aboutsummaryrefslogtreecommitdiff
path: root/X11/xtrans
diff options
context:
space:
mode:
Diffstat (limited to 'X11/xtrans')
-rw-r--r--X11/xtrans/ChangeLog73
-rw-r--r--X11/xtrans/INSTALL110
-rw-r--r--X11/xtrans/Makefile.am46
-rw-r--r--X11/xtrans/Makefile.in338
-rw-r--r--X11/xtrans/Xtrans.mm789
-rw-r--r--X11/xtrans/Xtranssock.c78
-rw-r--r--X11/xtrans/aclocal.m4964
-rw-r--r--X11/xtrans/config.guess1561
-rw-r--r--X11/xtrans/config.sub1686
-rw-r--r--X11/xtrans/configure3591
-rw-r--r--X11/xtrans/configure.ac27
-rw-r--r--X11/xtrans/install-sh231
-rw-r--r--X11/xtrans/missing49
-rw-r--r--X11/xtrans/xtrans.m44
14 files changed, 7629 insertions, 1918 deletions
diff --git a/X11/xtrans/ChangeLog b/X11/xtrans/ChangeLog
index 1305d27b8..9b32e5219 100644
--- a/X11/xtrans/ChangeLog
+++ b/X11/xtrans/ChangeLog
@@ -1,3 +1,76 @@
+commit 1127b8ec766ed8c48cc49b0779647fb697a07ebd
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date: Sat Oct 17 13:14:03 2009 -0700
+
+ xtrans 1.2.5
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 628b125ff9c72ec93090005b06228690f0dd6004
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date: Sat Oct 17 13:06:26 2009 -0700
+
+ Move Xtrans interface docs from xorg-docs module
+
+ Only built/installed if --enable-docs is requested, since few people should
+ be writing code using xtrans interfaces directly.
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 3b0fc7a5a6d4b4b6903a9ad6685e2441f9fe83a7
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date: Thu Oct 15 17:07:10 2009 -0700
+
+ Migrate to xorg macros 1.3 & XORG_DEFAULT_OPTIONS
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 69334376346a96beb3df120a3eeeb7935923c388
+Author: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
+Date: Thu Oct 15 15:25:58 2009 -0500
+
+ Silence root ownership warnings on Cygwin
+
+ XWin need not be run as root, nor do Administrators have uid of 0.
+
+ Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
+
+commit d009d995d85dc499dc3f1add34da551fdf703b60
+Author: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
+Date: Thu Oct 15 15:25:57 2009 -0500
+
+ Don't use -lws2_32 on Cygwin
+
+ On Cygwin, both the (builtin) *NIX socket API and WinSock (via w32api) are
+ available, but they cannot be mixed. We use *NIX APIs for everything else,
+ so we do not want to mix in WinSock here.
+
+ Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
+
+commit 773478581913bafa5e98a7bff3260efb0c4f2ab6
+Author: Mikhail Gusarov <dottedmag@dottedmag.net>
+Date: Sat Sep 26 04:39:20 2009 +0700
+
+ Move xtrans.pc to /usr/share/pkg-config
+
+ This fixes configuration in cross-compilation mode:
+ pkg-config does not look for .pc in /usr/lib/pkg-config during
+ cross-compilation to avoid picking up wrong libraries.
+
+ Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
+ Acked-by: Julien Cristau <jcristau@debian.org>
+
+commit 336d4cfb58c784a81beca74fe03a0af0abb224ba
+Author: Julien Cristau <jcristau@debian.org>
+Date: Fri Aug 7 16:58:58 2009 +0200
+
+ Xtranssock: assume that we have getaddrinfo if ipv6 is enabled
+
+ If IPv6 is enabled at build time, assume that the C library will have
+ getaddrinfo at runtime.
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
commit 4f82ca502d8ec33b0038700675d54539d85d723c
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date: Fri Jul 31 17:24:25 2009 -0700
diff --git a/X11/xtrans/INSTALL b/X11/xtrans/INSTALL
index 5458714e1..2550dab75 100644
--- a/X11/xtrans/INSTALL
+++ b/X11/xtrans/INSTALL
@@ -2,15 +2,15 @@ Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006 Free Software Foundation, Inc.
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-This file is free documentation; the Free Software Foundation gives
+ This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
-Briefly, the shell commands `./configure; make; make install' should
+ Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
@@ -67,12 +67,15 @@ The simplest way to compile this package is:
all sorts of other programs in order to regenerate files that came
with the distribution.
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
+
Compilers and Options
=====================
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
@@ -85,7 +88,7 @@ is an example:
Compiling For Multiple Architectures
====================================
-You can compile the package for more than one kind of computer at the
+ You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
@@ -97,10 +100,24 @@ architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
Installation Names
==================
-By default, `make install' installs the package's commands under
+ By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
@@ -123,7 +140,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
-Some packages pay attention to `--enable-FEATURE' options to
+ Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -135,14 +152,46 @@ find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
Specifying the System Type
==========================
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -150,7 +199,8 @@ type, such as `sun4', or a canonical name which has the form:
where SYSTEM can have one of these forms:
- OS KERNEL-OS
+ OS
+ KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
@@ -168,9 +218,9 @@ eventually be run) with `--host=TYPE'.
Sharing Defaults
================
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -179,7 +229,7 @@ A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
-Variables not defined in a site shell script can be set in the
+ Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -198,11 +248,19 @@ an Autoconf bug. Until the bug is fixed you can use this workaround:
`configure' Invocation
======================
-`configure' recognizes the following options to control how it operates.
+ `configure' recognizes the following options to control how it
+operates.
`--help'
`-h'
- Print a summary of the options to `configure', and exit.
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
`--version'
`-V'
@@ -229,6 +287,16 @@ an Autoconf bug. Until the bug is fixed you can use this workaround:
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
diff --git a/X11/xtrans/Makefile.am b/X11/xtrans/Makefile.am
index f30b57ac9..fa6ef1515 100644
--- a/X11/xtrans/Makefile.am
+++ b/X11/xtrans/Makefile.am
@@ -12,10 +12,10 @@ Xtransinclude_HEADERS = \
aclocaldir = $(datadir)/aclocal
aclocal_DATA = xtrans.m4
-pkgconfigdir = $(libdir)/pkgconfig
+pkgconfigdir = $(datadir)/pkgconfig
pkgconfig_DATA = xtrans.pc
-EXTRA_DIST = xtrans.pc.in ${aclocal_DATA} ChangeLog
+EXTRA_DIST = xtrans.pc.in ${aclocal_DATA} ChangeLog Xtrans.mm
MAINTAINERCLEANFILES = ChangeLog
@@ -25,3 +25,45 @@ ChangeLog:
$(CHANGELOG_CMD)
dist-hook: ChangeLog
+
+# Rules to convert documentation from troff to other formats
+doc_sources = Xtrans.mm
+
+if HAVE_PS2PDF
+printable_format = .pdf
+else
+printable_format = .ps
+endif
+
+if BUILD_DOCS
+doc_DATA = $(doc_sources:.mm=.txt) \
+ $(doc_sources:.mm=$(printable_format)) \
+ $(doc_sources:.mm=.html)
+
+CLEANFILES = $(doc_DATA)
+MOSTLYCLEANFILES = index.*
+
+# Pass version string as a troff string for substitution
+GROFF_DEFS = -dxV="$(PACKAGE_STRING)"
+
+# -t to run through tbl
+GROFF_FLAGS = -t -mm $(GROFF_DEFS)
+
+SUFFIXES = .mm .ps .txt .html .pdf
+
+.mm.ps:
+ -$(AM_V_GEN) $(GROFF) -Tps $(GROFF_FLAGS) $< 2> index.$@.raw > $@
+ @if grep '^[^1-9.]' index.$@.raw | grep -v warning; then exit 1; \
+ else test $$? -le 1; fi
+
+.mm.txt:
+ $(AM_V_GEN) env GROFF_NO_SGR=TRUE $(GROFF) -Tutf8 $(GROFF_FLAGS) \
+ $< 2> index.$@.raw > $@
+
+.mm.html:
+ $(AM_V_GEN) $(GROFF) -Thtml $(GROFF_FLAGS) $< 2> index.$@.raw > $@
+
+.ps.pdf:
+ $(AM_V_GEN) $(PS2PDF) $< $@
+
+endif BUILD_DOCS
diff --git a/X11/xtrans/Makefile.in b/X11/xtrans/Makefile.in
index 35a25134f..04324adbe 100644
--- a/X11/xtrans/Makefile.in
+++ b/X11/xtrans/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -31,11 +33,14 @@ POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
subdir = .
DIST_COMMON = README $(Xtransinclude_HEADERS) $(am__configure_deps) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/xtrans.pc.in $(top_srcdir)/configure AUTHORS COPYING \
- ChangeLog INSTALL NEWS install-sh missing
+ ChangeLog INSTALL NEWS config.guess config.sub install-sh \
+ missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -44,6 +49,13 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = xtrans.pc
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo " GEN " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -51,13 +63,25 @@ am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(aclocaldir)" \
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(docdir)" \
"$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(Xtransincludedir)"
-aclocalDATA_INSTALL = $(INSTALL_DATA)
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(aclocal_DATA) $(pkgconfig_DATA)
-XtransincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+DATA = $(aclocal_DATA) $(doc_DATA) $(pkgconfig_DATA)
HEADERS = $(Xtransinclude_HEADERS)
ETAGS = etags
CTAGS = ctags
@@ -65,14 +89,19 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
+ { test ! -d "$(distdir)" \
+ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr "$(distdir)"; }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
+ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
+ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APP_MAN_DIR = @APP_MAN_DIR@
+APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -81,14 +110,23 @@ CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CHANGELOG_CMD = @CHANGELOG_CMD@
+CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+CWARNFLAGS = @CWARNFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
+DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
+EGREP = @EGREP@
EXEEXT = @EXEEXT@
+FILE_MAN_DIR = @FILE_MAN_DIR@
+FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+GREP = @GREP@
+GROFF = @GROFF@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -97,9 +135,13 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
+LIB_MAN_DIR = @LIB_MAN_DIR@
+LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MISC_MAN_DIR = @MISC_MAN_DIR@
+MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
@@ -109,6 +151,7 @@ PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PS2PDF = @PS2PDF@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
@@ -124,7 +167,11 @@ am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
+build = @build@
build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
@@ -133,7 +180,11 @@ docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
fchown_define = @fchown_define@
+host = @host@
host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
@@ -155,6 +206,7 @@ srcdir = @srcdir@
sticky_bit_define = @sticky_bit_define@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
Xtransincludedir = $(includedir)/X11/Xtrans
@@ -170,28 +222,47 @@ Xtransinclude_HEADERS = \
aclocaldir = $(datadir)/aclocal
aclocal_DATA = xtrans.m4
-pkgconfigdir = $(libdir)/pkgconfig
+pkgconfigdir = $(datadir)/pkgconfig
pkgconfig_DATA = xtrans.pc
-EXTRA_DIST = xtrans.pc.in ${aclocal_DATA} ChangeLog
+EXTRA_DIST = xtrans.pc.in ${aclocal_DATA} ChangeLog Xtrans.mm
MAINTAINERCLEANFILES = ChangeLog
+
+# Rules to convert documentation from troff to other formats
+doc_sources = Xtrans.mm
+@HAVE_PS2PDF_FALSE@printable_format = .ps
+@HAVE_PS2PDF_TRUE@printable_format = .pdf
+@BUILD_DOCS_TRUE@doc_DATA = $(doc_sources:.mm=.txt) \
+@BUILD_DOCS_TRUE@ $(doc_sources:.mm=$(printable_format)) \
+@BUILD_DOCS_TRUE@ $(doc_sources:.mm=.html)
+
+@BUILD_DOCS_TRUE@CLEANFILES = $(doc_DATA)
+@BUILD_DOCS_TRUE@MOSTLYCLEANFILES = index.*
+
+# Pass version string as a troff string for substitution
+@BUILD_DOCS_TRUE@GROFF_DEFS = -dxV="$(PACKAGE_STRING)"
+
+# -t to run through tbl
+@BUILD_DOCS_TRUE@GROFF_FLAGS = -t -mm $(GROFF_DEFS)
+@BUILD_DOCS_TRUE@SUFFIXES = .mm .ps .txt .html .pdf
all: all-am
.SUFFIXES:
+.SUFFIXES: .mm .ps .txt .html .pdf
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
- cd $(srcdir) && $(AUTOMAKE) --gnu \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -207,114 +278,148 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
xtrans.pc: $(top_builddir)/config.status $(srcdir)/xtrans.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-aclocalDATA: $(aclocal_DATA)
@$(NORMAL_INSTALL)
test -z "$(aclocaldir)" || $(MKDIR_P) "$(DESTDIR)$(aclocaldir)"
- @list='$(aclocal_DATA)'; for p in $$list; do \
+ @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
+ for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(aclocalDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(aclocaldir)/$$f'"; \
- $(aclocalDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(aclocaldir)/$$f"; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \
done
uninstall-aclocalDATA:
@$(NORMAL_UNINSTALL)
- @list='$(aclocal_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(aclocaldir)/$$f'"; \
- rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \
+ @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(aclocaldir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(aclocaldir)" && rm -f $$files
+install-docDATA: $(doc_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
+ @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
done
+
+uninstall-docDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(docdir)" && rm -f $$files
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
- @list='$(pkgconfig_DATA)'; for p in $$list; do \
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
- $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
- @list='$(pkgconfig_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
- done
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
install-XtransincludeHEADERS: $(Xtransinclude_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(Xtransincludedir)" || $(MKDIR_P) "$(DESTDIR)$(Xtransincludedir)"
- @list='$(Xtransinclude_HEADERS)'; for p in $$list; do \
+ @list='$(Xtransinclude_HEADERS)'; test -n "$(Xtransincludedir)" || list=; \
+ for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(XtransincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(Xtransincludedir)/$$f'"; \
- $(XtransincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(Xtransincludedir)/$$f"; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(Xtransincludedir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(Xtransincludedir)" || exit $$?; \
done
uninstall-XtransincludeHEADERS:
@$(NORMAL_UNINSTALL)
- @list='$(Xtransinclude_HEADERS)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(Xtransincludedir)/$$f'"; \
- rm -f "$(DESTDIR)$(Xtransincludedir)/$$f"; \
- done
+ @list='$(Xtransinclude_HEADERS)'; test -n "$(Xtransincludedir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(Xtransincludedir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(Xtransincludedir)" && rm -f $$files
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -330,24 +435,29 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
+ || chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
@@ -355,6 +465,14 @@ dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
+dist-lzma: distdir
+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+ $(am__remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+ $(am__remove_distdir)
+
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
@@ -382,6 +500,10 @@ distcheck: dist
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lzma*) \
+ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
@@ -393,9 +515,11 @@ distcheck: dist
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
@@ -417,13 +541,15 @@ distcheck: dist
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
+ @$(am__cd) '$(distuninstallcheck_dir)' \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
@@ -444,7 +570,7 @@ check-am: all-am
check: check-am
all-am: Makefile $(DATA) $(HEADERS)
installdirs:
- for dir in "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(Xtransincludedir)"; do \
+ for dir in "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(Xtransincludedir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
@@ -462,11 +588,14 @@ install-strip:
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -487,27 +616,39 @@ dvi-am:
html: html-am
+html-am:
+
info: info-am
info-am:
install-data-am: install-XtransincludeHEADERS install-aclocalDATA \
- install-pkgconfigDATA
+ install-docDATA install-pkgconfigDATA
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am:
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man:
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -529,25 +670,26 @@ ps: ps-am
ps-am:
uninstall-am: uninstall-XtransincludeHEADERS uninstall-aclocalDATA \
- uninstall-pkgconfigDATA
+ uninstall-docDATA uninstall-pkgconfigDATA
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
clean-generic ctags dist dist-all dist-bzip2 dist-gzip \
- dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
- distclean-generic distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-XtransincludeHEADERS install-aclocalDATA \
- install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-pkgconfigDATA install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
- uninstall uninstall-XtransincludeHEADERS uninstall-aclocalDATA \
- uninstall-am uninstall-pkgconfigDATA
+ dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+ distcheck distclean distclean-generic distclean-tags \
+ distcleancheck distdir distuninstallcheck dvi dvi-am html \
+ html-am info info-am install install-XtransincludeHEADERS \
+ install-aclocalDATA install-am install-data install-data-am \
+ install-docDATA install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-pkgconfigDATA install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags uninstall uninstall-XtransincludeHEADERS \
+ uninstall-aclocalDATA uninstall-am uninstall-docDATA \
+ uninstall-pkgconfigDATA
.PHONY: ChangeLog
@@ -556,6 +698,22 @@ ChangeLog:
$(CHANGELOG_CMD)
dist-hook: ChangeLog
+
+@BUILD_DOCS_TRUE@.mm.ps:
+@BUILD_DOCS_TRUE@ -$(AM_V_GEN) $(GROFF) -Tps $(GROFF_FLAGS) $< 2> index.$@.raw > $@
+@BUILD_DOCS_TRUE@ @if grep '^[^1-9.]' index.$@.raw | grep -v warning; then exit 1; \
+@BUILD_DOCS_TRUE@ else test $$? -le 1; fi
+
+@BUILD_DOCS_TRUE@.mm.txt:
+@BUILD_DOCS_TRUE@ $(AM_V_GEN) env GROFF_NO_SGR=TRUE $(GROFF) -Tutf8 $(GROFF_FLAGS) \
+@BUILD_DOCS_TRUE@ $< 2> index.$@.raw > $@
+
+@BUILD_DOCS_TRUE@.mm.html:
+@BUILD_DOCS_TRUE@ $(AM_V_GEN) $(GROFF) -Thtml $(GROFF_FLAGS) $< 2> index.$@.raw > $@
+
+@BUILD_DOCS_TRUE@.ps.pdf:
+@BUILD_DOCS_TRUE@ $(AM_V_GEN) $(PS2PDF) $< $@
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/X11/xtrans/Xtrans.mm b/X11/xtrans/Xtrans.mm
new file mode 100644
index 000000000..0d39e7d51
--- /dev/null
+++ b/X11/xtrans/Xtrans.mm
@@ -0,0 +1,789 @@
+.\" $XFree86: xc/doc/specs/xtrans/Xtrans.mm,v 1.2 2003/07/09 15:27:27 tsi Exp $
+'\".nr Ej 1
+.PH "'''"
+.ce
+\fBX Transport Interface\fR
+.sp
+Copyright (c) 1993, 1994 NCR Corporation - Dayton, Ohio, USA
+.sp
+All Rights Reserved
+.sp
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted, provided
+that the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation, and that the name NCR not be used in advertising
+or publicity pertaining to distribution of the software without specific,
+written prior permission. NCR makes no representations about the
+suitability of this software for any purpose. It is provided "as is"
+without express or implied warranty.
+.sp
+NCR DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
+NO EVENT SHALL NCR BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.sp
+Copyright 1993, 1994, 2002 The Open Group
+.sp
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the ``Software''), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+.sp
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+.sp
+THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+.sp
+Except as contained in this notice, the name of The Open Group shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from The Open Group.
+.sp
+X Window System is a trademark of The Open Group, Inc.
+.sp
+Designed by Stuart Anderson (NCR) with help from Ralph Mor (X Consortium)
+.sp
+.ce
+\fIDraft Version 0.6\fR
+.sp
+NOTE: This documentation does not completely match the implementation in R6
+(as a result of some late changes made in the code). Specifically, support
+was added for font server cloning, and conditional compliation was introduced
+for client vs. server code.
+.bp
+.H 1 "Purposes and Goals"
+.P
+The X Transport Interface is intended to combine all system and transport
+specific code into a single place in the source tree. This API should be used
+by all libraries, clients and servers of the X Window System. Use of this API
+should allow the addition of new types of transports and support for new
+platforms without making any changes to the source except in the X Transport
+Interface code.
+.P
+This interface should solve the problem of multiple #ifdef TRANSPORT and
+#ifdef PLATFORM statements scattered throughout the source tree.
+.P
+This interface should provide enough functionality to support all types of
+protocols, including connection oriented protocols such as X11 and FS, and
+connection-less oriented protocols such as XDMCP.
+.H 1 "Overview of the interface"
+.P
+The interface provides an API for use by applications. The functions in this
+API perform work that is common to all transports and systems, such as
+parsing an address into a host and port number. The functions in this API
+call transport specific functions that are contained in a table whose
+contents are defined at compile time. This table contains an entry for each
+type of transport. Each entry is a record containing mostly pointers to
+function that implements the interface for the given transport.
+.P
+This API does not provide an abstraction for select() or poll().
+These function are themselves transport independent, so an additional interface
+is not needed for these functions. It is also unclear how such an interface
+would affect performance.
+.H 1 "Definition of Address Specification Format"
+.P
+Addresses are specified in the following syntax,
+.sp
+\fIprotocol/host:port\fR
+.sp
+where \fIprotocol\fR specifies a protocol family or an alias for a protocol
+family. A definition of common protocol families is given in a later section.
+.P
+The \fIhost\fR part specifies the name of a host or other transport dependent
+entity that could be interpreted as a Network Service Access Point (NSAP).
+.P
+The \fIport\fR part specifies the name of a Transport Service Access Point
+(TSAP). The format of the TSAP is defined by the underlying transport
+implementation, but it is represented using a string format when it is part
+of an address.
+.H 1 "Internal Data Structures"
+.P
+There are two major data structures associated with the transport independent
+portion of this interface. Additional data structures may be used internally
+by each transport.
+.H 2 "Xtransport"
+.P
+Each transport supported has an entry in the transport table.
+The transport table is an array of \fIXtransport\fR records. Each record
+contains all the entry points for a single transport. This record is defined as:
+.DS
+.nf
+typedef struct _Xtransport {
+
+ char *TransName;
+ int flags;
+
+ XtransConnInfo (*OpenCOTSClient)(
+ struct _Xtransport *, /* transport */
+ char *, /* protocol */
+ char *, /* host */
+ char * /* port */
+ );
+
+ XtransConnInfo (*OpenCOTSServer)(
+ struct _Xtransport *, /* transport */
+ char *, /* protocol */
+ char *, /* host */
+ char * /* port */
+ );
+
+ XtransConnInfo (*OpenCLTSClient)(
+ struct _Xtransport *, /* transport */
+ char *, /* protocol */
+ char *, /* host */
+ char * /* port */
+ );
+
+ XtransConnInfo (*OpenCLTSServer)(
+ struct _Xtransport *, /* transport */
+ char *, /* protocol */
+ char *, /* host */
+ char * /* port */
+ );
+
+ int (*SetOption)(
+ XtransConnInfo, /* connection */
+ int, /* option */
+ int /* arg */
+ );
+
+ int (*CreateListener)(
+ XtransConnInfo, /* connection */
+ char *, /* port */
+ int /* flags */
+ );
+
+ int (*ResetListener)(
+ XtransConnInfo /* connection */
+ );
+
+ XtransConnInfo (*Accept)(
+ XtransConnInfo /* connection */
+ );
+
+ int (*Connect)(
+ XtransConnInfo, /* connection */
+ char *, /* host */
+ char * /* port */
+ );
+
+ int (*BytesReadable)(
+ XtransConnInfo, /* connection */
+ BytesReadable_t * /* pend */
+ );
+
+ int (*Read)(
+ XtransConnInfo, /* connection */
+ char *, /* buf */
+ int /* size */
+ );
+
+ int (*Write)(
+ XtransConnInfo, /* connection */
+ char *, /* buf */
+ int /* size */
+ );
+
+ int (*Readv)(
+ XtransConnInfo, /* connection */
+ struct iovec *, /* buf */
+ int /* size */
+ );
+
+ int (*Writev)(
+ XtransConnInfo, /* connection */
+ struct iovec *, /* buf */
+ int /* size */
+ );
+
+ int (*Disconnect)(
+ XtransConnInfo /* connection */
+ );
+
+ int (*Close)(
+ XtransConnInfo /* connection */
+ );
+
+} Xtransport;
+
+.fi
+.DE
+.P
+The \fIflags\fR field can contain an OR of the following masks:
+.sp
+\fITRANS_ALIAS\fR: indicates that this record is providing an alias,
+and should not be used to create a listner.
+.sp
+\fITRANS_LOCAL\fR: indicates that this is a LOCALCONN transport.
+
+.H 2 "XtransConnInfo"
+.P
+Each connection will have an opaque \fIXtransConnInfo\fR transport connection
+object allocated for it. This record contains information specific to the
+connection. The record is defined
+as:
+.DS
+.nf
+typedef struct _XtransConnInfo *XtransConnInfo;
+
+struct _XtransConnInfo {
+ struct _Xtransport *transptr;
+ char *priv;
+ int flags;
+ int fd;
+ int family;
+ char *addr;
+ int addrlen;
+ char *peeraddr;
+ int peeraddrlen;
+};
+.fi
+.DE
+.H 1 "Exposed Transport Independent API"
+.P
+This API is included in each library and server that uses it. The API
+may be used by the library, but it is not added to the public API for that
+library. This interface is simply an implementation
+facilitator. This API contains a low level set of core primitives, and a few
+utility functions that are built on top of the primitives. The utility
+functions exist to provide a more familiar interface that can be used to
+port existing code.
+.P
+A macro is defined in Xtrans.h for TRANS(func) that creates a unique function
+name depending on where the code is compiled. For example, when built for Xlib,
+TRANS(OpenCOTSClient) becomes _X11TransOpenCOTSClient.
+.P
+All failures are considered fatal, and the connection should be closed and
+re-established if desired. In most cases, however, the value of errno will
+be available for debugging purposes.
+.H 2 "Core Interface API"
+.BL
+.LI
+XtransConnInfo
+TRANS(OpenCOTSClient)(char *address)
+.P
+This function creates a Connection-Oriented Transport that is suitable for
+use by a client.
+The parameter \fIaddress\fR contains the full address of the
+server to which this endpoint will be connected.
+This functions returns an opaque transport connection object on success,
+or NULL on failure.
+.LI
+XtransConnInfo
+TRANS(OpenCOTSServer)(char *address)
+.P
+This function creates a Connection-Oriented Transport that is suitable for
+use by a server.
+The parameter \fIaddress\fR contains the full address to which this
+server will be bound.
+This functions returns an opaque transport connection object on success,
+or NULL on failure.
+.LI
+XtransConnInfo
+TRANS(OpenCLTSClient)(char *address)
+.P
+This function creates a Connection-Less Transport that is suitable for
+use by a client.
+The parameter \fIaddress\fR contains the full address of the
+server to which this endpoint will be connected.
+This functions returns an opaque transport connection object on success,
+or NULL on failure.
+.LI
+XtransConnInfo
+TRANS(OpenCLTSServer)(char *address)
+.P
+This function creates a Connection-Less Transport that is suitable for
+use by a server.
+The parameter \fIaddress\fR contains the full address to which this
+server will be bound.
+This functions returns an opaque transport connection object on success,
+or NULL on failure.
+.LI
+int TRANS(SetOption)(XtransConnInfo connection, int option, int arg)
+.P
+This function sets transport options, similar to the way setsockopt() and
+ioctl() work.
+The parameter \fIconnection\fR is an endpoint that was obtained from
+_XTransOpen*() functions.
+The parameter \fIoption\fR contains the option that will be set. The actual
+values for \fIoption\fR are defined in a later section.
+The parameter \fIarg\fR can be used to pass in an additional value that may
+be required by some options.
+This function return 0 on success and -1 on failure.
+.P
+Note: Based on current usage, the complimentary function TRANS(GetOption)()
+is not necessary.
+.LI
+int TRANS(CreateListener)(XtransConnInfo connection, char *port, int flags)
+.P
+This function sets up the server endpoint for listening.
+The parameter \fIconnection\fR is an endpoint that was obtained from
+TRANS(OpenCOTSServer)() or TRANS(OpenCLTSServer)().
+The parameter \fIport\fR specifies the port to which this endpoint
+should be bound for listening.
+If \fIport\fR is NULL, then the transport may attempt to allocate any
+available TSAP for this connection. If the transport cannot support this,
+then this function will return a failure.
+The \fIflags\fR parameter can be set to ADDR_IN_USE_ALLOWED to allow
+the call to the underlying binding function to fail with a EADDRINUSE
+error without causing the TRANS(CreateListener) function itself to
+fail.
+This function return 0 on success and -1 on failure.
+.LI
+int TRANS(ResetListener)(XtransConnInfo connection)
+.P
+When a server is restarted, certain listen ports may need to be reset.
+For example, unix domain needs to check that the file used for communication
+has not been deleted. If it has, it must be recreated.
+The parameter \fIconnection\fR is an opened and bound endpoint that was
+obtained from TRANS(OpenCOTSServer)() and passed to TRANS(CreateListener)().
+This function will return one of the following values: TRANS_RESET_NOOP,
+TRANS_RESET_NEW_FD, or TRANS_RESET_FAILURE.
+.LI
+XtransConnInfo
+TRANS(Accept)(XtransConnInfo connection)
+.P
+Once a connection indication is received, this function can be called to
+accept the connection.
+The parameter \fIconnection\fR is an opened and bound endpoint that was
+obtained from TRANS(OpenCOTSServer)() and passed to TRANS(CreateListener)().
+This function will return a new opaque transport connection object upon
+success, NULL otherwise.
+.LI
+int TRANS(Connect)(XtransConnInfo connection, char *address)
+.P
+This function creates a connection to a server.
+The parameter \fIconnection\fR is an endpoint that was obtained from
+TRANS(OpenCOTSClient)().
+The parameters \fIaddress\fR specify the TSAP to which this
+endpoint should connect. If the protocol is included in the address, it will
+be ignored.
+This function return 0 on success and -1 on failure.
+.LI
+int TRANS(BytesReadable)(XtransConnInfo connection, BytesReadable_t *pend);
+.P
+This function provides the same functionality as the BytesReadable macro.
+.LI
+int TRANS(Read)(XtransConnInfo connection, char *buf, int size)
+.P
+This function will return the number of bytes requested on a COTS connection,
+and will return the minimum of the number bytes requested or the size of
+the incoming packet on a CLTS connection.
+.LI
+int TRANS(Write)(XtransConnInfo connection, char *buf, int size)
+.P
+This function will write the requested number of bytes on a COTS connection, and
+will send a packet of the requested size on a CLTS connection.
+.LI
+int TRANS(Readv)(XtransConnInfo connection, struct iovec *buf, int size)
+.P
+Similar to TRANS(Read)().
+.LI
+int TRANS(Writev)(XtransConnInfo connection, struct iovec *buf, int size)
+.P
+Similar to TRANS(Write)().
+.LI
+int TRANS(Disconnect)(XtransConnInfo connection)
+.P
+This function is used when an orderly disconnect is desired. This function
+breaks the connection on the transport. It is similar to the
+socket function shutdown().
+.LI
+int TRANS(Close)(XtransConnInfo connection)
+.P
+This function closes the transport, unbinds it, and frees all resources that
+was associated with the transport. If a TRANS(Disconnect) call was not made
+on the connection, a disorderly disconnect may occur.
+.LI
+int TRANS(IsLocal)(XtransConnInfo connection)
+.P
+Returns TRUE if it is a local transport.
+.LI
+int TRANS(GetMyAddr)(XtransConnInfo connection,
+.br
+ int *familyp, int *addrlenp, Xtransaddr **addrp)
+.P
+This function is similar to getsockname(). This function will allocate space
+for the address, so it must be freed by the caller. Not all transports will
+have a valid address until a connection is established. This function should
+not be used until the connection is established with Connect() or Accept().
+.LI
+int TRANS(GetPeerAddr)(XtransConnInfo connection,
+.br
+ int *familyp, int *addrlenp, Xtransaddr **addrp)
+.P
+This function is similar to getpeername(). This function will allocate space
+for the address, so it must be freed by the caller. Not all transports will
+have a valid address until a connection is established. This function should
+not be used until the connection is established with Connect() or Accept().
+.LI
+int TRANS(GetConnectionNumber)(XtransConnInfo connection)
+.P
+Returns the file descriptor associated with this transport.
+.LI
+int TRANS(MakeAllCOTSServerListeners)(
+.br
+ char *port, int *partial_ret, int *count_ret, XtransConnInfo **connections_ret)
+.P
+This function should be used by most servers. It will try to establish a COTS
+server endpoint for each transport listed in the transport table.
+\fIpartial_ret\fR will be set to True if only a partial network could be
+created. \fIcount_ret\fR is the number of transports returns, and
+\fIconnections_ret\fR is the list of transports.
+.LI
+int TRANS(MakeAllCLTSServerListeners)(
+.br
+ char *port, int *partial_ret, int *count_ret, XtransConnInfo **connections_ret)
+.P
+This function should be used by most servers. It will try to establish a CLTS
+server endpoint for each transport listed in the transport table.
+\fIpartial_ret\fR will be set to True if only a partial network could be
+created. \fIcount_ret\fR is the number of transports returns, and
+\fIconnections_ret\fR is the list of transports.
+.LE
+.H 2 "Utility API"
+.P
+This section describes a few useful functions that have been implemented on top
+of the Core Interface API. These functions are being provided as a convenience.
+.BL
+.LI
+int TRANS(ConvertAddress)(int *familyp, int *addrlenp, Xtransaddr *addrp)
+.P
+This function converts a sockaddr based address to an
+X authorization based address (ie AF_INET, AF_UNIX to the
+X protocol definition (ie FamilyInternet, FamilyLocal)).
+
+.LE
+.H 1 "Transport Option Definition"
+.P
+The following options are defined for the TRANS(SetOption)() function. If an
+OS or transport does not support any of these options, then it will silently
+ignore the option.
+.BL
+.LI
+TRANS_NONBLOCKING
+.P
+This option controls the blocking mode of the connection. If the argument
+is set to 1, then the connection will be set to blocking. If the argument
+is set to 0, then the connection will be set to non-blocking.
+.LI
+TRANS_CLOSEONEXEC
+.P
+This option determines what will happen to the connection when an exec
+is encountered. If the argument is set to 1, then the connection will be
+closed when an exec occurs. If the argument is set to 0, then the connection
+will not be closed when an exec occurs.
+.LE
+.H 1 "Hidden Transport Dependent API"
+.P
+The hidden transport dependent functions are placed in the Xtransport record.
+These function are similar to the Exposed Transport Independent API, but some
+of the parameters and return values are slightly different.
+Stuff like the #ifdef SUNSYSV should be handled inside these functions.
+.BL
+.LI
+XtransConnInfo *OpenCOTSClient (
+.br
+ struct _Xtransport *thistrans, char *protocol, char *host, char *port)
+.P
+This function creates a Connection-Oriented Transport. The parameter
+\fIthistrans\fR points to an Xtransport entry in the transport table. The
+parameters \fIprotocol\fR, \fIhost\fR, and \fIport\fR point to strings
+containing the corresponding parts of the address that was passed into
+TRANS(OpenCOTSClient)().
+.P
+This function must allocate and initialize the contents of the XtransConnInfo
+structure that is returned by this function. This function will open the
+transport, and bind it into the transport namespace if applicable. The
+local address portion of the XtransConnInfo structure will also be filled
+in by this function.
+.LI
+XtransConnInfo *OpenCOTSServer (
+.br
+ struct _Xtransport *thistrans, char *protocol, char *host, char *port)
+.P
+This function creates a Connection-Oriented Transport. The parameter
+\fIthistrans\fR points to an Xtransport entry in the transport table. The
+parameters \fIprotocol\fR, \fIhost\fR, and \fIport\fR point to strings
+containing the corresponding parts of the address that was passed into
+TRANS(OpenCOTSClient)().
+.P
+This function must allocate and initialize the contents of the XtransConnInfo
+structure that is returned by this function. This function will open the
+transport.
+.LI
+XtransConnInfo *OpenCLTSClient (
+.br
+ struct _Xtransport *thistrans, char *protocol, char *host, char *port)
+.P
+This function creates a Connection-Less Transport. The parameter
+\fIthistrans\fR points to an Xtransport entry in the transport table. The
+parameters \fIprotocol\fR, \fIhost\fR, and \fIport\fR point to strings
+containing the corresponding parts of the address that was passed into
+TRANS(OpenCOTSClient)().
+.P
+This function must allocate and initialize the contents of the XtransConnInfo
+structure that is returned by this function. This function will open the
+transport, and bind it into the transport namespace if applicable. The
+local address portion of the XtransConnInfo structure will also be filled
+in by this function.
+.LI
+XtransConnInfo *OpenCLTSServer (
+.br
+ struct _Xtransport *thistrans, char *protocol, char *host, char *port)
+.P
+This function creates a Connection-Less Transport. The parameter
+\fIthistrans\fR points to an Xtransport entry in the transport table. The
+parameters \fIprotocol\fR, \fIhost\fR, and \fIport\fR point to strings
+containing the corresponding parts of the address that was passed into
+TRANS(OpenCOTSClient)().
+.P
+This function must allocate and initialize the contents of the XtransConnInfo
+structure that is returned by this function. This function will open the
+transport.
+.LI
+int SetOption (struct _Xtransport *thistrans, int option, int arg)
+.P
+This function provides a transport dependent way of implementing the options
+defined by the X Transport Interface. In the current prototype, this function
+is not being used, because all of the option defined so far, are transport
+independent. This function will have to be used if a radically different
+transport type is added, or a transport dependent option is defined.
+.LI
+int CreateListener (struct _Xtransport *thistrans, char *port, int flags )
+.P
+This function takes a transport endpoint opened for a server, and sets it
+up to listen for incoming connection requests. The parameter \fIport\fR
+should contain the port portion of the address that was passed to the Open
+function.
+.P
+The parameter \fIflags\fR should be set to ADDR_IN_USE_ALLOWED if the
+underlying transport endpoint may be already bound and this should not
+be considered as an error. Otherwise \fIflags\fR sould be set to 0.
+This is used by IPv6 code, where the same socket can be bound to both
+an IPv6 address and then to a IPv4 address.
+.P
+This function will bind the transport into the transport name space if
+applicable, and fill in the local address portion of the XtransConnInfo
+structure. The transport endpoint will then be set to listen for
+incoming connection requests.
+.LI
+int ResetListener (struct _Xtransport *thistrans)
+.P
+This function resets the transport for listening.
+.LI
+XtransConnInfo Accept(struct _Xtransport *thistrans)
+.P
+This function creates a new transport endpoint as a result of an incoming
+connection request. The parameter \fIthistrans\fR is the endpoint that was opened
+for listening by the server. The new endpoint is opened and bound into the
+transport's namespace. A XtransConnInfo structure describing the new endpoint
+is returned from this function
+.LI
+int Connect(struct _Xtransport *thistrans, char *host, char *port )
+.P
+This function establishes a connection to a server. The parameters \fIhost\fR
+and \fIport\fR describe the server to which the connection should be
+established. The connection will be established so that Read() and Write()
+call can be made.
+.LI
+int BytesReadable(struct _Xtransport *thistrans, BytesReadable_t *pend )
+.P
+This function replaces the BytesReadable() macro. This allows each transport
+to have it's own mechanism for determining how much data is ready to be read.
+.LI
+int Read(struct _Xtransport *thistrans, char *buf, int size )
+.P
+This function reads \fIsize\fR bytes into \fIbuf\fR from the connection.
+.LI
+int Write(struct _Xtransport *thistrans, char *buf, int size )
+.P
+This function writes \fIsize\fR bytes from \fIbuf\fR to the connection.
+.LI
+int Readv(struct _Xtransport *thistrans, struct iovec *buf, int size )
+.P
+This function performs a readv() on the connection.
+.LI
+int Writev(struct _Xtransport *thistrans, struct iovec *buf, int size )
+.P
+This function performs a writev() on the connection.
+.LI
+int Disconnect(struct _Xtransport *thistrans)
+.P
+This function initiates an orderly shutdown of a connection. If a transport
+does not distinguish between orderly and disorderly disconnects, then a
+call to this function will have no affect.
+.LI
+int Close(struct _Xtransport *thistrans)
+.P
+This function will break the connection, and close the endpoint.
+.LE
+.H 1 "Configuration"
+.P
+The implementation of each transport can be platform specific. It is expected
+that existing connection types such as TCPCONN, UNIXCONN, LOCALCONN and
+STREAMSCONN will be replaced with flags for each possible transport type.
+.P
+Below are the flags that can be set in \fIConnectionFlags\fR in the vendor.cf
+or site.def config files.
+.TS
+center;
+l l .
+TCPCONN Enables the INET (IPv4) Domain Socket based transport
+IPv6 Extends TCPCONN to enable IPv6 Socket based transport
+UNIXCONN Enables the UNIX Domain Sokcet based transport
+STREAMSCONN Enables the TLI based transports
+LOCALCONN Enables the SYSV Local connection transports
+DNETCONN Enables the DECnet transports
+.TE
+.H 1 "Transport Specific Definitions"
+.TS
+center box;
+lb | cb sb sb
+lb | cb | cb | cb
+lb | cb | cb | cb
+l | l | l | l.
+Protocol Address Component
+ _ _ _
+Family protocol host port
+=
+Internet T{
+inet
+.br
+inet6
+.br
+tcp
+.br
+udp
+T} name of an internet addressable host T{
+string containing the name of a service or a valid port number.
+.br
+Example: "xserver0", "7100"
+T}
+_
+DECnet decnet name of a DECnet addressable host T{
+string containing the complete name of the object.
+.br
+Example: "X$X0"
+T}
+_
+NETware ipx name of a NETware addressable host T{
+Not sure of the specifics yet.
+T}
+_
+OSI osi name of an OSI addressable host T{
+Not sure of the specifics yet.
+T}
+_
+Local T{
+local
+.br
+pts
+.br
+named
+.br
+sco
+.br
+isc
+T} (ignored) T{
+String containing the port name, ie "xserver0", "fontserver0".
+T}
+.TE
+.H 1 "Implementation Notes"
+.P
+This section refers to the prototype implementation that is being developed
+concurrently with this document. This prototype has been able to flush out
+many details and problems as the specification was being developed.
+.P
+All of the source code for this interface is located in xc/lib/xtrans.
+.P
+All functions names in the source are of the format TRANS(func)(). The TRANS()
+macro is defined as
+.DS
+.sp
+#if (__STDC__ && !defined(UNIXCPP)) || defined(ANSICPP)
+#define TRANS(func) _PROTOCOLTrans##func
+#else
+#define TRANS(func) _PROTOCOLTrans/**/func
+#endif
+.sp
+.DE
+PROTOCOL will be uniquely defined in each directory where this code
+is compiled. PROTOCOL will be defined to be the name of the protocol that is
+implemented by the library or server, such as X11, FS, and ICE.
+.P
+All libraries and servers that use the X Transport Interface should have a new
+file called transport.c. This file will include the transports based
+on the configuration flags \fIConnectionFlags\fR. Below is an example
+transport.c.
+.DS
+.nf
+#include "Xtransint.h"
+
+#ifdef DNETCONN
+#include "Xtransdnet.c"
+#endif
+#ifdef LOCALCONN
+#include "Xtranslocal.c"
+#endif
+#ifdef TCPCONN
+#include "Xtranssock.c"
+#endif
+#ifdef STREAMSCONN
+#include "Xtranstli.c"
+#endif
+#include "Xtrans.c"
+#include "Xtransutil.c"
+.fi
+.DE
+.P
+The source files for this interface are listed below.
+.DS
+.TS
+center;
+l l.
+Xtrans.h T{
+Function prototypes and defines for
+the Transport Independent API.
+T}
+Xtransint.h T{
+Used by the interface implementation only.
+Contains the internal data structures.
+T}
+Xtranssock.c T{
+Socket implementation of the Transport Dependent API.
+T}
+Xtranstli.c T{
+TLI implementation of the Transport Dependent API.
+T}
+Xtransdnet.c T{
+DECnet implementation of the Transport Dependent API.
+T}
+Xtranslocal.c T{
+Implementation of the Transport Dependent API for
+SYSV Local connections.
+T}
+Xtrans.c T{
+Exposed Transport Independent API Functions.
+T}
+Xtransutil.c T{
+Collection of Utility functions that use the
+X Transport Interface.
+T}
+.TE
+.DE
+.P
+The file \fIXtransint.h\fR contains much of the transport related code that
+previously in Xlibint.h and Xlibnet.h. This will make the definitions
+available for all transport users. This should also obsolete the equivalent
+code in other libraries.
diff --git a/X11/xtrans/Xtranssock.c b/X11/xtrans/Xtranssock.c
index 128bd4a94..4c39c4064 100644
--- a/X11/xtrans/Xtranssock.c
+++ b/X11/xtrans/Xtranssock.c
@@ -233,19 +233,6 @@ static int TRANS(SocketINETClose) (XtransConnInfo ciptr);
#endif
/*
- * This provides compatibility for apps linked against system libraries
- * that don't have IPv6 support.
- */
-#if defined(IPv6) && defined(AF_INET6)
-static const struct in6_addr local_in6addr_any = IN6ADDR_ANY_INIT;
-#pragma weak in6addr_any = local_in6addr_any
-#ifndef __USLC__
-#pragma weak getaddrinfo
-#endif
-static int haveIPv6 = 1;
-#endif
-
-/*
* These are some utility function used by the real interface function below.
*/
@@ -278,25 +265,21 @@ TRANS(SocketINETGetAddr) (XtransConnInfo ciptr)
{
#if defined(IPv6) && defined(AF_INET6)
struct sockaddr_storage socknamev6;
-#endif
+#else
struct sockaddr_in socknamev4;
+#endif
void *socknamePtr;
SOCKLEN_T namelen;
PRMSG (3,"SocketINETGetAddr(%p)\n", ciptr, 0, 0);
#if defined(IPv6) && defined(AF_INET6)
- if (haveIPv6)
- {
- namelen = sizeof(socknamev6);
- socknamePtr = &socknamev6;
- }
- else
+ namelen = sizeof(socknamev6);
+ socknamePtr = &socknamev6;
+#else
+ namelen = sizeof(socknamev4);
+ socknamePtr = &socknamev4;
#endif
- {
- namelen = sizeof(socknamev4);
- socknamePtr = &socknamev4;
- }
bzero(socknamePtr, namelen);
@@ -324,15 +307,10 @@ TRANS(SocketINETGetAddr) (XtransConnInfo ciptr)
}
#if defined(IPv6) && defined(AF_INET6)
- if (haveIPv6)
- {
- ciptr->family = ((struct sockaddr *)socknamePtr)->sa_family;
- }
- else
+ ciptr->family = ((struct sockaddr *)socknamePtr)->sa_family;
+#else
+ ciptr->family = socknamev4.sin_family;
#endif
- {
- ciptr->family = socknamev4.sin_family;
- }
ciptr->addrlen = namelen;
memcpy (ciptr->addr, socknamePtr, ciptr->addrlen);
@@ -357,7 +335,7 @@ TRANS(SocketINETGetPeerAddr) (XtransConnInfo ciptr)
SOCKLEN_T namelen;
#if defined(IPv6) && defined(AF_INET6)
- if (haveIPv6 && ciptr->family == AF_INET6)
+ if (ciptr->family == AF_INET6)
{
namelen = sizeof(socknamev6);
socknamePtr = &socknamev6;
@@ -411,14 +389,6 @@ TRANS(SocketOpen) (int i, int type)
PRMSG (3,"SocketOpen(%d,%d)\n", i, type, 0);
-#if defined(IPv6) && defined(AF_INET6)
- if (getaddrinfo == NULL)
- haveIPv6 = 0;
-
- if (!haveIPv6 && Sockettrans2devtab[i].family == AF_INET6)
- return NULL;
-#endif
-
if ((ciptr = (XtransConnInfo) xcalloc (
1, sizeof(struct _XtransConnInfo))) == NULL)
{
@@ -1487,7 +1457,7 @@ TRANS(SocketINETConnect) (XtransConnInfo ciptr, char *host, char *port)
#endif
#if defined(IPv6) && defined(AF_INET6)
- if (haveIPv6) {
+ {
if (addrlist != NULL) {
if (strcmp(host,addrlist->host) || strcmp(port,addrlist->port)) {
if (addrlist->firstaddr)
@@ -1629,8 +1599,8 @@ TRANS(SocketINETConnect) (XtransConnInfo ciptr, char *host, char *port)
addrlist->addr = addrlist->addr->ai_next;
}
}
- } else
-#endif
+ }
+#else
{
/*
* Build the socket name.
@@ -1704,6 +1674,7 @@ TRANS(SocketINETConnect) (XtransConnInfo ciptr, char *host, char *port)
socketaddr = (struct sockaddr *) &sockname;
socketaddrlen = sizeof(sockname);
}
+#endif
/*
* Turn on socket keepalive so the client process will eventually
@@ -1754,7 +1725,7 @@ TRANS(SocketINETConnect) (XtransConnInfo ciptr, char *host, char *port)
if (olderrno == ECONNREFUSED || olderrno == EINTR
#if defined(IPv6) && defined(AF_INET6)
- || (haveIPv6 && ((addrlist->addr->ai_next != NULL) ||
+ || (((addrlist->addr->ai_next != NULL) ||
(addrlist->addr != addrlist->firstaddr)) &&
(olderrno == ENETUNREACH || olderrno == EAFNOSUPPORT ||
olderrno == EADDRNOTAVAIL || olderrno == ETIMEDOUT
@@ -1800,7 +1771,7 @@ TRANS(SocketINETConnect) (XtransConnInfo ciptr, char *host, char *port)
}
#if defined(IPv6) && defined(AF_INET6)
- if (haveIPv6 && res != 0) {
+ if (res != 0) {
addrlist->addr = addrlist->addr->ai_next;
}
#endif
@@ -1824,20 +1795,13 @@ UnixHostReallyLocal (char *host)
{
char hostnamebuf[256];
-#if defined(IPv6) && defined(AF_INET6)
- if (getaddrinfo == NULL)
- haveIPv6 = 0;
-#endif
-
TRANS(GetHostname) (hostnamebuf, sizeof (hostnamebuf));
if (strcmp (hostnamebuf, host) == 0)
{
return (1);
- }
+ } else {
#if defined(IPv6) && defined(AF_INET6)
- else if (haveIPv6)
- {
struct addrinfo *localhostaddr;
struct addrinfo *otherhostaddr;
struct addrinfo *i, *j;
@@ -1883,10 +1847,7 @@ UnixHostReallyLocal (char *host)
freeaddrinfo(localhostaddr);
freeaddrinfo(otherhostaddr);
return equiv;
- }
-#endif
- else
- {
+#else
/*
* A host may have more than one network address. If any of the
* network addresses of 'host' (specified to the connect call)
@@ -1955,6 +1916,7 @@ UnixHostReallyLocal (char *host)
i++;
}
return (equiv);
+#endif
}
}
diff --git a/X11/xtrans/aclocal.m4 b/X11/xtrans/aclocal.m4
index b45e8b276..620077932 100644
--- a/X11/xtrans/aclocal.m4
+++ b/X11/xtrans/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,551 +11,15 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf. If you want to use that,
-you should regenerate the build system entirely.], [63])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
-dnl xorg-macros.m4. Generated from xorg-macros.m4.in xorgversion.m4 by configure.
-dnl
-dnl Copyright 2005-2006 Sun Microsystems, Inc. All rights reserved.
-dnl
-dnl Permission is hereby granted, free of charge, to any person obtaining a
-dnl copy of this software and associated documentation files (the
-dnl "Software"), to deal in the Software without restriction, including
-dnl without limitation the rights to use, copy, modify, merge, publish,
-dnl distribute, and/or sell copies of the Software, and to permit persons
-dnl to whom the Software is furnished to do so, provided that the above
-dnl copyright notice(s) and this permission notice appear in all copies of
-dnl the Software and that both the above copyright notice(s) and this
-dnl permission notice appear in supporting documentation.
-dnl
-dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
-dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
-dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
-dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
-dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
-dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-dnl
-dnl Except as contained in this notice, the name of a copyright holder
-dnl shall not be used in advertising or otherwise to promote the sale, use
-dnl or other dealings in this Software without prior written authorization
-dnl of the copyright holder.
-
-# XORG_MACROS_VERSION(required-version)
-# -------------------------------------
-# Minimum version: 1.1.0
-#
-# If you're using a macro added in Version 1.1 or newer, include this in
-# your configure.ac with the minimum required version, such as:
-# XORG_MACROS_VERSION(1.1)
-#
-# To force at least a version with this macro defined, also add:
-# m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
-#
-#
-# See the "minimum version" comment for each macro you use to see what
-# version you require.
-AC_DEFUN([XORG_MACROS_VERSION],[
- [XORG_MACROS_needed_version=$1
- XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
- XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
- AC_MSG_CHECKING([if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}])
- [XORG_MACROS_version=1.2.1
- XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
- XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
- if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
- AC_MSG_ERROR([configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x])
- fi
- if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
- AC_MSG_ERROR([configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer])
- fi
- AC_MSG_RESULT([yes, $XORG_MACROS_version])
-]) # XORG_MACROS_VERSION
-
-# XORG_PROG_RAWCPP()
-# ------------------
-# Minimum version: 1.0.0
-#
-# Find cpp program and necessary flags for use in pre-processing text files
-# such as man pages and config files
-AC_DEFUN([XORG_PROG_RAWCPP],[
-AC_REQUIRE([AC_PROG_CPP])
-AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}],
- [$PATH:/bin:/usr/bin:/usr/lib:/usr/libexec:/usr/ccs/lib:/usr/ccs/lbin:/lib])
-
-# Check for flag to avoid builtin definitions - assumes unix is predefined,
-# which is not the best choice for supporting other OS'es, but covers most
-# of the ones we need for now.
-AC_MSG_CHECKING([if $RAWCPP requires -undef])
-AC_LANG_CONFTEST([Does cpp redefine unix ?])
-if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
- AC_MSG_RESULT([no])
-else
- if test `${RAWCPP} -undef < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
- RAWCPPFLAGS=-undef
- AC_MSG_RESULT([yes])
- # under Cygwin unix is still defined even with -undef
- elif test `${RAWCPP} -undef -ansi < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
- RAWCPPFLAGS="-undef -ansi"
- AC_MSG_RESULT([yes, with -ansi])
- else
- AC_MSG_ERROR([${RAWCPP} defines unix with or without -undef. I don't know what to do.])
- fi
-fi
-rm -f conftest.$ac_ext
-
-AC_MSG_CHECKING([if $RAWCPP requires -traditional])
-AC_LANG_CONFTEST([Does cpp preserve "whitespace"?])
-if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve \"'` -eq 1 ; then
- AC_MSG_RESULT([no])
-else
- if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve \"'` -eq 1 ; then
- RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_ERROR([${RAWCPP} does not preserve whitespace with or without -traditional. I don't know what to do.])
- fi
-fi
-rm -f conftest.$ac_ext
-AC_SUBST(RAWCPPFLAGS)
-]) # XORG_PROG_RAWCPP
-
-# XORG_MANPAGE_SECTIONS()
-# -----------------------
-# Minimum version: 1.0.0
-#
-# Determine which sections man pages go in for the different man page types
-# on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
-# Not sure if there's any better way than just hardcoding by OS name.
-# Override default settings by setting environment variables
-
-AC_DEFUN([XORG_MANPAGE_SECTIONS],[
-AC_REQUIRE([AC_CANONICAL_HOST])
-
-if test x$APP_MAN_SUFFIX = x ; then
- APP_MAN_SUFFIX=1
-fi
-if test x$APP_MAN_DIR = x ; then
- APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
-fi
-
-if test x$LIB_MAN_SUFFIX = x ; then
- LIB_MAN_SUFFIX=3
-fi
-if test x$LIB_MAN_DIR = x ; then
- LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
-fi
-
-if test x$FILE_MAN_SUFFIX = x ; then
- case $host_os in
- solaris*) FILE_MAN_SUFFIX=4 ;;
- *) FILE_MAN_SUFFIX=5 ;;
- esac
-fi
-if test x$FILE_MAN_DIR = x ; then
- FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
-fi
-
-if test x$MISC_MAN_SUFFIX = x ; then
- case $host_os in
- solaris*) MISC_MAN_SUFFIX=5 ;;
- *) MISC_MAN_SUFFIX=7 ;;
- esac
-fi
-if test x$MISC_MAN_DIR = x ; then
- MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
-fi
-
-if test x$DRIVER_MAN_SUFFIX = x ; then
- case $host_os in
- solaris*) DRIVER_MAN_SUFFIX=7 ;;
- *) DRIVER_MAN_SUFFIX=4 ;;
- esac
-fi
-if test x$DRIVER_MAN_DIR = x ; then
- DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
-fi
-
-if test x$ADMIN_MAN_SUFFIX = x ; then
- case $host_os in
- solaris*) ADMIN_MAN_SUFFIX=1m ;;
- *) ADMIN_MAN_SUFFIX=8 ;;
- esac
-fi
-if test x$ADMIN_MAN_DIR = x ; then
- ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
-fi
-
-
-AC_SUBST([APP_MAN_SUFFIX])
-AC_SUBST([LIB_MAN_SUFFIX])
-AC_SUBST([FILE_MAN_SUFFIX])
-AC_SUBST([MISC_MAN_SUFFIX])
-AC_SUBST([DRIVER_MAN_SUFFIX])
-AC_SUBST([ADMIN_MAN_SUFFIX])
-AC_SUBST([APP_MAN_DIR])
-AC_SUBST([LIB_MAN_DIR])
-AC_SUBST([FILE_MAN_DIR])
-AC_SUBST([MISC_MAN_DIR])
-AC_SUBST([DRIVER_MAN_DIR])
-AC_SUBST([ADMIN_MAN_DIR])
-]) # XORG_MANPAGE_SECTIONS
-
-# XORG_CHECK_LINUXDOC
-# -------------------
-# Minimum version: 1.0.0
-#
-# Defines the variable MAKE_TEXT if the necessary tools and
-# files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
-# Whether or not the necessary tools and files are found can be checked
-# with the AM_CONDITIONAL "BUILD_LINUXDOC"
-AC_DEFUN([XORG_CHECK_LINUXDOC],[
-if test x$XORG_SGML_PATH = x ; then
- XORG_SGML_PATH=$prefix/share/sgml
-fi
-HAVE_DEFS_ENT=
-
-if test x"$cross_compiling" = x"yes" ; then
- HAVE_DEFS_ENT=no
-else
- AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
-fi
-
-AC_PATH_PROG(LINUXDOC, linuxdoc)
-AC_PATH_PROG(PS2PDF, ps2pdf)
-
-AC_MSG_CHECKING([Whether to build documentation])
-
-if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
- BUILDDOC=yes
-else
- BUILDDOC=no
-fi
-
-AM_CONDITIONAL(BUILD_LINUXDOC, [test x$BUILDDOC = xyes])
-
-AC_MSG_RESULT([$BUILDDOC])
-
-AC_MSG_CHECKING([Whether to build pdf documentation])
-
-if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
- BUILDPDFDOC=yes
-else
- BUILDPDFDOC=no
-fi
-
-AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
-
-AC_MSG_RESULT([$BUILDPDFDOC])
-
-MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
-MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
-MAKE_PDF="$PS2PDF"
-MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B html --split=0"
-
-AC_SUBST(MAKE_TEXT)
-AC_SUBST(MAKE_PS)
-AC_SUBST(MAKE_PDF)
-AC_SUBST(MAKE_HTML)
-]) # XORG_CHECK_LINUXDOC
-
-# XORG_CHECK_DOCBOOK
-# -------------------
-# Minimum version: 1.0.0
-#
-# Checks for the ability to build output formats from SGML DocBook source.
-# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
-# indicates whether the necessary tools and files are found and, if set,
-# $(MAKE_XXX) blah.sgml will produce blah.xxx.
-AC_DEFUN([XORG_CHECK_DOCBOOK],[
-if test x$XORG_SGML_PATH = x ; then
- XORG_SGML_PATH=$prefix/share/sgml
-fi
-HAVE_DEFS_ENT=
-BUILDTXTDOC=no
-BUILDPDFDOC=no
-BUILDPSDOC=no
-BUILDHTMLDOC=no
-
-AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
-
-AC_PATH_PROG(DOCBOOKPS, docbook2ps)
-AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
-AC_PATH_PROG(DOCBOOKHTML, docbook2html)
-AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
-
-AC_MSG_CHECKING([Whether to build text documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
- test x$BUILD_TXTDOC != xno; then
- BUILDTXTDOC=yes
-fi
-AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
-AC_MSG_RESULT([$BUILDTXTDOC])
-
-AC_MSG_CHECKING([Whether to build PDF documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
- test x$BUILD_PDFDOC != xno; then
- BUILDPDFDOC=yes
-fi
-AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
-AC_MSG_RESULT([$BUILDPDFDOC])
-
-AC_MSG_CHECKING([Whether to build PostScript documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
- test x$BUILD_PSDOC != xno; then
- BUILDPSDOC=yes
-fi
-AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
-AC_MSG_RESULT([$BUILDPSDOC])
-
-AC_MSG_CHECKING([Whether to build HTML documentation])
-if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
- test x$BUILD_HTMLDOC != xno; then
- BUILDHTMLDOC=yes
-fi
-AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
-AC_MSG_RESULT([$BUILDHTMLDOC])
-
-MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
-MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
-MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
-MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
-
-AC_SUBST(MAKE_TEXT)
-AC_SUBST(MAKE_PS)
-AC_SUBST(MAKE_PDF)
-AC_SUBST(MAKE_HTML)
-]) # XORG_CHECK_DOCBOOK
-
-# XORG_CHECK_MALLOC_ZERO
-# ----------------------
-# Minimum version: 1.0.0
-#
-# Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
-# malloc(0) returns NULL. Packages should add one of these cflags to
-# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
-AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
-AC_ARG_ENABLE(malloc0returnsnull,
- AC_HELP_STRING([--enable-malloc0returnsnull],
- [malloc(0) returns NULL (default: auto)]),
- [MALLOC_ZERO_RETURNS_NULL=$enableval],
- [MALLOC_ZERO_RETURNS_NULL=auto])
-
-AC_MSG_CHECKING([whether malloc(0) returns NULL])
-if test "x$MALLOC_ZERO_RETURNS_NULL" = xauto; then
- AC_RUN_IFELSE([
-char *malloc();
-char *realloc();
-char *calloc();
-main() {
- char *m0, *r0, *c0, *p;
- m0 = malloc(0);
- p = malloc(10);
- r0 = realloc(p,0);
- c0 = calloc(0);
- exit(m0 == 0 || r0 == 0 || c0 == 0 ? 0 : 1);
-}],
- [MALLOC_ZERO_RETURNS_NULL=yes],
- [MALLOC_ZERO_RETURNS_NULL=no])
-fi
-AC_MSG_RESULT([$MALLOC_ZERO_RETURNS_NULL])
-
-if test "x$MALLOC_ZERO_RETURNS_NULL" = xyes; then
- MALLOC_ZERO_CFLAGS="-DMALLOC_0_RETURNS_NULL"
- XMALLOC_ZERO_CFLAGS=$MALLOC_ZERO_CFLAGS
- XTMALLOC_ZERO_CFLAGS="$MALLOC_ZERO_CFLAGS -DXTMALLOC_BC"
-else
- MALLOC_ZERO_CFLAGS=""
- XMALLOC_ZERO_CFLAGS=""
- XTMALLOC_ZERO_CFLAGS=""
-fi
-
-AC_SUBST([MALLOC_ZERO_CFLAGS])
-AC_SUBST([XMALLOC_ZERO_CFLAGS])
-AC_SUBST([XTMALLOC_ZERO_CFLAGS])
-]) # XORG_CHECK_MALLOC_ZERO
-
-# XORG_WITH_LINT()
-# ----------------
-# Minimum version: 1.1.0
-#
-# Sets up flags for source checkers such as lint and sparse if --with-lint
-# is specified. (Use --with-lint=sparse for sparse.)
-# Sets $LINT to name of source checker passed with --with-lint (default: lint)
-# Sets $LINT_FLAGS to flags to pass to source checker
-# Sets LINT automake conditional if enabled (default: disabled)
-#
-AC_DEFUN([XORG_WITH_LINT],[
-
-# Allow checking code with lint, sparse, etc.
-AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
- [Use a lint-style source code checker (default: disabled)])],
- [use_lint=$withval], [use_lint=no])
-if test "x$use_lint" = "xyes" ; then
- LINT="lint"
-else
- LINT="$use_lint"
-fi
-if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
- case $LINT in
- lint|*/lint)
- case $host_os in
- solaris*)
- LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
- ;;
- esac
- ;;
- esac
-fi
-
-AC_SUBST(LINT)
-AC_SUBST(LINT_FLAGS)
-AM_CONDITIONAL(LINT, [test x$LINT != xno])
-
-]) # XORG_WITH_LINT
-
-# XORG_LINT_LIBRARY(LIBNAME)
-# --------------------------
-# Minimum version: 1.1.0
-#
-# Sets up flags for building lint libraries for checking programs that call
-# functions in the library.
-# Disabled by default, enable with --enable-lint-library
-# Sets:
-# @LINTLIB@ - name of lint library file to make
-# MAKE_LINT_LIB - automake conditional
-#
-
-AC_DEFUN([XORG_LINT_LIBRARY],[
-AC_REQUIRE([XORG_WITH_LINT])
-# Build lint "library" for more indepth checks of programs calling this library
-AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
- [Create lint library (default: disabled)])],
- [make_lint_lib=$enableval], [make_lint_lib=no])
-if test "x$make_lint_lib" != "xno" ; then
- if test "x$LINT" = "xno" ; then
- AC_MSG_ERROR([Cannot make lint library without --with-lint])
- fi
- if test "x$make_lint_lib" = "xyes" ; then
- LINTLIB=llib-l$1.ln
- else
- LINTLIB=$make_lint_lib
- fi
-fi
-AC_SUBST(LINTLIB)
-AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
-
-]) # XORG_LINT_LIBRARY
-
-# XORG_CWARNFLAGS
-# ---------------
-# Minimum version: 1.2.0
-#
-# Defines CWARNFLAGS to enable C compiler warnings.
-#
-AC_DEFUN([XORG_CWARNFLAGS], [
-AC_REQUIRE([AC_PROG_CC])
-if test "x$GCC" = xyes ; then
- CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
--Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
--Wbad-function-cast"
- case `gcc -dumpversion` in
- 3.4.* | 4.*)
- CWARNFLAGS+=" -Wold-style-definition -Wdeclaration-after-statement"
- ;;
- esac
-else
- AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
- if test "x$SUNCC" = "xyes"; then
- CWARNFLAGS="-v"
- fi
-fi
-AC_SUBST(CWARNFLAGS)
-]) # XORG_CWARNFLAGS
-dnl Copyright 2005 Red Hat, Inc
-dnl
-dnl Permission to use, copy, modify, distribute, and sell this software and its
-dnl documentation for any purpose is hereby granted without fee, provided that
-dnl the above copyright notice appear in all copies and that both that
-dnl copyright notice and this permission notice appear in supporting
-dnl documentation.
-dnl
-dnl The above copyright notice and this permission notice shall be included
-dnl in all copies or substantial portions of the Software.
-dnl
-dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-dnl OTHER DEALINGS IN THE SOFTWARE.
-dnl
-dnl Except as contained in this notice, the name of the copyright holders shall
-dnl not be used in advertising or otherwise to promote the sale, use or
-dnl other dealings in this Software without prior written authorization
-dnl from the copyright holders.
-dnl
-
-# XORG_RELEASE_VERSION
-# --------------------
-# Adds --with/without-release-string and changes the PACKAGE and
-# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION". If
-# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged. Also
-# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
-
-AC_DEFUN([XORG_RELEASE_VERSION],[
- AC_ARG_WITH(release-version,
- AC_HELP_STRING([--with-release-version=STRING],
- [Use release version string in package name]),
- [RELEASE_VERSION="$withval"],
- [RELEASE_VERSION=""])
- if test "x$RELEASE_VERSION" != "x"; then
- PACKAGE="$PACKAGE-$RELEASE_VERSION"
- PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
- AC_MSG_NOTICE([Building with package name set to $PACKAGE])
- fi
- AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
- [`echo $PACKAGE_VERSION | cut -d . -f 1`],
- [Major version of this package])
- PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
- if test "x$PVM" = "x"; then
- PVM="0"
- fi
- AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
- [$PVM],
- [Minor version of this package])
- PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
- if test "x$PVP" = "x"; then
- PVP="0"
- fi
- AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
- [$PVP],
- [Patch version of this package])
-])
-
-# XORG_CHANGELOG()
-# ----------------
-# Minimum version: 1.2.0
-#
-# Defines the variable CHANGELOG_CMD as the command to generate
-# ChangeLog from git.
-#
-# Arrange that distcleancheck ignores ChangeLog left over by distclean.
-#
-AC_DEFUN([XORG_CHANGELOG], [
-CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
-mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
-echo 'git directory not found: installing possibly empty changelog.' >&2)"
-AC_SUBST([CHANGELOG_CMD])
-AC_SUBST([distcleancheck_listfiles], ['find . -type f ! -name ChangeLog -print'])
-]) # XORG_CHANGELOG
-
-# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -567,10 +31,10 @@ AC_SUBST([distcleancheck_listfiles], ['find . -type f ! -name ChangeLog -print']
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
+[am__api_version='1.11'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10], [],
+m4_if([$1], [1.11], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -584,10 +48,12 @@ m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
@@ -644,14 +110,14 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 8
+# serial 9
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
@@ -664,6 +130,7 @@ AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -677,14 +144,14 @@ AC_CONFIG_COMMANDS_PRE(
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 9
+# serial 10
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -741,6 +208,16 @@ AC_CACHE_CHECK([dependency style of $depcc],
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
@@ -758,7 +235,17 @@ AC_CACHE_CHECK([dependency style of $depcc],
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
@@ -768,19 +255,23 @@ AC_CACHE_CHECK([dependency style of $depcc],
break
fi
;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
none) break ;;
esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
@@ -837,57 +328,68 @@ _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-#serial 3
+#serial 5
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
done
-done
+}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
@@ -907,13 +409,13 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 12
+# serial 16
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -930,7 +432,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
+[AC_PREREQ([2.62])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -981,8 +483,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
@@ -990,24 +492,37 @@ AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
])
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
@@ -1018,18 +533,19 @@ AC_PROVIDE_IFELSE([AC_PROG_OBJC],
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
+_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
- $1 | $1:* )
+ $_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1040,7 +556,14 @@ echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
@@ -1067,27 +590,38 @@ AC_SUBST([am__leading_dot])])
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 5
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode is disabled by default
- AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
(and sometimes confusing) to the casual installer],
- USE_MAINTAINER_MODE=$enableval,
- USE_MAINTAINER_MODE=no)
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST(MAINT)dnl
+ AC_SUBST([MAINT])dnl
]
)
@@ -1095,13 +629,13 @@ AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
+# serial 4
# AM_MAKE_INCLUDE()
# -----------------
@@ -1110,7 +644,7 @@ AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
- @echo done
+ @echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
@@ -1120,24 +654,24 @@ am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
@@ -1147,14 +681,14 @@ rm -f confinc confmf
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
+# serial 6
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -1171,7 +705,14 @@ AC_SUBST($1)])
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
@@ -1209,13 +750,13 @@ esac
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
+# serial 4
# _AM_MANGLE_OPTION(NAME)
# -----------------------
@@ -1232,7 +773,7 @@ AC_DEFUN([_AM_SET_OPTION],
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
@@ -1242,14 +783,14 @@ AC_DEFUN([_AM_IF_OPTION],
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 5
# AM_SANITY_CHECK
# ---------------
@@ -1258,16 +799,29 @@ AC_DEFUN([AM_SANITY_CHECK],
# Just in case
sleep 1
echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
+ set X `ls -t "$srcdir/configure" conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -1292,6 +846,33 @@ Check your system clock])
fi
AC_MSG_RESULT(yes)])
+# Copyright (C) 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# (`yes' being less verbose, `no' or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules],
+[ --enable-silent-rules less verbose build output (undo: `make V=1')
+ --disable-silent-rules verbose build output (undo: `make V=0')])
+case $enable_silent_rules in
+yes) AM_DEFAULT_VERBOSITY=0;;
+no) AM_DEFAULT_VERBOSITY=1;;
+*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
@@ -1320,18 +901,25 @@ fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006 Free Software Foundation, Inc.
+# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
+# serial 2
+
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
@@ -1473,7 +1061,7 @@ dnl of the copyright holder.
# See the "minimum version" comment for each macro you use to see what
# version you require.
m4_defun([XORG_MACROS_VERSION],[
-m4_define([vers_have], [1.2.2])
+m4_define([vers_have], [1.3.0])
m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
m4_if(m4_cmp(maj_have, maj_needed), 0,,
@@ -1749,7 +1337,7 @@ AC_SUBST(MAKE_HTML)
# their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
AC_DEFUN([XORG_CHECK_MALLOC_ZERO],[
AC_ARG_ENABLE(malloc0returnsnull,
- AC_HELP_STRING([--enable-malloc0returnsnull],
+ AS_HELP_STRING([--enable-malloc0returnsnull],
[malloc(0) returns NULL (default: auto)]),
[MALLOC_ZERO_RETURNS_NULL=$enableval],
[MALLOC_ZERO_RETURNS_NULL=auto])
@@ -1801,7 +1389,7 @@ AC_SUBST([XTMALLOC_ZERO_CFLAGS])
AC_DEFUN([XORG_WITH_LINT],[
# Allow checking code with lint, sparse, etc.
-AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
+AC_ARG_WITH(lint, [AS_HELP_STRING([--with-lint],
[Use a lint-style source code checker (default: disabled)])],
[use_lint=$withval], [use_lint=no])
if test "x$use_lint" = "xyes" ; then
@@ -1842,7 +1430,7 @@ AM_CONDITIONAL(LINT, [test x$LINT != xno])
AC_DEFUN([XORG_LINT_LIBRARY],[
AC_REQUIRE([XORG_WITH_LINT])
# Build lint "library" for more indepth checks of programs calling this library
-AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
+AC_ARG_ENABLE(lint-library, [AS_HELP_STRING([--enable-lint-library],
[Create lint library (default: disabled)])],
[make_lint_lib=$enableval], [make_lint_lib=no])
if test "x$make_lint_lib" != "xno" ; then
@@ -1884,7 +1472,51 @@ else
fi
fi
AC_SUBST(CWARNFLAGS)
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
]) # XORG_CWARNFLAGS
+
+# XORG_STRICT_OPTION
+# -----------------------
+# Minimum version: 1.3.0
+#
+# Add configure option to enable strict compilation
+AC_DEFUN([XORG_STRICT_OPTION], [
+AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_CC_C99])
+AC_REQUIRE([XORG_CWARNFLAGS])
+
+AC_ARG_ENABLE(strict-compilation,
+ AS_HELP_STRING([--enable-strict-compilation],
+ [Enable all warnings from compiler and make them errors (default: disabled)]),
+ [STRICT_COMPILE=$enableval], [STRICT_COMPILE=no])
+if test "x$STRICT_COMPILE" = "xyes"; then
+ AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+ AC_CHECK_DECL([__INTEL_COMPILER], [INTELCC="yes"], [INTELCC="no"])
+ if test "x$GCC" = xyes ; then
+ STRICT_CFLAGS="-pedantic -Werror"
+ elif test "x$SUNCC" = "xyes"; then
+ STRICT_CFLAGS="-errwarn"
+ elif test "x$INTELCC" = "xyes"; then
+ STRICT_CFLAGS="-Werror"
+ fi
+fi
+CWARNFLAGS="$CWARNFLAGS $STRICT_CFLAGS"
+AC_SUBST([CWARNFLAGS])
+]) # XORG_STRICT_OPTION
+
+# XORG_DEFAULT_OPTIONS
+# --------------------
+# Minimum version: 1.3.0
+#
+# Defines default options for X.Org modules.
+#
+AC_DEFUN([XORG_DEFAULT_OPTIONS], [
+XORG_CWARNFLAGS
+XORG_STRICT_OPTION
+XORG_RELEASE_VERSION
+XORG_CHANGELOG
+XORG_MANPAGE_SECTIONS
+]) # XORG_DEFAULT_OPTIONS
dnl Copyright 2005 Red Hat, Inc
dnl
dnl Permission to use, copy, modify, distribute, and sell this software and its
@@ -1919,7 +1551,7 @@ dnl
AC_DEFUN([XORG_RELEASE_VERSION],[
AC_ARG_WITH(release-version,
- AC_HELP_STRING([--with-release-version=STRING],
+ AS_HELP_STRING([--with-release-version=STRING],
[Use release version string in package name]),
[RELEASE_VERSION="$withval"],
[RELEASE_VERSION=""])
diff --git a/X11/xtrans/config.guess b/X11/xtrans/config.guess
new file mode 100644
index 000000000..da8331460
--- /dev/null
+++ b/X11/xtrans/config.guess
@@ -0,0 +1,1561 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# Free Software Foundation, Inc.
+
+timestamp='2009-04-27'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[456])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep __LP64__ >/dev/null
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ case ${UNAME_MACHINE} in
+ pc98)
+ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:[3456]*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ EM64T | authenticamd | genuineintel)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ mips:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips
+ #undef mipsel
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mipsel
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+ /^CPU/{
+ s: ::g
+ p
+ }'`"
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips64
+ #undef mips64el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mips64el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips64
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+ /^CPU/{
+ s: ::g
+ p
+ }'`"
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:Linux:*:*)
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+ # Set LC_ALL=C to ensure ld outputs messages in English.
+ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+ | sed -ne '/supported targets:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported targets: *//
+ s/ .*//
+ p'`
+ case "$ld_supported_targets" in
+ elf32-i386)
+ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ ;;
+ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit ;;
+ "")
+ # Either a pre-BFD a.out linker (linux-gnuoldld) or
+ # one that does not give us useful --help.
+ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+ exit ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #ifdef __ELF__
+ # ifdef __GLIBC__
+ # if __GLIBC__ >= 2
+ LIBC=gnu
+ # else
+ LIBC=gnulibc1
+ # endif
+ # else
+ LIBC=gnulibc1
+ # endif
+ #else
+ #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+ LIBC=gnu
+ #else
+ LIBC=gnuaout
+ #endif
+ #endif
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+ /^LIBC/{
+ s: ::g
+ p
+ }'`"
+ test x"${LIBC}" != x && {
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit
+ }
+ test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+ ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ c34*)
+ echo c34-convex-bsd
+ exit ;;
+ c38*)
+ echo c38-convex-bsd
+ exit ;;
+ c4*)
+ echo c4-convex-bsd
+ exit ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/X11/xtrans/config.sub b/X11/xtrans/config.sub
new file mode 100644
index 000000000..a39437d01
--- /dev/null
+++ b/X11/xtrans/config.sub
@@ -0,0 +1,1686 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# Free Software Foundation, Inc.
+
+timestamp='2009-04-17'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray)
+ os=
+ basic_machine=$1
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
+ | v850 | v850e \
+ | we32k \
+ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+ | tron-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
+ tic55x | c55x*)
+ basic_machine=tic55x-unknown
+ os=-coff
+ ;;
+ tic6x | c6x*)
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
+ tile*)
+ basic_machine=tile-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -kopensolaris* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/X11/xtrans/configure b/X11/xtrans/configure
index 6cce58999..584825ad0 100644
--- a/X11/xtrans/configure
+++ b/X11/xtrans/configure
@@ -1,11 +1,11 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for xtrans 1.2.4.
+# Generated by GNU Autoconf 2.63 for xtrans 1.2.5.
#
# Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
@@ -17,7 +17,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
@@ -39,17 +39,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
else
- PATH_SEPARATOR=:
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
fi
- rm -f conf$$.sh
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
fi
# Support unset when possible.
@@ -65,8 +93,6 @@ fi
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
-as_nl='
-'
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
@@ -89,7 +115,7 @@ if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
{ (exit 1); exit 1; }
fi
@@ -102,17 +128,10 @@ PS2='> '
PS4='+ '
# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -134,7 +153,7 @@ as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
@@ -160,7 +179,7 @@ else
as_have_required=no
fi
- if test $as_have_required = yes && (eval ":
+ if test $as_have_required = yes && (eval ":
(as_func_return () {
(exit \$1)
}
@@ -242,7 +261,7 @@ IFS=$as_save_IFS
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
@@ -263,7 +282,7 @@ _ASEOF
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
@@ -343,10 +362,10 @@ fi
if test "x$CONFIG_SHELL" != x; then
for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
fi
@@ -415,9 +434,10 @@ fi
test \$exitcode = 0") || {
echo No shell found that supports shell functions.
- echo Please tell autoconf@gnu.org about your system,
- echo including any error possibly output before this
- echo message
+ echo Please tell bug-autoconf@gnu.org about your system,
+ echo including any error possibly output before this message.
+ echo This can help us improve future autoconf versions.
+ echo Configuration will now proceed without shell functions.
}
@@ -453,7 +473,7 @@ test \$exitcode = 0") || {
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
@@ -481,7 +501,6 @@ case `echo -n x` in
*)
ECHO_N='-n';;
esac
-
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -494,19 +513,22 @@ if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
+ fi
else
as_ln_s='cp -p'
fi
@@ -531,10 +553,10 @@ else
as_test_x='
eval sh -c '\''
if test -d "$1"; then
- test -d "$1/.";
+ test -d "$1/.";
else
case $1 in
- -*)set "./$1";;
+ -*)set "./$1";;
esac;
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
???[sx]*):;;*)false;;esac;fi
@@ -574,95 +596,175 @@ SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME='xtrans'
PACKAGE_TARNAME='xtrans'
-PACKAGE_VERSION='1.2.4'
-PACKAGE_STRING='xtrans 1.2.4'
+PACKAGE_VERSION='1.2.5'
+PACKAGE_STRING='xtrans 1.2.5'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-am__isrc
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-MAINTAINER_MODE_TRUE
-MAINTAINER_MODE_FALSE
-MAINT
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-fchown_define
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+HAVE_PS2PDF_FALSE
+HAVE_PS2PDF_TRUE
+BUILD_DOCS_FALSE
+BUILD_DOCS_TRUE
+PS2PDF
+GROFF
sticky_bit_define
-CHANGELOG_CMD
+fchown_define
+ADMIN_MAN_DIR
+DRIVER_MAN_DIR
+MISC_MAN_DIR
+FILE_MAN_DIR
+LIB_MAN_DIR
+APP_MAN_DIR
+ADMIN_MAN_SUFFIX
+DRIVER_MAN_SUFFIX
+MISC_MAN_SUFFIX
+FILE_MAN_SUFFIX
+LIB_MAN_SUFFIX
+APP_MAN_SUFFIX
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
distcleancheck_listfiles
-LIBOBJS
-LTLIBOBJS'
+CHANGELOG_CMD
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+CWARNFLAGS
+EGREP
+GREP
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_dependency_tracking
+enable_silent_rules
+enable_strict_compilation
+with_release_version
+enable_docs
+'
ac_precious_vars='build_alias
host_alias
target_alias
@@ -670,12 +772,15 @@ CC
CFLAGS
LDFLAGS
LIBS
-CPPFLAGS'
+CPPFLAGS
+CPP'
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
@@ -774,13 +879,21 @@ do
datarootdir=$ac_optarg ;;
-disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
- eval enable_$ac_feature=no ;;
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
@@ -793,13 +906,21 @@ do
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
- eval enable_$ac_feature=\$ac_optarg ;;
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -990,22 +1111,38 @@ do
ac_init_version=: ;;
-with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
- eval with_$ac_package=\$ac_optarg ;;
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
-without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
- eval with_$ac_package=no ;;
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
--x)
# Obsolete; use --with-x.
@@ -1025,7 +1162,7 @@ do
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { echo "$as_me: error: unrecognized option: $ac_option
+ -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
;;
@@ -1034,16 +1171,16 @@ Try \`$0 --help' for more information." >&2
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
@@ -1052,22 +1189,38 @@ done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
+ { $as_echo "$as_me: error: missing argument to $ac_option" >&2
{ (exit 1); exit 1; }; }
fi
-# Be sure to have absolute directory names.
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+ { (exit 1); exit 1; }; } ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
libdir localedir mandir
do
eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
case $ac_val in
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
{ (exit 1); exit 1; }; }
done
@@ -1082,7 +1235,7 @@ target=$target_alias
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
@@ -1098,10 +1251,10 @@ test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { echo "$as_me: error: Working directory cannot be determined" >&2
+ { $as_echo "$as_me: error: working directory cannot be determined" >&2
{ (exit 1); exit 1; }; }
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
{ (exit 1); exit 1; }; }
@@ -1109,12 +1262,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -1141,12 +1294,12 @@ else
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
{ (exit 1); exit 1; }; }
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+ cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
{ (exit 1); exit 1; }; }
pwd)`
# When building in place, set srcdir=.
@@ -1173,7 +1326,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures xtrans 1.2.4 to adapt to many kinds of systems.
+\`configure' configures xtrans 1.2.5 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1195,9 +1348,9 @@ Configuration:
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
+ [$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
+ [PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
@@ -1207,25 +1360,25 @@ for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/xtrans]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/xtrans]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
@@ -1234,22 +1387,33 @@ Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
_ACEOF
fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of xtrans 1.2.4:";;
+ short | recursive ) echo "Configuration of xtrans 1.2.5:";;
esac
cat <<\_ACEOF
Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
+ --enable-silent-rules less verbose build output (undo: `make V=1')
+ --disable-silent-rules verbose build output (undo: `make V=0')
+ --enable-strict-compilation
+ Enable all warnings from compiler and make them
+ errors (default: disabled)
+ --enable-docs Enable building of documentation
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -1265,6 +1429,7 @@ Some influential environment variables:
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
@@ -1277,15 +1442,17 @@ fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" || continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -1321,7 +1488,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
echo &&
$SHELL "$ac_srcdir/configure" --help=recursive
else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi || ac_status=$?
cd "$ac_pwd" || { ac_status=$?; break; }
done
@@ -1330,11 +1497,11 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-xtrans configure 1.2.4
-generated by GNU Autoconf 2.61
+xtrans configure 1.2.5
+generated by GNU Autoconf 2.63
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
@@ -1344,8 +1511,8 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by xtrans $as_me 1.2.4, which was
-generated by GNU Autoconf 2.61. Invocation command line was
+It was created by xtrans $as_me 1.2.5, which was
+generated by GNU Autoconf 2.63. Invocation command line was
$ $0 $@
@@ -1381,7 +1548,7 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
+ $as_echo "PATH: $as_dir"
done
IFS=$as_save_IFS
@@ -1416,7 +1583,7 @@ do
| -silent | --silent | --silen | --sile | --sil)
continue ;;
*\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -1468,11 +1635,12 @@ _ASBOX
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) $as_unset $ac_var ;;
esac ;;
esac
@@ -1502,9 +1670,9 @@ _ASBOX
do
eval ac_val=\$$ac_var
case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
- echo "$ac_var='\''$ac_val'\''"
+ $as_echo "$ac_var='\''$ac_val'\''"
done | sort
echo
@@ -1519,9 +1687,9 @@ _ASBOX
do
eval ac_val=\$$ac_var
case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
- echo "$ac_var='\''$ac_val'\''"
+ $as_echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
@@ -1537,8 +1705,8 @@ _ASBOX
echo
fi
test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
} >&5
rm -f core *.core core.conftest.* &&
rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
@@ -1580,21 +1748,24 @@ _ACEOF
# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
- set x "$CONFIG_SITE"
+ ac_site_file1=$CONFIG_SITE
elif test "x$prefix" != xNONE; then
- set x "$prefix/share/config.site" "$prefix/etc/config.site"
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
else
- set x "$ac_default_prefix/share/config.site" \
- "$ac_default_prefix/etc/config.site"
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
fi
-shift
-for ac_site_file
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
+ test "x$ac_site_file" = xNONE && continue
if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+ { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
fi
@@ -1604,16 +1775,16 @@ if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+ { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
*) . "./$cache_file";;
esac
fi
else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+ { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
@@ -1627,29 +1798,38 @@ for ac_var in $ac_precious_vars; do
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
@@ -1659,10 +1839,12 @@ echo "$as_me: current value: $ac_new_val" >&2;}
fi
done
if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1697,7 +1879,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-am__api_version='1.10'
+am__api_version='1.11'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -1716,8 +1898,8 @@ for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
fi
done
if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+ { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1743,11 +1925,12 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -1776,17 +1959,29 @@ case $as_dir/ in
# program-specific install script used by HP pwplus--don't use.
:
else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
fi
fi
done
done
;;
esac
+
done
IFS=$as_save_IFS
+rm -rf conftest.one conftest.two conftest.dir
fi
if test "${ac_cv_path_install+set}" = set; then
@@ -1799,8 +1994,8 @@ fi
INSTALL=$ac_install_sh
fi
fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
@@ -1810,21 +2005,38 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
# Just in case
sleep 1
echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
+
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
+ set X `ls -t "$srcdir/configure" conftest.file`
fi
rm -f conftest.file
if test "$*" != "X $srcdir/configure conftest.file" \
@@ -1834,9 +2046,9 @@ if (
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+ { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1847,45 +2059,158 @@ then
# Ok.
:
else
- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+ { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $. echo might interpret backslashes.
+# Double any \ or $.
# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
if test "${ac_cv_path_mkdir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
@@ -1920,8 +2245,8 @@ fi
MKDIR_P="$ac_install_sh -d"
fi
fi
-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-echo "${ECHO_T}$MKDIR_P" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
mkdir_p="$MKDIR_P"
case $mkdir_p in
@@ -1933,10 +2258,10 @@ for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -1949,7 +2274,7 @@ do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -1960,22 +2285,23 @@ fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
+ { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
test -n "$AWK" && break
done
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
SHELL = /bin/sh
@@ -1992,12 +2318,12 @@ esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+ { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
SET_MAKE=
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
@@ -2016,8 +2342,8 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
@@ -2034,7 +2360,7 @@ fi
# Define the identity of the package.
PACKAGE='xtrans'
- VERSION='1.2.4'
+ VERSION='1.2.5'
cat >>confdefs.h <<_ACEOF
@@ -2062,112 +2388,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
# Always define AMTAR for backward compatibility.
@@ -2180,8 +2400,9 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
@@ -2189,8 +2410,8 @@ else
USE_MAINTAINER_MODE=no
fi
- { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
+ { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
if test $USE_MAINTAINER_MODE = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
@@ -2203,9 +2424,7 @@ fi
-# Require xorg-macros version 1.2.0 or newer for XORG_CHANGELOG macro
-
-
+# Require xorg-macros 1.3 or later: XORG_DEFAULT_OPTIONS
@@ -2216,10 +2435,6 @@ fi
-# Because xtrans is included into other modules rather than being linked
-# with, these defines have to be added to the cflags line
-
-# fchown()
DEPDIR="${am__leading_dot}deps"
@@ -2229,40 +2444,40 @@ ac_config_commands="$ac_config_commands depfiles"
am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
- @echo done
+ @echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
-{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
fi
-{ echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
rm -f confinc confmf
# Check whether --enable-dependency-tracking was given.
@@ -2291,10 +2506,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2307,7 +2522,7 @@ do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2318,11 +2533,11 @@ fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
@@ -2331,10 +2546,10 @@ if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -2347,7 +2562,7 @@ do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2358,11 +2573,11 @@ fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
if test "x$ac_ct_CC" = x; then
@@ -2370,12 +2585,8 @@ fi
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
@@ -2388,10 +2599,10 @@ if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2404,7 +2615,7 @@ do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2415,11 +2626,11 @@ fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
@@ -2428,10 +2639,10 @@ fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2449,7 +2660,7 @@ do
continue
fi
ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2472,11 +2683,11 @@ fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
@@ -2487,10 +2698,10 @@ if test -z "$CC"; then
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -2503,7 +2714,7 @@ do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2514,11 +2725,11 @@ fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
@@ -2531,10 +2742,10 @@ if test -z "$CC"; then
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -2547,7 +2758,7 @@ do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
@@ -2558,11 +2769,11 @@ fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
@@ -2574,12 +2785,8 @@ done
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
@@ -2589,44 +2796,50 @@ fi
fi
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
+$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
+$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
{ (ac_try="$ac_compiler --version >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compiler --version >&5") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
{ (ac_try="$ac_compiler -v >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compiler -v >&5") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
{ (ac_try="$ac_compiler -V >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compiler -V >&5") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
cat >conftest.$ac_ext <<_ACEOF
@@ -2645,27 +2858,22 @@ main ()
}
_ACEOF
ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort. b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions. Remove them first so a
-# subsequent execution test works.
+{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
ac_rmfiles=
for ac_file in $ac_files
do
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
* ) ac_rmfiles="$ac_rmfiles $ac_file";;
esac
done
@@ -2676,10 +2884,11 @@ case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_link_default") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
# Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
@@ -2690,7 +2899,7 @@ for ac_file in $ac_files ''
do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
;;
[ab].out )
# We found the default executable, but exeext='' is most
@@ -2717,25 +2926,27 @@ else
ac_file=''
fi
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
if test -z "$ac_file"; then
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
+$as_echo "$as_me: error: C compiler cannot create executables
See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
+ { (exit 77); exit 77; }; }; }
fi
ac_exeext=$ac_cv_exeext
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
@@ -2744,49 +2955,53 @@ if test "$cross_compiling" != yes; then
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_try") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
+$as_echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
fi
fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_link") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
@@ -2795,31 +3010,33 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
break;;
* ) break;;
esac
done
else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2842,40 +3059,43 @@ case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compile") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
for ac_file in conftest.o conftest.obj conftest.*; do
test -f "$ac_file" || continue;
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
+$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2901,20 +3121,21 @@ case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_compiler_gnu=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_compiler_gnu=no
@@ -2924,15 +3145,19 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
ac_c_werror_flag=yes
@@ -2959,20 +3184,21 @@ case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_cc_g=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
CFLAGS=""
@@ -2997,20 +3223,21 @@ case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
:
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_c_werror_flag=$ac_save_c_werror_flag
@@ -3036,20 +3263,21 @@ case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_cc_g=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -3064,8 +3292,8 @@ fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_c_werror_flag=$ac_save_c_werror_flag
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
@@ -3081,10 +3309,10 @@ else
CFLAGS=
fi
fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c89=no
ac_save_CC=$CC
@@ -3155,20 +3383,21 @@ case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_cc_c89=$ac_arg
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -3184,15 +3413,15 @@ fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
+ { $as_echo "$as_me:$LINENO: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
+ { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
*)
CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+ { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
@@ -3204,10 +3433,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
depcc="$CC" am_compiler_list=
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
@@ -3232,6 +3461,11 @@ else
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
@@ -3249,7 +3483,17 @@ else
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
@@ -3259,19 +3503,23 @@ else
break
fi
;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
none) break ;;
esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
@@ -3295,8 +3543,8 @@ else
fi
fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
if
@@ -3311,10 +3559,1274 @@ fi
-{ echo "$as_me:$LINENO: checking for fchown" >&5
-echo $ECHO_N "checking for fchown... $ECHO_C" >&6; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ :
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ # Broken: success on invalid input.
+continue
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ :
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ # Broken: success on invalid input.
+continue
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_stdc=yes
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_header_stdc=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -rf conftest.dSYM
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
+$as_echo_n "checking for $ac_header... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ eval "$as_ac_Header=yes"
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_Header=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+ac_res=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+as_val=`eval 'as_val=${'$as_ac_Header'}
+ $as_echo "$as_val"'`
+ if test "x$as_val" = x""yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+ { $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C99" >&5
+$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
+if test "${ac_cv_prog_cc_c99+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c99=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <wchar.h>
+#include <stdio.h>
+
+// Check varargs macros. These examples are taken from C99 6.10.3.5.
+#define debug(...) fprintf (stderr, __VA_ARGS__)
+#define showlist(...) puts (#__VA_ARGS__)
+#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
+static void
+test_varargs_macros (void)
+{
+ int x = 1234;
+ int y = 5678;
+ debug ("Flag");
+ debug ("X = %d\n", x);
+ showlist (The first, second, and third items.);
+ report (x>y, "x is %d but y is %d", x, y);
+}
+
+// Check long long types.
+#define BIG64 18446744073709551615ull
+#define BIG32 4294967295ul
+#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
+#if !BIG_OK
+ your preprocessor is broken;
+#endif
+#if BIG_OK
+#else
+ your preprocessor is broken;
+#endif
+static long long int bignum = -9223372036854775807LL;
+static unsigned long long int ubignum = BIG64;
+
+struct incomplete_array
+{
+ int datasize;
+ double data[];
+};
+
+struct named_init {
+ int number;
+ const wchar_t *name;
+ double average;
+};
+
+typedef const char *ccp;
+
+static inline int
+test_restrict (ccp restrict text)
+{
+ // See if C++-style comments work.
+ // Iterate through items via the restricted pointer.
+ // Also check for declarations in for loops.
+ for (unsigned int i = 0; *(text+i) != '\0'; ++i)
+ continue;
+ return 0;
+}
+
+// Check varargs and va_copy.
+static void
+test_varargs (const char *format, ...)
+{
+ va_list args;
+ va_start (args, format);
+ va_list args_copy;
+ va_copy (args_copy, args);
+
+ const char *str;
+ int number;
+ float fnumber;
+
+ while (*format)
+ {
+ switch (*format++)
+ {
+ case 's': // string
+ str = va_arg (args_copy, const char *);
+ break;
+ case 'd': // int
+ number = va_arg (args_copy, int);
+ break;
+ case 'f': // float
+ fnumber = va_arg (args_copy, double);
+ break;
+ default:
+ break;
+ }
+ }
+ va_end (args_copy);
+ va_end (args);
+}
+
+int
+main ()
+{
+
+ // Check bool.
+ _Bool success = false;
+
+ // Check restrict.
+ if (test_restrict ("String literal") == 0)
+ success = true;
+ char *restrict newvar = "Another string";
+
+ // Check varargs.
+ test_varargs ("s, d' f .", "string", 65, 34.234);
+ test_varargs_macros ();
+
+ // Check flexible array members.
+ struct incomplete_array *ia =
+ malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
+ ia->datasize = 10;
+ for (int i = 0; i < ia->datasize; ++i)
+ ia->data[i] = i * 1.234;
+
+ // Check named initializers.
+ struct named_init ni = {
+ .number = 34,
+ .name = L"Test wide string",
+ .average = 543.34343,
+ };
+
+ ni.number = 58;
+
+ int dynamic_array[ni.number];
+ dynamic_array[ni.number - 1] = 543;
+
+ // work around unused variable warnings
+ return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
+ || dynamic_array[ni.number - 1] != 543);
+
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c99=$ac_arg
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c99" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c99" in
+ x)
+ { $as_echo "$as_me:$LINENO: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c99"
+ { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c99" >&5
+$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
+esac
+
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+$as_echo "$as_me: error: invalid value of canonical build" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+$as_echo "$as_me: error: invalid value of canonical host" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+
+
+if test "x$GCC" = xyes ; then
+ CWARNFLAGS="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes \
+-Wmissing-declarations -Wnested-externs -fno-strict-aliasing \
+-Wbad-function-cast"
+ case `$CC -dumpversion` in
+ 3.4.* | 4.*)
+ CWARNFLAGS="$CWARNFLAGS -Wold-style-definition -Wdeclaration-after-statement"
+ ;;
+ esac
+else
+ { $as_echo "$as_me:$LINENO: checking whether __SUNPRO_C is declared" >&5
+$as_echo_n "checking whether __SUNPRO_C is declared... " >&6; }
+if test "${ac_cv_have_decl___SUNPRO_C+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+#ifndef __SUNPRO_C
+ (void) __SUNPRO_C;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl___SUNPRO_C=yes
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_have_decl___SUNPRO_C=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___SUNPRO_C" >&5
+$as_echo "$ac_cv_have_decl___SUNPRO_C" >&6; }
+if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then
+ SUNCC="yes"
+else
+ SUNCC="no"
+fi
+
+ if test "x$SUNCC" = "xyes"; then
+ CWARNFLAGS="-v"
+ fi
+fi
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in
+yes) AM_DEFAULT_VERBOSITY=0;;
+no) AM_DEFAULT_VERBOSITY=1;;
+*) AM_DEFAULT_VERBOSITY=0;;
+esac
+AM_BACKSLASH='\'
+
+
+
+
+
+
+
+# Check whether --enable-strict-compilation was given.
+if test "${enable_strict_compilation+set}" = set; then
+ enableval=$enable_strict_compilation; STRICT_COMPILE=$enableval
+else
+ STRICT_COMPILE=no
+fi
+
+if test "x$STRICT_COMPILE" = "xyes"; then
+ { $as_echo "$as_me:$LINENO: checking whether __SUNPRO_C is declared" >&5
+$as_echo_n "checking whether __SUNPRO_C is declared... " >&6; }
+if test "${ac_cv_have_decl___SUNPRO_C+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+#ifndef __SUNPRO_C
+ (void) __SUNPRO_C;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl___SUNPRO_C=yes
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_have_decl___SUNPRO_C=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___SUNPRO_C" >&5
+$as_echo "$ac_cv_have_decl___SUNPRO_C" >&6; }
+if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then
+ SUNCC="yes"
+else
+ SUNCC="no"
+fi
+
+ { $as_echo "$as_me:$LINENO: checking whether __INTEL_COMPILER is declared" >&5
+$as_echo_n "checking whether __INTEL_COMPILER is declared... " >&6; }
+if test "${ac_cv_have_decl___INTEL_COMPILER+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+#ifndef __INTEL_COMPILER
+ (void) __INTEL_COMPILER;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl___INTEL_COMPILER=yes
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_have_decl___INTEL_COMPILER=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl___INTEL_COMPILER" >&5
+$as_echo "$ac_cv_have_decl___INTEL_COMPILER" >&6; }
+if test "x$ac_cv_have_decl___INTEL_COMPILER" = x""yes; then
+ INTELCC="yes"
+else
+ INTELCC="no"
+fi
+
+ if test "x$GCC" = xyes ; then
+ STRICT_CFLAGS="-pedantic -Werror"
+ elif test "x$SUNCC" = "xyes"; then
+ STRICT_CFLAGS="-errwarn"
+ elif test "x$INTELCC" = "xyes"; then
+ STRICT_CFLAGS="-Werror"
+ fi
+fi
+CWARNFLAGS="$CWARNFLAGS $STRICT_CFLAGS"
+
+
+
+
+# Check whether --with-release-version was given.
+if test "${with_release_version+set}" = set; then
+ withval=$with_release_version; RELEASE_VERSION="$withval"
+else
+ RELEASE_VERSION=""
+fi
+
+ if test "x$RELEASE_VERSION" != "x"; then
+ PACKAGE="$PACKAGE-$RELEASE_VERSION"
+ PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
+ { $as_echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
+$as_echo "$as_me: Building with package name set to $PACKAGE" >&6;}
+ fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1`
+_ACEOF
+
+ PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
+ if test "x$PVM" = "x"; then
+ PVM="0"
+ fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_MINOR $PVM
+_ACEOF
+
+ PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
+ if test "x$PVP" = "x"; then
+ PVP="0"
+ fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION_PATCHLEVEL $PVP
+_ACEOF
+
+
+
+CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
+mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
+echo 'git directory not found: installing possibly empty changelog.' >&2)"
+
+distcleancheck_listfiles='find . -type f ! -name ChangeLog -print'
+
+
+
+
+
+if test x$APP_MAN_SUFFIX = x ; then
+ APP_MAN_SUFFIX=1
+fi
+if test x$APP_MAN_DIR = x ; then
+ APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)'
+fi
+
+if test x$LIB_MAN_SUFFIX = x ; then
+ LIB_MAN_SUFFIX=3
+fi
+if test x$LIB_MAN_DIR = x ; then
+ LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)'
+fi
+
+if test x$FILE_MAN_SUFFIX = x ; then
+ case $host_os in
+ solaris*) FILE_MAN_SUFFIX=4 ;;
+ *) FILE_MAN_SUFFIX=5 ;;
+ esac
+fi
+if test x$FILE_MAN_DIR = x ; then
+ FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)'
+fi
+
+if test x$MISC_MAN_SUFFIX = x ; then
+ case $host_os in
+ solaris*) MISC_MAN_SUFFIX=5 ;;
+ *) MISC_MAN_SUFFIX=7 ;;
+ esac
+fi
+if test x$MISC_MAN_DIR = x ; then
+ MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)'
+fi
+
+if test x$DRIVER_MAN_SUFFIX = x ; then
+ case $host_os in
+ solaris*) DRIVER_MAN_SUFFIX=7 ;;
+ *) DRIVER_MAN_SUFFIX=4 ;;
+ esac
+fi
+if test x$DRIVER_MAN_DIR = x ; then
+ DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)'
+fi
+
+if test x$ADMIN_MAN_SUFFIX = x ; then
+ case $host_os in
+ solaris*) ADMIN_MAN_SUFFIX=1m ;;
+ *) ADMIN_MAN_SUFFIX=8 ;;
+ esac
+fi
+if test x$ADMIN_MAN_DIR = x ; then
+ ADMIN_MAN_DIR='$(mandir)/man$(ADMIN_MAN_SUFFIX)'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Because xtrans is included into other modules rather than being linked
+# with, these defines have to be added to the cflags line
+
+# fchown()
+
+{ $as_echo "$as_me:$LINENO: checking for fchown" >&5
+$as_echo_n "checking for fchown... " >&6; }
if test "${ac_cv_func_fchown+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+ $as_echo_n "(cached) " >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -3367,32 +4879,36 @@ case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then
ac_cv_func_fchown=yes
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_fchown=no
fi
+rm -rf conftest.dSYM
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_fchown" >&5
-echo "${ECHO_T}$ac_cv_func_fchown" >&6; }
-if test $ac_cv_func_fchown = yes; then
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_fchown" >&5
+$as_echo "$ac_cv_func_fchown" >&6; }
+if test "x$ac_cv_func_fchown" = x""yes; then
fchown_define="-DHAS_FCHOWN"
else
fchown_define=""
@@ -3410,52 +4926,134 @@ sticky_bit_define="-DHAS_STICKY_DIR_BIT"
+# Documentation is currently provided in troff format, built on request
+for ac_prog in groff
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_GROFF+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ case $GROFF in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GROFF="$GROFF" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_dummy="$PATH:/usr/gnu/bin"
+for as_dir in $as_dummy
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_GROFF="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
-
-# Check whether --with-release-version was given.
-if test "${with_release_version+set}" = set; then
- withval=$with_release_version; RELEASE_VERSION="$withval"
+ ;;
+esac
+fi
+GROFF=$ac_cv_path_GROFF
+if test -n "$GROFF"; then
+ { $as_echo "$as_me:$LINENO: result: $GROFF" >&5
+$as_echo "$GROFF" >&6; }
else
- RELEASE_VERSION=""
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
fi
- if test "x$RELEASE_VERSION" != "x"; then
- PACKAGE="$PACKAGE-$RELEASE_VERSION"
- PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
- { echo "$as_me:$LINENO: Building with package name set to $PACKAGE" >&5
-echo "$as_me: Building with package name set to $PACKAGE" >&6;}
- fi
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION_MAJOR `echo $PACKAGE_VERSION | cut -d . -f 1`
-_ACEOF
+ test -n "$GROFF" && break
+done
+test -n "$GROFF" || GROFF="none"
- PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
- if test "x$PVM" = "x"; then
- PVM="0"
- fi
+for ac_prog in ps2pdf
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_PS2PDF+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ case $PS2PDF in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PS2PDF="$PS2PDF" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_dummy="$PATH:/usr/gnu/bin"
+for as_dir in $as_dummy
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_PS2PDF="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION_MINOR $PVM
-_ACEOF
+ ;;
+esac
+fi
+PS2PDF=$ac_cv_path_PS2PDF
+if test -n "$PS2PDF"; then
+ { $as_echo "$as_me:$LINENO: result: $PS2PDF" >&5
+$as_echo "$PS2PDF" >&6; }
+else
+ { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
- PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
- if test "x$PVP" = "x"; then
- PVP="0"
- fi
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION_PATCHLEVEL $PVP
-_ACEOF
+ test -n "$PS2PDF" && break
+done
+test -n "$PS2PDF" || PS2PDF="none"
+{ $as_echo "$as_me:$LINENO: checking whether to build documentation" >&5
+$as_echo_n "checking whether to build documentation... " >&6; }
+# Check whether --enable-docs was given.
+if test "${enable_docs+set}" = set; then
+ enableval=$enable_docs; build_docs="${enableval}"
+else
+ build_docs="no"
+fi
-CHANGELOG_CMD="(GIT_DIR=\$(top_srcdir)/.git git log > .changelog.tmp && \
-mv .changelog.tmp ChangeLog) || (rm -f .changelog.tmp; touch ChangeLog; \
-echo 'git directory not found: installing possibly empty changelog.' >&2)"
+{ $as_echo "$as_me:$LINENO: result: ${build_docs}" >&5
+$as_echo "${build_docs}" >&6; }
+if test "x${build_docs}" = xyes && test "x${GROFF}" = xnone ; then
+ { { $as_echo "$as_me:$LINENO: error: can't build documentation without groff" >&5
+$as_echo "$as_me: error: can't build documentation without groff" >&2;}
+ { (exit 1); exit 1; }; }
+fi
-distcleancheck_listfiles='find . -type f ! -name ChangeLog -print'
+ if test x$build_docs = xyes; then
+ BUILD_DOCS_TRUE=
+ BUILD_DOCS_FALSE='#'
+else
+ BUILD_DOCS_TRUE='#'
+ BUILD_DOCS_FALSE=
+fi
+ if test x$PS2PDF != xnone; then
+ HAVE_PS2PDF_TRUE=
+ HAVE_PS2PDF_FALSE='#'
+else
+ HAVE_PS2PDF_TRUE='#'
+ HAVE_PS2PDF_FALSE=
+fi
ac_config_files="$ac_config_files Makefile xtrans.pc"
@@ -3487,11 +5085,12 @@ _ACEOF
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
*) $as_unset $ac_var ;;
esac ;;
esac
@@ -3524,12 +5123,12 @@ echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
test "x$cache_file" != "x/dev/null" &&
- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+ { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
@@ -3546,6 +5145,12 @@ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# take arguments), then branch to the quote section. Otherwise,
# look for a macro that doesn't take arguments.
ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
t clear
:clear
s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
@@ -3575,7 +5180,7 @@ ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`echo "$ac_i" | sed "$ac_script"`
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
@@ -3586,34 +5191,57 @@ LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+ { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+ { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
+$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+ { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${BUILD_DOCS_TRUE}" && test -z "${BUILD_DOCS_FALSE}"; then
+ { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_DOCS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"BUILD_DOCS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_PS2PDF_TRUE}" && test -z "${HAVE_PS2PDF_FALSE}"; then
+ { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_PS2PDF\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+$as_echo "$as_me: error: conditional \"HAVE_PS2PDF\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
@@ -3626,7 +5254,7 @@ ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
@@ -3636,7 +5264,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
@@ -3658,17 +5286,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
else
- PATH_SEPARATOR=:
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
fi
- rm -f conf$$.sh
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
fi
# Support unset when possible.
@@ -3684,8 +5340,6 @@ fi
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
-as_nl='
-'
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
@@ -3708,7 +5362,7 @@ if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
{ (exit 1); exit 1; }
fi
@@ -3721,17 +5375,10 @@ PS2='> '
PS4='+ '
# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -3753,7 +5400,7 @@ as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
@@ -3804,7 +5451,7 @@ $as_unset CDPATH
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
@@ -3832,7 +5479,6 @@ case `echo -n x` in
*)
ECHO_N='-n';;
esac
-
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -3845,19 +5491,22 @@ if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
+ fi
else
as_ln_s='cp -p'
fi
@@ -3882,10 +5531,10 @@ else
as_test_x='
eval sh -c '\''
if test -d "$1"; then
- test -d "$1/.";
+ test -d "$1/.";
else
case $1 in
- -*)set "./$1";;
+ -*)set "./$1";;
esac;
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
???[sx]*):;;*)false;;esac;fi
@@ -3907,8 +5556,8 @@ exec 6>&1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by xtrans $as_me 1.2.4, which was
-generated by GNU Autoconf 2.61. Invocation command line was
+This file was extended by xtrans $as_me 1.2.5, which was
+generated by GNU Autoconf 2.63. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -3921,27 +5570,34 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q`
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# Files that config.status was made for.
config_files="$ac_config_files"
config_commands="$ac_config_commands"
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [FILE]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
- -q, --quiet do not print progress messages
+ -q, --quiet, --silent
+ do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
Configuration files:
$config_files
@@ -3952,13 +5608,13 @@ $config_commands
Report bugs to <bug-autoconf@gnu.org>."
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-xtrans config.status 1.2.4
-configured by $0, generated by GNU Autoconf 2.61,
- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+xtrans config.status 1.2.5
+configured by $0, generated by GNU Autoconf 2.63,
+ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -3966,11 +5622,12 @@ ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
@@ -3992,21 +5649,24 @@ do
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- echo "$ac_cs_version"; exit ;;
+ $as_echo "$ac_cs_version"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
ac_need_defaults=false;;
--he | --h | --help | --hel | -h )
- echo "$ac_cs_usage"; exit ;;
+ $as_echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
- -*) { echo "$as_me: error: unrecognized option: $1
+ -*) { $as_echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; } ;;
@@ -4025,27 +5685,29 @@ if $ac_cs_silent; then
fi
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- CONFIG_SHELL=$SHELL
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
export CONFIG_SHELL
- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ exec "\$@"
fi
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
- echo "$ac_log"
+ $as_echo "$ac_log"
} >&5
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#
# INIT-COMMANDS
#
@@ -4053,7 +5715,7 @@ AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Handling of arguments.
for ac_config_target in $ac_config_targets
@@ -4063,8 +5725,8 @@ do
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"xtrans.pc") CONFIG_FILES="$CONFIG_FILES xtrans.pc" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
@@ -4104,149 +5766,144 @@ $debug ||
(umask 077 && mkdir "$tmp")
} ||
{
- echo "$me: cannot create a temporary directory in ." >&2
+ $as_echo "$as_me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then
-_ACEOF
+ac_cr=' '
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-am__isrc!$am__isrc$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
-MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
-MAINT!$MAINT$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-DEPDIR!$DEPDIR$ac_delim
-am__include!$am__include$ac_delim
-am__quote!$am__quote$ac_delim
-AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-CCDEPMODE!$CCDEPMODE$ac_delim
-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-fchown_define!$fchown_define$ac_delim
-sticky_bit_define!$sticky_bit_define$ac_delim
-CHANGELOG_CMD!$CHANGELOG_CMD$ac_delim
-distcleancheck_listfiles!$distcleancheck_listfiles$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
+ . ./conf$$subs.sh ||
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 84; then
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
{ (exit 1); exit 1; }; }
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
+rm -f conf$$subs.sh
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+ { (exit 1); exit 1; }; }
_ACEOF
-
# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
@@ -4262,19 +5919,21 @@ s/^[^=]*=[ ]*$//
}'
fi
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"
-for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS
+eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS"
+shift
+for ac_tag
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
{ (exit 1); exit 1; }; };;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
@@ -4303,26 +5962,38 @@ echo "$as_me: error: Invalid tag $ac_tag." >&2;}
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
{ (exit 1); exit 1; }; };;
esac
- ac_file_inputs="$ac_file_inputs $ac_f"
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ ac_file_inputs="$ac_file_inputs '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
- configure_input="Generated from "`IFS=:
- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
+ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin";;
+ *:-:* | *:-) cat >"$tmp/stdin" \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
;;
esac
@@ -4332,7 +6003,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
+$as_echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -4358,7 +6029,7 @@ echo X"$ac_file" |
as_dirs=
while :; do
case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
@@ -4367,7 +6038,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -4388,17 +6059,17 @@ echo X"$as_dir" |
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -4443,12 +6114,13 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
esac
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
-case `sed -n '/datarootdir/ {
+ac_sed_dataroot='
+/datarootdir/ {
p
q
}
@@ -4457,13 +6129,14 @@ case `sed -n '/datarootdir/ {
/@infodir@/p
/@localedir@/p
/@mandir@/p
-' $ac_file_inputs` in
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_datarootdir_hack='
s&@datadir@&$datadir&g
s&@docdir@&$docdir&g
@@ -4477,15 +6150,16 @@ _ACEOF
# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
+s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
@@ -4496,48 +6170,65 @@ s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; }
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&2;}
rm -f "$tmp/stdin"
case $ac_file in
- -) cat "$tmp/out"; rm -f "$tmp/out";;
- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
- esac
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; }
;;
- :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
+ :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
;;
esac
case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
X"$mf" : 'X\(//\)$' \| \
X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$mf" |
+$as_echo X"$mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -4555,33 +6246,33 @@ echo X"$mf" |
q
}
s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$file" : 'X\(//\)[^/]' \| \
X"$file" : 'X\(//\)$' \| \
X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$file" |
+$as_echo X"$file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -4599,7 +6290,7 @@ echo X"$file" |
q
}
s/.*/./; q'`
- { as_dir=$dirpart/$fdir
+ { as_dir=$dirpart/$fdir
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
@@ -4607,7 +6298,7 @@ echo X"$file" |
as_dirs=
while :; do
case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
@@ -4616,7 +6307,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -4637,13 +6328,14 @@ echo X"$as_dir" |
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
done
-done
+}
;;
esac
@@ -4655,6 +6347,11 @@ _ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
+test $ac_write_fail = 0 ||
+ { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
@@ -4676,4 +6373,8 @@ if test "$no_create" != yes; then
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
diff --git a/X11/xtrans/configure.ac b/X11/xtrans/configure.ac
index 3fcf515c9..45757bfea 100644
--- a/X11/xtrans/configure.ac
+++ b/X11/xtrans/configure.ac
@@ -21,13 +21,15 @@ dnl
dnl Process this file with autoconf to create configure.
AC_PREREQ([2.57])
-AC_INIT(xtrans, 1.2.4, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], xtrans)
+AC_INIT(xtrans, [1.2.5], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], xtrans)
AM_INIT_AUTOMAKE([dist-bzip2])
AM_MAINTAINER_MODE
-# Require xorg-macros version 1.2.0 or newer for XORG_CHANGELOG macro
-m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.2 or later before running autoconf/autogen])])
-XORG_MACROS_VERSION(1.2)
+# Require xorg-macros 1.3 or later: XORG_DEFAULT_OPTIONS
+m4_ifndef([XORG_MACROS_VERSION],
+ [m4_fatal([must install xorg-macros 1.3 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.3)
+XORG_DEFAULT_OPTIONS
# Because xtrans is included into other modules rather than being linked
# with, these defines have to be added to the cflags line
@@ -47,8 +49,21 @@ sticky_bit_define="-DHAS_STICKY_DIR_BIT"
AC_SUBST(sticky_bit_define)
-XORG_RELEASE_VERSION
-XORG_CHANGELOG
+# Documentation is currently provided in troff format, built on request
+AC_PATH_PROGS([GROFF], [groff], [none], [$PATH:/usr/gnu/bin])
+AC_PATH_PROGS([PS2PDF], [ps2pdf], [none], [$PATH:/usr/gnu/bin])
+
+AC_MSG_CHECKING([whether to build documentation])
+AC_ARG_ENABLE(docs, AC_HELP_STRING([--enable-docs],
+ [Enable building of documentation]),
+ [build_docs="${enableval}"], [build_docs="no"])
+AC_MSG_RESULT([${build_docs}])
+if test "x${build_docs}" = xyes && test "x${GROFF}" = xnone ; then
+ AC_MSG_ERROR([can't build documentation without groff])
+fi
+
+AM_CONDITIONAL(BUILD_DOCS, [test x$build_docs = xyes])
+AM_CONDITIONAL(HAVE_PS2PDF, [test x$PS2PDF != xnone])
AC_OUTPUT([Makefile
xtrans.pc])
diff --git a/X11/xtrans/install-sh b/X11/xtrans/install-sh
index 4fbbae7b7..6781b987b 100644
--- a/X11/xtrans/install-sh
+++ b/X11/xtrans/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2006-10-14.15
+scriptversion=2009-04-28.21; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -48,7 +48,7 @@ IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
@@ -58,34 +58,49 @@ fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
-posix_glob=
posix_mkdir=
# Desired mode of installed file.
mode=0755
+chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
-chgrpcmd=
-stripcmd=
+mvcmd=$mvprog
rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
src=
dst=
dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
no_target_directory=
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
@@ -95,65 +110,55 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
- -c) shift
- continue;;
+ -c) ;;
+
+ -C) copy_on_change=true;;
- -d) dir_arg=true
- shift
- continue;;
+ -d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- shift
- shift
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
- continue;;
+ shift;;
-o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
+ shift;;
- -s) stripcmd=$stripprog
- shift
- continue;;
+ -s) stripcmd=$stripprog;;
- -t) dstarg=$2
- shift
- shift
- continue;;
+ -t) dst_arg=$2
+ shift;;
- -T) no_target_directory=true
- shift
- continue;;
+ -T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
@@ -165,21 +170,22 @@ while test $# -ne 0; do
*) break;;
esac
+ shift
done
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
- if test -n "$dstarg"; then
+ if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
+ set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
- dstarg=$arg
+ dst_arg=$arg
done
fi
@@ -224,7 +230,7 @@ for src
do
# Protect names starting with `-'.
case $src in
- -*) src=./$src ;;
+ -*) src=./$src;;
esac
if test -n "$dir_arg"; then
@@ -242,22 +248,22 @@ do
exit 1
fi
- if test -z "$dstarg"; then
+ if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
- dst=$dstarg
+ dst=$dst_arg
# Protect names starting with `-'.
case $dst in
- -*) dst=./$dst ;;
+ -*) dst=./$dst;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
+ echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
@@ -378,26 +384,19 @@ do
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix=/ ;;
- -*) prefix=./ ;;
- *) prefix= ;;
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
esac
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
+ eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
- $posix_glob && set -f
+ $posix_glob set -f
set fnord $dstdir
shift
- $posix_glob && set +f
+ $posix_glob set +f
IFS=$oIFS
prefixes=
@@ -459,41 +458,54 @@ do
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
- || {
- echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- } || exit 1
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
trap '' 0
fi
@@ -503,5 +515,6 @@ done
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
diff --git a/X11/xtrans/missing b/X11/xtrans/missing
index 1c8ff7049..28055d2ae 100644
--- a/X11/xtrans/missing
+++ b/X11/xtrans/missing
@@ -1,10 +1,10 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2006-05-10.23
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@ scriptversion=2006-05-10.23
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -89,6 +87,9 @@ Supported PROGRAM values:
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
@@ -106,15 +107,22 @@ Send bug reports to <bug-automake@gnu.org>."
esac
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
-# the program).
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
case $1 in
- lex|yacc)
+ lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
- tar)
+ tar*)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
@@ -138,7 +146,7 @@ esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case $1 in
+case $program in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -148,7 +156,7 @@ WARNING: \`$1' is $msg. You should only need it if
touch aclocal.m4
;;
- autoconf)
+ autoconf*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
@@ -157,7 +165,7 @@ WARNING: \`$1' is $msg. You should only need it if
touch configure
;;
- autoheader)
+ autoheader*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
@@ -187,7 +195,7 @@ WARNING: \`$1' is $msg. You should only need it if
while read f; do touch "$f"; done
;;
- autom4te)
+ autom4te*)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
@@ -210,7 +218,7 @@ WARNING: \`$1' is needed, but is $msg.
fi
;;
- bison|yacc)
+ bison*|yacc*)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
@@ -240,7 +248,7 @@ WARNING: \`$1' $msg. You should only need it if
fi
;;
- lex|flex)
+ lex*|flex*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
@@ -263,7 +271,7 @@ WARNING: \`$1' is $msg. You should only need it if
fi
;;
- help2man)
+ help2man*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
@@ -277,11 +285,11 @@ WARNING: \`$1' is $msg. You should only need it if
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
- exit 1
+ exit $?
fi
;;
- makeinfo)
+ makeinfo*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -310,7 +318,7 @@ WARNING: \`$1' is $msg. You should only need it if
touch $file
;;
- tar)
+ tar*)
shift
# We have already tried tar in the generic part.
@@ -363,5 +371,6 @@ exit 0
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
diff --git a/X11/xtrans/xtrans.m4 b/X11/xtrans/xtrans.m4
index f6bc2ea1e..b58081ca9 100644
--- a/X11/xtrans/xtrans.m4
+++ b/X11/xtrans/xtrans.m4
@@ -32,7 +32,9 @@ AC_DEFUN([XTRANS_TCP_FLAGS],[
# SVR4 hides these in libraries other than libc
AC_SEARCH_LIBS(socket, [socket])
AC_SEARCH_LIBS(gethostbyname, [nsl])
- AC_HAVE_LIBRARY([ws2_32])
+ if test "$ac_cv_search_socket$ac_cv_search_gethostbyname" = "nono"; then
+ AC_HAVE_LIBRARY([ws2_32])
+ fi
# Needs to come after above checks for libsocket & libnsl for SVR4 systems
AC_ARG_ENABLE(ipv6,