno; then
+	BUILDHTMLDOC=yes
+fi
+AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
+AC_MSG_RESULT([$BUILDHTMLDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
+MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_DOCBOOK
+
+# XORG_CHECK_MALLOC_ZERO
+# ----------------------
+# Minimum version: 1.0.0
+#
+# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
+# malloc(0) returns NULL.  Packages should add one of these cflags to
+# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
+AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
+AC_ARG_ENABLE(malloc0returnsnull,
+	AC_HELP_STRING([--enable-malloc0returnsnull],
+		       [malloc(0) returns NULL (default: auto)]),
+	[MALLOC_ZERO_RETURNS_NULL=$enableval],
+	[MALLOC_ZERO_RETURNS_NULL=auto])
+
+AC_MSG_CHECKING([whether malloc(0) returns NULL])
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
+	AC_RUN_IFELSE([
+char *malloc();
+char *realloc();
+char *calloc();
+main() {
+    char *m0, *r0, *c0, *p;
+    m0 = malloc(0);
+    p = malloc(10);
+    r0 = realloc(p,0);
+    c0 = calloc(0);
+    exit(m0 == 0 || r0 == 0 || c0 == 0 ? 0 : 1);
+}],
+		[MALLOC_ZERO_RETURNS_NULL=yes],
+		[MALLOC_ZERO_RETURNS_NULL=no])
+fi
+AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])
+
+if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
+	MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
+	XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
+	XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
+else
+	MALLOC_ZERO_CFLAGS=""
+	XMALLOC_ZERO_CFLAGS=""
+	XTMALLOC_ZERO_CFLAGS=""
+fi
+
+AC_SUBST([MALLOC_ZERO_CFLAGS])
+AC_SUBST([XMALLOC_ZERO_CFLAGS])
+AC_SUBST([XTMALLOC_ZERO_CFLAGS])
+]) # XORG_CHECK_MALLOC_ZERO
+
+# XORG_WITH_LINT()
+# ----------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for source checkers such as lint and sparse if --with-lint
+# is specified.   (Use --with-lint=sparse for sparse.)
+# Sets $LINT to name of source checker passed with --with-lint (default: lint)
+# Sets $LINT_FLAGS to flags to pass to source checker
+# Sets LINT automake conditional if enabled (default: disabled)
+#
+AC_DEFUN([XORG_WITH_LINT],[
+
+# Allow checking code with lint, sparse, etc.
+AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
+		[Use a lint-style source code checker (default: disabled)])],
+		[use_lint=$withval], [use_lint=no])
+if test "x$use_lint" = "xyes" ; then
+	LINT="lint"
+else
+	LINT="$use_lint"
+fi
+if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
+    case $LINT in
+	lint|*/lint)
+	    case $host_os in
+		solaris*)
+			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
+			;;
+	    esac
+	    ;;
+    esac
+fi
+
+AC_SUBST(LINT)
+AC_SUBST(LINT_FLAGS)
+AM_CONDITIONAL(LINT, [test x$LINT != xno])
+
+]) # XORG_WITH_LINT
+
+# XORG_LINT_LIBRARY(LIBNAME)
+# --------------------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for building lint libraries for checking programs that call
+# functions in the library.
+# Disabled by default, enable with --enable-lint-library
+# Sets: 
+#	@LINTLIB@		- name of lint library file to make
+#	MAKE_LINT_LIB		- automake conditional
+#
+
+AC_DEFUN([XORG_LINT_LIBRARY],[
+AC_REQUIRE([XORG_WITH_LINT])
+# Build lint "library" for more indepth checks of programs calling this library
+AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
+	[Create lint library (default: disabled)])],
+	[make_lint_lib=$enableval], [make_lint_lib=no])
+if test "x$make_lint_lib" != "xno" ; then
+	if test "x$LINT" = "xno" ; then
+		AC_MSG_ERROR([Cannot make lint library without --with-lint])
+	fi
+	if test "x$make_lint_lib" = "xyes" ; then
+		LINTLIB=llib-l$1.ln
+	else
+		LINTLIB=$make_lint_lib
+	fi
+fi
+AC_SUBST(LINTLIB)
+AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
+
+]) # XORG_LINT_LIBRARY
+
+# XORG_CWARNFLAGS
+# ---------------
+# Minimum version: 1.2.0
+#
+# Defines CWARNFLAGS to enable C compiler warnings.
+#
+AC_DEFUN([XORG_CWARNFLAGS], [
+AC_REQUIRE([AC_PROG_CC])
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `$CC -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
+	;;
+    esac
+else
+    AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
+    fi
+fi
+AC_SUBST(CWARNFLAGS)
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+]) # XORG_CWARNFLAGS
+dnl Copyright 2005 Red Hat, Inc
+dnl
+dnl Permission to use, copy, modify, distribute, and sell this software and its
+dnl documentation for any purpose is hereby granted without fee, provided that
+dnl the above copyright notice appear in all copies and that both that
+dnl copyright notice and this permission notice appear in supporting
+dnl documentation.
+dnl
+dnl The above copyright notice and this permission notice shall be included
+dnl in all copies or substantial portions of the Software.
+dnl
+dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+dnl OTHER DEALINGS IN THE SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of the copyright holders shall
+dnl not be used in advertising or otherwise to promote the sale, use or
+dnl other dealings in this Software without prior written authorization
+dnl from the copyright holders.
+dnl
+
+# XORG_RELEASE_VERSION
+# --------------------
+# Adds --with/without-release-string and changes the PACKAGE and
+# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION".  If
+# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.  Also
+# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
+ 
+AC_DEFUN([XORG_RELEASE_VERSION],[
+	AC_ARG_WITH(release-version,
+			AC_HELP_STRING([--with-release-version=STRING],
+				[Use release version string in package name]),
+			[RELEASE_VERSION="$withval"],
+			[RELEASE_VERSION=""])
+	if test "x$RELEASE_VERSION" != "x"; then
+		PACKAGE="$PACKAGE-$RELEASE_VERSION"
+		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
+		AC_MSG_NOTICE([Building with package name set to $PACKAGE])
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
+		[`echo $PACKAGE_VERSION | cut -d . -f 1`],
+		[Major version of this package])
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
+	if test "x$PVM" = "x"; then
+		PVM="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
+		[$PVM],
+		[Minor version of this package])
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
+	if test "x$PVP" = "x"; then
+		PVP="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
+		[$PVP],
+		[Patch version of this package])
+])
+
+# XORG_CHANGELOG()
+# ----------------
+# Minimum version: 1.2.0
+#
+# Defines the variable CHANGELOG_CMD as the command to generate
+# ChangeLog from git.
+#
+# Arrange that distcleancheck ignores ChangeLog left over by distclean.
+#
+AC_DEFUN([XORG_CHANGELOG], [
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+AC_SUBST([CHANGELOG_CMD])
+AC_SUBST([distcleancheck_listfiles], ['find . -type f ! -name ChangeLog -print'])
+]) # XORG_CHANGELOG
+
diff --git a/libfontenc/config.guess b/libfontenc/config.guess
index c38553dc7..f32079abd 100644
--- a/libfontenc/config.guess
+++ b/libfontenc/config.guess
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2006-02-23'
+timestamp='2008-01-23'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -55,8 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -160,6 +161,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -210,7 +212,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
 	exit ;;
     macppc:MirBSD:*:*)
-	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -328,7 +330,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:*)
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
@@ -530,7 +532,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[45])
+    *:AIX:*:[456])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -770,6 +772,8 @@ EOF
 	case ${UNAME_MACHINE} in
 	    pc98)
 		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	    *)
 		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	esac
@@ -777,10 +781,7 @@ EOF
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
-    i*:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit ;;
-    i*:MSYS_NT-*:*:*)
+    *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
     i*:windows32*:*)
@@ -790,12 +791,18 @@ EOF
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    x86:Interix*:[345]*)
-	echo i586-pc-interix${UNAME_RELEASE}
-	exit ;;
-    EM64T:Interix*:[345]*)
-	echo x86_64-unknown-interix${UNAME_RELEASE}
-	exit ;;
+    *:Interix*:[3456]*)
+    	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    EM64T | authenticamd)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
@@ -829,6 +836,16 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
@@ -947,6 +964,9 @@ EOF
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
 	exit ;;
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -989,7 +1009,7 @@ EOF
 	LIBC=gnulibc1
 	# endif
 	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun)
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
@@ -1205,6 +1225,15 @@ EOF
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
 	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1455,9 +1484,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be
diff --git a/libfontenc/config.h.in b/libfontenc/config.h.in
index 80cc9ddfb..aa95827da 100644
--- a/libfontenc/config.h.in
+++ b/libfontenc/config.h.in
@@ -33,6 +33,10 @@
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
 /* Name of package */
 #undef PACKAGE
 
diff --git a/libfontenc/config.sub b/libfontenc/config.sub
index ad9f39571..6759825a5 100644
--- a/libfontenc/config.sub
+++ b/libfontenc/config.sub
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2006-02-23'
+timestamp='2008-01-16'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -71,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -240,15 +241,16 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -274,21 +276,19 @@ case $basic_machine in
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b \
-	| strongarm \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
-	m32c)
-		basic_machine=$basic_machine-unknown
-		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -318,18 +318,18 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
+	| avr-* | avr32-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* | m32rle-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
 	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
@@ -358,22 +358,24 @@ case $basic_machine in
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-*)
 		;;
-	m32c-*)
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -445,6 +447,14 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
@@ -477,8 +487,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
-		basic_machine=cr16c-unknown
+	cr16)
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -670,6 +680,14 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -685,6 +703,10 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -811,6 +833,14 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -912,6 +942,10 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -923,6 +957,9 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@@ -1012,6 +1049,10 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1128,7 +1169,7 @@ case $basic_machine in
 	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1217,7 +1258,7 @@ case $os in
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1369,6 +1410,12 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1378,9 +1425,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-    c4x-* | tic4x-*)
-        os=-coff
-        ;;
+        c4x-* | tic4x-*)
+        	os=-coff
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1406,6 +1453,9 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;
diff --git a/libfontenc/configure b/libfontenc/configure
index f21e0ca2a..13748a4a6 100644
--- a/libfontenc/configure
+++ b/libfontenc/configure
@@ -1,30 +1,34 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.60 for libfontenc 1.0.4.
+# Generated by GNU Autoconf 2.63 for libfontenc 1.0.5.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
 fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
+
+
 
 
 # PATH needs CR
@@ -35,17 +39,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -61,8 +93,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -85,7 +115,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -98,17 +128,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -130,7 +153,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
 	    s//\1/
 	    q
@@ -156,7 +179,7 @@ else
   as_have_required=no
 fi
 
-  if test $as_have_required = yes && 	 (eval ":
+  if test $as_have_required = yes &&	 (eval ":
 (as_func_return () {
   (exit \$1)
 }
@@ -217,7 +240,7 @@ test \$exitcode = 0) || { (exit 1); exit 1; }
 else
   as_candidate_shells=
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
@@ -235,19 +258,20 @@ IFS=$as_save_IFS
 	 # Try only shells that exist, to save several forks.
 	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
 		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
 fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
+
 
 :
 _ASEOF
@@ -255,19 +279,20 @@ _ASEOF
   CONFIG_SHELL=$as_shell
 	       as_have_required=yes
 	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
 fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
+
 
 :
 (as_func_return () {
@@ -337,10 +362,10 @@ fi
 
       if test "x$CONFIG_SHELL" != x; then
   for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+	done
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
 
@@ -409,9 +434,10 @@ fi
 
 test \$exitcode = 0") || {
   echo No shell found that supports shell functions.
-  echo Please tell autoconf@gnu.org about your system,
-  echo including any error possibly output before this
-  echo message
+  echo Please tell bug-autoconf@gnu.org about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
 }
 
 
@@ -447,7 +473,7 @@ test \$exitcode = 0") || {
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -475,7 +501,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -488,19 +513,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -514,19 +542,28 @@ else
   as_mkdir_p=false
 fi
 
-# Find out whether ``test -x'' works.  Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
-  as_executable_p="test -x"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
 else
-  as_executable_p=:
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
 fi
-rm -f conf$$.file
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -540,22 +577,22 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -565,9 +602,9 @@ fi
 if test "X$1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 $*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -575,121 +612,116 @@ fi
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
       else
-	# maybe with a smaller string...
-	prev=:
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "$0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
 fi
 
 
 
 
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
 exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
@@ -713,179 +745,195 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='libfontenc'
 PACKAGE_TARNAME='libfontenc'
-PACKAGE_VERSION='1.0.4'
-PACKAGE_STRING='libfontenc 1.0.4'
+PACKAGE_VERSION='1.0.5'
+PACKAGE_STRING='libfontenc 1.0.5'
 PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
 
 # Factoring default headers for most tests.
 ac_includes_default="\
 #include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
 # include <sys/types.h>
 #endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
 # include <sys/stat.h>
 #endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
 # include <stdlib.h>
 # include <stddef.h>
 #else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
 #  include <stdlib.h>
 # endif
 #endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
 #  include <memory.h>
 # endif
 # include <string.h>
 #endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
 # include <strings.h>
 #endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
 # include <inttypes.h>
 #endif
-#if HAVE_STDINT_H
+#ifdef HAVE_STDINT_H
 # include <stdint.h>
 #endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_UNISTD_H
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-AMSHOWCMDSAT
-AMDEPSHOWCMDSAT
-AMPRETTYECHO
-AMCMDECHO
-LT_QUIET
-MAINTAINER_MODE_TRUE
-MAINTAINER_MODE_FALSE
-MAINT
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-GREP
-EGREP
-LN_S
-ECHO
-AR
-RANLIB
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+distcleancheck_listfiles
+CHANGELOG_CMD
+LINT_FALSE
+LINT_TRUE
+LINT_FLAGS
+LINT
+FONTENC_LIBS
+FONTENC_CFLAGS
+PKG_CONFIG
+ENCODINGSDIR
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+CWARNFLAGS
 CPP
-CXX
-CXXFLAGS
-ac_ct_CXX
-CXXDEPMODE
-am__fastdepCXX_TRUE
-am__fastdepCXX_FALSE
-CXXCPP
-F77
-FFLAGS
-ac_ct_F77
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+lt_ECHO
+RANLIB
+AR
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
 LIBTOOL
-ENCODINGSDIR
-PKG_CONFIG
-FONTENC_CFLAGS
-FONTENC_LIBS
-LINT
-LINT_FLAGS
-LINT_TRUE
-LINT_FALSE
-LIBOBJS
-LTLIBOBJS'
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+enable_libtool_lock
+enable_silent_rules
+with_encodingsdir
+with_lint
+with_release_version
+'
       ac_precious_vars='build_alias
 host_alias
 target_alias
 CC
 CFLAGS
 LDFLAGS
+LIBS
 CPPFLAGS
 CPP
-CXX
-CXXFLAGS
-CCC
-CXXCPP
-F77
-FFLAGS
 PKG_CONFIG
 FONTENC_CFLAGS
 FONTENC_LIBS'
@@ -894,6 +942,8 @@ FONTENC_LIBS'
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -992,13 +1042,21 @@ do
     datarootdir=$ac_optarg ;;
 
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval enable_$ac_feature=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
 
   -docdir | --docdir | --docdi | --doc | --do)
     ac_prev=docdir ;;
@@ -1011,13 +1069,21 @@ do
     dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -1208,22 +1274,38 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval with_$ac_package=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -1243,7 +1325,7 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; }
     ;;
@@ -1252,16 +1334,16 @@ Try \`$0 --help' for more information." >&2
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
@@ -1270,22 +1352,38 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute directory names.
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
 		libdir localedir mandir
 do
   eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
   case $ac_val in
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
    { (exit 1); exit 1; }; }
 done
 
@@ -1300,7 +1398,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -1316,10 +1414,10 @@ test "$silent" = yes && exec 6>/dev/null
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
+  { $as_echo "$as_me: error: working directory cannot be determined" >&2
    { (exit 1); exit 1; }; }
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
    { (exit 1); exit 1; }; }
 
 
@@ -1327,12 +1425,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
   # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -1359,12 +1457,12 @@ else
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
    { (exit 1); exit 1; }; }
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
    { (exit 1); exit 1; }; }
 	pwd)`
 # When building in place, set srcdir=.
@@ -1391,7 +1489,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libfontenc 1.0.4 to adapt to many kinds of systems.
+\`configure' configures libfontenc 1.0.5 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1413,9 +1511,9 @@ Configuration:
 
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -1425,25 +1523,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/libfontenc]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/libfontenc]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1461,15 +1559,14 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libfontenc 1.0.4:";;
+     short | recursive ) echo "Configuration of libfontenc 1.0.5:";;
    esac
   cat <<\_ACEOF
 
 Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --disable-pretty-cmds          show all commands executed
-  --enable-pretty-cmds           do not output the entire command lines
   --enable-maintainer-mode  enable make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer
   --disable-dependency-tracking  speeds up one-time build
@@ -1479,15 +1576,16 @@ Optional Features:
   --enable-fast-install[=PKGS]
                           optimize for fast installation [default=yes]
   --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-silent-rules          less verbose build output (undo: `make V=1')
+  --disable-silent-rules         verbose build output (undo: `make V=0')
 
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
-  --with-tags[=TAGS]      include additional configurations [automatic]
-  --with-encodingsdir=ENCODINGSDIR
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-encodingsdir=<pathname>
                           Path to font encodings
   --with-lint             Use a lint-style source code checker (default:
                           disabled)
@@ -1499,14 +1597,10 @@ Some influential environment variables:
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
   CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
               you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor
-  CXX         C++ compiler command
-  CXXFLAGS    C++ compiler flags
-  CXXCPP      C++ preprocessor
-  F77         Fortran 77 compiler command
-  FFLAGS      Fortran 77 compiler flags
   PKG_CONFIG  path to pkg-config utility
   FONTENC_CFLAGS
               C compiler flags for FONTENC, overriding pkg-config
@@ -1524,15 +1618,17 @@ fi
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -1568,7 +1664,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
       echo &&
       $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi || ac_status=$?
     cd "$ac_pwd" || { ac_status=$?; break; }
   done
@@ -1577,11 +1673,11 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libfontenc configure 1.0.4
-generated by GNU Autoconf 2.60
+libfontenc configure 1.0.5
+generated by GNU Autoconf 2.63
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1591,8 +1687,8 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libfontenc $as_me 1.0.4, which was
-generated by GNU Autoconf 2.60.  Invocation command line was
+It was created by libfontenc $as_me 1.0.5, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   $ $0 $@
 
@@ -1628,7 +1724,7 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
+  $as_echo "PATH: $as_dir"
 done
 IFS=$as_save_IFS
 
@@ -1663,7 +1759,7 @@ do
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
     *\'*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
     1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -1715,11 +1811,12 @@ _ASBOX
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -1749,9 +1846,9 @@ _ASBOX
     do
       eval ac_val=\$$ac_var
       case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
       esac
-      echo "$ac_var='\''$ac_val'\''"
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
@@ -1766,9 +1863,9 @@ _ASBOX
       do
 	eval ac_val=\$$ac_var
 	case $ac_val in
-	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
 	esac
-	echo "$ac_var='\''$ac_val'\''"
+	$as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1784,8 +1881,8 @@ _ASBOX
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
   rm -f core *.core core.conftest.* &&
     rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
@@ -1827,21 +1924,24 @@ _ACEOF
 
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
+  ac_site_file1=$CONFIG_SITE
 elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
 else
-  set x "$ac_default_prefix/share/config.site" \
-	"$ac_default_prefix/etc/config.site"
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-shift
-for ac_site_file
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1851,16 +1951,16 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
       [\\/]* | ?:[\\/]* ) . "$cache_file";;
       *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
@@ -1874,29 +1974,38 @@ for ac_var in $ac_precious_vars; do
   eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1906,10 +2015,12 @@ echo "$as_me:   current value: $ac_new_val" >&2;}
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1944,7 +2055,8 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-am__api_version="1.9"
+am__api_version='1.11'
+
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
   if test -f "$ac_dir/install-sh"; then
@@ -1962,8 +2074,8 @@ for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1989,11 +2101,12 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -2012,7 +2125,7 @@ case $as_dir/ in
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -2022,17 +2135,29 @@ case $as_dir/ in
 	    # program-specific install script used by HP pwplus--don't use.
 	    :
 	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
     done
     ;;
 esac
+
 done
 IFS=$as_save_IFS
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
@@ -2045,8 +2170,8 @@ fi
     INSTALL=$ac_install_sh
   fi
 fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -2056,21 +2181,38 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$*" != "X $srcdir/configure conftest.file" \
@@ -2080,9 +2222,9 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&2;}
    { (exit 1); exit 1; }; }
    fi
@@ -2093,81 +2235,209 @@ then
    # Ok.
    :
 else
-   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
 Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
   program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
   else
-    mkdir_p='$(install_sh) -d'
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
   fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if test "${ac_cv_path_mkdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+done
+IFS=$as_save_IFS
+
 fi
 
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    test -d ./--version && rmdir ./--version
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
   ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -2178,9 +2448,9 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2191,22 +2461,23 @@ fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
   test -n "$AWK" && break
 done
 
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
 if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
 SHELL = /bin/sh
@@ -2223,12 +2494,12 @@ esac
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -2241,35 +2512,16 @@ else
 fi
 rmdir .tst 2>/dev/null
 
-# Check whether --enable-pretty-cmds was given.
-if test "${enable_pretty_cmds+set}" = set; then
-  enableval=$enable_pretty_cmds;
-fi
-
-AMSHOWCMDSAT=''
-AMDEPSHOWCMDSAT=''
-AMPRETTYECHO=true
-AMCMDECHO=echo
-if test "x$enable_pretty_cmds" = xyes;
-then
-  AMSHOWCMDSAT='@'
-  test "x$enable_dependency_tracking" = xno && AMDEPSHOWCMDSAT='@'
-  AMPRETTYECHO=echo
-  AMCMDECHO=true
-  LT_QUIET='--quiet'
-fi
-
-
-
-
-
-
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
    { (exit 1); exit 1; }; }
+  fi
 fi
 
 # test whether we have cygpath
@@ -2284,7 +2536,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='libfontenc'
- VERSION='1.0.4'
+ VERSION='1.0.5'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2312,112 +2564,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 # Always define AMTAR for backward compatibility.
@@ -2431,8 +2577,8 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
 
 
-{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
     # Check whether --enable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
@@ -2440,11 +2586,9 @@ else
   USE_MAINTAINER_MODE=no
 fi
 
-  { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
-
-
-if test $USE_MAINTAINER_MODE = yes; then
+  { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+   if test $USE_MAINTAINER_MODE = yes; then
   MAINTAINER_MODE_TRUE=
   MAINTAINER_MODE_FALSE='#'
 else
@@ -2456,32 +2600,19 @@ fi
 
 
 
-ac_config_headers="$ac_config_headers config.h"
+# Require xorg-macros: XORG_CWARNFLAGS, XORG_CHANGELOG, XORG_WITH_LINT
+
+
+
+
+
 
 
-# Require xorg-macros version 1.1.0 or newer for XORG_WITH_LINT macro
 
 
-	XORG_MACROS_needed_version=1.1
-	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
-	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
-	{ echo "$as_me:$LINENO: checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}" >&5
-echo $ECHO_N "checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}... $ECHO_C" >&6; }
-	XORG_MACROS_version=1.1.3
-	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
-	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
-	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
-		{ { echo "$as_me:$LINENO: error: configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" >&5
-echo "$as_me: error: configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" >&2;}
-   { (exit 1); exit 1; }; }
-	fi
-	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
-		{ { echo "$as_me:$LINENO: error: configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" >&5
-echo "$as_me: error: configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" >&2;}
-   { (exit 1); exit 1; }; }
-	fi
-	{ echo "$as_me:$LINENO: result: yes, $XORG_MACROS_version" >&5
-echo "${ECHO_T}yes, $XORG_MACROS_version" >&6; }
+
+
+ac_config_headers="$ac_config_headers config.h"
 
 
 # Check for progs
@@ -2493,10 +2624,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2507,9 +2638,9 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2520,11 +2651,11 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2533,10 +2664,10 @@ if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -2547,9 +2678,9 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2560,11 +2691,11 @@ fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
   if test "x$ac_ct_CC" = x; then
@@ -2572,12 +2703,8 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
     CC=$ac_ct_CC
@@ -2590,10 +2717,10 @@ if test -z "$CC"; then
           if test -n "$ac_tool_prefix"; then
     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2604,9 +2731,9 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2617,11 +2744,11 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2630,10 +2757,10 @@ fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2645,13 +2772,13 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
      fi
     ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2674,11 +2801,11 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2689,10 +2816,10 @@ if test -z "$CC"; then
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2703,9 +2830,9 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2716,11 +2843,11 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2733,10 +2860,10 @@ if test -z "$CC"; then
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -2747,9 +2874,9 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2760,11 +2887,11 @@ fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2776,12 +2903,8 @@ done
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
     CC=$ac_ct_CC
@@ -2791,44 +2914,50 @@ fi
 fi
 
 
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
 See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
+$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
+$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
 { (ac_try="$ac_compiler --version >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 { (ac_try="$ac_compiler -v >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 { (ac_try="$ac_compiler -V >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 
 cat >conftest.$ac_ext <<_ACEOF
@@ -2847,27 +2976,22 @@ main ()
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort.  b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions.  Remove them first so a
-# subsequent execution test works.
+{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
 ac_rmfiles=
 for ac_file in $ac_files
 do
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
     * ) ac_rmfiles="$ac_rmfiles $ac_file";;
   esac
 done
@@ -2878,21 +3002,22 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link_default") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
 # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
 # in a Makefile.  We should not override ac_cv_exeext if it was cached,
 # so that the user can short-circuit this test for compilers unknown to
 # Autoconf.
-for ac_file in $ac_files
+for ac_file in $ac_files ''
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
@@ -2916,24 +3041,30 @@ done
 test "$ac_cv_exeext" = no && ac_cv_exeext=
 
 else
-  echo "$as_me: failed program was:" >&5
+  ac_file=''
+fi
+
+{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+if test -z "$ac_file"; then
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
 See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
+$as_echo "$as_me: error: C compiler cannot create executables
 See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }
+   { (exit 77); exit 77; }; }; }
 fi
 
 ac_exeext=$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
 
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
@@ -2942,49 +3073,53 @@ if test "$cross_compiling" != yes; then
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
     cross_compiling=no
   else
     if test "$cross_compiling" = maybe; then
 	cross_compiling=yes
     else
-	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
+$as_echo "$as_me: error: cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
     fi
   fi
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
 
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
 if { (ac_try="$ac_link"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   # If both `conftest.exe' and `conftest' are `present' (well, observable)
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
@@ -2993,31 +3128,33 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
 	  break;;
     * ) break;;
   esac
 done
 else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 fi
 
 rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
 if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -3040,40 +3177,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   for ac_file in conftest.o conftest.obj conftest.*; do
   test -f "$ac_file" || continue;
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
 done
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
 See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
+$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 fi
 
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -3099,37 +3239,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_compiler_gnu=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_compiler_gnu=no
@@ -3139,15 +3263,19 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
    ac_c_werror_flag=yes
@@ -3174,37 +3302,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	CFLAGS=""
@@ -3229,37 +3341,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   :
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_c_werror_flag=$ac_save_c_werror_flag
@@ -3285,37 +3381,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 
@@ -3330,8 +3410,8 @@ fi
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -3347,10 +3427,10 @@ else
     CFLAGS=
   fi
 fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
 if test "${ac_cv_prog_cc_c89+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
@@ -3421,37 +3501,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_c89=$ac_arg
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 
@@ -3467,15 +3531,15 @@ fi
 # AC_CACHE_VAL
 case "x$ac_cv_prog_cc_c89" in
   x)
-    { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
+    { $as_echo "$as_me:$LINENO: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
   xno)
-    { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
+    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
   *)
     CC="$CC $ac_cv_prog_cc_c89"
-    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
 esac
 
 
@@ -3492,40 +3556,40 @@ ac_config_commands="$ac_config_commands depfiles"
 am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
 am__include="#"
 am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 
 
-{ echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
 rm -f confinc confmf
 
 # Check whether --enable-dependency-tracking was given.
@@ -3537,9 +3601,7 @@ if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
 fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
+ if test "x$enable_dependency_tracking" != xno; then
   AMDEP_TRUE=
   AMDEP_FALSE='#'
 else
@@ -3549,13 +3611,12 @@ fi
 
 
 
-
 depcc="$CC"   am_compiler_list=
 
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
   # We make a subdir and do the tests there.  Otherwise we can end up
@@ -3580,6 +3641,11 @@ else
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -3597,7 +3663,17 @@ else
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -3607,18 +3683,23 @@ else
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -3642,13 +3723,11 @@ else
 fi
 
 fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
-
-
-if
+ if
   test "x$enable_dependency_tracking" != xno \
   && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
   am__fastdepCC_TRUE=
@@ -3659,108 +3738,61 @@ else
 fi
 
 
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval=$enable_shared; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_shared=yes
-fi
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.6'
+macro_revision='1.3012'
 
 
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval=$enable_static; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_static=yes
-fi
 
 
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval=$enable_fast_install; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_fast_install=yes
-fi
 
 
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
    { (exit 1); exit 1; }; }
 
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
 if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
    { (exit 1); exit 1; }; }
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
    { (exit 1); exit 1; }; }
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+$as_echo "$as_me: error: invalid value of canonical build" >&2;}
    { (exit 1); exit 1; }; };;
 esac
 build=$ac_cv_build
@@ -3777,27 +3809,27 @@ IFS=$ac_save_IFS
 case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
 if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+$as_echo "$as_me: error: invalid value of canonical host" >&2;}
    { (exit 1); exit 1; }; };;
 esac
 host=$ac_cv_host
@@ -3814,99 +3846,121 @@ IFS=$ac_save_IFS
 case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
-{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${ac_cv_path_SED+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     $as_unset ac_script || ac_script=
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
+  for ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
     done
   done
 done
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5
+$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
   fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
+else
+  ac_cv_path_SED=$SED
+fi
 
 fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
 
-SED=$lt_cv_path_SED
-{ echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6; }
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
 
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
 if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
+  if test -z "$GREP"; then
   ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_prog in grep ggrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue
-    # Check for GNU ac_path_GREP and select it if it is found.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
 *GNU*)
   ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
 *)
   ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  $as_echo_n 0123456789 >"conftest.in"
   while :
   do
     cat "conftest.in" "conftest.in" >"conftest.tmp"
     mv "conftest.tmp" "conftest.in"
     cp "conftest.in" "conftest.nl"
-    echo 'GREP' >> "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
     "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
@@ -3921,74 +3975,60 @@ case `"$ac_path_GREP" --version 2>&1` in
   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
-
-    $ac_path_GREP_found && break 3
+      $ac_path_GREP_found && break 3
+    done
   done
 done
-
-done
 IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+  if test -z "$ac_cv_path_GREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
    { (exit 1); exit 1; }; }
-fi
-
+  fi
 else
   ac_cv_path_GREP=$GREP
 fi
 
-
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
  GREP="$ac_cv_path_GREP"
 
 
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
 if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
    then ac_cv_path_EGREP="$GREP -E"
    else
-     # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
+     if test -z "$EGREP"; then
   ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_prog in egrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue
-    # Check for GNU ac_path_EGREP and select it if it is found.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
 *GNU*)
   ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
 *)
   ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  $as_echo_n 0123456789 >"conftest.in"
   while :
   do
     cat "conftest.in" "conftest.in" >"conftest.tmp"
     mv "conftest.tmp" "conftest.in"
     cp "conftest.in" "conftest.nl"
-    echo 'EGREP' >> "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
     "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
@@ -4003,34 +4043,113 @@ case `"$ac_path_EGREP" --version 2>&1` in
   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
-
-    $ac_path_EGREP_found && break 3
+      $ac_path_EGREP_found && break 3
+    done
   done
 done
-
-done
 IFS=$as_save_IFS
-
-
+  if test -z "$ac_cv_path_EGREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
 fi
 
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
+   fi
 fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
 
+{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_path_EGREP=$EGREP
-fi
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
 
+      $ac_path_FGREP_found && break 3
+    done
+  done
+done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
 
    fi
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 
 
 
@@ -4044,8 +4163,8 @@ fi
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -4058,9 +4177,9 @@ echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
     [\\/]* | ?:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -4074,14 +4193,14 @@ echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
 else
-  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
 fi
 if test "${lt_cv_path_LD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
@@ -4111,19 +4230,19 @@ fi
 
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $LD" >&5
+$as_echo "$LD" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   # I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
@@ -4135,40 +4254,22 @@ case `$LD -v 2>&1 </dev/null` in
   ;;
 esac
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
-{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
 
-{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
 if test "${lt_cv_path_NM+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
   # Let the user override the test.
@@ -4211,28 +4312,493 @@ else
     done
     IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
 fi
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
 
-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:4443: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:4446: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:4449: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
 LN_S=$as_ln_s
 if test "$LN_S" = "ln -s"; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
 fi
 
-{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; }
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
 if test "${lt_cv_deplibs_check_method+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -4249,7 +4815,7 @@ lt_cv_deplibs_check_method='unknown'
 # whether `pass_all' will *always* work, you probably want this one.
 
 case $host_os in
-aix4* | aix5*)
+aix[4-9]*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -4271,8 +4837,20 @@ cygwin*)
 
 mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
   ;;
 
@@ -4281,7 +4859,7 @@ darwin* | rhapsody*)
   ;;
 
 freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
@@ -4318,7 +4896,7 @@ hpux10.20* | hpux11*)
   esac
   ;;
 
-interix3*)
+interix[3-9]*)
   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
   lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
   ;;
@@ -4338,8 +4916,8 @@ linux* | k*bsd*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd* | netbsdelf*-gnu)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
@@ -4352,12 +4930,12 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -4368,10 +4946,18 @@ osf3* | osf4* | osf5*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
@@ -4399,14 +4985,14 @@ sysv4 | sysv4.3*)
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -4414,6 +5000,367 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
 
 
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:$LINENO: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="ar"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -4424,6 +5371,256 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 compiler=$CC
 
 
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+const struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:$LINENO: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
   enableval=$enable_libtool_lock;
@@ -4440,97 +5637,104 @@ ia64-*-hpux*)
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
     case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 4458 "configure"' > conftest.$ac_ext
+  echo '#line 5655 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
   fi
   rm -rf conftest*
   ;;
 
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
     case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
     esac
   fi
   rm -rf conftest*
@@ -4540,10 +5744,10 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
-  { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
 if test "${lt_cv_cc_needs_belf+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -4572,43 +5776,31 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   lt_cv_cc_needs_belf=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	lt_cv_cc_needs_belf=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
      ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -4617,8 +5809,8 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
@@ -4630,40 +5822,655 @@ sparc*-*solaris*)
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
     case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
       esac
       ;;
     esac
   fi
   rm -rf conftest*
   ;;
+esac
+
+need_locks="$enable_libtool_lock"
 
 
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
 esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:$LINENO: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL64+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 
-need_locks="$enable_libtool_lock"
 
 
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  lt_cv_ld_exported_symbols_list=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	lt_cv_ld_exported_symbols_list=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
   if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
     for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
@@ -4695,27 +6502,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   :
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
   # Broken: fails on valid input.
@@ -4739,28 +6540,22 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   # Broken: success on invalid input.
 continue
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
   # Passes both tests.
@@ -4785,8 +6580,8 @@ fi
 else
   ac_cv_prog_CPP=$CPP
 fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
 do
@@ -4814,27 +6609,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   :
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
   # Broken: fails on valid input.
@@ -4858,28 +6647,22 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   # Broken: success on invalid input.
 continue
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
   # Passes both tests.
@@ -4895,11 +6678,13 @@ rm -f conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then
   :
 else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
 See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 fi
 
 ac_ext=c
@@ -4909,10 +6694,10 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
 if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -4939,37 +6724,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_header_stdc=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_header_stdc=no
@@ -5061,37 +6830,40 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
   { (case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
   :
 else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
+rm -rf conftest.dSYM
 rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 
 
 fi
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -5113,11 +6885,11 @@ fi
 for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
 		  inttypes.h stdint.h unistd.h
 do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
 if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -5135,37 +6907,21 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   eval "$as_ac_Header=yes"
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	eval "$as_ac_Header=no"
@@ -5173,12 +6929,15 @@ fi
 
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+   if test "x$as_val" = x""yes; then
   cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
 
 fi
@@ -5189,27 +6948,20 @@ done
 
 for ac_header in dlfcn.h
 do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
 if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+  $as_echo_n "(cached) " >&6
 else
-  # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
+  cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
@@ -5218,1595 +6970,254 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  eval "$as_ac_Header=yes"
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_header_compiler=no
+	eval "$as_ac_Header=no"
 fi
 
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
 fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_Header'}
+		 $as_echo "$as_val"'`
+   if test "x$as_val" = x""yes; then
   cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
 
 fi
 
 done
 
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
-  if test -n "$CCC"; then
-    CXX=$CCC
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
-  { echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
 
-    test -n "$CXX" && break
-  done
-fi
-if test -z "$CXX"; then
-  ac_ct_CXX=$CXX
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CXX"; then
-  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CXX="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
+# Set options
 
 
-  test -n "$ac_ct_CXX" && break
-done
 
-  if test "x$ac_ct_CXX" = x; then
-    CXX="g++"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    CXX=$ac_ct_CXX
-  fi
-fi
+        enable_dlopen=no
 
-  fi
-fi
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
 
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+  enable_win32_dll=no
 
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
+  enable_shared=yes
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-GXX=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-   ac_cxx_werror_flag=yes
-   ac_cv_prog_cxx_g=no
-   CXXFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cxx_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	CXXFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-	 CXXFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cxx_g=yes
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  enable_static=yes
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-depcc="$CXX"  am_compiler_list=
 
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
 
-  am_cv_CXX_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CXX_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
 
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CXX_dependencies_compiler_type=none
-fi
 
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
 
 
-if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
-  am__fastdepCXX_TRUE=
-  am__fastdepCXX_FALSE='#'
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then
+  withval=$with_pic; pic_mode="$withval"
 else
-  am__fastdepCXX_TRUE='#'
-  am__fastdepCXX_FALSE=
+  pic_mode=default
 fi
 
 
+test -z "$pic_mode" && pic_mode=default
 
 
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-if test -z "$CXXCPP"; then
-  if test "${ac_cv_prog_CXXCPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CXXCPP needs to be expanded
-    for CXXCPP in "$CXX -E" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_cxx_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_cxx_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
 
-    done
-    ac_cv_prog_CXXCPP=$CXXCPP
 
-fi
-  CXXCPP=$ac_cv_prog_CXXCPP
-else
-  ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-echo "${ECHO_T}$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_cxx_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-  else
-    ac_cpp_err=
-  fi
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  ac_cpp_err=yes
+  enable_fast_install=yes
 fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-  # Broken: fails on valid input.
-continue
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_cxx_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
 
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-fi
 
 
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$F77"; then
-  ac_cv_prog_F77="$F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
-  { echo "$as_me:$LINENO: result: $F77" >&5
-echo "${ECHO_T}$F77" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
 
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
-    test -n "$F77" && break
-  done
-fi
-if test -z "$F77"; then
-  ac_ct_F77=$F77
-  for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_F77"; then
-  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_F77="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-echo "${ECHO_T}$ac_ct_F77" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
 
 
-  test -n "$ac_ct_F77" && break
-done
 
-  if test "x$ac_ct_F77" = x; then
-    F77=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    F77=$ac_ct_F77
-  fi
-fi
 
 
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-rm -f a.out
 
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file.  (Note that this only needs to work for GNU compilers.)
-ac_save_ext=$ac_ext
-ac_ext=F
-{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-      program main
-#ifndef __GNUC__
-       choke me
-#endif
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_compiler_gnu=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
 
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
-ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  FFLAGS=-g
-cat >conftest.$ac_ext <<_ACEOF
-      program main
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_f77_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_prog_f77_g=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
-if test "$ac_test_FFLAGS" = set; then
-  FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-g -O2"
-  else
-    FFLAGS="-g"
-  fi
-else
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-O2"
-  else
-    FFLAGS=
-  fi
-fi
 
-G77=`test $ac_compiler_gnu = yes && echo yes`
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
 
-# find the maximum length of command line arguments
-{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-    i=0
-  teststring="ABCD"
 
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
 
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
 
-  cygwin* | mingw*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
 
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
+test -z "$LN_S" && LN_S="ln -s"
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
 
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
 
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      teststring=$teststring$teststring
-    done
-    teststring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    ;;
-  esac
 
-fi
 
-if test -n $lt_cv_sys_max_cmd_len ; then
-  { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-else
-  { echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6; }
-fi
 
 
 
 
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
 
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
 
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDGIRSTW]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
-  ;;
-osf*)
-  symcode='[BCDEGQRST]'
-  ;;
-solaris*)
-  symcode='[BDRT]'
-  ;;
-sco3.2v5*)
-  symcode='[DT]'
-  ;;
-sysv4.2uw2*)
-  symcode='[DT]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[ABDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
+{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if test "${lt_cv_objdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
 
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[ABCDGIRSTW]' ;;
-esac
 
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
 
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
 
-  # Check to see that the pipe works correctly.
-  pipe_works=no
 
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
 
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
 
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
 
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
 
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
 
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
 
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
 
-fi
 
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6; }
-else
-  { echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6; }
-fi
 
-{ echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-if test "${lt_cv_objdir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
 
 
 
@@ -6826,360 +7237,41 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
-
 # Global variables:
-default_ofile=libtool
+ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AR="ar"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
 
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
 for cc_temp in $compiler""; do
   case $cc_temp in
     compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
@@ -7188,17 +7280,18 @@ for cc_temp in $compiler""; do
     *) break;;
   esac
 done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
 # Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
@@ -7222,7 +7315,7 @@ else
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -7233,7 +7326,7 @@ else
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -7248,19 +7341,23 @@ fi
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
+
+
+
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    { echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
@@ -7284,7 +7381,7 @@ else
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -7295,7 +7392,7 @@ else
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -7310,13 +7407,14 @@ fi
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
   else
     MAGIC_CMD=:
   fi
@@ -7326,28 +7424,8 @@ fi
   ;;
 esac
 
-enable_dlopen=no
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
-  withval=$with_pic; pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test -z "$pic_mode" && pic_mode=default
-
 # Use C for the default configuration in the libtool script
-tagname=
+
 lt_save_CC="$CC"
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -7364,10 +7442,15 @@ objext=o
 objext=$objext
 
 # Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
+lt_simple_compile_test_code="int some_variable = 0;"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
 
 
 # If no C compiler was specified, use CC.
@@ -7379,36 +7462,39 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
 
 # save warnings/boilerplate of simple test code
 ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 
 ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM -r conftest*
 
 
+if test -n "$compiler"; then
 
 lt_prog_compiler_no_builtin_flag=
 
 if test "$GCC" = yes; then
   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="-fno-rtti -fno-exceptions"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -7419,25 +7505,25 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7422: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7508: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7426: \$? = $ac_status" >&5
+   echo "$as_me:7512: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
 if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
@@ -7447,12 +7533,17 @@ fi
 
 fi
 
-lt_prog_compiler_wl=
+
+
+
+
+
+  lt_prog_compiler_wl=
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl='-Wl,'
@@ -7468,19 +7559,29 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
       ;;
 
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
 
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
       lt_prog_compiler_pic='-DDLL_EXPORT'
       ;;
 
@@ -7490,7 +7591,21 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
       lt_prog_compiler_pic='-fno-common'
       ;;
 
-    interix3*)
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -7502,25 +7617,18 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
       enable_shared=no
       ;;
 
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
     sysv4*MP*)
       if test -d /usr/nec; then
 	lt_prog_compiler_pic=-Kconform_pic
       fi
       ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='-fPIC'
-	;;
-      esac
-      ;;
-
     *)
       lt_prog_compiler_pic='-fPIC'
       ;;
@@ -7537,18 +7645,8 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic='-qnocommon'
-         lt_prog_compiler_wl='-Wl,'
-         ;;
-       esac
-       ;;
 
-    mingw* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic='-DDLL_EXPORT'
@@ -7576,18 +7674,27 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
     linux* | k*bsd*-gnu)
       case $cc_basename in
-      icc* | ecc*)
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
 	lt_prog_compiler_static='-static'
         ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -7600,15 +7707,52 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
         # All Alpha code is PIC.
         lt_prog_compiler_static='-non_shared'
         ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	esac
+	;;
       esac
       ;;
 
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
     osf3* | osf4* | osf5*)
       lt_prog_compiler_wl='-Wl,'
       # All OSF/1 code is PIC.
       lt_prog_compiler_static='-non_shared'
       ;;
 
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
     solaris*)
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
@@ -7661,22 +7805,35 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
     esac
   fi
 
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
+
+
+
+
+
 
 #
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+  { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -7687,27 +7844,27 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7690: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7847: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7694: \$? = $ac_status" >&5
+   echo "$as_me:7851: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works=yes
+       lt_cv_prog_compiler_pic_works=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
-if test x"$lt_prog_compiler_pic_works" = xyes; then
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
     case $lt_prog_compiler_pic in
      "" | " "*) ;;
      *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -7718,69 +7875,70 @@ else
 fi
 
 fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
+
+
+
+
+
 
 #
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  lt_prog_compiler_static_works=no
+  lt_cv_prog_compiler_static_works=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
      # The linker can only warn and ignore the option if not recognized
      # So say no if there are warnings
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works=yes
+         lt_cv_prog_compiler_static_works=yes
        fi
      else
-       lt_prog_compiler_static_works=yes
+       lt_cv_prog_compiler_static_works=yes
      fi
    fi
-   $rm conftest*
+   $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
-if test x"$lt_prog_compiler_static_works" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
     :
 else
     lt_prog_compiler_static=
 fi
 
 
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
-   $rm -r conftest 2>/dev/null
+   $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -7791,83 +7949,148 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7794: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7952: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7798: \$? = $ac_status" >&5
+   echo "$as_me:7956: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
      fi
    fi
    chmod u+w . 2>&5
-   $rm conftest*
+   $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
    cd ..
-   rmdir conftest
-   $rm conftest*
+   $RM -r conftest
+   $RM conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:8007: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:8011: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
 
 
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
   hard_links=yes
-  $rm conftest*
+  $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
   if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
   need_locks=no
 fi
 
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
   runpath_var=
   allow_undefined_flag=
-  enable_shared_with_static_runtimes=no
+  always_export_symbols=no
   archive_cmds=
   archive_expsym_cmds=
-  old_archive_From_new_cmds=
-  old_archive_from_expsyms_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
   export_dynamic_flag_spec=
-  whole_archive_flag_spec=
-  thread_safe_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
   hardcode_libdir_flag_spec=
   hardcode_libdir_flag_spec_ld=
   hardcode_libdir_separator=
-  hardcode_direct=no
   hardcode_minus_L=no
   hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
   link_all_deplibs=unknown
-  hardcode_automatic=no
   module_cmds=
   module_expsym_cmds=
-  always_export_symbols=no
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
   # include_expsyms should be a list of space-separated symbols to be *always*
   # included in the symbol list
   include_expsyms=
@@ -7875,26 +8098,17 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
   extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
-  cygwin* | mingw* | pw32*)
+  cygwin* | mingw* | pw32* | cegcc*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
@@ -7920,16 +8134,16 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
     export_dynamic_flag_spec='${wl}--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec=
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
+    case `$LD -v 2>&1` in
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -7939,11 +8153,11 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	ld_shlibs=no
-	cat <<EOF 1>&2
+	cat <<_LT_EOF 1>&2
 
 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
@@ -7951,26 +8165,27 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 *** really care for shared libraries, you may want to modify your PATH
 *** so that a non-GNU linker is found, and then restart.
 
-EOF
+_LT_EOF
       fi
       ;;
 
     amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
       ;;
 
     beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	allow_undefined_flag=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
@@ -7980,16 +8195,16 @@ EOF
       fi
       ;;
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
@@ -8005,7 +8220,7 @@ EOF
       fi
       ;;
 
-    interix3*)
+    interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
       hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
@@ -8020,40 +8235,78 @@ EOF
       archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
 	tmp_addflag=
+	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
 	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
 	  tmp_addflag=' -i_dynamic -nofor_main' ;;
 	ifc* | ifort*)			# Intel Fortran compiler
 	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
 	esac
-	archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs=no
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec=
+	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
       else
-	ld_shlibs=no
+        ld_shlibs=no
       fi
       ;;
 
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
@@ -8063,9 +8316,9 @@ EOF
       ;;
 
     solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
 	ld_shlibs=no
-	cat <<EOF 1>&2
+	cat <<_LT_EOF 1>&2
 
 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
 *** create shared libraries on Solaris systems.  Therefore, libtool
@@ -8074,8 +8327,8 @@ EOF
 *** your PATH or compiler configuration so that the native linker is
 *** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
@@ -8099,10 +8352,14 @@ EOF
 _LT_EOF
 	;;
 	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    ld_shlibs=no
 	  fi
@@ -8118,7 +8375,7 @@ _LT_EOF
       ;;
 
     *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
@@ -8150,7 +8407,7 @@ _LT_EOF
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[4-9]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -8160,22 +8417,22 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
 	  done
 	  ;;
 	esac
@@ -8192,28 +8449,30 @@ _LT_EOF
 
       archive_cmds=''
       hardcode_direct=yes
+      hardcode_direct_absolute=yes
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
 
       if test "$GCC" = yes; then
 	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
-  	  # We have reworked collect2
-  	  hardcode_direct=yes
+	  # We have reworked collect2
+	  :
 	  else
-  	  # We have old collect2
-  	  hardcode_direct=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L=yes
-  	  hardcode_libdir_flag_spec='-L$libdir'
-  	  hardcode_libdir_separator=
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
 	  fi
 	  ;;
 	esac
@@ -8224,8 +8483,8 @@ _LT_EOF
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
 	  if test "$aix_use_runtimelinking" = yes; then
@@ -8236,6 +8495,7 @@ _LT_EOF
 	fi
       fi
 
+      export_dynamic_flag_spec='${wl}-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       always_export_symbols=yes
@@ -8243,8 +8503,9 @@ _LT_EOF
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	allow_undefined_flag='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -8265,60 +8526,56 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
 	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
-	 # Determine the default libpath from the value encoded in an empty executable.
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -8340,48 +8597,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -8400,18 +8652,25 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
       ;;
 
     bsdi[45]*)
       export_dynamic_flag_spec=-rdynamic
       ;;
 
-    cygwin* | mingw* | pw32*)
+    cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
@@ -8423,63 +8682,40 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds='true'
+      old_archive_from_new_cmds='true'
       # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
       fix_srcfile_path='`cygpath -w "$srcfile"`'
       enable_shared_with_static_runtimes=yes
       ;;
 
     darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc=no
-      hardcode_direct=no
-      hardcode_automatic=yes
-      hardcode_shlibpath_var=unsupported
-      whole_archive_flag_spec=''
-      link_all_deplibs=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs=no
-          ;;
-      esac
-    fi
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  whole_archive_flag_spec=''
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
       ;;
 
     dgux*)
@@ -8521,9 +8757,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
     hpux9*)
       if test "$GCC" = yes; then
-	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
-	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
       hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
       hardcode_libdir_separator=:
@@ -8543,11 +8779,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       if test "$with_gnu_ld" = no; then
 	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_flag_spec_ld='+b $libdir'
 	hardcode_libdir_separator=:
-
 	hardcode_direct=yes
+	hardcode_direct_absolute=yes
 	export_dynamic_flag_spec='${wl}-E'
-
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	hardcode_minus_L=yes
@@ -8561,7 +8797,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
@@ -8586,12 +8822,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
 	case $host_cpu in
 	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld='+b $libdir'
 	  hardcode_direct=no
 	  hardcode_shlibpath_var=no
 	  ;;
 	*)
 	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
 	  export_dynamic_flag_spec='${wl}-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
@@ -8604,18 +8840,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        cat >conftest.$ac_ext <<_ACEOF
+int foo(void) {}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+        LDFLAGS="$save_LDFLAGS"
       else
-	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld='-rpath $libdir'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       hardcode_libdir_separator=:
+      inherit_rpath=yes
       link_all_deplibs=yes
       ;;
 
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
 	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
@@ -8633,25 +8913,33 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       ;;
 
+    *nto* | *qnx*)
+      ;;
+
     openbsd*)
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
       else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	ld_shlibs=no
       fi
       ;;
 
@@ -8659,18 +8947,19 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       hardcode_libdir_separator=:
       ;;
@@ -8678,49 +8967,59 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_separator=:
       ;;
 
     solaris*)
-      no_undefined_flag=' -z text'
+      no_undefined_flag=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
-	wlarc=''
-	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
       fi
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_shlibpath_var=no
       case $host_os in
       solaris2.[0-5] | solaris2.[0-5].*) ;;
       *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
       esac
       link_all_deplibs=yes
       ;;
@@ -8777,7 +9076,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       ;;
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
       no_undefined_flag='${wl}-z,text'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
@@ -8803,18 +9102,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       allow_undefined_flag='${wl}-z,nodefs'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
       export_dynamic_flag_spec='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -8828,12 +9127,36 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs=no
       ;;
     esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
   fi
 
-{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
 test "$ld_shlibs" = no && can_build_shared=no
 
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 #
 # Do we need to explicitly link libc?
 #
@@ -8851,15 +9174,15 @@ x|xyes)
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } 2>conftest.err; then
         soname=conftest
         lib=conftest
@@ -8874,10 +9197,10 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libname=conftest
         lt_save_allow_undefined_flag=$allow_undefined_flag
         allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
         then
 	  archive_cmds_need_lc=no
@@ -8888,17 +9211,225 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
       else
         cat conftest.err 1>&5
       fi
-      $rm conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
+      $RM conftest*
+      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
       ;;
     esac
   fi
   ;;
 esac
 
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -8912,20 +9443,6 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -8943,7 +9460,7 @@ aix3*)
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[4-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -8962,7 +9479,7 @@ aix4* | aix5*)
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
@@ -8988,9 +9505,18 @@ aix4* | aix5*)
   ;;
 
 amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
   ;;
 
 beos*)
@@ -9013,25 +9539,28 @@ bsdi[45]*)
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
-       $rm \$dlpath'
+       $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
@@ -9040,20 +9569,20 @@ cygwin* | mingw* | pw32*)
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH printed by
         # mingw gcc, but we are running on Cygwin. Gcc prints its search
         # path with ; separators, and with drive letters. We can handle the
         # drive letters (cygwin fileutils understands them), so leave them,
         # especially as we might pass files found there to a mingw objdump,
         # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
       ;;
     pw32*)
@@ -9077,17 +9606,13 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -9141,7 +9666,7 @@ freebsd* | dragonfly*)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
-  freebsd*) # from 4.6 on
+  *) # from 4.6 on, and DragonFly
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
@@ -9180,18 +9705,18 @@ hpux9* | hpux10* | hpux11*)
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
@@ -9204,7 +9729,7 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[3-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -9268,15 +9793,76 @@ linux* | k*bsd*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
+  shlibpath_overrides_runpath=yes
+fi
+
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
+
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -9288,23 +9874,11 @@ linux* | k*bsd*-gnu)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
@@ -9325,14 +9899,16 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx*)
-  version_type=linux
+*nto* | *qnx*)
+  version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
@@ -9341,13 +9917,13 @@ openbsd*)
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[89] | openbsd2.[89].*)
 	shlibpath_overrides_runpath=no
@@ -9381,6 +9957,10 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
+rdos*)
+  dynamic_linker=no
+  ;;
+
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -9415,7 +9995,6 @@ sysv4 | sysv4.3*)
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
@@ -9446,13 +10025,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -9462,6 +10040,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -9473,8 +10062,8 @@ uts4*)
   dynamic_linker=no
   ;;
 esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
@@ -9482,19 +10071,112 @@ if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var" || \
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
    test "X$hardcode_automatic" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
+  # We can hardcode non-existent directories.
   if test "$hardcode_direct" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
      test "$hardcode_minus_L" != no; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action=relink
@@ -9507,10 +10189,11 @@ else
   # directories.
   hardcode_action=unsupported
 fi
-{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink; then
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -9519,36 +10202,12 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   enable_fast_install=needless
 fi
 
-striplib=
-old_striplib=
-{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-       else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-       ;;
-   *)
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-    ;;
-  esac
-fi
 
-if test "x$enable_dlopen" != xyes; then
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -9563,22 +10222,22 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   darwin*)
   # if libdl is installed we need to link against it
-    { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
@@ -9610,49 +10269,37 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_dl_dlopen=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_dl_dlopen=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
 
@@ -9662,13 +10309,13 @@ else
 
 fi
 
-   ;;
+    ;;
 
   *)
-    { echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
+$as_echo_n "checking for shl_load... " >&6; }
 if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -9721,54 +10368,42 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_func_shl_load=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_func_shl_load=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-if test $ac_cv_func_shl_load = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+$as_echo "$ac_cv_func_shl_load" >&6; }
+if test "x$ac_cv_func_shl_load" = x""yes; then
   lt_cv_dlopen="shl_load"
 else
-  { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
 if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
@@ -9800,55 +10435,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_dld_shl_load=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_dld_shl_load=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
-  { echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
+$as_echo_n "checking for dlopen... " >&6; }
 if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -9901,54 +10524,42 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_func_dlopen=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_func_dlopen=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-if test $ac_cv_func_dlopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+$as_echo "$ac_cv_func_dlopen" >&6; }
+if test "x$ac_cv_func_dlopen" = x""yes; then
   lt_cv_dlopen="dlopen"
 else
-  { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
@@ -9980,55 +10591,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_dl_dlopen=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_dl_dlopen=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
-  { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
 if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lsvld  $LIBS"
@@ -10060,55 +10659,43 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_svld_dlopen=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_svld_dlopen=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-if test $ac_cv_lib_svld_dlopen = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
-  { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
+  { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
 if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
@@ -10140,50 +10727,38 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_dld_dld_link=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_dld_dld_link=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
 
 
@@ -10221,18 +10796,18 @@ fi
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
+    { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
 if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
   lt_cv_dlopen_self=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 10235 "configure"
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 10810 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10273,10 +10848,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -10292,13 +10863,13 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }
-EOF
+_LT_EOF
   if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   (eval $ac_link) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
@@ -10316,23 +10887,23 @@ rm -fr conftest*
 
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
 
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
+      { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
 if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
   lt_cv_dlopen_self_static=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 10335 "configure"
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 10906 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10373,10 +10944,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -10392,13 +10959,13 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }
-EOF
+_LT_EOF
   if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   (eval $ac_link) 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
@@ -10416,8 +10983,8 @@ rm -fr conftest*
 
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
     fi
 
     CPPFLAGS="$save_CPPFLAGS"
@@ -10438,6154 +11005,103 @@ echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
 fi
 
 
-# Report which library types will actually be built
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler \
-    CC \
-    LD \
-    lt_prog_compiler_wl \
-    lt_prog_compiler_pic \
-    lt_prog_compiler_static \
-    lt_prog_compiler_no_builtin_flag \
-    export_dynamic_flag_spec \
-    thread_safe_flag_spec \
-    whole_archive_flag_spec \
-    enable_shared_with_static_runtimes \
-    old_archive_cmds \
-    old_archive_from_new_cmds \
-    predep_objects \
-    postdep_objects \
-    predeps \
-    postdeps \
-    compiler_lib_search_path \
-    archive_cmds \
-    archive_expsym_cmds \
-    postinstall_cmds \
-    postuninstall_cmds \
-    old_archive_from_expsyms_cmds \
-    allow_undefined_flag \
-    no_undefined_flag \
-    export_symbols_cmds \
-    hardcode_libdir_flag_spec \
-    hardcode_libdir_flag_spec_ld \
-    hardcode_libdir_separator \
-    hardcode_automatic \
-    module_cmds \
-    module_expsym_cmds \
-    lt_cv_prog_compiler_c_o \
-    exclude_expsyms \
-    include_expsyms; do
-
-    case $var in
-    old_archive_cmds | \
-    old_archive_from_new_cmds | \
-    archive_cmds | \
-    archive_expsym_cmds | \
-    module_cmds | \
-    module_expsym_cmds | \
-    old_archive_from_expsyms_cmds | \
-    export_symbols_cmds | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  { echo "$as_me:$LINENO: creating $ofile" >&5
-echo "$as_me: creating $ofile" >&6;}
-
-  cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
-  withval=$with_tags; tagnames="$withval"
-fi
-
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-    else
-      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-    "") ;;
-    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-echo "$as_me: error: invalid tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-hardcode_shlibpath_var_CXX=unsupported
-hardcode_automatic_CXX=no
-module_cmds_CXX=
-module_expsym_cmds_CXX=
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-enable_shared_with_static_runtimes_CXX=no
-
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-objext_CXX=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
-  lt_prog_compiler_no_builtin_flag_CXX=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-else
-  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      whole_archive_flag_spec_CXX=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    archive_cmds_CXX=''
-    hardcode_direct_CXX=yes
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  hardcode_direct_CXX=yes
-	else
-	  # We have old collect2
-	  hardcode_direct_CXX=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L_CXX=yes
-	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  hardcode_libdir_separator_CXX=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    always_export_symbols_CXX=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag_CXX='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag_CXX="-z nodefs"
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	no_undefined_flag_CXX=' ${wl}-bernotok'
-	allow_undefined_flag_CXX=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	whole_archive_flag_spec_CXX='$convenience'
-	archive_cmds_need_lc_CXX=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag_CXX=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-    # as there is no search path for DLLs.
-    hardcode_libdir_flag_spec_CXX='-L$libdir'
-    allow_undefined_flag_CXX=unsupported
-    always_export_symbols_CXX=no
-    enable_shared_with_static_runtimes_CXX=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-        case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-        esac
-      archive_cmds_need_lc_CXX=no
-      hardcode_direct_CXX=no
-      hardcode_automatic_CXX=yes
-      hardcode_shlibpath_var_CXX=unsupported
-      whole_archive_flag_spec_CXX=''
-      link_all_deplibs_CXX=yes
-
-    if test "$GXX" = yes ; then
-      lt_int_apple_cc_single_mod=no
-      output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-       lt_int_apple_cc_single_mod=yes
-      fi
-      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      else
-          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-        fi
-        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          else
-            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          fi
-            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_CXX=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  freebsd[12]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    ld_shlibs_CXX=no
-    ;;
-  freebsd-elf*)
-    archive_cmds_need_lc_CXX=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    ld_shlibs_CXX=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    hardcode_direct_CXX=yes
-    hardcode_minus_L_CXX=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      ld_shlibs_CXX=no
-      ;;
-    aCC*)
-      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        ld_shlibs_CXX=no
-      fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_CXX=:
-
-      case $host_cpu in
-      hppa*64*|ia64*)
-	hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
-        ;;
-      *)
-	export_dynamic_flag_spec_CXX='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      hardcode_direct_CXX=no
-      hardcode_shlibpath_var_CXX=no
-      ;;
-    *)
-      hardcode_direct_CXX=yes
-      hardcode_minus_L_CXX=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
-    esac
-
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    hppa*64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    *)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  interix3*)
-    hardcode_direct_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	link_all_deplibs_CXX=yes
-	;;
-    esac
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	esac
-	archive_cmds_need_lc_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC*)
-        # Portland Group C++ compiler
-	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  netbsd* | netbsdelf*-gnu)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      hardcode_libdir_flag_spec_CXX='-R$libdir'
-      hardcode_direct_CXX=yes
-      hardcode_shlibpath_var_CXX=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    ld_shlibs_CXX=no
-    ;;
-  openbsd*)
-    hardcode_direct_CXX=yes
-    hardcode_shlibpath_var_CXX=no
-    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-      export_dynamic_flag_spec_CXX='${wl}-E'
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    fi
-    output_verbose_link_cmd='echo'
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' -expect_unresolved \*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        archive_cmds_need_lc_CXX=yes
-	no_undefined_flag_CXX=' -zdefs'
-	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-R$libdir'
-	hardcode_shlibpath_var_CXX=no
-	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker. We must also pass each convience library through
-	    # to the system linker between allextract/defaultextract.
-	    # The C++ compiler will combine linker options so we
-	    # cannot just pass the convience library names through
-	    # without $wl.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	link_all_deplibs_CXX=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-    no_undefined_flag_CXX='${wl}-z,text'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    no_undefined_flag_CXX='${wl}-z,text'
-    allow_undefined_flag_CXX='${wl}-z,nodefs'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-    export_dynamic_flag_spec_CXX='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-esac
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-GCC_CXX="$GXX"
-LD_CXX="$LD"
-
-
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
-	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
-	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
-	 else
-	   predep_objects_CXX="$predep_objects_CXX $p"
-	 fi
-       else
-	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
-	 else
-	   postdep_objects_CXX="$postdep_objects_CXX $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling CXX test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-case $host_os in
-interix3*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  predep_objects_CXX=
-  postdep_objects_CXX=
-  postdeps_CXX=
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    postdeps_CXX='-lCstd -lCrun'
-    ;;
-  esac
-  ;;
-esac
-
-
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-esac
-
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    lt_prog_compiler_wl_CXX='-Wl,'
-    lt_prog_compiler_static_CXX='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_CXX='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_CXX='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      lt_prog_compiler_pic_CXX=
-      ;;
-    interix3*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_CXX=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	;;
-      *)
-	lt_prog_compiler_pic_CXX='-fPIC'
-	;;
-      esac
-      ;;
-    *)
-      lt_prog_compiler_pic_CXX='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix4* | aix5*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  lt_prog_compiler_static_CXX='-Bstatic'
-	else
-	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           lt_prog_compiler_pic_CXX='-qnocommon'
-           lt_prog_compiler_wl_CXX='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      lt_prog_compiler_pic_CXX='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      lt_prog_compiler_pic_CXX='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-static'
-	    ;;
-	  pgCC*)
-	    # Portland Group C++ compiler.
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-fpic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    lt_prog_compiler_pic_CXX='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd* | netbsdelf*-gnu)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    lt_prog_compiler_wl_CXX='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    lt_prog_compiler_pic_CXX='-pic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	lt_prog_compiler_can_build_shared_CXX=no
-	;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works_CXX=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12703: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:12707: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_CXX=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
-    case $lt_prog_compiler_pic_CXX in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-     esac
-else
-    lt_prog_compiler_pic_CXX=
-     lt_prog_compiler_can_build_shared_CXX=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_CXX=
-    ;;
-  *)
-    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-    ;;
-esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_static_works_CXX=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_CXX=yes
-       fi
-     else
-       lt_prog_compiler_static_works_CXX=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
 
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
 
-if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
-    :
-else
-    lt_prog_compiler_static_CXX=
-fi
 
 
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o_CXX=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12807: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:12811: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_CXX=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
 
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
 
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
 
-  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix4* | aix5*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
-    link_all_deplibs_CXX=no
-  ;;
-  *)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
 
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_CXX" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_CXX=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_CXX in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_CXX
-	pic_flag=$lt_prog_compiler_pic_CXX
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-        allow_undefined_flag_CXX=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_CXX=no
-        else
-	  archive_cmds_need_lc_CXX=yes
-        fi
-        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
+striplib=
+old_striplib=
+{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
+# FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  freebsd*) # from 4.6 on
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
     else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix3*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
     ;;
   *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
+    { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
     ;;
   esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var_CXX" || \
-   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_CXX" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_CXX=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_CXX=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_CXX=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-echo "${ECHO_T}$hardcode_action_CXX" >&6; }
 
-if test "$hardcode_action_CXX" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
 
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_CXX \
-    CC_CXX \
-    LD_CXX \
-    lt_prog_compiler_wl_CXX \
-    lt_prog_compiler_pic_CXX \
-    lt_prog_compiler_static_CXX \
-    lt_prog_compiler_no_builtin_flag_CXX \
-    export_dynamic_flag_spec_CXX \
-    thread_safe_flag_spec_CXX \
-    whole_archive_flag_spec_CXX \
-    enable_shared_with_static_runtimes_CXX \
-    old_archive_cmds_CXX \
-    old_archive_from_new_cmds_CXX \
-    predep_objects_CXX \
-    postdep_objects_CXX \
-    predeps_CXX \
-    postdeps_CXX \
-    compiler_lib_search_path_CXX \
-    archive_cmds_CXX \
-    archive_expsym_cmds_CXX \
-    postinstall_cmds_CXX \
-    postuninstall_cmds_CXX \
-    old_archive_from_expsyms_cmds_CXX \
-    allow_undefined_flag_CXX \
-    no_undefined_flag_CXX \
-    export_symbols_cmds_CXX \
-    hardcode_libdir_flag_spec_CXX \
-    hardcode_libdir_flag_spec_ld_CXX \
-    hardcode_libdir_separator_CXX \
-    hardcode_automatic_CXX \
-    module_cmds_CXX \
-    module_expsym_cmds_CXX \
-    lt_cv_prog_compiler_c_o_CXX \
-    exclude_expsyms_CXX \
-    include_expsyms_CXX; do
-
-    case $var in
-    old_archive_cmds_CXX | \
-    old_archive_from_new_cmds_CXX | \
-    archive_cmds_CXX | \
-    archive_expsym_cmds_CXX | \
-    module_cmds_CXX | \
-    module_expsym_cmds_CXX | \
-    old_archive_from_expsyms_cmds_CXX | \
-    export_symbols_cmds_CXX | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
 
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
 
-cfgfile="$ofile"
 
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
 
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_CXX
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_CXX
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
+  # Report which library types will actually be built
+  { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_CXX"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="      program t\n      end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-GCC_F77="$G77"
-LD_F77="$LD"
-
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_F77='-Wl,'
-    lt_prog_compiler_static_F77='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_F77='-fno-common'
-      ;;
-
-    interix3*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_F77=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_F77=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='-fPIC'
-	;;
-      esac
-      ;;
-
-    *)
-      lt_prog_compiler_pic_F77='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      else
-	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_F77='-qnocommon'
-         lt_prog_compiler_wl_F77='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-KPIC'
-	lt_prog_compiler_static_F77='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-fpic'
-	lt_prog_compiler_static_F77='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_F77='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_F77='-non_shared'
-        ;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_F77='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_F77='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl_F77='-Qoption ld '
-      lt_prog_compiler_pic_F77='-PIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_F77='-Kconform_pic'
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic_F77='-pic'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_F77"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works_F77=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_F77"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14368: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:14372: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_F77=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
-    case $lt_prog_compiler_pic_F77 in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-     esac
-else
-    lt_prog_compiler_pic_F77=
-     lt_prog_compiler_can_build_shared_F77=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_F77=
-    ;;
-  *)
-    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_static_works_F77=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_F77=yes
-       fi
-     else
-       lt_prog_compiler_static_works_F77=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
-
-if test x"$lt_prog_compiler_static_works_F77" = xyes; then
-    :
-else
-    lt_prog_compiler_static_F77=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o_F77=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14472: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:14476: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_F77=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
-  runpath_var=
-  allow_undefined_flag_F77=
-  enable_shared_with_static_runtimes_F77=no
-  archive_cmds_F77=
-  archive_expsym_cmds_F77=
-  old_archive_From_new_cmds_F77=
-  old_archive_from_expsyms_cmds_F77=
-  export_dynamic_flag_spec_F77=
-  whole_archive_flag_spec_F77=
-  thread_safe_flag_spec_F77=
-  hardcode_libdir_flag_spec_F77=
-  hardcode_libdir_flag_spec_ld_F77=
-  hardcode_libdir_separator_F77=
-  hardcode_direct_F77=no
-  hardcode_minus_L_F77=no
-  hardcode_shlibpath_var_F77=unsupported
-  link_all_deplibs_F77=unknown
-  hardcode_automatic_F77=no
-  module_cmds_F77=
-  module_expsym_cmds_F77=
-  always_export_symbols_F77=no
-  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_F77=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+  { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
 
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
   case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs_F77=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_F77=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_F77=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_F77=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=no
-      enable_shared_with_static_runtimes_F77=yes
-      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    interix3*)
-      hardcode_direct_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_F77='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs_F77=no
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_F77=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_F77=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs_F77" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_F77=
-      export_dynamic_flag_spec_F77=
-      whole_archive_flag_spec_F77=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=yes
-      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_F77=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_F77=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds_F77=''
-      hardcode_direct_F77=yes
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  hardcode_direct_F77=yes
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_F77=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_F77=yes
-  	  hardcode_libdir_flag_spec_F77='-L$libdir'
-  	  hardcode_libdir_separator_F77=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_F77=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_F77='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-      program main
-
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_F77="-z nodefs"
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-      program main
-
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_F77=' ${wl}-bernotok'
-	  allow_undefined_flag_F77=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_F77='$convenience'
-	  archive_cmds_need_lc_F77=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_F77=no
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec_F77=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_F77=' '
-      allow_undefined_flag_F77=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_F77='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_F77=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_F77=no
-      hardcode_direct_F77=no
-      hardcode_automatic_F77=yes
-      hardcode_shlibpath_var_F77=unsupported
-      whole_archive_flag_spec_F77=''
-      link_all_deplibs_F77=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_F77=no
-          ;;
-      esac
-    fi
-      ;;
-
-    dgux*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs_F77=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_direct_F77=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
-
-	hardcode_direct_F77=yes
-	export_dynamic_flag_spec_F77='${wl}-E'
-
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_F77=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
-	  ;;
-	*)
-	  hardcode_direct_F77=yes
-	  export_dynamic_flag_spec_F77='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_F77=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      link_all_deplibs_F77=yes
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    newsos6)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    openbsd*)
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_F77='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_F77='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      allow_undefined_flag_F77=unsupported
-      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_F77=:
-      ;;
-
-    solaris*)
-      no_undefined_flag_F77=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_shlibpath_var_F77=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
-      esac
-      link_all_deplibs_F77=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_F77='$CC -r -o $output$reload_objs'
-	  hardcode_direct_F77=no
-        ;;
-	motorola)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_F77=no
-      export_dynamic_flag_spec_F77='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_F77=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_F77=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
-      no_undefined_flag_F77='${wl}-z,text'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_F77='${wl}-z,text'
-      allow_undefined_flag_F77='${wl}-z,nodefs'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    *)
-      ld_shlibs_F77=no
-      ;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_F77" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_F77=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_F77 in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_F77
-	pic_flag=$lt_prog_compiler_pic_F77
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-        allow_undefined_flag_F77=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_F77=no
-        else
-	  archive_cmds_need_lc_F77=yes
-        fi
-        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
     fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
 
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  freebsd*) # from 4.6 on
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix3*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
-   test -n "$runpath_var_F77" || \
-   test "X$hardcode_automatic_F77" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_F77" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-     test "$hardcode_minus_L_F77" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_F77=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_F77=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_F77=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-echo "${ECHO_T}$hardcode_action_F77" >&6; }
-
-if test "$hardcode_action_F77" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_F77 \
-    CC_F77 \
-    LD_F77 \
-    lt_prog_compiler_wl_F77 \
-    lt_prog_compiler_pic_F77 \
-    lt_prog_compiler_static_F77 \
-    lt_prog_compiler_no_builtin_flag_F77 \
-    export_dynamic_flag_spec_F77 \
-    thread_safe_flag_spec_F77 \
-    whole_archive_flag_spec_F77 \
-    enable_shared_with_static_runtimes_F77 \
-    old_archive_cmds_F77 \
-    old_archive_from_new_cmds_F77 \
-    predep_objects_F77 \
-    postdep_objects_F77 \
-    predeps_F77 \
-    postdeps_F77 \
-    compiler_lib_search_path_F77 \
-    archive_cmds_F77 \
-    archive_expsym_cmds_F77 \
-    postinstall_cmds_F77 \
-    postuninstall_cmds_F77 \
-    old_archive_from_expsyms_cmds_F77 \
-    allow_undefined_flag_F77 \
-    no_undefined_flag_F77 \
-    export_symbols_cmds_F77 \
-    hardcode_libdir_flag_spec_F77 \
-    hardcode_libdir_flag_spec_ld_F77 \
-    hardcode_libdir_separator_F77 \
-    hardcode_automatic_F77 \
-    module_cmds_F77 \
-    module_expsym_cmds_F77 \
-    lt_cv_prog_compiler_c_o_F77 \
-    exclude_expsyms_F77 \
-    include_expsyms_F77; do
-
-    case $var in
-    old_archive_cmds_F77 | \
-    old_archive_from_new_cmds_F77 | \
-    archive_cmds_F77 | \
-    archive_expsym_cmds_F77 | \
-    module_cmds_F77 | \
-    module_expsym_cmds_F77 | \
-    old_archive_from_expsyms_cmds_F77 | \
-    export_symbols_cmds_F77 | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_F77
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_F77
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_F77"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
+  { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
+  { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
 
-# ### END LIBTOOL TAG CONFIG: $tagname
 
-__EOF__
 
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
 fi
-
-
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -16594,3176 +11110,133 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 CC="$lt_save_CC"
 
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-
-
-# Source file extension for Java test sources.
-ac_ext=java
 
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
 
-old_archive_cmds_GCJ=$old_archive_cmds
 
 
-lt_prog_compiler_no_builtin_flag_GCJ=
 
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
 
+        ac_config_commands="$ac_config_commands libtool"
 
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16691: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:16695: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
 
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-else
-    :
-fi
 
-fi
+# Only expand once:
 
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
 
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_GCJ='-Wl,'
-    lt_prog_compiler_static_GCJ='-static'
 
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_GCJ='-fno-common'
-      ;;
-
-    interix3*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_GCJ=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_GCJ=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='-fPIC'
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `$CC -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
 	;;
-      esac
-      ;;
-
-    *)
-      lt_prog_compiler_pic_GCJ='-fPIC'
-      ;;
     esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      else
-	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_GCJ='-qnocommon'
-         lt_prog_compiler_wl_GCJ='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-KPIC'
-	lt_prog_compiler_static_GCJ='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-fpic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_GCJ='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_GCJ='-non_shared'
-        ;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_GCJ='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl_GCJ='-Qoption ld '
-      lt_prog_compiler_pic_GCJ='-PIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_GCJ='-Kconform_pic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic_GCJ='-pic'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works_GCJ=no
-  ac_outfile=conftest.$ac_objext
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16959: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:16963: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_GCJ=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
-    case $lt_prog_compiler_pic_GCJ in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-     esac
 else
-    lt_prog_compiler_pic_GCJ=
-     lt_prog_compiler_can_build_shared_GCJ=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_GCJ=
-    ;;
-  *)
-    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_static_works_GCJ=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_GCJ=yes
-       fi
-     else
-       lt_prog_compiler_static_works_GCJ=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
-    :
-else
-    lt_prog_compiler_static_GCJ=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o_GCJ=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17063: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:17067: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_GCJ=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
+    { $as_echo "$as_me:$LINENO: checking whether __SUNPRO_C is declared" >&5
+$as_echo_n "checking whether __SUNPRO_C is declared... " >&6; }
+if test "${ac_cv_have_decl___SUNPRO_C+set}" = set; then
+  $as_echo_n "(cached) " >&6
 else
-  need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
-  runpath_var=
-  allow_undefined_flag_GCJ=
-  enable_shared_with_static_runtimes_GCJ=no
-  archive_cmds_GCJ=
-  archive_expsym_cmds_GCJ=
-  old_archive_From_new_cmds_GCJ=
-  old_archive_from_expsyms_cmds_GCJ=
-  export_dynamic_flag_spec_GCJ=
-  whole_archive_flag_spec_GCJ=
-  thread_safe_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_ld_GCJ=
-  hardcode_libdir_separator_GCJ=
-  hardcode_direct_GCJ=no
-  hardcode_minus_L_GCJ=no
-  hardcode_shlibpath_var_GCJ=unsupported
-  link_all_deplibs_GCJ=unknown
-  hardcode_automatic_GCJ=no
-  module_cmds_GCJ=
-  module_expsym_cmds_GCJ=
-  always_export_symbols_GCJ=no
-  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_GCJ=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs_GCJ=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_GCJ=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_GCJ=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_GCJ=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=no
-      enable_shared_with_static_runtimes_GCJ=yes
-      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    interix3*)
-      hardcode_direct_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs_GCJ=no
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_GCJ=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_GCJ=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs_GCJ" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_GCJ=
-      export_dynamic_flag_spec_GCJ=
-      whole_archive_flag_spec_GCJ=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=yes
-      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_GCJ=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_GCJ=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds_GCJ=''
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  hardcode_direct_GCJ=yes
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_GCJ=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_GCJ=yes
-  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-  	  hardcode_libdir_separator_GCJ=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_GCJ=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_GCJ='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
+  cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-
+$ac_includes_default
 int
 main ()
 {
+#ifndef __SUNPRO_C
+  (void) __SUNPRO_C;
+#endif
 
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_have_decl___SUNPRO_C=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-
+	ac_cv_have_decl___SUNPRO_C=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_GCJ="-z nodefs"
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_GCJ=' ${wl}-bernotok'
-	  allow_undefined_flag_GCJ=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_GCJ='$convenience'
-	  archive_cmds_need_lc_GCJ=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_GCJ=no
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec_GCJ=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ=' '
-      allow_undefined_flag_GCJ=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_GCJ='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_GCJ=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_GCJ=no
-      hardcode_direct_GCJ=no
-      hardcode_automatic_GCJ=yes
-      hardcode_shlibpath_var_GCJ=unsupported
-      whole_archive_flag_spec_GCJ=''
-      link_all_deplibs_GCJ=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_GCJ=no
-          ;;
-      esac
-    fi
-      ;;
-
-    dgux*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs_GCJ=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_direct_GCJ=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-
-	hardcode_direct_GCJ=yes
-	export_dynamic_flag_spec_GCJ='${wl}-E'
-
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_GCJ=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
-	  ;;
-	*)
-	  hardcode_direct_GCJ=yes
-	  export_dynamic_flag_spec_GCJ='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_GCJ=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    newsos6)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    openbsd*)
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_GCJ='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      allow_undefined_flag_GCJ=unsupported
-      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    solaris*)
-      no_undefined_flag_GCJ=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
-      esac
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-	  hardcode_direct_GCJ=no
-        ;;
-	motorola)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_GCJ=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_GCJ=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
-      no_undefined_flag_GCJ='${wl}-z,text'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_GCJ='${wl}-z,text'
-      allow_undefined_flag_GCJ='${wl}-z,nodefs'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      ld_shlibs_GCJ=no
-      ;;
-    esac
-  fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_GCJ=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_GCJ in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_GCJ
-	pic_flag=$lt_prog_compiler_pic_GCJ
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-        allow_undefined_flag_GCJ=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_GCJ=no
-        else
-	  archive_cmds_need_lc_GCJ=yes
-        fi
-        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___SUNPRO_C" >&5
+$as_echo "$ac_cv_have_decl___SUNPRO_C" >&6; }
+if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then
+  SUNCC="yes"
 else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  SUNCC="no"
 fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
 
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  freebsd*) # from 4.6 on
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix3*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var_GCJ" || \
-   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_GCJ" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-     test "$hardcode_minus_L_GCJ" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_GCJ=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_GCJ=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_GCJ=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-
-if test "$hardcode_action_GCJ" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_GCJ \
-    CC_GCJ \
-    LD_GCJ \
-    lt_prog_compiler_wl_GCJ \
-    lt_prog_compiler_pic_GCJ \
-    lt_prog_compiler_static_GCJ \
-    lt_prog_compiler_no_builtin_flag_GCJ \
-    export_dynamic_flag_spec_GCJ \
-    thread_safe_flag_spec_GCJ \
-    whole_archive_flag_spec_GCJ \
-    enable_shared_with_static_runtimes_GCJ \
-    old_archive_cmds_GCJ \
-    old_archive_from_new_cmds_GCJ \
-    predep_objects_GCJ \
-    postdep_objects_GCJ \
-    predeps_GCJ \
-    postdeps_GCJ \
-    compiler_lib_search_path_GCJ \
-    archive_cmds_GCJ \
-    archive_expsym_cmds_GCJ \
-    postinstall_cmds_GCJ \
-    postuninstall_cmds_GCJ \
-    old_archive_from_expsyms_cmds_GCJ \
-    allow_undefined_flag_GCJ \
-    no_undefined_flag_GCJ \
-    export_symbols_cmds_GCJ \
-    hardcode_libdir_flag_spec_GCJ \
-    hardcode_libdir_flag_spec_ld_GCJ \
-    hardcode_libdir_separator_GCJ \
-    hardcode_automatic_GCJ \
-    module_cmds_GCJ \
-    module_expsym_cmds_GCJ \
-    lt_cv_prog_compiler_c_o_GCJ \
-    exclude_expsyms_GCJ \
-    include_expsyms_GCJ; do
-
-    case $var in
-    old_archive_cmds_GCJ | \
-    old_archive_from_new_cmds_GCJ | \
-    archive_cmds_GCJ | \
-    archive_expsym_cmds_GCJ | \
-    module_cmds_GCJ | \
-    module_expsym_cmds_GCJ | \
-    old_archive_from_expsyms_cmds_GCJ | \
-    export_symbols_cmds_GCJ | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_GCJ"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-lt_cv_prog_compiler_c_o_RC=yes
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_RC \
-    CC_RC \
-    LD_RC \
-    lt_prog_compiler_wl_RC \
-    lt_prog_compiler_pic_RC \
-    lt_prog_compiler_static_RC \
-    lt_prog_compiler_no_builtin_flag_RC \
-    export_dynamic_flag_spec_RC \
-    thread_safe_flag_spec_RC \
-    whole_archive_flag_spec_RC \
-    enable_shared_with_static_runtimes_RC \
-    old_archive_cmds_RC \
-    old_archive_from_new_cmds_RC \
-    predep_objects_RC \
-    postdep_objects_RC \
-    predeps_RC \
-    postdeps_RC \
-    compiler_lib_search_path_RC \
-    archive_cmds_RC \
-    archive_expsym_cmds_RC \
-    postinstall_cmds_RC \
-    postuninstall_cmds_RC \
-    old_archive_from_expsyms_cmds_RC \
-    allow_undefined_flag_RC \
-    no_undefined_flag_RC \
-    export_symbols_cmds_RC \
-    hardcode_libdir_flag_spec_RC \
-    hardcode_libdir_flag_spec_ld_RC \
-    hardcode_libdir_separator_RC \
-    hardcode_automatic_RC \
-    module_cmds_RC \
-    module_expsym_cmds_RC \
-    lt_cv_prog_compiler_c_o_RC \
-    exclude_expsyms_RC \
-    include_expsyms_RC; do
-
-    case $var in
-    old_archive_cmds_RC | \
-    old_archive_from_new_cmds_RC | \
-    archive_cmds_RC | \
-    archive_expsym_cmds_RC | \
-    module_cmds_RC | \
-    module_expsym_cmds_RC | \
-    old_archive_from_expsyms_cmds_RC | \
-    export_symbols_cmds_RC | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_RC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_RC
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_RC"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
 fi
 
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	;;
-
-      *)
-	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then
+  enableval=$enable_silent_rules;
 fi
 
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+case $enable_silent_rules in
+yes) AM_DEFAULT_VERBOSITY=0;;
+no)  AM_DEFAULT_VERBOSITY=1;;
+*)   AM_DEFAULT_VERBOSITY=0;;
+esac
+AM_BACKSLASH='\'
 
 
 
-DEFAULT_ENCODINGSDIR=${libdir}/X11/fonts/encodings
+encodingsdir=${libdir}/X11/fonts/encodings
 
 # Check whether --with-encodingsdir was given.
 if test "${with_encodingsdir+set}" = set; then
-  withval=$with_encodingsdir; ENCODINGSDIR="$withval"
-else
-  ENCODINGSDIR="$DEFAULT_ENCODINGSDIR"
+  withval=$with_encodingsdir; encodingsdir="$withval"
 fi
 
+ENCODINGSDIR="$encodingsdir"
 
 
 # zlib
 
 
-{ echo "$as_me:$LINENO: checking for gzclose in -lz" >&5
-echo $ECHO_N "checking for gzclose in -lz... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for gzclose in -lz" >&5
+$as_echo_n "checking for gzclose in -lz... " >&6; }
 if test "${ac_cv_lib_z_gzclose+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lz  $LIBS"
@@ -19795,49 +11268,37 @@ case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
   (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
   ac_cv_lib_z_gzclose=yes
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_cv_lib_z_gzclose=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext \
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_gzclose" >&5
-echo "${ECHO_T}$ac_cv_lib_z_gzclose" >&6; }
-if test $ac_cv_lib_z_gzclose = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_z_gzclose" >&5
+$as_echo "$ac_cv_lib_z_gzclose" >&6; }
+if test "x$ac_cv_lib_z_gzclose" = x""yes; then
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBZ 1
 _ACEOF
@@ -19854,10 +11315,10 @@ if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
 	if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
 set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $PKG_CONFIG in
   [\\/]* | ?:[\\/]*)
@@ -19870,9 +11331,9 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -19884,11 +11345,11 @@ esac
 fi
 PKG_CONFIG=$ac_cv_path_PKG_CONFIG
 if test -n "$PKG_CONFIG"; then
-  { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-echo "${ECHO_T}$PKG_CONFIG" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -19897,10 +11358,10 @@ if test -z "$ac_cv_path_PKG_CONFIG"; then
   ac_pt_PKG_CONFIG=$PKG_CONFIG
   # Extract the first word of "pkg-config", so it can be a program name with args.
 set dummy pkg-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $ac_pt_PKG_CONFIG in
   [\\/]* | ?:[\\/]*)
@@ -19913,9 +11374,9 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -19927,11 +11388,11 @@ esac
 fi
 ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
 if test -n "$ac_pt_PKG_CONFIG"; then
-  { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
-echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
   if test "x$ac_pt_PKG_CONFIG" = x; then
@@ -19939,12 +11400,8 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
     PKG_CONFIG=$ac_pt_PKG_CONFIG
@@ -19956,58 +11413,54 @@ fi
 fi
 if test -n "$PKG_CONFIG"; then
 	_pkg_min_version=0.9.0
-	{ echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
-echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; }
+	{ $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
 	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+		{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 	else
-		{ echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+		{ $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 		PKG_CONFIG=""
 	fi
 
 fi
 
 pkg_failed=no
-{ echo "$as_me:$LINENO: checking for FONTENC" >&5
-echo $ECHO_N "checking for FONTENC... $ECHO_C" >&6; }
-
-if test -n "$PKG_CONFIG"; then
-    if test -n "$FONTENC_CFLAGS"; then
-        pkg_cv_FONTENC_CFLAGS="$FONTENC_CFLAGS"
-    else
-        if test -n "$PKG_CONFIG" && \
-    { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xproto\"") >&5
+{ $as_echo "$as_me:$LINENO: checking for FONTENC" >&5
+$as_echo_n "checking for FONTENC... " >&6; }
+
+if test -n "$FONTENC_CFLAGS"; then
+    pkg_cv_FONTENC_CFLAGS="$FONTENC_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xproto\"") >&5
   ($PKG_CONFIG --exists --print-errors "xproto") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   pkg_cv_FONTENC_CFLAGS=`$PKG_CONFIG --cflags "xproto" 2>/dev/null`
 else
   pkg_failed=yes
 fi
-    fi
-else
-	pkg_failed=untried
+ else
+    pkg_failed=untried
 fi
-if test -n "$PKG_CONFIG"; then
-    if test -n "$FONTENC_LIBS"; then
-        pkg_cv_FONTENC_LIBS="$FONTENC_LIBS"
-    else
-        if test -n "$PKG_CONFIG" && \
-    { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xproto\"") >&5
+if test -n "$FONTENC_LIBS"; then
+    pkg_cv_FONTENC_LIBS="$FONTENC_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xproto\"") >&5
   ($PKG_CONFIG --exists --print-errors "xproto") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
   pkg_cv_FONTENC_LIBS=`$PKG_CONFIG --libs "xproto" 2>/dev/null`
 else
   pkg_failed=yes
 fi
-    fi
-else
-	pkg_failed=untried
+ else
+    pkg_failed=untried
 fi
 
 
@@ -20020,14 +11473,14 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-	        FONTENC_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xproto"`
+	        FONTENC_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "xproto" 2>&1`
         else
-	        FONTENC_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xproto"`
+	        FONTENC_PKG_ERRORS=`$PKG_CONFIG --print-errors "xproto" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$FONTENC_PKG_ERRORS" >&5
 
-	{ { echo "$as_me:$LINENO: error: Package requirements (xproto) were not met:
+	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xproto) were not met:
 
 $FONTENC_PKG_ERRORS
 
@@ -20038,7 +11491,7 @@ Alternatively, you may set the environment variables FONTENC_CFLAGS
 and FONTENC_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 " >&5
-echo "$as_me: error: Package requirements (xproto) were not met:
+$as_echo "$as_me: error: Package requirements (xproto) were not met:
 
 $FONTENC_PKG_ERRORS
 
@@ -20051,7 +11504,9 @@ See the pkg-config man page for more details.
 " >&2;}
    { (exit 1); exit 1; }; }
 elif test $pkg_failed = untried; then
-	{ { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -20059,9 +11514,9 @@ Alternatively, you may set the environment variables FONTENC_CFLAGS
 and FONTENC_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
-To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.
 See \`config.log' for more details." >&5
-echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -20069,17 +11524,17 @@ Alternatively, you may set the environment variables FONTENC_CFLAGS
 and FONTENC_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
-To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.
 See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+   { (exit 1); exit 1; }; }; }
 else
 	FONTENC_CFLAGS=$pkg_cv_FONTENC_CFLAGS
 	FONTENC_LIBS=$pkg_cv_FONTENC_LIBS
-        { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+        { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 	:
 fi
-
+FONTENC_CFLAGS="$CWARNFLAGS $FONTENC_CFLAGS"
 
 
 
@@ -20113,9 +11568,7 @@ fi
 
 
 
-
-
-if test x$LINT != xno; then
+ if test x$LINT != xno; then
   LINT_TRUE=
   LINT_FALSE='#'
 else
@@ -20139,15 +11592,15 @@ fi
 	if test "x$RELEASE_VERSION" != "x"; then
 		PACKAGE="$PACKAGE-$RELEASE_VERSION"
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-		{ echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
-echo "$as_me: Building with package name set to $PACKAGE" >&6;}
+		{ $as_echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
+$as_echo "$as_me: Building with package name set to $PACKAGE" >&6;}
 	fi
 
 cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | sed -ne 's/^\([^\.]\+\).*/\1/p'`
+#define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1`
 _ACEOF
 
-	PVM=`echo $PACKAGE_VERSION | sed -ne 's/^\([^\.]\+\)\.\([^\.]\+\).*/\2/p'`
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
 	if test "x$PVM" = "x"; then
 		PVM="0"
 	fi
@@ -20156,7 +11609,7 @@ cat >>confdefs.h <<_ACEOF
 #define PACKAGE_VERSION_MINOR $PVM
 _ACEOF
 
-	PVP=`echo $PACKAGE_VERSION | sed -ne 's/^\([^\.]\+\)\.\([^\.]\+\)\.\([^\.]\+\).*/\3/p'`
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
 	if test "x$PVP" = "x"; then
 		PVP="0"
 	fi
@@ -20167,6 +11620,14 @@ _ACEOF
 
 
 
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+
+distcleancheck_listfiles='find . -type f ! -name ChangeLog -print'
+
+
+
 ac_config_files="$ac_config_files Makefile src/Makefile fontenc.pc"
 
 cat >confcache <<\_ACEOF
@@ -20196,11 +11657,12 @@ _ACEOF
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -20233,12 +11695,12 @@ echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
     test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -20254,7 +11716,7 @@ ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
   # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
   #    will be set to the directory where LIBOBJS objects are built.
   ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
@@ -20265,48 +11727,50 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
 if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
+$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 if test -z "${LINT_TRUE}" && test -z "${LINT_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"LINT\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"LINT\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"LINT\" was never defined.
+$as_echo "$as_me: error: conditional \"LINT\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -20319,24 +11783,28 @@ ac_cs_silent=false
 SHELL=\${CONFIG_SHELL-$SHELL}
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
 fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
+
+
 
 
 # PATH needs CR
@@ -20347,17 +11815,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -20373,8 +11869,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -20397,7 +11891,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -20410,17 +11904,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -20442,7 +11929,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
 	    s//\1/
 	    q
@@ -20493,7 +11980,7 @@ $as_unset CDPATH
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -20521,7 +12008,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -20534,19 +12020,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -20560,19 +12049,28 @@ else
   as_mkdir_p=false
 fi
 
-# Find out whether ``test -x'' works.  Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
-  as_executable_p="test -x"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
 else
-  as_executable_p=:
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
 fi
-rm -f conf$$.file
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -20587,8 +12085,8 @@ exec 6>&1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libfontenc $as_me 1.0.4, which was
-generated by GNU Autoconf 2.60.  Invocation command line was
+This file was extended by libfontenc $as_me 1.0.5, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -20601,7 +12099,16 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q`
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 # Files that config.status was made for.
 config_files="$ac_config_files"
 config_headers="$ac_config_headers"
@@ -20609,22 +12116,23 @@ config_commands="$ac_config_commands"
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [FILE]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
 
 Configuration files:
 $config_files
@@ -20638,24 +12146,26 @@ $config_commands
 Report bugs to <bug-autoconf@gnu.org>."
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-libfontenc config.status 1.0.4
-configured by $0, generated by GNU Autoconf 2.60,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+libfontenc config.status 1.0.5
+configured by $0, generated by GNU Autoconf 2.63,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
 ac_pwd='$ac_pwd'
 srcdir='$srcdir'
 INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
@@ -20677,30 +12187,36 @@ do
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
+    $as_echo "$ac_cs_version"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
     ac_need_defaults=false;;
   --header | --heade | --head | --hea )
     $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
     ac_need_defaults=false;;
   --he | --h)
     # Conflict between --help and --header
-    { echo "$as_me: error: ambiguous option: $1
+    { $as_echo "$as_me: error: ambiguous option: $1
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; };;
   --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
@@ -20719,35 +12235,292 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
   export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  exec "\$@"
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 exec 5>>config.log
 {
   echo
   sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
 ## Running $as_me. ##
 _ASBOX
-  echo "$ac_log"
+  $as_echo "$ac_log"
 } >&5
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #
 # INIT-COMMANDS
 #
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+  ;;
+esac
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
 # Handling of arguments.
 for ac_config_target in $ac_config_targets
@@ -20755,12 +12528,13 @@ do
   case $ac_config_target in
     "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
     "fontenc.pc") CONFIG_FILES="$CONFIG_FILES fontenc.pc" ;;
 
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
@@ -20801,224 +12575,144 @@ $debug ||
   (umask 077 && mkdir "$tmp")
 } ||
 {
-   echo "$me: cannot create a temporary directory in ." >&2
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
 if test -n "$CONFIG_FILES"; then
 
-_ACEOF
-
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-AMSHOWCMDSAT!$AMSHOWCMDSAT$ac_delim
-AMDEPSHOWCMDSAT!$AMDEPSHOWCMDSAT$ac_delim
-AMPRETTYECHO!$AMPRETTYECHO$ac_delim
-AMCMDECHO!$AMCMDECHO$ac_delim
-LT_QUIET!$LT_QUIET$ac_delim
-MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
-MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
-MAINT!$MAINT$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-DEPDIR!$DEPDIR$ac_delim
-am__include!$am__include$ac_delim
-am__quote!$am__quote$ac_delim
-AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-CCDEPMODE!$CCDEPMODE$ac_delim
-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-LN_S!$LN_S$ac_delim
-ECHO!$ECHO$ac_delim
-AR!$AR$ac_delim
-RANLIB!$RANLIB$ac_delim
-CPP!$CPP$ac_delim
-_ACEOF
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
-    break
-  elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
+ac_cr='
'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
 fi
 
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
 _ACEOF
 
 
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-CXX!$CXX$ac_delim
-CXXFLAGS!$CXXFLAGS$ac_delim
-ac_ct_CXX!$ac_ct_CXX$ac_delim
-CXXDEPMODE!$CXXDEPMODE$ac_delim
-am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
-am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
-CXXCPP!$CXXCPP$ac_delim
-F77!$F77$ac_delim
-FFLAGS!$FFLAGS$ac_delim
-ac_ct_F77!$ac_ct_F77$ac_delim
-LIBTOOL!$LIBTOOL$ac_delim
-ENCODINGSDIR!$ENCODINGSDIR$ac_delim
-PKG_CONFIG!$PKG_CONFIG$ac_delim
-FONTENC_CFLAGS!$FONTENC_CFLAGS$ac_delim
-FONTENC_LIBS!$FONTENC_LIBS$ac_delim
-LINT!$LINT$ac_delim
-LINT_FLAGS!$LINT_FLAGS$ac_delim
-LINT_TRUE!$LINT_TRUE$ac_delim
-LINT_FALSE!$LINT_FALSE$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 21; then
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
    { (exit 1); exit 1; }; }
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
 done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
 
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACAWK
 _ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
 _ACEOF
 
-
 # VPATH may cause trouble with some makes, so we remove $(srcdir),
 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
@@ -21034,19 +12728,133 @@ s/^[^=]*=[	 ]*$//
 }'
 fi
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_FILES"
 
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_t"; then
+    break
+  elif $ac_last_try; then
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
+$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
+   { (exit 1); exit 1; }; }
+fi # test -n "$CONFIG_HEADERS"
+
 
-for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
 do
   case $ac_tag in
   :[FHLC]) ac_mode=$ac_tag; continue;;
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
    { (exit 1); exit 1; }; };;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
@@ -21075,26 +12883,38 @@ echo "$as_me: error: Invalid tag $ac_tag." >&2;}
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
    { (exit 1); exit 1; }; };;
       esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
     done
 
     # Let's still pretend it is `configure' which instantiates (i.e., don't
     # use $as_me), people would be surprised to read:
     #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
     if test x"$ac_file" != x-; then
       configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
     fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
     esac
     ;;
   esac
@@ -21104,7 +12924,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
 	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
+$as_echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21130,7 +12950,7 @@ echo X"$ac_file" |
     as_dirs=
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
       as_dirs="'$as_qdir' $as_dirs"
@@ -21139,7 +12959,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
 	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21160,17 +12980,17 @@ echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
   ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -21208,14 +13028,20 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
   *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # If the template does not know about datarootdir, expand it.
 # FIXME: This hack should be removed a few years after 2.60.
 ac_datarootdir_hack=; ac_datarootdir_seen=
 
-case `sed -n '/datarootdir/ {
+ac_sed_dataroot='
+/datarootdir/ {
   p
   q
 }
@@ -21224,13 +13050,14 @@ case `sed -n '/datarootdir/ {
 /@infodir@/p
 /@localedir@/p
 /@mandir@/p
-' $ac_file_inputs` in
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 *datarootdir*) ac_datarootdir_seen=yes;;
 *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
   ac_datarootdir_hack='
   s&@datadir@&$datadir&g
   s&@docdir@&$docdir&g
@@ -21244,15 +13071,16 @@ _ACEOF
 # Neutralize VPATH when `$srcdir' = `.'.
 # Shell code in configure.ac might set extrasub.
 # FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
+s|@configure_input@|$ac_sed_conf_input|;t t
 s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
 s&@srcdir@&$ac_srcdir&;t t
 s&@abs_srcdir@&$ac_abs_srcdir&;t t
 s&@top_srcdir@&$ac_top_srcdir&;t t
@@ -21261,136 +13089,77 @@ s&@builddir@&$ac_builddir&;t t
 s&@abs_builddir@&$ac_abs_builddir&;t t
 s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&2;}
 
   rm -f "$tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-  esac
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
  ;;
   :H)
   #
   # CONFIG_HEADER
   #
-_ACEOF
-
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status.  If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless.  But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([	 #]*\\)[^	 ]*\\([	 ]*'
-ac_dB='\\)[	 (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
-
-uniq confdefs.h |
-  sed -n '
-	t rset
-	:rset
-	s/^[	 ]*#[	 ]*define[	 ][	 ]*//
-	t ok
-	d
-	:ok
-	s/[\\&,]/\\&/g
-	s/^\('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
-	s/^\('"$ac_word_re"'\)[	 ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
-  ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[	 #]*u.*,/* & */,' >>conftest.defines
-
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is:	 sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is:	 sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be:	 sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
-do
-  # Write a here document:
-    cat >>$CONFIG_STATUS <<_ACEOF
-    # First, check the format of the line:
-    cat >"\$tmp/defines.sed" <<\\CEOF
-/^[	 ]*#[	 ]*undef[	 ][	 ]*$ac_word_re[	 ]*\$/b def
-/^[	 ]*#[	 ]*define[	 ][	 ]*$ac_word_re[(	 ]/b def
-b
-:def
-_ACEOF
-  sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-    sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
-  ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
-  sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
-  grep . conftest.tail >/dev/null || break
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines conftest.tail
-
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
-cat >>$CONFIG_STATUS <<\_ACEOF
   if test x"$ac_file" != x-; then
-    echo "/* $configure_input  */" >"$tmp/config.h"
-    cat "$ac_result" >>"$tmp/config.h"
-    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+    } >"$tmp/config.h" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
-      rm -f $ac_file
-      mv "$tmp/config.h" $ac_file
+      rm -f "$ac_file"
+      mv "$tmp/config.h" "$ac_file" \
+	|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
     fi
   else
-    echo "/* $configure_input  */"
-    cat "$ac_result"
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
+$as_echo "$as_me: error: could not create -" >&2;}
+   { (exit 1); exit 1; }; }
   fi
-  rm -f "$tmp/out12"
-# Compute $ac_file's index in $config_headers.
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $ac_file | $ac_file:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X$ac_file : 'X\(//\)[^/]' \| \
-	 X$ac_file : 'X\(//\)$' \| \
-	 X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
-echo X$ac_file |
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21410,29 +13179,40 @@ echo X$ac_file |
 	  s/.*/./; q'`/stamp-h$_am_stamp_count
  ;;
 
-  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
+  :C)  { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
  ;;
   esac
 
 
   case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`$as_dirname -- "$mf" ||
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
 	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$mf" |
+$as_echo X"$mf" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21450,33 +13230,33 @@ echo X"$mf" |
 	    q
 	  }
 	  s/.*/./; q'`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`$as_dirname -- "$file" ||
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
 	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$file" |
+$as_echo X"$file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21494,7 +13274,7 @@ echo X"$file" |
 	    q
 	  }
 	  s/.*/./; q'`
-    { as_dir=$dirpart/$fdir
+      { as_dir=$dirpart/$fdir
   case $as_dir in #(
   -*) as_dir=./$as_dir;;
   esac
@@ -21502,7 +13282,7 @@ echo X"$file" |
     as_dirs=
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
       as_dirs="'$as_qdir' $as_dirs"
@@ -21511,7 +13291,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
 	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21532,13 +13312,649 @@ echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
   done
-done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking.  This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $* ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
+
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[^=]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$@"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1+=\$2"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1=\$$1\$2"
+}
+
+_LT_EOF
+    ;;
+  esac
+
+
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
  ;;
 
   esac
@@ -21550,6 +13966,11 @@ _ACEOF
 chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -21571,4 +13992,8 @@ if test "$no_create" != yes; then
   # would make configure fail if this is the last instruction.
   $ac_cs_success || { (exit 1); exit 1; }
 fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
 
diff --git a/libfontenc/configure.ac b/libfontenc/configure.ac
index dcddc57b4..fc28ef97e 100644
--- a/libfontenc/configure.ac
+++ b/libfontenc/configure.ac
@@ -23,27 +23,24 @@ dnl Process this file with autoconf to create configure.
 
 AC_PREREQ([2.57])
 
-AC_INIT(libfontenc, 1.0.4, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], libfontenc)
+AC_INIT(libfontenc, 1.0.5, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], libfontenc)
 AM_INIT_AUTOMAKE([dist-bzip2])
 AM_MAINTAINER_MODE
 
+# Require xorg-macros: XORG_CWARNFLAGS, XORG_CHANGELOG, XORG_WITH_LINT
+m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.2 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.2)
 AM_CONFIG_HEADER(config.h)
 
-# Require xorg-macros version 1.1.0 or newer for XORG_WITH_LINT macro
-m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
-XORG_MACROS_VERSION(1.1)
-
 # Check for progs
 AC_PROG_CC
 AC_PROG_LIBTOOL
+XORG_CWARNFLAGS
 
-m4_ifdef([AS_HELP_STRING], , [m4_define([AS_HELP_STRING], m4_defn([AC_HELP_STRING]))])
-
-DEFAULT_ENCODINGSDIR=${libdir}/X11/fonts/encodings
-AC_ARG_WITH(encodingsdir,
-	AS_HELP_STRING([--with-encodingsdir=ENCODINGSDIR], [Path to font encodings]),
-	[ENCODINGSDIR="$withval"],
-	[ENCODINGSDIR="$DEFAULT_ENCODINGSDIR"])
+encodingsdir=${libdir}/X11/fonts/encodings
+AC_ARG_WITH(encodingsdir, AC_HELP_STRING([--with-encodingsdir=<pathname>],
+	[Path to font encodings]), [encodingsdir="$withval"])
+ENCODINGSDIR="$encodingsdir"
 AC_SUBST(ENCODINGSDIR)
 
 # zlib
@@ -52,7 +49,7 @@ AC_CHECK_LIB(z, gzclose)
 
 # Check for dependencies
 PKG_CHECK_MODULES(FONTENC, xproto)
-
+FONTENC_CFLAGS="$CWARNFLAGS $FONTENC_CFLAGS"
 AC_SUBST(FONTENC_CFLAGS)
 AC_SUBST(FONTENC_LIBS)
 
@@ -61,6 +58,7 @@ XORG_WITH_LINT
 LINT_FLAGS="${LINT_FLAGS} ${FONTENC_CFLAGS}"
 		  
 XORG_RELEASE_VERSION
+XORG_CHANGELOG
 
 AC_OUTPUT([Makefile
 	   src/Makefile
diff --git a/libfontenc/depcomp b/libfontenc/depcomp
index 04701da53..e5f9736c7 100644
--- a/libfontenc/depcomp
+++ b/libfontenc/depcomp
@@ -1,9 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2005-07-09.11
+scriptversion=2007-03-29.01
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
+# Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -91,7 +92,20 @@ gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
   stat=$?
   if test $stat -eq 0; then :
   else
@@ -201,34 +215,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -276,6 +295,46 @@ icc)
   rm -f "$tmpdepfile"
   ;;
 
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
 tru64)
    # The Tru64 compiler uses -MD to generate dependencies as a side
    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -288,13 +347,13 @@ tru64)
 
    if test "$libtool" = yes; then
       # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
+      # static library.  This mechanism is used in libtool 1.4 series to
       # handle both shared and static libraries in a single compilation.
       # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
       #
       # With libtool 1.5 this exception was removed, and libtool now
       # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # compilations output dependencies in $dir.libs/$base.o.d and
       # in $dir$base.o.d.  We have to check for both files, because
       # one of the two compilations can be disabled.  We should prefer
       # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
diff --git a/libfontenc/install-sh b/libfontenc/install-sh
index 4d4a9519e..a5897de6e 100644
--- a/libfontenc/install-sh
+++ b/libfontenc/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2005-05-14.22
+scriptversion=2006-12-25.00
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,38 +39,68 @@ scriptversion=2005-05-14.22
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
 
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
 
-chmodcmd="$chmodprog 0755"
-chowncmd=
 chgrpcmd=
-stripcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -80,81 +110,86 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
-while test -n "$1"; do
+while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
+
+    -C) copy_on_change=true;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
     --help) echo "$usage"; exit $?;;
 
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
+    --)	shift
 	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
   esac
+  shift
 done
 
-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
   if test -z "$dir_arg"; then
     echo "$0: no input file specified." >&2
     exit 1
@@ -164,24 +199,47 @@ if test -z "$1"; then
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
 for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
     dst=$src
-    src=
-
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
   else
+
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
@@ -190,71 +248,199 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
-      dst=$dst/`basename "$src"`
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
     fi
   fi
 
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
 
-  # Make sure that the destination directory exists.
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
 
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
 
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    shift
-    IFS=$oIFS
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
 
-    pathcomp=
+      eval "$initialize_posix_glob"
 
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
       shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
       fi
-      pathcomp=$pathcomp/
-    done
+    fi
   fi
 
   if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
   else
-    dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
@@ -262,10 +448,9 @@ do
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
 
     # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -273,48 +458,59 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit 1; }
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
 done
 
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit 0
-}
-
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
diff --git a/libfontenc/ltmain.sh b/libfontenc/ltmain.sh
index c715b5941..6939dcc4a 100644
--- a/libfontenc/ltmain.sh
+++ b/libfontenc/ltmain.sh
@@ -1,30 +1,174 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
+# Generated from ltmain.m4sh.
+
+# ltmain.sh (GNU libtool) 2.2.6
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
 # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
 #
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+#     --config             show all configuration variables
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
+#
+# MODE must be one of the following:
+#
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#       host-triplet:	$host
+#       shell:		$SHELL
+#       compiler:		$LTCC
+#       compiler flags:		$LTCFLAGS
+#       linker:		$LD (gnu? $with_gnu_ld)
+#       $progname:		(GNU libtool) 2.2.6
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=2.2.6
+TIMESTAMP=""
+package_revision=1.3012
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+
+$lt_unset CDPATH
+
+
 
-basename="s,^.*/,,g"
+
+
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/bin/sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# Generated shell functions inserted here.
 
 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 # is ksh but when the shell is invoked as "sh" and the current value of
@@ -34,36 +178,396 @@ basename="s,^.*/,,g"
 progpath="$0"
 
 # The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
 
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=:
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
 
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION="1.5.22 Debian 1.5.22-4"
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname${mode+: }$mode: $*"
+}
 
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
-  setopt NO_GLOB_SUBST
-fi
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
-# Check that we have a working $echo.
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "X$my_tmpdir" | $Xsed
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "X$1" | $Xsed \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $SED -n '/^# Usage:/,/# -h/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    $ECHO
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+	p
+     }' < "$progpath"
+    exit $?
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    func_error "missing argument for $1"
+    exit_cmd=exit
+}
+
+exit_cmd=:
+
+
+
+
+
+# Check that we have a working $ECHO.
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+  # Yippee, $ECHO works!
   :
 else
-  # Restart under the correct shell, and then maybe $echo will work.
+  # Restart under the correct shell, and then maybe $ECHO will work.
   exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 fi
 
@@ -76,145 +580,424 @@ EOF
   exit $EXIT_SUCCESS
 fi
 
-default_mode=
-help="Try \`$progname --help' for more information."
 magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  SP2NL='tr \040 \012'
-  NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  SP2NL='tr \100 \n'
-  NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  $echo "$modename: not configured to build any kind of library" 1>&2
-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
-fi
+magic_exe="%%%MAGIC EXE variable%%%"
 
 # Global variables.
-mode=$default_mode
+# $mode is unset
 nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
 execute_dlfiles=
-duplicate_deps=no
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
 
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
 
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
 {
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
 
-    if test "$run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
 
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
 
-      if test ! -d "$my_tmpdir"; then
-	# Failing that, at least try and use $RANDOM to avoid a race
-	my_tmpdir="${my_template}-${RANDOM-0}$$"
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
 
-	save_mktempdir_umask=`umask`
-	umask 0077
-	$mkdir "$my_tmpdir"
-	umask $save_mktempdir_umask
-      fi
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
 
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || {
-        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
-	exit $EXIT_FAILURE
-      }
+    exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    $ECHO "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      $ECHO "enable shared libraries"
+    else
+      $ECHO "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      $ECHO "enable static libraries"
+    else
+      $ECHO "disable static libraries"
     fi
 
-    $echo "X$my_tmpdir" | $Xsed
+    exit $?
 }
 
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
 
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
+
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# Parse options once, thoroughly.  This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
 {
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
+
+  # Shorthand for --mode=foo, only valid as the first argument
+  case $1 in
+  clean|clea|cle|cl)
+    shift; set dummy --mode clean ${1+"$@"}; shift
     ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 | \
-	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
+  compile|compil|compi|comp|com|co|c)
+    shift; set dummy --mode compile ${1+"$@"}; shift
     ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
+  execute|execut|execu|exec|exe|ex|e)
+    shift; set dummy --mode execute ${1+"$@"}; shift
     ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
+  finish|finis|fini|fin|fi|f)
+    shift; set dummy --mode finish ${1+"$@"}; shift
+    ;;
+  install|instal|insta|inst|ins|in|i)
+    shift; set dummy --mode install ${1+"$@"}; shift
+    ;;
+  link|lin|li|l)
+    shift; set dummy --mode link ${1+"$@"}; shift
     ;;
+  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+    shift; set dummy --mode uninstall ${1+"$@"}; shift
+    ;;
+  esac
+
+  # Parse non-mode specific arguments:
+  while test "$#" -gt 0; do
+    opt="$1"
+    shift
+
+    case $opt in
+      --config)		func_config					;;
+
+      --debug)		preserve_args="$preserve_args $opt"
+			func_echo "enabling shell trace mode"
+			opt_debug='set -x'
+			$opt_debug
+			;;
+
+      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			execute_dlfiles="$execute_dlfiles $1"
+			shift
+			;;
+
+      --dry-run | -n)	opt_dry_run=:					;;
+      --features)       func_features					;;
+      --finish)		mode="finish"					;;
+
+      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			case $1 in
+			  # Valid mode arguments:
+			  clean)	;;
+			  compile)	;;
+			  execute)	;;
+			  finish)	;;
+			  install)	;;
+			  link)		;;
+			  relink)	;;
+			  uninstall)	;;
+
+			  # Catch anything else as an error
+			  *) func_error "invalid argument for $opt"
+			     exit_cmd=exit
+			     break
+			     ;;
+		        esac
+
+			mode="$1"
+			shift
+			;;
+
+      --preserve-dup-deps)
+			opt_duplicate_deps=:				;;
+
+      --quiet|--silent)	preserve_args="$preserve_args $opt"
+			opt_silent=:
+			;;
+
+      --verbose| -v)	preserve_args="$preserve_args $opt"
+			opt_silent=false
+			;;
+
+      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			preserve_args="$preserve_args $opt $1"
+			func_enable_tag "$1"	# tagname is set here
+			shift
+			;;
+
+      # Separate optargs to long options:
+      -dlopen=*|--mode=*|--tag=*)
+			func_opt_split "$opt"
+			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+			shift
+			;;
+
+      -\?|-h)		func_usage					;;
+      --help)		opt_help=:					;;
+      --version)	func_version					;;
+
+      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
+
+      *)		nonopt="$opt"
+			break
+			;;
+    esac
+  done
+
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+      ;;
   esac
-  $echo $win32_libid_type
+
+  # Having warned about all mis-specified options, bail out if
+  # anything was wrong.
+  $exit_cmd $EXIT_FAILURE
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+$opt_help || {
+  # Sanity checks first:
+  func_check_version_match
+
+  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+    func_fatal_configuration "not configured to build any kind of library"
+  fi
+
+  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+
+
+  # Darwin sucks
+  eval std_shrext=\"$shrext_cmds\"
+
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    func_error "unrecognized option \`-dlopen'"
+    $ECHO "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$progname --help --mode=$mode' for more information."
+}
+
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_ltwrapper_scriptname_result=""
+    if func_ltwrapper_executable_p "$1"; then
+	func_dirname_and_basename "$1" "" "."
+	func_stripname '' '.exe' "$func_basename_result"
+	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    fi
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
 }
 
 
@@ -226,39 +1009,32 @@ func_win32_libid ()
 # arg is usually of the form 'gcc ...'
 func_infer_tag ()
 {
+    $opt_debug
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
+        func_quote_for_eval "$arg"
+	CC_quoted="$CC_quoted $func_quote_for_eval_result"
       done
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
 	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 	    # Evaluate the configuration.
 	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 	    CC_quoted=
 	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
+	      # Double-quote args containing other shell metacharacters.
+	      func_quote_for_eval "$arg"
+	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	    done
 	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
@@ -272,11 +1048,10 @@ func_infer_tag ()
 	# was found and let the user know that the "--tag" command
 	# line option must be used.
 	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
 	fi
 	;;
       esac
@@ -284,343 +1059,48 @@ func_infer_tag ()
 }
 
 
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-
-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
-      exit $EXIT_FAILURE
-    fi
-}
 
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
 {
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-    my_status=""
-
-    $show "${rm}r $my_gentop"
-    $run ${rm}r "$my_gentop"
-    $show "$mkdir $my_gentop"
-    $run $mkdir "$my_gentop"
-    my_status=$?
-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-      exit $my_status
-    fi
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xdir="$my_gentop/$my_xlib"
-
-      $show "${rm}r $my_xdir"
-      $run ${rm}r "$my_xdir"
-      $show "$mkdir $my_xdir"
-      $run $mkdir "$my_xdir"
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
-	exit $exit_status
-      fi
-      case $host in
-      *-darwin*)
-	$show "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	if test -z "$run"; then
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-	  if test -n "$darwin_arches"; then 
-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    ${rm}r unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd "$darwin_orig_dir"
- 	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	fi # $run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-    func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
-  shift
-
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-      preserve_args="${preserve_args}=$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit $EXIT_FAILURE
-	;;
-      esac
-
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-	else
-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    $echo
-    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
-    $echo "This is free software; see the source for copying conditions.  There is NO"
-    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $?
-    ;;
-
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
-    done
-    exit $?
-    ;;
-
-  --debug)
-    $echo "$progname: enabling shell trace mode"
-    set -x
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    $echo "host: $host"
+    write_libobj=${1}
     if test "$build_libtool_libs" = yes; then
-      $echo "enable shared libraries"
+      write_lobj=\'${2}\'
     else
-      $echo "disable shared libraries"
+      write_lobj=none
     fi
+
     if test "$build_old_libs" = yes; then
-      $echo "enable static libraries"
+      write_oldobj=\'${3}\'
     else
-      $echo "disable static libraries"
+      write_oldobj=none
     fi
-    exit $?
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --preserve-dup-deps) duplicate_deps="yes" ;;
-
-  --quiet | --silent)
-    show=:
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --tag)
-    prevopt="--tag"
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
 
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no) 
-  ;;
-shared)
-  build_libtool_libs=no
-  build_old_libs=yes
-  ;;
-static)
-  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-  ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-    case $nonopt in
-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
 
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
+# Name of the PIC object.
+pic_object=$write_lobj
 
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
 
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
 
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
     # Get the compilation command and the source file.
     base_compile=
     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
@@ -629,6 +1109,7 @@ if test -z "$show_help"; then
     arg_mode=normal
     libobj=
     later=
+    pie_flag=
 
     for arg
     do
@@ -649,15 +1130,18 @@ if test -z "$show_help"; then
 	# Accept any command-line options.
 	case $arg in
 	-o)
-	  if test -n "$libobj" ; then
-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
 	  arg_mode=target
 	  continue
 	  ;;
 
-	-static | -prefer-pic | -prefer-non-pic)
+	-pie | -fpie | -fPIE)
+          pie_flag="$pie_flag $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
 	  later="$later $arg"
 	  continue
 	  ;;
@@ -673,31 +1157,25 @@ if test -z "$show_help"; then
 	  ;;            #  replaced later.  I would guess that would be a bug.
 
 	-Wc,*)
-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
 	  lastarg=
 	  save_ifs="$IFS"; IFS=','
- 	  for arg in $args; do
+	  for arg in $args; do
 	    IFS="$save_ifs"
-
-	    # Double-quote args containing other shell metacharacters.
-	    # Many Bourne shells cannot handle close brackets correctly
-	    # in scan sets, so we specify it separately.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    lastarg="$lastarg $arg"
+	    func_quote_for_eval "$arg"
+	    lastarg="$lastarg $func_quote_for_eval_result"
 	  done
 	  IFS="$save_ifs"
-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
 
 	  # Add the arguments to base_compile.
 	  base_compile="$base_compile $lastarg"
 	  continue
 	  ;;
 
-	* )
+	*)
 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
@@ -709,64 +1187,42 @@ if test -z "$show_help"; then
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      case $lastarg in
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
-      # in scan sets (worked around with variable expansion),
-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
-      # at all, so we specify them separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      base_compile="$base_compile $lastarg"
+      func_quote_for_eval "$lastarg"
+      base_compile="$base_compile $func_quote_for_eval_result"
     done # for arg
 
     case $arg_mode in
     arg)
-      $echo "$modename: you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
+      func_fatal_error "you must specify an argument for -Xcompile"
       ;;
     target)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_error "you must specify a target with \`-o'"
       ;;
     *)
       # Get the name of the library object.
-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
       ;;
     esac
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
     case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
     esac
 
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
     case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
       ;;
     esac
 
@@ -774,7 +1230,15 @@ if test -z "$show_help"; then
 
     for arg in $later; do
       case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
       -static)
+	build_libtool_libs=no
 	build_old_libs=yes
 	continue
 	;;
@@ -791,28 +1255,17 @@ if test -z "$show_help"; then
       esac
     done
 
-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-    case $qlibobj in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qlibobj="\"$qlibobj\"" ;;
-    esac
-    test "X$libobj" != "X$qlibobj" \
-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
     lobj=${xdir}$objdir/$objname
 
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
 
     # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then
@@ -821,12 +1274,9 @@ if test -z "$show_help"; then
       removelist="$lobj $libobj ${libobj}T"
     fi
 
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
       pic_mode=default
       ;;
     esac
@@ -838,10 +1288,8 @@ if test -z "$show_help"; then
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
     else
       output_obj=
       need_locks=no
@@ -851,13 +1299,13 @@ if test -z "$show_help"; then
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
     elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`
 
@@ -868,34 +1316,22 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
-      $echo "$srcfile" > "$lockfile"
+      removelist="$removelist $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
     fi
 
+    $opt_dry_run || $RM $removelist
+    removelist="$removelist $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-    case $qsrcfile in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      qsrcfile="\"$qsrcfile\"" ;;
-    esac
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
 
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
@@ -909,32 +1345,19 @@ EOF
 	command="$base_compile $qsrcfile"
       fi
 
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	exit_status=$?
-	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $exit_status
-	fi
-      fi
+      func_mkdir_p "$xdir$objdir"
 
       if test -z "$output_obj"; then
 	# Place PIC objects in $objdir
 	command="$command -o $lobj"
       fi
 
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -948,45 +1371,27 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
       fi
 
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
       # Allow error messages only from the first compilation.
       if test "$suppress_opt" = yes; then
-        suppress_output=' >/dev/null 2>&1'
+	suppress_output=' >/dev/null 2>&1'
       fi
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
     fi
 
     # Only build a position-dependent object if we build old libraries.
     if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then
 	# Don't build PIC code
-	command="$base_compile $qsrcfile"
+	command="$base_compile $qsrcfile$pie_flag"
       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
@@ -996,17 +1401,12 @@ EOF
 
       # Suppress compiler output if we already did a PIC compilation.
       command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -1020,53 +1420,2620 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$mode'"
+        ;;
+    esac
+
+    $ECHO
+    $ECHO "Try \`$progname --help' for more information about other modes."
+
+    exit $?
+}
+
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
 	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
 	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
       fi
+    done
 
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
 
-EOF
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_quote_for_eval "$file"
+      args="$args $func_quote_for_eval_result"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
     else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	$ECHO "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
 
-EOF
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
     fi
 
-    $run $mv "${libobj}T" "${libobj}"
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    $ECHO "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $ECHO "   $libdir"
+    done
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $ECHO "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
 
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
+      $ECHO "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $ECHO "   - have your system administrator run these commands:$admincmds"
     fi
+    if test -f /etc/ld.so.conf; then
+      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $ECHO
 
+    $ECHO "See any operating system documentation about shared libraries for"
+    case $host in
+      solaris2.[6789]|solaris2.1[0-9])
+        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	$ECHO "pages."
+	;;
+      *)
+        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+        ;;
+    esac
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
+}
+
+test "$mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    install_prog="$install_prog$func_quote_for_eval_result"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      install_prog="$install_prog $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_verbose "extracting global C symbols from \`$progfile'"
+	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+	  $opt_dry_run || {
+	    eval '$ECHO ": $name " >> "$nlist"'
+	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	  }
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+"
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* )
+	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs.  */"
+	    lt_dlsym_const= ;;
+	  *osf5*)
+	    echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+	    lt_dlsym_const= ;;
+	  *)
+	    lt_dlsym_const=const ;;
+	  esac
+
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) symtab_cflags="$symtab_cflags $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
     ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+	func_emit_wrapper_part1_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part1_arg1=$1
+	fi
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$ECHO "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
+	fi
+
+	$ECHO "\
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2* | *-cegcc*)
+	  $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_arg1=$1
+	fi
+
+	# split this up so that func_emit_cwrapperexe_src
+	# can call each part independently.
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
+
+const char *program_name = NULL;
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+
+static const char *script_text_part1 =
+EOF
+
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+
+static const char *script_text_part2 =
+EOF
+	    func_emit_wrapper_part2 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+
+	    cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_pathlist "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_pathlist "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
+
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+
+  /* very simple arg parsing; don't want to rely on getopt */
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
+	  return 0;
+	}
+    }
+
+  newargz = XMALLOC (char *, argc + 1);
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+			  tmp_pathspec));
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+			  actual_cwrapper_path));
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  for (i = 0; i < newargc; i++)
+    {
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
 
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal ("getcwd failed");
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+			      tmp_pathspec));
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  char *errstr = strerror (errno);
+	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
     case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
@@ -1084,10 +4051,10 @@ EOF
       allow_undefined=yes
       ;;
     esac
-    libtool_args="$nonopt"
+    libtool_args=$nonopt
     base_compile="$nonopt $@"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
+    compile_command=$nonopt
+    finalize_command=$nonopt
 
     compile_rpath=
     finalize_rpath=
@@ -1102,6 +4069,7 @@ EOF
     dllsearchpath=
     lib_search_path=`pwd`
     inst_prefix_dir=
+    new_inherited_linker_flags=
 
     avoid_version=no
     dlfiles=
@@ -1117,7 +4085,6 @@ EOF
     no_install=no
     objs=
     non_pic_objects=
-    notinst_path= # paths that contain not-installed libtool libraries
     precious_files_regex=
     prefer_static_libs=no
     preload=no
@@ -1131,28 +4098,44 @@ EOF
     thread_safe=no
     vinfo=
     vinfo_number=no
-
+    weak_libs=
+    single_module="${wl}-single_module"
     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
     for arg
     do
       case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	    func_warning "complete static linking is impossible in this configuration"
 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes
-	else
+	  ;;
+	-static)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=built
-	fi
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
 	build_libtool_libs=no
 	build_old_libs=yes
 	break
@@ -1167,20 +4150,16 @@ EOF
     while test "$#" -gt 0; do
       arg="$1"
       shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
 
       # If the previous option needs an argument, assign it.
       if test -n "$prev"; then
 	case $prev in
 	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
 	  ;;
 	esac
 
@@ -1188,8 +4167,8 @@ EOF
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
 	    preload=yes
 	  fi
 	  case $arg in
@@ -1227,10 +4206,8 @@ EOF
 	  ;;
 	expsyms)
 	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
 	  prev=
 	  continue
 	  ;;
@@ -1239,18 +4216,21 @@ EOF
 	  prev=
 	  continue
 	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
 	  prev=
 	  continue
 	  ;;
-	release)
-	  release="-$arg"
+	inst_prefix)
+	  inst_prefix_dir="$arg"
 	  prev=
 	  continue
 	  ;;
@@ -1258,39 +4238,30 @@ EOF
 	  if test -f "$arg"; then
 	    save_arg=$arg
 	    moreargs=
-	    for fil in `cat $save_arg`
+	    for fil in `cat "$save_arg"`
 	    do
 #	      moreargs="$moreargs $fil"
 	      arg=$fil
 	      # A libtool-controlled object.
 
 	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	      if func_lalib_unsafe_p "$arg"; then
 		pic_object=
 		non_pic_object=
 
 		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
+		func_source "$arg"
 
-		if test -z "$pic_object" || \
+		if test -z "$pic_object" ||
 		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
+		   test "$pic_object" = none &&
 		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
+		  func_fatal_error "cannot find name of object for \`$arg'"
 		fi
 
 		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
 
 		if test "$pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
@@ -1315,7 +4286,7 @@ EOF
 		  fi
 
 		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
+		  func_append libobjs " $pic_object"
 		  arg="$pic_object"
 		fi
 
@@ -1325,7 +4296,7 @@ EOF
 		  non_pic_object="$xdir$non_pic_object"
 
 		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_append non_pic_objects " $non_pic_object"
 		  if test -z "$pic_object" || test "$pic_object" = none ; then
 		    arg="$non_pic_object"
 		  fi
@@ -1333,46 +4304,48 @@ EOF
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
 		  non_pic_object="$pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_append non_pic_objects " $non_pic_object"
 		fi
 	      else
 		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
-		else
-		  # Dry-run case.
-
+		if $opt_dry_run; then
 		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
 		fi
 	      fi
 	    done
 	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
+	    func_fatal_error "link input file \`$arg' does not exist"
 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
 	rpath | xrpath)
 	  # We need an absolute path.
 	  case $arg in
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "only absolute run-paths are allowed"
 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
@@ -1389,39 +4362,37 @@ EOF
 	  prev=
 	  continue
 	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
+	shrext)
+	  shrext_cmds="$arg"
 	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
 	  continue
 	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
+	weak)
+	  weak_libs="$weak_libs $arg"
 	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
 	  continue
 	  ;;
 	xcclinker)
 	  linker_flags="$linker_flags $qarg"
 	  compiler_flags="$compiler_flags $qarg"
 	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
-	shrext)
-  	  shrext_cmds="$arg"
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
 	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
-	darwin_framework|darwin_framework_skip)
-	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
 	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
 	  continue
 	  ;;
 	*)
@@ -1437,16 +4408,16 @@ EOF
       case $arg in
       -all-static)
 	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
 	fi
 	continue
 	;;
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
 	;;
 
       -avoid-version)
@@ -1471,8 +4442,7 @@ EOF
 
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
@@ -1482,15 +4452,8 @@ EOF
 	continue
 	;;
 
-      -framework|-arch|-isysroot)
-	case " $CC " in
-	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
-		prev=darwin_framework_skip ;;
-	  *) compiler_flags="$compiler_flags $arg"
-	     prev=darwin_framework ;;
-	esac
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
+      -framework)
+	prev=framework
 	continue
 	;;
 
@@ -1504,25 +4467,30 @@ EOF
       -L[A-Z][A-Z]*:*)
 	case $with_gcc/$host in
 	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
 	  ;;
 	esac
 	continue
 	;;
 
       -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	func_stripname '-L' '' "$arg"
+	dir=$func_stripname_result
+	if test -z "$dir"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    absdir="$dir"
-	    notinst_path="$notinst_path $dir"
-	  fi
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
 	  dir="$absdir"
 	  ;;
 	esac
@@ -1534,14 +4502,16 @@ EOF
 	  ;;
 	esac
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -1552,7 +4522,7 @@ EOF
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -1566,7 +4536,7 @@ EOF
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
+	    deplibs="$deplibs System.ltframework"
 	    continue
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
@@ -1590,57 +4560,35 @@ EOF
 	continue
 	;;
 
+      -module)
+	module=yes
+	continue
+	;;
+
       # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.
-      -model)
-	compile_command="$compile_command $arg"
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot)
 	compiler_flags="$compiler_flags $arg"
-	finalize_command="$finalize_command $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
 	prev=xcompiler
 	continue
 	;;
 
-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
 	compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+	esac
 	continue
 	;;
 
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m* pass through architecture-specific compiler args for GCC
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -pg pass through profiling flag for GCC
-      # @file GCC response files
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
-      -t[45]*|-txscale*|@*)
-
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-        compile_command="$compile_command $arg"
-        finalize_command="$finalize_command $arg"
-        compiler_flags="$compiler_flags $arg"
-        continue
-        ;;
-
-      -shrext)
-	prev=shrext
+      -multi_module)
+	single_module="${wl}-multi_module"
 	continue
 	;;
 
@@ -1651,11 +4599,11 @@ EOF
 
       -no-install)
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
@@ -1696,13 +4644,13 @@ EOF
 	;;
 
       -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "only absolute run-paths are allowed"
 	  ;;
 	esac
 	case "$xrpath " in
@@ -1712,7 +4660,17 @@ EOF
 	continue
 	;;
 
-      -static)
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
@@ -1730,47 +4688,49 @@ EOF
 	prev=vinfo
 	continue
 	;;
+
       -version-number)
 	prev=vinfo
 	vinfo_number=yes
 	continue
 	;;
 
+      -weak)
+        prev=weak
+	continue
+	;;
+
       -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
+          func_quote_for_eval "$flag"
+	  arg="$arg $wl$func_quote_for_eval_result"
+	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
 	;;
 
       -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
+          func_quote_for_eval "$flag"
+	  arg="$arg $wl$func_quote_for_eval_result"
+	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+	  linker_flags="$linker_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
 	;;
 
       -Xcompiler)
@@ -1788,16 +4748,36 @@ EOF
 	continue
 	;;
 
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
       # Some other compiler flag.
       -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
 	;;
 
       *.$objext)
@@ -1809,32 +4789,23 @@ EOF
 	# A libtool-controlled object.
 
 	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_unsafe_p "$arg"; then
 	  pic_object=
 	  non_pic_object=
 
 	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
+	  func_source "$arg"
 
-	  if test -z "$pic_object" || \
+	  if test -z "$pic_object" ||
 	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
+	     test "$pic_object" = none &&
 	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "cannot find name of object for \`$arg'"
 	  fi
 
 	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
 
 	  if test "$pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
@@ -1859,7 +4830,7 @@ EOF
 	    fi
 
 	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
+	    func_append libobjs " $pic_object"
 	    arg="$pic_object"
 	  fi
 
@@ -1869,7 +4840,7 @@ EOF
 	    non_pic_object="$xdir$non_pic_object"
 
 	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
@@ -1877,28 +4848,22 @@ EOF
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
 	    non_pic_object="$pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	  fi
 	else
 	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit $EXIT_FAILURE
-	  else
-	    # Dry-run case.
-
+	  if $opt_dry_run; then
 	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
 	  fi
 	fi
 	;;
@@ -1931,70 +4896,51 @@ EOF
       *)
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
 	;;
       esac # arg
 
       # Now actually substitute the argument into the commands.
       if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
       fi
     done # argument parsing loop
 
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
 
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
     fi
 
     oldlibs=
     # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    func_basename "$output"
+    outputname="$func_basename_result"
     libobjs_save="$libobjs"
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
     # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $exit_status
-      fi
-    fi
+    func_mkdir_p "$output_objdir"
 
     # Determine the type of output
     case $output in
     "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_help "you must specify an output file"
       ;;
     *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;
@@ -2002,22 +4948,13 @@ EOF
     *) linkmode=prog ;; # Anything else should be a program.
     esac
 
-    case $host in
-    *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplications in $postdeps and $predeps
-      duplicate_compiler_generated_deps=yes
-      ;;
-    *)
-      duplicate_compiler_generated_deps=$duplicate_deps
-      ;;
-    esac
     specialdeplibs=
 
     libs=
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
+      if $opt_duplicate_deps ; then
 	case "$libs " in
 	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	esac
@@ -2032,7 +4969,7 @@ EOF
       # $postdeps and mark them as special (i.e., whose duplicates are
       # not to be eliminated).
       pre_post_deps=
-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+      if $opt_duplicate_compiler_generated_deps; then
 	for pre_post_dep in $predeps $postdeps; do
 	  case "$pre_post_deps " in
 	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
@@ -2048,15 +4985,16 @@ EOF
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
     case $linkmode in
     lib)
-	passes="conv link"
+	passes="conv dlpreopen link"
 	for file in $dlfiles $dlprefiles; do
 	  case $file in
 	  *.la) ;;
 	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
 	    ;;
 	  esac
 	done
@@ -2072,7 +5010,20 @@ EOF
     *)  passes="conv"
 	;;
     esac
+
     for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
       if test "$linkmode,$pass" = "lib,link" ||
 	 test "$linkmode,$pass" = "prog,scan"; then
 	libs="$deplibs"
@@ -2082,37 +5033,68 @@ EOF
 	case $pass in
 	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;
-	link)
-	  libs="$deplibs %DEPLIBS%"
-	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-	  ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  case $lib in
+	  *.la)	func_source "$lib" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) deplibs="$deplibs $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
       if test "$pass" = dlopen; then
 	# Collect dlpreopened libraries
 	save_deplibs="$deplibs"
 	deplibs=
       fi
+
       for deplib in $libs; do
 	lib=
 	found=no
 	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    compiler_flags="$compiler_flags $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
 	  fi
 	  continue
 	  ;;
 	-l*)
 	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    func_warning "\`-l' is ignored for archives/objects"
 	    continue
 	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
 	      lib="$searchdir/lib${name}${search_ext}"
@@ -2142,21 +5124,17 @@ EOF
 	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)
-		if (${SED} -e '2q' $lib |
-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		if func_lalib_p "$lib"; then
 		  library_names=
 		  old_library=
-		  case $lib in
-		  */* | *\\*) . $lib ;;
-		  *) . ./$lib ;;
-		  esac
+		  func_source "$lib"
 		  for l in $old_library $library_names; do
 		    ll="$l"
 		  done
 		  if test "X$ll" = "X$old_library" ; then # only static version available
 		    found=no
-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-		    test "X$ladir" = "X$lib" && ladir="."
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
 		    lib=$ladir/$old_library
 		    if test "$linkmode,$pass" = "prog,link"; then
 		      compile_deplibs="$deplib $compile_deplibs"
@@ -2168,19 +5146,35 @@ EOF
 		    continue
 		  fi
 		fi
-	        ;;
+		;;
 	      *) ;;
 	      esac
 	    fi
 	  fi
 	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
 	-L*)
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
 	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
 	    ;;
 	  prog)
 	    if test "$pass" = conv; then
@@ -2193,17 +5187,19 @@ EOF
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
 	    ;;
 	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    func_warning "\`-L' is ignored for archives/objects"
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
 	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    func_stripname '-R' '' "$deplib"
+	    dir=$func_stripname_result
 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
 	    *" $dir "*) ;;
@@ -2221,35 +5217,41 @@ EOF
 	  fi
 	  case $linkmode in
 	  lib)
-	    valid_a_lib=no
-	    case $deplibs_check_method in
-	      match_pattern*)
-		set dummy $deplibs_check_method
-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-		if eval $echo \"$deplib\" 2>/dev/null \
-		    | $SED 10q \
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		  valid_a_lib=yes
-		fi
+		    valid_a_lib=yes
+		  fi
 		;;
-	      pass_all)
-		valid_a_lib=yes
+		pass_all)
+		  valid_a_lib=yes
 		;;
-            esac
-	    if test "$valid_a_lib" != yes; then
-	      $echo
-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
-	      $echo "*** I have the capability to make that library automatically link in when"
-	      $echo "*** you link to this library.  But I can only do this if you have a"
-	      $echo "*** shared version of the library, which you do not appear to have"
-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
-	      $echo "*** that it is just a static archive that I should not used here."
-	    else
-	      $echo
-	      $echo "*** Warning: Linking the shared library $output against the"
-	      $echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		$ECHO
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
+		$ECHO "*** that it is just a static archive that I should not use here."
+	      else
+		$ECHO
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
 	    continue
 	    ;;
 	  prog)
@@ -2284,21 +5286,18 @@ EOF
 	  continue
 	  ;;
 	esac # case $deplib
+
 	if test "$found" = yes || test -f "$lib"; then :
 	else
-	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
 	fi
 
 	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
 
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
 
 	dlname=
 	dlopen=
@@ -2306,6 +5305,7 @@ EOF
 	libdir=
 	library_names=
 	old_library=
+	inherited_linker_flags=
 	# If the library was installed with an old release of libtool,
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
@@ -2314,11 +5314,19 @@ EOF
 
 
 	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
@@ -2331,26 +5339,24 @@ EOF
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit $EXIT_FAILURE
+	      func_fatal_error "cannot find name of link library for \`$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_duplicate_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
 	  continue
 	fi # $pass = conv
 
@@ -2361,15 +5367,13 @@ EOF
 	  linklib="$l"
 	done
 	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot find name of link library for \`$lib'"
 	fi
 
 	# This library was specified with -dlopen.
 	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
 	  fi
 	  if test -z "$dlname" ||
 	     test "$dlopen_support" != yes ||
@@ -2391,18 +5395,19 @@ EOF
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
 	    abs_ladir="$ladir"
 	  fi
 	  ;;
 	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	func_basename "$lib"
+	laname="$func_basename_result"
 
 	# Find the relevant object directory and library name.
 	if test "X$installed" = Xyes; then
 	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    func_warning "library \`$lib' was moved."
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    libdir="$abs_ladir"
@@ -2424,18 +5429,22 @@ EOF
 	    notinst_path="$notinst_path $abs_ladir"
 	  fi
 	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
 
 	# This library was specified with -dlpreopen.
 	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
 	  fi
 	  # Prefer using a static library (so that no silly _DYNAMIC symbols
 	  # are required to link).
 	  if test -n "$old_library"; then
 	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	    # Keep a list of preopened convenience libraries to check
+	    # that they are being used correctly in the link pass.
+	    test -z "$libdir" && \
+		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
 	  # Otherwise, use the dlname, so that lt_dlopen finds it.
 	  elif test -n "$dlname"; then
 	    newdlprefiles="$newdlprefiles $dir/$dlname"
@@ -2471,7 +5480,9 @@ EOF
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    -L*) func_stripname '-L' '' "$deplib"
+	         newlib_search_path="$newlib_search_path $func_stripname_result"
+		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
 	    if test "$linkalldeplibs" = yes; then
@@ -2481,7 +5492,7 @@ EOF
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
+	    if $opt_duplicate_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
@@ -2493,14 +5504,15 @@ EOF
 
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $absdir" ;;
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) temp_rpath="$temp_rpath$absdir:" ;;
 	      esac
 	    fi
 
@@ -2538,27 +5550,43 @@ EOF
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	if test "$use_static_libs" = built && test "$installed" = yes; then
 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
 	  # This is a shared library
 
-	  # Warn about portability, can't link against -module's on
-	  # some systems (darwin)
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
-	    $echo
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    $ECHO
 	    if test "$linkmode" = prog; then
-	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
-	    $echo "*** $linklib is not portable!"
+	    $ECHO "*** $linklib is not portable!"
 	  fi
 	  if test "$linkmode" = lib &&
 	     test "$hardcode_into_libs" = yes; then
@@ -2588,17 +5616,19 @@ EOF
 	  if test -n "$old_archive_from_expsyms_cmds"; then
 	    # figure out the soname
 	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
 	      soname="$dlname"
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw*)
-		major=`expr $current - $age`
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
 		versuffix="-$major"
 		;;
 	      esac
@@ -2609,36 +5639,22 @@ EOF
 
 	    # Make a new name for the extract_expsyms_cmds to use
 	    soroot="$soname"
-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$extract_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$old_archive_from_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
 	    fi
 	    # make sure the library variables are pointing to the new library
 	    dir=$output_objdir
@@ -2660,17 +5676,21 @@ EOF
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
 		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
-		    # it, someone is ignoring the new warnings I added
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
 		    if /usr/bin/file -L $add 2> /dev/null |
-                      $EGREP ": [^:]* bundle" >/dev/null ; then
-		      $echo "** Warning, lib $linklib is a module, not a shared library"
-		      if test -z "$old_library" ; then
-		        $echo
-		        $echo "** And there doesn't seem to be a static archive available"
-		        $echo "** The link will probably fail, sorry"
-		      else
-		        add="$dir/$old_library"
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  $ECHO
+			  $ECHO "*** And there doesn't seem to be a static archive available"
+			  $ECHO "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
 		      fi
 		    fi
 		esac
@@ -2688,7 +5708,8 @@ EOF
 	      fi
 	      ;;
 	    relink)
-	      if test "$hardcode_direct" = yes; then
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
 		add_dir="-L$dir"
@@ -2712,8 +5733,7 @@ EOF
 	    esac
 
 	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit $EXIT_FAILURE
+	      func_fatal_configuration "unsupported hardcode properties"
 	    fi
 
 	    if test -n "$add_shlibpath"; then
@@ -2728,8 +5748,8 @@ EOF
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
 		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
@@ -2744,7 +5764,8 @@ EOF
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
 	      add="$libdir/$linklib"
 	    elif test "$hardcode_minus_L" = yes; then
 	      add_dir="-L$libdir"
@@ -2758,9 +5779,9 @@ EOF
 	    elif test "$hardcode_automatic" = yes; then
 	      if test -n "$inst_prefix_dir" &&
 		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-	        add="$inst_prefix_dir$libdir/$linklib"
+		add="$inst_prefix_dir$libdir/$linklib"
 	      else
-	        add="$libdir/$linklib"
+		add="$libdir/$linklib"
 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
@@ -2804,21 +5825,21 @@ EOF
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    $echo
-	    $echo "*** Warning: This system can not link to static lib archive $lib."
-	    $echo "*** I have the capability to make that library automatically link in when"
-	    $echo "*** you link to this library.  But I can only do this if you have a"
-	    $echo "*** shared version of the library, which you do not appear to have."
+	    $ECHO
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    $ECHO "*** I have the capability to make that library automatically link in when"
+	    $ECHO "*** you link to this library.  But I can only do this if you have a"
+	    $ECHO "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      $echo "*** But as you try to build a module library, libtool will still create "
-	      $echo "*** a static module, that should work as long as the dlopening application"
-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      $ECHO "*** But as you try to build a module library, libtool will still create "
+	      $ECHO "*** a static module, that should work as long as the dlopening application"
+	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		$echo
-		$echo "*** However, this would only work if libtool was able to extract symbol"
-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$echo "*** not find such a program.  So, this module is probably useless."
-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		$ECHO
+		$ECHO "*** However, this would only work if libtool was able to extract symbol"
+		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$ECHO "*** not find such a program.  So, this module is probably useless."
+		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -2842,7 +5863,8 @@ EOF
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
 	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
 		   case " $xrpath " in
 		   *" $temp_xrpath "*) ;;
 		   *) xrpath="$xrpath $temp_xrpath";;
@@ -2860,7 +5882,7 @@ EOF
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
+	    if $opt_duplicate_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
@@ -2874,88 +5896,71 @@ EOF
 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
+	        func_dirname "$deplib" "" "."
+		dir="$func_dirname_result"
 		# We need an absolute path.
 		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    func_warning "cannot determine absolute directory name of \`$dir'"
 		    absdir="$dir"
 		  fi
 		  ;;
 		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="$absdir"
-		fi
-		depdepl=
+		if $GREP "^installed=no" $deplib > /dev/null; then
 		case $host in
 		*-*-darwin*)
-		  # we do not want to link against static libs,
-		  # but need to link against shared
+		  depdepl=
 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$path/$depdepl" ; then
-		      depdepl="$path/$depdepl"
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
 		    fi
-		    # do not add paths which are already there
-		    case " $newlib_search_path " in
-		    *" $path "*) ;;
-		    *) newlib_search_path="$newlib_search_path $path";;
-		    esac
 		  fi
-		  path=""
 		  ;;
 		*)
-		  path="-L$path"
+		  path="-L$absdir/$objdir"
 		  ;;
 		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
 		;;
-	      -l*)
-		case $host in
-		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
-		  ;;
-		*) continue ;;
-		esac
-		;;
-	      *) continue ;;
 	      esac
 	      case " $deplibs " in
 	      *" $path "*) ;;
 	      *) deplibs="$path $deplibs" ;;
 	      esac
-	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
 	    done
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
       dependency_libs="$newdependency_libs"
       if test "$pass" = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
@@ -3054,38 +6059,36 @@ EOF
     done # for pass
     if test "$linkmode" = prog; then
       dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
       dlprefiles="$newdlprefiles"
     fi
 
     case $linkmode in
     oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+	func_warning "\`-dlopen' is ignored for archives"
       fi
 
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
 
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
 
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
-      fi
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
 
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
@@ -3097,48 +6100,48 @@ EOF
       # Make sure we only generate libraries of the form `libNAME.la'.
       case $outputname in
       lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
 	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
       *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
 	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
 	fi
 	;;
       esac
 
       if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
-	  $echo
-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  $echo "*** objects $objs is not portable!"
+	  $ECHO
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
 	  libobjs="$libobjs $objs"
 	fi
       fi
 
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
 
       set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
 
       oldlibs=
       if test -z "$rpath"; then
@@ -3152,25 +6155,21 @@ EOF
 	  build_old_libs=yes
 	fi
 
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
-	fi
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
 
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
       else
 
 	# Parse the version information argument.
 	save_ifs="$IFS"; IFS=':'
 	set dummy $vinfo 0 0 0
+	shift
 	IFS="$save_ifs"
 
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
@@ -3178,9 +6177,9 @@ EOF
 
 	case $vinfo_number in
 	yes)
-	  number_major="$2"
-	  number_minor="$3"
-	  number_revision="$4"
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
@@ -3189,8 +6188,9 @@ EOF
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
-	  darwin|linux|osf|windows)
-	    current=`expr $number_major + $number_minor`
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
@@ -3200,21 +6200,18 @@ EOF
 	    age="0"
 	    ;;
 	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor - 1`
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_minor"
-	    ;;
-	  *)
-	    $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	    $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	    exit $EXIT_FAILURE
+	    lt_irix_increment=no
 	    ;;
 	  esac
 	  ;;
 	no)
-	  current="$2"
-	  revision="$3"
-	  age="$4"
+	  current="$1"
+	  revision="$2"
+	  age="$3"
 	  ;;
 	esac
 
@@ -3222,34 +6219,30 @@ EOF
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	fi
 
 	# Calculate the version variables.
@@ -3262,11 +6255,14 @@ EOF
 	darwin)
 	  # Like Linux, but with the current version available in
 	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
 	  ;;
 
 	freebsd-aout)
@@ -3276,11 +6272,16 @@ EOF
 
 	freebsd-elf)
 	  major=".$current"
-	  versuffix=".$current";
+	  versuffix=".$current"
 	  ;;
 
 	irix | nonstopux)
-	  major=`expr $current - $age + 1`
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
 
 	  case $version_type in
 	    nonstopux) verstring_prefix=nonstopux ;;
@@ -3291,8 +6292,10 @@ EOF
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
 	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 
@@ -3302,20 +6305,24 @@ EOF
 	  ;;
 
 	linux)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  ;;
 
 	osf)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
 	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring:${iface}.0"
 	  done
 
@@ -3323,6 +6330,11 @@ EOF
 	  verstring="$verstring:${current}.0"
 	  ;;
 
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
 	sunos)
 	  major=".$current"
 	  versuffix=".$current.$revision"
@@ -3331,14 +6343,13 @@ EOF
 	windows)
 	  # Use '-' rather than '.', since we only want one
 	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
+	  func_arith $current - $age
+	  major=$func_arith_result
 	  versuffix="-$major"
 	  ;;
 
 	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_configuration "unknown library version type \`$version_type'"
 	  ;;
 	esac
 
@@ -3372,7 +6383,7 @@ EOF
 	# Check to see if the archive will have undefined symbols.
 	if test "$allow_undefined" = yes; then
 	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    func_warning "undefined symbols not allowed in $host shared libraries"
 	    build_libtool_libs=no
 	    build_old_libs=yes
 	  fi
@@ -3380,21 +6391,26 @@ EOF
 	  # Don't allow undefined symbols.
 	  allow_undefined_flag="$no_undefined_flag"
 	fi
+
       fi
 
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      libobjs="$libobjs $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
       if test "$mode" != relink; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
-	tempremovelist=`$echo "$output_objdir/*"`
+	tempremovelist=`$ECHO "$output_objdir/*"`
 	for p in $tempremovelist; do
 	  case $p in
-	    *.$objext)
+	    *.$objext | *.gcno)
 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
 		   continue
 		 fi
 	       fi
@@ -3403,10 +6419,8 @@ EOF
 	    *) ;;
 	  esac
 	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
       fi
 
       # Now set the variables for building old libraries.
@@ -3414,15 +6428,15 @@ EOF
 	oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-      done
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+      #done
 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
@@ -3462,12 +6476,12 @@ EOF
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
+	    deplibs="$deplibs System.ltframework"
 	    ;;
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
@@ -3481,7 +6495,7 @@ EOF
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
 	    ;;
- 	  *)
+	  *)
 	    # Add libc to deplibs on all other systems if necessary.
 	    if test "$build_libtool_need_lc" = "yes"; then
 	      deplibs="$deplibs -lc"
@@ -3518,18 +6532,18 @@ EOF
 	  # limits. Maybe even breaks it.  We compile a program, linking it
 	  # against the deplibs as a proxy for the library.  Then we can check
 	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
+	  $opt_dry_run || $RM conftest.c
 	  cat > conftest.c <<EOF
 	  int main() { return 0; }
 EOF
-	  $rm conftest
-	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" -ne "0"; then
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
@@ -3537,40 +6551,41 @@ EOF
 		    i=""
 		    ;;
 		  esac
-	        fi
+		fi
 		if test -n "$i" ; then
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		    newdeplibs="$newdeplibs $i"
 		  else
 		    droppeddeps=yes
-		    $echo
-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
-		    $echo "*** I have the capability to make that library automatically link in when"
-		    $echo "*** you link to this library.  But I can only do this if you have a"
-		    $echo "*** shared version of the library, which I believe you do not have"
-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		    $ECHO
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    $ECHO "*** I have the capability to make that library automatically link in when"
+		    $ECHO "*** you link to this library.  But I can only do this if you have a"
+		    $ECHO "*** shared version of the library, which I believe you do not have"
+		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  else
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
-		$LTCC $LTCFLAGS -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
@@ -3581,44 +6596,47 @@ EOF
 		    esac
 		  fi
 		  if test -n "$i" ; then
-		    libname=`eval \\$echo \"$libname_spec\"`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		    set dummy $deplib_matches
-		    deplib_match=$2
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		      newdeplibs="$newdeplibs $i"
 		    else
 		      droppeddeps=yes
-		      $echo
-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
-		      $echo "*** I have the capability to make that library automatically link in when"
-		      $echo "*** you link to this library.  But I can only do this if you have a"
-		      $echo "*** shared version of the library, which you do not appear to have"
-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      $ECHO
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      $ECHO "*** I have the capability to make that library automatically link in when"
+		      $ECHO "*** you link to this library.  But I can only do this if you have a"
+		      $ECHO "*** shared version of the library, which you do not appear to have"
+		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  $echo
-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "***  make it link in!  You will probably need to install it or some"
-		  $echo "*** library that it depends on before this library will be fully"
-		  $echo "*** functional.  Installing it before continuing would be even better."
+		  $ECHO
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $ECHO "*** make it link in!  You will probably need to install it or some"
+		  $ECHO "*** library that it depends on before this library will be fully"
+		  $ECHO "*** functional.  Installing it before continuing would be even better."
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  fi
 	  ;;
 	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-            if test "$name" != "" && test  "$name" != "0"; then
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
@@ -3628,13 +6646,13 @@ EOF
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
+		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
 			continue
 		      fi
 		      # The statement above tries to avoid entering an
@@ -3647,12 +6665,12 @@ EOF
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | $EGREP "$file_magic_regex" > /dev/null; then
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
 			newdeplibs="$newdeplibs $a_deplib"
 			a_deplib=""
 			break 2
@@ -3662,32 +6680,35 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
+		$ECHO
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a file magic. Last file checked: $potlib"
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
@@ -3697,14 +6718,13 @@ EOF
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
+		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval $echo \"$potent_lib\" 2>/dev/null \
-		        | ${SED} 10q \
-		        | $EGREP "$match_pattern_regex" > /dev/null; then
+		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      newdeplibs="$newdeplibs $a_deplib"
 		      a_deplib=""
 		      break 2
@@ -3714,44 +6734,46 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
+		$ECHO
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	    -e 's/ -[LR][^ ]*//g'`
+	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
 	    done
 	  fi
-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
-	    | grep . >/dev/null; then
-	    $echo
+	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
+	     $GREP . >/dev/null; then
+	    $ECHO
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    $echo "*** All declared inter-library dependencies are being dropped."
+	    $ECHO "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
 	  fi
 	  ;;
@@ -3764,24 +6786,24 @@ EOF
 
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    $echo
-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $echo "*** a static module, that should work as long as the dlopening"
-	    $echo "*** application is linked with the -dlopen flag."
+	    $ECHO
+	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $ECHO "*** a static module, that should work as long as the dlopening"
+	    $ECHO "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      $echo
-	      $echo "*** However, this would only work if libtool was able to extract symbol"
-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $echo "*** not find such a program.  So, this module is probably useless."
-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      $ECHO
+	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
+	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $ECHO "*** not find such a program.  So, this module is probably useless."
+	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -3791,16 +6813,16 @@ EOF
 	      build_libtool_libs=no
 	    fi
 	  else
-	    $echo "*** The inter-library dependencies that have been dropped here will be"
-	    $echo "*** automatically added whenever a program is linked with this library"
-	    $echo "*** or is declared to -dlopen it."
+	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
+	    $ECHO "*** automatically added whenever a program is linked with this library"
+	    $ECHO "*** or is declared to -dlopen it."
 
 	    if test "$allow_undefined" = no; then
-	      $echo
-	      $echo "*** Since this library must not contain undefined symbols,"
-	      $echo "*** because either the platform does not support them or"
-	      $echo "*** it was explicitly requested with -no-undefined,"
-	      $echo "*** libtool will only create a static version of it."
+	      $ECHO
+	      $ECHO "*** Since this library must not contain undefined symbols,"
+	      $ECHO "*** because either the platform does not support them or"
+	      $ECHO "*** it was explicitly requested with -no-undefined,"
+	      $ECHO "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -3814,7 +6836,14 @@ EOF
 	# Done checking deplibs!
 	deplibs=$newdeplibs
       fi
-
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
 
       # move library search paths that coincide with paths to not yet
       # installed libraries to the beginning of the library search list
@@ -3843,7 +6872,6 @@ EOF
       done
       deplibs="$new_libs"
 
-
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
@@ -3914,8 +6942,9 @@ EOF
 	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
-	realname="$2"
-	shift; shift
+	shift
+	realname="$1"
+	shift
 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
@@ -3934,71 +6963,122 @@ EOF
 	done
 
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  delfiles="$delfiles $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
 
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
 	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
+	    func_verbose "generating symbol list for \`$libname.la'"
 	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
+	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
 	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	        $show "$cmd"
-	        $run eval "$cmd" || exit $?
-	        skipped_export=false
+	      func_len " $cmd"
+	      len=$func_len_result
+	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
 	      else
-	        # The command line is too long to execute in one step.
-	        $show "using reloadable object file for export list..."
-	        skipped_export=:
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
 		# Break out early, otherwise skipped_export may be
 		# set to false by a later but shorter cmd.
 		break
 	      fi
 	    done
 	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
 	  fi
 	fi
 
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	fi
 
 	tmp_deplibs=
 	for test_deplib in $deplibs; do
-		case " $convenience " in
-		*" $test_deplib "*) ;;
-		*)
-			tmp_deplibs="$tmp_deplibs $test_deplib"
-			;;
-		esac
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    tmp_deplibs="$tmp_deplibs $test_deplib"
+	    ;;
+	  esac
 	done
 	deplibs="$tmp_deplibs"
 
 	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
 	  if test -n "$whole_archive_flag_spec"; then
 	    save_libobjs=$libobjs
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
 	  else
 	    gentop="$output_objdir/${outputname}x"
 	    generated="$generated $gentop"
 
 	    func_extract_archives $gentop $convenience
 	    libobjs="$libobjs $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	fi
-	
+
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
@@ -4006,7 +7086,7 @@ EOF
 
 	# Make a backup of the uninstalled library when relinking
 	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
 	# Do each of the archive commands.
@@ -4019,22 +7099,24 @@ EOF
 	    cmds=$module_cmds
 	  fi
 	else
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval test_cmds=\"$archive_expsym_cmds\"
-	  cmds=$archive_expsym_cmds
-	else
-	  eval test_cmds=\"$archive_cmds\"
-	  cmds=$archive_cmds
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
 	  fi
 	fi
 
 	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  :
 	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
 
 	  # Save the value of $output and $libobjs because we want to
 	  # use them later.  If we have whole_archive_flag_spec, we
@@ -4048,77 +7130,162 @@ EOF
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
 	  test_cmds=
 	  concat_cmds=
 	  objlist=
-	  delfiles=
 	  last_robj=
 	  k=1
-	  output=$output_objdir/$output_la-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    $ECHO 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      $ECHO "$obj" >> $output
+	    done
+	    $ECHO ')' >> $output
+	    delfiles="$delfiles $output"
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      $ECHO "$obj" >> $output
+	    done
+	    delfiles="$delfiles $output"
+	    output=$firstobj\"$file_list_spec$output\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=$obj
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      delfiles="$delfiles $output"
+
 	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
-	      last_robj=$output_objdir/$output_la-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$output_la-${k}.$objext
-	      objlist=$obj
-	      len=1
 	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
-	  if ${skipped_export-false}; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    libobjs=$output
-	    # Append the command to create the export file.
-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-          fi
-
-	  # Set up a command to remove the reloadable object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
-	  done
 
-	  $echo "creating a temporary reloadable object file: $output"
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
 
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
+		exit $lt_exit
+	      }
+	    done
 	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
 
 	  libobjs=$output
 	  # Restore the value of output.
@@ -4126,6 +7293,7 @@ EOF
 
 	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	  # Expand the library linking commands again to reset the
 	  # value of $libobjs for piecewise linking.
@@ -4138,28 +7306,45 @@ EOF
 	      cmds=$module_cmds
 	    fi
 	  else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    cmds=$archive_expsym_cmds
-	  else
-	    cmds=$archive_cmds
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
 	    fi
 	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
 
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~\$rm $delfiles\"
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  libobjs="$libobjs $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
 	fi
+
 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
 	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || {
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
 	    if test "$mode" = relink; then
-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
 	    fi
 
 	    exit $lt_exit
@@ -4169,12 +7354,11 @@ EOF
 
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
 	    if test -z "$whole_archive_flag_spec"; then
-	      $show "${rm}r $gentop"
-	      $run ${rm}r "$gentop"
+	      func_show_eval '${RM}r "$gentop"'
 	    fi
 	  fi
 
@@ -4184,8 +7368,7 @@ EOF
 	# Create links to the real library.
 	for linkname in $linknames; do
 	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
 	  fi
 	done
 
@@ -4198,38 +7381,35 @@ EOF
       ;;
 
     obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+	func_warning "\`-dlopen' is ignored for objects"
       fi
 
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
 
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
 
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
 
       case $output in
       *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
 	;;
       *)
 	libobj=
@@ -4238,7 +7418,7 @@ EOF
       esac
 
       # Delete the old objects.
-      $run $rm $obj $libobj
+      $opt_dry_run || $RM $obj $libobj
 
       # Objects from convenience libraries.  This assumes
       # single-version convenience libraries.  Whenever we create
@@ -4247,12 +7427,14 @@ EOF
       reload_conv_objs=
       gentop=
       # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
       wl=
 
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -4263,24 +7445,15 @@ EOF
       fi
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
-      cmds=$reload_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
+      func_execute_cmds "$reload_cmds" 'exit $?'
 
       # Exit if we aren't doing a library object file.
       if test -z "$libobj"; then
 	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
+	  func_show_eval '${RM}r "$gentop"'
 	fi
 
 	exit $EXIT_SUCCESS
@@ -4288,14 +7461,13 @@ EOF
 
       if test "$build_libtool_libs" != yes; then
 	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
+	  func_show_eval '${RM}r "$gentop"'
 	fi
 
 	# Create an invalid libtool object if no PIC, so that we don't
 	# accidentally link it into a program.
 	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 	exit $EXIT_SUCCESS
       fi
 
@@ -4303,20 +7475,11 @@ EOF
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
 	output="$libobj"
-	cmds=$reload_cmds
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
+	func_execute_cmds "$reload_cmds" 'exit $?'
       fi
 
       if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
+	func_show_eval '${RM}r "$gentop"'
       fi
 
       exit $EXIT_SUCCESS
@@ -4324,39 +7487,45 @@ EOF
 
     prog)
       case $host in
-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
       esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
 
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
 
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	;;
       esac
 
       case $host in
-      *darwin*)
-        # Don't allow lazy linking, it breaks C++ global constructors
-        if test "$tagname" = CXX ; then
-        compile_command="$compile_command ${wl}-bind_at_load"
-        finalize_command="$finalize_command ${wl}-bind_at_load"
-        fi
-        ;;
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      compile_command="$compile_command ${wl}-bind_at_load"
+	      finalize_command="$finalize_command ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
       esac
 
 
@@ -4431,14 +7600,16 @@ EOF
 	  esac
 	fi
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -4490,281 +7661,51 @@ EOF
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
+	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
       fi
 
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
 
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$outputname.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    else
-	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval '$echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
-	    case $host in
-	    *cygwin* | *mingw* )
-	  $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs */
-struct {
-"
-	      ;;
-	    * )
-	  $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-	      ;;
-	    esac
-
-
-	  $echo >> "$output_objdir/$dlsyms" "\
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-          case $host in
-          *cygwin* | *mingw* )
-            if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-            else
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-             fi
-            ;;
-          * )
-            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-            ;;
-          esac
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
       fi
 
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+      wrappers_required=yes
+      case $host in
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
 	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	exit_status=$?
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
 
 	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
 	fi
 
 	exit $exit_status
       fi
 
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
       if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
       fi
@@ -4797,12 +7738,11 @@ static const void *lt_preloaded_setup() {
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
-	$run $rm $output
+	$opt_dry_run || $RM $output
 	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
+	func_show_eval "$link_command" 'exit $?'
 	exit $EXIT_SUCCESS
       fi
 
@@ -4811,13 +7751,13 @@ static const void *lt_preloaded_setup() {
 	link_command="$compile_var$compile_command$compile_rpath"
 	relink_command="$finalize_var$finalize_command$finalize_rpath"
 
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
       else
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -4829,594 +7769,103 @@ static const void *lt_preloaded_setup() {
       fi
 
       # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
+      func_show_eval "$link_command" 'exit $?'
 
       # Now create the wrapper script.
-      $show "creating $output"
+      func_verbose "creating $output"
 
       # Quote the relink command for shipping.
       if test -n "$relink_command"; then
 	# Preserve any variables that may affect compiler behavior
 	for var in $variables_saved_for_relink; do
 	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 	  elif eval var_value=\$$var; test -z "$var_value"; then
 	    relink_command="$var=; export $var; $relink_command"
 	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       fi
 
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+      # Quote $ECHO for shipping.
+      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
 	case $progpath in
 	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
 	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
       else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
       fi
 
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
 	# win32 will think the script is a binary if it has
 	# a .exe suffix, so we strip it off here.
 	case $output in
-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
 	esac
 	# test for cygwin because mv fails w/o .exe extensions
 	case $host in
 	  *cygwin*)
 	    exeext=.exe
-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
 	  *) exeext= ;;
 	esac
 	case $host in
 	  *cygwin* | *mingw* )
-            output_name=`basename $output`
-            output_path=`dirname $output`
-            cwrappersource="$output_path/$objdir/lt-$output_name.c"
-            cwrapper="$output_path/$output_name.exe"
-            $rm $cwrappersource $cwrapper
-            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-	    cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS.  */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int    check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
-  DEBUG("(main) program_name : %s\n",program_name);
-  newargz = XMALLOC(char *, argc+2);
-EOF
-
-            cat >> $cwrappersource <<EOF
-  newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
-            cat >> $cwrappersource <<"EOF"
-  newargz[1] = find_executable(argv[0]);
-  if (newargz[1] == NULL)
-    lt_fatal("Couldn't find %s", argv[0]);
-  DEBUG("(main) found exe at : %s\n",newargz[1]);
-  /* we know the script has the same name, without the .exe */
-  /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
-  for (i = 1; i < argc; i++)
-    newargz[i+1] = xstrdup(argv[i]);
-  newargz[argc+1] = NULL;
-
-  for (i=0; i<argc+1; i++)
-  {
-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
-    ;
-  }
-
-EOF
-
-            case $host_os in
-              mingw*)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",(char const **)newargz);
-EOF
-              ;;
-              *)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",newargz);
-EOF
-              ;;
-            esac
-
-            cat >> $cwrappersource <<"EOF"
-  return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
-  void * p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable(const char * path)
-{
-  struct stat st;
-
-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0) &&
-      (
-        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
-       ((st.st_mode & S_IXUSR) == S_IXUSR))
-      )
-    return 1;
-  else
-    return 0;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
-  int has_slash = 0;
-  const char* p;
-  const char* p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char* concat_name;
-
-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-  {
-    concat_name = xstrdup (wrapper);
-    if (check_executable(concat_name))
-      return concat_name;
-    XFREE(concat_name);
-  }
-  else
-  {
-#endif
-    if (IS_DIR_SEPARATOR (wrapper[0]))
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable(concat_name))
-        return concat_name;
-      XFREE(concat_name);
-    }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-    {
-      has_slash = 1;
-      break;
-    }
-  if (!has_slash)
-  {
-    /* no slashes; search PATH */
-    const char* path = getenv ("PATH");
-    if (path != NULL)
-    {
-      for (p = path; *p; p = p_next)
-      {
-        const char* q;
-        size_t p_len;
-        for (q = p; *q; q++)
-          if (IS_PATH_SEPARATOR(*q))
-            break;
-        p_len = q - p;
-        p_next = (*q == '\0' ? q : q + 1);
-        if (p_len == 0)
-        {
-          /* empty path: current directory */
-          if (getcwd (tmp, LT_PATHMAX) == NULL)
-            lt_fatal ("getcwd failed");
-          tmp_len = strlen(tmp);
-          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, tmp, tmp_len);
-          concat_name[tmp_len] = '/';
-          strcpy (concat_name + tmp_len + 1, wrapper);
-        }
-        else
-        {
-          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, p, p_len);
-          concat_name[p_len] = '/';
-          strcpy (concat_name + p_len + 1, wrapper);
-        }
-        if (check_executable(concat_name))
-          return concat_name;
-        XFREE(concat_name);
-      }
-    }
-    /* not found in PATH; assume curdir */
-  }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen(tmp);
-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable(concat_name))
-    return concat_name;
-  XFREE(concat_name);
-  return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert(str != NULL);
-  assert(pat != NULL);
-
-  len = strlen(str);
-  patlen = strlen(pat);
-
-  if (patlen <= len)
-  {
-    str += len - patlen;
-    if (strcmp(str, pat) == 0)
-      *str = '\0';
-  }
-  return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
-          const char * message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-EOF
-          # we should really use a build-platform specific compiler
-          # here, but OTOH, the wrappers (shell script and this C one)
-          # are only useful if you want to execute the "real" binary.
-          # Since the "real" binary is built for $host, then this
-          # wrapper might as well be built for $host, too.
-          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-          ;;
-        esac
-        $rm $output
-        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  $echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  $echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
 
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
 	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
 
-	*)
-	  $echo >> $output "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
+	    func_emit_wrapper no > $output
+	    chmod +x $output
 	  ;;
 	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit $EXIT_FAILURE
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi\
-"
-	chmod +x $output
-      fi
+      }
       exit $EXIT_SUCCESS
       ;;
     esac
@@ -5425,7 +7874,7 @@ fi\
     for oldlib in $oldlibs; do
 
       if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
+	oldobjs="$libobjs_save $symfileobj"
 	addlibs="$convenience"
 	build_libtool_libs=no
       else
@@ -5434,6 +7883,9 @@ fi\
 	  build_libtool_libs=no
 	else
 	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    oldobjs="$oldobjs $symfileobj"
+	  fi
 	fi
 	addlibs="$old_convenience"
       fi
@@ -5448,8 +7900,18 @@ fi\
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-       cmds=$old_archive_from_new_cmds
+	cmds=$old_archive_from_new_cmds
       else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  oldobjs="$oldobjs $func_extract_archives_result"
+	fi
+
 	# POSIX demands no paths to be encoded in archives.  We have
 	# to avoid creating archives with duplicate basenames if we
 	# might have to extract them afterwards, e.g., when creating a
@@ -5458,32 +7920,22 @@ fi\
 	# not supported by libtool).
 	if (for obj in $oldobjs
 	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  $echo "copying selected object files to avoid basename conflicts..."
-
-	  if test -z "$gentop"; then
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    exit_status=$?
-	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-	      exit $exit_status
-	    fi
-	  fi
-
+	  $ECHO "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
 	  oldobjs=
 	  counter=1
 	  for obj in $save_oldobjs
 	  do
-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *[\ /]"$objbase "*)
@@ -5491,58 +7943,62 @@ fi\
 		# Make sure we don't pick an alternate name that also
 		# overlaps.
 		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
+		func_arith $counter + 1
+		counter=$func_arith_result
 		case " $oldobjs " in
 		*[\ /]"$newobj "*) ;;
 		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
 		esac
 	      done
-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      $run ln "$obj" "$gentop/$newobj" ||
-	      $run cp "$obj" "$gentop/$newobj"
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
 	      oldobjs="$oldobjs $gentop/$newobj"
 	      ;;
 	    *) oldobjs="$oldobjs $obj" ;;
 	    esac
 	  done
 	fi
-
 	eval cmds=\"$old_archive_cmds\"
 
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
+	  func_verbose "using piecewise archive linking..."
 	  save_RANLIB=$RANLIB
 	  RANLIB=:
 	  objlist=
 	  concat_cmds=
 	  save_oldobjs=$oldobjs
-
+	  oldobjs=
 	  # Is there a better way of finding the last object in the list?
 	  for obj in $save_oldobjs
 	  do
 	    last_oldobj=$obj
 	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
 	  for obj in $save_oldobjs
 	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	       test "$len" -le "$max_cmd_len"; then
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
 	      :
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
 	      if test "$obj" = "$last_oldobj" ; then
-	        RANLIB=$save_RANLIB
+		RANLIB=$save_RANLIB
 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=
+	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
@@ -5554,49 +8010,39 @@ fi\
 	  fi
 	fi
       fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-        eval cmd=\"$cmd\"
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
+      func_execute_cmds "$cmds" 'exit $?'
     done
 
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
 
     # Now create the libtool archive.
     case $output in
     *.la)
       old_library=
       test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
+      func_verbose "creating $output"
 
       # Preserve any variables that may affect compiler behavior
       for var in $variables_saved_for_relink; do
 	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 	elif eval var_value=\$$var; test -z "$var_value"; then
 	  relink_command="$var=; export $var; $relink_command"
 	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	fi
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
 
-
       # Only create the output if not a dry run.
-      if test -z "$run"; then
+      $opt_dry_run || {
 	for installed in no yes; do
 	  if test "$installed" = yes; then
 	    if test -z "$install_libdir"; then
@@ -5608,12 +8054,11 @@ fi\
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		func_basename "$deplib"
+		name="$func_basename_result"
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit $EXIT_FAILURE
-		fi
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
 		newdependency_libs="$newdependency_libs $libdir/$name"
 		;;
 	      *) newdependency_libs="$newdependency_libs $deplib" ;;
@@ -5621,25 +8066,37 @@ fi\
 	    done
 	    dependency_libs="$newdependency_libs"
 	    newdlfiles=
+
 	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlfiles="$newdlfiles $libdir/$name"
+		;;
+	      *) newdlfiles="$newdlfiles $lib" ;;
+	      esac
 	    done
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlprefiles="$newdlprefiles $libdir/$name"
+		;;
+	      esac
 	    done
 	    dlprefiles="$newdlprefiles"
 	  else
@@ -5662,15 +8119,15 @@ fi\
 	    done
 	    dlprefiles="$newdlprefiles"
 	  fi
-	  $rm $output
+	  $RM $output
 	  # place dlname in correct position for cygwin
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
-	  $echo > $output "\
+	  $ECHO > $output "\
 # $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -5684,9 +8141,15 @@ library_names='$library_names'
 # The name of the static archive.
 old_library='$old_library'
 
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
 # Libraries that this one depends upon.
 dependency_libs='$dependency_libs'
 
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
 # Version information for $libname.
 current=$current
 age=$age
@@ -5705,746 +8168,29 @@ dlpreopen='$dlprefiles'
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
 	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $echo >> $output "\
+	    $ECHO >> $output "\
 relink_command=\"$relink_command\""
 	  fi
 	done
-      fi
+      }
 
       # Do a symbolic link so that the libtool archive can be found in
       # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
       ;;
     esac
     exit $EXIT_SUCCESS
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) 
-      	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
-      -g | -m | -o) prev=$arg ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  if test "$inst_prefix_dir" = "$destdir"; then
-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-	  else
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
-	  fi
-
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  cmds=$postinstall_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || {
-	      lt_exit=$?
-
-	      # Restore the uninstalled library and exit
-	      if test "$mode" = relink; then
-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	      fi
-
-	      exit $lt_exit
-	    }
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      file=`$echo $file|${SED} 's,.exe$,,'`
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir=`func_mktempdir`
-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway 
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      cmds=$old_postinstall_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  cmds=$finish_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = : && exit $EXIT_SUCCESS
-
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    $echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $echo "   $libdir"
-    done
-    $echo
-    $echo "If you ever happen to want to link against installed libraries"
-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $echo
-    $echo "See any operating system documentation about shared libraries for"
-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit $EXIT_FAILURE
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
+}
 
-      # Restore saved environment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
+{ test "$mode" = link || test "$mode" = relink; } &&
+    func_mode_link ${1+"$@"}
 
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-    ;;
 
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
     files=
     rmforce=
     exit_status=0
@@ -6456,30 +8202,28 @@ relink_command=\"$relink_command\""
     for arg
     do
       case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
+      -f) RM="$RM $arg"; rmforce=yes ;;
+      -*) RM="$RM $arg" ;;
       *) files="$files $arg" ;;
       esac
     done
 
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
 
     rmdirs=
 
     origobjdir="$objdir"
     for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
 	objdir="$origobjdir"
       else
 	objdir="$dir/$origobjdir"
       fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      func_basename "$file"
+      name="$func_basename_result"
       test "$mode" = uninstall && objdir="$dir"
 
       # Remember objdir for removal later, being careful to avoid duplicates
@@ -6491,9 +8235,9 @@ relink_command=\"$relink_command\""
       fi
 
       # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
 	:
       elif test -d "$file"; then
 	exit_status=1
@@ -6507,8 +8251,8 @@ relink_command=\"$relink_command\""
       case $name in
       *.la)
 	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
 
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
@@ -6523,39 +8267,17 @@ relink_command=\"$relink_command\""
 	    *" $dlname "*) ;;
 	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
 	    esac
-	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 	    ;;
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      cmds=$postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      cmds=$old_postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
@@ -6565,20 +8287,20 @@ relink_command=\"$relink_command\""
 
       *.lo)
 	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_p "$file"; then
 
 	  # Read the .lo file
-	  . $dir/$name
+	  func_source $dir/$name
 
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$non_pic_object"
 	  fi
 	fi
@@ -6589,17 +8311,26 @@ relink_command=\"$relink_command\""
 	  noexename=$name
 	  case $file in
 	  *.exe)
-	    file=`$echo $file|${SED} 's,.exe$,,'`
-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
 	    # $file with .exe has already been added to rmfiles,
 	    # add $file without .exe
 	    rmfiles="$rmfiles $file"
 	    ;;
 	  esac
 	  # Do a test to see if this is a libtool program.
-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	    relink_command=
-	    . $dir/$noexename
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
@@ -6614,237 +8345,38 @@ relink_command=\"$relink_command\""
 	fi
 	;;
       esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
     objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
       fi
     done
 
     exit $exit_status
-    ;;
+}
 
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-  esac
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
 
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi # test -z "$show_help"
+test -z "$mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$mode'"
 
 if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
+  eval exec "$exec_cmd"
   exit $EXIT_FAILURE
 fi
 
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
-  exit $EXIT_SUCCESS
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
+exit $exit_status
 
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-  ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
@@ -6858,14 +8390,17 @@ exit $?
 # configuration.  But we'll never go from static-only to shared-only.
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
+build_libtool_libs=no
+build_old_libs=yes
 # ### END LIBTOOL TAG CONFIG: disable-shared
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 # ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
 # mode:shell-script
 # sh-indentation:2
 # End:
+# vi:sw=2
+
diff --git a/libfontenc/missing b/libfontenc/missing
index 894e786e1..1c8ff7049 100644
--- a/libfontenc/missing
+++ b/libfontenc/missing
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2005-06-08.21
+scriptversion=2006-05-10.23
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
 #   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
@@ -33,6 +33,8 @@ if test $# -eq 0; then
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -44,7 +46,7 @@ fi
 
 msg="missing on your system"
 
-case "$1" in
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -77,6 +79,7 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -106,7 +109,7 @@ esac
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
 # the program).
-case "$1" in
+case $1 in
   lex|yacc)
     # Not GNU programs, they don't have --version.
     ;;
@@ -135,7 +138,7 @@ esac
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case "$1" in
+case $1 in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -164,7 +167,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -192,8 +195,8 @@ WARNING: \`$1' is needed, but is $msg.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -214,25 +217,25 @@ WARNING: \`$1' $msg.  You should only need it if
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
@@ -244,18 +247,18 @@ WARNING: \`$1' is $msg.  You should only need it if
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
@@ -267,11 +270,9 @@ WARNING: \`$1' is $msg.  You should only need it if
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
 	touch $file
     else
 	test -z "$file" || exec >$file
@@ -289,11 +290,17 @@ WARNING: \`$1' is $msg.  You should only need it if
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
     # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
       # ... or it is the one specified with @setfilename ...
       infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
       # ... or it is derived from the source name (dir/f.texi becomes f.info)
       test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
@@ -317,13 +324,13 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
diff --git a/libfontenc/src/Makefile.am b/libfontenc/src/Makefile.am
index 3c6c3f6e5..8cd09112d 100644
--- a/libfontenc/src/Makefile.am
+++ b/libfontenc/src/Makefile.am
@@ -5,6 +5,8 @@ libfontenc_la_SOURCES = \
          fontenc.c \
 	 fontencI.h
 
+AM_CFLAGS = @FONTENC_CFLAGS@
+
 FONTENCDIR=@ENCODINGSDIR@
 FONTENCDEFS = -DFONT_ENCODINGS_DIRECTORY=\"$(FONTENCDIR)/encodings.dir\"
 
diff --git a/libfontenc/src/Makefile.in b/libfontenc/src/Makefile.in
index 607681d37..e299702c5 100644
--- a/libfontenc/src/Makefile.in
+++ b/libfontenc/src/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,15 +16,12 @@
 @SET_MAKE@
 
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -47,45 +45,75 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(libdir)" \
 	"$(DESTDIR)$(libfontencincludedir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(lib_LTLIBRARIES)
 libfontenc_la_DEPENDENCIES =
 am_libfontenc_la_OBJECTS = encparse.lo fontenc.lo
 libfontenc_la_OBJECTS = $(am_libfontenc_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+libfontenc_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libfontenc_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(LT_QUIET) --tag=CC --mode=compile $(CC) \
-	$(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC    " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
 CCLD = $(CC)
-LINK = $(LIBTOOL) $(LT_QUIET) --tag=CC --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD  " $@;
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
 SOURCES = $(libfontenc_la_SOURCES)
 DIST_SOURCES = $(libfontenc_la_SOURCES)
-libfontencincludeHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(libfontencinclude_HEADERS)
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
-AMCMDECHO = @AMCMDECHO@
-AMDEPSHOWCMDSAT = @AMDEPSHOWCMDSAT@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMPRETTYECHO = @AMPRETTYECHO@
-AMSHOWCMDSAT = @AMSHOWCMDSAT@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -94,47 +122,49 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CHANGELOG_CMD = @CHANGELOG_CMD@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
+CWARNFLAGS = @CWARNFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 ENCODINGSDIR = @ENCODINGSDIR@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 FONTENC_CFLAGS = @FONTENC_CFLAGS@
 FONTENC_LIBS = @FONTENC_LIBS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LINT = @LINT@
-LINT_FALSE = @LINT_FALSE@
 LINT_FLAGS = @LINT_FLAGS@
-LINT_TRUE = @LINT_TRUE@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
-LT_QUIET = @LT_QUIET@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -144,17 +174,17 @@ PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PKG_CONFIG = @PKG_CONFIG@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -166,8 +196,10 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
+distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
@@ -184,6 +216,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -193,14 +226,19 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 lib_LTLIBRARIES = libfontenc.la
 libfontenc_la_SOURCES = \
          encparse.c \
          fontenc.c \
 	 fontencI.h
 
+AM_CFLAGS = @FONTENC_CFLAGS@
 FONTENCDIR = @ENCODINGSDIR@
 FONTENCDEFS = -DFONT_ENCODINGS_DIRECTORY=\"$(FONTENCDIR)/encodings.dir\"
 INCLUDES = -I$(top_srcdir)/include \
@@ -223,220 +261,204 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	@AMPRETTYECHO@ '  [AUTOMAKE  ]  src/Makefile'; \
-	@AMCMDECHO@ ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  src/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  src/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu src/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    @AMPRETTYECHO@ '  [SH        ]  config.status $(subdir)/$@'; \
-	    @AMCMDECHO@ ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	@@AMPRETTYECHO@ '  [SH        ]  config.status'
-	@AMSHOWCMDSAT@cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	@@AMPRETTYECHO@ '  [AUTOCONF  ]  Regenerate'
-	@AMSHOWCMDSAT@cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	@@AMPRETTYECHO@ '  [ACLOCAL   ]  Regenerate'
-	@AMSHOWCMDSAT@cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	@AMSHOWCMDSAT@test -z "$(libdir)" || ( @AMPRETTYECHO@ '  [MKDIR     ]  "$(DESTDIR)$(libdir)"'; $(mkdir_p) "$(DESTDIR)$(libdir)" )
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    @AMPRETTYECHO@ "  [INSTALL   ]  $$p -> $(DESTDIR)$(libdir)/$$f"; \
-	    @AMCMDECHO@ " $(LIBTOOL) $(LT_QUIET) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) $(LT_QUIET) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  @AMPRETTYECHO@ "  [RM        ]  $(DESTDIR)$(libdir)/$$p"; \
-	  @AMCMDECHO@ " $(LIBTOOL) $(LT_QUIET) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) $(LT_QUIET) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
 	done
 
 clean-libLTLIBRARIES:
-	@AMSHOWCMDSAT@-test -z "$(lib_LTLIBRARIES)" || ( \
-	  @AMPRETTYECHO@ '  [RM        ]  $(lib_LTLIBRARIES)'; \
-	  rm -f $(lib_LTLIBRARIES) )
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 	  test "$$dir" != "$$p" || dir=.; \
-	  @AMPRETTYECHO@ "  [RM        ] $${dir}/so_locations"; \
-	  @AMCMDECHO@ "rm -f \"$${dir}/so_locations\""; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
 libfontenc.la: $(libfontenc_la_OBJECTS) $(libfontenc_la_DEPENDENCIES) 
-	@@AMPRETTYECHO@ '  [LD        ]  libfontenc.la'
-	@AMSHOWCMDSAT@$(LINK) -rpath $(libdir) $(libfontenc_la_LDFLAGS) $(libfontenc_la_OBJECTS) $(libfontenc_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libfontenc_la_LINK) -rpath $(libdir) $(libfontenc_la_OBJECTS) $(libfontenc_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
-	@@AMPRETTYECHO@ '  [RM        ]  *.$(OBJEXT)'
-	@AMSHOWCMDSAT@-rm -f *.$(OBJEXT)
+	-rm -f *.$(OBJEXT)
 
 distclean-compile:
-	@@AMPRETTYECHO@ '  [RM        ]  *.tab.c'
-	@AMSHOWCMDSAT@-rm -f *.tab.c
+	-rm -f *.tab.c
 
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/encparse.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fontenc.Plo@am__quote@
 
 .c.o:
-	@@AMPRETTYECHO@ '  [C         ]  $<'
-@am__fastdepCC_TRUE@	@AMSHOWCMDSAT@if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	@AMSHOWCMDSAT@source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	@AMDEPSHOWCMDSAT@$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
-	@@AMPRETTYECHO@ '  [C         ]  $<'
-@am__fastdepCC_TRUE@	@AMSHOWCMDSAT@if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	@AMSHOWCMDSAT@source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	@AMDEPSHOWCMDSAT@$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
-	@@AMPRETTYECHO@ '  [C         ]  $<'
-@am__fastdepCC_TRUE@	@AMSHOWCMDSAT@if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	@AMSHOWCMDSAT@source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	@AMDEPSHOWCMDSAT@$(LTCOMPILE) -c -o $@ $<
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 mostlyclean-libtool:
-	@@AMPRETTYECHO@ '  [RM        ]  *.lo'
-	@AMSHOWCMDSAT@-rm -f *.lo
+	-rm -f *.lo
 
 clean-libtool:
-	@@AMPRETTYECHO@ '  [RM        ]  .libs _libs'
-	@AMSHOWCMDSAT@-rm -rf .libs _libs
-
-distclean-libtool:
-	@@AMPRETTYECHO@ '  [RM        ]  libtool'
-	@AMSHOWCMDSAT@-rm -f libtool
-uninstall-info-am:
+	-rm -rf .libs _libs
 install-libfontencincludeHEADERS: $(libfontencinclude_HEADERS)
 	@$(NORMAL_INSTALL)
-	@@AMPRETTYECHO@ '  [MKDIR     ]  $(DESTDIR)$(libfontencincludedir)'
-	@AMSHOWCMDSAT@test -z "$(libfontencincludedir)" || $(mkdir_p) "$(DESTDIR)$(libfontencincludedir)"
-	@list='$(libfontencinclude_HEADERS)'; for p in $$list; do \
+	test -z "$(libfontencincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libfontencincludedir)"
+	@list='$(libfontencinclude_HEADERS)'; test -n "$(libfontencincludedir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  @AMPRETTYECHO@ "  [INSTALL   ]  '$$d$$p' -> '$(DESTDIR)$(libfontencincludedir)/$$f'"; \
-	  @AMCMDECHO@ " $(libfontencincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libfontencincludedir)/$$f'"; \
-	  $(libfontencincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libfontencincludedir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libfontencincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libfontencincludedir)" || exit $$?; \
 	done
 
 uninstall-libfontencincludeHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(libfontencinclude_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  @AMPRETTYECHO@ "  [RM        ]  $(DESTDIR)$(libfontencincludedir)/$$f"; \
-	  @AMCMDECHO@ " rm -f '$(DESTDIR)$(libfontencincludedir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(libfontencincludedir)/$$f"; \
-	done
+	@list='$(libfontencinclude_HEADERS)'; test -n "$(libfontencincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(libfontencincludedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(libfontencincludedir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	@AMSHOWCMDSAT@list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	@AMPRETTYECHO@ '  [MKID      ]  $$unique'; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	@AMSHOWCMDSAT@tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  @AMPRETTYECHO@ "  [ETAGS     ]  $$tags"; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	@AMSHOWCMDSAT@tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || ( \
-	     @AMPRETTYECHO@ "  [CTAGS     ]  $$tags"; \
-	     $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique )
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
 
 GTAGS:
-	@@AMPRETTYECHO@ '  [GTAGS     ]'
-	@AMSHOWCMDSAT@here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
-	@@AMPRETTYECHO@ '  [RM        ]  TAGS ID GTAGS GRTAGS GSYMS GPATH tags'
-	@AMSHOWCMDSAT@-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	@@AMPRETTYECHO@ '  [MKDIR     ]  $(distdir)/../include/X11/fonts'
-	@AMSHOWCMDSAT@$(mkdir_p) $(distdir)/../include/X11/fonts
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -444,8 +466,8 @@ check-am: all-am
 check: check-am
 all-am: Makefile $(LTLIBRARIES) $(HEADERS)
 installdirs:
-	@AMSHOWCMDSAT@for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(libfontencincludedir)"; do \
-	  test -z "$$dir" || ( @AMPRETTYECHO@ "  [MKDIR     ]  $$dir"; $(mkdir_p) "$$dir" ); \
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(libfontencincludedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -457,7 +479,7 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	@AMSHOWCMDSAT@$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 	  `test -z '$(STRIP)' || \
 	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
@@ -466,8 +488,8 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-	@@AMPRETTYECHO@ '  [RM        ]  $(CONFIG_CLEAN_FILES)'
-	@AMSHOWCMDSAT@-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -478,12 +500,10 @@ clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
 	mostlyclean-am
 
 distclean: distclean-am
-	@@AMPRETTYECHO@ '  [RM        ]  ./$(DEPDIR)'
-	@AMSHOWCMDSAT@-rm -rf ./$(DEPDIR)
-	@@AMPRETTYECHO@ '  [RM        ]  Makefile'
-	@AMSHOWCMDSAT@-rm -f Makefile
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-libtool distclean-tags
+	distclean-tags
 
 dvi: dvi-am
 
@@ -491,25 +511,43 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am: install-libfontencincludeHEADERS
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am: install-libLTLIBRARIES
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
-	@@AMPRETTYECHO@ '  [RM        ]  ./$(DEPDIR)'
-	@AMSHOWCMDSAT@-rm -rf ./$(DEPDIR)
-	@@AMPRETTYECHO@ '  [RM        ]  Makefile'
-	@AMSHOWCMDSAT@-rm -f Makefile
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-am
@@ -525,26 +563,31 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
+uninstall-am: uninstall-libLTLIBRARIES \
 	uninstall-libfontencincludeHEADERS
 
+.MAKE: install-am install-strip
+
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libLTLIBRARIES clean-libtool ctags distclean \
 	distclean-compile distclean-generic distclean-libtool \
 	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am \
 	install-libLTLIBRARIES install-libfontencincludeHEADERS \
-	install-man install-strip installcheck installcheck-am \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
 	installdirs maintainer-clean maintainer-clean-generic \
 	mostlyclean mostlyclean-compile mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
-	uninstall-am uninstall-info-am uninstall-libLTLIBRARIES \
+	uninstall-am uninstall-libLTLIBRARIES \
 	uninstall-libfontencincludeHEADERS
 
 
 @LINT_TRUE@lint:
 @LINT_TRUE@	$(LINT) $(ALL_LINT_FLAGS) $(libfontenc_la_SOURCES) $(libfontenc_la_LIBADD) $(LIBS)
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/libfontenc/src/fontenc.c b/libfontenc/src/fontenc.c
index 955e48155..923e35ea2 100644
--- a/libfontenc/src/fontenc.c
+++ b/libfontenc/src/fontenc.c
@@ -630,8 +630,8 @@ FontEncFromXLFD(const char *name, int length)
     }
 
     /* now p either is null or points at the '-' before the charset registry */
-    
-    if(p == 0)
+
+    if(p == NULL)
         return NULL;
     
     len = length - (p - name) - 1;
diff --git a/pixman/Makefile.in b/pixman/Makefile.in
index 35c4104b4..16f5afd73 100644
--- a/pixman/Makefile.in
+++ b/pixman/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -96,24 +96,19 @@ CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DEP_CFLAGS = @DEP_CFLAGS@
 DEP_LIBS = @DEP_LIBS@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GREP = @GREP@
 GTK_CFLAGS = @GTK_CFLAGS@
 GTK_LIBS = @GTK_LIBS@
@@ -122,10 +117,12 @@ INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_VERSION_INFO = @LT_VERSION_INFO@
@@ -133,8 +130,12 @@ MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 MMX_CFLAGS = @MMX_CFLAGS@
 MMX_LDFLAGS = @MMX_LDFLAGS@
+NM = @NM@
 NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -162,8 +163,7 @@ abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -194,6 +194,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -296,7 +297,7 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 distclean-libtool:
-	-rm -f libtool
+	-rm -f libtool config.lt
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
@@ -390,7 +391,7 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
diff --git a/pixman/aclocal.m4 b/pixman/aclocal.m4
index aa6964b63..f307ea994 100644
--- a/pixman/aclocal.m4
+++ b/pixman/aclocal.m4
@@ -1,4 +1,4 @@
-# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 # 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
@@ -13,108 +13,194 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(AC_AUTOCONF_VERSION, [2.63],,
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
 [m4_warning([this file was generated for autoconf 2.63.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
 
-# serial 52 AC_PROG_LIBTOOL
+# serial 56 LT_INIT
 
 
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
-         [],
-         [m4_define([AC_PROVIDE_IFELSE],
-	         [m4_ifdef([AC_PROVIDE_$1],
-		           [$2], [$3])])])
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
 
 
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ltmain"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 AC_SUBST(LIBTOOL)dnl
 
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
+_LT_SETUP
 
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
 
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
 AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
 dnl
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
 
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -130,116 +216,653 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
-
 # Global variables:
-default_ofile=libtool
+ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
 _LT_CC_BASENAME([$compiler])
 
 # Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
+    _LT_PATH_MAGIC
   fi
   ;;
 esac
 
-_LT_REQUIRED_DARWIN_CHECKS
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
 
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
 
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
 
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
 
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
 
 
-# _LT_AC_SYS_COMPILER
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
 # -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+  ;;
+esac
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  _LT_PROG_XSI_SHELLFNS
+
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
 [AC_REQUIRE([AC_PROG_CC])dnl
 
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -248,36 +871,20 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
 # Allow CC to be a program name with arguments.
 compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
+])# _LT_TAG_COMPILER
 
 
 # _LT_COMPILER_BOILERPLATE
 # ------------------------
 # Check for compiler boilerplate output or warnings with
 # the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 ])# _LT_COMPILER_BOILERPLATE
 
 
@@ -285,39 +892,57 @@ $rm conftest*
 # ----------------------
 # Check for linker boilerplate output or warnings with
 # the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+$RM -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 
 # _LT_REQUIRED_DARWIN_CHECKS
-# --------------------------
-# Check for some things on darwin
-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
   case $host_os in
     rhapsody* | darwin*)
     AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
     AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
 
     AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
       [lt_cv_apple_cc_single_mod=no
       if test -z "${LT_MULTI_MODULE}"; then
-   # By default we will add the -single_module flag. You can override
-   # by either setting the environment variable LT_MULTI_MODULE
-   # non-empty at configure time, or by adding -multi_module to the
-   # link flags.
-   echo "int foo(void){return 1;}" > conftest.c
-   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-     -dynamiclib ${wl}-single_module conftest.c
-   if test -f libconftest.dylib; then
-     lt_cv_apple_cc_single_mod=yes
-     rm -rf libconftest.dylib*
-   fi
-   rm conftest.c
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
       fi])
     AC_CACHE_CHECK([for -exported_symbols_list linker flag],
       [lt_cv_ld_exported_symbols_list],
@@ -326,26 +951,26 @@ AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
       echo "_main" > conftest.sym
       LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
       AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-   [lt_cv_ld_exported_symbols_list=yes],
-   [lt_cv_ld_exported_symbols_list=no])
-   LDFLAGS="$save_LDFLAGS"
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
     ])
     case $host_os in
-    rhapsody* | darwin1.[[0123]])
+    rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
     darwin1.*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-   10.[[012]]*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-   10.*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
@@ -355,10 +980,10 @@ AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
     if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
       _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
     else
-      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
     if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
     fi
@@ -366,16 +991,51 @@ AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
   esac
 ])
 
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
 # Links a minimal program and checks the executable
 # for the system default hardcoded library path. In most cases,
 # this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
 AC_LINK_IFELSE(AC_LANG_PROGRAM,[
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -390,45 +1050,45 @@ if test -z "$aix_libpath"; then
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi],[])
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
+])# _LT_SYS_MODULE_PATH_AIX
 
 
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
 [ifdef([AC_DIVERSION_NOTICE],
 	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
 	 [AC_DIVERT_PUSH(NOTICE)])
 $1
 AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
+])# _LT_SHELL_INIT
 
 
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
 # Add some code to the start of the generated configure script which
 # will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X[$]1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X[$]1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -438,9 +1098,9 @@ fi
 if test "X[$]1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 [$]*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -448,124 +1108,127 @@ fi
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
       else
-	# maybe with a smaller string...
-	prev=:
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "[$]0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
 fi
 
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
 
 
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
 [AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -576,12 +1239,12 @@ ia64-*-hpux*)
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
     esac
   fi
   rm -rf conftest*
@@ -590,80 +1253,79 @@ ia64-*-hpux*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
   fi
   rm -rf conftest*
   ;;
 
 x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_i386_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      libsuff=64
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_x86_64_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
     esac
   fi
   rm -rf conftest*
@@ -675,7 +1337,7 @@ s390*-*linux*|sparc*-*linux*)
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
     [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
      AC_LANG_POP])
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
@@ -691,7 +1353,7 @@ sparc*-*solaris*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
       *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
 	fi
 	;;
@@ -701,30 +1363,63 @@ sparc*-*solaris*)
   fi
   rm -rf conftest*
   ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-  ])
 esac
 
 need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
 
-])# _LT_AC_LOCK
 
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
 
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
 #		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
 # ----------------------------------------------------------------
 # Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$3"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -744,29 +1439,35 @@ AC_CACHE_CHECK([$1], [$2],
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 else
-    ifelse([$6], , :, [$6])
+    m4_if([$6], , :, [$6])
 fi
-])# AC_LIBTOOL_COMPILER_OPTION
+])# _LT_COMPILER_OPTION
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
 
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
    save_LDFLAGS="$LDFLAGS"
@@ -778,7 +1479,7 @@ AC_CACHE_CHECK([$1], [$2],
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -787,22 +1488,28 @@ AC_CACHE_CHECK([$1], [$2],
        $2=yes
      fi
    fi
-   $rm -r conftest*
+   $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
+    m4_if([$4], , :, [$4])
 else
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 fi
-])# AC_LIBTOOL_LINKER_OPTION
+])# _LT_LINKER_OPTION
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
 
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
@@ -824,7 +1531,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=-1;
     ;;
 
-  cygwin* | mingw*)
+  cygwin* | mingw* | cegcc*)
     # On Win9x/ME, this test blows up -- it succeeds, but takes
     # about 5 minutes as the teststring grows exponentially.
     # Worse, since 9x/ME are not pre-emptively multitasking,
@@ -879,7 +1586,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
@@ -890,20 +1597,28 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	      lt_cv_sys_max_cmd_len=$new_result &&
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
       done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
       teststring=
-      # Add a significant safety factor because C++ compilers can tack on massive
-      # amounts of additional arguments before passing them to the linker.
-      # It appears as though 1/2 is a usable value.
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
     fi
     ;;
@@ -914,27 +1629,35 @@ if test -n $lt_cv_sys_max_cmd_len ; then
 else
   AC_MSG_RESULT(none)
 fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
 
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
 
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
 
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "$cross_compiling" = yes; then :
   [$4]
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
+  cat > conftest.$ac_ext <<_LT_EOF
 [#line __oline__ "configure"
 #include "confdefs.h"
 
@@ -976,10 +1699,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -995,9 +1714,9 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }]
-EOF
+_LT_EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
@@ -1012,13 +1731,13 @@ EOF
   fi
 fi
 rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
+])# _LT_TRY_DLOPEN_SELF
 
 
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
@@ -1034,15 +1753,15 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   darwin*)
   # if libdl is installed we need to link against it
@@ -1052,7 +1771,7 @@ else
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ])
-   ;;
+    ;;
 
   *)
     AC_CHECK_FUNC([shl_load],
@@ -1094,7 +1813,7 @@ else
 
     AC_CACHE_CHECK([whether a program can dlopen itself],
 	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
 	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
     ])
@@ -1102,8 +1821,8 @@ else
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
 	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
       ])
@@ -1125,19 +1844,32 @@ else
   *) enable_dlopen_self_static=unknown ;;
   esac
 fi
-])# AC_LIBTOOL_DLOPEN_SELF
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
 
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
 AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
@@ -1161,37 +1893,41 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
      fi
    fi
    chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $rm conftest*
+   $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
    cd ..
-   rmdir conftest
-   $rm conftest*
+   $RM -r conftest
+   $RM conftest*
 ])
-])# AC_LIBTOOL_PROG_CC_C_O
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
 
 
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
 # Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
 
 hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING([if we can lock with hard links])
   hard_links=yes
-  $rm conftest*
+  $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -1204,12 +1940,13 @@ if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks"
 else
   need_locks=no
 fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
 
 
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
 [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
 [rm -f .libs 2>/dev/null
 mkdir .libs 2>/dev/null
@@ -1221,40 +1958,46 @@ else
 fi
 rmdir .libs 2>/dev/null])
 objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
 
 
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
 # Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
     # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+    _LT_TAGVAR(hardcode_action, $1)=relink
   else
     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+    _LT_TAGVAR(hardcode_action, $1)=immediate
   fi
 else
   # We cannot hardcode anything, or else we can only hardcode existing
   # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
 fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -1262,73 +2005,70 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
 
 
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
 old_striplib=
 AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
   AC_MSG_RESULT([yes])
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         old_striplib="$STRIP -S"
-         AC_MSG_RESULT([yes])
-       else
-  AC_MSG_RESULT([no])
-fi
-       ;;
-   *)
-  AC_MSG_RESULT([no])
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
     ;;
   esac
 fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
 
 
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# _LT_SYS_DYNAMIC_LINKER([TAG])
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
+m4_if([$1],
+	[], [
 if test "$GCC" = yes; then
   case $host_os in
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
   else
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
   fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
@@ -1342,7 +2082,7 @@ if test "$GCC" = yes; then
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -1362,10 +2102,23 @@ BEGIN {RS=" "; FS="/|\n";} {
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
-  sys_lib_search_path_spec=`echo $lt_search_path_spec`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -1402,7 +2155,7 @@ aix[[4-9]]*)
       aix4 | aix4.[[01]] | aix4.[[01]].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
@@ -1428,9 +2181,18 @@ aix[[4-9]]*)
   ;;
 
 amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
   ;;
 
 beos*)
@@ -1453,25 +2215,28 @@ bsdi[[45]]*)
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
-       $rm \$dlpath'
+       $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
@@ -1480,20 +2245,20 @@ cygwin* | mingw* | pw32*)
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
         # It is most probably a Windows format PATH printed by
         # mingw gcc, but we are running on Cygwin. Gcc prints its search
         # path with ; separators, and with drive letters. We can handle the
         # drive letters (cygwin fileutils understands them), so leave them,
         # especially as we might pass files found there to a mingw objdump,
         # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
       ;;
     pw32*)
@@ -1517,13 +2282,13 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -1616,18 +2381,18 @@ hpux9* | hpux10* | hpux11*)
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
@@ -1704,16 +2469,28 @@ linux* | k*bsd*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
+
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
   fi
 
@@ -1730,7 +2507,7 @@ netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
@@ -1751,14 +2528,16 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx*)
-  version_type=linux
+*nto* | *qnx*)
+  version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
@@ -1767,13 +2546,13 @@ openbsd*)
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[[89]] | openbsd2.[[89]].*)
 	shlibpath_overrides_runpath=no
@@ -1845,7 +2624,6 @@ sysv4 | sysv4.3*)
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
@@ -1876,13 +2654,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -1892,6 +2669,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1906,288 +2694,58 @@ esac
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
 
-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-        [include additional configurations @<:@automatic@:>@])],
-    [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  AC_LIBTOOL_LANG_CXX_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-	  AC_LIBTOOL_LANG_F77_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-	  AC_LIBTOOL_LANG_GCJ_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
 
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
 
-# AC_LIBTOOL_PICMODE([MODE])
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
 # --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
 # find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
 AC_MSG_CHECKING([for $1])
 AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 [case $MAGIC_CMD in
@@ -2200,7 +2758,7 @@ AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 dnl $ac_dummy forces splitting on constant user-supplied paths.
 dnl POSIX.2 word splitting is done only on the output of word expansions,
 dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
   for ac_dir in $ac_dummy; do
     IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
@@ -2215,7 +2773,7 @@ dnl not every word.  This closes a longstanding sh security hole.
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -2226,7 +2784,7 @@ dnl not every word.  This closes a longstanding sh security hole.
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -2243,37 +2801,47 @@ if test -n "$MAGIC_CMD"; then
 else
   AC_MSG_RESULT(no)
 fi
-])# AC_PATH_TOOL_PREFIX
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
 
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
 
-# AC_PATH_MAGIC
-# -------------
+
+# _LT_PATH_MAGIC
+# --------------
 # find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
   else
     MAGIC_CMD=:
   fi
 fi
-])# AC_PATH_MAGIC
+])# _LT_PATH_MAGIC
 
 
-# AC_PROG_LD
+# LT_PATH_LD
 # ----------
 # find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
@@ -2290,9 +2858,9 @@ if test "$GCC" = yes; then
     [[\\/]]* | ?:[[\\/]]*)
       re_direlt='/[[^/]][[^/]]*/\.\./'
       # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -2342,15 +2910,24 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
 
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
 
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
 [# I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
@@ -2361,14 +2938,14 @@ case `$LD -v 2>&1 </dev/null` in
   ;;
 esac])
 with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
+])# _LT_PATH_LD_GNU
 
 
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
+# _LT_CMD_RELOAD
+# --------------
 # find reload flag for linker
 #   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+m4_defun([_LT_CMD_RELOAD],
 [AC_CACHE_CHECK([for $LD option to reload object files],
   lt_cv_ld_reload_flag,
   [lt_cv_ld_reload_flag='-r'])
@@ -2387,15 +2964,19 @@ case $host_os in
     fi
     ;;
 esac
-])# AC_PROG_LD_RELOAD_FLAG
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
 
 
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
 # how to check for library dependencies
 #  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
 lt_cv_deplibs_check_method,
 [lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -2445,12 +3026,18 @@ mingw* | pw32*)
   fi
   ;;
 
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
 darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
@@ -2508,7 +3095,7 @@ linux* | k*bsd*-gnu)
   ;;
 
 netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -2521,12 +3108,12 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -2545,6 +3132,10 @@ solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
@@ -2572,7 +3163,7 @@ sysv4 | sysv4.3*)
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -2580,14 +3171,20 @@ esac
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
+
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
 
 
-# AC_PROG_NM
+# LT_PATH_NM
 # ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
@@ -2629,16 +3226,51 @@ else
     done
     IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  : ${lt_cv_path_NM=no}
 fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
 
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
 
-# AC_CHECK_LIBM
-# -------------
+
+# LT_LIB_M
+# --------
 # check for math library
-AC_DEFUN([AC_CHECK_LIBM],
+AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
@@ -2653,2155 +3285,46 @@ case $host in
   AC_CHECK_LIB(m, cos, LIBM="-lm")
   ;;
 esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!).  If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, lt_dlinit,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix[[4-9]]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  AC_PROG_LD
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix[[4-9]]*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  :
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-    # as there is no search path for DLLs.
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-      if test "$GXX" = yes ; then
-      output_verbose_link_cmd='echo'
-      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-      fi
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[[12]]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    aCC*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-      case $host_cpu in
-      hppa*64*|ia64*) ;;
-      *)
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-    *)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
-    esac
-
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    hppa*64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    *)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  interix[[3-9]]*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC* | pgcpp*)
-        # Portland Group C++ compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C++ 5.9
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
-	  # Not sure whether something based on
-	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	  # would be better.
-	  output_verbose_link_cmd='echo'
-
-	  # Archives containing C++ object files must be created using
-	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	  # necessary to make sure instantiated templates are included
-	  # in the archive.
-	  _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	  ;;
-	esac
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  openbsd*)
-    if test -f /usr/libexec/ld.so; then
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      fi
-      output_verbose_link_cmd='echo'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	  *)
-	    # The compiler driver will combine and reorder linker options,
-	    # but understands `-z linker_flag'.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	    ;;
-	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	  case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	  *)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	    ;;
-	  esac
-	fi
-	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_AC_TAGVAR(predep_objects,$1)=
-  _LT_AC_TAGVAR(postdep_objects,$1)=
-  _LT_AC_TAGVAR(postdeps,$1)=
-  ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-    #
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
-      program t
-      end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix[[4-9]]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
+AC_SUBST([LIBM])
+])# LT_LIB_M
 
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(hardcode_automatic, $1) \
-    _LT_AC_TAGVAR(module_cmds, $1) \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(fix_srcfile_path, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(module_cmds, $1) | \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
-
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
 
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
     [-fno-rtti -fno-exceptions], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
 fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
 
 
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 AC_MSG_CHECKING([command to parse $NM output from $compiler object])
 AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
@@ -4815,33 +3338,18 @@ symcode='[[BCDEGRST]]'
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
 # Define system-specific variables.
 case $host_os in
 aix*)
   symcode='[[BCDT]]'
   ;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   symcode='[[ABCDGISTW]]'
   ;;
-hpux*) # Its linker distinguishes data from code symbols
+hpux*)
   if test "$host_cpu" = ia64; then
     symcode='[[ABCDEGRST]]'
   fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDGIRSTW]]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
   ;;
 irix* | nonstopux*)
   symcode='[[BCDEGRST]]'
@@ -4866,44 +3374,72 @@ sysv4)
   ;;
 esac
 
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
 # Handle CRLF in mingw tool chain
 opt_cr=
 case $build_os in
 mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
   ;;
 esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
+# Try without a prefix underscore, then with it.
 for ac_symprfx in "" "_"; do
 
   # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
   symxfrm="\\1 $ac_symprfx\\2 \\2"
 
   # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
 
   # Check to see that the pipe works correctly.
   pipe_works=no
 
   rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
+  cat > conftest.$ac_ext <<_LT_EOF
 #ifdef __cplusplus
 extern "C" {
 #endif
 char nm_test_var;
-void nm_test_func(){}
+void nm_test_func(void);
+void nm_test_func(void){}
 #ifdef __cplusplus
 }
 #endif
 int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+_LT_EOF
 
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
@@ -4917,48 +3453,50 @@ EOF
       fi
 
       # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-EOF
+_LT_EOF
 	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
+	  cat <<_LT_EOF >> conftest.$ac_ext
 
-/* The mapping between symbol names and symbols. */
+/* The mapping between symbol names and symbols.  */
 const struct {
   const char *name;
-  lt_ptr_t address;
+  void       *address;
 }
-lt_preloaded_symbols[[]] =
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
 {
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
 };
 
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
 #ifdef __cplusplus
 }
 #endif
-EOF
+_LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_save_LIBS="$LIBS"
 	  lt_save_CFLAGS="$CFLAGS"
 	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
 	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
@@ -4995,56 +3533,78 @@ if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; the
 else
   AC_MSG_RESULT(ok)
 fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
 
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
 
 AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
+m4_if([$1], [CXX], [
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
+
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
+
     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
-    mingw* | cygwin* | os2* | pw32*)
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
     *djgpp*)
       # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
     interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
@@ -5052,22 +3612,28 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       ;;
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
       fi
       ;;
     hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
       case $host_cpu in
-      hppa*64*|ia64*)
+      hppa*64*)
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	;;
       esac
       ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
   else
@@ -5076,37 +3642,27 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
 	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
 	fi
 	;;
       chorus*)
 	case $cc_basename in
 	cxch68*)
 	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
 	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           ;;
-         esac
-       ;;
       dgux*)
 	case $cc_basename in
 	  ec++*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
 	  ghcx*)
 	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  *)
 	    ;;
@@ -5118,21 +3674,21 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       hpux9* | hpux10* | hpux11*)
 	case $cc_basename in
 	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	    fi
 	    ;;
 	  aCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
 	      ;;
 	    *)
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	      ;;
 	    esac
 	    ;;
@@ -5147,8 +3703,8 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       irix5* | irix6* | nonstopux*)
 	case $cc_basename in
 	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    # CC pic flag -KPIC is the default.
 	    ;;
 	  *)
@@ -5159,35 +3715,48 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
 	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler.
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	  cxx*)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	    ;;
 	  *)
 	    case `$CC -V 2>&1 | sed 5q` in
 	    *Sun\ C*)
 	      # Sun C++ 5.9
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	      ;;
 	    esac
 	    ;;
@@ -5200,7 +3769,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       mvs*)
 	case $cc_basename in
 	  cxx*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
 	    ;;
 	  *)
 	    ;;
@@ -5208,22 +3777,27 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       netbsd*)
 	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
 	  KCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    ;;
 	  RCC*)
 	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  cxx*)
 	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
 	  *)
 	    ;;
@@ -5235,13 +3809,13 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	case $cc_basename in
 	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	    ;;
 	  gcx*)
 	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	    ;;
 	  *)
 	    ;;
@@ -5251,82 +3825,104 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	case $cc_basename in
 	  CC*)
 	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
 	  lcc*)
 	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
       tandem*)
 	case $cc_basename in
 	  NCC*)
 	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
 	  *)
 	    ;;
 	esac
 	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
       vxworks*)
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
 	;;
     esac
   fi
 ],
 [
   if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
 
     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | cygwin* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     darwin* | rhapsody*)
       # PIC is the default on this platform
       # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
       ;;
 
     interix[[3-9]]*)
@@ -5337,65 +3933,48 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       enable_shared=no
       ;;
 
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
       fi
       ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
     aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       if test "$host_cpu" = ia64; then
 	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       esac
-       ;;
 
-    mingw* | cygwin* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
       case $host_cpu in
@@ -5403,222 +3982,263 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	# +Z the default
 	;;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     linux* | k*bsd*-gnu)
       case $cc_basename in
-      icc* | ecc*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
         ;;
       ccc*)
-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
         # All Alpha code is PIC.
-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
       *)
-        case `$CC -V 2>&1 | sed 5q` in
+	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)
 	  # Sun C 5.9
-	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	  ;;
 	*Sun\ F*)
 	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
 	  ;;
 	esac
 	;;
       esac
       ;;
 
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
     osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     rdos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
     solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
       f77* | f90* | f95*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
       esac
       ;;
 
     sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
 
     sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     unicos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
 
     uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
     *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
       ;;
     esac
   fi
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
 case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
     ;;
   *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
 
 #
 # Check to make sure the static flag actually works.
 #
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
   $lt_tmp_static_flag,
   [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
 
 
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
 # See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
 AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
   aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
-  cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+  cygwin* | mingw* | cegcc*)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   esac
-  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-],[
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
   runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-  _LT_AC_TAGVAR(module_cmds, $1)=
-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
   # include_expsyms should be a list of space-separated symbols to be *always*
   # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
+  _LT_TAGVAR(include_expsyms, $1)=
   # exclude_expsyms can be an extended regexp of symbols to exclude
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
@@ -5627,10 +4247,9 @@ ifelse([$1],[CXX],[
   # Exclude shared library initialization/finalization symbols.
 dnl Note also adjust exclude_expsyms for C++ above.
   extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  _LT_CC_BASENAME([$compiler])
+
   case $host_os in
-  cygwin* | mingw* | pw32*)
+  cygwin* | mingw* | pw32* | cegcc*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
@@ -5647,7 +4266,7 @@ dnl Note also adjust exclude_expsyms for C++ above.
     ;;
   esac
 
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  _LT_TAGVAR(ld_shlibs, $1)=yes
   if test "$with_gnu_ld" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
@@ -5656,16 +4275,16 @@ dnl Note also adjust exclude_expsyms for C++ above.
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
+    case `$LD -v 2>&1` in
       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -5678,8 +4297,8 @@ dnl Note also adjust exclude_expsyms for C++ above.
     aix[[3-9]]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
@@ -5687,49 +4306,50 @@ dnl Note also adjust exclude_expsyms for C++ above.
 *** really care for shared libraries, you may want to modify your PATH
 *** so that a non-GNU linker is found, and then restart.
 
-EOF
+_LT_EOF
       fi
       ;;
 
     amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
       ;;
 
     beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
 	  cp $export_symbols $output_objdir/$soname.def;
 	else
 	  echo EXPORTS > $output_objdir/$soname.def;
@@ -5737,79 +4357,109 @@ EOF
 	fi~
 	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     interix[[3-9]]*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
 	tmp_addflag=
+	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
 	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
 	  tmp_addflag=' -i_dynamic -nofor_main' ;;
 	ifc* | ifort*)			# Intel Fortran compiler
 	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
 	esac
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+        _LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
     solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
 *** create shared libraries on Solaris systems.  Therefore, libtool
@@ -5818,19 +4468,19 @@ EOF
 *** your PATH or compiler configuration so that the native linker is
 *** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
       case `$LD -v 2>&1` in
         *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
@@ -5843,54 +4493,58 @@ EOF
 _LT_EOF
 	;;
 	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
-	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
 	;;
       esac
       ;;
 
     sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
     esac
 
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
       runpath_var=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
     case $host_os in
     aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
       if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
       fi
       ;;
 
@@ -5904,10 +4558,10 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
@@ -5916,10 +4570,10 @@ _LT_EOF
 	# need to do runtime linking.
 	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
 	  done
 	  ;;
 	esac
@@ -5934,30 +4588,32 @@ _LT_EOF
       # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
       # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
       if test "$GCC" = yes; then
 	case $host_os in aix4.[[012]]|aix4.[[012]].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
-  	  # We have reworked collect2
-  	  :
+	  # We have reworked collect2
+	  :
 	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
 	  fi
 	  ;;
 	esac
@@ -5968,8 +4624,8 @@ _LT_EOF
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
 	  if test "$aix_use_runtimelinking" = yes; then
@@ -5980,129 +4636,94 @@ _LT_EOF
 	fi
       fi
 
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(always_export_symbols, $1)=yes
       if test "$aix_use_runtimelinking" = yes; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       _LT_AC_SYS_LIBPATH_AIX
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
 	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
 	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
 
     amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
       ;;
 
     bsdi[[45]]*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
       ;;
 
-    cygwin* | mingw* | pw32*)
+    cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
       # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
     darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-    fi
+      _LT_DARWIN_LINKER_FEATURES($1)
       ;;
 
     dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      _LT_TAGVAR(ld_shlibs, $1)=no
       ;;
 
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
@@ -6110,60 +4731,60 @@ _LT_EOF
     # does not break anything, and helps significantly (at the cost of a little
     # extra space).
     freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
     freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     hpux9*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       ;;
 
     hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
       if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
-	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
       fi
       ;;
 
@@ -6171,45 +4792,45 @@ _LT_EOF
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	case $host_cpu in
 	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
 	  ;;
 	esac
       fi
@@ -6217,194 +4838,221 @@ _LT_EOF
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        AC_LINK_IFELSE(int foo(void) {},
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+        )
+        LDFLAGS="$save_LDFLAGS"
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
     netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
       ;;
 
     openbsd*)
       if test -f /usr/libexec/ld.so; then
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	else
 	  case $host_os in
 	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	     _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	     ;;
 	   *)
-	     _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	     ;;
 	  esac
-        fi
+	fi
       else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
-	wlarc=''
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       case $host_os in
       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
 	# but understands `-z linker_flag'.  GCC discards it without `$wl',
 	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
 	if test "$GCC" = yes; then
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
 	else
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	fi
 	;;
       esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
     sunos4*)
       if test "x$host_vendor" = xsequent; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     sysv4)
       case $host_vendor in
 	sni)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
 	;;
 	siemens)
 	  ## LD is ld it makes a PLAMLIB
 	  ## CC just makes a GrossModule.
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
         ;;
 	motorola)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
 	;;
       esac
       runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
       ;;
 
     sysv4*MP*)
       if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	runpath_var=LD_RUN_PATH
 	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
       fi
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -6415,50 +5063,65 @@ _LT_EOF
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
     *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      _LT_TAGVAR(ld_shlibs, $1)=no
       ;;
     esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
   fi
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
 
 #
 # Do we need to explicitly link libc?
 #
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
 x|xyes)
   # Assume -lc should be added
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
   if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    case $_LT_TAGVAR(archive_cmds, $1) in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
       ;;
@@ -6467,7 +5130,7 @@ x|xyes)
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
       AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $rm conftest*
+      $RM conftest*
       echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
@@ -6475,135 +5138,1916 @@ x|xyes)
         lib=conftest
         libobjs=conftest.$ac_objext
         deplibs=
-        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
         compiler_flags=-v
         linker_flags=-v
         verstring=
         output_objdir=.
         libname=conftest
-        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+        _LT_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
         then
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
         else
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
         fi
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
       else
         cat conftest.err 1>&5
       fi
-      $rm conftest*
-      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      $RM conftest*
+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
       ;;
     esac
   fi
   ;;
 esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
 
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+    [[If ld is used when linking, flag to hardcode $libdir into a binary
+    during linking.  This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+    [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
 
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
+# Source file extension for C test sources.
+ac_ext=c
 
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
 
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
 
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
 
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
 
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
 
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+        # as there is no search path for DLLs.
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+        _LT_TAGVAR(always_export_symbols, $1)=no
+        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+          # If the export-symbols file already is a .def file (1st line
+          # is EXPORTS), use it as is; otherwise, prepend...
+          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    cp $export_symbols $output_objdir/$soname.def;
+          else
+	    echo EXPORTS > $output_objdir/$soname.def;
+	    cat $export_symbols >> $output_objdir/$soname.def;
+          fi~
+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        else
+          _LT_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd[[12]]*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      gnu*)
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 will use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  xl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='echo'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=echo
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='echo'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
 
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
 ])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
 
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
 
-# Cheap backport of AS_EXECUTABLE_P and required macros
-# from Autoconf 2.59; we should not use $as_executable_p directly.
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $p in
 
-# _AS_TEST_PREPARE
-# ----------------
-m4_ifndef([_AS_TEST_PREPARE],
-[m4_defun([_AS_TEST_PREPARE],
-[if test -x / >/dev/null 2>&1; then
-  as_executable_p='test -x'
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
 else
-  as_executable_p='test -f'
+  echo "libtool.m4: error: problem compiling $1 test program"
 fi
-])])# _AS_TEST_PREPARE
 
-# AS_EXECUTABLE_P
-# ---------------
-# Check whether a file is executable.
-m4_ifndef([AS_EXECUTABLE_P],
-[m4_defun([AS_EXECUTABLE_P],
-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
-$as_executable_p $1[]dnl
-])])# AS_EXECUTABLE_P
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${F77-"f77"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${FC-"f95"}
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
 
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
 # NOTE: This macro has been submitted for inclusion into   #
 #  GNU Autoconf as AC_PROG_SED.  When it is available in   #
 #  a released version of Autoconf we should remove this    #
 #  macro and use it instead.                               #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
+
+m4_defun([AC_PROG_SED],
 [AC_MSG_CHECKING([for a sed that does not truncate output])
 AC_CACHE_VAL(lt_cv_path_SED,
 [# Loop through the user's path and test for sed and gsed.
@@ -6615,7 +7059,7 @@ do
   test -z "$as_dir" && as_dir=.
   for lt_ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
-      if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
         lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
       fi
     done
@@ -6656,8 +7100,874 @@ done
 SED=$lt_cv_path_SED
 AC_SUBST([SED])
 AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $[*] ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
+
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$[@]"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]+=\$[2]"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]=\$$[1]\$[2]"
+}
+
+_LT_EOF
+    ;;
+  esac
+])
+
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
 ])
 
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
+
+
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [0], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
+
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# Generated from ltversion.in.
+
+# serial 3012 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.2.6])
+m4_define([LT_PACKAGE_REVISION], [1.3012])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.2.6'
+macro_revision='1.3012'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
+
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 4 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+
 # pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
 # 
 # Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
@@ -6814,7 +8124,7 @@ else
 fi[]dnl
 ])# PKG_CHECK_MODULES
 
-# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6829,7 +8139,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION],
 [am__api_version='1.10'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10.1], [],
+m4_if([$1], [1.10.2], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -6843,12 +8153,12 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.1])dnl
+[AM_AUTOMAKE_VERSION([1.10.2])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -7098,19 +8408,28 @@ _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 3
+#serial 4
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
+[# Autoconf 2.62 quotes --file arguments for eval, but not when files
+# are listed without --file.  Let's play safe and only enable the eval
+# if we detect the quoting.
+case $CONFIG_FILES in
+*\'*) eval set x "$CONFIG_FILES" ;;
+*)   set x $CONFIG_FILES ;;
+esac
+shift
+for mf
+do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -7454,13 +8773,13 @@ esac
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -7477,7 +8796,7 @@ AC_DEFUN([_AM_SET_OPTION],
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
diff --git a/pixman/config.h.in b/pixman/config.h.in
index bcdb41577..21ad43044 100644
--- a/pixman/config.h.in
+++ b/pixman/config.h.in
@@ -15,6 +15,9 @@
 /* Define to 1 if you have the <memory.h> header file. */
 #undef HAVE_MEMORY_H
 
+/* Whether we have posix_memalign() */
+#undef HAVE_POSIX_MEMALIGN
+
 /* Define to 1 if you have the <stdint.h> header file. */
 #undef HAVE_STDINT_H
 
@@ -36,6 +39,10 @@
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
 /* Name of package */
 #undef PACKAGE
 
diff --git a/pixman/configure b/pixman/configure
index f5ed65876..df72bda48 100644
--- a/pixman/configure
+++ b/pixman/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for pixman 0.15.18.
+# Generated by GNU Autoconf 2.63 for pixman 0.16.0.
 #
 # Report bugs to <"sandmann@daimi.au.dk">.
 #
@@ -577,22 +577,22 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -602,9 +602,9 @@ fi
 if test "X$1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 $*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -612,121 +612,116 @@ fi
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
       else
-	# maybe with a smaller string...
-	prev=:
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "$0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
 fi
 
 
 
 
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
 exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
@@ -750,8 +745,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='pixman'
 PACKAGE_TARNAME='pixman'
-PACKAGE_VERSION='0.15.18'
-PACKAGE_STRING='pixman 0.15.18'
+PACKAGE_VERSION='0.16.0'
+PACKAGE_STRING='pixman 0.16.0'
 PACKAGE_BUGREPORT='"sandmann@daimi.au.dk"'
 
 # Factoring default headers for most tests.
@@ -824,27 +819,26 @@ LT_VERSION_INFO
 PIXMAN_VERSION_MICRO
 PIXMAN_VERSION_MINOR
 PIXMAN_VERSION_MAJOR
-LIBTOOL
-ac_ct_F77
-FFLAGS
-F77
-CXXCPP
-am__fastdepCXX_FALSE
-am__fastdepCXX_TRUE
-CXXDEPMODE
-ac_ct_CXX
-CXXFLAGS
-CXX
 CPP
+OTOOL64
+OTOOL
+LIPO
 NMEDIT
 DSYMUTIL
+lt_ECHO
 RANLIB
 AR
-ECHO
+OBJDUMP
 LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
 EGREP
 GREP
 SED
+LIBTOOL
 am__fastdepCC_FALSE
 am__fastdepCC_TRUE
 CCDEPMODE
@@ -935,11 +929,10 @@ enable_option_checking
 enable_dependency_tracking
 enable_shared
 enable_static
+with_pic
 enable_fast_install
 with_gnu_ld
 enable_libtool_lock
-with_pic
-with_tags
 enable_mmx
 enable_sse2
 enable_vmx
@@ -958,12 +951,6 @@ LDFLAGS
 LIBS
 CPPFLAGS
 CPP
-CXX
-CXXFLAGS
-CCC
-CXXCPP
-F77
-FFLAGS
 PKG_CONFIG
 GTK_CFLAGS
 GTK_LIBS'
@@ -1519,7 +1506,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures pixman 0.15.18 to adapt to many kinds of systems.
+\`configure' configures pixman 0.16.0 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1589,7 +1576,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of pixman 0.15.18:";;
+     short | recursive ) echo "Configuration of pixman 0.16.0:";;
    esac
   cat <<\_ACEOF
 
@@ -1617,10 +1604,9 @@ Optional Features:
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
-  --with-tags[=TAGS]      include additional configurations [automatic]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
 
 Some influential environment variables:
   CC          C compiler command
@@ -1631,11 +1617,6 @@ Some influential environment variables:
   CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
               you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor
-  CXX         C++ compiler command
-  CXXFLAGS    C++ compiler flags
-  CXXCPP      C++ preprocessor
-  F77         Fortran 77 compiler command
-  FFLAGS      Fortran 77 compiler flags
   PKG_CONFIG  path to pkg-config utility
   GTK_CFLAGS  C compiler flags for GTK, overriding pkg-config
   GTK_LIBS    linker flags for GTK, overriding pkg-config
@@ -1706,7 +1687,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-pixman configure 0.15.18
+pixman configure 0.16.0
 generated by GNU Autoconf 2.63
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1720,7 +1701,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by pixman $as_me 0.15.18, which was
+It was created by pixman $as_me 0.16.0, which was
 generated by GNU Autoconf 2.63.  Invocation command line was
 
   $ $0 $@
@@ -2436,7 +2417,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='pixman'
- VERSION='0.15.18'
+ VERSION='0.16.0'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -3769,136 +3750,114 @@ else
 fi
 
 
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval=$enable_shared; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_shared=yes
-fi
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.6'
+macro_revision='1.3012'
+
+
+
+
+
 
 
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval=$enable_static; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_static=yes
-fi
 
 
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval=$enable_fast_install; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_fast_install=yes
-fi
 
 
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
 { $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
 $as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
+if test "${ac_cv_path_SED+set}" = set; then
   $as_echo_n "(cached) " >&6
 else
-  # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     $as_unset ac_script || ac_script=
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
+  for ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
-      if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
     done
   done
 done
 IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
+  if test -z "$ac_cv_path_SED"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5
+$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
   fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
+else
+  ac_cv_path_SED=$SED
+fi
 
 fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
 
-SED=$lt_cv_path_SED
 
-{ $as_echo "$as_me:$LINENO: result: $SED" >&5
-$as_echo "$SED" >&6; }
 
 { $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
 $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
@@ -4034,6 +3993,94 @@ $as_echo "$ac_cv_path_EGREP" >&6; }
  EGREP="$ac_cv_path_EGREP"
 
 
+{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 
 # Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
@@ -4059,9 +4106,9 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
     [\\/]* | ?:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -4141,33 +4188,15 @@ $as_echo "$lt_cv_prog_gnu_ld" >&6; }
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-$as_echo "$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
 
-{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-$as_echo_n "checking for BSD-compatible nm... " >&6; }
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
 if test "${lt_cv_path_NM+set}" = set; then
   $as_echo_n "(cached) " >&6
 else
@@ -4212,12 +4241,149 @@ else
     done
     IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  : ${lt_cv_path_NM=no}
 fi
 fi
 { $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:4372: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:4375: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:4378: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
 
 { $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
 $as_echo_n "checking whether ln -s works... " >&6; }
@@ -4230,6 +4396,334 @@ else
 $as_echo "no, using $LN_S" >&6; }
 fi
 
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
 { $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
 $as_echo_n "checking how to recognize dependent libraries... " >&6; }
 if test "${lt_cv_deplibs_check_method+set}" = set; then
@@ -4283,12 +4777,18 @@ mingw* | pw32*)
   fi
   ;;
 
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
 darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
@@ -4346,7 +4846,7 @@ linux* | k*bsd*-gnu)
   ;;
 
 netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
@@ -4359,12 +4859,12 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -4383,6 +4883,10 @@ solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
@@ -4410,7 +4914,7 @@ sysv4 | sysv4.3*)
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -4425,6 +4929,367 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
 
 
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:$LINENO: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="ar"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -4435,6 +5300,256 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 compiler=$CC
 
 
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+const struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:$LINENO: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
   enableval=$enable_libtool_lock;
@@ -4454,55 +5569,55 @@ ia64-*-hpux*)
   $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
     case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 4469 "configure"' > conftest.$ac_ext
+  echo '#line 5584 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
   fi
   rm -rf conftest*
   ;;
 
 x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
@@ -4511,45 +5626,44 @@ s390*-*linux*|sparc*-*linux*)
   $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
     case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_i386_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      libsuff=64
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_x86_64_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
     esac
   fi
   rm -rf conftest*
@@ -4644,7 +5758,7 @@ sparc*-*solaris*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
       *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
 	fi
 	;;
@@ -4654,12 +5768,623 @@ sparc*-*solaris*)
   fi
   rm -rf conftest*
   ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
 
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
 esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
 
-need_locks="$enable_libtool_lock"
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
 
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:$LINENO: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL64+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+    { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  lt_cv_ld_exported_symbols_list=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	lt_cv_ld_exported_symbols_list=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -5153,27 +6878,19 @@ done
 for ac_header in dlfcn.h
 do
 as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
 $as_echo_n "checking for $ac_header... " >&6; }
 if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
 else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
+  cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
+
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
@@ -5194,101 +6911,20 @@ $as_echo "$ac_try_echo") >&5
 	 test -z "$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
+  eval "$as_ac_Header=yes"
 else
   $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_header_compiler=no
+	eval "$as_ac_Header=no"
 fi
 
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ------------------------------------- ##
-## Report this to "sandmann@daimi.au.dk" ##
-## ------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
 fi
 ac_res=`eval 'as_val=${'$as_ac_Header'}
 		 $as_echo "$as_val"'`
 	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-
-fi
 as_val=`eval 'as_val=${'$as_ac_Header'}
 		 $as_echo "$as_val"'`
    if test "x$as_val" = x""yes; then
@@ -5300,1330 +6936,177 @@ fi
 
 done
 
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
-  if test -n "$CCC"; then
-    CXX=$CCC
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
-  { $as_echo "$as_me:$LINENO: result: $CXX" >&5
-$as_echo "$CXX" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CXX" && break
-  done
-fi
-if test -z "$CXX"; then
-  ac_ct_CXX=$CXX
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CXX"; then
-  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CXX="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-$as_echo "$ac_ct_CXX" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
 
-  test -n "$ac_ct_CXX" && break
-done
+# Set options
 
-  if test "x$ac_ct_CXX" = x; then
-    CXX="g++"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CXX=$ac_ct_CXX
-  fi
-fi
 
-  fi
-fi
-# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
 
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
+        enable_dlopen=no
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_compiler_gnu=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_compiler_gnu=no
-fi
+  enable_win32_dll=no
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GXX=yes
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  GXX=
+  enable_shared=yes
 fi
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-   ac_cxx_werror_flag=yes
-   ac_cv_prog_cxx_g=no
-   CXXFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_cxx_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	CXXFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-	 CXXFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_cxx_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
 
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-$as_echo "$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-depcc="$CXX"  am_compiler_list=
-
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CXX_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
       ;;
-    none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CXX_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
 else
-  am_cv_CXX_dependencies_compiler_type=none
+  enable_static=yes
 fi
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
-  am__fastdepCXX_TRUE=
-  am__fastdepCXX_FALSE='#'
-else
-  am__fastdepCXX_TRUE='#'
-  am__fastdepCXX_FALSE=
-fi
 
 
 
 
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
-if test -z "$CXXCPP"; then
-  if test "${ac_cv_prog_CXXCPP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CXXCPP needs to be expanded
-    for CXXCPP in "$CXX -E" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  # Broken: success on invalid input.
-continue
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
 
-    done
-    ac_cv_prog_CXXCPP=$CXXCPP
 
-fi
-  CXXCPP=$ac_cv_prog_CXXCPP
-else
-  ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5
-$as_echo "$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  # Broken: success on invalid input.
-continue
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then
+  withval=$with_pic; pic_mode="$withval"
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
+  pic_mode=default
 fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+test -z "$pic_mode" && pic_mode=default
 
-fi
 
 
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$F77"; then
-  ac_cv_prog_F77="$F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
-  { $as_echo "$as_me:$LINENO: result: $F77" >&5
-$as_echo "$F77" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
 
-    test -n "$F77" && break
-  done
-fi
-if test -z "$F77"; then
-  ac_ct_F77=$F77
-  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_F77"; then
-  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_F77="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-$as_echo "$ac_ct_F77" >&6; }
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+  enable_fast_install=yes
 fi
 
 
-  test -n "$ac_ct_F77" && break
-done
-
-  if test "x$ac_ct_F77" = x; then
-    F77=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    F77=$ac_ct_F77
-  fi
-fi
 
 
-# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-rm -f a.out
-
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file.  (Note that this only needs to work for GNU compilers.)
-ac_save_ext=$ac_ext
-ac_ext=F
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-      program main
-#ifndef __GNUC__
-       choke me
-#endif
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_compiler_gnu=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_compiler_gnu=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
-ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-$as_echo_n "checking whether $F77 accepts -g... " >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  FFLAGS=-g
-cat >conftest.$ac_ext <<_ACEOF
-      program main
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_f77_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_prog_f77_g=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-$as_echo "$ac_cv_prog_f77_g" >&6; }
-if test "$ac_test_FFLAGS" = set; then
-  FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-g -O2"
-  else
-    FFLAGS="-g"
-  fi
-else
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-O2"
-  else
-    FFLAGS=
-  fi
-fi
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
 
-if test $ac_compiler_gnu = yes; then
-  G77=yes
-else
-  G77=
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
 
 
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-# find the maximum length of command line arguments
-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-    i=0
-  teststring="ABCD"
 
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
 
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
 
-  cygwin* | mingw*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
 
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
 
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
 
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	      lt_cv_sys_max_cmd_len=$new_result &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on massive
-      # amounts of additional arguments before passing them to the linker.
-      # It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
 
-fi
 
-if test -n $lt_cv_sys_max_cmd_len ; then
-  { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: none" >&5
-$as_echo "none" >&6; }
-fi
 
 
 
 
 
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
 
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
 
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
 
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDGIRSTW]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
-  ;;
-osf*)
-  symcode='[BCDEGQRST]'
-  ;;
-solaris*)
-  symcode='[BDRT]'
-  ;;
-sco3.2v5*)
-  symcode='[DT]'
-  ;;
-sysv4.2uw2*)
-  symcode='[DT]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[ABDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
 
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[ABCDGIRSTW]' ;;
-esac
+test -z "$LN_S" && LN_S="ln -s"
 
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
 
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
 
-  # Check to see that the pipe works correctly.
-  pipe_works=no
 
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
 
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
 
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
 
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
 
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
 
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
 
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
 
-fi
 
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { $as_echo "$as_me:$LINENO: result: failed" >&5
-$as_echo "failed" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: ok" >&5
-$as_echo "ok" >&6; }
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
 fi
 
 { $as_echo "$as_me:$LINENO: checking for objdir" >&5
@@ -6649,6 +7132,26 @@ objdir=$lt_cv_objdir
 
 
 
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 case $host_os in
 aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
@@ -6663,348 +7166,41 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
-
 # Global variables:
-default_ofile=libtool
+ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { $as_echo "$as_me:$LINENO: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
 
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
 for cc_temp in $compiler""; do
   case $cc_temp in
     compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
@@ -7013,10 +7209,11 @@ for cc_temp in $compiler""; do
     *) break;;
   esac
 done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
 # Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
@@ -7047,7 +7244,7 @@ else
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -7058,7 +7255,7 @@ else
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -7080,6 +7277,10 @@ else
 $as_echo "no" >&6; }
 fi
 
+
+
+
+
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     { $as_echo "$as_me:$LINENO: checking for file" >&5
@@ -7109,7 +7310,7 @@ else
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -7120,7 +7321,7 @@ else
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -7142,6 +7343,7 @@ else
 $as_echo "no" >&6; }
 fi
 
+
   else
     MAGIC_CMD=:
   fi
@@ -7151,336 +7353,8 @@ fi
   ;;
 esac
 
-
-  case $host_os in
-    rhapsody* | darwin*)
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DSYMUTIL"; then
-  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
-  { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
-  ac_ct_DSYMUTIL=$DSYMUTIL
-  # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DSYMUTIL"; then
-  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_DSYMUTIL" = x; then
-    DSYMUTIL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DSYMUTIL=$ac_ct_DSYMUTIL
-  fi
-else
-  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NMEDIT"; then
-  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
-  { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
-  ac_ct_NMEDIT=$NMEDIT
-  # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_NMEDIT"; then
-  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_NMEDIT="nmedit"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_NMEDIT" = x; then
-    NMEDIT=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    NMEDIT=$ac_ct_NMEDIT
-  fi
-else
-  NMEDIT="$ac_cv_prog_NMEDIT"
-fi
-
-
-    { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-   # By default we will add the -single_module flag. You can override
-   # by either setting the environment variable LT_MULTI_MODULE
-   # non-empty at configure time, or by adding -multi_module to the
-   # link flags.
-   echo "int foo(void){return 1;}" > conftest.c
-   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-     -dynamiclib ${wl}-single_module conftest.c
-   if test -f libconftest.dylib; then
-     lt_cv_apple_cc_single_mod=yes
-     rm -rf libconftest.dylib*
-   fi
-   rm conftest.c
-      fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
-    { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  lt_cv_ld_exported_symbols_list=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	lt_cv_ld_exported_symbols_list=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-    case $host_os in
-    rhapsody* | darwin1.[0123])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*)
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-   10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-   10.[012]*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-   10.*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil="~$DSYMUTIL \$lib || :"
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-
-
-enable_dlopen=no
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
-  withval=$with_pic; pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-test -z "$pic_mode" && pic_mode=default
-
 # Use C for the default configuration in the libtool script
-tagname=
+
 lt_save_CC="$CC"
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -7503,6 +7377,11 @@ lt_simple_compile_test_code="int some_variable = 0;"
 lt_simple_link_test_code='int main(){return(0);}'
 
 
+
+
+
+
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -7512,35 +7391,38 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
 
 # save warnings/boilerplate of simple test code
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+$RM -r conftest*
 
 
+if test -n "$compiler"; then
 
 lt_prog_compiler_no_builtin_flag=
 
 if test "$GCC" = yes; then
   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
+   ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="-fno-rtti -fno-exceptions"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -7552,21 +7434,21 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7555: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7437: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7559: \$? = $ac_status" >&5
+   echo "$as_me:7441: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 
 fi
 { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
@@ -7580,7 +7462,12 @@ fi
 
 fi
 
-lt_prog_compiler_wl=
+
+
+
+
+
+  lt_prog_compiler_wl=
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
@@ -7601,17 +7488,25 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       ;;
 
     amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
       ;;
 
     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | cygwin* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
@@ -7625,6 +7520,20 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       lt_prog_compiler_pic='-fno-common'
       ;;
 
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
     interix[3-9]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
@@ -7637,25 +7546,18 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       enable_shared=no
       ;;
 
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
     sysv4*MP*)
       if test -d /usr/nec; then
 	lt_prog_compiler_pic=-Kconform_pic
       fi
       ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='-fPIC'
-	;;
-      esac
-      ;;
-
     *)
       lt_prog_compiler_pic='-fPIC'
       ;;
@@ -7672,18 +7574,8 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic='-qnocommon'
-         lt_prog_compiler_wl='-Wl,'
-         ;;
-       esac
-       ;;
 
-    mingw* | cygwin* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic='-DDLL_EXPORT'
@@ -7711,18 +7603,27 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
     linux* | k*bsd*-gnu)
       case $cc_basename in
-      icc* | ecc*)
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
 	lt_prog_compiler_static='-static'
         ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -7735,8 +7636,14 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
         # All Alpha code is PIC.
         lt_prog_compiler_static='-non_shared'
         ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
       *)
-        case `$CC -V 2>&1 | sed 5q` in
+	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)
 	  # Sun C 5.9
 	  lt_prog_compiler_pic='-KPIC'
@@ -7754,6 +7661,17 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       esac
       ;;
 
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
     osf3* | osf4* | osf5*)
       lt_prog_compiler_wl='-Wl,'
       # All OSF/1 code is PIC.
@@ -7816,21 +7734,34 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
     esac
   fi
 
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
 { $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
 $as_echo "$lt_prog_compiler_pic" >&6; }
 
+
+
+
+
+
 #
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+  { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
 if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_pic_works=no
-  ac_outfile=conftest.$ac_objext
+   ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -7842,21 +7773,21 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7845: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7776: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7849: \$? = $ac_status" >&5
+   echo "$as_me:7780: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_pic_works=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 
 fi
 { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
@@ -7873,15 +7804,11 @@ else
 fi
 
 fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
+
+
+
+
+
 
 #
 # Check to make sure the static flag actually works.
@@ -7902,7 +7829,7 @@ else
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          lt_cv_prog_compiler_static_works=yes
@@ -7911,7 +7838,7 @@ else
        lt_cv_prog_compiler_static_works=yes
      fi
    fi
-   $rm -r conftest*
+   $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 
 fi
@@ -7925,13 +7852,73 @@ else
 fi
 
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:7881: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:7885: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
-   $rm -r conftest 2>/dev/null
+   $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
@@ -7946,43 +7933,45 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7949: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7936: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7953: \$? = $ac_status" >&5
+   echo "$as_me:7940: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
      fi
    fi
    chmod u+w . 2>&5
-   $rm conftest*
+   $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
    cd ..
-   rmdir conftest
-   $rm conftest*
+   $RM -r conftest
+   $RM conftest*
 
 fi
 { $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
 $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
 
+
+
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
   hard_links=yes
-  $rm conftest*
+  $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -7998,31 +7987,39 @@ else
   need_locks=no
 fi
 
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
   runpath_var=
   allow_undefined_flag=
-  enable_shared_with_static_runtimes=no
+  always_export_symbols=no
   archive_cmds=
   archive_expsym_cmds=
-  old_archive_From_new_cmds=
-  old_archive_from_expsyms_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
   export_dynamic_flag_spec=
-  whole_archive_flag_spec=
-  thread_safe_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
   hardcode_libdir_flag_spec=
   hardcode_libdir_flag_spec_ld=
   hardcode_libdir_separator=
-  hardcode_direct=no
   hardcode_minus_L=no
   hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
   link_all_deplibs=unknown
-  hardcode_automatic=no
   module_cmds=
   module_expsym_cmds=
-  always_export_symbols=no
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
   # include_expsyms should be a list of space-separated symbols to be *always*
   # included in the symbol list
   include_expsyms=
@@ -8038,19 +8035,9 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   # preloaded symbol tables.
   # Exclude shared library initialization/finalization symbols.
   extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
-  cygwin* | mingw* | pw32*)
+  cygwin* | mingw* | pw32* | cegcc*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
@@ -8076,16 +8063,16 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
     export_dynamic_flag_spec='${wl}--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec=
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
+    case `$LD -v 2>&1` in
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -8099,7 +8086,7 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	ld_shlibs=no
-	cat <<EOF 1>&2
+	cat <<_LT_EOF 1>&2
 
 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
@@ -8107,26 +8094,27 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 *** really care for shared libraries, you may want to modify your PATH
 *** so that a non-GNU linker is found, and then restart.
 
-EOF
+_LT_EOF
       fi
       ;;
 
     amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
       ;;
 
     beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	allow_undefined_flag=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
@@ -8136,16 +8124,16 @@ EOF
       fi
       ;;
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
@@ -8176,48 +8164,78 @@ EOF
       archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
 	tmp_addflag=
+	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
 	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
 	  tmp_addflag=' -i_dynamic -nofor_main' ;;
 	ifc* | ifort*)			# Intel Fortran compiler
 	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
 	esac
 	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec=
+	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
       else
-	ld_shlibs=no
+        ld_shlibs=no
       fi
       ;;
 
     netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
@@ -8227,9 +8245,9 @@ EOF
       ;;
 
     solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
 	ld_shlibs=no
-	cat <<EOF 1>&2
+	cat <<_LT_EOF 1>&2
 
 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
 *** create shared libraries on Solaris systems.  Therefore, libtool
@@ -8238,8 +8256,8 @@ EOF
 *** your PATH or compiler configuration so that the native linker is
 *** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
@@ -8263,10 +8281,14 @@ EOF
 _LT_EOF
 	;;
 	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    ld_shlibs=no
 	  fi
@@ -8282,7 +8304,7 @@ _LT_EOF
       ;;
 
     *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
@@ -8324,10 +8346,10 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
@@ -8336,10 +8358,10 @@ _LT_EOF
 	# need to do runtime linking.
 	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
 	  done
 	  ;;
 	esac
@@ -8356,28 +8378,30 @@ _LT_EOF
 
       archive_cmds=''
       hardcode_direct=yes
+      hardcode_direct_absolute=yes
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
 
       if test "$GCC" = yes; then
 	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
-  	  # We have reworked collect2
-  	  :
+	  # We have reworked collect2
+	  :
 	  else
-  	  # We have old collect2
-  	  hardcode_direct=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L=yes
-  	  hardcode_libdir_flag_spec='-L$libdir'
-  	  hardcode_libdir_separator=
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
 	  fi
 	  ;;
 	esac
@@ -8388,8 +8412,8 @@ _LT_EOF
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
 	  if test "$aix_use_runtimelinking" = yes; then
@@ -8400,6 +8424,7 @@ _LT_EOF
 	fi
       fi
 
+      export_dynamic_flag_spec='${wl}-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       always_export_symbols=yes
@@ -8407,8 +8432,9 @@ _LT_EOF
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	allow_undefined_flag='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -8469,15 +8495,16 @@ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
 	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
-	 # Determine the default libpath from the value encoded in an empty executable.
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -8554,18 +8581,25 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs=no
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
       ;;
 
     bsdi[45]*)
       export_dynamic_flag_spec=-rdynamic
       ;;
 
-    cygwin* | mingw* | pw32*)
+    cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
@@ -8577,9 +8611,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds='true'
+      old_archive_from_new_cmds='true'
       # FIXME: Should let the user specify the lib program.
       old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
       fix_srcfile_path='`cygpath -w "$srcfile"`'
@@ -8587,52 +8621,30 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc=no
-      hardcode_direct=no
-      hardcode_automatic=yes
-      hardcode_shlibpath_var=unsupported
-      whole_archive_flag_spec=''
-      link_all_deplibs=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs=no
-          ;;
-      esac
-    fi
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  whole_archive_flag_spec=''
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
       ;;
 
     dgux*)
@@ -8674,9 +8686,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
     hpux9*)
       if test "$GCC" = yes; then
-	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
-	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
       hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
       hardcode_libdir_separator=:
@@ -8696,11 +8708,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       if test "$with_gnu_ld" = no; then
 	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_flag_spec_ld='+b $libdir'
 	hardcode_libdir_separator=:
-
 	hardcode_direct=yes
+	hardcode_direct_absolute=yes
 	export_dynamic_flag_spec='${wl}-E'
-
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	hardcode_minus_L=yes
@@ -8714,7 +8726,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
@@ -8739,12 +8751,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
 	case $host_cpu in
 	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld='+b $libdir'
 	  hardcode_direct=no
 	  hardcode_shlibpath_var=no
 	  ;;
 	*)
 	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
 	  export_dynamic_flag_spec='${wl}-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
@@ -8757,18 +8769,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        cat >conftest.$ac_ext <<_ACEOF
+int foo(void) {}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+        LDFLAGS="$save_LDFLAGS"
       else
-	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld='-rpath $libdir'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       hardcode_libdir_separator=:
+      inherit_rpath=yes
       link_all_deplibs=yes
       ;;
 
     netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
 	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
@@ -8786,11 +8842,15 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       ;;
 
+    *nto* | *qnx*)
+      ;;
+
     openbsd*)
       if test -f /usr/libexec/ld.so; then
 	hardcode_direct=yes
 	hardcode_shlibpath_var=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
 	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
@@ -8806,7 +8866,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
 	     ;;
 	  esac
-        fi
+	fi
       else
 	ld_shlibs=no
       fi
@@ -8816,18 +8876,19 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       hardcode_libdir_separator=:
       ;;
@@ -8835,32 +8896,43 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
       fi
+      archive_cmds_need_lc='no'
       hardcode_libdir_separator=:
       ;;
 
     solaris*)
-      no_undefined_flag=' -z text'
+      no_undefined_flag=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
-	wlarc=''
-	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
       fi
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_shlibpath_var=no
@@ -8870,7 +8942,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# The compiler driver will combine and reorder linker options,
 	# but understands `-z linker_flag'.  GCC discards it without `$wl',
 	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
 	if test "$GCC" = yes; then
 	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
 	else
@@ -8959,18 +9031,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       allow_undefined_flag='${wl}-z,nodefs'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
       export_dynamic_flag_spec='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
 
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -8984,12 +9056,36 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs=no
       ;;
     esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
   fi
 
 { $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
 $as_echo "$ld_shlibs" >&6; }
 test "$ld_shlibs" = no && can_build_shared=no
 
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 #
 # Do we need to explicitly link libc?
 #
@@ -9009,7 +9105,7 @@ x|xyes)
       # to ld, don't add -lc before -lgcc.
       { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
+      $RM conftest*
       echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
       if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
@@ -9030,8 +9126,8 @@ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
         libname=conftest
         lt_save_allow_undefined_flag=$allow_undefined_flag
         allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
   $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
@@ -9044,7 +9140,7 @@ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
       else
         cat conftest.err 1>&5
       fi
-      $rm conftest*
+      $RM conftest*
       { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
 $as_echo "$archive_cmds_need_lc" >&6; }
       ;;
@@ -9053,21 +9149,164 @@ $as_echo "$archive_cmds_need_lc" >&6; }
   ;;
 esac
 
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
 
 if test "$GCC" = yes; then
   case $host_os in
@@ -9075,14 +9314,14 @@ if test "$GCC" = yes; then
     *) lt_awk_arg="/^libraries:/" ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
   else
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
   fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
@@ -9096,7 +9335,7 @@ if test "$GCC" = yes; then
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -9116,10 +9355,23 @@ BEGIN {RS=" "; FS="/|\n";} {
   if (lt_foo != "") { lt_freq[lt_foo]++; }
   if (lt_freq[lt_foo] == 1) { print lt_foo; }
 }'`
-  sys_lib_search_path_spec=`echo $lt_search_path_spec`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -9156,7 +9408,7 @@ aix[4-9]*)
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
@@ -9182,9 +9434,18 @@ aix[4-9]*)
   ;;
 
 amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
   ;;
 
 beos*)
@@ -9207,25 +9468,28 @@ bsdi[45]*)
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
-       $rm \$dlpath'
+       $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
@@ -9234,20 +9498,20 @@ cygwin* | mingw* | pw32*)
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH printed by
         # mingw gcc, but we are running on Cygwin. Gcc prints its search
         # path with ; separators, and with drive letters. We can handle the
         # drive letters (cygwin fileutils understands them), so leave them,
         # especially as we might pass files found there to a mingw objdump,
         # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
       ;;
     pw32*)
@@ -9271,7 +9535,7 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
@@ -9370,18 +9634,18 @@ hpux9* | hpux10* | hpux11*)
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
@@ -9458,16 +9722,75 @@ linux* | k*bsd*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
+  shlibpath_overrides_runpath=yes
+fi
+
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
+
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
   fi
 
@@ -9484,7 +9807,7 @@ netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
@@ -9505,14 +9828,16 @@ newsos6)
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx*)
-  version_type=linux
+*nto* | *qnx*)
+  version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
@@ -9521,13 +9846,13 @@ openbsd*)
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[89] | openbsd2.[89].*)
 	shlibpath_overrides_runpath=no
@@ -9599,7 +9924,6 @@ sysv4 | sysv4.3*)
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
@@ -9630,13 +9954,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -9646,6 +9969,17 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -9661,39 +9995,117 @@ esac
 $as_echo "$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
 if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 fi
 
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
 
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var" || \
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
    test "X$hardcode_automatic" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
+  # We can hardcode non-existent directories.
   if test "$hardcode_direct" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
      test "$hardcode_minus_L" != no; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action=relink
@@ -9709,7 +10121,8 @@ fi
 { $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
 $as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink; then
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -9718,37 +10131,12 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   enable_fast_install=needless
 fi
 
-striplib=
-old_striplib=
-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         old_striplib="$STRIP -S"
-         { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-       else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-       ;;
-   *)
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-    ;;
-  esac
-fi
 
-if test "x$enable_dlopen" != xyes; then
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -9763,15 +10151,15 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   darwin*)
   # if libdl is installed we need to link against it
@@ -9850,7 +10238,7 @@ else
 
 fi
 
-   ;;
+    ;;
 
   *)
     { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
@@ -10347,8 +10735,8 @@ else
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 10351 "configure"
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 10739 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10389,10 +10777,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -10408,9 +10792,9 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }
-EOF
+_LT_EOF
   if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   (eval $ac_link) 2>&5
   ac_status=$?
@@ -10447,8 +10831,8 @@ else
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 10451 "configure"
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 10835 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10489,10 +10873,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -10508,9 +10888,9 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }
-EOF
+_LT_EOF
   if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   (eval $ac_link) 2>&5
   ac_status=$?
@@ -10554,9334 +10934,103 @@ $as_echo "$lt_cv_dlopen_self_static" >&6; }
 fi
 
 
-# Report which library types will actually be built
-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix[4-9]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler \
-    CC \
-    LD \
-    lt_prog_compiler_wl \
-    lt_prog_compiler_pic \
-    lt_prog_compiler_static \
-    lt_prog_compiler_no_builtin_flag \
-    export_dynamic_flag_spec \
-    thread_safe_flag_spec \
-    whole_archive_flag_spec \
-    enable_shared_with_static_runtimes \
-    old_archive_cmds \
-    old_archive_from_new_cmds \
-    predep_objects \
-    postdep_objects \
-    predeps \
-    postdeps \
-    compiler_lib_search_path \
-    compiler_lib_search_dirs \
-    archive_cmds \
-    archive_expsym_cmds \
-    postinstall_cmds \
-    postuninstall_cmds \
-    old_archive_from_expsyms_cmds \
-    allow_undefined_flag \
-    no_undefined_flag \
-    export_symbols_cmds \
-    hardcode_libdir_flag_spec \
-    hardcode_libdir_flag_spec_ld \
-    hardcode_libdir_separator \
-    hardcode_automatic \
-    module_cmds \
-    module_expsym_cmds \
-    lt_cv_prog_compiler_c_o \
-    fix_srcfile_path \
-    exclude_expsyms \
-    include_expsyms; do
-
-    case $var in
-    old_archive_cmds | \
-    old_archive_from_new_cmds | \
-    archive_cmds | \
-    archive_expsym_cmds | \
-    module_cmds | \
-    module_expsym_cmds | \
-    old_archive_from_expsyms_cmds | \
-    export_symbols_cmds | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  { $as_echo "$as_me:$LINENO: creating $ofile" >&5
-$as_echo "$as_me: creating $ofile" >&6;}
-
-  cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
-  withval=$with_tags; tagnames="$withval"
-fi
-
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-    else
-      { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-    "") ;;
-    *)  { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-$as_echo "$as_me: error: invalid tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-hardcode_shlibpath_var_CXX=unsupported
-hardcode_automatic_CXX=no
-module_cmds_CXX=
-module_expsym_cmds_CXX=
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-enable_shared_with_static_runtimes_CXX=no
-
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-compiler_lib_search_dirs_CXX=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-objext_CXX=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
-  lt_prog_compiler_no_builtin_flag_CXX=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
-  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { $as_echo "$as_me:$LINENO: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
 
 
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
-    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
 
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      whole_archive_flag_spec_CXX=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
 
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
 
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
 
-# PORTME: fill in a description of your system's C++ link characteristics
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  aix[4-9]*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
 
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
 
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    archive_cmds_CXX=''
-    hardcode_direct_CXX=yes
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  :
-	else
-	  # We have old collect2
-	  hardcode_direct_CXX=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L_CXX=yes
-	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  hardcode_libdir_separator_CXX=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
 
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    always_export_symbols_CXX=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag_CXX='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag_CXX="-z nodefs"
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	no_undefined_flag_CXX=' ${wl}-bernotok'
-	allow_undefined_flag_CXX=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	whole_archive_flag_spec_CXX='$convenience'
-	archive_cmds_need_lc_CXX=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag_CXX=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-    # as there is no search path for DLLs.
-    hardcode_libdir_flag_spec_CXX='-L$libdir'
-    allow_undefined_flag_CXX=unsupported
-    always_export_symbols_CXX=no
-    enable_shared_with_static_runtimes_CXX=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-      archive_cmds_need_lc_CXX=no
-      hardcode_direct_CXX=no
-      hardcode_automatic_CXX=yes
-      hardcode_shlibpath_var_CXX=unsupported
-      whole_archive_flag_spec_CXX=''
-      link_all_deplibs_CXX=yes
-      allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
-      if test "$GXX" = yes ; then
-      output_verbose_link_cmd='echo'
-      archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-      module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-      module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-        archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-        archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-      fi
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_CXX=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  freebsd[12]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    ld_shlibs_CXX=no
-    ;;
-  freebsd-elf*)
-    archive_cmds_need_lc_CXX=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    ld_shlibs_CXX=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    hardcode_direct_CXX=yes
-    hardcode_minus_L_CXX=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      ld_shlibs_CXX=no
-      ;;
-    aCC*)
-      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        ld_shlibs_CXX=no
-      fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_CXX=:
-
-      case $host_cpu in
-      hppa*64*|ia64*) ;;
-      *)
-	export_dynamic_flag_spec_CXX='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      hardcode_direct_CXX=no
-      hardcode_shlibpath_var_CXX=no
-      ;;
-    *)
-      hardcode_direct_CXX=yes
-      hardcode_minus_L_CXX=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
-    esac
-
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    hppa*64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    *)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  interix[3-9]*)
-    hardcode_direct_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	link_all_deplibs_CXX=yes
-	;;
-    esac
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	esac
-	archive_cmds_need_lc_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC* | pgcpp*)
-        # Portland Group C++ compiler
-	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C++ 5.9
-	  no_undefined_flag_CXX=' -zdefs'
-	  archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	  hardcode_libdir_flag_spec_CXX='-R$libdir'
-	  whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
-	  # Not sure whether something based on
-	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	  # would be better.
-	  output_verbose_link_cmd='echo'
-
-	  # Archives containing C++ object files must be created using
-	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	  # necessary to make sure instantiated templates are included
-	  # in the archive.
-	  old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-	  ;;
-	esac
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      hardcode_libdir_flag_spec_CXX='-R$libdir'
-      hardcode_direct_CXX=yes
-      hardcode_shlibpath_var_CXX=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    ld_shlibs_CXX=no
-    ;;
-  openbsd*)
-    if test -f /usr/libexec/ld.so; then
-      hardcode_direct_CXX=yes
-      hardcode_shlibpath_var_CXX=no
-      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	export_dynamic_flag_spec_CXX='${wl}-E'
-	whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      fi
-      output_verbose_link_cmd='echo'
-    else
-      ld_shlibs_CXX=no
-    fi
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
 
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
 
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' -expect_unresolved \*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        archive_cmds_need_lc_CXX=yes
-	no_undefined_flag_CXX=' -zdefs'
-	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-R$libdir'
-	hardcode_shlibpath_var_CXX=no
-	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    # The compiler driver will combine and reorder linker options,
-	    # but understands `-z linker_flag'.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
-	    ;;
-	esac
-	link_all_deplibs_CXX=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-	  case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	    ;;
-	  esac
-	fi
-	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-    no_undefined_flag_CXX='${wl}-z,text'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    no_undefined_flag_CXX='${wl}-z,text'
-    allow_undefined_flag_CXX='${wl}-z,nodefs'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-    export_dynamic_flag_spec_CXX='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-    esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-GCC_CXX="$GXX"
-LD_CXX="$LD"
-
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
-	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
-	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
-	 else
-	   predep_objects_CXX="$predep_objects_CXX $p"
-	 fi
-       else
-	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
-	 else
-	   postdep_objects_CXX="$postdep_objects_CXX $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling CXX test program"
-fi
-
-$rm -f confest.$objext
-
-compiler_lib_search_dirs_CXX=
-if test -n "$compiler_lib_search_path_CXX"; then
-  compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-
-# PORTME: override above test on systems where it is broken
-case $host_os in
-interix[3-9]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  predep_objects_CXX=
-  postdep_objects_CXX=
-  postdeps_CXX=
-  ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-    #
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-esac
-
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    lt_prog_compiler_wl_CXX='-Wl,'
-    lt_prog_compiler_static_CXX='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_CXX='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_CXX='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      lt_prog_compiler_pic_CXX=
-      ;;
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_CXX=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	;;
-      *)
-	lt_prog_compiler_pic_CXX='-fPIC'
-	;;
-      esac
-      ;;
-    *)
-      lt_prog_compiler_pic_CXX='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[4-9]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  lt_prog_compiler_static_CXX='-Bstatic'
-	else
-	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           lt_prog_compiler_pic_CXX='-qnocommon'
-           lt_prog_compiler_wl_CXX='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      lt_prog_compiler_pic_CXX='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      lt_prog_compiler_pic_CXX='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler.
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-fpic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      lt_prog_compiler_pic_CXX='-KPIC'
-	      lt_prog_compiler_static_CXX='-Bstatic'
-	      lt_prog_compiler_wl_CXX='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    lt_prog_compiler_pic_CXX='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    lt_prog_compiler_wl_CXX='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    lt_prog_compiler_pic_CXX='-pic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	lt_prog_compiler_can_build_shared_CXX=no
-	;;
-    esac
-  fi
-
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_CXX=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12860: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:12864: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_CXX=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
-    case $lt_prog_compiler_pic_CXX in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-     esac
-else
-    lt_prog_compiler_pic_CXX=
-     lt_prog_compiler_can_build_shared_CXX=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_CXX=
-    ;;
-  *)
-    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_CXX=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_CXX=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_CXX=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
-    :
-else
-    lt_prog_compiler_static_CXX=
-fi
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_CXX=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12964: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:12968: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_CXX=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
+striplib=
+old_striplib=
+{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 else
-  need_locks=no
-fi
-
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
-  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[4-9]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-  ;;
-  *)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_CXX" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_CXX=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_CXX in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_CXX
-	pic_flag=$lt_prog_compiler_pic_CXX
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-        allow_undefined_flag_CXX=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_CXX=no
-        else
-	  archive_cmds_need_lc_CXX=yes
-        fi
-        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-$as_echo "$archive_cmds_need_lc_CXX" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
+# FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
     else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
     ;;
   *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
-
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var_CXX" || \
-   test "X$hardcode_automatic_CXX" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_CXX" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_CXX=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_CXX=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_CXX=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-$as_echo "$hardcode_action_CXX" >&6; }
-
-if test "$hardcode_action_CXX" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_CXX \
-    CC_CXX \
-    LD_CXX \
-    lt_prog_compiler_wl_CXX \
-    lt_prog_compiler_pic_CXX \
-    lt_prog_compiler_static_CXX \
-    lt_prog_compiler_no_builtin_flag_CXX \
-    export_dynamic_flag_spec_CXX \
-    thread_safe_flag_spec_CXX \
-    whole_archive_flag_spec_CXX \
-    enable_shared_with_static_runtimes_CXX \
-    old_archive_cmds_CXX \
-    old_archive_from_new_cmds_CXX \
-    predep_objects_CXX \
-    postdep_objects_CXX \
-    predeps_CXX \
-    postdeps_CXX \
-    compiler_lib_search_path_CXX \
-    compiler_lib_search_dirs_CXX \
-    archive_cmds_CXX \
-    archive_expsym_cmds_CXX \
-    postinstall_cmds_CXX \
-    postuninstall_cmds_CXX \
-    old_archive_from_expsyms_cmds_CXX \
-    allow_undefined_flag_CXX \
-    no_undefined_flag_CXX \
-    export_symbols_cmds_CXX \
-    hardcode_libdir_flag_spec_CXX \
-    hardcode_libdir_flag_spec_ld_CXX \
-    hardcode_libdir_separator_CXX \
-    hardcode_automatic_CXX \
-    module_cmds_CXX \
-    module_expsym_cmds_CXX \
-    lt_cv_prog_compiler_c_o_CXX \
-    fix_srcfile_path_CXX \
-    exclude_expsyms_CXX \
-    include_expsyms_CXX; do
-
-    case $var in
-    old_archive_cmds_CXX | \
-    old_archive_from_new_cmds_CXX | \
-    archive_cmds_CXX | \
-    archive_expsym_cmds_CXX | \
-    module_cmds_CXX | \
-    module_expsym_cmds_CXX | \
-    old_archive_from_expsyms_cmds_CXX | \
-    export_symbols_cmds_CXX | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
     ;;
   esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_CXX
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_CXX
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
 fi
 
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
-      program t
-      end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
 
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
 
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+  # Report which library types will actually be built
+  { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
 $as_echo_n "checking if libtool supports shared libraries... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+  { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
 $as_echo "$can_build_shared" >&6; }
 
-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+  { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
 $as_echo_n "checking whether to build shared libraries... " >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix[4-9]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-GCC_F77="$G77"
-LD_F77="$LD"
-
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_F77='-Wl,'
-    lt_prog_compiler_static_F77='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_F77='-fno-common'
-      ;;
-
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_F77=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_F77=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='-fPIC'
-	;;
-      esac
-      ;;
-
-    *)
-      lt_prog_compiler_pic_F77='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      else
-	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_F77='-qnocommon'
-         lt_prog_compiler_wl_F77='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-KPIC'
-	lt_prog_compiler_static_F77='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-fpic'
-	lt_prog_compiler_static_F77='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_F77='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_F77='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic_F77='-KPIC'
-	  lt_prog_compiler_static_F77='-Bstatic'
-	  lt_prog_compiler_wl_F77='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic_F77='-KPIC'
-	  lt_prog_compiler_static_F77='-Bstatic'
-	  lt_prog_compiler_wl_F77=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    rdos*)
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_F77='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_F77='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl_F77='-Qoption ld '
-      lt_prog_compiler_pic_F77='-PIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_F77='-Kconform_pic'
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic_F77='-pic'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
-    esac
-  fi
-
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-$as_echo "$lt_prog_compiler_pic_F77" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_F77"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_F77=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_F77"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14549: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:14553: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_F77=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
-    case $lt_prog_compiler_pic_F77 in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-     esac
-else
-    lt_prog_compiler_pic_F77=
-     lt_prog_compiler_can_build_shared_F77=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_F77=
-    ;;
-  *)
-    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_F77=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_F77=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_F77=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
-    :
-else
-    lt_prog_compiler_static_F77=
-fi
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_F77=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14653: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:14657: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_F77=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
-  runpath_var=
-  allow_undefined_flag_F77=
-  enable_shared_with_static_runtimes_F77=no
-  archive_cmds_F77=
-  archive_expsym_cmds_F77=
-  old_archive_From_new_cmds_F77=
-  old_archive_from_expsyms_cmds_F77=
-  export_dynamic_flag_spec_F77=
-  whole_archive_flag_spec_F77=
-  thread_safe_flag_spec_F77=
-  hardcode_libdir_flag_spec_F77=
-  hardcode_libdir_flag_spec_ld_F77=
-  hardcode_libdir_separator_F77=
-  hardcode_direct_F77=no
-  hardcode_minus_L_F77=no
-  hardcode_shlibpath_var_F77=unsupported
-  link_all_deplibs_F77=unknown
-  hardcode_automatic_F77=no
-  module_cmds_F77=
-  module_expsym_cmds_F77=
-  always_export_symbols_F77=no
-  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_F77=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+  test "$can_build_shared" = "no" && enable_shared=no
 
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
   case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs_F77=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_F77=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_F77=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_F77=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=no
-      enable_shared_with_static_runtimes_F77=yes
-      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    interix[3-9]*)
-      hardcode_direct_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_F77='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_F77=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_F77=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs_F77" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_F77=
-      export_dynamic_flag_spec_F77=
-      whole_archive_flag_spec_F77=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=yes
-      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_F77=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_F77=unsupported
-      fi
-      ;;
-
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds_F77=''
-      hardcode_direct_F77=yes
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_F77=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_F77=yes
-  	  hardcode_libdir_flag_spec_F77='-L$libdir'
-  	  hardcode_libdir_separator_F77=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_F77=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_F77='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-      program main
-
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_F77="-z nodefs"
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-      program main
-
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_F77=' ${wl}-bernotok'
-	  allow_undefined_flag_F77=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_F77='$convenience'
-	  archive_cmds_need_lc_F77=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_F77=no
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec_F77=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_F77=' '
-      allow_undefined_flag_F77=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_F77='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_F77=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_F77=no
-      hardcode_direct_F77=no
-      hardcode_automatic_F77=yes
-      hardcode_shlibpath_var_F77=unsupported
-      whole_archive_flag_spec_F77=''
-      link_all_deplibs_F77=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_F77=no
-          ;;
-      esac
-    fi
-      ;;
-
-    dgux*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs_F77=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_direct_F77=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
-
-	hardcode_direct_F77=yes
-	export_dynamic_flag_spec_F77='${wl}-E'
-
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_F77=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
-	  ;;
-	*)
-	  hardcode_direct_F77=yes
-	  export_dynamic_flag_spec_F77='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_F77=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      link_all_deplibs_F77=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    newsos6)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct_F77=yes
-	hardcode_shlibpath_var_F77=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec_F77='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec_F77='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      allow_undefined_flag_F77=unsupported
-      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_F77=:
-      ;;
-
-    solaris*)
-      no_undefined_flag_F77=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_shlibpath_var_F77=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs_F77=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_F77='$CC -r -o $output$reload_objs'
-	  hardcode_direct_F77=no
-        ;;
-	motorola)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_F77=no
-      export_dynamic_flag_spec_F77='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_F77=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_F77=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_F77='${wl}-z,text'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_F77='${wl}-z,text'
-      allow_undefined_flag_F77='${wl}-z,nodefs'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    *)
-      ld_shlibs_F77=no
-      ;;
-    esac
-  fi
-
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-$as_echo "$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_F77" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_F77=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_F77 in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_F77
-	pic_flag=$lt_prog_compiler_pic_F77
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-        allow_undefined_flag_F77=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_F77=no
-        else
-	  archive_cmds_need_lc_F77=yes
-        fi
-        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-$as_echo "$archive_cmds_need_lc_F77" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
-
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
-   test -n "$runpath_var_F77" || \
-   test "X$hardcode_automatic_F77" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_F77" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-     test "$hardcode_minus_L_F77" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_F77=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_F77=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_F77=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-$as_echo "$hardcode_action_F77" >&6; }
-
-if test "$hardcode_action_F77" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_F77 \
-    CC_F77 \
-    LD_F77 \
-    lt_prog_compiler_wl_F77 \
-    lt_prog_compiler_pic_F77 \
-    lt_prog_compiler_static_F77 \
-    lt_prog_compiler_no_builtin_flag_F77 \
-    export_dynamic_flag_spec_F77 \
-    thread_safe_flag_spec_F77 \
-    whole_archive_flag_spec_F77 \
-    enable_shared_with_static_runtimes_F77 \
-    old_archive_cmds_F77 \
-    old_archive_from_new_cmds_F77 \
-    predep_objects_F77 \
-    postdep_objects_F77 \
-    predeps_F77 \
-    postdeps_F77 \
-    compiler_lib_search_path_F77 \
-    compiler_lib_search_dirs_F77 \
-    archive_cmds_F77 \
-    archive_expsym_cmds_F77 \
-    postinstall_cmds_F77 \
-    postuninstall_cmds_F77 \
-    old_archive_from_expsyms_cmds_F77 \
-    allow_undefined_flag_F77 \
-    no_undefined_flag_F77 \
-    export_symbols_cmds_F77 \
-    hardcode_libdir_flag_spec_F77 \
-    hardcode_libdir_flag_spec_ld_F77 \
-    hardcode_libdir_separator_F77 \
-    hardcode_automatic_F77 \
-    module_cmds_F77 \
-    module_expsym_cmds_F77 \
-    lt_cv_prog_compiler_c_o_F77 \
-    fix_srcfile_path_F77 \
-    exclude_expsyms_F77 \
-    include_expsyms_F77; do
-
-    case $var in
-    old_archive_cmds_F77 | \
-    old_archive_from_new_cmds_F77 | \
-    archive_cmds_F77 | \
-    archive_expsym_cmds_F77 | \
-    module_cmds_F77 | \
-    module_expsym_cmds_F77 | \
-    old_archive_from_expsyms_cmds_F77 | \
-    export_symbols_cmds_F77 | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_F77
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_F77
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
-
-old_archive_cmds_GCJ=$old_archive_cmds
-
-
-lt_prog_compiler_no_builtin_flag_GCJ=
-
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16870: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:16874: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-else
-    :
-fi
-
-fi
-
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_GCJ='-Wl,'
-    lt_prog_compiler_static_GCJ='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_GCJ='-fno-common'
-      ;;
-
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_GCJ=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_GCJ=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='-fPIC'
-	;;
-      esac
-      ;;
-
-    *)
-      lt_prog_compiler_pic_GCJ='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      else
-	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_GCJ='-qnocommon'
-         lt_prog_compiler_wl_GCJ='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-KPIC'
-	lt_prog_compiler_static_GCJ='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-fpic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_GCJ='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_GCJ='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic_GCJ='-KPIC'
-	  lt_prog_compiler_static_GCJ='-Bstatic'
-	  lt_prog_compiler_wl_GCJ='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic_GCJ='-KPIC'
-	  lt_prog_compiler_static_GCJ='-Bstatic'
-	  lt_prog_compiler_wl_GCJ=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    rdos*)
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_GCJ='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl_GCJ='-Qoption ld '
-      lt_prog_compiler_pic_GCJ='-PIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_GCJ='-Kconform_pic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic_GCJ='-pic'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
-    esac
-  fi
-
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-$as_echo "$lt_prog_compiler_pic_GCJ" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_GCJ=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17160: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:17164: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_GCJ=yes
-     fi
-   fi
-   $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
-    case $lt_prog_compiler_pic_GCJ in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-     esac
-else
-    lt_prog_compiler_pic_GCJ=
-     lt_prog_compiler_can_build_shared_GCJ=no
-fi
-
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_GCJ=
-    ;;
-  *)
-    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_GCJ=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_GCJ=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_GCJ=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
-    :
-else
-    lt_prog_compiler_static_GCJ=
-fi
-
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_GCJ=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17264: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:17268: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_GCJ=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
-  runpath_var=
-  allow_undefined_flag_GCJ=
-  enable_shared_with_static_runtimes_GCJ=no
-  archive_cmds_GCJ=
-  archive_expsym_cmds_GCJ=
-  old_archive_From_new_cmds_GCJ=
-  old_archive_from_expsyms_cmds_GCJ=
-  export_dynamic_flag_spec_GCJ=
-  whole_archive_flag_spec_GCJ=
-  thread_safe_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_ld_GCJ=
-  hardcode_libdir_separator_GCJ=
-  hardcode_direct_GCJ=no
-  hardcode_minus_L_GCJ=no
-  hardcode_shlibpath_var_GCJ=unsupported
-  link_all_deplibs_GCJ=unknown
-  hardcode_automatic_GCJ=no
-  module_cmds_GCJ=
-  module_expsym_cmds_GCJ=
-  always_export_symbols_GCJ=no
-  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_GCJ=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs_GCJ=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_GCJ=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_GCJ=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_GCJ=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=no
-      enable_shared_with_static_runtimes_GCJ=yes
-      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    interix[3-9]*)
-      hardcode_direct_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_GCJ=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_GCJ=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs_GCJ" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_GCJ=
-      export_dynamic_flag_spec_GCJ=
-      whole_archive_flag_spec_GCJ=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=yes
-      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_GCJ=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_GCJ=unsupported
-      fi
-      ;;
-
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds_GCJ=''
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_GCJ=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_GCJ=yes
-  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-  	  hardcode_libdir_separator_GCJ=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_GCJ=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_GCJ='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_GCJ="-z nodefs"
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_GCJ=' ${wl}-bernotok'
-	  allow_undefined_flag_GCJ=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_GCJ='$convenience'
-	  archive_cmds_need_lc_GCJ=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_GCJ=no
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec_GCJ=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ=' '
-      allow_undefined_flag_GCJ=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_GCJ='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_GCJ=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_GCJ=no
-      hardcode_direct_GCJ=no
-      hardcode_automatic_GCJ=yes
-      hardcode_shlibpath_var_GCJ=unsupported
-      whole_archive_flag_spec_GCJ=''
-      link_all_deplibs_GCJ=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_GCJ=no
-          ;;
-      esac
-    fi
-      ;;
-
-    dgux*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs_GCJ=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_direct_GCJ=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-
-	hardcode_direct_GCJ=yes
-	export_dynamic_flag_spec_GCJ='${wl}-E'
-
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_GCJ=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
-	  ;;
-	*)
-	  hardcode_direct_GCJ=yes
-	  export_dynamic_flag_spec_GCJ='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_GCJ=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    newsos6)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct_GCJ=yes
-	hardcode_shlibpath_var_GCJ=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec_GCJ='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      allow_undefined_flag_GCJ=unsupported
-      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    solaris*)
-      no_undefined_flag_GCJ=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-	  hardcode_direct_GCJ=no
-        ;;
-	motorola)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_GCJ=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_GCJ=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_GCJ='${wl}-z,text'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_GCJ='${wl}-z,text'
-      allow_undefined_flag_GCJ='${wl}-z,nodefs'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      ld_shlibs_GCJ=no
-      ;;
-    esac
-  fi
-
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-$as_echo "$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_GCJ=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_GCJ in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_GCJ
-	pic_flag=$lt_prog_compiler_pic_GCJ
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-        allow_undefined_flag_GCJ=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_GCJ=no
-        else
-	  archive_cmds_need_lc_GCJ=yes
-        fi
-        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-$as_echo "$archive_cmds_need_lc_GCJ" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
     fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
     ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
 
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
     ;;
   esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
-
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var_GCJ" || \
-   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_GCJ" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-     test "$hardcode_minus_L_GCJ" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_GCJ=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_GCJ=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_GCJ=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-$as_echo "$hardcode_action_GCJ" >&6; }
-
-if test "$hardcode_action_GCJ" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_GCJ \
-    CC_GCJ \
-    LD_GCJ \
-    lt_prog_compiler_wl_GCJ \
-    lt_prog_compiler_pic_GCJ \
-    lt_prog_compiler_static_GCJ \
-    lt_prog_compiler_no_builtin_flag_GCJ \
-    export_dynamic_flag_spec_GCJ \
-    thread_safe_flag_spec_GCJ \
-    whole_archive_flag_spec_GCJ \
-    enable_shared_with_static_runtimes_GCJ \
-    old_archive_cmds_GCJ \
-    old_archive_from_new_cmds_GCJ \
-    predep_objects_GCJ \
-    postdep_objects_GCJ \
-    predeps_GCJ \
-    postdeps_GCJ \
-    compiler_lib_search_path_GCJ \
-    compiler_lib_search_dirs_GCJ \
-    archive_cmds_GCJ \
-    archive_expsym_cmds_GCJ \
-    postinstall_cmds_GCJ \
-    postuninstall_cmds_GCJ \
-    old_archive_from_expsyms_cmds_GCJ \
-    allow_undefined_flag_GCJ \
-    no_undefined_flag_GCJ \
-    export_symbols_cmds_GCJ \
-    hardcode_libdir_flag_spec_GCJ \
-    hardcode_libdir_flag_spec_ld_GCJ \
-    hardcode_libdir_separator_GCJ \
-    hardcode_automatic_GCJ \
-    module_cmds_GCJ \
-    module_expsym_cmds_GCJ \
-    lt_cv_prog_compiler_c_o_GCJ \
-    fix_srcfile_path_GCJ \
-    exclude_expsyms_GCJ \
-    include_expsyms_GCJ; do
-
-    case $var in
-    old_archive_cmds_GCJ | \
-    old_archive_from_new_cmds_GCJ | \
-    archive_cmds_GCJ | \
-    archive_expsym_cmds_GCJ | \
-    module_cmds_GCJ | \
-    module_expsym_cmds_GCJ | \
-    old_archive_from_expsyms_cmds_GCJ | \
-    export_symbols_cmds_GCJ | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-lt_cv_prog_compiler_c_o_RC=yes
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_RC \
-    CC_RC \
-    LD_RC \
-    lt_prog_compiler_wl_RC \
-    lt_prog_compiler_pic_RC \
-    lt_prog_compiler_static_RC \
-    lt_prog_compiler_no_builtin_flag_RC \
-    export_dynamic_flag_spec_RC \
-    thread_safe_flag_spec_RC \
-    whole_archive_flag_spec_RC \
-    enable_shared_with_static_runtimes_RC \
-    old_archive_cmds_RC \
-    old_archive_from_new_cmds_RC \
-    predep_objects_RC \
-    postdep_objects_RC \
-    predeps_RC \
-    postdeps_RC \
-    compiler_lib_search_path_RC \
-    compiler_lib_search_dirs_RC \
-    archive_cmds_RC \
-    archive_expsym_cmds_RC \
-    postinstall_cmds_RC \
-    postuninstall_cmds_RC \
-    old_archive_from_expsyms_cmds_RC \
-    allow_undefined_flag_RC \
-    no_undefined_flag_RC \
-    export_symbols_cmds_RC \
-    hardcode_libdir_flag_spec_RC \
-    hardcode_libdir_flag_spec_ld_RC \
-    hardcode_libdir_separator_RC \
-    hardcode_automatic_RC \
-    module_cmds_RC \
-    module_expsym_cmds_RC \
-    lt_cv_prog_compiler_c_o_RC \
-    fix_srcfile_path_RC \
-    exclude_expsyms_RC \
-    include_expsyms_RC; do
-
-    case $var in
-    old_archive_cmds_RC | \
-    old_archive_from_new_cmds_RC | \
-    archive_cmds_RC | \
-    archive_expsym_cmds_RC | \
-    module_cmds_RC | \
-    module_expsym_cmds_RC | \
-    old_archive_from_expsyms_cmds_RC | \
-    export_symbols_cmds_RC | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_RC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_RC
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
+  { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
+  { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
 
-# ### END LIBTOOL TAG CONFIG: $tagname
 
-__EOF__
 
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
 fi
-
-
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -19890,46 +11039,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 CC="$lt_save_CC"
 
-	;;
-
-      *)
-	{ { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-fi
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
 
 
 
@@ -19942,10 +11051,12 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
 
 
+        ac_config_commands="$ac_config_commands libtool"
 
 
 
 
+# Only expand once:
 
 
 
@@ -20656,13 +11767,13 @@ fi
 
 
 
-LT_VERSION_INFO="15:18:15"
+LT_VERSION_INFO="16:0:16"
 
 PIXMAN_VERSION_MAJOR=0
 
-PIXMAN_VERSION_MINOR=15
+PIXMAN_VERSION_MINOR=16
 
-PIXMAN_VERSION_MICRO=18
+PIXMAN_VERSION_MICRO=0
 
 
 
@@ -21436,11 +12547,13 @@ else
 fi
 
 
+if test $enable_timers = yes ; then
 
 cat >>confdefs.h <<\_ACEOF
 #define PIXMAN_TIMERS 1
 _ACEOF
 
+fi
 
 
 
@@ -21706,6 +12819,106 @@ fi
 
 
 
+
+{ $as_echo "$as_me:$LINENO: checking for posix_memalign" >&5
+$as_echo_n "checking for posix_memalign... " >&6; }
+if test "${ac_cv_func_posix_memalign+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define posix_memalign to an innocuous variant, in case <limits.h> declares posix_memalign.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define posix_memalign innocuous_posix_memalign
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char posix_memalign (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef posix_memalign
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char posix_memalign ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_posix_memalign || defined __stub___posix_memalign
+choke me
+#endif
+
+int
+main ()
+{
+return posix_memalign ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_func_posix_memalign=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_func_posix_memalign=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_posix_memalign" >&5
+$as_echo "$ac_cv_func_posix_memalign" >&6; }
+if test "x$ac_cv_func_posix_memalign" = x""yes; then
+  have_posix_memalign=yes
+else
+  have_posix_memalign=no
+fi
+
+if test x$have_posix_memalign = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_POSIX_MEMALIGN 1
+_ACEOF
+
+fi
+
 ac_config_files="$ac_config_files pixman-1.pc pixman-1-uninstalled.pc Makefile pixman/Makefile pixman/pixman-version.h test/Makefile"
 
 cat >confcache <<\_ACEOF
@@ -21819,13 +13032,6 @@ $as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
 
 if test -z "${USE_MMX_TRUE}" && test -z "${USE_MMX_FALSE}"; then
   { { $as_echo "$as_me:$LINENO: error: conditional \"USE_MMX\" was never defined.
@@ -22198,7 +13404,7 @@ exec 6>&1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by pixman $as_me 0.15.18, which was
+This file was extended by pixman $as_me 0.16.0, which was
 generated by GNU Autoconf 2.63.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -22261,7 +13467,7 @@ Report bugs to <bug-autoconf@gnu.org>."
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-pixman config.status 0.15.18
+pixman config.status 0.16.0
 configured by $0, generated by GNU Autoconf 2.63,
   with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
@@ -22376,6 +13582,261 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+  ;;
+esac
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
@@ -22386,6 +13847,7 @@ do
   case $ac_config_target in
     "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
     "pixman-1.pc") CONFIG_FILES="$CONFIG_FILES pixman-1.pc" ;;
     "pixman-1-uninstalled.pc") CONFIG_FILES="$CONFIG_FILES pixman-1-uninstalled.pc" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
@@ -23046,7 +14508,16 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
 
 
   case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files
+# are listed without --file.  Let's play safe and only enable the eval
+# if we detect the quoting.
+case $CONFIG_FILES in
+*\'*) eval set x "$CONFIG_FILES" ;;
+*)   set x $CONFIG_FILES ;;
+esac
+shift
+for mf
+do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -23170,6 +14641,641 @@ $as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
   done
 done
  ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking.  This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $* ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
+
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[^=]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$@"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1+=\$2"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1=\$$1\$2"
+}
+
+_LT_EOF
+    ;;
+  esac
+
+
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
 
   esac
 done # for ac_tag
diff --git a/pixman/configure.ac b/pixman/configure.ac
index 7d825b763..937fae787 100644
--- a/pixman/configure.ac
+++ b/pixman/configure.ac
@@ -31,7 +31,7 @@ AC_PREREQ([2.57])
 #
 #   - Released development versions have an odd MINOR number
 #
-#   - Released stable versions have an event MINOR number
+#   - Released stable versions have an even MINOR number
 #
 #   - Versions that break ABI must have a new MAJOR number
 #
@@ -53,8 +53,8 @@ AC_PREREQ([2.57])
 #
 
 m4_define([pixman_major], 0)
-m4_define([pixman_minor], 15)
-m4_define([pixman_micro], 18)
+m4_define([pixman_minor], 16)
+m4_define([pixman_micro], 0)
 
 m4_define([pixman_version],[pixman_major.pixman_minor.pixman_micro])
 
@@ -462,7 +462,9 @@ AC_ARG_ENABLE(timers,
 		   [enable TIMER_BEGIN and TIMER_END macros [default=no]])],
    [enable_timers=$enableval], [enable_timers=no])
 
-AC_DEFINE(PIXMAN_TIMERS, 1, [enable TIMER_BEGIN/TIMER_END macros])
+if test $enable_timers = yes ; then 
+   AC_DEFINE(PIXMAN_TIMERS, 1, [enable TIMER_BEGIN/TIMER_END macros])
+fi
 AC_SUBST(PIXMAN_TIMERS)
 
 dnl ===================================
@@ -488,6 +490,14 @@ AC_SUBST(GTK_LIBS)
 AC_SUBST(DEP_CFLAGS)
 AC_SUBST(DEP_LIBS)
 
+dnl =====================================
+dnl posix_memalign 
+
+AC_CHECK_FUNC(posix_memalign, have_posix_memalign=yes, have_posix_memalign=no)
+if test x$have_posix_memalign = xyes; then
+   AC_DEFINE(HAVE_POSIX_MEMALIGN, 1, [Whether we have posix_memalign()])
+fi
+
 AC_OUTPUT([pixman-1.pc
            pixman-1-uninstalled.pc
            Makefile
diff --git a/pixman/ltmain.sh b/pixman/ltmain.sh
index 2bcb8482c..6939dcc4a 100644
--- a/pixman/ltmain.sh
+++ b/pixman/ltmain.sh
@@ -1,52 +1,83 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008  Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
+# Generated from ltmain.m4sh.
+
+# ltmain.sh (GNU libtool) 2.2.6
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
 # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+#     --config             show all configuration variables
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
+#
+# MODE must be one of the following:
+#
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#       host-triplet:	$host
+#       shell:		$SHELL
+#       compiler:		$LTCC
+#       compiler flags:		$LTCFLAGS
+#       linker:		$LD (gnu? $with_gnu_ld)
+#       $progname:		(GNU libtool) 2.2.6
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.5.26
-TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)"
+VERSION=2.2.6
+TIMESTAMP=""
+package_revision=1.3012
 
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+# Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
@@ -60,104 +91,261 @@ fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  SP2NL='tr \040 \012'
-  NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  SP2NL='tr \100 \n'
-  NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-# NLS nuisances.
+# NLS nuisances: We save the old values to restore during execute mode.
 # Only set LANG and LC_ALL to C if already set.
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-lt_env=
+lt_user_locale=
+lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 do
   eval "if test \"\${$lt_var+set}\" = set; then
-	  save_$lt_var=\$$lt_var
-	  lt_env=\"$lt_var=\$$lt_var \$lt_env\"
-	  $lt_var=C
+          save_$lt_var=\$$lt_var
+          $lt_var=C
 	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 	fi"
 done
 
-if test -n "$lt_env"; then
-  lt_env="env $lt_env"
-fi
+$lt_unset CDPATH
+
+
+
+
+
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/bin/sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
 
 # Make sure IFS has a sensible default
 lt_nl='
 '
 IFS=" 	$lt_nl"
 
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  $echo "$modename: not configured to build any kind of library" 1>&2
-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
-fi
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
 
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# Generated shell functions inserted here.
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=:
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname${mode+: }$mode: $*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
 
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
 
 # func_mktempdir [string]
 # Make a temporary directory that won't clash with other running
@@ -167,7 +355,7 @@ func_mktempdir ()
 {
     my_template="${TMPDIR-/tmp}/${1-$progname}"
 
-    if test "$run" = ":"; then
+    if test "$opt_dry_run" = ":"; then
       # Return a directory name, but don't create it in dry-run mode
       my_tmpdir="${my_template}-$$"
     else
@@ -176,486 +364,743 @@ func_mktempdir ()
       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
       if test ! -d "$my_tmpdir"; then
-	# Failing that, at least try and use $RANDOM to avoid a race
-	my_tmpdir="${my_template}-${RANDOM-0}$$"
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
 
-	save_mktempdir_umask=`umask`
-	umask 0077
-	$mkdir "$my_tmpdir"
-	umask $save_mktempdir_umask
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
       fi
 
       # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || {
-        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
-	exit $EXIT_FAILURE
-      }
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $echo "X$my_tmpdir" | $Xsed
+    $ECHO "X$my_tmpdir" | $Xsed
 }
 
 
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
 {
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 | \
-	$SED -n -e '1,100{
-		/ I /{
-			s,.*,import,
-			p
-			q
-			}
-		}'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
     esac
-    ;;
-  esac
-  $echo $win32_libid_type
 }
 
 
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
 {
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "X$1" | $Xsed \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
-	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
 }
 
 
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
 {
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
 
-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
-      exit $EXIT_FAILURE
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
     fi
 }
 
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
 {
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-    my_status=""
-
-    $show "${rm}r $my_gentop"
-    $run ${rm}r "$my_gentop"
-    $show "$mkdir $my_gentop"
-    $run $mkdir "$my_gentop"
-    my_status=$?
-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-      exit $my_status
-    fi
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
 
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-	*" $my_xlib_u "*)
-	  extracted_serial=`expr $extracted_serial + 1`
-	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
-	*) break ;;
-	esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
 
-      $show "${rm}r $my_xdir"
-      $run ${rm}r "$my_xdir"
-      $show "$mkdir $my_xdir"
-      $run $mkdir "$my_xdir"
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
-	exit $exit_status
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
       fi
-      case $host in
-      *-darwin*)
-	$show "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	if test -z "$run"; then
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-	  if test -n "$darwin_arches"; then 
-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    ${rm}r unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd "$darwin_orig_dir"
- 	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	fi # $run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-    func_extract_archives_result="$my_oldobjs"
+    fi
 }
-# End of Shell function definitions
-#####################################
 
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
 
-disable_libs=no
 
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $SED -n '/^# Usage:/,/# -h/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    $ECHO
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+	p
+     }' < "$progpath"
+    exit $?
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    func_error "missing argument for $1"
+    exit_cmd=exit
+}
+
+exit_cmd=:
+
+
+
+
+
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
   shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+  # Yippee, $ECHO works!
+  :
+else
+  # Restart under the correct shell, and then maybe $ECHO will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
 
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
 
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-      preserve_args="${preserve_args}=$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit $EXIT_FAILURE
-	;;
-      esac
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
 
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-	else
-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
+# Global variables.
+# $mode is unset
+nonopt=
+execute_dlfiles=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
 
-    prev=
-    prevopt=
-    continue
-  fi
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
 
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
 
-  --version)
-    echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
 
-Copyright (C) 2008  Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $?
-    ;;
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
 
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
     # Now print the configurations for the tags.
     for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
     done
-    exit $?
-    ;;
-
-  --debug)
-    $echo "$progname: enabling shell trace mode"
-    set -x
-    preserve_args="$preserve_args $arg"
-    ;;
 
-  --dry-run | -n)
-    run=:
-    ;;
+    exit $?
+}
 
-  --features)
-    $echo "host: $host"
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    $ECHO "host: $host"
     if test "$build_libtool_libs" = yes; then
-      $echo "enable shared libraries"
+      $ECHO "enable shared libraries"
     else
-      $echo "disable shared libraries"
+      $ECHO "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      $echo "enable static libraries"
+      $ECHO "enable static libraries"
     else
-      $echo "disable static libraries"
+      $ECHO "disable static libraries"
     fi
+
     exit $?
-    ;;
+}
 
-  --finish) mode="finish" ;;
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
 
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
 
-  --preserve-dup-deps) duplicate_deps="yes" ;;
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
 
-  --quiet | --silent)
-    show=:
-    preserve_args="$preserve_args $arg"
-    ;;
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# Parse options once, thoroughly.  This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
+{
 
-  --tag)
-    prevopt="--tag"
-    prev=tag
-    preserve_args="$preserve_args --tag"
+  # Shorthand for --mode=foo, only valid as the first argument
+  case $1 in
+  clean|clea|cle|cl)
+    shift; set dummy --mode clean ${1+"$@"}; shift
     ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    preserve_args="$preserve_args --tag"
+  compile|compil|compi|comp|com|co|c)
+    shift; set dummy --mode compile ${1+"$@"}; shift
     ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
+  execute|execut|execu|exec|exe|ex|e)
+    shift; set dummy --mode execute ${1+"$@"}; shift
     ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
+  finish|finis|fini|fin|fi|f)
+    shift; set dummy --mode finish ${1+"$@"}; shift
     ;;
-
-  *)
-    nonopt="$arg"
-    break
+  install|instal|insta|inst|ins|in|i)
+    shift; set dummy --mode install ${1+"$@"}; shift
+    ;;
+  link|lin|li|l)
+    shift; set dummy --mode link ${1+"$@"}; shift
+    ;;
+  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+    shift; set dummy --mode uninstall ${1+"$@"}; shift
     ;;
   esac
-done
 
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-fi
+  # Parse non-mode specific arguments:
+  while test "$#" -gt 0; do
+    opt="$1"
+    shift
 
-case $disable_libs in
-no) 
-  ;;
-shared)
-  build_libtool_libs=no
-  build_old_libs=yes
-  ;;
-static)
-  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-  ;;
-esac
+    case $opt in
+      --config)		func_config					;;
 
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
+      --debug)		preserve_args="$preserve_args $opt"
+			func_echo "enabling shell trace mode"
+			opt_debug='set -x'
+			$opt_debug
+			;;
 
-if test -z "$show_help"; then
+      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			execute_dlfiles="$execute_dlfiles $1"
+			shift
+			;;
 
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-    case $nonopt in
-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
+      --dry-run | -n)	opt_dry_run=:					;;
+      --features)       func_features					;;
+      --finish)		mode="finish"					;;
+
+      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			case $1 in
+			  # Valid mode arguments:
+			  clean)	;;
+			  compile)	;;
+			  execute)	;;
+			  finish)	;;
+			  install)	;;
+			  link)		;;
+			  relink)	;;
+			  uninstall)	;;
+
+			  # Catch anything else as an error
+			  *) func_error "invalid argument for $opt"
+			     exit_cmd=exit
+			     break
+			     ;;
+		        esac
+
+			mode="$1"
+			shift
+			;;
+
+      --preserve-dup-deps)
+			opt_duplicate_deps=:				;;
+
+      --quiet|--silent)	preserve_args="$preserve_args $opt"
+			opt_silent=:
+			;;
+
+      --verbose| -v)	preserve_args="$preserve_args $opt"
+			opt_silent=false
+			;;
+
+      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			preserve_args="$preserve_args $opt $1"
+			func_enable_tag "$1"	# tagname is set here
+			shift
+			;;
+
+      # Separate optargs to long options:
+      -dlopen=*|--mode=*|--tag=*)
+			func_opt_split "$opt"
+			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+			shift
+			;;
+
+      -\?|-h)		func_usage					;;
+      --help)		opt_help=:					;;
+      --version)	func_version					;;
+
+      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
+
+      *)		nonopt="$opt"
+			break
+			;;
+    esac
+  done
+
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
       ;;
     *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
+      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+      ;;
+  esac
 
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
+  # Having warned about all mis-specified options, bail out if
+  # anything was wrong.
+  $exit_cmd $EXIT_FAILURE
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
       fi
-      ;;
-    esac
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+$opt_help || {
+  # Sanity checks first:
+  func_check_version_match
+
+  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+    func_fatal_configuration "not configured to build any kind of library"
   fi
 
+  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+
+
+  # Darwin sucks
+  eval std_shrext=\"$shrext_cmds\"
+
+
   # Only execute mode is allowed to have -dlopen flags.
   if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
+    func_error "unrecognized option \`-dlopen'"
+    $ECHO "$help" 1>&2
     exit $EXIT_FAILURE
   fi
 
   # Change the help message to a mode-specific one.
   generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
+  help="Try \`$progname --help --mode=$mode' for more information."
+}
+
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_ltwrapper_scriptname_result=""
+    if func_ltwrapper_executable_p "$1"; then
+	func_dirname_and_basename "$1" "" "."
+	func_stripname '' '.exe' "$func_basename_result"
+	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    fi
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
 
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+        func_quote_for_eval "$arg"
+	CC_quoted="$CC_quoted $func_quote_for_eval_result"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_quote_for_eval "$arg"
+	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	    done
+	    case "$@ " in
+	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
     # Get the compilation command and the source file.
     base_compile=
     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
@@ -664,6 +1109,7 @@ if test -z "$show_help"; then
     arg_mode=normal
     libobj=
     later=
+    pie_flag=
 
     for arg
     do
@@ -684,15 +1130,18 @@ if test -z "$show_help"; then
 	# Accept any command-line options.
 	case $arg in
 	-o)
-	  if test -n "$libobj" ; then
-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
 	  arg_mode=target
 	  continue
 	  ;;
 
-	-static | -prefer-pic | -prefer-non-pic)
+	-pie | -fpie | -fPIE)
+          pie_flag="$pie_flag $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
 	  later="$later $arg"
 	  continue
 	  ;;
@@ -708,31 +1157,25 @@ if test -z "$show_help"; then
 	  ;;            #  replaced later.  I would guess that would be a bug.
 
 	-Wc,*)
-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
 	  lastarg=
 	  save_ifs="$IFS"; IFS=','
- 	  for arg in $args; do
+	  for arg in $args; do
 	    IFS="$save_ifs"
-
-	    # Double-quote args containing other shell metacharacters.
-	    # Many Bourne shells cannot handle close brackets correctly
-	    # in scan sets, so we specify it separately.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    lastarg="$lastarg $arg"
+	    func_quote_for_eval "$arg"
+	    lastarg="$lastarg $func_quote_for_eval_result"
 	  done
 	  IFS="$save_ifs"
-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
 
 	  # Add the arguments to base_compile.
 	  base_compile="$base_compile $lastarg"
 	  continue
 	  ;;
 
-	* )
+	*)
 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
@@ -744,66 +1187,42 @@ if test -z "$show_help"; then
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      case $lastarg in
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
-      # in scan sets (worked around with variable expansion),
-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
-      # at all, so we specify them separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      base_compile="$base_compile $lastarg"
+      func_quote_for_eval "$lastarg"
+      base_compile="$base_compile $func_quote_for_eval_result"
     done # for arg
 
     case $arg_mode in
     arg)
-      $echo "$modename: you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
+      func_fatal_error "you must specify an argument for -Xcompile"
       ;;
     target)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_error "you must specify a target with \`-o'"
       ;;
     *)
       # Get the name of the library object.
-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
       ;;
     esac
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
     case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.[fF][09]?) xform=[fF][09]. ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    *.obj) xform=obj ;;
-    *.sx) xform=sx ;;
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
     esac
 
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
     case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
       ;;
     esac
 
@@ -811,7 +1230,15 @@ if test -z "$show_help"; then
 
     for arg in $later; do
       case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
       -static)
+	build_libtool_libs=no
 	build_old_libs=yes
 	continue
 	;;
@@ -828,28 +1255,17 @@ if test -z "$show_help"; then
       esac
     done
 
-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-    case $qlibobj in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qlibobj="\"$qlibobj\"" ;;
-    esac
-    test "X$libobj" != "X$qlibobj" \
-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
     lobj=${xdir}$objdir/$objname
 
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
 
     # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then
@@ -858,12 +1274,9 @@ if test -z "$show_help"; then
       removelist="$lobj $libobj ${libobj}T"
     fi
 
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
       pic_mode=default
       ;;
     esac
@@ -875,10 +1288,8 @@ if test -z "$show_help"; then
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
     else
       output_obj=
       need_locks=no
@@ -888,13 +1299,13 @@ if test -z "$show_help"; then
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
     elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`
 
@@ -905,34 +1316,22 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
-      $echo "$srcfile" > "$lockfile"
+      removelist="$removelist $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
     fi
 
+    $opt_dry_run || $RM $removelist
+    removelist="$removelist $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-    case $qsrcfile in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      qsrcfile="\"$qsrcfile\"" ;;
-    esac
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
 
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
@@ -946,32 +1345,19 @@ EOF
 	command="$base_compile $qsrcfile"
       fi
 
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	exit_status=$?
-	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $exit_status
-	fi
-      fi
+      func_mkdir_p "$xdir$objdir"
 
       if test -z "$output_obj"; then
 	# Place PIC objects in $objdir
 	command="$command -o $lobj"
       fi
 
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval $lt_env "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -985,45 +1371,27 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
       fi
 
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
       # Allow error messages only from the first compilation.
       if test "$suppress_opt" = yes; then
-        suppress_output=' >/dev/null 2>&1'
+	suppress_output=' >/dev/null 2>&1'
       fi
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
     fi
 
     # Only build a position-dependent object if we build old libraries.
     if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then
 	# Don't build PIC code
-	command="$base_compile $qsrcfile"
+	command="$base_compile $qsrcfile$pie_flag"
       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
@@ -1033,17 +1401,12 @@ EOF
 
       # Suppress compiler output if we already did a PIC compilation.
       command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval $lt_env "$command"; then :
-      else
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -1057,53 +1420,2620 @@ repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$mode'"
+        ;;
+    esac
+
+    $ECHO
+    $ECHO "Try \`$progname --help' for more information about other modes."
+
+    exit $?
+}
+
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
 	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
 	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
       fi
+    done
 
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
 
-EOF
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_quote_for_eval "$file"
+      args="$args $func_quote_for_eval_result"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
     else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	$ECHO "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
 
-EOF
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
     fi
 
-    $run $mv "${libobj}T" "${libobj}"
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    $ECHO "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $ECHO "   $libdir"
+    done
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $ECHO "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
 
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
+      $ECHO "   - use the \`$flag' linker flag"
     fi
+    if test -n "$admincmds"; then
+      $ECHO "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $ECHO
 
+    $ECHO "See any operating system documentation about shared libraries for"
+    case $host in
+      solaris2.[6789]|solaris2.1[0-9])
+        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	$ECHO "pages."
+	;;
+      *)
+        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+        ;;
+    esac
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
+}
+
+test "$mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    install_prog="$install_prog$func_quote_for_eval_result"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      install_prog="$install_prog $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_verbose "extracting global C symbols from \`$progfile'"
+	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+	  $opt_dry_run || {
+	    eval '$ECHO ": $name " >> "$nlist"'
+	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	  }
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+"
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* )
+	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs.  */"
+	    lt_dlsym_const= ;;
+	  *osf5*)
+	    echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+	    lt_dlsym_const= ;;
+	  *)
+	    lt_dlsym_const=const ;;
+	  esac
+
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) symtab_cflags="$symtab_cflags $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
     ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
 
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+	func_emit_wrapper_part1_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part1_arg1=$1
+	fi
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$ECHO "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
+	fi
+
+	$ECHO "\
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2* | *-cegcc*)
+	  $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_arg1=$1
+	fi
+
+	# split this up so that func_emit_cwrapperexe_src
+	# can call each part independently.
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
     case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
+
+const char *program_name = NULL;
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+
+static const char *script_text_part1 =
+EOF
+
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+
+static const char *script_text_part2 =
+EOF
+	    func_emit_wrapper_part2 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+
+	    cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_pathlist "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_pathlist "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
+
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+
+  /* very simple arg parsing; don't want to rely on getopt */
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
+	  return 0;
+	}
+    }
+
+  newargz = XMALLOC (char *, argc + 1);
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+			  tmp_pathspec));
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+			  actual_cwrapper_path));
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  for (i = 0; i < newargc; i++)
+    {
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal ("getcwd failed");
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+			      tmp_pathspec));
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  char *errstr = strerror (errno);
+	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
@@ -1121,10 +4051,10 @@ EOF
       allow_undefined=yes
       ;;
     esac
-    libtool_args="$nonopt"
+    libtool_args=$nonopt
     base_compile="$nonopt $@"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
+    compile_command=$nonopt
+    finalize_command=$nonopt
 
     compile_rpath=
     finalize_rpath=
@@ -1139,6 +4069,7 @@ EOF
     dllsearchpath=
     lib_search_path=`pwd`
     inst_prefix_dir=
+    new_inherited_linker_flags=
 
     avoid_version=no
     dlfiles=
@@ -1154,7 +4085,6 @@ EOF
     no_install=no
     objs=
     non_pic_objects=
-    notinst_path= # paths that contain not-installed libtool libraries
     precious_files_regex=
     prefer_static_libs=no
     preload=no
@@ -1168,19 +4098,25 @@ EOF
     thread_safe=no
     vinfo=
     vinfo_number=no
+    weak_libs=
     single_module="${wl}-single_module"
-
     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
     for arg
     do
       case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
       -all-static | -static | -static-libtool-libs)
 	case $arg in
 	-all-static)
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	    func_warning "complete static linking is impossible in this configuration"
 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
@@ -1214,20 +4150,16 @@ EOF
     while test "$#" -gt 0; do
       arg="$1"
       shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
 
       # If the previous option needs an argument, assign it.
       if test -n "$prev"; then
 	case $prev in
 	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
 	  ;;
 	esac
 
@@ -1235,8 +4167,8 @@ EOF
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
 	    preload=yes
 	  fi
 	  case $arg in
@@ -1274,10 +4206,8 @@ EOF
 	  ;;
 	expsyms)
 	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
 	  prev=
 	  continue
 	  ;;
@@ -1286,18 +4216,21 @@ EOF
 	  prev=
 	  continue
 	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
 	  prev=
 	  continue
 	  ;;
-	release)
-	  release="-$arg"
+	inst_prefix)
+	  inst_prefix_dir="$arg"
 	  prev=
 	  continue
 	  ;;
@@ -1305,39 +4238,30 @@ EOF
 	  if test -f "$arg"; then
 	    save_arg=$arg
 	    moreargs=
-	    for fil in `cat $save_arg`
+	    for fil in `cat "$save_arg"`
 	    do
 #	      moreargs="$moreargs $fil"
 	      arg=$fil
 	      # A libtool-controlled object.
 
 	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	      if func_lalib_unsafe_p "$arg"; then
 		pic_object=
 		non_pic_object=
 
 		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
+		func_source "$arg"
 
-		if test -z "$pic_object" || \
+		if test -z "$pic_object" ||
 		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
+		   test "$pic_object" = none &&
 		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
+		  func_fatal_error "cannot find name of object for \`$arg'"
 		fi
 
 		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
 
 		if test "$pic_object" != none; then
 		  # Prepend the subdirectory the object is found in.
@@ -1362,7 +4286,7 @@ EOF
 		  fi
 
 		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
+		  func_append libobjs " $pic_object"
 		  arg="$pic_object"
 		fi
 
@@ -1372,7 +4296,7 @@ EOF
 		  non_pic_object="$xdir$non_pic_object"
 
 		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_append non_pic_objects " $non_pic_object"
 		  if test -z "$pic_object" || test "$pic_object" = none ; then
 		    arg="$non_pic_object"
 		  fi
@@ -1380,46 +4304,48 @@ EOF
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
 		  non_pic_object="$pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_append non_pic_objects " $non_pic_object"
 		fi
 	      else
 		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
-		else
-		  # Dry-run case.
-
+		if $opt_dry_run; then
 		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
 		fi
 	      fi
 	    done
 	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
+	    func_fatal_error "link input file \`$arg' does not exist"
 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
 	rpath | xrpath)
 	  # We need an absolute path.
 	  case $arg in
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "only absolute run-paths are allowed"
 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
@@ -1436,39 +4362,37 @@ EOF
 	  prev=
 	  continue
 	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
+	shrext)
+	  shrext_cmds="$arg"
 	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
 	  continue
 	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
+	weak)
+	  weak_libs="$weak_libs $arg"
 	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
 	  continue
 	  ;;
 	xcclinker)
 	  linker_flags="$linker_flags $qarg"
 	  compiler_flags="$compiler_flags $qarg"
 	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
-	shrext)
-  	  shrext_cmds="$arg"
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
 	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
-	darwin_framework|darwin_framework_skip)
-	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
 	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
 	  continue
 	  ;;
 	*)
@@ -1484,16 +4408,16 @@ EOF
       case $arg in
       -all-static)
 	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
 	fi
 	continue
 	;;
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
 	;;
 
       -avoid-version)
@@ -1518,8 +4442,7 @@ EOF
 
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
@@ -1529,15 +4452,8 @@ EOF
 	continue
 	;;
 
-      -framework|-arch|-isysroot)
-	case " $CC " in
-	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
-		prev=darwin_framework_skip ;;
-	  *) compiler_flags="$compiler_flags $arg"
-	     prev=darwin_framework ;;
-	esac
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
+      -framework)
+	prev=framework
 	continue
 	;;
 
@@ -1551,25 +4467,30 @@ EOF
       -L[A-Z][A-Z]*:*)
 	case $with_gcc/$host in
 	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
 	  ;;
 	esac
 	continue
 	;;
 
       -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	func_stripname '-L' '' "$arg"
+	dir=$func_stripname_result
+	if test -z "$dir"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    absdir="$dir"
-	    notinst_path="$notinst_path $dir"
-	  fi
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
 	  dir="$absdir"
 	  ;;
 	esac
@@ -1581,14 +4502,16 @@ EOF
 	  ;;
 	esac
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -1599,7 +4522,7 @@ EOF
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -1613,7 +4536,7 @@ EOF
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
+	    deplibs="$deplibs System.ltframework"
 	    continue
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
@@ -1637,20 +4560,30 @@ EOF
 	continue
 	;;
 
+      -module)
+	module=yes
+	continue
+	;;
+
       # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.
-      -model)
-	compile_command="$compile_command $arg"
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot)
 	compiler_flags="$compiler_flags $arg"
-	finalize_command="$finalize_command $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
 	prev=xcompiler
 	continue
 	;;
 
-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
 	compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+	esac
 	continue
 	;;
 
@@ -1659,44 +4592,6 @@ EOF
 	continue
 	;;
 
-      -module)
-	module=yes
-	continue
-	;;
-
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m* pass through architecture-specific compiler args for GCC
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-      # -F/path gives path to uninstalled frameworks, gcc on darwin
-      # @file GCC response files
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
-
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-        compile_command="$compile_command $arg"
-        finalize_command="$finalize_command $arg"
-        compiler_flags="$compiler_flags $arg"
-        continue
-        ;;
-
-      -shrext)
-	prev=shrext
-	continue
-	;;
-
       -no-fast-install)
 	fast_install=no
 	continue
@@ -1704,11 +4599,11 @@ EOF
 
       -no-install)
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
 	  # and Darwin in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
@@ -1749,13 +4644,13 @@ EOF
 	;;
 
       -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "only absolute run-paths are allowed"
 	  ;;
 	esac
 	case "$xrpath " in
@@ -1765,6 +4660,16 @@ EOF
 	continue
 	;;
 
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
       -static | -static-libtool-libs)
 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
@@ -1783,47 +4688,49 @@ EOF
 	prev=vinfo
 	continue
 	;;
+
       -version-number)
 	prev=vinfo
 	vinfo_number=yes
 	continue
 	;;
 
+      -weak)
+        prev=weak
+	continue
+	;;
+
       -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
+          func_quote_for_eval "$flag"
+	  arg="$arg $wl$func_quote_for_eval_result"
+	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
 	;;
 
       -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
+          func_quote_for_eval "$flag"
+	  arg="$arg $wl$func_quote_for_eval_result"
+	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+	  linker_flags="$linker_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
 	;;
 
       -Xcompiler)
@@ -1841,16 +4748,36 @@ EOF
 	continue
 	;;
 
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
       # Some other compiler flag.
       -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
 	;;
 
       *.$objext)
@@ -1862,32 +4789,23 @@ EOF
 	# A libtool-controlled object.
 
 	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_unsafe_p "$arg"; then
 	  pic_object=
 	  non_pic_object=
 
 	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
+	  func_source "$arg"
 
-	  if test -z "$pic_object" || \
+	  if test -z "$pic_object" ||
 	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
+	     test "$pic_object" = none &&
 	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "cannot find name of object for \`$arg'"
 	  fi
 
 	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
 
 	  if test "$pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
@@ -1912,7 +4830,7 @@ EOF
 	    fi
 
 	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
+	    func_append libobjs " $pic_object"
 	    arg="$pic_object"
 	  fi
 
@@ -1922,7 +4840,7 @@ EOF
 	    non_pic_object="$xdir$non_pic_object"
 
 	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
@@ -1930,28 +4848,22 @@ EOF
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
 	    non_pic_object="$pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	  fi
 	else
 	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit $EXIT_FAILURE
-	  else
-	    # Dry-run case.
-
+	  if $opt_dry_run; then
 	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
 	  fi
 	fi
 	;;
@@ -1984,70 +4896,51 @@ EOF
       *)
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
 	;;
       esac # arg
 
       # Now actually substitute the argument into the commands.
       if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
       fi
     done # argument parsing loop
 
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
 
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
     fi
 
     oldlibs=
     # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    func_basename "$output"
+    outputname="$func_basename_result"
     libobjs_save="$libobjs"
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
     # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $exit_status
-      fi
-    fi
+    func_mkdir_p "$output_objdir"
 
     # Determine the type of output
     case $output in
     "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_help "you must specify an output file"
       ;;
     *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;
@@ -2055,22 +4948,13 @@ EOF
     *) linkmode=prog ;; # Anything else should be a program.
     esac
 
-    case $host in
-    *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplications in $postdeps and $predeps
-      duplicate_compiler_generated_deps=yes
-      ;;
-    *)
-      duplicate_compiler_generated_deps=$duplicate_deps
-      ;;
-    esac
     specialdeplibs=
 
     libs=
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
+      if $opt_duplicate_deps ; then
 	case "$libs " in
 	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	esac
@@ -2085,7 +4969,7 @@ EOF
       # $postdeps and mark them as special (i.e., whose duplicates are
       # not to be eliminated).
       pre_post_deps=
-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+      if $opt_duplicate_compiler_generated_deps; then
 	for pre_post_dep in $predeps $postdeps; do
 	  case "$pre_post_deps " in
 	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
@@ -2101,15 +4985,16 @@ EOF
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
     case $linkmode in
     lib)
-	passes="conv link"
+	passes="conv dlpreopen link"
 	for file in $dlfiles $dlprefiles; do
 	  case $file in
 	  *.la) ;;
 	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
 	    ;;
 	  esac
 	done
@@ -2125,7 +5010,20 @@ EOF
     *)  passes="conv"
 	;;
     esac
+
     for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
       if test "$linkmode,$pass" = "lib,link" ||
 	 test "$linkmode,$pass" = "prog,scan"; then
 	libs="$deplibs"
@@ -2138,11 +5036,33 @@ EOF
 	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  case $lib in
+	  *.la)	func_source "$lib" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) deplibs="$deplibs $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
       if test "$pass" = dlopen; then
 	# Collect dlpreopened libraries
 	save_deplibs="$deplibs"
 	deplibs=
       fi
+
       for deplib in $libs; do
 	lib=
 	found=no
@@ -2153,15 +5073,22 @@ EOF
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    compiler_flags="$compiler_flags $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
 	  fi
 	  continue
 	  ;;
 	-l*)
 	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    func_warning "\`-l' is ignored for archives/objects"
 	    continue
 	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
 	  if test "$linkmode" = lib; then
 	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 	  else
@@ -2197,21 +5124,17 @@ EOF
 	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)
-		if (${SED} -e '2q' $lib |
-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		if func_lalib_p "$lib"; then
 		  library_names=
 		  old_library=
-		  case $lib in
-		  */* | *\\*) . $lib ;;
-		  *) . ./$lib ;;
-		  esac
+		  func_source "$lib"
 		  for l in $old_library $library_names; do
 		    ll="$l"
 		  done
 		  if test "X$ll" = "X$old_library" ; then # only static version available
 		    found=no
-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-		    test "X$ladir" = "X$lib" && ladir="."
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
 		    lib=$ladir/$old_library
 		    if test "$linkmode,$pass" = "prog,link"; then
 		      compile_deplibs="$deplib $compile_deplibs"
@@ -2223,19 +5146,35 @@ EOF
 		    continue
 		  fi
 		fi
-	        ;;
+		;;
 	      *) ;;
 	      esac
 	    fi
 	  fi
 	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
 	-L*)
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
 	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
 	    ;;
 	  prog)
 	    if test "$pass" = conv; then
@@ -2248,17 +5187,19 @@ EOF
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
 	    ;;
 	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    func_warning "\`-L' is ignored for archives/objects"
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
 	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    func_stripname '-R' '' "$deplib"
+	    dir=$func_stripname_result
 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
 	    *" $dir "*) ;;
@@ -2276,35 +5217,41 @@ EOF
 	  fi
 	  case $linkmode in
 	  lib)
-	    valid_a_lib=no
-	    case $deplibs_check_method in
-	      match_pattern*)
-		set dummy $deplibs_check_method
-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-		if eval $echo \"$deplib\" 2>/dev/null \
-		    | $SED 10q \
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		  valid_a_lib=yes
-		fi
+		    valid_a_lib=yes
+		  fi
 		;;
-	      pass_all)
-		valid_a_lib=yes
+		pass_all)
+		  valid_a_lib=yes
 		;;
-            esac
-	    if test "$valid_a_lib" != yes; then
-	      $echo
-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
-	      $echo "*** I have the capability to make that library automatically link in when"
-	      $echo "*** you link to this library.  But I can only do this if you have a"
-	      $echo "*** shared version of the library, which you do not appear to have"
-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
-	      $echo "*** that it is just a static archive that I should not used here."
-	    else
-	      $echo
-	      $echo "*** Warning: Linking the shared library $output against the"
-	      $echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		$ECHO
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
+		$ECHO "*** that it is just a static archive that I should not use here."
+	      else
+		$ECHO
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
 	    continue
 	    ;;
 	  prog)
@@ -2339,21 +5286,18 @@ EOF
 	  continue
 	  ;;
 	esac # case $deplib
+
 	if test "$found" = yes || test -f "$lib"; then :
 	else
-	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
 	fi
 
 	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
 
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
 
 	dlname=
 	dlopen=
@@ -2361,6 +5305,7 @@ EOF
 	libdir=
 	library_names=
 	old_library=
+	inherited_linker_flags=
 	# If the library was installed with an old release of libtool,
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
@@ -2369,11 +5314,19 @@ EOF
 
 
 	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
@@ -2386,26 +5339,24 @@ EOF
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit $EXIT_FAILURE
+	      func_fatal_error "cannot find name of link library for \`$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_duplicate_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
 	  continue
 	fi # $pass = conv
 
@@ -2416,15 +5367,13 @@ EOF
 	  linklib="$l"
 	done
 	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot find name of link library for \`$lib'"
 	fi
 
 	# This library was specified with -dlopen.
 	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
 	  fi
 	  if test -z "$dlname" ||
 	     test "$dlopen_support" != yes ||
@@ -2446,18 +5395,19 @@ EOF
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
 	    abs_ladir="$ladir"
 	  fi
 	  ;;
 	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	func_basename "$lib"
+	laname="$func_basename_result"
 
 	# Find the relevant object directory and library name.
 	if test "X$installed" = Xyes; then
 	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    func_warning "library \`$lib' was moved."
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    libdir="$abs_ladir"
@@ -2479,18 +5429,22 @@ EOF
 	    notinst_path="$notinst_path $abs_ladir"
 	  fi
 	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
 
 	# This library was specified with -dlpreopen.
 	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
 	  fi
 	  # Prefer using a static library (so that no silly _DYNAMIC symbols
 	  # are required to link).
 	  if test -n "$old_library"; then
 	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	    # Keep a list of preopened convenience libraries to check
+	    # that they are being used correctly in the link pass.
+	    test -z "$libdir" && \
+		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
 	  # Otherwise, use the dlname, so that lt_dlopen finds it.
 	  elif test -n "$dlname"; then
 	    newdlprefiles="$newdlprefiles $dir/$dlname"
@@ -2526,7 +5480,9 @@ EOF
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    -L*) func_stripname '-L' '' "$deplib"
+	         newlib_search_path="$newlib_search_path $func_stripname_result"
+		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
 	    if test "$linkalldeplibs" = yes; then
@@ -2536,7 +5492,7 @@ EOF
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
+	    if $opt_duplicate_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
@@ -2549,15 +5505,14 @@ EOF
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
 	     { { test "$prefer_static_libs" = no ||
-		 test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
 	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $absdir" ;;
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) temp_rpath="$temp_rpath$absdir:" ;;
 	      esac
 	    fi
 
@@ -2595,27 +5550,43 @@ EOF
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	if test "$use_static_libs" = built && test "$installed" = yes; then
 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
 	  # This is a shared library
 
-	  # Warn about portability, can't link against -module's on
-	  # some systems (darwin)
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
-	    $echo
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    $ECHO
 	    if test "$linkmode" = prog; then
-	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
-	    $echo "*** $linklib is not portable!"
+	    $ECHO "*** $linklib is not portable!"
 	  fi
 	  if test "$linkmode" = lib &&
 	     test "$hardcode_into_libs" = yes; then
@@ -2645,17 +5616,19 @@ EOF
 	  if test -n "$old_archive_from_expsyms_cmds"; then
 	    # figure out the soname
 	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
 	      soname="$dlname"
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw*)
-		major=`expr $current - $age`
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
 		versuffix="-$major"
 		;;
 	      esac
@@ -2666,36 +5639,22 @@ EOF
 
 	    # Make a new name for the extract_expsyms_cmds to use
 	    soroot="$soname"
-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$extract_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$old_archive_from_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
 	    fi
 	    # make sure the library variables are pointing to the new library
 	    dir=$output_objdir
@@ -2717,17 +5676,21 @@ EOF
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
 		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
-		    # it, someone is ignoring the new warnings I added
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
 		    if /usr/bin/file -L $add 2> /dev/null |
-                      $EGREP ": [^:]* bundle" >/dev/null ; then
-		      $echo "** Warning, lib $linklib is a module, not a shared library"
-		      if test -z "$old_library" ; then
-		        $echo
-		        $echo "** And there doesn't seem to be a static archive available"
-		        $echo "** The link will probably fail, sorry"
-		      else
-		        add="$dir/$old_library"
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  $ECHO
+			  $ECHO "*** And there doesn't seem to be a static archive available"
+			  $ECHO "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
 		      fi
 		    fi
 		esac
@@ -2745,7 +5708,8 @@ EOF
 	      fi
 	      ;;
 	    relink)
-	      if test "$hardcode_direct" = yes; then
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
 		add_dir="-L$dir"
@@ -2769,8 +5733,7 @@ EOF
 	    esac
 
 	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit $EXIT_FAILURE
+	      func_fatal_configuration "unsupported hardcode properties"
 	    fi
 
 	    if test -n "$add_shlibpath"; then
@@ -2785,8 +5748,8 @@ EOF
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
 		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
@@ -2801,7 +5764,8 @@ EOF
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
 	      add="$libdir/$linklib"
 	    elif test "$hardcode_minus_L" = yes; then
 	      add_dir="-L$libdir"
@@ -2815,9 +5779,9 @@ EOF
 	    elif test "$hardcode_automatic" = yes; then
 	      if test -n "$inst_prefix_dir" &&
 		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-	        add="$inst_prefix_dir$libdir/$linklib"
+		add="$inst_prefix_dir$libdir/$linklib"
 	      else
-	        add="$libdir/$linklib"
+		add="$libdir/$linklib"
 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
@@ -2861,21 +5825,21 @@ EOF
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    $echo
-	    $echo "*** Warning: This system can not link to static lib archive $lib."
-	    $echo "*** I have the capability to make that library automatically link in when"
-	    $echo "*** you link to this library.  But I can only do this if you have a"
-	    $echo "*** shared version of the library, which you do not appear to have."
+	    $ECHO
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    $ECHO "*** I have the capability to make that library automatically link in when"
+	    $ECHO "*** you link to this library.  But I can only do this if you have a"
+	    $ECHO "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      $echo "*** But as you try to build a module library, libtool will still create "
-	      $echo "*** a static module, that should work as long as the dlopening application"
-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      $ECHO "*** But as you try to build a module library, libtool will still create "
+	      $ECHO "*** a static module, that should work as long as the dlopening application"
+	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		$echo
-		$echo "*** However, this would only work if libtool was able to extract symbol"
-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$echo "*** not find such a program.  So, this module is probably useless."
-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		$ECHO
+		$ECHO "*** However, this would only work if libtool was able to extract symbol"
+		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$ECHO "*** not find such a program.  So, this module is probably useless."
+		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -2899,7 +5863,8 @@ EOF
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
 	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
 		   case " $xrpath " in
 		   *" $temp_xrpath "*) ;;
 		   *) xrpath="$xrpath $temp_xrpath";;
@@ -2917,7 +5882,7 @@ EOF
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
+	    if $opt_duplicate_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
@@ -2931,94 +5896,71 @@ EOF
 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
+	        func_dirname "$deplib" "" "."
+		dir="$func_dirname_result"
 		# We need an absolute path.
 		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    func_warning "cannot determine absolute directory name of \`$dir'"
 		    absdir="$dir"
 		  fi
 		  ;;
 		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="$absdir"
-		fi
-		depdepl=
+		if $GREP "^installed=no" $deplib > /dev/null; then
 		case $host in
 		*-*-darwin*)
-		  # we do not want to link against static libs,
-		  # but need to link against shared
+		  depdepl=
 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$deplibdir/$depdepl" ; then
-		      depdepl="$deplibdir/$depdepl"
-	      	    elif test -f "$path/$depdepl" ; then
-		      depdepl="$path/$depdepl"
-		    else
-		      # Can't find it, oh well...
-		      depdepl=
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
 		    fi
-		    # do not add paths which are already there
-		    case " $newlib_search_path " in
-		    *" $path "*) ;;
-		    *) newlib_search_path="$newlib_search_path $path";;
-		    esac
 		  fi
-		  path=""
 		  ;;
 		*)
-		  path="-L$path"
-		  ;;
-		esac
-		;;
-	      -l*)
-		case $host in
-		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
+		  path="-L$absdir/$objdir"
 		  ;;
-		*) continue ;;
 		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
 		;;
-	      *) continue ;;
 	      esac
 	      case " $deplibs " in
 	      *" $path "*) ;;
 	      *) deplibs="$path $deplibs" ;;
 	      esac
-	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
 	    done
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
       dependency_libs="$newdependency_libs"
       if test "$pass" = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
@@ -3117,39 +6059,36 @@ EOF
     done # for pass
     if test "$linkmode" = prog; then
       dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
       dlprefiles="$newdlprefiles"
     fi
 
     case $linkmode in
     oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
+      fi
+
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
       esac
 
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
 
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
 
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
 
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
@@ -3161,48 +6100,48 @@ EOF
       # Make sure we only generate libraries of the form `libNAME.la'.
       case $outputname in
       lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
 	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
       *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
 	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
 	fi
 	;;
       esac
 
       if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit $EXIT_FAILURE
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
-	  $echo
-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  $echo "*** objects $objs is not portable!"
+	  $ECHO
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
 	  libobjs="$libobjs $objs"
 	fi
       fi
 
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
 
       set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
 
       oldlibs=
       if test -z "$rpath"; then
@@ -3216,25 +6155,21 @@ EOF
 	  build_old_libs=yes
 	fi
 
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
-	fi
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
 
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
       else
 
 	# Parse the version information argument.
 	save_ifs="$IFS"; IFS=':'
 	set dummy $vinfo 0 0 0
+	shift
 	IFS="$save_ifs"
 
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
@@ -3242,9 +6177,9 @@ EOF
 
 	case $vinfo_number in
 	yes)
-	  number_major="$2"
-	  number_minor="$3"
-	  number_revision="$4"
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
@@ -3254,7 +6189,8 @@ EOF
 	  #
 	  case $version_type in
 	  darwin|linux|osf|windows|none)
-	    current=`expr $number_major + $number_minor`
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
@@ -3264,7 +6200,8 @@ EOF
 	    age="0"
 	    ;;
 	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor`
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_minor"
 	    lt_irix_increment=no
@@ -3272,9 +6209,9 @@ EOF
 	  esac
 	  ;;
 	no)
-	  current="$2"
-	  revision="$3"
-	  age="$4"
+	  current="$1"
+	  revision="$2"
+	  age="$3"
 	  ;;
 	esac
 
@@ -3282,34 +6219,30 @@ EOF
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
 	fi
 
 	# Calculate the version variables.
@@ -3322,10 +6255,12 @@ EOF
 	darwin)
 	  # Like Linux, but with the current version available in
 	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
 	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
 	  ;;
@@ -3337,15 +6272,17 @@ EOF
 
 	freebsd-elf)
 	  major=".$current"
-	  versuffix=".$current";
+	  versuffix=".$current"
 	  ;;
 
 	irix | nonstopux)
 	  if test "X$lt_irix_increment" = "Xno"; then
-	    major=`expr $current - $age`
+	    func_arith $current - $age
 	  else
-	    major=`expr $current - $age + 1`
+	    func_arith $current - $age + 1
 	  fi
+	  major=$func_arith_result
+
 	  case $version_type in
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
@@ -3355,8 +6292,10 @@ EOF
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
 	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 
@@ -3366,20 +6305,24 @@ EOF
 	  ;;
 
 	linux)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  ;;
 
 	osf)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
 	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring:${iface}.0"
 	  done
 
@@ -3387,6 +6330,11 @@ EOF
 	  verstring="$verstring:${current}.0"
 	  ;;
 
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
 	sunos)
 	  major=".$current"
 	  versuffix=".$current.$revision"
@@ -3395,14 +6343,13 @@ EOF
 	windows)
 	  # Use '-' rather than '.', since we only want one
 	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
+	  func_arith $current - $age
+	  major=$func_arith_result
 	  versuffix="-$major"
 	  ;;
 
 	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
+	  func_fatal_configuration "unknown library version type \`$version_type'"
 	  ;;
 	esac
 
@@ -3436,7 +6383,7 @@ EOF
 	# Check to see if the archive will have undefined symbols.
 	if test "$allow_undefined" = yes; then
 	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    func_warning "undefined symbols not allowed in $host shared libraries"
 	    build_libtool_libs=no
 	    build_old_libs=yes
 	  fi
@@ -3444,21 +6391,26 @@ EOF
 	  # Don't allow undefined symbols.
 	  allow_undefined_flag="$no_undefined_flag"
 	fi
+
       fi
 
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      libobjs="$libobjs $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
       if test "$mode" != relink; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
-	tempremovelist=`$echo "$output_objdir/*"`
+	tempremovelist=`$ECHO "$output_objdir/*"`
 	for p in $tempremovelist; do
 	  case $p in
-	    *.$objext)
+	    *.$objext | *.gcno)
 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
 		   continue
 		 fi
 	       fi
@@ -3467,10 +6419,8 @@ EOF
 	    *) ;;
 	  esac
 	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
       fi
 
       # Now set the variables for building old libraries.
@@ -3478,14 +6428,14 @@ EOF
 	oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
       #for path in $notinst_path; do
-      #	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-      #	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-      #	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
       #done
 
       if test -n "$xrpath"; then
@@ -3526,12 +6476,12 @@ EOF
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
+	    deplibs="$deplibs System.ltframework"
 	    ;;
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
@@ -3545,7 +6495,7 @@ EOF
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
 	    ;;
- 	  *)
+	  *)
 	    # Add libc to deplibs on all other systems if necessary.
 	    if test "$build_libtool_need_lc" = "yes"; then
 	      deplibs="$deplibs -lc"
@@ -3582,17 +6532,18 @@ EOF
 	  # limits. Maybe even breaks it.  We compile a program, linking it
 	  # against the deplibs as a proxy for the library.  Then we can check
 	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
+	  $opt_dry_run || $RM conftest.c
 	  cat > conftest.c <<EOF
 	  int main() { return 0; }
 EOF
-	  $rm conftest
+	  $opt_dry_run || $RM conftest
 	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
@@ -3600,37 +6551,40 @@ EOF
 		    i=""
 		    ;;
 		  esac
-	        fi
+		fi
 		if test -n "$i" ; then
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		    newdeplibs="$newdeplibs $i"
 		  else
 		    droppeddeps=yes
-		    $echo
-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
-		    $echo "*** I have the capability to make that library automatically link in when"
-		    $echo "*** you link to this library.  But I can only do this if you have a"
-		    $echo "*** shared version of the library, which I believe you do not have"
-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		    $ECHO
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    $ECHO "*** I have the capability to make that library automatically link in when"
+		    $ECHO "*** you link to this library.  But I can only do this if you have a"
+		    $ECHO "*** shared version of the library, which I believe you do not have"
+		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  else
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
 		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3642,44 +6596,47 @@ EOF
 		    esac
 		  fi
 		  if test -n "$i" ; then
-		    libname=`eval \\$echo \"$libname_spec\"`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		    set dummy $deplib_matches
-		    deplib_match=$2
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		      newdeplibs="$newdeplibs $i"
 		    else
 		      droppeddeps=yes
-		      $echo
-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
-		      $echo "*** I have the capability to make that library automatically link in when"
-		      $echo "*** you link to this library.  But I can only do this if you have a"
-		      $echo "*** shared version of the library, which you do not appear to have"
-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      $ECHO
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      $ECHO "*** I have the capability to make that library automatically link in when"
+		      $ECHO "*** you link to this library.  But I can only do this if you have a"
+		      $ECHO "*** shared version of the library, which you do not appear to have"
+		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  $echo
-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "*** make it link in!  You will probably need to install it or some"
-		  $echo "*** library that it depends on before this library will be fully"
-		  $echo "*** functional.  Installing it before continuing would be even better."
+		  $ECHO
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $ECHO "*** make it link in!  You will probably need to install it or some"
+		  $ECHO "*** library that it depends on before this library will be fully"
+		  $ECHO "*** functional.  Installing it before continuing would be even better."
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  fi
 	  ;;
 	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-            if test "$name" != "" && test  "$name" != "0"; then
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
@@ -3689,13 +6646,13 @@ EOF
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
+		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
 			continue
 		      fi
 		      # The statement above tries to avoid entering an
@@ -3708,12 +6665,12 @@ EOF
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | $EGREP "$file_magic_regex" > /dev/null; then
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
 			newdeplibs="$newdeplibs $a_deplib"
 			a_deplib=""
 			break 2
@@ -3723,32 +6680,35 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
+		$ECHO
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a file magic. Last file checked: $potlib"
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
@@ -3758,14 +6718,13 @@ EOF
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
+		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval $echo \"$potent_lib\" 2>/dev/null \
-		        | ${SED} 10q \
-		        | $EGREP "$match_pattern_regex" > /dev/null; then
+		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      newdeplibs="$newdeplibs $a_deplib"
 		      a_deplib=""
 		      break 2
@@ -3775,44 +6734,46 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
+		$ECHO
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	    -e 's/ -[LR][^ ]*//g'`
+	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
 	    done
 	  fi
-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
-	    | grep . >/dev/null; then
-	    $echo
+	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
+	     $GREP . >/dev/null; then
+	    $ECHO
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    $echo "*** All declared inter-library dependencies are being dropped."
+	    $ECHO "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
 	  fi
 	  ;;
@@ -3825,24 +6786,24 @@ EOF
 
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    $echo
-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $echo "*** a static module, that should work as long as the dlopening"
-	    $echo "*** application is linked with the -dlopen flag."
+	    $ECHO
+	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $ECHO "*** a static module, that should work as long as the dlopening"
+	    $ECHO "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      $echo
-	      $echo "*** However, this would only work if libtool was able to extract symbol"
-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $echo "*** not find such a program.  So, this module is probably useless."
-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      $ECHO
+	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
+	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $ECHO "*** not find such a program.  So, this module is probably useless."
+	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -3852,16 +6813,16 @@ EOF
 	      build_libtool_libs=no
 	    fi
 	  else
-	    $echo "*** The inter-library dependencies that have been dropped here will be"
-	    $echo "*** automatically added whenever a program is linked with this library"
-	    $echo "*** or is declared to -dlopen it."
+	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
+	    $ECHO "*** automatically added whenever a program is linked with this library"
+	    $ECHO "*** or is declared to -dlopen it."
 
 	    if test "$allow_undefined" = no; then
-	      $echo
-	      $echo "*** Since this library must not contain undefined symbols,"
-	      $echo "*** because either the platform does not support them or"
-	      $echo "*** it was explicitly requested with -no-undefined,"
-	      $echo "*** libtool will only create a static version of it."
+	      $ECHO
+	      $ECHO "*** Since this library must not contain undefined symbols,"
+	      $ECHO "*** because either the platform does not support them or"
+	      $ECHO "*** it was explicitly requested with -no-undefined,"
+	      $ECHO "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -3875,7 +6836,14 @@ EOF
 	# Done checking deplibs!
 	deplibs=$newdeplibs
       fi
-
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
 
       # move library search paths that coincide with paths to not yet
       # installed libraries to the beginning of the library search list
@@ -3904,7 +6872,6 @@ EOF
       done
       deplibs="$new_libs"
 
-
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
@@ -3949,10 +6916,7 @@ EOF
 	     test -n "$hardcode_libdirs"; then
 	    libdir="$hardcode_libdirs"
 	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      case $archive_cmds in
-	      *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
-	      *)      eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
-	      esac
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
 	    else
 	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
 	    fi
@@ -3978,8 +6942,9 @@ EOF
 	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
-	realname="$2"
-	shift; shift
+	shift
+	realname="$1"
+	shift
 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
@@ -3998,71 +6963,122 @@ EOF
 	done
 
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  delfiles="$delfiles $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
 
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
 	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
+	    func_verbose "generating symbol list for \`$libname.la'"
 	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
+	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
 	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	        $show "$cmd"
-	        $run eval "$cmd" || exit $?
-	        skipped_export=false
+	      func_len " $cmd"
+	      len=$func_len_result
+	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
 	      else
-	        # The command line is too long to execute in one step.
-	        $show "using reloadable object file for export list..."
-	        skipped_export=:
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
 		# Break out early, otherwise skipped_export may be
 		# set to false by a later but shorter cmd.
 		break
 	      fi
 	    done
 	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
 	  fi
 	fi
 
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	fi
 
 	tmp_deplibs=
 	for test_deplib in $deplibs; do
-		case " $convenience " in
-		*" $test_deplib "*) ;;
-		*)
-			tmp_deplibs="$tmp_deplibs $test_deplib"
-			;;
-		esac
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    tmp_deplibs="$tmp_deplibs $test_deplib"
+	    ;;
+	  esac
 	done
 	deplibs="$tmp_deplibs"
 
 	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
 	  if test -n "$whole_archive_flag_spec"; then
 	    save_libobjs=$libobjs
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
 	  else
 	    gentop="$output_objdir/${outputname}x"
 	    generated="$generated $gentop"
 
 	    func_extract_archives $gentop $convenience
 	    libobjs="$libobjs $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	fi
-	
+
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
@@ -4070,7 +7086,7 @@ EOF
 
 	# Make a backup of the uninstalled library when relinking
 	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
 	# Do each of the archive commands.
@@ -4083,22 +7099,24 @@ EOF
 	    cmds=$module_cmds
 	  fi
 	else
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval test_cmds=\"$archive_expsym_cmds\"
-	  cmds=$archive_expsym_cmds
-	else
-	  eval test_cmds=\"$archive_cmds\"
-	  cmds=$archive_cmds
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
 	  fi
 	fi
 
 	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  :
 	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
 
 	  # Save the value of $output and $libobjs because we want to
 	  # use them later.  If we have whole_archive_flag_spec, we
@@ -4112,77 +7130,162 @@ EOF
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
 	  test_cmds=
 	  concat_cmds=
 	  objlist=
-	  delfiles=
 	  last_robj=
 	  k=1
-	  output=$output_objdir/$output_la-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    $ECHO 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      $ECHO "$obj" >> $output
+	    done
+	    $ECHO ')' >> $output
+	    delfiles="$delfiles $output"
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      $ECHO "$obj" >> $output
+	    done
+	    delfiles="$delfiles $output"
+	    output=$firstobj\"$file_list_spec$output\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=$obj
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      delfiles="$delfiles $output"
+
 	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
-	      last_robj=$output_objdir/$output_la-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$output_la-${k}.$objext
-	      objlist=$obj
-	      len=1
 	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
-	  if ${skipped_export-false}; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    libobjs=$output
-	    # Append the command to create the export file.
-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-          fi
-
-	  # Set up a command to remove the reloadable object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
-	  done
 
-	  $echo "creating a temporary reloadable object file: $output"
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
 
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
 	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
 
 	  libobjs=$output
 	  # Restore the value of output.
@@ -4190,6 +7293,7 @@ EOF
 
 	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	  # Expand the library linking commands again to reset the
 	  # value of $libobjs for piecewise linking.
@@ -4202,28 +7306,45 @@ EOF
 	      cmds=$module_cmds
 	    fi
 	  else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    cmds=$archive_expsym_cmds
-	  else
-	    cmds=$archive_cmds
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
 	    fi
 	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
 
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~\$rm $delfiles\"
+	  func_extract_archives $gentop $dlprefiles
+	  libobjs="$libobjs $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
 	fi
+
 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
 	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || {
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
 	    if test "$mode" = relink; then
-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
 	    fi
 
 	    exit $lt_exit
@@ -4233,12 +7354,11 @@ EOF
 
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
 	    if test -z "$whole_archive_flag_spec"; then
-	      $show "${rm}r $gentop"
-	      $run ${rm}r "$gentop"
+	      func_show_eval '${RM}r "$gentop"'
 	    fi
 	  fi
 
@@ -4248,8 +7368,7 @@ EOF
 	# Create links to the real library.
 	for linkname in $linknames; do
 	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
 	  fi
 	done
 
@@ -4262,39 +7381,35 @@ EOF
       ;;
 
     obj)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
+      fi
+
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
       esac
 
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
 
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
 
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
 
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
 
       case $output in
       *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
 	;;
       *)
 	libobj=
@@ -4303,7 +7418,7 @@ EOF
       esac
 
       # Delete the old objects.
-      $run $rm $obj $libobj
+      $opt_dry_run || $RM $obj $libobj
 
       # Objects from convenience libraries.  This assumes
       # single-version convenience libraries.  Whenever we create
@@ -4319,7 +7434,7 @@ EOF
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -4330,24 +7445,15 @@ EOF
       fi
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
-      cmds=$reload_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
+      func_execute_cmds "$reload_cmds" 'exit $?'
 
       # Exit if we aren't doing a library object file.
       if test -z "$libobj"; then
 	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
+	  func_show_eval '${RM}r "$gentop"'
 	fi
 
 	exit $EXIT_SUCCESS
@@ -4355,14 +7461,13 @@ EOF
 
       if test "$build_libtool_libs" != yes; then
 	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
+	  func_show_eval '${RM}r "$gentop"'
 	fi
 
 	# Create an invalid libtool object if no PIC, so that we don't
 	# accidentally link it into a program.
 	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 	exit $EXIT_SUCCESS
       fi
 
@@ -4370,20 +7475,11 @@ EOF
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
 	output="$libobj"
-	cmds=$reload_cmds
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
+	func_execute_cmds "$reload_cmds" 'exit $?'
       fi
 
       if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
+	func_show_eval '${RM}r "$gentop"'
       fi
 
       exit $EXIT_SUCCESS
@@ -4391,39 +7487,45 @@ EOF
 
     prog)
       case $host in
-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
       esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
 
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
 
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	;;
       esac
 
       case $host in
-      *darwin*)
-        # Don't allow lazy linking, it breaks C++ global constructors
-        if test "$tagname" = CXX ; then
-        compile_command="$compile_command ${wl}-bind_at_load"
-        finalize_command="$finalize_command ${wl}-bind_at_load"
-        fi
-        ;;
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      compile_command="$compile_command ${wl}-bind_at_load"
+	      finalize_command="$finalize_command ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
       esac
 
 
@@ -4498,14 +7600,16 @@ EOF
 	  esac
 	fi
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -4557,281 +7661,51 @@ EOF
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
+	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
       fi
 
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$outputname.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    else
-	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval '$echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
 
-	    case $host in
-	    *cygwin* | *mingw* )
-	  $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs */
-struct {
-"
-	      ;;
-	    * )
-	  $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-	      ;;
-	    esac
-
-
-	  $echo >> "$output_objdir/$dlsyms" "\
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-          case $host in
-          *cygwin* | *mingw* )
-            if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            else
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-             fi
-            ;;
-          * )
-            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            ;;
-          esac
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
       fi
 
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+      wrappers_required=yes
+      case $host in
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
 	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	exit_status=$?
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
 
 	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
 	fi
 
 	exit $exit_status
       fi
 
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
       if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
       fi
@@ -4864,12 +7738,11 @@ static const void *lt_preloaded_setup() {
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
-	$run $rm $output
+	$opt_dry_run || $RM $output
 	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
+	func_show_eval "$link_command" 'exit $?'
 	exit $EXIT_SUCCESS
       fi
 
@@ -4878,13 +7751,13 @@ static const void *lt_preloaded_setup() {
 	link_command="$compile_var$compile_command$compile_rpath"
 	relink_command="$finalize_var$finalize_command$finalize_rpath"
 
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
       else
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -4896,608 +7769,103 @@ static const void *lt_preloaded_setup() {
       fi
 
       # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
+      func_show_eval "$link_command" 'exit $?'
 
       # Now create the wrapper script.
-      $show "creating $output"
+      func_verbose "creating $output"
 
       # Quote the relink command for shipping.
       if test -n "$relink_command"; then
 	# Preserve any variables that may affect compiler behavior
 	for var in $variables_saved_for_relink; do
 	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 	  elif eval var_value=\$$var; test -z "$var_value"; then
 	    relink_command="$var=; export $var; $relink_command"
 	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       fi
 
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+      # Quote $ECHO for shipping.
+      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
 	case $progpath in
 	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
 	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
       else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
       fi
 
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
 	# win32 will think the script is a binary if it has
 	# a .exe suffix, so we strip it off here.
 	case $output in
-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
 	esac
 	# test for cygwin because mv fails w/o .exe extensions
 	case $host in
 	  *cygwin*)
 	    exeext=.exe
-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
 	  *) exeext= ;;
 	esac
 	case $host in
 	  *cygwin* | *mingw* )
-            output_name=`basename $output`
-            output_path=`dirname $output`
-            cwrappersource="$output_path/$objdir/lt-$output_name.c"
-            cwrapper="$output_path/$output_name.exe"
-            $rm $cwrappersource $cwrapper
-            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-	    cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS.  */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int    check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
-  DEBUG("(main) program_name : %s\n",program_name);
-  newargz = XMALLOC(char *, argc+2);
-EOF
-
-            cat >> $cwrappersource <<EOF
-  newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
-            cat >> $cwrappersource <<"EOF"
-  newargz[1] = find_executable(argv[0]);
-  if (newargz[1] == NULL)
-    lt_fatal("Couldn't find %s", argv[0]);
-  DEBUG("(main) found exe at : %s\n",newargz[1]);
-  /* we know the script has the same name, without the .exe */
-  /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
-  for (i = 1; i < argc; i++)
-    newargz[i+1] = xstrdup(argv[i]);
-  newargz[argc+1] = NULL;
-
-  for (i=0; i<argc+1; i++)
-  {
-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
-    ;
-  }
-
-EOF
-
-            case $host_os in
-              mingw*)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",(char const **)newargz);
-EOF
-              ;;
-              *)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",newargz);
-EOF
-              ;;
-            esac
-
-            cat >> $cwrappersource <<"EOF"
-  return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
-  void * p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable(const char * path)
-{
-  struct stat st;
-
-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0) &&
-      (
-        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
-       ((st.st_mode & S_IXUSR) == S_IXUSR))
-      )
-    return 1;
-  else
-    return 0;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
-  int has_slash = 0;
-  const char* p;
-  const char* p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char* concat_name;
-
-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-  {
-    concat_name = xstrdup (wrapper);
-    if (check_executable(concat_name))
-      return concat_name;
-    XFREE(concat_name);
-  }
-  else
-  {
-#endif
-    if (IS_DIR_SEPARATOR (wrapper[0]))
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable(concat_name))
-        return concat_name;
-      XFREE(concat_name);
-    }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-    {
-      has_slash = 1;
-      break;
-    }
-  if (!has_slash)
-  {
-    /* no slashes; search PATH */
-    const char* path = getenv ("PATH");
-    if (path != NULL)
-    {
-      for (p = path; *p; p = p_next)
-      {
-        const char* q;
-        size_t p_len;
-        for (q = p; *q; q++)
-          if (IS_PATH_SEPARATOR(*q))
-            break;
-        p_len = q - p;
-        p_next = (*q == '\0' ? q : q + 1);
-        if (p_len == 0)
-        {
-          /* empty path: current directory */
-          if (getcwd (tmp, LT_PATHMAX) == NULL)
-            lt_fatal ("getcwd failed");
-          tmp_len = strlen(tmp);
-          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, tmp, tmp_len);
-          concat_name[tmp_len] = '/';
-          strcpy (concat_name + tmp_len + 1, wrapper);
-        }
-        else
-        {
-          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, p, p_len);
-          concat_name[p_len] = '/';
-          strcpy (concat_name + p_len + 1, wrapper);
-        }
-        if (check_executable(concat_name))
-          return concat_name;
-        XFREE(concat_name);
-      }
-    }
-    /* not found in PATH; assume curdir */
-  }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen(tmp);
-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable(concat_name))
-    return concat_name;
-  XFREE(concat_name);
-  return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert(str != NULL);
-  assert(pat != NULL);
-
-  len = strlen(str);
-  patlen = strlen(pat);
-
-  if (patlen <= len)
-  {
-    str += len - patlen;
-    if (strcmp(str, pat) == 0)
-      *str = '\0';
-  }
-  return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
-          const char * message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-EOF
-          # we should really use a build-platform specific compiler
-          # here, but OTOH, the wrappers (shell script and this C one)
-          # are only useful if you want to execute the "real" binary.
-          # Since the "real" binary is built for $host, then this
-          # wrapper might as well be built for $host, too.
-          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-          ;;
-        esac
-        $rm $output
-        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  $echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  $echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
 
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
 	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
 
-	*)
-	  $echo >> $output "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
+	    func_emit_wrapper no > $output
+	    chmod +x $output
 	  ;;
 	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \$*\"
-      exit $EXIT_FAILURE
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi\
-"
-	chmod +x $output
-      fi
+      }
       exit $EXIT_SUCCESS
       ;;
     esac
@@ -5506,7 +7874,7 @@ fi\
     for oldlib in $oldlibs; do
 
       if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
+	oldobjs="$libobjs_save $symfileobj"
 	addlibs="$convenience"
 	build_libtool_libs=no
       else
@@ -5515,6 +7883,9 @@ fi\
 	  build_libtool_libs=no
 	else
 	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    oldobjs="$oldobjs $symfileobj"
+	  fi
 	fi
 	addlibs="$old_convenience"
       fi
@@ -5529,8 +7900,18 @@ fi\
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-       cmds=$old_archive_from_new_cmds
+	cmds=$old_archive_from_new_cmds
       else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  oldobjs="$oldobjs $func_extract_archives_result"
+	fi
+
 	# POSIX demands no paths to be encoded in archives.  We have
 	# to avoid creating archives with duplicate basenames if we
 	# might have to extract them afterwards, e.g., when creating a
@@ -5539,32 +7920,22 @@ fi\
 	# not supported by libtool).
 	if (for obj in $oldobjs
 	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  $echo "copying selected object files to avoid basename conflicts..."
-
-	  if test -z "$gentop"; then
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    exit_status=$?
-	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-	      exit $exit_status
-	    fi
-	  fi
-
+	  $ECHO "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
 	  oldobjs=
 	  counter=1
 	  for obj in $save_oldobjs
 	  do
-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *[\ /]"$objbase "*)
@@ -5572,58 +7943,62 @@ fi\
 		# Make sure we don't pick an alternate name that also
 		# overlaps.
 		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
+		func_arith $counter + 1
+		counter=$func_arith_result
 		case " $oldobjs " in
 		*[\ /]"$newobj "*) ;;
 		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
 		esac
 	      done
-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      $run ln "$obj" "$gentop/$newobj" ||
-	      $run cp "$obj" "$gentop/$newobj"
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
 	      oldobjs="$oldobjs $gentop/$newobj"
 	      ;;
 	    *) oldobjs="$oldobjs $obj" ;;
 	    esac
 	  done
 	fi
-
 	eval cmds=\"$old_archive_cmds\"
 
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
+	  func_verbose "using piecewise archive linking..."
 	  save_RANLIB=$RANLIB
 	  RANLIB=:
 	  objlist=
 	  concat_cmds=
 	  save_oldobjs=$oldobjs
-
+	  oldobjs=
 	  # Is there a better way of finding the last object in the list?
 	  for obj in $save_oldobjs
 	  do
 	    last_oldobj=$obj
 	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
 	  for obj in $save_oldobjs
 	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	       test "$len" -le "$max_cmd_len"; then
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
 	      :
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
 	      if test "$obj" = "$last_oldobj" ; then
-	        RANLIB=$save_RANLIB
+		RANLIB=$save_RANLIB
 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=
+	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
@@ -5635,49 +8010,39 @@ fi\
 	  fi
 	fi
       fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-        eval cmd=\"$cmd\"
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
+      func_execute_cmds "$cmds" 'exit $?'
     done
 
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
 
     # Now create the libtool archive.
     case $output in
     *.la)
       old_library=
       test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
+      func_verbose "creating $output"
 
       # Preserve any variables that may affect compiler behavior
       for var in $variables_saved_for_relink; do
 	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 	elif eval var_value=\$$var; test -z "$var_value"; then
 	  relink_command="$var=; export $var; $relink_command"
 	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	fi
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
 
-
       # Only create the output if not a dry run.
-      if test -z "$run"; then
+      $opt_dry_run || {
 	for installed in no yes; do
 	  if test "$installed" = yes; then
 	    if test -z "$install_libdir"; then
@@ -5689,12 +8054,11 @@ fi\
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		func_basename "$deplib"
+		name="$func_basename_result"
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit $EXIT_FAILURE
-		fi
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
 		newdependency_libs="$newdependency_libs $libdir/$name"
 		;;
 	      *) newdependency_libs="$newdependency_libs $deplib" ;;
@@ -5702,25 +8066,37 @@ fi\
 	    done
 	    dependency_libs="$newdependency_libs"
 	    newdlfiles=
+
 	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlfiles="$newdlfiles $libdir/$name"
+		;;
+	      *) newdlfiles="$newdlfiles $lib" ;;
+	      esac
 	    done
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlprefiles="$newdlprefiles $libdir/$name"
+		;;
+	      esac
 	    done
 	    dlprefiles="$newdlprefiles"
 	  else
@@ -5743,15 +8119,15 @@ fi\
 	    done
 	    dlprefiles="$newdlprefiles"
 	  fi
-	  $rm $output
+	  $RM $output
 	  # place dlname in correct position for cygwin
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
-	  $echo > $output "\
+	  $ECHO > $output "\
 # $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -5765,9 +8141,15 @@ library_names='$library_names'
 # The name of the static archive.
 old_library='$old_library'
 
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
 # Libraries that this one depends upon.
 dependency_libs='$dependency_libs'
 
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
 # Version information for $libname.
 current=$current
 age=$age
@@ -5786,748 +8168,29 @@ dlpreopen='$dlprefiles'
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
 	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $echo >> $output "\
+	    $ECHO >> $output "\
 relink_command=\"$relink_command\""
 	  fi
 	done
-      fi
+      }
 
       # Do a symbolic link so that the libtool archive can be found in
       # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
       ;;
     esac
     exit $EXIT_SUCCESS
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) 
-      	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
-      -g | -m | -o) prev=$arg ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  if test "$inst_prefix_dir" = "$destdir"; then
-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
-	  else
-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
-	  fi
-
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  cmds=$postinstall_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || {
-	      lt_exit=$?
-
-	      # Restore the uninstalled library and exit
-	      if test "$mode" = relink; then
-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	      fi
-
-	      exit $lt_exit
-	    }
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      file=`$echo $file|${SED} 's,.exe$,,'`
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir=`func_mktempdir`
-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway 
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      cmds=$old_postinstall_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  cmds=$finish_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = : && exit $EXIT_SUCCESS
-
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    $echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $echo "   $libdir"
-    done
-    $echo
-    $echo "If you ever happen to want to link against installed libraries"
-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $echo
-    $echo "See any operating system documentation about shared libraries for"
-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit $EXIT_FAILURE
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  if test ! -f "$dir/$dlname"; then
-	    $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
+}
 
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
+{ test "$mode" = link || test "$mode" = relink; } &&
+    func_mode_link ${1+"$@"}
 
-      # Restore saved environment variables
-      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-      do
-	eval "if test \"\${save_$lt_var+set}\" = set; then
-		$lt_var=\$save_$lt_var; export $lt_var
-	      fi"
-      done
 
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
     files=
     rmforce=
     exit_status=0
@@ -6539,30 +8202,28 @@ relink_command=\"$relink_command\""
     for arg
     do
       case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
+      -f) RM="$RM $arg"; rmforce=yes ;;
+      -*) RM="$RM $arg" ;;
       *) files="$files $arg" ;;
       esac
     done
 
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
 
     rmdirs=
 
     origobjdir="$objdir"
     for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
 	objdir="$origobjdir"
       else
 	objdir="$dir/$origobjdir"
       fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      func_basename "$file"
+      name="$func_basename_result"
       test "$mode" = uninstall && objdir="$dir"
 
       # Remember objdir for removal later, being careful to avoid duplicates
@@ -6574,9 +8235,9 @@ relink_command=\"$relink_command\""
       fi
 
       # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
 	:
       elif test -d "$file"; then
 	exit_status=1
@@ -6590,8 +8251,8 @@ relink_command=\"$relink_command\""
       case $name in
       *.la)
 	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
 
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
@@ -6606,39 +8267,17 @@ relink_command=\"$relink_command\""
 	    *" $dlname "*) ;;
 	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
 	    esac
-	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 	    ;;
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      cmds=$postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      cmds=$old_postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
@@ -6648,20 +8287,20 @@ relink_command=\"$relink_command\""
 
       *.lo)
 	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_p "$file"; then
 
 	  # Read the .lo file
-	  . $dir/$name
+	  func_source $dir/$name
 
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$non_pic_object"
 	  fi
 	fi
@@ -6672,17 +8311,26 @@ relink_command=\"$relink_command\""
 	  noexename=$name
 	  case $file in
 	  *.exe)
-	    file=`$echo $file|${SED} 's,.exe$,,'`
-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
 	    # $file with .exe has already been added to rmfiles,
 	    # add $file without .exe
 	    rmfiles="$rmfiles $file"
 	    ;;
 	  esac
 	  # Do a test to see if this is a libtool program.
-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	    relink_command=
-	    . $dir/$noexename
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
@@ -6697,239 +8345,38 @@ relink_command=\"$relink_command\""
 	fi
 	;;
       esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
     objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
       fi
     done
 
     exit $exit_status
-    ;;
+}
 
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-  esac
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
 
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi # test -z "$show_help"
+test -z "$mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$mode'"
 
 if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
+  eval exec "$exec_cmd"
   exit $EXIT_FAILURE
 fi
 
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
-  exit $EXIT_SUCCESS
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
+exit $exit_status
 
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-  ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
@@ -6943,14 +8390,17 @@ exit $?
 # configuration.  But we'll never go from static-only to shared-only.
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
+build_libtool_libs=no
+build_old_libs=yes
 # ### END LIBTOOL TAG CONFIG: disable-shared
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 # ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
 # mode:shell-script
 # sh-indentation:2
 # End:
+# vi:sw=2
+
diff --git a/pixman/pixman/Makefile.in b/pixman/pixman/Makefile.in
index a3518b057..1ca63f731 100644
--- a/pixman/pixman/Makefile.in
+++ b/pixman/pixman/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -193,24 +193,19 @@ CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DEP_CFLAGS = @DEP_CFLAGS@
 DEP_LIBS = @DEP_LIBS@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GREP = @GREP@
 GTK_CFLAGS = @GTK_CFLAGS@
 GTK_LIBS = @GTK_LIBS@
@@ -219,10 +214,12 @@ INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_VERSION_INFO = @LT_VERSION_INFO@
@@ -230,8 +227,12 @@ MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 MMX_CFLAGS = @MMX_CFLAGS@
 MMX_LDFLAGS = @MMX_LDFLAGS@
+NM = @NM@
 NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -259,8 +260,7 @@ abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -291,6 +291,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -389,8 +390,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
@@ -753,7 +754,7 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
diff --git a/pixman/pixman/pixman-access.c b/pixman/pixman/pixman-access.c
index a5e1c0fa1..532aa2ef7 100644
--- a/pixman/pixman/pixman-access.c
+++ b/pixman/pixman/pixman-access.c
@@ -63,14 +63,14 @@
     uint32_t *bits = __bits_image->bits;                                \
     int stride = __bits_image->rowstride;                               \
     int offset0 = stride < 0 ?                                          \
-	((-stride) >> 1) * ((__bits_image->height - 1) >> 1) - stride : \
-	stride * __bits_image->height;                                  \
+    ((-stride) >> 1) * ((__bits_image->height - 1) >> 1) - stride :	\
+    stride * __bits_image->height;					\
     int offset1 = stride < 0 ?                                          \
-	offset0 + ((-stride) >> 1) * ((__bits_image->height) >> 1) :    \
+    offset0 + ((-stride) >> 1) * ((__bits_image->height) >> 1) :	\
 	offset0 + (offset0 >> 2)
 
 /* Note no trailing semicolon on the above macro; if it's there, then
- * the typical usage of YV12_SETUP(pict); will have an extra trailing ;
+ * the typical usage of YV12_SETUP(image); will have an extra trailing ;
  * that some compilers will interpret as a statement -- and then any further
  * variable declarations will cause an error.
  */
@@ -364,7 +364,7 @@ fetch_scanline_r8g8b8 (pixman_image_t *image,
     while (pixel < end)
     {
 	uint32_t b = 0xff000000;
-
+	
 #ifdef WORDS_BIGENDIAN
 	b |= (READ (image, pixel++) << 16);
 	b |= (READ (image, pixel++) << 8);
@@ -374,7 +374,7 @@ fetch_scanline_r8g8b8 (pixman_image_t *image,
 	b |= (READ (image, pixel++) << 8);
 	b |= (READ (image, pixel++) << 16);
 #endif
-
+	
 	*buffer++ = b;
     }
 }
@@ -430,7 +430,7 @@ fetch_scanline_r5g6b5 (pixman_image_t *image,
 	
 	r |= (r >> 5) & 0x70007;
 	r |= (r >> 6) & 0x300;
-
+	
 	*buffer++ = 0xff000000 | r;
     }
 }
@@ -456,7 +456,7 @@ fetch_scanline_b5g6r5 (pixman_image_t *image,
 	b = ((p & 0xf800) | ((p & 0xe000) >> 5)) >> 8;
 	g = ((p & 0x07e0) | ((p & 0x0600) >> 6)) << 5;
 	r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14;
-
+	
 	*buffer++ = 0xff000000 | r | g | b;
     }
 }
@@ -483,7 +483,7 @@ fetch_scanline_a1r5g5b5 (pixman_image_t *image,
 	r = ((p & 0x7c00) | ((p & 0x7000) >> 5)) << 9;
 	g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6;
 	b = ((p & 0x001c) | ((p & 0x001f) << 5)) >> 2;
-
+	
 	*buffer++ = a | r | g | b;
     }
 }
@@ -509,7 +509,7 @@ fetch_scanline_x1r5g5b5 (pixman_image_t *image,
 	r = ((p & 0x7c00) | ((p & 0x7000) >> 5)) << 9;
 	g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6;
 	b = ((p & 0x001c) | ((p & 0x001f) << 5)) >> 2;
-
+	
 	*buffer++ = 0xff000000 | r | g | b;
     }
 }
@@ -536,7 +536,7 @@ fetch_scanline_a1b5g5r5 (pixman_image_t *image,
 	b = ((p & 0x7c00) | ((p & 0x7000) >> 5)) >> 7;
 	g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6;
 	r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14;
-
+	
 	*buffer++ = a | r | g | b;
     }
 }
@@ -562,7 +562,7 @@ fetch_scanline_x1b5g5r5 (pixman_image_t *image,
 	b = ((p & 0x7c00) | ((p & 0x7000) >> 5)) >> 7;
 	g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6;
 	r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14;
-
+	
 	*buffer++ = 0xff000000 | r | g | b;
     }
 }
@@ -589,7 +589,7 @@ fetch_scanline_a4r4g4b4 (pixman_image_t *image,
 	r = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) << 12;
 	g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8;
 	b = ((p & 0x000f) | ((p & 0x000f) << 4));
-
+	
 	*buffer++ = a | r | g | b;
     }
 }
@@ -615,7 +615,7 @@ fetch_scanline_x4r4g4b4 (pixman_image_t *image,
 	r = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) << 12;
 	g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8;
 	b = ((p & 0x000f) | ((p & 0x000f) << 4));
-
+	
 	*buffer++ = 0xff000000 | r | g | b;
     }
 }
@@ -642,7 +642,7 @@ fetch_scanline_a4b4g4r4 (pixman_image_t *image,
 	b = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) >> 4;
 	g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8;
 	r = ((p & 0x000f) | ((p & 0x000f) << 4)) << 16;
-
+	
 	*buffer++ = a | r | g | b;
     }
 }
@@ -668,7 +668,7 @@ fetch_scanline_x4b4g4r4 (pixman_image_t *image,
 	b = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) >> 4;
 	g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8;
 	r = ((p & 0x000f) | ((p & 0x000f) << 4)) << 16;
-
+	
 	*buffer++ = 0xff000000 | r | g | b;
     }
 }
@@ -714,7 +714,7 @@ fetch_scanline_r3g3b2 (pixman_image_t *image,
 	     ((p & 0x03) << 2) |
 	     ((p & 0x03) << 4) |
 	     ((p & 0x03) << 6));
-
+	
 	*buffer++ = 0xff000000 | r | g | b;
     }
 }
@@ -741,13 +741,13 @@ fetch_scanline_b2g3r3 (pixman_image_t *image,
 	     ((p & 0xc0) >> 2) |
 	     ((p & 0xc0) >> 4) |
 	     ((p & 0xc0) >> 6));
-
+	
 	g = ((p & 0x38) | ((p & 0x38) >> 3) | ((p & 0x30) << 2)) << 8;
-
+	
 	r = (((p & 0x07)     ) |
 	     ((p & 0x07) << 3) |
 	     ((p & 0x06) << 6)) << 16;
-
+	
 	*buffer++ = 0xff000000 | r | g | b;
     }
 }
@@ -774,7 +774,7 @@ fetch_scanline_a2r2g2b2 (pixman_image_t *image,
 	r = ((p & 0x30) * 0x55) << 12;
 	g = ((p & 0x0c) * 0x55) << 6;
 	b = ((p & 0x03) * 0x55);
-
+	
 	*buffer++ = a | r | g | b;
     }
 }
@@ -801,7 +801,7 @@ fetch_scanline_a2b2g2r2 (pixman_image_t *image,
 	b = ((p & 0x30) * 0x55) >> 6;
 	g = ((p & 0x0c) * 0x55) << 6;
 	r = ((p & 0x03) * 0x55) << 16;
-
+	
 	*buffer++ = a | r | g | b;
     }
 }
@@ -823,7 +823,7 @@ fetch_scanline_c8 (pixman_image_t *image,
     while (pixel < end)
     {
 	uint32_t p = READ (image, pixel++);
-
+	
 	*buffer++ = indexed->rgba[p];
     }
 }
@@ -844,7 +844,7 @@ fetch_scanline_x4a4 (pixman_image_t *image,
     while (pixel < end)
     {
 	uint8_t p = READ (image, pixel++) & 0xf;
-
+	
 	*buffer++ = (p | (p << 4)) << 24;
     }
 }
@@ -873,7 +873,7 @@ fetch_scanline_a4 (pixman_image_t *image,
 	uint32_t p = FETCH_4 (image, bits, i + x);
 	
 	p |= p << 4;
-
+	
 	*buffer++ = p << 24;
     }
 }
@@ -1137,1264 +1137,676 @@ fetch_scanline_yv12 (pixman_image_t *image,
 /**************************** Pixel wise fetching *****************************/
 
 /* Despite the type, expects a uint64_t buffer */
-static void
-fetch_pixels_a2r10g10b10_64 (bits_image_t *pict,
-                             uint32_t *    b,
-                             int           n_pixels)
+static uint64_t
+fetch_pixel_a2r10g10b10 (bits_image_t *image,
+			 int		  offset,
+			 int           line)
 {
-    int i;
-    uint64_t *buffer = (uint64_t *)b;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t p = READ (image, bits + offset);
+    uint64_t a = p >> 30;
+    uint64_t r = (p >> 20) & 0x3ff;
+    uint64_t g = (p >> 10) & 0x3ff;
+    uint64_t b = p & 0x3ff;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = ((uint32_t *)buffer)[2 * i];
-	int line = ((uint32_t *)buffer)[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t p = READ (pict, bits + offset);
-	    uint64_t a = p >> 30;
-	    uint64_t r = (p >> 20) & 0x3ff;
-	    uint64_t g = (p >> 10) & 0x3ff;
-	    uint64_t b = p & 0x3ff;
-	    
-	    r = r << 6 | r >> 4;
-	    g = g << 6 | g >> 4;
-	    b = b << 6 | b >> 4;
-	    
-	    a <<= 62;
-	    a |= a >> 2;
-	    a |= a >> 4;
-	    a |= a >> 8;
-	    
-	    buffer[i] = a << 48 | r << 32 | g << 16 | b;
-	}
-    }
+    r = r << 6 | r >> 4;
+    g = g << 6 | g >> 4;
+    b = b << 6 | b >> 4;
+    
+    a <<= 62;
+    a |= a >> 2;
+    a |= a >> 4;
+    a |= a >> 8;
+    
+    return a << 48 | r << 32 | g << 16 | b;
 }
 
 /* Despite the type, this function expects a uint64_t buffer */
-static void
-fetch_pixels_x2r10g10b10_64 (bits_image_t *pict,
-                             uint32_t *    b,
-                             int           n_pixels)
+static uint64_t
+fetch_pixel_x2r10g10b10 (bits_image_t *image,
+			 int	   offset,
+			 int           line)
 {
-    uint64_t *buffer = (uint64_t *)b;
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t p = READ (image, bits + offset);
+    uint64_t r = (p >> 20) & 0x3ff;
+    uint64_t g = (p >> 10) & 0x3ff;
+    uint64_t b = p & 0x3ff;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = ((uint32_t *)buffer)[2 * i];
-	int line = ((uint32_t *)buffer)[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t p = READ (pict, bits + offset);
-	    uint64_t r = (p >> 20) & 0x3ff;
-	    uint64_t g = (p >> 10) & 0x3ff;
-	    uint64_t b = p & 0x3ff;
-	    
-	    r = r << 6 | r >> 4;
-	    g = g << 6 | g >> 4;
-	    b = b << 6 | b >> 4;
-	    
-	    buffer[i] = 0xffffULL << 48 | r << 32 | g << 16 | b;
-	}
-    }
+    r = r << 6 | r >> 4;
+    g = g << 6 | g >> 4;
+    b = b << 6 | b >> 4;
+    
+    return 0xffffULL << 48 | r << 32 | g << 16 | b;
 }
 
 /* Despite the type, expects a uint64_t buffer */
-static void
-fetch_pixels_a2b10g10r10_64 (bits_image_t *pict,
-                             uint32_t *    b,
-                             int           n_pixels)
+static uint64_t
+fetch_pixel_a2b10g10r10 (bits_image_t *image,
+			 int           offset,
+			 int           line)
 {
-    uint64_t *buffer = (uint64_t *)b;
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t p = READ (image, bits + offset);
+    uint64_t a = p >> 30;
+    uint64_t b = (p >> 20) & 0x3ff;
+    uint64_t g = (p >> 10) & 0x3ff;
+    uint64_t r = p & 0x3ff;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = ((uint32_t *)buffer)[2 * i];
-	int line = ((uint32_t *)buffer)[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t p = READ (pict, bits + offset);
-	    uint64_t a = p >> 30;
-	    uint64_t b = (p >> 20) & 0x3ff;
-	    uint64_t g = (p >> 10) & 0x3ff;
-	    uint64_t r = p & 0x3ff;
-	    
-	    r = r << 6 | r >> 4;
-	    g = g << 6 | g >> 4;
-	    b = b << 6 | b >> 4;
-	    
-	    a <<= 62;
-	    a |= a >> 2;
-	    a |= a >> 4;
-	    a |= a >> 8;
-	    
-	    buffer[i] = a << 48 | r << 32 | g << 16 | b;
-	}
-    }
+    r = r << 6 | r >> 4;
+    g = g << 6 | g >> 4;
+    b = b << 6 | b >> 4;
+    
+    a <<= 62;
+    a |= a >> 2;
+    a |= a >> 4;
+    a |= a >> 8;
+    
+    return a << 48 | r << 32 | g << 16 | b;
 }
 
 /* Despite the type, this function expects a uint64_t buffer */
-static void
-fetch_pixels_x2b10g10r10_64 (bits_image_t *pict,
-                             uint32_t *    b,
-                             int           n_pixels)
+static uint64_t
+fetch_pixel_x2b10g10r10 (bits_image_t *image,
+			 int           offset,
+			 int           line)
 {
-    uint64_t *buffer = (uint64_t *)b;
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t p = READ (image, bits + offset);
+    uint64_t b = (p >> 20) & 0x3ff;
+    uint64_t g = (p >> 10) & 0x3ff;
+    uint64_t r = p & 0x3ff;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = ((uint32_t *)buffer)[2 * i];
-	int line = ((uint32_t *)buffer)[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t p = READ (pict, bits + offset);
-	    uint64_t b = (p >> 20) & 0x3ff;
-	    uint64_t g = (p >> 10) & 0x3ff;
-	    uint64_t r = p & 0x3ff;
-	    
-	    r = r << 6 | r >> 4;
-	    g = g << 6 | g >> 4;
-	    b = b << 6 | b >> 4;
-	    
-	    buffer[i] = 0xffffULL << 48 | r << 32 | g << 16 | b;
-	}
-    }
+    r = r << 6 | r >> 4;
+    g = g << 6 | g >> 4;
+    b = b << 6 | b >> 4;
+    
+    return 0xffffULL << 48 | r << 32 | g << 16 | b;
 }
 
-static void
-fetch_pixels_a8r8g8b8 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a8r8g8b8 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
-    
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    buffer[i] = READ (pict, (uint32_t *)bits + offset);
-	}
-    }
+    uint32_t *bits = image->bits + line * image->rowstride;
+    return READ (image, (uint32_t *)bits + offset);
 }
 
-static void
-fetch_pixels_x8r8g8b8 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_x8r8g8b8 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
-    
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    buffer[i] = READ (pict, (uint32_t *)bits + offset) | 0xff000000;
-	}
-    }
+    uint32_t *bits = image->bits + line * image->rowstride;
+
+    return READ (image, (uint32_t *)bits + offset) | 0xff000000;
 }
 
-static void
-fetch_pixels_a8b8g8r8 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a8b8g8r8 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint32_t *)bits + offset);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint32_t *)bits + offset);
-	    
-	    buffer[i] = ((pixel & 0xff000000) |
-	                 ((pixel >> 16) & 0xff) |
-	                 (pixel & 0x0000ff00) |
-	                 ((pixel & 0xff) << 16));
-	}
-    }
+    return ((pixel & 0xff000000) |
+	    ((pixel >> 16) & 0xff) |
+	    (pixel & 0x0000ff00) |
+	    ((pixel & 0xff) << 16));
 }
 
-static void
-fetch_pixels_x8b8g8r8 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_x8b8g8r8 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint32_t *)bits + offset);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint32_t *)bits + offset);
-	    
-	    buffer[i] = (0xff000000) |
-		((pixel >> 16) & 0xff) |
-		(pixel & 0x0000ff00) |
-		((pixel & 0xff) << 16);
-	}
-    }
+    return ((0xff000000) |
+	    ((pixel >> 16) & 0xff) |
+	    (pixel & 0x0000ff00) |
+	    ((pixel & 0xff) << 16));
 }
 
-static void
-fetch_pixels_b8g8r8a8 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_b8g8r8a8 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint32_t *)bits + offset);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint32_t *)bits + offset);
-	    
-	    buffer[i] = ((pixel & 0xff000000) >> 24 |
-	                 (pixel & 0x00ff0000) >> 8 |
-	                 (pixel & 0x0000ff00) << 8 |
-	                 (pixel & 0x000000ff) << 24);
-	}
-    }
+    return ((pixel & 0xff000000) >> 24 |
+	    (pixel & 0x00ff0000) >> 8 |
+	    (pixel & 0x0000ff00) << 8 |
+	    (pixel & 0x000000ff) << 24);
 }
 
-static void
-fetch_pixels_b8g8r8x8 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_b8g8r8x8 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint32_t *)bits + offset);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint32_t *)bits + offset);
-	    
-	    buffer[i] = ((0xff000000) |
-	                 (pixel & 0xff000000) >> 24 |
-	                 (pixel & 0x00ff0000) >> 8 |
-	                 (pixel & 0x0000ff00) << 8);
-	}
-    }
+    return ((0xff000000) |
+	    (pixel & 0xff000000) >> 24 |
+	    (pixel & 0x00ff0000) >> 8 |
+	    (pixel & 0x0000ff00) << 8);
 }
 
-static void
-fetch_pixels_r8g8b8 (bits_image_t *pict,
-                     uint32_t *    buffer,
-                     int           n_pixels)
+static uint32_t
+fetch_pixel_r8g8b8 (bits_image_t *image,
+		    int           offset,
+		    int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint8_t   *pixel = ((uint8_t *) bits) + (offset * 3);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint8_t   *pixel = ((uint8_t *) bits) + (offset * 3);
-	    
 #ifdef WORDS_BIGENDIAN
-	    buffer[i] = (0xff000000 |
-	                 (READ (pict, pixel + 0) << 16) |
-	                 (READ (pict, pixel + 1) << 8) |
-	                 (READ (pict, pixel + 2)));
+    return (0xff000000 |
+	    (READ (image, pixel + 0) << 16) |
+	    (READ (image, pixel + 1) << 8) |
+	    (READ (image, pixel + 2)));
 #else
-	    buffer[i] = (0xff000000 |
-	                 (READ (pict, pixel + 2) << 16) |
-	                 (READ (pict, pixel + 1) << 8) |
-	                 (READ (pict, pixel + 0)));
+    return (0xff000000 |
+	    (READ (image, pixel + 2) << 16) |
+	    (READ (image, pixel + 1) << 8) |
+	    (READ (image, pixel + 0)));
 #endif
-	}
-    }
 }
 
-static void
-fetch_pixels_b8g8r8 (bits_image_t *pict,
-                     uint32_t *    buffer,
-                     int           n_pixels)
+static uint32_t
+fetch_pixel_b8g8r8 (bits_image_t *image,
+		    int           offset,
+		    int           line)
 {
-    int i;
-    
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint8_t   *pixel = ((uint8_t *) bits) + (offset * 3);
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint8_t   *pixel = ((uint8_t *) bits) + (offset * 3);
 #ifdef WORDS_BIGENDIAN
-	    buffer[i] = (0xff000000 |
-	                 (READ (pict, pixel + 2) << 16) |
-	                 (READ (pict, pixel + 1) << 8) |
-	                 (READ (pict, pixel + 0)));
+    return (0xff000000 |
+	    (READ (image, pixel + 2) << 16) |
+	    (READ (image, pixel + 1) << 8) |
+	    (READ (image, pixel + 0)));
 #else
-	    buffer[i] = (0xff000000 |
-	                 (READ (pict, pixel + 0) << 16) |
-	                 (READ (pict, pixel + 1) << 8) |
-	                 (READ (pict, pixel + 2)));
+    return (0xff000000 |
+	    (READ (image, pixel + 0) << 16) |
+	    (READ (image, pixel + 1) << 8) |
+	    (READ (image, pixel + 2)));
 #endif
-	}
-    }
 }
 
-static void
-fetch_pixels_r5g6b5 (bits_image_t *pict,
-                     uint32_t *    buffer,
-                     int           n_pixels)
+static uint32_t
+fetch_pixel_r5g6b5 (bits_image_t *image,
+		    int           offset,
+		    int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t r, g, b;
-	    
-	    r = ((pixel & 0xf800) | ((pixel & 0xe000) >> 5)) << 8;
-	    g = ((pixel & 0x07e0) | ((pixel & 0x0600) >> 6)) << 5;
-	    b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
-
-	    buffer[i] = (0xff000000 | r | g | b);
-	}
-    }
+    r = ((pixel & 0xf800) | ((pixel & 0xe000) >> 5)) << 8;
+    g = ((pixel & 0x07e0) | ((pixel & 0x0600) >> 6)) << 5;
+    b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
+    
+    return (0xff000000 | r | g | b);
 }
 
-static void
-fetch_pixels_b5g6r5 (bits_image_t *pict,
-                     uint32_t *    buffer,
-                     int           n_pixels)
+static uint32_t
+fetch_pixel_b5g6r5 (bits_image_t *image,
+		    int           offset,
+		    int           line)
 {
-    int i;
+    uint32_t r, g, b;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t r, g, b;
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    
-	    b = ((pixel & 0xf800) | ((pixel & 0xe000) >> 5)) >> 8;
-	    g = ((pixel & 0x07e0) | ((pixel & 0x0600) >> 6)) << 5;
-	    r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
-	    
-	    buffer[i] = (0xff000000 | r | g | b);
-	}
-    }
+    b = ((pixel & 0xf800) | ((pixel & 0xe000) >> 5)) >> 8;
+    g = ((pixel & 0x07e0) | ((pixel & 0x0600) >> 6)) << 5;
+    r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
+    
+    return (0xff000000 | r | g | b);
 }
 
-static void
-fetch_pixels_a1r5g5b5 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a1r5g5b5 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t a, r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t a, r, g, b;
-	    
-	    a = (uint32_t) ((uint8_t) (0 - ((pixel & 0x8000) >> 15))) << 24;
-	    r = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) << 9;
-	    g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
-	    b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
-	    
-	    buffer[i] = (a | r | g | b);
-	}
-    }
+    a = (uint32_t) ((uint8_t) (0 - ((pixel & 0x8000) >> 15))) << 24;
+    r = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) << 9;
+    g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
+    b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
+    
+    return (a | r | g | b);
 }
 
-static void
-fetch_pixels_x1r5g5b5 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_x1r5g5b5 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t r, g, b;
-	    
-	    r = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) << 9;
-	    g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
-	    b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
-	    
-	    buffer[i] = (0xff000000 | r | g | b);
-	}
-    }
+    r = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) << 9;
+    g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
+    b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
+    
+    return (0xff000000 | r | g | b);
 }
 
-static void
-fetch_pixels_a1b5g5r5 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a1b5g5r5 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t a, r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t a, r, g, b;
-	    
-	    a = (uint32_t) ((uint8_t) (0 - ((pixel & 0x8000) >> 15))) << 24;
-	    b = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) >> 7;
-	    g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
-	    r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
-	    
-	    buffer[i] = (a | r | g | b);
-	}
-    }
+    a = (uint32_t) ((uint8_t) (0 - ((pixel & 0x8000) >> 15))) << 24;
+    b = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) >> 7;
+    g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
+    r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
+    
+    return (a | r | g | b);
 }
 
-static void
-fetch_pixels_x1b5g5r5 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_x1b5g5r5 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t r, g, b;
-	    
-	    b = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) >> 7;
-	    g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
-	    r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
-	    
-	    buffer[i] = (0xff000000 | r | g | b);
-	}
-    }
+    b = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) >> 7;
+    g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
+    r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
+    
+    return (0xff000000 | r | g | b);
 }
 
-static void
-fetch_pixels_a4r4g4b4 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a4r4g4b4 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t a, r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t a, r, g, b;
-	    
-	    a = ((pixel & 0xf000) | ((pixel & 0xf000) >> 4)) << 16;
-	    r = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) << 12;
-	    g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
-	    b = ((pixel & 0x000f) | ((pixel & 0x000f) << 4));
-	    
-	    buffer[i] = (a | r | g | b);
-	}
-    }
+    a = ((pixel & 0xf000) | ((pixel & 0xf000) >> 4)) << 16;
+    r = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) << 12;
+    g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
+    b = ((pixel & 0x000f) | ((pixel & 0x000f) << 4));
+    
+    return (a | r | g | b);
 }
 
-static void
-fetch_pixels_x4r4g4b4 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_x4r4g4b4 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t r, g, b;
-	    
-	    r = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) << 12;
-	    g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
-	    b = ((pixel & 0x000f) | ((pixel & 0x000f) << 4));
-	    
-	    buffer[i] = (0xff000000 | r | g | b);
-	}
-    }
+    r = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) << 12;
+    g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
+    b = ((pixel & 0x000f) | ((pixel & 0x000f) << 4));
+    
+    return (0xff000000 | r | g | b);
 }
 
-static void
-fetch_pixels_a4b4g4r4 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a4b4g4r4 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t a, r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t a, r, g, b;
-	    
-	    a = ((pixel & 0xf000) | ((pixel & 0xf000) >> 4)) << 16;
-	    b = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) >> 4;
-	    g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
-	    r = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)) << 16;
-	    
-	    buffer[i] = (a | r | g | b);
-	}
-    }
+    a = ((pixel & 0xf000) | ((pixel & 0xf000) >> 4)) << 16;
+    b = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) >> 4;
+    g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
+    r = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)) << 16;
+    
+    return (a | r | g | b);
 }
 
-static void
-fetch_pixels_x4b4g4r4 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_x4b4g4r4 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint16_t *) bits + offset);
-	    uint32_t r, g, b;
-	    
-	    b = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) >> 4;
-	    g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
-	    r = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)) << 16;
-	    
-	    buffer[i] = (0xff000000 | r | g | b);
-	}
-    }
+    b = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) >> 4;
+    g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
+    r = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)) << 16;
+    
+    return (0xff000000 | r | g | b);
 }
 
-static void
-fetch_pixels_a8 (bits_image_t *pict,
-                 uint32_t *    buffer,
-                 int           n_pixels)
+static uint32_t
+fetch_pixel_a8 (bits_image_t *image,
+		int           offset,
+		int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint8_t *) bits + offset);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint8_t *) bits + offset);
-	    
-	    buffer[i] = pixel << 24;
-	}
-    }
+    return pixel << 24;
 }
 
-static void
-fetch_pixels_r3g3b2 (bits_image_t *pict,
-                     uint32_t *    buffer,
-                     int           n_pixels)
+static uint32_t
+fetch_pixel_r3g3b2 (bits_image_t *image,
+		    int           offset,
+		    int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint8_t *) bits + offset);
-	    uint32_t r, g, b;
-	    
-	    r = ((pixel & 0xe0) |
-	         ((pixel & 0xe0) >> 3) |
-	         ((pixel & 0xc0) >> 6)) << 16;
-	    
-	    g = ((pixel & 0x1c) |
-	         ((pixel & 0x18) >> 3) |
-	         ((pixel & 0x1c) << 3)) << 8;
-	    
-	    b = (((pixel & 0x03)     ) |
-	         ((pixel & 0x03) << 2) |
-	         ((pixel & 0x03) << 4) |
-	         ((pixel & 0x03) << 6));
-	    
-	    buffer[i] = (0xff000000 | r | g | b);
-	}
-    }
+    r = ((pixel & 0xe0) |
+	 ((pixel & 0xe0) >> 3) |
+	 ((pixel & 0xc0) >> 6)) << 16;
+    
+    g = ((pixel & 0x1c) |
+	 ((pixel & 0x18) >> 3) |
+	 ((pixel & 0x1c) << 3)) << 8;
+    
+    b = (((pixel & 0x03)     ) |
+	 ((pixel & 0x03) << 2) |
+	 ((pixel & 0x03) << 4) |
+	 ((pixel & 0x03) << 6));
+    
+    return (0xff000000 | r | g | b);
 }
 
-static void
-fetch_pixels_b2g3r3 (bits_image_t *pict,
-                     uint32_t *    buffer,
-                     int           n_pixels)
+static uint32_t
+fetch_pixel_b2g3r3 (bits_image_t *image,
+		    int           offset,
+		    int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint8_t *) bits + offset);
-	    uint32_t r, g, b;
-	    
-	    b = ((pixel & 0xc0)         |
-	         ((pixel & 0xc0) >> 2)  |
-	         ((pixel & 0xc0) >> 4)  |
-	         ((pixel & 0xc0) >> 6));
-	    
-	    g = ((pixel & 0x38)         |
-	         ((pixel & 0x38) >> 3)  |
-	         ((pixel & 0x30) << 2)) << 8;
-	    
-	    r = ((pixel & 0x07)         |
-	         ((pixel & 0x07) << 3)  |
-	         ((pixel & 0x06) << 6)) << 16;
-	    
-	    buffer[i] = (0xff000000 | r | g | b);
-	}
-    }
+    b = ((pixel & 0xc0)         |
+	 ((pixel & 0xc0) >> 2)  |
+	 ((pixel & 0xc0) >> 4)  |
+	 ((pixel & 0xc0) >> 6));
+    
+    g = ((pixel & 0x38)         |
+	 ((pixel & 0x38) >> 3)  |
+	 ((pixel & 0x30) << 2)) << 8;
+    
+    r = ((pixel & 0x07)         |
+	 ((pixel & 0x07) << 3)  |
+	 ((pixel & 0x06) << 6)) << 16;
+    
+    return (0xff000000 | r | g | b);
 }
 
-static void
-fetch_pixels_a2r2g2b2 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a2r2g2b2 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+    uint32_t a, r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint8_t *) bits + offset);
-	    uint32_t a, r, g, b;
-	    
-	    a = ((pixel & 0xc0) * 0x55) << 18;
-	    r = ((pixel & 0x30) * 0x55) << 12;
-	    g = ((pixel & 0x0c) * 0x55) << 6;
-	    b = ((pixel & 0x03) * 0x55);
-	    
-	    buffer[i] = a | r | g | b;
-	}
-    }
+    a = ((pixel & 0xc0) * 0x55) << 18;
+    r = ((pixel & 0x30) * 0x55) << 12;
+    g = ((pixel & 0x0c) * 0x55) << 6;
+    b = ((pixel & 0x03) * 0x55);
+    
+    return a | r | g | b;
 }
 
-static void
-fetch_pixels_a2b2g2r2 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a2b2g2r2 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+    uint32_t a, r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint8_t *) bits + offset);
-	    uint32_t a, r, g, b;
-	    
-	    a = ((pixel & 0xc0) * 0x55) << 18;
-	    b = ((pixel & 0x30) * 0x55) >> 6;
-	    g = ((pixel & 0x0c) * 0x55) << 6;
-	    r = ((pixel & 0x03) * 0x55) << 16;
-	    
-	    buffer[i] = a | r | g | b;
-	}
-    }
+    a = ((pixel & 0xc0) * 0x55) << 18;
+    b = ((pixel & 0x30) * 0x55) >> 6;
+    g = ((pixel & 0x0c) * 0x55) << 6;
+    r = ((pixel & 0x03) * 0x55) << 16;
+    
+    return a | r | g | b;
 }
 
-static void
-fetch_pixels_c8 (bits_image_t *pict,
-                 uint32_t *    buffer,
-                 int           n_pixels)
+static uint32_t
+fetch_pixel_c8 (bits_image_t *image,
+		int           offset,
+		int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+    const pixman_indexed_t * indexed = image->indexed;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint8_t *) bits + offset);
-	    const pixman_indexed_t * indexed = pict->indexed;
-	    
-	    buffer[i] = indexed->rgba[pixel];
-	}
-    }
+    return indexed->rgba[pixel];
 }
 
-static void
-fetch_pixels_x4a4 (bits_image_t *pict,
-                   uint32_t *    buffer,
-                   int           n_pixels)
+static uint32_t
+fetch_pixel_x4a4 (bits_image_t *image,
+		  int           offset,
+		  int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, (uint8_t *) bits + offset);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, (uint8_t *) bits + offset);
-	    
-	    buffer[i] = ((pixel & 0xf) | ((pixel & 0xf) << 4)) << 24;
-	}
-    }
+    return ((pixel & 0xf) | ((pixel & 0xf) << 4)) << 24;
 }
 
-static void
-fetch_pixels_a4 (bits_image_t *pict,
-                 uint32_t *    buffer,
-                 int           n_pixels)
+static uint32_t
+fetch_pixel_a4 (bits_image_t *image,
+		int           offset,
+		int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = FETCH_4 (image, bits, offset);
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = FETCH_4 (pict, bits, offset);
-	    
-	    pixel |= pixel << 4;
-	    buffer[i] = pixel << 24;
-	}
-    }
+    pixel |= pixel << 4;
+    return pixel << 24;
 }
 
-static void
-fetch_pixels_r1g2b1 (bits_image_t *pict,
-                     uint32_t *    buffer,
-                     int           n_pixels)
+static uint32_t
+fetch_pixel_r1g2b1 (bits_image_t *image,
+		    int           offset,
+		    int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = FETCH_4 (image, bits, offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = FETCH_4 (pict, bits, offset);
-	    uint32_t r, g, b;
-	    
-	    r = ((pixel & 0x8) * 0xff) << 13;
-	    g = ((pixel & 0x6) * 0x55) << 7;
-	    b = ((pixel & 0x1) * 0xff);
-	    
-	    buffer[i] = 0xff000000 | r | g | b;
-	}
-    }
+    r = ((pixel & 0x8) * 0xff) << 13;
+    g = ((pixel & 0x6) * 0x55) << 7;
+    b = ((pixel & 0x1) * 0xff);
+    
+    return 0xff000000 | r | g | b;
 }
 
-static void
-fetch_pixels_b1g2r1 (bits_image_t *pict,
-                     uint32_t *    buffer,
-                     int           n_pixels)
+static uint32_t
+fetch_pixel_b1g2r1 (bits_image_t *image,
+		    int           offset,
+		    int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = FETCH_4 (image, bits, offset);
+    uint32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = FETCH_4 (pict, bits, offset);
-	    uint32_t r, g, b;
-	    
-	    b = ((pixel & 0x8) * 0xff) >> 3;
-	    g = ((pixel & 0x6) * 0x55) << 7;
-	    r = ((pixel & 0x1) * 0xff) << 16;
-	    
-	    buffer[i] = 0xff000000 | r | g | b;
-	}
-    }
+    b = ((pixel & 0x8) * 0xff) >> 3;
+    g = ((pixel & 0x6) * 0x55) << 7;
+    r = ((pixel & 0x1) * 0xff) << 16;
+    
+    return 0xff000000 | r | g | b;
 }
 
-static void
-fetch_pixels_a1r1g1b1 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a1r1g1b1 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = FETCH_4 (image, bits, offset);
+    uint32_t a, r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = FETCH_4 (pict, bits, offset);
-	    uint32_t a, r, g, b;
-	    
-	    a = ((pixel & 0x8) * 0xff) << 21;
-	    r = ((pixel & 0x4) * 0xff) << 14;
-	    g = ((pixel & 0x2) * 0xff) << 7;
-	    b = ((pixel & 0x1) * 0xff);
-	    
-	    buffer[i] = a | r | g | b;
-	}
-    }
+    a = ((pixel & 0x8) * 0xff) << 21;
+    r = ((pixel & 0x4) * 0xff) << 14;
+    g = ((pixel & 0x2) * 0xff) << 7;
+    b = ((pixel & 0x1) * 0xff);
+    
+    return a | r | g | b;
 }
 
-static void
-fetch_pixels_a1b1g1r1 (bits_image_t *pict,
-                       uint32_t *    buffer,
-                       int           n_pixels)
+static uint32_t
+fetch_pixel_a1b1g1r1 (bits_image_t *image,
+		      int           offset,
+		      int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = FETCH_4 (image, bits, offset);
+    uint32_t a, r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = FETCH_4 (pict, bits, offset);
-	    uint32_t a, r, g, b;
-	    
-	    a = ((pixel & 0x8) * 0xff) << 21;
-	    r = ((pixel & 0x4) * 0xff) >> 3;
-	    g = ((pixel & 0x2) * 0xff) << 7;
-	    b = ((pixel & 0x1) * 0xff) << 16;
-	    
-	    buffer[i] = a | r | g | b;
-	}
-    }
+    a = ((pixel & 0x8) * 0xff) << 21;
+    r = ((pixel & 0x4) * 0xff) >> 3;
+    g = ((pixel & 0x2) * 0xff) << 7;
+    b = ((pixel & 0x1) * 0xff) << 16;
+    
+    return a | r | g | b;
 }
 
-static void
-fetch_pixels_c4 (bits_image_t *pict,
-                 uint32_t *    buffer,
-                 int           n_pixels)
+static uint32_t
+fetch_pixel_c4 (bits_image_t *image,
+		int           offset,
+		int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = FETCH_4 (image, bits, offset);
+    const pixman_indexed_t * indexed = image->indexed;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = FETCH_4 (pict, bits, offset);
-	    const pixman_indexed_t * indexed = pict->indexed;
-	    
-	    buffer[i] = indexed->rgba[pixel];
-	}
-    }
+    return indexed->rgba[pixel];
 }
 
-static void
-fetch_pixels_a1 (bits_image_t *pict,
-                 uint32_t *    buffer,
-                 int           n_pixels)
+static uint32_t
+fetch_pixel_a1 (bits_image_t *image,
+		int           offset,
+		int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, bits + (offset >> 5));
+    uint32_t a;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, bits + (offset >> 5));
-	    uint32_t a;
-	    
 #ifdef WORDS_BIGENDIAN
-	    a = pixel >> (0x1f - (offset & 0x1f));
+    a = pixel >> (0x1f - (offset & 0x1f));
 #else
-	    a = pixel >> (offset & 0x1f);
+    a = pixel >> (offset & 0x1f);
 #endif
-	    a = a & 1;
-	    a |= a << 1;
-	    a |= a << 2;
-	    a |= a << 4;
-	    
-	    buffer[i] = a << 24;
-	}
-    }
+    a = a & 1;
+    a |= a << 1;
+    a |= a << 2;
+    a |= a << 4;
+    
+    return a << 24;
 }
 
-static void
-fetch_pixels_g1 (bits_image_t *pict,
-                 uint32_t *    buffer,
-                 int           n_pixels)
+static uint32_t
+fetch_pixel_g1 (bits_image_t *image,
+		int           offset,
+		int           line)
 {
-    int i;
+    uint32_t *bits = image->bits + line * image->rowstride;
+    uint32_t pixel = READ (image, bits + (offset >> 5));
+    const pixman_indexed_t * indexed = image->indexed;
+    uint32_t a;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    uint32_t *bits = pict->bits + line * pict->rowstride;
-	    uint32_t pixel = READ (pict, bits + (offset >> 5));
-	    const pixman_indexed_t * indexed = pict->indexed;
-	    uint32_t a;
-	    
 #ifdef WORDS_BIGENDIAN
-	    a = pixel >> (0x1f - (offset & 0x1f));
+    a = pixel >> (0x1f - (offset & 0x1f));
 #else
-	    a = pixel >> (offset & 0x1f);
+    a = pixel >> (offset & 0x1f);
 #endif
-	    a = a & 1;
-	    
-	    buffer[i] = indexed->rgba[a];
-	}
-    }
+    a = a & 1;
+    
+    return indexed->rgba[a];
 }
 
-static void
-fetch_pixels_yuy2 (bits_image_t *pict,
-                   uint32_t *    buffer,
-                   int           n_pixels)
+static uint32_t
+fetch_pixel_yuy2 (bits_image_t *image,
+		  int           offset,
+		  int           line)
 {
-    int i;
+    const uint32_t *bits = image->bits + image->rowstride * line;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    const uint32_t *bits = pict->bits + pict->rowstride * line;
-	    
-	    int16_t y, u, v;
-	    int32_t r, g, b;
-	    
-	    y = ((uint8_t *) bits)[offset << 1] - 16;
-	    u = ((uint8_t *) bits)[((offset << 1) & - 4) + 1] - 128;
-	    v = ((uint8_t *) bits)[((offset << 1) & - 4) + 3] - 128;
-	    
-	    /* R = 1.164(Y - 16) + 1.596(V - 128) */
-	    r = 0x012b27 * y + 0x019a2e * v;
-	    
-	    /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */
-	    g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u;
-	    
-	    /* B = 1.164(Y - 16) + 2.018(U - 128) */
-	    b = 0x012b27 * y + 0x0206a2 * u;
-	    
-	    buffer[i] = 0xff000000 |
-		(r >= 0 ? r < 0x1000000 ? r         & 0xff0000 : 0xff0000 : 0) |
-		(g >= 0 ? g < 0x1000000 ? (g >> 8)  & 0x00ff00 : 0x00ff00 : 0) |
-		(b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0);
-	}
-    }
+    int16_t y, u, v;
+    int32_t r, g, b;
+    
+    y = ((uint8_t *) bits)[offset << 1] - 16;
+    u = ((uint8_t *) bits)[((offset << 1) & - 4) + 1] - 128;
+    v = ((uint8_t *) bits)[((offset << 1) & - 4) + 3] - 128;
+    
+    /* R = 1.164(Y - 16) + 1.596(V - 128) */
+    r = 0x012b27 * y + 0x019a2e * v;
+    
+    /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */
+    g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u;
+    
+    /* B = 1.164(Y - 16) + 2.018(U - 128) */
+    b = 0x012b27 * y + 0x0206a2 * u;
+    
+    return 0xff000000 |
+	(r >= 0 ? r < 0x1000000 ? r         & 0xff0000 : 0xff0000 : 0) |
+	(g >= 0 ? g < 0x1000000 ? (g >> 8)  & 0x00ff00 : 0x00ff00 : 0) |
+	(b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0);
 }
 
-static void
-fetch_pixels_yv12 (bits_image_t *pict,
-                   uint32_t *    buffer,
-                   int           n_pixels)
+static uint32_t
+fetch_pixel_yv12 (bits_image_t *image,
+		  int           offset,
+		  int           line)
 {
-    int i;
+    YV12_SETUP (image);
+    int16_t y = YV12_Y (line)[offset] - 16;
+    int16_t u = YV12_U (line)[offset >> 1] - 128;
+    int16_t v = YV12_V (line)[offset >> 1] - 128;
+    int32_t r, g, b;
     
-    for (i = 0; i < n_pixels; ++i)
-    {
-	int offset = buffer[2 * i];
-	int line = buffer[2 * i + 1];
-	
-	if (offset == 0xffffffff || line == 0xffffffff)
-	{
-	    buffer[i] = 0;
-	}
-	else
-	{
-	    YV12_SETUP (pict);
-	    int16_t y = YV12_Y (line)[offset] - 16;
-	    int16_t u = YV12_U (line)[offset >> 1] - 128;
-	    int16_t v = YV12_V (line)[offset >> 1] - 128;
-	    int32_t r, g, b;
-	    
-	    /* R = 1.164(Y - 16) + 1.596(V - 128) */
-	    r = 0x012b27 * y + 0x019a2e * v;
-	    
-	    /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */
-	    g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u;
-	    
-	    /* B = 1.164(Y - 16) + 2.018(U - 128) */
-	    b = 0x012b27 * y + 0x0206a2 * u;
-	    
-	    buffer[i] = 0xff000000 |
-		(r >= 0 ? r < 0x1000000 ? r         & 0xff0000 : 0xff0000 : 0) |
-		(g >= 0 ? g < 0x1000000 ? (g >> 8)  & 0x00ff00 : 0x00ff00 : 0) |
-		(b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0);
-	}
-    }
+    /* R = 1.164(Y - 16) + 1.596(V - 128) */
+    r = 0x012b27 * y + 0x019a2e * v;
+    
+    /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */
+    g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u;
+    
+    /* B = 1.164(Y - 16) + 2.018(U - 128) */
+    b = 0x012b27 * y + 0x0206a2 * u;
+    
+    return 0xff000000 |
+	(r >= 0 ? r < 0x1000000 ? r         & 0xff0000 : 0xff0000 : 0) |
+	(g >= 0 ? g < 0x1000000 ? (g >> 8)  & 0x00ff00 : 0x00ff00 : 0) |
+	(b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0);
 }
 
 /*********************************** Store ************************************/
@@ -2762,7 +2174,7 @@ store_scanline_a1b5g5r5 (bits_image_t *  image,
     for (i = 0; i < width; ++i)
     {
 	SPLIT_A (values[i]);
-
+	
 	WRITE (image, pixel++,
 	       ((a << 8) & 0x8000) |
 	       ((b << 7) & 0x7c00) |
@@ -2785,7 +2197,7 @@ store_scanline_x1b5g5r5 (bits_image_t *  image,
     for (i = 0; i < width; ++i)
     {
 	SPLIT (values[i]);
-
+	
 	WRITE (image, pixel++, ((b << 7) & 0x7c00) |
 	       ((g << 2) & 0x03e0) |
 	       ((r >> 3)         ));
@@ -2806,7 +2218,7 @@ store_scanline_a4r4g4b4 (bits_image_t *  image,
     for (i = 0; i < width; ++i)
     {
 	SPLIT_A (values[i]);
-
+	
 	WRITE (image, pixel++,
 	       ((a << 8) & 0xf000) |
 	       ((r << 4) & 0x0f00) |
@@ -2829,7 +2241,7 @@ store_scanline_x4r4g4b4 (bits_image_t *  image,
     for (i = 0; i < width; ++i)
     {
 	SPLIT (values[i]);
-
+	
 	WRITE (image, pixel++,
 	       ((r << 4) & 0x0f00) |
 	       ((g     ) & 0x00f0) |
@@ -2872,7 +2284,7 @@ store_scanline_x4b4g4r4 (bits_image_t *  image,
     for (i = 0; i < width; ++i)
     {
 	SPLIT (values[i]);
-
+	
 	WRITE (image, pixel++,
 	       ((b << 4) & 0x0f00) |
 	       ((g     ) & 0x00f0) |
@@ -2933,7 +2345,7 @@ store_scanline_b2g3r3 (bits_image_t *  image,
     for (i = 0; i < width; ++i)
     {
 	SPLIT (values[i]);
-
+	
 	WRITE (image, pixel++,
 	       ((b     ) & 0xc0) |
 	       ((g >> 2) & 0x38) |
@@ -2955,7 +2367,7 @@ store_scanline_a2r2g2b2 (bits_image_t *  image,
     for (i = 0; i < width; ++i)
     {
 	SPLIT_A (values[i]);
-
+	
 	WRITE (image, pixel++,
 	       ((a     ) & 0xc0) |
 	       ((r >> 2) & 0x30) |
@@ -2978,7 +2390,7 @@ store_scanline_a2b2g2r2 (bits_image_t *  image,
     for (i = 0; i < width; ++i)
     {
 	SPLIT_A (values[i]);
-
+	
 	*(pixel++) =
 	    ((a     ) & 0xc0) |
 	    ((b >> 2) & 0x30) |
@@ -3020,12 +2432,12 @@ store_scanline_x4a4 (bits_image_t *  image,
 
 #define STORE_8(img,l,o,v)  (WRITE (img, (uint8_t *)(l) + ((o) >> 3), (v)))
 #ifdef WORDS_BIGENDIAN
-#define STORE_4(img,l,o,v)					   \
+#define STORE_4(img,l,o,v)					    \
     STORE_8 (img,l,o,((o) & 4 ?					    \
                       (FETCH_8 (img,l,o) & 0xf0) | (v) :            \
                       (FETCH_8 (img,l,o) & 0x0f) | ((v) << 4)))
 #else
-#define STORE_4(img,l,o,v)				       \
+#define STORE_4(img,l,o,v)					\
     STORE_8 (img,l,o,((o) & 4 ?					\
                       (FETCH_8 (img,l,o) & 0x0f) | ((v) << 4) : \
                       (FETCH_8 (img,l,o) & 0xf0) | (v)))
@@ -3169,7 +2581,7 @@ store_scanline_a1 (bits_image_t *  image,
     {
 	uint32_t  *pixel = ((uint32_t *) bits) + ((i + x) >> 5);
 	uint32_t mask, v;
-
+	
 #ifdef WORDS_BIGENDIAN
 	mask = 1 << (0x1f - ((i + x) & 0x1f));
 #else
@@ -3196,14 +2608,14 @@ store_scanline_g1 (bits_image_t *  image,
     {
 	uint32_t  *pixel = ((uint32_t *) bits) + ((i + x) >> 5);
 	uint32_t mask, v;
-
+	
 #ifdef WORDS_BIGENDIAN
 	mask = 1 << (0x1f - ((i + x) & 0x1f));
 #else
 	mask = 1 << ((i + x) & 0x1f);
 #endif
 	v = RGB24_TO_ENTRY_Y (indexed, values[i]) ? mask : 0;
-
+	
 	WRITE (image, pixel, (READ (image, pixel) & ~mask) | v);
     }
 }
@@ -3258,14 +2670,17 @@ fetch_scanline_generic_64 (pixman_image_t *image,
 }
 
 /* Despite the type, this function expects a uint64_t *buffer */
-static void
-fetch_pixels_generic_64 (bits_image_t *pict,
-                         uint32_t *    buffer,
-                         int           n_pixels)
+static uint64_t
+fetch_pixel_generic_64 (bits_image_t *image,
+			int	      offset,
+			int           line)
 {
-    pict->fetch_pixels_raw_32 (pict, buffer, n_pixels);
+    uint32_t pixel32 = image->fetch_pixel_raw_32 (image, offset, line);
+    uint64_t result;
     
-    pixman_expand ((uint64_t *)buffer, buffer, pict->format, n_pixels);
+    pixman_expand ((uint64_t *)&result, &pixel32, image->format, 1);
+
+    return result;
 }
 
 /*
@@ -3274,17 +2689,17 @@ fetch_pixels_generic_64 (bits_image_t *pict,
  *
  * WARNING: This function loses precision!
  */
-static void
-fetch_pixels_generic_lossy_32 (bits_image_t *pict,
-                               uint32_t *    buffer,
-                               int           n_pixels)
+static uint32_t
+fetch_pixel_generic_lossy_32 (bits_image_t *image,
+			      int           offset,
+			      int           line)
 {
-    /* Since buffer contains n_pixels coordinate pairs, it also has enough
-     * room for n_pixels 64 bit pixels.
-     */
-    pict->fetch_pixels_raw_64 (pict, buffer, n_pixels);
+    uint64_t pixel64 = image->fetch_pixel_raw_64 (image, offset, line);
+    uint32_t result;
     
-    pixman_contract (buffer, (uint64_t *)buffer, n_pixels);
+    pixman_contract (&result, &pixel64, 1);
+
+    return result;
 }
 
 typedef struct
@@ -3292,8 +2707,8 @@ typedef struct
     pixman_format_code_t	format;
     fetch_scanline_t		fetch_scanline_raw_32;
     fetch_scanline_t		fetch_scanline_raw_64;
-    fetch_pixels_t		fetch_pixels_raw_32;
-    fetch_pixels_t		fetch_pixels_raw_64;
+    fetch_pixel_32_t		fetch_pixel_raw_32;
+    fetch_pixel_64_t		fetch_pixel_raw_64;
     store_scanline_t		store_scanline_raw_32;
     store_scanline_t		store_scanline_raw_64;
 } format_info_t;
@@ -3303,9 +2718,9 @@ typedef struct
 	PIXMAN_ ## format,						\
 	    fetch_scanline_ ## format,					\
 	    fetch_scanline_generic_64,					\
-	    fetch_pixels_ ## format, fetch_pixels_generic_64,		\
+	    fetch_pixel_ ## format, fetch_pixel_generic_64,		\
 	    store_scanline_ ## format, store_scanline_generic_64	\
-	    }
+    }
 
 static const format_info_t accessors[] =
 {
@@ -3344,17 +2759,17 @@ static const format_info_t accessors[] =
     FORMAT_INFO (c8),
     
 #define fetch_scanline_g8 fetch_scanline_c8
-#define fetch_pixels_g8 fetch_pixels_c8
+#define fetch_pixel_g8 fetch_pixel_c8
 #define store_scanline_g8 store_scanline_c8
     FORMAT_INFO (g8),
-
+    
 #define fetch_scanline_x4c4 fetch_scanline_c8
-#define fetch_pixels_x4c4 fetch_pixels_c8
+#define fetch_pixel_x4c4 fetch_pixel_c8
 #define store_scanline_x4c4 store_scanline_c8
     FORMAT_INFO (x4c4),
-
+    
 #define fetch_scanline_x4g4 fetch_scanline_c8
-#define fetch_pixels_x4g4 fetch_pixels_c8
+#define fetch_pixel_x4g4 fetch_pixel_c8
 #define store_scanline_x4g4 store_scanline_c8
     FORMAT_INFO (x4g4),
     
@@ -3368,9 +2783,9 @@ static const format_info_t accessors[] =
     FORMAT_INFO (a1b1g1r1),
     
     FORMAT_INFO (c4),
-
+    
 #define fetch_scanline_g4 fetch_scanline_c4
-#define fetch_pixels_g4 fetch_pixels_c4
+#define fetch_pixel_g4 fetch_pixel_c4
 #define store_scanline_g4 store_scanline_c4
     FORMAT_INFO (g4),
     
@@ -3382,33 +2797,33 @@ static const format_info_t accessors[] =
     
     { PIXMAN_a2r10g10b10,
       NULL, fetch_scanline_a2r10g10b10,
-      fetch_pixels_generic_lossy_32, fetch_pixels_a2r10g10b10_64,
+      fetch_pixel_generic_lossy_32, fetch_pixel_a2r10g10b10,
       NULL, store_scanline_a2r10g10b10 },
     
     { PIXMAN_x2r10g10b10,
       NULL, fetch_scanline_x2r10g10b10,
-      fetch_pixels_generic_lossy_32, fetch_pixels_x2r10g10b10_64,
+      fetch_pixel_generic_lossy_32, fetch_pixel_x2r10g10b10,
       NULL, store_scanline_x2r10g10b10 },
     
     { PIXMAN_a2b10g10r10,
       NULL, fetch_scanline_a2b10g10r10,
-      fetch_pixels_generic_lossy_32, fetch_pixels_a2b10g10r10_64,
+      fetch_pixel_generic_lossy_32, fetch_pixel_a2b10g10r10,
       NULL, store_scanline_a2b10g10r10 },
     
     { PIXMAN_x2b10g10r10,
       NULL, fetch_scanline_x2b10g10r10,
-      fetch_pixels_generic_lossy_32, fetch_pixels_x2b10g10r10_64,
+      fetch_pixel_generic_lossy_32, fetch_pixel_x2b10g10r10,
       NULL, store_scanline_x2b10g10r10 },
     
 /* YUV formats */
     { PIXMAN_yuy2,
       fetch_scanline_yuy2, fetch_scanline_generic_64,
-      fetch_pixels_yuy2, fetch_pixels_generic_64,
+      fetch_pixel_yuy2, fetch_pixel_generic_64,
       NULL, NULL },
-
+    
     { PIXMAN_yv12,
       fetch_scanline_yv12, fetch_scanline_generic_64,
-      fetch_pixels_yv12, fetch_pixels_generic_64,
+      fetch_pixel_yv12, fetch_pixel_generic_64,
       NULL, NULL },
     
     { PIXMAN_null },
@@ -3425,8 +2840,8 @@ setup_accessors (bits_image_t *image)
 	{
 	    image->fetch_scanline_raw_32 = info->fetch_scanline_raw_32;
 	    image->fetch_scanline_raw_64 = info->fetch_scanline_raw_64;
-	    image->fetch_pixels_raw_32 = info->fetch_pixels_raw_32;
-	    image->fetch_pixels_raw_64 = info->fetch_pixels_raw_64;
+	    image->fetch_pixel_raw_32 = info->fetch_pixel_raw_32;
+	    image->fetch_pixel_raw_64 = info->fetch_pixel_raw_64;
 	    image->store_scanline_raw_32 = info->store_scanline_raw_32;
 	    image->store_scanline_raw_64 = info->store_scanline_raw_64;
 	    
diff --git a/pixman/pixman/pixman-arm-neon.c b/pixman/pixman/pixman-arm-neon.c
index 14f74822a..4125d1b0c 100644
--- a/pixman/pixman/pixman-arm-neon.c
+++ b/pixman/pixman/pixman-arm-neon.c
@@ -835,7 +835,7 @@ neon_composite_over_n_8_0565 (pixman_implementation_t * impl,
 	    w = width;
 
 
-#ifndef USE_GCC_INLINE_ASM
+#if 1 /* #ifndef USE_GCC_INLINE_ASM */
 	    uint8x8_t alpha;
 	    uint16x8_t dval, temp;
 	    uint8x8x4_t sval8temp;
@@ -872,6 +872,7 @@ neon_composite_over_n_8_0565 (pixman_implementation_t * impl,
 	    if (w&4)
 		vst1q_lane_u64 ((void *)dst4, vreinterpretq_u64_u16 (temp),1);
 #else
+	    /* this code has some bug (does not pass blitters-test) */
 	    asm volatile (
 		"vdup.32      d0, %[src]\n\t"
 		"vdup.8       d1, d0[1]\n\t"
diff --git a/pixman/pixman/pixman-bits-image.c b/pixman/pixman/pixman-bits-image.c
index ff296208b..6b8018985 100644
--- a/pixman/pixman/pixman-bits-image.c
+++ b/pixman/pixman/pixman-bits-image.c
@@ -93,523 +93,331 @@ _pixman_image_store_scanline_64 (bits_image_t *  image,
 
 /* Fetch functions */
 
-/* On entry, @buffer should contain @n_pixels (x, y) coordinate pairs, where
- * x and y are both uint32_ts. On exit, buffer will contain the corresponding
- * pixels.
- *
- * The coordinates must be within the sample grid. If either x or y is 0xffffffff,
- * the pixel returned will be 0.
- */
-static void
-bits_image_fetch_raw_pixels (bits_image_t *image,
-                             uint32_t *    buffer,
-                             int           n_pixels)
+static uint32_t
+bits_image_fetch_pixel_alpha (bits_image_t *image, int x, int y)
 {
-    image->fetch_pixels_raw_32 (image, buffer, n_pixels);
-}
+    uint32_t pixel;
+    uint32_t pixel_a;
 
-static void
-bits_image_fetch_alpha_pixels (bits_image_t *image,
-                               uint32_t *    buffer,
-                               int           n_pixels)
-{
-#define N_ALPHA_PIXELS 256
+    pixel = image->fetch_pixel_raw_32 (image, x, y);
 
-    uint32_t alpha_pixels[N_ALPHA_PIXELS * 2];
-    int i;
+    assert (image->common.alpha_map);
 
-    if (!image->common.alpha_map)
+    x -= image->common.alpha_origin_x;
+    y -= image->common.alpha_origin_y;
+
+    if (x < 0 || x >= image->common.alpha_map->width ||
+	y < 0 || y >= image->common.alpha_map->height)
     {
-	bits_image_fetch_raw_pixels (image, buffer, n_pixels);
-	return;
+	pixel_a = 0;
     }
-
-    /* Alpha map */
-    i = 0;
-    while (i < n_pixels)
+    else
     {
-	int tmp_n_pixels = MIN (N_ALPHA_PIXELS, n_pixels - i);
-	int j;
-	int32_t *coords;
-
-	memcpy (alpha_pixels, buffer + 2 * i, tmp_n_pixels * 2 * sizeof (int32_t));
-	coords = (int32_t *)alpha_pixels;
-	for (j = 0; j < tmp_n_pixels; ++j)
-	{
-	    int32_t x = coords[0];
-	    int32_t y = coords[1];
-
-	    if (x != 0xffffffff)
-	    {
-		x -= image->common.alpha_origin_x;
-
-		if (x < 0 || x >= image->common.alpha_map->width)
-		    x = 0xffffffff;
-	    }
-
-	    if (y != 0xffffffff)
-	    {
-		y -= image->common.alpha_origin_y;
-
-		if (y < 0 || y >= image->common.alpha_map->height)
-		    y = 0xffffffff;
-	    }
-
-	    coords[0] = x;
-	    coords[1] = y;
-
-	    coords += 2;
-	}
-
-	bits_image_fetch_raw_pixels (image->common.alpha_map, alpha_pixels,
-	                             tmp_n_pixels);
-	bits_image_fetch_raw_pixels (image, buffer + 2 * i, tmp_n_pixels);
-
-	for (j = 0; j < tmp_n_pixels; ++j)
-	{
-	    int a = alpha_pixels[j] >> 24;
-	    uint32_t p = buffer[2 * i - j] | 0xff000000;
+	pixel_a = image->fetch_pixel_raw_32 (
+	    image->common.alpha_map, x, y);
+	pixel_a = ALPHA_8 (pixel_a);
+    }
 
-	    UN8x4_MUL_UN8 (p, a);
+    UN8x4_MUL_UN8 (pixel, pixel_a);
 
-	    buffer[i++] = p;
-	}
-    }
+    return pixel;
 }
 
-static void
-bits_image_fetch_pixels_src_clip (bits_image_t *image,
-                                  uint32_t *    buffer,
-                                  int           n_pixels)
+static force_inline uint32_t
+get_pixel (bits_image_t *image, int x, int y, pixman_bool_t check_bounds)
 {
-    bits_image_fetch_alpha_pixels (image, buffer, n_pixels);
+    if (check_bounds &&
+	(x < 0 || x >= image->width || y < 0 || y >= image->height))
+    {
+	return 0;
+    }
+
+    return image->fetch_pixel_32 (image, x, y);
 }
 
 static force_inline void
-repeat (pixman_repeat_t repeat,
-        int             width,
-        int             height,
-        int *           x,
-        int *           y)
+repeat (pixman_repeat_t repeat, int size, int *coord)
 {
     switch (repeat)
     {
     case PIXMAN_REPEAT_NORMAL:
-	*x = MOD (*x, width);
-	*y = MOD (*y, height);
+	*coord = MOD (*coord, size);
 	break;
 
     case PIXMAN_REPEAT_PAD:
-	*x = CLIP (*x, 0, width - 1);
-	*y = CLIP (*y, 0, height - 1);
+	*coord = CLIP (*coord, 0, size - 1);
 	break;
 
     case PIXMAN_REPEAT_REFLECT:
-	*x = MOD (*x, width * 2);
-	*y = MOD (*y, height * 2);
+	*coord = MOD (*coord, size * 2);
 
-	if (*x >= width)
-	    *x = width * 2 - *x - 1;
-
-	if (*y >= height)
-	    *y = height * 2 - *y - 1;
+	if (*coord >= size)
+	    *coord = size * 2 - *coord - 1;
 	break;
 
     case PIXMAN_REPEAT_NONE:
-	if (*x < 0 || *x >= width)
-	    *x = 0xffffffff;
-
-	if (*y < 0 || *y >= height)
-	    *y = 0xffffffff;
 	break;
     }
 }
 
-/* Buffer contains list of fixed-point coordinates on input,
- * a list of pixels on output
- */
-static void
-bits_image_fetch_nearest_pixels (bits_image_t *image,
-                                 uint32_t *    buffer,
-                                 int           n_pixels)
+static force_inline uint32_t
+bits_image_fetch_pixel_nearest (bits_image_t   *image,
+				pixman_fixed_t  x,
+				pixman_fixed_t  y)
 {
-    pixman_repeat_t repeat_mode = image->common.repeat;
-    int width = image->width;
-    int height = image->height;
-    int i;
+    int x0 = pixman_fixed_to_int (x - pixman_fixed_e);
+    int y0 = pixman_fixed_to_int (y - pixman_fixed_e);
 
-    for (i = 0; i < 2 * n_pixels; i += 2)
+    if (image->common.repeat != PIXMAN_REPEAT_NONE)
     {
-	int32_t *coords = (int32_t *)buffer;
-	int32_t x, y;
-
-	/* Subtract pixman_fixed_e to ensure that 0.5 rounds to 0, not 1 */
-	x = pixman_fixed_to_int (coords[i] - pixman_fixed_e);
-	y = pixman_fixed_to_int (coords[i + 1] - pixman_fixed_e);
+	repeat (image->common.repeat, image->width, &x0);
+	repeat (image->common.repeat, image->height, &y0);
 
-	repeat (repeat_mode, width, height, &x, &y);
-
-	coords[i] = x;
-	coords[i + 1] = y;
+	return get_pixel (image, x0, y0, FALSE);
+    }
+    else
+    {
+	return get_pixel (image, x0, y0, TRUE);
     }
-
-    bits_image_fetch_pixels_src_clip (image, buffer, n_pixels);
 }
 
-#define N_TMP_PIXELS    (256)
-
-/* Buffer contains list of fixed-point coordinates on input,
- * a list of pixels on output
- */
-static void
-bits_image_fetch_bilinear_pixels (bits_image_t *image,
-                                  uint32_t *    buffer,
-                                  int           n_pixels)
+static force_inline uint32_t
+bits_image_fetch_pixel_bilinear (bits_image_t   *image,
+				 pixman_fixed_t  x,
+				 pixman_fixed_t  y)
 {
-/* (Four pixels * two coordinates) per pixel */
-#define N_TEMPS         (N_TMP_PIXELS * 8)
-#define N_DISTS         (N_TMP_PIXELS * 2)
-
-    uint32_t temps[N_TEMPS];
-    int32_t dists[N_DISTS];
     pixman_repeat_t repeat_mode = image->common.repeat;
     int width = image->width;
     int height = image->height;
-    int32_t *coords;
-    int i;
-
-    i = 0;
-    coords = (int32_t *)buffer;
-    while (i < n_pixels)
-    {
-	int tmp_n_pixels = MIN (N_TMP_PIXELS, n_pixels - i);
-	int32_t distx, disty;
-	uint32_t *u;
-	int32_t *t, *d;
-	int j;
-
-	t = (int32_t *)temps;
-	d = dists;
-	for (j = 0; j < tmp_n_pixels; ++j)
-	{
-	    int32_t x1, y1, x2, y2;
+    int x1, y1, x2, y2;
+    uint32_t tl, tr, bl, br, r;
+    int32_t distx, disty, idistx, idisty;
+    uint32_t ft, fb;
 
-	    x1 = coords[0] - pixman_fixed_1 / 2;
-	    y1 = coords[1] - pixman_fixed_1 / 2;
+    x1 = x - pixman_fixed_1 / 2;
+    y1 = y - pixman_fixed_1 / 2;
 
-	    distx = (x1 >> 8) & 0xff;
-	    disty = (y1 >> 8) & 0xff;
+    distx = (x1 >> 8) & 0xff;
+    disty = (y1 >> 8) & 0xff;
 
-	    x1 >>= 16;
-	    y1 >>= 16;
-	    x2 = x1 + 1;
-	    y2 = y1 + 1;
+    x1 = pixman_fixed_to_int (x1);
+    y1 = pixman_fixed_to_int (y1);
+    x2 = x1 + 1;
+    y2 = y1 + 1;
 
-	    repeat (repeat_mode, width, height, &x1, &y1);
-	    repeat (repeat_mode, width, height, &x2, &y2);
-
-	    *t++ = x1;
-	    *t++ = y1;
-	    *t++ = x2;
-	    *t++ = y1;
-	    *t++ = x1;
-	    *t++ = y2;
-	    *t++ = x2;
-	    *t++ = y2;
-
-	    *d++ = distx;
-	    *d++ = disty;
-
-	    coords += 2;
-	}
-
-	bits_image_fetch_pixels_src_clip (image, temps, tmp_n_pixels * 4);
-
-	u = (uint32_t *)temps;
-	d = dists;
-	for (j = 0; j < tmp_n_pixels; ++j)
-	{
-	    uint32_t tl, tr, bl, br, r;
-	    int32_t idistx, idisty;
-	    uint32_t ft, fb;
-
-	    tl = *u++;
-	    tr = *u++;
-	    bl = *u++;
-	    br = *u++;
-
-	    distx = *d++;
-	    disty = *d++;
+    if (repeat_mode != PIXMAN_REPEAT_NONE)
+    {
+	repeat (repeat_mode, width, &x1);
+	repeat (repeat_mode, height, &y1);
+	repeat (repeat_mode, width, &x2);
+	repeat (repeat_mode, height, &y2);
+	
+	tl = get_pixel (image, x1, y1, FALSE);
+	bl = get_pixel (image, x1, y2, FALSE);
+	tr = get_pixel (image, x2, y1, FALSE);
+	br = get_pixel (image, x2, y2, FALSE);
+    }
+    else
+    {
+	tl = get_pixel (image, x1, y1, TRUE);
+	tr = get_pixel (image, x2, y1, TRUE);
+	bl = get_pixel (image, x1, y2, TRUE);
+	br = get_pixel (image, x2, y2, TRUE);
+    }
 
-	    idistx = 256 - distx;
-	    idisty = 256 - disty;
+    idistx = 256 - distx;
+    idisty = 256 - disty;
 
 #define GET8(v, i)   ((uint16_t) (uint8_t) ((v) >> i))
-
-	    ft = GET8 (tl, 0) * idistx + GET8 (tr, 0) * distx;
-	    fb = GET8 (bl, 0) * idistx + GET8 (br, 0) * distx;
-	    r = (((ft * idisty + fb * disty) >> 16) & 0xff);
-	    ft = GET8 (tl, 8) * idistx + GET8 (tr, 8) * distx;
-	    fb = GET8 (bl, 8) * idistx + GET8 (br, 8) * distx;
-	    r |= (((ft * idisty + fb * disty) >> 8) & 0xff00);
-	    ft = GET8 (tl, 16) * idistx + GET8 (tr, 16) * distx;
-	    fb = GET8 (bl, 16) * idistx + GET8 (br, 16) * distx;
-	    r |= (((ft * idisty + fb * disty)) & 0xff0000);
-	    ft = GET8 (tl, 24) * idistx + GET8 (tr, 24) * distx;
-	    fb = GET8 (bl, 24) * idistx + GET8 (br, 24) * distx;
-	    r |= (((ft * idisty + fb * disty) << 8) & 0xff000000);
-
-	    buffer[i++] = r;
-	}
-    }
+    ft = GET8 (tl, 0) * idistx + GET8 (tr, 0) * distx;
+    fb = GET8 (bl, 0) * idistx + GET8 (br, 0) * distx;
+    r = (((ft * idisty + fb * disty) >> 16) & 0xff);
+    ft = GET8 (tl, 8) * idistx + GET8 (tr, 8) * distx;
+    fb = GET8 (bl, 8) * idistx + GET8 (br, 8) * distx;
+    r |= (((ft * idisty + fb * disty) >> 8) & 0xff00);
+    ft = GET8 (tl, 16) * idistx + GET8 (tr, 16) * distx;
+    fb = GET8 (bl, 16) * idistx + GET8 (br, 16) * distx;
+    r |= (((ft * idisty + fb * disty)) & 0xff0000);
+    ft = GET8 (tl, 24) * idistx + GET8 (tr, 24) * distx;
+    fb = GET8 (bl, 24) * idistx + GET8 (br, 24) * distx;
+    r |= (((ft * idisty + fb * disty) << 8) & 0xff000000);
+
+    return r;
 }
 
-/* Buffer contains list of fixed-point coordinates on input,
- * a list of pixels on output
- */
-static void
-bits_image_fetch_convolution_pixels (bits_image_t *image,
-                                     uint32_t *    buffer,
-                                     int           n_pixels)
+static force_inline uint32_t
+bits_image_fetch_pixel_convolution (bits_image_t   *image,
+				    pixman_fixed_t  x,
+				    pixman_fixed_t  y)
 {
-    uint32_t tmp_pixels_stack[N_TMP_PIXELS * 2]; /* Two coordinates per pixel */
-    uint32_t *tmp_pixels = tmp_pixels_stack;
     pixman_fixed_t *params = image->common.filter_params;
     int x_off = (params[0] - pixman_fixed_1) >> 1;
     int y_off = (params[1] - pixman_fixed_1) >> 1;
-    int n_tmp_pixels;
-    int32_t *coords;
-    int32_t *t;
-    uint32_t *u;
-    int i;
-    int max_n_kernels;
-
     int32_t cwidth = pixman_fixed_to_int (params[0]);
     int32_t cheight = pixman_fixed_to_int (params[1]);
-    int kernel_size = cwidth * cheight;
+    int32_t srtot, sgtot, sbtot, satot;
+    int32_t i, j, x1, x2, y1, y2;
+    pixman_repeat_t repeat_mode = image->common.repeat;
+    int width = image->width;
+    int height = image->height;
 
     params += 2;
 
-    n_tmp_pixels = N_TMP_PIXELS;
-    if (kernel_size > n_tmp_pixels)
-    {
-	/* Two coordinates per pixel */
-	tmp_pixels = malloc (kernel_size * 2 * sizeof (uint32_t));
-	n_tmp_pixels = kernel_size;
-
-	if (!tmp_pixels)
-	{
-	    /* We ignore out-of-memory during rendering */
-	    return;
-	}
-    }
+    x1 = pixman_fixed_to_int (x - pixman_fixed_e - x_off);
+    y1 = pixman_fixed_to_int (y - pixman_fixed_e - y_off);
+    x2 = x1 + cwidth;
+    y2 = y1 + cheight;
 
-    max_n_kernels = n_tmp_pixels / kernel_size;
+    srtot = sgtot = sbtot = satot = 0;
 
-    i = 0;
-    coords = (int32_t *)buffer;
-    while (i < n_pixels)
+    for (i = y1; i < y2; ++i)
     {
-	int n_kernels = MIN (max_n_kernels, (n_pixels - i));
-	pixman_repeat_t repeat_mode = image->common.repeat;
-	int width = image->width;
-	int height = image->height;
-	int j;
-
-	t = (int32_t *)tmp_pixels;
-	for (j = 0; j < n_kernels; ++j)
+	for (j = x1; j < x2; ++j)
 	{
-	    int32_t x, y, x1, x2, y1, y2;
+	    int rx = j;
+	    int ry = i;
 
-	    /* Subtract pixman_fixed_e to ensure that 0.5 rounds to 0, not 1 */
-	    x1 = pixman_fixed_to_int (coords[0] - pixman_fixed_e - x_off);
-	    y1 = pixman_fixed_to_int (coords[1] - pixman_fixed_e - y_off);
-	    x2 = x1 + cwidth;
-	    y2 = y1 + cheight;
+	    pixman_fixed_t f = *params;
 
-	    for (y = y1; y < y2; ++y)
+	    if (f)
 	    {
-		for (x = x1; x < x2; ++x)
-		{
-		    int rx = x;
-		    int ry = y;
+		uint32_t pixel;
 
-		    repeat (repeat_mode, width, height, &rx, &ry);
+		if (repeat_mode != PIXMAN_REPEAT_NONE)
+		{
+		    repeat (repeat_mode, width, &rx);
+		    repeat (repeat_mode, height, &ry);
 
-		    *t++ = rx;
-		    *t++ = ry;
+		    pixel = get_pixel (image, rx, ry, FALSE);
 		}
-	    }
-
-	    coords += 2;
-	}
-
-	bits_image_fetch_pixels_src_clip (image, tmp_pixels, n_kernels * kernel_size);
-
-	u = tmp_pixels;
-	for (j = 0; j < n_kernels; ++j)
-	{
-	    int32_t srtot, sgtot, sbtot, satot;
-	    pixman_fixed_t *p = params;
-	    int k;
-
-	    srtot = sgtot = sbtot = satot = 0;
-
-	    for (k = 0; k < kernel_size; ++k)
-	    {
-		pixman_fixed_t f = *p++;
-		if (f)
+		else
 		{
-		    uint32_t c = *u++;
-
-		    srtot += RED_8 (c) * f;
-		    sgtot += GREEN_8 (c) * f;
-		    sbtot += BLUE_8 (c) * f;
-		    satot += ALPHA_8 (c) * f;
+		    pixel = get_pixel (image, rx, ry, TRUE);
 		}
-	    }
-
-	    satot >>= 16;
-	    srtot >>= 16;
-	    sgtot >>= 16;
-	    sbtot >>= 16;
 
-	    satot = CLIP (satot, 0, 0xff);
-	    srtot = CLIP (srtot, 0, 0xff);
-	    sgtot = CLIP (sgtot, 0, 0xff);
-	    sbtot = CLIP (sbtot, 0, 0xff);
+		srtot += RED_8 (pixel) * f;
+		sgtot += GREEN_8 (pixel) * f;
+		sbtot += BLUE_8 (pixel) * f;
+		satot += ALPHA_8 (pixel) * f;
+	    }
 
-	    buffer[i++] = ((satot << 24) |
-	                   (srtot << 16) |
-	                   (sgtot <<  8) |
-	                   (sbtot       ));
+	    params++;
 	}
     }
 
-    if (tmp_pixels != tmp_pixels_stack)
-	free (tmp_pixels);
+    satot >>= 16;
+    srtot >>= 16;
+    sgtot >>= 16;
+    sbtot >>= 16;
+
+    satot = CLIP (satot, 0, 0xff);
+    srtot = CLIP (srtot, 0, 0xff);
+    sgtot = CLIP (sgtot, 0, 0xff);
+    sbtot = CLIP (sbtot, 0, 0xff);
+
+    return ((satot << 24) | (srtot << 16) | (sgtot <<  8) | (sbtot));
 }
 
-static void
-bits_image_fetch_filtered (bits_image_t *pict,
-                           uint32_t *    buffer,
-                           int           n_pixels)
+static force_inline uint32_t
+bits_image_fetch_pixel_filtered (bits_image_t *image,
+				 pixman_fixed_t x,
+				 pixman_fixed_t y)
 {
-    switch (pict->common.filter)
+    switch (image->common.filter)
     {
     case PIXMAN_FILTER_NEAREST:
     case PIXMAN_FILTER_FAST:
-	bits_image_fetch_nearest_pixels (pict, buffer, n_pixels);
+	return bits_image_fetch_pixel_nearest (image, x, y);
 	break;
 
     case PIXMAN_FILTER_BILINEAR:
     case PIXMAN_FILTER_GOOD:
     case PIXMAN_FILTER_BEST:
-	bits_image_fetch_bilinear_pixels (pict, buffer, n_pixels);
+	return bits_image_fetch_pixel_bilinear (image, x, y);
 	break;
 
     case PIXMAN_FILTER_CONVOLUTION:
-	bits_image_fetch_convolution_pixels (pict, buffer, n_pixels);
+	return bits_image_fetch_pixel_convolution (image, x, y);
 	break;
     }
+
+    return 0;
 }
 
 static void
-bits_image_fetch_transformed (pixman_image_t * pict,
-                              int              x,
-                              int              y,
+bits_image_fetch_transformed (pixman_image_t * image,
+                              int              offset,
+                              int              line,
                               int              width,
                               uint32_t *       buffer,
                               const uint32_t * mask,
                               uint32_t         mask_bits)
 {
-    pixman_bool_t affine = TRUE;
-    uint32_t tmp_buffer[2 * N_TMP_PIXELS];
-    pixman_vector_t unit;
+    pixman_fixed_t x, y, w;
+    pixman_fixed_t ux, uy, uw;
     pixman_vector_t v;
-    uint32_t *bits;
-    int32_t stride;
-    int32_t *coords;
     int i;
 
-    bits = pict->bits.bits;
-    stride = pict->bits.rowstride;
-
     /* reference point is the center of the pixel */
-    v.vector[0] = pixman_int_to_fixed (x) + pixman_fixed_1 / 2;
-    v.vector[1] = pixman_int_to_fixed (y) + pixman_fixed_1 / 2;
+    v.vector[0] = pixman_int_to_fixed (offset) + pixman_fixed_1 / 2;
+    v.vector[1] = pixman_int_to_fixed (line) + pixman_fixed_1 / 2;
     v.vector[2] = pixman_fixed_1;
 
     /* when using convolution filters or PIXMAN_REPEAT_PAD one
      * might get here without a transform */
-    if (pict->common.transform)
+    if (image->common.transform)
     {
-	if (!pixman_transform_point_3d (pict->common.transform, &v))
+	if (!pixman_transform_point_3d (image->common.transform, &v))
 	    return;
 
-	unit.vector[0] = pict->common.transform->matrix[0][0];
-	unit.vector[1] = pict->common.transform->matrix[1][0];
-	unit.vector[2] = pict->common.transform->matrix[2][0];
-
-	affine = (v.vector[2] == pixman_fixed_1 && unit.vector[2] == 0);
+	ux = image->common.transform->matrix[0][0];
+	uy = image->common.transform->matrix[1][0];
+	uw = image->common.transform->matrix[2][0];
     }
     else
     {
-	unit.vector[0] = pixman_fixed_1;
-	unit.vector[1] = 0;
-	unit.vector[2] = 0;
+	ux = pixman_fixed_1;
+	uy = 0;
+	uw = 0;
     }
 
-    i = 0;
-    while (i < width)
-    {
-	int n_pixels = MIN (N_TMP_PIXELS, width - i);
-	int j;
-
-	coords = (int32_t *)tmp_buffer;
+    x = v.vector[0];
+    y = v.vector[1];
+    w = v.vector[2];
 
-	for (j = 0; j < n_pixels; ++j)
+    if (w == pixman_fixed_1 && uw == 0) /* Affine */
+    {
+	for (i = 0; i < width; ++i)
 	{
-	    if (affine)
+	    if (!mask || (mask[i] & mask_bits))
 	    {
-		coords[0] = v.vector[0];
-		coords[1] = v.vector[1];
+		buffer[i] =
+		    bits_image_fetch_pixel_filtered (&image->bits, x, y);
 	    }
-	    else
-	    {
-		pixman_fixed_48_16_t div;
-
-		div = ((pixman_fixed_48_16_t)v.vector[0] << 16) / v.vector[2];
-
-		if ((div >> 16) > 0x7fff)
-		    coords[0] = 0x7fffffff;
-		else if ((div >> 16) < 0x8000)
-		    coords[0] = 0x80000000;
-		else
-		    coords[0] = div;
 
-		div = ((pixman_fixed_48_16_t)v.vector[1] << 16) / v.vector[2];
+	    x += ux;
+	    y += uy;
+	}
+    }
+    else
+    {
+	for (i = 0; i < width; ++i)
+	{
+	    pixman_fixed_t x0, y0;
 
-		if ((div >> 16) > 0x7fff)
-		    coords[1] = 0x7fffffff;
-		else if ((div >> 16) < 0x8000)
-		    coords[1] = 0x8000000;
-		else
-		    coords[1] = div;
+	    if (!mask || (mask[i] & mask_bits))
+	    {
+		x0 = ((pixman_fixed_48_16_t)x << 16) / w;
+		y0 = ((pixman_fixed_48_16_t)y << 16) / w;
 
-		v.vector[2] += unit.vector[2];
+		buffer[i] =
+		    bits_image_fetch_pixel_filtered (&image->bits, x0, y0);
 	    }
 
-	    coords += 2;
-
-	    v.vector[0] += unit.vector[0];
-	    v.vector[1] += unit.vector[1];
+	    x += ux;
+	    y += uy;
+	    w += uw;
 	}
-
-	bits_image_fetch_filtered (&pict->bits, tmp_buffer, n_pixels);
-
-	for (j = 0; j < n_pixels; ++j)
-	    buffer[i++] = tmp_buffer[j];
     }
 }
 
@@ -622,17 +430,14 @@ bits_image_fetch_solid_32 (pixman_image_t * image,
                            const uint32_t * mask,
                            uint32_t         mask_bits)
 {
-    uint32_t color[2];
+    uint32_t color;
     uint32_t *end;
 
-    color[0] = 0;
-    color[1] = 0;
-
-    image->bits.fetch_pixels_raw_32 (&image->bits, color, 1);
+    color = image->bits.fetch_pixel_raw_32 (&image->bits, 0, 0);
 
     end = buffer + width;
     while (buffer < end)
-	*(buffer++) = color[0];
+	*(buffer++) = color;
 }
 
 static void
@@ -645,15 +450,11 @@ bits_image_fetch_solid_64 (pixman_image_t * image,
                            uint32_t         unused2)
 {
     uint64_t color;
-    uint32_t *coords = (uint32_t *)&color;
     uint64_t *buffer = (uint64_t *)b;
     uint64_t *end;
 
-    coords[0] = 0;
-    coords[1] = 0;
-    
-    image->bits.fetch_pixels_raw_64 (&image->bits, (uint32_t *)&color, 1);
-    
+    color = image->bits.fetch_pixel_raw_64 (&image->bits, 0, 0);
+
     end = buffer + width;
     while (buffer < end)
 	*(buffer++) = color;
@@ -732,7 +533,7 @@ bits_image_fetch_untransformed_repeat_normal (bits_image_t *image,
 	    image->fetch_scanline_raw_64 ((pixman_image_t *)image, x, y, w, buffer, NULL, 0);
 	else
 	    image->fetch_scanline_raw_32 ((pixman_image_t *)image, x, y, w, buffer, NULL, 0);
-	
+
 	buffer += w * (wide? 2 : 1);
 	x += w;
 	width -= w;
@@ -837,12 +638,16 @@ bits_image_property_changed (pixman_image_t *image)
 
     _pixman_bits_image_setup_raw_accessors (bits);
 
+    image->bits.fetch_pixel_32 = image->bits.fetch_pixel_raw_32;
+
     if (bits->common.alpha_map)
     {
 	image->common.get_scanline_64 =
 	    _pixman_image_get_scanline_generic_64;
 	image->common.get_scanline_32 =
 	    bits_image_fetch_transformed;
+
+	image->bits.fetch_pixel_32 = bits_image_fetch_pixel_alpha;
     }
     else if ((bits->common.repeat != PIXMAN_REPEAT_NONE) &&
              bits->width == 1 &&
@@ -941,6 +746,7 @@ pixman_image_create_bits (pixman_format_code_t format,
     {
 	if (free_me)
 	    free (free_me);
+
 	return NULL;
     }
 
@@ -960,8 +766,6 @@ pixman_image_create_bits (pixman_format_code_t format,
 
     image->common.property_changed = bits_image_property_changed;
 
-    bits_image_property_changed (image);
-
     _pixman_image_reset_clip_region (image);
 
     return image;
diff --git a/pixman/pixman/pixman-combine.c.template b/pixman/pixman/pixman-combine.c.template
index 4a0e2bd06..c129980a8 100644
--- a/pixman/pixman/pixman-combine.c.template
+++ b/pixman/pixman/pixman-combine.c.template
@@ -78,7 +78,6 @@ combine_mask_alpha_ca (const comp4_t *src, comp4_t *mask)
 
     if (a == ~0)
     {
-	x = x >> A_SHIFT;
 	x |= x << G_SHIFT;
 	x |= x << R_SHIFT;
 	*(mask) = x;
@@ -1610,17 +1609,14 @@ combine_over_ca (pixman_implementation_t *imp,
 	combine_mask_ca (&s, &m);
 
 	a = ~m;
-	if (a != ~0)
+	if (a)
 	{
-	    if (a)
-	    {
-		comp4_t d = *(dest + i);
-		UNcx4_MUL_UNcx4_ADD_UNcx4 (d, a, s);
-		s = d;
-	    }
-
-	    *(dest + i) = s;
+	    comp4_t d = *(dest + i);
+	    UNcx4_MUL_UNcx4_ADD_UNcx4 (d, a, s);
+	    s = d;
 	}
+
+	*(dest + i) = s;
     }
 }
 
@@ -1644,10 +1640,8 @@ combine_over_reverse_ca (pixman_implementation_t *imp,
 	    comp4_t s = *(src + i);
 	    comp4_t m = *(mask + i);
 
-	    combine_mask_value_ca (&s, &m);
-
-	    if (a != MASK)
-		UNcx4_MUL_UNc_ADD_UNcx4 (s, a, d);
+	    UNcx4_MUL_UNcx4 (s, m);
+	    UNcx4_MUL_UNc_ADD_UNcx4 (s, a, d);
 
 	    *(dest + i) = s;
 	}
diff --git a/pixman/pixman/pixman-combine.h.template b/pixman/pixman/pixman-combine.h.template
index 2b4bb6045..2f6392f96 100644
--- a/pixman/pixman/pixman-combine.h.template
+++ b/pixman/pixman/pixman-combine.h.template
@@ -43,19 +43,56 @@
  */
 
 /*
+ * x_rb = (x_rb * a) / 255
+ */
+#define UNc_rb_MUL_UNc(x, a, t)						\
+    do									\
+    {									\
+	t  = ((x) & RB_MASK) * (a);					\
+	t += RB_ONE_HALF;						\
+	x = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;		\
+	x &= RB_MASK;							\
+    } while (0)
+
+/*
+ * x_rb = min (x_rb + y_rb, 255)
+ */
+#define UNc_rb_ADD_UNc_rb(x, y, t)					\
+    do									\
+    {									\
+	t = ((x) + (y));						\
+	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);		\
+	x = (t & RB_MASK);						\
+    } while (0)
+
+/*
+ * x_rb = (x_rb * a_rb) / 255
+ */
+#define UNc_rb_MUL_UNc_rb(x, a, t)					\
+    do									\
+    {									\
+	t  = (x & MASK) * (a & MASK);					\
+	t |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);			\
+	t += RB_ONE_HALF;						\
+	t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;		\
+	x = t & RB_MASK;						\
+    } while (0)
+
+/*
  * x_c = (x_c * a) / 255
  */
 #define UNcx4_MUL_UNc(x, a)						\
     do									\
     {									\
-	comp4_t t = ((x & RB_MASK) * a) + RB_ONE_HALF;                  \
-	t = (t + ((t >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	x = (((x >> COMPONENT_SIZE) & RB_MASK) * a) + RB_ONE_HALF;      \
-	x = (x + ((x >> COMPONENT_SIZE) & RB_MASK));                    \
-	x &= RB_MASK << COMPONENT_SIZE;                                 \
-	x += t;                                                         \
+	comp4_t r1, r2, t;						\
+									\
+	r1 = (x);							\
+	UNc_rb_MUL_UNc (r1, a, t);					\
+									\
+	r2 = (x) >> G_SHIFT;						\
+	UNc_rb_MUL_UNc (r2, a, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -64,33 +101,19 @@
 #define UNcx4_MUL_UNc_ADD_UNcx4(x, a, y)				\
     do									\
     {									\
-	/* multiply and divide: trunc((i + 128)*257/65536) */           \
-	comp4_t t = ((x & RB_MASK) * a) + RB_ONE_HALF;                  \
-	t = (t + ((t >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	/* add */                                                       \
-	t += y & RB_MASK;                                               \
-                                                                        \
-	/* saturate */                                                  \
-	t |= RB_MASK_PLUS_ONE - ((t >> COMPONENT_SIZE) & RB_MASK);      \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	/* multiply and divide */                                       \
-	x = (((x >> COMPONENT_SIZE) & RB_MASK) * a) + RB_ONE_HALF;      \
-	x = (x + ((x >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	x &= RB_MASK;                                                   \
-                                                                        \
-	/* add */                                                       \
-	x += (y >> COMPONENT_SIZE) & RB_MASK;                           \
-                                                                        \
-	/* saturate */                                                  \
-	x |= RB_MASK_PLUS_ONE - ((x >> COMPONENT_SIZE) & RB_MASK);      \
-	x &= RB_MASK;                                                   \
-                                                                        \
-	/* recombine */                                                 \
-	x <<= COMPONENT_SIZE;                                           \
-	x += t;                                                         \
+	comp4_t r1, r2, r3, t;						\
+									\
+	r1 = (x);							\
+	r2 = (y) & RB_MASK;						\
+	UNc_rb_MUL_UNc (r1, a, t);					\
+	UNc_rb_ADD_UNc_rb (r1, r2, t);					\
+									\
+	r2 = (x) >> G_SHIFT;						\
+	r3 = ((y) >> G_SHIFT) & RB_MASK;				\
+	UNc_rb_MUL_UNc (r2, a, t);					\
+	UNc_rb_ADD_UNc_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -99,32 +122,21 @@
 #define UNcx4_MUL_UNc_ADD_UNcx4_MUL_UNc(x, a, y, b)			\
     do									\
     {									\
-	comp4_t t;                                                      \
-	comp4_t r = (x >> A_SHIFT) * a + (y >> A_SHIFT) * b + ONE_HALF; \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-                                                                        \
-	t = (x & G_MASK) * a + (y & G_MASK) * b;                        \
-	t += (t >> G_SHIFT) + (ONE_HALF << G_SHIFT);                    \
-	t >>= R_SHIFT;                                                  \
-                                                                        \
-	t |= r << R_SHIFT;                                              \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	t <<= G_SHIFT;                                                  \
-                                                                        \
-	r = ((x >> R_SHIFT) & MASK) * a +                               \
-	    ((y >> R_SHIFT) & MASK) * b + ONE_HALF;                     \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-                                                                        \
-	x = (x & MASK) * a + (y & MASK) * b + ONE_HALF;                 \
-	x += (x >> G_SHIFT);                                            \
-	x >>= G_SHIFT;                                                  \
-	x |= r << R_SHIFT;                                              \
-	x |= RB_MASK_PLUS_ONE - ((x >> G_SHIFT) & RB_MASK);             \
-	x &= RB_MASK;                                                   \
-	x |= t;                                                         \
+	comp4_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = y;								\
+	UNc_rb_MUL_UNc (r1, a, t);					\
+	UNc_rb_MUL_UNc (r2, b, t);					\
+	UNc_rb_ADD_UNc_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT);						\
+	r3 = (y >> G_SHIFT);						\
+	UNc_rb_MUL_UNc (r2, a, t);					\
+	UNc_rb_MUL_UNc (r3, b, t);					\
+	UNc_rb_ADD_UNc_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -133,19 +145,17 @@
 #define UNcx4_MUL_UNcx4(x, a)						\
     do									\
     {									\
-	comp4_t t;                                                      \
-	comp4_t r = (x & MASK) * (a & MASK);                            \
-	r |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);                    \
-	r += RB_ONE_HALF;                                               \
-	r = (r + ((r >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	r &= RB_MASK;                                                   \
-                                                                        \
-	x >>= G_SHIFT;                                                  \
-	t = (x & MASK) * ((a >> G_SHIFT) & MASK);                       \
-	t |= (x & R_MASK) * (a >> A_SHIFT);                             \
-	t += RB_ONE_HALF;                                               \
-	t = t + ((t >> G_SHIFT) & RB_MASK);                             \
-	x = r | (t & AG_MASK);                                          \
+	comp4_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UNc_rb_MUL_UNc_rb (r1, r2, t);					\
+									\
+	r2 = x >> G_SHIFT;						\
+	r3 = a >> G_SHIFT;						\
+	UNc_rb_MUL_UNc_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -154,26 +164,21 @@
 #define UNcx4_MUL_UNcx4_ADD_UNcx4(x, a, y)				\
     do									\
     {									\
-	comp4_t t;                                                      \
-	comp4_t r = (x & MASK) * (a & MASK);                            \
-	r |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);                    \
-	r += RB_ONE_HALF;                                               \
-	r = (r + ((r >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	r &= RB_MASK;                                                   \
-	r += y & RB_MASK;                                               \
-	r |= RB_MASK_PLUS_ONE - ((r >> G_SHIFT) & RB_MASK);             \
-	r &= RB_MASK;                                                   \
-                                                                        \
-	x >>= G_SHIFT;                                                  \
-	t = (x & MASK) * ((a >> G_SHIFT) & MASK);                       \
-	t |= (x & R_MASK) * (a >> A_SHIFT);                             \
-	t += RB_ONE_HALF;                                               \
-	t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	t &= RB_MASK;                                                   \
-	t += (y >> G_SHIFT) & RB_MASK;                                  \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	x = r | (t << G_SHIFT);                                         \
+	comp4_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UNc_rb_MUL_UNc_rb (r1, r2, t);					\
+	r2 = y & RB_MASK;						\
+	UNc_rb_ADD_UNc_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT);						\
+	r3 = (a >> G_SHIFT);						\
+	UNc_rb_MUL_UNc_rb (r2, r3, t);					\
+	r3 = (y >> G_SHIFT) & RB_MASK;					\
+	UNc_rb_ADD_UNc_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -182,33 +187,23 @@
 #define UNcx4_MUL_UNcx4_ADD_UNcx4_MUL_UNc(x, a, y, b)			\
     do									\
     {									\
-	comp4_t t;                                                      \
-	comp4_t r = (x >> A_SHIFT) * (a >> A_SHIFT) +                   \
-	    (y >> A_SHIFT) * b;						\
-	r += (r >> G_SHIFT) + ONE_HALF;                                 \
-	r >>= G_SHIFT;                                                  \
-        								\
-	t = (x & G_MASK) * ((a >> G_SHIFT) & MASK) + (y & G_MASK) * b;  \
-	t += (t >> G_SHIFT) + (ONE_HALF << G_SHIFT);                    \
-	t >>= R_SHIFT;                                                  \
-        								\
-	t |= r << R_SHIFT;                                              \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	t <<= G_SHIFT;                                                  \
-									\
-	r = ((x >> R_SHIFT) & MASK) * ((a >> R_SHIFT) & MASK) +         \
-	    ((y >> R_SHIFT) & MASK) * b + ONE_HALF;                     \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-        								\
-	x = (x & MASK) * (a & MASK) + (y & MASK) * b + ONE_HALF;        \
-	x += (x >> G_SHIFT);                                            \
-	x >>= G_SHIFT;                                                  \
-	x |= r << R_SHIFT;                                              \
-	x |= RB_MASK_PLUS_ONE - ((x >> G_SHIFT) & RB_MASK);             \
-	x &= RB_MASK;                                                   \
-	x |= t;                                                         \
+	comp4_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UNc_rb_MUL_UNc_rb (r1, r2, t);					\
+	r2 = y;								\
+	UNc_rb_MUL_UNc (r2, b, t);					\
+	UNc_rb_ADD_UNc_rb (r1, r2, t);					\
+									\
+	r2 = x >> G_SHIFT;						\
+	r3 = a >> G_SHIFT;						\
+	UNc_rb_MUL_UNc_rb (r2, r3, t);					\
+	r3 = y >> G_SHIFT;						\
+	UNc_rb_MUL_UNc (r3, b, t);					\
+	UNc_rb_ADD_UNc_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -217,13 +212,15 @@
 #define UNcx4_ADD_UNcx4(x, y)						\
     do									\
     {									\
-	comp4_t t;                                                      \
-	comp4_t r = (x & RB_MASK) + (y & RB_MASK);                      \
-	r |= RB_MASK_PLUS_ONE - ((r >> G_SHIFT) & RB_MASK);             \
-	r &= RB_MASK;                                                   \
-        								\
-	t = ((x >> G_SHIFT) & RB_MASK) + ((y >> G_SHIFT) & RB_MASK);    \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	r |= (t & RB_MASK) << G_SHIFT;                                  \
-	x = r;                                                          \
+	comp4_t r1, r2, r3, t;						\
+									\
+	r1 = x & RB_MASK;						\
+	r2 = y & RB_MASK;						\
+	UNc_rb_ADD_UNc_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT) & RB_MASK;					\
+	r3 = (y >> G_SHIFT) & RB_MASK;					\
+	UNc_rb_ADD_UNc_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
diff --git a/pixman/pixman/pixman-combine32.c b/pixman/pixman/pixman-combine32.c
index b0a2a8011..ab145e405 100644
--- a/pixman/pixman/pixman-combine32.c
+++ b/pixman/pixman/pixman-combine32.c
@@ -82,7 +82,6 @@ combine_mask_alpha_ca (const uint32_t *src, uint32_t *mask)
 
     if (a == ~0)
     {
-	x = x >> A_SHIFT;
 	x |= x << G_SHIFT;
 	x |= x << R_SHIFT;
 	*(mask) = x;
@@ -1614,17 +1613,14 @@ combine_over_ca (pixman_implementation_t *imp,
 	combine_mask_ca (&s, &m);
 
 	a = ~m;
-	if (a != ~0)
+	if (a)
 	{
-	    if (a)
-	    {
-		uint32_t d = *(dest + i);
-		UN8x4_MUL_UN8x4_ADD_UN8x4 (d, a, s);
-		s = d;
-	    }
-
-	    *(dest + i) = s;
+	    uint32_t d = *(dest + i);
+	    UN8x4_MUL_UN8x4_ADD_UN8x4 (d, a, s);
+	    s = d;
 	}
+
+	*(dest + i) = s;
     }
 }
 
@@ -1648,10 +1644,8 @@ combine_over_reverse_ca (pixman_implementation_t *imp,
 	    uint32_t s = *(src + i);
 	    uint32_t m = *(mask + i);
 
-	    combine_mask_value_ca (&s, &m);
-
-	    if (a != MASK)
-		UN8x4_MUL_UN8_ADD_UN8x4 (s, a, d);
+	    UN8x4_MUL_UN8x4 (s, m);
+	    UN8x4_MUL_UN8_ADD_UN8x4 (s, a, d);
 
 	    *(dest + i) = s;
 	}
diff --git a/pixman/pixman/pixman-combine32.h b/pixman/pixman/pixman-combine32.h
index 9a2875e12..4c2f4cdf0 100644
--- a/pixman/pixman/pixman-combine32.h
+++ b/pixman/pixman/pixman-combine32.h
@@ -47,19 +47,56 @@
  */
 
 /*
+ * x_rb = (x_rb * a) / 255
+ */
+#define UN8_rb_MUL_UN8(x, a, t)						\
+    do									\
+    {									\
+	t  = ((x) & RB_MASK) * (a);					\
+	t += RB_ONE_HALF;						\
+	x = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;		\
+	x &= RB_MASK;							\
+    } while (0)
+
+/*
+ * x_rb = min (x_rb + y_rb, 255)
+ */
+#define UN8_rb_ADD_UN8_rb(x, y, t)					\
+    do									\
+    {									\
+	t = ((x) + (y));						\
+	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);		\
+	x = (t & RB_MASK);						\
+    } while (0)
+
+/*
+ * x_rb = (x_rb * a_rb) / 255
+ */
+#define UN8_rb_MUL_UN8_rb(x, a, t)					\
+    do									\
+    {									\
+	t  = (x & MASK) * (a & MASK);					\
+	t |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);			\
+	t += RB_ONE_HALF;						\
+	t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;		\
+	x = t & RB_MASK;						\
+    } while (0)
+
+/*
  * x_c = (x_c * a) / 255
  */
 #define UN8x4_MUL_UN8(x, a)						\
     do									\
     {									\
-	uint32_t t = ((x & RB_MASK) * a) + RB_ONE_HALF;                  \
-	t = (t + ((t >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	x = (((x >> COMPONENT_SIZE) & RB_MASK) * a) + RB_ONE_HALF;      \
-	x = (x + ((x >> COMPONENT_SIZE) & RB_MASK));                    \
-	x &= RB_MASK << COMPONENT_SIZE;                                 \
-	x += t;                                                         \
+	uint32_t r1, r2, t;						\
+									\
+	r1 = (x);							\
+	UN8_rb_MUL_UN8 (r1, a, t);					\
+									\
+	r2 = (x) >> G_SHIFT;						\
+	UN8_rb_MUL_UN8 (r2, a, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -68,33 +105,19 @@
 #define UN8x4_MUL_UN8_ADD_UN8x4(x, a, y)				\
     do									\
     {									\
-	/* multiply and divide: trunc((i + 128)*257/65536) */           \
-	uint32_t t = ((x & RB_MASK) * a) + RB_ONE_HALF;                  \
-	t = (t + ((t >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	/* add */                                                       \
-	t += y & RB_MASK;                                               \
-                                                                        \
-	/* saturate */                                                  \
-	t |= RB_MASK_PLUS_ONE - ((t >> COMPONENT_SIZE) & RB_MASK);      \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	/* multiply and divide */                                       \
-	x = (((x >> COMPONENT_SIZE) & RB_MASK) * a) + RB_ONE_HALF;      \
-	x = (x + ((x >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	x &= RB_MASK;                                                   \
-                                                                        \
-	/* add */                                                       \
-	x += (y >> COMPONENT_SIZE) & RB_MASK;                           \
-                                                                        \
-	/* saturate */                                                  \
-	x |= RB_MASK_PLUS_ONE - ((x >> COMPONENT_SIZE) & RB_MASK);      \
-	x &= RB_MASK;                                                   \
-                                                                        \
-	/* recombine */                                                 \
-	x <<= COMPONENT_SIZE;                                           \
-	x += t;                                                         \
+	uint32_t r1, r2, r3, t;						\
+									\
+	r1 = (x);							\
+	r2 = (y) & RB_MASK;						\
+	UN8_rb_MUL_UN8 (r1, a, t);					\
+	UN8_rb_ADD_UN8_rb (r1, r2, t);					\
+									\
+	r2 = (x) >> G_SHIFT;						\
+	r3 = ((y) >> G_SHIFT) & RB_MASK;				\
+	UN8_rb_MUL_UN8 (r2, a, t);					\
+	UN8_rb_ADD_UN8_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -103,32 +126,21 @@
 #define UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8(x, a, y, b)			\
     do									\
     {									\
-	uint32_t t;                                                      \
-	uint32_t r = (x >> A_SHIFT) * a + (y >> A_SHIFT) * b + ONE_HALF; \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-                                                                        \
-	t = (x & G_MASK) * a + (y & G_MASK) * b;                        \
-	t += (t >> G_SHIFT) + (ONE_HALF << G_SHIFT);                    \
-	t >>= R_SHIFT;                                                  \
-                                                                        \
-	t |= r << R_SHIFT;                                              \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	t <<= G_SHIFT;                                                  \
-                                                                        \
-	r = ((x >> R_SHIFT) & MASK) * a +                               \
-	    ((y >> R_SHIFT) & MASK) * b + ONE_HALF;                     \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-                                                                        \
-	x = (x & MASK) * a + (y & MASK) * b + ONE_HALF;                 \
-	x += (x >> G_SHIFT);                                            \
-	x >>= G_SHIFT;                                                  \
-	x |= r << R_SHIFT;                                              \
-	x |= RB_MASK_PLUS_ONE - ((x >> G_SHIFT) & RB_MASK);             \
-	x &= RB_MASK;                                                   \
-	x |= t;                                                         \
+	uint32_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = y;								\
+	UN8_rb_MUL_UN8 (r1, a, t);					\
+	UN8_rb_MUL_UN8 (r2, b, t);					\
+	UN8_rb_ADD_UN8_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT);						\
+	r3 = (y >> G_SHIFT);						\
+	UN8_rb_MUL_UN8 (r2, a, t);					\
+	UN8_rb_MUL_UN8 (r3, b, t);					\
+	UN8_rb_ADD_UN8_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -137,19 +149,17 @@
 #define UN8x4_MUL_UN8x4(x, a)						\
     do									\
     {									\
-	uint32_t t;                                                      \
-	uint32_t r = (x & MASK) * (a & MASK);                            \
-	r |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);                    \
-	r += RB_ONE_HALF;                                               \
-	r = (r + ((r >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	r &= RB_MASK;                                                   \
-                                                                        \
-	x >>= G_SHIFT;                                                  \
-	t = (x & MASK) * ((a >> G_SHIFT) & MASK);                       \
-	t |= (x & R_MASK) * (a >> A_SHIFT);                             \
-	t += RB_ONE_HALF;                                               \
-	t = t + ((t >> G_SHIFT) & RB_MASK);                             \
-	x = r | (t & AG_MASK);                                          \
+	uint32_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UN8_rb_MUL_UN8_rb (r1, r2, t);					\
+									\
+	r2 = x >> G_SHIFT;						\
+	r3 = a >> G_SHIFT;						\
+	UN8_rb_MUL_UN8_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -158,26 +168,21 @@
 #define UN8x4_MUL_UN8x4_ADD_UN8x4(x, a, y)				\
     do									\
     {									\
-	uint32_t t;                                                      \
-	uint32_t r = (x & MASK) * (a & MASK);                            \
-	r |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);                    \
-	r += RB_ONE_HALF;                                               \
-	r = (r + ((r >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	r &= RB_MASK;                                                   \
-	r += y & RB_MASK;                                               \
-	r |= RB_MASK_PLUS_ONE - ((r >> G_SHIFT) & RB_MASK);             \
-	r &= RB_MASK;                                                   \
-                                                                        \
-	x >>= G_SHIFT;                                                  \
-	t = (x & MASK) * ((a >> G_SHIFT) & MASK);                       \
-	t |= (x & R_MASK) * (a >> A_SHIFT);                             \
-	t += RB_ONE_HALF;                                               \
-	t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	t &= RB_MASK;                                                   \
-	t += (y >> G_SHIFT) & RB_MASK;                                  \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	x = r | (t << G_SHIFT);                                         \
+	uint32_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UN8_rb_MUL_UN8_rb (r1, r2, t);					\
+	r2 = y & RB_MASK;						\
+	UN8_rb_ADD_UN8_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT);						\
+	r3 = (a >> G_SHIFT);						\
+	UN8_rb_MUL_UN8_rb (r2, r3, t);					\
+	r3 = (y >> G_SHIFT) & RB_MASK;					\
+	UN8_rb_ADD_UN8_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -186,33 +191,23 @@
 #define UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8(x, a, y, b)			\
     do									\
     {									\
-	uint32_t t;                                                      \
-	uint32_t r = (x >> A_SHIFT) * (a >> A_SHIFT) +                   \
-	    (y >> A_SHIFT) * b;						\
-	r += (r >> G_SHIFT) + ONE_HALF;                                 \
-	r >>= G_SHIFT;                                                  \
-        								\
-	t = (x & G_MASK) * ((a >> G_SHIFT) & MASK) + (y & G_MASK) * b;  \
-	t += (t >> G_SHIFT) + (ONE_HALF << G_SHIFT);                    \
-	t >>= R_SHIFT;                                                  \
-        								\
-	t |= r << R_SHIFT;                                              \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	t <<= G_SHIFT;                                                  \
-									\
-	r = ((x >> R_SHIFT) & MASK) * ((a >> R_SHIFT) & MASK) +         \
-	    ((y >> R_SHIFT) & MASK) * b + ONE_HALF;                     \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-        								\
-	x = (x & MASK) * (a & MASK) + (y & MASK) * b + ONE_HALF;        \
-	x += (x >> G_SHIFT);                                            \
-	x >>= G_SHIFT;                                                  \
-	x |= r << R_SHIFT;                                              \
-	x |= RB_MASK_PLUS_ONE - ((x >> G_SHIFT) & RB_MASK);             \
-	x &= RB_MASK;                                                   \
-	x |= t;                                                         \
+	uint32_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UN8_rb_MUL_UN8_rb (r1, r2, t);					\
+	r2 = y;								\
+	UN8_rb_MUL_UN8 (r2, b, t);					\
+	UN8_rb_ADD_UN8_rb (r1, r2, t);					\
+									\
+	r2 = x >> G_SHIFT;						\
+	r3 = a >> G_SHIFT;						\
+	UN8_rb_MUL_UN8_rb (r2, r3, t);					\
+	r3 = y >> G_SHIFT;						\
+	UN8_rb_MUL_UN8 (r3, b, t);					\
+	UN8_rb_ADD_UN8_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -221,13 +216,15 @@
 #define UN8x4_ADD_UN8x4(x, y)						\
     do									\
     {									\
-	uint32_t t;                                                      \
-	uint32_t r = (x & RB_MASK) + (y & RB_MASK);                      \
-	r |= RB_MASK_PLUS_ONE - ((r >> G_SHIFT) & RB_MASK);             \
-	r &= RB_MASK;                                                   \
-        								\
-	t = ((x >> G_SHIFT) & RB_MASK) + ((y >> G_SHIFT) & RB_MASK);    \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	r |= (t & RB_MASK) << G_SHIFT;                                  \
-	x = r;                                                          \
+	uint32_t r1, r2, r3, t;						\
+									\
+	r1 = x & RB_MASK;						\
+	r2 = y & RB_MASK;						\
+	UN8_rb_ADD_UN8_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT) & RB_MASK;					\
+	r3 = (y >> G_SHIFT) & RB_MASK;					\
+	UN8_rb_ADD_UN8_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
diff --git a/pixman/pixman/pixman-combine64.c b/pixman/pixman/pixman-combine64.c
index 5c9803319..03e271b95 100644
--- a/pixman/pixman/pixman-combine64.c
+++ b/pixman/pixman/pixman-combine64.c
@@ -82,7 +82,6 @@ combine_mask_alpha_ca (const uint64_t *src, uint64_t *mask)
 
     if (a == ~0)
     {
-	x = x >> A_SHIFT;
 	x |= x << G_SHIFT;
 	x |= x << R_SHIFT;
 	*(mask) = x;
@@ -1614,17 +1613,14 @@ combine_over_ca (pixman_implementation_t *imp,
 	combine_mask_ca (&s, &m);
 
 	a = ~m;
-	if (a != ~0)
+	if (a)
 	{
-	    if (a)
-	    {
-		uint64_t d = *(dest + i);
-		UN16x4_MUL_UN16x4_ADD_UN16x4 (d, a, s);
-		s = d;
-	    }
-
-	    *(dest + i) = s;
+	    uint64_t d = *(dest + i);
+	    UN16x4_MUL_UN16x4_ADD_UN16x4 (d, a, s);
+	    s = d;
 	}
+
+	*(dest + i) = s;
     }
 }
 
@@ -1648,10 +1644,8 @@ combine_over_reverse_ca (pixman_implementation_t *imp,
 	    uint64_t s = *(src + i);
 	    uint64_t m = *(mask + i);
 
-	    combine_mask_value_ca (&s, &m);
-
-	    if (a != MASK)
-		UN16x4_MUL_UN16_ADD_UN16x4 (s, a, d);
+	    UN16x4_MUL_UN16x4 (s, m);
+	    UN16x4_MUL_UN16_ADD_UN16x4 (s, a, d);
 
 	    *(dest + i) = s;
 	}
diff --git a/pixman/pixman/pixman-combine64.h b/pixman/pixman/pixman-combine64.h
index e5ecef3a1..bb222a4d7 100644
--- a/pixman/pixman/pixman-combine64.h
+++ b/pixman/pixman/pixman-combine64.h
@@ -47,19 +47,56 @@
  */
 
 /*
+ * x_rb = (x_rb * a) / 255
+ */
+#define UN16_rb_MUL_UN16(x, a, t)						\
+    do									\
+    {									\
+	t  = ((x) & RB_MASK) * (a);					\
+	t += RB_ONE_HALF;						\
+	x = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;		\
+	x &= RB_MASK;							\
+    } while (0)
+
+/*
+ * x_rb = min (x_rb + y_rb, 255)
+ */
+#define UN16_rb_ADD_UN16_rb(x, y, t)					\
+    do									\
+    {									\
+	t = ((x) + (y));						\
+	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);		\
+	x = (t & RB_MASK);						\
+    } while (0)
+
+/*
+ * x_rb = (x_rb * a_rb) / 255
+ */
+#define UN16_rb_MUL_UN16_rb(x, a, t)					\
+    do									\
+    {									\
+	t  = (x & MASK) * (a & MASK);					\
+	t |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);			\
+	t += RB_ONE_HALF;						\
+	t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;		\
+	x = t & RB_MASK;						\
+    } while (0)
+
+/*
  * x_c = (x_c * a) / 255
  */
 #define UN16x4_MUL_UN16(x, a)						\
     do									\
     {									\
-	uint64_t t = ((x & RB_MASK) * a) + RB_ONE_HALF;                  \
-	t = (t + ((t >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	x = (((x >> COMPONENT_SIZE) & RB_MASK) * a) + RB_ONE_HALF;      \
-	x = (x + ((x >> COMPONENT_SIZE) & RB_MASK));                    \
-	x &= RB_MASK << COMPONENT_SIZE;                                 \
-	x += t;                                                         \
+	uint64_t r1, r2, t;						\
+									\
+	r1 = (x);							\
+	UN16_rb_MUL_UN16 (r1, a, t);					\
+									\
+	r2 = (x) >> G_SHIFT;						\
+	UN16_rb_MUL_UN16 (r2, a, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -68,33 +105,19 @@
 #define UN16x4_MUL_UN16_ADD_UN16x4(x, a, y)				\
     do									\
     {									\
-	/* multiply and divide: trunc((i + 128)*257/65536) */           \
-	uint64_t t = ((x & RB_MASK) * a) + RB_ONE_HALF;                  \
-	t = (t + ((t >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	/* add */                                                       \
-	t += y & RB_MASK;                                               \
-                                                                        \
-	/* saturate */                                                  \
-	t |= RB_MASK_PLUS_ONE - ((t >> COMPONENT_SIZE) & RB_MASK);      \
-	t &= RB_MASK;                                                   \
-                                                                        \
-	/* multiply and divide */                                       \
-	x = (((x >> COMPONENT_SIZE) & RB_MASK) * a) + RB_ONE_HALF;      \
-	x = (x + ((x >> COMPONENT_SIZE) & RB_MASK)) >> COMPONENT_SIZE;  \
-	x &= RB_MASK;                                                   \
-                                                                        \
-	/* add */                                                       \
-	x += (y >> COMPONENT_SIZE) & RB_MASK;                           \
-                                                                        \
-	/* saturate */                                                  \
-	x |= RB_MASK_PLUS_ONE - ((x >> COMPONENT_SIZE) & RB_MASK);      \
-	x &= RB_MASK;                                                   \
-                                                                        \
-	/* recombine */                                                 \
-	x <<= COMPONENT_SIZE;                                           \
-	x += t;                                                         \
+	uint64_t r1, r2, r3, t;						\
+									\
+	r1 = (x);							\
+	r2 = (y) & RB_MASK;						\
+	UN16_rb_MUL_UN16 (r1, a, t);					\
+	UN16_rb_ADD_UN16_rb (r1, r2, t);					\
+									\
+	r2 = (x) >> G_SHIFT;						\
+	r3 = ((y) >> G_SHIFT) & RB_MASK;				\
+	UN16_rb_MUL_UN16 (r2, a, t);					\
+	UN16_rb_ADD_UN16_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -103,32 +126,21 @@
 #define UN16x4_MUL_UN16_ADD_UN16x4_MUL_UN16(x, a, y, b)			\
     do									\
     {									\
-	uint64_t t;                                                      \
-	uint64_t r = (x >> A_SHIFT) * a + (y >> A_SHIFT) * b + ONE_HALF; \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-                                                                        \
-	t = (x & G_MASK) * a + (y & G_MASK) * b;                        \
-	t += (t >> G_SHIFT) + (ONE_HALF << G_SHIFT);                    \
-	t >>= R_SHIFT;                                                  \
-                                                                        \
-	t |= r << R_SHIFT;                                              \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	t <<= G_SHIFT;                                                  \
-                                                                        \
-	r = ((x >> R_SHIFT) & MASK) * a +                               \
-	    ((y >> R_SHIFT) & MASK) * b + ONE_HALF;                     \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-                                                                        \
-	x = (x & MASK) * a + (y & MASK) * b + ONE_HALF;                 \
-	x += (x >> G_SHIFT);                                            \
-	x >>= G_SHIFT;                                                  \
-	x |= r << R_SHIFT;                                              \
-	x |= RB_MASK_PLUS_ONE - ((x >> G_SHIFT) & RB_MASK);             \
-	x &= RB_MASK;                                                   \
-	x |= t;                                                         \
+	uint64_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = y;								\
+	UN16_rb_MUL_UN16 (r1, a, t);					\
+	UN16_rb_MUL_UN16 (r2, b, t);					\
+	UN16_rb_ADD_UN16_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT);						\
+	r3 = (y >> G_SHIFT);						\
+	UN16_rb_MUL_UN16 (r2, a, t);					\
+	UN16_rb_MUL_UN16 (r3, b, t);					\
+	UN16_rb_ADD_UN16_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -137,19 +149,17 @@
 #define UN16x4_MUL_UN16x4(x, a)						\
     do									\
     {									\
-	uint64_t t;                                                      \
-	uint64_t r = (x & MASK) * (a & MASK);                            \
-	r |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);                    \
-	r += RB_ONE_HALF;                                               \
-	r = (r + ((r >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	r &= RB_MASK;                                                   \
-                                                                        \
-	x >>= G_SHIFT;                                                  \
-	t = (x & MASK) * ((a >> G_SHIFT) & MASK);                       \
-	t |= (x & R_MASK) * (a >> A_SHIFT);                             \
-	t += RB_ONE_HALF;                                               \
-	t = t + ((t >> G_SHIFT) & RB_MASK);                             \
-	x = r | (t & AG_MASK);                                          \
+	uint64_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UN16_rb_MUL_UN16_rb (r1, r2, t);					\
+									\
+	r2 = x >> G_SHIFT;						\
+	r3 = a >> G_SHIFT;						\
+	UN16_rb_MUL_UN16_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -158,26 +168,21 @@
 #define UN16x4_MUL_UN16x4_ADD_UN16x4(x, a, y)				\
     do									\
     {									\
-	uint64_t t;                                                      \
-	uint64_t r = (x & MASK) * (a & MASK);                            \
-	r |= (x & R_MASK) * ((a >> R_SHIFT) & MASK);                    \
-	r += RB_ONE_HALF;                                               \
-	r = (r + ((r >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	r &= RB_MASK;                                                   \
-	r += y & RB_MASK;                                               \
-	r |= RB_MASK_PLUS_ONE - ((r >> G_SHIFT) & RB_MASK);             \
-	r &= RB_MASK;                                                   \
-                                                                        \
-	x >>= G_SHIFT;                                                  \
-	t = (x & MASK) * ((a >> G_SHIFT) & MASK);                       \
-	t |= (x & R_MASK) * (a >> A_SHIFT);                             \
-	t += RB_ONE_HALF;                                               \
-	t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT;                \
-	t &= RB_MASK;                                                   \
-	t += (y >> G_SHIFT) & RB_MASK;                                  \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	x = r | (t << G_SHIFT);                                         \
+	uint64_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UN16_rb_MUL_UN16_rb (r1, r2, t);					\
+	r2 = y & RB_MASK;						\
+	UN16_rb_ADD_UN16_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT);						\
+	r3 = (a >> G_SHIFT);						\
+	UN16_rb_MUL_UN16_rb (r2, r3, t);					\
+	r3 = (y >> G_SHIFT) & RB_MASK;					\
+	UN16_rb_ADD_UN16_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -186,33 +191,23 @@
 #define UN16x4_MUL_UN16x4_ADD_UN16x4_MUL_UN16(x, a, y, b)			\
     do									\
     {									\
-	uint64_t t;                                                      \
-	uint64_t r = (x >> A_SHIFT) * (a >> A_SHIFT) +                   \
-	    (y >> A_SHIFT) * b;						\
-	r += (r >> G_SHIFT) + ONE_HALF;                                 \
-	r >>= G_SHIFT;                                                  \
-        								\
-	t = (x & G_MASK) * ((a >> G_SHIFT) & MASK) + (y & G_MASK) * b;  \
-	t += (t >> G_SHIFT) + (ONE_HALF << G_SHIFT);                    \
-	t >>= R_SHIFT;                                                  \
-        								\
-	t |= r << R_SHIFT;                                              \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	t &= RB_MASK;                                                   \
-	t <<= G_SHIFT;                                                  \
-									\
-	r = ((x >> R_SHIFT) & MASK) * ((a >> R_SHIFT) & MASK) +         \
-	    ((y >> R_SHIFT) & MASK) * b + ONE_HALF;                     \
-	r += (r >> G_SHIFT);                                            \
-	r >>= G_SHIFT;                                                  \
-        								\
-	x = (x & MASK) * (a & MASK) + (y & MASK) * b + ONE_HALF;        \
-	x += (x >> G_SHIFT);                                            \
-	x >>= G_SHIFT;                                                  \
-	x |= r << R_SHIFT;                                              \
-	x |= RB_MASK_PLUS_ONE - ((x >> G_SHIFT) & RB_MASK);             \
-	x &= RB_MASK;                                                   \
-	x |= t;                                                         \
+	uint64_t r1, r2, r3, t;						\
+									\
+	r1 = x;								\
+	r2 = a;								\
+	UN16_rb_MUL_UN16_rb (r1, r2, t);					\
+	r2 = y;								\
+	UN16_rb_MUL_UN16 (r2, b, t);					\
+	UN16_rb_ADD_UN16_rb (r1, r2, t);					\
+									\
+	r2 = x >> G_SHIFT;						\
+	r3 = a >> G_SHIFT;						\
+	UN16_rb_MUL_UN16_rb (r2, r3, t);					\
+	r3 = y >> G_SHIFT;						\
+	UN16_rb_MUL_UN16 (r3, b, t);					\
+	UN16_rb_ADD_UN16_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
 
 /*
@@ -221,13 +216,15 @@
 #define UN16x4_ADD_UN16x4(x, y)						\
     do									\
     {									\
-	uint64_t t;                                                      \
-	uint64_t r = (x & RB_MASK) + (y & RB_MASK);                      \
-	r |= RB_MASK_PLUS_ONE - ((r >> G_SHIFT) & RB_MASK);             \
-	r &= RB_MASK;                                                   \
-        								\
-	t = ((x >> G_SHIFT) & RB_MASK) + ((y >> G_SHIFT) & RB_MASK);    \
-	t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK);             \
-	r |= (t & RB_MASK) << G_SHIFT;                                  \
-	x = r;                                                          \
+	uint64_t r1, r2, r3, t;						\
+									\
+	r1 = x & RB_MASK;						\
+	r2 = y & RB_MASK;						\
+	UN16_rb_ADD_UN16_rb (r1, r2, t);					\
+									\
+	r2 = (x >> G_SHIFT) & RB_MASK;					\
+	r3 = (y >> G_SHIFT) & RB_MASK;					\
+	UN16_rb_ADD_UN16_rb (r2, r3, t);					\
+									\
+	x = r1 | (r2 << G_SHIFT);					\
     } while (0)
diff --git a/pixman/pixman/pixman-conical-gradient.c b/pixman/pixman/pixman-conical-gradient.c
index 6a4e31ebf..d720db3d4 100644
--- a/pixman/pixman/pixman-conical-gradient.c
+++ b/pixman/pixman/pixman-conical-gradient.c
@@ -175,8 +175,6 @@ pixman_image_create_conical_gradient (pixman_point_fixed_t *        center,
 
     image->common.property_changed = conical_gradient_property_changed;
 
-    conical_gradient_property_changed (image);
-
     return image;
 }
 
diff --git a/pixman/pixman/pixman-fast-path.c b/pixman/pixman/pixman-fast-path.c
index d2ce26fe3..7f805780f 100644
--- a/pixman/pixman/pixman-fast-path.c
+++ b/pixman/pixman/pixman-fast-path.c
@@ -348,6 +348,67 @@ fast_composite_over_n_8_8888 (pixman_implementation_t *imp,
 }
 
 static void
+fast_composite_add_n_8888_8888_ca (pixman_implementation_t *imp,
+				   pixman_op_t              op,
+				   pixman_image_t *         src_image,
+				   pixman_image_t *         mask_image,
+				   pixman_image_t *         dst_image,
+				   int32_t                  src_x,
+				   int32_t                  src_y,
+				   int32_t                  mask_x,
+				   int32_t                  mask_y,
+				   int32_t                  dest_x,
+				   int32_t                  dest_y,
+				   int32_t                  width,
+				   int32_t                  height)
+{
+    uint32_t src, srca, s;
+    uint32_t    *dst_line, *dst, d;
+    uint32_t    *mask_line, *mask, ma;
+    int dst_stride, mask_stride;
+    uint16_t w;
+
+    src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+    srca = src >> 24;
+    if (src == 0)
+	return;
+
+    PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+    PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+
+    while (height--)
+    {
+	dst = dst_line;
+	dst_line += dst_stride;
+	mask = mask_line;
+	mask_line += mask_stride;
+	w = width;
+
+	while (w--)
+	{
+	    ma = *mask++;
+
+	    if (ma == 0xffffffff && srca == 0xff)
+	    {
+		*dst = src;
+	    }
+	    else if (ma)
+	    {
+		d = *dst;
+		s = src;
+		
+		UN8x4_MUL_UN8x4_ADD_UN8x4 (s, ma, d);
+
+		*dst = s;
+	    }
+
+	    dst++;
+	}
+    }
+}
+
+static void
 fast_composite_over_n_8888_8888_ca (pixman_implementation_t *imp,
                                     pixman_op_t              op,
                                     pixman_image_t *         src_image,
@@ -362,7 +423,7 @@ fast_composite_over_n_8888_8888_ca (pixman_implementation_t *imp,
                                     int32_t                  width,
                                     int32_t                  height)
 {
-    uint32_t src, srca;
+    uint32_t src, srca, s;
     uint32_t    *dst_line, *dst, d;
     uint32_t    *mask_line, *mask, ma;
     int dst_stride, mask_stride;
@@ -398,11 +459,12 @@ fast_composite_over_n_8888_8888_ca (pixman_implementation_t *imp,
 	    else if (ma)
 	    {
 		d = *dst;
+		s = src;
 
-		UN8x4_MUL_UN8x4 (src, ma);
+		UN8x4_MUL_UN8x4 (s, ma);
 		UN8x4_MUL_UN8 (ma, srca);
 		ma = ~ma;
-		UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ma, src);
+		UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ma, s);
 
 		*dst = d;
 	    }
@@ -558,11 +620,11 @@ fast_composite_over_n_8888_0565_ca (pixman_implementation_t *imp,
                                     int32_t                  width,
                                     int32_t                  height)
 {
-    uint32_t src, srca;
-    uint16_t src16;
-    uint16_t    *dst_line, *dst;
-    uint32_t d;
-    uint32_t    *mask_line, *mask, ma;
+    uint32_t  src, srca, s;
+    uint16_t  src16;
+    uint16_t *dst_line, *dst;
+    uint32_t  d;
+    uint32_t *mask_line, *mask, ma;
     int dst_stride, mask_stride;
     uint16_t w;
 
@@ -606,10 +668,12 @@ fast_composite_over_n_8888_0565_ca (pixman_implementation_t *imp,
 		d = *dst;
 		d = CONVERT_0565_TO_0888 (d);
 
-		UN8x4_MUL_UN8x4 (src, ma);
+		s = src;
+
+		UN8x4_MUL_UN8x4 (s, ma);
 		UN8x4_MUL_UN8 (ma, srca);
 		ma = ~ma;
-		UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ma, src);
+		UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ma, s);
 
 		*dst = CONVERT_8888_TO_0565 (d);
 	    }
@@ -1064,6 +1128,7 @@ static const pixman_fast_path_t c_fast_paths[] =
     { PIXMAN_OP_ADD, PIXMAN_a8r8g8b8,  PIXMAN_null,     PIXMAN_a8r8g8b8, fast_composite_add_8888_8888,   0 },
     { PIXMAN_OP_ADD, PIXMAN_a8b8g8r8,  PIXMAN_null,     PIXMAN_a8b8g8r8, fast_composite_add_8888_8888,   0 },
     { PIXMAN_OP_ADD, PIXMAN_a8,        PIXMAN_null,     PIXMAN_a8,       fast_composite_add_8000_8000,   0 },
+    { PIXMAN_OP_ADD, PIXMAN_solid,     PIXMAN_a8r8g8b8, PIXMAN_a8r8g8b8, fast_composite_add_n_8888_8888_ca, NEED_COMPONENT_ALPHA },
     { PIXMAN_OP_ADD, PIXMAN_solid,     PIXMAN_a8,       PIXMAN_a8,       fast_composite_add_8888_8_8,    0 },
     { PIXMAN_OP_SRC, PIXMAN_solid,     PIXMAN_null,     PIXMAN_a8r8g8b8, fast_composite_solid_fill, 0 },
     { PIXMAN_OP_SRC, PIXMAN_solid,     PIXMAN_null,     PIXMAN_x8r8g8b8, fast_composite_solid_fill, 0 },
diff --git a/pixman/pixman/pixman-general.c b/pixman/pixman/pixman-general.c
index 6414b01a5..3ead3dac7 100644
--- a/pixman/pixman/pixman-general.c
+++ b/pixman/pixman/pixman-general.c
@@ -73,7 +73,7 @@ general_composite_rect  (pixman_implementation_t *imp,
     fetch_scanline_t fetch_src = NULL, fetch_mask = NULL, fetch_dest = NULL;
     pixman_combine_32_func_t compose;
     store_scanline_t store;
-    source_pict_class_t src_class, mask_class;
+    source_image_class_t src_class, mask_class;
     pixman_bool_t component_alpha;
     uint32_t *bits;
     int32_t stride;
diff --git a/pixman/pixman/pixman-image.c b/pixman/pixman/pixman-image.c
index 8b4fb6488..583195377 100644
--- a/pixman/pixman/pixman-image.c
+++ b/pixman/pixman/pixman-image.c
@@ -62,7 +62,7 @@ _pixman_init_gradient (gradient_t *                  gradient,
  * depth, but that's a project for the future.
  */
 void
-_pixman_image_get_scanline_generic_64 (pixman_image_t * pict,
+_pixman_image_get_scanline_generic_64 (pixman_image_t * image,
                                        int              x,
                                        int              y,
                                        int              width,
@@ -85,7 +85,7 @@ _pixman_image_get_scanline_generic_64 (pixman_image_t * pict,
     }
 
     /* Fetch the source image into the first half of buffer. */
-    _pixman_image_get_scanline_32 (pict, x, y, width, (uint32_t*)buffer, mask8,
+    _pixman_image_get_scanline_32 (image, x, y, width, (uint32_t*)buffer, mask8,
                                    mask_bits);
 
     /* Expand from 32bpp to 64bpp in place. */
@@ -120,12 +120,13 @@ _pixman_image_allocate (void)
 	common->destroy_func = NULL;
 	common->destroy_data = NULL;
 	common->need_workaround = FALSE;
+	common->dirty = TRUE;
     }
 
     return image;
 }
 
-source_pict_class_t
+source_image_class_t
 _pixman_image_classify (pixman_image_t *image,
                         int             x,
                         int             y,
@@ -168,7 +169,7 @@ _pixman_image_get_scanline_64 (pixman_image_t *image,
 static void
 image_property_changed (pixman_image_t *image)
 {
-    image->common.property_changed (image);
+    image->common.dirty = TRUE;
 }
 
 /* Ref Counting */
@@ -238,6 +239,16 @@ _pixman_image_reset_clip_region (pixman_image_t *image)
     image->common.have_clip_region = FALSE;
 }
 
+void
+_pixman_image_validate (pixman_image_t *image)
+{
+    if (image->common.dirty)
+    {
+	image->common.property_changed (image);
+	image->common.dirty = FALSE;
+    }
+}
+
 PIXMAN_EXPORT pixman_bool_t
 pixman_image_set_clip_region32 (pixman_image_t *   image,
                                 pixman_region32_t *region)
diff --git a/pixman/pixman/pixman-linear-gradient.c b/pixman/pixman/pixman-linear-gradient.c
index b940d76ec..d9409fe50 100644
--- a/pixman/pixman/pixman-linear-gradient.c
+++ b/pixman/pixman/pixman-linear-gradient.c
@@ -30,7 +30,7 @@
 #include <stdlib.h>
 #include "pixman-private.h"
 
-static source_pict_class_t
+static source_image_class_t
 linear_gradient_classify (pixman_image_t *image,
                           int             x,
                           int             y,
@@ -289,8 +289,6 @@ pixman_image_create_linear_gradient (pixman_point_fixed_t *        p1,
     image->common.classify = linear_gradient_classify;
     image->common.property_changed = linear_gradient_property_changed;
 
-    linear_gradient_property_changed (image);
-
     return image;
 }
 
diff --git a/pixman/pixman/pixman-mmx.c b/pixman/pixman/pixman-mmx.c
index 7d4ec4f2e..7dcc1dc96 100644
--- a/pixman/pixman/pixman-mmx.c
+++ b/pixman/pixman/pixman-mmx.c
@@ -400,25 +400,18 @@ pack_565 (__m64 pixel, __m64 target, int pos)
 static force_inline __m64
 pix_add_mul (__m64 x, __m64 a, __m64 y, __m64 b)
 {
-    x = _mm_mullo_pi16 (x, a);
-    y = _mm_mullo_pi16 (y, b);
-    x = _mm_adds_pu16 (x, MC (4x0080));
-    x = _mm_adds_pu16 (x, y);
-    x = _mm_adds_pu16 (x, _mm_srli_pi16 (x, 8));
-    x = _mm_srli_pi16 (x, 8);
+    x = pix_multiply (x, a);
+    y = pix_multiply (y, b);
 
-    return x;
+    return pix_add (x, y);
 }
 
 #else
 
 #define pix_add_mul(x, a, y, b)	 \
-    ( x = _mm_mullo_pi16 (x, a), \
-      y = _mm_mullo_pi16 (y, b), \
-      x = _mm_adds_pu16 (x, MC (4x0080)), \
-      x = _mm_adds_pu16 (x, y), \
-      x = _mm_adds_pu16 (x, _mm_srli_pi16 (x, 8)), \
-      _mm_srli_pi16 (x, 8) )
+    ( x = pix_multiply (x, a),	 \
+      y = pix_multiply (y, a),	 \
+      pix_add (x, y) )
 
 #endif
 
@@ -1117,7 +1110,7 @@ mmx_composite_over_n_8888 (pixman_implementation_t *imp,
 
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
-    if (src >> 24 == 0)
+    if (src == 0)
 	return;
 
     PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
@@ -1196,7 +1189,7 @@ mmx_composite_over_n_0565 (pixman_implementation_t *imp,
 
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
-    if (src >> 24 == 0)
+    if (src == 0)
 	return;
 
     PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
@@ -1285,7 +1278,7 @@ mmx_composite_over_n_8888_8888_ca (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     srca = src >> 24;
-    if (srca == 0)
+    if (src == 0)
 	return;
 
     PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
@@ -1772,7 +1765,7 @@ mmx_composite_over_n_8_8888 (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     srca = src >> 24;
-    if (srca == 0)
+    if (src == 0)
 	return;
 
     srcsrc = (uint64_t)src << 32 | src;
@@ -2054,7 +2047,7 @@ mmx_composite_src_n_8_8888 (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     srca = src >> 24;
-    if (srca == 0)
+    if (src == 0)
     {
 	pixman_fill_mmx (dst_image->bits.bits, dst_image->bits.rowstride,
 			 PIXMAN_FORMAT_BPP (dst_image->bits.format),
@@ -2189,7 +2182,7 @@ mmx_composite_over_n_8_0565 (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     srca = src >> 24;
-    if (srca == 0)
+    if (src == 0)
 	return;
 
     PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
@@ -2548,7 +2541,7 @@ mmx_composite_over_n_8888_0565_ca (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     srca = src >> 24;
-    if (srca == 0)
+    if (src == 0)
 	return;
 
     PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
@@ -2659,8 +2652,6 @@ mmx_composite_in_n_8_8 (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     sa = src >> 24;
-    if (sa == 0)
-	return;
 
     vsrc = load8888 (src);
     vsrca = expand_alpha (vsrc);
@@ -2780,19 +2771,19 @@ mmx_composite_in_8_8 (pixman_implementation_t *imp,
 }
 
 static void
-mmx_composite_add_8888_8_8 (pixman_implementation_t *imp,
-                            pixman_op_t              op,
-                            pixman_image_t *         src_image,
-                            pixman_image_t *         mask_image,
-                            pixman_image_t *         dst_image,
-                            int32_t                  src_x,
-                            int32_t                  src_y,
-                            int32_t                  mask_x,
-                            int32_t                  mask_y,
-                            int32_t                  dest_x,
-                            int32_t                  dest_y,
-                            int32_t                  width,
-                            int32_t                  height)
+mmx_composite_add_n_8_8 (pixman_implementation_t *imp,
+			 pixman_op_t              op,
+			 pixman_image_t *         src_image,
+			 pixman_image_t *         mask_image,
+			 pixman_image_t *         dst_image,
+			 int32_t                  src_x,
+			 int32_t                  src_y,
+			 int32_t                  mask_x,
+			 int32_t                  mask_y,
+			 int32_t                  dest_x,
+			 int32_t                  dest_y,
+			 int32_t                  width,
+			 int32_t                  height)
 {
     uint8_t     *dst_line, *dst;
     uint8_t     *mask_line, *mask;
@@ -2808,7 +2799,8 @@ mmx_composite_add_8888_8_8 (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     sa = src >> 24;
-    if (sa == 0)
+
+    if (src == 0)
 	return;
 
     vsrc = load8888 (src);
@@ -3285,7 +3277,7 @@ static const pixman_fast_path_t mmx_fast_paths[] =
     { PIXMAN_OP_ADD, PIXMAN_a8r8g8b8,  PIXMAN_null,     PIXMAN_a8r8g8b8, mmx_composite_add_8888_8888,   0 },
     { PIXMAN_OP_ADD, PIXMAN_a8b8g8r8,  PIXMAN_null,     PIXMAN_a8b8g8r8, mmx_composite_add_8888_8888,   0 },
     { PIXMAN_OP_ADD, PIXMAN_a8,        PIXMAN_null,     PIXMAN_a8,       mmx_composite_add_8000_8000,   0 },
-    { PIXMAN_OP_ADD, PIXMAN_solid,     PIXMAN_a8,       PIXMAN_a8,       mmx_composite_add_8888_8_8,    0 },
+    { PIXMAN_OP_ADD, PIXMAN_solid,     PIXMAN_a8,       PIXMAN_a8,       mmx_composite_add_n_8_8,    0 },
 
     { PIXMAN_OP_SRC, PIXMAN_solid,     PIXMAN_a8,       PIXMAN_a8r8g8b8, mmx_composite_src_n_8_8888, 0 },
     { PIXMAN_OP_SRC, PIXMAN_solid,     PIXMAN_a8,       PIXMAN_x8r8g8b8, mmx_composite_src_n_8_8888, 0 },
diff --git a/pixman/pixman/pixman-private.h b/pixman/pixman/pixman-private.h
index 052f3a98d..ff7a65f88 100644
--- a/pixman/pixman/pixman-private.h
+++ b/pixman/pixman/pixman-private.h
@@ -26,7 +26,7 @@ typedef struct radial_gradient radial_gradient_t;
 typedef struct bits_image bits_image_t;
 typedef struct circle circle_t;
 
-typedef void (*fetch_scanline_t) (pixman_image_t *pict,
+typedef void (*fetch_scanline_t) (pixman_image_t *image,
 				  int             x,
 				  int             y,
 				  int             width,
@@ -34,9 +34,13 @@ typedef void (*fetch_scanline_t) (pixman_image_t *pict,
 				  const uint32_t *mask,
 				  uint32_t        mask_bits);
 
-typedef void (*fetch_pixels_t)   (bits_image_t *  image,
-				  uint32_t *      buffer,
-				  int             n_pixels);
+typedef uint32_t (*fetch_pixel_32_t) (bits_image_t *image,
+				      int           x,
+				      int           y);
+
+typedef uint64_t (*fetch_pixel_64_t) (bits_image_t *image,
+				      int           x,
+				      int           y);
 
 typedef void (*store_scanline_t) (bits_image_t *  image,
 				  int             x,
@@ -58,9 +62,9 @@ typedef enum
     SOURCE_IMAGE_CLASS_UNKNOWN,
     SOURCE_IMAGE_CLASS_HORIZONTAL,
     SOURCE_IMAGE_CLASS_VERTICAL,
-} source_pict_class_t;
+} source_image_class_t;
 
-typedef source_pict_class_t (*classify_func_t) (pixman_image_t *image,
+typedef source_image_class_t (*classify_func_t) (pixman_image_t *image,
 						int             x,
 						int             y,
 						int             width,
@@ -78,6 +82,7 @@ struct image_common
     pixman_bool_t               clip_sources;       /* Whether the clip applies when
 						     * the image is used as a source
 						     */
+    pixman_bool_t		dirty;
     pixman_bool_t               need_workaround;
     pixman_transform_t *        transform;
     pixman_repeat_t             repeat;
@@ -100,7 +105,7 @@ struct image_common
 struct source_image
 {
     image_common_t common;
-    source_pict_class_t class;
+    source_image_class_t class;
 };
 
 struct solid_fill
@@ -163,9 +168,13 @@ struct bits_image
     uint32_t *                 free_me;
     int                        rowstride;  /* in number of uint32_t's */
 
-    /* Fetch raw pixels, with no regard for transformations, alpha map etc. */
-    fetch_pixels_t             fetch_pixels_raw_32;
-    fetch_pixels_t             fetch_pixels_raw_64;
+    /* Fetch a pixel, disregarding alpha maps, transformations etc. */
+    fetch_pixel_32_t	       fetch_pixel_raw_32;
+    fetch_pixel_64_t	       fetch_pixel_raw_64;
+
+    /* Fetch a pixel, taking alpha maps into account */
+    fetch_pixel_32_t	       fetch_pixel_32;
+    fetch_pixel_64_t	       fetch_pixel_64;
 
     /* Fetch raw scanlines, with no regard for transformations, alpha maps etc. */
     fetch_scanline_t           fetch_scanline_raw_32;
@@ -202,7 +211,7 @@ void
 _pixman_bits_image_setup_raw_accessors (bits_image_t *image);
 
 void
-_pixman_image_get_scanline_generic_64  (pixman_image_t *pict,
+_pixman_image_get_scanline_generic_64  (pixman_image_t *image,
                                         int             x,
                                         int             y,
                                         int             width,
@@ -210,7 +219,7 @@ _pixman_image_get_scanline_generic_64  (pixman_image_t *pict,
                                         const uint32_t *mask,
                                         uint32_t        mask_bits);
 
-source_pict_class_t
+source_image_class_t
 _pixman_image_classify (pixman_image_t *image,
                         int             x,
                         int             y,
@@ -269,6 +278,9 @@ _pixman_init_gradient (gradient_t *                  gradient,
 void
 _pixman_image_reset_clip_region (pixman_image_t *image);
 
+void
+_pixman_image_validate (pixman_image_t *image);
+
 pixman_bool_t
 _pixman_image_is_opaque (pixman_image_t *image);
 
@@ -279,14 +291,14 @@ uint32_t
 _pixman_image_get_solid (pixman_image_t *     image,
                          pixman_format_code_t format);
 
-#define PIXMAN_IMAGE_GET_LINE(pict, x, y, type, out_stride, line, mul)	\
+#define PIXMAN_IMAGE_GET_LINE(image, x, y, type, out_stride, line, mul)	\
     do									\
     {									\
 	uint32_t *__bits__;						\
 	int       __stride__;						\
         								\
-	__bits__ = pict->bits.bits;                                     \
-	__stride__ = pict->bits.rowstride;                              \
+	__bits__ = image->bits.bits;					\
+	__stride__ = image->bits.rowstride;				\
 	(out_stride) =							\
 	    __stride__ * (int) sizeof (uint32_t) / (int) sizeof (type);	\
 	(line) =							\
diff --git a/pixman/pixman/pixman-radial-gradient.c b/pixman/pixman/pixman-radial-gradient.c
index a3b591673..022157b9b 100644
--- a/pixman/pixman/pixman-radial-gradient.c
+++ b/pixman/pixman/pixman-radial-gradient.c
@@ -198,41 +198,64 @@ radial_gradient_get_scanline_32 (pixman_image_t *image,
 
     if (affine)
     {
+	/* When computing t over a scanline, we notice that some expressions
+	 * are constant so we can compute them just once. Given:
+	 *
+	 * t = (-2·B ± ⎷(B² - 4·A·C)) / 2·A
+	 *
+	 * where
+	 *
+	 * A = cdx² + cdy² - dr² [precomputed as radial->A]
+	 * B = -2·(pdx·cdx + pdy·cdy + r₁·dr)
+	 * C = pdx² + pdy² - r₁²
+	 *
+	 * Since we have an affine transformation, we know that (pdx, pdy)
+	 * increase linearly with each pixel,
+	 *
+	 * pdx = pdx₀ + n·cx,
+	 * pdy = pdy₀ + n·cy,
+	 *
+	 * we can then express B in terms of an linear increment along
+	 * the scanline:
+	 *
+	 * B = B₀ + n·cB, with
+	 * B₀ = -2·(pdx₀·cdx + pdy₀·cdy + r₁·dr) and
+	 * cB = -2·(cx·cdx + cy·cdy)
+	 *
+	 * Thus we can replace the full evaluation of B per-pixel (4 multiplies,
+	 * 2 additions) with a single addition.
+	 */
+	double r1   = radial->c1.radius / 65536.;
+	double r1sq = r1 * r1;
+	double pdx  = rx - radial->c1.x / 65536.;
+	double pdy  = ry - radial->c1.y / 65536.;
+	double A = radial->A;
+	double invA = -65536. / (2. * A);
+	double A4 = -4. * A;
+	double B  = -2. * (pdx*radial->cdx + pdy*radial->cdy + r1*radial->dr);
+	double cB = -2. *  (cx*radial->cdx +  cy*radial->cdy);
+	pixman_bool_t invert = A * radial->dr < 0;
+
 	while (buffer < end)
 	{
 	    if (!mask || *mask++ & mask_bits)
 	    {
-		double pdx, pdy;
-		double B, C;
-		double det;
-		double c1x = radial->c1.x / 65536.0;
-		double c1y = radial->c1.y / 65536.0;
-		double r1  = radial->c1.radius / 65536.0;
 		pixman_fixed_48_16_t t;
-
-		pdx = rx - c1x;
-		pdy = ry - c1y;
-
-		B = -2 * (pdx * radial->cdx +
-			  pdy * radial->cdy +
-			  r1 * radial->dr);
-		C = pdx * pdx + pdy * pdy - r1 * r1;
-
-		det = (B * B) - (4 * radial->A * C);
-		if (det < 0.0)
-		    det = 0.0;
-
-		if (radial->A < 0)
-		    t = (pixman_fixed_48_16_t) ((-B - sqrt (det)) / (2.0 * radial->A) * 65536);
+		double det = B * B + A4 * (pdx * pdx + pdy * pdy - r1sq);
+		if (det <= 0.)
+		    t = (pixman_fixed_48_16_t) (B * invA);
+		else if (invert)
+		    t = (pixman_fixed_48_16_t) ((B + sqrt (det)) * invA);
 		else
-		    t = (pixman_fixed_48_16_t) ((-B + sqrt (det)) / (2.0 * radial->A) * 65536);
+		    t = (pixman_fixed_48_16_t) ((B - sqrt (det)) * invA);
 
 		*buffer = _pixman_gradient_walker_pixel (&walker, t);
 	    }
 	    ++buffer;
 
-	    rx += cx;
-	    ry += cy;
+	    pdx += cx;
+	    pdy += cy;
+	    B += cB;
 	}
     }
     else
@@ -273,7 +296,7 @@ radial_gradient_get_scanline_32 (pixman_image_t *image,
 		if (det < 0.0)
 		    det = 0.0;
 
-		if (radial->A < 0)
+		if (radial->A * radial->dr < 0)
 		    t = (pixman_fixed_48_16_t) ((-B - sqrt (det)) / (2.0 * radial->A) * 65536);
 		else
 		    t = (pixman_fixed_48_16_t) ((-B + sqrt (det)) / (2.0 * radial->A) * 65536);
@@ -340,8 +363,6 @@ pixman_image_create_radial_gradient (pixman_point_fixed_t *        inner,
 
     image->common.property_changed = radial_gradient_property_changed;
 
-    radial_gradient_property_changed (image);
-
     return image;
 }
 
diff --git a/pixman/pixman/pixman-region.c b/pixman/pixman/pixman-region.c
index 387dbba7f..f88955f3b 100644
--- a/pixman/pixman/pixman-region.c
+++ b/pixman/pixman/pixman-region.c
@@ -64,17 +64,14 @@
 #define PIXREGION_END(reg) PIXREGION_BOX (reg, (reg)->data->numRects - 1)
 
 #define GOOD_RECT(rect) ((rect)->x1 < (rect)->x2 && (rect)->y1 < (rect)->y2)
+#define BAD_RECT(rect) ((rect)->x1 > (rect)->x2 || (rect)->y1 > (rect)->y2)
 
-#define PIXMAN_REGION_LOG_FAILURES
+#define noPIXMAN_REGION_LOG_FAILURES
 
-#if defined PIXMAN_REGION_DEBUG
-
-#    define GOOD(reg) assert (PREFIX (_selfcheck) (reg))
-
-#elif defined PIXMAN_REGION_LOG_FAILURES
+#if defined PIXMAN_REGION_LOG_FAILURES || defined PIXMAN_REGION_DEBUG
 
 static void
-log_region_error (void)
+log_region_error (const char *function, const char *message)
 {
     static int n_messages = 0;
 
@@ -82,8 +79,13 @@ log_region_error (void)
     {
 	fprintf (stderr,
 		 "*** BUG ***\n"
-		 "Malformed region detected\n"
-		 "Set a breakpoint on 'log_region_error' to debug\n\n");
+		 "%s: %s\n"
+		 "Set a breakpoint on 'log_region_error' to debug\n\n",
+                 function, message);
+
+#if defined PIXMAN_REGION_DEBUG
+        abort ();
+#endif
 
 	n_messages++;
     }
@@ -93,11 +95,12 @@ log_region_error (void)
     do									\
     {									\
 	if (!PREFIX (_selfcheck (reg)))					\
-	    log_region_error ();					\
+	    log_region_error (FUNC, "Malformed region " # reg);         \
     } while (0)
 
 #else
 
+#define log_region_error(function, name)
 #define GOOD(reg)
 
 #endif
@@ -383,6 +386,8 @@ PREFIX (_init_rect) (region_type_t *	region,
 
     if (!GOOD_RECT (&region->extents))
     {
+        if (BAD_RECT (&region->extents))
+            log_region_error (FUNC, "Invalid rectangle passed");
         PREFIX (_init) (region);
         return;
     }
@@ -395,6 +400,8 @@ PREFIX (_init_with_extents) (region_type_t *region, box_type_t *extents)
 {
     if (!GOOD_RECT (extents))
     {
+        if (BAD_RECT (extents))
+            log_region_error (FUNC, "Invalid rectangle passed");
         PREFIX (_init) (region);
         return;
     }
@@ -1346,7 +1353,11 @@ PREFIX (_union_rect) (region_type_t *dest,
     region.extents.y2 = y + height;
 
     if (!GOOD_RECT (&region.extents))
+    {
+        if (BAD_RECT (&region.extents))
+            log_region_error (FUNC, "Invalid rectangle passed");
 	return PREFIX (_copy) (dest, source);
+    }
     
     region.data = NULL;
 
diff --git a/pixman/pixman/pixman-solid-fill.c b/pixman/pixman/pixman-solid-fill.c
index 6a612272a..38675dca8 100644
--- a/pixman/pixman/pixman-solid-fill.c
+++ b/pixman/pixman/pixman-solid-fill.c
@@ -44,7 +44,7 @@ solid_fill_get_scanline_32 (pixman_image_t *image,
     return;
 }
 
-static source_pict_class_t
+static source_image_class_t
 solid_fill_classify (pixman_image_t *image,
                      int             x,
                      int             y,
@@ -86,8 +86,6 @@ pixman_image_create_solid_fill (pixman_color_t *color)
     img->common.classify = solid_fill_classify;
     img->common.property_changed = solid_fill_property_changed;
 
-    solid_fill_property_changed (img);
-
     return img;
 }
 
diff --git a/pixman/pixman/pixman-sse2.c b/pixman/pixman/pixman-sse2.c
index 2fa956e21..727ad42ec 100644
--- a/pixman/pixman/pixman-sse2.c
+++ b/pixman/pixman/pixman-sse2.c
@@ -264,19 +264,14 @@ pix_add_multiply_2x128 (__m128i* src_lo,
                         __m128i* ret_lo,
                         __m128i* ret_hi)
 {
-    __m128i lo, hi;
-    __m128i mul_lo, mul_hi;
+    __m128i t1_lo, t1_hi;
+    __m128i t2_lo, t2_hi;
 
-    lo = _mm_mullo_epi16 (*src_lo, *alpha_dst_lo);
-    hi = _mm_mullo_epi16 (*src_hi, *alpha_dst_hi);
-    mul_lo = _mm_mullo_epi16 (*dst_lo, *alpha_src_lo);
-    mul_hi = _mm_mullo_epi16 (*dst_hi, *alpha_src_hi);
-    lo = _mm_adds_epu16 (lo, mask_0080);
-    hi = _mm_adds_epu16 (hi, mask_0080);
-    lo = _mm_adds_epu16 (lo, mul_lo);
-    hi = _mm_adds_epu16 (hi, mul_hi);
-    *ret_lo = _mm_mulhi_epu16 (lo, mask_0101);
-    *ret_hi = _mm_mulhi_epu16 (hi, mask_0101);
+    pix_multiply_2x128 (src_lo, src_hi, alpha_dst_lo, alpha_dst_hi, &t1_lo, &t1_hi);
+    pix_multiply_2x128 (dst_lo, dst_hi, alpha_src_lo, alpha_src_hi, &t2_lo, &t2_hi);
+
+    *ret_lo = _mm_adds_epu8 (t1_lo, t2_lo);
+    *ret_hi = _mm_adds_epu8 (t1_hi, t2_hi);
 }
 
 static force_inline void
@@ -457,11 +452,10 @@ pix_add_multiply_1x64 (__m64* src,
                        __m64* dst,
                        __m64* alpha_src)
 {
-    return _mm_mulhi_pu16 (
-	_mm_adds_pu16 (_mm_adds_pu16 (_mm_mullo_pi16 (*src, *alpha_dst),
-				      mask_x0080),
-		       _mm_mullo_pi16 (*dst, *alpha_src)),
-	mask_x0101);
+    __m64 t1 = pix_multiply_1x64 (*src, *alpha_dst);
+    __m64 t2 = pix_multiply_1x64 (*dst, *alpha_src);
+
+    return _mm_adds_pu8 (t1, t2);
 }
 
 static force_inline __m64
@@ -3098,6 +3092,145 @@ sse2_composite_over_n_0565 (pixman_implementation_t *imp,
     _mm_empty ();
 }
 
+/* ------------------------------
+ * composite_add_n_8888_8888_ca
+ */
+static void
+sse2_composite_add_n_8888_8888_ca (pixman_implementation_t *imp,
+				   pixman_op_t              op,
+				   pixman_image_t *         src_image,
+				   pixman_image_t *         mask_image,
+				   pixman_image_t *         dst_image,
+				   int32_t                  src_x,
+				   int32_t                  src_y,
+				   int32_t                  mask_x,
+				   int32_t                  mask_y,
+				   int32_t                  dest_x,
+				   int32_t                  dest_y,
+				   int32_t                  width,
+				   int32_t                  height)
+{
+    uint32_t src, srca;
+    uint32_t    *dst_line, d;
+    uint32_t    *mask_line, m;
+    uint32_t pack_cmp;
+    int dst_stride, mask_stride;
+
+    __m128i xmm_src, xmm_alpha;
+    __m128i xmm_dst;
+    __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+
+    __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest;
+
+    src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+    srca = src >> 24;
+    
+    if (src == 0)
+	return;
+
+    PIXMAN_IMAGE_GET_LINE (
+	dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+    PIXMAN_IMAGE_GET_LINE (
+	mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+
+    xmm_src = _mm_unpacklo_epi8 (
+	create_mask_2x32_128 (src, src), _mm_setzero_si128 ());
+    xmm_alpha = expand_alpha_1x128 (xmm_src);
+    mmx_src   = _mm_movepi64_pi64 (xmm_src);
+    mmx_alpha = _mm_movepi64_pi64 (xmm_alpha);
+
+    while (height--)
+    {
+	int w = width;
+	const uint32_t *pm = (uint32_t *)mask_line;
+	uint32_t *pd = (uint32_t *)dst_line;
+
+	dst_line += dst_stride;
+	mask_line += mask_stride;
+
+	/* call prefetch hint to optimize cache load*/
+	cache_prefetch ((__m128i*)pd);
+	cache_prefetch ((__m128i*)pm);
+
+	while (w && (unsigned long)pd & 15)
+	{
+	    m = *pm++;
+
+	    if (m)
+	    {
+		d = *pd;
+		
+		mmx_mask = unpack_32_1x64 (m);
+		mmx_dest = unpack_32_1x64 (d);
+
+		*pd = pack_1x64_32 (
+		    _mm_adds_pu8 (pix_multiply_1x64 (mmx_mask, mmx_src), mmx_dest));
+	    }
+
+	    pd++;
+	    w--;
+	}
+
+	/* call prefetch hint to optimize cache load*/
+	cache_prefetch ((__m128i*)pd);
+	cache_prefetch ((__m128i*)pm);
+
+	while (w >= 4)
+	{
+	    /* fill cache line with next memory */
+	    cache_prefetch_next ((__m128i*)pd);
+	    cache_prefetch_next ((__m128i*)pm);
+
+	    xmm_mask = load_128_unaligned ((__m128i*)pm);
+
+	    pack_cmp =
+		_mm_movemask_epi8 (
+		    _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ()));
+
+	    /* if all bits in mask are zero, pack_cmp are equal to 0xffff */
+	    if (pack_cmp != 0xffff)
+	    {
+		xmm_dst = load_128_aligned ((__m128i*)pd);
+
+		unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+
+		pix_multiply_2x128 (&xmm_src, &xmm_src,
+				    &xmm_mask_lo, &xmm_mask_hi,
+				    &xmm_mask_lo, &xmm_mask_hi);
+		xmm_mask_hi = pack_2x128_128 (xmm_mask_lo, xmm_mask_hi);
+		
+		save_128_aligned (
+		    (__m128i*)pd, _mm_adds_epu8 (xmm_mask_hi, xmm_dst));
+	    }
+
+	    pd += 4;
+	    pm += 4;
+	    w -= 4;
+	}
+
+	while (w)
+	{
+	    m = *pm++;
+
+	    if (m)
+	    {
+		d = *pd;
+		
+		mmx_mask = unpack_32_1x64 (m);
+		mmx_dest = unpack_32_1x64 (d);
+
+		*pd = pack_1x64_32 (
+		    _mm_adds_pu8 (pix_multiply_1x64 (mmx_mask, mmx_src), mmx_dest));
+	    }
+
+	    pd++;
+	    w--;
+	}
+    }
+
+    _mm_empty ();
+}
+
 /* ---------------------------------------------------------------------------
  * composite_over_n_8888_8888_ca
  */
@@ -4718,8 +4851,6 @@ sse2_composite_in_n_8_8 (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     sa = src >> 24;
-    if (sa == 0)
-	return;
 
     xmm_alpha = expand_alpha_1x128 (expand_pixel_32_1x128 (src));
 
@@ -4934,8 +5065,6 @@ sse2_composite_add_8888_8_8 (pixman_implementation_t *imp,
     src = _pixman_image_get_solid (src_image, dst_image->bits.format);
 
     sa = src >> 24;
-    if (sa == 0)
-	return;
 
     xmm_alpha = expand_alpha_1x128 (expand_pixel_32_1x128 (src));
 
@@ -5502,6 +5631,7 @@ static const pixman_fast_path_t sse2_fast_paths[] =
     { PIXMAN_OP_OVER, PIXMAN_x8r8g8b8, PIXMAN_null,     PIXMAN_x8r8g8b8, sse2_composite_copy_area,           0 },
     { PIXMAN_OP_OVER, PIXMAN_x8b8g8r8, PIXMAN_null,     PIXMAN_x8b8g8r8, sse2_composite_copy_area,           0 },
 
+    { PIXMAN_OP_ADD,  PIXMAN_solid,    PIXMAN_a8r8g8b8, PIXMAN_a8r8g8b8, sse2_composite_add_n_8888_8888_ca,  NEED_COMPONENT_ALPHA },
     { PIXMAN_OP_ADD,  PIXMAN_a8,       PIXMAN_null,     PIXMAN_a8,       sse2_composite_add_8000_8000,       0 },
     { PIXMAN_OP_ADD,  PIXMAN_a8r8g8b8, PIXMAN_null,     PIXMAN_a8r8g8b8, sse2_composite_add_8888_8888,       0 },
     { PIXMAN_OP_ADD,  PIXMAN_a8b8g8r8, PIXMAN_null,     PIXMAN_a8b8g8r8, sse2_composite_add_8888_8888,       0 },
diff --git a/pixman/pixman/pixman-trap.c b/pixman/pixman/pixman-trap.c
index 4d7a90a36..962cbb39e 100644
--- a/pixman/pixman/pixman-trap.c
+++ b/pixman/pixman/pixman-trap.c
@@ -243,6 +243,8 @@ pixman_add_traps (pixman_image_t * image,
     pixman_edge_t l, r;
     pixman_fixed_t t, b;
 
+    _pixman_image_validate (image);
+    
     width = image->bits.width;
     height = image->bits.height;
     bpp = PIXMAN_FORMAT_BPP (image->bits.format);
@@ -357,6 +359,8 @@ pixman_rasterize_trapezoid (pixman_image_t *          image,
 
     return_if_fail (image->type == BITS);
 
+    _pixman_image_validate (image);
+    
     if (!pixman_trapezoid_valid (trap))
 	return;
 
diff --git a/pixman/pixman/pixman-utils.c b/pixman/pixman/pixman-utils.c
index a98141885..71282062c 100644
--- a/pixman/pixman/pixman-utils.c
+++ b/pixman/pixman/pixman-utils.c
@@ -80,7 +80,7 @@ clip_general_image (pixman_region32_t * region,
 
 static inline pixman_bool_t
 clip_source_image (pixman_region32_t * region,
-                   pixman_image_t *    picture,
+                   pixman_image_t *    image,
                    int                 dx,
                    int                 dy)
 {
@@ -89,11 +89,11 @@ clip_source_image (pixman_region32_t * region,
      * the clip was not set by a client, then it is a hierarchy
      * clip and those should always be ignored for sources).
      */
-    if (!picture->common.clip_sources || !picture->common.client_clip)
+    if (!image->common.clip_sources || !image->common.client_clip)
 	return TRUE;
 
     return clip_general_image (region,
-                               &picture->common.clip_region,
+                               &image->common.clip_region,
                                dx, dy);
 }
 
@@ -663,20 +663,23 @@ _pixman_run_fast_path (const pixman_fast_path_t *paths,
 	if (has_fast_path && src->type == BITS)
 	{
 	    has_fast_path = !src->bits.read_func &&
-	                    !src->bits.write_func;
+	                    !src->bits.write_func &&
+		            !PIXMAN_FORMAT_IS_WIDE (src->bits.format);
 	}
     }
 
     if (mask && has_fast_path)
     {
-	has_fast_path = mask->type == BITS &&
-	                !mask->common.transform &&
-	                !mask->common.alpha_map &&
-	                !mask->bits.read_func &&
-	                !mask->bits.write_func &&
-			mask->common.filter != PIXMAN_FILTER_CONVOLUTION &&
-			mask->common.repeat != PIXMAN_REPEAT_PAD &&
-			mask->common.repeat != PIXMAN_REPEAT_REFLECT;
+	has_fast_path =
+	    mask->type == BITS &&
+	    !mask->common.transform &&
+	    !mask->common.alpha_map &&
+	    !mask->bits.read_func &&
+	    !mask->bits.write_func &&
+	    mask->common.filter != PIXMAN_FILTER_CONVOLUTION &&
+	    mask->common.repeat != PIXMAN_REPEAT_PAD &&
+	    mask->common.repeat != PIXMAN_REPEAT_REFLECT &&
+	    !PIXMAN_FORMAT_IS_WIDE (mask->bits.format);
     }
 
     if (has_fast_path)
diff --git a/pixman/pixman/pixman-version.h b/pixman/pixman/pixman-version.h
index c8d69eaa7..65df97052 100644
--- a/pixman/pixman/pixman-version.h
+++ b/pixman/pixman/pixman-version.h
@@ -32,10 +32,10 @@
 #endif
 
 #define PIXMAN_VERSION_MAJOR 0
-#define PIXMAN_VERSION_MINOR 15
-#define PIXMAN_VERSION_MICRO 18
+#define PIXMAN_VERSION_MINOR 16
+#define PIXMAN_VERSION_MICRO 0
 
-#define PIXMAN_VERSION_STRING "0.15.18"
+#define PIXMAN_VERSION_STRING "0.16.0"
 
 #define PIXMAN_VERSION_ENCODE(major, minor, micro) (	\
 	  ((major) * 10000)				\
diff --git a/pixman/pixman/pixman-vmx.c b/pixman/pixman/pixman-vmx.c
index 6fc3cdea5..06325a7c0 100644
--- a/pixman/pixman/pixman-vmx.c
+++ b/pixman/pixman/pixman-vmx.c
@@ -45,24 +45,24 @@ static force_inline vector unsigned int
 pix_multiply (vector unsigned int p, vector unsigned int a)
 {
     vector unsigned short hi, lo, mod;
-    
+
     /* unpack to short */
     hi = (vector unsigned short)
 	vec_mergeh ((vector unsigned char)AVV (0),
 		    (vector unsigned char)p);
-    
+
     mod = (vector unsigned short)
 	vec_mergeh ((vector unsigned char)AVV (0),
 		    (vector unsigned char)a);
-    
+
     hi = vec_mladd (hi, mod, (vector unsigned short)
                     AVV (0x0080, 0x0080, 0x0080, 0x0080,
                          0x0080, 0x0080, 0x0080, 0x0080));
-    
+
     hi = vec_adds (hi, vec_sr (hi, vec_splat_u16 (8)));
-    
+
     hi = vec_sr (hi, vec_splat_u16 (8));
-    
+
     /* unpack to short */
     lo = (vector unsigned short)
 	vec_mergel ((vector unsigned char)AVV (0),
@@ -70,15 +70,15 @@ pix_multiply (vector unsigned int p, vector unsigned int a)
     mod = (vector unsigned short)
 	vec_mergel ((vector unsigned char)AVV (0),
 		    (vector unsigned char)a);
-    
+
     lo = vec_mladd (lo, mod, (vector unsigned short)
                     AVV (0x0080, 0x0080, 0x0080, 0x0080,
                          0x0080, 0x0080, 0x0080, 0x0080));
-    
+
     lo = vec_adds (lo, vec_sr (lo, vec_splat_u16 (8)));
-    
+
     lo = vec_sr (lo, vec_splat_u16 (8));
-    
+
     return (vector unsigned int)vec_packsu (hi, lo);
 }
 
@@ -95,56 +95,12 @@ pix_add_mul (vector unsigned int x,
              vector unsigned int y,
              vector unsigned int b)
 {
-    vector unsigned short hi, lo, mod, hiy, loy, mody;
-    
-    hi = (vector unsigned short)
-	vec_mergeh ((vector unsigned char)AVV (0),
-		    (vector unsigned char)x);
-    mod = (vector unsigned short)
-	vec_mergeh ((vector unsigned char)AVV (0),
-		    (vector unsigned char)a);
-    hiy = (vector unsigned short)
-	vec_mergeh ((vector unsigned char)AVV (0),
-		    (vector unsigned char)y);
-    mody = (vector unsigned short)
-	vec_mergeh ((vector unsigned char)AVV (0),
-		    (vector unsigned char)b);
-    
-    hi = vec_mladd (hi, mod, (vector unsigned short)
-                    AVV (0x0080, 0x0080, 0x0080, 0x0080,
-                         0x0080, 0x0080, 0x0080, 0x0080));
-    
-    hi = vec_mladd (hiy, mody, hi);
-    
-    hi = vec_adds (hi, vec_sr (hi, vec_splat_u16 (8)));
-    
-    hi = vec_sr (hi, vec_splat_u16 (8));
-    
-    lo = (vector unsigned short)
-	vec_mergel ((vector unsigned char)AVV (0),
-		    (vector unsigned char)x);
-    mod = (vector unsigned short)
-	vec_mergel ((vector unsigned char)AVV (0),
-		    (vector unsigned char)a);
-    
-    loy = (vector unsigned short)
-	vec_mergel ((vector unsigned char)AVV (0),
-		    (vector unsigned char)y);
-    mody = (vector unsigned short)
-	vec_mergel ((vector unsigned char)AVV (0),
-		    (vector unsigned char)b);
-    
-    lo = vec_mladd (lo, mod, (vector unsigned short)
-                    AVV (0x0080, 0x0080, 0x0080, 0x0080,
-                         0x0080, 0x0080, 0x0080, 0x0080));
-    
-    lo = vec_mladd (loy, mody, lo);
-    
-    lo = vec_adds (lo, vec_sr (lo, vec_splat_u16 (8)));
-    
-    lo = vec_sr (lo, vec_splat_u16 (8));
-    
-    return (vector unsigned int)vec_packsu (hi, lo);
+    vector unsigned int t1, t2;
+
+    t1 = pix_multiply (x, a);
+    t2 = pix_multiply (y, b);
+
+    return pix_add (t1, t2);
 }
 
 static force_inline vector unsigned int
@@ -161,7 +117,7 @@ over (vector unsigned int src,
 {
     vector unsigned char tmp = (vector unsigned char)
 	pix_multiply (dest, negate (srca));
-    
+
     tmp = vec_adds ((vector unsigned char)src, tmp);
     return (vector unsigned int)tmp;
 }
@@ -235,31 +191,31 @@ vmx_combine_over_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
+
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = over (vsrc, splat_alpha (vsrc), vdest);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t ia = ALPHA_8 (~s);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4 (d, ia, s);
-	
+
 	dest[i] = d;
     }
 }
@@ -274,35 +230,34 @@ vmx_combine_over_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = over (vsrc, splat_alpha (vsrc), vdest);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t ia;
-	
+
 	UN8x4_MUL_UN8 (s, m);
-	
+
 	ia = ALPHA_8 (~s);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4 (d, ia, s);
 	dest[i] = d;
     }
@@ -331,29 +286,29 @@ vmx_combine_over_reverse_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
+
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = over (vdest, splat_alpha (vdest), vsrc);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t ia = ALPHA_8 (~dest[i]);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4 (s, ia, d);
 	dest[i] = s;
     }
@@ -369,33 +324,33 @@ vmx_combine_over_reverse_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
+
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = over (vdest, splat_alpha (vdest), vsrc);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t ia = ALPHA_8 (~dest[i]);
-	
+
 	UN8x4_MUL_UN8 (s, m);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4 (s, ia, d);
 	dest[i] = s;
     }
@@ -424,28 +379,27 @@ vmx_combine_in_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = pix_multiply (vsrc, splat_alpha (vdest));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
-	
 	uint32_t s = src[i];
 	uint32_t a = ALPHA_8 (dest[i]);
+
 	UN8x4_MUL_UN8 (s, a);
 	dest[i] = s;
     }
@@ -461,33 +415,32 @@ vmx_combine_in_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = pix_multiply (vsrc, splat_alpha (vdest));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
 	uint32_t s = src[i];
 	uint32_t a = ALPHA_8 (dest[i]);
-	
+
 	UN8x4_MUL_UN8 (s, m);
-	
 	UN8x4_MUL_UN8 (s, a);
+
 	dest[i] = s;
     }
 }
@@ -515,28 +468,29 @@ vmx_combine_in_reverse_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = pix_multiply (vdest, splat_alpha (vsrc));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t d = dest[i];
 	uint32_t a = ALPHA_8 (src[i]);
+
 	UN8x4_MUL_UN8 (d, a);
+
 	dest[i] = d;
     }
 }
@@ -551,34 +505,33 @@ vmx_combine_in_reverse_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = pix_multiply (vdest, splat_alpha (vsrc));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
 	uint32_t d = dest[i];
 	uint32_t a = src[i];
-	
+
 	UN8x4_MUL_UN8 (a, m);
-	
 	a = ALPHA_8 (a);
 	UN8x4_MUL_UN8 (d, a);
+
 	dest[i] = d;
     }
 }
@@ -606,28 +559,29 @@ vmx_combine_out_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = pix_multiply (vsrc, splat_alpha (negate (vdest)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t s = src[i];
 	uint32_t a = ALPHA_8 (~dest[i]);
+
 	UN8x4_MUL_UN8 (s, a);
+
 	dest[i] = s;
     }
 }
@@ -642,33 +596,32 @@ vmx_combine_out_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = pix_multiply (vsrc, splat_alpha (negate (vdest)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
 	uint32_t s = src[i];
 	uint32_t a = ALPHA_8 (~dest[i]);
-	
+
 	UN8x4_MUL_UN8 (s, m);
-	
 	UN8x4_MUL_UN8 (s, a);
+
 	dest[i] = s;
     }
 }
@@ -696,28 +649,30 @@ vmx_combine_out_reverse_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
+
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = pix_multiply (vdest, splat_alpha (negate (vsrc)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t d = dest[i];
 	uint32_t a = ALPHA_8 (~src[i]);
+
 	UN8x4_MUL_UN8 (d, a);
+
 	dest[i] = d;
     }
 }
@@ -732,34 +687,33 @@ vmx_combine_out_reverse_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = pix_multiply (vdest, splat_alpha (negate (vsrc)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
 	uint32_t d = dest[i];
 	uint32_t a = src[i];
-	
+
 	UN8x4_MUL_UN8 (a, m);
-	
 	a = ALPHA_8 (~a);
 	UN8x4_MUL_UN8 (d, a);
+
 	dest[i] = d;
     }
 }
@@ -787,32 +741,32 @@ vmx_combine_atop_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = pix_add_mul (vsrc, splat_alpha (vdest),
 			     vdest, splat_alpha (negate (vsrc)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t dest_a = ALPHA_8 (d);
 	uint32_t src_ia = ALPHA_8 (~s);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_a, d, src_ia);
+
 	dest[i] = s;
     }
 }
@@ -827,25 +781,24 @@ vmx_combine_atop_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = pix_add_mul (vsrc, splat_alpha (vdest),
 			     vdest, splat_alpha (negate (vsrc)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
@@ -853,12 +806,13 @@ vmx_combine_atop_u_mask (uint32_t *      dest,
 	uint32_t d = dest[i];
 	uint32_t dest_a = ALPHA_8 (d);
 	uint32_t src_ia;
-	
+
 	UN8x4_MUL_UN8 (s, m);
-	
+
 	src_ia = ALPHA_8 (~s);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_a, d, src_ia);
+
 	dest[i] = s;
     }
 }
@@ -886,32 +840,32 @@ vmx_combine_atop_reverse_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = pix_add_mul (vdest, splat_alpha (vsrc),
 			     vsrc, splat_alpha (negate (vdest)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t src_a = ALPHA_8 (s);
 	uint32_t dest_ia = ALPHA_8 (~d);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_ia, d, src_a);
+
 	dest[i] = s;
     }
 }
@@ -926,25 +880,24 @@ vmx_combine_atop_reverse_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = pix_add_mul (vdest, splat_alpha (vsrc),
 			     vsrc, splat_alpha (negate (vdest)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
@@ -952,12 +905,13 @@ vmx_combine_atop_reverse_u_mask (uint32_t *      dest,
 	uint32_t d = dest[i];
 	uint32_t src_a;
 	uint32_t dest_ia = ALPHA_8 (~d);
-	
+
 	UN8x4_MUL_UN8 (s, m);
-	
+
 	src_a = ALPHA_8 (s);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_ia, d, src_a);
+
 	dest[i] = s;
     }
 }
@@ -985,32 +939,32 @@ vmx_combine_xor_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = pix_add_mul (vsrc, splat_alpha (negate (vdest)),
 			     vdest, splat_alpha (negate (vsrc)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t src_ia = ALPHA_8 (~s);
 	uint32_t dest_ia = ALPHA_8 (~d);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_ia, d, src_ia);
+
 	dest[i] = s;
     }
 }
@@ -1025,25 +979,24 @@ vmx_combine_xor_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = pix_add_mul (vsrc, splat_alpha (negate (vdest)),
 			     vdest, splat_alpha (negate (vsrc)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
@@ -1051,12 +1004,13 @@ vmx_combine_xor_u_mask (uint32_t *      dest,
 	uint32_t d = dest[i];
 	uint32_t src_ia;
 	uint32_t dest_ia = ALPHA_8 (~d);
-	
+
 	UN8x4_MUL_UN8 (s, m);
-	
+
 	src_ia = ALPHA_8 (~s);
-	
+
 	UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_ia, d, src_ia);
+
 	dest[i] = s;
     }
 }
@@ -1084,27 +1038,28 @@ vmx_combine_add_u_no_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKS (dest, src);
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORS (dest, src);
-	
+
 	vdest = pix_add (vsrc, vdest);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
+
 	UN8x4_ADD_UN8x4 (d, s);
+
 	dest[i] = d;
     }
 }
@@ -1119,33 +1074,32 @@ vmx_combine_add_u_mask (uint32_t *      dest,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, src_mask, mask_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSM (dest, src, mask);
-	
+
 	vdest = pix_add (vsrc, vdest);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t m = ALPHA_8 (mask[i]);
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
-	
+
 	UN8x4_MUL_UN8 (s, m);
-	
 	UN8x4_ADD_UN8x4 (d, s);
+
 	dest[i] = d;
     }
 }
@@ -1176,28 +1130,30 @@ vmx_combine_src_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = pix_multiply (vsrc, vmask);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	mask += 4;
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
+
 	UN8x4_MUL_UN8x4 (s, a);
+
 	dest[i] = s;
     }
 }
@@ -1214,30 +1170,34 @@ vmx_combine_over_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = in_over (vsrc, splat_alpha (vsrc), vmask, vdest);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	mask += 4;
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
+	uint32_t sa = ALPHA_8 (s);
+
 	UN8x4_MUL_UN8x4 (s, a);
+	UN8x4_MUL_UN8 (a, sa);
 	UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ~a, s);
+
 	dest[i] = d;
     }
 }
@@ -1254,32 +1214,33 @@ vmx_combine_over_reverse_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
 
     /* printf("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = over (vdest, splat_alpha (vdest), pix_multiply (vsrc, vmask));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	mask += 4;
 	src += 4;
 	dest += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
-	uint32_t da = ALPHA_8 (d);
+	uint32_t ida = ALPHA_8 (~d);
+
 	UN8x4_MUL_UN8x4 (s, a);
-	UN8x4_MUL_UN8x4_ADD_UN8x4 (s, ~da, d);
+	UN8x4_MUL_UN8_ADD_UN8x4 (s, ida, d);
+
 	dest[i] = s;
     }
 }
@@ -1296,31 +1257,32 @@ vmx_combine_in_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = pix_multiply (pix_multiply (vsrc, vmask), splat_alpha (vdest));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
 	uint32_t da = ALPHA_8 (dest[i]);
-	UN8x4_MUL_UN8 (s, a);
+
+	UN8x4_MUL_UN8x4 (s, a);
 	UN8x4_MUL_UN8 (s, da);
+
 	dest[i] = s;
     }
 }
@@ -1337,31 +1299,33 @@ vmx_combine_in_reverse_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
+
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = pix_multiply (vdest, pix_multiply (vmask, splat_alpha (vsrc)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t d = dest[i];
 	uint32_t sa = ALPHA_8 (src[i]);
+
 	UN8x4_MUL_UN8 (a, sa);
 	UN8x4_MUL_UN8x4 (d, a);
+
 	dest[i] = d;
     }
 }
@@ -1378,32 +1342,34 @@ vmx_combine_out_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
-	vdest = pix_multiply (pix_multiply (vsrc, vmask), splat_alpha (vdest));
-	
+
+	vdest = pix_multiply (
+	    pix_multiply (vsrc, vmask), splat_alpha (negate (vdest)));
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t da = ALPHA_8 (~d);
+
 	UN8x4_MUL_UN8x4 (s, a);
-	UN8x4_MUL_UN8x4 (s, da);
+	UN8x4_MUL_UN8 (s, da);
+
 	dest[i] = s;
     }
 }
@@ -1420,33 +1386,34 @@ vmx_combine_out_reverse_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = pix_multiply (
 	    vdest, negate (pix_multiply (vmask, splat_alpha (vsrc))));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t sa = ALPHA_8 (s);
-	UN8x4_MUL_UN8x4 (a, sa);
+
+	UN8x4_MUL_UN8 (a, sa);
 	UN8x4_MUL_UN8x4 (d, ~a);
+
 	dest[i] = d;
     }
 }
@@ -1460,30 +1427,32 @@ vmx_combine_atop_ca (pixman_implementation_t *imp,
                      int                      width)
 {
     int i;
-    vector unsigned int vdest, vsrc, vmask;
+    vector unsigned int vdest, vsrc, vmask, vsrca;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
-	vdest = pix_add_mul (pix_multiply (vsrc, vmask), splat_alpha (vdest),
-			     vdest,
-			     negate (pix_multiply (vmask,
-						   splat_alpha (vmask))));
-	
+
+	vsrca = splat_alpha (vsrc);
+
+	vsrc = pix_multiply (vsrc, vmask);
+	vmask = pix_multiply (vmask, vsrca);
+
+	vdest = pix_add_mul (vsrc, splat_alpha (vdest),
+			     negate (vmask), vdest);
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
@@ -1491,10 +1460,11 @@ vmx_combine_atop_ca (pixman_implementation_t *imp,
 	uint32_t d = dest[i];
 	uint32_t sa = ALPHA_8 (s);
 	uint32_t da = ALPHA_8 (d);
-	
+
 	UN8x4_MUL_UN8x4 (s, a);
 	UN8x4_MUL_UN8 (a, sa);
 	UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (d, ~a, s, da);
+
 	dest[i] = d;
     }
 }
@@ -1511,38 +1481,38 @@ vmx_combine_atop_reverse_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = pix_add_mul (vdest,
 			     pix_multiply (vmask, splat_alpha (vsrc)),
 			     pix_multiply (vsrc, vmask),
 			     negate (splat_alpha (vdest)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t sa = ALPHA_8 (s);
-	uint32_t da = ALPHA_8 (d);
-	
+	uint32_t da = ALPHA_8 (~d);
+
 	UN8x4_MUL_UN8x4 (s, a);
 	UN8x4_MUL_UN8 (a, sa);
-	UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (d, a, s, ~da);
+	UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (d, a, s, da);
+
 	dest[i] = d;
     }
 }
@@ -1559,38 +1529,38 @@ vmx_combine_xor_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = pix_add_mul (vdest,
 			     negate (pix_multiply (vmask, splat_alpha (vsrc))),
 			     pix_multiply (vsrc, vmask),
 			     negate (splat_alpha (vdest)));
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
 	uint32_t sa = ALPHA_8 (s);
-	uint32_t da = ALPHA_8 (d);
-	
+	uint32_t da = ALPHA_8 (~d);
+
 	UN8x4_MUL_UN8x4 (s, a);
 	UN8x4_MUL_UN8 (a, sa);
-	UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (d, ~a, s, ~da);
+	UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (d, ~a, s, da);
+
 	dest[i] = d;
     }
 }
@@ -1607,122 +1577,44 @@ vmx_combine_add_ca (pixman_implementation_t *imp,
     vector unsigned int vdest, vsrc, vmask;
     vector unsigned char tmp1, tmp2, tmp3, tmp4, edges,
 	dest_mask, mask_mask, src_mask, store_mask;
-    
+
     COMPUTE_SHIFT_MASKC (dest, src, mask);
-    
+
     /* printf ("%s\n",__PRETTY_FUNCTION__); */
     for (i = width / 4; i > 0; i--)
     {
-	
 	LOAD_VECTORSC (dest, src, mask);
-	
+
 	vdest = pix_add (pix_multiply (vsrc, vmask), vdest);
-	
+
 	STORE_VECTOR (dest);
-	
+
 	src += 4;
 	dest += 4;
 	mask += 4;
     }
-    
+
     for (i = width % 4; --i >= 0;)
     {
 	uint32_t a = mask[i];
 	uint32_t s = src[i];
 	uint32_t d = dest[i];
-	
+
 	UN8x4_MUL_UN8x4 (s, a);
 	UN8x4_ADD_UN8x4 (s, d);
-	dest[i] = s;
-    }
-}
-
-#if 0
-void
-vmx_composite_over_n_8888 (pixman_operator_t op,
-                           pixman_image_t *  src_image,
-                           pixman_image_t *  mask_image,
-                           pixman_image_t *  dst_image,
-                           int16_t           src_x,
-                           int16_t           src_y,
-                           int16_t           mask_x,
-                           int16_t           mask_y,
-                           int16_t           dest_x,
-                           int16_t           dest_y,
-                           uint16_t          width,
-                           uint16_t          height)
-{
-    uint32_t src;
-    uint32_t    *dst_line, *dst;
-    int dst_stride;
-    
-    _pixman_image_get_solid (src_image, dst_image, src);
-    
-    if (src >> 24 == 0)
-	return;
-    
-    PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
-    
-    while (height--)
-    {
-	dst = dst_line;
-	dst_line += dst_stride;
-	/* XXX vmx_combine_over_u (dst, src, width); */
-    }
-}
 
-void
-vmx_composite_over_n_0565 (pixman_operator_t op,
-                           pixman_image_t *  src_image,
-                           pixman_image_t *  mask_image,
-                           pixman_image_t *  dst_image,
-                           int16_t           src_x,
-                           int16_t           src_y,
-                           int16_t           mask_x,
-                           int16_t           mask_y,
-                           int16_t           dest_x,
-                           int16_t           dest_y,
-                           uint16_t          width,
-                           uint16_t          height)
-{
-    uint32_t src;
-    uint16_t    *dst_line, *dst;
-    uint16_t w;
-    int dst_stride;
-    
-    _pixman_image_get_solid (src_image, dst_image, src);
-    
-    if (src >> 24 == 0)
-	return;
-    
-    PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
-    
-    while (height--)
-    {
-	dst = dst_line;
-	dst_line += dst_stride;
-	vmx_combine_over_u565 (dst, src, width);
+	dest[i] = s;
     }
 }
 
-static const pixman_fast_path_t vmx_fast_path_array[] =
-{
-    { PIXMAN_OP_NONE },
-};
-
-const pixman_fast_path_t *const vmx_fast_paths = vmx_fast_path_array;
-
-#endif
-
 pixman_implementation_t *
 _pixman_implementation_create_vmx (void)
 {
     pixman_implementation_t *fast = _pixman_implementation_create_fast_path ();
     pixman_implementation_t *imp = _pixman_implementation_create (fast);
-    
+
     /* Set up function pointers */
-    
-    /* SSE code patch for fbcompose.c */
+
     imp->combine_32[PIXMAN_OP_OVER] = vmx_combine_over_u;
     imp->combine_32[PIXMAN_OP_OVER_REVERSE] = vmx_combine_over_reverse_u;
     imp->combine_32[PIXMAN_OP_IN] = vmx_combine_in_u;
@@ -1732,9 +1624,9 @@ _pixman_implementation_create_vmx (void)
     imp->combine_32[PIXMAN_OP_ATOP] = vmx_combine_atop_u;
     imp->combine_32[PIXMAN_OP_ATOP_REVERSE] = vmx_combine_atop_reverse_u;
     imp->combine_32[PIXMAN_OP_XOR] = vmx_combine_xor_u;
-    
+
     imp->combine_32[PIXMAN_OP_ADD] = vmx_combine_add_u;
-    
+
     imp->combine_32_ca[PIXMAN_OP_SRC] = vmx_combine_src_ca;
     imp->combine_32_ca[PIXMAN_OP_OVER] = vmx_combine_over_ca;
     imp->combine_32_ca[PIXMAN_OP_OVER_REVERSE] = vmx_combine_over_reverse_ca;
@@ -1746,7 +1638,6 @@ _pixman_implementation_create_vmx (void)
     imp->combine_32_ca[PIXMAN_OP_ATOP_REVERSE] = vmx_combine_atop_reverse_ca;
     imp->combine_32_ca[PIXMAN_OP_XOR] = vmx_combine_xor_ca;
     imp->combine_32_ca[PIXMAN_OP_ADD] = vmx_combine_add_ca;
-    
+
     return imp;
 }
-
diff --git a/pixman/pixman/pixman-x64-mmx-emulation.h b/pixman/pixman/pixman-x64-mmx-emulation.h
index 231030fba..378019cf2 100644
--- a/pixman/pixman/pixman-x64-mmx-emulation.h
+++ b/pixman/pixman/pixman-x64-mmx-emulation.h
@@ -135,8 +135,8 @@ _m_paddusb (__m64 a, __m64 b)        /* unoptimized */
     unsigned long long y = ((M64U (a) >> 8) & 0x00FF00FF00FF00FFULL) +
                            ((M64U (b) >> 8) & 0x00FF00FF00FF00FFULL);
 
-    x | = ((x & 0xFF00FF00FF00FF00ULL) >> 8) * 0xFF;
-    y | = ((y & 0xFF00FF00FF00FF00ULL) >> 8) * 0xFF;
+    x |= ((x & 0xFF00FF00FF00FF00ULL) >> 8) * 0xFF;
+    y |= ((y & 0xFF00FF00FF00FF00ULL) >> 8) * 0xFF;
 
     x = (x & 0x00FF00FF00FF00FFULL) | ((y & 0x00FF00FF00FF00FFULL) << 8);
 
@@ -152,8 +152,8 @@ _m_paddusw (__m64 a, __m64 b)        /* unoptimized */
     unsigned long long y = ((M64U (a) >> 16) & 0x0000FFFF0000FFFFULL) +
                            ((M64U (b) >> 16) & 0x0000FFFF0000FFFFULL);
 
-    x | = ((x & 0xFFFF0000FFFF0000) >> 16) * 0xFFFF;
-    y | = ((y & 0xFFFF0000FFFF0000) >> 16) * 0xFFFF;
+    x |= ((x & 0xFFFF0000FFFF0000) >> 16) * 0xFFFF;
+    y |= ((y & 0xFFFF0000FFFF0000) >> 16) * 0xFFFF;
 
     x = (x & 0x0000FFFF0000FFFFULL) | ((y & 0x0000FFFF0000FFFFULL) << 16);
 
diff --git a/pixman/pixman/pixman.c b/pixman/pixman/pixman.c
index 12b4c5ac1..0edd967cf 100644
--- a/pixman/pixman/pixman.c
+++ b/pixman/pixman/pixman.c
@@ -173,6 +173,11 @@ pixman_image_composite (pixman_op_t      op,
     uint32_t *dest_bits;
     int dest_dx, dest_dy;
 
+    _pixman_image_validate (src);
+    if (mask)
+	_pixman_image_validate (mask);
+    _pixman_image_validate (dest);
+    
     /*
      * Check if we can replace our operator by a simpler one
      * if the src or dest are opaque. The output operator should be
@@ -322,6 +327,8 @@ pixman_image_fill_rectangles (pixman_op_t                 op,
     pixman_color_t c;
     int i;
 
+    _pixman_image_validate (dest);
+    
     if (color->alpha == 0xffff)
     {
 	if (op == PIXMAN_OP_OVER)
diff --git a/pixman/test/Makefile.am b/pixman/test/Makefile.am
index 324cb723d..c56f62de7 100644
--- a/pixman/test/Makefile.am
+++ b/pixman/test/Makefile.am
@@ -4,6 +4,7 @@ INCLUDES = -I$(top_srcdir)/pixman -I$(top_builddir)/pixman
 TESTPROGRAMS =			\
 	region-test		\
 	scaling-test		\
+	blitters-test		\
 	fetch-test		\
 	oob-test		\
 	window-test		\
@@ -12,6 +13,7 @@ TESTPROGRAMS =			\
 fetch_test_LDADD = $(TEST_LDADD)
 region_test_LDADD = $(TEST_LDADD)
 scaling_test_LDADD = $(TEST_LDADD)
+blitters_test_LDADD = $(TEST_LDADD)
 trap_crasher_LDADD = $(TEST_LDADD)
 oob_test_LDADD = $(TEST_LDADD)
 window_test_LDADD = $(TEST_LDADD)
diff --git a/pixman/test/Makefile.in b/pixman/test/Makefile.in
index acdef4f78..f05356b02 100644
--- a/pixman/test/Makefile.in
+++ b/pixman/test/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -58,8 +58,8 @@ CONFIG_CLEAN_FILES =
 @HAVE_GTK_TRUE@	alpha-test$(EXEEXT) screen-test$(EXEEXT) \
 @HAVE_GTK_TRUE@	convolution-test$(EXEEXT) trap-test$(EXEEXT)
 am__EXEEXT_2 = region-test$(EXEEXT) scaling-test$(EXEEXT) \
-	fetch-test$(EXEEXT) oob-test$(EXEEXT) window-test$(EXEEXT) \
-	trap-crasher$(EXEEXT) $(am__EXEEXT_1)
+	blitters-test$(EXEEXT) fetch-test$(EXEEXT) oob-test$(EXEEXT) \
+	window-test$(EXEEXT) trap-crasher$(EXEEXT) $(am__EXEEXT_1)
 PROGRAMS = $(noinst_PROGRAMS)
 am__alpha_test_SOURCES_DIST = alpha-test.c utils.c utils.h
 @HAVE_GTK_TRUE@am_alpha_test_OBJECTS = alpha-test.$(OBJEXT) \
@@ -69,6 +69,9 @@ am__DEPENDENCIES_1 =
 @HAVE_GTK_TRUE@am__DEPENDENCIES_2 = $(TEST_LDADD) \
 @HAVE_GTK_TRUE@	$(am__DEPENDENCIES_1)
 @HAVE_GTK_TRUE@alpha_test_DEPENDENCIES = $(am__DEPENDENCIES_2)
+blitters_test_SOURCES = blitters-test.c
+blitters_test_OBJECTS = blitters-test.$(OBJEXT)
+blitters_test_DEPENDENCIES = $(TEST_LDADD)
 am__clip_in_SOURCES_DIST = clip-in.c utils.c utils.h
 @HAVE_GTK_TRUE@am_clip_in_OBJECTS = clip-in.$(OBJEXT) utils.$(OBJEXT)
 clip_in_OBJECTS = $(am_clip_in_OBJECTS)
@@ -133,13 +136,13 @@ CCLD = $(CC)
 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 	$(LDFLAGS) -o $@
-SOURCES = $(alpha_test_SOURCES) $(clip_in_SOURCES) \
+SOURCES = $(alpha_test_SOURCES) blitters-test.c $(clip_in_SOURCES) \
 	$(clip_test_SOURCES) $(composite_test_SOURCES) \
 	$(convolution_test_SOURCES) fetch-test.c \
 	$(gradient_test_SOURCES) oob-test.c region-test.c \
 	scaling-test.c $(screen_test_SOURCES) trap-crasher.c \
 	$(trap_test_SOURCES) window-test.c
-DIST_SOURCES = $(am__alpha_test_SOURCES_DIST) \
+DIST_SOURCES = $(am__alpha_test_SOURCES_DIST) blitters-test.c \
 	$(am__clip_in_SOURCES_DIST) $(am__clip_test_SOURCES_DIST) \
 	$(am__composite_test_SOURCES_DIST) \
 	$(am__convolution_test_SOURCES_DIST) fetch-test.c \
@@ -163,24 +166,19 @@ CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DEP_CFLAGS = @DEP_CFLAGS@
 DEP_LIBS = @DEP_LIBS@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GREP = @GREP@
 GTK_CFLAGS = @GTK_CFLAGS@
 GTK_LIBS = @GTK_LIBS@
@@ -189,10 +187,12 @@ INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_VERSION_INFO = @LT_VERSION_INFO@
@@ -200,8 +200,12 @@ MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 MMX_CFLAGS = @MMX_CFLAGS@
 MMX_LDFLAGS = @MMX_LDFLAGS@
+NM = @NM@
 NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -229,8 +233,7 @@ abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -261,6 +264,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -279,11 +283,12 @@ top_srcdir = @top_srcdir@
 TEST_LDADD = $(top_builddir)/pixman/libpixman-1.la
 INCLUDES = -I$(top_srcdir)/pixman -I$(top_builddir)/pixman \
 	$(am__append_2)
-TESTPROGRAMS = region-test scaling-test fetch-test oob-test \
-	window-test trap-crasher $(am__append_1)
+TESTPROGRAMS = region-test scaling-test blitters-test fetch-test \
+	oob-test window-test trap-crasher $(am__append_1)
 fetch_test_LDADD = $(TEST_LDADD)
 region_test_LDADD = $(TEST_LDADD)
 scaling_test_LDADD = $(TEST_LDADD)
+blitters_test_LDADD = $(TEST_LDADD)
 trap_crasher_LDADD = $(TEST_LDADD)
 oob_test_LDADD = $(TEST_LDADD)
 window_test_LDADD = $(TEST_LDADD)
@@ -314,8 +319,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
@@ -349,6 +354,9 @@ clean-noinstPROGRAMS:
 alpha-test$(EXEEXT): $(alpha_test_OBJECTS) $(alpha_test_DEPENDENCIES) 
 	@rm -f alpha-test$(EXEEXT)
 	$(LINK) $(alpha_test_OBJECTS) $(alpha_test_LDADD) $(LIBS)
+blitters-test$(EXEEXT): $(blitters_test_OBJECTS) $(blitters_test_DEPENDENCIES) 
+	@rm -f blitters-test$(EXEEXT)
+	$(LINK) $(blitters_test_OBJECTS) $(blitters_test_LDADD) $(LIBS)
 clip-in$(EXEEXT): $(clip_in_OBJECTS) $(clip_in_DEPENDENCIES) 
 	@rm -f clip-in$(EXEEXT)
 	$(LINK) $(clip_in_OBJECTS) $(clip_in_LDADD) $(LIBS)
@@ -396,6 +404,7 @@ distclean-compile:
 	-rm -f *.tab.c
 
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alpha-test.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blitters-test.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clip-in.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clip-test.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/composite-test.Po@am__quote@
@@ -443,7 +452,7 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
diff --git a/pixman/test/blitters-test.c b/pixman/test/blitters-test.c
new file mode 100644
index 000000000..23de6c2f5
--- /dev/null
+++ b/pixman/test/blitters-test.c
@@ -0,0 +1,652 @@
+/*
+ * Test program, which stresses the use of different color formats and
+ * compositing operations.
+ *
+ * Just run it without any command line arguments, and it will report either
+ *   "blitters test passed" - everything is ok
+ *   "blitters test failed!" - there is some problem
+ *
+ * In the case of failure, finding the problem involves the following steps:
+ * 1. Get the reference 'blitters-test' binary. It makes sense to disable all
+ *    the cpu specific optimizations in pixman and also configure it with
+ *    '--disable-shared' option. Those who are paranoid can also tweak the
+ *    sources to disable all fastpath functions. The resulting binary
+ *    can be renamed to something like 'blitters-test.ref'.
+ * 2. Compile the buggy binary (also with the '--disable-shared' option).
+ * 3. Run 'ruby blitters-test-bisect.rb ./blitters-test.ref ./blitters-test'
+ * 4. Look at the information about failed case (destination buffer content
+ *    will be shown) and try to figure out what is wrong. Loading
+ *    test program in gdb, specifying failed test number in the command
+ *    line with '-' character prepended and setting breakpoint on
+ *    'pixman_image_composite' function can provide detailed information
+ *    about function arguments
+ */
+#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <config.h>
+#include "pixman.h"
+
+/* A primitive pseudorandom number generator, taken from POSIX.1-2001 example */
+
+static uint32_t lcg_seed;
+
+static inline uint32_t
+lcg_rand (void)
+{
+    lcg_seed = lcg_seed * 1103515245 + 12345;
+    return ((uint32_t)(lcg_seed / 65536) % 32768);
+}
+
+static inline void
+lcg_srand (uint32_t seed)
+{
+    lcg_seed = seed;
+}
+
+static inline uint32_t
+lcg_rand_n (int max)
+{
+    return lcg_rand () % max;
+}
+
+static void *
+aligned_malloc (size_t align, size_t size)
+{
+    void *result;
+
+#ifdef HAVE_POSIX_MEMALIGN
+    posix_memalign (&result, align, size);
+#else
+    result = malloc (size);
+#endif
+
+    return result;
+}
+
+/*----------------------------------------------------------------------------*\
+ *  CRC-32 version 2.0.0 by Craig Bruce, 2006-04-29.
+ *
+ *  This program generates the CRC-32 values for the files named in the
+ *  command-line arguments.  These are the same CRC-32 values used by GZIP,
+ *  PKZIP, and ZMODEM.  The Crc32_ComputeBuf () can also be detached and
+ *  used independently.
+ *
+ *  THIS PROGRAM IS PUBLIC-DOMAIN SOFTWARE.
+ *
+ *  Based on the byte-oriented implementation "File Verification Using CRC"
+ *  by Mark R. Nelson in Dr. Dobb's Journal, May 1992, pp. 64-67.
+ *
+ *  v1.0.0: original release.
+ *  v1.0.1: fixed printf formats.
+ *  v1.0.2: fixed something else.
+ *  v1.0.3: replaced CRC constant table by generator function.
+ *  v1.0.4: reformatted code, made ANSI C.  1994-12-05.
+ *  v2.0.0: rewrote to use memory buffer & static table, 2006-04-29.
+\*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------*\
+ *  NAME:
+ *     Crc32_ComputeBuf () - computes the CRC-32 value of a memory buffer
+ *  DESCRIPTION:
+ *     Computes or accumulates the CRC-32 value for a memory buffer.
+ *     The 'inCrc32' gives a previously accumulated CRC-32 value to allow
+ *     a CRC to be generated for multiple sequential buffer-fuls of data.
+ *     The 'inCrc32' for the first buffer must be zero.
+ *  ARGUMENTS:
+ *     inCrc32 - accumulated CRC-32 value, must be 0 on first call
+ *     buf     - buffer to compute CRC-32 value for
+ *     bufLen  - number of bytes in buffer
+ *  RETURNS:
+ *     crc32 - computed CRC-32 value
+ *  ERRORS:
+ *     (no errors are possible)
+\*----------------------------------------------------------------------------*/
+
+static uint32_t
+compute_crc32 (uint32_t    in_crc32,
+	       const void *buf,
+	       size_t      buf_len)
+{
+    static const uint32_t crc_table[256] = {
+	0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F,
+	0xE963A535, 0x9E6495A3, 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+	0x09B64C2B, 0x7EB17CBD,	0xE7B82D07, 0x90BF1D91, 0x1DB71064, 0x6AB020F2,
+	0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+	0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,	0x14015C4F, 0x63066CD9,
+	0xFA0F3D63, 0x8D080DF5, 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+	0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, 0x35B5A8FA, 0x42B2986C,
+	0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+	0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423,
+	0xCFBA9599, 0xB8BDA50F, 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+	0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, 0x76DC4190, 0x01DB7106,
+	0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+	0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D,
+	0x91646C97, 0xE6635C01, 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+	0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, 0x65B0D9C6, 0x12B7E950,
+	0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+	0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7,
+	0xA4D1C46D, 0xD3D6F4FB, 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+	0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, 0x5005713C, 0x270241AA,
+	0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+	0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81,
+	0xB7BD5C3B, 0xC0BA6CAD, 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+	0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, 0xE3630B12, 0x94643B84,
+	0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+	0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB,
+	0x196C3671, 0x6E6B06E7, 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+	0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, 0xD6D6A3E8, 0xA1D1937E,
+	0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+	0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55,
+	0x316E8EEF, 0x4669BE79, 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+	0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, 0xC5BA3BBE, 0xB2BD0B28,
+	0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+	0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F,
+	0x72076785, 0x05005713, 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+	0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, 0x86D3D2D4, 0xF1D4E242,
+	0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+	0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69,
+	0x616BFFD3, 0x166CCF45, 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+	0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, 0xAED16A4A, 0xD9D65ADC,
+	0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+	0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693,
+	0x54DE5729, 0x23D967BF, 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+	0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+    };
+
+    uint32_t              crc32;
+    unsigned char *       byte_buf;
+    size_t                i;
+
+    /* accumulate crc32 for buffer */
+    crc32 = in_crc32 ^ 0xFFFFFFFF;
+    byte_buf = (unsigned char*) buf;
+
+    for (i = 0; i < buf_len; i++)
+	crc32 = (crc32 >> 8) ^ crc_table[(crc32 ^ byte_buf[i]) & 0xFF];
+
+    return (crc32 ^ 0xFFFFFFFF);
+}
+
+/* perform endian conversion of pixel data */
+static void
+image_endian_swap (pixman_image_t *img, int bpp)
+{
+    int stride = pixman_image_get_stride (img);
+    uint32_t *data = pixman_image_get_data (img);
+    int height = pixman_image_get_height (img);;
+    int i, j;
+
+    /* swap bytes only on big endian systems */
+    volatile uint16_t endian_check_var = 0x1234;
+    if (*(volatile uint8_t *)&endian_check_var != 0x12)
+	return;
+
+    for (i = 0; i < height; i++)
+    {
+	uint8_t *line_data = (uint8_t *)data + stride * i;
+	/* swap bytes only for 16, 24 and 32 bpp for now */
+	switch (bpp)
+	{
+	case 1:
+	    for (j = 0; j < stride; j++)
+	    {
+		line_data[j] =
+		    ((line_data[j] & 0x80) >> 7) |
+		    ((line_data[j] & 0x40) >> 5) |
+		    ((line_data[j] & 0x20) >> 3) |
+		    ((line_data[j] & 0x10) >> 1) |
+		    ((line_data[j] & 0x08) << 1) |
+		    ((line_data[j] & 0x04) << 3) |
+		    ((line_data[j] & 0x02) << 5) |
+		    ((line_data[j] & 0x01) << 7);
+	    }
+	    break;
+	case 4:
+	    for (j = 0; j < stride; j++)
+	    {
+		line_data[j] = (line_data[j] >> 4) | (line_data[j] << 4);
+	    }
+	    break;
+	case 16:
+	    for (j = 0; j + 2 <= stride; j += 2)
+	    {
+		char t1 = line_data[j + 0];
+		char t2 = line_data[j + 1];
+
+		line_data[j + 1] = t1;
+		line_data[j + 0] = t2;
+	    }
+	    break;
+	case 24:
+	    for (j = 0; j + 3 <= stride; j += 3)
+	    {
+		char t1 = line_data[j + 0];
+		char t2 = line_data[j + 1];
+		char t3 = line_data[j + 2];
+
+		line_data[j + 2] = t1;
+		line_data[j + 1] = t2;
+		line_data[j + 0] = t3;
+	    }
+	    break;
+	case 32:
+	    for (j = 0; j + 4 <= stride; j += 4)
+	    {
+		char t1 = line_data[j + 0];
+		char t2 = line_data[j + 1];
+		char t3 = line_data[j + 2];
+		char t4 = line_data[j + 3];
+
+		line_data[j + 3] = t1;
+		line_data[j + 2] = t2;
+		line_data[j + 1] = t3;
+		line_data[j + 0] = t4;
+	    }
+	    break;
+	default:
+	    break;
+	}
+    }
+}
+
+/* Create random image for testing purposes */
+static pixman_image_t *
+create_random_image (pixman_format_code_t *allowed_formats,
+		     int                   max_width,
+		     int                   max_height,
+		     int                   max_extra_stride,
+		     pixman_format_code_t *used_fmt)
+{
+    int n = 0, i, width, height, stride;
+    pixman_format_code_t fmt;
+    uint32_t *buf;
+    pixman_image_t *img;
+
+    while (allowed_formats[n] != -1)
+	n++;
+    fmt = allowed_formats[lcg_rand_n (n)];
+    width = lcg_rand_n (max_width) + 1;
+    height = lcg_rand_n (max_height) + 1;
+    stride = (width * PIXMAN_FORMAT_BPP (fmt) + 7) / 8 +
+	lcg_rand_n (max_extra_stride + 1);
+    stride = (stride + 3) & ~3;
+
+    /* do the allocation */
+    buf = aligned_malloc (64, stride * height);
+
+    /* initialize image with random data */
+    for (i = 0; i < stride * height; i++)
+    {
+	/* generation is biased to having more 0 or 255 bytes as
+	 * they are more likely to be special-cased in code
+	 */
+	*((uint8_t *)buf + i) = lcg_rand_n (4) ? lcg_rand_n (256) :
+	    (lcg_rand_n (2) ? 0 : 255);
+    }
+
+    img = pixman_image_create_bits (fmt, width, height, buf, stride);
+
+    image_endian_swap (img, PIXMAN_FORMAT_BPP (fmt));
+
+    if (used_fmt) *used_fmt = fmt;
+    return img;
+}
+
+/* Free random image, and optionally update crc32 based on its data */
+static uint32_t
+free_random_image (uint32_t initcrc,
+		   pixman_image_t *img,
+		   pixman_format_code_t fmt)
+{
+    uint32_t crc32 = 0;
+    int stride = pixman_image_get_stride (img);
+    uint32_t *data = pixman_image_get_data (img);
+    int height = pixman_image_get_height (img);;
+
+    if (fmt != -1)
+    {
+	/* mask unused 'x' part */
+	if (PIXMAN_FORMAT_BPP (fmt) - PIXMAN_FORMAT_DEPTH (fmt) &&
+	    PIXMAN_FORMAT_DEPTH (fmt) != 0)
+	{
+	    int i;
+	    uint32_t *data = pixman_image_get_data (img);
+	    uint32_t mask = (1 << PIXMAN_FORMAT_DEPTH (fmt)) - 1;
+
+	    for (i = 0; i < 32; i++)
+		mask |= mask << (i * PIXMAN_FORMAT_BPP (fmt));
+
+	    for (i = 0; i < stride * height / 4; i++)
+		data[i] &= mask;
+	}
+
+	/* swap endiannes in order to provide identical results on both big
+	 * and litte endian systems
+	 */
+	image_endian_swap (img, PIXMAN_FORMAT_BPP (fmt));
+	crc32 = compute_crc32 (initcrc, data, stride * height);
+    }
+
+    pixman_image_unref (img);
+    free (data);
+
+    return crc32;
+}
+
+static pixman_op_t op_list[] = {
+    PIXMAN_OP_SRC,
+    PIXMAN_OP_OVER,
+    PIXMAN_OP_ADD,
+    PIXMAN_OP_CLEAR,
+    PIXMAN_OP_SRC,
+    PIXMAN_OP_DST,
+    PIXMAN_OP_OVER,
+    PIXMAN_OP_OVER_REVERSE,
+    PIXMAN_OP_IN,
+    PIXMAN_OP_IN_REVERSE,
+    PIXMAN_OP_OUT,
+    PIXMAN_OP_OUT_REVERSE,
+    PIXMAN_OP_ATOP,
+    PIXMAN_OP_ATOP_REVERSE,
+    PIXMAN_OP_XOR,
+    PIXMAN_OP_ADD,
+    PIXMAN_OP_SATURATE,
+    PIXMAN_OP_DISJOINT_CLEAR,
+    PIXMAN_OP_DISJOINT_SRC,
+    PIXMAN_OP_DISJOINT_DST,
+    PIXMAN_OP_DISJOINT_OVER,
+    PIXMAN_OP_DISJOINT_OVER_REVERSE,
+    PIXMAN_OP_DISJOINT_IN,
+    PIXMAN_OP_DISJOINT_IN_REVERSE,
+    PIXMAN_OP_DISJOINT_OUT,
+    PIXMAN_OP_DISJOINT_OUT_REVERSE,
+    PIXMAN_OP_DISJOINT_ATOP,
+    PIXMAN_OP_DISJOINT_ATOP_REVERSE,
+    PIXMAN_OP_DISJOINT_XOR,
+    PIXMAN_OP_CONJOINT_CLEAR,
+    PIXMAN_OP_CONJOINT_SRC,
+    PIXMAN_OP_CONJOINT_DST,
+    PIXMAN_OP_CONJOINT_OVER,
+    PIXMAN_OP_CONJOINT_OVER_REVERSE,
+    PIXMAN_OP_CONJOINT_IN,
+    PIXMAN_OP_CONJOINT_IN_REVERSE,
+    PIXMAN_OP_CONJOINT_OUT,
+    PIXMAN_OP_CONJOINT_OUT_REVERSE,
+    PIXMAN_OP_CONJOINT_ATOP,
+    PIXMAN_OP_CONJOINT_ATOP_REVERSE,
+    PIXMAN_OP_CONJOINT_XOR,
+    PIXMAN_OP_MULTIPLY,
+    PIXMAN_OP_SCREEN,
+    PIXMAN_OP_OVERLAY,
+    PIXMAN_OP_DARKEN,
+    PIXMAN_OP_LIGHTEN,
+    PIXMAN_OP_COLOR_DODGE,
+    PIXMAN_OP_COLOR_BURN,
+    PIXMAN_OP_HARD_LIGHT,
+    PIXMAN_OP_DIFFERENCE,
+    PIXMAN_OP_EXCLUSION,
+#if 0 /* these use floating point math and are not always bitexact on different platforms */
+    PIXMAN_OP_SOFT_LIGHT,
+    PIXMAN_OP_HSL_HUE,
+    PIXMAN_OP_HSL_SATURATION,
+    PIXMAN_OP_HSL_COLOR,
+    PIXMAN_OP_HSL_LUMINOSITY,
+#endif
+};
+
+static pixman_format_code_t img_fmt_list[] = {
+    PIXMAN_a8r8g8b8,
+    PIXMAN_x8r8g8b8,
+    PIXMAN_r5g6b5,
+    PIXMAN_r3g3b2,
+    PIXMAN_a8,
+    PIXMAN_a8b8g8r8,
+    PIXMAN_x8b8g8r8,
+    PIXMAN_b8g8r8a8,
+    PIXMAN_b8g8r8x8,
+    PIXMAN_r8g8b8,
+    PIXMAN_b8g8r8,
+    PIXMAN_r5g6b5,
+    PIXMAN_b5g6r5,
+    PIXMAN_x2r10g10b10,
+    PIXMAN_a2r10g10b10,
+    PIXMAN_x2b10g10r10,
+    PIXMAN_a2b10g10r10,
+    PIXMAN_a1r5g5b5,
+    PIXMAN_x1r5g5b5,
+    PIXMAN_a1b5g5r5,
+    PIXMAN_x1b5g5r5,
+    PIXMAN_a4r4g4b4,
+    PIXMAN_x4r4g4b4,
+    PIXMAN_a4b4g4r4,
+    PIXMAN_x4b4g4r4,
+    PIXMAN_a8,
+    PIXMAN_r3g3b2,
+    PIXMAN_b2g3r3,
+    PIXMAN_a2r2g2b2,
+    PIXMAN_a2b2g2r2,
+#if 0 /* using these crashes the test */
+    PIXMAN_c8,
+    PIXMAN_g8,
+    PIXMAN_x4c4,
+    PIXMAN_x4g4,
+    PIXMAN_c4,
+    PIXMAN_g4,
+    PIXMAN_g1,
+#endif
+    PIXMAN_x4a4,
+    PIXMAN_a4,
+    PIXMAN_r1g2b1,
+    PIXMAN_b1g2r1,
+    PIXMAN_a1r1g1b1,
+    PIXMAN_a1b1g1r1,
+    PIXMAN_a1,
+    -1
+};
+
+static pixman_format_code_t mask_fmt_list[] = {
+    PIXMAN_a8r8g8b8,
+    PIXMAN_a8,
+    PIXMAN_a4,
+    PIXMAN_a1,
+    -1
+};
+
+
+/*
+ * Composite operation with pseudorandom images
+ */
+uint32_t
+test_composite (uint32_t initcrc, int testnum, int verbose)
+{
+    int i;
+    pixman_image_t *src_img = NULL;
+    pixman_image_t *dst_img = NULL;
+    pixman_image_t *mask_img = NULL;
+    int src_width, src_height;
+    int dst_width, dst_height;
+    int src_stride, dst_stride;
+    int src_x, src_y;
+    int dst_x, dst_y;
+    int w, h;
+    int op;
+    pixman_format_code_t src_fmt, dst_fmt, mask_fmt;
+    uint32_t *dstbuf;
+    uint32_t crc32;
+    int max_width, max_height, max_extra_stride;
+
+    max_width = max_height = 24 + testnum / 10000;
+    max_extra_stride = 4 + testnum / 1000000;
+
+    if (max_width > 256)
+	max_width = 256;
+
+    if (max_height > 16)
+	max_height = 16;
+
+    if (max_extra_stride > 8)
+	max_extra_stride = 8;
+
+    lcg_srand (testnum);
+
+    op = op_list[lcg_rand_n (sizeof (op_list) / sizeof (op_list[0]))];
+
+    if (lcg_rand_n (8))
+    {
+	/* normal image */
+	src_img = create_random_image (img_fmt_list, max_width, max_height,
+				       max_extra_stride, &src_fmt);
+    }
+    else
+    {
+	/* solid case */
+	src_img = create_random_image (img_fmt_list, 1, 1,
+				       max_extra_stride, &src_fmt);
+
+	pixman_image_set_repeat (src_img, PIXMAN_REPEAT_NORMAL);
+    }
+
+    dst_img = create_random_image (img_fmt_list, max_width, max_height,
+				   max_extra_stride, &dst_fmt);
+
+    mask_img = NULL;
+    mask_fmt = -1;
+
+    if (lcg_rand_n (2))
+    {
+	if (lcg_rand_n (2))
+	{
+	    mask_img = create_random_image (mask_fmt_list, max_width, max_height,
+					   max_extra_stride, &mask_fmt);
+	}
+	else
+	{
+	    /* solid case */
+	    mask_img = create_random_image (mask_fmt_list, 1, 1,
+					   max_extra_stride, &mask_fmt);
+	    pixman_image_set_repeat (mask_img, PIXMAN_REPEAT_NORMAL);
+	}
+
+	if (lcg_rand_n (2))
+	    pixman_image_set_component_alpha (mask_img, 1);
+    }
+
+    src_width = pixman_image_get_width (src_img);
+    src_height = pixman_image_get_height (src_img);
+    src_stride = pixman_image_get_stride (src_img);
+
+    dst_width = pixman_image_get_width (dst_img);
+    dst_height = pixman_image_get_height (dst_img);
+    dst_stride = pixman_image_get_stride (dst_img);
+
+    dstbuf = pixman_image_get_data (dst_img);
+
+    src_x = lcg_rand_n (src_width);
+    src_y = lcg_rand_n (src_height);
+    dst_x = lcg_rand_n (dst_width);
+    dst_y = lcg_rand_n (dst_height);
+
+    w = lcg_rand_n (dst_width - dst_x + 1);
+    h = lcg_rand_n (dst_height - dst_y + 1);
+
+    if (verbose)
+    {
+	printf ("op=%d, src_fmt=%08X, dst_fmt=%08X, mask_fmt=%08X\n",
+	    op, src_fmt, dst_fmt, mask_fmt);
+	printf ("src_width=%d, src_height=%d, dst_width=%d, dst_height=%d\n",
+	    src_width, src_height, dst_width, dst_height);
+	printf ("src_x=%d, src_y=%d, dst_x=%d, dst_y=%d\n",
+	    src_x, src_y, dst_x, dst_y);
+	printf ("src_stride=%d, dst_stride=%d\n",
+	    src_stride, dst_stride);
+	printf ("w=%d, h=%d\n", w, h);
+    }
+
+    pixman_image_composite (op, src_img, mask_img, dst_img,
+			    src_x, src_y, src_x, src_y, dst_x, dst_y, w, h);
+
+    if (verbose)
+    {
+	int j;
+
+	printf ("---\n");
+	for (i = 0; i < dst_height; i++)
+	{
+	    for (j = 0; j < dst_stride; j++)
+	    {
+		if (j == (dst_width * PIXMAN_FORMAT_BPP (dst_fmt) + 7) / 8)
+		    printf ("| ");
+
+		printf ("%02X ", *((uint8_t *)dstbuf + i * dst_stride + j));
+	    }
+	    printf ("\n");
+	}
+	printf ("---\n");
+    }
+
+    free_random_image (initcrc, src_img, -1);
+    crc32 = free_random_image (initcrc, dst_img, dst_fmt);
+
+    if (mask_img)
+	free_random_image (initcrc, mask_img, -1);
+
+    return crc32;
+}
+
+int
+main (int argc, char *argv[])
+{
+    int i, n1 = 1, n2 = 0;
+    uint32_t crc = 0;
+    int verbose = getenv ("VERBOSE") != NULL;
+
+    if (argc >= 3)
+    {
+	n1 = atoi (argv[1]);
+	n2 = atoi (argv[2]);
+    }
+    else if (argc >= 2)
+    {
+	n2 = atoi (argv[1]);
+    }
+    else
+    {
+	n1 = 1;
+	n2 = 2000000;
+    }
+
+    if (n2 < 0)
+    {
+	crc = test_composite (0, abs (n2), 1);
+	printf ("crc32=%08X\n", crc);
+    }
+    else
+    {
+	for (i = n1; i <= n2; i++)
+	{
+	    crc = test_composite (crc, i, 0);
+
+	    if (verbose)
+		printf ("%d: %08X\n", i, crc);
+	}
+	printf ("crc32=%08X\n", crc);
+
+	if (n2 == 2000000)
+	{
+	    /* Predefined value for running with all the fastpath functions
+	       disabled. It needs to be updated every time when changes are
+	       introduced to this program or behavior of pixman changes! */
+	    if (crc == 0xFE1244BF)
+	    {
+		printf ("blitters test passed\n");
+	    }
+	    else
+	    {
+		printf ("blitters test failed!\n");
+		return 1;
+	    }
+	}
+    }
+    return 0;
+}
diff --git a/xorg-server/ChangeLog b/xorg-server/ChangeLog
index af04eecf6..73582f3ad 100644
--- a/xorg-server/ChangeLog
+++ b/xorg-server/ChangeLog
@@ -1,3 +1,414 @@
+commit 3044711412d0a08ba65a491bd2441c0c8980f5e2
+Author: Keith Packard <keithp@keithp.com>
+Date:   Tue Aug 25 22:37:16 2009 -0700
+
+    Bump version to 1.6.3.901 (1.6.4 RC1)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d8e48deb212767c4dfce982e6cb9d1b1fce63b96
+Author: Keith Packard <keithp@keithp.com>
+Date:   Tue Aug 25 22:29:25 2009 -0700
+
+    Block signals while delivering XTest events (fixes bug 23100)
+    
+    XTest uses the same event list as all input devices, and input devices
+    use it at SIGIO time. This causes mass confusion when a SIGIO event
+    occurs in the middle of XTest event processing.
+    
+    The master branch has a much different fix, using a separate input
+    queue which reduces latency that may be caused by XTest event queuing;
+    it's a 'nicer' fix in some ways, but this simple fix should solve the
+    problem.
+    
+    Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 76a1839b0a7dcb82e46c43533d252288677c6dbb
+Author: Keith Packard <keithp@keithp.com>
+Date:   Tue Aug 25 18:07:00 2009 -0700
+
+    Ensure that rotation updates happen frequently
+    
+    The smart scheduler is designed to minimize scheduler overhead by
+    increasing the interval between WaitForSomething calls when a single
+    client is running. However, the software rotation code depends on
+    its BlockHandler being invoked for screen updates; the long delays
+    caused by the smart scheduler optimizations means that screen updates
+    can be delayed a long time as well.
+    
+    The change is simple -- prevent the smart scheduler from increasing
+    the scheduling interval while any screen is using software rotation.
+    (cherry picked from commit e7dd1efef408effe52d0bd3d3aa0b5d4ee10ed90)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 31dc4fe0be57da4e9458ee490811fbd92598b7a7
+Author: Keith Packard <keithp@keithp.com>
+Date:   Tue Aug 25 16:58:07 2009 -0700
+
+    Perform rotation redisplay before calling driver block handler (which may flush rendering)
+    
+    The rotation block handler uses regular driver rendering functions to
+    repaint the screen, if those functions queue commands in the driver,
+    it's important that the driver block handler be invoked after the
+    rotated image is drawn.
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+    (cherry picked from commit 1740cda7a37abc7d0a169ab4555b446adaa62211)
+
+commit cebc0a7aa7a368b2ade3a808195d2e738fda83e9
+Author: Keith Packard <keithp@keithp.com>
+Date:   Tue Aug 25 16:54:16 2009 -0700
+
+    xf86_reload_cursors: fix cursor position to eliminate jumping after mode set
+    
+    xf86_reload_cursors restores the cursor to the correct position, but
+    that must adjust for cursor hot spot and frame before calling down to
+    the hardware function, otherwise the cursor jumps to the wrong
+    position until it is repositioned by the user.
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+    (cherry picked from commit 4aab05e3b3231f1ec9795a66a075d17a722634a7)
+
+commit 5848fca11f3c5b65bb6634816c0df6aeb6eda87d
+Author: Michel Dänzer <daenzer@vmware.com>
+Date:   Tue Jun 23 16:45:40 2009 +0200
+
+    glx: Clean up more thoroughly if the drawable of a current context goes away.
+    
+    Fixes crash when restarting compiz, due to cl->currentContexts[x] being stale.
+    (cherry picked from commit 3020b1d43e34fca08cd51f7c7c8ed51497d49ef3)
+
+commit fad2de1cca057586a88fb20ebf9a9964f8e3e298
+Author: Michel Dänzer <daenzer@vmware.com>
+Date:   Thu May 14 11:46:41 2009 +0200
+
+    glx: If a destroyed window is bound to the current context, make it not current.
+    
+    Avoids subsequent crashes due to stale pointers to the DrawableRec, see
+    https://bugs.freedesktop.org/show_bug.cgi?id=21132#c15 and previous comments.
+    
+    Signed-off-by: Michel Dänzer <daenzer@vmware.com>
+    (cherry picked from commit 2075d4bf9e53b8baef0b919da6c44771220cd4a5)
+
+commit a32d717ac64b21e15a5736ae4981cdd32f2da56b
+Author: Richard Hughes <richard@hughsie.com>
+Date:   Mon Aug 17 09:15:32 2009 +0100
+
+    Do not reset lastDeviceEventTime when we do dixSaveScreens
+    
+    When we turn off DPMS with DPMSModeOff and do dixSaveScreens, don't reset the
+    event time else session clients using IDLETIME will be reset.
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+    (cherry picked from commit 6b5978dcf1f7ac3ecc2f22df06f7000f360e2066)
+
+commit 32115e690f43fde619234722aa674ff1ae1b44ae
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Fri Aug 14 11:48:54 2009 +1000
+
+    dix: update the sprite trace for all masters && floating slaves (#23257)
+    
+    When the windows are restructured, CheckMotion needs to be called for all
+    masters and floating slaves to update the spriteTrace.
+    
+    X.Org Bug 23257 <http://bugs.freedesktop.org/show_bug.cgi?id=23257>
+    (cherry picked from commit 6c292d17053eb2a7e7054e51210f423dbc0cb7e8)
+    
+    Tested-by: Thomas Jaeger
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit af7e62a913c3c5b9639b4557b31537853f3f58bb
+Author: Dan Nicholson <dbn.lists@gmail.com>
+Date:   Sun Aug 16 18:07:49 2009 -0700
+
+    xfree86: Link libselinux with Xorg system libraries
+    
+    Put the reference to -lselinux in XORG_SYS_LIBS so it isn't added as a
+    make dependency for libxorg.la. Otherwise, make goes looking for a file
+    -lselinux in the current directory, which it obviously won't find.
+    
+    Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
+    Tested-by: Justin P. Mattock <justinmattock@gmail.com>
+    (cherry picked from commit c73cd3b265c301b8a54ffe484d6c696f2abefb46)
+
+commit 397f7c42cd775f1dbfced58bc1dfaead48e86440
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Fri Aug 14 09:48:45 2009 +1000
+
+    config: don't shutdown the libhal ctx if it failed to initialize (#23213)
+    
+    Regression introduced by b1c3dc6ae226db178420e3b5f297b94afc87c94c.
+    Shutting down the libhal_ctx if the init failed may cause an abort.
+    This can happen if hald is not yet running at server startup.
+    
+    X.Org Bug 23213 <http://bugs.freedesktop.org/show_bug.cgi?id=23213>
+    
+    Tested-by: Stefan Dirsch
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+    (cherry picked from commit 49046088f10cceaea7da97401d742d3fb59371f5)
+
+commit 55c26d8e4d110b689aea9d806e9d4fa7bbbdd32a
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date:   Thu Aug 13 16:37:00 2009 +1000
+
+    Xext: fix up wrong conditions for negative sync transitions.
+    
+    If the counter had a value higher than the trigger value for a negative
+    transition, the trigger value did not get set.
+    
+    The correct sequence of checks is:
+    if (positive transition)
+       if (counter value < trigger value)
+          set up trigger
+    if (negative transition)
+       if (counter value > trigger value)
+          set up trigger
+    
+    Red Hat Bug 501601 <https://bugzilla.redhat.com/show_bug.cgi?id=501601>
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+    (cherry picked from commit db568f9eabf3450d8a023597ff007df355b13ea8)
+
+commit f274e595ed56722450f6ecebad70500c92e50c58
+Author: Keith Packard <keithp@keithp.com>
+Date:   Fri Jul 31 23:37:53 2009 -0700
+
+    Bump release number to 1.6.3
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 55dcfdbbd6a2a4debb717b104c4b54f4a2c76fff
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Tue Jul 28 15:02:37 2009 -0700
+
+    Remove hardcoded gcc -Wall option from configure.ac
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+    (cherry picked from commit 442967c90dd9d8483a56bdc9237c49e33d619126)
+
+commit 4d349b6c333449517913a5e981b4fc3155da4855
+Author: Adam Jackson <ajax@redhat.com>
+Date:   Fri Mar 27 15:56:15 2009 -0400
+
+    selinux: Only activate if policy says to be an object manager
+    (cherry picked from commit 283a081572d8db787c77d09e5ba6bcadebf4f7fe)
+
+commit d0875154f4f4b751264a2f6781500e97409a499b
+Author: Ben Skeggs <bskeggs@redhat.com>
+Date:   Wed May 27 15:24:34 2009 +1000
+
+    quirk: use first detailed timing as preferred for PEA prod 9003 (rh#492359)
+    
+    Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+    (cherry picked from commit 048697ccfa31cf7f7a29afa90a2f702d43efb7d4)
+
+commit c941479ecc2dead9c3deaee2620c9b9518c3da9a
+Author: Rémi Cardona <remi@gentoo.org>
+Date:   Mon Jul 27 12:07:51 2009 +0200
+
+    config: add HAL error checks
+    
+    This patch simplifies error handling in the HAL code and fixes a
+    segfault if libhal_find_device_by_capability() failed.
+    
+    Fixes http://bugs.gentoo.org/278760
+    
+    Based on a patch by Martin von Gagern <Martin.vGagern@gmx.net>
+    
+    Signed-off-by: Rémi Cardona <remi@gentoo.org>
+    Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
+    (cherry picked from commit b1c3dc6ae226db178420e3b5f297b94afc87c94c)
+
+commit 546f913ff5461dd93d4a0b29b24d2267557326c7
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Fri May 8 21:31:01 2009 -0700
+
+    Don't printf NULL pointers on HAL connection error
+    
+    Fixes Solaris bug 6801386 Xorg core dumps on startup if hald not running
+    http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6801386
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+    (cherry picked from commit 1e816065e5ec3b9394dc1fa5815457a664e15fd9)
+
+commit 155cb2f9a376d40b699a72ac3bdede71af1b518f
+Author: Keith Packard <keithp@keithp.com>
+Date:   Sun Jul 26 14:22:35 2009 -0700
+
+    Bump to version 1.6.2.901 (1.6.3 RC1)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 87900645c22d6066fe70190ab838a687808db5c3
+Author: Dave Airlie <airlied@redhat.com>
+Date:   Thu Jun 11 14:21:53 2009 +1000
+
+    xfree86: move didLock assignment down to where the function pointer is valid.
+    
+    crtc->funcs->lock is NULL, so it's no use calling it here. Move it down so
+    it's actually defined before we use it.
+    
+    Introduced with 6f59a8160042ea145514fdcb410f17f33fd437c2.
+    
+    Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
+    (cherry picked from commit 0de58c88aba7ddd69b04f24ab5b2967c359aa69e)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 72c9bc64ff86999a4643663e5699a6547a9e2997
+Author: Benjamin Defnet <benjamin.r.defnet@intel.com>
+Date:   Wed Jun 10 21:35:48 2009 -0700
+
+    randr: fix operation order so that rotation+transform works
+    
+    The matrix multiply to combine rotation and projective transforms was being
+    done in the wrong order.
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+    (cherry picked from commit b2bf67b61c564a4b92a429ca9ad455403161f33a)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7f95d18397757facafcba39e4613b2ed5047c5c4
+Author: Benjamin Defnet <benjamin.r.defnet@intel.com>
+Date:   Mon Jun 8 21:45:42 2009 -0700
+
+    hw/xf86/modes: Set crtc mode/rotation/transform before calling set_mode_major
+    
+    This moves code out of each implementation of set_mode_major and back into
+    the X server. The real feature here is that the transform is now available
+    in the crtc for use by either xf86CrtcRotate or whatever the driver wants to
+    do. Without this change, the transform was lost for drivers providing the
+    set_mode_major interface.
+    
+    Note that users of this API will want to stop smashing the transformPresent
+    field, and could also stop setting mode/x/y/rotation for new enough X servers,
+    but there's no reason to make that change as it will break things when
+    running against older X servers.
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+    Acked-by: Daniel Stone <daniel@fooishbar.org>
+    (cherry picked from commit 6f59a8160042ea145514fdcb410f17f33fd437c2)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit abc89e2c48a88c29f49fe44d03778deab4b1a3b9
+Author: Matthias Hopf <mhopf@suse.de>
+Date:   Tue Mar 10 15:49:49 2009 +0100
+
+    randr: Nuke broken set_origin shortcut
+    
+    Shortcut is impossible to implement this way, because we don't know for sure
+    whether the crtc of an output has changed or not.
+    (cherry picked from commit cadf65a6e190a8952ad3cc216dc9ea55241de91a)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b1eed8970f7c5b07152dbc6b7dcc4c8504aeb67c
+Author: Julien Cristau <jcristau@debian.org>
+Date:   Fri May 22 09:54:38 2009 +0200
+
+    randr: fix server crash in RRGetScreenInfo
+    
+    We don't return rates to randr < 1.1 clients, so don't allocate space
+    for them.  This fixes a FatalError due to not all allocated space being
+    used.
+    
+    X.Org bug#21861 <http://bugs.freedesktop.org/show_bug.cgi?id=21861>
+    
+    Reported-by: Guillaume Quintin <coincoin169g@gmail.com>
+    Signed-off-by: Julien Cristau <jcristau@debian.org>
+    (cherry picked from commit 12e725d08b4cf7dbb7f09b9ec09fa1b621156ea9)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1addf6fe235f8537024140aff56dffb4738701a7
+Author: Keith Packard <keithp@keithp.com>
+Date:   Wed Aug 6 15:26:24 2008 -0700
+
+    Replace dixLookupResource by dixLookupResourceBy{Type,Class}
+    
+    dixLookupResource attempted to automatically detect whether the caller
+    wanted a lookup by-type or by-class, unfortunately, it guessed wrong for
+    RT_NONE. Instead of trying to make the guess better, this patch just reverts
+    the unification and creates separate functions for each operation.
+    (cherry picked from commit f8dd80d13bb5313a11b38b280f8ad3e22f0a6300)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c838a03e891a6fcd2f7b71f727c1b93f7c26e7a7
+Author: Robert Noland <rnoland@2hip.net>
+Date:   Wed Apr 15 12:06:19 2009 -0500
+
+    One = is more than adequate here.  Make is sh safe.
+    (cherry picked from commit b3e3154cce47add97f5561088036ce3b9e7dc937)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 68cb38bed65c49716104eeb345c4b1b85a4b15bc
+Author: Rémi Cardona <remi@gentoo.org>
+Date:   Fri Jul 3 10:51:50 2009 +0200
+
+    configure: libXinerama isn't needed anymore
+    
+    since libXinerama commit 90d4d23bf2e94721149ddc0a80093b10a82e8845 and
+    xineramaproto commit 21477147613c28c968b5e1eb9d8aea7017dd399d, the
+    server no longer needs libXinerama.
+    
+    Signed-off-by: Rémi Cardona <remi@gentoo.org>
+    (cherry picked from commit 2c69deb92e11542f615df0f24fdc03e3b4415475)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ec60f4ca65dbc25f9a40636f5280b1a1ec68407f
+Author: Michel Dänzer <daenzer@vmware.com>
+Date:   Fri Jul 10 20:06:02 2009 +0200
+
+    EXA: Only pass CT_YXBANDED to RECTS_TO_REGION() if that is really true.
+    
+    Fixes http://bugs.freedesktop.org/show_bug.cgi?id=22642 .
+    (cherry picked from commit 35758544813f156eaac28844e693b2a28f6de316)
+    
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b10c4fe343d2339bae4736793939e44a6befaf88
+Author: Kim Woelders <kim@woelders.dk>
+Date:   Sat Jul 11 18:55:17 2009 +0200
+
+    Fix key repeat problem.
+    
+    Signed-off-by: Kim Woelders <kim@woelders.dk>
+
+commit 606f6dba16d42e3546a82a386d5a01087467b511
+Author: Adam Jackson <ajax@redhat.com>
+Date:   Tue Apr 14 10:54:25 2009 -0400
+
+    xdmcp: Don't crash on X -query with more than 255 IP addresses. (#20675)
+    
+    You could be more clever than this, but the wire protocol says this
+    really is an array of not more than 255 ARRAY8, so it's not just a
+    matter of changing the types.
+    
+    (cherry picked from commit 0eb19f9437b7d8c19592e49eedb028771d300d80)
+
+commit 396d3a7762abd0dd84042833b75f2ebf9d100bb0
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Wed Jul 8 11:26:46 2009 -0700
+
+    Fix build of drivers with 1.6.2 when not using --install-libxf86config
+    
+    c859b736d1d23c5dc2f53958b1e76660e6d45018 removed duplicate entries for
+    these from the Makefile, but removed a different set than was done in
+    master branch, causing xf86Parser.h to not be installed, which in turn
+    breaks the build of drivers like -ati, -intel & -nv that use xf86Modes.h,
+    which includes xf86Parser.h
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+    Signed-off-by: Keith Packard <keithp@keithp.com>
+
 commit 6f1aff5a2b45bc2985081abc240a8fed37170386
 Author: Keith Packard <keithp@keithp.com>
 Date:   Mon Jul 6 14:08:31 2009 -0700
diff --git a/xorg-server/Makefile.in b/xorg-server/Makefile.in
index ed2c79240..2b9799ae7 100644
--- a/xorg-server/Makefile.in
+++ b/xorg-server/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -53,6 +55,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES = xorg-server.pc
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -67,23 +70,64 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(aclocaldir)" \
 	"$(DESTDIR)$(pkgconfigdir)"
-aclocalDATA_INSTALL = $(INSTALL_DATA)
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(aclocal_DATA) $(pkgconfig_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
@@ -219,6 +263,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -433,15 +478,15 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -457,9 +502,10 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
 	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 xorg-server.pc: $(top_builddir)/config.status $(srcdir)/xorg-server.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
 
@@ -474,37 +520,43 @@ distclean-libtool:
 install-aclocalDATA: $(aclocal_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(aclocaldir)" || $(MKDIR_P) "$(DESTDIR)$(aclocaldir)"
-	@list='$(aclocal_DATA)'; for p in $$list; do \
+	@list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(aclocalDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(aclocaldir)/$$f'"; \
-	  $(aclocalDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(aclocaldir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \
 	done
 
 uninstall-aclocalDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(aclocal_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(aclocaldir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \
-	done
+	@list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(aclocaldir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(aclocaldir)" && rm -f $$files
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 	done
 
 uninstall-pkgconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
-	done
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -530,7 +582,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -564,16 +616,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -588,7 +640,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -600,7 +652,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -609,36 +661,41 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	test -d $(distdir) || mkdir $(distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -654,29 +711,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -684,11 +756,12 @@ distdir: $(DISTFILES)
 	$(MAKE) $(AM_MAKEFLAGS) \
 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
 	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
@@ -700,6 +773,10 @@ dist-lzma: distdir
 	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
 	$(am__remove_distdir)
 
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -729,6 +806,8 @@ distcheck: dist
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
 	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -740,9 +819,11 @@ distcheck: dist
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
@@ -764,13 +845,15 @@ distcheck: dist
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
@@ -815,6 +898,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
@@ -837,6 +921,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -845,18 +931,28 @@ install-data-am: install-aclocalDATA install-pkgconfigDATA
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -879,26 +975,26 @@ ps-am:
 
 uninstall-am: uninstall-aclocalDATA uninstall-pkgconfigDATA
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-am clean clean-generic \
 	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-zip \
-	distcheck distclean distclean-generic distclean-libtool \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-aclocalDATA \
-	install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-aclocalDATA uninstall-am \
-	uninstall-pkgconfigDATA
+	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
+	dist-zip distcheck distclean distclean-generic \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-aclocalDATA install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-pkgconfigDATA install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-recursive uninstall uninstall-aclocalDATA \
+	uninstall-am uninstall-pkgconfigDATA
 
 
 .PHONY: ChangeLog
@@ -912,6 +1008,7 @@ dist-hook: ChangeLog
 # gross hack
 relink: all
 	$(MAKE) -C hw relink
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/Xext/Makefile.in b/xorg-server/Xext/Makefile.in
index 62a07da95..7581a4de7 100644
--- a/xorg-server/Xext/Makefile.in
+++ b/xorg-server/Xext/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -62,6 +64,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libXext_la_LIBADD =
 am__libXext_la_SOURCES_DIST = bigreq.c geext.c shape.c sleepuntil.c \
@@ -124,6 +127,7 @@ libXextmodule_la_OBJECTS = $(am_libXextmodule_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -141,9 +145,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -279,6 +297,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -521,9 +540,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Xext/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Xext/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Xext/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Xext/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -541,6 +560,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -589,21 +609,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -616,20 +636,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -643,7 +666,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -651,29 +674,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -694,13 +722,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -731,6 +763,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -752,6 +785,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -760,18 +795,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -810,6 +855,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/Xext/saver.c b/xorg-server/Xext/saver.c
index e3da1c44e..c9b2eb3f8 100644
--- a/xorg-server/Xext/saver.c
+++ b/xorg-server/Xext/saver.c
@@ -1060,7 +1060,7 @@ ScreenSaverSetAttributes (ClientPtr client)
 	    }
             else
 	    {	
-		ret = dixLookupResource((pointer *)&pPixmap, pixID, RT_PIXMAP,
+		ret = dixLookupResourceByType((pointer *)&pPixmap, pixID, RT_PIXMAP,
 					client, DixReadAccess);
 		if (ret == Success)
 		{
@@ -1098,7 +1098,7 @@ ScreenSaverSetAttributes (ClientPtr client)
 	    }
 	    else
 	    {	
-		ret = dixLookupResource((pointer *)&pPixmap, pixID, RT_PIXMAP,
+		ret = dixLookupResourceByType((pointer *)&pPixmap, pixID, RT_PIXMAP,
 					client, DixReadAccess);
 		if (ret == Success)
 		{
@@ -1192,7 +1192,7 @@ ScreenSaverSetAttributes (ClientPtr client)
 	    break;
 	case CWColormap:
 	    cmap = (Colormap) *pVlist;
-	    ret = dixLookupResource((pointer *)&pCmap, cmap, RT_COLORMAP,
+	    ret = dixLookupResourceByType((pointer *)&pCmap, cmap, RT_COLORMAP,
 				    client, DixUseAccess);
 	    if (ret != Success)
 	    {
@@ -1216,7 +1216,7 @@ ScreenSaverSetAttributes (ClientPtr client)
 	    }
 	    else
 	    {
-		ret = dixLookupResource((pointer *)&pCursor, cursorID,
+		ret = dixLookupResourceByType((pointer *)&pCursor, cursorID,
 					RT_CURSOR, client, DixUseAccess);
 	    	if (ret != Success)
 	    	{
diff --git a/xorg-server/Xext/security.c b/xorg-server/Xext/security.c
index 318ef6068..f781e2239 100644
--- a/xorg-server/Xext/security.c
+++ b/xorg-server/Xext/security.c
@@ -1025,7 +1025,7 @@ SecurityClientState(CallbackListPtr *pcbl, pointer unused, pointer calldata)
 
     case ClientStateRunning:
 	state->authId = AuthorizationIDOfClient(pci->client);
-	rc = dixLookupResource((pointer *)&pAuth, state->authId,
+	rc = dixLookupResourceByType((pointer *)&pAuth, state->authId,
 			       SecurityAuthorizationResType, serverClient,
 			       DixGetAttrAccess);
 	if (rc == Success) {
@@ -1040,7 +1040,7 @@ SecurityClientState(CallbackListPtr *pcbl, pointer unused, pointer calldata)
 
     case ClientStateGone:
     case ClientStateRetained:
-	rc = dixLookupResource((pointer *)&pAuth, state->authId,
+	rc = dixLookupResourceByType((pointer *)&pAuth, state->authId,
 			       SecurityAuthorizationResType, serverClient,
 			       DixGetAttrAccess);
 	if (rc == Success) {
diff --git a/xorg-server/Xext/shape.c b/xorg-server/Xext/shape.c
index 791e7fa07..565dfdd16 100644
--- a/xorg-server/Xext/shape.c
+++ b/xorg-server/Xext/shape.c
@@ -430,7 +430,7 @@ ProcShapeMask (client)
     if (stuff->src == None)
 	srcRgn = 0;
     else {
-	rc = dixLookupResource((pointer *)&pPixmap, stuff->src, RT_PIXMAP,
+	rc = dixLookupResourceByType((pointer *)&pPixmap, stuff->src, RT_PIXMAP,
 			       client, DixReadAccess);
         if (rc != Success)
 	    return (rc == BadValue) ? BadPixmap : rc;
diff --git a/xorg-server/Xext/sync.c b/xorg-server/Xext/sync.c
index 1b3736644..a006ae95b 100644
--- a/xorg-server/Xext/sync.c
+++ b/xorg-server/Xext/sync.c
@@ -440,7 +440,7 @@ SyncInitTrigger(client, pTrigger, counter, changes)
     {
 	if (counter == None)
 	    pCounter = NULL;
-	else if (Success != (rc = dixLookupResource((pointer *)&pCounter,
+	else if (Success != (rc = dixLookupResourceByType ((pointer *)&pCounter,
 				counter, RTCounter, client, DixReadAccess)))
 	{
 	    client->errorValue = counter;
@@ -1168,28 +1168,24 @@ SyncComputeBracketValues(pCounter, startOver)
 		pnewltval = &psci->bracket_less;
 	    }
 	}
-	else if ( (pTrigger->test_type == XSyncPositiveTransition &&
+	else if (pTrigger->test_type == XSyncNegativeTransition &&
 		   ct != XSyncCounterNeverIncreases)
-		 ||
-		 (pTrigger->test_type == XSyncNegativeTransition &&
+	{
+	    if (XSyncValueGreaterThan(pCounter->value, pTrigger->test_value) &&
+		XSyncValueGreaterThan(pTrigger->test_value, psci->bracket_less))
+	    {
+		psci->bracket_less = pTrigger->test_value;
+		pnewltval = &psci->bracket_less;
+	    }
+	}
+        else if (pTrigger->test_type == XSyncPositiveTransition &&
 		  ct != XSyncCounterNeverDecreases)
-		 )
 	{
-	    if (XSyncValueLessThan(pCounter->value, pTrigger->test_value))
+	    if (XSyncValueLessThan(pCounter->value, pTrigger->test_value) &&
+		XSyncValueLessThan(pTrigger->test_value, psci->bracket_greater))
 	    {
-		if (XSyncValueLessThan(pTrigger->test_value,
-				       psci->bracket_greater))
-		{
-		    psci->bracket_greater = pTrigger->test_value;
-		    pnewgtval = &psci->bracket_greater;
-		}
-		else
-		if (XSyncValueGreaterThan(pTrigger->test_value,
-					  psci->bracket_less))
-		{
-		    psci->bracket_less = pTrigger->test_value;
-		    pnewltval = &psci->bracket_less;
-		}
+		psci->bracket_greater = pTrigger->test_value;
+		pnewgtval = &psci->bracket_greater;
 	    }
 	}
     } /* end for each trigger */
diff --git a/xorg-server/Xext/xselinux.c b/xorg-server/Xext/xselinux.c
index 6c99c2944..3124eb9b7 100644
--- a/xorg-server/Xext/xselinux.c
+++ b/xorg-server/Xext/xselinux.c
@@ -557,7 +557,7 @@ SELinuxLabelInitial(void)
 	SELinuxScreen(NULL, NULL, &srec);
 
 	/* Do the default colormap */
-	dixLookupResource(&unused, screenInfo.screens[i]->defColormap,
+	dixLookupResourceByType(&unused, screenInfo.screens[i]->defColormap,
 			  RT_COLORMAP, serverClient, DixCreateAccess);
     }
 }
@@ -1989,6 +1989,10 @@ SELinuxExtensionInit(INITARGS)
 	return;
     }
 
+    /* Don't init unless there's something to do */
+    if (!security_get_boolean_active("xserver_object_manager"))
+        return;
+
     /* Check SELinux mode in configuration file */
     switch(selinuxEnforcingState) {
     case SELINUX_MODE_DISABLED:
diff --git a/xorg-server/Xext/xtest.c b/xorg-server/Xext/xtest.c
index 3ff02ed91..e5ab7b451 100644
--- a/xorg-server/Xext/xtest.c
+++ b/xorg-server/Xext/xtest.c
@@ -124,8 +124,8 @@ ProcXTestCompareCursor(client)
     else if (stuff->cursor == XTestCurrentCursor)
         pCursor = GetSpriteCursor(ptr);
     else {
-        rc = dixLookupResource((pointer *)&pCursor, stuff->cursor, RT_CURSOR,
-                client, DixReadAccess);
+        rc = dixLookupResourceByType((pointer *)&pCursor, stuff->cursor, RT_CURSOR,
+				     client, DixReadAccess);
         if (rc != Success)
         {
             client->errorValue = stuff->cursor;
@@ -158,7 +158,7 @@ ProcXTestFakeInput(client)
     int numValuators = 0;
     int firstValuator = 0;
     EventListPtr events;
-    int nevents;
+    int nevents = 0;
     int i;
     int base = 0;
     int flags = 0;
@@ -384,6 +384,7 @@ ProcXTestFakeInput(client)
     if (screenIsSaved == SCREEN_SAVER_ON)
         dixSaveScreens(serverClient, SCREEN_SAVER_OFF, ScreenSaverReset);
 
+    OsBlockSignals();
     GetEventList(&events);
     switch(type) {
         case MotionNotify:
@@ -402,7 +403,6 @@ ProcXTestFakeInput(client)
             break;
     }
 
-    OsBlockSignals();
     for (i = 0; i < nevents; i++)
         mieqEnqueue(dev, (events+i)->event);
     OsReleaseSignals();
diff --git a/xorg-server/Xi/Makefile.in b/xorg-server/Xi/Makefile.in
index 1e47a1879..9da131ad2 100644
--- a/xorg-server/Xi/Makefile.in
+++ b/xorg-server/Xi/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libXi_la_LIBADD =
 am_libXi_la_OBJECTS = allowev.lo chgdctl.lo chgfctl.lo chgkbd.lo \
@@ -62,6 +65,7 @@ libXi_la_OBJECTS = $(am_libXi_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -204,6 +208,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -443,9 +448,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Xi/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Xi/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Xi/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Xi/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -463,6 +468,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -522,21 +528,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -559,7 +565,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -567,29 +573,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -610,13 +621,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -644,6 +659,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -665,6 +681,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -673,18 +691,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -722,6 +750,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/Xi/exevents.c b/xorg-server/Xi/exevents.c
index 78cefb4a9..56e1d4439 100644
--- a/xorg-server/Xi/exevents.c
+++ b/xorg-server/Xi/exevents.c
@@ -1351,7 +1351,7 @@ GrabButton(ClientPtr client, DeviceIntPtr dev, BYTE this_device_mode,
     if (rcursor == None)
 	cursor = NullCursor;
     else {
-	rc = dixLookupResource((pointer *)&cursor, rcursor, RT_CURSOR,
+	rc = dixLookupResourceByType((pointer *)&cursor, rcursor, RT_CURSOR,
 			       client, DixUseAccess);
 	if (rc != Success)
 	{
diff --git a/xorg-server/Xi/stubs.c b/xorg-server/Xi/stubs.c
index 80ddd73c0..d01927c73 100644
--- a/xorg-server/Xi/stubs.c
+++ b/xorg-server/Xi/stubs.c
@@ -89,7 +89,7 @@ CloseInputDevice(DeviceIntPtr d, ClientPtr client)
  *
  * Caller:	ProcXListInputDevices
  *
- * This is the implementation-dependent routine to initialize an input 
+ * This is the implementation-dependent routine to initialize an input
  * device to the point that information about it can be listed.
  * Some implementations open all input devices when the server is first
  * initialized, and never close them.  Other implementations open only
@@ -101,12 +101,12 @@ CloseInputDevice(DeviceIntPtr d, ClientPtr client)
  * This procedure should be used by implementations that do not initialize
  * all input devices at server startup.  It should do device-dependent
  * initialization for any devices not previously initialized, and call
- * AddInputDevice for each of those devices so that a DeviceIntRec will be 
+ * AddInputDevice for each of those devices so that a DeviceIntRec will be
  * created for them.
  *
  * The default implementation is to do nothing (assume all input devices
  * are initialized during X server initialization and kept open).
- * The commented-out sample code shows what you might do if you don't want 
+ * The commented-out sample code shows what you might do if you don't want
  * the default.
  *
  */
@@ -115,7 +115,7 @@ void
 AddOtherInputDevices(void)
 {
     /**********************************************************************
-     for each uninitialized device, do something like: 
+     for each uninitialized device, do something like:
 
     DeviceIntPtr dev;
     DeviceProc deviceProc;
@@ -138,7 +138,7 @@ AddOtherInputDevices(void)
  * initialized, and never close them.  Other implementations open only
  * the X pointer and keyboard devices during server initialization,
  * and only open other input devices when some client makes an
- * XOpenDevice request.  This entry point is for the latter type of 
+ * XOpenDevice request.  This entry point is for the latter type of
  * implementation.
  *
  * If the physical device is not already open, do it here.  In this case,
diff --git a/xorg-server/aclocal.m4 b/xorg-server/aclocal.m4
index 4806248d9..cb4698743 100644
--- a/xorg-server/aclocal.m4
+++ b/xorg-server/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,8 +13,8 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
-[m4_warning([this file was generated for autoconf 2.63.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],,
+[m4_warning([this file was generated for autoconf 2.64.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
@@ -8154,10 +8154,10 @@ fi[]dnl
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
+[am__api_version='1.11'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10.2], [],
+m4_if([$1], [1.11], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -8173,7 +8173,7 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.2])dnl
+[AM_AUTOMAKE_VERSION([1.11])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
@@ -8255,14 +8255,14 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 8
+# serial 9
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -8275,6 +8275,7 @@ AC_SUBST([$1_TRUE])dnl
 AC_SUBST([$1_FALSE])dnl
 _AM_SUBST_NOTMAKE([$1_TRUE])dnl
 _AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
@@ -8288,14 +8289,14 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 9
+# serial 10
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -8352,6 +8353,16 @@ AC_CACHE_CHECK([dependency style of $depcc],
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
   fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -8369,7 +8380,17 @@ AC_CACHE_CHECK([dependency style of $depcc],
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -8379,19 +8400,23 @@ AC_CACHE_CHECK([dependency style of $depcc],
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -8455,59 +8480,61 @@ _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 4
+#serial 5
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[# Autoconf 2.62 quotes --file arguments for eval, but not when files
-# are listed without --file.  Let's play safe and only enable the eval
-# if we detect the quoting.
-case $CONFIG_FILES in
-*\'*) eval set x "$CONFIG_FILES" ;;
-*)   set x $CONFIG_FILES ;;
-esac
-shift
-for mf
-do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
   done
-done
+}
 ])# _AM_OUTPUT_DEPENDENCY_COMMANDS
 
 
@@ -8527,13 +8554,13 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 # Do all the work for Automake.                             -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008 Free Software Foundation, Inc.
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 13
+# serial 16
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -8550,7 +8577,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
+[AC_PREREQ([2.62])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -8601,8 +8628,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
@@ -8610,24 +8637,37 @@ AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-                  [_AM_DEPENDENCIES(OBJC)],
-                  [define([AC_PROG_OBJC],
-                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
 
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
@@ -8650,7 +8690,7 @@ for _am_header in $config_headers :; do
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -8661,7 +8701,14 @@ echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_co
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
 AC_SUBST(install_sh)])
 
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
@@ -8688,27 +8735,38 @@ AC_SUBST([am__leading_dot])])
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well.  Anyway, the user
+# can override the default with the --enable/--disable switch.
 AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode  enable make rules and dependencies not useful
+[m4_case(m4_default([$1], [disable]),
+       [enable], [m4_define([am_maintainer_other], [disable])],
+       [disable], [m4_define([am_maintainer_other], [enable])],
+       [m4_define([am_maintainer_other], [enable])
+        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+  AC_ARG_ENABLE([maintainer-mode],
+[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
+      [USE_MAINTAINER_MODE=$enableval],
+      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
   AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
   MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
+  AC_SUBST([MAINT])dnl
 ]
 )
 
@@ -8716,13 +8774,13 @@ AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # AM_MAKE_INCLUDE()
 # -----------------
@@ -8731,7 +8789,7 @@ AC_DEFUN([AM_MAKE_INCLUDE],
 [am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
@@ -8741,24 +8799,24 @@ am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 AC_SUBST([am__include])
 AC_SUBST([am__quote])
@@ -8768,14 +8826,14 @@ rm -f confinc confmf
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 6
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -8792,7 +8850,14 @@ AC_SUBST($1)])
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
@@ -8863,14 +8928,14 @@ AC_DEFUN([_AM_IF_OPTION],
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # AM_SANITY_CHECK
 # ---------------
@@ -8879,16 +8944,29 @@ AC_DEFUN([AM_SANITY_CHECK],
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$[*]" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -8941,18 +9019,25 @@ fi
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006  Free Software Foundation, Inc.
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 2
+
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
 # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 # This macro is traced by Automake.
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
 # Check how to create a tarball.                            -*- Autoconf -*-
 
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.
diff --git a/xorg-server/composite/Makefile.in b/xorg-server/composite/Makefile.in
index 6dec05164..cac2db48e 100644
--- a/xorg-server/composite/Makefile.in
+++ b/xorg-server/composite/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libcomposite_la_LIBADD =
 am_libcomposite_la_OBJECTS = compalloc.lo compext.lo compinit.lo \
@@ -56,6 +59,7 @@ libcomposite_la_OBJECTS = $(am_libcomposite_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -198,6 +202,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -367,9 +372,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  composite/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  composite/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign composite/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign composite/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -387,6 +392,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -413,21 +419,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -450,7 +456,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -458,29 +464,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -501,13 +512,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -535,6 +550,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -556,6 +572,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -564,18 +582,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -613,6 +641,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/composite/compext.c b/xorg-server/composite/compext.c
index c1544021c..4fff20efa 100644
--- a/xorg-server/composite/compext.c
+++ b/xorg-server/composite/compext.c
@@ -144,7 +144,7 @@ ProcCompositeRedirectWindow (ClientPtr client)
     REQUEST(xCompositeRedirectWindowReq);
 
     REQUEST_SIZE_MATCH(xCompositeRedirectWindowReq);
-    rc = dixLookupResource((pointer *)&pWin, stuff->window, RT_WINDOW, client,
+    rc = dixLookupResourceByType((pointer *)&pWin, stuff->window, RT_WINDOW, client,
 			   DixSetAttrAccess|DixManageAccess|DixBlendAccess);
     if (rc != Success)
     {
@@ -162,7 +162,7 @@ ProcCompositeRedirectSubwindows (ClientPtr client)
     REQUEST(xCompositeRedirectSubwindowsReq);
 
     REQUEST_SIZE_MATCH(xCompositeRedirectSubwindowsReq);
-    rc = dixLookupResource((pointer *)&pWin, stuff->window, RT_WINDOW, client,
+    rc = dixLookupResourceByType((pointer *)&pWin, stuff->window, RT_WINDOW, client,
 			   DixSetAttrAccess|DixManageAccess|DixBlendAccess);
     if (rc != Success)
     {
@@ -214,7 +214,7 @@ ProcCompositeCreateRegionFromBorderClip (ClientPtr client)
     REQUEST(xCompositeCreateRegionFromBorderClipReq);
 
     REQUEST_SIZE_MATCH(xCompositeCreateRegionFromBorderClipReq);
-    rc = dixLookupResource((pointer *)&pWin, stuff->window, RT_WINDOW, client,
+    rc = dixLookupResourceByType((pointer *)&pWin, stuff->window, RT_WINDOW, client,
 			   DixGetAttrAccess);
     if (rc != Success)
     {
@@ -250,7 +250,7 @@ ProcCompositeNameWindowPixmap (ClientPtr client)
     REQUEST(xCompositeNameWindowPixmapReq);
 
     REQUEST_SIZE_MATCH(xCompositeNameWindowPixmapReq);
-    rc = dixLookupResource((pointer *)&pWin, stuff->window, RT_WINDOW, client,
+    rc = dixLookupResourceByType((pointer *)&pWin, stuff->window, RT_WINDOW, client,
 			   DixGetAttrAccess);
     if (rc != Success)
     {
@@ -298,7 +298,7 @@ ProcCompositeGetOverlayWindow (ClientPtr client)
     int rc;
 
     REQUEST_SIZE_MATCH(xCompositeGetOverlayWindowReq);
-    rc = dixLookupResource((pointer *)&pWin, stuff->window, RT_WINDOW, client,
+    rc = dixLookupResourceByType((pointer *)&pWin, stuff->window, RT_WINDOW, client,
 			   DixGetAttrAccess);
     if (rc != Success)
     {
diff --git a/xorg-server/config.guess b/xorg-server/config.guess
index da8331460..e3a2116a7 100644
--- a/xorg-server/config.guess
+++ b/xorg-server/config.guess
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
 #   Free Software Foundation, Inc.
 
-timestamp='2009-04-27'
+timestamp='2009-06-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -170,7 +170,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
+			| grep -q __ELF__
 		then
 		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
 		    # Return netbsd for either.  FIX?
@@ -656,7 +656,7 @@ EOF
 	    # => hppa64-hp-hpux11.23
 
 	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep __LP64__ >/dev/null
+		grep -q __LP64__
 	    then
 		HP_ARCH="hppa2.0w"
 	    else
@@ -822,6 +822,9 @@ EOF
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
@@ -882,40 +885,17 @@ EOF
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    mips:Linux:*:*)
+    mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#undef CPU
-	#undef mips
-	#undef mipsel
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
 	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
+	CPU=${UNAME_MACHINE}el
 	#else
 	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
+	CPU=${UNAME_MACHINE}
 	#else
 	CPU=
 	#endif
@@ -947,7 +927,7 @@ EOF
 	  EV67)  UNAME_MACHINE=alphaev67 ;;
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
         esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	objdump --private-headers /bin/sh | grep -q ld.so.1
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit ;;
@@ -1001,14 +981,6 @@ EOF
 	  elf32-i386)
 		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
 		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
@@ -1074,7 +1046,7 @@ EOF
     i*86:syllable:*:*)
 	echo ${UNAME_MACHINE}-pc-syllable
 	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
     i*86:*DOS:*:*)
@@ -1182,7 +1154,7 @@ EOF
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
     SM[BE]S:UNIX_SV:*:*)
diff --git a/xorg-server/config.sub b/xorg-server/config.sub
index a39437d01..eb0389a69 100644
--- a/xorg-server/config.sub
+++ b/xorg-server/config.sub
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
 #   Free Software Foundation, Inc.
 
-timestamp='2009-04-17'
+timestamp='2009-06-11'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -153,6 +153,9 @@ case $os in
 		os=
 		basic_machine=$1
 		;;
+        -bluegene*)
+	        os=-cnk
+		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
 		basic_machine=$1
@@ -467,6 +470,10 @@ case $basic_machine in
 		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
@@ -1260,7 +1267,7 @@ case $os in
 	# Each alternative MUST END IN A *, to match a version number.
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
 	      | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
@@ -1613,7 +1620,7 @@ case $basic_machine in
 			-sunos*)
 				vendor=sun
 				;;
-			-aix*)
+			-cnk*|-aix*)
 				vendor=ibm
 				;;
 			-beos*)
diff --git a/xorg-server/config/Makefile.in b/xorg-server/config/Makefile.in
index 3a77e759f..aad49d11d 100644
--- a/xorg-server/config/Makefile.in
+++ b/xorg-server/config/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -53,6 +55,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libconfig_a_AR = $(AR) $(ARFLAGS)
@@ -68,6 +71,7 @@ libconfig_a_OBJECTS = $(am_libconfig_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -81,9 +85,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(dbusconfigdir)"
-dbusconfigDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dbusconfig_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -219,6 +237,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -385,9 +404,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  config/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  config/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign config/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign config/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -405,6 +424,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -426,21 +446,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -453,20 +473,23 @@ clean-libtool:
 install-dbusconfigDATA: $(dbusconfig_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(dbusconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(dbusconfigdir)"
-	@list='$(dbusconfig_DATA)'; for p in $$list; do \
+	@list='$(dbusconfig_DATA)'; test -n "$(dbusconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(dbusconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(dbusconfigdir)/$$f'"; \
-	  $(dbusconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(dbusconfigdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dbusconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dbusconfigdir)" || exit $$?; \
 	done
 
 uninstall-dbusconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(dbusconfig_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(dbusconfigdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(dbusconfigdir)/$$f"; \
-	done
+	@list='$(dbusconfig_DATA)'; test -n "$(dbusconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(dbusconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(dbusconfigdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -480,7 +503,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -488,29 +511,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -531,13 +559,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -568,6 +600,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -589,6 +622,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -597,18 +632,28 @@ install-data-am: install-dbusconfigDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -647,6 +692,7 @@ uninstall-am: uninstall-dbusconfigDATA
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am uninstall-dbusconfigDATA
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/config/hal.c b/xorg-server/config/hal.c
index 36fa839fb..28f55a02f 100644
--- a/xorg-server/config/hal.c
+++ b/xorg-server/config/hal.c
@@ -474,13 +474,13 @@ connect_and_register(DBusConnection *connection, struct config_hal_info *info)
     char **devices;
     int num_devices, i;
 
+    if (info->hal_ctx)
+        return TRUE; /* already registered, pretend we did something */
+
     info->system_bus = connection;
 
     dbus_error_init(&error);
 
-    if (info->hal_ctx)
-        return TRUE; /* already registered, pretend we did something */
-
     info->hal_ctx = libhal_ctx_new();
     if (!info->hal_ctx) {
         LogMessage(X_ERROR, "config/hal: couldn't create HAL context\n");
@@ -489,17 +489,19 @@ connect_and_register(DBusConnection *connection, struct config_hal_info *info)
 
     if (!libhal_ctx_set_dbus_connection(info->hal_ctx, info->system_bus)) {
         LogMessage(X_ERROR, "config/hal: couldn't associate HAL context with bus\n");
-        goto out_ctx;
+        goto out_err;
     }
     if (!libhal_ctx_init(info->hal_ctx, &error)) {
         LogMessage(X_ERROR, "config/hal: couldn't initialise context: %s (%s)\n",
-               error.name, error.message);
-        goto out_ctx;
+		   error.name ? error.name : "unknown error",
+		   error.message ? error.message : "null");
+        goto out_err;
     }
     if (!libhal_device_property_watch_all(info->hal_ctx, &error)) {
         LogMessage(X_ERROR, "config/hal: couldn't watch all properties: %s (%s)\n",
-               error.name, error.message);
-        goto out_ctx2;
+		   error.name ? error.name : "unknown error",
+		   error.message ? error.message : "null");
+        goto out_ctx;
     }
     libhal_ctx_set_device_added(info->hal_ctx, device_added);
     libhal_ctx_set_device_removed(info->hal_ctx, device_removed);
@@ -507,6 +509,12 @@ connect_and_register(DBusConnection *connection, struct config_hal_info *info)
     devices = libhal_find_device_by_capability(info->hal_ctx, "input",
                                                &num_devices, &error);
     /* FIXME: Get default devices if error is set. */
+    if (dbus_error_is_set(&error)) {
+        LogMessage(X_ERROR, "config/hal: couldn't find input device: %s (%s)\n",
+		   error.name ? error.name : "unknown error",
+		   error.message ? error.message : "null");
+        goto out_ctx;
+    }
     for (i = 0; i < num_devices; i++)
         device_added(info->hal_ctx, devices[i]);
     libhal_free_string_array(devices);
@@ -515,15 +523,23 @@ connect_and_register(DBusConnection *connection, struct config_hal_info *info)
 
     return TRUE;
 
-out_ctx2:
-    if (!libhal_ctx_shutdown(info->hal_ctx, &error))
-        LogMessage(X_WARNING, "config/hal: couldn't shut down context: %s (%s)\n",
-               error.name, error.message);
 out_ctx:
-    libhal_ctx_free(info->hal_ctx);
+    dbus_error_free(&error);
+
+    if (!libhal_ctx_shutdown(info->hal_ctx, &error)) {
+        LogMessage(X_WARNING, "config/hal: couldn't shut down context: %s (%s)\n",
+                error.name ? error.name : "unknown error",
+                error.message ? error.message : "null");
+        dbus_error_free(&error);
+    }
+
 out_err:
     dbus_error_free(&error);
 
+    if (info->hal_ctx) {
+        libhal_ctx_free(info->hal_ctx);
+    }
+
     info->hal_ctx = NULL;
     info->system_bus = NULL;
 
diff --git a/xorg-server/configure b/xorg-server/configure
index ff62b31d1..5a147107d 100644
--- a/xorg-server/configure
+++ b/xorg-server/configure
@@ -1,20 +1,22 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for xorg-server 1.6.2.
+# Generated by GNU Autoconf 2.64 for xorg-server 1.6.3.901.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
 
 # Be more Bourne compatible
 DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
   # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -22,23 +24,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
 esac
-
 fi
 
 
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
 as_nl='
 '
 export as_nl
@@ -46,7 +40,13 @@ export as_nl
 as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
   as_echo='printf %s\n'
   as_echo_n='printf %s'
 else
@@ -57,7 +57,7 @@ else
     as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
     as_echo_n_body='eval
       arg=$1;
-      case $arg in
+      case $arg in #(
       *"$as_nl"*)
 	expr "X$arg" : "X\\(.*\\)$as_nl";
 	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -80,13 +80,6 @@ if test "${PATH_SEPARATOR+set}" != set; then
   }
 fi
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
 
 # IFS
 # We need space, tab and new line, in precisely that order.  Quoting is
@@ -96,15 +89,15 @@ fi
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
 IFS=$as_save_IFS
 
      ;;
@@ -116,12 +109,16 @@ if test "x$as_myself" = x; then
 fi
 if test ! -f "$as_myself"; then
   $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
+  exit 1
 fi
 
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
 done
 PS1='$ '
 PS2='> '
@@ -133,330 +130,301 @@ export LC_ALL
 LANGUAGE=C
 export LANGUAGE
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
 # CDPATH.
-$as_unset CDPATH
-
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test "x$CONFIG_SHELL" = x; then
-  if (eval ":") 2>/dev/null; then
-  as_have_required=yes
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
 else
-  as_have_required=no
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-
-  if test $as_have_required = yes &&	 (eval ":
-(as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
 
 exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
 else
-  exitcode=1
-  echo positional parameters were not saved.
+  as_have_required=no
 fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
 
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=\$LINENO
-  as_lineno_2=\$LINENO
-  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
-  :
 else
-  as_candidate_shells=
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  case $as_dir in
+  as_found=:
+  case $as_dir in #(
 	 /*)
 	   for as_base in sh bash ksh sh5; do
-	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
 	   done;;
        esac
+  as_found=false
 done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
 IFS=$as_save_IFS
 
 
-      for as_shell in $as_candidate_shells $SHELL; do
-	 # Try only shells that exist, to save several forks.
-	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
-  CONFIG_SHELL=$as_shell
-	       as_have_required=yes
-	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
-  (exit $1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
-  break
-fi
-
-fi
-
-      done
-
-      if test "x$CONFIG_SHELL" != x; then
-  for as_var in BASH_ENV ENV
-	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-	done
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
 	export CONFIG_SHELL
 	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
-
-    if test $as_have_required = no; then
-  echo This script requires a shell more modern than all the
-      echo shells that I found on your system.  Please install a
-      echo modern shell, or manually run the script under such a
-      echo shell if you do have one.
-      { (exit 1); exit 1; }
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
+$0: about your system, including any error possibly output
+$0: before this message. Then install a modern shell, or
+$0: manually run the script under such a shell if you do
+$0: have one."
+  fi
+  exit 1
 fi
-
-
 fi
-
 fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
 
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
 
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
 
-(eval "as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
 
-exitcode=0
-if as_func_success; then
-  :
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
 else
-  exitcode=1
-  echo as_func_success failed.
-fi
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
 
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
 
-if as_func_ret_success; then
-  :
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
 else
-  exitcode=1
-  echo as_func_ret_success failed.
+  as_expr=false
 fi
 
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
 fi
 
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
 else
-  exitcode=1
-  echo positional parameters were not saved.
+  as_dirname=false
 fi
 
-test \$exitcode = 0") || {
-  echo No shell found that supports shell functions.
-  echo Please tell bug-autoconf@gnu.org about your system,
-  echo including any error possibly output before this message.
-  echo This can help us improve future autoconf versions.
-  echo Configuration will now proceed without shell functions.
-}
-
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
   sed -n '
     p
     /[$]LINENO/=
@@ -473,8 +441,7 @@ test \$exitcode = 0") || {
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
@@ -484,29 +451,18 @@ test \$exitcode = 0") || {
   exit
 }
 
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
 ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
 -n*)
-  case `echo 'x\c'` in
+  case `echo 'xy\c'` in
   *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
   esac;;
 *)
   ECHO_N='-n';;
 esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
 
 rm -f conf$$ conf$$.exe conf$$.file
 if test -d conf$$.dir; then
@@ -536,7 +492,7 @@ rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
@@ -555,10 +511,10 @@ else
       if test -d "$1"; then
 	test -d "$1/.";
       else
-	case $1 in
+	case $1 in #(
 	-*)set "./$1";;
 	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
 	???[sx]*):;;*)false;;esac;fi
     '\'' sh
   '
@@ -573,7 +529,6 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
 
-
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
@@ -740,14 +695,14 @@ cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 
 # Identity of this package.
 PACKAGE_NAME='xorg-server'
 PACKAGE_TARNAME='xorg-server'
-PACKAGE_VERSION='1.6.2'
-PACKAGE_STRING='xorg-server 1.6.2'
+PACKAGE_VERSION='1.6.3.901'
+PACKAGE_STRING='xorg-server 1.6.3.901'
 PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
+PACKAGE_URL=''
 
 ac_unique_file="Makefile.am"
 # Factoring default headers for most tests.
@@ -786,7 +741,9 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='LTLIBOBJS
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
 LIBOBJS
 ADMIN_MAN_DIR
 DRIVER_MAN_DIR
@@ -1242,6 +1199,7 @@ bindir
 program_transform_name
 prefix
 exec_prefix
+PACKAGE_URL
 PACKAGE_BUGREPORT
 PACKAGE_STRING
 PACKAGE_VERSION
@@ -1513,8 +1471,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1540,8 +1497,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1745,8 +1701,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1762,8 +1717,7 @@ do
     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1793,17 +1747,17 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
+  -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
     ;;
 
   *=*)
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+    esac
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
@@ -1820,15 +1774,13 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "missing argument to $ac_option"
 fi
 
 if test -n "$ac_unrecognized_opts"; then
   case $enable_option_checking in
     no) ;;
-    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
-   { (exit 1); exit 1; }; } ;;
+    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
     *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
 fi
@@ -1851,8 +1803,7 @@ do
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -1882,11 +1833,9 @@ test "$silent" = yes && exec 6>/dev/null
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { $as_echo "$as_me: error: working directory cannot be determined" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "working directory cannot be determined"
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "pwd does not report name of working directory"
 
 
 # Find the source files, if location was not specified.
@@ -1925,13 +1874,11 @@ else
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
-   { (exit 1); exit 1; }; }
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
 	pwd)`
 # When building in place, set srcdir=.
 if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1957,7 +1904,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures xorg-server 1.6.2 to adapt to many kinds of systems.
+\`configure' configures xorg-server 1.6.3.901 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -2027,7 +1974,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of xorg-server 1.6.2:";;
+     short | recursive ) echo "Configuration of xorg-server 1.6.3.901:";;
    esac
   cat <<\_ACEOF
 
@@ -2333,22 +2280,650 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-xorg-server configure 1.6.2
-generated by GNU Autoconf 2.63
+xorg-server configure 1.6.3.901
+generated by GNU Autoconf 2.64
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
   exit
 fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( cat <<\_ASBOX
+## ---------------------------------------------------------------------- ##
+## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
+## ---------------------------------------------------------------------- ##
+_ASBOX
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
+# --------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_c_compute_int ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if test "$cross_compiling" = yes; then
+    # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid; break
+else
+  as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=$ac_mid; break
+else
+  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid
+else
+  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+  else
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    return 1;
+  if (($2) < 0)
+    {
+      long int i = longval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%ld", i);
+    }
+  else
+    {
+      unsigned long int i = ulongval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%lu", i);
+    }
+  /* Do not output a trailing newline, as this causes \r\n confusion
+     on some platforms.  */
+  return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+  ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+
+  fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_compute_int
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR
+# ------------------------------------
+# Tests whether SYMBOL is declared, setting cache variable VAR accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
+$as_echo_n "checking whether $2 is declared... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $2
+  (void) $2;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_decl
 cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by xorg-server $as_me 1.6.2, which was
-generated by GNU Autoconf 2.63.  Invocation command line was
+It was created by xorg-server $as_me 1.6.3.901, which was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
   $ $0 $@
 
@@ -2384,8 +2959,8 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  $as_echo "PATH: $as_dir"
-done
+    $as_echo "PATH: $as_dir"
+  done
 IFS=$as_save_IFS
 
 } >&5
@@ -2422,9 +2997,9 @@ do
       ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
     2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      as_fn_append ac_configure_args1 " '$ac_arg'"
       if test $ac_must_keep_next = true; then
 	ac_must_keep_next=false # Got value, back to normal.
       else
@@ -2440,13 +3015,13 @@ do
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args '$ac_arg'"
+      as_fn_append ac_configure_args " '$ac_arg'"
       ;;
     esac
   done
 done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
 
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
@@ -2471,13 +3046,13 @@ _ASBOX
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
       BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) $as_unset $ac_var ;;
+      *) { eval $ac_var=; unset $ac_var;} ;;
       esac ;;
     esac
   done
@@ -2549,39 +3124,41 @@ _ASBOX
     exit $exit_status
 ' 0
 for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
 rm -f -r conftest* confdefs.h
 
+$as_echo "/* confdefs.h */" > confdefs.h
+
 # Predefined preprocessor variables.
 
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_NAME "$PACKAGE_NAME"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_VERSION "$PACKAGE_VERSION"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_STRING "$PACKAGE_STRING"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
 _ACEOF
 
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
 
 # Let the site file select an alternate cache file if it wants to.
 # Prefer an explicitly selected file to automatically selected ones.
@@ -2600,7 +3177,7 @@ for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 do
   test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
 $as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
@@ -2611,7 +3188,7 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
 $as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
       [\\/]* | ?:[\\/]* ) . "$cache_file";;
@@ -2619,7 +3196,7 @@ $as_echo "$as_me: loading cache $cache_file" >&6;}
     esac
   fi
 else
-  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
 $as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
@@ -2634,11 +3211,11 @@ for ac_var in $ac_precious_vars; do
   eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
@@ -2648,17 +3225,17 @@ $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
 	ac_old_val_w=`echo x $ac_old_val`
 	ac_new_val_w=`echo x $ac_new_val`
 	if test "$ac_old_val_w" != "$ac_new_val_w"; then
-	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
 	  ac_cache_corrupted=:
 	else
-	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
 	  eval $ac_var=\$ac_old_val
 	fi
-	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
 $as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
-	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
 $as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
@@ -2670,43 +3247,20 @@ $as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
     esac
     case " $ac_configure_args " in
       *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
     esac
   fi
 done
 if $ac_cache_corrupted; then
-  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -2716,28 +3270,20 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-am__api_version='1.10'
+am__api_version='1.11'
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
+  for ac_t in install-sh install.sh shtool; do
+    if test -f "$ac_dir/$ac_t"; then
+      ac_aux_dir=$ac_dir
+      ac_install_sh="$ac_aux_dir/$ac_t -c"
+      break 2
+    fi
+  done
 done
 if test -z "$ac_aux_dir"; then
-  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
 fi
 
 # These three variables are undocumented and unsupported,
@@ -2763,10 +3309,10 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
 # Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
 $as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
+if test "${ac_cv_path_install+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2774,11 +3320,11 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
   /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
   /usr/ucb/* ) ;;
   *)
     # OSF1 and SCO ODT 3.0 have their own names for install.
@@ -2815,7 +3361,7 @@ case $as_dir/ in
     ;;
 esac
 
-done
+  done
 IFS=$as_save_IFS
 
 rm -rf conftest.one conftest.two conftest.dir
@@ -2831,7 +3377,7 @@ fi
     INSTALL=$ac_install_sh
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
 $as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -2842,21 +3388,34 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$*" != "X $srcdir/configure conftest.file" \
@@ -2866,11 +3425,8 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&5
-$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&2;}
-   { (exit 1); exit 1; }; }
+      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
    fi
 
    test "$2" = conftest.file
@@ -2879,13 +3435,10 @@ then
    # Ok.
    :
 else
-   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-$as_echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
-   { (exit 1); exit 1; }; }
+   as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
 fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
@@ -2900,20 +3453,136 @@ program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then
+  if test "${ac_cv_path_mkdir+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2921,7 +3590,7 @@ for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in mkdir gmkdir; do
+    for ac_prog in mkdir gmkdir; do
 	 for ac_exec_ext in '' $ac_executable_extensions; do
 	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
@@ -2933,7 +3602,7 @@ do
 	   esac
 	 done
        done
-done
+  done
 IFS=$as_save_IFS
 
 fi
@@ -2949,7 +3618,7 @@ fi
     MKDIR_P="$ac_install_sh -d"
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
 mkdir_p="$MKDIR_P"
@@ -2962,9 +3631,9 @@ for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
+if test "${ac_cv_prog_AWK+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -2975,24 +3644,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
 $as_echo "$AWK" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3000,11 +3669,11 @@ fi
   test -n "$AWK" && break
 done
 
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -3022,11 +3691,11 @@ esac
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
@@ -3046,9 +3715,7 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
   fi
 fi
 
@@ -3064,7 +3731,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='xorg-server'
- VERSION='1.6.2'
+ VERSION='1.6.3.901'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -3092,108 +3759,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 # Always define AMTAR for backward compatibility.
@@ -3206,16 +3771,17 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
 
 
-{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
     # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
+if test "${enable_maintainer_mode+set}" = set; then :
   enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 else
   USE_MAINTAINER_MODE=no
 fi
 
-  { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
 $as_echo "$USE_MAINTAINER_MODE" >&6; }
    if test $USE_MAINTAINER_MODE = yes; then
   MAINTAINER_MODE_TRUE=
@@ -3229,7 +3795,7 @@ fi
 
 
 
-RELEASE_DATE="2009-7-7"
+RELEASE_DATE="2009-8-25"
 
 ac_config_headers="$ac_config_headers include/do-not-use-config.h"
 
@@ -3254,9 +3820,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3267,24 +3833,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3294,9 +3860,9 @@ if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3307,24 +3873,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
 $as_echo "$ac_ct_CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3333,7 +3899,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -3347,9 +3913,9 @@ if test -z "$CC"; then
           if test -n "$ac_tool_prefix"; then
     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3360,24 +3926,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3387,9 +3953,9 @@ fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3401,18 +3967,18 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
      fi
     ac_cv_prog_CC="cc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
@@ -3431,10 +3997,10 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3446,9 +4012,9 @@ if test -z "$CC"; then
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3459,24 +4025,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3490,9 +4056,9 @@ if test -z "$CC"; then
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3503,24 +4069,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
 $as_echo "$ac_ct_CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3533,7 +4099,7 @@ done
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -3544,73 +4110,55 @@ fi
 fi
 
 
-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
 
 # Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
 set X $ac_compile
 ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
+#include <stdio.h>
 int
 main ()
 {
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
 
   ;
   return 0;
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
 $as_echo_n "checking for C compiler default output file name... " >&6; }
 ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
 
@@ -3627,17 +4175,17 @@ do
 done
 rm -f $ac_rmfiles
 
-if { (ac_try="$ac_link_default"
+if { { ac_try="$ac_link_default"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_link_default") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
 # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
 # in a Makefile.  We should not override ac_cv_exeext if it was cached,
@@ -3654,7 +4202,7 @@ do
 	# certainly right.
 	break;;
     *.* )
-        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
 	then :; else
 	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
 	fi
@@ -3673,84 +4221,75 @@ test "$ac_cv_exeext" = no && ac_cv_exeext=
 else
   ac_file=''
 fi
-
-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
 $as_echo "$ac_file" >&6; }
-if test -z "$ac_file"; then
+if test -z "$ac_file"; then :
   $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }; }
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
 fi
-
 ac_exeext=$ac_cv_exeext
 
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
 $as_echo_n "checking whether the C compiler works... " >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (case "(($ac_try" in
+  { { case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
     cross_compiling=no
   else
     if test "$cross_compiling" = maybe; then
 	cross_compiling=yes
     else
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
+as_fn_error "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
     fi
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
 ac_clean_files=$ac_clean_files_save
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
 $as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
 $as_echo "$cross_compiling" >&6; }
 
-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
 $as_echo_n "checking for suffix of executables... " >&6; }
-if { (ac_try="$ac_link"
+if { { ac_try="$ac_link"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_link") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   # If both `conftest.exe' and `conftest' are `present' (well, observable)
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
 # work properly (i.e., refer to `conftest.exe'), while it won't with
@@ -3765,32 +4304,24 @@ for ac_file in conftest.exe conftest conftest.*; do
   esac
 done
 else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest$ac_cv_exeext
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
 $as_echo "$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 $as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then
+if test "${ac_cv_objext+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3802,17 +4333,17 @@ main ()
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
+if { { ac_try="$ac_compile"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_compile") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   for ac_file in conftest.o conftest.obj conftest.*; do
   test -f "$ac_file" || continue;
   case $ac_file in
@@ -3825,31 +4356,23 @@ else
   $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
 $as_echo "$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3863,37 +4386,16 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_compiler_gnu=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
+  ac_compiler_gnu=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
 $as_echo "$ac_cv_c_compiler_gnu" >&6; }
 if test $ac_compiler_gnu = yes; then
   GCC=yes
@@ -3902,20 +4404,16 @@ else
 fi
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
 $as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
+if test "${ac_cv_prog_cc_g+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
    ac_c_werror_flag=yes
    ac_cv_prog_cc_g=no
    CFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3926,35 +4424,11 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3965,36 +4439,12 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_compile "$LINENO"; then :
 
-	ac_c_werror_flag=$ac_save_c_werror_flag
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
 	 CFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4005,42 +4455,17 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
 $as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
@@ -4057,18 +4482,14 @@ else
     CFLAGS=
   fi
 fi
-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
@@ -4125,32 +4546,9 @@ for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
 	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_c89=$ac_arg
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext
   test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
@@ -4161,17 +4559,19 @@ fi
 # AC_CACHE_VAL
 case "x$ac_cv_prog_cc_c89" in
   x)
-    { $as_echo "$as_me:$LINENO: result: none needed" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
 $as_echo "none needed" >&6; } ;;
   xno)
-    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
 $as_echo "unsupported" >&6; } ;;
   *)
     CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
 esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
 
+fi
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -4186,44 +4586,44 @@ ac_config_commands="$ac_config_commands depfiles"
 am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
 $as_echo_n "checking for style of include used by $am_make... " >&6; }
 am__include="#"
 am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 
 
-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
 $as_echo "$_am_result" >&6; }
 rm -f confinc confmf
 
 # Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
+if test "${enable_dependency_tracking+set}" = set; then :
   enableval=$enable_dependency_tracking;
 fi
 
@@ -4243,9 +4643,9 @@ fi
 
 depcc="$CC"   am_compiler_list=
 
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4271,6 +4671,11 @@ else
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -4288,7 +4693,17 @@ else
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -4298,19 +4713,23 @@ else
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -4334,7 +4753,7 @@ else
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
@@ -4358,9 +4777,9 @@ test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
 
 depcc="$CCAS"   am_compiler_list=
 
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then
+if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4386,6 +4805,9 @@ else
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -4403,7 +4825,17 @@ else
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -4413,19 +4845,23 @@ else
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -4449,7 +4885,7 @@ else
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CCAS_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5
 $as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; }
 CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type
 
@@ -4464,141 +4900,41 @@ else
 fi
 
 
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    rm -rf conftest.one conftest.two conftest.dir
-	    echo one > conftest.one
-	    echo two > conftest.two
-	    mkdir conftest.dir
-	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-	      test -s conftest.one && test -s conftest.two &&
-	      test -s conftest.dir/conftest.one &&
-	      test -s conftest.dir/conftest.two
-	    then
-	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	      break 3
-	    fi
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-
-done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
 $as_echo_n "checking whether ln -s works... " >&6; }
 LN_S=$as_ln_s
 if test "$LN_S" = "ln -s"; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
 $as_echo "no, using $LN_S" >&6; }
 fi
 
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
 
-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
 $as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then
+if test "${ac_cv_build+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
-   { (exit 1); exit 1; }; };;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -4614,28 +4950,24 @@ IFS=$ac_save_IFS
 case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
-{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
 $as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then
+if test "${ac_cv_host+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-$as_echo "$as_me: error: invalid value of canonical host" >&2;}
-   { (exit 1); exit 1; }; };;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -4658,9 +4990,9 @@ case $host in
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AS+set}" = set; then
+if test "${ac_cv_prog_AS+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AS"; then
@@ -4671,24 +5003,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AS="${ac_tool_prefix}as"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AS=$ac_cv_prog_AS
 if test -n "$AS"; then
-  { $as_echo "$as_me:$LINENO: result: $AS" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
 $as_echo "$AS" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4698,9 +5030,9 @@ if test -z "$ac_cv_prog_AS"; then
   ac_ct_AS=$AS
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_AS"; then
@@ -4711,24 +5043,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AS="as"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_AS=$ac_cv_prog_ac_ct_AS
 if test -n "$ac_ct_AS"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
 $as_echo "$ac_ct_AS" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4737,7 +5069,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -4750,9 +5082,9 @@ fi
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DLLTOOL"; then
@@ -4763,24 +5095,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 DLLTOOL=$ac_cv_prog_DLLTOOL
 if test -n "$DLLTOOL"; then
-  { $as_echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
 $as_echo "$DLLTOOL" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4790,9 +5122,9 @@ if test -z "$ac_cv_prog_DLLTOOL"; then
   ac_ct_DLLTOOL=$DLLTOOL
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DLLTOOL"; then
@@ -4803,24 +5135,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
 if test -n "$ac_ct_DLLTOOL"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
 $as_echo "$ac_ct_DLLTOOL" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4829,7 +5161,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -4842,9 +5174,9 @@ fi
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OBJDUMP"; then
@@ -4855,24 +5187,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 OBJDUMP=$ac_cv_prog_OBJDUMP
 if test -n "$OBJDUMP"; then
-  { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
 $as_echo "$OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4882,9 +5214,9 @@ if test -z "$ac_cv_prog_OBJDUMP"; then
   ac_ct_OBJDUMP=$OBJDUMP
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OBJDUMP"; then
@@ -4895,24 +5227,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
 if test -n "$ac_ct_OBJDUMP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
 $as_echo "$ac_ct_OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4921,7 +5253,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -4955,7 +5287,7 @@ test -z "$OBJDUMP" && OBJDUMP=objdump
 
 
 # Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
+if test "${enable_static+set}" = set; then :
   enableval=$enable_static; p=${PACKAGE-default}
     case $enableval in
     yes) enable_static=yes ;;
@@ -4987,7 +5319,7 @@ fi
 
 case `pwd` in
   *\ * | *\	*)
-    { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
 esac
 
@@ -5010,9 +5342,9 @@ macro_revision='1.3012'
 
 ltmain="$ac_aux_dir/ltmain.sh"
 
-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
 $as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then
+if test "${ac_cv_path_SED+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
             ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
@@ -5020,7 +5352,7 @@ else
        ac_script="$ac_script$as_nl$ac_script"
      done
      echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
-     $as_unset ac_script || ac_script=
+     { ac_script=; unset ac_script;}
      if test -z "$SED"; then
   ac_path_SED_found=false
   # Loop through the user's path and test for each of PROGNAME-LIST
@@ -5029,7 +5361,7 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in sed gsed; do
+    for ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
       { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
@@ -5049,7 +5381,7 @@ case `"$ac_path_SED" --version 2>&1` in
     $as_echo '' >> "conftest.nl"
     "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
     if test $ac_count -gt ${ac_path_SED_max-0}; then
       # Best one so far, save it but keep looking for a better one
       ac_cv_path_SED="$ac_path_SED"
@@ -5064,19 +5396,17 @@ esac
       $ac_path_SED_found && break 3
     done
   done
-done
+  done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_SED"; then
-    { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
   fi
 else
   ac_cv_path_SED=$SED
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
 $as_echo "$ac_cv_path_SED" >&6; }
  SED="$ac_cv_path_SED"
   rm -f conftest.sed
@@ -5094,9 +5424,9 @@ Xsed="$SED -e 1s/^X//"
 
 
 
-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
 $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
+if test "${ac_cv_path_GREP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$GREP"; then
@@ -5107,7 +5437,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in grep ggrep; do
+    for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
       { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
@@ -5127,7 +5457,7 @@ case `"$ac_path_GREP" --version 2>&1` in
     $as_echo 'GREP' >> "conftest.nl"
     "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
     if test $ac_count -gt ${ac_path_GREP_max-0}; then
       # Best one so far, save it but keep looking for a better one
       ac_cv_path_GREP="$ac_path_GREP"
@@ -5142,26 +5472,24 @@ esac
       $ac_path_GREP_found && break 3
     done
   done
-done
+  done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_GREP"; then
-    { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_GREP=$GREP
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
 $as_echo "$ac_cv_path_GREP" >&6; }
  GREP="$ac_cv_path_GREP"
 
 
-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
 $as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
+if test "${ac_cv_path_EGREP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -5175,7 +5503,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in egrep; do
+    for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
       { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
@@ -5195,7 +5523,7 @@ case `"$ac_path_EGREP" --version 2>&1` in
     $as_echo 'EGREP' >> "conftest.nl"
     "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
     if test $ac_count -gt ${ac_path_EGREP_max-0}; then
       # Best one so far, save it but keep looking for a better one
       ac_cv_path_EGREP="$ac_path_EGREP"
@@ -5210,12 +5538,10 @@ esac
       $ac_path_EGREP_found && break 3
     done
   done
-done
+  done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_EGREP"; then
-    { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_EGREP=$EGREP
@@ -5223,14 +5549,14 @@ fi
 
    fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
 $as_echo "$ac_cv_path_EGREP" >&6; }
  EGREP="$ac_cv_path_EGREP"
 
 
-{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
 $as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then
+if test "${ac_cv_path_FGREP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
@@ -5244,7 +5570,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in fgrep; do
+    for ac_prog in fgrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
       { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
@@ -5264,7 +5590,7 @@ case `"$ac_path_FGREP" --version 2>&1` in
     $as_echo 'FGREP' >> "conftest.nl"
     "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
     if test $ac_count -gt ${ac_path_FGREP_max-0}; then
       # Best one so far, save it but keep looking for a better one
       ac_cv_path_FGREP="$ac_path_FGREP"
@@ -5279,12 +5605,10 @@ esac
       $ac_path_FGREP_found && break 3
     done
   done
-done
+  done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_FGREP"; then
-    { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_FGREP=$FGREP
@@ -5292,7 +5616,7 @@ fi
 
    fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
 $as_echo "$ac_cv_path_FGREP" >&6; }
  FGREP="$ac_cv_path_FGREP"
 
@@ -5318,7 +5642,7 @@ test -z "$GREP" && GREP=grep
 
 
 # Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
+if test "${with_gnu_ld+set}" = set; then :
   withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
 else
   with_gnu_ld=no
@@ -5327,7 +5651,7 @@ fi
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 $as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
@@ -5357,13 +5681,13 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 $as_echo_n "checking for GNU ld... " >&6; }
 else
-  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
 $as_echo_n "checking for non-GNU ld... " >&6; }
 fi
-if test "${lt_cv_path_LD+set}" = set; then
+if test "${lt_cv_path_LD+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
@@ -5394,18 +5718,16 @@ fi
 
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  { $as_echo "$as_me:$LINENO: result: $LD" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 $as_echo "$LD" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
+if test "${lt_cv_prog_gnu_ld+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   # I'd rather use --version here, but apparently some GNU lds only accept -v.
@@ -5418,7 +5740,7 @@ case `$LD -v 2>&1 </dev/null` in
   ;;
 esac
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
 $as_echo "$lt_cv_prog_gnu_ld" >&6; }
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
@@ -5430,9 +5752,9 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
 
-{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
+if test "${lt_cv_path_NM+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
@@ -5479,7 +5801,7 @@ else
   : ${lt_cv_path_NM=no}
 fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
 if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
@@ -5490,9 +5812,9 @@ else
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DUMPBIN"; then
@@ -5503,24 +5825,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 DUMPBIN=$ac_cv_prog_DUMPBIN
 if test -n "$DUMPBIN"; then
-  { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
 $as_echo "$DUMPBIN" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5534,9 +5856,9 @@ if test -z "$DUMPBIN"; then
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DUMPBIN"; then
@@ -5547,24 +5869,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
 if test -n "$ac_ct_DUMPBIN"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
 $as_echo "$ac_ct_DUMPBIN" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5577,7 +5899,7 @@ done
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -5597,33 +5919,33 @@ test -z "$NM" && NM=nm
 
 
 
-{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
 $as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then
+if test "${lt_cv_nm_interface+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:5607: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:5929: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:5610: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:5932: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:5613: output\"" >&5)
+  (eval echo "\"\$as_me:5935: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
   fi
   rm -f conftest*
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
 $as_echo "$lt_cv_nm_interface" >&6; }
 
 # find the maximum length of command line arguments
-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
 $as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
     i=0
@@ -5741,10 +6063,10 @@ else
 fi
 
 if test -n $lt_cv_sys_max_cmd_len ; then
-  { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
 $as_echo "$lt_cv_sys_max_cmd_len" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: none" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
 $as_echo "none" >&6; }
 fi
 max_cmd_len=$lt_cv_sys_max_cmd_len
@@ -5758,7 +6080,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 
-{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
 # Try some XSI features
 xsi_shell=no
@@ -5768,17 +6090,17 @@ xsi_shell=no
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
-{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
 $as_echo "$xsi_shell" >&6; }
 
 
-{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
 lt_shell_append=no
 ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
     >/dev/null 2>&1 \
   && lt_shell_append=yes
-{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
 $as_echo "$lt_shell_append" >&6; }
 
 
@@ -5813,14 +6135,14 @@ esac
 
 
 
-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
 $as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
+if test "${lt_cv_ld_reload_flag+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_reload_flag='-r'
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
 $as_echo "$lt_cv_ld_reload_flag" >&6; }
 reload_flag=$lt_cv_ld_reload_flag
 case $reload_flag in
@@ -5849,9 +6171,9 @@ esac
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OBJDUMP"; then
@@ -5862,24 +6184,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 OBJDUMP=$ac_cv_prog_OBJDUMP
 if test -n "$OBJDUMP"; then
-  { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
 $as_echo "$OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5889,9 +6211,9 @@ if test -z "$ac_cv_prog_OBJDUMP"; then
   ac_ct_OBJDUMP=$OBJDUMP
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OBJDUMP"; then
@@ -5902,24 +6224,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
 if test -n "$ac_ct_OBJDUMP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
 $as_echo "$ac_ct_OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5928,7 +6250,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -5945,9 +6267,9 @@ test -z "$OBJDUMP" && OBJDUMP=objdump
 
 
 
-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
 $as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
+if test "${lt_cv_deplibs_check_method+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_file_magic_cmd='$MAGIC_CMD'
@@ -6141,7 +6463,7 @@ tpf*)
 esac
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
 $as_echo "$lt_cv_deplibs_check_method" >&6; }
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
@@ -6161,9 +6483,9 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
+if test "${ac_cv_prog_AR+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AR"; then
@@ -6174,24 +6496,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AR=$ac_cv_prog_AR
 if test -n "$AR"; then
-  { $as_echo "$as_me:$LINENO: result: $AR" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
 $as_echo "$AR" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -6201,9 +6523,9 @@ if test -z "$ac_cv_prog_AR"; then
   ac_ct_AR=$AR
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_AR"; then
@@ -6214,24 +6536,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_AR=$ac_cv_prog_ac_ct_AR
 if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
 $as_echo "$ac_ct_AR" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -6240,7 +6562,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -6266,9 +6588,9 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if test "${ac_cv_prog_STRIP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -6279,24 +6601,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
 $as_echo "$STRIP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -6306,9 +6628,9 @@ if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -6319,24 +6641,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
 $as_echo "$ac_ct_STRIP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -6345,7 +6667,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -6365,9 +6687,9 @@ test -z "$STRIP" && STRIP=:
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$RANLIB"; then
@@ -6378,24 +6700,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
 $as_echo "$RANLIB" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -6405,9 +6727,9 @@ if test -z "$ac_cv_prog_RANLIB"; then
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_RANLIB"; then
@@ -6418,24 +6740,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
 $as_echo "$ac_ct_RANLIB" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -6444,7 +6766,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -6522,9 +6844,9 @@ compiler=$CC
 
 
 # Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -6640,18 +6962,18 @@ void nm_test_func(void){}
 int main(){nm_test_var='a';nm_test_func();return(0);}
 _LT_EOF
 
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
   (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -6704,11 +7026,11 @@ _LT_EOF
 	  lt_save_CFLAGS="$CFLAGS"
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
   (eval $ac_link) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
 	  LIBS="$lt_save_LIBS"
@@ -6742,10 +7064,10 @@ if test -z "$lt_cv_sys_global_symbol_pipe"; then
   lt_cv_sys_global_symbol_to_cdecl=
 fi
 if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { $as_echo "$as_me:$LINENO: result: failed" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
 $as_echo "failed" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: ok" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
 $as_echo "ok" >&6; }
 fi
 
@@ -6772,7 +7094,7 @@ fi
 
 
 # Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
+if test "${enable_libtool_lock+set}" = set; then :
   enableval=$enable_libtool_lock;
 fi
 
@@ -6784,11 +7106,11 @@ case $host in
 ia64-*-hpux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
     case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
 	HPUX_IA64_MODE="32"
@@ -6802,12 +7124,12 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 6805 "configure"' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  echo '#line 7127 "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
     if test "$lt_cv_prog_gnu_ld" = yes; then
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
@@ -6841,11 +7163,11 @@ x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
     case `/usr/bin/file conftest.o` in
       *32-bit*)
 	case $host in
@@ -6894,9 +7216,9 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
-  { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
 $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
+if test "${lt_cv_cc_needs_belf+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_ext=c
@@ -6905,11 +7227,7 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-     cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -6920,38 +7238,13 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   lt_cv_cc_needs_belf=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	lt_cv_cc_needs_belf=no
+  lt_cv_cc_needs_belf=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
      ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -6959,7 +7252,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
 $as_echo "$lt_cv_cc_needs_belf" >&6; }
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
@@ -6969,11 +7262,11 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
 sparc*-*solaris*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
     case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
@@ -6999,9 +7292,9 @@ need_locks="$enable_libtool_lock"
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DSYMUTIL"; then
@@ -7012,24 +7305,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 DSYMUTIL=$ac_cv_prog_DSYMUTIL
 if test -n "$DSYMUTIL"; then
-  { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
 $as_echo "$DSYMUTIL" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7039,9 +7332,9 @@ if test -z "$ac_cv_prog_DSYMUTIL"; then
   ac_ct_DSYMUTIL=$DSYMUTIL
   # Extract the first word of "dsymutil", so it can be a program name with args.
 set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DSYMUTIL"; then
@@ -7052,24 +7345,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
 if test -n "$ac_ct_DSYMUTIL"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
 $as_echo "$ac_ct_DSYMUTIL" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7078,7 +7371,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -7091,9 +7384,9 @@ fi
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
 set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then
+if test "${ac_cv_prog_NMEDIT+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NMEDIT"; then
@@ -7104,24 +7397,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 NMEDIT=$ac_cv_prog_NMEDIT
 if test -n "$NMEDIT"; then
-  { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
 $as_echo "$NMEDIT" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7131,9 +7424,9 @@ if test -z "$ac_cv_prog_NMEDIT"; then
   ac_ct_NMEDIT=$NMEDIT
   # Extract the first word of "nmedit", so it can be a program name with args.
 set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_NMEDIT"; then
@@ -7144,24 +7437,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_NMEDIT="nmedit"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
 if test -n "$ac_ct_NMEDIT"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
 $as_echo "$ac_ct_NMEDIT" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7170,7 +7463,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -7183,9 +7476,9 @@ fi
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
 set dummy ${ac_tool_prefix}lipo; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then
+if test "${ac_cv_prog_LIPO+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$LIPO"; then
@@ -7196,24 +7489,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 LIPO=$ac_cv_prog_LIPO
 if test -n "$LIPO"; then
-  { $as_echo "$as_me:$LINENO: result: $LIPO" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
 $as_echo "$LIPO" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7223,9 +7516,9 @@ if test -z "$ac_cv_prog_LIPO"; then
   ac_ct_LIPO=$LIPO
   # Extract the first word of "lipo", so it can be a program name with args.
 set dummy lipo; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_LIPO"; then
@@ -7236,24 +7529,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_LIPO="lipo"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
 if test -n "$ac_ct_LIPO"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
 $as_echo "$ac_ct_LIPO" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7262,7 +7555,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -7275,9 +7568,9 @@ fi
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}otool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then
+if test "${ac_cv_prog_OTOOL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OTOOL"; then
@@ -7288,24 +7581,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 OTOOL=$ac_cv_prog_OTOOL
 if test -n "$OTOOL"; then
-  { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
 $as_echo "$OTOOL" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7315,9 +7608,9 @@ if test -z "$ac_cv_prog_OTOOL"; then
   ac_ct_OTOOL=$OTOOL
   # Extract the first word of "otool", so it can be a program name with args.
 set dummy otool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OTOOL"; then
@@ -7328,24 +7621,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OTOOL="otool"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
 if test -n "$ac_ct_OTOOL"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
 $as_echo "$ac_ct_OTOOL" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7354,7 +7647,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -7367,9 +7660,9 @@ fi
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
 set dummy ${ac_tool_prefix}otool64; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then
+if test "${ac_cv_prog_OTOOL64+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OTOOL64"; then
@@ -7380,24 +7673,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 OTOOL64=$ac_cv_prog_OTOOL64
 if test -n "$OTOOL64"; then
-  { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
 $as_echo "$OTOOL64" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7407,9 +7700,9 @@ if test -z "$ac_cv_prog_OTOOL64"; then
   ac_ct_OTOOL64=$OTOOL64
   # Extract the first word of "otool64", so it can be a program name with args.
 set dummy otool64; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OTOOL64"; then
@@ -7420,24 +7713,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OTOOL64="otool64"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
 if test -n "$ac_ct_OTOOL64"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
 $as_echo "$ac_ct_OTOOL64" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7446,7 +7739,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -7482,9 +7775,9 @@ fi
 
 
 
-    { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
 $as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_apple_cc_single_mod=no
@@ -7509,22 +7802,18 @@ else
 	rm -f conftest.*
       fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
 $as_echo "$lt_cv_apple_cc_single_mod" >&6; }
-    { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_exported_symbols_list=no
       save_LDFLAGS=$LDFLAGS
       echo "_main" > conftest.sym
       LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -7535,42 +7824,17 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   lt_cv_ld_exported_symbols_list=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	lt_cv_ld_exported_symbols_list=no
+  lt_cv_ld_exported_symbols_list=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 	LDFLAGS="$save_LDFLAGS"
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
@@ -7612,14 +7876,14 @@ ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
 $as_echo_n "checking how to run the C preprocessor... " >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
+  if test "${ac_cv_prog_CPP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
@@ -7634,11 +7898,7 @@ do
   # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __STDC__
 # include <limits.h>
@@ -7647,78 +7907,34 @@ cat >>conftest.$ac_ext <<_ACEOF
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
 
+else
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # Broken: success on invalid input.
 continue
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   # Passes both tests.
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
+if $ac_preproc_ok; then :
   break
 fi
 
@@ -7730,7 +7946,7 @@ fi
 else
   ac_cv_prog_CPP=$CPP
 fi
-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
 $as_echo "$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
@@ -7741,11 +7957,7 @@ do
   # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __STDC__
 # include <limits.h>
@@ -7754,87 +7966,40 @@ cat >>conftest.$ac_ext <<_ACEOF
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
 
+else
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # Broken: success on invalid input.
 continue
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   # Passes both tests.
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
+if $ac_preproc_ok; then :
+
 else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -7844,16 +8009,12 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
+if test "${ac_cv_header_stdc+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 #include <stdarg.h>
@@ -7868,48 +8029,23 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_header_stdc=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_stdc=no
+  ac_cv_header_stdc=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <string.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
 else
   ac_cv_header_stdc=no
 fi
@@ -7919,18 +8055,14 @@ fi
 
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
+  $EGREP "free" >/dev/null 2>&1; then :
+
 else
   ac_cv_header_stdc=no
 fi
@@ -7940,14 +8072,10 @@ fi
 
 if test $ac_cv_header_stdc = yes; then
   # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   :
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ctype.h>
 #include <stdlib.h>
@@ -7974,118 +8102,34 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_run "$LINENO"; then :
 
-( exit $ac_status )
-ac_cv_header_stdc=no
+else
+  ac_cv_header_stdc=no
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
-
 fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
 $as_echo "$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
 
 fi
 
 # On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
 for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
 		  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  eval "$as_ac_Header=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -8095,62 +8139,13 @@ fi
 done
 
 
-
 for ac_header in dlfcn.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  eval "$as_ac_Header=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_DLFCN_H 1
 _ACEOF
 
 fi
@@ -8168,7 +8163,7 @@ done
 
 
             # Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
+if test "${enable_shared+set}" = set; then :
   enableval=$enable_shared; p=${PACKAGE-default}
     case $enableval in
     yes) enable_shared=yes ;;
@@ -8201,7 +8196,7 @@ fi
 
 
 # Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
+if test "${with_pic+set}" = set; then :
   withval=$with_pic; pic_mode="$withval"
 else
   pic_mode=default
@@ -8217,7 +8212,7 @@ test -z "$pic_mode" && pic_mode=default
 
 
   # Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
+if test "${enable_fast_install+set}" = set; then :
   enableval=$enable_fast_install; p=${PACKAGE-default}
     case $enableval in
     yes) enable_fast_install=yes ;;
@@ -8298,9 +8293,9 @@ if test -n "${ZSH_VERSION+set}" ; then
    setopt NO_GLOB_SUBST
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
 $as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then
+if test "${lt_cv_objdir+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   rm -f .libs 2>/dev/null
@@ -8313,7 +8308,7 @@ else
 fi
 rmdir .libs 2>/dev/null
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
 $as_echo "$lt_cv_objdir" >&6; }
 objdir=$lt_cv_objdir
 
@@ -8406,9 +8401,9 @@ test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
@@ -8459,10 +8454,10 @@ fi
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -8472,9 +8467,9 @@ fi
 
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    { $as_echo "$as_me:$LINENO: checking for file" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
 $as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
@@ -8525,10 +8520,10 @@ fi
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -8605,9 +8600,9 @@ lt_prog_compiler_no_builtin_flag=
 if test "$GCC" = yes; then
   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-  { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
@@ -8623,11 +8618,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8626: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8621: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8630: \$? = $ac_status" >&5
+   echo "$as_me:8625: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -8640,7 +8635,7 @@ else
    $RM conftest*
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
 if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
@@ -8660,7 +8655,7 @@ fi
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
 $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
   if test "$GCC" = yes; then
@@ -8932,7 +8927,7 @@ case $host_os in
     lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
     ;;
 esac
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
 $as_echo "$lt_prog_compiler_pic" >&6; }
 
 
@@ -8944,9 +8939,9 @@ $as_echo "$lt_prog_compiler_pic" >&6; }
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic"; then
-  { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_pic_works=no
@@ -8962,11 +8957,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8965: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8960: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8969: \$? = $ac_status" >&5
+   echo "$as_me:8964: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -8979,7 +8974,7 @@ else
    $RM conftest*
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
 if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
@@ -9003,9 +8998,9 @@ fi
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works=no
@@ -9031,7 +9026,7 @@ else
    LDFLAGS="$save_LDFLAGS"
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
 $as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
 if test x"$lt_cv_prog_compiler_static_works" = xyes; then
@@ -9046,9 +9041,9 @@ fi
 
 
 
-  { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
@@ -9067,11 +9062,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9070: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9065: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:9074: \$? = $ac_status" >&5
+   echo "$as_me:9069: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -9093,7 +9088,7 @@ else
    $RM conftest*
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
 $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
 
@@ -9101,9 +9096,9 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
 
 
-  { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
@@ -9122,11 +9117,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9125: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9120: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:9129: \$? = $ac_status" >&5
+   echo "$as_me:9124: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -9148,7 +9143,7 @@ else
    $RM conftest*
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
 $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
 
@@ -9157,7 +9152,7 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
   hard_links=yes
   $RM conftest*
@@ -9165,10 +9160,10 @@ $as_echo_n "checking if we can lock with hard links... " >&6; }
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
   if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
@@ -9181,7 +9176,7 @@ fi
 
 
 
-  { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
   runpath_var=
@@ -9627,11 +9622,7 @@ _LT_EOF
 	allow_undefined_flag='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -9642,27 +9633,7 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -9676,16 +9647,9 @@ aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpat
 if test -z "$aix_libpath"; then
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
         hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -9698,11 +9662,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -9713,27 +9673,7 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -9747,16 +9687,9 @@ aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpat
 if test -z "$aix_libpath"; then
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
 	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -9968,42 +9901,16 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# implicitly export all symbols.
         save_LDFLAGS="$LDFLAGS"
         LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        cat >conftest.$ac_ext <<_ACEOF
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 int foo(void) {}
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
         LDFLAGS="$save_LDFLAGS"
       else
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
@@ -10259,7 +10166,7 @@ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
     fi
   fi
 
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
 $as_echo "$ld_shlibs" >&6; }
 test "$ld_shlibs" = no && can_build_shared=no
 
@@ -10296,16 +10203,16 @@ x|xyes)
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
       $RM conftest*
       echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
         soname=conftest
         lib=conftest
         libobjs=conftest.$ac_objext
@@ -10319,11 +10226,11 @@ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
         libname=conftest
         lt_save_allow_undefined_flag=$allow_undefined_flag
         allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
   (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
         then
 	  archive_cmds_need_lc=no
         else
@@ -10334,7 +10241,7 @@ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
         cat conftest.err 1>&5
       fi
       $RM conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
 $as_echo "$archive_cmds_need_lc" >&6; }
       ;;
     esac
@@ -10498,7 +10405,7 @@ esac
 
 
 
-  { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
 
 if test "$GCC" = yes; then
@@ -10920,11 +10827,7 @@ linux* | k*bsd*-gnu)
   save_libdir=$libdir
   eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
        LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -10935,41 +10838,13 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
   shlibpath_overrides_runpath=yes
 fi
-
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
   LDFLAGS=$save_LDFLAGS
   libdir=$save_libdir
 
@@ -11193,7 +11068,7 @@ uts4*)
   dynamic_linker=no
   ;;
 esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
@@ -11295,7 +11170,7 @@ fi
 
 
 
-  { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
 $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" ||
@@ -11320,7 +11195,7 @@ else
   # directories.
   hardcode_action=unsupported
 fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
 $as_echo "$hardcode_action" >&6; }
 
 if test "$hardcode_action" = relink ||
@@ -11365,18 +11240,14 @@ else
 
   darwin*)
   # if libdl is installed we need to link against it
-    { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -11394,43 +11265,18 @@ return dlopen ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_dl_dlopen=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dl_dlopen=no
+  ac_cv_lib_dl_dlopen=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
 
@@ -11443,106 +11289,18 @@ fi
     ;;
 
   *)
-    { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
-$as_echo_n "checking for shl_load... " >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
-
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_shl_load=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_shl_load=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-$as_echo "$ac_cv_func_shl_load" >&6; }
-if test "x$ac_cv_func_shl_load" = x""yes; then
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = x""yes; then :
   lt_cv_dlopen="shl_load"
 else
-  { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
 $as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -11560,145 +11318,32 @@ return shl_load ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_dld_shl_load=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dld_shl_load=no
+  ac_cv_lib_dld_shl_load=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
 $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then
+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
   lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
-  { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
-$as_echo_n "checking for dlopen... " >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
-
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_dlopen=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-$as_echo "$ac_cv_func_dlopen" >&6; }
-if test "x$ac_cv_func_dlopen" = x""yes; then
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = x""yes; then :
   lt_cv_dlopen="dlopen"
 else
-  { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -11716,57 +11361,28 @@ return dlopen ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_dl_dlopen=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dl_dlopen=no
+  ac_cv_lib_dl_dlopen=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
-  { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
 $as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -11784,57 +11400,28 @@ return dlopen ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_svld_dlopen=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_svld_dlopen=no
+  ac_cv_lib_svld_dlopen=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
 $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then
+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
-  { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
 $as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -11852,43 +11439,18 @@ return dld_link ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_dld_dld_link=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dld_dld_link=no
+  ac_cv_lib_dld_dld_link=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
 $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then
+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
   lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
 
@@ -11927,9 +11489,9 @@ fi
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
 $as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then
+if test "${lt_cv_dlopen_self+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
@@ -11938,7 +11500,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11941 "configure"
+#line 11503 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11997,11 +11559,11 @@ int main ()
   return status;
 }
 _LT_EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
   (eval $ac_link) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -12018,14 +11580,14 @@ rm -fr conftest*
 
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
 $as_echo "$lt_cv_dlopen_self" >&6; }
 
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then
+if test "${lt_cv_dlopen_self_static+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
@@ -12034,7 +11596,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12037 "configure"
+#line 11599 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12093,11 +11655,11 @@ int main ()
   return status;
 }
 _LT_EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
   (eval $ac_link) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -12114,7 +11676,7 @@ rm -fr conftest*
 
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
 $as_echo "$lt_cv_dlopen_self_static" >&6; }
     fi
 
@@ -12153,12 +11715,12 @@ fi
 
 striplib=
 old_striplib=
-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
 $as_echo_n "checking whether stripping libraries is possible... " >&6; }
 if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 else
 # FIXME - insert some real tests, host_os isn't really good enough
@@ -12167,15 +11729,15 @@ else
     if test -n "$STRIP" ; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
-      { $as_echo "$as_me:$LINENO: result: yes" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
     else
-      { $as_echo "$as_me:$LINENO: result: no" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
     fi
     ;;
   *)
-    { $as_echo "$as_me:$LINENO: result: no" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
     ;;
   esac
@@ -12193,12 +11755,12 @@ fi
 
 
   # Report which library types will actually be built
-  { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
 $as_echo_n "checking if libtool supports shared libraries... " >&6; }
-  { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
 $as_echo "$can_build_shared" >&6; }
 
-  { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
 $as_echo_n "checking whether to build shared libraries... " >&6; }
   test "$can_build_shared" = "no" && enable_shared=no
 
@@ -12219,14 +11781,14 @@ $as_echo_n "checking whether to build shared libraries... " >&6; }
     fi
     ;;
   esac
-  { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
 $as_echo "$enable_shared" >&6; }
 
-  { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
 $as_echo_n "checking whether to build static libraries... " >&6; }
   # Make sure either enable_shared or enable_static is yes.
   test "$enable_shared" = yes || enable_static=yes
-  { $as_echo "$as_me:$LINENO: result: $enable_static" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
 $as_echo "$enable_static" >&6; }
 
 
@@ -12267,9 +11829,9 @@ CC="$lt_save_CC"
 # Josh Triplett <josh@freedesktop.org>
 # Extract the first word of "bash", so it can be a program name with args.
 set dummy bash; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_DOLT_BASH+set}" = set; then
+if test "${ac_cv_path_DOLT_BASH+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $DOLT_BASH in
@@ -12282,14 +11844,14 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_DOLT_BASH="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   ;;
@@ -12297,15 +11859,15 @@ esac
 fi
 DOLT_BASH=$ac_cv_path_DOLT_BASH
 if test -n "$DOLT_BASH"; then
-  { $as_echo "$as_me:$LINENO: result: $DOLT_BASH" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOLT_BASH" >&5
 $as_echo "$DOLT_BASH" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
-{ $as_echo "$as_me:$LINENO: checking if dolt supports this host" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if dolt supports this host" >&5
 $as_echo_n "checking if dolt supports this host... " >&6; }
 dolt_supported=yes
 if test x$DOLT_BASH = x; then
@@ -12327,12 +11889,12 @@ i?86-apple-darwin*)
     ;;
 esac
 if test x$dolt_supported = xno ; then
-    { $as_echo "$as_me:$LINENO: result: no, falling back to libtool" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, falling back to libtool" >&5
 $as_echo "no, falling back to libtool" >&6; }
     LTCOMPILE='$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(COMPILE)'
     LTCXXCOMPILE='$(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXXCOMPILE)'
 else
-    { $as_echo "$as_me:$LINENO: result: yes, replacing libtool" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, replacing libtool" >&5
 $as_echo "yes, replacing libtool" >&6; }
 
     cat <<__DOLTCOMPILE__EOF__ >doltcompile
@@ -12458,11 +12020,11 @@ fi
 
 # end dolt
 
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -12480,11 +12042,11 @@ esac
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
@@ -12495,9 +12057,9 @@ if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
 	if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
 set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
+if test "${ac_cv_path_PKG_CONFIG+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $PKG_CONFIG in
@@ -12510,14 +12072,14 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   ;;
@@ -12525,10 +12087,10 @@ esac
 fi
 PKG_CONFIG=$ac_cv_path_PKG_CONFIG
 if test -n "$PKG_CONFIG"; then
-  { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
 $as_echo "$PKG_CONFIG" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -12538,9 +12100,9 @@ if test -z "$ac_cv_path_PKG_CONFIG"; then
   ac_pt_PKG_CONFIG=$PKG_CONFIG
   # Extract the first word of "pkg-config", so it can be a program name with args.
 set dummy pkg-config; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
+if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $ac_pt_PKG_CONFIG in
@@ -12553,14 +12115,14 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   ;;
@@ -12568,10 +12130,10 @@ esac
 fi
 ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
 if test -n "$ac_pt_PKG_CONFIG"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
 $as_echo "$ac_pt_PKG_CONFIG" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -12580,7 +12142,7 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -12593,13 +12155,13 @@ fi
 fi
 if test -n "$PKG_CONFIG"; then
 	_pkg_min_version=0.9.0
-	{ $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
 	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		{ $as_echo "$as_me:$LINENO: result: yes" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	else
-		{ $as_echo "$as_me:$LINENO: result: no" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 		PKG_CONFIG=""
 	fi
@@ -12609,9 +12171,9 @@ for ac_prog in flex lex
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LEX+set}" = set; then
+if test "${ac_cv_prog_LEX+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$LEX"; then
@@ -12622,24 +12184,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_LEX="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 LEX=$ac_cv_prog_LEX
 if test -n "$LEX"; then
-  { $as_echo "$as_me:$LINENO: result: $LEX" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5
 $as_echo "$LEX" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -12668,20 +12230,20 @@ main (void)
   return ! yylex () + ! yywrap ();
 }
 _ACEOF
-{ (ac_try="$LEX conftest.l"
+{ { ac_try="$LEX conftest.l"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$LEX conftest.l") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ $as_echo "$as_me:$LINENO: checking lex output file root" >&5
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5
 $as_echo_n "checking lex output file root... " >&6; }
-if test "${ac_cv_prog_lex_root+set}" = set; then
+if test "${ac_cv_prog_lex_root+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12690,19 +12252,17 @@ if test -f lex.yy.c; then
 elif test -f lexyy.c; then
   ac_cv_prog_lex_root=lexyy
 else
-  { { $as_echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5
-$as_echo "$as_me: error: cannot find output from $LEX; giving up" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find output from $LEX; giving up" "$LINENO" 5
 fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5
 $as_echo "$ac_cv_prog_lex_root" >&6; }
 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
 
 if test -z "${LEXLIB+set}"; then
-  { $as_echo "$as_me:$LINENO: checking lex library" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5
 $as_echo_n "checking lex library... " >&6; }
-if test "${ac_cv_lib_lex+set}" = set; then
+if test "${ac_cv_lib_lex+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12710,55 +12270,29 @@ else
     ac_cv_lib_lex='none needed'
     for ac_lib in '' -lfl -ll; do
       LIBS="$ac_lib $ac_save_LIBS"
-      cat >conftest.$ac_ext <<_ACEOF
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 `cat $LEX_OUTPUT_ROOT.c`
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_lex=$ac_lib
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
       test "$ac_cv_lib_lex" != 'none needed' && break
     done
     LIBS=$ac_save_LIBS
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_lex" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5
 $as_echo "$ac_cv_lib_lex" >&6; }
   test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex
 fi
 
 
-{ $as_echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5
 $as_echo_n "checking whether yytext is a pointer... " >&6; }
-if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then
+if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   # POSIX says lex can declare yytext either as a pointer or an array; the
@@ -12767,52 +12301,24 @@ else
 ac_cv_prog_lex_yytext_pointer=no
 ac_save_LIBS=$LIBS
 LIBS="$LEXLIB $ac_save_LIBS"
-cat >conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 #define YYTEXT_POINTER 1
 `cat $LEX_OUTPUT_ROOT.c`
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_prog_lex_yytext_pointer=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_save_LIBS
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5
 $as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; }
 if test $ac_cv_prog_lex_yytext_pointer = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define YYTEXT_POINTER 1
-_ACEOF
+$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h
 
 fi
 rm -f conftest.l $LEX_OUTPUT_ROOT.c
@@ -12822,9 +12328,9 @@ for ac_prog in 'bison -y' byacc
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_YACC+set}" = set; then
+if test "${ac_cv_prog_YACC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$YACC"; then
@@ -12835,24 +12341,24 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_YACC="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 YACC=$ac_cv_prog_YACC
 if test -n "$YACC"; then
-  { $as_echo "$as_me:$LINENO: result: $YACC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5
 $as_echo "$YACC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -12862,15 +12368,15 @@ done
 test -n "$YACC" || YACC="yacc"
 
 # Check whether --enable-largefile was given.
-if test "${enable_largefile+set}" = set; then
+if test "${enable_largefile+set}" = set; then :
   enableval=$enable_largefile;
 fi
 
 if test "$enable_largefile" != no; then
 
-  { $as_echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
 $as_echo_n "checking for special C compiler options needed for large files... " >&6; }
-if test "${ac_cv_sys_largefile_CC+set}" = set; then
+if test "${ac_cv_sys_largefile_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_sys_largefile_CC=no
@@ -12879,11 +12385,7 @@ else
        while :; do
 	 # IRIX 6.2 and later do not support large files by default,
 	 # so use the C compiler's -n32 option if that helps.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
  /* Check that off_t can represent 2**63 - 1 correctly.
@@ -12902,60 +12404,14 @@ main ()
   return 0;
 }
 _ACEOF
-	 rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+	 if ac_fn_c_try_compile "$LINENO"; then :
   break
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext
 	 CC="$CC -n32"
-	 rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+	 if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_sys_largefile_CC=' -n32'; break
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext
 	 break
        done
@@ -12963,23 +12419,19 @@ rm -f core conftest.err conftest.$ac_objext
        rm -f conftest.$ac_ext
     fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
 $as_echo "$ac_cv_sys_largefile_CC" >&6; }
   if test "$ac_cv_sys_largefile_CC" != no; then
     CC=$CC$ac_cv_sys_largefile_CC
   fi
 
-  { $as_echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
 $as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
-if test "${ac_cv_sys_file_offset_bits+set}" = set; then
+if test "${ac_cv_sys_file_offset_bits+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   while :; do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
  /* Check that off_t can represent 2**63 - 1 correctly.
@@ -12998,38 +12450,11 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_sys_file_offset_bits=no; break
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #define _FILE_OFFSET_BITS 64
 #include <sys/types.h>
@@ -13049,38 +12474,15 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_sys_file_offset_bits=64; break
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   ac_cv_sys_file_offset_bits=unknown
   break
 done
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
 $as_echo "$ac_cv_sys_file_offset_bits" >&6; }
 case $ac_cv_sys_file_offset_bits in #(
   no | unknown) ;;
@@ -13092,17 +12494,13 @@ _ACEOF
 esac
 rm -rf conftest*
   if test $ac_cv_sys_file_offset_bits = unknown; then
-    { $as_echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
 $as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
-if test "${ac_cv_sys_large_files+set}" = set; then
+if test "${ac_cv_sys_large_files+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   while :; do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
  /* Check that off_t can represent 2**63 - 1 correctly.
@@ -13121,38 +12519,11 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_sys_large_files=no; break
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #define _LARGE_FILES 1
 #include <sys/types.h>
@@ -13172,38 +12543,15 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_sys_large_files=1; break
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   ac_cv_sys_large_files=unknown
   break
 done
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
 $as_echo "$ac_cv_sys_large_files" >&6; }
 case $ac_cv_sys_large_files in #(
   no | unknown) ;;
@@ -13223,9 +12571,9 @@ for ac_prog in cpp
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_RAWCPP+set}" = set; then
+if test "${ac_cv_path_RAWCPP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $RAWCPP in
@@ -13239,14 +12587,14 @@ for as_dir in $as_dummy
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_RAWCPP="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   ;;
@@ -13254,10 +12602,10 @@ esac
 fi
 RAWCPP=$ac_cv_path_RAWCPP
 if test -n "$RAWCPP"; then
-  { $as_echo "$as_me:$LINENO: result: $RAWCPP" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RAWCPP" >&5
 $as_echo "$RAWCPP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -13270,49 +12618,47 @@ test -n "$RAWCPP" || RAWCPP="${CPP}"
 # Check for flag to avoid builtin definitions - assumes unix is predefined,
 # which is not the best choice for supporting other OS'es, but covers most
 # of the ones we need for now.
-{ $as_echo "$as_me:$LINENO: checking if $RAWCPP requires -undef" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $RAWCPP requires -undef" >&5
 $as_echo_n "checking if $RAWCPP requires -undef... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 Does cpp redefine unix ?
 _ACEOF
 if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 else
 	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
 		RAWCPPFLAGS=-undef
-		{ $as_echo "$as_me:$LINENO: result: yes" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	# under Cygwin unix is still defined even with -undef
 	elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
 		RAWCPPFLAGS="-undef -ansi"
-		{ $as_echo "$as_me:$LINENO: result: yes, with -ansi" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, with -ansi" >&5
 $as_echo "yes, with -ansi" >&6; }
 	else
-		{ { $as_echo "$as_me:$LINENO: error: ${RAWCPP} defines unix with or without -undef.  I don't know what to do." >&5
-$as_echo "$as_me: error: ${RAWCPP} defines unix with or without -undef.  I don't know what to do." >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "${RAWCPP} defines unix with or without -undef.  I don't know what to do." "$LINENO" 5
 	fi
 fi
 rm -f conftest.$ac_ext
 
-{ $as_echo "$as_me:$LINENO: checking if $RAWCPP requires -traditional" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $RAWCPP requires -traditional" >&5
 $as_echo_n "checking if $RAWCPP requires -traditional... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 Does cpp preserve   "whitespace"?
 _ACEOF
 if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 else
 	if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve   \"'` -eq 1 ; then
 		RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
-		{ $as_echo "$as_me:$LINENO: result: yes" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	else
-		{ { $as_echo "$as_me:$LINENO: error: ${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do." >&5
-$as_echo "$as_me: error: ${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do." >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "${RAWCPP} does not preserve whitespace with or without -traditional.  I don't know what to do." "$LINENO" 5
 	fi
 fi
 rm -f conftest.$ac_ext
@@ -13320,9 +12666,9 @@ rm -f conftest.$ac_ext
 
 # Extract the first word of "sed", so it can be a program name with args.
 set dummy sed; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then
+if test "${ac_cv_path_SED+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $SED in
@@ -13335,14 +12681,14 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_SED="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   ;;
@@ -13350,10 +12696,10 @@ esac
 fi
 SED=$ac_cv_path_SED
 if test -n "$SED"; then
-  { $as_echo "$as_me:$LINENO: result: $SED" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SED" >&5
 $as_echo "$SED" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -13361,7 +12707,7 @@ fi
 
 
 # Check whether --with-dtrace was given.
-if test "${with_dtrace+set}" = set; then
+if test "${with_dtrace+set}" = set; then :
   withval=$with_dtrace; WDTRACE=$withval
 else
   WDTRACE=auto
@@ -13375,9 +12721,9 @@ fi
 if test "x$WDTRACE" = "xyes" -o "x$WDTRACE" = "xauto" ; then
 	# Extract the first word of "dtrace", so it can be a program name with args.
 set dummy dtrace; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_DTRACE+set}" = set; then
+if test "${ac_cv_path_DTRACE+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $DTRACE in
@@ -13391,14 +12737,14 @@ for as_dir in $as_dummy
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_DTRACE="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   test -z "$ac_cv_path_DTRACE" && ac_cv_path_DTRACE="not_found"
@@ -13407,159 +12753,25 @@ esac
 fi
 DTRACE=$ac_cv_path_DTRACE
 if test -n "$DTRACE"; then
-  { $as_echo "$as_me:$LINENO: result: $DTRACE" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DTRACE" >&5
 $as_echo "$DTRACE" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
 	if test "x$DTRACE" = "xnot_found" ; then
 		if test "x$WDTRACE" = "xyes" ; then
-			{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+			{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: dtrace requested but not found
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: dtrace requested but not found
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "dtrace requested but not found
+See \`config.log' for more details." "$LINENO" 5; }
 		fi
 		WDTRACE="no"
 	else
-		if test "${ac_cv_header_sys_sdt_h+set}" = set; then
-  { $as_echo "$as_me:$LINENO: checking for sys/sdt.h" >&5
-$as_echo_n "checking for sys/sdt.h... " >&6; }
-if test "${ac_cv_header_sys_sdt_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_sdt_h" >&5
-$as_echo "$ac_cv_header_sys_sdt_h" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking sys/sdt.h usability" >&5
-$as_echo_n "checking sys/sdt.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <sys/sdt.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking sys/sdt.h presence" >&5
-$as_echo_n "checking sys/sdt.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/sdt.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: sys/sdt.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: sys/sdt.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/sdt.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: sys/sdt.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: sys/sdt.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: sys/sdt.h: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/sdt.h:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: sys/sdt.h:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/sdt.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: sys/sdt.h: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/sdt.h:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: sys/sdt.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/sdt.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: sys/sdt.h: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/sdt.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: sys/sdt.h: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for sys/sdt.h" >&5
-$as_echo_n "checking for sys/sdt.h... " >&6; }
-if test "${ac_cv_header_sys_sdt_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_header_sys_sdt_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_sdt_h" >&5
-$as_echo "$ac_cv_header_sys_sdt_h" >&6; }
-
-fi
-if test "x$ac_cv_header_sys_sdt_h" = x""yes; then
+		ac_fn_c_check_header_mongrel "$LINENO" "sys/sdt.h" "ac_cv_header_sys_sdt_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_sdt_h" = x""yes; then :
   HAS_SDT_H="yes"
 else
   HAS_SDT_H="no"
@@ -13573,9 +12785,7 @@ fi
 fi
 if test "x$WDTRACE" != "xno" ; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XSERVER_DTRACE 1
-_ACEOF
+$as_echo "#define XSERVER_DTRACE 1" >>confdefs.h
 
 fi
  if test "x$WDTRACE" != "xno"; then
@@ -13587,24 +12797,15 @@ else
 fi
 
 
-
-
-
-
-
 ac_header_dirent=no
 for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
   as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5
 $as_echo_n "checking for $ac_hdr that defines DIR... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #include <$ac_hdr>
@@ -13618,41 +12819,18 @@ return 0;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   eval "$as_ac_Header=yes"
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Header=no"
+  eval "$as_ac_Header=no"
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+eval ac_res=\$$as_ac_Header
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
 _ACEOF
@@ -13663,17 +12841,13 @@ fi
 done
 # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
 if test $ac_header_dirent = dirent.h; then
-  { $as_echo "$as_me:$LINENO: checking for library containing opendir" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
 $as_echo_n "checking for library containing opendir... " >&6; }
-if test "${ac_cv_search_opendir+set}" = set; then
+if test "${ac_cv_search_opendir+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -13698,70 +12872,39 @@ for ac_lib in '' dir; do
     ac_res=-l$ac_lib
     LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
   fi
-  rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+  if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_search_opendir=$ac_res
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext
-  if test "${ac_cv_search_opendir+set}" = set; then
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if test "${ac_cv_search_opendir+set}" = set; then :
   break
 fi
 done
-if test "${ac_cv_search_opendir+set}" = set; then
-  :
+if test "${ac_cv_search_opendir+set}" = set; then :
+
 else
   ac_cv_search_opendir=no
 fi
 rm conftest.$ac_ext
 LIBS=$ac_func_search_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
 $as_echo "$ac_cv_search_opendir" >&6; }
 ac_res=$ac_cv_search_opendir
-if test "$ac_res" != no; then
+if test "$ac_res" != no; then :
   test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
 
 fi
 
 else
-  { $as_echo "$as_me:$LINENO: checking for library containing opendir" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
 $as_echo_n "checking for library containing opendir... " >&6; }
-if test "${ac_cv_search_opendir+set}" = set; then
+if test "${ac_cv_search_opendir+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -13786,70 +12929,39 @@ for ac_lib in '' x; do
     ac_res=-l$ac_lib
     LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
   fi
-  rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+  if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_search_opendir=$ac_res
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext
-  if test "${ac_cv_search_opendir+set}" = set; then
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if test "${ac_cv_search_opendir+set}" = set; then :
   break
 fi
 done
-if test "${ac_cv_search_opendir+set}" = set; then
-  :
+if test "${ac_cv_search_opendir+set}" = set; then :
+
 else
   ac_cv_search_opendir=no
 fi
 rm conftest.$ac_ext
 LIBS=$ac_func_search_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
 $as_echo "$ac_cv_search_opendir" >&6; }
 ac_res=$ac_cv_search_opendir
-if test "$ac_res" != no; then
+if test "$ac_res" != no; then :
   test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
 
 fi
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
+if test "${ac_cv_header_stdc+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 #include <stdarg.h>
@@ -13864,48 +12976,23 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_header_stdc=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_stdc=no
+  ac_cv_header_stdc=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <string.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
 else
   ac_cv_header_stdc=no
 fi
@@ -13915,18 +13002,14 @@ fi
 
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
+  $EGREP "free" >/dev/null 2>&1; then :
+
 else
   ac_cv_header_stdc=no
 fi
@@ -13936,14 +13019,10 @@ fi
 
 if test $ac_cv_header_stdc = yes; then
   # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   :
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ctype.h>
 #include <stdlib.h>
@@ -13970,200 +13049,31 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_run "$LINENO"; then :
 
-( exit $ac_status )
-ac_cv_header_stdc=no
+else
+  ac_cv_header_stdc=no
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
-
 fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
 $as_echo "$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
 
 fi
 
-
-
-
-
 for ac_header in fcntl.h stdlib.h string.h unistd.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -14173,16 +13083,12 @@ fi
 done
 
 
-{ $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
 $as_echo_n "checking for an ANSI C-conforming const... " >&6; }
-if test "${ac_cv_c_const+set}" = set; then
+if test "${ac_cv_c_const+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -14242,57 +13148,29 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_const=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_c_const=no
+  ac_cv_c_const=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
 $as_echo "$ac_cv_c_const" >&6; }
 if test $ac_cv_c_const = no; then
 
-cat >>confdefs.h <<\_ACEOF
-#define const /**/
-_ACEOF
+$as_echo "#define const /**/" >>confdefs.h
 
 fi
 
-
- { $as_echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
 $as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then
+if test "${ac_cv_c_bigendian+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_c_bigendian=unknown
     # See if we're dealing with a universal compiler.
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifndef __APPLE_CC__
 	       not a universal capable compiler
@@ -14300,46 +13178,34 @@ cat >>conftest.$ac_ext <<_ACEOF
 	     typedef int dummy;
 
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
 
 	# Check for potential -arch flags.  It is not universal unless
-	# there are some -arch flags.  Note that *ppc* also matches
-	# ppc64.  This check is also rather less than ideal.
-	case "${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}" in  #(
-	  *-arch*ppc*|*-arch*i386*|*-arch*x86_64*) ac_cv_c_bigendian=universal;;
-	esac
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+	# there are at least two -arch flags with different values.
+	ac_arch=
+	ac_prev=
+	for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+	 if test -n "$ac_prev"; then
+	   case $ac_word in
+	     i?86 | x86_64 | ppc | ppc64)
+	       if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+		 ac_arch=$ac_word
+	       else
+		 ac_cv_c_bigendian=universal
+		 break
+	       fi
+	       ;;
+	   esac
+	   ac_prev=
+	 elif test "x$ac_word" = "x-arch"; then
+	   ac_prev=arch
+	 fi
+       done
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     if test $ac_cv_c_bigendian = unknown; then
       # See if sys/param.h defines the BYTE_ORDER macro.
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 	     #include <sys/param.h>
@@ -14357,30 +13223,9 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   # It does; now see whether it defined to BIG_ENDIAN or not.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 		#include <sys/param.h>
@@ -14396,49 +13241,18 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_bigendian=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_c_bigendian=no
+  ac_cv_c_bigendian=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     fi
     if test $ac_cv_c_bigendian = unknown; then
       # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <limits.h>
 
@@ -14453,30 +13267,9 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   # It does; now see whether it defined to _BIG_ENDIAN or not.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <limits.h>
 
@@ -14491,51 +13284,20 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_bigendian=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_c_bigendian=no
+  ac_cv_c_bigendian=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     fi
     if test $ac_cv_c_bigendian = unknown; then
       # Compile a test program.
-      if test "$cross_compiling" = yes; then
+      if test "$cross_compiling" = yes; then :
   # Try to guess by grepping values from an object file.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 short int ascii_mm[] =
 		  { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
@@ -14561,24 +13323,7 @@ return use_ascii (foo) == use_ebcdic (foo);
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
 	      ac_cv_c_bigendian=yes
 	    fi
@@ -14590,20 +13335,10 @@ $as_echo "$ac_try_echo") >&5
 		ac_cv_c_bigendian=unknown
 	      fi
 	    fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 $ac_includes_default
 int
@@ -14623,45 +13358,18 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_c_bigendian=no
 else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_bigendian=yes
+  ac_cv_c_bigendian=yes
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
-
     fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
 $as_echo "$ac_cv_c_bigendian" >&6; }
  case $ac_cv_c_bigendian in #(
    yes)
@@ -14670,17 +13378,12 @@ $as_echo "$ac_cv_c_bigendian" >&6; }
      ENDIAN="X_LITTLE_ENDIAN" ;; #(
    universal)
 
-cat >>confdefs.h <<\_ACEOF
-#define AC_APPLE_UNIVERSAL_BUILD 1
-_ACEOF
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
 
      ;; #(
    *)
-     { { $as_echo "$as_me:$LINENO: error: unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-$as_echo "$as_me: error: unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
-   { (exit 1); exit 1; }; } ;;
+     as_fn_error "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
  esac
 
 
@@ -14688,352 +13391,27 @@ $as_echo "$as_me: error: unknown endianness
 # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
 # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
 # This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:$LINENO: checking size of unsigned long" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of unsigned long" >&5
 $as_echo_n "checking size of unsigned long... " >&6; }
-if test "${ac_cv_sizeof_unsigned_long+set}" = set; then
+if test "${ac_cv_sizeof_unsigned_long+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (unsigned long))) >= 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (unsigned long))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_hi=$ac_mid; break
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_lo=`expr $ac_mid + 1`
-			if test $ac_lo -le $ac_mid; then
-			  ac_lo= ac_hi=
-			  break
-			fi
-			ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (unsigned long))) < 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (unsigned long))) >= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_lo=$ac_mid; break
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_hi=`expr '(' $ac_mid ')' - 1`
-			if test $ac_mid -le $ac_hi; then
-			  ac_lo= ac_hi=
-			  break
-			fi
-			ac_mid=`expr 2 '*' $ac_mid`
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (unsigned long))" "ac_cv_sizeof_unsigned_long"        "$ac_includes_default"; then :
 
-	ac_lo= ac_hi=
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (unsigned long))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_hi=$ac_mid
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_unsigned_long=$ac_lo;;
-'') if test "$ac_cv_type_unsigned_long" = yes; then
-     { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  if test "$ac_cv_type_unsigned_long" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long)
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute sizeof (unsigned long)
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }; }
-   else
-     ac_cv_sizeof_unsigned_long=0
-   fi ;;
-esac
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-static long int longval () { return (long int) (sizeof (unsigned long)); }
-static unsigned long int ulongval () { return (long int) (sizeof (unsigned long)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    return 1;
-  if (((long int) (sizeof (unsigned long))) < 0)
-    {
-      long int i = longval ();
-      if (i != ((long int) (sizeof (unsigned long))))
-	return 1;
-      fprintf (f, "%ld", i);
-    }
-  else
-    {
-      unsigned long int i = ulongval ();
-      if (i != ((long int) (sizeof (unsigned long))))
-	return 1;
-      fprintf (f, "%lu", i);
-    }
-  /* Do not output a trailing newline, as this causes \r\n confusion
-     on some platforms.  */
-  return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_unsigned_long=`cat conftest.val`
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-if test "$ac_cv_type_unsigned_long" = yes; then
-     { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long)
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute sizeof (unsigned long)
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }; }
+{ as_fn_set_status 77
+as_fn_error "cannot compute sizeof (unsigned long)
+See \`config.log' for more details." "$LINENO" 5; }; }
    else
      ac_cv_sizeof_unsigned_long=0
    fi
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.val
+
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_long" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_unsigned_long" >&5
 $as_echo "$ac_cv_sizeof_unsigned_long" >&6; }
 
 
@@ -15045,108 +13423,13 @@ _ACEOF
 
 if test "$ac_cv_sizeof_unsigned_long" = 8; then
 
-cat >>confdefs.h <<\_ACEOF
-#define _XSERVER64 1
-_ACEOF
+$as_echo "#define _XSERVER64 1" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for pid_t" >&5
-$as_echo_n "checking for pid_t... " >&6; }
-if test "${ac_cv_type_pid_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_type_pid_t=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof (pid_t))
-       return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof ((pid_t)))
-	  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = x""yes; then :
 
-	ac_cv_type_pid_t=yes
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
-$as_echo "$ac_cv_type_pid_t" >&6; }
-if test "x$ac_cv_type_pid_t" = x""yes; then
-  :
 else
 
 cat >>confdefs.h <<_ACEOF
@@ -15164,151 +13447,12 @@ fi
 #	and a fallback to local macros if none of the above are found
 
 # if <byteswap.h> is found, assume it's the correct version
-
 for ac_header in byteswap.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "byteswap.h" "ac_cv_header_byteswap_h" "$ac_includes_default"
+if test "x$ac_cv_header_byteswap_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_BYTESWAP_H 1
 _ACEOF
 
 fi
@@ -15317,139 +13461,8 @@ done
 
 
 # if <sys/endian.h> is found, have to check which version
-if test "${ac_cv_header_sys_endian_h+set}" = set; then
-  { $as_echo "$as_me:$LINENO: checking for sys/endian.h" >&5
-$as_echo_n "checking for sys/endian.h... " >&6; }
-if test "${ac_cv_header_sys_endian_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_endian_h" >&5
-$as_echo "$ac_cv_header_sys_endian_h" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking sys/endian.h usability" >&5
-$as_echo_n "checking sys/endian.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <sys/endian.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking sys/endian.h presence" >&5
-$as_echo_n "checking sys/endian.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/endian.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: sys/endian.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: sys/endian.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/endian.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: sys/endian.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: sys/endian.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: sys/endian.h: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/endian.h:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: sys/endian.h:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/endian.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: sys/endian.h: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/endian.h:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: sys/endian.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/endian.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: sys/endian.h: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/endian.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: sys/endian.h: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for sys/endian.h" >&5
-$as_echo_n "checking for sys/endian.h... " >&6; }
-if test "${ac_cv_header_sys_endian_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_header_sys_endian_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_endian_h" >&5
-$as_echo "$ac_cv_header_sys_endian_h" >&6; }
-
-fi
-if test "x$ac_cv_header_sys_endian_h" = x""yes; then
+ac_fn_c_check_header_mongrel "$LINENO" "sys/endian.h" "ac_cv_header_sys_endian_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_endian_h" = x""yes; then :
   HAVE_SYS_ENDIAN_H="yes"
 else
   HAVE_SYS_ENDIAN_H="no"
@@ -15458,13 +13471,9 @@ fi
 
 
 if test "x$HAVE_SYS_ENDIAN_H" = "xyes" ; then
-	{ $as_echo "$as_me:$LINENO: checking for __swap16 variant of <sys/endian.h> byteswapping macros" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for __swap16 variant of <sys/endian.h> byteswapping macros" >&5
 $as_echo_n "checking for __swap16 variant of <sys/endian.h> byteswapping macros... " >&6; }
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #include <sys/types.h>
@@ -15482,48 +13491,19 @@ b = __swap16(a);
 }
 
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   SYS_ENDIAN__SWAP='yes'
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	SYS_ENDIAN__SWAP='no'
+  SYS_ENDIAN__SWAP='no'
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-	{ $as_echo "$as_me:$LINENO: result: $SYS_ENDIAN__SWAP" >&5
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYS_ENDIAN__SWAP" >&5
 $as_echo "$SYS_ENDIAN__SWAP" >&6; }
 
-	{ $as_echo "$as_me:$LINENO: checking for bswap16 variant of <sys/endian.h> byteswapping macros" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for bswap16 variant of <sys/endian.h> byteswapping macros" >&5
 $as_echo_n "checking for bswap16 variant of <sys/endian.h> byteswapping macros... " >&6; }
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #include <sys/types.h>
@@ -15541,39 +13521,14 @@ b = bswap16(a);
 }
 
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   SYS_ENDIAN_BSWAP='yes'
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	SYS_ENDIAN_BSWAP='no'
+  SYS_ENDIAN_BSWAP='no'
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-	{ $as_echo "$as_me:$LINENO: result: $SYS_ENDIAN_BSWAP" >&5
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYS_ENDIAN_BSWAP" >&5
 $as_echo "$SYS_ENDIAN_BSWAP" >&6; }
 
     	if test "$SYS_ENDIAN_BSWAP" = "yes" ; then
@@ -15590,9 +13545,7 @@ $as_echo "$SYS_ENDIAN_BSWAP" >&6; }
 
 	if test "$USE_SYS_ENDIAN_H" = "yes" ; then
 
-cat >>confdefs.h <<\_ACEOF
-#define USE_SYS_ENDIAN_H 1
-_ACEOF
+$as_echo "#define USE_SYS_ENDIAN_H 1" >>confdefs.h
 
 
 cat >>confdefs.h <<_ACEOF
@@ -15612,106 +13565,18 @@ _ACEOF
 	fi
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for dlopen" >&5
-$as_echo_n "checking for dlopen... " >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = x""yes; then :
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
-
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_dlopen=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_dlopen=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-$as_echo "$ac_cv_func_dlopen" >&6; }
-if test "x$ac_cv_func_dlopen" = x""yes; then
-  :
-else
-  { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -15729,237 +13594,36 @@ return dlopen ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_dl_dlopen=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dl_dlopen=no
+  ac_cv_lib_dl_dlopen=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
   DLOPEN_LIBS="-ldl"
 fi
 
 fi
 
 
-
 for ac_func in vprintf
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_func "$LINENO" "vprintf" "ac_cv_func_vprintf"
+if test "x$ac_cv_func_vprintf" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+#define HAVE_VPRINTF 1
 _ACEOF
 
-{ $as_echo "$as_me:$LINENO: checking for _doprnt" >&5
-$as_echo_n "checking for _doprnt... " >&6; }
-if test "${ac_cv_func__doprnt+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define _doprnt innocuous__doprnt
+ac_fn_c_check_func "$LINENO" "_doprnt" "ac_cv_func__doprnt"
+if test "x$ac_cv_func__doprnt" = x""yes; then :
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char _doprnt (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef _doprnt
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char _doprnt ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub__doprnt || defined __stub____doprnt
-choke me
-#endif
-
-int
-main ()
-{
-return _doprnt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func__doprnt=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func__doprnt=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
-$as_echo "$ac_cv_func__doprnt" >&6; }
-if test "x$ac_cv_func__doprnt" = x""yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DOPRNT 1
-_ACEOF
+$as_echo "#define HAVE_DOPRNT 1" >>confdefs.h
 
 fi
 
@@ -15967,120 +13631,14 @@ fi
 done
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 for ac_func in geteuid getuid link memmove memset mkstemp strchr strrchr \
 		strtol getopt getopt_long vsnprintf walkcontext backtrace \
 		getisax getzoneid shmctl64 strcasestr ffs
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
@@ -16090,16 +13648,12 @@ done
 
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
-{ $as_echo "$as_me:$LINENO: checking for working alloca.h" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
 $as_echo_n "checking for working alloca.h... " >&6; }
-if test "${ac_cv_working_alloca_h+set}" = set; then
+if test "${ac_cv_working_alloca_h+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <alloca.h>
 int
@@ -16111,59 +13665,28 @@ char *p = (char *) alloca (2 * sizeof (int));
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_working_alloca_h=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_working_alloca_h=no
+  ac_cv_working_alloca_h=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
 $as_echo "$ac_cv_working_alloca_h" >&6; }
 if test $ac_cv_working_alloca_h = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ALLOCA_H 1
-_ACEOF
+$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for alloca" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
 $as_echo_n "checking for alloca... " >&6; }
-if test "${ac_cv_func_alloca_works+set}" = set; then
+if test "${ac_cv_func_alloca_works+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __GNUC__
 # define alloca __builtin_alloca
@@ -16195,47 +13718,20 @@ char *p = (char *) alloca (1);
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_func_alloca_works=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_alloca_works=no
+  ac_cv_func_alloca_works=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
 $as_echo "$ac_cv_func_alloca_works" >&6; }
 
 if test $ac_cv_func_alloca_works = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ALLOCA 1
-_ACEOF
+$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
 
 else
   # The SVR3 libPW and SVR4 libucb both contain incompatible functions
@@ -16245,21 +13741,15 @@ else
 
 ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
 
-cat >>confdefs.h <<\_ACEOF
-#define C_ALLOCA 1
-_ACEOF
+$as_echo "#define C_ALLOCA 1" >>confdefs.h
 
 
-{ $as_echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
 $as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
-if test "${ac_cv_os_cray+set}" = set; then
+if test "${ac_cv_os_cray+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #if defined CRAY && ! defined CRAY2
 webecray
@@ -16269,7 +13759,7 @@ wenotbecray
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "webecray" >/dev/null 2>&1; then
+  $EGREP "webecray" >/dev/null 2>&1; then :
   ac_cv_os_cray=yes
 else
   ac_cv_os_cray=no
@@ -16277,101 +13767,14 @@ fi
 rm -f conftest*
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
 $as_echo "$ac_cv_os_cray" >&6; }
 if test $ac_cv_os_cray = yes; then
   for ac_func in _getb67 GETB67 getb67; do
     as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+   if test "x$as_val" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define CRAY_STACKSEG_END $ac_func
@@ -16383,19 +13786,15 @@ fi
   done
 fi
 
-{ $as_echo "$as_me:$LINENO: checking stack direction for C alloca" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
 $as_echo_n "checking stack direction for C alloca... " >&6; }
-if test "${ac_cv_c_stack_direction+set}" = set; then
+if test "${ac_cv_c_stack_direction+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   ac_cv_c_stack_direction=0
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 $ac_includes_default
 int
@@ -16418,46 +13817,18 @@ main ()
   return find_stack_direction () < 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_c_stack_direction=1
 else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_stack_direction=-1
+  ac_cv_c_stack_direction=-1
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
-
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
 $as_echo "$ac_cv_c_stack_direction" >&6; }
-
 cat >>confdefs.h <<_ACEOF
 #define STACK_DIRECTION $ac_cv_c_stack_direction
 _ACEOF
@@ -16465,464 +13836,36 @@ _ACEOF
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for getdtablesize" >&5
-$as_echo_n "checking for getdtablesize... " >&6; }
-if test "${ac_cv_func_getdtablesize+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define getdtablesize to an innocuous variant, in case <limits.h> declares getdtablesize.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define getdtablesize innocuous_getdtablesize
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getdtablesize (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef getdtablesize
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char getdtablesize ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_getdtablesize || defined __stub___getdtablesize
-choke me
-#endif
-
-int
-main ()
-{
-return getdtablesize ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_getdtablesize=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_getdtablesize=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_getdtablesize" >&5
-$as_echo "$ac_cv_func_getdtablesize" >&6; }
-if test "x$ac_cv_func_getdtablesize" = x""yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAS_GETDTABLESIZE 1
-_ACEOF
-
-fi
-
-{ $as_echo "$as_me:$LINENO: checking for getifaddrs" >&5
-$as_echo_n "checking for getifaddrs... " >&6; }
-if test "${ac_cv_func_getifaddrs+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define getifaddrs to an innocuous variant, in case <limits.h> declares getifaddrs.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define getifaddrs innocuous_getifaddrs
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getifaddrs (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef getifaddrs
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char getifaddrs ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_getifaddrs || defined __stub___getifaddrs
-choke me
-#endif
-
-int
-main ()
-{
-return getifaddrs ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_getifaddrs=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_getifaddrs=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_getifaddrs" >&5
-$as_echo "$ac_cv_func_getifaddrs" >&6; }
-if test "x$ac_cv_func_getifaddrs" = x""yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAS_GETIFADDRS 1
-_ACEOF
-
-fi
-
-{ $as_echo "$as_me:$LINENO: checking for getpeereid" >&5
-$as_echo_n "checking for getpeereid... " >&6; }
-if test "${ac_cv_func_getpeereid+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define getpeereid to an innocuous variant, in case <limits.h> declares getpeereid.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define getpeereid innocuous_getpeereid
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getpeereid (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef getpeereid
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char getpeereid ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_getpeereid || defined __stub___getpeereid
-choke me
-#endif
-
-int
-main ()
-{
-return getpeereid ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_getpeereid=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_getpeereid=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_getpeereid" >&5
-$as_echo "$ac_cv_func_getpeereid" >&6; }
-if test "x$ac_cv_func_getpeereid" = x""yes; then
+ac_fn_c_check_func "$LINENO" "getdtablesize" "ac_cv_func_getdtablesize"
+if test "x$ac_cv_func_getdtablesize" = x""yes; then :
 
-cat >>confdefs.h <<\_ACEOF
-#define HAS_GETPEEREID 1
-_ACEOF
+$as_echo "#define HAS_GETDTABLESIZE 1" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for getpeerucred" >&5
-$as_echo_n "checking for getpeerucred... " >&6; }
-if test "${ac_cv_func_getpeerucred+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define getpeerucred to an innocuous variant, in case <limits.h> declares getpeerucred.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define getpeerucred innocuous_getpeerucred
+ac_fn_c_check_func "$LINENO" "getifaddrs" "ac_cv_func_getifaddrs"
+if test "x$ac_cv_func_getifaddrs" = x""yes; then :
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getpeerucred (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+$as_echo "#define HAS_GETIFADDRS 1" >>confdefs.h
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef getpeerucred
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char getpeerucred ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_getpeerucred || defined __stub___getpeerucred
-choke me
-#endif
-
-int
-main ()
-{
-return getpeerucred ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_getpeerucred=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_getpeerucred=no
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_getpeerucred" >&5
-$as_echo "$ac_cv_func_getpeerucred" >&6; }
-if test "x$ac_cv_func_getpeerucred" = x""yes; then
+ac_fn_c_check_func "$LINENO" "getpeereid" "ac_cv_func_getpeereid"
+if test "x$ac_cv_func_getpeereid" = x""yes; then :
 
-cat >>confdefs.h <<\_ACEOF
-#define HAS_GETPEERUCRED 1
-_ACEOF
+$as_echo "#define HAS_GETPEEREID 1" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for strlcat" >&5
-$as_echo_n "checking for strlcat... " >&6; }
-if test "${ac_cv_func_strlcat+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define strlcat to an innocuous variant, in case <limits.h> declares strlcat.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define strlcat innocuous_strlcat
+ac_fn_c_check_func "$LINENO" "getpeerucred" "ac_cv_func_getpeerucred"
+if test "x$ac_cv_func_getpeerucred" = x""yes; then :
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char strlcat (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+$as_echo "#define HAS_GETPEERUCRED 1" >>confdefs.h
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef strlcat
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strlcat ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_strlcat || defined __stub___strlcat
-choke me
-#endif
-
-int
-main ()
-{
-return strlcat ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_strlcat=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_strlcat=no
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_strlcat" >&5
-$as_echo "$ac_cv_func_strlcat" >&6; }
-if test "x$ac_cv_func_strlcat" = x""yes; then
+ac_fn_c_check_func "$LINENO" "strlcat" "ac_cv_func_strlcat"
+if test "x$ac_cv_func_strlcat" = x""yes; then :
   HAVE_STRLCAT=yes
 else
   HAVE_STRLCAT=no
@@ -16936,96 +13879,10 @@ else
   NEED_STRLCAT_FALSE=
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for strlcpy" >&5
-$as_echo_n "checking for strlcpy... " >&6; }
-if test "${ac_cv_func_strlcpy+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define strlcpy to an innocuous variant, in case <limits.h> declares strlcpy.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define strlcpy innocuous_strlcpy
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char strlcpy (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+ac_fn_c_check_func "$LINENO" "strlcpy" "ac_cv_func_strlcpy"
+if test "x$ac_cv_func_strlcpy" = x""yes; then :
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef strlcpy
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strlcpy ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_strlcpy || defined __stub___strlcpy
-choke me
-#endif
-
-int
-main ()
-{
-return strlcpy ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_strlcpy=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_strlcpy=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_strlcpy" >&5
-$as_echo "$ac_cv_func_strlcpy" >&6; }
-if test "x$ac_cv_func_strlcpy" = x""yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAS_STRLCPY 1
-_ACEOF
+$as_echo "#define HAS_STRLCPY 1" >>confdefs.h
 
 fi
 
@@ -17039,113 +13896,22 @@ else
 fi
 
 
-{ $as_echo "$as_me:$LINENO: checking for mmap" >&5
-$as_echo_n "checking for mmap... " >&6; }
-if test "${ac_cv_func_mmap+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define mmap to an innocuous variant, in case <limits.h> declares mmap.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define mmap innocuous_mmap
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char mmap (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef mmap
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char mmap ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_mmap || defined __stub___mmap
-choke me
-#endif
-
-int
-main ()
-{
-return mmap ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_mmap=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_mmap=no
-fi
+ac_fn_c_check_func "$LINENO" "mmap" "ac_cv_func_mmap"
+if test "x$ac_cv_func_mmap" = x""yes; then :
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_mmap" >&5
-$as_echo "$ac_cv_func_mmap" >&6; }
-if test "x$ac_cv_func_mmap" = x""yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAS_MMAP 1
-_ACEOF
+$as_echo "#define HAS_MMAP 1" >>confdefs.h
 
 fi
 
 
-
-{ $as_echo "$as_me:$LINENO: checking for sqrt in -lm" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sqrt in -lm" >&5
 $as_echo_n "checking for sqrt in -lm... " >&6; }
-if test "${ac_cv_lib_m_sqrt+set}" = set; then
+if test "${ac_cv_lib_m_sqrt+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lm  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -17163,43 +13929,18 @@ return sqrt ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_m_sqrt=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_m_sqrt=no
+  ac_cv_lib_m_sqrt=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_m_sqrt" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_sqrt" >&5
 $as_echo "$ac_cv_lib_m_sqrt" >&6; }
-if test "x$ac_cv_lib_m_sqrt" = x""yes; then
+if test "x$ac_cv_lib_m_sqrt" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBM 1
 _ACEOF
@@ -17208,18 +13949,14 @@ _ACEOF
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for cbrt in -lm" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cbrt in -lm" >&5
 $as_echo_n "checking for cbrt in -lm... " >&6; }
-if test "${ac_cv_lib_m_cbrt+set}" = set; then
+if test "${ac_cv_lib_m_cbrt+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lm  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -17237,196 +13974,30 @@ return cbrt ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_m_cbrt=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_m_cbrt=no
+  ac_cv_lib_m_cbrt=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_m_cbrt" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cbrt" >&5
 $as_echo "$ac_cv_lib_m_cbrt" >&6; }
-if test "x$ac_cv_lib_m_cbrt" = x""yes; then
+if test "x$ac_cv_lib_m_cbrt" = x""yes; then :
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_CBRT 1
-_ACEOF
+$as_echo "#define HAVE_CBRT 1" >>confdefs.h
 
 fi
 
 
-
-
-
 for ac_header in ndbm.h dbm.h rpcsvc/dbm.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -17436,150 +14007,12 @@ fi
 done
 
 
-
-
 for ac_header in linux/agpgart.h sys/agpio.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -17597,151 +14030,12 @@ else
 fi
 
 
-
 for ac_header in linux/apm_bios.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "linux/apm_bios.h" "ac_cv_header_linux_apm_bios_h" "$ac_includes_default"
+if test "x$ac_cv_header_linux_apm_bios_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_LINUX_APM_BIOS_H 1
 _ACEOF
  LNXAPM=yes
 fi
@@ -17757,151 +14051,12 @@ else
 fi
 
 
-
 for ac_header in linux/fb.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "linux/fb.h" "ac_cv_header_linux_fb_h" "$ac_includes_default"
+if test "x$ac_cv_header_linux_fb_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_LINUX_FB_H 1
 _ACEOF
  FBDEV=yes
 fi
@@ -17917,151 +14072,12 @@ else
 fi
 
 
-
 for ac_header in asm/mtrr.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "asm/mtrr.h" "ac_cv_header_asm_mtrr_h" "$ac_includes_default"
+if test "x$ac_cv_header_asm_mtrr_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_ASM_MTRR_H 1
 _ACEOF
  ac_cv_asm_mtrr_h=yes
 fi
@@ -18072,151 +14088,12 @@ if test "x$ac_cv_asm_mtrr_h" = xyes; then
 	HAVE_MTRR=yes
 fi
 
-
 for ac_header in sys/memrange.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "sys/memrange.h" "ac_cv_header_sys_memrange_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_memrange_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_SYS_MEMRANGE_H 1
 _ACEOF
  ac_cv_memrange_h=yes
 fi
@@ -18229,157 +14106,16 @@ fi
 
 if test "x$HAVE_MTRR" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAS_MTRR_SUPPORT 1
-_ACEOF
+$as_echo "#define HAS_MTRR_SUPPORT 1" >>confdefs.h
 
 fi
 
-
 for ac_header in machine/mtrr.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "machine/mtrr.h" "ac_cv_header_machine_mtrr_h" "$ac_includes_default"
+if test "x$ac_cv_header_machine_mtrr_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_MACHINE_MTRR_H 1
 _ACEOF
  ac_cv_machine_mtrr_h=yes
 fi
@@ -18388,68 +14124,17 @@ done
 
 if test "x$ac_cv_machine_mtrr_h" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAS_MTRR_BUILTIN 1
-_ACEOF
+$as_echo "#define HAS_MTRR_BUILTIN 1" >>confdefs.h
 
 fi
 
-
 for ac_header in sys/linker.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/param.h>
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  eval "$as_ac_Header=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_header_compile "$LINENO" "sys/linker.h" "ac_cv_header_sys_linker_h" "#include <sys/param.h>
+"
+if test "x$ac_cv_header_sys_linker_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_SYS_LINKER_H 1
 _ACEOF
  ac_cv_sys_linker_h=yes
 else
@@ -18467,16 +14152,12 @@ else
 fi
 
 
-{ $as_echo "$as_me:$LINENO: checking for SYSV IPC" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SYSV IPC" >&5
 $as_echo_n "checking for SYSV IPC... " >&6; }
-if test "${ac_cv_sysv_ipc+set}" = set; then
+if test "${ac_cv_sysv_ipc+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #include <sys/types.h>
@@ -18497,324 +14178,33 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_sysv_ipc=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_sysv_ipc=no
+  ac_cv_sysv_ipc=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_sysv_ipc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sysv_ipc" >&5
 $as_echo "$ac_cv_sysv_ipc" >&6; }
 if test "x$ac_cv_sysv_ipc" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SYSV_IPC 1
-_ACEOF
+$as_echo "#define HAVE_SYSV_IPC 1" >>confdefs.h
 
 fi
 
 if test -c /dev/xf86 ; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAS_APERTURE_DRV 1
-_ACEOF
-
-fi
-
-if test "${ac_cv_header_machine_apmvar_h+set}" = set; then
-  { $as_echo "$as_me:$LINENO: checking for machine/apmvar.h" >&5
-$as_echo_n "checking for machine/apmvar.h... " >&6; }
-if test "${ac_cv_header_machine_apmvar_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_machine_apmvar_h" >&5
-$as_echo "$ac_cv_header_machine_apmvar_h" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking machine/apmvar.h usability" >&5
-$as_echo_n "checking machine/apmvar.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <machine/apmvar.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
+$as_echo "#define HAS_APERTURE_DRV 1" >>confdefs.h
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking machine/apmvar.h presence" >&5
-$as_echo_n "checking machine/apmvar.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <machine/apmvar.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
 fi
 
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
+ac_fn_c_check_header_mongrel "$LINENO" "machine/apmvar.h" "ac_cv_header_machine_apmvar_h" "$ac_includes_default"
+if test "x$ac_cv_header_machine_apmvar_h" = x""yes; then :
 
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: machine/apmvar.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: machine/apmvar.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: machine/apmvar.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: machine/apmvar.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: machine/apmvar.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: machine/apmvar.h: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: machine/apmvar.h:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: machine/apmvar.h:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: machine/apmvar.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: machine/apmvar.h: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: machine/apmvar.h:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: machine/apmvar.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: machine/apmvar.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: machine/apmvar.h: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: machine/apmvar.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: machine/apmvar.h: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for machine/apmvar.h" >&5
-$as_echo_n "checking for machine/apmvar.h... " >&6; }
-if test "${ac_cv_header_machine_apmvar_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_header_machine_apmvar_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_machine_apmvar_h" >&5
-$as_echo "$ac_cv_header_machine_apmvar_h" >&6; }
-
-fi
-if test "x$ac_cv_header_machine_apmvar_h" = x""yes; then
-
-	if test "${ac_cv_header_sys_event_h+set}" = set; then
-  { $as_echo "$as_me:$LINENO: checking for sys/event.h" >&5
-$as_echo_n "checking for sys/event.h... " >&6; }
-if test "${ac_cv_header_sys_event_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_event_h" >&5
-$as_echo "$ac_cv_header_sys_event_h" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking sys/event.h usability" >&5
-$as_echo_n "checking sys/event.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <sys/event.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking sys/event.h presence" >&5
-$as_echo_n "checking sys/event.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/event.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: sys/event.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: sys/event.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/event.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: sys/event.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: sys/event.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: sys/event.h: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/event.h:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: sys/event.h:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/event.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: sys/event.h: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/event.h:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: sys/event.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/event.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: sys/event.h: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: sys/event.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: sys/event.h: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for sys/event.h" >&5
-$as_echo_n "checking for sys/event.h... " >&6; }
-if test "${ac_cv_header_sys_event_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_header_sys_event_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_event_h" >&5
-$as_echo "$ac_cv_header_sys_event_h" >&6; }
-
-fi
-if test "x$ac_cv_header_sys_event_h" = x""yes; then
+	ac_fn_c_check_header_mongrel "$LINENO" "sys/event.h" "ac_cv_header_sys_event_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_event_h" = x""yes; then :
   ac_cv_BSD_KQUEUE_APM=yes
 else
   ac_cv_BSD_APM=yes
@@ -18842,152 +14232,17 @@ else
 fi
 
 
-if test "${ac_cv_header_execinfo_h+set}" = set; then
-  { $as_echo "$as_me:$LINENO: checking for execinfo.h" >&5
-$as_echo_n "checking for execinfo.h... " >&6; }
-if test "${ac_cv_header_execinfo_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_execinfo_h" >&5
-$as_echo "$ac_cv_header_execinfo_h" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking execinfo.h usability" >&5
-$as_echo_n "checking execinfo.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <execinfo.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking execinfo.h presence" >&5
-$as_echo_n "checking execinfo.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <execinfo.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: execinfo.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: execinfo.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: execinfo.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: execinfo.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: execinfo.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: execinfo.h: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: execinfo.h:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: execinfo.h:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: execinfo.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: execinfo.h: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: execinfo.h:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: execinfo.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: execinfo.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: execinfo.h: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: execinfo.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: execinfo.h: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for execinfo.h" >&5
-$as_echo_n "checking for execinfo.h... " >&6; }
-if test "${ac_cv_header_execinfo_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_header_execinfo_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_execinfo_h" >&5
-$as_echo "$ac_cv_header_execinfo_h" >&6; }
-
-fi
-if test "x$ac_cv_header_execinfo_h" = x""yes; then
+ac_fn_c_check_header_mongrel "$LINENO" "execinfo.h" "ac_cv_header_execinfo_h" "$ac_includes_default"
+if test "x$ac_cv_header_execinfo_h" = x""yes; then :
 
-    { $as_echo "$as_me:$LINENO: checking for backtrace in -lc" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for backtrace in -lc" >&5
 $as_echo_n "checking for backtrace in -lc... " >&6; }
-if test "${ac_cv_lib_c_backtrace+set}" = set; then
+if test "${ac_cv_lib_c_backtrace+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lc  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -19005,53 +14260,24 @@ return backtrace ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_c_backtrace=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_c_backtrace=no
+  ac_cv_lib_c_backtrace=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_c_backtrace" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_backtrace" >&5
 $as_echo "$ac_cv_lib_c_backtrace" >&6; }
-if test "x$ac_cv_lib_c_backtrace" = x""yes; then
+if test "x$ac_cv_lib_c_backtrace" = x""yes; then :
 
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_BACKTRACE 1
-_ACEOF
+$as_echo "#define HAVE_BACKTRACE 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_EXECINFO_H 1
-_ACEOF
+$as_echo "#define HAVE_EXECINFO_H 1" >>confdefs.h
 
 
 fi
@@ -19070,9 +14296,7 @@ case $host_cpu in
 	case $host_os in
 	        *freebsd*)	SYS_LIBS=-lio ;;
 		*netbsd*)
-cat >>confdefs.h <<\_ACEOF
-#define USE_ALPHA_PIO 1
-_ACEOF
+$as_echo "#define USE_ALPHA_PIO 1" >>confdefs.h
  ;;
 	esac
 	GLX_ARCH_DEFINES="-D__GLX_ALIGN64 -mieee"
@@ -19083,23 +14307,15 @@ _ACEOF
   i*86)
 	I386_VIDEO=yes
 	case $host_os in
-		*freebsd*)	cat >>confdefs.h <<\_ACEOF
-#define USE_DEV_IO 1
-_ACEOF
+		*freebsd*)	$as_echo "#define USE_DEV_IO 1" >>confdefs.h
  ;;
-		*dragonfly*)	cat >>confdefs.h <<\_ACEOF
-#define USE_DEV_IO 1
-_ACEOF
+		*dragonfly*)	$as_echo "#define USE_DEV_IO 1" >>confdefs.h
  ;;
-		*netbsd*)	cat >>confdefs.h <<\_ACEOF
-#define USE_I386_IOPL 1
-_ACEOF
+		*netbsd*)	$as_echo "#define USE_I386_IOPL 1" >>confdefs.h
 
 				SYS_LIBS=-li386
 				;;
-		*openbsd*)	cat >>confdefs.h <<\_ACEOF
-#define USE_I386_IOPL 1
-_ACEOF
+		*openbsd*)	$as_echo "#define USE_I386_IOPL 1" >>confdefs.h
 
 				SYS_LIBS=-li386
 				;;
@@ -19120,26 +14336,18 @@ _ACEOF
 	I386_VIDEO=yes
 	case $host_os in
 		*freebsd*)
-cat >>confdefs.h <<\_ACEOF
-#define USE_DEV_IO 1
-_ACEOF
+$as_echo "#define USE_DEV_IO 1" >>confdefs.h
  ;;
 		*dragonfly*)
-cat >>confdefs.h <<\_ACEOF
-#define USE_DEV_IO 1
-_ACEOF
+$as_echo "#define USE_DEV_IO 1" >>confdefs.h
  ;;
 		*netbsd*)
-cat >>confdefs.h <<\_ACEOF
-#define USE_I386_IOPL 1
-_ACEOF
+$as_echo "#define USE_I386_IOPL 1" >>confdefs.h
 
 				SYS_LIBS=-lx86_64
 				;;
 		*openbsd*)
-cat >>confdefs.h <<\_ACEOF
-#define USE_AMD64_IOPL 1
-_ACEOF
+$as_echo "#define USE_AMD64_IOPL 1" >>confdefs.h
 
 				SYS_LIBS=-lamd64
 				;;
@@ -19203,66 +14411,44 @@ case $host_os in
 	case $host_os in
 		kfreebsd*-gnu) ;;
 		*)
-cat >>confdefs.h <<\_ACEOF
-#define CSRG_BASED 1
-_ACEOF
+$as_echo "#define CSRG_BASED 1" >>confdefs.h
  ;;
 	esac
 
-cat >>confdefs.h <<\_ACEOF
-#define PCCONS_SUPPORT 1
-_ACEOF
+$as_echo "#define PCCONS_SUPPORT 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define PCVT_SUPPORT 1
-_ACEOF
+$as_echo "#define PCVT_SUPPORT 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define SYSCONS_SUPPORT 1
-_ACEOF
+$as_echo "#define SYSCONS_SUPPORT 1" >>confdefs.h
 
 	DRI=yes
 	;;
   *netbsd*)
 
-cat >>confdefs.h <<\_ACEOF
-#define CSRG_BASED 1
-_ACEOF
+$as_echo "#define CSRG_BASED 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define PCCONS_SUPPORT 1
-_ACEOF
+$as_echo "#define PCCONS_SUPPORT 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define PCVT_SUPPORT 1
-_ACEOF
+$as_echo "#define PCVT_SUPPORT 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define WSCONS_SUPPORT 1
-_ACEOF
+$as_echo "#define WSCONS_SUPPORT 1" >>confdefs.h
 
 	DRI=yes
 	;;
   *openbsd*)
 
-cat >>confdefs.h <<\_ACEOF
-#define CSRG_BASED 1
-_ACEOF
+$as_echo "#define CSRG_BASED 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define PCVT_SUPPORT 1
-_ACEOF
+$as_echo "#define PCVT_SUPPORT 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define WSCONS_SUPPORT 1
-_ACEOF
+$as_echo "#define WSCONS_SUPPORT 1" >>confdefs.h
 
 	;;
   *linux*)
@@ -19271,11 +14457,11 @@ _ACEOF
 	;;
   *solaris*)
 	if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libdrm\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libdrm\""; } >&5
   ($PKG_CONFIG --exists --print-errors "libdrm") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   DRI=yes
 else
   DRI=no
@@ -19283,9 +14469,7 @@ fi
 	;;
   darwin*)
 
-cat >>confdefs.h <<\_ACEOF
-#define CSRG_BASED 1
-_ACEOF
+$as_echo "#define CSRG_BASED 1" >>confdefs.h
 
 	;;
 esac
@@ -19301,7 +14485,7 @@ fi
 
 
 # Check whether --with-release-version was given.
-if test "${with_release_version+set}" = set; then
+if test "${with_release_version+set}" = set; then :
   withval=$with_release_version; RELEASE_VERSION="$withval"
 else
   RELEASE_VERSION=""
@@ -19310,7 +14494,7 @@ fi
 	if test "x$RELEASE_VERSION" != "x"; then
 		PACKAGE="$PACKAGE-$RELEASE_VERSION"
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-		{ $as_echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: Building with package name set to $PACKAGE" >&5
 $as_echo "$as_me: Building with package name set to $PACKAGE" >&6;}
 	fi
 
@@ -19353,14 +14537,14 @@ VENDOR_WEB="http://wiki.x.org"
 
 
 # Check whether --enable-werror was given.
-if test "${enable_werror+set}" = set; then
+if test "${enable_werror+set}" = set; then :
   enableval=$enable_werror; WERROR=$enableval
 else
   WERROR=no
 fi
 
 # Check whether --enable-debug was given.
-if test "${enable_debug+set}" = set; then
+if test "${enable_debug+set}" = set; then :
   enableval=$enable_debug; DEBUGGING=$enableval
 else
   DEBUGGING=no
@@ -19368,7 +14552,7 @@ fi
 
 
 # Check whether --with-int10 was given.
-if test "${with_int10+set}" = set; then
+if test "${with_int10+set}" = set; then :
   withval=$with_int10; INT10="$withval"
 else
   INT10="$DEFAULT_INT10"
@@ -19376,25 +14560,25 @@ fi
 
 
 # Check whether --with-vendor-name was given.
-if test "${with_vendor_name+set}" = set; then
+if test "${with_vendor_name+set}" = set; then :
   withval=$with_vendor_name;  VENDOR_NAME="$withval"
 fi
 
 
 # Check whether --with-vendor-name-short was given.
-if test "${with_vendor_name_short+set}" = set; then
+if test "${with_vendor_name_short+set}" = set; then :
   withval=$with_vendor_name_short;  VENDOR_NAME_SHORT="$withval"
 fi
 
 
 # Check whether --with-vendor-web was given.
-if test "${with_vendor_web+set}" = set; then
+if test "${with_vendor_web+set}" = set; then :
   withval=$with_vendor_web;  VENDOR_WEB="$withval"
 fi
 
 
 # Check whether --with-module-dir was given.
-if test "${with_module_dir+set}" = set; then
+if test "${with_module_dir+set}" = set; then :
   withval=$with_module_dir;  moduledir="$withval"
 else
    moduledir="${libdir}/xorg/modules"
@@ -19402,7 +14586,7 @@ fi
 
 
 # Check whether --with-log-dir was given.
-if test "${with_log_dir+set}" = set; then
+if test "${with_log_dir+set}" = set; then :
   withval=$with_log_dir;  logdir="$withval"
 else
    logdir="$localstatedir/log"
@@ -19410,7 +14594,7 @@ fi
 
 
 # Check whether --with-builder-addr was given.
-if test "${with_builder_addr+set}" = set; then
+if test "${with_builder_addr+set}" = set; then :
   withval=$with_builder_addr;  BUILDERADDR="$withval"
 else
    BUILDERADDR="xorg@lists.freedesktop.org"
@@ -19418,7 +14602,7 @@ fi
 
 
 # Check whether --with-os-name was given.
-if test "${with_os_name+set}" = set; then
+if test "${with_os_name+set}" = set; then :
   withval=$with_os_name;  OSNAME="$withval"
 else
    OSNAME=`uname -srm`
@@ -19426,7 +14610,7 @@ fi
 
 
 # Check whether --with-os-vendor was given.
-if test "${with_os_vendor+set}" = set; then
+if test "${with_os_vendor+set}" = set; then :
   withval=$with_os_vendor;  OSVENDOR="$withval"
 else
    OSVENDOR=""
@@ -19434,14 +14618,14 @@ fi
 
 
 # Check whether --with-builderstring was given.
-if test "${with_builderstring+set}" = set; then
+if test "${with_builderstring+set}" = set; then :
   withval=$with_builderstring;  BUILDERSTRING="$withval"
 
 fi
 
 
 # Check whether --with-fontdir was given.
-if test "${with_fontdir+set}" = set; then
+if test "${with_fontdir+set}" = set; then :
   withval=$with_fontdir;  FONTDIR="$withval"
 else
    FONTDIR="${libdir}/X11/fonts"
@@ -19453,7 +14637,7 @@ case $host_os in
 esac
 
 # Check whether --with-default-font-path was given.
-if test "${with_default_font_path+set}" = set; then
+if test "${with_default_font_path+set}" = set; then :
   withval=$with_default_font_path;  FONTPATH="$withval"
 else
    FONTPATH="${DEFAULT_FONT_PATH}"
@@ -19461,7 +14645,7 @@ fi
 
 
 # Check whether --with-xkb-path was given.
-if test "${with_xkb_path+set}" = set; then
+if test "${with_xkb_path+set}" = set; then :
   withval=$with_xkb_path;  XKBPATH="$withval"
 else
    XKBPATH="${datadir}/X11/xkb"
@@ -19469,7 +14653,7 @@ fi
 
 
 # Check whether --with-xkb-output was given.
-if test "${with_xkb_output+set}" = set; then
+if test "${with_xkb_output+set}" = set; then :
   withval=$with_xkb_output;  XKBOUTPUT="$withval"
 else
    XKBOUTPUT="compiled"
@@ -19477,7 +14661,7 @@ fi
 
 
 # Check whether --with-serverconfig-path was given.
-if test "${with_serverconfig_path+set}" = set; then
+if test "${with_serverconfig_path+set}" = set; then :
   withval=$with_serverconfig_path;  SERVERCONFIG="$withval"
 else
    SERVERCONFIG="${libdir}/xorg"
@@ -19485,7 +14669,7 @@ fi
 
 
 # Check whether --with-apple-applications-dir was given.
-if test "${with_apple_applications_dir+set}" = set; then
+if test "${with_apple_applications_dir+set}" = set; then :
   withval=$with_apple_applications_dir;  APPLE_APPLICATIONS_DIR="${withval}"
 else
    APPLE_APPLICATIONS_DIR="/Applications/Utilities"
@@ -19494,7 +14678,7 @@ fi
 
 
 # Check whether --with-apple-application-name was given.
-if test "${with_apple_application_name+set}" = set; then
+if test "${with_apple_application_name+set}" = set; then :
   withval=$with_apple_application_name;  APPLE_APPLICATION_NAME="${withval}"
 else
    APPLE_APPLICATION_NAME="X11"
@@ -19503,7 +14687,7 @@ fi
 
 
 # Check whether --with-apple-application-id was given.
-if test "${with_apple_application_id+set}" = set; then
+if test "${with_apple_application_id+set}" = set; then :
   withval=$with_apple_application_id;  APPLE_APPLICATION_ID="${withval}"
 else
    APPLE_APPLICATION_ID="org.x.X11"
@@ -19511,21 +14695,21 @@ fi
 
 
 # Check whether --enable-builddocs was given.
-if test "${enable_builddocs+set}" = set; then
+if test "${enable_builddocs+set}" = set; then :
   enableval=$enable_builddocs; BUILDDOCS=$enableval
 else
   BUILDDOCS=no
 fi
 
 # Check whether --enable-install-libxf86config was given.
-if test "${enable_install_libxf86config+set}" = set; then
+if test "${enable_install_libxf86config+set}" = set; then :
   enableval=$enable_install_libxf86config; INSTALL_LIBXF86CONFIG=$enableval
 else
   INSTALL_LIBXF86CONFIG=no
 fi
 
 # Check whether --enable-null-root-cursor was given.
-if test "${enable_null_root_cursor+set}" = set; then
+if test "${enable_null_root_cursor+set}" = set; then :
   enableval=$enable_null_root_cursor; NULL_ROOT_CURSOR=$enableval
 else
   NULL_ROOT_CURSOR=no
@@ -19534,7 +14718,7 @@ fi
 
 
 # Check whether --with-mesa-source was given.
-if test "${with_mesa_source+set}" = set; then
+if test "${with_mesa_source+set}" = set; then :
   withval=$with_mesa_source;  MESA_SOURCE="$withval"
 else
    MESA_SOURCE=""
@@ -19542,21 +14726,21 @@ fi
 
 
 # Check whether --with-dri-driver-path was given.
-if test "${with_dri_driver_path+set}" = set; then
+if test "${with_dri_driver_path+set}" = set; then :
   withval=$with_dri_driver_path;  DRI_DRIVER_PATH="$withval"
 else
    DRI_DRIVER_PATH="${libdir}/dri"
 fi
 
 # Check whether --enable-aiglx was given.
-if test "${enable_aiglx+set}" = set; then
+if test "${enable_aiglx+set}" = set; then :
   enableval=$enable_aiglx; AIGLX=$enableval
 else
   AIGLX=yes
 fi
 
 # Check whether --enable-glx-tls was given.
-if test "${enable_glx_tls+set}" = set; then
+if test "${enable_glx_tls+set}" = set; then :
   enableval=$enable_glx_tls; GLX_USE_TLS=$enableval
 else
   GLX_USE_TLS=no
@@ -19564,194 +14748,194 @@ fi
 
 
 # Check whether --enable-registry was given.
-if test "${enable_registry+set}" = set; then
+if test "${enable_registry+set}" = set; then :
   enableval=$enable_registry; XREGISTRY=$enableval
 else
   XREGISTRY=yes
 fi
 
 # Check whether --enable-composite was given.
-if test "${enable_composite+set}" = set; then
+if test "${enable_composite+set}" = set; then :
   enableval=$enable_composite; COMPOSITE=$enableval
 else
   COMPOSITE=yes
 fi
 
 # Check whether --enable-mitshm was given.
-if test "${enable_mitshm+set}" = set; then
+if test "${enable_mitshm+set}" = set; then :
   enableval=$enable_mitshm; MITSHM=$enableval
 else
   MITSHM=yes
 fi
 
 # Check whether --enable-xres was given.
-if test "${enable_xres+set}" = set; then
+if test "${enable_xres+set}" = set; then :
   enableval=$enable_xres; RES=$enableval
 else
   RES=yes
 fi
 
 # Check whether --enable-record was given.
-if test "${enable_record+set}" = set; then
+if test "${enable_record+set}" = set; then :
   enableval=$enable_record; RECORD=$enableval
 else
   RECORD=no
 fi
 
 # Check whether --enable-xv was given.
-if test "${enable_xv+set}" = set; then
+if test "${enable_xv+set}" = set; then :
   enableval=$enable_xv; XV=$enableval
 else
   XV=yes
 fi
 
 # Check whether --enable-xvmc was given.
-if test "${enable_xvmc+set}" = set; then
+if test "${enable_xvmc+set}" = set; then :
   enableval=$enable_xvmc; XVMC=$enableval
 else
   XVMC=yes
 fi
 
 # Check whether --enable-dga was given.
-if test "${enable_dga+set}" = set; then
+if test "${enable_dga+set}" = set; then :
   enableval=$enable_dga; DGA=$enableval
 else
   DGA=auto
 fi
 
 # Check whether --enable-screensaver was given.
-if test "${enable_screensaver+set}" = set; then
+if test "${enable_screensaver+set}" = set; then :
   enableval=$enable_screensaver; SCREENSAVER=$enableval
 else
   SCREENSAVER=yes
 fi
 
 # Check whether --enable-xdmcp was given.
-if test "${enable_xdmcp+set}" = set; then
+if test "${enable_xdmcp+set}" = set; then :
   enableval=$enable_xdmcp; XDMCP=$enableval
 else
   XDMCP=auto
 fi
 
 # Check whether --enable-xdm-auth-1 was given.
-if test "${enable_xdm_auth_1+set}" = set; then
+if test "${enable_xdm_auth_1+set}" = set; then :
   enableval=$enable_xdm_auth_1; XDMAUTH=$enableval
 else
   XDMAUTH=auto
 fi
 
 # Check whether --enable-glx was given.
-if test "${enable_glx+set}" = set; then
+if test "${enable_glx+set}" = set; then :
   enableval=$enable_glx; GLX=$enableval
 else
   GLX=yes
 fi
 
 # Check whether --enable-dri was given.
-if test "${enable_dri+set}" = set; then
+if test "${enable_dri+set}" = set; then :
   enableval=$enable_dri; DRI=$enableval
 fi
 
 # Check whether --enable-dri2 was given.
-if test "${enable_dri2+set}" = set; then
+if test "${enable_dri2+set}" = set; then :
   enableval=$enable_dri2; DRI2=$enableval
 else
   DRI2=auto
 fi
 
 # Check whether --enable-xinerama was given.
-if test "${enable_xinerama+set}" = set; then
+if test "${enable_xinerama+set}" = set; then :
   enableval=$enable_xinerama; XINERAMA=$enableval
 else
   XINERAMA=yes
 fi
 
 # Check whether --enable-xf86vidmode was given.
-if test "${enable_xf86vidmode+set}" = set; then
+if test "${enable_xf86vidmode+set}" = set; then :
   enableval=$enable_xf86vidmode; XF86VIDMODE=$enableval
 else
   XF86VIDMODE=auto
 fi
 
 # Check whether --enable-xace was given.
-if test "${enable_xace+set}" = set; then
+if test "${enable_xace+set}" = set; then :
   enableval=$enable_xace; XACE=$enableval
 else
   XACE=yes
 fi
 
 # Check whether --enable-xselinux was given.
-if test "${enable_xselinux+set}" = set; then
+if test "${enable_xselinux+set}" = set; then :
   enableval=$enable_xselinux; XSELINUX=$enableval
 else
   XSELINUX=no
 fi
 
 # Check whether --enable-xcsecurity was given.
-if test "${enable_xcsecurity+set}" = set; then
+if test "${enable_xcsecurity+set}" = set; then :
   enableval=$enable_xcsecurity; XCSECURITY=$enableval
 else
   XCSECURITY=no
 fi
 
 # Check whether --enable-xcalibrate was given.
-if test "${enable_xcalibrate+set}" = set; then
+if test "${enable_xcalibrate+set}" = set; then :
   enableval=$enable_xcalibrate; XCALIBRATE=$enableval
 else
   XCALIBRATE=no
 fi
 
 # Check whether --enable-tslib was given.
-if test "${enable_tslib+set}" = set; then
+if test "${enable_tslib+set}" = set; then :
   enableval=$enable_tslib; TSLIB=$enableval
 else
   TSLIB=no
 fi
 
 # Check whether --enable-multibuffer was given.
-if test "${enable_multibuffer+set}" = set; then
+if test "${enable_multibuffer+set}" = set; then :
   enableval=$enable_multibuffer; MULTIBUFFER=$enableval
 else
   MULTIBUFFER=no
 fi
 
 # Check whether --enable-dbe was given.
-if test "${enable_dbe+set}" = set; then
+if test "${enable_dbe+set}" = set; then :
   enableval=$enable_dbe; DBE=$enableval
 else
   DBE=yes
 fi
 
 # Check whether --enable-xf86bigfont was given.
-if test "${enable_xf86bigfont+set}" = set; then
+if test "${enable_xf86bigfont+set}" = set; then :
   enableval=$enable_xf86bigfont; XF86BIGFONT=$enableval
 else
   XF86BIGFONT=no
 fi
 
 # Check whether --enable-dpms was given.
-if test "${enable_dpms+set}" = set; then
+if test "${enable_dpms+set}" = set; then :
   enableval=$enable_dpms; DPMSExtension=$enableval
 else
   DPMSExtension=yes
 fi
 
 # Check whether --enable-config-dbus was given.
-if test "${enable_config_dbus+set}" = set; then
+if test "${enable_config_dbus+set}" = set; then :
   enableval=$enable_config_dbus; CONFIG_DBUS_API=$enableval
 else
   CONFIG_DBUS_API=no
 fi
 
 # Check whether --enable-config-hal was given.
-if test "${enable_config_hal+set}" = set; then
+if test "${enable_config_hal+set}" = set; then :
   enableval=$enable_config_hal; CONFIG_HAL=$enableval
 else
   CONFIG_HAL=auto
 fi
 
 # Check whether --enable-xfree86-utils was given.
-if test "${enable_xfree86_utils+set}" = set; then
+if test "${enable_xfree86_utils+set}" = set; then :
   enableval=$enable_xfree86_utils; XF86UTILS=$enableval
 else
   XF86UTILS=yes
@@ -19759,84 +14943,84 @@ fi
 
 
 # Check whether --enable-xorg was given.
-if test "${enable_xorg+set}" = set; then
+if test "${enable_xorg+set}" = set; then :
   enableval=$enable_xorg; XORG=$enableval
 else
   XORG=auto
 fi
 
 # Check whether --enable-dmx was given.
-if test "${enable_dmx+set}" = set; then
+if test "${enable_dmx+set}" = set; then :
   enableval=$enable_dmx; DMX=$enableval
 else
   DMX=no
 fi
 
 # Check whether --enable-xvfb was given.
-if test "${enable_xvfb+set}" = set; then
+if test "${enable_xvfb+set}" = set; then :
   enableval=$enable_xvfb; XVFB=$enableval
 else
   XVFB=yes
 fi
 
 # Check whether --enable-xnest was given.
-if test "${enable_xnest+set}" = set; then
+if test "${enable_xnest+set}" = set; then :
   enableval=$enable_xnest; XNEST=$enableval
 else
   XNEST=auto
 fi
 
 # Check whether --enable-xquartz was given.
-if test "${enable_xquartz+set}" = set; then
+if test "${enable_xquartz+set}" = set; then :
   enableval=$enable_xquartz; XQUARTZ=$enableval
 else
   XQUARTZ=auto
 fi
 
 # Check whether --enable-standalone-xpbproxy was given.
-if test "${enable_standalone_xpbproxy+set}" = set; then
+if test "${enable_standalone_xpbproxy+set}" = set; then :
   enableval=$enable_standalone_xpbproxy; STANDALONE_XPBPROXY=$enableval
 else
   STANDALONE_XPBPROXY=no
 fi
 
 # Check whether --enable-xwin was given.
-if test "${enable_xwin+set}" = set; then
+if test "${enable_xwin+set}" = set; then :
   enableval=$enable_xwin; XWIN=$enableval
 else
   XWIN=auto
 fi
 
 # Check whether --enable-kdrive was given.
-if test "${enable_kdrive+set}" = set; then
+if test "${enable_kdrive+set}" = set; then :
   enableval=$enable_kdrive; KDRIVE=$enableval
 else
   KDRIVE=no
 fi
 
 # Check whether --enable-xephyr was given.
-if test "${enable_xephyr+set}" = set; then
+if test "${enable_xephyr+set}" = set; then :
   enableval=$enable_xephyr; XEPHYR=$enableval
 else
   XEPHYR=auto
 fi
 
 # Check whether --enable-xsdl was given.
-if test "${enable_xsdl+set}" = set; then
+if test "${enable_xsdl+set}" = set; then :
   enableval=$enable_xsdl; XSDL=$enableval
 else
   XSDL=auto
 fi
 
 # Check whether --enable-xfake was given.
-if test "${enable_xfake+set}" = set; then
+if test "${enable_xfake+set}" = set; then :
   enableval=$enable_xfake; XFAKE=$enableval
 else
   XFAKE=auto
 fi
 
 # Check whether --enable-xfbdev was given.
-if test "${enable_xfbdev+set}" = set; then
+if test "${enable_xfbdev+set}" = set; then :
   enableval=$enable_xfbdev; XFBDEV=$enableval
 else
   XFBDEV=auto
@@ -19845,13 +15029,13 @@ fi
 
 
 # Check whether --enable-install-setuid was given.
-if test "${enable_install_setuid+set}" = set; then
+if test "${enable_install_setuid+set}" = set; then :
   enableval=$enable_install_setuid; SETUID=$enableval
 else
   SETUID=auto
 fi
 
-{ $as_echo "$as_me:$LINENO: checking to see if we can install the Xorg server as root" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if we can install the Xorg server as root" >&5
 $as_echo_n "checking to see if we can install the Xorg server as root... " >&6; }
 if test "x$SETUID" = "xauto" ; then
 	case $host_os in
@@ -19868,7 +15052,7 @@ if test "x$SETUID" = "xauto" ; then
 		rm -f testfile
 	fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $SETUID" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $SETUID" >&5
 $as_echo "$SETUID" >&6; }
  if test "x$SETUID" = "xyes"; then
   INSTALL_SETUID_TRUE=
@@ -19890,53 +15074,45 @@ fi
 	*)	unixdef="yes"  ;;
  esac
  # Check whether --enable-unix-transport was given.
-if test "${enable_unix_transport+set}" = set; then
+if test "${enable_unix_transport+set}" = set; then :
   enableval=$enable_unix_transport; UNIXCONN=$enableval
 else
   UNIXCONN=$unixdef
 fi
 
- { $as_echo "$as_me:$LINENO: checking if Xtrans should support UNIX socket connections" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Xtrans should support UNIX socket connections" >&5
 $as_echo_n "checking if Xtrans should support UNIX socket connections... " >&6; }
  if test "$UNIXCONN" = "yes"; then
 
-cat >>confdefs.h <<\_ACEOF
-#define UNIXCONN 1
-_ACEOF
+$as_echo "#define UNIXCONN 1" >>confdefs.h
 
  fi
- { $as_echo "$as_me:$LINENO: result: $UNIXCONN" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNIXCONN" >&5
 $as_echo "$UNIXCONN" >&6; }
  # Check whether --enable-tcp-transport was given.
-if test "${enable_tcp_transport+set}" = set; then
+if test "${enable_tcp_transport+set}" = set; then :
   enableval=$enable_tcp_transport; TCPCONN=$enableval
 else
   TCPCONN=yes
 fi
 
- { $as_echo "$as_me:$LINENO: checking if Xtrans should support TCP socket connections" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Xtrans should support TCP socket connections" >&5
 $as_echo_n "checking if Xtrans should support TCP socket connections... " >&6; }
- { $as_echo "$as_me:$LINENO: result: $TCPCONN" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TCPCONN" >&5
 $as_echo "$TCPCONN" >&6; }
  if test "$TCPCONN" = "yes"; then
 
-cat >>confdefs.h <<\_ACEOF
-#define TCPCONN 1
-_ACEOF
+$as_echo "#define TCPCONN 1" >>confdefs.h
 
 
  # SVR4 hides these in libraries other than libc
- { $as_echo "$as_me:$LINENO: checking for library containing socket" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing socket" >&5
 $as_echo_n "checking for library containing socket... " >&6; }
-if test "${ac_cv_search_socket+set}" = set; then
+if test "${ac_cv_search_socket+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -19961,69 +15137,38 @@ for ac_lib in '' socket; do
     ac_res=-l$ac_lib
     LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
   fi
-  rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+  if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_search_socket=$ac_res
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext
-  if test "${ac_cv_search_socket+set}" = set; then
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if test "${ac_cv_search_socket+set}" = set; then :
   break
 fi
 done
-if test "${ac_cv_search_socket+set}" = set; then
-  :
+if test "${ac_cv_search_socket+set}" = set; then :
+
 else
   ac_cv_search_socket=no
 fi
 rm conftest.$ac_ext
 LIBS=$ac_func_search_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_socket" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_socket" >&5
 $as_echo "$ac_cv_search_socket" >&6; }
 ac_res=$ac_cv_search_socket
-if test "$ac_res" != no; then
+if test "$ac_res" != no; then :
   test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
 
 fi
 
- { $as_echo "$as_me:$LINENO: checking for library containing gethostbyname" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing gethostbyname" >&5
 $as_echo_n "checking for library containing gethostbyname... " >&6; }
-if test "${ac_cv_search_gethostbyname+set}" = set; then
+if test "${ac_cv_search_gethostbyname+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -20048,71 +15193,39 @@ for ac_lib in '' nsl; do
     ac_res=-l$ac_lib
     LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
   fi
-  rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+  if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_search_gethostbyname=$ac_res
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext
-  if test "${ac_cv_search_gethostbyname+set}" = set; then
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if test "${ac_cv_search_gethostbyname+set}" = set; then :
   break
 fi
 done
-if test "${ac_cv_search_gethostbyname+set}" = set; then
-  :
+if test "${ac_cv_search_gethostbyname+set}" = set; then :
+
 else
   ac_cv_search_gethostbyname=no
 fi
 rm conftest.$ac_ext
 LIBS=$ac_func_search_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_gethostbyname" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_gethostbyname" >&5
 $as_echo "$ac_cv_search_gethostbyname" >&6; }
 ac_res=$ac_cv_search_gethostbyname
-if test "$ac_res" != no; then
+if test "$ac_res" != no; then :
   test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
 
 fi
 
-
-{ $as_echo "$as_me:$LINENO: checking for main in -lws2_32" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lws2_32" >&5
 $as_echo_n "checking for main in -lws2_32... " >&6; }
-if test "${ac_cv_lib_ws2_32_main+set}" = set; then
+if test "${ac_cv_lib_ws2_32_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lws2_32  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 
@@ -20124,43 +15237,18 @@ return main ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_ws2_32_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_ws2_32_main=no
+  ac_cv_lib_ws2_32_main=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ws2_32_main" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ws2_32_main" >&5
 $as_echo "$ac_cv_lib_ws2_32_main" >&6; }
-if test "x$ac_cv_lib_ws2_32_main" = x""yes; then
+if test "x$ac_cv_lib_ws2_32_main" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBWS2_32 1
 _ACEOF
@@ -20173,95 +15261,11 @@ ac_cv_lib_ws2_32=ac_cv_lib_ws2_32_main
 
  # Needs to come after above checks for libsocket & libnsl for SVR4 systems
  # Check whether --enable-ipv6 was given.
-if test "${enable_ipv6+set}" = set; then
+if test "${enable_ipv6+set}" = set; then :
   enableval=$enable_ipv6; IPV6CONN=$enableval
 else
-  { $as_echo "$as_me:$LINENO: checking for getaddrinfo" >&5
-$as_echo_n "checking for getaddrinfo... " >&6; }
-if test "${ac_cv_func_getaddrinfo+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define getaddrinfo to an innocuous variant, in case <limits.h> declares getaddrinfo.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define getaddrinfo innocuous_getaddrinfo
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getaddrinfo (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef getaddrinfo
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char getaddrinfo ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_getaddrinfo || defined __stub___getaddrinfo
-choke me
-#endif
-
-int
-main ()
-{
-return getaddrinfo ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_getaddrinfo=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_getaddrinfo=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_getaddrinfo" >&5
-$as_echo "$ac_cv_func_getaddrinfo" >&6; }
-if test "x$ac_cv_func_getaddrinfo" = x""yes; then
+  ac_fn_c_check_func "$LINENO" "getaddrinfo" "ac_cv_func_getaddrinfo"
+if test "x$ac_cv_func_getaddrinfo" = x""yes; then :
   IPV6CONN=yes
 else
   IPV6CONN=no
@@ -20269,235 +15273,36 @@ fi
 
 fi
 
- { $as_echo "$as_me:$LINENO: checking if IPv6 support should be built" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if IPv6 support should be built" >&5
 $as_echo_n "checking if IPv6 support should be built... " >&6; }
  if test "$IPV6CONN" = "yes"; then
 
-cat >>confdefs.h <<\_ACEOF
-#define IPv6 1
-_ACEOF
+$as_echo "#define IPv6 1" >>confdefs.h
 
  fi
- { $as_echo "$as_me:$LINENO: result: $IPV6CONN" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IPV6CONN" >&5
 $as_echo "$IPV6CONN" >&6; }
 
  # 4.3BSD-Reno added a new member to struct sockaddr_in
- { $as_echo "$as_me:$LINENO: checking for struct sockaddr_in.sin_len" >&5
-$as_echo_n "checking for struct sockaddr_in.sin_len... " >&6; }
-if test "${ac_cv_member_struct_sockaddr_in_sin_len+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-
-int
-main ()
-{
-static struct sockaddr_in ac_aggr;
-if (ac_aggr.sin_len)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_member_struct_sockaddr_in_sin_len=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
+ ac_fn_c_check_member "$LINENO" "struct sockaddr_in" "sin_len" "ac_cv_member_struct_sockaddr_in_sin_len" "
 #include <sys/types.h>
 #include <sys/socket.h>
 #include <netinet/in.h>
 
+"
+if test "x$ac_cv_member_struct_sockaddr_in_sin_len" = x""yes; then :
 
-int
-main ()
-{
-static struct sockaddr_in ac_aggr;
-if (sizeof ac_aggr.sin_len)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_member_struct_sockaddr_in_sin_len=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_member_struct_sockaddr_in_sin_len=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_sockaddr_in_sin_len" >&5
-$as_echo "$ac_cv_member_struct_sockaddr_in_sin_len" >&6; }
-if test "x$ac_cv_member_struct_sockaddr_in_sin_len" = x""yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define BSD44SOCKETS 1
-_ACEOF
+$as_echo "#define BSD44SOCKETS 1" >>confdefs.h
 
 fi
 
 
  # POSIX.1g changed the type of pointer passed to getsockname/getpeername/etc.
- { $as_echo "$as_me:$LINENO: checking for socklen_t" >&5
-$as_echo_n "checking for socklen_t... " >&6; }
-if test "${ac_cv_type_socklen_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_type_socklen_t=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-$ac_includes_default
-#include <sys/socket.h>
-
-int
-main ()
-{
-if (sizeof (socklen_t))
-       return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
+ ac_fn_c_check_type "$LINENO" "socklen_t" "ac_cv_type_socklen_t" "
 $ac_includes_default
 #include <sys/socket.h>
-
-int
-main ()
-{
-if (sizeof ((socklen_t)))
-	  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_type_socklen_t=yes
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5
-$as_echo "$ac_cv_type_socklen_t" >&6; }
-if test "x$ac_cv_type_socklen_t" = x""yes; then
+"
+if test "x$ac_cv_type_socklen_t" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define HAVE_SOCKLEN_T 1
@@ -20514,21 +15319,19 @@ fi
 	*)			localdef="no"  ;;
  esac
  # Check whether --enable-local-transport was given.
-if test "${enable_local_transport+set}" = set; then
+if test "${enable_local_transport+set}" = set; then :
   enableval=$enable_local_transport; LOCALCONN=$enableval
 else
   LOCALCONN=$localdef
 fi
 
- { $as_echo "$as_me:$LINENO: checking if Xtrans should support os-specific local connections" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Xtrans should support os-specific local connections" >&5
 $as_echo_n "checking if Xtrans should support os-specific local connections... " >&6; }
- { $as_echo "$as_me:$LINENO: result: $LOCALCONN" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LOCALCONN" >&5
 $as_echo "$LOCALCONN" >&6; }
  if test "$LOCALCONN" = "yes"; then
 
-cat >>confdefs.h <<\_ACEOF
-#define LOCALCONN 1
-_ACEOF
+$as_echo "#define LOCALCONN 1" >>confdefs.h
 
  fi
 
@@ -20537,7 +15340,7 @@ _ACEOF
 # Secure RPC detection macro from xtrans.m4
 
  # Check whether --enable-secure-rpc was given.
-if test "${enable_secure_rpc+set}" = set; then
+if test "${enable_secure_rpc+set}" = set; then :
   enableval=$enable_secure_rpc; SECURE_RPC=$enableval
 else
   SECURE_RPC="try"
@@ -20546,101 +15349,12 @@ fi
 
  if test "x$SECURE_RPC" = "xyes" -o "x$SECURE_RPC" = "xtry" ; then
 	FOUND_SECURE_RPC="no"
-
-
-for ac_func in authdes_seccreate authdes_create
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+	for ac_func in authdes_seccreate authdes_create
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
@@ -20650,23 +15364,17 @@ done
 
 	if test "x$FOUND_SECURE_RPC" = "xno" ; then
 		if test "x$SECURE_RPC" = "xyes" ; then
-	{ { $as_echo "$as_me:$LINENO: error: Secure RPC requested, but required functions not found" >&5
-$as_echo "$as_me: error: Secure RPC requested, but required functions not found" >&2;}
-   { (exit 1); exit 1; }; }
+	as_fn_error "Secure RPC requested, but required functions not found" "$LINENO" 5
 		fi
 		SECURE_RPC="no"
 	else
-				{ $as_echo "$as_me:$LINENO: checking for library containing getsecretkey" >&5
+				{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing getsecretkey" >&5
 $as_echo_n "checking for library containing getsecretkey... " >&6; }
-if test "${ac_cv_search_getsecretkey+set}" = set; then
+if test "${ac_cv_search_getsecretkey+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -20691,54 +15399,27 @@ for ac_lib in '' rpcsvc; do
     ac_res=-l$ac_lib
     LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
   fi
-  rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+  if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_search_getsecretkey=$ac_res
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext
-  if test "${ac_cv_search_getsecretkey+set}" = set; then
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if test "${ac_cv_search_getsecretkey+set}" = set; then :
   break
 fi
 done
-if test "${ac_cv_search_getsecretkey+set}" = set; then
-  :
+if test "${ac_cv_search_getsecretkey+set}" = set; then :
+
 else
   ac_cv_search_getsecretkey=no
 fi
 rm conftest.$ac_ext
 LIBS=$ac_func_search_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_getsecretkey" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_getsecretkey" >&5
 $as_echo "$ac_cv_search_getsecretkey" >&6; }
 ac_res=$ac_cv_search_getsecretkey
-if test "$ac_res" != no; then
+if test "$ac_res" != no; then :
   test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
 
 fi
@@ -20746,16 +15427,14 @@ fi
 		SECURE_RPC="yes"
 	fi
  fi
- { $as_echo "$as_me:$LINENO: checking if Secure RPC authentication (\"SUN-DES-1\") should be supported" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Secure RPC authentication (\"SUN-DES-1\") should be supported" >&5
 $as_echo_n "checking if Secure RPC authentication (\"SUN-DES-1\") should be supported... " >&6; }
  if test "x$SECURE_RPC" = "xyes" ; then
 
-cat >>confdefs.h <<\_ACEOF
-#define SECURE_RPC 1
-_ACEOF
+$as_echo "#define SECURE_RPC 1" >>confdefs.h
 
  fi
- { $as_echo "$as_me:$LINENO: result: $SECURE_RPC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SECURE_RPC" >&5
 $as_echo "$SECURE_RPC" >&6; }
 
  if test "x$SECURE_RPC" = xyes; then
@@ -20792,150 +15471,12 @@ else
 fi
 
 if test "x$INT10" = xyes; then
-
-
-for ac_header in sys/vm86.h sys/io.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+		for ac_header in sys/vm86.h sys/io.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -20965,28 +15506,24 @@ if test x"$cross_compiling" = x"yes" ; then
   HAVE_DEFS_ENT=no
 else
   as_ac_File=`$as_echo "ac_cv_file_$XORG_SGML_PATH/X11/defs.ent" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $XORG_SGML_PATH/X11/defs.ent" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $XORG_SGML_PATH/X11/defs.ent" >&5
 $as_echo_n "checking for $XORG_SGML_PATH/X11/defs.ent... " >&6; }
-if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
   $as_echo_n "(cached) " >&6
 else
   test "$cross_compiling" = yes &&
-  { { $as_echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
-$as_echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
 if test -r "$XORG_SGML_PATH/X11/defs.ent"; then
   eval "$as_ac_File=yes"
 else
   eval "$as_ac_File=no"
 fi
 fi
-ac_res=`eval 'as_val=${'$as_ac_File'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+eval ac_res=\$$as_ac_File
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_File'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+eval as_val=\$$as_ac_File
+   if test "x$as_val" = x""yes; then :
   HAVE_DEFS_ENT=yes
 fi
 
@@ -20994,9 +15531,9 @@ fi
 
 # Extract the first word of "linuxdoc", so it can be a program name with args.
 set dummy linuxdoc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_LINUXDOC+set}" = set; then
+if test "${ac_cv_path_LINUXDOC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $LINUXDOC in
@@ -21009,14 +15546,14 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_LINUXDOC="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   ;;
@@ -21024,19 +15561,19 @@ esac
 fi
 LINUXDOC=$ac_cv_path_LINUXDOC
 if test -n "$LINUXDOC"; then
-  { $as_echo "$as_me:$LINENO: result: $LINUXDOC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINUXDOC" >&5
 $as_echo "$LINUXDOC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
 # Extract the first word of "ps2pdf", so it can be a program name with args.
 set dummy ps2pdf; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PS2PDF+set}" = set; then
+if test "${ac_cv_path_PS2PDF+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $PS2PDF in
@@ -21049,14 +15586,14 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PS2PDF="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   ;;
@@ -21064,16 +15601,16 @@ esac
 fi
 PS2PDF=$ac_cv_path_PS2PDF
 if test -n "$PS2PDF"; then
-  { $as_echo "$as_me:$LINENO: result: $PS2PDF" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PS2PDF" >&5
 $as_echo "$PS2PDF" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
 
-{ $as_echo "$as_me:$LINENO: checking Whether to build documentation" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking Whether to build documentation" >&5
 $as_echo_n "checking Whether to build documentation... " >&6; }
 
 if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
@@ -21091,10 +15628,10 @@ else
 fi
 
 
-{ $as_echo "$as_me:$LINENO: result: $BUILDDOC" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILDDOC" >&5
 $as_echo "$BUILDDOC" >&6; }
 
-{ $as_echo "$as_me:$LINENO: checking Whether to build pdf documentation" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking Whether to build pdf documentation" >&5
 $as_echo_n "checking Whether to build pdf documentation... " >&6; }
 
 if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
@@ -21112,7 +15649,7 @@ else
 fi
 
 
-{ $as_echo "$as_me:$LINENO: result: $BUILDPDFDOC" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILDPDFDOC" >&5
 $as_echo "$BUILDPDFDOC" >&6; }
 
 MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
@@ -21140,52 +15677,28 @@ case $host_os in
 		DRI2=no
 
 		if test x$XQUARTZ = xauto; then
-			{ $as_echo "$as_me:$LINENO: checking whether to build Xquartz" >&5
+			{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build Xquartz" >&5
 $as_echo_n "checking whether to build Xquartz... " >&6; }
-if test "${xorg_cv_Carbon_framework+set}" = set; then
+if test "${xorg_cv_Carbon_framework+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
 
 		 		save_LDFLAGS=$LDFLAGS
 				LDFLAGS="$LDFLAGS -framework Carbon"
-				cat >conftest.$ac_ext <<_ACEOF
+				cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 char FSFindFolder(); int main() { FSFindFolder(); return 0;}
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   xorg_cv_Carbon_framework=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	xorg_cv_Carbon_framework=no
+  xorg_cv_Carbon_framework=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 			LDFLAGS=$save_LDFLAGS
 fi
-{ $as_echo "$as_me:$LINENO: result: $xorg_cv_Carbon_framework" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xorg_cv_Carbon_framework" >&5
 $as_echo "$xorg_cv_Carbon_framework" >&6; }
 
 			if test "X$xorg_cv_Carbon_framework" = Xyes; then
@@ -21217,7 +15730,7 @@ REQUIRED_LIBS="xfont xau fontenc pixman-1 >= 0.13.2"
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DBUS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DBUS" >&5
 $as_echo_n "checking for DBUS... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -21225,11 +15738,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dbus-1\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dbus-1") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags "dbus-1" 2>/dev/null`
 else
   pkg_failed=yes
@@ -21243,11 +15756,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DBUS_LIBS="$DBUS_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dbus-1\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dbus-1") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs "dbus-1" 2>/dev/null`
 else
   pkg_failed=yes
@@ -21274,7 +15787,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DBUS_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 HAVE_DBUS=no
 elif test $pkg_failed = untried; then
@@ -21282,15 +15795,13 @@ elif test $pkg_failed = untried; then
 else
 	DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS
 	DBUS_LIBS=$pkg_cv_DBUS_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	HAVE_DBUS=yes
 fi
 if test "x$HAVE_DBUS" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DBUS 1
-_ACEOF
+$as_echo "#define HAVE_DBUS 1" >>confdefs.h
 
 fi
  if test "x$HAVE_DBUS" = xyes; then
@@ -21307,15 +15818,11 @@ if test "x$CONFIG_DBUS_API" = xauto; then
 fi
 if test "x$CONFIG_DBUS_API" = xyes; then
 	if ! test "x$HAVE_DBUS" = xyes; then
-		{ { $as_echo "$as_me:$LINENO: error: D-Bus configuration API requested, but D-Bus is not installed." >&5
-$as_echo "$as_me: error: D-Bus configuration API requested, but D-Bus is not installed." >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "D-Bus configuration API requested, but D-Bus is not installed." "$LINENO" 5
 	fi
 
 
-cat >>confdefs.h <<\_ACEOF
-#define CONFIG_DBUS_API 1
-_ACEOF
+$as_echo "#define CONFIG_DBUS_API 1" >>confdefs.h
 
 	CONFIG_NEED_DBUS="yes"
 fi
@@ -21330,7 +15837,7 @@ fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for HAL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for HAL" >&5
 $as_echo_n "checking for HAL... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -21338,11 +15845,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_HAL_CFLAGS="$HAL_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"hal\""; } >&5
   ($PKG_CONFIG --exists --print-errors "hal") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_HAL_CFLAGS=`$PKG_CONFIG --cflags "hal" 2>/dev/null`
 else
   pkg_failed=yes
@@ -21356,11 +15863,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_HAL_LIBS="$HAL_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"hal\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"hal\""; } >&5
   ($PKG_CONFIG --exists --print-errors "hal") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_HAL_LIBS=`$PKG_CONFIG --libs "hal" 2>/dev/null`
 else
   pkg_failed=yes
@@ -21387,7 +15894,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$HAL_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 HAVE_HAL=no
 elif test $pkg_failed = untried; then
@@ -21395,7 +15902,7 @@ elif test $pkg_failed = untried; then
 else
 	HAL_CFLAGS=$pkg_cv_HAL_CFLAGS
 	HAL_LIBS=$pkg_cv_HAL_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	HAVE_HAL=yes
 fi
@@ -21404,15 +15911,11 @@ if test "x$CONFIG_HAL" = xauto; then
 fi
 if test "x$CONFIG_HAL" = xyes; then
 	if ! test "x$HAVE_HAL" = xyes; then
-		{ { $as_echo "$as_me:$LINENO: error: HAL hotplug API requested, but HAL is not installed." >&5
-$as_echo "$as_me: error: HAL hotplug API requested, but HAL is not installed." >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "HAL hotplug API requested, but HAL is not installed." "$LINENO" 5
 	fi
 
 
-cat >>confdefs.h <<\_ACEOF
-#define CONFIG_HAL 1
-_ACEOF
+$as_echo "#define CONFIG_HAL 1" >>confdefs.h
 
         REQUIRED_LIBS="$REQUIRED_LIBS hal"
 	CONFIG_NEED_DBUS="yes"
@@ -21429,9 +15932,7 @@ fi
 if test "x$CONFIG_NEED_DBUS" = xyes; then
 	REQUIRED_LIBS="$REQUIRED_LIBS dbus-1"
 
-cat >>confdefs.h <<\_ACEOF
-#define CONFIG_NEED_DBUS 1
-_ACEOF
+$as_echo "#define CONFIG_NEED_DBUS 1" >>confdefs.h
 
 fi
  if test "x$CONFIG_NEED_DBUS" = xyes; then
@@ -21444,9 +15945,10 @@ fi
 
 CONFIG_LIB='$(top_builddir)/config/libconfig.a'
 
-{ $as_echo "$as_me:$LINENO: checking for glibc..." >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for glibc..." >&5
 $as_echo_n "checking for glibc...... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
 #include <features.h>
 #ifndef __GLIBC__
@@ -21454,146 +15956,32 @@ cat >conftest.$ac_ext <<_ACEOF
 #endif
 
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   glibc=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   glibc=no
 fi
-
 rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $glibc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $glibc" >&5
 $as_echo "$glibc" >&6; }
 
-
 for ac_func in clock_gettime
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  ac_fn_c_check_func "$LINENO" "clock_gettime" "ac_cv_func_clock_gettime"
+if test "x$ac_cv_func_clock_gettime" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+#define HAVE_CLOCK_GETTIME 1
 _ACEOF
  have_clock_gettime=yes
 else
-  { $as_echo "$as_me:$LINENO: checking for clock_gettime in -lrt" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_gettime in -lrt" >&5
 $as_echo_n "checking for clock_gettime in -lrt... " >&6; }
-if test "${ac_cv_lib_rt_clock_gettime+set}" = set; then
+if test "${ac_cv_lib_rt_clock_gettime+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lrt  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -21611,43 +15999,18 @@ return clock_gettime ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_rt_clock_gettime=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_rt_clock_gettime=no
+  ac_cv_lib_rt_clock_gettime=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_rt_clock_gettime" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_clock_gettime" >&5
 $as_echo "$ac_cv_lib_rt_clock_gettime" >&6; }
-if test "x$ac_cv_lib_rt_clock_gettime" = x""yes; then
+if test "x$ac_cv_lib_rt_clock_gettime" = x""yes; then :
   have_clock_gettime=-lrt
 else
   have_clock_gettime=no
@@ -21657,7 +16020,7 @@ fi
 done
 
 
-{ $as_echo "$as_me:$LINENO: checking for a useful monotonic clock ..." >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a useful monotonic clock ..." >&5
 $as_echo_n "checking for a useful monotonic clock ...... " >&6; }
 
 if ! test "x$have_clock_gettime" = xno; then
@@ -21675,10 +16038,11 @@ if ! test "x$have_clock_gettime" = xno; then
         CPPFLAGS="$CPPFLAGS -D_POSIX_C_SOURCE=200112L"
     fi
 
-    if test "$cross_compiling" = yes; then
+    if test "$cross_compiling" = yes; then :
   MONOTONIC_CLOCK="cross compiling"
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
 #include <time.h>
 
@@ -21692,57 +16056,28 @@ int main(int argc, char *argv[]) {
 }
 
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   MONOTONIC_CLOCK=yes
 else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-MONOTONIC_CLOCK=no
+  MONOTONIC_CLOCK=no
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
 
-
     LIBS="$LIBS_SAVE"
     CPPFLAGS="$CPPFLAGS_SAVE"
 else
     MONOTONIC_CLOCK=no
 fi
 
-{ $as_echo "$as_me:$LINENO: result: $MONOTONIC_CLOCK" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MONOTONIC_CLOCK" >&5
 $as_echo "$MONOTONIC_CLOCK" >&6; }
 
 if test "x$MONOTONIC_CLOCK" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define MONOTONIC_CLOCK 1
-_ACEOF
+$as_echo "#define MONOTONIC_CLOCK 1" >>confdefs.h
 
     LIBS="$LIBS $CLOCK_LIBS"
 fi
@@ -21757,14 +16092,10 @@ fi
 
 if test "x$XV" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XV 1
-_ACEOF
+$as_echo "#define XV 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XvExtension 1
-_ACEOF
+$as_echo "#define XvExtension 1" >>confdefs.h
 
 	REQUIRED_MODULES="$REQUIRED_MODULES videoproto"
 else
@@ -21781,9 +16112,7 @@ fi
 
 if test "x$XVMC" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XvMCExtension 1
-_ACEOF
+$as_echo "#define XvMCExtension 1" >>confdefs.h
 
 fi
 
@@ -21797,9 +16126,7 @@ fi
 
 if test "x$XREGISTRY" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XREGISTRY 1
-_ACEOF
+$as_echo "#define XREGISTRY 1" >>confdefs.h
 
 fi
 
@@ -21813,9 +16140,7 @@ fi
 
 if test "x$COMPOSITE" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define COMPOSITE 1
-_ACEOF
+$as_echo "#define COMPOSITE 1" >>confdefs.h
 
 	REQUIRED_MODULES="$REQUIRED_MODULES compositeproto >= 0.4"
 	COMPOSITE_LIB='$(top_builddir)/composite/libcomposite.la'
@@ -21832,14 +16157,10 @@ fi
 
 if test "x$MITSHM" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define MITSHM 1
-_ACEOF
+$as_echo "#define MITSHM 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define HAS_SHM 1
-_ACEOF
+$as_echo "#define HAS_SHM 1" >>confdefs.h
 
 fi
 
@@ -21853,9 +16174,7 @@ fi
 
 if test "x$RECORD" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XRECORD 1
-_ACEOF
+$as_echo "#define XRECORD 1" >>confdefs.h
 
 	REQUIRED_MODULES="$REQUIRED_MODULES recordproto"
 	RECORD_LIB='$(top_builddir)/record/librecord.la'
@@ -21871,9 +16190,7 @@ fi
 
 if test "x$SCREENSAVER" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define SCREENSAVER 1
-_ACEOF
+$as_echo "#define SCREENSAVER 1" >>confdefs.h
 
 	REQUIRED_MODULES="$REQUIRED_MODULES scrnsaverproto >= 1.1"
 fi
@@ -21888,9 +16205,7 @@ fi
 
 if test "x$RES" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define RES 1
-_ACEOF
+$as_echo "#define RES 1" >>confdefs.h
 
 	REQUIRED_MODULES="$REQUIRED_MODULES resourceproto"
 fi
@@ -21898,7 +16213,7 @@ fi
 if test "x$GLX" = xyes; then
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XLIB" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XLIB" >&5
 $as_echo_n "checking for XLIB... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -21906,11 +16221,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XLIB_CFLAGS="$XLIB_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XLIB_CFLAGS=`$PKG_CONFIG --cflags "x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -21924,11 +16239,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XLIB_LIBS="$XLIB_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XLIB_LIBS=`$PKG_CONFIG --libs "x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -21955,18 +16270,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XLIB_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (x11) were not met:
-
-$XLIB_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XLIB_CFLAGS
-and XLIB_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (x11) were not met:
+	as_fn_error "Package requirements (x11) were not met:
 
 $XLIB_PKG_ERRORS
 
@@ -21976,22 +16280,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XLIB_CFLAGS
 and XLIB_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XLIB_CFLAGS
-and XLIB_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -22000,18 +16293,17 @@ and XLIB_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XLIB_CFLAGS=$pkg_cv_XLIB_CFLAGS
 	XLIB_LIBS=$pkg_cv_XLIB_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for GL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GL" >&5
 $as_echo_n "checking for GL... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -22019,11 +16311,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_GL_CFLAGS="$GL_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glproto >= 1.4.9 gl >= 7.1.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glproto >= 1.4.9 gl >= 7.1.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "glproto >= 1.4.9 gl >= 7.1.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_GL_CFLAGS=`$PKG_CONFIG --cflags "glproto >= 1.4.9 gl >= 7.1.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22037,11 +16329,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_GL_LIBS="$GL_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glproto >= 1.4.9 gl >= 7.1.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glproto >= 1.4.9 gl >= 7.1.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "glproto >= 1.4.9 gl >= 7.1.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_GL_LIBS=`$PKG_CONFIG --libs "glproto >= 1.4.9 gl >= 7.1.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22068,7 +16360,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$GL_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (glproto >= 1.4.9 gl >= 7.1.0) were not met:
+	as_fn_error "Package requirements (glproto >= 1.4.9 gl >= 7.1.0) were not met:
 
 $GL_PKG_ERRORS
 
@@ -22078,23 +16370,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables GL_CFLAGS
 and GL_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (glproto >= 1.4.9 gl >= 7.1.0) were not met:
-
-$GL_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables GL_CFLAGS
-and GL_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -22103,30 +16383,17 @@ and GL_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables GL_CFLAGS
-and GL_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	GL_CFLAGS=$pkg_cv_GL_CFLAGS
 	GL_LIBS=$pkg_cv_GL_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 
-cat >>confdefs.h <<\_ACEOF
-#define GLXEXT 1
-_ACEOF
+$as_echo "#define GLXEXT 1" >>confdefs.h
 
 	GLX_LIBS='$(top_builddir)/glx/libglx.la'
 	GLX_SYS_LIBS="$GLX_SYS_LIBS $DLOPEN_LIBS"
@@ -22145,9 +16412,7 @@ fi
 
 if test "x$AIGLX" = xyes -a "x$GLX" = xyes -a "x$DRI" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define AIGLX 1
-_ACEOF
+$as_echo "#define AIGLX 1" >>confdefs.h
 
 else
 	AIGLX=no
@@ -22177,13 +16442,11 @@ fi
 
 if test "x$DRI" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XF86DRI 1
-_ACEOF
+$as_echo "#define XF86DRI 1" >>confdefs.h
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DRIPROTO" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DRIPROTO" >&5
 $as_echo_n "checking for DRIPROTO... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -22191,11 +16454,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DRIPROTO_CFLAGS="$DRIPROTO_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86driproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86driproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86driproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DRIPROTO_CFLAGS=`$PKG_CONFIG --cflags "xf86driproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22209,11 +16472,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DRIPROTO_LIBS="$DRIPROTO_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86driproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86driproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86driproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DRIPROTO_LIBS=`$PKG_CONFIG --libs "xf86driproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22240,7 +16503,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DRIPROTO_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xf86driproto) were not met:
+	as_fn_error "Package requirements (xf86driproto) were not met:
 
 $DRIPROTO_PKG_ERRORS
 
@@ -22250,33 +16513,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables DRIPROTO_CFLAGS
 and DRIPROTO_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (xf86driproto) were not met:
-
-$DRIPROTO_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables DRIPROTO_CFLAGS
-and DRIPROTO_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables DRIPROTO_CFLAGS
-and DRIPROTO_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -22285,18 +16526,17 @@ and DRIPROTO_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	DRIPROTO_CFLAGS=$pkg_cv_DRIPROTO_CFLAGS
 	DRIPROTO_LIBS=$pkg_cv_DRIPROTO_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for GL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GL" >&5
 $as_echo_n "checking for GL... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -22304,11 +16544,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_GL_CFLAGS="$GL_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glproto >= 1.4.1 dri >= 7.1.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glproto >= 1.4.1 dri >= 7.1.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "glproto >= 1.4.1 dri >= 7.1.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_GL_CFLAGS=`$PKG_CONFIG --cflags "glproto >= 1.4.1 dri >= 7.1.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22322,11 +16562,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_GL_LIBS="$GL_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glproto >= 1.4.1 dri >= 7.1.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glproto >= 1.4.1 dri >= 7.1.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "glproto >= 1.4.1 dri >= 7.1.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_GL_LIBS=`$PKG_CONFIG --libs "glproto >= 1.4.1 dri >= 7.1.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22353,18 +16593,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$GL_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (glproto >= 1.4.1 dri >= 7.1.0) were not met:
-
-$GL_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables GL_CFLAGS
-and GL_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (glproto >= 1.4.1 dri >= 7.1.0) were not met:
+	as_fn_error "Package requirements (glproto >= 1.4.1 dri >= 7.1.0) were not met:
 
 $GL_PKG_ERRORS
 
@@ -22374,22 +16603,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables GL_CFLAGS
 and GL_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables GL_CFLAGS
-and GL_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -22398,12 +16616,11 @@ and GL_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	GL_CFLAGS=$pkg_cv_GL_CFLAGS
 	GL_LIBS=$pkg_cv_GL_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
@@ -22413,7 +16630,7 @@ fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DRI2PROTO" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DRI2PROTO" >&5
 $as_echo_n "checking for DRI2PROTO... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -22421,11 +16638,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DRI2PROTO_CFLAGS="$DRI2PROTO_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dri2proto >= 2.1\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dri2proto >= 2.1\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dri2proto >= 2.1") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DRI2PROTO_CFLAGS=`$PKG_CONFIG --cflags "dri2proto >= 2.1" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22439,11 +16656,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DRI2PROTO_LIBS="$DRI2PROTO_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dri2proto >= 2.1\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dri2proto >= 2.1\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dri2proto >= 2.1") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DRI2PROTO_LIBS=`$PKG_CONFIG --libs "dri2proto >= 2.1" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22470,7 +16687,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DRI2PROTO_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 HAVE_DRI2PROTO=no
 elif test $pkg_failed = untried; then
@@ -22478,26 +16695,22 @@ elif test $pkg_failed = untried; then
 else
 	DRI2PROTO_CFLAGS=$pkg_cv_DRI2PROTO_CFLAGS
 	DRI2PROTO_LIBS=$pkg_cv_DRI2PROTO_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	HAVE_DRI2PROTO=yes
 fi
 case "$DRI2,$HAVE_DRI2PROTO" in
 	yes,no)
-		{ { $as_echo "$as_me:$LINENO: error: DRI2 requested, but dri2proto not found." >&5
-$as_echo "$as_me: error: DRI2 requested, but dri2proto not found." >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "DRI2 requested, but dri2proto not found." "$LINENO" 5
 		;;
 	yes,yes | auto,yes)
 
-cat >>confdefs.h <<\_ACEOF
-#define DRI2 1
-_ACEOF
+$as_echo "#define DRI2 1" >>confdefs.h
 
 		DRI2=yes
 		;;
 esac
- if test "x$DRI2" == xyes; then
+ if test "x$DRI2" = xyes; then
   DRI2_TRUE=
   DRI2_FALSE='#'
 else
@@ -22509,7 +16722,7 @@ fi
 if test "x$DRI" = xyes || test "x$DRI2" = xyes; then
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for LIBDRM" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBDRM" >&5
 $as_echo_n "checking for LIBDRM... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -22517,11 +16730,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_LIBDRM_CFLAGS="$LIBDRM_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libdrm >= 2.3.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libdrm >= 2.3.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "libdrm >= 2.3.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_LIBDRM_CFLAGS=`$PKG_CONFIG --cflags "libdrm >= 2.3.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22535,11 +16748,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_LIBDRM_LIBS="$LIBDRM_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libdrm >= 2.3.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libdrm >= 2.3.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "libdrm >= 2.3.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_LIBDRM_LIBS=`$PKG_CONFIG --libs "libdrm >= 2.3.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -22566,18 +16779,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$LIBDRM_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (libdrm >= 2.3.0) were not met:
-
-$LIBDRM_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables LIBDRM_CFLAGS
-and LIBDRM_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (libdrm >= 2.3.0) were not met:
+	as_fn_error "Package requirements (libdrm >= 2.3.0) were not met:
 
 $LIBDRM_PKG_ERRORS
 
@@ -22587,12 +16789,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables LIBDRM_CFLAGS
 and LIBDRM_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -22601,22 +16802,11 @@ and LIBDRM_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables LIBDRM_CFLAGS
-and LIBDRM_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	LIBDRM_CFLAGS=$pkg_cv_LIBDRM_CFLAGS
 	LIBDRM_LIBS=$pkg_cv_LIBDRM_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
@@ -22626,12 +16816,8 @@ fi
 
 if test "x$DRI2" = xyes; then
 	save_CFLAGS=$CFLAGS
-	CFLAGS="$GL_CFLAGS $LIBDRM_CFLAGS -Wall"
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	CFLAGS="$GL_CFLAGS $LIBDRM_CFLAGS"
+	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <GL/gl.h>
 #include <GL/internal/dri_interface.h>
@@ -22639,48 +16825,25 @@ cat >>conftest.$ac_ext <<_ACEOF
 #error DRI2 extension not available.
 #endif
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   HAVE_DRI2EXTENSION=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	HAVE_DRI2EXTENSION=no
+  HAVE_DRI2EXTENSION=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 	CFLAGS=$save_CFLAGS
 	if test "x$HAVE_DRI2EXTENSION" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define DRI2_AIGLX 1
-_ACEOF
+$as_echo "#define DRI2_AIGLX 1" >>confdefs.h
 
 		DRI2_AIGLX=yes
 	else
-		{ $as_echo "$as_me:$LINENO: DRI2 AIGLX disabled, __DRI_DRI2 not defined in dri_interface.h." >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: DRI2 AIGLX disabled, __DRI_DRI2 not defined in dri_interface.h." >&5
 $as_echo "$as_me: DRI2 AIGLX disabled, __DRI_DRI2 not defined in dri_interface.h." >&6;}
 		DRI2_AIGLX=no
 	fi
 fi
- if test "x$DRI2_AIGLX" == xyes; then
+ if test "x$DRI2_AIGLX" = xyes; then
   DRI2_AIGLX_TRUE=
   DRI2_AIGLX_FALSE='#'
 else
@@ -22700,16 +16863,12 @@ fi
 
 if test "x$XINERAMA" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XINERAMA 1
-_ACEOF
+$as_echo "#define XINERAMA 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define PANORAMIX 1
-_ACEOF
+$as_echo "#define PANORAMIX 1" >>confdefs.h
 
-	REQUIRED_MODULES="$REQUIRED_MODULES xineramaproto xinerama"
+	REQUIRED_MODULES="$REQUIRED_MODULES xineramaproto"
 fi
 
  if test "x$XACE" = xyes; then
@@ -22722,9 +16881,7 @@ fi
 
 if test "x$XACE" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XACE 1
-_ACEOF
+$as_echo "#define XACE 1" >>confdefs.h
 
 fi
 
@@ -22738,179 +16895,32 @@ fi
 
 if test "x$XSELINUX" = xyes; then
 	if test "x$XACE" != xyes; then
-		{ { $as_echo "$as_me:$LINENO: error: cannot build SELinux extension without X-ACE" >&5
-$as_echo "$as_me: error: cannot build SELinux extension without X-ACE" >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "cannot build SELinux extension without X-ACE" "$LINENO" 5
 	fi
-
-
-for ac_header in selinux/selinux.h selinux/avc.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+	for ac_header in selinux/selinux.h selinux/avc.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
 
 else
-  { { $as_echo "$as_me:$LINENO: error: SELinux include files not found" >&5
-$as_echo "$as_me: error: SELinux include files not found" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "SELinux include files not found" "$LINENO" 5
 fi
 
 done
 
-
-{ $as_echo "$as_me:$LINENO: checking for avc_init in -lselinux" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for avc_init in -lselinux" >&5
 $as_echo_n "checking for avc_init in -lselinux... " >&6; }
-if test "${ac_cv_lib_selinux_avc_init+set}" = set; then
+if test "${ac_cv_lib_selinux_avc_init+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lselinux  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -22928,43 +16938,18 @@ return avc_init ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_selinux_avc_init=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_selinux_avc_init=no
+  ac_cv_lib_selinux_avc_init=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_selinux_avc_init" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_selinux_avc_init" >&5
 $as_echo "$ac_cv_lib_selinux_avc_init" >&6; }
-if test "x$ac_cv_lib_selinux_avc_init" = x""yes; then
+if test "x$ac_cv_lib_selinux_avc_init" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBSELINUX 1
 _ACEOF
@@ -22972,179 +16957,31 @@ _ACEOF
   LIBS="-lselinux $LIBS"
 
 else
-  { { $as_echo "$as_me:$LINENO: error: SELinux library not found" >&5
-$as_echo "$as_me: error: SELinux library not found" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-
-for ac_header in libaudit.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
+  as_fn_error "SELinux library not found" "$LINENO" 5
 fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
 
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+	for ac_header in libaudit.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "libaudit.h" "ac_cv_header_libaudit_h" "$ac_includes_default"
+if test "x$ac_cv_header_libaudit_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_LIBAUDIT_H 1
 _ACEOF
 
 else
-  { { $as_echo "$as_me:$LINENO: error: SELinux extension requires audit system headers" >&5
-$as_echo "$as_me: error: SELinux extension requires audit system headers" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "SELinux extension requires audit system headers" "$LINENO" 5
 fi
 
 done
 
-
-{ $as_echo "$as_me:$LINENO: checking for audit_open in -laudit" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for audit_open in -laudit" >&5
 $as_echo_n "checking for audit_open in -laudit... " >&6; }
-if test "${ac_cv_lib_audit_audit_open+set}" = set; then
+if test "${ac_cv_lib_audit_audit_open+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-laudit  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -23162,43 +16999,18 @@ return audit_open ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_audit_audit_open=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_audit_audit_open=no
+  ac_cv_lib_audit_audit_open=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_audit_audit_open" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_audit_audit_open" >&5
 $as_echo "$ac_cv_lib_audit_audit_open" >&6; }
-if test "x$ac_cv_lib_audit_audit_open" = x""yes; then
+if test "x$ac_cv_lib_audit_audit_open" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBAUDIT 1
 _ACEOF
@@ -23206,77 +17018,19 @@ _ACEOF
   LIBS="-laudit $LIBS"
 
 else
-  { { $as_echo "$as_me:$LINENO: error: SELinux extension requires audit system library" >&5
-$as_echo "$as_me: error: SELinux extension requires audit system library" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "SELinux extension requires audit system library" "$LINENO" 5
 fi
 
-        { $as_echo "$as_me:$LINENO: checking whether avc_netlink_acquire_fd is declared" >&5
-$as_echo_n "checking whether avc_netlink_acquire_fd is declared... " >&6; }
-if test "${ac_cv_have_decl_avc_netlink_acquire_fd+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <selinux/avc.h>
-
-int
-main ()
-{
-#ifndef avc_netlink_acquire_fd
-  (void) avc_netlink_acquire_fd;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_have_decl_avc_netlink_acquire_fd=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_have_decl_avc_netlink_acquire_fd=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl_avc_netlink_acquire_fd" >&5
-$as_echo "$ac_cv_have_decl_avc_netlink_acquire_fd" >&6; }
-if test "x$ac_cv_have_decl_avc_netlink_acquire_fd" = x""yes; then
+        ac_fn_c_check_decl "$LINENO" "avc_netlink_acquire_fd" "ac_cv_have_decl_avc_netlink_acquire_fd" "#include <selinux/avc.h>
+"
+if test "x$ac_cv_have_decl_avc_netlink_acquire_fd" = x""yes; then :
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_AVC_NETLINK_ACQUIRE_FD 1
-_ACEOF
+$as_echo "#define HAVE_AVC_NETLINK_ACQUIRE_FD 1" >>confdefs.h
 
 fi
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XSELINUX 1
-_ACEOF
+$as_echo "#define XSELINUX 1" >>confdefs.h
 
 	SELINUX_LIB="-lselinux -laudit"
 fi
@@ -23291,14 +17045,10 @@ fi
 
 if test "x$XCSECURITY" = xyes; then
 	if test "x$XACE" != xyes; then
-		{ { $as_echo "$as_me:$LINENO: error: cannot build Security extension without X-ACE" >&5
-$as_echo "$as_me: error: cannot build Security extension without X-ACE" >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "cannot build Security extension without X-ACE" "$LINENO" 5
 	fi
 
-cat >>confdefs.h <<\_ACEOF
-#define XCSECURITY 1
-_ACEOF
+$as_echo "#define XCSECURITY 1" >>confdefs.h
 
 fi
 
@@ -23312,9 +17062,7 @@ fi
 
 if test "x$MULTIBUFFER" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define MULTIBUFFER 1
-_ACEOF
+$as_echo "#define MULTIBUFFER 1" >>confdefs.h
 
 	# Requires xextproto which is always required
 fi
@@ -23329,9 +17077,7 @@ fi
 
 if test "x$DBE" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define DBE 1
-_ACEOF
+$as_echo "#define DBE 1" >>confdefs.h
 
 	DBE_LIB='$(top_builddir)/dbe/libdbe.la'
 fi
@@ -23346,9 +17092,7 @@ fi
 
 if test "x$XF86BIGFONT" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XF86BIGFONT 1
-_ACEOF
+$as_echo "#define XF86BIGFONT 1" >>confdefs.h
 
 fi
 
@@ -23362,17 +17106,13 @@ fi
 
 if test "x$DPMSExtension" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define DPMSExtension 1
-_ACEOF
+$as_echo "#define DPMSExtension 1" >>confdefs.h
 
 fi
 
 if test "x$XCALIBRATE" = xyes && test "$KDRIVE" = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XCALIBRATE 1
-_ACEOF
+$as_echo "#define XCALIBRATE 1" >>confdefs.h
 
    REQUIRED_MODULES="$REQUIRED_MODULES xcalibrateproto"
 else
@@ -23388,33 +17128,25 @@ fi
 
 
 
-cat >>confdefs.h <<\_ACEOF
-#define RENDER 1
-_ACEOF
+$as_echo "#define RENDER 1" >>confdefs.h
 
 RENDER_LIB='$(top_builddir)/render/librender.la'
 RENDER_INC='-I$(top_srcdir)/render'
 
 
-cat >>confdefs.h <<\_ACEOF
-#define RANDR 1
-_ACEOF
+$as_echo "#define RANDR 1" >>confdefs.h
 
 RANDR_LIB='$(top_builddir)/randr/librandr.la'
 RANDR_INC='-I$(top_srcdir)/randr'
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XFIXES 1
-_ACEOF
+$as_echo "#define XFIXES 1" >>confdefs.h
 
 FIXES_LIB='$(top_builddir)/xfixes/libxfixes.la'
 FIXES_INC='-I$(top_srcdir)/xfixes'
 
 
-cat >>confdefs.h <<\_ACEOF
-#define DAMAGE 1
-_ACEOF
+$as_echo "#define DAMAGE 1" >>confdefs.h
 
 DAMAGE_LIB='$(top_builddir)/damageext/libdamageext.la'
 DAMAGE_INC='-I$(top_srcdir)/damageext'
@@ -23435,327 +17167,59 @@ fi
 
 
 
-cat >>confdefs.h <<\_ACEOF
-#define SHAPE 1
-_ACEOF
+$as_echo "#define SHAPE 1" >>confdefs.h
 
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XKB 1
-_ACEOF
+$as_echo "#define XKB 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XKB_IN_SERVER 1
-_ACEOF
+$as_echo "#define XKB_IN_SERVER 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XKB_DFLT_DISABLED 0
-_ACEOF
+$as_echo "#define XKB_DFLT_DISABLED 0" >>confdefs.h
 
 REQUIRED_MODULES="$REQUIRED_MODULES xkbfile"
 XKB_LIB='$(top_builddir)/xkb/libxkb.la'
 XKB_STUB_LIB='$(top_builddir)/xkb/libxkbstubs.la'
 
-{ $as_echo "$as_me:$LINENO: checking for strcasecmp" >&5
-$as_echo_n "checking for strcasecmp... " >&6; }
-if test "${ac_cv_func_strcasecmp+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define strcasecmp to an innocuous variant, in case <limits.h> declares strcasecmp.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define strcasecmp innocuous_strcasecmp
+ac_fn_c_check_func "$LINENO" "strcasecmp" "ac_cv_func_strcasecmp"
+if test "x$ac_cv_func_strcasecmp" = x""yes; then :
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char strcasecmp (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef strcasecmp
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strcasecmp ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_strcasecmp || defined __stub___strcasecmp
-choke me
-#endif
-
-int
-main ()
-{
-return strcasecmp ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_strcasecmp=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_strcasecmp=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_strcasecmp" >&5
-$as_echo "$ac_cv_func_strcasecmp" >&6; }
-if test "x$ac_cv_func_strcasecmp" = x""yes; then
-  :
 else
 
-cat >>confdefs.h <<\_ACEOF
-#define NEED_STRCASECMP 1
-_ACEOF
+$as_echo "#define NEED_STRCASECMP 1" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for strncasecmp" >&5
-$as_echo_n "checking for strncasecmp... " >&6; }
-if test "${ac_cv_func_strncasecmp+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define strncasecmp to an innocuous variant, in case <limits.h> declares strncasecmp.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define strncasecmp innocuous_strncasecmp
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char strncasecmp (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef strncasecmp
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strncasecmp ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_strncasecmp || defined __stub___strncasecmp
-choke me
-#endif
-
-int
-main ()
-{
-return strncasecmp ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_strncasecmp=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_strncasecmp=no
-fi
+ac_fn_c_check_func "$LINENO" "strncasecmp" "ac_cv_func_strncasecmp"
+if test "x$ac_cv_func_strncasecmp" = x""yes; then :
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_strncasecmp" >&5
-$as_echo "$ac_cv_func_strncasecmp" >&6; }
-if test "x$ac_cv_func_strncasecmp" = x""yes; then
-  :
 else
 
-cat >>confdefs.h <<\_ACEOF
-#define NEED_STRNCASECMP 1
-_ACEOF
+$as_echo "#define NEED_STRNCASECMP 1" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for strcasestr" >&5
-$as_echo_n "checking for strcasestr... " >&6; }
-if test "${ac_cv_func_strcasestr+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define strcasestr to an innocuous variant, in case <limits.h> declares strcasestr.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define strcasestr innocuous_strcasestr
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char strcasestr (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef strcasestr
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strcasestr ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_strcasestr || defined __stub___strcasestr
-choke me
-#endif
-
-int
-main ()
-{
-return strcasestr ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_strcasestr=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ac_fn_c_check_func "$LINENO" "strcasestr" "ac_cv_func_strcasestr"
+if test "x$ac_cv_func_strcasestr" = x""yes; then :
 
-	ac_cv_func_strcasestr=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_strcasestr" >&5
-$as_echo "$ac_cv_func_strcasestr" >&6; }
-if test "x$ac_cv_func_strcasestr" = x""yes; then
-  :
 else
 
-cat >>confdefs.h <<\_ACEOF
-#define NEED_STRCASESTR 1
-_ACEOF
+$as_echo "#define NEED_STRCASESTR 1" >>confdefs.h
 
 fi
 
 
 if test "x$NULL_ROOT_CURSOR" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define NULL_ROOT_CURSOR 1
-_ACEOF
+$as_echo "#define NULL_ROOT_CURSOR 1" >>confdefs.h
 
 fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XDMCP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XDMCP" >&5
 $as_echo_n "checking for XDMCP... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -23763,11 +17227,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XDMCP_CFLAGS="$XDMCP_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xdmcp\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xdmcp\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xdmcp") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XDMCP_CFLAGS=`$PKG_CONFIG --cflags "xdmcp" 2>/dev/null`
 else
   pkg_failed=yes
@@ -23781,11 +17245,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XDMCP_LIBS="$XDMCP_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xdmcp\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xdmcp\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xdmcp") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XDMCP_LIBS=`$PKG_CONFIG --libs "xdmcp" 2>/dev/null`
 else
   pkg_failed=yes
@@ -23812,7 +17276,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XDMCP_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 have_libxdmcp="no"
 elif test $pkg_failed = untried; then
@@ -23820,23 +17284,19 @@ elif test $pkg_failed = untried; then
 else
 	XDMCP_CFLAGS=$pkg_cv_XDMCP_CFLAGS
 	XDMCP_LIBS=$pkg_cv_XDMCP_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	have_libxdmcp="yes"
 fi
 if test "x$have_libxdmcp" = xyes; then
-	{ $as_echo "$as_me:$LINENO: checking for XdmcpWrap in -lXdmcp" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XdmcpWrap in -lXdmcp" >&5
 $as_echo_n "checking for XdmcpWrap in -lXdmcp... " >&6; }
-if test "${ac_cv_lib_Xdmcp_XdmcpWrap+set}" = set; then
+if test "${ac_cv_lib_Xdmcp_XdmcpWrap+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lXdmcp $XDMCP_LIBS $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -23854,43 +17314,18 @@ return XdmcpWrap ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_Xdmcp_XdmcpWrap=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_Xdmcp_XdmcpWrap=no
+  ac_cv_lib_Xdmcp_XdmcpWrap=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_Xdmcp_XdmcpWrap" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xdmcp_XdmcpWrap" >&5
 $as_echo "$ac_cv_lib_Xdmcp_XdmcpWrap" >&6; }
-if test "x$ac_cv_lib_Xdmcp_XdmcpWrap" = x""yes; then
+if test "x$ac_cv_lib_Xdmcp_XdmcpWrap" = x""yes; then :
   have_xdmcpwrap="yes"
 else
   have_xdmcpwrap="no"
@@ -23922,9 +17357,7 @@ fi
 
 if test "x$XDMCP" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XDMCP 1
-_ACEOF
+$as_echo "#define XDMCP 1" >>confdefs.h
 
 	REQUIRED_LIBS="$REQUIRED_LIBS xdmcp"
 	XDMCP_MODULES="xdmcp"
@@ -23940,9 +17373,7 @@ fi
 
 if test "x$XDMAUTH" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HASXDMAUTH 1
-_ACEOF
+$as_echo "#define HASXDMAUTH 1" >>confdefs.h
 
 	if ! test "x$XDMCP" = xyes; then
 		REQUIRED_LIBS="$REQUIRED_LIBS xdmcp"
@@ -24087,16 +17518,12 @@ _ACEOF
 
 
 
-cat >>confdefs.h <<\_ACEOF
-#define NO_LIBCWRAPPER 1
-_ACEOF
+$as_echo "#define NO_LIBCWRAPPER 1" >>confdefs.h
 
 
 if test "x$DEBUGGING" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define DEBUG 1
-_ACEOF
+$as_echo "#define DEBUG 1" >>confdefs.h
 
 fi
  if test "x$DEBUGGING" = xyes; then
@@ -24109,24 +17536,16 @@ fi
 
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XTEST 1
-_ACEOF
+$as_echo "#define XTEST 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XSYNC 1
-_ACEOF
+$as_echo "#define XSYNC 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XCMISC 1
-_ACEOF
+$as_echo "#define XCMISC 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define BIGREQS 1
-_ACEOF
+$as_echo "#define BIGREQS 1" >>confdefs.h
 
 
 if test "x$WDTRACE" != "xno" ; then
@@ -24150,18 +17569,14 @@ CORE_INCS='-I$(top_srcdir)/include -I$(top_builddir)/include'
 # Some systems have matching functionality in the smaller/simpler libmd
 # Builders who want to force a choice can set SHA1_LIB and SHA1_CFLAGS
 if test "x$SHA1_LIB" = "x" ; then
-  { $as_echo "$as_me:$LINENO: checking for SHA1Init in -lmd" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SHA1Init in -lmd" >&5
 $as_echo_n "checking for SHA1Init in -lmd... " >&6; }
-if test "${ac_cv_lib_md_SHA1Init+set}" = set; then
+if test "${ac_cv_lib_md_SHA1Init+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lmd  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -24179,48 +17594,21 @@ return SHA1Init ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_md_SHA1Init=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_md_SHA1Init=no
+  ac_cv_lib_md_SHA1Init=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_md_SHA1Init" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_md_SHA1Init" >&5
 $as_echo "$ac_cv_lib_md_SHA1Init" >&6; }
-if test "x$ac_cv_lib_md_SHA1Init" = x""yes; then
+if test "x$ac_cv_lib_md_SHA1Init" = x""yes; then :
   SHA1_LIB="-lmd"
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SHA1_IN_LIBMD 1
-_ACEOF
+$as_echo "#define HAVE_SHA1_IN_LIBMD 1" >>confdefs.h
 
 fi
 
@@ -24228,11 +17616,11 @@ fi
 
 if test "x$SHA1_LIB" = "x" ; then
   if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"OPENSSL\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"OPENSSL\""; } >&5
   ($PKG_CONFIG --exists --print-errors "OPENSSL") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   openssl
 else
   HAVE_OPENSSL_PKC=yes
@@ -24240,18 +17628,14 @@ fi
   if test "x$HAVE_OPENSSL_PKC" = xyes; then
     REQUIRED_LIBS="$REQUIRED_LIBS openssl"
   else
-    { $as_echo "$as_me:$LINENO: checking for SHA1_Init in -lcrypto" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SHA1_Init in -lcrypto" >&5
 $as_echo_n "checking for SHA1_Init in -lcrypto... " >&6; }
-if test "${ac_cv_lib_crypto_SHA1_Init+set}" = set; then
+if test "${ac_cv_lib_crypto_SHA1_Init+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lcrypto  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -24269,48 +17653,21 @@ return SHA1_Init ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_crypto_SHA1_Init=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_crypto_SHA1_Init=no
+  ac_cv_lib_crypto_SHA1_Init=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_crypto_SHA1_Init" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypto_SHA1_Init" >&5
 $as_echo "$ac_cv_lib_crypto_SHA1_Init" >&6; }
-if test "x$ac_cv_lib_crypto_SHA1_Init" = x""yes; then
+if test "x$ac_cv_lib_crypto_SHA1_Init" = x""yes; then :
   SHA1_LIB="-lcrypto"
 else
-  { { $as_echo "$as_me:$LINENO: error: OpenSSL must be installed in order to build the X server." >&5
-$as_echo "$as_me: error: OpenSSL must be installed in order to build the X server." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "OpenSSL must be installed in order to build the X server." "$LINENO" 5
 fi
 
   fi
@@ -24318,7 +17675,7 @@ fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XSERVERCFLAGS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XSERVERCFLAGS" >&5
 $as_echo_n "checking for XSERVERCFLAGS... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -24326,11 +17683,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XSERVERCFLAGS_CFLAGS="$XSERVERCFLAGS_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$REQUIRED_MODULES \$REQUIRED_LIBS\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$REQUIRED_MODULES \$REQUIRED_LIBS\""; } >&5
   ($PKG_CONFIG --exists --print-errors "$REQUIRED_MODULES $REQUIRED_LIBS") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XSERVERCFLAGS_CFLAGS=`$PKG_CONFIG --cflags "$REQUIRED_MODULES $REQUIRED_LIBS" 2>/dev/null`
 else
   pkg_failed=yes
@@ -24344,11 +17701,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XSERVERCFLAGS_LIBS="$XSERVERCFLAGS_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$REQUIRED_MODULES \$REQUIRED_LIBS\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$REQUIRED_MODULES \$REQUIRED_LIBS\""; } >&5
   ($PKG_CONFIG --exists --print-errors "$REQUIRED_MODULES $REQUIRED_LIBS") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XSERVERCFLAGS_LIBS=`$PKG_CONFIG --libs "$REQUIRED_MODULES $REQUIRED_LIBS" 2>/dev/null`
 else
   pkg_failed=yes
@@ -24375,7 +17732,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XSERVERCFLAGS_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements ($REQUIRED_MODULES $REQUIRED_LIBS) were not met:
+	as_fn_error "Package requirements ($REQUIRED_MODULES $REQUIRED_LIBS) were not met:
 
 $XSERVERCFLAGS_PKG_ERRORS
 
@@ -24385,23 +17742,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XSERVERCFLAGS_CFLAGS
 and XSERVERCFLAGS_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements ($REQUIRED_MODULES $REQUIRED_LIBS) were not met:
-
-$XSERVERCFLAGS_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XSERVERCFLAGS_CFLAGS
-and XSERVERCFLAGS_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -24410,28 +17755,17 @@ and XSERVERCFLAGS_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XSERVERCFLAGS_CFLAGS
-and XSERVERCFLAGS_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XSERVERCFLAGS_CFLAGS=$pkg_cv_XSERVERCFLAGS_CFLAGS
 	XSERVERCFLAGS_LIBS=$pkg_cv_XSERVERCFLAGS_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XSERVERLIBS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XSERVERLIBS" >&5
 $as_echo_n "checking for XSERVERLIBS... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -24439,11 +17773,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XSERVERLIBS_CFLAGS="$XSERVERLIBS_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$REQUIRED_LIBS\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$REQUIRED_LIBS\""; } >&5
   ($PKG_CONFIG --exists --print-errors "$REQUIRED_LIBS") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XSERVERLIBS_CFLAGS=`$PKG_CONFIG --cflags "$REQUIRED_LIBS" 2>/dev/null`
 else
   pkg_failed=yes
@@ -24457,11 +17791,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XSERVERLIBS_LIBS="$XSERVERLIBS_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$REQUIRED_LIBS\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$REQUIRED_LIBS\""; } >&5
   ($PKG_CONFIG --exists --print-errors "$REQUIRED_LIBS") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XSERVERLIBS_LIBS=`$PKG_CONFIG --libs "$REQUIRED_LIBS" 2>/dev/null`
 else
   pkg_failed=yes
@@ -24488,18 +17822,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XSERVERLIBS_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements ($REQUIRED_LIBS) were not met:
-
-$XSERVERLIBS_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XSERVERLIBS_CFLAGS
-and XSERVERLIBS_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements ($REQUIRED_LIBS) were not met:
+	as_fn_error "Package requirements ($REQUIRED_LIBS) were not met:
 
 $XSERVERLIBS_PKG_ERRORS
 
@@ -24509,12 +17832,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XSERVERLIBS_CFLAGS
 and XSERVERLIBS_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -24523,22 +17845,11 @@ and XSERVERLIBS_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XSERVERLIBS_CFLAGS
-and XSERVERLIBS_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XSERVERLIBS_CFLAGS=$pkg_cv_XSERVERLIBS_CFLAGS
 	XSERVERLIBS_LIBS=$pkg_cv_XSERVERLIBS_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
@@ -24590,13 +17901,9 @@ case $host_os in
 esac
 
 
-{ $as_echo "$as_me:$LINENO: checking if SVR4 needs to be defined" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if SVR4 needs to be defined" >&5
 $as_echo_n "checking if SVR4 needs to be defined... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #if defined(SVR4) || defined(__svr4__) || defined(__SVR4)
@@ -24605,17 +17912,15 @@ cat >>conftest.$ac_ext <<_ACEOF
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "I_AM_SVR4" >/dev/null 2>&1; then
+  $EGREP "I_AM_SVR4" >/dev/null 2>&1; then :
 
 
-cat >>confdefs.h <<\_ACEOF
-#define SVR4 1
-_ACEOF
+$as_echo "#define SVR4 1" >>confdefs.h
 
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 rm -f conftest*
@@ -24625,9 +17930,9 @@ XSERVER_CFLAGS="$XSERVER_CFLAGS $CORE_INCS $XEXT_INC $COMPOSITE_INC $DAMAGE_INC
 
 
 
-{ $as_echo "$as_me:$LINENO: checking whether to build Xvfb DDX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build Xvfb DDX" >&5
 $as_echo_n "checking whether to build Xvfb DDX... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $XVFB" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $XVFB" >&5
 $as_echo "$XVFB" >&6; }
  if test "x$XVFB" = xyes; then
   XVFB_TRUE=
@@ -24649,7 +17954,7 @@ fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XNESTMODULES" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XNESTMODULES" >&5
 $as_echo_n "checking for XNESTMODULES... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -24657,11 +17962,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XNESTMODULES_CFLAGS="$XNESTMODULES_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xfont xext x11 xau \$XDMCP_MODULES\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xfont xext x11 xau \$XDMCP_MODULES\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xfont xext x11 xau $XDMCP_MODULES") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XNESTMODULES_CFLAGS=`$PKG_CONFIG --cflags "xfont xext x11 xau $XDMCP_MODULES" 2>/dev/null`
 else
   pkg_failed=yes
@@ -24675,11 +17980,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XNESTMODULES_LIBS="$XNESTMODULES_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xfont xext x11 xau \$XDMCP_MODULES\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xfont xext x11 xau \$XDMCP_MODULES\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xfont xext x11 xau $XDMCP_MODULES") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XNESTMODULES_LIBS=`$PKG_CONFIG --libs "xfont xext x11 xau $XDMCP_MODULES" 2>/dev/null`
 else
   pkg_failed=yes
@@ -24706,7 +18011,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XNESTMODULES_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 have_xnest=no
 elif test $pkg_failed = untried; then
@@ -24714,16 +18019,16 @@ elif test $pkg_failed = untried; then
 else
 	XNESTMODULES_CFLAGS=$pkg_cv_XNESTMODULES_CFLAGS
 	XNESTMODULES_LIBS=$pkg_cv_XNESTMODULES_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	have_xnest=yes
 fi
-{ $as_echo "$as_me:$LINENO: checking whether to build Xnest DDX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build Xnest DDX" >&5
 $as_echo_n "checking whether to build Xnest DDX... " >&6; }
 if test "x$XNEST" = xauto; then
 	XNEST="$have_xnest"
 fi
-{ $as_echo "$as_me:$LINENO: result: $XNEST" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $XNEST" >&5
 $as_echo "$XNEST" >&6; }
  if test "x$XNEST" = xyes; then
   XNEST_TRUE=
@@ -24743,7 +18048,7 @@ fi
 
 
 
-{ $as_echo "$as_me:$LINENO: checking whether to build Xorg DDX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build Xorg DDX" >&5
 $as_echo_n "checking whether to build Xorg DDX... " >&6; }
 if test "x$XORG" = xauto; then
 	XORG="yes"
@@ -24752,7 +18057,7 @@ if test "x$XORG" = xauto; then
 		darwin*) XORG="no" ;;
 	esac
 fi
-{ $as_echo "$as_me:$LINENO: result: $XORG" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $XORG" >&5
 $as_echo "$XORG" >&6; }
 
 xorg_bus_linuxpci=no
@@ -24764,11 +18069,11 @@ if test "x$XORG" = xyes; then
 	XORG_OSINCS='-I$(top_srcdir)/hw/xfree86/os-support -I$(top_srcdir)/hw/xfree86/os-support/bus -I$(top_srcdir)/os'
 	XORG_INCS="$XORG_DDXINCS $XORG_OSINCS"
 	XORG_CFLAGS="$XORGSERVER_CFLAGS -DHAVE_XORG_CONFIG_H"
-	XORG_LIBS="$COMPOSITE_LIB $FIXES_LIB $XEXTXORG_LIB $GLX_LIBS $RANDR_LIB $RENDER_LIB $DAMAGE_LIB $MIEXT_DAMAGE_LIB $MIEXT_SHADOW_LIB $XI_LIB $XKB_LIB $SELINUX_LIB"
+	XORG_LIBS="$COMPOSITE_LIB $FIXES_LIB $XEXTXORG_LIB $GLX_LIBS $RANDR_LIB $RENDER_LIB $DAMAGE_LIB $MIEXT_DAMAGE_LIB $MIEXT_SHADOW_LIB $XI_LIB $XKB_LIB"
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for PCIACCESS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PCIACCESS" >&5
 $as_echo_n "checking for PCIACCESS... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -24776,11 +18081,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_PCIACCESS_CFLAGS="$PCIACCESS_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pciaccess >= 0.8.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pciaccess >= 0.8.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "pciaccess >= 0.8.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_PCIACCESS_CFLAGS=`$PKG_CONFIG --cflags "pciaccess >= 0.8.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -24794,11 +18099,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_PCIACCESS_LIBS="$PCIACCESS_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pciaccess >= 0.8.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pciaccess >= 0.8.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "pciaccess >= 0.8.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_PCIACCESS_LIBS=`$PKG_CONFIG --libs "pciaccess >= 0.8.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -24825,18 +18130,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$PCIACCESS_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (pciaccess >= 0.8.0) were not met:
-
-$PCIACCESS_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables PCIACCESS_CFLAGS
-and PCIACCESS_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (pciaccess >= 0.8.0) were not met:
+	as_fn_error "Package requirements (pciaccess >= 0.8.0) were not met:
 
 $PCIACCESS_PKG_ERRORS
 
@@ -24846,12 +18140,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables PCIACCESS_CFLAGS
 and PCIACCESS_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -24860,22 +18153,11 @@ and PCIACCESS_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables PCIACCESS_CFLAGS
-and PCIACCESS_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	PCIACCESS_CFLAGS=$pkg_cv_PCIACCESS_CFLAGS
 	PCIACCESS_LIBS=$pkg_cv_PCIACCESS_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
@@ -24883,203 +18165,23 @@ fi
 	SAVE_CFLAGS=$CFLAGS
 	CFLAGS=$PCIACCESS_CFLAGS
 	LIBS=$PCIACCESS_LIBS
-
-for ac_func in pci_system_init_dev_mem
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+	for ac_func in pci_system_init_dev_mem
+do :
+  ac_fn_c_check_func "$LINENO" "pci_system_init_dev_mem" "ac_cv_func_pci_system_init_dev_mem"
+if test "x$ac_cv_func_pci_system_init_dev_mem" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+#define HAVE_PCI_SYSTEM_INIT_DEV_MEM 1
 _ACEOF
 
 fi
 done
 
-
-for ac_func in pci_device_enable
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+	for ac_func in pci_device_enable
+do :
+  ac_fn_c_check_func "$LINENO" "pci_device_enable" "ac_cv_func_pci_device_enable"
+if test "x$ac_cv_func_pci_device_enable" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+#define HAVE_PCI_DEVICE_ENABLE 1
 _ACEOF
 
 fi
@@ -25087,7 +18189,7 @@ done
 
 	LIBS=$SAVE_LIBS
 	CFLAGS=$SAVE_CFLAGS
-	XORG_SYS_LIBS="$XORG_SYS_LIBS $PCIACCESS_LIBS $DLOPEN_LIBS $GLX_SYS_LIBS"
+	XORG_SYS_LIBS="$XORG_SYS_LIBS $PCIACCESS_LIBS $DLOPEN_LIBS $GLX_SYS_LIBS $SELINUX_LIB"
 	XORG_CFLAGS="$XORG_CFLAGS $PCIACCESS_CFLAGS"
 
 	case $host_os in
@@ -25139,151 +18241,12 @@ done
 		# Use the same stubs as BSD for old functions, since we now
 		# use libpciaccess for PCI
 		xorg_bus_bsdpci="yes"
-
-for ac_header in sys/kd.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+		for ac_header in sys/kd.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "sys/kd.h" "ac_cv_header_sys_kd_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_kd_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_SYS_KD_H 1
 _ACEOF
 
 fi
@@ -25293,77 +18256,23 @@ done
 		# This really should be tests for specific features, but the #ifdef's
 		# were done as a simple version check in XFree86 4.x and haven't been
 		# fixed yet
-		{ $as_echo "$as_me:$LINENO: checking Solaris version" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking Solaris version" >&5
 $as_echo_n "checking Solaris version... " >&6; }
 	        OS_MINOR=`echo ${host_os}|sed -e 's/^.*solaris2\.//' -e s'/\..*$//'`
 		if test "${OS_MINOR}" -ge 7 ; then
-	        	{ $as_echo "$as_me:$LINENO: result: Solaris ${OS_MINOR}" >&5
+	        	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: Solaris ${OS_MINOR}" >&5
 $as_echo "Solaris ${OS_MINOR}" >&6; }
 		else
-			{ $as_echo "$as_me:$LINENO: result: Solaris \`echo ${host_os}|sed -e 's/^.*solaris//\`" >&5
+			{ $as_echo "$as_me:${as_lineno-$LINENO}: result: Solaris \`echo ${host_os}|sed -e 's/^.*solaris//\`" >&5
 $as_echo "Solaris \`echo ${host_os}|sed -e 's/^.*solaris//\`" >&6; }
 		fi
 		if test "${OS_MINOR}" -ge 8 ; then
 
-cat >>confdefs.h <<\_ACEOF
-#define __SOL8__ 1
-_ACEOF
+$as_echo "#define __SOL8__ 1" >>confdefs.h
 
 		fi
-		{ $as_echo "$as_me:$LINENO: checking whether __SUNPRO_C is declared" >&5
-$as_echo_n "checking whether __SUNPRO_C is declared... " >&6; }
-if test "${ac_cv_have_decl___SUNPRO_C+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-#ifndef __SUNPRO_C
-  (void) __SUNPRO_C;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_have_decl___SUNPRO_C=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_have_decl___SUNPRO_C=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___SUNPRO_C" >&5
-$as_echo "$ac_cv_have_decl___SUNPRO_C" >&6; }
-if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then
+		ac_fn_c_check_decl "$LINENO" "__SUNPRO_C" "ac_cv_have_decl___SUNPRO_C" "$ac_includes_default"
+if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then :
   SUNCC="yes"
 else
   SUNCC="no"
@@ -25372,60 +18281,8 @@ fi
 		if test "x$SUNCC" = "xyes"; then
 			solaris_asm_inline="yes"
 		fi
-		{ $as_echo "$as_me:$LINENO: checking whether _LP64 is declared" >&5
-$as_echo_n "checking whether _LP64 is declared... " >&6; }
-if test "${ac_cv_have_decl__LP64+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-#ifndef _LP64
-  (void) _LP64;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_have_decl__LP64=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_have_decl__LP64=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl__LP64" >&5
-$as_echo "$ac_cv_have_decl__LP64" >&6; }
-if test "x$ac_cv_have_decl__LP64" = x""yes; then
+		ac_fn_c_check_decl "$LINENO" "_LP64" "ac_cv_have_decl__LP64" "$ac_includes_default"
+if test "x$ac_cv_have_decl__LP64" = x""yes; then :
   SOLARIS_64="yes"
 else
   SOLARIS_64="no"
@@ -25449,15 +18306,10 @@ fi
 			fi
 			;;
 		  *)
-			{ { $as_echo "$as_me:$LINENO: error: Unsupported Solaris platform. Only SPARC & x86 \
-			are supported on Solaris in this release.   If you are \
-			interested in porting Xorg to your platform, please email \
-			xorg@lists.freedesktop.org." >&5
-$as_echo "$as_me: error: Unsupported Solaris platform. Only SPARC & x86 \
+			as_fn_error "Unsupported Solaris platform. Only SPARC & x86 \
 			are supported on Solaris in this release.   If you are \
 			interested in porting Xorg to your platform, please email \
-			xorg@lists.freedesktop.org." >&2;}
-   { (exit 1); exit 1; }; } ;;
+			xorg@lists.freedesktop.org." "$LINENO" 5 ;;
 		esac
 
 		if test x$solaris_asm_inline = xyes ; then
@@ -25473,13 +18325,9 @@ $as_echo "$as_me: error: Unsupported Solaris platform. Only SPARC & x86 \
 	  *)
 	  	XORG_OS="unknown"
 		XORG_OS_SUBDIR="unknown"
-		{ { $as_echo "$as_me:$LINENO: error: Your OS is unknown. Xorg currently only supports Linux, \
+		as_fn_error "Your OS is unknown. Xorg currently only supports Linux, \
 		Free/Open/NetBSD, Solaris, and OS X. If you are interested in porting \
-	        Xorg to your platform, please email xorg@lists.freedesktop.org." >&5
-$as_echo "$as_me: error: Your OS is unknown. Xorg currently only supports Linux, \
-		Free/Open/NetBSD, Solaris, and OS X. If you are interested in porting \
-	        Xorg to your platform, please email xorg@lists.freedesktop.org." >&2;}
-   { (exit 1); exit 1; }; }
+	        Xorg to your platform, please email xorg@lists.freedesktop.org." "$LINENO" 5
 		;;
 	esac
 
@@ -25495,7 +18343,7 @@ $as_echo "$as_me: error: Your OS is unknown. Xorg currently only supports Linux,
 	if test "x$DGA" = xauto; then
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DGA" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DGA" >&5
 $as_echo_n "checking for DGA... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -25503,11 +18351,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DGA_CFLAGS="$DGA_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86dgaproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86dgaproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86dgaproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DGA_CFLAGS=`$PKG_CONFIG --cflags "xf86dgaproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25521,11 +18369,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DGA_LIBS="$DGA_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86dgaproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86dgaproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86dgaproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DGA_LIBS=`$PKG_CONFIG --libs "xf86dgaproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25552,7 +18400,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DGA_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 DGA=no
 elif test $pkg_failed = untried; then
@@ -25560,7 +18408,7 @@ elif test $pkg_failed = untried; then
 else
 	DGA_CFLAGS=$pkg_cv_DGA_CFLAGS
 	DGA_LIBS=$pkg_cv_DGA_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	DGA=yes
 fi
@@ -25569,7 +18417,7 @@ fi
 		XORG_MODULES="$XORG_MODULES xf86dgaproto"
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DGA" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DGA" >&5
 $as_echo_n "checking for DGA... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -25577,11 +18425,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DGA_CFLAGS="$DGA_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86dgaproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86dgaproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86dgaproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DGA_CFLAGS=`$PKG_CONFIG --cflags "xf86dgaproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25595,11 +18443,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DGA_LIBS="$DGA_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86dgaproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86dgaproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86dgaproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DGA_LIBS=`$PKG_CONFIG --libs "xf86dgaproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25626,7 +18474,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DGA_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xf86dgaproto) were not met:
+	as_fn_error "Package requirements (xf86dgaproto) were not met:
 
 $DGA_PKG_ERRORS
 
@@ -25636,33 +18484,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables DGA_CFLAGS
 and DGA_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (xf86dgaproto) were not met:
-
-$DGA_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables DGA_CFLAGS
-and DGA_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables DGA_CFLAGS
-and DGA_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -25671,31 +18497,26 @@ and DGA_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	DGA_CFLAGS=$pkg_cv_DGA_CFLAGS
 	DGA_LIBS=$pkg_cv_DGA_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
-cat >>confdefs.h <<\_ACEOF
-#define DGA 1
-_ACEOF
+$as_echo "#define DGA 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XFreeXDGA 1
-_ACEOF
+$as_echo "#define XFreeXDGA 1" >>confdefs.h
 
 	fi
 
 	if test "x$XF86VIDMODE" = xauto; then
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XF86VIDMODE" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XF86VIDMODE" >&5
 $as_echo_n "checking for XF86VIDMODE... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -25703,11 +18524,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XF86VIDMODE_CFLAGS="$XF86VIDMODE_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86vidmodeproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86vidmodeproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86vidmodeproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XF86VIDMODE_CFLAGS=`$PKG_CONFIG --cflags "xf86vidmodeproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25721,11 +18542,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XF86VIDMODE_LIBS="$XF86VIDMODE_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86vidmodeproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86vidmodeproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86vidmodeproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XF86VIDMODE_LIBS=`$PKG_CONFIG --libs "xf86vidmodeproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25752,7 +18573,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XF86VIDMODE_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 XF86VIDMODE=no
 elif test $pkg_failed = untried; then
@@ -25760,7 +18581,7 @@ elif test $pkg_failed = untried; then
 else
 	XF86VIDMODE_CFLAGS=$pkg_cv_XF86VIDMODE_CFLAGS
 	XF86VIDMODE_LIBS=$pkg_cv_XF86VIDMODE_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	XF86VIDMODE=yes
 fi
@@ -25769,7 +18590,7 @@ fi
 		XORG_MODULES="$XORG_MODULES xf86vidmodeproto"
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XF86VIDMODE" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XF86VIDMODE" >&5
 $as_echo_n "checking for XF86VIDMODE... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -25777,11 +18598,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XF86VIDMODE_CFLAGS="$XF86VIDMODE_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86vidmodeproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86vidmodeproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86vidmodeproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XF86VIDMODE_CFLAGS=`$PKG_CONFIG --cflags "xf86vidmodeproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25795,11 +18616,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XF86VIDMODE_LIBS="$XF86VIDMODE_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xf86vidmodeproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xf86vidmodeproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xf86vidmodeproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XF86VIDMODE_LIBS=`$PKG_CONFIG --libs "xf86vidmodeproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25826,18 +18647,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XF86VIDMODE_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xf86vidmodeproto) were not met:
-
-$XF86VIDMODE_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XF86VIDMODE_CFLAGS
-and XF86VIDMODE_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (xf86vidmodeproto) were not met:
+	as_fn_error "Package requirements (xf86vidmodeproto) were not met:
 
 $XF86VIDMODE_PKG_ERRORS
 
@@ -25847,12 +18657,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XF86VIDMODE_CFLAGS
 and XF86VIDMODE_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -25861,36 +18670,23 @@ and XF86VIDMODE_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XF86VIDMODE_CFLAGS
-and XF86VIDMODE_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XF86VIDMODE_CFLAGS=$pkg_cv_XF86VIDMODE_CFLAGS
 	XF86VIDMODE_LIBS=$pkg_cv_XF86VIDMODE_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
-cat >>confdefs.h <<\_ACEOF
-#define XF86VIDMODE 1
-_ACEOF
+$as_echo "#define XF86VIDMODE 1" >>confdefs.h
 
 	fi
 
 	if test -n "$XORG_MODULES"; then
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XORG_MODULES" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XORG_MODULES" >&5
 $as_echo_n "checking for XORG_MODULES... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -25898,11 +18694,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XORG_MODULES_CFLAGS="$XORG_MODULES_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$XORG_MODULES\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$XORG_MODULES\""; } >&5
   ($PKG_CONFIG --exists --print-errors "$XORG_MODULES") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XORG_MODULES_CFLAGS=`$PKG_CONFIG --cflags "$XORG_MODULES" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25916,11 +18712,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XORG_MODULES_LIBS="$XORG_MODULES_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$XORG_MODULES\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$XORG_MODULES\""; } >&5
   ($PKG_CONFIG --exists --print-errors "$XORG_MODULES") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XORG_MODULES_LIBS=`$PKG_CONFIG --libs "$XORG_MODULES" 2>/dev/null`
 else
   pkg_failed=yes
@@ -25947,7 +18743,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XORG_MODULES_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements ($XORG_MODULES) were not met:
+	as_fn_error "Package requirements ($XORG_MODULES) were not met:
 
 $XORG_MODULES_PKG_ERRORS
 
@@ -25957,23 +18753,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XORG_MODULES_CFLAGS
 and XORG_MODULES_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements ($XORG_MODULES) were not met:
-
-$XORG_MODULES_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XORG_MODULES_CFLAGS
-and XORG_MODULES_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -25982,22 +18766,11 @@ and XORG_MODULES_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XORG_MODULES_CFLAGS
-and XORG_MODULES_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XORG_MODULES_CFLAGS=$pkg_cv_XORG_MODULES_CFLAGS
 	XORG_MODULES_LIBS=$pkg_cv_XORG_MODULES_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
@@ -26013,9 +18786,9 @@ fi
 
 	# Extract the first word of "perl", so it can be a program name with args.
 set dummy perl; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PERL+set}" = set; then
+if test "${ac_cv_path_PERL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   case $PERL in
@@ -26028,14 +18801,14 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
   test -z "$ac_cv_path_PERL" && ac_cv_path_PERL="no"
@@ -26044,18 +18817,16 @@ esac
 fi
 PERL=$ac_cv_path_PERL
 if test -n "$PERL"; then
-  { $as_echo "$as_me:$LINENO: result: $PERL" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5
 $as_echo "$PERL" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
 		if test "x$PERL" = xno; then
-		{ { $as_echo "$as_me:$LINENO: error: Perl is required to build the XFree86/Xorg DDX." >&5
-$as_echo "$as_me: error: Perl is required to build the XFree86/Xorg DDX." >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "Perl is required to build the XFree86/Xorg DDX." "$LINENO" 5
 	fi
 
 
@@ -26065,24 +18836,16 @@ $as_echo "$as_me: error: Perl is required to build the XFree86/Xorg DDX." >&2;}
 	CONFIGFILE="$sysconfdir/$XF86CONFIGFILE"
 	LOGPREFIX="$logdir/Xorg."
 
-cat >>confdefs.h <<\_ACEOF
-#define XORG_SERVER 1
-_ACEOF
+$as_echo "#define XORG_SERVER 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XORGSERVER 1
-_ACEOF
+$as_echo "#define XORGSERVER 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XFree86Server 1
-_ACEOF
+$as_echo "#define XFree86Server 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XFree86LOADER 1
-_ACEOF
+$as_echo "#define XFree86LOADER 1" >>confdefs.h
 
 
 cat >>confdefs.h <<_ACEOF
@@ -26090,24 +18853,16 @@ cat >>confdefs.h <<_ACEOF
 _ACEOF
 
 
-cat >>confdefs.h <<\_ACEOF
-#define NEED_XF86_TYPES 1
-_ACEOF
+$as_echo "#define NEED_XF86_TYPES 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define NEED_XF86_PROTOTYPES 1
-_ACEOF
+$as_echo "#define NEED_XF86_PROTOTYPES 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define __XSERVERNAME__ "Xorg"
-_ACEOF
+$as_echo "#define __XSERVERNAME__ \"Xorg\"" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define WITH_VGAHW 1
-_ACEOF
+$as_echo "#define WITH_VGAHW 1" >>confdefs.h
 
 
   prefix_NONE=
@@ -26200,9 +18955,7 @@ cat >>confdefs.h <<_ACEOF
 _ACEOF
 
 
-cat >>confdefs.h <<\_ACEOF
-#define XSERVER_LIBPCIACCESS 1
-_ACEOF
+$as_echo "#define XSERVER_LIBPCIACCESS 1" >>confdefs.h
 
 
 	driverdir="$moduledir/drivers"
@@ -26319,7 +19072,7 @@ fi
 
 
 
-{ $as_echo "$as_me:$LINENO: checking whether to build XWin DDX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build XWin DDX" >&5
 $as_echo_n "checking whether to build XWin DDX... " >&6; }
 if test "x$XWIN" = xauto; then
 	case $host_os in
@@ -26330,7 +19083,7 @@ if test "x$XWIN" = xauto; then
 	XWIN_LIBS="$FB_LIB $XEXT_LIB $CONFIG_LIB $XI_LIB $XKB_LIB $XKB_STUB_LIB $COMPOSITE_LIB $DAMAGE_LIB $LAYER_LIB $XPSTUBS_LIB $SHADOW_LIB"
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $XWIN" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $XWIN" >&5
 $as_echo "$XWIN" >&6; }
 
 if test "x$XWIN" = xyes; then
@@ -26339,7 +19092,7 @@ if test "x$XWIN" = xyes; then
 			XWIN_SERVER_NAME=XWin
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XWINMODULES" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XWINMODULES" >&5
 $as_echo_n "checking for XWINMODULES... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -26347,11 +19100,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XWINMODULES_CFLAGS="$XWINMODULES_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xdmcp xau xfont\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11 xdmcp xau xfont\""; } >&5
   ($PKG_CONFIG --exists --print-errors "x11 xdmcp xau xfont") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XWINMODULES_CFLAGS=`$PKG_CONFIG --cflags "x11 xdmcp xau xfont" 2>/dev/null`
 else
   pkg_failed=yes
@@ -26365,11 +19118,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XWINMODULES_LIBS="$XWINMODULES_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xdmcp xau xfont\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11 xdmcp xau xfont\""; } >&5
   ($PKG_CONFIG --exists --print-errors "x11 xdmcp xau xfont") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XWINMODULES_LIBS=`$PKG_CONFIG --libs "x11 xdmcp xau xfont" 2>/dev/null`
 else
   pkg_failed=yes
@@ -26396,7 +19149,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XWINMODULES_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (x11 xdmcp xau xfont) were not met:
+	as_fn_error "Package requirements (x11 xdmcp xau xfont) were not met:
 
 $XWINMODULES_PKG_ERRORS
 
@@ -26406,33 +19159,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XWINMODULES_CFLAGS
 and XWINMODULES_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (x11 xdmcp xau xfont) were not met:
-
-$XWINMODULES_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XWINMODULES_CFLAGS
-and XWINMODULES_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XWINMODULES_CFLAGS
-and XWINMODULES_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -26441,24 +19172,19 @@ and XWINMODULES_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XWINMODULES_CFLAGS=$pkg_cv_XWINMODULES_CFLAGS
 	XWINMODULES_LIBS=$pkg_cv_XWINMODULES_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
-cat >>confdefs.h <<\_ACEOF
-#define HAS_DEVWINDOWS 1
-_ACEOF
+$as_echo "#define HAS_DEVWINDOWS 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define ROOTLESS 1
-_ACEOF
+$as_echo "#define ROOTLESS 1" >>confdefs.h
 
 			CFLAGS="$CFLAGS -DFD_SETSIZE=256"
 			;;
@@ -26466,7 +19192,7 @@ _ACEOF
 			XWIN_SERVER_NAME=Xming
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XWINMODULES" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XWINMODULES" >&5
 $as_echo_n "checking for XWINMODULES... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -26474,11 +19200,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XWINMODULES_CFLAGS="$XWINMODULES_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xdmcp xau xfont\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11 xdmcp xau xfont\""; } >&5
   ($PKG_CONFIG --exists --print-errors "x11 xdmcp xau xfont") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XWINMODULES_CFLAGS=`$PKG_CONFIG --cflags "x11 xdmcp xau xfont" 2>/dev/null`
 else
   pkg_failed=yes
@@ -26492,11 +19218,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XWINMODULES_LIBS="$XWINMODULES_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xdmcp xau xfont\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11 xdmcp xau xfont\""; } >&5
   ($PKG_CONFIG --exists --print-errors "x11 xdmcp xau xfont") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XWINMODULES_LIBS=`$PKG_CONFIG --libs "x11 xdmcp xau xfont" 2>/dev/null`
 else
   pkg_failed=yes
@@ -26523,7 +19249,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XWINMODULES_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (x11 xdmcp xau xfont) were not met:
+	as_fn_error "Package requirements (x11 xdmcp xau xfont) were not met:
 
 $XWINMODULES_PKG_ERRORS
 
@@ -26533,23 +19259,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XWINMODULES_CFLAGS
 and XWINMODULES_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (x11 xdmcp xau xfont) were not met:
-
-$XWINMODULES_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XWINMODULES_CFLAGS
-and XWINMODULES_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -26558,34 +19272,19 @@ and XWINMODULES_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XWINMODULES_CFLAGS
-and XWINMODULES_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XWINMODULES_CFLAGS=$pkg_cv_XWINMODULES_CFLAGS
 	XWINMODULES_LIBS=$pkg_cv_XWINMODULES_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
-cat >>confdefs.h <<\_ACEOF
-#define RELOCATE_PROJECTROOT 1
-_ACEOF
+$as_echo "#define RELOCATE_PROJECTROOT 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define HAS_WINSOCK 1
-_ACEOF
+$as_echo "#define HAS_WINSOCK 1" >>confdefs.h
 
 			XWIN_SYS_LIBS=-lwinsock2
 			;;
@@ -26596,39 +19295,29 @@ _ACEOF
 
 	if test "x$DEBUGGING" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define CYGDEBUG 1
-_ACEOF
+$as_echo "#define CYGDEBUG 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define CYGWINDOWING_DEBUG 1
-_ACEOF
+$as_echo "#define CYGWINDOWING_DEBUG 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define CYGMULTIWINDOW_DEBUG 1
-_ACEOF
+$as_echo "#define CYGMULTIWINDOW_DEBUG 1" >>confdefs.h
 
 	fi
 
 
-cat >>confdefs.h <<\_ACEOF
-#define DDXOSVERRORF 1
-_ACEOF
+$as_echo "#define DDXOSVERRORF 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define DDXBEFORERESET 1
-_ACEOF
+$as_echo "#define DDXBEFORERESET 1" >>confdefs.h
 
 	if test "x$XF86VIDMODE" = xyes; then
-		{ $as_echo "$as_me:$LINENO: Disabling XF86VidMode extension" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: Disabling XF86VidMode extension" >&5
 $as_echo "$as_me: Disabling XF86VidMode extension" >&6;}
 		XF86VIDMODE=no
 	fi
 	if test "x$COMPOSITE" = xyes; then
-		{ $as_echo "$as_me:$LINENO: Disabling Composite extension" >&5
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: Disabling Composite extension" >&5
 $as_echo "$as_me: Disabling Composite extension" >&6;}
 		COMPOSITE=no
 	fi
@@ -26708,31 +19397,23 @@ fi
 
 if test "x$XQUARTZ" = xyes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define XQUARTZ 1
-_ACEOF
+$as_echo "#define XQUARTZ 1" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define ROOTLESS 1
-_ACEOF
+$as_echo "#define ROOTLESS 1" >>confdefs.h
 
 
 	DARWIN_LIBS="$MI_LIB $OS_LIB $DIX_LIB $FB_LIB $FIXES_LIB $XEXT_LIB $CONFIG_LIB $DBE_LIB $RECORD_LIB $RANDR_LIB $RENDER_LIB $DAMAGE_LIB $MIEXT_DAMAGE_LIB $MIEXT_SHADOW_LIB $XI_LIB $XKB_LIB $XKB_STUB_LIB $XPSTUBS_LIB"
 
 
-	{ $as_echo "$as_me:$LINENO: checking for xp_init in -lXplugin" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for xp_init in -lXplugin" >&5
 $as_echo_n "checking for xp_init in -lXplugin... " >&6; }
-if test "${ac_cv_lib_Xplugin_xp_init+set}" = set; then
+if test "${ac_cv_lib_Xplugin_xp_init+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lXplugin  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -26750,43 +19431,18 @@ return xp_init ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_Xplugin_xp_init=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_Xplugin_xp_init=no
+  ac_cv_lib_Xplugin_xp_init=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_Xplugin_xp_init" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xplugin_xp_init" >&5
 $as_echo "$ac_cv_lib_Xplugin_xp_init" >&6; }
-if test "x$ac_cv_lib_Xplugin_xp_init" = x""yes; then
+if test "x$ac_cv_lib_Xplugin_xp_init" = x""yes; then :
   :
 fi
 
@@ -26795,7 +19451,7 @@ fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XPBPROXY" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XPBPROXY" >&5
 $as_echo_n "checking for XPBPROXY... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -26803,11 +19459,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XPBPROXY_CFLAGS="$XPBPROXY_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XPBPROXY_CFLAGS=`$PKG_CONFIG --cflags "applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -26821,11 +19477,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XPBPROXY_LIBS="$XPBPROXY_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XPBPROXY_LIBS=`$PKG_CONFIG --libs "applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -26852,7 +19508,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XPBPROXY_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11) were not met:
+	as_fn_error "Package requirements (applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11) were not met:
 
 $XPBPROXY_PKG_ERRORS
 
@@ -26862,33 +19518,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XPBPROXY_CFLAGS
 and XPBPROXY_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (applewmproto >= 1.1.1 applewm >= 1.0.0 xfixes fixesproto x11) were not met:
-
-$XPBPROXY_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XPBPROXY_CFLAGS
-and XPBPROXY_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XPBPROXY_CFLAGS
-and XPBPROXY_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -26897,21 +19531,18 @@ and XPBPROXY_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XPBPROXY_CFLAGS=$pkg_cv_XPBPROXY_CFLAGS
 	XPBPROXY_LIBS=$pkg_cv_XPBPROXY_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 	if test "x$STANDALONE_XPBPROXY" = xyes ; then
 
-cat >>confdefs.h <<\_ACEOF
-#define STANDALONE_XPBPROXY 1
-_ACEOF
+$as_echo "#define STANDALONE_XPBPROXY 1" >>confdefs.h
 
 	fi
 fi
@@ -26929,9 +19560,9 @@ OBJCFLAGS='$(CFLAGS)'
 
 depcc="$OBJC" am_compiler_list='gcc3 gcc'
 
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_OBJC_dependencies_compiler_type+set}" = set; then
+if test "${am_cv_OBJC_dependencies_compiler_type+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -26957,6 +19588,9 @@ else
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -26974,7 +19608,17 @@ else
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -26984,19 +19628,23 @@ else
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -27020,7 +19668,7 @@ else
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_OBJC_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_OBJC_dependencies_compiler_type" >&5
 $as_echo "$am_cv_OBJC_dependencies_compiler_type" >&6; }
 OBJCDEPMODE=depmode=$am_cv_OBJC_dependencies_compiler_type
 
@@ -27071,7 +19719,7 @@ fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DMXMODULES" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DMXMODULES" >&5
 $as_echo_n "checking for DMXMODULES... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -27079,11 +19727,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DMXMODULES_CFLAGS="$DMXMODULES_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xmuu xext x11 xrender xfixes xfont xi dmxproto xau \$XDMCP_MODULES\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xmuu xext x11 xrender xfixes xfont xi dmxproto xau \$XDMCP_MODULES\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xmuu xext x11 xrender xfixes xfont xi dmxproto xau $XDMCP_MODULES") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DMXMODULES_CFLAGS=`$PKG_CONFIG --cflags "xmuu xext x11 xrender xfixes xfont xi dmxproto xau $XDMCP_MODULES" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27097,11 +19745,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DMXMODULES_LIBS="$DMXMODULES_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xmuu xext x11 xrender xfixes xfont xi dmxproto xau \$XDMCP_MODULES\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xmuu xext x11 xrender xfixes xfont xi dmxproto xau \$XDMCP_MODULES\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xmuu xext x11 xrender xfixes xfont xi dmxproto xau $XDMCP_MODULES") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DMXMODULES_LIBS=`$PKG_CONFIG --libs "xmuu xext x11 xrender xfixes xfont xi dmxproto xau $XDMCP_MODULES" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27128,7 +19776,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DMXMODULES_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 have_dmx=no
 elif test $pkg_failed = untried; then
@@ -27136,11 +19784,11 @@ elif test $pkg_failed = untried; then
 else
 	DMXMODULES_CFLAGS=$pkg_cv_DMXMODULES_CFLAGS
 	DMXMODULES_LIBS=$pkg_cv_DMXMODULES_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	have_dmx=yes
 fi
-{ $as_echo "$as_me:$LINENO: checking whether to build Xdmx DDX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build Xdmx DDX" >&5
 $as_echo_n "checking whether to build Xdmx DDX... " >&6; }
 if test "x$DMX" = xauto; then
 	DMX="$have_dmx"
@@ -27149,7 +19797,7 @@ if test "x$DMX" = xauto; then
 		darwin*) DMX="no" ;;
 	esac
 fi
-{ $as_echo "$as_me:$LINENO: result: $DMX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DMX" >&5
 $as_echo "$DMX" >&6; }
  if test "x$DMX" = xyes; then
   DMX_TRUE=
@@ -27162,11 +19810,8 @@ fi
 
 if test "x$DMX" = xyes; then
 	if test "x$have_dmx" = xno; then
-		{ { $as_echo "$as_me:$LINENO: error: Xdmx build explicitly requested, but required
-		              modules not found." >&5
-$as_echo "$as_me: error: Xdmx build explicitly requested, but required
-		              modules not found." >&2;}
-   { (exit 1); exit 1; }; }
+		as_fn_error "Xdmx build explicitly requested, but required
+		              modules not found." "$LINENO" 5
 	fi
 	DMX_INCLUDES="$XEXT_INC $RENDER_INC $RECORD_INC"
 	XDMX_CFLAGS="$DMXMODULES_CFLAGS"
@@ -27176,278 +19821,16 @@ $as_echo "$as_me: error: Xdmx build explicitly requested, but required
 
 
 
-	if test "${ac_cv_header_linux_input_h+set}" = set; then
-  { $as_echo "$as_me:$LINENO: checking for linux/input.h" >&5
-$as_echo_n "checking for linux/input.h... " >&6; }
-if test "${ac_cv_header_linux_input_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_linux_input_h" >&5
-$as_echo "$ac_cv_header_linux_input_h" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking linux/input.h usability" >&5
-$as_echo_n "checking linux/input.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <linux/input.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking linux/input.h presence" >&5
-$as_echo_n "checking linux/input.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <linux/input.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: linux/input.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: linux/input.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/input.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: linux/input.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: linux/input.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: linux/input.h: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/input.h:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: linux/input.h:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/input.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: linux/input.h: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/input.h:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: linux/input.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/input.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: linux/input.h: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/input.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: linux/input.h: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for linux/input.h" >&5
-$as_echo_n "checking for linux/input.h... " >&6; }
-if test "${ac_cv_header_linux_input_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_header_linux_input_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_linux_input_h" >&5
-$as_echo "$ac_cv_header_linux_input_h" >&6; }
-
-fi
-if test "x$ac_cv_header_linux_input_h" = x""yes; then
+	ac_fn_c_check_header_mongrel "$LINENO" "linux/input.h" "ac_cv_header_linux_input_h" "$ac_includes_default"
+if test "x$ac_cv_header_linux_input_h" = x""yes; then :
   DMX_BUILD_USB="yes"
 else
   DMX_BUILD_USB="no"
 fi
 
 
-	if test "${ac_cv_header_linux_keyboard_h+set}" = set; then
-  { $as_echo "$as_me:$LINENO: checking for linux/keyboard.h" >&5
-$as_echo_n "checking for linux/keyboard.h... " >&6; }
-if test "${ac_cv_header_linux_keyboard_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_linux_keyboard_h" >&5
-$as_echo "$ac_cv_header_linux_keyboard_h" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking linux/keyboard.h usability" >&5
-$as_echo_n "checking linux/keyboard.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <linux/keyboard.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking linux/keyboard.h presence" >&5
-$as_echo_n "checking linux/keyboard.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <linux/keyboard.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: linux/keyboard.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: linux/keyboard.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/keyboard.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: linux/keyboard.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: linux/keyboard.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: linux/keyboard.h: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/keyboard.h:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: linux/keyboard.h:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/keyboard.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: linux/keyboard.h: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/keyboard.h:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: linux/keyboard.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/keyboard.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: linux/keyboard.h: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: linux/keyboard.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: linux/keyboard.h: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for linux/keyboard.h" >&5
-$as_echo_n "checking for linux/keyboard.h... " >&6; }
-if test "${ac_cv_header_linux_keyboard_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_header_linux_keyboard_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_linux_keyboard_h" >&5
-$as_echo "$ac_cv_header_linux_keyboard_h" >&6; }
-
-fi
-if test "x$ac_cv_header_linux_keyboard_h" = x""yes; then
+	ac_fn_c_check_header_mongrel "$LINENO" "linux/keyboard.h" "ac_cv_header_linux_keyboard_h" "$ac_includes_default"
+if test "x$ac_cv_header_linux_keyboard_h" = x""yes; then :
   DMX_BUILD_LNX="yes"
 else
   DMX_BUILD_LNX="no"
@@ -27457,7 +19840,7 @@ fi
 	if test "x$GLX" = xyes; then
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for GL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GL" >&5
 $as_echo_n "checking for GL... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -27465,11 +19848,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_GL_CFLAGS="$GL_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "glproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_GL_CFLAGS=`$PKG_CONFIG --cflags "glproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27483,11 +19866,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_GL_LIBS="$GL_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glproto\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glproto\""; } >&5
   ($PKG_CONFIG --exists --print-errors "glproto") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_GL_LIBS=`$PKG_CONFIG --libs "glproto" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27514,7 +19897,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$GL_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (glproto) were not met:
+	as_fn_error "Package requirements (glproto) were not met:
 
 $GL_PKG_ERRORS
 
@@ -27524,23 +19907,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables GL_CFLAGS
 and GL_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (glproto) were not met:
-
-$GL_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables GL_CFLAGS
-and GL_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -27549,29 +19920,18 @@ and GL_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables GL_CFLAGS
-and GL_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	GL_CFLAGS=$pkg_cv_GL_CFLAGS
 	GL_LIBS=$pkg_cv_GL_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 	fi
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XDMXCONFIG_DEP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XDMXCONFIG_DEP" >&5
 $as_echo_n "checking for XDMXCONFIG_DEP... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -27579,11 +19939,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XDMXCONFIG_DEP_CFLAGS="$XDMXCONFIG_DEP_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xaw7 xmu xt xpm x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xaw7 xmu xt xpm x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xaw7 xmu xt xpm x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XDMXCONFIG_DEP_CFLAGS=`$PKG_CONFIG --cflags "xaw7 xmu xt xpm x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27597,11 +19957,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XDMXCONFIG_DEP_LIBS="$XDMXCONFIG_DEP_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xaw7 xmu xt xpm x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xaw7 xmu xt xpm x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xaw7 xmu xt xpm x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XDMXCONFIG_DEP_LIBS=`$PKG_CONFIG --libs "xaw7 xmu xt xpm x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27628,7 +19988,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XDMXCONFIG_DEP_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xaw7 xmu xt xpm x11) were not met:
+	as_fn_error "Package requirements (xaw7 xmu xt xpm x11) were not met:
 
 $XDMXCONFIG_DEP_PKG_ERRORS
 
@@ -27638,33 +19998,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XDMXCONFIG_DEP_CFLAGS
 and XDMXCONFIG_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (xaw7 xmu xt xpm x11) were not met:
-
-$XDMXCONFIG_DEP_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XDMXCONFIG_DEP_CFLAGS
-and XDMXCONFIG_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XDMXCONFIG_DEP_CFLAGS
-and XDMXCONFIG_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -27673,12 +20011,11 @@ and XDMXCONFIG_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XDMXCONFIG_DEP_CFLAGS=$pkg_cv_XDMXCONFIG_DEP_CFLAGS
 	XDMXCONFIG_DEP_LIBS=$pkg_cv_XDMXCONFIG_DEP_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
@@ -27686,7 +20023,7 @@ fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DMXEXAMPLES_DEP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DMXEXAMPLES_DEP" >&5
 $as_echo_n "checking for DMXEXAMPLES_DEP... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -27694,11 +20031,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DMXEXAMPLES_DEP_CFLAGS="$DMXEXAMPLES_DEP_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dmx xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dmx xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dmx xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DMXEXAMPLES_DEP_CFLAGS=`$PKG_CONFIG --cflags "dmx xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27712,11 +20049,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DMXEXAMPLES_DEP_LIBS="$DMXEXAMPLES_DEP_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dmx xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dmx xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dmx xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DMXEXAMPLES_DEP_LIBS=`$PKG_CONFIG --libs "dmx xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27743,7 +20080,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DMXEXAMPLES_DEP_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (dmx xext x11) were not met:
+	as_fn_error "Package requirements (dmx xext x11) were not met:
 
 $DMXEXAMPLES_DEP_PKG_ERRORS
 
@@ -27753,23 +20090,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables DMXEXAMPLES_DEP_CFLAGS
 and DMXEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (dmx xext x11) were not met:
-
-$DMXEXAMPLES_DEP_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables DMXEXAMPLES_DEP_CFLAGS
-and DMXEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -27778,29 +20103,18 @@ and DMXEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables DMXEXAMPLES_DEP_CFLAGS
-and DMXEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	DMXEXAMPLES_DEP_CFLAGS=$pkg_cv_DMXEXAMPLES_DEP_CFLAGS
 	DMXEXAMPLES_DEP_LIBS=$pkg_cv_DMXEXAMPLES_DEP_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DMXXMUEXAMPLES_DEP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DMXXMUEXAMPLES_DEP" >&5
 $as_echo_n "checking for DMXXMUEXAMPLES_DEP... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -27808,11 +20122,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DMXXMUEXAMPLES_DEP_CFLAGS="$DMXXMUEXAMPLES_DEP_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dmx xmu xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dmx xmu xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dmx xmu xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DMXXMUEXAMPLES_DEP_CFLAGS=`$PKG_CONFIG --cflags "dmx xmu xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27826,11 +20140,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DMXXMUEXAMPLES_DEP_LIBS="$DMXXMUEXAMPLES_DEP_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dmx xmu xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dmx xmu xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dmx xmu xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DMXXMUEXAMPLES_DEP_LIBS=`$PKG_CONFIG --libs "dmx xmu xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27857,18 +20171,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DMXXMUEXAMPLES_DEP_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (dmx xmu xext x11) were not met:
-
-$DMXXMUEXAMPLES_DEP_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables DMXXMUEXAMPLES_DEP_CFLAGS
-and DMXXMUEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (dmx xmu xext x11) were not met:
+	as_fn_error "Package requirements (dmx xmu xext x11) were not met:
 
 $DMXXMUEXAMPLES_DEP_PKG_ERRORS
 
@@ -27878,22 +20181,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables DMXXMUEXAMPLES_DEP_CFLAGS
 and DMXXMUEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables DMXXMUEXAMPLES_DEP_CFLAGS
-and DMXXMUEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -27902,19 +20194,18 @@ and DMXXMUEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	DMXXMUEXAMPLES_DEP_CFLAGS=$pkg_cv_DMXXMUEXAMPLES_DEP_CFLAGS
 	DMXXMUEXAMPLES_DEP_LIBS=$pkg_cv_DMXXMUEXAMPLES_DEP_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for DMXXIEXAMPLES_DEP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DMXXIEXAMPLES_DEP" >&5
 $as_echo_n "checking for DMXXIEXAMPLES_DEP... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -27922,11 +20213,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DMXXIEXAMPLES_DEP_CFLAGS="$DMXXIEXAMPLES_DEP_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dmx xi xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dmx xi xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dmx xi xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DMXXIEXAMPLES_DEP_CFLAGS=`$PKG_CONFIG --cflags "dmx xi xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27940,11 +20231,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_DMXXIEXAMPLES_DEP_LIBS="$DMXXIEXAMPLES_DEP_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dmx xi xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"dmx xi xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "dmx xi xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_DMXXIEXAMPLES_DEP_LIBS=`$PKG_CONFIG --libs "dmx xi xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -27971,7 +20262,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$DMXXIEXAMPLES_DEP_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (dmx xi xext x11) were not met:
+	as_fn_error "Package requirements (dmx xi xext x11) were not met:
 
 $DMXXIEXAMPLES_DEP_PKG_ERRORS
 
@@ -27981,33 +20272,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables DMXXIEXAMPLES_DEP_CFLAGS
 and DMXXIEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (dmx xi xext x11) were not met:
-
-$DMXXIEXAMPLES_DEP_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables DMXXIEXAMPLES_DEP_CFLAGS
-and DMXXIEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables DMXXIEXAMPLES_DEP_CFLAGS
-and DMXXIEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -28016,19 +20285,18 @@ and DMXXIEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	DMXXIEXAMPLES_DEP_CFLAGS=$pkg_cv_DMXXIEXAMPLES_DEP_CFLAGS
 	DMXXIEXAMPLES_DEP_LIBS=$pkg_cv_DMXXIEXAMPLES_DEP_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XTSTEXAMPLES_DEP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XTSTEXAMPLES_DEP" >&5
 $as_echo_n "checking for XTSTEXAMPLES_DEP... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -28036,11 +20304,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XTSTEXAMPLES_DEP_CFLAGS="$XTSTEXAMPLES_DEP_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xtst xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xtst xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xtst xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XTSTEXAMPLES_DEP_CFLAGS=`$PKG_CONFIG --cflags "xtst xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -28054,11 +20322,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XTSTEXAMPLES_DEP_LIBS="$XTSTEXAMPLES_DEP_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xtst xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xtst xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xtst xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XTSTEXAMPLES_DEP_LIBS=`$PKG_CONFIG --libs "xtst xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -28085,18 +20353,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XTSTEXAMPLES_DEP_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xtst xext x11) were not met:
-
-$XTSTEXAMPLES_DEP_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XTSTEXAMPLES_DEP_CFLAGS
-and XTSTEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (xtst xext x11) were not met:
+	as_fn_error "Package requirements (xtst xext x11) were not met:
 
 $XTSTEXAMPLES_DEP_PKG_ERRORS
 
@@ -28106,22 +20363,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XTSTEXAMPLES_DEP_CFLAGS
 and XTSTEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XTSTEXAMPLES_DEP_CFLAGS
-and XTSTEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -28130,19 +20376,18 @@ and XTSTEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XTSTEXAMPLES_DEP_CFLAGS=$pkg_cv_XTSTEXAMPLES_DEP_CFLAGS
 	XTSTEXAMPLES_DEP_LIBS=$pkg_cv_XTSTEXAMPLES_DEP_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XRESEXAMPLES_DEP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XRESEXAMPLES_DEP" >&5
 $as_echo_n "checking for XRESEXAMPLES_DEP... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -28150,11 +20395,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XRESEXAMPLES_DEP_CFLAGS="$XRESEXAMPLES_DEP_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xres xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xres xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xres xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XRESEXAMPLES_DEP_CFLAGS=`$PKG_CONFIG --cflags "xres xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -28168,11 +20413,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XRESEXAMPLES_DEP_LIBS="$XRESEXAMPLES_DEP_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xres xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xres xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xres xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XRESEXAMPLES_DEP_LIBS=`$PKG_CONFIG --libs "xres xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -28199,7 +20444,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XRESEXAMPLES_DEP_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xres xext x11) were not met:
+	as_fn_error "Package requirements (xres xext x11) were not met:
 
 $XRESEXAMPLES_DEP_PKG_ERRORS
 
@@ -28209,23 +20454,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables XRESEXAMPLES_DEP_CFLAGS
 and XRESEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (xres xext x11) were not met:
-
-$XRESEXAMPLES_DEP_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XRESEXAMPLES_DEP_CFLAGS
-and XRESEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -28234,29 +20467,18 @@ and XRESEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XRESEXAMPLES_DEP_CFLAGS
-and XRESEXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	XRESEXAMPLES_DEP_CFLAGS=$pkg_cv_XRESEXAMPLES_DEP_CFLAGS
 	XRESEXAMPLES_DEP_LIBS=$pkg_cv_XRESEXAMPLES_DEP_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for X11EXAMPLES_DEP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11EXAMPLES_DEP" >&5
 $as_echo_n "checking for X11EXAMPLES_DEP... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -28264,11 +20486,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_X11EXAMPLES_DEP_CFLAGS="$X11EXAMPLES_DEP_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_X11EXAMPLES_DEP_CFLAGS=`$PKG_CONFIG --cflags "xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -28282,11 +20504,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_X11EXAMPLES_DEP_LIBS="$X11EXAMPLES_DEP_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xext x11\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xext x11\""; } >&5
   ($PKG_CONFIG --exists --print-errors "xext x11") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_X11EXAMPLES_DEP_LIBS=`$PKG_CONFIG --libs "xext x11" 2>/dev/null`
 else
   pkg_failed=yes
@@ -28313,7 +20535,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$X11EXAMPLES_DEP_PKG_ERRORS" >&5
 
-	{ { $as_echo "$as_me:$LINENO: error: Package requirements (xext x11) were not met:
+	as_fn_error "Package requirements (xext x11) were not met:
 
 $X11EXAMPLES_DEP_PKG_ERRORS
 
@@ -28323,33 +20545,11 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables X11EXAMPLES_DEP_CFLAGS
 and X11EXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
-" >&5
-$as_echo "$as_me: error: Package requirements (xext x11) were not met:
-
-$X11EXAMPLES_DEP_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables X11EXAMPLES_DEP_CFLAGS
-and X11EXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-" >&2;}
-   { (exit 1); exit 1; }; }
+" "$LINENO" 5
 elif test $pkg_failed = untried; then
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables X11EXAMPLES_DEP_CFLAGS
-and X11EXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: The pkg-config script could not be found or is too old.  Make sure it
+as_fn_error "The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
@@ -28358,12 +20558,11 @@ and X11EXAMPLES_DEP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
 else
 	X11EXAMPLES_DEP_CFLAGS=$pkg_cv_X11EXAMPLES_DEP_CFLAGS
 	X11EXAMPLES_DEP_LIBS=$pkg_cv_X11EXAMPLES_DEP_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	:
 fi
@@ -28403,160 +20602,18 @@ fi
 
 if test "$KDRIVE" = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define KDRIVESERVER 1
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define KDRIVEDDXACTIONS /**/
-_ACEOF
-
+$as_echo "#define KDRIVESERVER 1" >>confdefs.h
 
 
+$as_echo "#define KDRIVEDDXACTIONS /**/" >>confdefs.h
 
-for ac_header in sys/vm86.h sys/io.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
 
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+    for ac_header in sys/vm86.h sys/io.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -28572,157 +20629,16 @@ done
     if test "x$KDRIVEVESA" = xyes; then
         KDRIVEFBDEVLIB=yes
 
-cat >>confdefs.h <<\_ACEOF
-#define KDRIVEVESA 1
-_ACEOF
+$as_echo "#define KDRIVEVESA 1" >>confdefs.h
 
     fi
 
-
-for ac_header in linux/fb.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+    for ac_header in linux/fb.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "linux/fb.h" "ac_cv_header_linux_fb_h" "$ac_includes_default"
+if test "x$ac_cv_header_linux_fb_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_LINUX_FB_H 1
 _ACEOF
 
 fi
@@ -28736,25 +20652,19 @@ done
     if test "x$XFBDEV" = xyes; then
         KDRIVEFBDEVLIB=yes
 
-cat >>confdefs.h <<\_ACEOF
-#define KDRIVEFBDEV 1
-_ACEOF
+$as_echo "#define KDRIVEFBDEV 1" >>confdefs.h
 
     fi
 
     # tslib...
-    { $as_echo "$as_me:$LINENO: checking for ts_open in -lts" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ts_open in -lts" >&5
 $as_echo_n "checking for ts_open in -lts... " >&6; }
-if test "${ac_cv_lib_ts_ts_open+set}" = set; then
+if test "${ac_cv_lib_ts_ts_open+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lts  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -28772,43 +20682,18 @@ return ts_open ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_ts_ts_open=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_ts_ts_open=no
+  ac_cv_lib_ts_ts_open=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ts_ts_open" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ts_ts_open" >&5
 $as_echo "$ac_cv_lib_ts_ts_open" >&6; }
-if test "x$ac_cv_lib_ts_ts_open" = x""yes; then
+if test "x$ac_cv_lib_ts_ts_open" = x""yes; then :
   HAVE_TSLIB="yes"
 fi
 
@@ -28818,163 +20703,20 @@ fi
 
     if test "x$TSLIB" = xyes; then
         if ! test "x$HAVE_TSLIB" = xyes; then
-            { { $as_echo "$as_me:$LINENO: error: tslib must be installed to build the tslib input driver." >&5
-$as_echo "$as_me: error: tslib must be installed to build the tslib input driver." >&2;}
-   { (exit 1); exit 1; }; }
+            as_fn_error "tslib must be installed to build the tslib input driver." "$LINENO" 5
         fi
         TSLIB_LIBS="-lts"
 
-cat >>confdefs.h <<\_ACEOF
-#define TSLIB 1
-_ACEOF
+$as_echo "#define TSLIB 1" >>confdefs.h
 
     fi
 
-
-for ac_header in SDL/SDL.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## ---------------------------------------------------------------------- ##
-## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
-## ---------------------------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+    for ac_header in SDL/SDL.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "SDL/SDL.h" "ac_cv_header_SDL_SDL_h" "$ac_includes_default"
+if test "x$ac_cv_header_SDL_SDL_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_SDL_SDL_H 1
 _ACEOF
 
 fi
@@ -28988,9 +20730,7 @@ done
     if test x"$XSDL" = xyes; then
        # PKG_CHECK_MODULES(XSDL_EXTRA, Xfont xau $XDMCP_MODULES)
 
-cat >>confdefs.h <<\_ACEOF
-#define XSDLSERVER 1
-_ACEOF
+$as_echo "#define XSDLSERVER 1" >>confdefs.h
 
        XSDL_LIBS="`sdl-config --libs`"
        XSDL_INCS="`sdl-config --cflags` $XSERVER_CFLAGS"
@@ -29006,7 +20746,7 @@ _ACEOF
 
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for XEPHYR" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XEPHYR" >&5
 $as_echo_n "checking for XEPHYR... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -29014,11 +20754,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XEPHYR_CFLAGS="$XEPHYR_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$XEPHYR_REQUIRED_LIBS\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$XEPHYR_REQUIRED_LIBS\""; } >&5
   ($PKG_CONFIG --exists --print-errors "$XEPHYR_REQUIRED_LIBS") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XEPHYR_CFLAGS=`$PKG_CONFIG --cflags "$XEPHYR_REQUIRED_LIBS" 2>/dev/null`
 else
   pkg_failed=yes
@@ -29032,11 +20772,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_XEPHYR_LIBS="$XEPHYR_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$XEPHYR_REQUIRED_LIBS\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$XEPHYR_REQUIRED_LIBS\""; } >&5
   ($PKG_CONFIG --exists --print-errors "$XEPHYR_REQUIRED_LIBS") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_XEPHYR_LIBS=`$PKG_CONFIG --libs "$XEPHYR_REQUIRED_LIBS" 2>/dev/null`
 else
   pkg_failed=yes
@@ -29063,7 +20803,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$XEPHYR_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 xephyr="no"
 elif test $pkg_failed = untried; then
@@ -29071,7 +20811,7 @@ elif test $pkg_failed = untried; then
 else
 	XEPHYR_CFLAGS=$pkg_cv_XEPHYR_CFLAGS
 	XEPHYR_LIBS=$pkg_cv_XEPHYR_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	xephyr="yes"
 fi
@@ -29080,106 +20820,18 @@ fi
     fi
 
     # Xephyr needs nanosleep() which is in librt on Solaris
-    { $as_echo "$as_me:$LINENO: checking for nanosleep" >&5
-$as_echo_n "checking for nanosleep... " >&6; }
-if test "${ac_cv_func_nanosleep+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define nanosleep to an innocuous variant, in case <limits.h> declares nanosleep.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define nanosleep innocuous_nanosleep
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char nanosleep (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+    ac_fn_c_check_func "$LINENO" "nanosleep" "ac_cv_func_nanosleep"
+if test "x$ac_cv_func_nanosleep" = x""yes; then :
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef nanosleep
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char nanosleep ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_nanosleep || defined __stub___nanosleep
-choke me
-#endif
-
-int
-main ()
-{
-return nanosleep ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_nanosleep=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_nanosleep=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_nanosleep" >&5
-$as_echo "$ac_cv_func_nanosleep" >&6; }
-if test "x$ac_cv_func_nanosleep" = x""yes; then
-  :
-else
-  { $as_echo "$as_me:$LINENO: checking for nanosleep in -lrt" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nanosleep in -lrt" >&5
 $as_echo_n "checking for nanosleep in -lrt... " >&6; }
-if test "${ac_cv_lib_rt_nanosleep+set}" = set; then
+if test "${ac_cv_lib_rt_nanosleep+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lrt  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -29197,43 +20849,18 @@ return nanosleep ();
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_rt_nanosleep=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_rt_nanosleep=no
+  ac_cv_lib_rt_nanosleep=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_rt_nanosleep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_nanosleep" >&5
 $as_echo "$ac_cv_lib_rt_nanosleep" >&6; }
-if test "x$ac_cv_lib_rt_nanosleep" = x""yes; then
+if test "x$ac_cv_lib_rt_nanosleep" = x""yes; then :
   XEPHYR_LIBS="$XEPHYR_LIBS -lrt"
 fi
 
@@ -29243,7 +20870,7 @@ fi
     if test "x$TSLIB" = xyes; then
 
 pkg_failed=no
-{ $as_echo "$as_me:$LINENO: checking for TSLIB" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for TSLIB" >&5
 $as_echo_n "checking for TSLIB... " >&6; }
 
 if test -n "$PKG_CONFIG"; then
@@ -29251,11 +20878,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_TSLIB_CFLAGS="$TSLIB_CFLAGS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"tslib-1.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"tslib-1.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "tslib-1.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_TSLIB_CFLAGS=`$PKG_CONFIG --cflags "tslib-1.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -29269,11 +20896,11 @@ if test -n "$PKG_CONFIG"; then
         pkg_cv_TSLIB_LIBS="$TSLIB_LIBS"
     else
         if test -n "$PKG_CONFIG" && \
-    { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"tslib-1.0\"") >&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"tslib-1.0\""; } >&5
   ($PKG_CONFIG --exists --print-errors "tslib-1.0") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
   pkg_cv_TSLIB_LIBS=`$PKG_CONFIG --libs "tslib-1.0" 2>/dev/null`
 else
   pkg_failed=yes
@@ -29300,7 +20927,7 @@ fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$TSLIB_PKG_ERRORS" >&5
 
-	{ $as_echo "$as_me:$LINENO: result: no" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
                 HAVE_TSLIB="no"
 elif test $pkg_failed = untried; then
@@ -29308,19 +20935,15 @@ elif test $pkg_failed = untried; then
 else
 	TSLIB_CFLAGS=$pkg_cv_TSLIB_CFLAGS
 	TSLIB_LIBS=$pkg_cv_TSLIB_LIBS
-        { $as_echo "$as_me:$LINENO: result: yes" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	HAVE_TSLIB="yes"
 fi
         if test "x$HAVE_TSLIB" = xno; then
-            { { $as_echo "$as_me:$LINENO: error: tslib must be installed to build the tslib driver. See http://tslib.berlios.de/" >&5
-$as_echo "$as_me: error: tslib must be installed to build the tslib driver. See http://tslib.berlios.de/" >&2;}
-   { (exit 1); exit 1; }; }
+            as_fn_error "tslib must be installed to build the tslib driver. See http://tslib.berlios.de/" "$LINENO" 5
         fi
 
-cat >>confdefs.h <<\_ACEOF
-#define TSLIB 1
-_ACEOF
+$as_echo "#define TSLIB 1" >>confdefs.h
 
     fi
 
@@ -29423,9 +21046,7 @@ fi
 
 
 
-cat >>confdefs.h <<\_ACEOF
-#define __XKBDEFRULES__ "xorg"
-_ACEOF
+$as_echo "#define __XKBDEFRULES__ \"xorg\"" >>confdefs.h
 
 
   prefix_NONE=
@@ -29496,11 +21117,7 @@ _ACEOF
 
 
 
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #include <features.h>
@@ -29516,36 +21133,11 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-
-cat >>confdefs.h <<\_ACEOF
-#define _GNU_SOURCE 1
-_ACEOF
-
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_compile "$LINENO"; then :
 
+$as_echo "#define _GNU_SOURCE 1" >>confdefs.h
 
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 
@@ -29681,13 +21273,13 @@ _ACEOF
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
       BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) $as_unset $ac_var ;;
+      *) { eval $ac_var=; unset $ac_var;} ;;
       esac ;;
     esac
   done
@@ -29695,8 +21287,8 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
   (set) 2>&1 |
     case $as_nl`(ac_space=' '; set) 2>&1` in #(
     *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
@@ -29719,11 +21311,11 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
     test "x$cache_file" != "x/dev/null" &&
-      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
 $as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
@@ -29743,702 +21335,420 @@ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
   # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
   #    will be set to the directory where LIBOBJS objects are built.
-  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
 LTLIBOBJS=$ac_ltlibobjs
 
 
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
 if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCCAS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCCAS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"am__fastdepCCAS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XSERVER_DTRACE_TRUE}" && test -z "${XSERVER_DTRACE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XSERVER_DTRACE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XSERVER_DTRACE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XSERVER_DTRACE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
 if test -z "${NEED_STRLCAT_TRUE}" && test -z "${NEED_STRLCAT_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"NEED_STRLCAT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"NEED_STRLCAT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"NEED_STRLCAT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${NEED_VSNPRINTF_TRUE}" && test -z "${NEED_VSNPRINTF_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"NEED_VSNPRINTF\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"NEED_VSNPRINTF\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"NEED_VSNPRINTF\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${AGP_TRUE}" && test -z "${AGP_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"AGP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"AGP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"AGP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${LNXAPM_TRUE}" && test -z "${LNXAPM_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"LNXAPM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"LNXAPM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"LNXAPM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${FBDEVHW_TRUE}" && test -z "${FBDEVHW_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"FBDEVHW\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"FBDEVHW\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"FBDEVHW\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${FREEBSD_KLDLOAD_TRUE}" && test -z "${FREEBSD_KLDLOAD_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"FREEBSD_KLDLOAD\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"FREEBSD_KLDLOAD\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"FREEBSD_KLDLOAD\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${BSD_APM_TRUE}" && test -z "${BSD_APM_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"BSD_APM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"BSD_APM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"BSD_APM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${BSD_KQUEUE_APM_TRUE}" && test -z "${BSD_KQUEUE_APM_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"BSD_KQUEUE_APM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"BSD_KQUEUE_APM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"BSD_KQUEUE_APM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${ALPHA_VIDEO_TRUE}" && test -z "${ALPHA_VIDEO_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"ALPHA_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"ALPHA_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"ALPHA_VIDEO\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${ARM_VIDEO_TRUE}" && test -z "${ARM_VIDEO_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"ARM_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"ARM_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"ARM_VIDEO\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${I386_VIDEO_TRUE}" && test -z "${I386_VIDEO_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"I386_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"I386_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"I386_VIDEO\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${PPC_VIDEO_TRUE}" && test -z "${PPC_VIDEO_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"PPC_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"PPC_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"PPC_VIDEO\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SPARC64_VIDEO_TRUE}" && test -z "${SPARC64_VIDEO_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"SPARC64_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"SPARC64_VIDEO\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"SPARC64_VIDEO\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${KDRIVE_HW_TRUE}" && test -z "${KDRIVE_HW_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"KDRIVE_HW\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"KDRIVE_HW\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"KDRIVE_HW\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${INSTALL_SETUID_TRUE}" && test -z "${INSTALL_SETUID_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"INSTALL_SETUID\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"INSTALL_SETUID\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"INSTALL_SETUID\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SECURE_RPC_TRUE}" && test -z "${SECURE_RPC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"SECURE_RPC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"SECURE_RPC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"SECURE_RPC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${INT10_VM86_TRUE}" && test -z "${INT10_VM86_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"INT10_VM86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"INT10_VM86\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"INT10_VM86\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${INT10_X86EMU_TRUE}" && test -z "${INT10_X86EMU_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"INT10_X86EMU\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"INT10_X86EMU\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"INT10_X86EMU\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${INT10_STUB_TRUE}" && test -z "${INT10_STUB_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"INT10_STUB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"INT10_STUB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"INT10_STUB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${BUILDDOCS_TRUE}" && test -z "${BUILDDOCS_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"BUILDDOCS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"BUILDDOCS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"BUILDDOCS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${BUILD_LINUXDOC_TRUE}" && test -z "${BUILD_LINUXDOC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_LINUXDOC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"BUILD_LINUXDOC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"BUILD_LINUXDOC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${BUILD_PDFDOC_TRUE}" && test -z "${BUILD_PDFDOC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PDFDOC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"BUILD_PDFDOC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"BUILD_PDFDOC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${INSTALL_LIBXF86CONFIG_TRUE}" && test -z "${INSTALL_LIBXF86CONFIG_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"INSTALL_LIBXF86CONFIG\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"INSTALL_LIBXF86CONFIG\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"INSTALL_LIBXF86CONFIG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_DBUS_TRUE}" && test -z "${HAVE_DBUS_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_DBUS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"HAVE_DBUS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"HAVE_DBUS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${CONFIG_DBUS_API_TRUE}" && test -z "${CONFIG_DBUS_API_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"CONFIG_DBUS_API\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"CONFIG_DBUS_API\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"CONFIG_DBUS_API\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${CONFIG_HAL_TRUE}" && test -z "${CONFIG_HAL_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"CONFIG_HAL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"CONFIG_HAL\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"CONFIG_HAL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${CONFIG_NEED_DBUS_TRUE}" && test -z "${CONFIG_NEED_DBUS_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"CONFIG_NEED_DBUS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"CONFIG_NEED_DBUS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"CONFIG_NEED_DBUS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XV_TRUE}" && test -z "${XV_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XV\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XV\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XVMC_TRUE}" && test -z "${XVMC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XVMC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XVMC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XVMC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XREGISTRY_TRUE}" && test -z "${XREGISTRY_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XREGISTRY\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XREGISTRY\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XREGISTRY\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${COMPOSITE_TRUE}" && test -z "${COMPOSITE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"COMPOSITE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"COMPOSITE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"COMPOSITE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${MITSHM_TRUE}" && test -z "${MITSHM_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"MITSHM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"MITSHM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"MITSHM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${RECORD_TRUE}" && test -z "${RECORD_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"RECORD\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"RECORD\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"RECORD\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SCREENSAVER_TRUE}" && test -z "${SCREENSAVER_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"SCREENSAVER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"SCREENSAVER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"SCREENSAVER\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${RES_TRUE}" && test -z "${RES_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"RES\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"RES\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"RES\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${GLX_TRUE}" && test -z "${GLX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"GLX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"GLX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"GLX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${AIGLX_TRUE}" && test -z "${AIGLX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"AIGLX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"AIGLX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"AIGLX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DRI_TRUE}" && test -z "${DRI_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DRI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DRI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DRI\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DRI2_TRUE}" && test -z "${DRI2_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DRI2\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DRI2\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DRI2\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DRI2_AIGLX_TRUE}" && test -z "${DRI2_AIGLX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DRI2_AIGLX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DRI2_AIGLX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DRI2_AIGLX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XINERAMA_TRUE}" && test -z "${XINERAMA_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XINERAMA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XINERAMA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XINERAMA\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XACE_TRUE}" && test -z "${XACE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XACE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XACE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XACE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XSELINUX_TRUE}" && test -z "${XSELINUX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XSELINUX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XSELINUX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XSELINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XCSECURITY_TRUE}" && test -z "${XCSECURITY_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XCSECURITY\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XCSECURITY\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XCSECURITY\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${MULTIBUFFER_TRUE}" && test -z "${MULTIBUFFER_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"MULTIBUFFER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"MULTIBUFFER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"MULTIBUFFER\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DBE_TRUE}" && test -z "${DBE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DBE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DBE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DBE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XF86BIGFONT_TRUE}" && test -z "${XF86BIGFONT_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XF86BIGFONT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XF86BIGFONT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XF86BIGFONT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DPMSExtension_TRUE}" && test -z "${DPMSExtension_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DPMSExtension\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DPMSExtension\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DPMSExtension\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XCALIBRATE_TRUE}" && test -z "${XCALIBRATE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XCALIBRATE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XCALIBRATE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XCALIBRATE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XF86UTILS_TRUE}" && test -z "${XF86UTILS_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XF86UTILS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XF86UTILS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XF86UTILS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XDMCP_TRUE}" && test -z "${XDMCP_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XDMCP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XDMCP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XDMCP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XDMAUTH_TRUE}" && test -z "${XDMAUTH_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XDMAUTH\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XDMAUTH\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XDMAUTH\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DEBUG_TRUE}" && test -z "${DEBUG_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DEBUG\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DEBUG\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DEBUG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XVFB_TRUE}" && test -z "${XVFB_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XVFB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XVFB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XVFB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XNEST_TRUE}" && test -z "${XNEST_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XNEST\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XNEST\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XNEST\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XORG_TRUE}" && test -z "${XORG_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XORG\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XORG\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XORG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XORG_BUS_LINUXPCI_TRUE}" && test -z "${XORG_BUS_LINUXPCI_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XORG_BUS_LINUXPCI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XORG_BUS_LINUXPCI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XORG_BUS_LINUXPCI\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XORG_BUS_BSDPCI_TRUE}" && test -z "${XORG_BUS_BSDPCI_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XORG_BUS_BSDPCI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XORG_BUS_BSDPCI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XORG_BUS_BSDPCI\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XORG_BUS_SPARC_TRUE}" && test -z "${XORG_BUS_SPARC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XORG_BUS_SPARC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XORG_BUS_SPARC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XORG_BUS_SPARC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${LINUX_IA64_TRUE}" && test -z "${LINUX_IA64_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"LINUX_IA64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"LINUX_IA64\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"LINUX_IA64\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${LINUX_ALPHA_TRUE}" && test -z "${LINUX_ALPHA_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"LINUX_ALPHA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"LINUX_ALPHA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"LINUX_ALPHA\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${LNXACPI_TRUE}" && test -z "${LNXACPI_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"LNXACPI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"LNXACPI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"LNXACPI\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SOLARIS_USL_CONSOLE_TRUE}" && test -z "${SOLARIS_USL_CONSOLE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"SOLARIS_USL_CONSOLE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"SOLARIS_USL_CONSOLE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"SOLARIS_USL_CONSOLE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SOLARIS_ASM_INLINE_TRUE}" && test -z "${SOLARIS_ASM_INLINE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"SOLARIS_ASM_INLINE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"SOLARIS_ASM_INLINE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"SOLARIS_ASM_INLINE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DGA_TRUE}" && test -z "${DGA_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DGA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DGA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DGA\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XF86VIDMODE_TRUE}" && test -z "${XF86VIDMODE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XF86VIDMODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XF86VIDMODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XF86VIDMODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_TRUE}" && test -z "${XWIN_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_MULTIWINDOW_TRUE}" && test -z "${XWIN_MULTIWINDOW_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN_MULTIWINDOW\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN_MULTIWINDOW\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN_MULTIWINDOW\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_MULTIWINDOWEXTWM_TRUE}" && test -z "${XWIN_MULTIWINDOWEXTWM_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN_MULTIWINDOWEXTWM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN_MULTIWINDOWEXTWM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN_MULTIWINDOWEXTWM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_CLIPBOARD_TRUE}" && test -z "${XWIN_CLIPBOARD_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN_CLIPBOARD\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN_CLIPBOARD\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN_CLIPBOARD\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_GLX_WINDOWS_TRUE}" && test -z "${XWIN_GLX_WINDOWS_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN_GLX_WINDOWS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN_GLX_WINDOWS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN_GLX_WINDOWS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_NATIVEGDI_TRUE}" && test -z "${XWIN_NATIVEGDI_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN_NATIVEGDI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN_NATIVEGDI\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN_NATIVEGDI\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_PRIMARYFB_TRUE}" && test -z "${XWIN_PRIMARYFB_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN_PRIMARYFB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN_PRIMARYFB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN_PRIMARYFB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_RANDR_TRUE}" && test -z "${XWIN_RANDR_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN_RANDR\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN_RANDR\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN_RANDR\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XWIN_XV_TRUE}" && test -z "${XWIN_XV_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XWIN_XV\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XWIN_XV\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XWIN_XV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepOBJC_TRUE}" && test -z "${am__fastdepOBJC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepOBJC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepOBJC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"am__fastdepOBJC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_XPLUGIN_TRUE}" && test -z "${HAVE_XPLUGIN_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_XPLUGIN\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"HAVE_XPLUGIN\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"HAVE_XPLUGIN\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_AGL_FRAMEWORK_TRUE}" && test -z "${HAVE_AGL_FRAMEWORK_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_AGL_FRAMEWORK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"HAVE_AGL_FRAMEWORK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"HAVE_AGL_FRAMEWORK\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XQUARTZ_TRUE}" && test -z "${XQUARTZ_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XQUARTZ\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XQUARTZ\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XQUARTZ\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${STANDALONE_XPBPROXY_TRUE}" && test -z "${STANDALONE_XPBPROXY_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"STANDALONE_XPBPROXY\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"STANDALONE_XPBPROXY\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"STANDALONE_XPBPROXY\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DMX_TRUE}" && test -z "${DMX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DMX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DMX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DMX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DMX_BUILD_LNX_TRUE}" && test -z "${DMX_BUILD_LNX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DMX_BUILD_LNX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DMX_BUILD_LNX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DMX_BUILD_LNX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${DMX_BUILD_USB_TRUE}" && test -z "${DMX_BUILD_USB_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"DMX_BUILD_USB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"DMX_BUILD_USB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"DMX_BUILD_USB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${KDRIVE_TRUE}" && test -z "${KDRIVE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"KDRIVE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"KDRIVE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"KDRIVE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${KDRIVELINUX_TRUE}" && test -z "${KDRIVELINUX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"KDRIVELINUX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"KDRIVELINUX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"KDRIVELINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${TSLIB_TRUE}" && test -z "${TSLIB_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"TSLIB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"TSLIB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"TSLIB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${KDRIVEVESA_TRUE}" && test -z "${KDRIVEVESA_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"KDRIVEVESA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"KDRIVEVESA\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"KDRIVEVESA\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${KDRIVEFBDEV_TRUE}" && test -z "${KDRIVEFBDEV_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"KDRIVEFBDEV\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"KDRIVEFBDEV\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"KDRIVEFBDEV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XSDLSERVER_TRUE}" && test -z "${XSDLSERVER_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XSDLSERVER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XSDLSERVER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XSDLSERVER\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XEPHYR_TRUE}" && test -z "${XEPHYR_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XEPHYR\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XEPHYR\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XEPHYR\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${BUILD_KDRIVEFBDEVLIB_TRUE}" && test -z "${BUILD_KDRIVEFBDEVLIB_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_KDRIVEFBDEVLIB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"BUILD_KDRIVEFBDEVLIB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"BUILD_KDRIVEFBDEVLIB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${XFAKESERVER_TRUE}" && test -z "${XFAKESERVER_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"XFAKESERVER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"XFAKESERVER\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"XFAKESERVER\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
 : ${CONFIG_STATUS=./config.status}
 ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -30448,17 +21758,18 @@ cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 debug=false
 ac_cs_recheck=false
 ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
 
 # Be more Bourne compatible
 DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
   # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -30466,23 +21777,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
 esac
-
 fi
 
 
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
 as_nl='
 '
 export as_nl
@@ -30490,7 +21793,13 @@ export as_nl
 as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
   as_echo='printf %s\n'
   as_echo_n='printf %s'
 else
@@ -30501,7 +21810,7 @@ else
     as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
     as_echo_n_body='eval
       arg=$1;
-      case $arg in
+      case $arg in #(
       *"$as_nl"*)
 	expr "X$arg" : "X\\(.*\\)$as_nl";
 	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -30524,13 +21833,6 @@ if test "${PATH_SEPARATOR+set}" != set; then
   }
 fi
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
 
 # IFS
 # We need space, tab and new line, in precisely that order.  Quoting is
@@ -30540,15 +21842,15 @@ fi
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
 IFS=$as_save_IFS
 
      ;;
@@ -30560,12 +21862,16 @@ if test "x$as_myself" = x; then
 fi
 if test ! -f "$as_myself"; then
   $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
+  exit 1
 fi
 
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
 done
 PS1='$ '
 PS2='> '
@@ -30577,7 +21883,89 @@ export LC_ALL
 LANGUAGE=C
 export LANGUAGE
 
-# Required to use basename.
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -30591,8 +21979,12 @@ else
   as_basename=false
 fi
 
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-# Name of the executable.
 as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
@@ -30612,76 +22004,25 @@ $as_echo X/"$0" |
 	  }
 	  s/.*/./; q'`
 
-# CDPATH.
-$as_unset CDPATH
-
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
 
 ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
 -n*)
-  case `echo 'x\c'` in
+  case `echo 'xy\c'` in
   *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
   esac;;
 *)
   ECHO_N='-n';;
 esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
 
 rm -f conf$$ conf$$.exe conf$$.file
 if test -d conf$$.dir; then
@@ -30710,8 +22051,56 @@ fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
 
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
@@ -30730,10 +22119,10 @@ else
       if test -d "$1"; then
 	test -d "$1/.";
       else
-	case $1 in
+	case $1 in #(
 	-*)set "./$1";;
 	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
 	???[sx]*):;;*)false;;esac;fi
     '\'' sh
   '
@@ -30748,13 +22137,19 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
 exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
 
-# Save the log message, to keep $[0] and so on meaningful, and to
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by xorg-server $as_me 1.6.2, which was
-generated by GNU Autoconf 2.63.  Invocation command line was
+This file was extended by xorg-server $as_me 1.6.3.901, which was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -30786,10 +22181,11 @@ _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
 
-Usage: $0 [OPTION]... [FILE]...
+Usage: $0 [OPTION]... [TAG]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number and configuration settings, then exit
@@ -30811,16 +22207,16 @@ $config_headers
 Configuration commands:
 $config_commands
 
-Report bugs to <bug-autoconf@gnu.org>."
+Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>."
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-xorg-server config.status 1.6.2
-configured by $0, generated by GNU Autoconf 2.63,
+xorg-server config.status 1.6.3.901
+configured by $0, generated by GNU Autoconf 2.64,
   with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -30863,20 +22259,19 @@ do
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
-    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
   --header | --heade | --head | --hea )
     $ac_shift
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
-    CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
     ac_need_defaults=false;;
   --he | --h)
     # Conflict between --help and --header
-    { $as_echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; };;
+    as_fn_error "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
   --help | --hel | -h )
     $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
@@ -30884,11 +22279,10 @@ Try \`$0 --help' for more information." >&2
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { $as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; } ;;
+  -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
 
-  *) ac_config_targets="$ac_config_targets $1"
+  *) as_fn_append ac_config_targets " $1"
      ac_need_defaults=false ;;
 
   esac
@@ -31294,9 +22688,7 @@ do
     "hw/kdrive/src/Makefile") CONFIG_FILES="$CONFIG_FILES hw/kdrive/src/Makefile" ;;
     "xorg-server.pc") CONFIG_FILES="$CONFIG_FILES xorg-server.pc" ;;
 
-  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
+  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
@@ -31323,7 +22715,7 @@ $debug ||
   trap 'exit_status=$?
   { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
 ' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
+  trap 'as_fn_exit 1' 1 2 13 15
 }
 # Create a (secure) tmp directory for tmp files.
 
@@ -31334,11 +22726,7 @@ $debug ||
 {
   tmp=./conf$$-$RANDOM
   (umask 077 && mkdir "$tmp")
-} ||
-{
-   $as_echo "$as_me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
@@ -31346,10 +22734,16 @@ $debug ||
 if test -n "$CONFIG_FILES"; then
 
 
-ac_cr='
'
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
 ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
 if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
+  ac_cs_awk_cr='\r'
 else
   ac_cs_awk_cr=$ac_cr
 fi
@@ -31363,24 +22757,18 @@ _ACEOF
   echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
   echo "_ACEOF"
 } >conf$$subs.sh ||
-  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
 ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   . ./conf$$subs.sh ||
-    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
 
   ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
   if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -31469,9 +22857,7 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
 else
   cat
 fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
-   { (exit 1); exit 1; }; }
+  || as_fn_error "could not setup config files machinery" "$LINENO" 5
 _ACEOF
 
 # VPATH may cause trouble with some makes, so we remove $(srcdir),
@@ -31512,9 +22898,7 @@ for ac_last_try in false false :; do
   if test -z "$ac_t"; then
     break
   elif $ac_last_try; then
-    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -31599,9 +22983,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACAWK
 _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
-$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "could not setup config headers machinery" "$LINENO" 5
 fi # test -n "$CONFIG_HEADERS"
 
 
@@ -31614,9 +22996,7 @@ do
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
-   { (exit 1); exit 1; }; };;
+  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -31644,12 +23024,10 @@ $as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-   { (exit 1); exit 1; }; };;
+	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      ac_file_inputs="$ac_file_inputs '$ac_f'"
+      as_fn_append ac_file_inputs " '$ac_f'"
     done
 
     # Let's still pretend it is `configure' which instantiates (i.e., don't
@@ -31660,7 +23038,7 @@ $as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
 	`' by configure.'
     if test x"$ac_file" != x-; then
       configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
 $as_echo "$as_me: creating $ac_file" >&6;}
     fi
     # Neutralize special characters interpreted by sed in replacement strings.
@@ -31673,9 +23051,7 @@ $as_echo "$as_me: creating $ac_file" >&6;}
 
     case $ac_tag in
     *:-:* | *:-) cat >"$tmp/stdin" \
-      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; } ;;
+      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
     esac
     ;;
   esac
@@ -31703,47 +23079,7 @@ $as_echo X"$ac_file" |
 	    q
 	  }
 	  s/.*/./; q'`
-  { as_dir="$ac_dir"
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
+  as_dir="$ac_dir"; as_fn_mkdir_p
   ac_builddir=.
 
 case "$ac_dir" in
@@ -31800,7 +23136,6 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # If the template does not know about datarootdir, expand it.
 # FIXME: This hack should be removed a few years after 2.60.
 ac_datarootdir_hack=; ac_datarootdir_seen=
-
 ac_sed_dataroot='
 /datarootdir/ {
   p
@@ -31810,12 +23145,11 @@ ac_sed_dataroot='
 /@docdir@/p
 /@infodir@/p
 /@localedir@/p
-/@mandir@/p
-'
+/@mandir@/p'
 case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 *datarootdir*) ac_datarootdir_seen=yes;;
 *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
@@ -31825,7 +23159,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
   s&@infodir@&$infodir&g
   s&@localedir@&$localedir&g
   s&@mandir@&$mandir&g
-    s&\\\${datarootdir}&$datarootdir&g' ;;
+  s&\\\${datarootdir}&$datarootdir&g' ;;
 esac
 _ACEOF
 
@@ -31854,14 +23188,12 @@ s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
 "
 eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&5
 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&2;}
@@ -31871,9 +23203,7 @@ which seems to be undefined.  Please make sure it is defined." >&2;}
   -) cat "$tmp/out" && rm -f "$tmp/out";;
   *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
   esac \
-  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
  ;;
   :H)
   #
@@ -31884,25 +23214,19 @@ $as_echo "$as_me: error: could not create $ac_file" >&2;}
       $as_echo "/* $configure_input  */" \
       && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
     } >"$tmp/config.h" \
-      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
+      || as_fn_error "could not create $ac_file" "$LINENO" 5
     if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
-      { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
 $as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
       rm -f "$ac_file"
       mv "$tmp/config.h" "$ac_file" \
-	|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
+	|| as_fn_error "could not create $ac_file" "$LINENO" 5
     fi
   else
     $as_echo "/* $configure_input  */" \
       && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
-      || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
-$as_echo "$as_me: error: could not create -" >&2;}
-   { (exit 1); exit 1; }; }
+      || as_fn_error "could not create -" "$LINENO" 5
   fi
 # Compute "$ac_file"'s index in $config_headers.
 _am_arg="$ac_file"
@@ -31940,34 +23264,35 @@ $as_echo X"$_am_arg" |
 	  s/.*/./; q'`/stamp-h$_am_stamp_count
  ;;
 
-  :C)  { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
 $as_echo "$as_me: executing $ac_file commands" >&6;}
  ;;
   esac
 
 
   case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files
-# are listed without --file.  Let's play safe and only enable the eval
-# if we detect the quoting.
-case $CONFIG_FILES in
-*\'*) eval set x "$CONFIG_FILES" ;;
-*)   set x $CONFIG_FILES ;;
-esac
-shift
-for mf
-do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-    dirpart=`$as_dirname -- "$mf" ||
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
@@ -31990,28 +23315,28 @@ $as_echo X"$mf" |
 	    q
 	  }
 	  s/.*/./; q'`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`$as_dirname -- "$file" ||
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
@@ -32034,51 +23359,12 @@ $as_echo X"$file" |
 	    q
 	  }
 	  s/.*/./; q'`
-    { as_dir=$dirpart/$fdir
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
     done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
   done
-done
+}
  ;;
     "libtool":C)
 
@@ -32726,15 +24012,12 @@ _LT_EOF
 done # for ac_tag
 
 
-{ (exit 0); exit 0; }
+as_fn_exit 0
 _ACEOF
-chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
 test $ac_write_fail = 0 ||
-  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
 
 
 # configure is writing to config.log, and then calls config.status.
@@ -32755,10 +24038,10 @@ if test "$no_create" != yes; then
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
+  $ac_cs_success || as_fn_exit $?
 fi
 if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
 fi
 
diff --git a/xorg-server/configure.ac b/xorg-server/configure.ac
index 71cc30c5f..9bb566c99 100644
--- a/xorg-server/configure.ac
+++ b/xorg-server/configure.ac
@@ -26,12 +26,12 @@ dnl
 dnl Process this file with autoconf to create configure.
 
 AC_PREREQ(2.57)
-AC_INIT([xorg-server], 1.6.2, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], xorg-server)
+AC_INIT([xorg-server], 1.6.3.901, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], xorg-server)
 AC_CONFIG_SRCDIR([Makefile.am])
 AM_INIT_AUTOMAKE([dist-bzip2 foreign])
 AM_MAINTAINER_MODE
 
-RELEASE_DATE="2009-7-7"
+RELEASE_DATE="2009-8-25"
 
 dnl this gets generated by autoheader, and thus contains all the defines.  we
 dnl don't ever actually use it, internally.
@@ -870,7 +870,7 @@ case "$DRI2,$HAVE_DRI2PROTO" in
 		DRI2=yes
 		;;
 esac
-AM_CONDITIONAL(DRI2, test "x$DRI2" == xyes)
+AM_CONDITIONAL(DRI2, test "x$DRI2" = xyes)
 
 if test "x$DRI" = xyes || test "x$DRI2" = xyes; then
 	PKG_CHECK_MODULES([LIBDRM], [libdrm >= 2.3.0])
@@ -880,7 +880,7 @@ fi
 
 if test "x$DRI2" = xyes; then
 	save_CFLAGS=$CFLAGS
-	CFLAGS="$GL_CFLAGS $LIBDRM_CFLAGS -Wall"
+	CFLAGS="$GL_CFLAGS $LIBDRM_CFLAGS"
 	AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#include <GL/gl.h>
 #include <GL/internal/dri_interface.h>
 #ifndef __DRI_DRI2
@@ -897,14 +897,14 @@ if test "x$DRI2" = xyes; then
 		DRI2_AIGLX=no
 	fi
 fi
-AM_CONDITIONAL(DRI2_AIGLX, test "x$DRI2_AIGLX" == xyes)
+AM_CONDITIONAL(DRI2_AIGLX, test "x$DRI2_AIGLX" = xyes)
 
 
 AM_CONDITIONAL(XINERAMA, [test "x$XINERAMA" = xyes])
 if test "x$XINERAMA" = xyes; then
 	AC_DEFINE(XINERAMA, 1, [Support Xinerama extension])
 	AC_DEFINE(PANORAMIX, 1, [Internal define for Xinerama])
-	REQUIRED_MODULES="$REQUIRED_MODULES xineramaproto xinerama"
+	REQUIRED_MODULES="$REQUIRED_MODULES xineramaproto"
 fi
 
 AM_CONDITIONAL(XACE, [test "x$XACE" = xyes])
@@ -1239,7 +1239,7 @@ if test "x$XORG" = xyes; then
 	XORG_OSINCS='-I$(top_srcdir)/hw/xfree86/os-support -I$(top_srcdir)/hw/xfree86/os-support/bus -I$(top_srcdir)/os'
 	XORG_INCS="$XORG_DDXINCS $XORG_OSINCS"
 	XORG_CFLAGS="$XORGSERVER_CFLAGS -DHAVE_XORG_CONFIG_H"
-	XORG_LIBS="$COMPOSITE_LIB $FIXES_LIB $XEXTXORG_LIB $GLX_LIBS $RANDR_LIB $RENDER_LIB $DAMAGE_LIB $MIEXT_DAMAGE_LIB $MIEXT_SHADOW_LIB $XI_LIB $XKB_LIB $SELINUX_LIB"
+	XORG_LIBS="$COMPOSITE_LIB $FIXES_LIB $XEXTXORG_LIB $GLX_LIBS $RANDR_LIB $RENDER_LIB $DAMAGE_LIB $MIEXT_DAMAGE_LIB $MIEXT_SHADOW_LIB $XI_LIB $XKB_LIB"
 
 	PKG_CHECK_MODULES([PCIACCESS], [pciaccess >= 0.8.0])
 	SAVE_LIBS=$LIBS
@@ -1250,7 +1250,7 @@ if test "x$XORG" = xyes; then
 	AC_CHECK_FUNCS([pci_device_enable])
 	LIBS=$SAVE_LIBS
 	CFLAGS=$SAVE_CFLAGS
-	XORG_SYS_LIBS="$XORG_SYS_LIBS $PCIACCESS_LIBS $DLOPEN_LIBS $GLX_SYS_LIBS"
+	XORG_SYS_LIBS="$XORG_SYS_LIBS $PCIACCESS_LIBS $DLOPEN_LIBS $GLX_SYS_LIBS $SELINUX_LIB"
 	XORG_CFLAGS="$XORG_CFLAGS $PCIACCESS_CFLAGS"
 
 	case $host_os in
diff --git a/xorg-server/damageext/Makefile.in b/xorg-server/damageext/Makefile.in
index 626696d1f..53a56b7d0 100644
--- a/xorg-server/damageext/Makefile.in
+++ b/xorg-server/damageext/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libdamageext_la_LIBADD =
 am_libdamageext_la_OBJECTS = damageext.lo
@@ -55,6 +58,7 @@ libdamageext_la_OBJECTS = $(am_libdamageext_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -197,6 +201,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -363,9 +368,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  damageext/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  damageext/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign damageext/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign damageext/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -383,6 +388,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -405,21 +411,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -442,7 +448,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -450,29 +456,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -493,13 +504,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -527,6 +542,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -548,6 +564,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -556,18 +574,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -605,6 +633,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/dbe/Makefile.in b/xorg-server/dbe/Makefile.in
index 558bf7785..bc5c556da 100644
--- a/xorg-server/dbe/Makefile.in
+++ b/xorg-server/dbe/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libdbe_la_LIBADD =
 am_libdbe_la_OBJECTS = dbe.lo midbe.lo
@@ -57,6 +60,7 @@ libdbe_la_OBJECTS = $(am_libdbe_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -71,9 +75,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -209,6 +227,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -377,9 +396,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  dbe/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  dbe/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dbe/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dbe/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -397,6 +416,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -420,21 +440,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -447,20 +467,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -474,7 +497,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -482,29 +505,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -525,13 +553,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -562,6 +594,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -583,6 +616,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -591,18 +626,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -641,6 +686,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/depcomp b/xorg-server/depcomp
index e5f9736c7..df8eea7e4 100644
--- a/xorg-server/depcomp
+++ b/xorg-server/depcomp
@@ -1,10 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2007-03-29.01
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@ scriptversion=2007-03-29.01
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -87,6 +85,15 @@ if test "$depmode" = dashXmstdout; then
    depmode=dashmstdout
 fi
 
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -192,14 +199,14 @@ sgi)
 ' < "$tmpdepfile" \
     | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
     tr '
-' ' ' >> $depfile
-    echo >> $depfile
+' ' ' >> "$depfile"
+    echo >> "$depfile"
 
     # The second pass generates a dummy entry for each header file.
     tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+   >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -328,7 +335,12 @@ hp2)
   if test -f "$tmpdepfile"; then
     sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
   else
     echo "#dummy" > "$depfile"
   fi
@@ -404,7 +416,7 @@ dashmstdout)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -455,32 +467,39 @@ makedepend)
   "$@" || exit $?
   # Remove any Libtool call
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
   # X makedepend
   shift
-  cleared=no
-  for arg in "$@"; do
+  cleared=no eat=no
+  for arg
+  do
     case $cleared in
     no)
       set ""; shift
       cleared=yes ;;
     esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
     # Strip any option that makedepend may not understand.  Remove
     # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
     -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
     esac
   done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
@@ -500,7 +519,7 @@ cpp)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -538,13 +557,27 @@ cpp)
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
+  # always write the preprocessed file to stdout.
   "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
   IFS=" "
   for arg
   do
     case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 	set fnord "$@"
 	shift
@@ -557,16 +590,23 @@ msvisualcpp)
 	;;
     esac
   done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
   echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -585,5 +625,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/xorg-server/dix/Makefile.in b/xorg-server/dix/Makefile.in
index 28de940f1..3d10eb3c0 100644
--- a/xorg-server/dix/Makefile.in
+++ b/xorg-server/dix/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,8 +19,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -52,6 +54,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libdix_la_LIBADD =
 am_libdix_la_OBJECTS = atom.lo colormap.lo cursor.lo deprecated.lo \
@@ -68,6 +71,7 @@ dix_O_LDADD = $(LDADD)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -81,9 +85,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(miscconfigdir)"
-dist_miscconfigDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_miscconfig_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -219,6 +237,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -427,9 +446,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  dix/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  dix/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dix/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dix/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -447,6 +466,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -460,11 +480,13 @@ libdix.la: $(libdix_la_OBJECTS) $(libdix_la_DEPENDENCIES)
 	$(LINK)  $(libdix_la_OBJECTS) $(libdix_la_LIBADD) $(LIBS)
 
 clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 @XSERVER_DTRACE_FALSE@dix.O$(EXEEXT): $(dix_O_OBJECTS) $(dix_O_DEPENDENCIES) 
 @XSERVER_DTRACE_FALSE@	@rm -f dix.O$(EXEEXT)
 @XSERVER_DTRACE_FALSE@	$(LINK) $(dix_O_OBJECTS) $(dix_O_LDADD) $(LIBS)
@@ -509,21 +531,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -536,20 +558,23 @@ clean-libtool:
 install-dist_miscconfigDATA: $(dist_miscconfig_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(miscconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(miscconfigdir)"
-	@list='$(dist_miscconfig_DATA)'; for p in $$list; do \
+	@list='$(dist_miscconfig_DATA)'; test -n "$(miscconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(dist_miscconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(miscconfigdir)/$$f'"; \
-	  $(dist_miscconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(miscconfigdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(miscconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(miscconfigdir)" || exit $$?; \
 	done
 
 uninstall-dist_miscconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(dist_miscconfig_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(miscconfigdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(miscconfigdir)/$$f"; \
-	done
+	@list='$(dist_miscconfig_DATA)'; test -n "$(miscconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(miscconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(miscconfigdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -563,7 +588,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -571,29 +596,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -614,13 +644,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -654,6 +688,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -676,6 +711,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -684,18 +721,28 @@ install-data-am: install-dist_miscconfigDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -718,7 +765,7 @@ ps-am:
 
 uninstall-am: uninstall-dist_miscconfigDATA
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
@@ -749,6 +796,7 @@ uninstall-am: uninstall-dist_miscconfigDATA
 
 dix.c:
 	touch $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/dix/cursor.c b/xorg-server/dix/cursor.c
index 81540fd89..0017c661d 100644
--- a/xorg-server/dix/cursor.c
+++ b/xorg-server/dix/cursor.c
@@ -298,15 +298,15 @@ AllocGlyphCursor(Font source, unsigned sourceChar, Font mask, unsigned maskChar,
     GlyphSharePtr pShare;
     DeviceIntPtr pDev;
 
-    rc = dixLookupResource((pointer *)&sourcefont, source, RT_FONT, client,
-			   DixUseAccess);
+    rc = dixLookupResourceByType((pointer *)&sourcefont, source, RT_FONT, client,
+				 DixUseAccess);
     if (rc != Success)
     {
 	client->errorValue = source;
 	return (rc == BadValue) ? BadFont : rc;
     }
-    rc = dixLookupResource((pointer *)&maskfont, mask, RT_FONT, client,
-			   DixUseAccess);
+    rc = dixLookupResourceByType((pointer *)&maskfont, mask, RT_FONT, client,
+				 DixUseAccess);
     if (rc != Success && mask != None)
     {
 	client->errorValue = mask;
diff --git a/xorg-server/dix/deprecated.c b/xorg-server/dix/deprecated.c
index 2bb81190c..4e20d6082 100644
--- a/xorg-server/dix/deprecated.c
+++ b/xorg-server/dix/deprecated.c
@@ -115,48 +115,66 @@ LookupClient(XID id, ClientPtr client)
     return (i == Success) ? pClient : NULL;
 }
 
-/* replaced by dixLookupResource */
+/* replaced by dixLookupResourceByType */
 _X_EXPORT pointer
 SecurityLookupIDByType(ClientPtr client, XID id, RESTYPE rtype,
 		       Mask access_mode)
 {
     pointer retval;
-    int i = dixLookupResource(&retval, id, rtype, client, access_mode);
+    int i = dixLookupResourceByType(&retval, id, rtype, client, access_mode);
     static int warn = 1;
     if (warn > 0 && --warn)
 	ErrorF("Warning: LookupIDByType()/SecurityLookupIDByType() "
 	       "are deprecated.  Please convert your driver/module "
-	       "to use dixLookupResource().\n");
+	       "to use dixLookupResourceByType().\n");
     return (i == Success) ? retval : NULL;
 }
 
-/* replaced by dixLookupResource */
+/* replaced by dixLookupResourceByClass */
 _X_EXPORT pointer
 SecurityLookupIDByClass(ClientPtr client, XID id, RESTYPE classes,
 			Mask access_mode)
 {
     pointer retval;
-    int i = dixLookupResource(&retval, id, classes, client, access_mode);
+    int i = dixLookupResourceByClass(&retval, id, classes, client, access_mode);
     static int warn = 1;
     if (warn > 0 && --warn)
 	ErrorF("Warning: LookupIDByClass()/SecurityLookupIDByClass() "
 	       "are deprecated.  Please convert your driver/module "
-	       "to use dixLookupResource().\n");
+	       "to use dixLookupResourceByClass().\n");
     return (i == Success) ? retval : NULL;
 }
 
-/* replaced by dixLookupResource */
+/* replaced by dixLookupResourceByType */
 _X_EXPORT pointer
 LookupIDByType(XID id, RESTYPE rtype)
 {
     return SecurityLookupIDByType(NullClient, id, rtype, DixUnknownAccess);
 }
 
-/* replaced by dixLookupResource */
+/* replaced by dixLookupResourceByClass */
 _X_EXPORT pointer
 LookupIDByClass(XID id, RESTYPE classes)
 {
     return SecurityLookupIDByClass(NullClient, id, classes, DixUnknownAccess);
 }
 
+/* replaced by dixLookupResourceBy{Type,Class} */
+_X_EXPORT int
+dixLookupResource (pointer *result, XID id, RESTYPE rtype,
+		   ClientPtr client, Mask mode)
+{
+    Bool istype = ((rtype & TypeMask) && (rtype != RC_ANY)) || (rtype == RT_NONE);
+
+    static int warn = 1;
+    if (warn > 0 && --warn)
+	ErrorF("Warning: dixLookupResource() "
+	       "is deprecated.  Please convert your driver/module "
+	       "to use dixLookupResourceByType/dixLookupResourceByClass().\n");
+    if (istype)
+	return dixLookupResourceByType (result, id, rtype, client, mode);
+    else
+	return dixLookupResourceByClass (result, id, rtype, client, mode);
+}
+
 /* end deprecated functions */
diff --git a/xorg-server/dix/dispatch.c b/xorg-server/dix/dispatch.c
index 2f8b3d69c..b4f5f437f 100644
--- a/xorg-server/dix/dispatch.c
+++ b/xorg-server/dix/dispatch.c
@@ -251,6 +251,7 @@ long	    SmartScheduleSlice = SMART_SCHEDULE_DEFAULT_INTERVAL;
 long	    SmartScheduleInterval = SMART_SCHEDULE_DEFAULT_INTERVAL;
 long	    SmartScheduleMaxSlice = SMART_SCHEDULE_MAX_SLICE;
 long	    SmartScheduleTime;
+int	    SmartScheduleLatencyLimited = 0;
 static ClientPtr   SmartLastClient;
 static int	   SmartLastIndex[SMART_MAX_PRIORITY-SMART_MIN_PRIORITY+1];
 
@@ -321,7 +322,7 @@ SmartScheduleClient (int *clientReady, int nready)
     /*
      * Adjust slice
      */
-    if (nready == 1)
+    if (nready == 1 && SmartScheduleLatencyLimited == 0)
     {
 	/*
 	 * If it's been a long time since another client
@@ -341,6 +342,23 @@ SmartScheduleClient (int *clientReady, int nready)
     return best;
 }
 
+void
+EnableLimitedSchedulingLatency(void)
+{
+    ++SmartScheduleLatencyLimited;
+    SmartScheduleSlice = SmartScheduleInterval;
+}
+
+void
+DisableLimitedSchedulingLatency(void)
+{
+    --SmartScheduleLatencyLimited;
+
+    /* protect against bugs */
+    if (SmartScheduleLatencyLimited < 0)
+	SmartScheduleLatencyLimited = 0;
+}
+
 #define MAJOROP ((xReq *)client->requestBuffer)->reqType
 
 void
@@ -360,6 +378,7 @@ Dispatch(void)
     if (!clientReady)
 	return;
 
+    SmartScheduleSlice = SmartScheduleInterval;
     while (!dispatchException)
     {
         if (*icheck[0] != *icheck[1])
@@ -470,6 +489,7 @@ Dispatch(void)
     KillAllClients();
     xfree(clientReady);
     dispatchException &= ~DE_RESET;
+    SmartScheduleLatencyLimited = 0;
 }
 
 #undef MAJOROP
@@ -1123,11 +1143,11 @@ ProcQueryFont(ClientPtr client)
     REQUEST_SIZE_MATCH(xResourceReq);
 
     client->errorValue = stuff->id;		/* EITHER font or gc */
-    rc = dixLookupResource((pointer *)&pFont, stuff->id, RT_FONT, client,
-			   DixGetAttrAccess);
+    rc = dixLookupResourceByType((pointer *)&pFont, stuff->id, RT_FONT, client,
+				 DixGetAttrAccess);
     if (rc == BadValue) {
-	rc = dixLookupResource((pointer *)&pGC, stuff->id, RT_GC, client,
-			       DixGetAttrAccess);
+	rc = dixLookupResourceByType((pointer *)&pGC, stuff->id, RT_GC, client,
+				     DixGetAttrAccess);
 	if (rc == Success)
 	    pFont = pGC->font;
     }
@@ -1181,10 +1201,10 @@ ProcQueryTextExtents(ClientPtr client)
     REQUEST_AT_LEAST_SIZE(xQueryTextExtentsReq);
         
     client->errorValue = stuff->fid;		/* EITHER font or gc */
-    rc = dixLookupResource((pointer *)&pFont, stuff->fid, RT_FONT, client,
-			   DixGetAttrAccess);
+    rc = dixLookupResourceByType((pointer *)&pFont, stuff->fid, RT_FONT, client,
+				 DixGetAttrAccess);
     if (rc == BadValue) {
-	rc = dixLookupResource((pointer *)&pGC, stuff->fid, RT_GC, client,
+	rc = dixLookupResourceByType((pointer *)&pGC, stuff->fid, RT_GC, client,
 			       DixGetAttrAccess);
 	if (rc == Success)
 	    pFont = pGC->font;
@@ -1329,7 +1349,7 @@ ProcFreePixmap(ClientPtr client)
     REQUEST(xResourceReq);
     REQUEST_SIZE_MATCH(xResourceReq);
 
-    rc = dixLookupResource((pointer *)&pMap, stuff->id, RT_PIXMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pMap, stuff->id, RT_PIXMAP, client,
 			   DixDestroyAccess);
     if (rc == Success)
     {
@@ -2275,7 +2295,7 @@ ProcFreeColormap(ClientPtr client)
     REQUEST(xResourceReq);
 
     REQUEST_SIZE_MATCH(xResourceReq);
-    rc = dixLookupResource((pointer *)&pmap, stuff->id, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pmap, stuff->id, RT_COLORMAP, client,
 			   DixDestroyAccess);
     if (rc == Success)
     {
@@ -2303,7 +2323,7 @@ ProcCopyColormapAndFree(ClientPtr client)
     REQUEST_SIZE_MATCH(xCopyColormapAndFreeReq);
     mid = stuff->mid;
     LEGAL_NEW_RESOURCE(mid, client);
-    rc = dixLookupResource((pointer *)&pSrcMap, stuff->srcCmap, RT_COLORMAP,
+    rc = dixLookupResourceByType((pointer *)&pSrcMap, stuff->srcCmap, RT_COLORMAP,
 			   client, DixReadAccess|DixRemoveAccess);
     if (rc == Success)
     {
@@ -2328,7 +2348,7 @@ ProcInstallColormap(ClientPtr client)
     REQUEST(xResourceReq);
     REQUEST_SIZE_MATCH(xResourceReq);
 
-    rc = dixLookupResource((pointer *)&pcmp, stuff->id, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->id, RT_COLORMAP, client,
 			   DixInstallAccess);
     if (rc != Success)
 	goto out;
@@ -2353,7 +2373,7 @@ ProcUninstallColormap(ClientPtr client)
     REQUEST(xResourceReq);
     REQUEST_SIZE_MATCH(xResourceReq);
 
-    rc = dixLookupResource((pointer *)&pcmp, stuff->id, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->id, RT_COLORMAP, client,
 			   DixUninstallAccess);
     if (rc != Success)
 	goto out;
@@ -2420,7 +2440,7 @@ ProcAllocColor (ClientPtr client)
     REQUEST(xAllocColorReq);
 
     REQUEST_SIZE_MATCH(xAllocColorReq);
-    rc = dixLookupResource((pointer *)&pmap, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pmap, stuff->cmap, RT_COLORMAP, client,
 			   DixAddAccess);
     if (rc == Success)
     {
@@ -2461,7 +2481,7 @@ ProcAllocNamedColor (ClientPtr client)
     REQUEST(xAllocNamedColorReq);
 
     REQUEST_FIXED_SIZE(xAllocNamedColorReq, stuff->nbytes);
-    rc = dixLookupResource((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
 			   DixAddAccess);
     if (rc == Success)
     {
@@ -2512,7 +2532,7 @@ ProcAllocColorCells (ClientPtr client)
     REQUEST(xAllocColorCellsReq);
 
     REQUEST_SIZE_MATCH(xAllocColorCellsReq);
-    rc = dixLookupResource((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
 			   DixAddAccess);
     if (rc == Success)
     {
@@ -2579,7 +2599,7 @@ ProcAllocColorPlanes(ClientPtr client)
     REQUEST(xAllocColorPlanesReq);
 
     REQUEST_SIZE_MATCH(xAllocColorPlanesReq);
-    rc = dixLookupResource((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
 			   DixAddAccess);
     if (rc == Success)
     {
@@ -2644,7 +2664,7 @@ ProcFreeColors(ClientPtr client)
     REQUEST(xFreeColorsReq);
 
     REQUEST_AT_LEAST_SIZE(xFreeColorsReq);
-    rc = dixLookupResource((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
 			   DixRemoveAccess);
     if (rc == Success)
     {
@@ -2679,7 +2699,7 @@ ProcStoreColors (ClientPtr client)
     REQUEST(xStoreColorsReq);
 
     REQUEST_AT_LEAST_SIZE(xStoreColorsReq);
-    rc = dixLookupResource((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
 			   DixWriteAccess);
     if (rc == Success)
     {
@@ -2713,7 +2733,7 @@ ProcStoreNamedColor (ClientPtr client)
     REQUEST(xStoreNamedColorReq);
 
     REQUEST_FIXED_SIZE(xStoreNamedColorReq, stuff->nbytes);
-    rc = dixLookupResource((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
 			   DixWriteAccess);
     if (rc == Success)
     {
@@ -2747,7 +2767,7 @@ ProcQueryColors(ClientPtr client)
     REQUEST(xQueryColorsReq);
 
     REQUEST_AT_LEAST_SIZE(xQueryColorsReq);
-    rc = dixLookupResource((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
 			   DixReadAccess);
     if (rc == Success)
     {
@@ -2799,7 +2819,7 @@ ProcLookupColor(ClientPtr client)
     REQUEST(xLookupColorReq);
 
     REQUEST_FIXED_SIZE(xLookupColorReq, stuff->nbytes);
-    rc = dixLookupResource((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
+    rc = dixLookupResourceByType((pointer *)&pcmp, stuff->cmap, RT_COLORMAP, client,
 			   DixReadAccess);
     if (rc == Success)
     {
@@ -2848,14 +2868,14 @@ ProcCreateCursor (ClientPtr client)
     REQUEST_SIZE_MATCH(xCreateCursorReq);
     LEGAL_NEW_RESOURCE(stuff->cid, client);
 
-    rc = dixLookupResource((pointer *)&src, stuff->source, RT_PIXMAP, client,
+    rc = dixLookupResourceByType((pointer *)&src, stuff->source, RT_PIXMAP, client,
 			   DixReadAccess);
     if (rc != Success) {
 	client->errorValue = stuff->source;
 	return (rc == BadValue) ? BadPixmap : rc;
     }
 
-    rc = dixLookupResource((pointer *)&msk, stuff->mask, RT_PIXMAP, client,
+    rc = dixLookupResourceByType((pointer *)&msk, stuff->mask, RT_PIXMAP, client,
 			   DixReadAccess);
     if (rc != Success)
     {
@@ -2953,7 +2973,7 @@ ProcFreeCursor (ClientPtr client)
     REQUEST(xResourceReq);
 
     REQUEST_SIZE_MATCH(xResourceReq);
-    rc = dixLookupResource((pointer *)&pCursor, stuff->id, RT_CURSOR, client,
+    rc = dixLookupResourceByType((pointer *)&pCursor, stuff->id, RT_CURSOR, client,
 			   DixDestroyAccess);
     if (rc == Success) 
     {
diff --git a/xorg-server/dix/dixutils.c b/xorg-server/dix/dixutils.c
index 340564ecd..66e5bc51b 100644
--- a/xorg-server/dix/dixutils.c
+++ b/xorg-server/dix/dixutils.c
@@ -216,7 +216,7 @@ dixLookupDrawable(DrawablePtr *pDraw, XID id, ClientPtr client,
     if (id == INVALID)
 	return BadDrawable;
 
-    rc = dixLookupResource((pointer *)&pTmp, id, RC_DRAWABLE, client, access);
+    rc = dixLookupResourceByClass((pointer *)&pTmp, id, RC_DRAWABLE, client, access);
 
     if (rc == BadValue)
 	return BadDrawable;
@@ -259,7 +259,7 @@ dixLookupClient(ClientPtr *pClient, XID rid, ClientPtr client, Mask access)
     if (!clientIndex || !clients[clientIndex] || (rid & SERVER_BIT))
 	goto bad;
 
-    rc = dixLookupResource(&pRes, rid, RC_ANY, client, DixGetAttrAccess);
+    rc = dixLookupResourceByClass(&pRes, rid, RC_ANY, client, DixGetAttrAccess);
     if (rc != Success)
 	goto bad;
 
diff --git a/xorg-server/dix/events.c b/xorg-server/dix/events.c
index f15c46090..f9448ba76 100644
--- a/xorg-server/dix/events.c
+++ b/xorg-server/dix/events.c
@@ -1161,7 +1161,7 @@ EnqueueEvent(xEvent *xE, DeviceIntPtr device, int count)
 #ifdef XKB
     /* Fix for key repeating bug. */
     if (device->key != NULL && device->key->xkbInfo != NULL &&
-	xE->u.u.type == KeyRelease)
+	(xE->u.u.type == KeyRelease || xE->u.u.type == DeviceKeyRelease))
 	AccessXCancelRepeatKey(device->key->xkbInfo, xE->u.u.detail);
 #endif
 
@@ -2661,8 +2661,8 @@ WindowsRestructured(void)
     DeviceIntPtr pDev = inputInfo.devices;
     while(pDev)
     {
-        if (DevHasCursor(pDev))
-            CheckMotion((xEvent *)NULL, pDev);
+        if (pDev->isMaster || !pDev->u.master)
+            CheckMotion(NULL, pDev);
         pDev = pDev->next;
     }
 }
@@ -4445,7 +4445,7 @@ ProcGrabPointer(ClientPtr client)
 	cursor = NullCursor;
     else
     {
-	rc = dixLookupResource((pointer *)&cursor, stuff->cursor, RT_CURSOR,
+	rc = dixLookupResourceByType((pointer *)&cursor, stuff->cursor, RT_CURSOR,
 			       client, DixUseAccess);
 	if (rc != Success)
 	{
@@ -4545,8 +4545,8 @@ ProcChangeActivePointerGrab(ClientPtr client)
 	newCursor = NullCursor;
     else
     {
-	int rc = dixLookupResource((pointer *)&newCursor, stuff->cursor,
-				   RT_CURSOR, client, DixUseAccess);
+	int rc = dixLookupResourceByType((pointer *)&newCursor, stuff->cursor,
+					 RT_CURSOR, client, DixUseAccess);
 	if (rc != Success)
 	{
 	    client->errorValue = stuff->cursor;
@@ -5146,7 +5146,7 @@ ProcGrabButton(ClientPtr client)
 	cursor = NullCursor;
     else
     {
-	rc = dixLookupResource((pointer *)&cursor, stuff->cursor, RT_CURSOR,
+	rc = dixLookupResourceByType((pointer *)&cursor, stuff->cursor, RT_CURSOR,
 			       client, DixUseAccess);
 	if (rc != Success)
 	if (!cursor)
@@ -5396,7 +5396,7 @@ ProcRecolorCursor(ClientPtr client)
     REQUEST(xRecolorCursorReq);
 
     REQUEST_SIZE_MATCH(xRecolorCursorReq);
-    rc = dixLookupResource((pointer *)&pCursor, stuff->cursor, RT_CURSOR,
+    rc = dixLookupResourceByType((pointer *)&pCursor, stuff->cursor, RT_CURSOR,
 			   client, DixWriteAccess);
     if (rc != Success)
     {
diff --git a/xorg-server/dix/gc.c b/xorg-server/dix/gc.c
index b9256940d..44bfe8b65 100644
--- a/xorg-server/dix/gc.c
+++ b/xorg-server/dix/gc.c
@@ -273,7 +273,7 @@ dixChangeGC(ClientPtr client, GC *pGC, BITS32 mask, CARD32 *pC32, ChangeGCValPtr
 		else
 		{
 		    NEXTVAL(XID, newpix);
-		    rc = dixLookupResource((pointer *)&pPixmap, newpix,
+		    rc = dixLookupResourceByType((pointer *)&pPixmap, newpix,
 					   RT_PIXMAP, client, DixReadAccess);
 		}
 		if (rc == Success)
@@ -310,7 +310,7 @@ dixChangeGC(ClientPtr client, GC *pGC, BITS32 mask, CARD32 *pC32, ChangeGCValPtr
 		else
 		{
 		    NEXTVAL(XID, newstipple)
-		    rc = dixLookupResource((pointer *)&pPixmap, newstipple,
+		    rc = dixLookupResourceByType((pointer *)&pPixmap, newstipple,
 					   RT_PIXMAP, client, DixReadAccess);
 		}
 		if (rc == Success)
@@ -353,7 +353,7 @@ dixChangeGC(ClientPtr client, GC *pGC, BITS32 mask, CARD32 *pC32, ChangeGCValPtr
 		else
 		{
 		    NEXTVAL(XID, newfont)
-		    rc = dixLookupResource((pointer *)&pFont, newfont,
+		    rc = dixLookupResourceByType((pointer *)&pFont, newfont,
 					   RT_FONT, client, DixUseAccess);
 		}
 		if (rc == Success)
@@ -420,7 +420,7 @@ dixChangeGC(ClientPtr client, GC *pGC, BITS32 mask, CARD32 *pC32, ChangeGCValPtr
 			pPixmap = NullPixmap;
 		    }
 		    else {
-			rc = dixLookupResource((pointer *)&pPixmap, pid,
+			rc = dixLookupResourceByType((pointer *)&pPixmap, pid,
 					       RT_PIXMAP, client,
 					       DixReadAccess);
 			if (rc != Success) {
diff --git a/xorg-server/dix/resource.c b/xorg-server/dix/resource.c
index 7b0441ee9..7b133cae4 100644
--- a/xorg-server/dix/resource.c
+++ b/xorg-server/dix/resource.c
@@ -846,11 +846,10 @@ LegalNewID(XID id, ClientPtr client)
 }
 
 _X_EXPORT int
-dixLookupResource(pointer *result, XID id, RESTYPE rtype,
-		  ClientPtr client, Mask mode)
+dixLookupResourceByType(pointer *result, XID id, RESTYPE rtype,
+			ClientPtr client, Mask mode)
 {
     int cid = CLIENT_ID(id);
-    int istype = (rtype & TypeMask) && (rtype != RC_ANY);
     ResourcePtr res = NULL;
 
     *result = NULL;
@@ -859,8 +858,38 @@ dixLookupResource(pointer *result, XID id, RESTYPE rtype,
 	res = clientTable[cid].resources[Hash(cid, id)];
 
 	for (; res; res = res->next)
-	    if ((res->id == id) && ((istype && res->type == rtype) ||
-				    (!istype && res->type & rtype)))
+	    if (res->id == id && res->type == rtype)
+		break;
+    }
+    if (!res)
+	return BadValue;
+
+    if (client) {
+	client->errorValue = id;
+	cid = XaceHook(XACE_RESOURCE_ACCESS, client, id, res->type,
+		       res->value, RT_NONE, NULL, mode);
+	if (cid != Success)
+	    return cid;
+    }
+
+    *result = res->value;
+    return Success;
+}
+
+_X_EXPORT int
+dixLookupResourceByClass(pointer *result, XID id, RESTYPE rclass,
+			 ClientPtr client, Mask mode)
+{
+    int cid = CLIENT_ID(id);
+    ResourcePtr res = NULL;
+
+    *result = NULL;
+
+    if ((cid < MAXCLIENTS) && clientTable[cid].buckets) {
+	res = clientTable[cid].resources[Hash(cid, id)];
+
+	for (; res; res = res->next)
+	    if (res->id == id && (res->type & rclass))
 		break;
     }
     if (!res)
diff --git a/xorg-server/dix/window.c b/xorg-server/dix/window.c
index 03ef09ac4..7b1af49cb 100644
--- a/xorg-server/dix/window.c
+++ b/xorg-server/dix/window.c
@@ -1068,7 +1068,7 @@ ChangeWindowAttributes(WindowPtr pWin, Mask vmask, XID *vlist, ClientPtr client)
 	    }
 	    else
 	    {	
-		rc = dixLookupResource((pointer *)&pPixmap, pixID, RT_PIXMAP,
+		rc = dixLookupResourceByType((pointer *)&pPixmap, pixID, RT_PIXMAP,
 				       client, DixReadAccess);
 		if (rc == Success)
 		{
@@ -1128,7 +1128,7 @@ ChangeWindowAttributes(WindowPtr pWin, Mask vmask, XID *vlist, ClientPtr client)
 		    pixID = pWin->parent->border.pixmap->drawable.id;
 		}
 	    }
-	    rc = dixLookupResource((pointer *)&pPixmap, pixID, RT_PIXMAP,
+	    rc = dixLookupResourceByType((pointer *)&pPixmap, pixID, RT_PIXMAP,
 				   client, DixReadAccess);
 	    if (rc == Success)
 	    {
@@ -1290,7 +1290,7 @@ ChangeWindowAttributes(WindowPtr pWin, Mask vmask, XID *vlist, ClientPtr client)
 		error = BadMatch;
 		goto PatchUp;
 	    }
-	    rc = dixLookupResource((pointer *)&pCmap, cmap, RT_COLORMAP,
+	    rc = dixLookupResourceByType((pointer *)&pCmap, cmap, RT_COLORMAP,
 				   client, DixUseAccess);
 	    if (rc != Success)
 	    {
@@ -1366,7 +1366,7 @@ ChangeWindowAttributes(WindowPtr pWin, Mask vmask, XID *vlist, ClientPtr client)
 	    }
 	    else
 	    {
-		rc = dixLookupResource((pointer *)&pCursor, cursorID,
+		rc = dixLookupResourceByType((pointer *)&pCursor, cursorID,
 				       RT_CURSOR, client, DixUseAccess);
 		if (rc != Success)
 		{
@@ -3172,8 +3172,6 @@ dixSaveScreens(ClientPtr client, int on, int mode)
 
     if (on == SCREEN_SAVER_FORCER)
     {
-	UpdateCurrentTimeIf();
-	lastDeviceEventTime = currentTime;
 	if (mode == ScreenSaverReset)
 	    what = SCREEN_SAVER_OFF;
 	else
diff --git a/xorg-server/doc/Makefile.in b/xorg-server/doc/Makefile.in
index c26dd3413..69266a417 100644
--- a/xorg-server/doc/Makefile.in
+++ b/xorg-server/doc/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -20,8 +21,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -53,6 +55,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -60,10 +63,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(appmandir)" "$(DESTDIR)$(filemandir)"
-appmanDATA_INSTALL = $(INSTALL_DATA)
-filemanDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(appman_DATA) $(fileman_DATA)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
@@ -197,6 +213,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -412,9 +429,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  doc/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -432,6 +449,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -441,37 +459,43 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 install-filemanDATA: $(fileman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(filemandir)" || $(MKDIR_P) "$(DESTDIR)$(filemandir)"
-	@list='$(fileman_DATA)'; for p in $$list; do \
+	@list='$(fileman_DATA)'; test -n "$(filemandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(filemanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(filemandir)/$$f'"; \
-	  $(filemanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(filemandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(filemandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(filemandir)" || exit $$?; \
 	done
 
 uninstall-filemanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(fileman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(filemandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(filemandir)/$$f"; \
-	done
+	@list='$(fileman_DATA)'; test -n "$(filemandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(filemandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(filemandir)" && rm -f $$files
 tags: TAGS
 TAGS:
 
@@ -495,13 +519,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -535,6 +563,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -554,6 +583,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -562,18 +593,28 @@ install-data-am: install-appmanDATA install-filemanDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -594,7 +635,7 @@ ps-am:
 
 uninstall-am: uninstall-appmanDATA uninstall-filemanDATA
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 	distclean distclean-generic distclean-libtool distdir dvi \
@@ -621,6 +662,7 @@ uninstall-am: uninstall-appmanDATA uninstall-filemanDATA
 
 .man.$(FILE_MAN_SUFFIX):
 	cp $< $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/exa/Makefile.in b/xorg-server/exa/Makefile.in
index 9014a1ed4..3aadbe086 100644
--- a/xorg-server/exa/Makefile.in
+++ b/xorg-server/exa/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libexa_la_LIBADD =
 am_libexa_la_OBJECTS = exa.lo exa_accel.lo exa_glyphs.lo \
@@ -58,6 +61,7 @@ libexa_la_OBJECTS = $(am_libexa_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -72,9 +76,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -210,6 +228,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -390,9 +409,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  exa/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  exa/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign exa/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign exa/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -410,6 +429,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -438,21 +458,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -465,20 +485,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -492,7 +515,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -500,29 +523,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -543,13 +571,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -580,6 +612,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -601,6 +634,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -609,18 +644,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -659,6 +704,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/exa/exa_accel.c b/xorg-server/exa/exa_accel.c
index 6970382b9..9e65d74a1 100644
--- a/xorg-server/exa/exa_accel.c
+++ b/xorg-server/exa/exa_accel.c
@@ -415,6 +415,7 @@ exaCopyNtoN (DrawablePtr    pSrcDrawable,
 
     if (rects) {
 	int i;
+	int ordering;
 
 	for (i = 0; i < nbox; i++) {
 	    rects[i].x = pbox[i].x1 + dx + src_off_x;
@@ -423,7 +424,16 @@ exaCopyNtoN (DrawablePtr    pSrcDrawable,
 	    rects[i].height = pbox[i].y2 - pbox[i].y1;
 	}
 
-	srcregion  = RECTS_TO_REGION(pScreen, nbox, rects, CT_YXBANDED);
+	/* This must match the miRegionCopy() logic for reversing rect order */
+	if (nbox == 1 || (dx > 0 && dy > 0) ||
+	    (pDstDrawable != pSrcDrawable &&
+	     (pDstDrawable->type != DRAWABLE_WINDOW ||
+	      pSrcDrawable->type != DRAWABLE_WINDOW)))
+	    ordering = CT_YXBANDED;
+	else
+	    ordering = CT_UNSORTED;
+
+	srcregion  = RECTS_TO_REGION(pScreen, nbox, rects, ordering);
 	xfree(rects);
 
 	if (!pGC || !exaGCReadsDestination(pDstDrawable, pGC->planemask,
diff --git a/xorg-server/fb/Makefile.in b/xorg-server/fb/Makefile.in
index fff30d09a..9e240a845 100644
--- a/xorg-server/fb/Makefile.in
+++ b/xorg-server/fb/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libfb_la_LIBADD =
 am_libfb_la_OBJECTS = libfb_la-fb24_32.lo libfb_la-fballpriv.lo \
@@ -87,6 +90,7 @@ libwfb_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -101,9 +105,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -239,6 +257,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -447,9 +466,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  fb/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  fb/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign fb/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign fb/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -467,6 +486,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -548,430 +568,430 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 libfb_la-fb24_32.lo: fb24_32.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fb24_32.lo -MD -MP -MF $(DEPDIR)/libfb_la-fb24_32.Tpo -c -o libfb_la-fb24_32.lo `test -f 'fb24_32.c' || echo '$(srcdir)/'`fb24_32.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fb24_32.Tpo $(DEPDIR)/libfb_la-fb24_32.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fb24_32.lo -MD -MP -MF $(DEPDIR)/libfb_la-fb24_32.Tpo -c -o libfb_la-fb24_32.lo `test -f 'fb24_32.c' || echo '$(srcdir)/'`fb24_32.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fb24_32.Tpo $(DEPDIR)/libfb_la-fb24_32.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fb24_32.c' object='libfb_la-fb24_32.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fb24_32.lo `test -f 'fb24_32.c' || echo '$(srcdir)/'`fb24_32.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fb24_32.lo `test -f 'fb24_32.c' || echo '$(srcdir)/'`fb24_32.c
 
 libfb_la-fballpriv.lo: fballpriv.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fballpriv.lo -MD -MP -MF $(DEPDIR)/libfb_la-fballpriv.Tpo -c -o libfb_la-fballpriv.lo `test -f 'fballpriv.c' || echo '$(srcdir)/'`fballpriv.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fballpriv.Tpo $(DEPDIR)/libfb_la-fballpriv.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fballpriv.lo -MD -MP -MF $(DEPDIR)/libfb_la-fballpriv.Tpo -c -o libfb_la-fballpriv.lo `test -f 'fballpriv.c' || echo '$(srcdir)/'`fballpriv.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fballpriv.Tpo $(DEPDIR)/libfb_la-fballpriv.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fballpriv.c' object='libfb_la-fballpriv.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fballpriv.lo `test -f 'fballpriv.c' || echo '$(srcdir)/'`fballpriv.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fballpriv.lo `test -f 'fballpriv.c' || echo '$(srcdir)/'`fballpriv.c
 
 libfb_la-fbarc.lo: fbarc.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbarc.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbarc.Tpo -c -o libfb_la-fbarc.lo `test -f 'fbarc.c' || echo '$(srcdir)/'`fbarc.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbarc.Tpo $(DEPDIR)/libfb_la-fbarc.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbarc.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbarc.Tpo -c -o libfb_la-fbarc.lo `test -f 'fbarc.c' || echo '$(srcdir)/'`fbarc.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbarc.Tpo $(DEPDIR)/libfb_la-fbarc.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbarc.c' object='libfb_la-fbarc.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbarc.lo `test -f 'fbarc.c' || echo '$(srcdir)/'`fbarc.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbarc.lo `test -f 'fbarc.c' || echo '$(srcdir)/'`fbarc.c
 
 libfb_la-fbbits.lo: fbbits.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbbits.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbbits.Tpo -c -o libfb_la-fbbits.lo `test -f 'fbbits.c' || echo '$(srcdir)/'`fbbits.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbbits.Tpo $(DEPDIR)/libfb_la-fbbits.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbbits.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbbits.Tpo -c -o libfb_la-fbbits.lo `test -f 'fbbits.c' || echo '$(srcdir)/'`fbbits.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbbits.Tpo $(DEPDIR)/libfb_la-fbbits.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbbits.c' object='libfb_la-fbbits.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbbits.lo `test -f 'fbbits.c' || echo '$(srcdir)/'`fbbits.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbbits.lo `test -f 'fbbits.c' || echo '$(srcdir)/'`fbbits.c
 
 libfb_la-fbblt.lo: fbblt.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbblt.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbblt.Tpo -c -o libfb_la-fbblt.lo `test -f 'fbblt.c' || echo '$(srcdir)/'`fbblt.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbblt.Tpo $(DEPDIR)/libfb_la-fbblt.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbblt.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbblt.Tpo -c -o libfb_la-fbblt.lo `test -f 'fbblt.c' || echo '$(srcdir)/'`fbblt.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbblt.Tpo $(DEPDIR)/libfb_la-fbblt.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbblt.c' object='libfb_la-fbblt.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbblt.lo `test -f 'fbblt.c' || echo '$(srcdir)/'`fbblt.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbblt.lo `test -f 'fbblt.c' || echo '$(srcdir)/'`fbblt.c
 
 libfb_la-fbbltone.lo: fbbltone.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbbltone.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbbltone.Tpo -c -o libfb_la-fbbltone.lo `test -f 'fbbltone.c' || echo '$(srcdir)/'`fbbltone.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbbltone.Tpo $(DEPDIR)/libfb_la-fbbltone.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbbltone.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbbltone.Tpo -c -o libfb_la-fbbltone.lo `test -f 'fbbltone.c' || echo '$(srcdir)/'`fbbltone.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbbltone.Tpo $(DEPDIR)/libfb_la-fbbltone.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbbltone.c' object='libfb_la-fbbltone.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbbltone.lo `test -f 'fbbltone.c' || echo '$(srcdir)/'`fbbltone.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbbltone.lo `test -f 'fbbltone.c' || echo '$(srcdir)/'`fbbltone.c
 
 libfb_la-fbcopy.lo: fbcopy.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbcopy.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbcopy.Tpo -c -o libfb_la-fbcopy.lo `test -f 'fbcopy.c' || echo '$(srcdir)/'`fbcopy.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbcopy.Tpo $(DEPDIR)/libfb_la-fbcopy.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbcopy.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbcopy.Tpo -c -o libfb_la-fbcopy.lo `test -f 'fbcopy.c' || echo '$(srcdir)/'`fbcopy.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbcopy.Tpo $(DEPDIR)/libfb_la-fbcopy.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbcopy.c' object='libfb_la-fbcopy.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbcopy.lo `test -f 'fbcopy.c' || echo '$(srcdir)/'`fbcopy.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbcopy.lo `test -f 'fbcopy.c' || echo '$(srcdir)/'`fbcopy.c
 
 libfb_la-fbfill.lo: fbfill.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbfill.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbfill.Tpo -c -o libfb_la-fbfill.lo `test -f 'fbfill.c' || echo '$(srcdir)/'`fbfill.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbfill.Tpo $(DEPDIR)/libfb_la-fbfill.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbfill.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbfill.Tpo -c -o libfb_la-fbfill.lo `test -f 'fbfill.c' || echo '$(srcdir)/'`fbfill.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbfill.Tpo $(DEPDIR)/libfb_la-fbfill.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbfill.c' object='libfb_la-fbfill.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbfill.lo `test -f 'fbfill.c' || echo '$(srcdir)/'`fbfill.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbfill.lo `test -f 'fbfill.c' || echo '$(srcdir)/'`fbfill.c
 
 libfb_la-fbfillrect.lo: fbfillrect.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbfillrect.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbfillrect.Tpo -c -o libfb_la-fbfillrect.lo `test -f 'fbfillrect.c' || echo '$(srcdir)/'`fbfillrect.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbfillrect.Tpo $(DEPDIR)/libfb_la-fbfillrect.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbfillrect.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbfillrect.Tpo -c -o libfb_la-fbfillrect.lo `test -f 'fbfillrect.c' || echo '$(srcdir)/'`fbfillrect.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbfillrect.Tpo $(DEPDIR)/libfb_la-fbfillrect.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbfillrect.c' object='libfb_la-fbfillrect.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbfillrect.lo `test -f 'fbfillrect.c' || echo '$(srcdir)/'`fbfillrect.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbfillrect.lo `test -f 'fbfillrect.c' || echo '$(srcdir)/'`fbfillrect.c
 
 libfb_la-fbfillsp.lo: fbfillsp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbfillsp.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbfillsp.Tpo -c -o libfb_la-fbfillsp.lo `test -f 'fbfillsp.c' || echo '$(srcdir)/'`fbfillsp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbfillsp.Tpo $(DEPDIR)/libfb_la-fbfillsp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbfillsp.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbfillsp.Tpo -c -o libfb_la-fbfillsp.lo `test -f 'fbfillsp.c' || echo '$(srcdir)/'`fbfillsp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbfillsp.Tpo $(DEPDIR)/libfb_la-fbfillsp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbfillsp.c' object='libfb_la-fbfillsp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbfillsp.lo `test -f 'fbfillsp.c' || echo '$(srcdir)/'`fbfillsp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbfillsp.lo `test -f 'fbfillsp.c' || echo '$(srcdir)/'`fbfillsp.c
 
 libfb_la-fbgc.lo: fbgc.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbgc.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbgc.Tpo -c -o libfb_la-fbgc.lo `test -f 'fbgc.c' || echo '$(srcdir)/'`fbgc.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbgc.Tpo $(DEPDIR)/libfb_la-fbgc.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbgc.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbgc.Tpo -c -o libfb_la-fbgc.lo `test -f 'fbgc.c' || echo '$(srcdir)/'`fbgc.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbgc.Tpo $(DEPDIR)/libfb_la-fbgc.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbgc.c' object='libfb_la-fbgc.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbgc.lo `test -f 'fbgc.c' || echo '$(srcdir)/'`fbgc.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbgc.lo `test -f 'fbgc.c' || echo '$(srcdir)/'`fbgc.c
 
 libfb_la-fbgetsp.lo: fbgetsp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbgetsp.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbgetsp.Tpo -c -o libfb_la-fbgetsp.lo `test -f 'fbgetsp.c' || echo '$(srcdir)/'`fbgetsp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbgetsp.Tpo $(DEPDIR)/libfb_la-fbgetsp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbgetsp.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbgetsp.Tpo -c -o libfb_la-fbgetsp.lo `test -f 'fbgetsp.c' || echo '$(srcdir)/'`fbgetsp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbgetsp.Tpo $(DEPDIR)/libfb_la-fbgetsp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbgetsp.c' object='libfb_la-fbgetsp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbgetsp.lo `test -f 'fbgetsp.c' || echo '$(srcdir)/'`fbgetsp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbgetsp.lo `test -f 'fbgetsp.c' || echo '$(srcdir)/'`fbgetsp.c
 
 libfb_la-fbglyph.lo: fbglyph.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbglyph.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbglyph.Tpo -c -o libfb_la-fbglyph.lo `test -f 'fbglyph.c' || echo '$(srcdir)/'`fbglyph.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbglyph.Tpo $(DEPDIR)/libfb_la-fbglyph.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbglyph.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbglyph.Tpo -c -o libfb_la-fbglyph.lo `test -f 'fbglyph.c' || echo '$(srcdir)/'`fbglyph.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbglyph.Tpo $(DEPDIR)/libfb_la-fbglyph.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbglyph.c' object='libfb_la-fbglyph.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbglyph.lo `test -f 'fbglyph.c' || echo '$(srcdir)/'`fbglyph.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbglyph.lo `test -f 'fbglyph.c' || echo '$(srcdir)/'`fbglyph.c
 
 libfb_la-fbimage.lo: fbimage.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbimage.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbimage.Tpo -c -o libfb_la-fbimage.lo `test -f 'fbimage.c' || echo '$(srcdir)/'`fbimage.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbimage.Tpo $(DEPDIR)/libfb_la-fbimage.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbimage.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbimage.Tpo -c -o libfb_la-fbimage.lo `test -f 'fbimage.c' || echo '$(srcdir)/'`fbimage.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbimage.Tpo $(DEPDIR)/libfb_la-fbimage.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbimage.c' object='libfb_la-fbimage.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbimage.lo `test -f 'fbimage.c' || echo '$(srcdir)/'`fbimage.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbimage.lo `test -f 'fbimage.c' || echo '$(srcdir)/'`fbimage.c
 
 libfb_la-fbline.lo: fbline.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbline.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbline.Tpo -c -o libfb_la-fbline.lo `test -f 'fbline.c' || echo '$(srcdir)/'`fbline.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbline.Tpo $(DEPDIR)/libfb_la-fbline.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbline.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbline.Tpo -c -o libfb_la-fbline.lo `test -f 'fbline.c' || echo '$(srcdir)/'`fbline.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbline.Tpo $(DEPDIR)/libfb_la-fbline.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbline.c' object='libfb_la-fbline.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbline.lo `test -f 'fbline.c' || echo '$(srcdir)/'`fbline.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbline.lo `test -f 'fbline.c' || echo '$(srcdir)/'`fbline.c
 
 libfb_la-fboverlay.lo: fboverlay.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fboverlay.lo -MD -MP -MF $(DEPDIR)/libfb_la-fboverlay.Tpo -c -o libfb_la-fboverlay.lo `test -f 'fboverlay.c' || echo '$(srcdir)/'`fboverlay.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fboverlay.Tpo $(DEPDIR)/libfb_la-fboverlay.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fboverlay.lo -MD -MP -MF $(DEPDIR)/libfb_la-fboverlay.Tpo -c -o libfb_la-fboverlay.lo `test -f 'fboverlay.c' || echo '$(srcdir)/'`fboverlay.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fboverlay.Tpo $(DEPDIR)/libfb_la-fboverlay.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fboverlay.c' object='libfb_la-fboverlay.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fboverlay.lo `test -f 'fboverlay.c' || echo '$(srcdir)/'`fboverlay.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fboverlay.lo `test -f 'fboverlay.c' || echo '$(srcdir)/'`fboverlay.c
 
 libfb_la-fbpict.lo: fbpict.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbpict.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbpict.Tpo -c -o libfb_la-fbpict.lo `test -f 'fbpict.c' || echo '$(srcdir)/'`fbpict.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbpict.Tpo $(DEPDIR)/libfb_la-fbpict.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbpict.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbpict.Tpo -c -o libfb_la-fbpict.lo `test -f 'fbpict.c' || echo '$(srcdir)/'`fbpict.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbpict.Tpo $(DEPDIR)/libfb_la-fbpict.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbpict.c' object='libfb_la-fbpict.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbpict.lo `test -f 'fbpict.c' || echo '$(srcdir)/'`fbpict.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbpict.lo `test -f 'fbpict.c' || echo '$(srcdir)/'`fbpict.c
 
 libfb_la-fbpixmap.lo: fbpixmap.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbpixmap.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbpixmap.Tpo -c -o libfb_la-fbpixmap.lo `test -f 'fbpixmap.c' || echo '$(srcdir)/'`fbpixmap.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbpixmap.Tpo $(DEPDIR)/libfb_la-fbpixmap.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbpixmap.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbpixmap.Tpo -c -o libfb_la-fbpixmap.lo `test -f 'fbpixmap.c' || echo '$(srcdir)/'`fbpixmap.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbpixmap.Tpo $(DEPDIR)/libfb_la-fbpixmap.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbpixmap.c' object='libfb_la-fbpixmap.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbpixmap.lo `test -f 'fbpixmap.c' || echo '$(srcdir)/'`fbpixmap.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbpixmap.lo `test -f 'fbpixmap.c' || echo '$(srcdir)/'`fbpixmap.c
 
 libfb_la-fbpoint.lo: fbpoint.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbpoint.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbpoint.Tpo -c -o libfb_la-fbpoint.lo `test -f 'fbpoint.c' || echo '$(srcdir)/'`fbpoint.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbpoint.Tpo $(DEPDIR)/libfb_la-fbpoint.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbpoint.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbpoint.Tpo -c -o libfb_la-fbpoint.lo `test -f 'fbpoint.c' || echo '$(srcdir)/'`fbpoint.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbpoint.Tpo $(DEPDIR)/libfb_la-fbpoint.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbpoint.c' object='libfb_la-fbpoint.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbpoint.lo `test -f 'fbpoint.c' || echo '$(srcdir)/'`fbpoint.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbpoint.lo `test -f 'fbpoint.c' || echo '$(srcdir)/'`fbpoint.c
 
 libfb_la-fbpush.lo: fbpush.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbpush.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbpush.Tpo -c -o libfb_la-fbpush.lo `test -f 'fbpush.c' || echo '$(srcdir)/'`fbpush.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbpush.Tpo $(DEPDIR)/libfb_la-fbpush.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbpush.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbpush.Tpo -c -o libfb_la-fbpush.lo `test -f 'fbpush.c' || echo '$(srcdir)/'`fbpush.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbpush.Tpo $(DEPDIR)/libfb_la-fbpush.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbpush.c' object='libfb_la-fbpush.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbpush.lo `test -f 'fbpush.c' || echo '$(srcdir)/'`fbpush.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbpush.lo `test -f 'fbpush.c' || echo '$(srcdir)/'`fbpush.c
 
 libfb_la-fbscreen.lo: fbscreen.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbscreen.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbscreen.Tpo -c -o libfb_la-fbscreen.lo `test -f 'fbscreen.c' || echo '$(srcdir)/'`fbscreen.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbscreen.Tpo $(DEPDIR)/libfb_la-fbscreen.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbscreen.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbscreen.Tpo -c -o libfb_la-fbscreen.lo `test -f 'fbscreen.c' || echo '$(srcdir)/'`fbscreen.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbscreen.Tpo $(DEPDIR)/libfb_la-fbscreen.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbscreen.c' object='libfb_la-fbscreen.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbscreen.lo `test -f 'fbscreen.c' || echo '$(srcdir)/'`fbscreen.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbscreen.lo `test -f 'fbscreen.c' || echo '$(srcdir)/'`fbscreen.c
 
 libfb_la-fbseg.lo: fbseg.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbseg.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbseg.Tpo -c -o libfb_la-fbseg.lo `test -f 'fbseg.c' || echo '$(srcdir)/'`fbseg.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbseg.Tpo $(DEPDIR)/libfb_la-fbseg.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbseg.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbseg.Tpo -c -o libfb_la-fbseg.lo `test -f 'fbseg.c' || echo '$(srcdir)/'`fbseg.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbseg.Tpo $(DEPDIR)/libfb_la-fbseg.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbseg.c' object='libfb_la-fbseg.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbseg.lo `test -f 'fbseg.c' || echo '$(srcdir)/'`fbseg.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbseg.lo `test -f 'fbseg.c' || echo '$(srcdir)/'`fbseg.c
 
 libfb_la-fbsetsp.lo: fbsetsp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbsetsp.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbsetsp.Tpo -c -o libfb_la-fbsetsp.lo `test -f 'fbsetsp.c' || echo '$(srcdir)/'`fbsetsp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbsetsp.Tpo $(DEPDIR)/libfb_la-fbsetsp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbsetsp.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbsetsp.Tpo -c -o libfb_la-fbsetsp.lo `test -f 'fbsetsp.c' || echo '$(srcdir)/'`fbsetsp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbsetsp.Tpo $(DEPDIR)/libfb_la-fbsetsp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbsetsp.c' object='libfb_la-fbsetsp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbsetsp.lo `test -f 'fbsetsp.c' || echo '$(srcdir)/'`fbsetsp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbsetsp.lo `test -f 'fbsetsp.c' || echo '$(srcdir)/'`fbsetsp.c
 
 libfb_la-fbsolid.lo: fbsolid.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbsolid.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbsolid.Tpo -c -o libfb_la-fbsolid.lo `test -f 'fbsolid.c' || echo '$(srcdir)/'`fbsolid.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbsolid.Tpo $(DEPDIR)/libfb_la-fbsolid.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbsolid.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbsolid.Tpo -c -o libfb_la-fbsolid.lo `test -f 'fbsolid.c' || echo '$(srcdir)/'`fbsolid.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbsolid.Tpo $(DEPDIR)/libfb_la-fbsolid.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbsolid.c' object='libfb_la-fbsolid.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbsolid.lo `test -f 'fbsolid.c' || echo '$(srcdir)/'`fbsolid.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbsolid.lo `test -f 'fbsolid.c' || echo '$(srcdir)/'`fbsolid.c
 
 libfb_la-fbstipple.lo: fbstipple.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbstipple.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbstipple.Tpo -c -o libfb_la-fbstipple.lo `test -f 'fbstipple.c' || echo '$(srcdir)/'`fbstipple.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbstipple.Tpo $(DEPDIR)/libfb_la-fbstipple.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbstipple.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbstipple.Tpo -c -o libfb_la-fbstipple.lo `test -f 'fbstipple.c' || echo '$(srcdir)/'`fbstipple.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbstipple.Tpo $(DEPDIR)/libfb_la-fbstipple.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbstipple.c' object='libfb_la-fbstipple.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbstipple.lo `test -f 'fbstipple.c' || echo '$(srcdir)/'`fbstipple.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbstipple.lo `test -f 'fbstipple.c' || echo '$(srcdir)/'`fbstipple.c
 
 libfb_la-fbtile.lo: fbtile.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbtile.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbtile.Tpo -c -o libfb_la-fbtile.lo `test -f 'fbtile.c' || echo '$(srcdir)/'`fbtile.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbtile.Tpo $(DEPDIR)/libfb_la-fbtile.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbtile.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbtile.Tpo -c -o libfb_la-fbtile.lo `test -f 'fbtile.c' || echo '$(srcdir)/'`fbtile.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbtile.Tpo $(DEPDIR)/libfb_la-fbtile.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbtile.c' object='libfb_la-fbtile.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbtile.lo `test -f 'fbtile.c' || echo '$(srcdir)/'`fbtile.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbtile.lo `test -f 'fbtile.c' || echo '$(srcdir)/'`fbtile.c
 
 libfb_la-fbtrap.lo: fbtrap.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbtrap.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbtrap.Tpo -c -o libfb_la-fbtrap.lo `test -f 'fbtrap.c' || echo '$(srcdir)/'`fbtrap.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbtrap.Tpo $(DEPDIR)/libfb_la-fbtrap.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbtrap.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbtrap.Tpo -c -o libfb_la-fbtrap.lo `test -f 'fbtrap.c' || echo '$(srcdir)/'`fbtrap.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbtrap.Tpo $(DEPDIR)/libfb_la-fbtrap.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbtrap.c' object='libfb_la-fbtrap.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbtrap.lo `test -f 'fbtrap.c' || echo '$(srcdir)/'`fbtrap.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbtrap.lo `test -f 'fbtrap.c' || echo '$(srcdir)/'`fbtrap.c
 
 libfb_la-fbutil.lo: fbutil.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbutil.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbutil.Tpo -c -o libfb_la-fbutil.lo `test -f 'fbutil.c' || echo '$(srcdir)/'`fbutil.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbutil.Tpo $(DEPDIR)/libfb_la-fbutil.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbutil.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbutil.Tpo -c -o libfb_la-fbutil.lo `test -f 'fbutil.c' || echo '$(srcdir)/'`fbutil.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbutil.Tpo $(DEPDIR)/libfb_la-fbutil.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbutil.c' object='libfb_la-fbutil.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbutil.lo `test -f 'fbutil.c' || echo '$(srcdir)/'`fbutil.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbutil.lo `test -f 'fbutil.c' || echo '$(srcdir)/'`fbutil.c
 
 libfb_la-fbwindow.lo: fbwindow.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbwindow.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbwindow.Tpo -c -o libfb_la-fbwindow.lo `test -f 'fbwindow.c' || echo '$(srcdir)/'`fbwindow.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbwindow.Tpo $(DEPDIR)/libfb_la-fbwindow.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbwindow.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbwindow.Tpo -c -o libfb_la-fbwindow.lo `test -f 'fbwindow.c' || echo '$(srcdir)/'`fbwindow.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbwindow.Tpo $(DEPDIR)/libfb_la-fbwindow.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbwindow.c' object='libfb_la-fbwindow.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbwindow.lo `test -f 'fbwindow.c' || echo '$(srcdir)/'`fbwindow.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbwindow.lo `test -f 'fbwindow.c' || echo '$(srcdir)/'`fbwindow.c
 
 libwfb_la-fb24_32.lo: fb24_32.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fb24_32.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fb24_32.Tpo -c -o libwfb_la-fb24_32.lo `test -f 'fb24_32.c' || echo '$(srcdir)/'`fb24_32.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fb24_32.Tpo $(DEPDIR)/libwfb_la-fb24_32.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fb24_32.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fb24_32.Tpo -c -o libwfb_la-fb24_32.lo `test -f 'fb24_32.c' || echo '$(srcdir)/'`fb24_32.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fb24_32.Tpo $(DEPDIR)/libwfb_la-fb24_32.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fb24_32.c' object='libwfb_la-fb24_32.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fb24_32.lo `test -f 'fb24_32.c' || echo '$(srcdir)/'`fb24_32.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fb24_32.lo `test -f 'fb24_32.c' || echo '$(srcdir)/'`fb24_32.c
 
 libwfb_la-fballpriv.lo: fballpriv.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fballpriv.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fballpriv.Tpo -c -o libwfb_la-fballpriv.lo `test -f 'fballpriv.c' || echo '$(srcdir)/'`fballpriv.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fballpriv.Tpo $(DEPDIR)/libwfb_la-fballpriv.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fballpriv.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fballpriv.Tpo -c -o libwfb_la-fballpriv.lo `test -f 'fballpriv.c' || echo '$(srcdir)/'`fballpriv.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fballpriv.Tpo $(DEPDIR)/libwfb_la-fballpriv.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fballpriv.c' object='libwfb_la-fballpriv.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fballpriv.lo `test -f 'fballpriv.c' || echo '$(srcdir)/'`fballpriv.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fballpriv.lo `test -f 'fballpriv.c' || echo '$(srcdir)/'`fballpriv.c
 
 libwfb_la-fbarc.lo: fbarc.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbarc.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbarc.Tpo -c -o libwfb_la-fbarc.lo `test -f 'fbarc.c' || echo '$(srcdir)/'`fbarc.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbarc.Tpo $(DEPDIR)/libwfb_la-fbarc.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbarc.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbarc.Tpo -c -o libwfb_la-fbarc.lo `test -f 'fbarc.c' || echo '$(srcdir)/'`fbarc.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbarc.Tpo $(DEPDIR)/libwfb_la-fbarc.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbarc.c' object='libwfb_la-fbarc.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbarc.lo `test -f 'fbarc.c' || echo '$(srcdir)/'`fbarc.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbarc.lo `test -f 'fbarc.c' || echo '$(srcdir)/'`fbarc.c
 
 libwfb_la-fbbits.lo: fbbits.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbbits.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbbits.Tpo -c -o libwfb_la-fbbits.lo `test -f 'fbbits.c' || echo '$(srcdir)/'`fbbits.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbbits.Tpo $(DEPDIR)/libwfb_la-fbbits.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbbits.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbbits.Tpo -c -o libwfb_la-fbbits.lo `test -f 'fbbits.c' || echo '$(srcdir)/'`fbbits.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbbits.Tpo $(DEPDIR)/libwfb_la-fbbits.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbbits.c' object='libwfb_la-fbbits.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbbits.lo `test -f 'fbbits.c' || echo '$(srcdir)/'`fbbits.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbbits.lo `test -f 'fbbits.c' || echo '$(srcdir)/'`fbbits.c
 
 libwfb_la-fbblt.lo: fbblt.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbblt.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbblt.Tpo -c -o libwfb_la-fbblt.lo `test -f 'fbblt.c' || echo '$(srcdir)/'`fbblt.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbblt.Tpo $(DEPDIR)/libwfb_la-fbblt.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbblt.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbblt.Tpo -c -o libwfb_la-fbblt.lo `test -f 'fbblt.c' || echo '$(srcdir)/'`fbblt.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbblt.Tpo $(DEPDIR)/libwfb_la-fbblt.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbblt.c' object='libwfb_la-fbblt.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbblt.lo `test -f 'fbblt.c' || echo '$(srcdir)/'`fbblt.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbblt.lo `test -f 'fbblt.c' || echo '$(srcdir)/'`fbblt.c
 
 libwfb_la-fbbltone.lo: fbbltone.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbbltone.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbbltone.Tpo -c -o libwfb_la-fbbltone.lo `test -f 'fbbltone.c' || echo '$(srcdir)/'`fbbltone.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbbltone.Tpo $(DEPDIR)/libwfb_la-fbbltone.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbbltone.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbbltone.Tpo -c -o libwfb_la-fbbltone.lo `test -f 'fbbltone.c' || echo '$(srcdir)/'`fbbltone.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbbltone.Tpo $(DEPDIR)/libwfb_la-fbbltone.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbbltone.c' object='libwfb_la-fbbltone.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbbltone.lo `test -f 'fbbltone.c' || echo '$(srcdir)/'`fbbltone.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbbltone.lo `test -f 'fbbltone.c' || echo '$(srcdir)/'`fbbltone.c
 
 libwfb_la-fbcopy.lo: fbcopy.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbcopy.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbcopy.Tpo -c -o libwfb_la-fbcopy.lo `test -f 'fbcopy.c' || echo '$(srcdir)/'`fbcopy.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbcopy.Tpo $(DEPDIR)/libwfb_la-fbcopy.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbcopy.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbcopy.Tpo -c -o libwfb_la-fbcopy.lo `test -f 'fbcopy.c' || echo '$(srcdir)/'`fbcopy.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbcopy.Tpo $(DEPDIR)/libwfb_la-fbcopy.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbcopy.c' object='libwfb_la-fbcopy.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbcopy.lo `test -f 'fbcopy.c' || echo '$(srcdir)/'`fbcopy.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbcopy.lo `test -f 'fbcopy.c' || echo '$(srcdir)/'`fbcopy.c
 
 libwfb_la-fbfill.lo: fbfill.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbfill.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbfill.Tpo -c -o libwfb_la-fbfill.lo `test -f 'fbfill.c' || echo '$(srcdir)/'`fbfill.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbfill.Tpo $(DEPDIR)/libwfb_la-fbfill.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbfill.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbfill.Tpo -c -o libwfb_la-fbfill.lo `test -f 'fbfill.c' || echo '$(srcdir)/'`fbfill.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbfill.Tpo $(DEPDIR)/libwfb_la-fbfill.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbfill.c' object='libwfb_la-fbfill.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbfill.lo `test -f 'fbfill.c' || echo '$(srcdir)/'`fbfill.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbfill.lo `test -f 'fbfill.c' || echo '$(srcdir)/'`fbfill.c
 
 libwfb_la-fbfillrect.lo: fbfillrect.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbfillrect.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbfillrect.Tpo -c -o libwfb_la-fbfillrect.lo `test -f 'fbfillrect.c' || echo '$(srcdir)/'`fbfillrect.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbfillrect.Tpo $(DEPDIR)/libwfb_la-fbfillrect.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbfillrect.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbfillrect.Tpo -c -o libwfb_la-fbfillrect.lo `test -f 'fbfillrect.c' || echo '$(srcdir)/'`fbfillrect.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbfillrect.Tpo $(DEPDIR)/libwfb_la-fbfillrect.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbfillrect.c' object='libwfb_la-fbfillrect.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbfillrect.lo `test -f 'fbfillrect.c' || echo '$(srcdir)/'`fbfillrect.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbfillrect.lo `test -f 'fbfillrect.c' || echo '$(srcdir)/'`fbfillrect.c
 
 libwfb_la-fbfillsp.lo: fbfillsp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbfillsp.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbfillsp.Tpo -c -o libwfb_la-fbfillsp.lo `test -f 'fbfillsp.c' || echo '$(srcdir)/'`fbfillsp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbfillsp.Tpo $(DEPDIR)/libwfb_la-fbfillsp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbfillsp.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbfillsp.Tpo -c -o libwfb_la-fbfillsp.lo `test -f 'fbfillsp.c' || echo '$(srcdir)/'`fbfillsp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbfillsp.Tpo $(DEPDIR)/libwfb_la-fbfillsp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbfillsp.c' object='libwfb_la-fbfillsp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbfillsp.lo `test -f 'fbfillsp.c' || echo '$(srcdir)/'`fbfillsp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbfillsp.lo `test -f 'fbfillsp.c' || echo '$(srcdir)/'`fbfillsp.c
 
 libwfb_la-fbgc.lo: fbgc.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbgc.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbgc.Tpo -c -o libwfb_la-fbgc.lo `test -f 'fbgc.c' || echo '$(srcdir)/'`fbgc.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbgc.Tpo $(DEPDIR)/libwfb_la-fbgc.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbgc.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbgc.Tpo -c -o libwfb_la-fbgc.lo `test -f 'fbgc.c' || echo '$(srcdir)/'`fbgc.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbgc.Tpo $(DEPDIR)/libwfb_la-fbgc.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbgc.c' object='libwfb_la-fbgc.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbgc.lo `test -f 'fbgc.c' || echo '$(srcdir)/'`fbgc.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbgc.lo `test -f 'fbgc.c' || echo '$(srcdir)/'`fbgc.c
 
 libwfb_la-fbgetsp.lo: fbgetsp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbgetsp.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbgetsp.Tpo -c -o libwfb_la-fbgetsp.lo `test -f 'fbgetsp.c' || echo '$(srcdir)/'`fbgetsp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbgetsp.Tpo $(DEPDIR)/libwfb_la-fbgetsp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbgetsp.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbgetsp.Tpo -c -o libwfb_la-fbgetsp.lo `test -f 'fbgetsp.c' || echo '$(srcdir)/'`fbgetsp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbgetsp.Tpo $(DEPDIR)/libwfb_la-fbgetsp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbgetsp.c' object='libwfb_la-fbgetsp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbgetsp.lo `test -f 'fbgetsp.c' || echo '$(srcdir)/'`fbgetsp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbgetsp.lo `test -f 'fbgetsp.c' || echo '$(srcdir)/'`fbgetsp.c
 
 libwfb_la-fbglyph.lo: fbglyph.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbglyph.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbglyph.Tpo -c -o libwfb_la-fbglyph.lo `test -f 'fbglyph.c' || echo '$(srcdir)/'`fbglyph.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbglyph.Tpo $(DEPDIR)/libwfb_la-fbglyph.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbglyph.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbglyph.Tpo -c -o libwfb_la-fbglyph.lo `test -f 'fbglyph.c' || echo '$(srcdir)/'`fbglyph.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbglyph.Tpo $(DEPDIR)/libwfb_la-fbglyph.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbglyph.c' object='libwfb_la-fbglyph.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbglyph.lo `test -f 'fbglyph.c' || echo '$(srcdir)/'`fbglyph.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbglyph.lo `test -f 'fbglyph.c' || echo '$(srcdir)/'`fbglyph.c
 
 libwfb_la-fbimage.lo: fbimage.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbimage.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbimage.Tpo -c -o libwfb_la-fbimage.lo `test -f 'fbimage.c' || echo '$(srcdir)/'`fbimage.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbimage.Tpo $(DEPDIR)/libwfb_la-fbimage.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbimage.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbimage.Tpo -c -o libwfb_la-fbimage.lo `test -f 'fbimage.c' || echo '$(srcdir)/'`fbimage.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbimage.Tpo $(DEPDIR)/libwfb_la-fbimage.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbimage.c' object='libwfb_la-fbimage.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbimage.lo `test -f 'fbimage.c' || echo '$(srcdir)/'`fbimage.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbimage.lo `test -f 'fbimage.c' || echo '$(srcdir)/'`fbimage.c
 
 libwfb_la-fbline.lo: fbline.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbline.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbline.Tpo -c -o libwfb_la-fbline.lo `test -f 'fbline.c' || echo '$(srcdir)/'`fbline.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbline.Tpo $(DEPDIR)/libwfb_la-fbline.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbline.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbline.Tpo -c -o libwfb_la-fbline.lo `test -f 'fbline.c' || echo '$(srcdir)/'`fbline.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbline.Tpo $(DEPDIR)/libwfb_la-fbline.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbline.c' object='libwfb_la-fbline.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbline.lo `test -f 'fbline.c' || echo '$(srcdir)/'`fbline.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbline.lo `test -f 'fbline.c' || echo '$(srcdir)/'`fbline.c
 
 libwfb_la-fboverlay.lo: fboverlay.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fboverlay.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fboverlay.Tpo -c -o libwfb_la-fboverlay.lo `test -f 'fboverlay.c' || echo '$(srcdir)/'`fboverlay.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fboverlay.Tpo $(DEPDIR)/libwfb_la-fboverlay.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fboverlay.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fboverlay.Tpo -c -o libwfb_la-fboverlay.lo `test -f 'fboverlay.c' || echo '$(srcdir)/'`fboverlay.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fboverlay.Tpo $(DEPDIR)/libwfb_la-fboverlay.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fboverlay.c' object='libwfb_la-fboverlay.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fboverlay.lo `test -f 'fboverlay.c' || echo '$(srcdir)/'`fboverlay.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fboverlay.lo `test -f 'fboverlay.c' || echo '$(srcdir)/'`fboverlay.c
 
 libwfb_la-fbpict.lo: fbpict.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbpict.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbpict.Tpo -c -o libwfb_la-fbpict.lo `test -f 'fbpict.c' || echo '$(srcdir)/'`fbpict.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbpict.Tpo $(DEPDIR)/libwfb_la-fbpict.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbpict.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbpict.Tpo -c -o libwfb_la-fbpict.lo `test -f 'fbpict.c' || echo '$(srcdir)/'`fbpict.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbpict.Tpo $(DEPDIR)/libwfb_la-fbpict.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbpict.c' object='libwfb_la-fbpict.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbpict.lo `test -f 'fbpict.c' || echo '$(srcdir)/'`fbpict.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbpict.lo `test -f 'fbpict.c' || echo '$(srcdir)/'`fbpict.c
 
 libwfb_la-fbpixmap.lo: fbpixmap.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbpixmap.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbpixmap.Tpo -c -o libwfb_la-fbpixmap.lo `test -f 'fbpixmap.c' || echo '$(srcdir)/'`fbpixmap.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbpixmap.Tpo $(DEPDIR)/libwfb_la-fbpixmap.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbpixmap.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbpixmap.Tpo -c -o libwfb_la-fbpixmap.lo `test -f 'fbpixmap.c' || echo '$(srcdir)/'`fbpixmap.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbpixmap.Tpo $(DEPDIR)/libwfb_la-fbpixmap.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbpixmap.c' object='libwfb_la-fbpixmap.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbpixmap.lo `test -f 'fbpixmap.c' || echo '$(srcdir)/'`fbpixmap.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbpixmap.lo `test -f 'fbpixmap.c' || echo '$(srcdir)/'`fbpixmap.c
 
 libwfb_la-fbpoint.lo: fbpoint.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbpoint.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbpoint.Tpo -c -o libwfb_la-fbpoint.lo `test -f 'fbpoint.c' || echo '$(srcdir)/'`fbpoint.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbpoint.Tpo $(DEPDIR)/libwfb_la-fbpoint.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbpoint.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbpoint.Tpo -c -o libwfb_la-fbpoint.lo `test -f 'fbpoint.c' || echo '$(srcdir)/'`fbpoint.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbpoint.Tpo $(DEPDIR)/libwfb_la-fbpoint.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbpoint.c' object='libwfb_la-fbpoint.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbpoint.lo `test -f 'fbpoint.c' || echo '$(srcdir)/'`fbpoint.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbpoint.lo `test -f 'fbpoint.c' || echo '$(srcdir)/'`fbpoint.c
 
 libwfb_la-fbpush.lo: fbpush.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbpush.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbpush.Tpo -c -o libwfb_la-fbpush.lo `test -f 'fbpush.c' || echo '$(srcdir)/'`fbpush.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbpush.Tpo $(DEPDIR)/libwfb_la-fbpush.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbpush.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbpush.Tpo -c -o libwfb_la-fbpush.lo `test -f 'fbpush.c' || echo '$(srcdir)/'`fbpush.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbpush.Tpo $(DEPDIR)/libwfb_la-fbpush.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbpush.c' object='libwfb_la-fbpush.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbpush.lo `test -f 'fbpush.c' || echo '$(srcdir)/'`fbpush.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbpush.lo `test -f 'fbpush.c' || echo '$(srcdir)/'`fbpush.c
 
 libwfb_la-fbscreen.lo: fbscreen.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbscreen.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbscreen.Tpo -c -o libwfb_la-fbscreen.lo `test -f 'fbscreen.c' || echo '$(srcdir)/'`fbscreen.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbscreen.Tpo $(DEPDIR)/libwfb_la-fbscreen.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbscreen.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbscreen.Tpo -c -o libwfb_la-fbscreen.lo `test -f 'fbscreen.c' || echo '$(srcdir)/'`fbscreen.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbscreen.Tpo $(DEPDIR)/libwfb_la-fbscreen.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbscreen.c' object='libwfb_la-fbscreen.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbscreen.lo `test -f 'fbscreen.c' || echo '$(srcdir)/'`fbscreen.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbscreen.lo `test -f 'fbscreen.c' || echo '$(srcdir)/'`fbscreen.c
 
 libwfb_la-fbseg.lo: fbseg.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbseg.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbseg.Tpo -c -o libwfb_la-fbseg.lo `test -f 'fbseg.c' || echo '$(srcdir)/'`fbseg.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbseg.Tpo $(DEPDIR)/libwfb_la-fbseg.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbseg.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbseg.Tpo -c -o libwfb_la-fbseg.lo `test -f 'fbseg.c' || echo '$(srcdir)/'`fbseg.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbseg.Tpo $(DEPDIR)/libwfb_la-fbseg.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbseg.c' object='libwfb_la-fbseg.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbseg.lo `test -f 'fbseg.c' || echo '$(srcdir)/'`fbseg.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbseg.lo `test -f 'fbseg.c' || echo '$(srcdir)/'`fbseg.c
 
 libwfb_la-fbsetsp.lo: fbsetsp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbsetsp.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbsetsp.Tpo -c -o libwfb_la-fbsetsp.lo `test -f 'fbsetsp.c' || echo '$(srcdir)/'`fbsetsp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbsetsp.Tpo $(DEPDIR)/libwfb_la-fbsetsp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbsetsp.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbsetsp.Tpo -c -o libwfb_la-fbsetsp.lo `test -f 'fbsetsp.c' || echo '$(srcdir)/'`fbsetsp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbsetsp.Tpo $(DEPDIR)/libwfb_la-fbsetsp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbsetsp.c' object='libwfb_la-fbsetsp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbsetsp.lo `test -f 'fbsetsp.c' || echo '$(srcdir)/'`fbsetsp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbsetsp.lo `test -f 'fbsetsp.c' || echo '$(srcdir)/'`fbsetsp.c
 
 libwfb_la-fbsolid.lo: fbsolid.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbsolid.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbsolid.Tpo -c -o libwfb_la-fbsolid.lo `test -f 'fbsolid.c' || echo '$(srcdir)/'`fbsolid.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbsolid.Tpo $(DEPDIR)/libwfb_la-fbsolid.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbsolid.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbsolid.Tpo -c -o libwfb_la-fbsolid.lo `test -f 'fbsolid.c' || echo '$(srcdir)/'`fbsolid.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbsolid.Tpo $(DEPDIR)/libwfb_la-fbsolid.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbsolid.c' object='libwfb_la-fbsolid.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbsolid.lo `test -f 'fbsolid.c' || echo '$(srcdir)/'`fbsolid.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbsolid.lo `test -f 'fbsolid.c' || echo '$(srcdir)/'`fbsolid.c
 
 libwfb_la-fbstipple.lo: fbstipple.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbstipple.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbstipple.Tpo -c -o libwfb_la-fbstipple.lo `test -f 'fbstipple.c' || echo '$(srcdir)/'`fbstipple.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbstipple.Tpo $(DEPDIR)/libwfb_la-fbstipple.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbstipple.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbstipple.Tpo -c -o libwfb_la-fbstipple.lo `test -f 'fbstipple.c' || echo '$(srcdir)/'`fbstipple.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbstipple.Tpo $(DEPDIR)/libwfb_la-fbstipple.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbstipple.c' object='libwfb_la-fbstipple.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbstipple.lo `test -f 'fbstipple.c' || echo '$(srcdir)/'`fbstipple.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbstipple.lo `test -f 'fbstipple.c' || echo '$(srcdir)/'`fbstipple.c
 
 libwfb_la-fbtile.lo: fbtile.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbtile.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbtile.Tpo -c -o libwfb_la-fbtile.lo `test -f 'fbtile.c' || echo '$(srcdir)/'`fbtile.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbtile.Tpo $(DEPDIR)/libwfb_la-fbtile.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbtile.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbtile.Tpo -c -o libwfb_la-fbtile.lo `test -f 'fbtile.c' || echo '$(srcdir)/'`fbtile.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbtile.Tpo $(DEPDIR)/libwfb_la-fbtile.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbtile.c' object='libwfb_la-fbtile.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbtile.lo `test -f 'fbtile.c' || echo '$(srcdir)/'`fbtile.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbtile.lo `test -f 'fbtile.c' || echo '$(srcdir)/'`fbtile.c
 
 libwfb_la-fbtrap.lo: fbtrap.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbtrap.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbtrap.Tpo -c -o libwfb_la-fbtrap.lo `test -f 'fbtrap.c' || echo '$(srcdir)/'`fbtrap.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbtrap.Tpo $(DEPDIR)/libwfb_la-fbtrap.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbtrap.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbtrap.Tpo -c -o libwfb_la-fbtrap.lo `test -f 'fbtrap.c' || echo '$(srcdir)/'`fbtrap.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbtrap.Tpo $(DEPDIR)/libwfb_la-fbtrap.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbtrap.c' object='libwfb_la-fbtrap.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbtrap.lo `test -f 'fbtrap.c' || echo '$(srcdir)/'`fbtrap.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbtrap.lo `test -f 'fbtrap.c' || echo '$(srcdir)/'`fbtrap.c
 
 libwfb_la-fbutil.lo: fbutil.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbutil.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbutil.Tpo -c -o libwfb_la-fbutil.lo `test -f 'fbutil.c' || echo '$(srcdir)/'`fbutil.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbutil.Tpo $(DEPDIR)/libwfb_la-fbutil.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbutil.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbutil.Tpo -c -o libwfb_la-fbutil.lo `test -f 'fbutil.c' || echo '$(srcdir)/'`fbutil.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbutil.Tpo $(DEPDIR)/libwfb_la-fbutil.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbutil.c' object='libwfb_la-fbutil.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbutil.lo `test -f 'fbutil.c' || echo '$(srcdir)/'`fbutil.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbutil.lo `test -f 'fbutil.c' || echo '$(srcdir)/'`fbutil.c
 
 libwfb_la-fbwindow.lo: fbwindow.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbwindow.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbwindow.Tpo -c -o libwfb_la-fbwindow.lo `test -f 'fbwindow.c' || echo '$(srcdir)/'`fbwindow.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbwindow.Tpo $(DEPDIR)/libwfb_la-fbwindow.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbwindow.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbwindow.Tpo -c -o libwfb_la-fbwindow.lo `test -f 'fbwindow.c' || echo '$(srcdir)/'`fbwindow.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbwindow.Tpo $(DEPDIR)/libwfb_la-fbwindow.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbwindow.c' object='libwfb_la-fbwindow.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbwindow.lo `test -f 'fbwindow.c' || echo '$(srcdir)/'`fbwindow.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbwindow.lo `test -f 'fbwindow.c' || echo '$(srcdir)/'`fbwindow.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -981,20 +1001,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -1008,7 +1031,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -1016,29 +1039,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -1059,13 +1087,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -1096,6 +1128,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -1117,6 +1150,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -1125,18 +1160,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -1175,6 +1220,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/fonts.src/font-util/COPYING b/xorg-server/fonts.src/font-util/COPYING
index 3afe554b3..9ce7238de 100644
--- a/xorg-server/fonts.src/font-util/COPYING
+++ b/xorg-server/fonts.src/font-util/COPYING
@@ -12,9 +12,6 @@ are met:
 2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following disclaimer in the
    documentation and/or other materials provided with the distribution.
-3. Neither the name of The NetBSD Foundation nor the names of its
-   contributors may be used to endorse or promote products derived
-   from this software without specific prior written permission.
 
 THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
@@ -27,3 +24,74 @@ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGE.
+
+  ------------------------------------------------------------------------
+
+Copyright (c) 2006 Martin Husemann.
+Copyright (c) 2007 Joerg Sonnenberger.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+2. The name of the author may not be used to endorse or promote
+   products derived from this software without specific prior
+   written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+  ------------------------------------------------------------------------
+
+Copyright 2005 Red Hat, Inc
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation.
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of the copyright holders shall
+not be used in advertising or otherwise to promote the sale, use or
+other dealings in this Software without prior written authorization
+from the copyright holders.
+
+  ------------------------------------------------------------------------
+
+Copyright (c) 1991-2003 Unicode, Inc.  All Rights reserved.
+
+This file is provided as-is by Unicode, Inc. (The Unicode Consortium).
+No claims are made as to fitness for any particular purpose.  No
+warranties of any kind are expressed or implied.  The recipient
+agrees to determine applicability of information provided.  If this
+file has been provided on optical media by Unicode, Inc., the sole
+remedy for any claim will be exchange of defective media within 90
+days of receipt.
+
+Unicode, Inc. hereby grants the right to freely use the information
+supplied in this file in the creation of products supporting the
+Unicode Standard, and to make copies of this file in any form for
+internal or external distribution as long as this notice remains
+attached.
diff --git a/xorg-server/fonts.src/font-util/ChangeLog b/xorg-server/fonts.src/font-util/ChangeLog
index c826126fe..b2c2c8180 100644
--- a/xorg-server/fonts.src/font-util/ChangeLog
+++ b/xorg-server/fonts.src/font-util/ChangeLog
@@ -1,48 +1,263 @@
-2006-05-15  Adam Jackson  <ajax@freedesktop.org>
+commit ca16bc230e73bfbf651acb9010ba695bbbef0e8a
+Author: Julien Cristau <jcristau@debian.org>
+Date:   Fri Aug 7 21:47:25 2009 +0200
 
-	* configure.ac:
-	Bump to 1.0.1
+    Bump to 1.0.2
 
-2006-02-17  Alan Coopersmith  <alan.coopersmith@sun.com>
+commit b0e27b7935e8f5f9ad3dd7b6fd77b8a38aa7d1d0
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Thu Feb 19 18:22:31 2009 -0800
 
-	* ucs2any.c: 
-	* COPYING:
-	Sync license statement with NetBSD, which has removed advertising 
-	clause from original NetBSD license.   (See
-	http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/xsrc/xfree/xc/fonts/util/ucs2any.c?rev=1.9&content-type=text/plain and
-	http://www.mail-archive.com/devel%40xfree86.org/msg07685.html )
+    Add README with pointers to mailing list, bugzilla & git repos
 
-2005-12-14  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+commit db703deee7cbfca5b12f4666229136a54554ec98
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Thu Feb 19 18:20:14 2009 -0800
 
-	* configure.ac:
-	Update package version number for final X11R7 release candidate.
+    Add missing copyright/license notices to COPYING
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
 
-2005-12-09  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+commit 0678b945e4f382c45048e3d1a9739282d506b47e
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date:   Tue Jan 27 19:11:08 2009 -0200
 
-	* Makefile.am:
-	* configure.ac:
-	* fontutil.pc.in:
-	Bug #5175: Make mapdir configurable (David Coulthart and Donnie
-	Berkholz).
+    Janitor: Correct make distcheck and configure.ac simplification
 
-2005-12-06  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+commit de26fc14c3e5ecc24f4fbdf0c83d57f5974ed802
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date:   Tue Jun 24 14:28:27 2008 -0700
 
-	* Makefile.am:
-	Change *man_SOURCES ==> *man_PRE to fix autotools warnings.
+    Update license of code copyrighted by the NetBSD Foundation
+    
+    As per http://mail-index.netbsd.org/netbsd-announce/2008/06/20/msg000030.html
+    dropped the endorsement clause and verified remaining text matches current
+    NetBSD Foundation license.
 
-2005-12-03  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+commit 2defe2544aeaeea00e41a2dca18b1f5ec0ca85e0
+Author: James Cloos <cloos@jhcloos.com>
+Date:   Thu Dec 6 16:38:07 2007 -0500
 
-	* configure.ac:
-	Update package version number for X11R7 RC3 release.
+    Replace static ChangeLog with dist-hook to generate from git log
 
-2005-11-15  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+commit fb486bb1a5038912d064291b12c7aef5da3d8b63
+Author: James Cloos <cloos@jhcloos.com>
+Date:   Mon Dec 3 16:42:39 2007 -0500
 
-	* Makefile.am:
-	* fontutil.m4:
-	Add configure option macro to disable ISO8859-* fonts.
+    Replace bdftruncate Perl script with C program
+    From bugzilla bug 13465¹:
+    
+      [This] is a replacement for the bdftruncate program, which removes
+      the only runtime dependency on Perl in modular Xorg.
+    
+    1] http://bugs.freedesktop.org/show_bug.cgi?id=13465
+    
+    Bug was posted by Joerg Sonnenberger <joerg@NetBSD.org>.
 
-2005-10-18  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+commit cedfe304041ecfc43cfcf2b44699efb53fc6aa5c
+Author: James Cloos <cloos@jhcloos.com>
+Date:   Mon Sep 3 05:53:24 2007 -0400
 
-	* configure.ac:
-	Update package version number for RC1 release.
+    Add *~ to .gitignore to skip patch/emacs droppings
 
+commit cff602a576aada75140b6cf13f1532218959189d
+Author: James Cloos <cloos@jhcloos.com>
+Date:   Thu Aug 23 19:26:51 2007 -0400
+
+    Rename .cvsignore to .gitignore
+
+commit 7e2dfd48d78c008d8afd56828bf0db8a025f417a
+Author: Adam Jackson <ajax@nwnk.net>
+Date:   Fri May 19 18:35:15 2006 +0000
+
+    Bump to 1.0.1
+
+commit 449004af4c7023511471db479b58c547270805e5
+Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
+Date:   Fri Feb 17 15:59:48 2006 +0000
+
+    Update license copy in COPYING file too.
+
+commit d36e97caf2141939cbd516d9f7802bb704f13f22
+Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
+Date:   Fri Feb 17 15:58:37 2006 +0000
+
+    Sync license statement with NetBSD, which has removed advertising clause
+        from original NetBSD license. (See
+        http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/xsrc/xfree/xc/fonts/util
+        /ucs2any.c?rev=1.9&content-type=text/plain and
+        http://www.mail-archive.com/devel%40xfree86.org/msg07685.html )
+
+commit 778c667cf5dc67a53996e0196a7394dbd41426a3
+Author: Kevin E Martin <kem@kem.org>
+Date:   Thu Dec 15 00:24:26 2005 +0000
+
+    Update package version number for final X11R7 release candidate.
+
+commit 25ea9d0868ecf3dccfbac5a82c659b852fb61d0e
+Author: Kevin E Martin <kem@kem.org>
+Date:   Fri Dec 9 05:56:52 2005 +0000
+
+    Bug #5175: Make mapdir configurable (David Coulthart and Donnie Berkholz).
+
+commit 3fc66a4a7e844d96c478ff35673ba6bbcd99df0a
+Author: Kevin E Martin <kem@kem.org>
+Date:   Tue Dec 6 22:48:41 2005 +0000
+
+    Change *man_SOURCES ==> *man_PRE to fix autotools warnings.
+
+commit 19a7b8a70f3cfac4dbc652cc918deefba2380700
+Author: Kevin E Martin <kem@kem.org>
+Date:   Sat Dec 3 05:49:41 2005 +0000
+
+    Update package version number for X11R7 RC3 release.
+
+commit 092577dbc7f5fe59bbec80b29f42bacb73844fa7
+Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
+Date:   Mon Nov 28 22:07:21 2005 +0000
+
+    Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4
+        update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir)
+
+commit 27506bc355dd88c2ca8b3e14c8158dfb5d6e53b6
+Author: Eric Anholt <anholt@freebsd.org>
+Date:   Tue Nov 22 02:00:22 2005 +0000
+
+    Add .cvsignores for fonts.
+
+commit c9e22d273e7b8df6ffa1224978d0a6877b57c626
+Author: Kevin E Martin <kem@kem.org>
+Date:   Tue Nov 15 08:27:53 2005 +0000
+
+    Add configure option macro to disable ISO8859-* fonts.
+
+commit cb284d5e05a4d62b070bb94624c2fb32c322e40d
+Author: Kevin E Martin <kem@kem.org>
+Date:   Wed Oct 19 02:48:08 2005 +0000
+
+    Update package version number for RC1 release.
+
+commit e096b243bb3be6a41bd928016d24acfe2cae677e
+Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
+Date:   Mon Oct 17 22:20:58 2005 +0000
+
+    Use sed to replace variables in man pages
+
+commit f45a6a9b5d53d91aec9ca0381311f5b0a4842c07
+Author: Kevin E Martin <kem@kem.org>
+Date:   Tue Oct 4 23:12:28 2005 +0000
+
+    Use CLEANFILES so that bdftruncate is rebuilt after make clean
+
+commit dd8c1045a1432cc31a7419eb45905282f3f065ea
+Author: Kevin E Martin <kem@kem.org>
+Date:   Fri Jul 29 21:22:49 2005 +0000
+
+    Various changes preparing packages for RC0:
+    - Verify and update package version numbers as needed
+    - Implement versioning scheme
+    - Change bug address to point to bugzilla bug entry form
+    - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to
+        reenable it)
+    - Fix makedepend to use pkgconfig and pass distcheck
+    - Update build script to build macros first
+    - Update modular Xorg version
+
+commit be020c6e52a9f087493122a59721366e3a2417f2
+Author: Kevin E Martin <kem@kem.org>
+Date:   Wed Jul 27 19:53:18 2005 +0000
+
+    Fix typo
+
+commit 854ba0573bbed8632f5a8adf93a497874e451d98
+Author: Kevin E Martin <kem@kem.org>
+Date:   Fri Jul 22 04:13:44 2005 +0000
+
+    Fix distcheck for fonts with multiple encodings
+
+commit ae573de21851d1e3ed27bc499ccff396cf9d4067
+Author: Alexander Gottwald <alexander.gottwald@s1999.tu-chemnitz.de>
+Date:   Fri Jul 15 12:39:39 2005 +0000
+
+    use bin_SCRIPTS for bdftruncate remove $(EXEEXT) from bdftruncate rule fix
+        bdftruncate rule to work with separate $(srcdir)
+
+commit 5b1ba00aa310ddac6fae4ba4bb50763e9fe7a292
+Author: Alan Coopersmith <Alan.Coopersmith@sun.com>
+Date:   Fri Jul 15 01:15:35 2005 +0000
+
+    Replace $< with portable construct
+
+commit 70e2335cc8e9f1c377a70880696ee2d83558456e
+Author: Kevin E Martin <kem@kem.org>
+Date:   Thu Jun 30 22:28:08 2005 +0000
+
+    Initial build system files for font module
+
+commit 8dbbdb2b6491edd6a0ec957d3a742802d2946fa3
+Author: Markus Kuhn <Markus.Kuhn@cl.cam.ac.uk>
+Date:   Sun Nov 28 19:06:20 2004 +0000
+
+    Updated 8859-7.TXT to ISO 8859-7:2003 (with euro sign) Updated obsolete
+        email address
+
+commit 5622b3c34465c8f7f83fe9fbab897fc7b438ef81
+Author: Egbert Eich <eich@suse.de>
+Date:   Thu Aug 26 11:58:06 2004 +0000
+
+    Fixed support for LynxOS 3.1 (LynxOS 4 will follow) (Thomas Mueller).
+    2
+
+commit edf6e4ce161fbf36a294f0947add0993bce2def6
+Author: Egbert Eich <eich@suse.de>
+Date:   Fri Apr 23 18:43:05 2004 +0000
+
+    Merging XORG-CURRENT into trunk
+
+commit efdd203d3b3f68f463b9aaf31ef60dd58170c327
+Author: Egbert Eich <eich@suse.de>
+Date:   Sun Mar 14 08:31:32 2004 +0000
+
+    Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004
+
+commit cada8e174bc996c693440605bc4778390a2525b4
+Author: Egbert Eich <eich@suse.de>
+Date:   Wed Mar 3 12:10:53 2004 +0000
+
+    Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004
+
+commit f5f59905ca85472432f99a82502e47827647cbd7
+Author: Egbert Eich <eich@suse.de>
+Date:   Thu Feb 26 13:35:11 2004 +0000
+
+    readding XFree86's cvs IDs
+
+commit 58fcd5a2cdba17e073e857283624d539758910a0
+Author: Egbert Eich <eich@suse.de>
+Date:   Thu Feb 26 09:22:24 2004 +0000
+
+    Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004
+
+commit c653490dc1a7fe5dbd4437800832474c2f3ddefd
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date:   Tue Nov 25 19:28:01 2003 +0000
+
+    XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks
+
+commit a3557f2e82e07580a5f7ceb41c49809a001b73e5
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date:   Tue Nov 25 19:28:01 2003 +0000
+
+    Initial revision
+
+commit ea7d5c737a21afcb846d4aeceb8741a44d7001da
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date:   Fri Nov 14 16:48:42 2003 +0000
+
+    XFree86 4.3.0.1
+
+commit 731ff0ca425ebc6b780199c58f11a63f24103567
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date:   Fri Nov 14 16:48:42 2003 +0000
+
+    Initial revision
diff --git a/xorg-server/fonts.src/font-util/Makefile.am b/xorg-server/fonts.src/font-util/Makefile.am
index d9d581bdd..fe23e3446 100644
--- a/xorg-server/fonts.src/font-util/Makefile.am
+++ b/xorg-server/fonts.src/font-util/Makefile.am
@@ -19,14 +19,12 @@
 #  NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 #  CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-bin_PROGRAMS = ucs2any
-bin_SCRIPTS = bdftruncate
+bin_PROGRAMS = bdftruncate ucs2any
 
-ucs2any_SOURCES = ucs2any.c
+AM_CFLAGS = $(CWARNFLAGS)
 
-bdftruncate: $(top_srcdir)/bdftruncate.pl
-	@rm -f $@
-	cp $(top_srcdir)/bdftruncate.pl $@
+ucs2any_SOURCES = ucs2any.c
+bdftruncate_SOURCES = bdftruncate.c
 
 aclocaldir = $(datadir)/aclocal
 aclocal_DATA = fontutil.m4
@@ -62,8 +60,6 @@ CLEANFILES = bdftruncate $(appman_DATA)
 
 EXTRA_DIST = $(mapfiles_DATA) \
 	$(appman_PRE) \
-	autogen.sh \
-	bdftruncate.pl \
 	fontutil.pc.in \
 	$(aclocal_DATA)
 
@@ -81,3 +77,13 @@ SUFFIXES = .$(APP_MAN_SUFFIX) .man
 
 .man.$(APP_MAN_SUFFIX):
 	sed $(MAN_SUBSTS) < $< > $@
+
+EXTRA_DIST += ChangeLog
+MAINTAINERCLEANFILES = ChangeLog
+
+.PHONY: ChangeLog
+
+ChangeLog:
+	$(CHANGELOG_CMD)
+
+dist-hook: ChangeLog
diff --git a/xorg-server/fonts.src/font-util/Makefile.in b/xorg-server/fonts.src/font-util/Makefile.in
index 5f1ee47bb..c79e7833b 100644
--- a/xorg-server/fonts.src/font-util/Makefile.in
+++ b/xorg-server/fonts.src/font-util/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -36,16 +36,11 @@
 #  CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
 
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -59,41 +54,42 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-bin_PROGRAMS = ucs2any$(EXEEXT)
+bin_PROGRAMS = bdftruncate$(EXEEXT) ucs2any$(EXEEXT)
+subdir = .
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(srcdir)/fontutil.pc.in $(top_srcdir)/configure AUTHORS \
 	COPYING ChangeLog INSTALL NEWS config.guess config.sub depcomp \
 	install-sh missing
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES = fontutil.pc
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
-	"$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(appmandir)" \
-	"$(DESTDIR)$(mapfilesdir)" "$(DESTDIR)$(pkgconfigdir)"
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(aclocaldir)" \
+	"$(DESTDIR)$(appmandir)" "$(DESTDIR)$(mapfilesdir)" \
+	"$(DESTDIR)$(pkgconfigdir)"
 binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
+am_bdftruncate_OBJECTS = bdftruncate.$(OBJEXT)
+bdftruncate_OBJECTS = $(am_bdftruncate_OBJECTS)
+bdftruncate_LDADD = $(LDADD)
 am_ucs2any_OBJECTS = ucs2any.$(OBJEXT)
 ucs2any_OBJECTS = $(am_ucs2any_OBJECTS)
 ucs2any_LDADD = $(LDADD)
-binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-SCRIPTS = $(bin_SCRIPTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
 LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(ucs2any_SOURCES)
-DIST_SOURCES = $(ucs2any_SOURCES)
+SOURCES = $(bdftruncate_SOURCES) $(ucs2any_SOURCES)
+DIST_SOURCES = $(bdftruncate_SOURCES) $(ucs2any_SOURCES)
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -118,12 +114,9 @@ am__remove_distdir = \
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 APP_MAN_DIR = @APP_MAN_DIR@
 APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
@@ -134,7 +127,10 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CHANGELOG_CMD = @CHANGELOG_CMD@
+CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CWARNFLAGS = @CWARNFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
@@ -143,9 +139,12 @@ DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
+EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -157,28 +156,29 @@ LIB_MAN_DIR = @LIB_MAN_DIR@
 LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
 MAPDIR = @MAPDIR@
 MISC_MAN_DIR = @MISC_MAN_DIR@
 MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -190,30 +190,44 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
+datarootdir = @datarootdir@
+distcleancheck_listfiles = @distcleancheck_listfiles@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
-bin_SCRIPTS = bdftruncate
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CFLAGS = $(CWARNFLAGS)
 ucs2any_SOURCES = ucs2any.c
+bdftruncate_SOURCES = bdftruncate.c
 aclocaldir = $(datadir)/aclocal
 aclocal_DATA = fontutil.m4
 mapfilesdir = @MAPDIR@
@@ -242,13 +256,8 @@ appmandir = $(APP_MAN_DIR)
 appman_PRE = bdftruncate.man ucs2any.man
 appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@)
 CLEANFILES = bdftruncate $(appman_DATA)
-EXTRA_DIST = $(mapfiles_DATA) \
-	$(appman_PRE) \
-	autogen.sh \
-	bdftruncate.pl \
-	fontutil.pc.in \
-	$(aclocal_DATA)
-
+EXTRA_DIST = $(mapfiles_DATA) $(appman_PRE) fontutil.pc.in \
+	$(aclocal_DATA) ChangeLog
 
 # Strings to replace in man pages
 XORGRELSTRING = @PACKAGE_STRING@
@@ -259,6 +268,7 @@ MAN_SUBSTS = \
         -e 's|__appmansuffix__|$(APP_MAN_SUFFIX)|g'
 
 SUFFIXES = .$(APP_MAN_SUFFIX) .man
+MAINTAINERCLEANFILES = ChangeLog
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-am
 
@@ -301,7 +311,7 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 config.h: stamp-h1
 	@if test ! -f $@; then \
 	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -318,7 +328,7 @@ fontutil.pc: $(top_builddir)/config.status $(srcdir)/fontutil.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
 	@list='$(bin_PROGRAMS)'; for p in $$list; do \
 	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
 	  if test -f $$p \
@@ -339,28 +349,12 @@ uninstall-binPROGRAMS:
 
 clean-binPROGRAMS:
 	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+bdftruncate$(EXEEXT): $(bdftruncate_OBJECTS) $(bdftruncate_DEPENDENCIES) 
+	@rm -f bdftruncate$(EXEEXT)
+	$(LINK) $(bdftruncate_OBJECTS) $(bdftruncate_LDADD) $(LIBS)
 ucs2any$(EXEEXT): $(ucs2any_OBJECTS) $(ucs2any_DEPENDENCIES) 
 	@rm -f ucs2any$(EXEEXT)
-	$(LINK) $(ucs2any_LDFLAGS) $(ucs2any_OBJECTS) $(ucs2any_LDADD) $(LIBS)
-install-binSCRIPTS: $(bin_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
-	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f $$d$$p; then \
-	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	    echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	    $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
-	  else :; fi; \
-	done
-
-uninstall-binSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	$(LINK) $(ucs2any_OBJECTS) $(ucs2any_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -368,25 +362,25 @@ mostlyclean-compile:
 distclean-compile:
 	-rm -f *.tab.c
 
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bdftruncate.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ucs2any.Po@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-uninstall-info-am:
 install-aclocalDATA: $(aclocal_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(aclocaldir)" || $(mkdir_p) "$(DESTDIR)$(aclocaldir)"
+	test -z "$(aclocaldir)" || $(MKDIR_P) "$(DESTDIR)$(aclocaldir)"
 	@list='$(aclocal_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -403,7 +397,7 @@ uninstall-aclocalDATA:
 	done
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(appmandir)" || $(mkdir_p) "$(DESTDIR)$(appmandir)"
+	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
 	@list='$(appman_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -420,7 +414,7 @@ uninstall-appmanDATA:
 	done
 install-mapfilesDATA: $(mapfiles_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(mapfilesdir)" || $(mkdir_p) "$(DESTDIR)$(mapfilesdir)"
+	test -z "$(mapfilesdir)" || $(MKDIR_P) "$(DESTDIR)$(mapfilesdir)"
 	@list='$(mapfiles_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -437,7 +431,7 @@ uninstall-mapfilesDATA:
 	done
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
 	@list='$(pkgconfig_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -458,8 +452,8 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
@@ -471,8 +465,8 @@ TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
@@ -482,13 +476,12 @@ ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$tags $$unique
@@ -503,24 +496,22 @@ distclean-tags:
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/.
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -531,10 +522,13 @@ distdir: $(DISTFILES)
 	    || exit 1; \
 	  fi; \
 	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -543,6 +537,10 @@ dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -570,6 +568,8 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -609,7 +609,7 @@ distcheck: dist
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
 	@cd $(distuninstallcheck_dir) \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -630,10 +630,10 @@ distcleancheck: distclean
 	       exit 1; } >&2
 check-am: all-am
 check: check-am
-all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(DATA) config.h
+all-am: Makefile $(PROGRAMS) $(DATA) config.h
 installdirs:
-	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(appmandir)" "$(DESTDIR)$(mapfilesdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(appmandir)" "$(DESTDIR)$(mapfilesdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -660,6 +660,7 @@ distclean-generic:
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 clean: clean-am
 
 clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
@@ -684,12 +685,20 @@ info-am:
 install-data-am: install-aclocalDATA install-appmanDATA \
 	install-mapfilesDATA install-pkgconfigDATA
 
-install-exec-am: install-binPROGRAMS install-binSCRIPTS
+install-dvi: install-dvi-am
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
 
 install-info: install-info-am
 
 install-man:
 
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -712,33 +721,40 @@ ps: ps-am
 ps-am:
 
 uninstall-am: uninstall-aclocalDATA uninstall-appmanDATA \
-	uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-info-am \
-	uninstall-mapfilesDATA uninstall-pkgconfigDATA
+	uninstall-binPROGRAMS uninstall-mapfilesDATA \
+	uninstall-pkgconfigDATA
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
 	clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \
-	dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-compile distclean-generic distclean-hdr \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-aclocalDATA \
-	install-am install-appmanDATA install-binPROGRAMS \
-	install-binSCRIPTS install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-mapfilesDATA install-pkgconfigDATA install-strip \
+	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-zip \
+	distcheck distclean distclean-compile distclean-generic \
+	distclean-hdr distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-aclocalDATA install-am install-appmanDATA \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-mapfilesDATA install-pdf install-pdf-am \
+	install-pkgconfigDATA install-ps install-ps-am install-strip \
 	installcheck installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
 	uninstall-aclocalDATA uninstall-am uninstall-appmanDATA \
-	uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-info-am \
-	uninstall-mapfilesDATA uninstall-pkgconfigDATA
+	uninstall-binPROGRAMS uninstall-mapfilesDATA \
+	uninstall-pkgconfigDATA
 
 
-bdftruncate: $(top_srcdir)/bdftruncate.pl
-	@rm -f $@
-	cp $(top_srcdir)/bdftruncate.pl $@
-
 .man.$(APP_MAN_SUFFIX):
 	sed $(MAN_SUBSTS) < $< > $@
+
+.PHONY: ChangeLog
+
+ChangeLog:
+	$(CHANGELOG_CMD)
+
+dist-hook: ChangeLog
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/fonts.src/font-util/README b/xorg-server/fonts.src/font-util/README
index e69de29bb..68f9af1ed 100644
--- a/xorg-server/fonts.src/font-util/README
+++ b/xorg-server/fonts.src/font-util/README
@@ -0,0 +1,25 @@
+X.Org font package creation/installation utilities
+
+All questions regarding this software should be directed at the
+Xorg mailing list:
+
+        http://lists.freedesktop.org/mailman/listinfo/xorg
+
+Please submit bug reports to the Xorg bugzilla:
+
+        https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
+
+The master development code repository can be found at:
+
+        git://anongit.freedesktop.org/git/xorg/font/util
+
+        http://cgit.freedesktop.org/xorg/font/util
+
+For patch submission instructions, see:
+
+	http://www.x.org/wiki/Development/Documentation/SubmittingPatches
+
+For more information on the git code manager, see:
+
+        http://wiki.x.org/wiki/GitPage
+
diff --git a/xorg-server/fonts.src/font-util/aclocal.m4 b/xorg-server/fonts.src/font-util/aclocal.m4
index a1bf8963d..4ae783a3d 100644
--- a/xorg-server/fonts.src/font-util/aclocal.m4
+++ b/xorg-server/fonts.src/font-util/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,35 +11,78 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-dnl $Id: xorg-macros.m4,v 1.8 2005/12/09 15:28:41 kem Exp $
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],,
+[m4_warning([this file was generated for autoconf 2.64.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+dnl xorg-macros.m4.  Generated from xorg-macros.m4.in xorgversion.m4 by configure.
 dnl
-dnl Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
-dnl 
-dnl Permission to use, copy, modify, distribute, and sell this software and its
-dnl documentation for any purpose is hereby granted without fee, provided that
-dnl the above copyright notice appear in all copies and that both that
-dnl copyright notice and this permission notice appear in supporting
-dnl documentation.
-dnl 
-dnl The above copyright notice and this permission notice shall be included
-dnl in all copies or substantial portions of the Software.
+dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
 dnl 
+dnl Permission is hereby granted, free of charge, to any person obtaining a
+dnl copy of this software and associated documentation files (the
+dnl "Software"), to deal in the Software without restriction, including
+dnl without limitation the rights to use, copy, modify, merge, publish,
+dnl distribute, and/or sell copies of the Software, and to permit persons
+dnl to whom the Software is furnished to do so, provided that the above
+dnl copyright notice(s) and this permission notice appear in all copies of
+dnl the Software and that both the above copyright notice(s) and this
+dnl permission notice appear in supporting documentation.
+dnl
 dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-dnl OTHER DEALINGS IN THE SOFTWARE.
-dnl 
-dnl Except as contained in this notice, the name of the copyright holders shall
-dnl not be used in advertising or otherwise to promote the sale, use or
-dnl other dealings in this Software without prior written authorization
-dnl from the copyright holders.
-dnl 
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of a copyright holder
+dnl shall not be used in advertising or otherwise to promote the sale, use
+dnl or other dealings in this Software without prior written authorization
+dnl of the copyright holder.
+
+# XORG_MACROS_VERSION(required-version)
+# -------------------------------------
+# Minimum version: 1.1.0
+#
+# If you're using a macro added in Version 1.1 or newer, include this in
+# your configure.ac with the minimum required version, such as:
+# XORG_MACROS_VERSION(1.1)
+#
+# To force at least a version with this macro defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+#
+#
+# See the "minimum version" comment for each macro you use to see what 
+# version you require.
+AC_DEFUN([XORG_MACROS_VERSION],[
+	[XORG_MACROS_needed_version=$1
+	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
+	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
+	AC_MSG_CHECKING([if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}])
+	[XORG_MACROS_version=1.2.1
+	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
+	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
+	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
+		AC_MSG_ERROR([configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x])
+	fi
+	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
+		AC_MSG_ERROR([configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer])
+	fi
+	AC_MSG_RESULT([yes, $XORG_MACROS_version])
+]) # XORG_MACROS_VERSION
 
 # XORG_PROG_RAWCPP()
 # ------------------
+# Minimum version: 1.0.0
+#
 # Find cpp program and necessary flags for use in pre-processing text files
 # such as man pages and config files
 AC_DEFUN([XORG_PROG_RAWCPP],[
@@ -58,6 +101,10 @@ else
 	if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
 		RAWCPPFLAGS=-undef
 		AC_MSG_RESULT([yes])
+	# under Cygwin unix is still defined even with -undef
+	elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
+		RAWCPPFLAGS="-undef -ansi"
+		AC_MSG_RESULT([yes, with -ansi])
 	else
 		AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef.  I don't know what to do.])
 	fi
@@ -82,6 +129,8 @@ AC_SUBST(RAWCPPFLAGS)
 
 # XORG_MANPAGE_SECTIONS()
 # -----------------------
+# Minimum version: 1.0.0
+#
 # Determine which sections man pages go in for the different man page types
 # on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
 # Not sure if there's any better way than just hardcoding by OS name.
@@ -91,75 +140,47 @@ AC_DEFUN([XORG_MANPAGE_SECTIONS],[
 AC_REQUIRE([AC_CANONICAL_HOST])
 
 if test x$APP_MAN_SUFFIX = x    ; then
-    case $host_os in
-	linux*)	APP_MAN_SUFFIX=1x ;;
-	*)	APP_MAN_SUFFIX=1  ;;
-    esac
+    APP_MAN_SUFFIX=1
 fi
 if test x$APP_MAN_DIR = x    ; then
-    case $host_os in
-	linux*)	APP_MAN_DIR='$(mandir)/man1' ;;
-	*)	APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)' ;;
-    esac
+    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
 fi
 
 if test x$LIB_MAN_SUFFIX = x    ; then
-    case $host_os in
-	linux*)	LIB_MAN_SUFFIX=3x ;;
-	*)	LIB_MAN_SUFFIX=3  ;;
-    esac
+    LIB_MAN_SUFFIX=3
 fi
 if test x$LIB_MAN_DIR = x    ; then
-    case $host_os in
-	linux*)	LIB_MAN_DIR='$(mandir)/man3' ;;
-	*)	LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)' ;;
-    esac
+    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
 fi
 
 if test x$FILE_MAN_SUFFIX = x    ; then
     case $host_os in
-	linux*)		FILE_MAN_SUFFIX=5x ;;
 	solaris*)	FILE_MAN_SUFFIX=4  ;;
 	*)		FILE_MAN_SUFFIX=5  ;;
     esac
 fi
 if test x$FILE_MAN_DIR = x    ; then
-    case $host_os in
-	linux*)	FILE_MAN_DIR='$(mandir)/man5' ;;
-	*)	FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)' ;;
-    esac
+    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
 fi
 
-# In Imake's linux.cf, the misc man suffix & dir was only changed for 
-# LinuxDebian, not other Linuxes, so we leave it unchanged here
 if test x$MISC_MAN_SUFFIX = x    ; then
     case $host_os in
-#	linux*)		MISC_MAN_SUFFIX=7x ;;
 	solaris*)	MISC_MAN_SUFFIX=5  ;;
 	*)		MISC_MAN_SUFFIX=7  ;;
     esac
 fi
 if test x$MISC_MAN_DIR = x    ; then
-    case $host_os in
-#	linux*)	MISC_MAN_DIR='$(mandir)/man7' ;;
-	*)	MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)' ;;
-    esac
+    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
 fi
 
-# In Imake's linux.cf, the driver man suffix & dir was only changed for 
-# LinuxDebian, not other Linuxes, so we leave it unchanged here
 if test x$DRIVER_MAN_SUFFIX = x    ; then
     case $host_os in
-#	linux*)		DRIVER_MAN_SUFFIX=4x ;;
 	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
 	*)		DRIVER_MAN_SUFFIX=4  ;;
     esac
 fi
 if test x$DRIVER_MAN_DIR = x    ; then
-    case $host_os in
-#	linux*)	DRIVER_MAN_DIR='$(mandir)/man4' ;;
-	*)	DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)' ;;
-    esac
+    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
 fi
 
 if test x$ADMIN_MAN_SUFFIX = x    ; then
@@ -189,23 +210,30 @@ AC_SUBST([ADMIN_MAN_DIR])
 
 # XORG_CHECK_LINUXDOC
 # -------------------
+# Minimum version: 1.0.0
+#
 # Defines the variable MAKE_TEXT if the necessary tools and
 # files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
 # Whether or not the necessary tools and files are found can be checked
 # with the AM_CONDITIONAL "BUILD_LINUXDOC"
 AC_DEFUN([XORG_CHECK_LINUXDOC],[
-AC_CHECK_FILE(
-	[$prefix/share/X11/sgml/defs.ent], 
-	[DEFS_ENT_PATH=$prefix/share/X11/sgml],
-	[DEFS_ENT_PATH=]
-)
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+
+if test x"$cross_compiling" = x"yes" ; then
+  HAVE_DEFS_ENT=no
+else
+  AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+fi
 
 AC_PATH_PROG(LINUXDOC, linuxdoc)
 AC_PATH_PROG(PS2PDF, ps2pdf)
 
 AC_MSG_CHECKING([Whether to build documentation])
 
-if test x$DEFS_ENT_PATH != x && test x$LINUXDOC != x ; then
+if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
    BUILDDOC=yes
 else
    BUILDDOC=no
@@ -217,7 +245,7 @@ AC_MSG_RESULT([$BUILDDOC])
 
 AC_MSG_CHECKING([Whether to build pdf documentation])
 
-if test x$PS2PDF != x ; then
+if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
    BUILDPDFDOC=yes
 else
    BUILDPDFDOC=no
@@ -227,10 +255,10 @@ AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
 
 AC_MSG_RESULT([$BUILDPDFDOC])
 
-MAKE_TEXT="SGML_SEARCH_PATH=$DEFS_ENT_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
-MAKE_PS="SGML_SEARCH_PATH=$DEFS_ENT_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
 MAKE_PDF="$PS2PDF"
-MAKE_HTML="SGML_SEARCH_PATH=$DEFS_ENT_PATH $LINUXDOC  -B html --split=0"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC  -B html --split=0"
 
 AC_SUBST(MAKE_TEXT)
 AC_SUBST(MAKE_PS)
@@ -238,8 +266,78 @@ AC_SUBST(MAKE_PDF)
 AC_SUBST(MAKE_HTML)
 ]) # XORG_CHECK_LINUXDOC
 
+# XORG_CHECK_DOCBOOK
+# -------------------
+# Minimum version: 1.0.0
+#
+# Checks for the ability to build output formats from SGML DocBook source.
+# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
+# indicates whether the necessary tools and files are found and, if set,
+# $(MAKE_XXX) blah.sgml will produce blah.xxx.
+AC_DEFUN([XORG_CHECK_DOCBOOK],[
+if test x$XORG_SGML_PATH = x ; then
+    XORG_SGML_PATH=$prefix/share/sgml
+fi
+HAVE_DEFS_ENT=
+BUILDTXTDOC=no
+BUILDPDFDOC=no
+BUILDPSDOC=no
+BUILDHTMLDOC=no
+
+AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+
+AC_PATH_PROG(DOCBOOKPS, docbook2ps)
+AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
+AC_PATH_PROG(DOCBOOKHTML, docbook2html)
+AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
+
+AC_MSG_CHECKING([Whether to build text documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
+   test x$BUILD_TXTDOC != xno; then
+	BUILDTXTDOC=yes
+fi
+AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
+AC_MSG_RESULT([$BUILDTXTDOC])
+
+AC_MSG_CHECKING([Whether to build PDF documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
+   test x$BUILD_PDFDOC != xno; then
+	BUILDPDFDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+AC_MSG_CHECKING([Whether to build PostScript documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
+   test x$BUILD_PSDOC != xno; then
+	BUILDPSDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
+AC_MSG_RESULT([$BUILDPSDOC])
+
+AC_MSG_CHECKING([Whether to build HTML documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
+   test x$BUILD_HTMLDOC != xno; then
+	BUILDHTMLDOC=yes
+fi
+AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
+AC_MSG_RESULT([$BUILDHTMLDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
+MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_DOCBOOK
+
 # XORG_CHECK_MALLOC_ZERO
 # ----------------------
+# Minimum version: 1.0.0
+#
 # Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
 # malloc(0) returns NULL.  Packages should add one of these cflags to
 # their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
@@ -284,6 +382,103 @@ AC_SUBST([XMALLOC_ZERO_CFLAGS])
 AC_SUBST([XTMALLOC_ZERO_CFLAGS])
 ]) # XORG_CHECK_MALLOC_ZERO
 
+# XORG_WITH_LINT()
+# ----------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for source checkers such as lint and sparse if --with-lint
+# is specified.   (Use --with-lint=sparse for sparse.)
+# Sets $LINT to name of source checker passed with --with-lint (default: lint)
+# Sets $LINT_FLAGS to flags to pass to source checker
+# Sets LINT automake conditional if enabled (default: disabled)
+#
+AC_DEFUN([XORG_WITH_LINT],[
+
+# Allow checking code with lint, sparse, etc.
+AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
+		[Use a lint-style source code checker (default: disabled)])],
+		[use_lint=$withval], [use_lint=no])
+if test "x$use_lint" = "xyes" ; then
+	LINT="lint"
+else
+	LINT="$use_lint"
+fi
+if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
+    case $LINT in
+	lint|*/lint)
+	    case $host_os in
+		solaris*)
+			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
+			;;
+	    esac
+	    ;;
+    esac
+fi
+
+AC_SUBST(LINT)
+AC_SUBST(LINT_FLAGS)
+AM_CONDITIONAL(LINT, [test x$LINT != xno])
+
+]) # XORG_WITH_LINT
+
+# XORG_LINT_LIBRARY(LIBNAME)
+# --------------------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for building lint libraries for checking programs that call
+# functions in the library.
+# Disabled by default, enable with --enable-lint-library
+# Sets: 
+#	@LINTLIB@		- name of lint library file to make
+#	MAKE_LINT_LIB		- automake conditional
+#
+
+AC_DEFUN([XORG_LINT_LIBRARY],[
+AC_REQUIRE([XORG_WITH_LINT])
+# Build lint "library" for more indepth checks of programs calling this library
+AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
+	[Create lint library (default: disabled)])],
+	[make_lint_lib=$enableval], [make_lint_lib=no])
+if test "x$make_lint_lib" != "xno" ; then
+	if test "x$LINT" = "xno" ; then
+		AC_MSG_ERROR([Cannot make lint library without --with-lint])
+	fi
+	if test "x$make_lint_lib" = "xyes" ; then
+		LINTLIB=llib-l$1.ln
+	else
+		LINTLIB=$make_lint_lib
+	fi
+fi
+AC_SUBST(LINTLIB)
+AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
+
+]) # XORG_LINT_LIBRARY
+
+# XORG_CWARNFLAGS
+# ---------------
+# Minimum version: 1.2.0
+#
+# Defines CWARNFLAGS to enable C compiler warnings.
+#
+AC_DEFUN([XORG_CWARNFLAGS], [
+AC_REQUIRE([AC_PROG_CC])
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `gcc -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS+=" -Wold-style-definition -Wdeclaration-after-statement"
+	;;
+    esac
+else
+    AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
+    fi
+fi
+AC_SUBST(CWARNFLAGS)
+]) # XORG_CWARNFLAGS
 dnl Copyright 2005 Red Hat, Inc
 dnl
 dnl Permission to use, copy, modify, distribute, and sell this software and its
@@ -313,7 +508,8 @@ dnl
 # --------------------
 # Adds --with/without-release-string and changes the PACKAGE and
 # PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION".  If
-# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.
+# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged.  Also
+# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
  
 AC_DEFUN([XORG_RELEASE_VERSION],[
 	AC_ARG_WITH(release-version,
@@ -326,9 +522,43 @@ AC_DEFUN([XORG_RELEASE_VERSION],[
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
 		AC_MSG_NOTICE([Building with package name set to $PACKAGE])
 	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
+		[`echo $PACKAGE_VERSION | cut -d . -f 1`],
+		[Major version of this package])
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
+	if test "x$PVM" = "x"; then
+		PVM="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
+		[$PVM],
+		[Minor version of this package])
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
+	if test "x$PVP" = "x"; then
+		PVP="0"
+	fi
+	AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
+		[$PVP],
+		[Patch version of this package])
 ])
 
-# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
+# XORG_CHANGELOG()
+# ----------------
+# Minimum version: 1.2.0
+#
+# Defines the variable CHANGELOG_CMD as the command to generate
+# ChangeLog from git.
+#
+# Arrange that distcleancheck ignores ChangeLog left over by distclean.
+#
+AC_DEFUN([XORG_CHANGELOG], [
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+AC_SUBST([CHANGELOG_CMD])
+AC_SUBST([distcleancheck_listfiles], ['find . -type f ! -name ChangeLog -print'])
+]) # XORG_CHANGELOG
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -338,14 +568,31 @@ AC_DEFUN([XORG_RELEASE_VERSION],[
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.10.2], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
 
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.6])])
+[AM_AUTOMAKE_VERSION([1.10.2])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -402,14 +649,14 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 7
+# serial 8
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -418,8 +665,10 @@ AC_DEFUN([AM_CONDITIONAL],
 [AC_PREREQ(2.52)dnl
  ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
 	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
@@ -433,15 +682,14 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 8
+# serial 9
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -469,6 +717,7 @@ AC_REQUIRE([AM_DEP_TRACK])dnl
 ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
        [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
        [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
        [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                    [depcc="$$1"   am_compiler_list=])
 
@@ -534,6 +783,7 @@ AC_CACHE_CHECK([dependency style of $depcc],
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
        $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -586,24 +836,34 @@ if test "x$enable_dependency_tracking" != xno; then
   AMDEPBACKSLASH='\'
 fi
 AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
 ])
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 3
+#serial 4
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
+[# Autoconf 2.62 quotes --file arguments for eval, but not when files
+# are listed without --file.  Let's play safe and only enable the eval
+# if we detect the quoting.
+case $CONFIG_FILES in
+*\'*) eval set x "$CONFIG_FILES" ;;
+*)   set x $CONFIG_FILES ;;
+esac
+shift
+for mf
+do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -611,8 +871,9 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
   # some people rename them; so instead we look at the file content.
   # Grep'ing the first line is not enough: some people post-process
   # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+  # Grep'ing the whole file is not good either: AIX grep has a line
+  # limit of 2048, but all sed's we know have understand at least 4000.
+  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
     dirpart=`AS_DIRNAME("$mf")`
   else
     continue
@@ -671,14 +932,14 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 12
+# serial 13
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -695,16 +956,20 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.60])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
 AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
 fi
 
 # test whether we have cygpath
@@ -724,6 +989,9 @@ m4_ifval([$2],
  AC_SUBST([PACKAGE], [$1])dnl
  AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
  AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
  AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 
@@ -759,6 +1027,10 @@ AC_PROVIDE_IFELSE([AC_PROG_CXX],
                   [_AM_DEPENDENCIES(CXX)],
                   [define([AC_PROG_CXX],
                           defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+                  [_AM_DEPENDENCIES(OBJC)],
+                  [define([AC_PROG_OBJC],
+                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
 ])
 
@@ -772,16 +1044,17 @@ AC_PROVIDE_IFELSE([AC_PROG_CXX],
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
+_am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
@@ -794,7 +1067,7 @@ echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
 AC_SUBST(install_sh)])
 
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
@@ -901,14 +1174,14 @@ rm -f confinc confmf
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -924,6 +1197,7 @@ AC_SUBST($1)])
 # If it does, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
 test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
@@ -934,7 +1208,7 @@ else
 fi
 ])
 
-# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -942,70 +1216,33 @@ fi
 
 # AM_PROG_MKDIR_P
 # ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake.  There are at least two reasons why we must not
-# use `-m 0755':
-#   - it causes special bits like SGID to be ignored,
-#   - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out.  Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
 AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
-  else
-    mkdir_p='$(install_sh) -d'
-  fi
-fi
-AC_SUBST([mkdir_p])])
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -1022,7 +1259,7 @@ AC_DEFUN([_AM_SET_OPTION],
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
@@ -1107,9 +1344,21 @@ dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
 if test "$cross_compiling" != no; then
   AC_CHECK_TOOL([STRIP], [strip], :)
 fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
+# Copyright (C) 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
 # Check how to create a tarball.                            -*- Autoconf -*-
 
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.
diff --git a/xorg-server/fonts.src/font-util/bdftruncate.c b/xorg-server/fonts.src/font-util/bdftruncate.c
new file mode 100644
index 000000000..9bb204b31
--- /dev/null
+++ b/xorg-server/fonts.src/font-util/bdftruncate.c
@@ -0,0 +1,222 @@
+/*-
+ * Copyright (c) 2006 Martin Husemann.
+ * Copyright (c) 2007 Joerg Sonnenberger.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. The name of the author may not be used to endorse or promote
+ *    products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This program is derived (in a straight forward way) from
+ * bdftruncate.pl -- Markus Kuhn <http://www.cl.cam.ac.uk/~mgk25/>
+ *
+ * This utility allows you to generate from an ISO10646-1 encoded
+ * BDF font other ISO10646-1 BDF fonts in which all characters above
+ * a threshold code value are stored unencoded.
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static int iswide(unsigned int);
+static void usage(void);
+
+static int opt_minus_w;
+static int opt_plus_w;
+static int removewide;
+static unsigned long threshold;
+
+static int
+parse_threshold(const char *str)
+{
+	int base;
+	char *end_ptr;
+
+	if (!isdigit((unsigned char)*str))
+		return 1;
+	if (str[0] == 0 && (str[1] == 'x' || str[1] == 'X'))
+		base = 16;
+	else
+		base = 10;
+
+	errno = 0;
+	threshold = strtoul(str, &end_ptr, base);
+	if (errno != 0 || threshold == 0)
+		return 1;
+	return 0;
+}
+
+static void
+process_line(const char *line)
+{
+	if (strncmp(line, "ENCODING", 8) == 0) {
+		unsigned long enc;
+		const char *v;
+
+		v = line + 9;
+
+		while (*v && isspace((unsigned char)(*v)))
+			++v;
+		enc = strtoul(v, NULL, 10);
+		/* XXX Check for line-ending? */
+		if (enc >= threshold || (removewide && iswide(enc))) {
+			printf("ENCODING -1\n");
+		} else {
+			fputs(line, stdout);
+		}
+		return;
+	}
+	if (strncmp(line, "STARTFONT", 9) == 0) {
+		fputs(line, stdout);
+		printf("COMMENT AUTOMATICALLY GENERATED FILE. DO NOT EDIT!\n"
+		    "COMMENT In this version of the font file, "
+		    "all characters >= U+%04lx are\n"
+		    "COMMENT not encoded to keep XFontStruct small.\n",
+		    threshold);
+		return;
+	}
+	if (strncmp(line, "COMMENT", 7) == 0) {
+		const char *v = line + 8;
+
+		while (*v && isspace((unsigned char)(*v)))
+			v++;
+		if (strncmp(v, "$id: ", 5) == 0 ||
+		    strncmp(v, "$Id: ", 5) == 0) {
+		    	const char *id = strchr(v+1, '$');
+		    	if (id) {
+		    		printf("COMMENT Derived from %.*s",
+				     (int)(id - v - 4), v + 5);
+				return;
+		    	}
+		}
+	}
+	fputs(line, stdout);
+}
+
+int
+main(int argc, char **argv)
+{
+	int removewide;
+	char *line, *input_ptr;
+	size_t line_len, rest_len;
+
+	--argc;
+	++argv;
+	if (argc == 0)
+		usage();
+
+	if (strcmp(*argv, "-w") == 0 || strcmp(*argv, "+w") == 0) {
+		if (**argv == '-')
+			opt_minus_w = 1;
+		else
+			opt_plus_w = 1;
+		--argc;
+		++argv;
+	}
+
+	if (argc != 1 || (opt_plus_w && opt_minus_w))
+		usage();
+	if (parse_threshold(*argv)) {
+		fprintf(stderr, "Illegal threshold %s", *argv);
+		usage();
+	}
+
+	if (opt_minus_w)
+		removewide = 1;
+	else if (opt_plus_w)
+		removewide = 0;
+	else
+		removewide = (threshold <= 0x3200);
+
+	line_len = 1024;
+	if ((line = malloc(line_len)) == NULL) {
+		fprintf(stderr, "malloc failed");
+		exit(EXIT_FAILURE);
+	}
+
+	for (;;) {
+		if (fgets(line, line_len, stdin) == NULL)
+		     break;
+		while (strlen(line) == line_len - 1 && !feof(stdin)) {
+			if (line_len > SSIZE_MAX) {
+				fprintf(stderr, "input line too large");
+				exit(EXIT_FAILURE);
+			}
+			line = realloc(line, line_len * 2);
+			if (line == NULL) {
+				fprintf(stderr, "realloc failed");
+				exit(EXIT_FAILURE);
+			}
+			input_ptr = line + line_len - 1;
+			rest_len = line_len + 1;
+			line_len *= 2;
+			if (fgets(input_ptr, rest_len, stdin) == NULL) {
+				/* Should not happen, but handle as EOF */
+				break;
+			}
+		}
+		process_line(line);
+	}
+
+	return EXIT_SUCCESS;
+}
+
+/*
+ * Subroutine to identify whether the ISO 10646/Unicode character code
+ * ucs belongs into the East Asian Wide (W) or East Asian FullWidth
+ * (F) category as defined in Unicode Technical Report #11.
+ */
+static int
+iswide(unsigned int ucs)
+{
+    return (ucs >= 0x1100 &&
+            (ucs <= 0x115f ||                   /* Hangul Jamo */
+             (ucs >= 0x2e80 && ucs <= 0xa4cf &&
+              (ucs & ~0x0011) != 0x300a && ucs != 0x303f) || /* CJK .. Yi */
+             (ucs >= 0xac00 && ucs <= 0xd7a3) || /* Hangul Syllables */
+             (ucs >= 0xf900 && ucs <= 0xfaff) || /* CJK Comp. Ideographs */
+             (ucs >= 0xfe30 && ucs <= 0xfe6f) || /* CJK Comp. Forms */
+             (ucs >= 0xff00 && ucs <= 0xff5f) || /* Fullwidth Forms */
+             (ucs >= 0xffe0 && ucs <= 0xffe6) ||
+             (ucs >= 0x20000 && ucs <= 0x2ffff)));
+}
+
+static void
+usage(void)
+{
+	fprintf(stderr,
+	    "Usage: bdftruncate [+w|-w] threshold <source.bdf >destination.bdf\n"
+	    "\n"
+	    "Example:\n"
+	    "\n"
+	    "  bdftruncate 0x3200 <6x13.bdf >6x13t.bdf\n"
+	    "\n"
+	    "will generate the file 6x13t.bdf in which all glyphs with codes\n"
+	    ">= 0x3200 will only be stored unencoded (i.e., ENCODING -1).\n"
+	    "Option -w removes East Asian Wide and East Asian FullWidth characters\n"
+	    "(default if threshold <= 0x3200), and option +w keeps them.\n");
+	exit(EXIT_FAILURE);
+}
diff --git a/xorg-server/fonts.src/font-util/config.guess b/xorg-server/fonts.src/font-util/config.guess
index 917bbc50f..e3a2116a7 100644
--- a/xorg-server/fonts.src/font-util/config.guess
+++ b/xorg-server/fonts.src/font-util/config.guess
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   Free Software Foundation, Inc.
 
-timestamp='2005-07-08'
+timestamp='2009-06-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -55,8 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -106,7 +107,7 @@ set_cc_for_build='
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
  { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
@@ -160,6 +161,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -168,7 +170,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
+			| grep -q __ELF__
 		then
 		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
 		    # Return netbsd for either.  FIX?
@@ -206,8 +208,11 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
     macppc:MirBSD:*:*)
-	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -319,14 +324,30 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	case `/usr/bin/uname -p` in
 	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
@@ -527,7 +548,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[45])
+    *:AIX:*:[456])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -635,7 +656,7 @@ EOF
 	    # => hppa64-hp-hpux11.23
 
 	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep __LP64__ >/dev/null
+		grep -q __LP64__
 	    then
 		HP_ARCH="hppa2.0w"
 	    else
@@ -764,12 +785,19 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
-    i*:MINGW*:*)
+    *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
     i*:windows32*:*)
@@ -779,12 +807,24 @@ EOF
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    x86:Interix*:[34]*)
-	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
-	exit ;;
+    *:Interix*:[3456]*)
+    	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    EM64T | authenticamd | genuineintel)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
@@ -794,7 +834,7 @@ EOF
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
 	exit ;;
-    amd64:CYGWIN*:*:*)
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
 	echo x86_64-unknown-cygwin
 	exit ;;
     p*:CYGWIN*:*)
@@ -815,6 +855,16 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
@@ -835,44 +885,32 @@ EOF
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    mips:Linux:*:*)
+    mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#undef CPU
-	#undef mips
-	#undef mipsel
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
 	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
+	CPU=${UNAME_MACHINE}el
 	#else
 	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
+	CPU=${UNAME_MACHINE}
 	#else
 	CPU=
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
     ppc:Linux:*:*)
 	echo powerpc-unknown-linux-gnu
 	exit ;;
@@ -889,10 +927,13 @@ EOF
 	  EV67)  UNAME_MACHINE=alphaev67 ;;
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
         esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	objdump --private-headers /bin/sh | grep -q ld.so.1
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -916,9 +957,15 @@ EOF
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
 	exit ;;
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -934,17 +981,6 @@ EOF
 	  elf32-i386)
 		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
 		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
@@ -961,7 +997,7 @@ EOF
 	LIBC=gnulibc1
 	# endif
 	#else
-	#ifdef __INTEL_COMPILER
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
@@ -971,7 +1007,11 @@ EOF
 	LIBC=dietlibc
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^LIBC/{
+		s: ::g
+		p
+	    }'`"
 	test x"${LIBC}" != x && {
 		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 		exit
@@ -1006,7 +1046,7 @@ EOF
     i*86:syllable:*:*)
 	echo ${UNAME_MACHINE}-pc-syllable
 	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
     i*86:*DOS:*:*)
@@ -1050,8 +1090,11 @@ EOF
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
+        # the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
         exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
@@ -1089,6 +1132,16 @@ EOF
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
           && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
@@ -1101,7 +1154,7 @@ EOF
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
     SM[BE]S:UNIX_SV:*:*)
@@ -1164,6 +1217,9 @@ EOF
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
 	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1173,6 +1229,15 @@ EOF
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
 	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1182,7 +1247,6 @@ EOF
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
 	case $UNAME_PROCESSOR in
-	    *86) UNAME_PROCESSOR=i686 ;;
 	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
@@ -1261,6 +1325,12 @@ EOF
     i*86:skyos:*:*)
 	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
 	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1421,9 +1491,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be
diff --git a/xorg-server/fonts.src/font-util/config.h.in b/xorg-server/fonts.src/font-util/config.h.in
index c364eda45..7c9cfb1c0 100644
--- a/xorg-server/fonts.src/font-util/config.h.in
+++ b/xorg-server/fonts.src/font-util/config.h.in
@@ -1,5 +1,32 @@
 /* config.h.in.  Generated from configure.ac by autoheader.  */
 
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
 /* Name of package */
 #undef PACKAGE
 
@@ -15,8 +42,23 @@
 /* Define to the one symbol short name of this package. */
 #undef PACKAGE_TARNAME
 
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
 /* Define to the version of this package. */
 #undef PACKAGE_VERSION
 
+/* Major version of this package */
+#undef PACKAGE_VERSION_MAJOR
+
+/* Minor version of this package */
+#undef PACKAGE_VERSION_MINOR
+
+/* Patch version of this package */
+#undef PACKAGE_VERSION_PATCHLEVEL
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
 /* Version number of package */
 #undef VERSION
diff --git a/xorg-server/fonts.src/font-util/config.sub b/xorg-server/fonts.src/font-util/config.sub
index 1c366dfde..eb0389a69 100644
--- a/xorg-server/fonts.src/font-util/config.sub
+++ b/xorg-server/fonts.src/font-util/config.sub
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   Free Software Foundation, Inc.
 
-timestamp='2005-07-08'
+timestamp='2009-06-11'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -71,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -119,8 +120,10 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
-  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -150,6 +153,9 @@ case $os in
 		os=
 		basic_machine=$1
 		;;
+        -bluegene*)
+	        os=-cnk
+		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
 		basic_machine=$1
@@ -171,6 +177,10 @@ case $os in
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -187,6 +197,10 @@ case $os in
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -231,20 +245,24 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
+	| mips64octeon | mips64octeonel \
 	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
@@ -257,26 +275,26 @@ case $basic_machine in
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
-	| ms1 \
+	| moxie \
+	| mt \
 	| msp430 \
+	| nios | nios2 \
 	| ns16k | ns32k \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b \
-	| strongarm \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k)
-		basic_machine=$basic_machine-unknown
-		;;
-	m32c)
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
@@ -286,6 +304,9 @@ case $basic_machine in
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -305,25 +326,28 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
+	| avr-* | avr32-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* | m32rle-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
+	| mips64octeon-* | mips64octeonel-* \
 	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
@@ -336,30 +360,33 @@ case $basic_machine in
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
-	| ms1-* \
+	| mt-* \
 	| msp430-* \
+	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
-	| z8k-*)
+	| z8k-* | z80-*)
 		;;
-	m32c-*)
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -423,6 +450,10 @@ case $basic_machine in
 		basic_machine=m68k-apollo
 		os=-bsd
 		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -431,10 +462,26 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
+        cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -463,8 +510,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
-		basic_machine=cr16c-unknown
+	cr16)
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -502,6 +549,10 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
 	djgpp)
 		basic_machine=i586-pc
 		os=-msdosdjgpp
@@ -656,6 +707,14 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -671,6 +730,10 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -696,6 +759,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -794,6 +860,14 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -803,6 +877,12 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -859,6 +939,10 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -885,6 +969,10 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -896,6 +984,9 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@@ -985,6 +1076,10 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1060,6 +1155,10 @@ case $basic_machine in
 		basic_machine=z8k-unknown
 		os=-sim
 		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1098,10 +1197,10 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1168,27 +1267,30 @@ case $os in
 	# Each alternative MUST END IN A *, to match a version number.
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
+	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1318,6 +1420,9 @@ case $os in
 	-zvmoe)
 		os=-zvmoe
 		;;
+	-dicos*)
+		os=-dicos
+		;;
 	-none)
 		;;
 	*)
@@ -1340,6 +1445,12 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1349,9 +1460,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-    c4x-* | tic4x-*)
-        os=-coff
-        ;;
+        c4x-* | tic4x-*)
+        	os=-coff
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1377,6 +1488,9 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;
@@ -1506,7 +1620,7 @@ case $basic_machine in
 			-sunos*)
 				vendor=sun
 				;;
-			-aix*)
+			-cnk*|-aix*)
 				vendor=ibm
 				;;
 			-beos*)
diff --git a/xorg-server/fonts.src/font-util/configure b/xorg-server/fonts.src/font-util/configure
index 0691bbf55..fa7b21f52 100644
--- a/xorg-server/fonts.src/font-util/configure
+++ b/xorg-server/fonts.src/font-util/configure
@@ -1,83 +1,417 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for font-util 1.0.1.
+# Generated by GNU Autoconf 2.64 for font-util 1.0.2.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
 
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
 else
-  as_unset=false
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
   else
-    $as_unset $as_var
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
+$0: about your system, including any error possibly output
+$0: before this message. Then install a modern shell, or
+$0: manually run the script under such a shell if you do
+$0: have one."
   fi
-done
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
 fi
 
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-# PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
@@ -85,146 +419,107 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
 
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
 else
-  as_expr=false
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
 fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -233,52 +528,202 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
+exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
-exec 6>&1
-
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_clean_files=
 ac_config_libobj_dir=.
+LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
 
 # Identity of this package.
 PACKAGE_NAME='font-util'
 PACKAGE_TARNAME='font-util'
-PACKAGE_VERSION='1.0.1'
-PACKAGE_STRING='font-util 1.0.1'
+PACKAGE_VERSION='1.0.2'
+PACKAGE_STRING='font-util 1.0.2'
 PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
+PACKAGE_URL=''
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE MAPDIR build build_cpu build_vendor build_os host host_cpu host_vendor host_os APP_MAN_SUFFIX LIB_MAN_SUFFIX FILE_MAN_SUFFIX MISC_MAN_SUFFIX DRIVER_MAN_SUFFIX ADMIN_MAN_SUFFIX APP_MAN_DIR LIB_MAN_DIR FILE_MAN_DIR MISC_MAN_DIR DRIVER_MAN_DIR ADMIN_MAN_DIR LIBOBJS LTLIBOBJS'
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+distcleancheck_listfiles
+CHANGELOG_CMD
+ADMIN_MAN_DIR
+DRIVER_MAN_DIR
+MISC_MAN_DIR
+FILE_MAN_DIR
+LIB_MAN_DIR
+APP_MAN_DIR
+ADMIN_MAN_SUFFIX
+DRIVER_MAN_SUFFIX
+MISC_MAN_SUFFIX
+FILE_MAN_SUFFIX
+LIB_MAN_SUFFIX
+APP_MAN_SUFFIX
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+MAPDIR
+CWARNFLAGS
+EGREP
+GREP
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_dependency_tracking
+with_mapdir
+with_release_version
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
 
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -301,34 +746,48 @@ x_libraries=NONE
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -350,33 +809,59 @@ do
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
     datadir=$ac_optarg ;;
 
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -403,6 +888,12 @@ do
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -427,13 +918,16 @@ do
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -498,6 +992,16 @@ do
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -548,26 +1052,36 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "with_$ac_package='$ac_optarg'" ;;
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -587,26 +1101,25 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
+  -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
     ;;
 
   *=*)
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
@@ -615,31 +1128,36 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "missing argument to $ac_option"
 fi
 
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
-done
+fi
 
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  eval ac_val=$`echo $ac_var`
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
   case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
   esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -653,7 +1171,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -666,70 +1184,72 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias-
 test "$silent" = yes && exec 6>/dev/null
 
 
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error "pwd does not report name of working directory"
+
+
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
+  if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
 
 #
 # Report the --help message.
@@ -738,7 +1258,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures font-util 1.0.1 to adapt to many kinds of systems.
+\`configure' configures font-util 1.0.2 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -758,14 +1278,11 @@ Configuration:
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
-_ACEOF
-
-  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -775,18 +1292,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/font-util]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -804,11 +1328,12 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of font-util 1.0.1:";;
+     short | recursive ) echo "Configuration of font-util 1.0.2:";;
    esac
   cat <<\_ACEOF
 
 Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-maintainer-mode  enable make rules and dependencies not useful
@@ -819,7 +1344,8 @@ Optional Features:
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-mapdir=MAPDIR    Path to install font maps
+  --with-mapdir=<pathname>
+                          Path to install font maps
   --with-release-version=STRING
                           Use release version string in package name
 
@@ -828,128 +1354,288 @@ Some influential environment variables:
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
 
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 _ACEOF
+ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
   done
 fi
 
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-font-util configure 1.0.1
-generated by GNU Autoconf 2.59
+font-util configure 1.0.2
+generated by GNU Autoconf 2.64
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit 0
+  exit
 fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR
+# ------------------------------------
+# Tests whether SYMBOL is declared, setting cache variable VAR accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
+$as_echo_n "checking whether $2 is declared... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $2
+  (void) $2;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_decl
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_compile
+cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by font-util $as_me 1.0.1, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+It was created by font-util $as_me 1.0.2, which was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
+exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -968,7 +1654,7 @@ uname -v = `(uname -v) 2>/dev/null || echo unknown`
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -980,8 +1666,9 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
 
 } >&5
 
@@ -1003,7 +1690,6 @@ _ACEOF
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
-ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -1014,13 +1700,13 @@ do
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
     2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      as_fn_append ac_configure_args1 " '$ac_arg'"
       if test $ac_must_keep_next = true; then
 	ac_must_keep_next=false # Got value, back to normal.
       else
@@ -1036,21 +1722,19 @@ do
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
+      as_fn_append ac_configure_args " '$ac_arg'"
       ;;
     esac
   done
 done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
 
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1063,20 +1747,35 @@ trap 'exit_status=$?
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
   (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
     *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-}
+    esac |
+    sort
+)
     echo
 
     cat <<\_ASBOX
@@ -1087,22 +1786,28 @@ _ASBOX
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1114,26 +1819,26 @@ _ASBOX
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      cat confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-     ' 0
+' 0
 for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1141,40 +1846,46 @@ cat >>confdefs.h <<_ACEOF
 #define PACKAGE_NAME "$PACKAGE_NAME"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_VERSION "$PACKAGE_VERSION"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_STRING "$PACKAGE_STRING"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
 _ACEOF
 
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-for ac_site_file in $CONFIG_SITE; do
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1184,69 +1895,79 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
       *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
     esac
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -1255,56 +1976,30 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
+am__api_version='1.10'
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-am__api_version="1.9"
 ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f $ac_dir/shtool; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  for ac_t in install-sh install.sh shtool; do
+    if test -f "$ac_dir/$ac_t"; then
+      ac_aux_dir=$ac_dir
+      ac_install_sh="$ac_aux_dir/$ac_t -c"
+      break 2
+    fi
+  done
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -1319,22 +2014,23 @@ ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+if test "${ac_cv_path_install+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
   /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
   /usr/ucb/* ) ;;
   *)
     # OSF1 and SCO ODT 3.0 have their own names for install.
@@ -1342,7 +2038,7 @@ case $as_dir/ in
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -1352,30 +2048,43 @@ case $as_dir/ in
 	    # program-specific install script used by HP pwplus--don't use.
 	    :
 	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
     done
     ;;
 esac
-done
 
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1385,8 +2094,8 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
@@ -1409,11 +2118,8 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&2;}
-   { (exit 1); exit 1; }; }
+      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
    fi
 
    test "$2" = conftest.file
@@ -1422,26 +2128,20 @@ then
    # Ok.
    :
 else
-   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
-   { (exit 1); exit 1; }; }
+   as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
@@ -1452,51 +2152,66 @@ if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if test "${ac_cv_path_mkdir+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
   done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
+IFS=$as_save_IFS
+
+fi
+
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
   else
-    mkdir_p='$(install_sh) -d'
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    test -d ./--version && rmdir ./--version
+    MKDIR_P="$ac_install_sh -d"
   fi
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
 
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
   ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -1506,55 +2221,59 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
   test -n "$AWK" && break
 done
 
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
 all:
-	@echo 'ac_maketemp="$(MAKE)"'
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
 rm -f conftest.make
 fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -1567,12 +2286,14 @@ else
 fi
 rmdir .tst 2>/dev/null
 
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-   { (exit 1); exit 1; }; }
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
 fi
 
 # test whether we have cygpath
@@ -1587,7 +2308,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='font-util'
- VERSION='1.0.1'
+ VERSION='1.0.2'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -1615,7 +2336,7 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
 
 # Installed binaries are usually stripped using `strip' when the user
 # run `make install-strip'.  However `strip' might not be the right
@@ -1625,10 +2346,10 @@ if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
   ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
@@ -1638,35 +2359,37 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
   ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
@@ -1676,34 +2399,44 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  STRIP=$ac_ct_STRIP
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
 
 fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
@@ -1717,20 +2450,18 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
 
 
-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+    # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 else
   USE_MAINTAINER_MODE=no
-fi;
-  echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
-
+fi
 
-if test $USE_MAINTAINER_MODE = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+   if test $USE_MAINTAINER_MODE = yes; then
   MAINTAINER_MODE_TRUE=
   MAINTAINER_MODE_FALSE='#'
 else
@@ -1742,7 +2473,88 @@ fi
 
 
 
-          ac_config_headers="$ac_config_headers config.h"
+# Require xorg-macros: XORG_CWARNFLAGS, XORG_CHANGELOG
+
+
+	XORG_MACROS_needed_version=1.2
+	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
+	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}" >&5
+$as_echo_n "checking if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}... " >&6; }
+	XORG_MACROS_version=1.2.1
+	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
+	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`
+	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
+		as_fn_error "configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x" "$LINENO" 5
+	fi
+	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
+		as_fn_error "configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer" "$LINENO" 5
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, $XORG_MACROS_version" >&5
+$as_echo "yes, $XORG_MACROS_version" >&6; }
+
+ac_config_headers="$ac_config_headers config.h"
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
 
 
 ac_ext=c
@@ -1753,10 +2565,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1766,35 +2578,37 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -1804,39 +2618,50 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 else
   CC="$ac_cv_prog_CC"
 fi
 
 if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1846,77 +2671,37 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
 
+  fi
 fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1927,18 +2712,19 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
      fi
     ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -1956,24 +2742,25 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
 fi
 if test -z "$CC"; then
   if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
+  for ac_prog in cl.exe
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1983,39 +2770,41 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
     test -n "$CC" && break
   done
 fi
 if test -z "$CC"; then
   ac_ct_CC=$CC
-  for ac_prog in cl
+  for ac_prog in cl.exe
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -2025,183 +2814,227 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
   test -n "$ac_ct_CC" && break
 done
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 fi
 
 fi
 
 
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
+#include <stdio.h>
 int
 main ()
 {
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
 
   ;
   return 0;
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
-    conftest.$ac_ext )
-	# This is the source file.
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
 	# certainly right.
 	break;;
     *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
 	break;;
     * )
 	break;;
   esac
 done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
 else
-  echo "$as_me: failed program was:" >&5
+  ac_file=''
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+if test -z "$ac_file"; then :
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
 fi
-
 ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
 
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
     cross_compiling=no
   else
     if test "$cross_compiling" = maybe; then
 	cross_compiling=yes
     else
-	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+See \`config.log' for more details." "$LINENO" 5; }
     fi
   fi
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
 
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
 ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   # If both `conftest.exe' and `conftest' are `present' (well, observable)
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
 # work properly (i.e., refer to `conftest.exe'), while it won't with
@@ -2209,38 +3042,31 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
 	  break;;
     * ) break;;
   esac
 done
 else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2252,45 +3078,46 @@ main ()
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
 done
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2304,55 +3131,34 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_compiler_gnu=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
+  ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2363,39 +3169,49 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
 
-ac_cv_prog_cc_g=no
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -2411,18 +3227,14 @@ else
     CFLAGS=
   fi
 fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_prog_cc_stdc=no
+  ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
@@ -2450,12 +3262,17 @@ static char *f (char * (*g) (char **, int), char **p, ...)
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not '\xHH' hex character constants.
    These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
+   as 'x'.  The following induces an error, until -std is added to get
    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
    array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
+   that's true only with -std.  */
 int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -2470,282 +3287,1122 @@ return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
   return 0;
 }
 _ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
 fi
-rm -f conftest.err conftest.$ac_objext
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
 CC=$ac_save_CC
 
 fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
   *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
 esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
 
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if test "${ac_cv_prog_CPP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
 #endif
+		     Syntax error
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
 do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-$ac_declaration
 #include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
 int
 main ()
 {
-exit (42);
+
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
 
-continue
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-$ac_declaration
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
 int
 main ()
 {
-exit (42);
-  ;
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
+if ac_fn_c_try_run "$LINENO"; then :
+
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
 
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
 
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+if  test "x$GCC" = xyes ; then
+    CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+    case `gcc -dumpversion` in
+    3.4.* | 4.*)
+	CWARNFLAGS+=" -Wold-style-definition -Wdeclaration-after-statement"
+	;;
+    esac
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+    ac_fn_c_check_decl "$LINENO" "__SUNPRO_C" "ac_cv_have_decl___SUNPRO_C" "$ac_includes_default"
+if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then :
+  SUNCC="yes"
+else
+  SUNCC="no"
+fi
 
+    if test "x$SUNCC" = "xyes"; then
+	CWARNFLAGS="-v"
+    fi
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-DEPDIR="${am__leading_dot}deps"
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-          ac_config_commands="$ac_config_commands depfiles"
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
 
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
 fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
 
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
-  enableval="$enable_dependency_tracking"
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-fi;
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
-if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
 fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
 
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
 
+fi
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 depcc="$CC"   am_compiler_list=
 
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
   # We make a subdir and do the tests there.  Otherwise we can end up
@@ -2807,6 +4464,7 @@ else
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
        $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -2832,13 +4490,11 @@ else
 fi
 
 fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
-
-
-if
+ if
   test "x$enable_dependency_tracking" != xno \
   && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
   am__fastdepCC_TRUE=
@@ -2849,226 +4505,134 @@ else
 fi
 
 
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-done
-
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL=$ac_install_sh
-  fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
 
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+mapdir=${libdir}/X11/fonts/util
 
+# Check whether --with-mapdir was given.
+if test "${with_mapdir+set}" = set; then :
+  withval=$with_mapdir; mapdir="$withval"
+fi
 
+MAPDIR="$mapdir"
 
 
-DEFAULT_MAPDIR=${libdir}/X11/fonts/util
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
 
-# Check whether --with-mapdir or --without-mapdir was given.
-if test "${with_mapdir+set}" = set; then
-  withval="$with_mapdir"
-  MAPDIR="$withval"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  MAPDIR="$DEFAULT_MAPDIR"
-fi;
-
-
-# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+esac
 build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+esac
 host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
 
 
 
 if test x$APP_MAN_SUFFIX = x    ; then
-    case $host_os in
-	linux*)	APP_MAN_SUFFIX=1x ;;
-	*)	APP_MAN_SUFFIX=1  ;;
-    esac
+    APP_MAN_SUFFIX=1
 fi
 if test x$APP_MAN_DIR = x    ; then
-    case $host_os in
-	linux*)	APP_MAN_DIR='$(mandir)/man1' ;;
-	*)	APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)' ;;
-    esac
+    APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
 fi
 
 if test x$LIB_MAN_SUFFIX = x    ; then
-    case $host_os in
-	linux*)	LIB_MAN_SUFFIX=3x ;;
-	*)	LIB_MAN_SUFFIX=3  ;;
-    esac
+    LIB_MAN_SUFFIX=3
 fi
 if test x$LIB_MAN_DIR = x    ; then
-    case $host_os in
-	linux*)	LIB_MAN_DIR='$(mandir)/man3' ;;
-	*)	LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)' ;;
-    esac
+    LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
 fi
 
 if test x$FILE_MAN_SUFFIX = x    ; then
     case $host_os in
-	linux*)		FILE_MAN_SUFFIX=5x ;;
 	solaris*)	FILE_MAN_SUFFIX=4  ;;
 	*)		FILE_MAN_SUFFIX=5  ;;
     esac
 fi
 if test x$FILE_MAN_DIR = x    ; then
-    case $host_os in
-	linux*)	FILE_MAN_DIR='$(mandir)/man5' ;;
-	*)	FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)' ;;
-    esac
+    FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
 fi
 
-# In Imake's linux.cf, the misc man suffix & dir was only changed for
-# LinuxDebian, not other Linuxes, so we leave it unchanged here
 if test x$MISC_MAN_SUFFIX = x    ; then
     case $host_os in
-#	linux*)		MISC_MAN_SUFFIX=7x ;;
 	solaris*)	MISC_MAN_SUFFIX=5  ;;
 	*)		MISC_MAN_SUFFIX=7  ;;
     esac
 fi
 if test x$MISC_MAN_DIR = x    ; then
-    case $host_os in
-#	linux*)	MISC_MAN_DIR='$(mandir)/man7' ;;
-	*)	MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)' ;;
-    esac
+    MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
 fi
 
-# In Imake's linux.cf, the driver man suffix & dir was only changed for
-# LinuxDebian, not other Linuxes, so we leave it unchanged here
 if test x$DRIVER_MAN_SUFFIX = x    ; then
     case $host_os in
-#	linux*)		DRIVER_MAN_SUFFIX=4x ;;
 	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
 	*)		DRIVER_MAN_SUFFIX=4  ;;
     esac
 fi
 if test x$DRIVER_MAN_DIR = x    ; then
-    case $host_os in
-#	linux*)	DRIVER_MAN_DIR='$(mandir)/man4' ;;
-	*)	DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)' ;;
-    esac
+    DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
 fi
 
 if test x$ADMIN_MAN_SUFFIX = x    ; then
@@ -3097,22 +4661,54 @@ fi
 
 
 
-# Check whether --with-release-version or --without-release-version was given.
-if test "${with_release_version+set}" = set; then
-  withval="$with_release_version"
-  RELEASE_VERSION="$withval"
+# Check whether --with-release-version was given.
+if test "${with_release_version+set}" = set; then :
+  withval=$with_release_version; RELEASE_VERSION="$withval"
 else
   RELEASE_VERSION=""
-fi;
+fi
+
 	if test "x$RELEASE_VERSION" != "x"; then
 		PACKAGE="$PACKAGE-$RELEASE_VERSION"
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
-		{ echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
-echo "$as_me: Building with package name set to $PACKAGE" >&6;}
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: Building with package name set to $PACKAGE" >&5
+$as_echo "$as_me: Building with package name set to $PACKAGE" >&6;}
 	fi
 
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1`
+_ACEOF
+
+	PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
+	if test "x$PVM" = "x"; then
+		PVM="0"
+	fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_MINOR $PVM
+_ACEOF
+
+	PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
+	if test "x$PVP" = "x"; then
+		PVP="0"
+	fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_PATCHLEVEL $PVP
+_ACEOF
+
+
+
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+
+distcleancheck_listfiles='find . -type f ! -name ChangeLog -print'
+
+
+
+ac_config_files="$ac_config_files Makefile fontutil.pc"
 
-                    ac_config_files="$ac_config_files Makefile fontutil.pc"
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -3131,39 +4727,59 @@ _ACEOF
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
   (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
+      ;; #(
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-} |
+    esac |
+    sort
+) |
   sed '
+     /^ac_cv_env_/b end
      t clear
-     : clear
+     :clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -3172,32 +4788,18 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
 DEFS=-DHAVE_CONFIG_H
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -3205,33 +4807,30 @@ LTLIBOBJS=$ac_ltlibobjs
 
 
 if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -3241,81 +4840,252 @@ cat >$CONFIG_STATUS <<_ACEOF
 debug=false
 ac_cs_recheck=false
 ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
 
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
 else
-  as_unset=false
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
   fi
-done
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
 fi
 
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-# PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
@@ -3323,148 +5093,123 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
 else
-  as_expr=false
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
 fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
 
+} # as_fn_mkdir_p
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -3473,31 +5218,20 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by font-util $as_me 1.0.1, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+# values after options handling.
+ac_log="
+This file was extended by font-util $as_me 1.0.2, which was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -3505,45 +5239,46 @@ generated by GNU Autoconf 2.59.  Invocation command line was
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
 _ACEOF
 
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
 
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
 
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
 
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [TAG]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
 
 Configuration files:
 $config_files
@@ -3554,84 +5289,83 @@ $config_headers
 Configuration commands:
 $config_commands
 
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
+Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>."
 
-cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-font-util config.status 1.0.1
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+font-util config.status 1.0.2
+configured by $0, generated by GNU Autoconf 2.64,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
   case $1 in
   --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  -*)
+  *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
   --header | --heade | --head | --hea )
     $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
     ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
+  -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
 
-  *) ac_config_targets="$ac_config_targets $1" ;;
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
 
   esac
   shift
@@ -3645,40 +5379,52 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
 fi
 
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
 
-cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #
-# INIT-COMMANDS section.
+# INIT-COMMANDS
 #
-
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 _ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
-
-cat >>$CONFIG_STATUS <<\_ACEOF
+# Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "fontutil.pc" ) CONFIG_FILES="$CONFIG_FILES fontutil.pc" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "fontutil.pc") CONFIG_FILES="$CONFIG_FILES fontutil.pc" ;;
+
+  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
+
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -3690,736 +5436,583 @@ if $ac_need_defaults; then
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
 }
-
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
 {
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
 
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
 _ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-cat >>$CONFIG_STATUS <<_ACEOF
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
 
-#
-# CONFIG_FILES section.
-#
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
 
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
-s,@MAINT@,$MAINT,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@MAPDIR@,$MAPDIR,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@APP_MAN_SUFFIX@,$APP_MAN_SUFFIX,;t t
-s,@LIB_MAN_SUFFIX@,$LIB_MAN_SUFFIX,;t t
-s,@FILE_MAN_SUFFIX@,$FILE_MAN_SUFFIX,;t t
-s,@MISC_MAN_SUFFIX@,$MISC_MAN_SUFFIX,;t t
-s,@DRIVER_MAN_SUFFIX@,$DRIVER_MAN_SUFFIX,;t t
-s,@ADMIN_MAN_SUFFIX@,$ADMIN_MAN_SUFFIX,;t t
-s,@APP_MAN_DIR@,$APP_MAN_DIR,;t t
-s,@LIB_MAN_DIR@,$LIB_MAN_DIR,;t t
-s,@FILE_MAN_DIR@,$FILE_MAN_DIR,;t t
-s,@MISC_MAN_DIR@,$MISC_MAN_DIR,;t t
-s,@DRIVER_MAN_DIR@,$DRIVER_MAN_DIR,;t t
-s,@ADMIN_MAN_DIR@,$ADMIN_MAN_DIR,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
 _ACEOF
 
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_t"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
-fi # test -n "$CONFIG_FILES"
+done
 
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
   esac
 
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+  ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
   ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
   esac
+_ACEOF
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
   case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
   if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+    } >"$tmp/config.h" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
+      rm -f "$ac_file"
+      mv "$tmp/config.h" "$ac_file" \
+	|| as_fn_error "could not create $ac_file" "$LINENO" 5
     fi
   else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error "could not create -" "$LINENO" 5
   fi
-# Compute $ac_file's index in $config_headers.
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $ac_file | $ac_file:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X$ac_file : 'X\(//\)[^/]' \| \
-	 X$ac_file : 'X\(//\)$' \| \
-	 X$ac_file : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X$ac_file |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_dest" : 'X\(//\)[^/]' \| \
-	 X"$ac_dest" : 'X\(//\)$' \| \
-	 X"$ac_dest" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files
+# are listed without --file.  Let's play safe and only enable the eval
+# if we detect the quoting.
+case $CONFIG_FILES in
+*\'*) eval set x "$CONFIG_FILES" ;;
+*)   set x $CONFIG_FILES ;;
 esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+shift
+for mf
+do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -4427,20 +6020,32 @@ echo "$as_me: executing $ac_dest commands" >&6;}
   # some people rename them; so instead we look at the file content.
   # Grep'ing the first line is not enough: some people post-process
   # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`(dirname "$mf") 2>/dev/null ||
+  # Grep'ing the whole file is not good either: AIX grep has a line
+  # limit of 2048, but all sed's we know have understand at least 4000.
+  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+    dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   else
     continue
   fi
@@ -4462,59 +6067,47 @@ echo X"$mf" |
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
-    fdir=`(dirname "$file") 2>/dev/null ||
+    fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    { if $as_mkdir_p; then
-    mkdir -p $dirpart/$fdir
-  else
-    as_dir=$dirpart/$fdir
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
-   { (exit 1); exit 1; }; }; }
-
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    as_dir=$dirpart/$fdir; as_fn_mkdir_p
     # echo "creating $dirpart/$file"
     echo '# dummy' > "$dirpart/$file"
   done
 done
  ;;
+
   esac
-done
-_ACEOF
+done # for ac_tag
 
-cat >>$CONFIG_STATUS <<\_ACEOF
 
-{ (exit 0); exit 0; }
+as_fn_exit 0
 _ACEOF
-chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -4534,6 +6127,10 @@ if test "$no_create" != yes; then
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
+  $ac_cs_success || as_fn_exit $?
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
 fi
 
diff --git a/xorg-server/fonts.src/font-util/configure.ac b/xorg-server/fonts.src/font-util/configure.ac
index e582c8957..90d0e6f6f 100644
--- a/xorg-server/fonts.src/font-util/configure.ac
+++ b/xorg-server/fonts.src/font-util/configure.ac
@@ -22,25 +22,27 @@ dnl
 dnl Process this file with autoconf to create configure.
 
 AC_PREREQ([2.57])
-AC_INIT(font-util, [1.0.1], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], font-util)
+AC_INIT(font-util, [1.0.2], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], font-util)
 AM_INIT_AUTOMAKE([foreign dist-bzip2])
 AM_MAINTAINER_MODE
 
+# Require xorg-macros: XORG_CWARNFLAGS, XORG_CHANGELOG
+m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.2 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.2)
 AM_CONFIG_HEADER(config.h)
+XORG_CWARNFLAGS
 
 AC_PROG_CC
 AC_PROG_INSTALL
 
-m4_ifdef([AS_HELP_STRING], , [m4_define([AS_HELP_STRING], m4_defn([AC_HELP_STRING]))])
-
-DEFAULT_MAPDIR=${libdir}/X11/fonts/util
-AC_ARG_WITH(mapdir,
-	AS_HELP_STRING([--with-mapdir=MAPDIR], [Path to install font maps]),
-	[MAPDIR="$withval"],
-	[MAPDIR="$DEFAULT_MAPDIR"])
+mapdir=${libdir}/X11/fonts/util
+AC_ARG_WITH(mapdir, AC_HELP_STRING([--with-mapdir=<pathname>],
+	[Path to install font maps]), [mapdir="$withval"])
+MAPDIR="$mapdir"
 AC_SUBST(MAPDIR)
 
 XORG_MANPAGE_SECTIONS
 XORG_RELEASE_VERSION
+XORG_CHANGELOG
 
 AC_OUTPUT([Makefile fontutil.pc])
diff --git a/xorg-server/fonts.src/font-util/depcomp b/xorg-server/fonts.src/font-util/depcomp
index 04701da53..e5f9736c7 100644
--- a/xorg-server/fonts.src/font-util/depcomp
+++ b/xorg-server/fonts.src/font-util/depcomp
@@ -1,9 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2005-07-09.11
+scriptversion=2007-03-29.01
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
+# Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -91,7 +92,20 @@ gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
   stat=$?
   if test $stat -eq 0; then :
   else
@@ -201,34 +215,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -276,6 +295,46 @@ icc)
   rm -f "$tmpdepfile"
   ;;
 
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
 tru64)
    # The Tru64 compiler uses -MD to generate dependencies as a side
    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -288,13 +347,13 @@ tru64)
 
    if test "$libtool" = yes; then
       # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
+      # static library.  This mechanism is used in libtool 1.4 series to
       # handle both shared and static libraries in a single compilation.
       # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
       #
       # With libtool 1.5 this exception was removed, and libtool now
       # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # compilations output dependencies in $dir.libs/$base.o.d and
       # in $dir$base.o.d.  We have to check for both files, because
       # one of the two compilations can be disabled.  We should prefer
       # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
diff --git a/xorg-server/fonts.src/font-util/install-sh b/xorg-server/fonts.src/font-util/install-sh
index 4d4a9519e..a5897de6e 100644
--- a/xorg-server/fonts.src/font-util/install-sh
+++ b/xorg-server/fonts.src/font-util/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2005-05-14.22
+scriptversion=2006-12-25.00
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,38 +39,68 @@ scriptversion=2005-05-14.22
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
 
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
 
-chmodcmd="$chmodprog 0755"
-chowncmd=
 chgrpcmd=
-stripcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -80,81 +110,86 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
-while test -n "$1"; do
+while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
+
+    -C) copy_on_change=true;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
     --help) echo "$usage"; exit $?;;
 
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
+    --)	shift
 	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
   esac
+  shift
 done
 
-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
   if test -z "$dir_arg"; then
     echo "$0: no input file specified." >&2
     exit 1
@@ -164,24 +199,47 @@ if test -z "$1"; then
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
 for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
     dst=$src
-    src=
-
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
   else
+
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
@@ -190,71 +248,199 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
-      dst=$dst/`basename "$src"`
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
     fi
   fi
 
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
 
-  # Make sure that the destination directory exists.
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
 
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
 
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    shift
-    IFS=$oIFS
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
 
-    pathcomp=
+      eval "$initialize_posix_glob"
 
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
       shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
       fi
-      pathcomp=$pathcomp/
-    done
+    fi
   fi
 
   if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
   else
-    dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
@@ -262,10 +448,9 @@ do
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
 
     # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -273,48 +458,59 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit 1; }
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
 done
 
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit 0
-}
-
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
diff --git a/xorg-server/fonts.src/font-util/missing b/xorg-server/fonts.src/font-util/missing
index 894e786e1..1c8ff7049 100644
--- a/xorg-server/fonts.src/font-util/missing
+++ b/xorg-server/fonts.src/font-util/missing
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2005-06-08.21
+scriptversion=2006-05-10.23
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
 #   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
@@ -33,6 +33,8 @@ if test $# -eq 0; then
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -44,7 +46,7 @@ fi
 
 msg="missing on your system"
 
-case "$1" in
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -77,6 +79,7 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -106,7 +109,7 @@ esac
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
 # the program).
-case "$1" in
+case $1 in
   lex|yacc)
     # Not GNU programs, they don't have --version.
     ;;
@@ -135,7 +138,7 @@ esac
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case "$1" in
+case $1 in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -164,7 +167,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -192,8 +195,8 @@ WARNING: \`$1' is needed, but is $msg.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -214,25 +217,25 @@ WARNING: \`$1' $msg.  You should only need it if
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
@@ -244,18 +247,18 @@ WARNING: \`$1' is $msg.  You should only need it if
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
@@ -267,11 +270,9 @@ WARNING: \`$1' is $msg.  You should only need it if
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
 	touch $file
     else
 	test -z "$file" || exec >$file
@@ -289,11 +290,17 @@ WARNING: \`$1' is $msg.  You should only need it if
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
     # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
       # ... or it is the one specified with @setfilename ...
       infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
       # ... or it is derived from the source name (dir/f.texi becomes f.info)
       test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
@@ -317,13 +324,13 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
diff --git a/xorg-server/fonts.src/font-util/ucs2any.c b/xorg-server/fonts.src/font-util/ucs2any.c
index 0437c5b49..054a40ac2 100644
--- a/xorg-server/fonts.src/font-util/ucs2any.c
+++ b/xorg-server/fonts.src/font-util/ucs2any.c
@@ -13,9 +13,6 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of The NetBSD Foundation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
@@ -55,7 +52,7 @@
 #include <unistd.h>
 
 /* global variable for argv[0] */
-const char *my_name = NULL;
+static const char *my_name = NULL;
 
 #ifdef NEED_BASENAME
 static char *
@@ -336,7 +333,7 @@ DEC VT100 graphics characters in the range 1-31 (as expected by
 some old xterm versions and a few other applications)
 */
 #define decmap_size 31
-int decmap[decmap_size] = {
+static int decmap[decmap_size] = {
 	0x25C6, /* BLACK DIAMOND */
 	0x2592, /* MEDIUM SHADE */
 	0x2409, /* SYMBOL FOR HORIZONTAL TABULATION */
@@ -522,6 +519,7 @@ main(int argc, char *argv[])
 	char *registry_encoding = NULL;
 
 	my_name = argv[0];
+	bbx.cheight = bbx.cxoff = bbx.cyoff = -1;
 
 	startchar = da_new("startchar");
 	my_char = da_new("my_char");
diff --git a/xorg-server/glx/Makefile.in b/xorg-server/glx/Makefile.in
index ad5fb2d99..4eeb62b6b 100644
--- a/xorg-server/glx/Makefile.in
+++ b/xorg-server/glx/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libglx_la_LIBADD =
 am__objects_1 = indirect_dispatch.lo indirect_dispatch_swap.lo \
@@ -74,6 +77,7 @@ libglxdri_la_OBJECTS = $(am_libglxdri_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -216,6 +220,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -455,9 +460,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  glx/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  glx/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign glx/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign glx/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -475,6 +480,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -529,21 +535,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -566,7 +572,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -574,29 +580,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -617,13 +628,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -651,6 +666,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -672,6 +688,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -680,18 +698,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -729,6 +757,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/glx/glxext.c b/xorg-server/glx/glxext.c
index 01e93fd5c..1598e27a6 100644
--- a/xorg-server/glx/glxext.c
+++ b/xorg-server/glx/glxext.c
@@ -131,6 +131,33 @@ static Bool DrawableGone(__GLXdrawable *glxPriv, XID xid)
     __GLXcontext *c;
 
     for (c = glxAllContexts; c; c = c->next) {
+	if (c->isCurrent && (c->drawPriv == glxPriv || c->readPriv == glxPriv)) {
+	    int i;
+
+	    (*c->loseCurrent)(c);
+	    c->isCurrent = GL_FALSE;
+	    if (c == __glXLastContext)
+		__glXFlushContextCache();
+
+	    for (i = 1; i < currentMaxClients; i++) {
+		if (clients[i]) {
+		    __GLXclientState *cl = glxGetClient(clients[i]);
+
+		    if (cl->inUse) {
+			int j;
+
+			for (j = 0; j < cl->numCurrentContexts; j++) {
+			    if (cl->currentContexts[j] == c)
+				cl->currentContexts[j] = NULL;
+			}
+		    }
+		}
+	    }
+
+	    if (!c->idExists) {
+		__glXFreeContext(c);
+	    }
+	}
 	if (c->drawPriv == glxPriv)
 	    c->drawPriv = NULL;
 	if (c->readPriv == glxPriv)
diff --git a/xorg-server/hw/Makefile.in b/xorg-server/hw/Makefile.in
index b09ad0eee..b6326eb22 100644
--- a/xorg-server/hw/Makefile.in
+++ b/xorg-server/hw/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,6 +49,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -58,9 +61,37 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -192,6 +223,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -367,9 +399,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -387,6 +419,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -418,7 +451,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -452,16 +485,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -476,7 +509,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -488,7 +521,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -497,29 +530,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -540,29 +578,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -592,6 +645,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -610,6 +664,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -618,18 +674,28 @@ install-data-am:
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -650,8 +716,8 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -670,6 +736,7 @@ uninstall-am:
 
 relink:
 	for i in $(SUBDIRS) ; do $(MAKE) -C $$i relink ; done
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/dmx/Makefile.in b/xorg-server/hw/dmx/Makefile.in
index 6a5b2abe8..c2dde0609 100644
--- a/xorg-server/hw/dmx/Makefile.in
+++ b/xorg-server/hw/dmx/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -52,8 +54,8 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am__Xdmx_SOURCES_DIST = dmx.c dmxcb.c dmxcb.h dmxclient.h dmxcmap.c \
 	dmxcmap.h dmx-config.h dmxcursor.c dmxcursor.h dmxdpms.c \
@@ -86,6 +88,7 @@ Xdmx_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -106,14 +109,56 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-appmanDATA_INSTALL = $(INSTALL_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 DATA = $(appman_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -245,6 +290,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -498,9 +544,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/dmx/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/dmx/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/dmx/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/dmx/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -518,34 +564,50 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Xdmx$(EXEEXT): $(Xdmx_OBJECTS) $(Xdmx_DEPENDENCIES) 
 	@rm -f Xdmx$(EXEEXT)
 	$(Xdmx_LINK) $(Xdmx_OBJECTS) $(Xdmx_LDADD) $(LIBS)
@@ -584,63 +646,63 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 miinitext.o: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.o -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
 
 miinitext.obj: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.obj -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
 
 fbcmap_mi.o: $(top_srcdir)/fb/fbcmap_mi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbcmap_mi.o -MD -MP -MF $(DEPDIR)/fbcmap_mi.Tpo -c -o fbcmap_mi.o `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='fbcmap_mi.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbcmap_mi.o `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
 
 fbcmap_mi.obj: $(top_srcdir)/fb/fbcmap_mi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbcmap_mi.obj -MD -MP -MF $(DEPDIR)/fbcmap_mi.Tpo -c -o fbcmap_mi.obj `if test -f '$(top_srcdir)/fb/fbcmap_mi.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap_mi.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap_mi.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='fbcmap_mi.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbcmap_mi.obj `if test -f '$(top_srcdir)/fb/fbcmap_mi.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap_mi.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap_mi.c'; fi`
 
 panoramiX.o: $(top_srcdir)/Xext/panoramiX.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT panoramiX.o -MD -MP -MF $(DEPDIR)/panoramiX.Tpo -c -o panoramiX.o `test -f '$(top_srcdir)/Xext/panoramiX.c' || echo '$(srcdir)/'`$(top_srcdir)/Xext/panoramiX.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/panoramiX.Tpo $(DEPDIR)/panoramiX.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/panoramiX.Tpo $(DEPDIR)/panoramiX.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xext/panoramiX.c' object='panoramiX.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o panoramiX.o `test -f '$(top_srcdir)/Xext/panoramiX.c' || echo '$(srcdir)/'`$(top_srcdir)/Xext/panoramiX.c
 
 panoramiX.obj: $(top_srcdir)/Xext/panoramiX.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT panoramiX.obj -MD -MP -MF $(DEPDIR)/panoramiX.Tpo -c -o panoramiX.obj `if test -f '$(top_srcdir)/Xext/panoramiX.c'; then $(CYGPATH_W) '$(top_srcdir)/Xext/panoramiX.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xext/panoramiX.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/panoramiX.Tpo $(DEPDIR)/panoramiX.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/panoramiX.Tpo $(DEPDIR)/panoramiX.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xext/panoramiX.c' object='panoramiX.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o panoramiX.obj `if test -f '$(top_srcdir)/Xext/panoramiX.c'; then $(CYGPATH_W) '$(top_srcdir)/Xext/panoramiX.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xext/panoramiX.c'; fi`
@@ -653,20 +715,23 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -692,7 +757,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -726,16 +791,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -750,7 +815,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -762,7 +827,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -771,29 +836,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -814,29 +884,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -870,6 +955,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -890,6 +976,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -898,18 +986,28 @@ install-data-am: install-appmanDATA
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -932,8 +1030,8 @@ ps-am:
 
 uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-binPROGRAMS \
@@ -957,6 +1055,7 @@ uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 
 relink:
 	rm -f Xdmx && $(MAKE) Xdmx
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/dmx/config/Makefile.in b/xorg-server/hw/dmx/config/Makefile.in
index df4be6d1a..d6d1cf153 100644
--- a/xorg-server/hw/dmx/config/Makefile.in
+++ b/xorg-server/hw/dmx/config/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,8 +19,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -52,6 +54,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libdmxconfig_a_AR = $(AR) $(ARFLAGS)
@@ -61,7 +64,6 @@ am__objects_1 = parser.$(OBJEXT) scanner.$(OBJEXT) dmxparse.$(OBJEXT) \
 am_libdmxconfig_a_OBJECTS = $(am__objects_1)
 libdmxconfig_a_OBJECTS = $(am_libdmxconfig_a_OBJECTS)
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_dmxtodmx_OBJECTS = dmxtodmx.$(OBJEXT)
 dmxtodmx_OBJECTS = $(am_dmxtodmx_OBJECTS)
@@ -76,6 +78,7 @@ xdmxconfig_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -100,8 +103,22 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-appmanDATA_INSTALL = $(INSTALL_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 DATA = $(appman_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -237,6 +254,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -465,9 +483,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/dmx/config/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/dmx/config/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/dmx/config/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/dmx/config/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -485,6 +503,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -495,31 +514,46 @@ libdmxconfig.a: $(libdmxconfig_a_OBJECTS) $(libdmxconfig_a_DEPENDENCIES)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 dmxtodmx$(EXEEXT): $(dmxtodmx_OBJECTS) $(dmxtodmx_DEPENDENCIES) 
 	@rm -f dmxtodmx$(EXEEXT)
 	$(LINK) $(dmxtodmx_OBJECTS) $(dmxtodmx_LDADD) $(LIBS)
@@ -550,63 +584,63 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 xdmxconfig-xdmxconfig.o: xdmxconfig.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -MT xdmxconfig-xdmxconfig.o -MD -MP -MF $(DEPDIR)/xdmxconfig-xdmxconfig.Tpo -c -o xdmxconfig-xdmxconfig.o `test -f 'xdmxconfig.c' || echo '$(srcdir)/'`xdmxconfig.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xdmxconfig-xdmxconfig.Tpo $(DEPDIR)/xdmxconfig-xdmxconfig.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xdmxconfig-xdmxconfig.Tpo $(DEPDIR)/xdmxconfig-xdmxconfig.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xdmxconfig.c' object='xdmxconfig-xdmxconfig.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -c -o xdmxconfig-xdmxconfig.o `test -f 'xdmxconfig.c' || echo '$(srcdir)/'`xdmxconfig.c
 
 xdmxconfig-xdmxconfig.obj: xdmxconfig.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -MT xdmxconfig-xdmxconfig.obj -MD -MP -MF $(DEPDIR)/xdmxconfig-xdmxconfig.Tpo -c -o xdmxconfig-xdmxconfig.obj `if test -f 'xdmxconfig.c'; then $(CYGPATH_W) 'xdmxconfig.c'; else $(CYGPATH_W) '$(srcdir)/xdmxconfig.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xdmxconfig-xdmxconfig.Tpo $(DEPDIR)/xdmxconfig-xdmxconfig.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xdmxconfig-xdmxconfig.Tpo $(DEPDIR)/xdmxconfig-xdmxconfig.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xdmxconfig.c' object='xdmxconfig-xdmxconfig.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -c -o xdmxconfig-xdmxconfig.obj `if test -f 'xdmxconfig.c'; then $(CYGPATH_W) 'xdmxconfig.c'; else $(CYGPATH_W) '$(srcdir)/xdmxconfig.c'; fi`
 
 xdmxconfig-dmxlog.o: $(top_srcdir)/hw/dmx/dmxlog.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -MT xdmxconfig-dmxlog.o -MD -MP -MF $(DEPDIR)/xdmxconfig-dmxlog.Tpo -c -o xdmxconfig-dmxlog.o `test -f '$(top_srcdir)/hw/dmx/dmxlog.c' || echo '$(srcdir)/'`$(top_srcdir)/hw/dmx/dmxlog.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xdmxconfig-dmxlog.Tpo $(DEPDIR)/xdmxconfig-dmxlog.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xdmxconfig-dmxlog.Tpo $(DEPDIR)/xdmxconfig-dmxlog.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/hw/dmx/dmxlog.c' object='xdmxconfig-dmxlog.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -c -o xdmxconfig-dmxlog.o `test -f '$(top_srcdir)/hw/dmx/dmxlog.c' || echo '$(srcdir)/'`$(top_srcdir)/hw/dmx/dmxlog.c
 
 xdmxconfig-dmxlog.obj: $(top_srcdir)/hw/dmx/dmxlog.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -MT xdmxconfig-dmxlog.obj -MD -MP -MF $(DEPDIR)/xdmxconfig-dmxlog.Tpo -c -o xdmxconfig-dmxlog.obj `if test -f '$(top_srcdir)/hw/dmx/dmxlog.c'; then $(CYGPATH_W) '$(top_srcdir)/hw/dmx/dmxlog.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/hw/dmx/dmxlog.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xdmxconfig-dmxlog.Tpo $(DEPDIR)/xdmxconfig-dmxlog.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xdmxconfig-dmxlog.Tpo $(DEPDIR)/xdmxconfig-dmxlog.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/hw/dmx/dmxlog.c' object='xdmxconfig-dmxlog.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -c -o xdmxconfig-dmxlog.obj `if test -f '$(top_srcdir)/hw/dmx/dmxlog.c'; then $(CYGPATH_W) '$(top_srcdir)/hw/dmx/dmxlog.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/hw/dmx/dmxlog.c'; fi`
 
 xdmxconfig-Canvas.o: Canvas.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -MT xdmxconfig-Canvas.o -MD -MP -MF $(DEPDIR)/xdmxconfig-Canvas.Tpo -c -o xdmxconfig-Canvas.o `test -f 'Canvas.c' || echo '$(srcdir)/'`Canvas.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xdmxconfig-Canvas.Tpo $(DEPDIR)/xdmxconfig-Canvas.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xdmxconfig-Canvas.Tpo $(DEPDIR)/xdmxconfig-Canvas.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='Canvas.c' object='xdmxconfig-Canvas.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -c -o xdmxconfig-Canvas.o `test -f 'Canvas.c' || echo '$(srcdir)/'`Canvas.c
 
 xdmxconfig-Canvas.obj: Canvas.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -MT xdmxconfig-Canvas.obj -MD -MP -MF $(DEPDIR)/xdmxconfig-Canvas.Tpo -c -o xdmxconfig-Canvas.obj `if test -f 'Canvas.c'; then $(CYGPATH_W) 'Canvas.c'; else $(CYGPATH_W) '$(srcdir)/Canvas.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xdmxconfig-Canvas.Tpo $(DEPDIR)/xdmxconfig-Canvas.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xdmxconfig-Canvas.Tpo $(DEPDIR)/xdmxconfig-Canvas.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='Canvas.c' object='xdmxconfig-Canvas.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmxconfig_CFLAGS) $(CFLAGS) -c -o xdmxconfig-Canvas.obj `if test -f 'Canvas.c'; then $(CYGPATH_W) 'Canvas.c'; else $(CYGPATH_W) '$(srcdir)/Canvas.c'; fi`
@@ -625,20 +659,23 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -652,7 +689,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -660,29 +697,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -703,13 +745,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -743,6 +789,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -769,6 +816,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -777,18 +826,28 @@ install-data-am: install-appmanDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -811,7 +870,7 @@ ps-am:
 
 uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
 	clean-generic clean-libtool clean-noinstLIBRARIES ctags \
@@ -834,6 +893,7 @@ scanner.c: scanner.l parser.h
 
 .man.$(APP_MAN_SUFFIX):
 	sed $(MAN_SUBSTS) < $< > $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/dmx/doc/Makefile.in b/xorg-server/hw/dmx/doc/Makefile.in
index 0628a432e..57e43fd8b 100644
--- a/xorg-server/hw/dmx/doc/Makefile.in
+++ b/xorg-server/hw/dmx/doc/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -37,8 +38,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -69,6 +71,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 DATA = $(noinst_DATA)
@@ -204,6 +207,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -629,9 +633,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/dmx/doc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/dmx/doc/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/dmx/doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/dmx/doc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -649,6 +653,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -678,13 +683,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -713,6 +722,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -731,6 +741,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -739,18 +751,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -800,6 +822,7 @@ uninstall-am:
 @BUILD_LINUXDOC_TRUE@.sgml.html:
 @BUILD_LINUXDOC_TRUE@	@rm -f $@
 @BUILD_LINUXDOC_TRUE@	$(MAKE_HTML) $<
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/dmx/examples/Makefile.in b/xorg-server/hw/dmx/examples/Makefile.in
index e41cc5cc2..f30be248c 100644
--- a/xorg-server/hw/dmx/examples/Makefile.in
+++ b/xorg-server/hw/dmx/examples/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -53,8 +55,8 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 @DMX_BUILD_USB_TRUE@am__EXEEXT_1 = ev$(EXEEXT)
 PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
 am_dmxaddinput_OBJECTS = dmxaddinput-dmxaddinput.$(OBJEXT)
@@ -150,6 +152,7 @@ xtest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -302,6 +305,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -508,9 +512,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/dmx/examples/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/dmx/examples/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/dmx/examples/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/dmx/examples/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -528,41 +532,59 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 
 clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 dmxaddinput$(EXEEXT): $(dmxaddinput_OBJECTS) $(dmxaddinput_DEPENDENCIES) 
 	@rm -f dmxaddinput$(EXEEXT)
 	$(dmxaddinput_LINK) $(dmxaddinput_OBJECTS) $(dmxaddinput_LDADD) $(LIBS)
@@ -633,231 +655,231 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 dmxaddinput-dmxaddinput.o: dmxaddinput.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxaddinput_CFLAGS) $(CFLAGS) -MT dmxaddinput-dmxaddinput.o -MD -MP -MF $(DEPDIR)/dmxaddinput-dmxaddinput.Tpo -c -o dmxaddinput-dmxaddinput.o `test -f 'dmxaddinput.c' || echo '$(srcdir)/'`dmxaddinput.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxaddinput-dmxaddinput.Tpo $(DEPDIR)/dmxaddinput-dmxaddinput.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxaddinput-dmxaddinput.Tpo $(DEPDIR)/dmxaddinput-dmxaddinput.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxaddinput.c' object='dmxaddinput-dmxaddinput.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxaddinput_CFLAGS) $(CFLAGS) -c -o dmxaddinput-dmxaddinput.o `test -f 'dmxaddinput.c' || echo '$(srcdir)/'`dmxaddinput.c
 
 dmxaddinput-dmxaddinput.obj: dmxaddinput.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxaddinput_CFLAGS) $(CFLAGS) -MT dmxaddinput-dmxaddinput.obj -MD -MP -MF $(DEPDIR)/dmxaddinput-dmxaddinput.Tpo -c -o dmxaddinput-dmxaddinput.obj `if test -f 'dmxaddinput.c'; then $(CYGPATH_W) 'dmxaddinput.c'; else $(CYGPATH_W) '$(srcdir)/dmxaddinput.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxaddinput-dmxaddinput.Tpo $(DEPDIR)/dmxaddinput-dmxaddinput.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxaddinput-dmxaddinput.Tpo $(DEPDIR)/dmxaddinput-dmxaddinput.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxaddinput.c' object='dmxaddinput-dmxaddinput.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxaddinput_CFLAGS) $(CFLAGS) -c -o dmxaddinput-dmxaddinput.obj `if test -f 'dmxaddinput.c'; then $(CYGPATH_W) 'dmxaddinput.c'; else $(CYGPATH_W) '$(srcdir)/dmxaddinput.c'; fi`
 
 dmxaddscreen-dmxaddscreen.o: dmxaddscreen.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxaddscreen_CFLAGS) $(CFLAGS) -MT dmxaddscreen-dmxaddscreen.o -MD -MP -MF $(DEPDIR)/dmxaddscreen-dmxaddscreen.Tpo -c -o dmxaddscreen-dmxaddscreen.o `test -f 'dmxaddscreen.c' || echo '$(srcdir)/'`dmxaddscreen.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxaddscreen-dmxaddscreen.Tpo $(DEPDIR)/dmxaddscreen-dmxaddscreen.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxaddscreen-dmxaddscreen.Tpo $(DEPDIR)/dmxaddscreen-dmxaddscreen.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxaddscreen.c' object='dmxaddscreen-dmxaddscreen.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxaddscreen_CFLAGS) $(CFLAGS) -c -o dmxaddscreen-dmxaddscreen.o `test -f 'dmxaddscreen.c' || echo '$(srcdir)/'`dmxaddscreen.c
 
 dmxaddscreen-dmxaddscreen.obj: dmxaddscreen.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxaddscreen_CFLAGS) $(CFLAGS) -MT dmxaddscreen-dmxaddscreen.obj -MD -MP -MF $(DEPDIR)/dmxaddscreen-dmxaddscreen.Tpo -c -o dmxaddscreen-dmxaddscreen.obj `if test -f 'dmxaddscreen.c'; then $(CYGPATH_W) 'dmxaddscreen.c'; else $(CYGPATH_W) '$(srcdir)/dmxaddscreen.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxaddscreen-dmxaddscreen.Tpo $(DEPDIR)/dmxaddscreen-dmxaddscreen.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxaddscreen-dmxaddscreen.Tpo $(DEPDIR)/dmxaddscreen-dmxaddscreen.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxaddscreen.c' object='dmxaddscreen-dmxaddscreen.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxaddscreen_CFLAGS) $(CFLAGS) -c -o dmxaddscreen-dmxaddscreen.obj `if test -f 'dmxaddscreen.c'; then $(CYGPATH_W) 'dmxaddscreen.c'; else $(CYGPATH_W) '$(srcdir)/dmxaddscreen.c'; fi`
 
 dmxreconfig-dmxreconfig.o: dmxreconfig.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxreconfig_CFLAGS) $(CFLAGS) -MT dmxreconfig-dmxreconfig.o -MD -MP -MF $(DEPDIR)/dmxreconfig-dmxreconfig.Tpo -c -o dmxreconfig-dmxreconfig.o `test -f 'dmxreconfig.c' || echo '$(srcdir)/'`dmxreconfig.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxreconfig-dmxreconfig.Tpo $(DEPDIR)/dmxreconfig-dmxreconfig.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxreconfig-dmxreconfig.Tpo $(DEPDIR)/dmxreconfig-dmxreconfig.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxreconfig.c' object='dmxreconfig-dmxreconfig.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxreconfig_CFLAGS) $(CFLAGS) -c -o dmxreconfig-dmxreconfig.o `test -f 'dmxreconfig.c' || echo '$(srcdir)/'`dmxreconfig.c
 
 dmxreconfig-dmxreconfig.obj: dmxreconfig.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxreconfig_CFLAGS) $(CFLAGS) -MT dmxreconfig-dmxreconfig.obj -MD -MP -MF $(DEPDIR)/dmxreconfig-dmxreconfig.Tpo -c -o dmxreconfig-dmxreconfig.obj `if test -f 'dmxreconfig.c'; then $(CYGPATH_W) 'dmxreconfig.c'; else $(CYGPATH_W) '$(srcdir)/dmxreconfig.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxreconfig-dmxreconfig.Tpo $(DEPDIR)/dmxreconfig-dmxreconfig.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxreconfig-dmxreconfig.Tpo $(DEPDIR)/dmxreconfig-dmxreconfig.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxreconfig.c' object='dmxreconfig-dmxreconfig.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxreconfig_CFLAGS) $(CFLAGS) -c -o dmxreconfig-dmxreconfig.obj `if test -f 'dmxreconfig.c'; then $(CYGPATH_W) 'dmxreconfig.c'; else $(CYGPATH_W) '$(srcdir)/dmxreconfig.c'; fi`
 
 dmxresize-dmxresize.o: dmxresize.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxresize_CFLAGS) $(CFLAGS) -MT dmxresize-dmxresize.o -MD -MP -MF $(DEPDIR)/dmxresize-dmxresize.Tpo -c -o dmxresize-dmxresize.o `test -f 'dmxresize.c' || echo '$(srcdir)/'`dmxresize.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxresize-dmxresize.Tpo $(DEPDIR)/dmxresize-dmxresize.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxresize-dmxresize.Tpo $(DEPDIR)/dmxresize-dmxresize.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxresize.c' object='dmxresize-dmxresize.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxresize_CFLAGS) $(CFLAGS) -c -o dmxresize-dmxresize.o `test -f 'dmxresize.c' || echo '$(srcdir)/'`dmxresize.c
 
 dmxresize-dmxresize.obj: dmxresize.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxresize_CFLAGS) $(CFLAGS) -MT dmxresize-dmxresize.obj -MD -MP -MF $(DEPDIR)/dmxresize-dmxresize.Tpo -c -o dmxresize-dmxresize.obj `if test -f 'dmxresize.c'; then $(CYGPATH_W) 'dmxresize.c'; else $(CYGPATH_W) '$(srcdir)/dmxresize.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxresize-dmxresize.Tpo $(DEPDIR)/dmxresize-dmxresize.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxresize-dmxresize.Tpo $(DEPDIR)/dmxresize-dmxresize.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxresize.c' object='dmxresize-dmxresize.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxresize_CFLAGS) $(CFLAGS) -c -o dmxresize-dmxresize.obj `if test -f 'dmxresize.c'; then $(CYGPATH_W) 'dmxresize.c'; else $(CYGPATH_W) '$(srcdir)/dmxresize.c'; fi`
 
 dmxrminput-dmxrminput.o: dmxrminput.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxrminput_CFLAGS) $(CFLAGS) -MT dmxrminput-dmxrminput.o -MD -MP -MF $(DEPDIR)/dmxrminput-dmxrminput.Tpo -c -o dmxrminput-dmxrminput.o `test -f 'dmxrminput.c' || echo '$(srcdir)/'`dmxrminput.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxrminput-dmxrminput.Tpo $(DEPDIR)/dmxrminput-dmxrminput.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxrminput-dmxrminput.Tpo $(DEPDIR)/dmxrminput-dmxrminput.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxrminput.c' object='dmxrminput-dmxrminput.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxrminput_CFLAGS) $(CFLAGS) -c -o dmxrminput-dmxrminput.o `test -f 'dmxrminput.c' || echo '$(srcdir)/'`dmxrminput.c
 
 dmxrminput-dmxrminput.obj: dmxrminput.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxrminput_CFLAGS) $(CFLAGS) -MT dmxrminput-dmxrminput.obj -MD -MP -MF $(DEPDIR)/dmxrminput-dmxrminput.Tpo -c -o dmxrminput-dmxrminput.obj `if test -f 'dmxrminput.c'; then $(CYGPATH_W) 'dmxrminput.c'; else $(CYGPATH_W) '$(srcdir)/dmxrminput.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxrminput-dmxrminput.Tpo $(DEPDIR)/dmxrminput-dmxrminput.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxrminput-dmxrminput.Tpo $(DEPDIR)/dmxrminput-dmxrminput.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxrminput.c' object='dmxrminput-dmxrminput.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxrminput_CFLAGS) $(CFLAGS) -c -o dmxrminput-dmxrminput.obj `if test -f 'dmxrminput.c'; then $(CYGPATH_W) 'dmxrminput.c'; else $(CYGPATH_W) '$(srcdir)/dmxrminput.c'; fi`
 
 dmxrmscreen-dmxrmscreen.o: dmxrmscreen.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxrmscreen_CFLAGS) $(CFLAGS) -MT dmxrmscreen-dmxrmscreen.o -MD -MP -MF $(DEPDIR)/dmxrmscreen-dmxrmscreen.Tpo -c -o dmxrmscreen-dmxrmscreen.o `test -f 'dmxrmscreen.c' || echo '$(srcdir)/'`dmxrmscreen.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxrmscreen-dmxrmscreen.Tpo $(DEPDIR)/dmxrmscreen-dmxrmscreen.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxrmscreen-dmxrmscreen.Tpo $(DEPDIR)/dmxrmscreen-dmxrmscreen.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxrmscreen.c' object='dmxrmscreen-dmxrmscreen.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxrmscreen_CFLAGS) $(CFLAGS) -c -o dmxrmscreen-dmxrmscreen.o `test -f 'dmxrmscreen.c' || echo '$(srcdir)/'`dmxrmscreen.c
 
 dmxrmscreen-dmxrmscreen.obj: dmxrmscreen.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxrmscreen_CFLAGS) $(CFLAGS) -MT dmxrmscreen-dmxrmscreen.obj -MD -MP -MF $(DEPDIR)/dmxrmscreen-dmxrmscreen.Tpo -c -o dmxrmscreen-dmxrmscreen.obj `if test -f 'dmxrmscreen.c'; then $(CYGPATH_W) 'dmxrmscreen.c'; else $(CYGPATH_W) '$(srcdir)/dmxrmscreen.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxrmscreen-dmxrmscreen.Tpo $(DEPDIR)/dmxrmscreen-dmxrmscreen.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxrmscreen-dmxrmscreen.Tpo $(DEPDIR)/dmxrmscreen-dmxrmscreen.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxrmscreen.c' object='dmxrmscreen-dmxrmscreen.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxrmscreen_CFLAGS) $(CFLAGS) -c -o dmxrmscreen-dmxrmscreen.obj `if test -f 'dmxrmscreen.c'; then $(CYGPATH_W) 'dmxrmscreen.c'; else $(CYGPATH_W) '$(srcdir)/dmxrmscreen.c'; fi`
 
 dmxwininfo-dmxwininfo.o: dmxwininfo.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxwininfo_CFLAGS) $(CFLAGS) -MT dmxwininfo-dmxwininfo.o -MD -MP -MF $(DEPDIR)/dmxwininfo-dmxwininfo.Tpo -c -o dmxwininfo-dmxwininfo.o `test -f 'dmxwininfo.c' || echo '$(srcdir)/'`dmxwininfo.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxwininfo-dmxwininfo.Tpo $(DEPDIR)/dmxwininfo-dmxwininfo.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxwininfo-dmxwininfo.Tpo $(DEPDIR)/dmxwininfo-dmxwininfo.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxwininfo.c' object='dmxwininfo-dmxwininfo.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxwininfo_CFLAGS) $(CFLAGS) -c -o dmxwininfo-dmxwininfo.o `test -f 'dmxwininfo.c' || echo '$(srcdir)/'`dmxwininfo.c
 
 dmxwininfo-dmxwininfo.obj: dmxwininfo.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxwininfo_CFLAGS) $(CFLAGS) -MT dmxwininfo-dmxwininfo.obj -MD -MP -MF $(DEPDIR)/dmxwininfo-dmxwininfo.Tpo -c -o dmxwininfo-dmxwininfo.obj `if test -f 'dmxwininfo.c'; then $(CYGPATH_W) 'dmxwininfo.c'; else $(CYGPATH_W) '$(srcdir)/dmxwininfo.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dmxwininfo-dmxwininfo.Tpo $(DEPDIR)/dmxwininfo-dmxwininfo.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dmxwininfo-dmxwininfo.Tpo $(DEPDIR)/dmxwininfo-dmxwininfo.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dmxwininfo.c' object='dmxwininfo-dmxwininfo.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dmxwininfo_CFLAGS) $(CFLAGS) -c -o dmxwininfo-dmxwininfo.obj `if test -f 'dmxwininfo.c'; then $(CYGPATH_W) 'dmxwininfo.c'; else $(CYGPATH_W) '$(srcdir)/dmxwininfo.c'; fi`
 
 ev-ev.o: ev.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ev_CFLAGS) $(CFLAGS) -MT ev-ev.o -MD -MP -MF $(DEPDIR)/ev-ev.Tpo -c -o ev-ev.o `test -f 'ev.c' || echo '$(srcdir)/'`ev.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/ev-ev.Tpo $(DEPDIR)/ev-ev.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/ev-ev.Tpo $(DEPDIR)/ev-ev.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ev.c' object='ev-ev.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ev_CFLAGS) $(CFLAGS) -c -o ev-ev.o `test -f 'ev.c' || echo '$(srcdir)/'`ev.c
 
 ev-ev.obj: ev.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ev_CFLAGS) $(CFLAGS) -MT ev-ev.obj -MD -MP -MF $(DEPDIR)/ev-ev.Tpo -c -o ev-ev.obj `if test -f 'ev.c'; then $(CYGPATH_W) 'ev.c'; else $(CYGPATH_W) '$(srcdir)/ev.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/ev-ev.Tpo $(DEPDIR)/ev-ev.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/ev-ev.Tpo $(DEPDIR)/ev-ev.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ev.c' object='ev-ev.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ev_CFLAGS) $(CFLAGS) -c -o ev-ev.obj `if test -f 'ev.c'; then $(CYGPATH_W) 'ev.c'; else $(CYGPATH_W) '$(srcdir)/ev.c'; fi`
 
 evi-evi.o: evi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(evi_CFLAGS) $(CFLAGS) -MT evi-evi.o -MD -MP -MF $(DEPDIR)/evi-evi.Tpo -c -o evi-evi.o `test -f 'evi.c' || echo '$(srcdir)/'`evi.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/evi-evi.Tpo $(DEPDIR)/evi-evi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/evi-evi.Tpo $(DEPDIR)/evi-evi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='evi.c' object='evi-evi.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(evi_CFLAGS) $(CFLAGS) -c -o evi-evi.o `test -f 'evi.c' || echo '$(srcdir)/'`evi.c
 
 evi-evi.obj: evi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(evi_CFLAGS) $(CFLAGS) -MT evi-evi.obj -MD -MP -MF $(DEPDIR)/evi-evi.Tpo -c -o evi-evi.obj `if test -f 'evi.c'; then $(CYGPATH_W) 'evi.c'; else $(CYGPATH_W) '$(srcdir)/evi.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/evi-evi.Tpo $(DEPDIR)/evi-evi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/evi-evi.Tpo $(DEPDIR)/evi-evi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='evi.c' object='evi-evi.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(evi_CFLAGS) $(CFLAGS) -c -o evi-evi.obj `if test -f 'evi.c'; then $(CYGPATH_W) 'evi.c'; else $(CYGPATH_W) '$(srcdir)/evi.c'; fi`
 
 res-res.o: res.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(res_CFLAGS) $(CFLAGS) -MT res-res.o -MD -MP -MF $(DEPDIR)/res-res.Tpo -c -o res-res.o `test -f 'res.c' || echo '$(srcdir)/'`res.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/res-res.Tpo $(DEPDIR)/res-res.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/res-res.Tpo $(DEPDIR)/res-res.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='res.c' object='res-res.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(res_CFLAGS) $(CFLAGS) -c -o res-res.o `test -f 'res.c' || echo '$(srcdir)/'`res.c
 
 res-res.obj: res.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(res_CFLAGS) $(CFLAGS) -MT res-res.obj -MD -MP -MF $(DEPDIR)/res-res.Tpo -c -o res-res.obj `if test -f 'res.c'; then $(CYGPATH_W) 'res.c'; else $(CYGPATH_W) '$(srcdir)/res.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/res-res.Tpo $(DEPDIR)/res-res.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/res-res.Tpo $(DEPDIR)/res-res.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='res.c' object='res-res.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(res_CFLAGS) $(CFLAGS) -c -o res-res.obj `if test -f 'res.c'; then $(CYGPATH_W) 'res.c'; else $(CYGPATH_W) '$(srcdir)/res.c'; fi`
 
 xbell-xbell.o: xbell.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xbell_CFLAGS) $(CFLAGS) -MT xbell-xbell.o -MD -MP -MF $(DEPDIR)/xbell-xbell.Tpo -c -o xbell-xbell.o `test -f 'xbell.c' || echo '$(srcdir)/'`xbell.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xbell-xbell.Tpo $(DEPDIR)/xbell-xbell.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xbell-xbell.Tpo $(DEPDIR)/xbell-xbell.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xbell.c' object='xbell-xbell.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xbell_CFLAGS) $(CFLAGS) -c -o xbell-xbell.o `test -f 'xbell.c' || echo '$(srcdir)/'`xbell.c
 
 xbell-xbell.obj: xbell.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xbell_CFLAGS) $(CFLAGS) -MT xbell-xbell.obj -MD -MP -MF $(DEPDIR)/xbell-xbell.Tpo -c -o xbell-xbell.obj `if test -f 'xbell.c'; then $(CYGPATH_W) 'xbell.c'; else $(CYGPATH_W) '$(srcdir)/xbell.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xbell-xbell.Tpo $(DEPDIR)/xbell-xbell.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xbell-xbell.Tpo $(DEPDIR)/xbell-xbell.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xbell.c' object='xbell-xbell.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xbell_CFLAGS) $(CFLAGS) -c -o xbell-xbell.obj `if test -f 'xbell.c'; then $(CYGPATH_W) 'xbell.c'; else $(CYGPATH_W) '$(srcdir)/xbell.c'; fi`
 
 xdmx-xdmx.o: xdmx.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmx_CFLAGS) $(CFLAGS) -MT xdmx-xdmx.o -MD -MP -MF $(DEPDIR)/xdmx-xdmx.Tpo -c -o xdmx-xdmx.o `test -f 'xdmx.c' || echo '$(srcdir)/'`xdmx.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xdmx-xdmx.Tpo $(DEPDIR)/xdmx-xdmx.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xdmx-xdmx.Tpo $(DEPDIR)/xdmx-xdmx.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xdmx.c' object='xdmx-xdmx.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmx_CFLAGS) $(CFLAGS) -c -o xdmx-xdmx.o `test -f 'xdmx.c' || echo '$(srcdir)/'`xdmx.c
 
 xdmx-xdmx.obj: xdmx.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmx_CFLAGS) $(CFLAGS) -MT xdmx-xdmx.obj -MD -MP -MF $(DEPDIR)/xdmx-xdmx.Tpo -c -o xdmx-xdmx.obj `if test -f 'xdmx.c'; then $(CYGPATH_W) 'xdmx.c'; else $(CYGPATH_W) '$(srcdir)/xdmx.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xdmx-xdmx.Tpo $(DEPDIR)/xdmx-xdmx.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xdmx-xdmx.Tpo $(DEPDIR)/xdmx-xdmx.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xdmx.c' object='xdmx-xdmx.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xdmx_CFLAGS) $(CFLAGS) -c -o xdmx-xdmx.obj `if test -f 'xdmx.c'; then $(CYGPATH_W) 'xdmx.c'; else $(CYGPATH_W) '$(srcdir)/xdmx.c'; fi`
 
 xinput-xinput.o: xinput.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xinput_CFLAGS) $(CFLAGS) -MT xinput-xinput.o -MD -MP -MF $(DEPDIR)/xinput-xinput.Tpo -c -o xinput-xinput.o `test -f 'xinput.c' || echo '$(srcdir)/'`xinput.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xinput-xinput.Tpo $(DEPDIR)/xinput-xinput.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xinput-xinput.Tpo $(DEPDIR)/xinput-xinput.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xinput.c' object='xinput-xinput.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xinput_CFLAGS) $(CFLAGS) -c -o xinput-xinput.o `test -f 'xinput.c' || echo '$(srcdir)/'`xinput.c
 
 xinput-xinput.obj: xinput.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xinput_CFLAGS) $(CFLAGS) -MT xinput-xinput.obj -MD -MP -MF $(DEPDIR)/xinput-xinput.Tpo -c -o xinput-xinput.obj `if test -f 'xinput.c'; then $(CYGPATH_W) 'xinput.c'; else $(CYGPATH_W) '$(srcdir)/xinput.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xinput-xinput.Tpo $(DEPDIR)/xinput-xinput.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xinput-xinput.Tpo $(DEPDIR)/xinput-xinput.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xinput.c' object='xinput-xinput.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xinput_CFLAGS) $(CFLAGS) -c -o xinput-xinput.obj `if test -f 'xinput.c'; then $(CYGPATH_W) 'xinput.c'; else $(CYGPATH_W) '$(srcdir)/xinput.c'; fi`
 
 xled-xled.o: xled.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xled_CFLAGS) $(CFLAGS) -MT xled-xled.o -MD -MP -MF $(DEPDIR)/xled-xled.Tpo -c -o xled-xled.o `test -f 'xled.c' || echo '$(srcdir)/'`xled.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xled-xled.Tpo $(DEPDIR)/xled-xled.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xled-xled.Tpo $(DEPDIR)/xled-xled.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xled.c' object='xled-xled.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xled_CFLAGS) $(CFLAGS) -c -o xled-xled.o `test -f 'xled.c' || echo '$(srcdir)/'`xled.c
 
 xled-xled.obj: xled.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xled_CFLAGS) $(CFLAGS) -MT xled-xled.obj -MD -MP -MF $(DEPDIR)/xled-xled.Tpo -c -o xled-xled.obj `if test -f 'xled.c'; then $(CYGPATH_W) 'xled.c'; else $(CYGPATH_W) '$(srcdir)/xled.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xled-xled.Tpo $(DEPDIR)/xled-xled.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xled-xled.Tpo $(DEPDIR)/xled-xled.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xled.c' object='xled-xled.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xled_CFLAGS) $(CFLAGS) -c -o xled-xled.obj `if test -f 'xled.c'; then $(CYGPATH_W) 'xled.c'; else $(CYGPATH_W) '$(srcdir)/xled.c'; fi`
 
 xtest-xtest.o: xtest.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xtest_CFLAGS) $(CFLAGS) -MT xtest-xtest.o -MD -MP -MF $(DEPDIR)/xtest-xtest.Tpo -c -o xtest-xtest.o `test -f 'xtest.c' || echo '$(srcdir)/'`xtest.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xtest-xtest.Tpo $(DEPDIR)/xtest-xtest.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xtest-xtest.Tpo $(DEPDIR)/xtest-xtest.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xtest.c' object='xtest-xtest.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xtest_CFLAGS) $(CFLAGS) -c -o xtest-xtest.o `test -f 'xtest.c' || echo '$(srcdir)/'`xtest.c
 
 xtest-xtest.obj: xtest.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xtest_CFLAGS) $(CFLAGS) -MT xtest-xtest.obj -MD -MP -MF $(DEPDIR)/xtest-xtest.Tpo -c -o xtest-xtest.obj `if test -f 'xtest.c'; then $(CYGPATH_W) 'xtest.c'; else $(CYGPATH_W) '$(srcdir)/xtest.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xtest-xtest.Tpo $(DEPDIR)/xtest-xtest.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xtest-xtest.Tpo $(DEPDIR)/xtest-xtest.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xtest.c' object='xtest-xtest.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xtest_CFLAGS) $(CFLAGS) -c -o xtest-xtest.obj `if test -f 'xtest.c'; then $(CYGPATH_W) 'xtest.c'; else $(CYGPATH_W) '$(srcdir)/xtest.c'; fi`
@@ -880,7 +902,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -888,29 +910,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -931,13 +958,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -968,6 +999,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -989,6 +1021,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -997,18 +1031,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -1047,6 +1091,7 @@ uninstall-am: uninstall-binPROGRAMS
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am uninstall-binPROGRAMS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/dmx/glxProxy/Makefile.in b/xorg-server/hw/dmx/glxProxy/Makefile.in
index 3575f1e31..e71ed7362 100644
--- a/xorg-server/hw/dmx/glxProxy/Makefile.in
+++ b/xorg-server/hw/dmx/glxProxy/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libglxproxy_a_AR = $(AR) $(ARFLAGS)
@@ -63,6 +66,7 @@ libglxproxy_a_OBJECTS = $(am_libglxproxy_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -205,6 +209,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -408,9 +413,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/dmx/glxProxy/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/dmx/glxProxy/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/dmx/glxProxy/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/dmx/glxProxy/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -428,6 +433,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -461,21 +467,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -498,7 +504,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -506,29 +512,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -549,13 +560,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -583,6 +598,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -604,6 +620,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -612,18 +630,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -661,6 +689,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/dmx/input/Makefile.in b/xorg-server/hw/dmx/input/Makefile.in
index 472017165..ca7d43b57 100644
--- a/xorg-server/hw/dmx/input/Makefile.in
+++ b/xorg-server/hw/dmx/input/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libdmxinput_a_AR = $(AR) $(ARFLAGS)
@@ -77,6 +80,7 @@ libdmxinput_a_OBJECTS = $(am_libdmxinput_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -219,6 +223,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -440,9 +445,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/dmx/input/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/dmx/input/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/dmx/input/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/dmx/input/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -460,6 +465,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -497,21 +503,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -534,7 +540,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -542,29 +548,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -585,13 +596,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -619,6 +634,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -640,6 +656,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -648,18 +666,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -697,6 +725,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/kdrive/Makefile.in b/xorg-server/hw/kdrive/Makefile.in
index c38e03de8..6b3799ef9 100644
--- a/xorg-server/hw/kdrive/Makefile.in
+++ b/xorg-server/hw/kdrive/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,6 +49,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -58,9 +61,37 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -192,6 +223,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -367,9 +399,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/kdrive/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/kdrive/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/kdrive/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/kdrive/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -387,6 +419,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -418,7 +451,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -452,16 +485,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -476,7 +509,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -488,7 +521,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -497,29 +530,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -540,29 +578,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -592,6 +645,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -610,6 +664,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -618,18 +674,28 @@ install-data-am:
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -650,8 +716,8 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -670,6 +736,7 @@ uninstall-am:
 
 relink:
 	@for i in $(SERVER_SUBDIRS) ; do make -C $$i relink ; done
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/kdrive/ephyr/Makefile.in b/xorg-server/hw/kdrive/ephyr/Makefile.in
index a996d19e6..af425f7e4 100644
--- a/xorg-server/hw/kdrive/ephyr/Makefile.in
+++ b/xorg-server/hw/kdrive/ephyr/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -22,8 +23,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -56,6 +58,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libxephyr_hostdri_a_AR = $(AR) $(ARFLAGS)
@@ -85,7 +88,6 @@ am__objects_4 = ephyr.$(OBJEXT) ephyr_draw.$(OBJEXT) os.$(OBJEXT)
 am_libxephyr_a_OBJECTS = $(am__objects_4)
 libxephyr_a_OBJECTS = $(am_libxephyr_a_OBJECTS)
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_Xephyr_OBJECTS = ephyrinit.$(OBJEXT)
 Xephyr_OBJECTS = $(am_Xephyr_OBJECTS)
@@ -95,6 +97,7 @@ Xephyr_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -113,8 +116,22 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-appmanDATA_INSTALL = $(INSTALL_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 DATA = $(appman_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -250,6 +267,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -516,9 +534,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/kdrive/ephyr/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/kdrive/ephyr/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/kdrive/ephyr/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/kdrive/ephyr/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -536,6 +554,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -558,31 +577,46 @@ libxephyr.a: $(libxephyr_a_OBJECTS) $(libxephyr_a_DEPENDENCIES)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Xephyr$(EXEEXT): $(Xephyr_OBJECTS) $(Xephyr_DEPENDENCIES) 
 	@rm -f Xephyr$(EXEEXT)
 	$(Xephyr_LINK) $(Xephyr_OBJECTS) $(Xephyr_LDADD) $(LIBS)
@@ -608,21 +642,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -635,20 +669,23 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -662,7 +699,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -670,29 +707,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -713,13 +755,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -751,6 +797,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -772,6 +819,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -780,18 +829,28 @@ install-data-am: install-appmanDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -844,6 +903,7 @@ Xephyr.$(APP_MAN_SUFFIX): Xephyr.man
 
 .man.pre.man:
 	$(RAWCPP) $(RAWCPPFLAGS) $(MANDEFS) $(EXTRAMANDEFS) < $< | $(CPP_SED_MAGIC) > $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/kdrive/fake/Makefile.in b/xorg-server/hw/kdrive/fake/Makefile.in
index 111f8ccc9..f3e4b7994 100644
--- a/xorg-server/hw/kdrive/fake/Makefile.in
+++ b/xorg-server/hw/kdrive/fake/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libfake_a_AR = $(AR) $(ARFLAGS)
@@ -58,7 +61,6 @@ am_libfake_a_OBJECTS = fake.$(OBJEXT) kbd.$(OBJEXT) os.$(OBJEXT) \
 	mouse.$(OBJEXT)
 libfake_a_OBJECTS = $(am_libfake_a_OBJECTS)
 am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_Xfake_OBJECTS = fakeinit.$(OBJEXT)
 Xfake_OBJECTS = $(am_Xfake_OBJECTS)
@@ -68,6 +70,7 @@ Xfake_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -210,6 +213,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -394,9 +398,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/kdrive/fake/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/kdrive/fake/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/kdrive/fake/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/kdrive/fake/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -414,6 +418,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -424,31 +429,46 @@ libfake.a: $(libfake_a_OBJECTS) $(libfake_a_DEPENDENCIES)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Xfake$(EXEEXT): $(Xfake_OBJECTS) $(Xfake_DEPENDENCIES) 
 	@rm -f Xfake$(EXEEXT)
 	$(Xfake_LINK) $(Xfake_OBJECTS) $(Xfake_LDADD) $(LIBS)
@@ -467,21 +487,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -504,7 +524,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -512,29 +532,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -555,13 +580,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -592,6 +621,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -613,6 +643,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -621,18 +653,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -674,6 +716,7 @@ uninstall-am: uninstall-binPROGRAMS
 
 relink:
 	rm -f $(bin_PROGRAMS) && make $(bin_PROGRAMS)
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/kdrive/fbdev/Makefile.in b/xorg-server/hw/kdrive/fbdev/Makefile.in
index d021a88f1..a59ce62dd 100644
--- a/xorg-server/hw/kdrive/fbdev/Makefile.in
+++ b/xorg-server/hw/kdrive/fbdev/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libfbdev_a_AR = $(AR) $(ARFLAGS)
@@ -57,7 +60,6 @@ libfbdev_a_LIBADD =
 am_libfbdev_a_OBJECTS = fbdev.$(OBJEXT)
 libfbdev_a_OBJECTS = $(am_libfbdev_a_OBJECTS)
 am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am__Xfbdev_SOURCES_DIST = fbinit.c
 @KDRIVEFBDEV_TRUE@am_Xfbdev_OBJECTS = fbinit.$(OBJEXT)
@@ -68,6 +70,7 @@ Xfbdev_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -210,6 +213,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -390,9 +394,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/kdrive/fbdev/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/kdrive/fbdev/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/kdrive/fbdev/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/kdrive/fbdev/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -410,6 +414,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -420,31 +425,46 @@ libfbdev.a: $(libfbdev_a_OBJECTS) $(libfbdev_a_DEPENDENCIES)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Xfbdev$(EXEEXT): $(Xfbdev_OBJECTS) $(Xfbdev_DEPENDENCIES) 
 	@rm -f Xfbdev$(EXEEXT)
 	$(Xfbdev_LINK) $(Xfbdev_OBJECTS) $(Xfbdev_LDADD) $(LIBS)
@@ -460,21 +480,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -497,7 +517,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -505,29 +525,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -548,13 +573,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -585,6 +614,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -606,6 +636,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -614,18 +646,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -667,6 +709,7 @@ uninstall-am: uninstall-binPROGRAMS
 
 @KDRIVEFBDEV_TRUE@relink:
 @KDRIVEFBDEV_TRUE@	rm -f $(bin_PROGRAMS) && make $(bin_PROGRAMS)
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/kdrive/linux/Makefile.in b/xorg-server/hw/kdrive/linux/Makefile.in
index 7615299c3..717965e53 100644
--- a/xorg-server/hw/kdrive/linux/Makefile.in
+++ b/xorg-server/hw/kdrive/linux/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 liblinux_a_AR = $(AR) $(ARFLAGS)
@@ -63,6 +66,7 @@ liblinux_a_OBJECTS = $(am_liblinux_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -205,6 +209,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -387,9 +392,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/kdrive/linux/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/kdrive/linux/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/kdrive/linux/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/kdrive/linux/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -407,6 +412,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -433,21 +439,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -470,7 +476,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -478,29 +484,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -521,13 +532,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -555,6 +570,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -576,6 +592,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -584,18 +602,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -633,6 +661,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/kdrive/sdl/Makefile.in b/xorg-server/hw/kdrive/sdl/Makefile.in
index 8b270558b..c99bb4f2d 100644
--- a/xorg-server/hw/kdrive/sdl/Makefile.in
+++ b/xorg-server/hw/kdrive/sdl/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -49,8 +51,8 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_Xsdl_OBJECTS = sdl.$(OBJEXT)
 Xsdl_OBJECTS = $(am_Xsdl_OBJECTS)
@@ -60,6 +62,7 @@ Xsdl_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -202,6 +205,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -373,9 +377,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/kdrive/sdl/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/kdrive/sdl/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/kdrive/sdl/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/kdrive/sdl/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -393,34 +397,50 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Xsdl$(EXEEXT): $(Xsdl_OBJECTS) $(Xsdl_DEPENDENCIES) 
 	@rm -f Xsdl$(EXEEXT)
 	$(Xsdl_LINK) $(Xsdl_OBJECTS) $(Xsdl_LDADD) $(LIBS)
@@ -435,21 +455,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -472,7 +492,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -480,29 +500,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -523,13 +548,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -560,6 +589,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -580,6 +610,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -588,18 +620,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -641,6 +683,7 @@ uninstall-am: uninstall-binPROGRAMS
 
 relink:
 	rm -f $(bin_PROGRAMS) && make $(bin_PROGRAMS)
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/kdrive/src/Makefile.in b/xorg-server/hw/kdrive/src/Makefile.in
index 3d0af42c7..1b10fce31 100644
--- a/xorg-server/hw/kdrive/src/Makefile.in
+++ b/xorg-server/hw/kdrive/src/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libkdrive_a_AR = $(AR) $(ARFLAGS)
@@ -70,6 +73,7 @@ libkdrivestubs_a_OBJECTS = $(am_libkdrivestubs_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -213,6 +217,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -405,9 +410,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/kdrive/src/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/kdrive/src/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/kdrive/src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/kdrive/src/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -425,6 +430,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -459,49 +465,49 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 miinitext.o: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.o -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
 
 miinitext.obj: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.obj -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
 
 fbcmap_mi.o: $(top_srcdir)/fb/fbcmap_mi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbcmap_mi.o -MD -MP -MF $(DEPDIR)/fbcmap_mi.Tpo -c -o fbcmap_mi.o `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='fbcmap_mi.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbcmap_mi.o `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
 
 fbcmap_mi.obj: $(top_srcdir)/fb/fbcmap_mi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbcmap_mi.obj -MD -MP -MF $(DEPDIR)/fbcmap_mi.Tpo -c -o fbcmap_mi.obj `if test -f '$(top_srcdir)/fb/fbcmap_mi.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap_mi.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap_mi.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='fbcmap_mi.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbcmap_mi.obj `if test -f '$(top_srcdir)/fb/fbcmap_mi.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap_mi.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap_mi.c'; fi`
@@ -524,7 +530,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -532,29 +538,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -575,13 +586,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -609,6 +624,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -630,6 +646,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -638,18 +656,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -687,6 +715,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/vfb/Makefile.in b/xorg-server/hw/vfb/Makefile.in
index 242a8b557..fb4733903 100644
--- a/xorg-server/hw/vfb/Makefile.in
+++ b/xorg-server/hw/vfb/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -22,8 +23,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -56,6 +58,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libfbcmap_a_AR = $(AR) $(ARFLAGS)
@@ -63,7 +66,6 @@ libfbcmap_a_LIBADD =
 am_libfbcmap_a_OBJECTS = libfbcmap_a-fbcmap_mi.$(OBJEXT)
 libfbcmap_a_OBJECTS = $(am_libfbcmap_a_OBJECTS)
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am__objects_1 = InitInput.$(OBJEXT) InitOutput.$(OBJEXT) \
 	dpmsstubs.$(OBJEXT) stubs.$(OBJEXT) miinitext.$(OBJEXT)
@@ -77,6 +79,7 @@ Xvfb_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -90,8 +93,22 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-appmanDATA_INSTALL = $(INSTALL_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 DATA = $(appman_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -227,6 +244,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -453,9 +471,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/vfb/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/vfb/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/vfb/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/vfb/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -473,6 +491,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -483,31 +502,46 @@ libfbcmap.a: $(libfbcmap_a_OBJECTS) $(libfbcmap_a_DEPENDENCIES)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Xvfb$(EXEEXT): $(Xvfb_OBJECTS) $(Xvfb_DEPENDENCIES) 
 	@rm -f Xvfb$(EXEEXT)
 	$(Xvfb_LINK) $(Xvfb_OBJECTS) $(Xvfb_LDADD) $(LIBS)
@@ -527,77 +561,77 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 libfbcmap_a-fbcmap_mi.o: $(top_srcdir)/fb/fbcmap_mi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfbcmap_a_CFLAGS) $(CFLAGS) -MT libfbcmap_a-fbcmap_mi.o -MD -MP -MF $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo -c -o libfbcmap_a-fbcmap_mi.o `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo $(DEPDIR)/libfbcmap_a-fbcmap_mi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo $(DEPDIR)/libfbcmap_a-fbcmap_mi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='libfbcmap_a-fbcmap_mi.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfbcmap_a_CFLAGS) $(CFLAGS) -c -o libfbcmap_a-fbcmap_mi.o `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
 
 libfbcmap_a-fbcmap_mi.obj: $(top_srcdir)/fb/fbcmap_mi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfbcmap_a_CFLAGS) $(CFLAGS) -MT libfbcmap_a-fbcmap_mi.obj -MD -MP -MF $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo -c -o libfbcmap_a-fbcmap_mi.obj `if test -f '$(top_srcdir)/fb/fbcmap_mi.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap_mi.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap_mi.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo $(DEPDIR)/libfbcmap_a-fbcmap_mi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo $(DEPDIR)/libfbcmap_a-fbcmap_mi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='libfbcmap_a-fbcmap_mi.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfbcmap_a_CFLAGS) $(CFLAGS) -c -o libfbcmap_a-fbcmap_mi.obj `if test -f '$(top_srcdir)/fb/fbcmap_mi.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap_mi.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap_mi.c'; fi`
 
 dpmsstubs.o: $(top_srcdir)/Xext/dpmsstubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dpmsstubs.o -MD -MP -MF $(DEPDIR)/dpmsstubs.Tpo -c -o dpmsstubs.o `test -f '$(top_srcdir)/Xext/dpmsstubs.c' || echo '$(srcdir)/'`$(top_srcdir)/Xext/dpmsstubs.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dpmsstubs.Tpo $(DEPDIR)/dpmsstubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dpmsstubs.Tpo $(DEPDIR)/dpmsstubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xext/dpmsstubs.c' object='dpmsstubs.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dpmsstubs.o `test -f '$(top_srcdir)/Xext/dpmsstubs.c' || echo '$(srcdir)/'`$(top_srcdir)/Xext/dpmsstubs.c
 
 dpmsstubs.obj: $(top_srcdir)/Xext/dpmsstubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dpmsstubs.obj -MD -MP -MF $(DEPDIR)/dpmsstubs.Tpo -c -o dpmsstubs.obj `if test -f '$(top_srcdir)/Xext/dpmsstubs.c'; then $(CYGPATH_W) '$(top_srcdir)/Xext/dpmsstubs.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xext/dpmsstubs.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dpmsstubs.Tpo $(DEPDIR)/dpmsstubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dpmsstubs.Tpo $(DEPDIR)/dpmsstubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xext/dpmsstubs.c' object='dpmsstubs.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dpmsstubs.obj `if test -f '$(top_srcdir)/Xext/dpmsstubs.c'; then $(CYGPATH_W) '$(top_srcdir)/Xext/dpmsstubs.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xext/dpmsstubs.c'; fi`
 
 stubs.o: $(top_srcdir)/Xi/stubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stubs.o -MD -MP -MF $(DEPDIR)/stubs.Tpo -c -o stubs.o `test -f '$(top_srcdir)/Xi/stubs.c' || echo '$(srcdir)/'`$(top_srcdir)/Xi/stubs.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/stubs.Tpo $(DEPDIR)/stubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/stubs.Tpo $(DEPDIR)/stubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xi/stubs.c' object='stubs.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stubs.o `test -f '$(top_srcdir)/Xi/stubs.c' || echo '$(srcdir)/'`$(top_srcdir)/Xi/stubs.c
 
 stubs.obj: $(top_srcdir)/Xi/stubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stubs.obj -MD -MP -MF $(DEPDIR)/stubs.Tpo -c -o stubs.obj `if test -f '$(top_srcdir)/Xi/stubs.c'; then $(CYGPATH_W) '$(top_srcdir)/Xi/stubs.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xi/stubs.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/stubs.Tpo $(DEPDIR)/stubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/stubs.Tpo $(DEPDIR)/stubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xi/stubs.c' object='stubs.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stubs.obj `if test -f '$(top_srcdir)/Xi/stubs.c'; then $(CYGPATH_W) '$(top_srcdir)/Xi/stubs.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xi/stubs.c'; fi`
 
 miinitext.o: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.o -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
 
 miinitext.obj: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.obj -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
@@ -610,20 +644,23 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -637,7 +674,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -645,29 +682,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -688,13 +730,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -728,6 +774,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -750,6 +797,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -758,18 +807,28 @@ install-data-am: install-appmanDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -792,7 +851,7 @@ ps-am:
 
 uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
 	clean-generic clean-libtool clean-noinstLIBRARIES ctags \
@@ -822,6 +881,7 @@ uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 
 relink:
 	rm -f Xvfb && $(MAKE) Xvfb
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/Makefile.in b/xorg-server/hw/xfree86/Makefile.in
index 4a49f8687..bf14751d7 100644
--- a/xorg-server/hw/xfree86/Makefile.in
+++ b/xorg-server/hw/xfree86/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -22,8 +23,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -60,13 +62,13 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libosandcommon_la_DEPENDENCIES = os-support/libxorgos.la \
 	common/libcommon.la
 am_libosandcommon_la_OBJECTS = osandcommon.lo
 libosandcommon_la_OBJECTS = $(am_libosandcommon_la_OBJECTS)
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(optionsdir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_Xorg_OBJECTS = xorg.$(OBJEXT)
 Xorg_OBJECTS = $(am_Xorg_OBJECTS)
@@ -83,6 +85,7 @@ Xorg_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -103,14 +106,56 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-dist_optionsDATA_INSTALL = $(INSTALL_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 DATA = $(dist_options_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -242,6 +287,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -495,9 +541,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -515,6 +561,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -529,31 +576,46 @@ libosandcommon.la: $(libosandcommon_la_OBJECTS) $(libosandcommon_la_DEPENDENCIES
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Xorg$(EXEEXT): $(Xorg_OBJECTS) $(Xorg_DEPENDENCIES) 
 	@rm -f Xorg$(EXEEXT)
 	$(Xorg_LINK) $(Xorg_OBJECTS) $(Xorg_LDADD) $(LIBS)
@@ -569,21 +631,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -596,20 +658,23 @@ clean-libtool:
 install-dist_optionsDATA: $(dist_options_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(optionsdir)" || $(MKDIR_P) "$(DESTDIR)$(optionsdir)"
-	@list='$(dist_options_DATA)'; for p in $$list; do \
+	@list='$(dist_options_DATA)'; test -n "$(optionsdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(dist_optionsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(optionsdir)/$$f'"; \
-	  $(dist_optionsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(optionsdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(optionsdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(optionsdir)" || exit $$?; \
 	done
 
 uninstall-dist_optionsDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(dist_options_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(optionsdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(optionsdir)/$$f"; \
-	done
+	@list='$(dist_options_DATA)'; test -n "$(optionsdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(optionsdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(optionsdir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -635,7 +700,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -669,16 +734,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -693,7 +758,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -705,7 +770,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -714,29 +779,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -757,29 +827,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -814,6 +899,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
@@ -837,6 +923,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -845,18 +933,28 @@ install-data-am: install-data-local install-dist_optionsDATA
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS install-exec-local
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -879,8 +977,9 @@ ps-am:
 
 uninstall-am: uninstall-binPROGRAMS uninstall-dist_optionsDATA
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
+	ctags-recursive install install-am install-strip \
+	tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-binPROGRAMS \
@@ -927,6 +1026,7 @@ relink:
 
 xorg.conf.example.pre: xorgconf.cpp
 	cp $(srcdir)/xorgconf.cpp $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/common/Makefile.in b/xorg-server/hw/xfree86/common/Makefile.in
index a93593a26..f4ec5a585 100644
--- a/xorg-server/hw/xfree86/common/Makefile.in
+++ b/xorg-server/hw/xfree86/common/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,8 +19,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -52,6 +54,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES = xf86Build.h
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libinit_a_AR = $(AR) $(ARFLAGS)
@@ -87,6 +90,7 @@ libcommon_la_OBJECTS = $(am_libcommon_la_OBJECTS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -106,9 +110,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -244,6 +262,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -472,9 +491,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/common/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/common/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/common/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/common/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -492,6 +511,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 xf86Build.h: $(top_builddir)/config.status $(srcdir)/xf86Build.h.in
 	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 
@@ -552,21 +572,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -579,20 +599,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -606,7 +629,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -614,29 +637,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -657,13 +685,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -697,6 +729,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
@@ -720,6 +753,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -728,18 +763,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -762,7 +807,7 @@ ps-am:
 
 uninstall-am: uninstall-sdkHEADERS
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libtool clean-noinstLIBRARIES clean-noinstLTLIBRARIES \
@@ -782,6 +827,7 @@ uninstall-am: uninstall-sdkHEADERS
 xf86DefModeSet.c: $(srcdir)/modeline2c.awk $(MODEDEFSOURCES)
 	cat $(MODEDEFSOURCES) | LC_ALL=C $(AWK) -f $(srcdir)/modeline2c.awk > $@
 	echo >> $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/ddc/Makefile.in b/xorg-server/hw/xfree86/ddc/Makefile.in
index 3e7813965..0e32157ba 100644
--- a/xorg-server/hw/xfree86/ddc/Makefile.in
+++ b/xorg-server/hw/xfree86/ddc/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libddc_a_AR = $(AR) $(ARFLAGS)
@@ -61,6 +64,7 @@ libddc_a_OBJECTS = $(am_libddc_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -74,9 +78,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -212,6 +230,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -379,9 +398,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/ddc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/ddc/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/ddc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/ddc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -399,6 +418,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -421,21 +441,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -448,20 +468,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -475,7 +498,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -483,29 +506,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -526,13 +554,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -563,6 +595,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -584,6 +617,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -592,18 +627,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -642,6 +687,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/dixmods/Makefile.in b/xorg-server/hw/xfree86/dixmods/Makefile.in
index 810da7152..f4fb88edb 100644
--- a/xorg-server/hw/xfree86/dixmods/Makefile.in
+++ b/xorg-server/hw/xfree86/dixmods/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,16 +50,30 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(extsmoduledir)" \
 	"$(DESTDIR)$(moduledir)"
-extsmoduleLTLIBRARIES_INSTALL = $(INSTALL)
-moduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(extsmodule_LTLIBRARIES) $(module_LTLIBRARIES) \
 	$(noinst_LTLIBRARIES)
 libdbe_la_DEPENDENCIES = $(top_builddir)/dbe/libdbe.la
@@ -112,6 +128,7 @@ libxorgxkb_la_OBJECTS = $(am_libxorgxkb_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -135,10 +152,38 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -270,6 +315,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -478,9 +524,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/dixmods/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/dixmods/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/dixmods/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/dixmods/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -498,23 +544,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-extsmoduleLTLIBRARIES: $(extsmodule_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(extsmoduledir)" || $(MKDIR_P) "$(DESTDIR)$(extsmoduledir)"
-	@list='$(extsmodule_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(extsmodule_LTLIBRARIES)'; test -n "$(extsmoduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(extsmoduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(extsmoduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(extsmoduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(extsmoduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(extsmoduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(extsmoduledir)"; \
+	}
 
 uninstall-extsmoduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(extsmodule_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(extsmoduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(extsmoduledir)/$$p"; \
+	@list='$(extsmodule_LTLIBRARIES)'; test -n "$(extsmoduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(extsmoduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(extsmoduledir)/$$f"; \
 	done
 
 clean-extsmoduleLTLIBRARIES:
@@ -528,20 +579,24 @@ clean-extsmoduleLTLIBRARIES:
 install-moduleLTLIBRARIES: $(module_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(moduledir)" || $(MKDIR_P) "$(DESTDIR)$(moduledir)"
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(moduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(moduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(moduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(moduledir)"; \
+	}
 
 uninstall-moduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$p"; \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$f"; \
 	done
 
 clean-moduleLTLIBRARIES:
@@ -599,59 +654,59 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 libdixmods_la-miinitext.lo: $(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdixmods_la_CFLAGS) $(CFLAGS) -MT libdixmods_la-miinitext.lo -MD -MP -MF $(DEPDIR)/libdixmods_la-miinitext.Tpo -c -o libdixmods_la-miinitext.lo `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libdixmods_la-miinitext.Tpo $(DEPDIR)/libdixmods_la-miinitext.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdixmods_la_CFLAGS) $(CFLAGS) -MT libdixmods_la-miinitext.lo -MD -MP -MF $(DEPDIR)/libdixmods_la-miinitext.Tpo -c -o libdixmods_la-miinitext.lo `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libdixmods_la-miinitext.Tpo $(DEPDIR)/libdixmods_la-miinitext.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='libdixmods_la-miinitext.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdixmods_la_CFLAGS) $(CFLAGS) -c -o libdixmods_la-miinitext.lo `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdixmods_la_CFLAGS) $(CFLAGS) -c -o libdixmods_la-miinitext.lo `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
 
 libfb_la-fbcmap_mi.lo: $(top_builddir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbcmap_mi.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbcmap_mi.Tpo -c -o libfb_la-fbcmap_mi.lo `test -f '$(top_builddir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_builddir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbcmap_mi.Tpo $(DEPDIR)/libfb_la-fbcmap_mi.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbcmap_mi.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbcmap_mi.Tpo -c -o libfb_la-fbcmap_mi.lo `test -f '$(top_builddir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_builddir)/fb/fbcmap_mi.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbcmap_mi.Tpo $(DEPDIR)/libfb_la-fbcmap_mi.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_builddir)/fb/fbcmap_mi.c' object='libfb_la-fbcmap_mi.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbcmap_mi.lo `test -f '$(top_builddir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_builddir)/fb/fbcmap_mi.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbcmap_mi.lo `test -f '$(top_builddir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_builddir)/fb/fbcmap_mi.c
 
 libfb_la-fbmodule.lo: fbmodule.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbmodule.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbmodule.Tpo -c -o libfb_la-fbmodule.lo `test -f 'fbmodule.c' || echo '$(srcdir)/'`fbmodule.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfb_la-fbmodule.Tpo $(DEPDIR)/libfb_la-fbmodule.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -MT libfb_la-fbmodule.lo -MD -MP -MF $(DEPDIR)/libfb_la-fbmodule.Tpo -c -o libfb_la-fbmodule.lo `test -f 'fbmodule.c' || echo '$(srcdir)/'`fbmodule.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfb_la-fbmodule.Tpo $(DEPDIR)/libfb_la-fbmodule.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbmodule.c' object='libfb_la-fbmodule.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbmodule.lo `test -f 'fbmodule.c' || echo '$(srcdir)/'`fbmodule.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfb_la_CFLAGS) $(CFLAGS) -c -o libfb_la-fbmodule.lo `test -f 'fbmodule.c' || echo '$(srcdir)/'`fbmodule.c
 
 libwfb_la-fbcmap_mi.lo: $(top_builddir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbcmap_mi.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbcmap_mi.Tpo -c -o libwfb_la-fbcmap_mi.lo `test -f '$(top_builddir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_builddir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbcmap_mi.Tpo $(DEPDIR)/libwfb_la-fbcmap_mi.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbcmap_mi.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbcmap_mi.Tpo -c -o libwfb_la-fbcmap_mi.lo `test -f '$(top_builddir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_builddir)/fb/fbcmap_mi.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbcmap_mi.Tpo $(DEPDIR)/libwfb_la-fbcmap_mi.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_builddir)/fb/fbcmap_mi.c' object='libwfb_la-fbcmap_mi.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbcmap_mi.lo `test -f '$(top_builddir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_builddir)/fb/fbcmap_mi.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbcmap_mi.lo `test -f '$(top_builddir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_builddir)/fb/fbcmap_mi.c
 
 libwfb_la-fbmodule.lo: fbmodule.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbmodule.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbmodule.Tpo -c -o libwfb_la-fbmodule.lo `test -f 'fbmodule.c' || echo '$(srcdir)/'`fbmodule.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libwfb_la-fbmodule.Tpo $(DEPDIR)/libwfb_la-fbmodule.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -MT libwfb_la-fbmodule.lo -MD -MP -MF $(DEPDIR)/libwfb_la-fbmodule.Tpo -c -o libwfb_la-fbmodule.lo `test -f 'fbmodule.c' || echo '$(srcdir)/'`fbmodule.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libwfb_la-fbmodule.Tpo $(DEPDIR)/libwfb_la-fbmodule.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fbmodule.c' object='libwfb_la-fbmodule.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbmodule.lo `test -f 'fbmodule.c' || echo '$(srcdir)/'`fbmodule.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libwfb_la_CFLAGS) $(CFLAGS) -c -o libwfb_la-fbmodule.lo `test -f 'fbmodule.c' || echo '$(srcdir)/'`fbmodule.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -683,7 +738,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -717,16 +772,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -741,7 +796,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -753,7 +808,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -762,29 +817,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -805,29 +865,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -860,6 +935,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -881,6 +957,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -890,18 +968,28 @@ install-data-am: install-extsmoduleLTLIBRARIES \
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -925,8 +1013,8 @@ ps-am:
 uninstall-am: uninstall-extsmoduleLTLIBRARIES \
 	uninstall-moduleLTLIBRARIES
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-extsmoduleLTLIBRARIES \
@@ -946,6 +1034,7 @@ uninstall-am: uninstall-extsmoduleLTLIBRARIES \
 	tags tags-recursive uninstall uninstall-am \
 	uninstall-extsmoduleLTLIBRARIES uninstall-moduleLTLIBRARIES
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/dixmods/extmod/Makefile.in b/xorg-server/hw/xfree86/dixmods/extmod/Makefile.in
index d4ead8762..b50686064 100644
--- a/xorg-server/hw/xfree86/dixmods/extmod/Makefile.in
+++ b/xorg-server/hw/xfree86/dixmods/extmod/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(extsmoduledir)" "$(DESTDIR)$(sdkdir)"
-extsmoduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(extsmodule_LTLIBRARIES)
 libextmod_la_DEPENDENCIES = $(top_builddir)/Xext/libXextmodule.la
 am__libextmod_la_SOURCES_DIST = modinit.c modinit.h xf86dga2.c \
@@ -75,6 +92,7 @@ libextmod_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -83,7 +101,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libextmod_la_SOURCES)
 DIST_SOURCES = $(am__libextmod_la_SOURCES_DIST)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -219,6 +236,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -398,9 +416,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/dixmods/extmod/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/dixmods/extmod/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/dixmods/extmod/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/dixmods/extmod/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -418,23 +436,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-extsmoduleLTLIBRARIES: $(extsmodule_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(extsmoduledir)" || $(MKDIR_P) "$(DESTDIR)$(extsmoduledir)"
-	@list='$(extsmodule_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(extsmodule_LTLIBRARIES)'; test -n "$(extsmoduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(extsmoduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(extsmoduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(extsmoduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(extsmoduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(extsmoduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(extsmoduledir)"; \
+	}
 
 uninstall-extsmoduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(extsmodule_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(extsmoduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(extsmoduledir)/$$p"; \
+	@list='$(extsmodule_LTLIBRARIES)'; test -n "$(extsmoduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(extsmoduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(extsmoduledir)/$$f"; \
 	done
 
 clean-extsmoduleLTLIBRARIES:
@@ -461,21 +484,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -488,20 +511,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -515,7 +541,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -523,29 +549,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -566,13 +597,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -603,6 +638,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -624,6 +660,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -632,18 +670,28 @@ install-data-am: install-extsmoduleLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -684,6 +732,7 @@ uninstall-am: uninstall-extsmoduleLTLIBRARIES uninstall-sdkHEADERS
 	uninstall-am uninstall-extsmoduleLTLIBRARIES \
 	uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/doc/Makefile.in b/xorg-server/hw/xfree86/doc/Makefile.in
index 64e8d0a9e..b6c671248 100644
--- a/xorg-server/hw/xfree86/doc/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,6 +49,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -58,10 +61,38 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = man devel sgml
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -193,6 +224,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -357,9 +389,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/doc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/doc/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/doc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -377,6 +409,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -408,7 +441,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -442,16 +475,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -466,7 +499,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -478,7 +511,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -487,29 +520,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -530,29 +568,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -582,6 +635,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -600,6 +654,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -608,18 +664,28 @@ install-data-am:
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -640,8 +706,8 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -657,6 +723,7 @@ uninstall-am:
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/doc/devel/Makefile.in b/xorg-server/hw/xfree86/doc/devel/Makefile.in
index d5d45e4a9..160ecf4e4 100644
--- a/xorg-server/hw/xfree86/doc/devel/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/devel/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,8 +19,9 @@
 # not installed on the system for end-users
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -184,6 +187,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -349,9 +353,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/doc/devel/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/doc/devel/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/doc/devel/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/doc/devel/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -369,6 +373,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -398,13 +403,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -432,6 +441,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -450,6 +460,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -458,18 +470,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -503,6 +525,7 @@ uninstall-am:
 	maintainer-clean-generic mostlyclean mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/doc/man/Makefile.in b/xorg-server/hw/xfree86/doc/man/Makefile.in
index b48fa6263..56c10fcd4 100644
--- a/xorg-server/hw/xfree86/doc/man/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/man/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -20,8 +21,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -53,6 +55,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -60,10 +63,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(appmandir)" "$(DESTDIR)$(filemandir)"
-appmanDATA_INSTALL = $(INSTALL_DATA)
-filemanDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(appman_DATA) $(fileman_DATA)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
@@ -197,6 +213,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -400,9 +417,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/doc/man/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/doc/man/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/doc/man/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/doc/man/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -420,6 +437,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -429,37 +447,43 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 install-filemanDATA: $(fileman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(filemandir)" || $(MKDIR_P) "$(DESTDIR)$(filemandir)"
-	@list='$(fileman_DATA)'; for p in $$list; do \
+	@list='$(fileman_DATA)'; test -n "$(filemandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(filemanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(filemandir)/$$f'"; \
-	  $(filemanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(filemandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(filemandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(filemandir)" || exit $$?; \
 	done
 
 uninstall-filemanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(fileman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(filemandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(filemandir)/$$f"; \
-	done
+	@list='$(fileman_DATA)'; test -n "$(filemandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(filemandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(filemandir)" && rm -f $$files
 tags: TAGS
 TAGS:
 
@@ -483,13 +507,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -521,6 +549,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -539,6 +568,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -547,18 +578,28 @@ install-data-am: install-appmanDATA install-filemanDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -608,6 +649,7 @@ xorg.conf.$(FILE_MAN_SUFFIX): xorg.conf.man
 
 .man.pre.man:
 	$(RAWCPP) $(RAWCPPFLAGS) $(MANDEFS) $(EXTRAMANDEFS) < $< | $(CPP_SED_MAGIC) > $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/doc/sgml/Makefile.in b/xorg-server/hw/xfree86/doc/sgml/Makefile.in
index c70a3941b..a88958981 100644
--- a/xorg-server/hw/xfree86/doc/sgml/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/sgml/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -37,8 +38,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -69,6 +71,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 DATA = $(noinst_DATA)
@@ -204,6 +207,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -372,9 +376,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/doc/sgml/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/doc/sgml/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/doc/sgml/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/doc/sgml/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -392,6 +396,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -421,13 +426,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -456,6 +465,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -474,6 +484,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -482,18 +494,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -543,6 +565,7 @@ uninstall-am:
 @BUILD_LINUXDOC_TRUE@.sgml.html:
 @BUILD_LINUXDOC_TRUE@	@rm -f $@
 @BUILD_LINUXDOC_TRUE@	$(MAKE_HTML) $<
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/dri/Makefile.in b/xorg-server/hw/xfree86/dri/Makefile.in
index c25627429..cf445fecd 100644
--- a/xorg-server/hw/xfree86/dri/Makefile.in
+++ b/xorg-server/hw/xfree86/dri/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(libdri_ladir)" "$(DESTDIR)$(sdkdir)"
-libdri_laLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(libdri_la_LTLIBRARIES)
 libdri_la_LIBADD =
 am_libdri_la_OBJECTS = libdri_la-dri.lo libdri_la-drimodule.lo \
@@ -69,6 +86,7 @@ libdri_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -77,7 +95,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libdri_la_SOURCES)
 DIST_SOURCES = $(libdri_la_SOURCES)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -213,6 +230,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -400,9 +418,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/dri/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/dri/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/dri/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/dri/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -420,23 +438,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-libdri_laLTLIBRARIES: $(libdri_la_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(libdri_ladir)" || $(MKDIR_P) "$(DESTDIR)$(libdri_ladir)"
-	@list='$(libdri_la_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(libdri_la_LTLIBRARIES)'; test -n "$(libdri_ladir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libdri_laLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdri_ladir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libdri_laLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdri_ladir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdri_ladir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdri_ladir)"; \
+	}
 
 uninstall-libdri_laLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(libdri_la_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdri_ladir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdri_ladir)/$$p"; \
+	@list='$(libdri_la_LTLIBRARIES)'; test -n "$(libdri_ladir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdri_ladir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdri_ladir)/$$f"; \
 	done
 
 clean-libdri_laLTLIBRARIES:
@@ -462,45 +485,45 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 libdri_la-dri.lo: dri.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -MT libdri_la-dri.lo -MD -MP -MF $(DEPDIR)/libdri_la-dri.Tpo -c -o libdri_la-dri.lo `test -f 'dri.c' || echo '$(srcdir)/'`dri.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libdri_la-dri.Tpo $(DEPDIR)/libdri_la-dri.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -MT libdri_la-dri.lo -MD -MP -MF $(DEPDIR)/libdri_la-dri.Tpo -c -o libdri_la-dri.lo `test -f 'dri.c' || echo '$(srcdir)/'`dri.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libdri_la-dri.Tpo $(DEPDIR)/libdri_la-dri.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dri.c' object='libdri_la-dri.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -c -o libdri_la-dri.lo `test -f 'dri.c' || echo '$(srcdir)/'`dri.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -c -o libdri_la-dri.lo `test -f 'dri.c' || echo '$(srcdir)/'`dri.c
 
 libdri_la-drimodule.lo: drimodule.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -MT libdri_la-drimodule.lo -MD -MP -MF $(DEPDIR)/libdri_la-drimodule.Tpo -c -o libdri_la-drimodule.lo `test -f 'drimodule.c' || echo '$(srcdir)/'`drimodule.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libdri_la-drimodule.Tpo $(DEPDIR)/libdri_la-drimodule.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -MT libdri_la-drimodule.lo -MD -MP -MF $(DEPDIR)/libdri_la-drimodule.Tpo -c -o libdri_la-drimodule.lo `test -f 'drimodule.c' || echo '$(srcdir)/'`drimodule.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libdri_la-drimodule.Tpo $(DEPDIR)/libdri_la-drimodule.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='drimodule.c' object='libdri_la-drimodule.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -c -o libdri_la-drimodule.lo `test -f 'drimodule.c' || echo '$(srcdir)/'`drimodule.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -c -o libdri_la-drimodule.lo `test -f 'drimodule.c' || echo '$(srcdir)/'`drimodule.c
 
 libdri_la-xf86dri.lo: xf86dri.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -MT libdri_la-xf86dri.lo -MD -MP -MF $(DEPDIR)/libdri_la-xf86dri.Tpo -c -o libdri_la-xf86dri.lo `test -f 'xf86dri.c' || echo '$(srcdir)/'`xf86dri.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libdri_la-xf86dri.Tpo $(DEPDIR)/libdri_la-xf86dri.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -MT libdri_la-xf86dri.lo -MD -MP -MF $(DEPDIR)/libdri_la-xf86dri.Tpo -c -o libdri_la-xf86dri.lo `test -f 'xf86dri.c' || echo '$(srcdir)/'`xf86dri.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libdri_la-xf86dri.Tpo $(DEPDIR)/libdri_la-xf86dri.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='xf86dri.c' object='libdri_la-xf86dri.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -c -o libdri_la-xf86dri.lo `test -f 'xf86dri.c' || echo '$(srcdir)/'`xf86dri.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri_la_CFLAGS) $(CFLAGS) -c -o libdri_la-xf86dri.lo `test -f 'xf86dri.c' || echo '$(srcdir)/'`xf86dri.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -510,20 +533,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -537,7 +563,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -545,29 +571,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -588,13 +619,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -625,6 +660,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -646,6 +682,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -654,18 +692,28 @@ install-data-am: install-libdri_laLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -705,6 +753,7 @@ uninstall-am: uninstall-libdri_laLTLIBRARIES uninstall-sdkHEADERS
 	pdf pdf-am ps ps-am tags uninstall uninstall-am \
 	uninstall-libdri_laLTLIBRARIES uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/dri2/Makefile.in b/xorg-server/hw/xfree86/dri2/Makefile.in
index 74cc5d42f..25e0ff702 100644
--- a/xorg-server/hw/xfree86/dri2/Makefile.in
+++ b/xorg-server/hw/xfree86/dri2/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(libdri2_ladir)" "$(DESTDIR)$(sdkdir)"
-libdri2_laLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(libdri2_la_LTLIBRARIES)
 libdri2_la_LIBADD =
 am_libdri2_la_OBJECTS = libdri2_la-dri2.lo libdri2_la-dri2ext.lo
@@ -68,6 +85,7 @@ libdri2_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -76,7 +94,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libdri2_la_SOURCES)
 DIST_SOURCES = $(libdri2_la_SOURCES)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -212,6 +229,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -387,9 +405,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/dri2/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/dri2/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/dri2/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/dri2/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -407,23 +425,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-libdri2_laLTLIBRARIES: $(libdri2_la_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(libdri2_ladir)" || $(MKDIR_P) "$(DESTDIR)$(libdri2_ladir)"
-	@list='$(libdri2_la_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(libdri2_la_LTLIBRARIES)'; test -n "$(libdri2_ladir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libdri2_laLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdri2_ladir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libdri2_laLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdri2_ladir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdri2_ladir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdri2_ladir)"; \
+	}
 
 uninstall-libdri2_laLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(libdri2_la_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdri2_ladir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdri2_ladir)/$$p"; \
+	@list='$(libdri2_la_LTLIBRARIES)'; test -n "$(libdri2_ladir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdri2_ladir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdri2_ladir)/$$f"; \
 	done
 
 clean-libdri2_laLTLIBRARIES:
@@ -448,38 +471,38 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 libdri2_la-dri2.lo: dri2.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri2_la_CFLAGS) $(CFLAGS) -MT libdri2_la-dri2.lo -MD -MP -MF $(DEPDIR)/libdri2_la-dri2.Tpo -c -o libdri2_la-dri2.lo `test -f 'dri2.c' || echo '$(srcdir)/'`dri2.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libdri2_la-dri2.Tpo $(DEPDIR)/libdri2_la-dri2.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri2_la_CFLAGS) $(CFLAGS) -MT libdri2_la-dri2.lo -MD -MP -MF $(DEPDIR)/libdri2_la-dri2.Tpo -c -o libdri2_la-dri2.lo `test -f 'dri2.c' || echo '$(srcdir)/'`dri2.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libdri2_la-dri2.Tpo $(DEPDIR)/libdri2_la-dri2.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dri2.c' object='libdri2_la-dri2.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri2_la_CFLAGS) $(CFLAGS) -c -o libdri2_la-dri2.lo `test -f 'dri2.c' || echo '$(srcdir)/'`dri2.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri2_la_CFLAGS) $(CFLAGS) -c -o libdri2_la-dri2.lo `test -f 'dri2.c' || echo '$(srcdir)/'`dri2.c
 
 libdri2_la-dri2ext.lo: dri2ext.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri2_la_CFLAGS) $(CFLAGS) -MT libdri2_la-dri2ext.lo -MD -MP -MF $(DEPDIR)/libdri2_la-dri2ext.Tpo -c -o libdri2_la-dri2ext.lo `test -f 'dri2ext.c' || echo '$(srcdir)/'`dri2ext.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libdri2_la-dri2ext.Tpo $(DEPDIR)/libdri2_la-dri2ext.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri2_la_CFLAGS) $(CFLAGS) -MT libdri2_la-dri2ext.lo -MD -MP -MF $(DEPDIR)/libdri2_la-dri2ext.Tpo -c -o libdri2_la-dri2ext.lo `test -f 'dri2ext.c' || echo '$(srcdir)/'`dri2ext.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libdri2_la-dri2ext.Tpo $(DEPDIR)/libdri2_la-dri2ext.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='dri2ext.c' object='libdri2_la-dri2ext.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri2_la_CFLAGS) $(CFLAGS) -c -o libdri2_la-dri2ext.lo `test -f 'dri2ext.c' || echo '$(srcdir)/'`dri2ext.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdri2_la_CFLAGS) $(CFLAGS) -c -o libdri2_la-dri2ext.lo `test -f 'dri2ext.c' || echo '$(srcdir)/'`dri2ext.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -489,20 +512,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -516,7 +542,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -524,29 +550,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -567,13 +598,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -604,6 +639,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -625,6 +661,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -633,18 +671,28 @@ install-data-am: install-libdri2_laLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -684,6 +732,7 @@ uninstall-am: uninstall-libdri2_laLTLIBRARIES uninstall-sdkHEADERS
 	pdf pdf-am ps ps-am tags uninstall uninstall-am \
 	uninstall-libdri2_laLTLIBRARIES uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/dummylib/Makefile.in b/xorg-server/hw/xfree86/dummylib/Makefile.in
index f71e34427..e0b3d91a5 100644
--- a/xorg-server/hw/xfree86/dummylib/Makefile.in
+++ b/xorg-server/hw/xfree86/dummylib/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -20,8 +21,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -52,6 +54,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libdummy_nonserver_a_AR = $(AR) $(ARFLAGS)
@@ -79,6 +82,7 @@ libdummy_nonserver_a_OBJECTS = $(am_libdummy_nonserver_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -221,6 +225,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -408,9 +413,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/dummylib/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/dummylib/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/dummylib/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/dummylib/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -428,6 +433,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -467,63 +473,63 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 strlcat.o: $(top_srcdir)/os/strlcat.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT strlcat.o -MD -MP -MF $(DEPDIR)/strlcat.Tpo -c -o strlcat.o `test -f '$(top_srcdir)/os/strlcat.c' || echo '$(srcdir)/'`$(top_srcdir)/os/strlcat.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/strlcat.Tpo $(DEPDIR)/strlcat.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/strlcat.Tpo $(DEPDIR)/strlcat.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/os/strlcat.c' object='strlcat.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o strlcat.o `test -f '$(top_srcdir)/os/strlcat.c' || echo '$(srcdir)/'`$(top_srcdir)/os/strlcat.c
 
 strlcat.obj: $(top_srcdir)/os/strlcat.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT strlcat.obj -MD -MP -MF $(DEPDIR)/strlcat.Tpo -c -o strlcat.obj `if test -f '$(top_srcdir)/os/strlcat.c'; then $(CYGPATH_W) '$(top_srcdir)/os/strlcat.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/os/strlcat.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/strlcat.Tpo $(DEPDIR)/strlcat.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/strlcat.Tpo $(DEPDIR)/strlcat.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/os/strlcat.c' object='strlcat.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o strlcat.obj `if test -f '$(top_srcdir)/os/strlcat.c'; then $(CYGPATH_W) '$(top_srcdir)/os/strlcat.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/os/strlcat.c'; fi`
 
 strlcpy.o: $(top_srcdir)/os/strlcpy.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT strlcpy.o -MD -MP -MF $(DEPDIR)/strlcpy.Tpo -c -o strlcpy.o `test -f '$(top_srcdir)/os/strlcpy.c' || echo '$(srcdir)/'`$(top_srcdir)/os/strlcpy.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/strlcpy.Tpo $(DEPDIR)/strlcpy.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/strlcpy.Tpo $(DEPDIR)/strlcpy.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/os/strlcpy.c' object='strlcpy.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o strlcpy.o `test -f '$(top_srcdir)/os/strlcpy.c' || echo '$(srcdir)/'`$(top_srcdir)/os/strlcpy.c
 
 strlcpy.obj: $(top_srcdir)/os/strlcpy.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT strlcpy.obj -MD -MP -MF $(DEPDIR)/strlcpy.Tpo -c -o strlcpy.obj `if test -f '$(top_srcdir)/os/strlcpy.c'; then $(CYGPATH_W) '$(top_srcdir)/os/strlcpy.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/os/strlcpy.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/strlcpy.Tpo $(DEPDIR)/strlcpy.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/strlcpy.Tpo $(DEPDIR)/strlcpy.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/os/strlcpy.c' object='strlcpy.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o strlcpy.obj `if test -f '$(top_srcdir)/os/strlcpy.c'; then $(CYGPATH_W) '$(top_srcdir)/os/strlcpy.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/os/strlcpy.c'; fi`
 
 sigiostubs.o: $(srcdir)/../os-support/shared/sigiostubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigiostubs.o -MD -MP -MF $(DEPDIR)/sigiostubs.Tpo -c -o sigiostubs.o `test -f '$(srcdir)/../os-support/shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/shared/sigiostubs.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/sigiostubs.Tpo $(DEPDIR)/sigiostubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/sigiostubs.Tpo $(DEPDIR)/sigiostubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../os-support/shared/sigiostubs.c' object='sigiostubs.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigiostubs.o `test -f '$(srcdir)/../os-support/shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/shared/sigiostubs.c
 
 sigiostubs.obj: $(srcdir)/../os-support/shared/sigiostubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigiostubs.obj -MD -MP -MF $(DEPDIR)/sigiostubs.Tpo -c -o sigiostubs.obj `if test -f '$(srcdir)/../os-support/shared/sigiostubs.c'; then $(CYGPATH_W) '$(srcdir)/../os-support/shared/sigiostubs.c'; else $(CYGPATH_W) '$(srcdir)/$(srcdir)/../os-support/shared/sigiostubs.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/sigiostubs.Tpo $(DEPDIR)/sigiostubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/sigiostubs.Tpo $(DEPDIR)/sigiostubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../os-support/shared/sigiostubs.c' object='sigiostubs.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigiostubs.obj `if test -f '$(srcdir)/../os-support/shared/sigiostubs.c'; then $(CYGPATH_W) '$(srcdir)/../os-support/shared/sigiostubs.c'; else $(CYGPATH_W) '$(srcdir)/$(srcdir)/../os-support/shared/sigiostubs.c'; fi`
@@ -546,7 +552,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -554,29 +560,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -597,13 +608,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -631,6 +646,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -652,6 +668,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -660,18 +678,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -709,6 +737,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/exa/Makefile.in b/xorg-server/hw/xfree86/exa/Makefile.in
index 69c409f54..8861fed08 100644
--- a/xorg-server/hw/xfree86/exa/Makefile.in
+++ b/xorg-server/hw/xfree86/exa/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -21,8 +22,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -54,14 +56,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(moduledir)" "$(DESTDIR)$(drivermandir)"
-moduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(module_LTLIBRARIES)
 libexa_la_DEPENDENCIES = ../../../exa/libexa.la
 am_libexa_la_OBJECTS = examodule.lo
@@ -72,6 +89,7 @@ libexa_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -80,7 +98,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libexa_la_SOURCES)
 DIST_SOURCES = $(libexa_la_SOURCES)
-drivermanDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(driverman_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -216,6 +233,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -427,9 +445,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/exa/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/exa/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/exa/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/exa/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -447,23 +465,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-moduleLTLIBRARIES: $(module_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(moduledir)" || $(MKDIR_P) "$(DESTDIR)$(moduledir)"
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(moduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(moduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(moduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(moduledir)"; \
+	}
 
 uninstall-moduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$p"; \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$f"; \
 	done
 
 clean-moduleLTLIBRARIES:
@@ -487,21 +510,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -514,20 +537,23 @@ clean-libtool:
 install-drivermanDATA: $(driverman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(drivermandir)" || $(MKDIR_P) "$(DESTDIR)$(drivermandir)"
-	@list='$(driverman_DATA)'; for p in $$list; do \
+	@list='$(driverman_DATA)'; test -n "$(drivermandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(drivermanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(drivermandir)/$$f'"; \
-	  $(drivermanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(drivermandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(drivermandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(drivermandir)" || exit $$?; \
 	done
 
 uninstall-drivermanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(driverman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(drivermandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(drivermandir)/$$f"; \
-	done
+	@list='$(driverman_DATA)'; test -n "$(drivermandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(drivermandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(drivermandir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -541,7 +567,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -549,29 +575,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -592,13 +623,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -630,6 +665,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -651,6 +687,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -659,18 +697,28 @@ install-data-am: install-drivermanDATA install-moduleLTLIBRARIES
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -720,6 +768,7 @@ uninstall-am: uninstall-drivermanDATA uninstall-moduleLTLIBRARIES
 exa.$(DRIVER_MAN_SUFFIX): exa.man
 	-rm -f exa.$(DRIVER_MAN_SUFFIX)
 	$(LN_S) exa.man exa.$(DRIVER_MAN_SUFFIX)
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/fbdevhw/Makefile.in b/xorg-server/hw/xfree86/fbdevhw/Makefile.in
index 694956505..e4676b679 100644
--- a/xorg-server/hw/xfree86/fbdevhw/Makefile.in
+++ b/xorg-server/hw/xfree86/fbdevhw/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -22,8 +23,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -55,15 +57,30 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(linuxmoduledir)" \
 	"$(DESTDIR)$(drivermandir)" "$(DESTDIR)$(sdkdir)"
-linuxmoduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(linuxmodule_LTLIBRARIES)
 libfbdevhw_la_LIBADD =
 am__libfbdevhw_la_SOURCES_DIST = fbdevhwstub.c fbdevhw.c
@@ -76,6 +93,7 @@ libfbdevhw_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -84,9 +102,7 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libfbdevhw_la_SOURCES)
 DIST_SOURCES = $(am__libfbdevhw_la_SOURCES_DIST)
-drivermanDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(driverman_DATA)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -222,6 +238,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -427,9 +444,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/fbdevhw/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/fbdevhw/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/fbdevhw/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/fbdevhw/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -447,23 +464,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-linuxmoduleLTLIBRARIES: $(linuxmodule_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(linuxmoduledir)" || $(MKDIR_P) "$(DESTDIR)$(linuxmoduledir)"
-	@list='$(linuxmodule_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(linuxmodule_LTLIBRARIES)'; test -n "$(linuxmoduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(linuxmoduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(linuxmoduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(linuxmoduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(linuxmoduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(linuxmoduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(linuxmoduledir)"; \
+	}
 
 uninstall-linuxmoduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(linuxmodule_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(linuxmoduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(linuxmoduledir)/$$p"; \
+	@list='$(linuxmodule_LTLIBRARIES)'; test -n "$(linuxmoduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(linuxmoduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(linuxmoduledir)/$$f"; \
 	done
 
 clean-linuxmoduleLTLIBRARIES:
@@ -488,21 +510,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -515,37 +537,43 @@ clean-libtool:
 install-drivermanDATA: $(driverman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(drivermandir)" || $(MKDIR_P) "$(DESTDIR)$(drivermandir)"
-	@list='$(driverman_DATA)'; for p in $$list; do \
+	@list='$(driverman_DATA)'; test -n "$(drivermandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(drivermanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(drivermandir)/$$f'"; \
-	  $(drivermanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(drivermandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(drivermandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(drivermandir)" || exit $$?; \
 	done
 
 uninstall-drivermanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(driverman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(drivermandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(drivermandir)/$$f"; \
-	done
+	@list='$(driverman_DATA)'; test -n "$(drivermandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(drivermandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(drivermandir)" && rm -f $$files
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -559,7 +587,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -567,29 +595,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -610,13 +643,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -648,6 +685,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -669,6 +707,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -678,18 +718,28 @@ install-data-am: install-drivermanDATA install-linuxmoduleLTLIBRARIES \
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -741,6 +791,7 @@ uninstall-am: uninstall-drivermanDATA uninstall-linuxmoduleLTLIBRARIES \
 fbdevhw.$(DRIVER_MAN_SUFFIX): fbdevhw.man
 	-rm -f fbdevhw.$(DRIVER_MAN_SUFFIX)
 	$(LN_S) fbdevhw.man fbdevhw.$(DRIVER_MAN_SUFFIX)
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/i2c/Makefile.in b/xorg-server/hw/xfree86/i2c/Makefile.in
index d5cc978ba..5cb63d658 100644
--- a/xorg-server/hw/xfree86/i2c/Makefile.in
+++ b/xorg-server/hw/xfree86/i2c/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,8 +19,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -51,6 +53,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libi2c_a_AR = $(AR) $(ARFLAGS)
@@ -62,9 +65,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(multimediadir)" "$(DESTDIR)$(sdkdir)"
-multimediaLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(multimedia_LTLIBRARIES)
 bt829_drv_la_LIBADD =
 am_bt829_drv_la_OBJECTS = bt829.lo bt829_module.lo
@@ -111,6 +128,7 @@ uda1380_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -125,7 +143,6 @@ DIST_SOURCES = $(libi2c_a_SOURCES) $(bt829_drv_la_SOURCES) \
 	$(fi1236_drv_la_SOURCES) $(msp3430_drv_la_SOURCES) \
 	$(tda8425_drv_la_SOURCES) $(tda9850_drv_la_SOURCES) \
 	$(tda9885_drv_la_SOURCES) $(uda1380_drv_la_SOURCES)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -261,6 +278,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -453,9 +471,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/i2c/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/i2c/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/i2c/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/i2c/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -473,6 +491,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -483,20 +502,24 @@ libi2c.a: $(libi2c_a_OBJECTS) $(libi2c_a_DEPENDENCIES)
 install-multimediaLTLIBRARIES: $(multimedia_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(multimediadir)" || $(MKDIR_P) "$(DESTDIR)$(multimediadir)"
-	@list='$(multimedia_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(multimedia_LTLIBRARIES)'; test -n "$(multimediadir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(multimediaLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(multimediadir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(multimediaLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(multimediadir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(multimediadir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(multimediadir)"; \
+	}
 
 uninstall-multimediaLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(multimedia_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(multimediadir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(multimediadir)/$$p"; \
+	@list='$(multimedia_LTLIBRARIES)'; test -n "$(multimediadir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(multimediadir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(multimediadir)/$$f"; \
 	done
 
 clean-multimediaLTLIBRARIES:
@@ -546,21 +569,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -573,20 +596,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -600,7 +626,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -608,29 +634,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -651,13 +682,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -688,6 +723,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -709,6 +745,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -717,18 +755,28 @@ install-data-am: install-multimediaLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -769,6 +817,7 @@ uninstall-am: uninstall-multimediaLTLIBRARIES uninstall-sdkHEADERS
 	tags uninstall uninstall-am uninstall-multimediaLTLIBRARIES \
 	uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/int10/Makefile.in b/xorg-server/hw/xfree86/int10/Makefile.in
index e434023dc..1afc07a81 100644
--- a/xorg-server/hw/xfree86/int10/Makefile.in
+++ b/xorg-server/hw/xfree86/int10/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(moduledir)" "$(DESTDIR)$(sdkdir)"
-moduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(module_LTLIBRARIES)
 libint10_la_LIBADD =
 am__libint10_la_SOURCES_DIST = stub.c xf86int10module.c helper_exec.c \
@@ -82,6 +99,7 @@ libint10_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -90,7 +108,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libint10_la_SOURCES)
 DIST_SOURCES = $(am__libint10_la_SOURCES_DIST)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -226,6 +243,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -416,9 +434,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/int10/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/int10/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/int10/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/int10/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -436,23 +454,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-moduleLTLIBRARIES: $(module_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(moduledir)" || $(MKDIR_P) "$(DESTDIR)$(moduledir)"
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(moduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(moduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(moduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(moduledir)"; \
+	}
 
 uninstall-moduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$p"; \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$f"; \
 	done
 
 clean-moduleLTLIBRARIES:
@@ -485,38 +508,38 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 linux_vm86.lo: $(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT linux_vm86.lo -MD -MP -MF $(DEPDIR)/linux_vm86.Tpo -c -o linux_vm86.lo `test -f '$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/linux_vm86.Tpo $(DEPDIR)/linux_vm86.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT linux_vm86.lo -MD -MP -MF $(DEPDIR)/linux_vm86.Tpo -c -o linux_vm86.lo `test -f '$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/linux_vm86.Tpo $(DEPDIR)/linux_vm86.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c' object='linux_vm86.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o linux_vm86.lo `test -f '$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o linux_vm86.lo `test -f '$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c
 
 linux.lo: $(srcdir)/../os-support/linux/int10/linux.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT linux.lo -MD -MP -MF $(DEPDIR)/linux.Tpo -c -o linux.lo `test -f '$(srcdir)/../os-support/linux/int10/linux.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/linux/int10/linux.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/linux.Tpo $(DEPDIR)/linux.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT linux.lo -MD -MP -MF $(DEPDIR)/linux.Tpo -c -o linux.lo `test -f '$(srcdir)/../os-support/linux/int10/linux.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/linux/int10/linux.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/linux.Tpo $(DEPDIR)/linux.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../os-support/linux/int10/linux.c' object='linux.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o linux.lo `test -f '$(srcdir)/../os-support/linux/int10/linux.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/linux/int10/linux.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o linux.lo `test -f '$(srcdir)/../os-support/linux/int10/linux.c' || echo '$(srcdir)/'`$(srcdir)/../os-support/linux/int10/linux.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -526,20 +549,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -553,7 +579,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -561,29 +587,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -604,13 +635,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -641,6 +676,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -662,6 +698,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -670,18 +708,28 @@ install-data-am: install-moduleLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -721,6 +769,7 @@ uninstall-am: uninstall-moduleLTLIBRARIES uninstall-sdkHEADERS
 	tags uninstall uninstall-am uninstall-moduleLTLIBRARIES \
 	uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/loader/Makefile.in b/xorg-server/hw/xfree86/loader/Makefile.in
index cc12b39f8..a004254a6 100644
--- a/xorg-server/hw/xfree86/loader/Makefile.in
+++ b/xorg-server/hw/xfree86/loader/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libloader_a_AR = $(AR) $(ARFLAGS)
@@ -60,6 +63,7 @@ libloader_a_OBJECTS = $(am_libloader_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -202,6 +206,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -388,9 +393,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/loader/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/loader/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/loader/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/loader/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -408,6 +413,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -434,21 +440,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -471,7 +477,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -479,29 +485,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -522,13 +533,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -556,6 +571,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -577,6 +593,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -585,18 +603,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -634,6 +662,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/modes/Makefile.in b/xorg-server/hw/xfree86/modes/Makefile.in
index 0af44e357..89ed8cadb 100644
--- a/xorg-server/hw/xfree86/modes/Makefile.in
+++ b/xorg-server/hw/xfree86/modes/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libxf86modes_a_AR = $(AR) $(ARFLAGS)
@@ -62,6 +65,7 @@ libxf86modes_a_OBJECTS = $(am_libxf86modes_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -75,9 +79,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -213,6 +231,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -401,9 +420,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/modes/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/modes/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/modes/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/modes/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -421,6 +440,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -447,21 +467,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -474,20 +494,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -501,7 +524,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -509,29 +532,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -552,13 +580,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -589,6 +621,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -610,6 +643,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -618,18 +653,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -668,6 +713,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/modes/xf86Crtc.c b/xorg-server/hw/xfree86/modes/xf86Crtc.c
index 84d3cac3e..e9bde36e3 100644
--- a/xorg-server/hw/xfree86/modes/xf86Crtc.c
+++ b/xorg-server/hw/xfree86/modes/xf86Crtc.c
@@ -255,9 +255,6 @@ xf86CrtcSetModeTransform (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotati
     RRTransformRec	saved_transform;
     Bool		saved_transform_present;
 
-    if (crtc->funcs->set_mode_major)
-	return crtc->funcs->set_mode_major(crtc, mode, rotation, x, y);
-
     crtc->enabled = xf86CrtcInUse (crtc);
 
     if (!crtc->enabled)
@@ -268,7 +265,6 @@ xf86CrtcSetModeTransform (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotati
 
     adjusted_mode = xf86DuplicateMode(mode);
 
-    didLock = crtc->funcs->lock (crtc);
 
     saved_mode = crtc->mode;
     saved_x = crtc->x;
@@ -293,19 +289,12 @@ xf86CrtcSetModeTransform (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotati
     } else
 	crtc->transformPresent = FALSE;
 
-    if (crtc->funcs->set_origin &&
-	memcmp (mode, &saved_mode, sizeof(saved_mode)) == 0 &&
-	saved_rotation == rotation &&
-	saved_transform_present == crtc->transformPresent &&
-	(!crtc->transformPresent || RRTransformEqual(&saved_transform, &crtc->transform)))
-    {
-	if (!xf86CrtcRotate (crtc))
-		goto done;
-	crtc->funcs->set_origin (crtc, crtc->x, crtc->y);
-	ret = TRUE;
+    if (crtc->funcs->set_mode_major) {
+	ret = crtc->funcs->set_mode_major(crtc, mode, rotation, x, y);
 	goto done;
     }
 
+    didLock = crtc->funcs->lock (crtc);
     /* Pass our mode to the outputs and the CRTC to give them a chance to
      * adjust it according to limitations or output properties, and also
      * a chance to reject the mode entirely.
diff --git a/xorg-server/hw/xfree86/modes/xf86Cursors.c b/xorg-server/hw/xfree86/modes/xf86Cursors.c
index 3106f051b..fbd61e9fd 100644
--- a/xorg-server/hw/xfree86/modes/xf86Cursors.c
+++ b/xorg-server/hw/xfree86/modes/xf86Cursors.c
@@ -640,9 +640,11 @@ xf86_reload_cursors (ScreenPtr screen)
 	    (*cursor_info->LoadCursorARGB) (scrn, cursor);
 	else if (src)
 #endif
-	    (*cursor_info->LoadCursorImage)(cursor_info->pScrn, src);
+	    (*cursor_info->LoadCursorImage)(scrn, src);
 
-	(*cursor_info->SetCursorPosition)(cursor_info->pScrn, x, y);
+	x += scrn->frameX0 + cursor_screen_priv->HotX;
+	y += scrn->frameY0 + cursor_screen_priv->HotY;
+	(*cursor_info->SetCursorPosition)(scrn, x, y);
     }
 }
 
diff --git a/xorg-server/hw/xfree86/modes/xf86EdidModes.c b/xorg-server/hw/xfree86/modes/xf86EdidModes.c
index 087f66376..6256fda0e 100644
--- a/xorg-server/hw/xfree86/modes/xf86EdidModes.c
+++ b/xorg-server/hw/xfree86/modes/xf86EdidModes.c
@@ -205,6 +205,11 @@ static Bool quirk_first_detailed_preferred (int scrnIndex, xf86MonPtr DDC)
 	DDC->vendor.prod_id == 2423)
 	return TRUE;
 
+    /* Peacock Ergovision 19.  See rh#492359 */
+    if (memcmp (DDC->vendor.name, "PEA", 4) == 0 &&
+	DDC->vendor.prod_id == 9003)
+	return TRUE;
+
     return FALSE;
 }
 
diff --git a/xorg-server/hw/xfree86/modes/xf86Rotate.c b/xorg-server/hw/xfree86/modes/xf86Rotate.c
index 6be77d556..bb17df431 100644
--- a/xorg-server/hw/xfree86/modes/xf86Rotate.c
+++ b/xorg-server/hw/xfree86/modes/xf86Rotate.c
@@ -198,6 +198,7 @@ xf86RotatePrepare (ScreenPtr pScreen)
 		DamageRegister (&(*pScreen->GetScreenPixmap)(pScreen)->drawable,
 				xf86_config->rotation_damage);
 		xf86_config->rotation_damage_registered = TRUE;
+		EnableLimitedSchedulingLatency();
 	    }
 	    
 	    xf86CrtcDamageShadow (crtc);
@@ -263,11 +264,12 @@ xf86RotateBlockHandler(int screenNum, pointer blockData,
     ScreenPtr		pScreen = screenInfo.screens[screenNum];
     ScrnInfoPtr		pScrn = xf86Screens[screenNum];
     xf86CrtcConfigPtr   xf86_config = XF86_CRTC_CONFIG_PTR(pScrn);
+    Bool		rotation_active;
 
+    rotation_active = xf86RotateRedisplay(pScreen);
     pScreen->BlockHandler = xf86_config->BlockHandler;
     (*pScreen->BlockHandler) (screenNum, blockData, pTimeout, pReadmask);
-    if (xf86RotateRedisplay(pScreen))
-    {
+    if (rotation_active) {
 	/* Re-wrap if rotation is still happening */
 	xf86_config->BlockHandler = pScreen->BlockHandler;
 	pScreen->BlockHandler = xf86RotateBlockHandler;
@@ -307,6 +309,7 @@ xf86RotateDestroy (xf86CrtcPtr crtc)
 	    DamageUnregister (&(*pScreen->GetScreenPixmap)(pScreen)->drawable,
 			      xf86_config->rotation_damage);
 	    xf86_config->rotation_damage_registered = FALSE;
+	    DisableLimitedSchedulingLatency();
 	}
 	DamageDestroy (xf86_config->rotation_damage);
 	xf86_config->rotation_damage = NULL;
diff --git a/xorg-server/hw/xfree86/os-support/Makefile.in b/xorg-server/hw/xfree86/os-support/Makefile.in
index 18e2ffde3..c4873c87f 100644
--- a/xorg-server/hw/xfree86/os-support/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libxorgos_la_DEPENDENCIES = @XORG_OS_SUBDIR@/lib@XORG_OS_SUBDIR@.la \
 	bus/libbus.la misc/libmisc.la
@@ -58,6 +61,7 @@ libxorgos_la_OBJECTS = $(am_libxorgos_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -78,15 +82,57 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -218,6 +264,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -395,9 +442,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -415,6 +462,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -437,21 +485,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -464,20 +512,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -503,7 +554,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -537,16 +588,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -561,7 +612,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -573,7 +624,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -582,29 +633,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -625,29 +681,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -680,6 +751,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
@@ -702,6 +774,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -710,18 +784,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -744,8 +828,8 @@ ps-am:
 
 uninstall-am: uninstall-sdkHEADERS
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -766,6 +850,7 @@ uninstall-am: uninstall-sdkHEADERS
 
 xorgos.c:
 	touch $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/bsd/Makefile.in b/xorg-server/hw/xfree86/os-support/bsd/Makefile.in
index fa86db8ae..4f5a15a06 100644
--- a/xorg-server/hw/xfree86/os-support/bsd/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/bsd/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libbsd_la_LIBADD =
 am__libbsd_la_SOURCES_DIST = $(srcdir)/../shared/posix_tty.c \
@@ -82,6 +85,7 @@ libbsd_la_OBJECTS = $(am_libbsd_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -224,6 +228,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -437,9 +442,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/bsd/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/bsd/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/bsd/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/bsd/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -457,6 +462,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -501,108 +507,108 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 posix_tty.lo: $(srcdir)/../shared/posix_tty.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT posix_tty.lo -MD -MP -MF $(DEPDIR)/posix_tty.Tpo -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/posix_tty.Tpo $(DEPDIR)/posix_tty.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT posix_tty.lo -MD -MP -MF $(DEPDIR)/posix_tty.Tpo -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/posix_tty.Tpo $(DEPDIR)/posix_tty.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/posix_tty.c' object='posix_tty.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
 
 sigio.lo: $(srcdir)/../shared/sigio.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigio.lo -MD -MP -MF $(DEPDIR)/sigio.Tpo -c -o sigio.lo `test -f '$(srcdir)/../shared/sigio.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigio.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/sigio.Tpo $(DEPDIR)/sigio.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigio.lo -MD -MP -MF $(DEPDIR)/sigio.Tpo -c -o sigio.lo `test -f '$(srcdir)/../shared/sigio.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigio.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/sigio.Tpo $(DEPDIR)/sigio.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/sigio.c' object='sigio.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigio.lo `test -f '$(srcdir)/../shared/sigio.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigio.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigio.lo `test -f '$(srcdir)/../shared/sigio.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigio.c
 
 vidmem.lo: $(srcdir)/../shared/vidmem.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT vidmem.lo -MD -MP -MF $(DEPDIR)/vidmem.Tpo -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/vidmem.Tpo $(DEPDIR)/vidmem.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT vidmem.lo -MD -MP -MF $(DEPDIR)/vidmem.Tpo -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/vidmem.Tpo $(DEPDIR)/vidmem.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/vidmem.c' object='vidmem.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
 
 xf86Axp.lo: $(srcdir)/../shared/xf86Axp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xf86Axp.lo -MD -MP -MF $(DEPDIR)/xf86Axp.Tpo -c -o xf86Axp.lo `test -f '$(srcdir)/../shared/xf86Axp.c' || echo '$(srcdir)/'`$(srcdir)/../shared/xf86Axp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xf86Axp.Tpo $(DEPDIR)/xf86Axp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xf86Axp.lo -MD -MP -MF $(DEPDIR)/xf86Axp.Tpo -c -o xf86Axp.lo `test -f '$(srcdir)/../shared/xf86Axp.c' || echo '$(srcdir)/'`$(srcdir)/../shared/xf86Axp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xf86Axp.Tpo $(DEPDIR)/xf86Axp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/xf86Axp.c' object='xf86Axp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xf86Axp.lo `test -f '$(srcdir)/../shared/xf86Axp.c' || echo '$(srcdir)/'`$(srcdir)/../shared/xf86Axp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xf86Axp.lo `test -f '$(srcdir)/../shared/xf86Axp.c' || echo '$(srcdir)/'`$(srcdir)/../shared/xf86Axp.c
 
 ioperm_noop.lo: $(srcdir)/../shared/ioperm_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ioperm_noop.lo -MD -MP -MF $(DEPDIR)/ioperm_noop.Tpo -c -o ioperm_noop.lo `test -f '$(srcdir)/../shared/ioperm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/ioperm_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/ioperm_noop.Tpo $(DEPDIR)/ioperm_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ioperm_noop.lo -MD -MP -MF $(DEPDIR)/ioperm_noop.Tpo -c -o ioperm_noop.lo `test -f '$(srcdir)/../shared/ioperm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/ioperm_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/ioperm_noop.Tpo $(DEPDIR)/ioperm_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/ioperm_noop.c' object='ioperm_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ioperm_noop.lo `test -f '$(srcdir)/../shared/ioperm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/ioperm_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ioperm_noop.lo `test -f '$(srcdir)/../shared/ioperm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/ioperm_noop.c
 
 agp_noop.lo: $(srcdir)/../shared/agp_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT agp_noop.lo -MD -MP -MF $(DEPDIR)/agp_noop.Tpo -c -o agp_noop.lo `test -f '$(srcdir)/../shared/agp_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/agp_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/agp_noop.Tpo $(DEPDIR)/agp_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT agp_noop.lo -MD -MP -MF $(DEPDIR)/agp_noop.Tpo -c -o agp_noop.lo `test -f '$(srcdir)/../shared/agp_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/agp_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/agp_noop.Tpo $(DEPDIR)/agp_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/agp_noop.c' object='agp_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o agp_noop.lo `test -f '$(srcdir)/../shared/agp_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/agp_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o agp_noop.lo `test -f '$(srcdir)/../shared/agp_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/agp_noop.c
 
 lnx_agp.lo: $(srcdir)/../linux/lnx_agp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lnx_agp.lo -MD -MP -MF $(DEPDIR)/lnx_agp.Tpo -c -o lnx_agp.lo `test -f '$(srcdir)/../linux/lnx_agp.c' || echo '$(srcdir)/'`$(srcdir)/../linux/lnx_agp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/lnx_agp.Tpo $(DEPDIR)/lnx_agp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lnx_agp.lo -MD -MP -MF $(DEPDIR)/lnx_agp.Tpo -c -o lnx_agp.lo `test -f '$(srcdir)/../linux/lnx_agp.c' || echo '$(srcdir)/'`$(srcdir)/../linux/lnx_agp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/lnx_agp.Tpo $(DEPDIR)/lnx_agp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../linux/lnx_agp.c' object='lnx_agp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lnx_agp.lo `test -f '$(srcdir)/../linux/lnx_agp.c' || echo '$(srcdir)/'`$(srcdir)/../linux/lnx_agp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lnx_agp.lo `test -f '$(srcdir)/../linux/lnx_agp.c' || echo '$(srcdir)/'`$(srcdir)/../linux/lnx_agp.c
 
 pm_noop.lo: $(srcdir)/../shared/pm_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pm_noop.lo -MD -MP -MF $(DEPDIR)/pm_noop.Tpo -c -o pm_noop.lo `test -f '$(srcdir)/../shared/pm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/pm_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/pm_noop.Tpo $(DEPDIR)/pm_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pm_noop.lo -MD -MP -MF $(DEPDIR)/pm_noop.Tpo -c -o pm_noop.lo `test -f '$(srcdir)/../shared/pm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/pm_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/pm_noop.Tpo $(DEPDIR)/pm_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/pm_noop.c' object='pm_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pm_noop.lo `test -f '$(srcdir)/../shared/pm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/pm_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pm_noop.lo `test -f '$(srcdir)/../shared/pm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/pm_noop.c
 
 bsd_apm.lo: $(srcdir)/bsd_apm.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bsd_apm.lo -MD -MP -MF $(DEPDIR)/bsd_apm.Tpo -c -o bsd_apm.lo `test -f '$(srcdir)/bsd_apm.c' || echo '$(srcdir)/'`$(srcdir)/bsd_apm.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/bsd_apm.Tpo $(DEPDIR)/bsd_apm.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bsd_apm.lo -MD -MP -MF $(DEPDIR)/bsd_apm.Tpo -c -o bsd_apm.lo `test -f '$(srcdir)/bsd_apm.c' || echo '$(srcdir)/'`$(srcdir)/bsd_apm.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/bsd_apm.Tpo $(DEPDIR)/bsd_apm.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/bsd_apm.c' object='bsd_apm.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bsd_apm.lo `test -f '$(srcdir)/bsd_apm.c' || echo '$(srcdir)/'`$(srcdir)/bsd_apm.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bsd_apm.lo `test -f '$(srcdir)/bsd_apm.c' || echo '$(srcdir)/'`$(srcdir)/bsd_apm.c
 
 bsd_kqueue_apm.lo: $(srcdir)/bsd_kqueue_apm.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bsd_kqueue_apm.lo -MD -MP -MF $(DEPDIR)/bsd_kqueue_apm.Tpo -c -o bsd_kqueue_apm.lo `test -f '$(srcdir)/bsd_kqueue_apm.c' || echo '$(srcdir)/'`$(srcdir)/bsd_kqueue_apm.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/bsd_kqueue_apm.Tpo $(DEPDIR)/bsd_kqueue_apm.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bsd_kqueue_apm.lo -MD -MP -MF $(DEPDIR)/bsd_kqueue_apm.Tpo -c -o bsd_kqueue_apm.lo `test -f '$(srcdir)/bsd_kqueue_apm.c' || echo '$(srcdir)/'`$(srcdir)/bsd_kqueue_apm.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/bsd_kqueue_apm.Tpo $(DEPDIR)/bsd_kqueue_apm.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/bsd_kqueue_apm.c' object='bsd_kqueue_apm.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bsd_kqueue_apm.lo `test -f '$(srcdir)/bsd_kqueue_apm.c' || echo '$(srcdir)/'`$(srcdir)/bsd_kqueue_apm.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bsd_kqueue_apm.lo `test -f '$(srcdir)/bsd_kqueue_apm.c' || echo '$(srcdir)/'`$(srcdir)/bsd_kqueue_apm.c
 
 kmod_noop.lo: $(srcdir)/../shared/kmod_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT kmod_noop.lo -MD -MP -MF $(DEPDIR)/kmod_noop.Tpo -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/kmod_noop.Tpo $(DEPDIR)/kmod_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT kmod_noop.lo -MD -MP -MF $(DEPDIR)/kmod_noop.Tpo -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/kmod_noop.Tpo $(DEPDIR)/kmod_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/kmod_noop.c' object='kmod_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
 
 stdResource.lo: $(srcdir)/../shared/stdResource.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stdResource.lo -MD -MP -MF $(DEPDIR)/stdResource.Tpo -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/stdResource.Tpo $(DEPDIR)/stdResource.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stdResource.lo -MD -MP -MF $(DEPDIR)/stdResource.Tpo -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/stdResource.Tpo $(DEPDIR)/stdResource.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/stdResource.c' object='stdResource.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -622,7 +628,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -630,29 +636,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -673,13 +684,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -707,6 +722,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -728,6 +744,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -736,18 +754,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -785,6 +813,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/bus/Makefile.in b/xorg-server/hw/xfree86/os-support/bus/Makefile.in
index 77110b7d2..2396d4123 100644
--- a/xorg-server/hw/xfree86/os-support/bus/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/bus/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -53,6 +55,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libbus_la_LIBADD =
 am__libbus_la_SOURCES_DIST = Pci.c Pci.h linuxPci.c bsd_pci.c Sbus.c
@@ -65,6 +68,7 @@ libbus_la_OBJECTS = $(am_libbus_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -79,9 +83,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -217,6 +235,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -386,9 +405,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/bus/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/bus/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/bus/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/bus/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -406,6 +425,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -431,21 +451,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -458,20 +478,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -485,7 +508,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -493,29 +516,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -536,13 +564,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -573,6 +605,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -594,6 +627,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -602,18 +637,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -652,6 +697,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/hurd/Makefile.in b/xorg-server/hw/xfree86/os-support/hurd/Makefile.in
index 56206bd51..e09ad2617 100644
--- a/xorg-server/hw/xfree86/os-support/hurd/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/hurd/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libhurd_la_LIBADD =
 am_libhurd_la_OBJECTS = hurd_bell.lo hurd_init.lo hurd_mmap.lo \
@@ -57,6 +60,7 @@ libhurd_la_OBJECTS = $(am_libhurd_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -199,6 +203,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -371,9 +376,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/hurd/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/hurd/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/hurd/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/hurd/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -391,6 +396,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -423,73 +429,73 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 VTsw_noop.lo: $(srcdir)/../shared/VTsw_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT VTsw_noop.lo -MD -MP -MF $(DEPDIR)/VTsw_noop.Tpo -c -o VTsw_noop.lo `test -f '$(srcdir)/../shared/VTsw_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/VTsw_noop.Tpo $(DEPDIR)/VTsw_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT VTsw_noop.lo -MD -MP -MF $(DEPDIR)/VTsw_noop.Tpo -c -o VTsw_noop.lo `test -f '$(srcdir)/../shared/VTsw_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/VTsw_noop.Tpo $(DEPDIR)/VTsw_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/VTsw_noop.c' object='VTsw_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o VTsw_noop.lo `test -f '$(srcdir)/../shared/VTsw_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o VTsw_noop.lo `test -f '$(srcdir)/../shared/VTsw_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_noop.c
 
 posix_tty.lo: $(srcdir)/../shared/posix_tty.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT posix_tty.lo -MD -MP -MF $(DEPDIR)/posix_tty.Tpo -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/posix_tty.Tpo $(DEPDIR)/posix_tty.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT posix_tty.lo -MD -MP -MF $(DEPDIR)/posix_tty.Tpo -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/posix_tty.Tpo $(DEPDIR)/posix_tty.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/posix_tty.c' object='posix_tty.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
 
 stdResource.lo: $(srcdir)/../shared/stdResource.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stdResource.lo -MD -MP -MF $(DEPDIR)/stdResource.Tpo -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/stdResource.Tpo $(DEPDIR)/stdResource.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stdResource.lo -MD -MP -MF $(DEPDIR)/stdResource.Tpo -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/stdResource.Tpo $(DEPDIR)/stdResource.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/stdResource.c' object='stdResource.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
 
 sigiostubs.lo: $(srcdir)/../shared/sigiostubs.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigiostubs.lo -MD -MP -MF $(DEPDIR)/sigiostubs.Tpo -c -o sigiostubs.lo `test -f '$(srcdir)/../shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigiostubs.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/sigiostubs.Tpo $(DEPDIR)/sigiostubs.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigiostubs.lo -MD -MP -MF $(DEPDIR)/sigiostubs.Tpo -c -o sigiostubs.lo `test -f '$(srcdir)/../shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigiostubs.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/sigiostubs.Tpo $(DEPDIR)/sigiostubs.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/sigiostubs.c' object='sigiostubs.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigiostubs.lo `test -f '$(srcdir)/../shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigiostubs.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigiostubs.lo `test -f '$(srcdir)/../shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigiostubs.c
 
 pm_noop.lo: $(srcdir)/../shared/pm_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pm_noop.lo -MD -MP -MF $(DEPDIR)/pm_noop.Tpo -c -o pm_noop.lo `test -f '$(srcdir)/../shared/pm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/pm_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/pm_noop.Tpo $(DEPDIR)/pm_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pm_noop.lo -MD -MP -MF $(DEPDIR)/pm_noop.Tpo -c -o pm_noop.lo `test -f '$(srcdir)/../shared/pm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/pm_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/pm_noop.Tpo $(DEPDIR)/pm_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/pm_noop.c' object='pm_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pm_noop.lo `test -f '$(srcdir)/../shared/pm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/pm_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pm_noop.lo `test -f '$(srcdir)/../shared/pm_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/pm_noop.c
 
 kmod_noop.lo: $(srcdir)/../shared/kmod_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT kmod_noop.lo -MD -MP -MF $(DEPDIR)/kmod_noop.Tpo -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/kmod_noop.Tpo $(DEPDIR)/kmod_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT kmod_noop.lo -MD -MP -MF $(DEPDIR)/kmod_noop.Tpo -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/kmod_noop.Tpo $(DEPDIR)/kmod_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/kmod_noop.c' object='kmod_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
 
 agp_noop.lo: $(srcdir)/../shared/agp_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT agp_noop.lo -MD -MP -MF $(DEPDIR)/agp_noop.Tpo -c -o agp_noop.lo `test -f '$(srcdir)/../shared/agp_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/agp_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/agp_noop.Tpo $(DEPDIR)/agp_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT agp_noop.lo -MD -MP -MF $(DEPDIR)/agp_noop.Tpo -c -o agp_noop.lo `test -f '$(srcdir)/../shared/agp_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/agp_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/agp_noop.Tpo $(DEPDIR)/agp_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/agp_noop.c' object='agp_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o agp_noop.lo `test -f '$(srcdir)/../shared/agp_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/agp_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o agp_noop.lo `test -f '$(srcdir)/../shared/agp_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/agp_noop.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -509,7 +515,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -517,29 +523,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -560,13 +571,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -594,6 +609,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -615,6 +631,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -623,18 +641,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -672,6 +700,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/linux/Makefile.in b/xorg-server/hw/xfree86/os-support/linux/Makefile.in
index 2d3aa3e34..51eb3a366 100644
--- a/xorg-server/hw/xfree86/os-support/linux/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/linux/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -51,6 +53,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 @LINUX_ALPHA_TRUE@liblinux_la_DEPENDENCIES = liblinuxev56.la
 am__liblinux_la_SOURCES_DIST = lnx_init.c lnx_video.c lnx_pci.c \
@@ -81,6 +84,7 @@ liblinuxev56_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -224,6 +228,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -419,9 +424,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/linux/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/linux/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/linux/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/linux/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -439,6 +444,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -480,94 +486,94 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 bios_mmap.lo: $(srcdir)/../shared/bios_mmap.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bios_mmap.lo -MD -MP -MF $(DEPDIR)/bios_mmap.Tpo -c -o bios_mmap.lo `test -f '$(srcdir)/../shared/bios_mmap.c' || echo '$(srcdir)/'`$(srcdir)/../shared/bios_mmap.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/bios_mmap.Tpo $(DEPDIR)/bios_mmap.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bios_mmap.lo -MD -MP -MF $(DEPDIR)/bios_mmap.Tpo -c -o bios_mmap.lo `test -f '$(srcdir)/../shared/bios_mmap.c' || echo '$(srcdir)/'`$(srcdir)/../shared/bios_mmap.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/bios_mmap.Tpo $(DEPDIR)/bios_mmap.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/bios_mmap.c' object='bios_mmap.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bios_mmap.lo `test -f '$(srcdir)/../shared/bios_mmap.c' || echo '$(srcdir)/'`$(srcdir)/../shared/bios_mmap.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bios_mmap.lo `test -f '$(srcdir)/../shared/bios_mmap.c' || echo '$(srcdir)/'`$(srcdir)/../shared/bios_mmap.c
 
 VTsw_usl.lo: $(srcdir)/../shared/VTsw_usl.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT VTsw_usl.lo -MD -MP -MF $(DEPDIR)/VTsw_usl.Tpo -c -o VTsw_usl.lo `test -f '$(srcdir)/../shared/VTsw_usl.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_usl.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/VTsw_usl.Tpo $(DEPDIR)/VTsw_usl.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT VTsw_usl.lo -MD -MP -MF $(DEPDIR)/VTsw_usl.Tpo -c -o VTsw_usl.lo `test -f '$(srcdir)/../shared/VTsw_usl.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_usl.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/VTsw_usl.Tpo $(DEPDIR)/VTsw_usl.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/VTsw_usl.c' object='VTsw_usl.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o VTsw_usl.lo `test -f '$(srcdir)/../shared/VTsw_usl.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_usl.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o VTsw_usl.lo `test -f '$(srcdir)/../shared/VTsw_usl.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_usl.c
 
 posix_tty.lo: $(srcdir)/../shared/posix_tty.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT posix_tty.lo -MD -MP -MF $(DEPDIR)/posix_tty.Tpo -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/posix_tty.Tpo $(DEPDIR)/posix_tty.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT posix_tty.lo -MD -MP -MF $(DEPDIR)/posix_tty.Tpo -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/posix_tty.Tpo $(DEPDIR)/posix_tty.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/posix_tty.c' object='posix_tty.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
 
 vidmem.lo: $(srcdir)/../shared/vidmem.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT vidmem.lo -MD -MP -MF $(DEPDIR)/vidmem.Tpo -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/vidmem.Tpo $(DEPDIR)/vidmem.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT vidmem.lo -MD -MP -MF $(DEPDIR)/vidmem.Tpo -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/vidmem.Tpo $(DEPDIR)/vidmem.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/vidmem.c' object='vidmem.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
 
 sigio.lo: $(srcdir)/../shared/sigio.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigio.lo -MD -MP -MF $(DEPDIR)/sigio.Tpo -c -o sigio.lo `test -f '$(srcdir)/../shared/sigio.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigio.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/sigio.Tpo $(DEPDIR)/sigio.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigio.lo -MD -MP -MF $(DEPDIR)/sigio.Tpo -c -o sigio.lo `test -f '$(srcdir)/../shared/sigio.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigio.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/sigio.Tpo $(DEPDIR)/sigio.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/sigio.c' object='sigio.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigio.lo `test -f '$(srcdir)/../shared/sigio.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigio.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigio.lo `test -f '$(srcdir)/../shared/sigio.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigio.c
 
 stdResource.lo: $(srcdir)/../shared/stdResource.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stdResource.lo -MD -MP -MF $(DEPDIR)/stdResource.Tpo -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/stdResource.Tpo $(DEPDIR)/stdResource.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stdResource.lo -MD -MP -MF $(DEPDIR)/stdResource.Tpo -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/stdResource.Tpo $(DEPDIR)/stdResource.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/stdResource.c' object='stdResource.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
 
 lnx_axp.lo: $(srcdir)/lnx_axp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lnx_axp.lo -MD -MP -MF $(DEPDIR)/lnx_axp.Tpo -c -o lnx_axp.lo `test -f '$(srcdir)/lnx_axp.c' || echo '$(srcdir)/'`$(srcdir)/lnx_axp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/lnx_axp.Tpo $(DEPDIR)/lnx_axp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lnx_axp.lo -MD -MP -MF $(DEPDIR)/lnx_axp.Tpo -c -o lnx_axp.lo `test -f '$(srcdir)/lnx_axp.c' || echo '$(srcdir)/'`$(srcdir)/lnx_axp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/lnx_axp.Tpo $(DEPDIR)/lnx_axp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/lnx_axp.c' object='lnx_axp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lnx_axp.lo `test -f '$(srcdir)/lnx_axp.c' || echo '$(srcdir)/'`$(srcdir)/lnx_axp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lnx_axp.lo `test -f '$(srcdir)/lnx_axp.c' || echo '$(srcdir)/'`$(srcdir)/lnx_axp.c
 
 xf86Axp.lo: $(srcdir)/../shared/xf86Axp.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xf86Axp.lo -MD -MP -MF $(DEPDIR)/xf86Axp.Tpo -c -o xf86Axp.lo `test -f '$(srcdir)/../shared/xf86Axp.c' || echo '$(srcdir)/'`$(srcdir)/../shared/xf86Axp.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/xf86Axp.Tpo $(DEPDIR)/xf86Axp.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xf86Axp.lo -MD -MP -MF $(DEPDIR)/xf86Axp.Tpo -c -o xf86Axp.lo `test -f '$(srcdir)/../shared/xf86Axp.c' || echo '$(srcdir)/'`$(srcdir)/../shared/xf86Axp.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/xf86Axp.Tpo $(DEPDIR)/xf86Axp.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/xf86Axp.c' object='xf86Axp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xf86Axp.lo `test -f '$(srcdir)/../shared/xf86Axp.c' || echo '$(srcdir)/'`$(srcdir)/../shared/xf86Axp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xf86Axp.lo `test -f '$(srcdir)/../shared/xf86Axp.c' || echo '$(srcdir)/'`$(srcdir)/../shared/xf86Axp.c
 
 ia64Pci.lo: $(srcdir)/../shared/ia64Pci.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ia64Pci.lo -MD -MP -MF $(DEPDIR)/ia64Pci.Tpo -c -o ia64Pci.lo `test -f '$(srcdir)/../shared/ia64Pci.c' || echo '$(srcdir)/'`$(srcdir)/../shared/ia64Pci.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/ia64Pci.Tpo $(DEPDIR)/ia64Pci.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ia64Pci.lo -MD -MP -MF $(DEPDIR)/ia64Pci.Tpo -c -o ia64Pci.lo `test -f '$(srcdir)/../shared/ia64Pci.c' || echo '$(srcdir)/'`$(srcdir)/../shared/ia64Pci.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/ia64Pci.Tpo $(DEPDIR)/ia64Pci.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/ia64Pci.c' object='ia64Pci.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ia64Pci.lo `test -f '$(srcdir)/../shared/ia64Pci.c' || echo '$(srcdir)/'`$(srcdir)/../shared/ia64Pci.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ia64Pci.lo `test -f '$(srcdir)/../shared/ia64Pci.c' || echo '$(srcdir)/'`$(srcdir)/../shared/ia64Pci.c
 
 liblinuxev56_la-lnx_ev56.lo: lnx_ev56.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblinuxev56_la_CFLAGS) $(CFLAGS) -MT liblinuxev56_la-lnx_ev56.lo -MD -MP -MF $(DEPDIR)/liblinuxev56_la-lnx_ev56.Tpo -c -o liblinuxev56_la-lnx_ev56.lo `test -f 'lnx_ev56.c' || echo '$(srcdir)/'`lnx_ev56.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/liblinuxev56_la-lnx_ev56.Tpo $(DEPDIR)/liblinuxev56_la-lnx_ev56.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblinuxev56_la_CFLAGS) $(CFLAGS) -MT liblinuxev56_la-lnx_ev56.lo -MD -MP -MF $(DEPDIR)/liblinuxev56_la-lnx_ev56.Tpo -c -o liblinuxev56_la-lnx_ev56.lo `test -f 'lnx_ev56.c' || echo '$(srcdir)/'`lnx_ev56.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/liblinuxev56_la-lnx_ev56.Tpo $(DEPDIR)/liblinuxev56_la-lnx_ev56.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lnx_ev56.c' object='liblinuxev56_la-lnx_ev56.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblinuxev56_la_CFLAGS) $(CFLAGS) -c -o liblinuxev56_la-lnx_ev56.lo `test -f 'lnx_ev56.c' || echo '$(srcdir)/'`lnx_ev56.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblinuxev56_la_CFLAGS) $(CFLAGS) -c -o liblinuxev56_la-lnx_ev56.lo `test -f 'lnx_ev56.c' || echo '$(srcdir)/'`lnx_ev56.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -587,7 +593,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -595,29 +601,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -638,13 +649,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -672,6 +687,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -693,6 +709,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -701,18 +719,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -750,6 +778,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/misc/Makefile.in b/xorg-server/hw/xfree86/os-support/misc/Makefile.in
index a641ebf57..e69b9ae8a 100644
--- a/xorg-server/hw/xfree86/os-support/misc/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/misc/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libmisc_la_LIBADD =
 am_libmisc_la_OBJECTS = Delay.lo BUSmemcpy.lo SlowBcopy.lo
@@ -55,6 +58,7 @@ libmisc_la_OBJECTS = $(am_libmisc_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -197,6 +201,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -363,9 +368,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/misc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/misc/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/misc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/misc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -383,6 +388,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -407,21 +413,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -444,7 +450,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -452,29 +458,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -495,13 +506,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -529,6 +544,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -550,6 +566,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -558,18 +576,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -607,6 +635,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/sco/Makefile.in b/xorg-server/hw/xfree86/os-support/sco/Makefile.in
index a5156c488..8baed7330 100644
--- a/xorg-server/hw/xfree86/os-support/sco/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/sco/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,6 +49,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -181,6 +184,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -345,9 +349,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/sco/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/sco/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/sco/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/sco/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -365,6 +369,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -394,13 +399,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -428,6 +437,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -446,6 +456,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -454,18 +466,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -499,6 +521,7 @@ uninstall-am:
 	maintainer-clean-generic mostlyclean mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/solaris/Makefile.in b/xorg-server/hw/xfree86/os-support/solaris/Makefile.in
index f248e41d2..74baaea27 100644
--- a/xorg-server/hw/xfree86/os-support/solaris/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/solaris/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libsolaris_la_LIBADD =
 am__libsolaris_la_SOURCES_DIST = sun_init.c sun_vid.c sun_bell.c \
@@ -71,6 +74,7 @@ libsolaris_la_OBJECTS = $(am_libsolaris_la_OBJECTS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
 LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -89,10 +93,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)" "$(DESTDIR)$(sdkdir)"
-nodist_sdkHEADERS_INSTALL = $(INSTALL_HEADER)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(nodist_sdk_HEADERS) $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -228,6 +245,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -415,9 +433,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/solaris/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/solaris/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/solaris/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/solaris/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -435,6 +453,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -469,94 +488,94 @@ distclean-compile:
 
 .S.o:
 @am__fastdepCCAS_TRUE@	$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCCAS_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCCAS_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCCAS_FALSE@	$(CPPASCOMPILE) -c -o $@ $<
 
 .S.obj:
 @am__fastdepCCAS_TRUE@	$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCCAS_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCCAS_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCCAS_FALSE@	$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .S.lo:
 @am__fastdepCCAS_TRUE@	$(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCCAS_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCCAS_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCCAS_FALSE@	$(LTCPPASCOMPILE) -c -o $@ $<
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 kmod_noop.lo: $(srcdir)/../shared/kmod_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT kmod_noop.lo -MD -MP -MF $(DEPDIR)/kmod_noop.Tpo -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/kmod_noop.Tpo $(DEPDIR)/kmod_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT kmod_noop.lo -MD -MP -MF $(DEPDIR)/kmod_noop.Tpo -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/kmod_noop.Tpo $(DEPDIR)/kmod_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/kmod_noop.c' object='kmod_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o kmod_noop.lo `test -f '$(srcdir)/../shared/kmod_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/kmod_noop.c
 
 posix_tty.lo: $(srcdir)/../shared/posix_tty.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT posix_tty.lo -MD -MP -MF $(DEPDIR)/posix_tty.Tpo -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/posix_tty.Tpo $(DEPDIR)/posix_tty.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT posix_tty.lo -MD -MP -MF $(DEPDIR)/posix_tty.Tpo -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/posix_tty.Tpo $(DEPDIR)/posix_tty.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/posix_tty.c' object='posix_tty.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o posix_tty.lo `test -f '$(srcdir)/../shared/posix_tty.c' || echo '$(srcdir)/'`$(srcdir)/../shared/posix_tty.c
 
 sigiostubs.lo: $(srcdir)/../shared/sigiostubs.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigiostubs.lo -MD -MP -MF $(DEPDIR)/sigiostubs.Tpo -c -o sigiostubs.lo `test -f '$(srcdir)/../shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigiostubs.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/sigiostubs.Tpo $(DEPDIR)/sigiostubs.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sigiostubs.lo -MD -MP -MF $(DEPDIR)/sigiostubs.Tpo -c -o sigiostubs.lo `test -f '$(srcdir)/../shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigiostubs.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/sigiostubs.Tpo $(DEPDIR)/sigiostubs.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/sigiostubs.c' object='sigiostubs.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigiostubs.lo `test -f '$(srcdir)/../shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigiostubs.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sigiostubs.lo `test -f '$(srcdir)/../shared/sigiostubs.c' || echo '$(srcdir)/'`$(srcdir)/../shared/sigiostubs.c
 
 stdResource.lo: $(srcdir)/../shared/stdResource.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stdResource.lo -MD -MP -MF $(DEPDIR)/stdResource.Tpo -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/stdResource.Tpo $(DEPDIR)/stdResource.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stdResource.lo -MD -MP -MF $(DEPDIR)/stdResource.Tpo -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/stdResource.Tpo $(DEPDIR)/stdResource.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/stdResource.c' object='stdResource.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stdResource.lo `test -f '$(srcdir)/../shared/stdResource.c' || echo '$(srcdir)/'`$(srcdir)/../shared/stdResource.c
 
 vidmem.lo: $(srcdir)/../shared/vidmem.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT vidmem.lo -MD -MP -MF $(DEPDIR)/vidmem.Tpo -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/vidmem.Tpo $(DEPDIR)/vidmem.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT vidmem.lo -MD -MP -MF $(DEPDIR)/vidmem.Tpo -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/vidmem.Tpo $(DEPDIR)/vidmem.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/vidmem.c' object='vidmem.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o vidmem.lo `test -f '$(srcdir)/../shared/vidmem.c' || echo '$(srcdir)/'`$(srcdir)/../shared/vidmem.c
 
 VTsw_noop.lo: $(srcdir)/../shared/VTsw_noop.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT VTsw_noop.lo -MD -MP -MF $(DEPDIR)/VTsw_noop.Tpo -c -o VTsw_noop.lo `test -f '$(srcdir)/../shared/VTsw_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_noop.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/VTsw_noop.Tpo $(DEPDIR)/VTsw_noop.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT VTsw_noop.lo -MD -MP -MF $(DEPDIR)/VTsw_noop.Tpo -c -o VTsw_noop.lo `test -f '$(srcdir)/../shared/VTsw_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_noop.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/VTsw_noop.Tpo $(DEPDIR)/VTsw_noop.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/VTsw_noop.c' object='VTsw_noop.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o VTsw_noop.lo `test -f '$(srcdir)/../shared/VTsw_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_noop.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o VTsw_noop.lo `test -f '$(srcdir)/../shared/VTsw_noop.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_noop.c
 
 VTsw_usl.lo: $(srcdir)/../shared/VTsw_usl.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT VTsw_usl.lo -MD -MP -MF $(DEPDIR)/VTsw_usl.Tpo -c -o VTsw_usl.lo `test -f '$(srcdir)/../shared/VTsw_usl.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_usl.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/VTsw_usl.Tpo $(DEPDIR)/VTsw_usl.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT VTsw_usl.lo -MD -MP -MF $(DEPDIR)/VTsw_usl.Tpo -c -o VTsw_usl.lo `test -f '$(srcdir)/../shared/VTsw_usl.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_usl.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/VTsw_usl.Tpo $(DEPDIR)/VTsw_usl.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(srcdir)/../shared/VTsw_usl.c' object='VTsw_usl.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o VTsw_usl.lo `test -f '$(srcdir)/../shared/VTsw_usl.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_usl.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o VTsw_usl.lo `test -f '$(srcdir)/../shared/VTsw_usl.c' || echo '$(srcdir)/'`$(srcdir)/../shared/VTsw_usl.c
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -566,37 +585,43 @@ clean-libtool:
 install-nodist_sdkHEADERS: $(nodist_sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(nodist_sdk_HEADERS)'; for p in $$list; do \
+	@list='$(nodist_sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(nodist_sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(nodist_sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-nodist_sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(nodist_sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(nodist_sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -610,7 +635,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -618,29 +643,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -661,13 +691,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -698,6 +732,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
@@ -720,6 +755,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -728,18 +765,28 @@ install-data-am: install-nodist_sdkHEADERS install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -782,6 +829,7 @@ uninstall-am: uninstall-nodist_sdkHEADERS uninstall-sdkHEADERS
 
 solaris-@SOLARIS_INOUT_ARCH@.il: solaris-@SOLARIS_INOUT_ARCH@.S
 	$(CPP) -P -DINLINE_ASM solaris-@SOLARIS_INOUT_ARCH@.S > $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/sysv/Makefile.in b/xorg-server/hw/xfree86/os-support/sysv/Makefile.in
index b574c0288..c2eff591c 100644
--- a/xorg-server/hw/xfree86/os-support/sysv/Makefile.in
+++ b/xorg-server/hw/xfree86/os-support/sysv/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,6 +49,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -181,6 +184,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -340,9 +344,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/sysv/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/sysv/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/os-support/sysv/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/os-support/sysv/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -360,6 +364,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -389,13 +394,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -423,6 +432,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -441,6 +451,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -449,18 +461,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -494,6 +516,7 @@ uninstall-am:
 	maintainer-clean-generic mostlyclean mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/parser/Makefile.am b/xorg-server/hw/xfree86/parser/Makefile.am
index 6ed181461..a2774a47e 100644
--- a/xorg-server/hw/xfree86/parser/Makefile.am
+++ b/xorg-server/hw/xfree86/parser/Makefile.am
@@ -1,8 +1,5 @@
 if INSTALL_LIBXF86CONFIG
 lib_LIBRARIES = libxf86config.a
-LIBHEADERS = \
-	xf86Optrec.h \
-	xf86Parser.h
 else
 noinst_LIBRARIES = libxf86config.a
 endif
@@ -30,9 +27,8 @@ AM_CFLAGS = $(DIX_CFLAGS) $(XORG_CFLAGS)
 EXTRA_DIST = \
 	Configint.h \
 	configProcs.h \
-	xf86Optrec.h \
-	xf86Parser.h \
 	xf86tokens.h
 
 sdk_HEADERS = \
-	$(LIBHEADERS)
+	xf86Optrec.h \
+	xf86Parser.h
diff --git a/xorg-server/hw/xfree86/parser/Makefile.in b/xorg-server/hw/xfree86/parser/Makefile.in
index ce3156ec1..e49c50837 100644
--- a/xorg-server/hw/xfree86/parser/Makefile.in
+++ b/xorg-server/hw/xfree86/parser/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -34,7 +36,7 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = hw/xfree86/parser
-DIST_COMMON = $(am__sdk_HEADERS_DIST) $(srcdir)/Makefile.am \
+DIST_COMMON = $(sdk_HEADERS) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(sdkdir)"
-libLIBRARIES_INSTALL = $(INSTALL_DATA)
 LIBRARIES = $(lib_LIBRARIES) $(noinst_LIBRARIES)
 ARFLAGS = cru
 libxf86config_a_AR = $(AR) $(ARFLAGS)
@@ -72,6 +89,7 @@ libxf86config_a_OBJECTS = $(am_libxf86config_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -80,8 +98,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libxf86config_a_SOURCES)
 DIST_SOURCES = $(libxf86config_a_SOURCES)
-am__sdk_HEADERS_DIST = xf86Optrec.h xf86Parser.h
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -217,6 +233,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -364,10 +381,6 @@ top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 @INSTALL_LIBXF86CONFIG_TRUE@lib_LIBRARIES = libxf86config.a
-@INSTALL_LIBXF86CONFIG_TRUE@LIBHEADERS = \
-@INSTALL_LIBXF86CONFIG_TRUE@	xf86Optrec.h \
-@INSTALL_LIBXF86CONFIG_TRUE@	xf86Parser.h
-
 @INSTALL_LIBXF86CONFIG_FALSE@noinst_LIBRARIES = libxf86config.a
 libxf86config_a_SOURCES = \
 	Device.c \
@@ -391,12 +404,11 @@ AM_CFLAGS = $(DIX_CFLAGS) $(XORG_CFLAGS)
 EXTRA_DIST = \
 	Configint.h \
 	configProcs.h \
-	xf86Optrec.h \
-	xf86Parser.h \
 	xf86tokens.h
 
 sdk_HEADERS = \
-	$(LIBHEADERS)
+	xf86Optrec.h \
+	xf86Parser.h
 
 all: all-am
 
@@ -411,9 +423,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/parser/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/parser/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/parser/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/parser/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -431,32 +443,36 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-libLIBRARIES: $(lib_LIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
-	@list='$(lib_LIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(libLIBRARIES_INSTALL) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(libLIBRARIES_INSTALL) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(INSTALL_DATA) $$list2 "$(DESTDIR)$(libdir)" || exit $$?; }
 	@$(POST_INSTALL)
-	@list='$(lib_LIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
 	  if test -f $$p; then \
-	    p=$(am__strip_dir) \
-	    echo " $(RANLIB) '$(DESTDIR)$(libdir)/$$p'"; \
-	    $(RANLIB) "$(DESTDIR)$(libdir)/$$p"; \
+	    $(am__strip_dir) \
+	    echo " ( cd '$(DESTDIR)$(libdir)' && $(RANLIB) $$f )"; \
+	    ( cd "$(DESTDIR)$(libdir)" && $(RANLIB) $$f ) || exit $$?; \
 	  else :; fi; \
 	done
 
 uninstall-libLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  rm -f "$(DESTDIR)$(libdir)/$$p"; \
-	done
+	@list='$(lib_LIBRARIES)'; test -n "$(libdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(libdir)' && rm -f "$$files" )"; \
+	cd "$(DESTDIR)$(libdir)" && rm -f $$files
 
 clean-libLIBRARIES:
 	-test -z "$(lib_LIBRARIES)" || rm -f $(lib_LIBRARIES)
@@ -493,21 +509,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -520,20 +536,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -547,7 +566,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -555,29 +574,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -598,13 +622,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -635,6 +663,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -656,6 +685,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -664,18 +695,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-libLIBRARIES
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -715,6 +756,7 @@ uninstall-am: uninstall-libLIBRARIES uninstall-sdkHEADERS
 	pdf pdf-am ps ps-am tags uninstall uninstall-am \
 	uninstall-libLIBRARIES uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/ramdac/Makefile.in b/xorg-server/hw/xfree86/ramdac/Makefile.in
index 9be7b8179..7290a2e45 100644
--- a/xorg-server/hw/xfree86/ramdac/Makefile.in
+++ b/xorg-server/hw/xfree86/ramdac/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libramdac_a_AR = $(AR) $(ARFLAGS)
@@ -61,6 +64,7 @@ libramdac_a_OBJECTS = $(am_libramdac_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -74,9 +78,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -212,6 +230,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -385,9 +404,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/ramdac/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/ramdac/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/ramdac/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/ramdac/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -405,6 +424,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -430,21 +450,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -457,20 +477,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -484,7 +507,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -492,29 +515,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -535,13 +563,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -572,6 +604,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
@@ -594,6 +627,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -602,18 +637,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -656,6 +701,7 @@ uninstall-am: uninstall-sdkHEADERS
 xf86BitOrder.c:
 	echo "#define XAAReverseBitOrder xf86ReverseBitOrder" > $@
 	echo "#include \"$(srcdir)/../xaa/xaaBitOrder.c\"" >> $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/shadowfb/Makefile.in b/xorg-server/hw/xfree86/shadowfb/Makefile.in
index 05c16caea..e81ab786a 100644
--- a/xorg-server/hw/xfree86/shadowfb/Makefile.in
+++ b/xorg-server/hw/xfree86/shadowfb/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(moduledir)" "$(DESTDIR)$(sdkdir)"
-moduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(module_LTLIBRARIES)
 libshadowfb_la_LIBADD =
 am_libshadowfb_la_OBJECTS = sfbmodule.lo shadow.lo
@@ -68,6 +85,7 @@ libshadowfb_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -76,7 +94,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libshadowfb_la_SOURCES)
 DIST_SOURCES = $(libshadowfb_la_SOURCES)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -212,6 +229,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -377,9 +395,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/shadowfb/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/shadowfb/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/shadowfb/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/shadowfb/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -397,23 +415,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-moduleLTLIBRARIES: $(module_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(moduledir)" || $(MKDIR_P) "$(DESTDIR)$(moduledir)"
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(moduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(moduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(moduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(moduledir)"; \
+	}
 
 uninstall-moduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$p"; \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$f"; \
 	done
 
 clean-moduleLTLIBRARIES:
@@ -438,21 +461,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -465,20 +488,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -492,7 +518,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -500,29 +526,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -543,13 +574,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -580,6 +615,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -601,6 +637,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -609,18 +647,28 @@ install-data-am: install-moduleLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -660,6 +708,7 @@ uninstall-am: uninstall-moduleLTLIBRARIES uninstall-sdkHEADERS
 	tags uninstall uninstall-am uninstall-moduleLTLIBRARIES \
 	uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/utils/Makefile.in b/xorg-server/hw/xfree86/utils/Makefile.in
index 1fdee4a54..7c3f2313f 100644
--- a/xorg-server/hw/xfree86/utils/Makefile.in
+++ b/xorg-server/hw/xfree86/utils/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,6 +49,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -58,10 +61,38 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -193,6 +224,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -355,9 +387,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/utils/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/utils/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/utils/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/utils/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -375,6 +407,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -406,7 +439,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -440,16 +473,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -464,7 +497,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -476,7 +509,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -485,29 +518,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -528,29 +566,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -580,6 +633,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -598,6 +652,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -606,18 +662,28 @@ install-data-am:
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -638,8 +704,8 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -655,6 +721,7 @@ uninstall-am:
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/utils/cvt/Makefile.in b/xorg-server/hw/xfree86/utils/cvt/Makefile.in
index 7cf615b34..a5eba3dfa 100644
--- a/xorg-server/hw/xfree86/utils/cvt/Makefile.in
+++ b/xorg-server/hw/xfree86/utils/cvt/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -48,8 +49,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -82,8 +84,8 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_cvt_OBJECTS = cvt-cvt.$(OBJEXT) cvt-xf86cvt.$(OBJEXT)
 cvt_OBJECTS = $(am_cvt_OBJECTS)
@@ -95,6 +97,7 @@ cvt_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -103,6 +106,27 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(cvt_SOURCES)
 DIST_SOURCES = $(cvt_SOURCES)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 man1dir = $(mandir)/man1
 NROFF = nroff
 MANS = $(man1_MANS)
@@ -240,6 +264,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -446,9 +471,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/utils/cvt/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/utils/cvt/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/utils/cvt/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/utils/cvt/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -466,34 +491,50 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 cvt$(EXEEXT): $(cvt_OBJECTS) $(cvt_DEPENDENCIES) 
 	@rm -f cvt$(EXEEXT)
 	$(cvt_LINK) $(cvt_OBJECTS) $(cvt_LDADD) $(LIBS)
@@ -509,49 +550,49 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 cvt-cvt.o: cvt.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cvt_CFLAGS) $(CFLAGS) -MT cvt-cvt.o -MD -MP -MF $(DEPDIR)/cvt-cvt.Tpo -c -o cvt-cvt.o `test -f 'cvt.c' || echo '$(srcdir)/'`cvt.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/cvt-cvt.Tpo $(DEPDIR)/cvt-cvt.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/cvt-cvt.Tpo $(DEPDIR)/cvt-cvt.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='cvt.c' object='cvt-cvt.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cvt_CFLAGS) $(CFLAGS) -c -o cvt-cvt.o `test -f 'cvt.c' || echo '$(srcdir)/'`cvt.c
 
 cvt-cvt.obj: cvt.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cvt_CFLAGS) $(CFLAGS) -MT cvt-cvt.obj -MD -MP -MF $(DEPDIR)/cvt-cvt.Tpo -c -o cvt-cvt.obj `if test -f 'cvt.c'; then $(CYGPATH_W) 'cvt.c'; else $(CYGPATH_W) '$(srcdir)/cvt.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/cvt-cvt.Tpo $(DEPDIR)/cvt-cvt.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/cvt-cvt.Tpo $(DEPDIR)/cvt-cvt.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='cvt.c' object='cvt-cvt.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cvt_CFLAGS) $(CFLAGS) -c -o cvt-cvt.obj `if test -f 'cvt.c'; then $(CYGPATH_W) 'cvt.c'; else $(CYGPATH_W) '$(srcdir)/cvt.c'; fi`
 
 cvt-xf86cvt.o: $(top_srcdir)/hw/xfree86/modes/xf86cvt.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cvt_CFLAGS) $(CFLAGS) -MT cvt-xf86cvt.o -MD -MP -MF $(DEPDIR)/cvt-xf86cvt.Tpo -c -o cvt-xf86cvt.o `test -f '$(top_srcdir)/hw/xfree86/modes/xf86cvt.c' || echo '$(srcdir)/'`$(top_srcdir)/hw/xfree86/modes/xf86cvt.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/cvt-xf86cvt.Tpo $(DEPDIR)/cvt-xf86cvt.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/cvt-xf86cvt.Tpo $(DEPDIR)/cvt-xf86cvt.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/hw/xfree86/modes/xf86cvt.c' object='cvt-xf86cvt.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cvt_CFLAGS) $(CFLAGS) -c -o cvt-xf86cvt.o `test -f '$(top_srcdir)/hw/xfree86/modes/xf86cvt.c' || echo '$(srcdir)/'`$(top_srcdir)/hw/xfree86/modes/xf86cvt.c
 
 cvt-xf86cvt.obj: $(top_srcdir)/hw/xfree86/modes/xf86cvt.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cvt_CFLAGS) $(CFLAGS) -MT cvt-xf86cvt.obj -MD -MP -MF $(DEPDIR)/cvt-xf86cvt.Tpo -c -o cvt-xf86cvt.obj `if test -f '$(top_srcdir)/hw/xfree86/modes/xf86cvt.c'; then $(CYGPATH_W) '$(top_srcdir)/hw/xfree86/modes/xf86cvt.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/hw/xfree86/modes/xf86cvt.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/cvt-xf86cvt.Tpo $(DEPDIR)/cvt-xf86cvt.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/cvt-xf86cvt.Tpo $(DEPDIR)/cvt-xf86cvt.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/hw/xfree86/modes/xf86cvt.c' object='cvt-xf86cvt.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cvt_CFLAGS) $(CFLAGS) -c -o cvt-xf86cvt.obj `if test -f '$(top_srcdir)/hw/xfree86/modes/xf86cvt.c'; then $(CYGPATH_W) '$(top_srcdir)/hw/xfree86/modes/xf86cvt.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/hw/xfree86/modes/xf86cvt.c'; fi`
@@ -561,51 +602,40 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-install-man1: $(man1_MANS) $(man_MANS)
+install-man1: $(man1_MANS)
 	@$(NORMAL_INSTALL)
 	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
+	@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
 	done; \
-	for i in $$list; do \
-	  if test -f $$i; then file=$$i; \
-	  else file=$(srcdir)/$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
 uninstall-man1:
 	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
+	@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	test -z "$$files" || { \
+	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -619,7 +649,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -627,34 +657,52 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -670,13 +718,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -708,6 +760,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -728,6 +781,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -736,18 +791,28 @@ install-data-am: install-man
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man: install-man1
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -795,6 +860,7 @@ uninstall-man: uninstall-man1
 
 .man.pre.man:
 	$(RAWCPP) $(RAWCPPFLAGS) $(MANDEFS) $(EXTRAMANDEFS) < $< | $(CPP_SED_MAGIC) > $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/utils/gtf/Makefile.in b/xorg-server/hw/xfree86/utils/gtf/Makefile.in
index 0e33af399..56114fc4c 100644
--- a/xorg-server/hw/xfree86/utils/gtf/Makefile.in
+++ b/xorg-server/hw/xfree86/utils/gtf/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -49,8 +50,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -83,8 +85,8 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_gtf_OBJECTS = gtf-gtf.$(OBJEXT)
 gtf_OBJECTS = $(am_gtf_OBJECTS)
@@ -95,6 +97,7 @@ gtf_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -108,8 +111,22 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-appmanDATA_INSTALL = $(INSTALL_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 DATA = $(appman_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -245,6 +262,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -448,9 +466,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/utils/gtf/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/utils/gtf/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/utils/gtf/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/utils/gtf/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -468,34 +486,50 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 gtf$(EXEEXT): $(gtf_OBJECTS) $(gtf_DEPENDENCIES) 
 	@rm -f gtf$(EXEEXT)
 	$(gtf_LINK) $(gtf_OBJECTS) $(gtf_LDADD) $(LIBS)
@@ -510,35 +544,35 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 gtf-gtf.o: gtf.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtf_CFLAGS) $(CFLAGS) -MT gtf-gtf.o -MD -MP -MF $(DEPDIR)/gtf-gtf.Tpo -c -o gtf-gtf.o `test -f 'gtf.c' || echo '$(srcdir)/'`gtf.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/gtf-gtf.Tpo $(DEPDIR)/gtf-gtf.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/gtf-gtf.Tpo $(DEPDIR)/gtf-gtf.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='gtf.c' object='gtf-gtf.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtf_CFLAGS) $(CFLAGS) -c -o gtf-gtf.o `test -f 'gtf.c' || echo '$(srcdir)/'`gtf.c
 
 gtf-gtf.obj: gtf.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtf_CFLAGS) $(CFLAGS) -MT gtf-gtf.obj -MD -MP -MF $(DEPDIR)/gtf-gtf.Tpo -c -o gtf-gtf.obj `if test -f 'gtf.c'; then $(CYGPATH_W) 'gtf.c'; else $(CYGPATH_W) '$(srcdir)/gtf.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/gtf-gtf.Tpo $(DEPDIR)/gtf-gtf.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/gtf-gtf.Tpo $(DEPDIR)/gtf-gtf.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='gtf.c' object='gtf-gtf.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtf_CFLAGS) $(CFLAGS) -c -o gtf-gtf.obj `if test -f 'gtf.c'; then $(CYGPATH_W) 'gtf.c'; else $(CYGPATH_W) '$(srcdir)/gtf.c'; fi`
@@ -551,20 +585,23 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -578,7 +615,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -586,29 +623,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -629,13 +671,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -669,6 +715,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -690,6 +737,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -698,18 +747,28 @@ install-data-am: install-appmanDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -732,7 +791,7 @@ ps-am:
 
 uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
 	clean-generic clean-libtool ctags distclean distclean-compile \
@@ -759,6 +818,7 @@ uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 .man.$(APP_MAN_SUFFIX):
 	-rm -f $@
 	$(LN_S) $< $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/vbe/Makefile.in b/xorg-server/hw/xfree86/vbe/Makefile.in
index 6f935ed10..94377082f 100644
--- a/xorg-server/hw/xfree86/vbe/Makefile.in
+++ b/xorg-server/hw/xfree86/vbe/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(moduledir)" "$(DESTDIR)$(sdkdir)"
-moduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(module_LTLIBRARIES)
 libvbe_la_LIBADD =
 am_libvbe_la_OBJECTS = vbe.lo vbeModes.lo vbe_module.lo
@@ -68,6 +85,7 @@ libvbe_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -76,7 +94,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libvbe_la_SOURCES)
 DIST_SOURCES = $(libvbe_la_SOURCES)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -212,6 +229,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -379,9 +397,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/vbe/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/vbe/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/vbe/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/vbe/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -399,23 +417,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-moduleLTLIBRARIES: $(module_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(moduledir)" || $(MKDIR_P) "$(DESTDIR)$(moduledir)"
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(moduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(moduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(moduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(moduledir)"; \
+	}
 
 uninstall-moduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$p"; \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$f"; \
 	done
 
 clean-moduleLTLIBRARIES:
@@ -441,21 +464,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -468,20 +491,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -495,7 +521,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -503,29 +529,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -546,13 +577,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -583,6 +618,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -604,6 +640,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -612,18 +650,28 @@ install-data-am: install-moduleLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -663,6 +711,7 @@ uninstall-am: uninstall-moduleLTLIBRARIES uninstall-sdkHEADERS
 	tags uninstall uninstall-am uninstall-moduleLTLIBRARIES \
 	uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/vgahw/Makefile.in b/xorg-server/hw/xfree86/vgahw/Makefile.in
index 65a593108..37c6b68f6 100644
--- a/xorg-server/hw/xfree86/vgahw/Makefile.in
+++ b/xorg-server/hw/xfree86/vgahw/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(moduledir)" "$(DESTDIR)$(sdkdir)"
-moduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(module_LTLIBRARIES)
 libvgahw_la_LIBADD =
 am_libvgahw_la_OBJECTS = vgaHW.lo vgaHWmodule.lo
@@ -68,6 +85,7 @@ libvgahw_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -76,7 +94,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libvgahw_la_SOURCES)
 DIST_SOURCES = $(libvgahw_la_SOURCES)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -212,6 +229,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -378,9 +396,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/vgahw/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/vgahw/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/vgahw/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/vgahw/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -398,23 +416,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-moduleLTLIBRARIES: $(module_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(moduledir)" || $(MKDIR_P) "$(DESTDIR)$(moduledir)"
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(moduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(moduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(moduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(moduledir)"; \
+	}
 
 uninstall-moduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$p"; \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$f"; \
 	done
 
 clean-moduleLTLIBRARIES:
@@ -439,21 +462,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -466,20 +489,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -493,7 +519,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -501,29 +527,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -544,13 +575,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -581,6 +616,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -602,6 +638,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -610,18 +648,28 @@ install-data-am: install-moduleLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -661,6 +709,7 @@ uninstall-am: uninstall-moduleLTLIBRARIES uninstall-sdkHEADERS
 	tags uninstall uninstall-am uninstall-moduleLTLIBRARIES \
 	uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/x86emu/Makefile.in b/xorg-server/hw/xfree86/x86emu/Makefile.in
index 064228151..2de47a3c8 100644
--- a/xorg-server/hw/xfree86/x86emu/Makefile.in
+++ b/xorg-server/hw/xfree86/x86emu/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libx86emu_a_AR = $(AR) $(ARFLAGS)
@@ -59,6 +62,7 @@ libx86emu_a_OBJECTS = $(am_libx86emu_a_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -201,6 +205,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -385,9 +390,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/x86emu/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/x86emu/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/x86emu/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/x86emu/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -405,6 +410,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -429,21 +435,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -466,7 +472,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -474,29 +480,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -517,13 +528,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -551,6 +566,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -572,6 +588,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -580,18 +598,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -629,6 +657,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/xaa/Makefile.in b/xorg-server/hw/xfree86/xaa/Makefile.in
index 2dc04250e..e57a4e759 100644
--- a/xorg-server/hw/xfree86/xaa/Makefile.in
+++ b/xorg-server/hw/xfree86/xaa/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(moduledir)" "$(DESTDIR)$(sdkdir)"
-moduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(module_LTLIBRARIES)
 @COMPOSITE_TRUE@libxaa_la_DEPENDENCIES =  \
 @COMPOSITE_TRUE@	$(top_builddir)/miext/cw/libcw.la
@@ -88,6 +105,7 @@ libxaa_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -96,7 +114,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libxaa_la_SOURCES)
 DIST_SOURCES = $(libxaa_la_SOURCES)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -232,6 +249,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -425,9 +443,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/xaa/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/xaa/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/xaa/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/xaa/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -445,23 +463,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-moduleLTLIBRARIES: $(module_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(moduledir)" || $(MKDIR_P) "$(DESTDIR)$(moduledir)"
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(moduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(moduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(moduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(moduledir)"; \
+	}
 
 uninstall-moduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$p"; \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$f"; \
 	done
 
 clean-moduleLTLIBRARIES:
@@ -537,21 +560,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -564,20 +587,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -591,7 +617,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -599,29 +625,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -642,13 +673,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -679,6 +714,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
@@ -701,6 +737,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -709,18 +747,28 @@ install-data-am: install-moduleLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -795,6 +843,7 @@ ${MSB_3_FIXED}:
 	echo "#define TRIPLE_BITS" >> $@
 	echo "#define FIXEDBASE" >> $@
 	echo '#include "$(srcdir)/${@:mf3-%=%}"' >> $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xfree86/xf8_16bpp/Makefile.in b/xorg-server/hw/xfree86/xf8_16bpp/Makefile.in
index 68a62716e..ff09fa56e 100644
--- a/xorg-server/hw/xfree86/xf8_16bpp/Makefile.in
+++ b/xorg-server/hw/xfree86/xf8_16bpp/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,14 +52,29 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(moduledir)" "$(DESTDIR)$(sdkdir)"
-moduleLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(module_LTLIBRARIES)
 libxf8_16bpp_la_LIBADD =
 am_libxf8_16bpp_la_OBJECTS = xf8_16module.lo
@@ -68,6 +85,7 @@ libxf8_16bpp_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -76,7 +94,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libxf8_16bpp_la_SOURCES)
 DIST_SOURCES = $(libxf8_16bpp_la_SOURCES)
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -212,6 +229,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -377,9 +395,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/xf8_16bpp/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xfree86/xf8_16bpp/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xfree86/xf8_16bpp/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xfree86/xf8_16bpp/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -397,23 +415,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-moduleLTLIBRARIES: $(module_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(moduledir)" || $(MKDIR_P) "$(DESTDIR)$(moduledir)"
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(moduledir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(moduleLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(moduledir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(moduledir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(moduledir)"; \
+	}
 
 uninstall-moduleLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(module_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$p"; \
+	@list='$(module_LTLIBRARIES)'; test -n "$(moduledir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(moduledir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(moduledir)/$$f"; \
 	done
 
 clean-moduleLTLIBRARIES:
@@ -437,21 +460,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -464,20 +487,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -491,7 +517,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -499,29 +525,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -542,13 +573,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -579,6 +614,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -600,6 +636,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -608,18 +646,28 @@ install-data-am: install-moduleLTLIBRARIES install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -659,6 +707,7 @@ uninstall-am: uninstall-moduleLTLIBRARIES uninstall-sdkHEADERS
 	tags uninstall uninstall-am uninstall-moduleLTLIBRARIES \
 	uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xnest/Makefile.in b/xorg-server/hw/xnest/Makefile.in
index fc7bbcdfd..a4c90c830 100644
--- a/xorg-server/hw/xnest/Makefile.in
+++ b/xorg-server/hw/xnest/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -22,8 +23,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -56,6 +58,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LIBRARIES = $(noinst_LIBRARIES)
 ARFLAGS = cru
 libfbcmap_a_AR = $(AR) $(ARFLAGS)
@@ -63,7 +66,6 @@ libfbcmap_a_LIBADD =
 am_libfbcmap_a_OBJECTS = libfbcmap_a-fbcmap_mi.$(OBJEXT)
 libfbcmap_a_OBJECTS = $(am_libfbcmap_a_OBJECTS)
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am__objects_1 = Args.$(OBJEXT) Color.$(OBJEXT) Cursor.$(OBJEXT) \
 	Display.$(OBJEXT) Events.$(OBJEXT) Font.$(OBJEXT) GC.$(OBJEXT) \
@@ -81,6 +83,7 @@ Xnest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -94,8 +97,22 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-appmanDATA_INSTALL = $(INSTALL_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 DATA = $(appman_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -231,6 +248,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -499,9 +517,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xnest/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xnest/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xnest/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xnest/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -519,6 +537,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
@@ -529,31 +548,46 @@ libfbcmap.a: $(libfbcmap_a_OBJECTS) $(libfbcmap_a_DEPENDENCIES)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 Xnest$(EXEEXT): $(Xnest_OBJECTS) $(Xnest_DEPENDENCIES) 
 	@rm -f Xnest$(EXEEXT)
 	$(Xnest_LINK) $(Xnest_OBJECTS) $(Xnest_LDADD) $(LIBS)
@@ -587,77 +621,77 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 libfbcmap_a-fbcmap_mi.o: $(top_srcdir)/fb/fbcmap_mi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfbcmap_a_CFLAGS) $(CFLAGS) -MT libfbcmap_a-fbcmap_mi.o -MD -MP -MF $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo -c -o libfbcmap_a-fbcmap_mi.o `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo $(DEPDIR)/libfbcmap_a-fbcmap_mi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo $(DEPDIR)/libfbcmap_a-fbcmap_mi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='libfbcmap_a-fbcmap_mi.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfbcmap_a_CFLAGS) $(CFLAGS) -c -o libfbcmap_a-fbcmap_mi.o `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
 
 libfbcmap_a-fbcmap_mi.obj: $(top_srcdir)/fb/fbcmap_mi.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfbcmap_a_CFLAGS) $(CFLAGS) -MT libfbcmap_a-fbcmap_mi.obj -MD -MP -MF $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo -c -o libfbcmap_a-fbcmap_mi.obj `if test -f '$(top_srcdir)/fb/fbcmap_mi.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap_mi.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap_mi.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo $(DEPDIR)/libfbcmap_a-fbcmap_mi.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfbcmap_a-fbcmap_mi.Tpo $(DEPDIR)/libfbcmap_a-fbcmap_mi.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='libfbcmap_a-fbcmap_mi.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfbcmap_a_CFLAGS) $(CFLAGS) -c -o libfbcmap_a-fbcmap_mi.obj `if test -f '$(top_srcdir)/fb/fbcmap_mi.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap_mi.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap_mi.c'; fi`
 
 dpmsstubs.o: $(top_srcdir)/Xext/dpmsstubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dpmsstubs.o -MD -MP -MF $(DEPDIR)/dpmsstubs.Tpo -c -o dpmsstubs.o `test -f '$(top_srcdir)/Xext/dpmsstubs.c' || echo '$(srcdir)/'`$(top_srcdir)/Xext/dpmsstubs.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dpmsstubs.Tpo $(DEPDIR)/dpmsstubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dpmsstubs.Tpo $(DEPDIR)/dpmsstubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xext/dpmsstubs.c' object='dpmsstubs.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dpmsstubs.o `test -f '$(top_srcdir)/Xext/dpmsstubs.c' || echo '$(srcdir)/'`$(top_srcdir)/Xext/dpmsstubs.c
 
 dpmsstubs.obj: $(top_srcdir)/Xext/dpmsstubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dpmsstubs.obj -MD -MP -MF $(DEPDIR)/dpmsstubs.Tpo -c -o dpmsstubs.obj `if test -f '$(top_srcdir)/Xext/dpmsstubs.c'; then $(CYGPATH_W) '$(top_srcdir)/Xext/dpmsstubs.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xext/dpmsstubs.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/dpmsstubs.Tpo $(DEPDIR)/dpmsstubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dpmsstubs.Tpo $(DEPDIR)/dpmsstubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xext/dpmsstubs.c' object='dpmsstubs.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dpmsstubs.obj `if test -f '$(top_srcdir)/Xext/dpmsstubs.c'; then $(CYGPATH_W) '$(top_srcdir)/Xext/dpmsstubs.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xext/dpmsstubs.c'; fi`
 
 stubs.o: $(top_srcdir)/Xi/stubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stubs.o -MD -MP -MF $(DEPDIR)/stubs.Tpo -c -o stubs.o `test -f '$(top_srcdir)/Xi/stubs.c' || echo '$(srcdir)/'`$(top_srcdir)/Xi/stubs.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/stubs.Tpo $(DEPDIR)/stubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/stubs.Tpo $(DEPDIR)/stubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xi/stubs.c' object='stubs.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stubs.o `test -f '$(top_srcdir)/Xi/stubs.c' || echo '$(srcdir)/'`$(top_srcdir)/Xi/stubs.c
 
 stubs.obj: $(top_srcdir)/Xi/stubs.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT stubs.obj -MD -MP -MF $(DEPDIR)/stubs.Tpo -c -o stubs.obj `if test -f '$(top_srcdir)/Xi/stubs.c'; then $(CYGPATH_W) '$(top_srcdir)/Xi/stubs.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xi/stubs.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/stubs.Tpo $(DEPDIR)/stubs.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/stubs.Tpo $(DEPDIR)/stubs.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/Xi/stubs.c' object='stubs.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o stubs.obj `if test -f '$(top_srcdir)/Xi/stubs.c'; then $(CYGPATH_W) '$(top_srcdir)/Xi/stubs.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/Xi/stubs.c'; fi`
 
 miinitext.o: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.o -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
 
 miinitext.obj: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.obj -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
@@ -670,20 +704,23 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -697,7 +734,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -705,29 +742,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -748,13 +790,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -788,6 +834,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -810,6 +857,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -818,18 +867,28 @@ install-data-am: install-appmanDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -852,7 +911,7 @@ ps-am:
 
 uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
 	clean-generic clean-libtool clean-noinstLIBRARIES ctags \
@@ -882,6 +941,7 @@ uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
 
 relink:
 	rm -f Xnest && $(MAKE) Xnest
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xquartz/GL/Makefile.in b/xorg-server/hw/xquartz/GL/Makefile.in
index d4572abfe..a401c73c2 100644
--- a/xorg-server/hw/xquartz/GL/Makefile.in
+++ b/xorg-server/hw/xquartz/GL/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libCGLCore_la_LIBADD =
 am_libCGLCore_la_OBJECTS = indirect.lo capabilities.lo \
@@ -56,6 +59,7 @@ libCGLCore_la_OBJECTS = $(am_libCGLCore_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -198,6 +202,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -377,9 +382,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xquartz/GL/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xquartz/GL/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xquartz/GL/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xquartz/GL/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -397,6 +402,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -421,21 +427,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -458,7 +464,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -466,29 +472,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -509,13 +520,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -543,6 +558,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -564,6 +580,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -572,18 +590,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -621,6 +649,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xquartz/Makefile.in b/xorg-server/hw/xquartz/Makefile.in
index 6a2dbf41c..639385400 100644
--- a/xorg-server/hw/xquartz/Makefile.in
+++ b/xorg-server/hw/xquartz/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libXquartz_la_LIBADD =
 am_libXquartz_la_OBJECTS = fbcmap_mi.lo miinitext.lo X11Application.lo \
@@ -59,6 +62,7 @@ libXquartz_la_OBJECTS = $(am_libXquartz_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -82,9 +86,37 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -216,6 +248,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -427,9 +460,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xquartz/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xquartz/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xquartz/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xquartz/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -447,6 +480,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -485,56 +519,56 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 fbcmap_mi.lo: $(top_srcdir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbcmap_mi.lo -MD -MP -MF $(DEPDIR)/fbcmap_mi.Tpo -c -o fbcmap_mi.lo `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbcmap_mi.lo -MD -MP -MF $(DEPDIR)/fbcmap_mi.Tpo -c -o fbcmap_mi.lo `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/fbcmap_mi.Tpo $(DEPDIR)/fbcmap_mi.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap_mi.c' object='fbcmap_mi.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbcmap_mi.lo `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbcmap_mi.lo `test -f '$(top_srcdir)/fb/fbcmap_mi.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap_mi.c
 
 miinitext.lo: $(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.lo -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.lo `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.lo -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.lo `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.lo `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.lo `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
 
 .m.o:
 @am__fastdepOBJC_TRUE@	$(OBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepOBJC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepOBJC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepOBJC_FALSE@	$(OBJCCOMPILE) -c -o $@ $<
 
 .m.obj:
 @am__fastdepOBJC_TRUE@	$(OBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepOBJC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepOBJC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepOBJC_FALSE@	$(OBJCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .m.lo:
 @am__fastdepOBJC_TRUE@	$(LTOBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepOBJC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepOBJC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepOBJC_FALSE@	$(LTOBJCCOMPILE) -c -o $@ $<
@@ -569,7 +603,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -603,16 +637,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -627,7 +661,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -639,7 +673,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -648,29 +682,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -691,29 +730,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -743,6 +797,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -764,6 +819,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -772,18 +829,28 @@ install-data-am:
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -806,8 +873,8 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -824,6 +891,7 @@ uninstall-am:
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xquartz/bundle/Makefile.in b/xorg-server/hw/xquartz/bundle/Makefile.in
index dd3b3c066..ca5d994f9 100644
--- a/xorg-server/hw/xquartz/bundle/Makefile.in
+++ b/xorg-server/hw/xquartz/bundle/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -23,8 +24,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -56,6 +58,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -63,9 +66,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(resourcedir)"
-resourceDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(noinst_DATA) $(resource_DATA)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
@@ -199,6 +216,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -454,9 +472,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/cp
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xquartz/bundle/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xquartz/bundle/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xquartz/bundle/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xquartz/bundle/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -474,6 +492,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -483,20 +502,23 @@ clean-libtool:
 install-resourceDATA: $(resource_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(resourcedir)" || $(MKDIR_P) "$(DESTDIR)$(resourcedir)"
-	@list='$(resource_DATA)'; for p in $$list; do \
+	@list='$(resource_DATA)'; test -n "$(resourcedir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(resourceDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(resourcedir)/$$f'"; \
-	  $(resourceDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(resourcedir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(resourcedir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(resourcedir)" || exit $$?; \
 	done
 
 uninstall-resourceDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(resource_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(resourcedir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(resourcedir)/$$f"; \
-	done
+	@list='$(resource_DATA)'; test -n "$(resourcedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(resourcedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(resourcedir)" && rm -f $$files
 tags: TAGS
 TAGS:
 
@@ -520,13 +542,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -558,6 +584,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -576,6 +603,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -583,21 +612,30 @@ info-am:
 install-data-am: install-resourceDATA
 	@$(NORMAL_INSTALL)
 	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -619,7 +657,6 @@ ps-am:
 uninstall-am: uninstall-resourceDATA
 	@$(NORMAL_INSTALL)
 	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
-
 .MAKE: install-am install-data-am install-strip uninstall-am
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
@@ -647,6 +684,7 @@ install-data-hook:
 
 uninstall-hook:
 	$(RM) -rf $(DESTDIR)$(APPLE_APPLICATIONS_DIR)/$(APPLE_APPLICATION_NAME).app	
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xquartz/doc/Makefile.in b/xorg-server/hw/xquartz/doc/Makefile.in
index dcdc5f5f1..7f0cc8d07 100644
--- a/xorg-server/hw/xquartz/doc/Makefile.in
+++ b/xorg-server/hw/xquartz/doc/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -20,8 +21,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -53,6 +55,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -60,9 +63,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(appmandir)"
-appmanDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(appman_DATA)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
@@ -196,6 +213,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -397,9 +415,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xquartz/doc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xquartz/doc/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xquartz/doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xquartz/doc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -417,6 +435,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -426,20 +445,23 @@ clean-libtool:
 install-appmanDATA: $(appman_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
 	done
 
 uninstall-appmanDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+	@list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(appmandir)" && rm -f $$files
 tags: TAGS
 TAGS:
 
@@ -463,13 +485,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -501,6 +527,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -519,6 +546,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -527,18 +556,28 @@ install-data-am: install-appmanDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -582,6 +621,7 @@ uninstall-am: uninstall-appmanDATA
 
 .man.$(APP_MAN_SUFFIX):
 	cp $< $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xquartz/mach-startup/Makefile.in b/xorg-server/hw/xquartz/mach-startup/Makefile.in
index fbdedad9b..20e1243a1 100644
--- a/xorg-server/hw/xquartz/mach-startup/Makefile.in
+++ b/xorg-server/hw/xquartz/mach-startup/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -61,9 +63,8 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(x11appdir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-x11appPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS) $(x11app_PROGRAMS)
 dist_X11_bin_OBJECTS = bundle-main.$(OBJEXT)
 nodist_X11_bin_OBJECTS = mach_startupServer.$(OBJEXT) \
@@ -90,6 +91,7 @@ Xquartz_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -233,6 +235,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -440,9 +443,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xquartz/mach-startup/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xquartz/mach-startup/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xquartz/mach-startup/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xquartz/mach-startup/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -460,62 +463,93 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 install-x11appPROGRAMS: $(x11app_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(x11appdir)" || $(MKDIR_P) "$(DESTDIR)$(x11appdir)"
-	@list='$(x11app_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(x11appPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(x11appdir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(x11appPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(x11appdir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(x11app_PROGRAMS)'; test -n "$(x11appdir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(x11appdir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(x11appdir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-x11appPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(x11app_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(x11appdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(x11appdir)/$$f"; \
-	done
+	@list='$(x11app_PROGRAMS)'; test -n "$(x11appdir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(x11appdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(x11appdir)" && rm -f $$files
 
 clean-x11appPROGRAMS:
-	@list='$(x11app_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(x11app_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 X11.bin$(EXEEXT): $(X11_bin_OBJECTS) $(X11_bin_DEPENDENCIES) 
 	@rm -f X11.bin$(EXEEXT)
 	$(X11_bin_LINK) $(X11_bin_OBJECTS) $(X11_bin_LDADD) $(LIBS)
@@ -537,21 +571,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -574,7 +608,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -582,29 +616,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -625,13 +664,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -665,6 +708,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -687,6 +731,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -695,18 +741,28 @@ install-data-am: install-x11appPROGRAMS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -729,7 +785,7 @@ ps-am:
 
 uninstall-am: uninstall-binPROGRAMS uninstall-x11appPROGRAMS
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
 	clean-generic clean-libtool clean-x11appPROGRAMS ctags \
@@ -749,6 +805,7 @@ uninstall-am: uninstall-binPROGRAMS uninstall-x11appPROGRAMS
 
 $(BUILT_SOURCES): $(srcdir)/mach_startup.defs
 	mig -sheader mach_startupServer.h $(srcdir)/mach_startup.defs
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xquartz/pbproxy/Makefile.in b/xorg-server/hw/xquartz/pbproxy/Makefile.in
index b31445e39..12365fb16 100644
--- a/xorg-server/hw/xquartz/pbproxy/Makefile.in
+++ b/xorg-server/hw/xquartz/pbproxy/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libxpbproxy_la_LIBADD =
 am_libxpbproxy_la_OBJECTS = trick_autotools.lo main.lo x-input.lo \
@@ -59,7 +62,6 @@ libxpbproxy_la_LINK = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	--mode=link $(OBJCLD) $(AM_OBJCFLAGS) $(OBJCFLAGS) \
 	$(libxpbproxy_la_LDFLAGS) $(LDFLAGS) -o $@
 am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am__xpbproxy_SOURCES_DIST = app-main.m
 @STANDALONE_XPBPROXY_TRUE@am_xpbproxy_OBJECTS = app-main.$(OBJEXT)
@@ -68,6 +70,7 @@ xpbproxy_OBJECTS = $(am_xpbproxy_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -216,6 +219,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -391,9 +395,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xquartz/pbproxy/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xquartz/pbproxy/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xquartz/pbproxy/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xquartz/pbproxy/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -411,6 +415,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -425,31 +430,46 @@ libxpbproxy.la: $(libxpbproxy_la_OBJECTS) $(libxpbproxy_la_DEPENDENCIES)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 xpbproxy$(EXEEXT): $(xpbproxy_OBJECTS) $(xpbproxy_DEPENDENCIES) 
 	@rm -f xpbproxy$(EXEEXT)
 	$(OBJCLINK) $(xpbproxy_OBJECTS) $(xpbproxy_LDADD) $(LIBS)
@@ -468,42 +488,42 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 .m.o:
 @am__fastdepOBJC_TRUE@	$(OBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepOBJC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepOBJC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepOBJC_FALSE@	$(OBJCCOMPILE) -c -o $@ $<
 
 .m.obj:
 @am__fastdepOBJC_TRUE@	$(OBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepOBJC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepOBJC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepOBJC_FALSE@	$(OBJCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .m.lo:
 @am__fastdepOBJC_TRUE@	$(LTOBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepOBJC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepOBJC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepOBJC_FALSE@	DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepOBJC_FALSE@	$(LTOBJCCOMPILE) -c -o $@ $<
@@ -526,7 +546,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -534,29 +554,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -577,13 +602,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -614,6 +643,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -635,6 +665,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -643,18 +675,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -693,6 +735,7 @@ uninstall-am: uninstall-binPROGRAMS
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am uninstall-binPROGRAMS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xquartz/xpr/Makefile.in b/xorg-server/hw/xquartz/xpr/Makefile.in
index 11d36bb49..3eaafdd17 100644
--- a/xorg-server/hw/xquartz/xpr/Makefile.in
+++ b/xorg-server/hw/xquartz/xpr/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libXquartzXpr_la_LIBADD =
 am_libXquartzXpr_la_OBJECTS = appledri.lo dri.lo xprAppleWM.lo \
@@ -57,6 +60,7 @@ libXquartzXpr_la_OBJECTS = $(am_libXquartzXpr_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -199,6 +203,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -388,9 +393,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xquartz/xpr/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xquartz/xpr/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xquartz/xpr/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xquartz/xpr/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -408,6 +413,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -439,21 +445,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -476,7 +482,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -484,29 +490,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -527,13 +538,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -561,6 +576,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -582,6 +598,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -590,18 +608,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -639,6 +667,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/hw/xwin/Makefile.in b/xorg-server/hw/xwin/Makefile.in
index c168f5453..8b92bbdc6 100644
--- a/xorg-server/hw/xwin/Makefile.in
+++ b/xorg-server/hw/xwin/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -51,8 +53,8 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am__XWin_SOURCES_DIST = InitInput.c InitOutput.c winallpriv.c \
 	winauth.c winblock.c wincmap.c winconfig.c wincreatewnd.c \
@@ -129,6 +131,7 @@ XWin_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -146,6 +149,27 @@ LTYACCCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	--mode=compile $(YACC) $(YFLAGS) $(AM_YFLAGS)
 SOURCES = $(XWin_SOURCES)
 DIST_SOURCES = $(am__XWin_SOURCES_DIST)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 man1dir = $(mandir)/man1
 NROFF = nroff
 MANS = $(dist_man1_MANS)
@@ -291,6 +315,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -616,9 +641,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xwin/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  hw/xwin/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hw/xwin/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign hw/xwin/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -636,34 +661,50 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 XWin$(EXEEXT): $(XWin_OBJECTS) $(XWin_DEPENDENCIES) 
 	@rm -f XWin$(EXEEXT)
 	$(XWin_LINK) $(XWin_OBJECTS) $(XWin_LDADD) $(LIBS)
@@ -742,49 +783,49 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 miinitext.o: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.o -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.o `test -f '$(top_srcdir)/mi/miinitext.c' || echo '$(srcdir)/'`$(top_srcdir)/mi/miinitext.c
 
 miinitext.obj: $(top_srcdir)/mi/miinitext.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT miinitext.obj -MD -MP -MF $(DEPDIR)/miinitext.Tpo -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/miinitext.Tpo $(DEPDIR)/miinitext.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/mi/miinitext.c' object='miinitext.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o miinitext.obj `if test -f '$(top_srcdir)/mi/miinitext.c'; then $(CYGPATH_W) '$(top_srcdir)/mi/miinitext.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/mi/miinitext.c'; fi`
 
 fbcmap.o: $(top_srcdir)/fb/fbcmap.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbcmap.o -MD -MP -MF $(DEPDIR)/fbcmap.Tpo -c -o fbcmap.o `test -f '$(top_srcdir)/fb/fbcmap.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/fbcmap.Tpo $(DEPDIR)/fbcmap.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/fbcmap.Tpo $(DEPDIR)/fbcmap.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap.c' object='fbcmap.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbcmap.o `test -f '$(top_srcdir)/fb/fbcmap.c' || echo '$(srcdir)/'`$(top_srcdir)/fb/fbcmap.c
 
 fbcmap.obj: $(top_srcdir)/fb/fbcmap.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbcmap.obj -MD -MP -MF $(DEPDIR)/fbcmap.Tpo -c -o fbcmap.obj `if test -f '$(top_srcdir)/fb/fbcmap.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/fbcmap.Tpo $(DEPDIR)/fbcmap.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/fbcmap.Tpo $(DEPDIR)/fbcmap.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$(top_srcdir)/fb/fbcmap.c' object='fbcmap.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbcmap.obj `if test -f '$(top_srcdir)/fb/fbcmap.c'; then $(CYGPATH_W) '$(top_srcdir)/fb/fbcmap.c'; else $(CYGPATH_W) '$(srcdir)/$(top_srcdir)/fb/fbcmap.c'; fi`
@@ -800,51 +841,40 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-install-man1: $(man1_MANS) $(man_MANS)
+install-man1: $(dist_man1_MANS)
 	@$(NORMAL_INSTALL)
 	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
+	@list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
 	done; \
-	for i in $$list; do \
-	  if test -f $$i; then file=$$i; \
-	  else file=$(srcdir)/$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
 uninstall-man1:
 	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-	done
+	@list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	test -z "$$files" || { \
+	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -858,7 +888,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -866,34 +896,52 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -909,13 +957,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -949,6 +1001,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -973,6 +1026,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -981,18 +1036,28 @@ install-data-am: install-man
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man: install-man1
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -1017,7 +1082,7 @@ uninstall-am: uninstall-binPROGRAMS uninstall-man
 
 uninstall-man: uninstall-man1
 
-.MAKE: install-am install-strip
+.MAKE: all check install install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
 	clean-generic clean-libtool ctags distclean distclean-compile \
@@ -1040,6 +1105,7 @@ winprefslex.c: winprefslex.l winprefsyacc.c winprefsyacc.h
 
 relink:
 	rm -f XWin && $(MAKE) XWin
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/include/Makefile.in b/xorg-server/include/Makefile.in
index 4dca0ea13..6aff39ff4 100644
--- a/xorg-server/include/Makefile.in
+++ b/xorg-server/include/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,6 +49,7 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = do-not-use-config.h xorg-server.h dix-config.h \
 	xorg-config.h xkb-config.h xwin-config.h kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -54,9 +57,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)" "$(DESTDIR)$(sdkdir)"
-nodist_sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 am__sdk_HEADERS_DIST = XIstubs.h bstore.h bstorestr.h closestr.h \
 	closure.h colormap.h colormapst.h hotplug.h cursor.h \
 	cursorstr.h dix.h dixaccess.h dixevents.h dixfont.h \
@@ -68,7 +85,6 @@ am__sdk_HEADERS_DIST = XIstubs.h bstore.h bstorestr.h closestr.h \
 	scrnintstr.h selection.h servermd.h site.h swaprep.h swapreq.h \
 	validate.h window.h windowstr.h xkbfile.h xkbsrv.h xkbstr.h \
 	xkbrules.h xserver-properties.h
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(nodist_sdk_HEADERS) $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -204,6 +220,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -426,9 +443,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  include/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  include/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign include/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -446,6 +463,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 do-not-use-config.h: stamp-h1
 	@if test ! -f $@; then \
@@ -457,7 +475,7 @@ stamp-h1: $(srcdir)/do-not-use-config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status include/do-not-use-config.h
 $(srcdir)/do-not-use-config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
 
@@ -532,37 +550,43 @@ clean-libtool:
 install-nodist_sdkHEADERS: $(nodist_sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(nodist_sdk_HEADERS)'; for p in $$list; do \
+	@list='$(nodist_sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(nodist_sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(nodist_sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-nodist_sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(nodist_sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(nodist_sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -576,7 +600,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES) do-not-use-config.h.in xorg-server.h.in dix-config.h.in xorg-config.h.in xkb-config.h.in xwin-config.h.in kdrive-config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) do-not-use-config.h.in xorg-server.h.in dix-config.h.in xorg-config.h.in xkb-config.h.in xwin-config.h.in kdrive-config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -584,29 +608,34 @@ TAGS:  $(HEADERS) $(SOURCES) do-not-use-config.h.in xorg-server.h.in dix-config.
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES) do-not-use-config.h.in xorg-server.h.in dix-config.h.in xorg-config.h.in xkb-config.h.in xwin-config.h.in kdrive-config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS) do-not-use-config.h.in xorg-server.h.in dix-config.h.in xorg-config.h.in xkb-config.h.in xwin-config.h.in kdrive-config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -627,13 +656,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -666,6 +699,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -684,6 +718,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -692,18 +728,28 @@ install-data-am: install-nodist_sdkHEADERS install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -724,7 +770,7 @@ ps-am:
 
 uninstall-am: uninstall-nodist_sdkHEADERS uninstall-sdkHEADERS
 
-.MAKE: install-am install-strip
+.MAKE: all install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libtool ctags distclean distclean-generic distclean-hdr \
@@ -740,6 +786,7 @@ uninstall-am: uninstall-nodist_sdkHEADERS uninstall-sdkHEADERS
 	ps ps-am tags uninstall uninstall-am \
 	uninstall-nodist_sdkHEADERS uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/include/dix.h b/xorg-server/include/dix.h
index 66af953b2..9c2c73fb7 100644
--- a/xorg-server/include/dix.h
+++ b/xorg-server/include/dix.h
@@ -229,6 +229,12 @@ extern void WakeupHandler(
     int /*result*/,
     pointer /*pReadmask*/);
 
+void
+EnableLimitedSchedulingLatency(void);
+
+void
+DisableLimitedSchedulingLatency(void);
+
 typedef void (* WakeupHandlerProcPtr)(
     pointer /* blockData */,
     int /* result */,
diff --git a/xorg-server/include/do-not-use-config.h.in b/xorg-server/include/do-not-use-config.h.in
index 119155671..26b50bcaf 100644
--- a/xorg-server/include/do-not-use-config.h.in
+++ b/xorg-server/include/do-not-use-config.h.in
@@ -433,6 +433,9 @@
 /* Define to the one symbol short name of this package. */
 #undef PACKAGE_TARNAME
 
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
 /* Define to the version of this package. */
 #undef PACKAGE_VERSION
 
diff --git a/xorg-server/include/resource.h b/xorg-server/include/resource.h
index b8105d45a..9b5792e30 100644
--- a/xorg-server/include/resource.h
+++ b/xorg-server/include/resource.h
@@ -218,13 +218,20 @@ extern pointer LookupClientResourceComplex(
     FindComplexResType func,
     pointer cdata);
 
-extern int dixLookupResource(
+extern int dixLookupResourceByType(
     pointer *result,
     XID id,
     RESTYPE rtype,
     ClientPtr client,
     Mask access_mode);
 
+extern int dixLookupResourceByClass(
+    pointer *result,
+    XID id,
+    RESTYPE rclass,
+    ClientPtr client,
+    Mask access_mode);
+
 extern void GetXIDRange(
     int /*client*/,
     Bool /*server*/,
@@ -244,29 +251,42 @@ extern RESTYPE TypeMask;
  * Please use the noted replacements instead.
  */
 
-/* replaced by dixLookupResource */
+#ifdef __GNUC__
+#define X_DEPRECATED __attribute__((deprecated))
+#else
+#define X_DEPRECATED
+#endif
+
+/* replaced by dixLookupResourceByType or dixLookupResourceByClass */
+extern int dixLookupResource(
+    pointer *result,
+    XID id,
+    RESTYPE rtype,
+    ClientPtr client,
+    Mask access_mode) X_DEPRECATED;
+
 extern pointer SecurityLookupIDByType(
     ClientPtr client,
     XID id,
     RESTYPE rtype,
-    Mask access_mode);
+    Mask access_mode) X_DEPRECATED;
 
-/* replaced by dixLookupResource */
+/* replaced by dixLookupResourceByClass */
 extern pointer SecurityLookupIDByClass(
     ClientPtr client,
     XID id,
     RESTYPE classes,
-    Mask access_mode);
+    Mask access_mode) X_DEPRECATED;
 
-/* replaced by dixLookupResource */
+/* replaced by dixLookupResourceByType */
 extern pointer LookupIDByType(
     XID id,
-    RESTYPE rtype);
+    RESTYPE rtype) X_DEPRECATED;
 
-/* replaced by dixLookupResource */
+/* replaced by dixLookupResourceByClass */
 extern pointer LookupIDByClass(
     XID id,
-    RESTYPE classes);
+    RESTYPE classes) X_DEPRECATED;
 
 #endif /* RESOURCE_H */
 
diff --git a/xorg-server/install-sh b/xorg-server/install-sh
index a5897de6e..6781b987b 100644
--- a/xorg-server/install-sh
+++ b/xorg-server/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2006-12-25.00
+scriptversion=2009-04-28.21; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -515,5 +515,6 @@ done
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/xorg-server/mi/Makefile.in b/xorg-server/mi/Makefile.in
index 0c24c1695..4b2cc4ed4 100644
--- a/xorg-server/mi/Makefile.in
+++ b/xorg-server/mi/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libmi_la_LIBADD =
 am_libmi_la_OBJECTS = miarc.lo mibank.lo mibitblt.lo mibstore.lo \
@@ -64,6 +67,7 @@ libmi_la_OBJECTS = $(am_libmi_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -80,9 +84,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -218,6 +236,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -443,9 +462,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  mi/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  mi/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign mi/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign mi/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -463,6 +482,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -520,21 +540,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -547,20 +567,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -574,7 +597,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -582,29 +605,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -625,13 +653,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -662,6 +694,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -683,6 +716,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -691,18 +726,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -741,6 +786,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/miext/Makefile.in b/xorg-server/miext/Makefile.in
index 50eab7d41..8ba8c9eea 100644
--- a/xorg-server/miext/Makefile.in
+++ b/xorg-server/miext/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -49,6 +51,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -60,9 +63,37 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -194,6 +225,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -354,9 +386,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  miext/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  miext/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign miext/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign miext/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -374,6 +406,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -405,7 +438,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -439,16 +472,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -463,7 +496,7 @@ tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -475,7 +508,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -484,29 +517,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -527,29 +565,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -579,6 +632,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -597,6 +651,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -605,18 +661,28 @@ install-data-am:
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -637,8 +703,8 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -654,6 +720,7 @@ uninstall-am:
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/miext/cw/Makefile.in b/xorg-server/miext/cw/Makefile.in
index 9998900b6..c3735b05f 100644
--- a/xorg-server/miext/cw/Makefile.in
+++ b/xorg-server/miext/cw/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libcw_la_LIBADD =
 am_libcw_la_OBJECTS = cw.lo cw_ops.lo cw_render.lo
@@ -55,6 +58,7 @@ libcw_la_OBJECTS = $(am_libcw_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -197,6 +201,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -365,9 +370,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  miext/cw/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  miext/cw/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign miext/cw/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign miext/cw/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -385,6 +390,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -409,21 +415,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -446,7 +452,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -454,29 +460,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -497,13 +508,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -531,6 +546,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -552,6 +568,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -560,18 +578,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -609,6 +637,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/miext/damage/Makefile.in b/xorg-server/miext/damage/Makefile.in
index 795210173..0ee782889 100644
--- a/xorg-server/miext/damage/Makefile.in
+++ b/xorg-server/miext/damage/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libdamage_la_LIBADD =
 am_libdamage_la_OBJECTS = damage.lo
@@ -57,6 +60,7 @@ libdamage_la_OBJECTS = $(am_libdamage_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -71,9 +75,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -209,6 +227,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -377,9 +396,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  miext/damage/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  miext/damage/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign miext/damage/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign miext/damage/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -397,6 +416,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -419,21 +439,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -446,20 +466,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -473,7 +496,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -481,29 +504,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -524,13 +552,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -561,6 +593,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -582,6 +615,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -590,18 +625,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -640,6 +685,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/miext/rootless/Makefile.in b/xorg-server/miext/rootless/Makefile.in
index 8d2b32235..1aeceb545 100644
--- a/xorg-server/miext/rootless/Makefile.in
+++ b/xorg-server/miext/rootless/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 librootless_la_LIBADD =
 am_librootless_la_OBJECTS = rootlessCommon.lo rootlessGC.lo \
@@ -56,6 +59,7 @@ librootless_la_OBJECTS = $(am_librootless_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -198,6 +202,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -374,9 +379,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  miext/rootless/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  miext/rootless/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign miext/rootless/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign miext/rootless/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -394,6 +399,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -420,21 +426,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -457,7 +463,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -465,29 +471,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -508,13 +519,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -542,6 +557,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -563,6 +579,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -571,18 +589,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -620,6 +648,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/miext/shadow/Makefile.in b/xorg-server/miext/shadow/Makefile.in
index 497636c57..6ebea0e82 100644
--- a/xorg-server/miext/shadow/Makefile.in
+++ b/xorg-server/miext/shadow/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libshadow_la_LIBADD =
 am_libshadow_la_OBJECTS = shadow.lo shalloc.lo shpacked.lo \
@@ -62,6 +65,7 @@ libshadow_la_OBJECTS = $(am_libshadow_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -76,9 +80,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -214,6 +232,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -402,9 +421,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  miext/shadow/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  miext/shadow/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign miext/shadow/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign miext/shadow/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -422,6 +441,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -463,21 +483,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -490,20 +510,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -517,7 +540,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -525,29 +548,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -568,13 +596,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -605,6 +637,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -626,6 +659,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -634,18 +669,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -684,6 +729,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/missing b/xorg-server/missing
index 1c8ff7049..28055d2ae 100644
--- a/xorg-server/missing
+++ b/xorg-server/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2006-05-10.23
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-#   Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@ scriptversion=2006-05-10.23
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -89,6 +87,9 @@ Supported PROGRAM values:
   tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
     ;;
@@ -106,15 +107,22 @@ Send bug reports to <bug-automake@gnu.org>."
 
 esac
 
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
-# the program).
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
 case $1 in
-  lex|yacc)
+  lex*|yacc*)
     # Not GNU programs, they don't have --version.
     ;;
 
-  tar)
+  tar*)
     if test -n "$run"; then
        echo 1>&2 "ERROR: \`tar' requires --run"
        exit 1
@@ -138,7 +146,7 @@ esac
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case $1 in
+case $program in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -148,7 +156,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch aclocal.m4
     ;;
 
-  autoconf)
+  autoconf*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
@@ -157,7 +165,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch configure
     ;;
 
-  autoheader)
+  autoheader*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@@ -187,7 +195,7 @@ WARNING: \`$1' is $msg.  You should only need it if
 	   while read f; do touch "$f"; done
     ;;
 
-  autom4te)
+  autom4te*)
     echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
          You might have modified some files without having the
@@ -210,7 +218,7 @@ WARNING: \`$1' is needed, but is $msg.
     fi
     ;;
 
-  bison|yacc)
+  bison*|yacc*)
     echo 1>&2 "\
 WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
@@ -240,7 +248,7 @@ WARNING: \`$1' $msg.  You should only need it if
     fi
     ;;
 
-  lex|flex)
+  lex*|flex*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
@@ -263,7 +271,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     ;;
 
-  help2man)
+  help2man*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
@@ -277,11 +285,11 @@ WARNING: \`$1' is $msg.  You should only need it if
     else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
-	exit 1
+	exit $?
     fi
     ;;
 
-  makeinfo)
+  makeinfo*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -310,7 +318,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch $file
     ;;
 
-  tar)
+  tar*)
     shift
 
     # We have already tried tar in the generic part.
@@ -363,5 +371,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/xorg-server/os/Makefile.in b/xorg-server/os/Makefile.in
index 7451117dd..14ece8f09 100644
--- a/xorg-server/os/Makefile.in
+++ b/xorg-server/os/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -53,6 +55,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libos_la_LIBADD =
 am__libos_la_SOURCES_DIST = WaitFor.c access.c auth.c backtrace.c \
@@ -79,6 +82,7 @@ os_O_LDADD = $(LDADD)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -221,6 +225,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -394,9 +399,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  os/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  os/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign os/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign os/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -414,6 +419,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -427,11 +433,13 @@ libos.la: $(libos_la_OBJECTS) $(libos_la_DEPENDENCIES)
 	$(LINK)  $(libos_la_OBJECTS) $(libos_la_LIBADD) $(LIBS)
 
 clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 @XSERVER_DTRACE_FALSE@os.O$(EXEEXT): $(os_O_OBJECTS) $(os_O_DEPENDENCIES) 
 @XSERVER_DTRACE_FALSE@	@rm -f os.O$(EXEEXT)
 @XSERVER_DTRACE_FALSE@	$(LINK) $(os_O_OBJECTS) $(os_O_LDADD) $(LIBS)
@@ -466,21 +474,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -503,7 +511,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -511,29 +519,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -554,13 +567,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -589,6 +606,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -610,6 +628,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -618,18 +638,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -678,6 +708,7 @@ uninstall-am:
 
 os.c:
 	touch $@
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/os/xdmcp.c b/xorg-server/os/xdmcp.c
index 736cd3e11..746f5985c 100644
--- a/xorg-server/os/xdmcp.c
+++ b/xorg-server/os/xdmcp.c
@@ -491,7 +491,9 @@ XdmcpRegisterConnection (
 	    return;
 	}
     }
-    newAddress = (CARD8 *) xalloc (addrlen * sizeof (CARD8));
+    if (ConnectionAddresses.length + 1 == 256)
+	return;
+    newAddress = xalloc (addrlen * sizeof (CARD8));
     if (!newAddress)
 	return;
     if (!XdmcpReallocARRAY16 (&ConnectionTypes, ConnectionTypes.length + 1))
diff --git a/xorg-server/randr/Makefile.in b/xorg-server/randr/Makefile.in
index 74f4fd2cc..97313124a 100644
--- a/xorg-server/randr/Makefile.in
+++ b/xorg-server/randr/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -51,6 +53,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 librandr_la_LIBADD =
 am__librandr_la_SOURCES_DIST = mirandr.c randr.c randrstr.h rrcrtc.c \
@@ -66,6 +69,7 @@ librandr_la_OBJECTS = $(am_librandr_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -80,9 +84,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -218,6 +236,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -385,9 +404,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  randr/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  randr/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign randr/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign randr/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -405,6 +424,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -439,21 +459,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -466,20 +486,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -493,7 +516,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -501,29 +524,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -544,13 +572,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -581,6 +613,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -602,6 +635,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -610,18 +645,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -660,6 +705,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/randr/rrscreen.c b/xorg-server/randr/rrscreen.c
index 4c7d35678..dceb32f2e 100644
--- a/xorg-server/randr/rrscreen.c
+++ b/xorg-server/randr/rrscreen.c
@@ -669,8 +669,9 @@ ProcRRGetScreenInfo (ClientPtr client)
 	rep.sizeID = pData->size;
 	rep.rate = pData->refresh;
 
-	extraLen = (rep.nSizes * sizeof (xScreenSizes) +
-		    rep.nrateEnts * sizeof (CARD16));
+	extraLen = rep.nSizes * sizeof (xScreenSizes);
+	if (has_rate)
+		extraLen += rep.nrateEnts * sizeof (CARD16);
 
 	if (extraLen)
 	{
diff --git a/xorg-server/randr/rrtransform.c b/xorg-server/randr/rrtransform.c
index 8bdff5ab6..06f62984d 100644
--- a/xorg-server/randr/rrtransform.c
+++ b/xorg-server/randr/rrtransform.c
@@ -251,10 +251,10 @@ RRTransformCompute (int			    x,
 #ifdef RANDR_12_INTERFACE
     if (rr_transform)
     {
-        if (!pixman_transform_multiply (transform, transform, &rr_transform->transform))
+        if (!pixman_transform_multiply (transform, &rr_transform->transform, transform))
 	    overflow = TRUE;
-	pixman_f_transform_multiply (f_transform, f_transform, &rr_transform->f_transform);
-	pixman_f_transform_multiply (f_inverse, &rr_transform->f_inverse, f_inverse);
+	pixman_f_transform_multiply (f_transform, &rr_transform->f_transform, f_transform);
+	pixman_f_transform_multiply (f_inverse, f_inverse, &rr_transform->f_inverse);
     }
 #endif
     /*
diff --git a/xorg-server/record/Makefile.in b/xorg-server/record/Makefile.in
index 908952c92..8d4b8dc44 100644
--- a/xorg-server/record/Makefile.in
+++ b/xorg-server/record/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 librecord_la_LIBADD =
 am_librecord_la_OBJECTS = record.lo set.lo
@@ -55,6 +58,7 @@ librecord_la_OBJECTS = $(am_librecord_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -197,6 +201,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -360,9 +365,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  record/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  record/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign record/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign record/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -380,6 +385,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -403,21 +409,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -440,7 +446,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -448,29 +454,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -491,13 +502,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -525,6 +540,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -546,6 +562,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -554,18 +572,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -603,6 +631,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/render/Makefile.in b/xorg-server/render/Makefile.in
index 68f988079..59e271678 100644
--- a/xorg-server/render/Makefile.in
+++ b/xorg-server/render/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 librender_la_LIBADD =
 am_librender_la_OBJECTS = animcur.lo filter.lo glyph.lo matrix.lo \
@@ -59,6 +62,7 @@ librender_la_OBJECTS = $(am_librender_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -74,9 +78,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(sdkdir)"
-sdkHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(sdk_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -212,6 +230,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -388,9 +407,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  render/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  render/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign render/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign render/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -408,6 +427,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -441,21 +461,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -468,20 +488,23 @@ clean-libtool:
 install-sdkHEADERS: $(sdk_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(sdkdir)" || $(MKDIR_P) "$(DESTDIR)$(sdkdir)"
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(sdkHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  $(sdkHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(sdkdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sdkdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(sdkdir)" || exit $$?; \
 	done
 
 uninstall-sdkHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sdk_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sdkdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sdkdir)/$$f"; \
-	done
+	@list='$(sdk_HEADERS)'; test -n "$(sdkdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sdkdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sdkdir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -495,7 +518,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -503,29 +526,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -546,13 +574,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -583,6 +615,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -604,6 +637,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -612,18 +647,28 @@ install-data-am: install-sdkHEADERS
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -662,6 +707,7 @@ uninstall-am: uninstall-sdkHEADERS
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-sdkHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/render/picture.c b/xorg-server/render/picture.c
index d672ebc8c..956738734 100644
--- a/xorg-server/render/picture.c
+++ b/xorg-server/render/picture.c
@@ -1070,7 +1070,7 @@ ChangePicture (PicturePtr	pPicture,
 			pAlpha = 0;
 		    else
 		    {
-			error = dixLookupResource((pointer *)&pAlpha, pid,
+			error = dixLookupResourceByType((pointer *)&pAlpha, pid,
 						  PictureType, client,
 						  DixReadAccess);
 			if (error != Success)
@@ -1131,7 +1131,7 @@ ChangePicture (PicturePtr	pPicture,
 		    else
 		    {
 			clipType = CT_PIXMAP;
-			error = dixLookupResource((pointer *)&pPixmap, pid,
+			error = dixLookupResourceByType((pointer *)&pPixmap, pid,
 						  RT_PIXMAP, client,
 						  DixReadAccess);
 			if (error != Success)
diff --git a/xorg-server/render/render.c b/xorg-server/render/render.c
index 7cb93bd18..e3d76d2c1 100644
--- a/xorg-server/render/render.c
+++ b/xorg-server/render/render.c
@@ -1009,7 +1009,7 @@ ProcRenderReferenceGlyphSet (ClientPtr client)
 
     LEGAL_NEW_RESOURCE(stuff->gsid, client);
 
-    rc = dixLookupResource((pointer *)&glyphSet, stuff->existing, GlyphSetType,
+    rc = dixLookupResourceByType((pointer *)&glyphSet, stuff->existing, GlyphSetType,
 			   client, DixGetAttrAccess);
     if (rc != Success)
     {
@@ -1033,7 +1033,7 @@ ProcRenderFreeGlyphSet (ClientPtr client)
     REQUEST(xRenderFreeGlyphSetReq);
 
     REQUEST_SIZE_MATCH(xRenderFreeGlyphSetReq);
-    rc = dixLookupResource((pointer *)&glyphSet, stuff->glyphset, GlyphSetType,
+    rc = dixLookupResourceByType((pointer *)&glyphSet, stuff->glyphset, GlyphSetType,
 			   client, DixDestroyAccess);
     if (rc != Success)
     {
@@ -1072,7 +1072,7 @@ ProcRenderAddGlyphs (ClientPtr client)
     CARD32	    component_alpha;
 
     REQUEST_AT_LEAST_SIZE(xRenderAddGlyphsReq);
-    err = dixLookupResource((pointer *)&glyphSet, stuff->glyphset, GlyphSetType,
+    err = dixLookupResourceByType((pointer *)&glyphSet, stuff->glyphset, GlyphSetType,
 			    client, DixAddAccess);
     if (err != Success)
     {
@@ -1262,7 +1262,7 @@ ProcRenderFreeGlyphs (ClientPtr client)
     CARD32	    glyph;
 
     REQUEST_AT_LEAST_SIZE(xRenderFreeGlyphsReq);
-    rc = dixLookupResource((pointer *)&glyphSet, stuff->glyphset, GlyphSetType,
+    rc = dixLookupResourceByType((pointer *)&glyphSet, stuff->glyphset, GlyphSetType,
 			   client, DixRemoveAccess);
     if (rc != Success)
     {
diff --git a/xorg-server/xfixes/Makefile.in b/xorg-server/xfixes/Makefile.in
index 4a14f5cb5..9d1c5f6d3 100644
--- a/xorg-server/xfixes/Makefile.in
+++ b/xorg-server/xfixes/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libxfixes_la_LIBADD =
 am_libxfixes_la_OBJECTS = cursor.lo region.lo saveset.lo select.lo \
@@ -56,6 +59,7 @@ libxfixes_la_OBJECTS = $(am_libxfixes_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -198,6 +202,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -368,9 +373,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  xfixes/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  xfixes/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign xfixes/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign xfixes/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -388,6 +393,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -414,21 +420,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -451,7 +457,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -459,29 +465,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -502,13 +513,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -536,6 +551,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -557,6 +573,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -565,18 +583,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -614,6 +642,7 @@ uninstall-am:
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/xfixes/cursor.c b/xorg-server/xfixes/cursor.c
index 15e0948bb..fc83f0a4b 100644
--- a/xorg-server/xfixes/cursor.c
+++ b/xorg-server/xfixes/cursor.c
@@ -865,7 +865,7 @@ ProcXFixesHideCursor (ClientPtr client)
 
     REQUEST_SIZE_MATCH (xXFixesHideCursorReq);
 
-    ret = dixLookupResource((pointer *)&pWin, stuff->window, RT_WINDOW,
+    ret = dixLookupResourceByType((pointer *)&pWin, stuff->window, RT_WINDOW,
 			    client, DixGetAttrAccess);
     if (ret != Success) {
 	client->errorValue = stuff->window;
@@ -923,7 +923,7 @@ ProcXFixesShowCursor (ClientPtr client)
 
     REQUEST_SIZE_MATCH (xXFixesShowCursorReq);
 
-    rc = dixLookupResource((pointer *)&pWin, stuff->window, RT_WINDOW,
+    rc = dixLookupResourceByType((pointer *)&pWin, stuff->window, RT_WINDOW,
 			   client, DixGetAttrAccess);
     if (rc != Success) {
 	client->errorValue = stuff->window;
diff --git a/xorg-server/xfixes/region.c b/xorg-server/xfixes/region.c
index cac24b5da..2ab98fcef 100644
--- a/xorg-server/xfixes/region.c
+++ b/xorg-server/xfixes/region.c
@@ -115,7 +115,7 @@ ProcXFixesCreateRegionFromBitmap (ClientPtr client)
     REQUEST_SIZE_MATCH (xXFixesCreateRegionFromBitmapReq);
     LEGAL_NEW_RESOURCE (stuff->region, client);
 
-    rc = dixLookupResource((pointer *)&pPixmap, stuff->bitmap, RT_PIXMAP,
+    rc = dixLookupResourceByType((pointer *)&pPixmap, stuff->bitmap, RT_PIXMAP,
 			   client, DixReadAccess);
     if (rc != Success)
     {
@@ -160,7 +160,7 @@ ProcXFixesCreateRegionFromWindow (ClientPtr client)
     
     REQUEST_SIZE_MATCH (xXFixesCreateRegionFromWindowReq);
     LEGAL_NEW_RESOURCE (stuff->region, client);
-    rc = dixLookupResource((pointer *)&pWin, stuff->window, RT_WINDOW,
+    rc = dixLookupResourceByType((pointer *)&pWin, stuff->window, RT_WINDOW,
 			   client, DixGetAttrAccess);
     if (rc != Success)
     {
@@ -682,7 +682,7 @@ ProcXFixesSetWindowShapeRegion (ClientPtr client)
     REQUEST(xXFixesSetWindowShapeRegionReq);
 
     REQUEST_SIZE_MATCH(xXFixesSetWindowShapeRegionReq);
-    rc = dixLookupResource((pointer *)&pWin, stuff->dest, RT_WINDOW,
+    rc = dixLookupResourceByType((pointer *)&pWin, stuff->dest, RT_WINDOW,
 			   client, DixSetAttrAccess);
     if (rc != Success)
     {
diff --git a/xorg-server/xkb/Makefile.in b/xorg-server/xkb/Makefile.in
index b05c6801c..53abf0be8 100644
--- a/xorg-server/xkb/Makefile.in
+++ b/xorg-server/xkb/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -50,6 +52,7 @@ CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xwin-config.h \
 	$(top_builddir)/include/kdrive-config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libxkb_la_LIBADD =
 am__objects_1 = ddxBeep.lo ddxCtrls.lo ddxFakeMtn.lo ddxInit.lo \
@@ -68,6 +71,7 @@ libxkbstubs_la_OBJECTS = $(am_libxkbstubs_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
@@ -81,9 +85,23 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(xkbcompileddir)"
-dist_xkbcompiledDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_xkbcompiled_DATA)
 ETAGS = etags
 CTAGS = ctags
@@ -219,6 +237,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
@@ -429,9 +448,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  xkb/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  xkb/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign xkb/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign xkb/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -449,6 +468,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -502,21 +522,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -529,20 +549,23 @@ clean-libtool:
 install-dist_xkbcompiledDATA: $(dist_xkbcompiled_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(xkbcompileddir)" || $(MKDIR_P) "$(DESTDIR)$(xkbcompileddir)"
-	@list='$(dist_xkbcompiled_DATA)'; for p in $$list; do \
+	@list='$(dist_xkbcompiled_DATA)'; test -n "$(xkbcompileddir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(dist_xkbcompiledDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(xkbcompileddir)/$$f'"; \
-	  $(dist_xkbcompiledDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(xkbcompileddir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xkbcompileddir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(xkbcompileddir)" || exit $$?; \
 	done
 
 uninstall-dist_xkbcompiledDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(dist_xkbcompiled_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(xkbcompileddir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(xkbcompileddir)/$$f"; \
-	done
+	@list='$(dist_xkbcompiled_DATA)'; test -n "$(xkbcompileddir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(xkbcompileddir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(xkbcompileddir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -556,7 +579,7 @@ tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -564,29 +587,34 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -607,13 +635,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -644,6 +676,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -665,6 +698,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -673,18 +708,28 @@ install-data-am: install-dist_xkbcompiledDATA
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -723,6 +768,7 @@ uninstall-am: uninstall-dist_xkbcompiledDATA
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am uninstall-dist_xkbcompiledDATA
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/xorg-server/ylwrap b/xorg-server/ylwrap
index 7278b6a35..84d563405 100644
--- a/xorg-server/ylwrap
+++ b/xorg-server/ylwrap
@@ -1,10 +1,10 @@
 #! /bin/sh
 # ylwrap - wrapper for lex/yacc invocations.
 
-scriptversion=2007-11-22.22
+scriptversion=2009-04-28.21; # UTC
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005,
-# 2007  Free Software Foundation, Inc.
+# 2007, 2009 Free Software Foundation, Inc.
 #
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
@@ -19,9 +19,7 @@ scriptversion=2007-11-22.22
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -219,5 +217,6 @@ exit $ret
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End: