aboutsummaryrefslogtreecommitdiff
path: root/X11
diff options
context:
space:
mode:
Diffstat (limited to 'X11')
-rw-r--r--X11/extensions/XIproto.txt2542
-rw-r--r--X11/extensions/compositeproto.h2
2 files changed, 2544 insertions, 0 deletions
diff --git a/X11/extensions/XIproto.txt b/X11/extensions/XIproto.txt
new file mode 100644
index 000000000..20cc02a03
--- /dev/null
+++ b/X11/extensions/XIproto.txt
@@ -0,0 +1,2542 @@
+ X11 Input Extension Protocol Specification
+ Version 1.0
+ X Consortium Standard
+ X Version 11, Release 6.8
+ Mark Patrick, Ardent Computer
+ George Sachs, Hewlett-Packard
+
+ Version 1.5
+ Peter Hutterer
+
+ Copyright © 1989, 1990, 1991 by Hewlett-Packard Company and
+ Ardent Computer
+
+ Permission to use, copy, modify, and distribute this
+ documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice and this
+ permission notice appear in all copies. Ardent and
+ Hewlett-Packard make no representations about the suitability
+ for any purpose of the information in this document. It is
+ provided "as is" without express or implied warranty. Copyright
+ © 1989, 1990, 1991, 1992 X Consortium
+
+ Permission is hereby granted, free of charge, to any person
+ obtaining a copy of this software and associated documentation
+ files (the “Software”), to deal in the Software without
+ restriction, including without limitation the rights to use,
+ copy, modify, merge, publish, distribute, sublicense, and/or
+ sell copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following
+ conditions:
+
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE
+ FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.
+
+ Except as contained in this notice, the name of the X
+ Consortium shall not be used in advertising or otherwise to
+ promote the sale, use or other dealings in this Software
+ without prior written authorization from the X Consortium. X
+ Window System is a trademark of The Open Group.
+
+ Copyright © 2008 by Peter Hutterer
+
+ Permission is hereby granted, free of charge, to any person
+ obtaining a copy of this software and associated documentation
+ files (the "Software"), to deal in the Software without
+ restriction, including without limitation the rights to use,
+ copy, modify, merge, publish, distribute, sublicense, and/or
+ sell copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following
+ conditions:
+
+ The above copyright notice and this permission notice
+ (including the next paragraph) shall be included in all copies
+ or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ OTHER DEALINGS IN THE SOFTWARE.
+
+1. Input Extension Overview
+
+ This document defines an extension to the X11 protocol to
+ support input devices other than the core X keyboard and
+ pointer. An accompanying document defines a corresponding
+ extension to Xlib (similar extensions for languages other than
+ C are anticipated). This first section gives an overview of the
+ input extension. The next section defines the new protocol
+ requests defined by the extension. We conclude with a
+ description of the new input events generated by the additional
+ input devices.
+
+ This document only describes the behaviour of servers supporting
+ up to the X Input Extension 1.5. For servers supporting the X
+ Input Extensions 2.0, see XI2proto.txt. New clients are discouraged
+ from using this protocol specification. Instead, the use of XI 2.x
+ is recommended.
+
+1.1 Design Approach
+
+ The design approach of the extension is to define requests and
+ events analogous to the core requests and events. This allows
+ extension input devices to be individually distinguishable from
+ each other and from the core input devices. These requests and
+ events make use of a device identifier and support the
+ reporting of n-dimensional motion data as well as other data
+ that is not reportable via the core input events.
+
+1.2 Core Input Devices
+
+ The X server core protocol supports two input devices: a
+ pointer and a keyboard. The pointer device has two major
+ functions. First, it may be used to generate motion information
+ that client programs can detect. Second, it may also be used to
+ indicate the current location and focus of the X keyboard. To
+ accomplish this, the server echoes a cursor at the current
+ position of the X pointer. Unless the X keyboard has been
+ explicitly focused, this cursor also shows the current location
+ and focus of the X keyboard. The X keyboard is used to generate
+ input that client programs can detect.
+
+ In servers supporting XI 1.4 and above, the core pointer and
+ the core keyboard are virtual devices that do not represent a
+ physical device connected to the host computer.
+ In servers supporting XI 2.0 and above, there may be multiple
+ core pointers and keyboards. Refer to XI2proto.txt for more
+ information.
+
+ The X keyboard and X pointer are referred to in this document
+ as the core devices, and the input events they generate
+ (KeyPress, KeyRelease, ButtonPress, ButtonRelease, and
+ MotionNotify) are known as the core input events. All other
+ input devices are referred to as extension input devices and
+ the input events they generate are referred to as extension
+ input events.
+
+ In servers supporting only XI 1.x, this input extension does
+ not change the behavior or functionality of the core input
+ devices, core events, or core protocol requests, with the
+ exception of the core grab requests. These requests may affect
+ the synchronization of events from extension devices. See the
+ explanation in the section titled "Event Synchronization and
+ Core Grabs".
+
+ Selection of the physical devices to be initially used by the
+ server as the core devices is left implementation-dependent.
+ Requests are defined that allow client programs to change which
+ physical devices are used as the core devices.
+
+1.3 Extension Input Devices
+
+ The input extension v1.x controls access to input devices other
+ than the X keyboard and X pointer. It allows client programs to
+ select input from these devices independently from each other
+ and independently from the core devices.
+
+ A client that wishes to access a specific device must first
+ determine whether that device is connected to the X server.
+ This is done through the ListInputDevices request, which will
+ return a list of all devices that can be opened by the X
+ server. A client can then open one or more of these devices
+ using the OpenDevice request, specify what events they are
+ interested in receiving, and receive and process input events
+ from extension devices in the same way as events from the X
+ keyboard and X pointer. Input events from these devices are of
+ extension types ( DeviceKeyPress, DeviceKeyRelease,
+ DeviceButtonPress, DeviceButtonRelease, DeviceMotionNotify,
+ etc.) and contain a device identifier so that events of the
+ same type coming from different input devices can be
+ distinguished.
+
+ Any kind of input device may be used as an extension input
+ device. Extension input devices may have 0 or more keys, 0 or
+ more buttons, and may report 0 or more axes of motion. Motion
+ may be reported as relative movements from a previous position
+ or as an absolute position. All valuators reporting motion
+ information for a given extension input device must report the
+ same kind of motion information (absolute or relative).
+
+ This extension is designed to accommodate new types of input
+ devices that may be added in the future. The protocol requests
+ that refer to specific characteristics of input devices
+ organize that information by input classes. Server implementors
+ may add new classes of input devices without changing the
+ protocol requests. Input classes are unique numbers registered
+ with the X Consortium. Each extension input device may support
+ multiple input classes.
+
+ In XI 1.x, all extension input devices are treated like the
+ core X keyboard in determining their location and focus. The
+ server does not track the location of these devices on an
+ individual basis, and therefore does not echo a cursor to
+ indicate their current location. Instead, their location is
+ determined by the location of the core X pointer. Like the core
+ X keyboard, some may be explicitly focused. If they are not
+ explicitly focused, their focus is determined by the location
+ of the core X pointer.
+
+ Most input events reported by the server to a client are of
+ fixed size (32 bytes). In order to represent the change in
+ state of an input device the extension may need to generate a
+ sequence of input events. A client side library (such as Xlib)
+ will typically take these raw input events and format them into
+ a form more convenient to the client.
+
+1.4 Event Classes
+
+ In the core protocol a client registers interest in receiving
+ certain input events directed to a window by modifying that
+ window's event-mask. Most of the bits in the event mask are
+ already used to specify interest in core X events. The input
+ extension specifies a different mechanism by which a client can
+ express interest in events generated by this extension.
+
+ When a client opens a extension input device via the OpenDevice
+ request, an XDevice structure is returned. Macros are provided
+ that extract 32-bit numbers called event classes from that
+ structure, that a client can use to register interest in
+ extension events via the SelectExtensionEvent request. The
+ event class combines the desired event type and device id, and
+ may be thought of as the equivalent of core event masks.
+
+1.5 Input Classes
+
+ Some of the input extension requests divide input devices into
+ classes based on their functionality. This is intended to allow
+ new classes of input devices to be defined at a later time
+ without changing the semantics of these requests. The following
+ input device classes are currently defined:
+
+ KEY
+ The device reports key events.
+
+ BUTTON
+ The device reports button events.
+
+ VALUATOR
+ The device reports valuator data in motion events.
+
+ PROXIMITY
+ The device reports proximity events.
+
+ FOCUS
+ The device can be focused and reports focus events.
+
+ FEEDBACK
+ The device supports feedbacks.
+
+ OTHER
+ The ChangeDeviceNotify, DeviceMappingNotify, and
+ DeviceStateNotify macros may be invoked passing the
+ XDevice structure returned for this device.
+
+ Each extension input device may support multiple input classes.
+ Additional classes may be added in the future. Requests that
+ support multiple input classes, such as the ListInputDevices
+ function that lists all available input devices, organize the
+ data they return by input class. Client programs that use these
+ requests should not access data unless it matches a class
+ defined at the time those clients were compiled. In this way,
+ new classes can be added without forcing existing clients that
+ use these requests to be recompiled.
+
+2. Requests
+
+ Extension input devices are accessed by client programs through
+ the use of new protocol requests. This section summarizes the
+ new requests defined by this extension. The syntax and type
+ definitions used below follow the notation used for the X11
+ core protocol.
+
+2.1 Getting the Extension Version
+
+ The GetExtensionVersion request returns version information
+ about the input extension.
+
+ GetExtensionVersion
+ name: STRING
+ =>
+ present: BOOL
+ protocol-major-version: CARD16
+ protocol-minor-version: CARD16
+
+ The protocol version numbers returned indicate the version of
+ the input extension supported by the target X server. The
+ version numbers can be compared to constants defined in the
+ header file XI.h. Each version is a superset of the previous
+ versions.
+
+ The name must be the name of the Input Extension as defined
+ in the header file XI.h.
+
+2.2 Listing Available Devices
+
+ A client that wishes to access a specific device must first
+ determine whether that device is connected to the X server.
+ This is done through the ListInputDevices request, which will
+ return a list of all devices that can be opened by the X
+ server.
+
+ ListInputDevices
+ =>
+ input-devices: ListOfDeviceInfo
+
+ where
+
+ DEVICEINFO:
+ [type: ATOM
+ id: CARD8
+ num_classes: CARD8
+ use: {IsXKeyboard, IsXPointer, IsXExtensionPointer,
+ IsXExtensionKeyboard, IsExtensionDevice}
+ info: LISTofINPUTINFO
+ name: STRING8]
+
+ INPUTINFO: {KEYINFO, BUTTONINFO, VALUATORINFO}
+ KEYINFO:
+ [class: CARD8
+ length: CARD8
+ min-keycode: KEYCODE
+ max-keycode: KEYCODE
+ num-keys: CARD16]
+ BUTTONINFO:
+ [class: CARD8
+ length: CARD8
+ num-buttons: CARD16]
+ VALUATORINFO:
+ [class: CARD8
+ length: CARD8
+ num_axes: CARD8
+ mode: SETofDEVICEMODE
+ motion_buffer_size: CARD32
+ axes: LISTofAXISINFO]
+
+ AXISINFO:
+ [resolution: CARD32
+ min-val: CARD32
+ max-val: CARD32]
+ DEVICEMODE: {Absolute, Relative}
+
+ Errors: None
+
+ This request returns a list of all devices that can be opened
+ by the X server, including the core X keyboard and X pointer.
+ Some implementations may open all input devices as part of X
+ initialization, while others may not open an input device until
+ requested to do so by a client program.
+
+ The information returned for each device is as follows:
+
+ type
+ The type field is of type Atom and indicates the nature
+ of the device. Clients may determine device types by
+ invoking the XInternAtom request passing one of the
+ names defined in the header file XI.h. The following
+ names have been defined to date:
+
+ MOUSE
+ TABLET
+ KEYBOARD
+ TOUCHSCREEN
+ TOUCHPAD
+ BUTTONBOX
+ BARCODE
+ KNOB_BOX
+ TRACKBALL
+ QUADRATURE
+ SPACEBALL
+ DATAGLOVE
+ EYETRACKER
+ CURSORKEYS
+ FOOTMOUSE
+ ID_MODULE
+ ONE_KNOB
+ NINE_KNOB
+ JOYSTICK
+
+
+ id
+ The id is a small cardinal value in the range 0-128 that
+ uniquely identifies the device. It is assigned to the
+ device when it is initialized by the server. Some
+ implementations may not open an input device until
+ requested by a client program, and may close the device
+ when the last client accessing it requests that it be
+ closed. If a device is opened by a client program via
+ XOpenDevice, then closed via XCloseDevice, then opened
+ again, it is not guaranteed to have the same id after
+ the second open request.
+
+ num_classes
+ The num_classes field is a small cardinal value in the
+ range 0-255 that specifies the number of input classes
+ supported by the device for which information is
+ returned by ListInputDevices. Some input classes, such
+ as class Focus and class Proximity do not have any
+ information to be returned by ListInputDevices.
+
+ use
+ The use field specifies how the device is currently
+ being used. If the value is IsXKeyboard, the device is
+ currently being used as the X keyboard. If the value is
+ IsXPointer, the device is currently being used as the X
+ pointer. If the value is IsXExtensionPointer, the device
+ is available for use as an extension pointer. If the value
+ is IsXExtensionKeyboard, the device is available for use as
+ and extension keyboard.
+ Older versions of XI report all extension devices as
+ IsXExtensionDevice.
+
+ name
+ The name field contains a pointer to a null-terminated
+ string that corresponds to one of the defined device
+ types.
+
+ InputInfo
+ InputInfo is one of: KeyInfo, ButtonInfo or
+ ValuatorInfo. The first two fields are common to all
+ three:
+
+ class
+ The class field is a cardinal value in the range
+ 0-255. It uniquely identifies the class of input
+ for which information is returned.
+
+ length
+ The length field is a cardinal value in the range
+ 0-255. It specifies the number of bytes of data
+ that are contained in this input class. The length
+ includes the class and length fields.
+
+ The remaining information returned for input class
+ KEYCLASS is as follows:
+
+ min_keycode
+ min_keycode is of type KEYCODE. It specifies the
+ minimum keycode that the device will report. The
+ minimum keycode will not be smaller than 8.
+
+ max_keycode
+ max_keycode is of type KEYCODE. It specifies the
+ maximum keycode that the device will report. The
+ maximum keycode will not be larger than 255.
+
+ num_keys
+ num_keys is a cardinal value that specifies the
+ number of keys that the device has.
+
+ The remaining information returned for input class
+ BUTTONCLASS is as follows:
+
+ num_buttons
+ num_buttons is a cardinal value that specifies the
+ number of buttons that the device has.
+
+ The remaining information returned for input class
+ VALUATORCLASS is as follows:
+
+ mode
+ mode is a constant that has one of the following
+ values: Absolute or Relative. Some devices allow
+ the mode to be changed dynamically via the
+ SetDeviceMode request.
+
+ motion_buffer_size
+ motion_buffer_size is a cardinal number that
+ specifies the number of elements that can be
+ contained in the motion history buffer for the
+ device.
+
+ axes
+ The axes field contains a pointer to an AXISINFO
+ struture.
+
+ The information returned for each axis reported by the
+ device is:
+
+ resolution
+ The resolution is a cardinal value in
+ counts/meter.
+
+ min_val
+ The min_val field is a cardinal value in that
+ contains the minimum value the device reports for
+ this axis. For devices whose mode is Relative, the
+ min_val field will contain 0.
+
+ max_val
+ The max_val field is a cardinal value in that
+ contains the maximum value the device reports for
+ this axis. For devices whose mode is Relative, the
+ max_val field will contain 0.
+
+2.3 Enabling Devices
+
+ Client programs that wish to access an extension device must
+ request that the server open that device. This is done via the
+ OpenDevice request.
+
+ OpenDevice
+ id: CARD8
+ =>
+ DEVICE:
+ [device_id: XID
+ num_classes: INT32
+ classes: LISTofINPUTCLASSINFO]
+ INPUTCLASSINFO:
+ [input_class: CARD8
+ event_type_base: CARD8]
+
+ Errors: Device
+
+ This request returns the event classes to be used by the client
+ to indicate which events the client program wishes to receive.
+ Each input class may report several event classes. For example,
+ input class Keys reports DeviceKeyPress and DeviceKeyRelease
+ event classes. Input classes are unique numbers registered with
+ the X Consortium. Input class Other exists to report event
+ classes that are not specific to any one input class, such as
+ DeviceMappingNotify, ChangeDeviceNotify, and DeviceStateNotify.
+
+ The information returned for each device is as follows:
+
+ device_id
+ The device_id is a number that uniquely identifies the
+ device.
+
+ num_classes
+ The num_classes field contains the number of input
+ classes supported by this device.
+
+ For each class of input supported by the device, the
+ InputClassInfo structure contains the following information:
+
+ input_class
+ The input_class is a small cardinal number that
+ identifies the class of input.
+
+ event_type_base
+ The event_type_base is a small cardinal number that
+ specifies the event type of one of the events reported
+ by this input class. This information is not directly
+ used by client programs. Instead, the Device is used by
+ macros that return extension event types and event
+ classes. This is described in the section of this
+ document entitled "Selecting Extension Device Events".
+
+ The information in the InputClassInfo reflects the state of
+ this device at the time the request was processed.
+
+ Before it exits, the client program should explicitly request
+ that the server close the device. This is done via the
+ CloseDevice request.
+
+ A client may open the same extension device more than once.
+ Requests after the first successful one return an additional
+ XDevice structure with the same information as the first, but
+ otherwise have no effect. A single CloseDevice request will
+ terminate that client's access to the device.
+
+ Closing a device releases any active or passive grabs the
+ requesting client has established. If the device is frozen only
+ by an active grab of the requesting client, the queued events
+ are released when the client terminates.
+
+ If a client program terminates without closing a device, the
+ server will automatically close that device on behalf of the
+ client. This does not affect any other clients that may be
+ accessing that device.
+
+ CloseDevice:
+ device: DEVICE
+
+ Errors: Device
+
+2.4 Changing The Mode Of A Device
+
+ Some devices are capable of reporting either relative or
+ absolute motion data. To change the mode of a device from
+ relative to absolute, use the SetDeviceMode request. The valid
+ values are Absolute or Relative.
+
+ This request will fail and return DeviceBusy if another client
+ already has the device open with a different mode. It will fail
+ and return AlreadyGrabbed if another client has the device
+ grabbed. The request will fail with a BadMatch error if the
+ requested mode is not supported by the device.
+
+ SetDeviceMode
+ device:DEVICE
+ mode: {Absolute, Relative}
+ =>
+ status: {Success, DeviceBusy, AlreadyGrabbed}
+
+ Errors: Device, Match, Mode
+
+2.5 Initializing Valuators on an Input Device
+
+ Some devices that report absolute positional data can be
+ initialized to a starting value. Devices that are capable of
+ reporting relative motion or absolute positional data may
+ require that their valuators be initialized to a starting value
+ after the mode of the device is changed to Absolute. To
+ initialize the valuators on such a device, use the
+ SetDeviceValuators request.
+
+ SetDeviceValuators
+ device: DEVICE
+ first_valuator: CARD8
+ num_valuators: CARD8
+ valuators: LISTOFINT32
+ =>
+ status: {Success, AlreadyGrabbed}
+
+ Errors: Length, Device, Match, Value
+
+ This request initializes the specified valuators on the
+ specified extension input device. Valuators are numbered
+ beginning with zero. Only the valuators in the range specified
+ by first_valuator and num_valuators are set. If the number of
+ valuators supported by the device is less than the expression
+ first_valuator + num_valuators, a Value error will result.
+
+ If the request succeeds, Success is returned. If the specifed
+ device is grabbed by some other client, the request will fail
+ and a status of AlreadyGrabbed will be returned.
+
+2.6 Getting Input Device Controls
+
+ GetDeviceControl
+ device: DEVICE
+ control: XID
+ =>
+ controlState: {DeviceState}
+
+ where
+
+ DeviceState: DeviceResolutionState
+
+ Errors: Length, Device, Match, Value
+
+ This request returns the current state of the specified device
+ control. The device control must be supported by the target
+ server and device or an error will result.
+
+ If the request is successful, a pointer to a generic
+ DeviceState structure will be returned. The information
+ returned varies according to the specified control and is
+ mapped by a structure appropriate for that control.
+
+ GetDeviceControl will fail with a BadValue error if the server
+ does not support the specified control. It will fail with a
+ BadMatch error if the device does not support the specified
+ control.
+
+ Supported device controls and the information returned for them
+ include:
+
+ DEVICE_RESOLUTION:
+ [control: CARD16
+ length: CARD16
+ num_valuators: CARD8
+ resolutions: LISTofCARD32
+ min_resolutions: LISTofCARD32
+ max_resolutions: LISTofCARD32]
+
+ This device control returns a list of valuators and the range
+ of valid resolutions allowed for each. Valuators are numbered
+ beginning with 0. Resolutions for all valuators on the device
+ are returned. For each valuator i on the device, resolutions[i]
+ returns the current setting of the resolution,
+ min_resolutions[i] returns the minimum valid setting, and
+ max_resolutions[i] returns the maximum valid setting.
+
+ When this control is specified, XGetDeviceControl will fail
+ with a BadMatch error if the specified device has no valuators.
+
+ ChangeDeviceControl:
+ device: DEVICE
+ XID: controlId
+ control: DeviceControl
+
+ where
+
+ DeviceControl: DeviceResolutionControl
+ =>
+ status: {Success, DeviceBusy, AlreadyGrabbed}
+
+ Errors: Length, Device, Match, Value
+
+ ChangeDeviceControl changes the specifed device control
+ according to the values specified in the DeviceControl
+ structure. The device control must be supported by the target
+ server and device or an error will result.
+
+ The information passed with this request varies according to
+ the specified control and is mapped by a structure appropriate
+ for that control.
+
+ ChangeDeviceControl will fail with a BadValue error if the
+ server does not support the specified control. It will fail
+ with a BadMatch error if the server supports the specified
+ control, but the requested device does not. The request will
+ fail and return a status of DeviceBusy if another client
+ already has the device open with a device control state that
+ conflicts with the one specified in the request. It will fail
+ with a status of AlreadyGrabbed if some other client has
+ grabbed the specified device. If the request succeeds, Success
+ is returned. If it fails, the device control is left unchanged.
+
+ Supported device controls and the information specified for
+ them include:
+
+ DEVICE_RESOLUTION:
+ [control: CARD16
+ length: CARD16
+ first_valuator: CARD8
+ num_valuators: CARD8
+ resolutions: LISTofCARD32]
+
+ This device control changes the resolution of the specified
+ valuators on the specified extension input device. Valuators
+ are numbered beginning with zero. Only the valuators in the
+ range specified by first_valuator and num_valuators are set. A
+ value of -1 in the resolutions list indicates that the
+ resolution for this valuator is not to be changed.
+ num_valuators specifies the number of valuators in the
+ resolutions list.
+
+ When this control is specified, XChangeDeviceControl will fail
+ with a BadMatch error if the specified device has no valuators.
+ If a resolution is specified that is not within the range of
+ valid values (as returned by XGetDeviceControl) the request
+ will fail with a BadValue error. If the number of valuators
+ supported by the device is less than the expression
+ first_valuator + num_valuators, a BadValue error will result.
+
+ If the request fails for any reason, none of the valuator
+ resolutions will be changed.
+
+ ChangeDeviceControl causes the server to send a DevicePresence
+ event to interested clients.
+
+2.7 Selecting Extension Device Events
+
+ Extension input events are selected using the
+ SelectExtensionEvent request.
+
+ SelectExtensionEvent
+ interest: LISTofEVENTCLASS
+ window: WINDOW
+
+ Errors: Window, Class, Access
+
+ This request specifies to the server the events within the
+ specified window which are of interest to the client. As with
+ the core XSelectInput function, multiple clients can select
+ input on the same window.
+
+ XSelectExtensionEvent requires a list of event classes. An
+ event class is a 32-bit number that combines an event type and
+ device id, and is used to indicate which event a client wishes
+ to receive and from which device it wishes to receive it.
+ Macros are provided to obtain event classes from the data
+ returned by the XOpenDevice request. The names of these macros
+ correspond to the desired events, i.e. the DeviceKeyPress is
+ used to obtain the event class for DeviceKeyPress events. The
+ syntax of the macro invocation is:
+ DeviceKeyPress (device, event_type, event_class);
+ device: DEVICE
+ event_type: INT
+ event_class: INT
+
+ The value returned in event_type is the value that will be
+ contained in the event type field of the XDeviceKeyPressEvent
+ when it is received by the client. The value returned in
+ event_class is the value that should be passed in making an
+ XSelectExtensionEvent request to receive DeviceKeyPress events.
+
+ For DeviceButtonPress events, the client may specify whether or
+ not an implicit passive grab should be done when the button is
+ pressed. If the client wants to guarantee that it will receive
+ a DeviceButtonRelease event for each DeviceButtonPress event it
+ receives, it should specify the DeviceButtonPressGrab event
+ class as well as the DeviceButtonPress event class. This
+ restricts the client in that only one client at a time may
+ request DeviceButtonPress events from the same device and
+ window if any client specifies this class.
+
+ If any client has specified the DeviceButtonPressGrab class,
+ any requests by any other client that specify the same device
+ and window and specify DeviceButtonPress or
+ DeviceButtonPressGrab will cause an Access error to be
+ generated.
+
+ If only the DeviceButtonPress class is specified, no implicit
+ passive grab will be done when a button is pressed on the
+ device. Multiple clients may use this class to specify the same
+ device and window combination.
+
+ A client may also specify the DeviceOwnerGrabButton class. If
+ it has specified both the DeviceButtonPressGrab and the
+ DeviceOwnerGrabButton classes, implicit passive grabs will
+ activate with owner_events set to True. If only the
+ DeviceButtonPressGrab class is specified, implicit passive
+ grabs will activate with owner_events set to False.
+
+ The client may select DeviceMotion events only when a button is
+ down. It does this by specifying the event classes
+ Button1Motion through Button5Motion, or ButtonMotion. An input
+ device will only support as many button motion classes as it
+ has buttons.
+
+2.8 Determining Selected Events
+
+ To determine which extension events are currently selected from
+ a given window, use GetSelectedExtensionEvents.
+
+ GetSelectedExtensionEvents
+ window: WINDOW
+ =>
+ this-client: LISTofEVENTCLASS
+ all-clients: LISTofEVENTCLASS
+
+ Errors: Window
+
+ This request returns two lists specifying the events selected
+ on the specified window. One list gives the extension events
+ selected by this client from the specified window. The other
+ list gives the extension events selected by all clients from
+ the specified window. This information is equivalent to that
+ returned by your-event-mask and all-event-masks in a
+ GetWindowAttributes request.
+
+2.9 Controlling Event Propagation
+
+ Extension events propagate up the window hierarchy in the same
+ manner as core events. If a window is not interested in an
+ extension event, it usually propagates to the closest ancestor
+ that is interested, unless the dont_propagate list prohibits
+ it. Grabs of extension devices may alter the set of windows
+ that receive a particular extension event.
+
+ Client programs may control extension event propagation through
+ the use of the following two requests.
+
+ XChangeDeviceDontPropagateList adds an event to or deletes an
+ event from the do_not_propagate list of extension events for
+ the specified window. This list is maintained for the life of
+ the window, and is not altered if the client terminates.
+
+ ChangeDeviceDontPropagateList
+ window: WINDOW
+ eventclass: LISTofEVENTCLASS
+ mode: {AddToList, DeleteFromList}
+
+ Errors: Window, Class, Mode
+
+ This function modifies the list specifying the events that are
+ not propagated to the ancestors of the specified window. You
+ may use the modes AddToList or DeleteFromList.
+
+ GetDeviceDontPropagateList
+ window: WINDOW
+ Errors: Window
+ =>
+ dont-propagate-list: LISTofEVENTCLASS
+
+ This function returns a list specifying the events that are not
+ propagated to the ancestors of the specified window.
+
+2.10 Sending Extension Events
+
+ One client program may send an event to another via the
+ XSendExtensionEvent function.
+
+ The event in the XEvent structure must be one of the events
+ defined by the input extension, so that the X server can
+ correctly byte swap the contents as necessary. The contents of
+ the event are otherwise unaltered and unchecked by the X server
+ except to force send_event to True in the forwarded event and
+ to set the sequence number in the event correctly.
+
+ XSendExtensionEvent returns zero if the conversion-to-wire
+ protocol failed, otherwise it returns nonzero.
+
+ SendExtensionEvent
+ device: DEVICE
+ destination: WINDOW
+ propagate: BOOL
+ eventclass: LISTofEVENTCLASS
+ event: XEVENT
+
+ Errors: Device, Value, Class, Window
+
+2.11 Getting Motion History
+
+ GetDeviceMotionEvents
+ device: DEVICE
+ start, stop: TIMESTAMP or CurrentTime
+ =>
+ nevents_return: CARD32
+ mode_return: {Absolute, Relative}
+ axis_count_return: CARD8
+ events: LISTofDEVICETIMECOORD
+
+ where
+
+ DEVICETIMECOORD:
+ [data: LISTofINT32
+ time: TIMESTAMP]
+
+ Errors: Device, Match
+
+ This request returns all positions in the device's motion
+ history buffer that fall between the specified start and stop
+ times inclusive. If the start time is in the future, or is
+ later than the stop time, no positions are returned.
+
+ The data field of the DEVICETIMECOORD structure is a sequence
+ of data items. Each item is of type INT32, and there is one
+ data item per axis of motion reported by the device. The number
+ of axes reported by the device is returned in the axis_count
+ variable.
+
+ The value of the data items depends on the mode of the device,
+ which is returned in the mode variable. If the mode is
+ Absolute, the data items are the raw values generated by the
+ device. These may be scaled by the client program using the
+ maximum values that the device can generate for each axis of
+ motion that it reports. The maximum and minimum values for each
+ axis are reported by the ListInputDevices request.
+
+ If the mode is Relative, the data items are the relative values
+ generated by the device. The client program must choose an
+ initial position for the device and maintain a current position
+ by accumulating these relative values.
+
+2.12 Changing The Core Devices
+
+ These requests are provided to change which physical device is
+ used as the X pointer or X keyboard. These requests are
+ deprecated in servers supporting XI 1.4 and above, and will
+ always return a a BadDevice error.
+
+ Using these requests may change the characteristics of the core
+ devices. The new pointer device may have a different number of
+ buttons than the old one did, or the new keyboard device may
+ have a different number of keys or report a different range of
+ keycodes. Client programs may be running that depend on those
+ characteristics. For example, a client program could allocate
+ an array based on the number of buttons on the pointer device,
+ and then use the button numbers received in button events as
+ indicies into that array. Changing the core devices could cause
+ such client programs to behave improperly or abnormally
+ terminate.
+
+ These requests change the X keyboard or X pointer device and
+ generate an ChangeDeviceNotify event and a MappingNotify event.
+ The ChangeDeviceNotify event is sent only to those clients that
+ have expressed an interest in receiving that event via the
+ XSelectExtensionEvent request. The specified device becomes the
+ new X keyboard or X pointer device. The location of the core
+ device does not change as a result of this request.
+
+ These requests fail and return AlreadyGrabbed if either the
+ specified device or the core device it would replace are
+ grabbed by some other client. They fail and return GrabFrozen
+ if either device is frozen by the active grab of another
+ client.
+
+ These requests fail with a BadDevice error if the specified
+ device is invalid, or has not previously been opened via
+ OpenDevice. To change the X keyboard device, use the
+ ChangeKeyboardDevice request. The specified device must support
+ input class Keys (as reported in the ListInputDevices request)
+ or the request will fail with a BadMatch error. Once the device
+ has successfully replaced one of the core devices, it is
+ treated as a core device until it is in turn replaced by
+ another ChangeDevice request, or until the server terminates.
+ The termination of the client that changed the device will not
+ cause it to change back. Attempts to use the CloseDevice
+ request to close the new core device will fail with a BadDevice
+ error.
+
+ The focus state of the new keyboard is the same as the focus
+ state of the old X keyboard. If the new keyboard was not
+ initialized with a FocusRec, one is added by the
+ ChangeKeyboardDevice request. The X keyboard is assumed to have
+ a KbdFeedbackClassRec. If the device was initialized without a
+ KbdFeedbackClassRec, one will be added by this request. The
+ KbdFeedbackClassRec will specify a null routine as the control
+ procedure and the bell procedure.
+
+ ChangeKeyboardDevice
+ device: DEVICE
+ Errors: Device, Match
+ =>
+ status: Success, AlreadyGrabbed, Frozen
+
+ To change the X pointer device, use the ChangePointerDevice
+ request. The specified device must support input class
+ Valuators (as reported in the ListInputDevices request) or the
+ request will fail with a BadMatch error. The valuators to be
+ used as the x- and y-axes of the pointer device must be
+ specified. Data from other valuators on the device will be
+ ignored.
+
+ The X pointer device does not contain a FocusRec. If the new
+ pointer was initialized with a FocusRec, it is freed by the
+ ChangePointerDevice request. The X pointer is assumed to have a
+ ButtonClassRec and a PtrFeedbackClassRec. If the device was
+ initialized without a ButtonClassRec or a PtrFeedbackClassRec,
+ one will be added by this request. The ButtonClassRec added
+ will have no buttons, and the PtrFeedbackClassRec will specify
+ a null routine as the control procedure.
+
+ If the specified device reports absolute positional
+ information, and the server implementation does not allow such
+ a device to be used as the X pointer, the request will fail
+ with a BadDevice error.
+
+ Once the device has successfully replaced one of the core
+ devices, it is treated as a core device until it is in turn
+ replaced by another ChangeDevice request, or until the server
+ terminates. The termination of the client that changed the
+ device will not cause it to change back. Attempts to use the
+ CloseDevice request to close the new core device will fail with
+ a BadDevice error.
+
+ ChangePointerDevice
+ device: DEVICE
+ xaxis: CARD8
+ yaxis: CARD8
+ =>
+ status: Success, AlreadyGrabbed, Frozen
+
+ Errors: Device, Match
+
+2.12 Event Synchronization And Core Grabs
+
+ Implementation of the input extension requires an extension of
+ the meaning of event synchronization for the core grab
+ requests. This is necessary in order to allow window managers
+ to freeze all input devices with a single request.
+
+ The core grab requests require a pointer_mode and keyboard_mode
+ argument. The meaning of these modes is changed by the input
+ extension. For the XGrabPointer and XGrabButton requests,
+ pointer_mode controls synchronization of the pointer device,
+ and keyboard_mode controls the synchronization of all other
+ input devices. For the XGrabKeyboard and XGrabKey requests,
+ pointer_mode controls the synchronization of all input devices
+ except the X keyboard, while keyboard_mode controls the
+ synchronization of the keyboard. When using one of the core
+ grab requests, the synchronization of extension devices is
+ controlled by the mode specified for the device not being
+ grabbed.
+
+2.13 Extension Active Grabs
+
+ Active grabs of extension devices are supported via the
+ GrabDevice request in the same way that core devices are
+ grabbed using the core GrabKeyboard request, except that a
+ Device is passed as a function parameter. A list of events that
+ the client wishes to receive is also passed. The UngrabDevice
+ request allows a previous active grab for an extension device
+ to be released.
+
+ To grab an extension device, use the GrabDevice request. The
+ device must have previously been opened using the OpenDevice
+ request.
+
+ GrabDevice
+ device: DEVICE
+ grab-window: WINDOW
+ owner-events: BOOL
+ event-list: LISTofEVENTCLASS
+ this-device-mode: {Synchronous, Asynchronous}
+ other-device-mode: {Synchronous, Asynchronous}
+ time:TIMESTAMP or CurrentTime
+ =>
+ status: Success, AlreadyGrabbed, Frozen,
+ InvalidTime, NotViewable
+
+ Errors: Device, Window, Value
+
+ This request actively grabs control of the specified input
+ device. Further input events from this device are reported only
+ to the grabbing client. This request overrides any previous
+ active grab by this client for this device.
+
+ The event-list parameter is a pointer to a list of event
+ classes. These are used to indicate which events the client
+ wishes to receive while the device is grabbed. Only event
+ classes obtained from the grabbed device are valid.
+
+ If owner-events is False, input events generated from this
+ device are reported with respect to grab-window, and are only
+ reported if selected by being included in the event-list. If
+ owner-events is True, then if a generated event would normally
+ be reported to this client, it is reported normally, otherwise
+ the event is reported with respect to the grab-window, and is
+ only reported if selected by being included in the event-list.
+ For either value of owner-events, unreported events are
+ discarded.
+
+ If this-device-mode is Asynchronous, device event processing
+ continues normally. If the device is currently frozen by this
+ client, then processing of device events is resumed. If
+ this-device-mode is Synchronous, the state of the grabbed
+ device (as seen by means of the protocol) appears to freeze,
+ and no further device events are generated by the server until
+ the grabbing client issues a releasing AllowDeviceEvents
+ request or until the device grab is released. Actual device
+ input events are not lost while the device is frozen; they are
+ simply queued for later processing.
+
+ If other-device-mode is Asynchronous, event processing is
+ unaffected by activation of the grab. If other-device-mode is
+ Synchronous, the state of all input devices except the grabbed
+ one (as seen by means of the protocol) appears to freeze, and
+ no further events are generated by the server until the
+ grabbing client issues a releasing AllowDeviceEvents request or
+ until the device grab is released. Actual events are not lost
+ while the devices are frozen; they are simply queued for later
+ processing.
+
+ This request generates DeviceFocusIn and DeviceFocusOut events.
+
+ This request fails and returns:
+
+ AlreadyGrabbed
+ If the device is actively grabbed by some other client.
+
+ NotViewable
+ If grab-window is not viewable.
+
+ InvalidTime
+ If the specified time is earlier than the last-grab-time
+ for the specified device or later than the current X
+ server time. Otherwise, the last-grab-time for the
+ specified device is set to the specified time and
+ CurrentTime is replaced by the current X server time.
+
+ Frozen
+ If the device is frozen by an active grab of another
+ client.
+
+ If a grabbed device is closed by a client while an active grab
+ by that client is in effect, that active grab will be released.
+ Any passive grabs established by that client will be released.
+ If the device is frozen only by an active grab of the
+ requesting client, it is thawed.
+
+ To release a grab of an extension device, use UngrabDevice.
+
+ UngrabDevice
+ device: DEVICE
+ time: TIMESTAMP or CurrentTime
+
+ Errors: Device
+
+ This request releases the device if this client has it actively
+ grabbed (from either GrabDevice or GrabDeviceKey) and releases
+ any queued events. If any devices were frozen by the grab,
+ UngrabDevice thaws them. The request has no effect if the
+ specified time is earlier than the last-device-grab time or is
+ later than the current server time.
+
+ This request generates DeviceFocusIn and DeviceFocusOut events.
+
+ An UngrabDevice is performed automatically if the event window
+ for an active device grab becomes not viewable.
+
+2.14 Passively Grabbing A Key
+
+ Passive grabs of buttons and keys on extension devices are
+ supported via the GrabDeviceButton and GrabDeviceKey requests.
+ These passive grabs are released via the UngrabDeviceKey and
+ UngrabDeviceButton requests.
+
+ To passively grab a single key on an extension device, use
+ GrabDeviceKey. That device must have previously been opened
+ using the OpenDevice request.
+
+ GrabDeviceKey
+ device: DEVICE
+ keycode: KEYCODE or AnyKey
+ modifiers: SETofKEYMASK or AnyModifier
+ modifier-device: DEVICE or NULL
+ grab-window: WINDOW
+ owner-events: BOOL
+ event-list: LISTofEVENTCLASS
+ this-device-mode: {Synchronous, Asynchronous}
+ other-device-mode: {Synchronous, Asynchronous}
+
+ Errors: Device, Match, Access, Window, Value
+
+ This request is analogous to the core GrabKey request. It
+ establishes a passive grab on a device. Consequently, in the
+ future:
+ * IF the device is not grabbed and the specified key, which
+ itself can be a modifier key, is logically pressed when the
+ specified modifier keys logically are down on the specified
+ modifier device (and no other keys are down),
+ * AND no other modifier keys logically are down,
+ * AND EITHER the grab window is an ancestor of (or is) the
+ focus window OR the grab window is a descendent of the
+ focus window and contains the pointer,
+ * AND a passive grab on the same device and key combination
+ does not exist on any ancestor of the grab window,
+ * THEN the device is actively grabbed, as for GrabDevice, the
+ last-device-grab time is set to the time at which the key
+ was pressed (as transmitted in the DeviceKeyPress event),
+ and the DeviceKeyPress event is reported.
+
+ The interpretation of the remaining arguments is as for
+ GrabDevice. The active grab is terminated automatically when
+ logical state of the device has the specified key released
+ (independent of the logical state of the modifier keys).
+
+ Note that the logical state of a device (as seen by means of
+ the X protocol) may lag the physical state if device event
+ processing is frozen.
+
+ A modifier of AnyModifier is equivalent to issuing the request
+ for all possible modifier combinations (including the
+ combination of no modifiers). It is not required that all
+ modifiers specified have currently assigned keycodes. A key of
+ AnyKey is equivalent to issuing the request for all possible
+ keycodes. Otherwise, the key must be in the range specified by
+ min-keycode and max-keycode in the ListInputDevices request. If
+ it is not within that range, GrabDeviceKey generates a Value
+ error.
+
+ NULL may be passed for the modifier_device. If the
+ modifier_device is NULL, the core X keyboard is used as the
+ modifier_device.
+
+ An Access error is generated if some other client has issued a
+ GrabDeviceKey with the same device and key combination on the
+ same window. When using AnyModifier or AnyKey, the request
+ fails completely and the X server generates a Access error and
+ no grabs are established if there is a conflicting grab for any
+ combination.
+
+ This request cannot be used to grab a key on the X keyboard
+ device. The core GrabKey request should be used for that
+ purpose.
+
+ To release a passive grab of a single key on an extension
+ device, use UngrabDeviceKey.
+
+ UngrabDeviceKey
+ device: DEVICE
+ keycode: KEYCODE or AnyKey
+ modifiers: SETofKEYMASK or AnyModifier
+ modifier-device: DEVICE or NULL
+ grab-window: WINDOW
+
+ Errors: Device, Match, Window, Value, Alloc
+
+ This request is analogous to the core UngrabKey request. It
+ releases the key combination on the specified window if it was
+ grabbed by this client. A modifier of AnyModifier is equivalent
+ to issuing the request for all possible modifier combinations
+ (including the combination of no modifiers). A key of AnyKey is
+ equivalent to issuing the request for all possible keycodes.
+ This request has no effect on an active grab.
+
+ NULL may be passed for the modifier_device. If the
+ modifier_device is NULL, the core X keyboard is used as the
+ modifier_device.
+
+2.15 Passively Grabbing A Button
+
+ To establish a passive grab for a single button on an extension
+ device, use GrabDeviceButton.
+
+ GrabDeviceButton
+ device: DEVICE
+ button: BUTTON or AnyButton
+ modifiers: SETofKEYMASK or AnyModifier
+ modifier-device: DEVICE or NULL
+ grab-window: WINDOW
+ owner-events: BOOL
+ event-list: LISTofEVENTCLASS
+ this-device-mode: {Synchronous, Asynchr
+ onous}
+ other-device-mode: {Synchronous, Asynch
+ ronous}
+
+ Errors: Device, Match, Window, Access, Value
+
+ This request is analogous to the core GrabButton request. It
+ establishes an explicit passive grab for a button on an
+ extension input device. Since the server does not track
+ extension devices, no cursor is specified with this request.
+ For the same reason, there is no confine-to parameter. The
+ device must have previously been opened using the OpenDevice
+ request.
+
+ The GrabDeviceButton request establishes a passive grab on a
+ device. Consequently, in the future,
+
+ •
+ IF the device is not grabbed and the specified button is
+ logically pressed when the specified modifier keys
+ logically are down (and no other buttons or modifier
+ keys are down),
+
+ •
+ AND the grab window contains the device,
+
+ •
+ AND a passive grab on the same device and button/ key
+ combination does not exist on any ancestor of the grab
+ window,
+
+ •
+ THEN the device is actively grabbed, as for GrabDevice,
+ the last-grab time is set to the time at which the
+ button was pressed (as transmitted in the
+ DeviceButtonPress event), and the DeviceButtonPress
+ event is reported.
+
+ The interpretation of the remaining arguments is as for
+ GrabDevice. The active grab is terminated automatically when
+ logical state of the device has all buttons released
+ (independent of the logical state of the modifier keys).
+
+ Note that the logical state of a device (as seen by means of
+ the X protocol) may lag the physical state if device event
+ processing is frozen.
+
+ A modifier of AnyModifier is equivalent to issuing the request
+ for all possible modifier combinations (including the
+ combination of no modifiers). It is not required that all
+ modifiers specified have currently assigned keycodes. A button
+ of AnyButton is equivalent to issuing the request for all
+ possible buttons. It is not required that the specified button
+ be assigned to a physical button.
+
+ NULL may be passed for the modifier_device. If the
+ modifier_device is NULL, the core X keyboard is used as the
+ modifier_device.
+
+ An Access error is generated if some other client has issued a
+ GrabDeviceButton with the same device and button combination on
+ the same window. When using AnyModifier or AnyButton, the
+ request fails completely and the X server generates a Access
+ error and no grabs are established if there is a conflicting
+ grab for any combination. The request has no effect on an
+ active grab.
+
+ This request cannot be used to grab a button on the X pointer
+ device. The core GrabButton request should be used for that
+ purpose.
+
+ To release a passive grab of a button on an extension device,
+ use UngrabDeviceButton.
+
+ UngrabDeviceButton
+ device: DEVICE
+ button: BUTTON or AnyButton
+ modifiers: SETofKEYMASK or AnyModifier
+ modifier-device: DEVICE or NULL
+ grab-window: WINDOW
+
+ Errors: Device, Match, Window, Value, Alloc
+
+ This request is analogous to the core UngrabButton request. It
+ releases the passive button/key combination on the specified
+ window if it was grabbed by the client. A modifiers of
+ AnyModifier is equivalent to issuing the request for all
+ possible modifier combinations (including the combination of no
+ modifiers). A button of AnyButton is equivalent to issuing the
+ request for all possible buttons. This request has no effect on
+ an active grab. The device must have previously been opened
+ using the OpenDevice request otherwise a Device error will be
+ generated.
+
+ NULL may be passed for the modifier_device. If the
+ modifier_device is NULL, the core X keyboard is used as the
+ modifier_device.
+
+ This request cannot be used to ungrab a button on the X pointer
+ device. The core UngrabButton request should be used for that
+ purpose.
+
+2.16 Thawing A Device
+
+ To allow further events to be processed when a device has been
+ frozen, use AllowDeviceEvents.
+
+ AllowDeviceEvents
+ device: DEVICE
+ event-mode: {AsyncThisDevice, SyncThisD
+ evice, AsyncOtherDevices,
+ ReplayThisdevice, AsyncAll, or SyncAll}
+ time:TIMESTAMP or CurrentTime
+
+ Errors: Device, Value
+
+ The AllowDeviceEvents request releases some queued events if
+ the client has caused a device to freeze. The request has no
+ effect if the specified time is earlier than the last-grab time
+ of the most recent active grab for the client, or if the
+ specified time is later than the current X server time.
+
+ The following describes the processing that occurs depending on
+ what constant you pass to the event-mode argument:
+
+ * If the specified device is frozen by the client, event
+ processing for that device continues as usual. If the
+ device is frozen multiple times by the client on behalf
+ of multiple separate grabs, AsyncThisDevice thaws for
+ all. AsyncThisDevice has no effect if the specified
+ device is not frozen by the client, but the device need
+ not be grabbed by the client.
+
+ * If the specified device is frozen and actively grabbed
+ by the client, event processing for that device
+ continues normally until the next button or key event is
+ reported to the client. At this time, the specified
+ device again appears to freeze. However, if the reported
+ event causes the grab to be released, the specified
+ device does not freeze. SyncThisDevice has no effect if
+ the specified device is not frozen by the client or is
+ not grabbed by the client.
+
+ * If the specified device is actively grabbed by the
+ client and is frozen as the result of an event having
+ been sent to the client (either from the activation of a
+ GrabDeviceButton or from a previous AllowDeviceEvents
+ with mode SyncThisDevice, but not from a Grab), the grab
+ is released and that event is completely reprocessed.
+ This time, however, the request ignores any passive
+ grabs at or above (towards the root) the grab-window of
+ the grab just released. The request has no effect if the
+ specified device is not grabbed by the client or if it
+ is not frozen as the result of an event.
+
+ * If the remaining devices are frozen by the client, event
+ processing for them continues as usual. If the other
+ devices are frozen multiple times by the client on
+ behalf of multiple separate grabs, AsyncOtherDevices
+ “thaws” for all. AsyncOtherDevices has no effect if the
+ devices are not frozen by the client, but those devices
+ need not be grabbed by the client.
+
+ * If all devices are frozen by the client, event
+ processing (for all devices) continues normally until
+ the next button or key event is reported to the client
+ for a grabbed device (button event for the grabbed
+ device, key or motion event for the device), at which
+ time the devices again appear to freeze. However, if the
+ reported event causes the grab to be released, then the
+ devices do not freeze (but if any device is still
+ grabbed, then a subsequent event for it will still cause
+ all devices to freeze). SyncAll has no effect unless all
+ devices are frozen by the client. If any device is
+ frozen twice by the client on behalf of two separate
+ grabs, SyncAll "thaws" for both (but a subsequent freeze
+ for SyncAll will only freeze each device once).
+
+ * If all devices are frozen by the client, event
+ processing (for all devices) continues normally. If any
+ device is frozen multiple times by the client on behalf
+ of multiple separate grabs, AsyncAll "thaws" for all.
+ AsyncAll has no effect unless all devices are frozen by
+ the client.
+
+ AsyncThisDevice, SyncThisDevice, and ReplayThisDevice
+ have no effect on the processing of events from the
+ remaining devices. AsyncOtherDevices has no effect on
+ the processing of events from the specified device. When
+ the event_mode is SyncAll or AsyncAll, the device
+ parameter is ignored.
+
+ It is possible for several grabs of different devices
+ (by the same or different clients) to be active
+ simultaneously. If a device is frozen on behalf of any
+ grab, no event processing is performed for the device.
+ It is possible for a single device to be frozen because
+ of several grabs. In this case, the freeze must be
+ released on behalf of each grab before events can again
+ be processed.
+
+2.17 Controlling Device Focus
+
+ The current focus window for an extension input device can be
+ determined using the GetDeviceFocus request. Extension devices
+ are focused using the SetDeviceFocus request in the same way
+ that the keyboard is focused using the SetInputFocus request,
+ except that a device is specified as part of the request. One
+ additional focus state, FollowKeyboard, is provided for
+ extension devices.
+
+ To get the current focus state, revert state, and focus time of
+ an extension device, use GetDeviceFocus.
+
+ GetDeviceFocus
+ device: DEVICE
+ =>
+ focus: WINDOW, PointerRoot, FollowKeyboard, or None
+ revert-to: Parent, PointerRoot, FollowKeyboard, or None
+ focus-time: TIMESTAMP
+
+ Errors: Device, Match
+
+ This request returns the current focus state, revert-to state,
+ and last-focus-time of an extension device.
+
+ To set the focus of an extension device, use SetDeviceFocus.
+
+ SetDeviceFocus
+ device: DEVICE
+ focus: WINDOW, PointerRoot, FollowKeyboard, or None
+ revert-to: Parent, PointerRoot, FollowKeyboard, or None
+ focus-time: TIMESTAMP
+
+ Errors: Device, Window, Value, Match
+
+ This request changes the focus for an extension input device
+ and the last-focus-change-time. The request has no effect if
+ the specified time is earlier than the last-focus-change-time
+ or is later than the current X server time. Otherwise, the
+ last-focus-change-time is set to the specified time, with
+ CurrentTime replaced by the current server time.
+
+ The action taken by the server when this request is requested
+ depends on the value of the focus argument:
+
+ * If the focus argument is None, all input events from
+ this device will be discarded until a new focus window
+ is set. In this case, the revert-to argument is ignored.
+
+ * If a window ID is assigned to the focus argument, it
+ becomes the focus window of the device. If an input
+ event from the device would normally be reported to this
+ window or to one of its inferiors, the event is reported
+ normally. Otherwise, the event is reported relative to
+ the focus window.
+
+ * If you assign PointerRoot to the focus argument, the
+ focus window is dynamically taken to be the root window
+ of whatever screen the pointer is on at each input
+ event. In this case, the revert-to argument is ignored.
+
+ * If you assign FollowKeyboard to the focus argument, the
+ focus window is dynamically taken to be the same as the
+ focus of the X keyboard at each input event.
+
+ The specified focus window must be viewable at the time
+ of the request (else a Match error). If the focus window
+ later becomes not viewable, the X server evaluates the
+ revert-to argument to determine the new focus window.
+
+ * If you assign RevertToParent to the revert-to argument,
+ the focus reverts to the parent (or the closest viewable
+ ancestor), and the new revert-to value is taken to be
+ RevertToNone.
+
+ * If you assign RevertToPointerRoot,
+ RevertToFollowKeyboard, or RevertToNone to the revert-to
+ argument, the focus reverts to that value.
+
+ When the focus reverts, the X server generates DeviceFocusIn
+ and DeviceFocusOut events, but the last-focus-change time is
+ not affected.
+
+ This request causes the X server to generate DeviceFocusIn and
+ DeviceFocusOut events.
+
+2.18 Controlling Device Feedback
+
+ To get the settings of feedbacks on an extension device, use
+ GetFeedbackControl. This request provides functionality
+ equivalent to the core GetKeyboardControl and GetPointerControl
+ functions. It also provides a way to control displays
+ associated with an input device that are capable of displaying
+ an integer or string.
+
+ GetFeedbackControl
+ device: DEVICE
+ =>
+ num_feedbacks_return: CARD16
+ return_value: LISTofFEEDBACKSTATE
+
+ where
+
+ FEEDBACKSTATE: {KbdFeedbackState, PtrFeedbackState,
+ IntegerFeedbackState, StringFeedbackState,
+ BellFeedbackState, LedFeedbackState}
+
+ Feedbacks are reported by class. Those feedbacks that are
+ reported for the core keyboard device are in class KbdFeedback,
+ and are returned in the KbdFeedbackState structure. The members
+ of that structure are as follows:
+
+ CLASS Kbd:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ key_click_percent: CARD8
+ bell_percent: CARD8
+ bell_pitch: CARD16
+ bell_duration: CARD16
+ led_value: BITMASK
+ global_auto_repeat: {AutoRepeatModeOn, AutoRepeatModeOff}
+ auto_repeats: LISTofCARD8]
+
+ Those feedbacks that are equivalent to those reported for the
+ core pointer are in feedback class PtrFeedback and are reported
+ in the PtrFeedbackState structure. The members of that
+ structure are:
+
+ CLASS Ptr:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ accelNumerator: CARD16
+ accelDenominator: CARD16
+ threshold: CARD16]
+
+ Some input devices provide a means of displaying an integer.
+ Those devices will support feedback class IntegerFeedback,
+ which is reported in the IntegerFeedbackState structure. The
+ members of that structure are:
+
+ CLASS Integer:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ resolution: CARD32
+ min-val: INT32
+ max-val: INT32]
+
+ Some input devices provide a means of displaying a string.
+ Those devices will support feedback class StringFeedback, which
+ is reported in the StringFeedbackState structure. The members
+ of that structure are:
+
+ CLASS String:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ max_symbols: CARD16
+ num_keysyms_supported: CARD16
+ keysyms_supported: LISTofKEYSYM]
+
+ Some input devices contain a bell. Those devices will support
+ feedback class BellFeedback, which is reported in the
+ BellFeedbackState structure. The members of that structure are:
+
+ CLASS String:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ percent: CARD8
+ pitch: CARD16
+ duration: CARD16]
+
+ The percent sets the base volume for the bell between 0 (off)
+ and 100 (loud) inclusive, if possible. Setting to -1 restores
+ the default. Other negative values generate a Value error.
+
+ The pitch sets the pitch (specified in Hz) of the bell, if
+ possible. Setting to -1 restores the default. Other negative
+ values generate a Value error.
+
+ The duration sets the duration (specified in milliseconds) of
+ the bell, if possible. Setting to -1 restores the default.
+ Other negative values generate a Value error.
+
+ A bell generator connected with the console but not directly on
+ the device is treated as if it were part of the device. Some
+ input devices contain LEDs. Those devices will support feedback
+ class Led, which is reported in the LedFeedbackState structure.
+ The members of that structure are:
+
+ CLASS String:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ led_mask: BITMASK
+ led_value: BITMASK]
+
+ Each bit in led_mask indicates that the corresponding led is
+ supported by the feedback. At most 32 LEDs per feedback are
+ supported. No standard interpretation of LEDs is defined.
+
+ This function will fail with a BadMatch error if the device
+ specified in the request does not support feedbacks.
+
+ Errors: Device, Match
+
+ To change the settings of a feedback on an extension device,
+ use ChangeFeedbackControl.
+
+ ChangeFeedbackControl
+ device: DEVICE
+ feedbackid: CARD8
+ value-mask: BITMASK
+ value: FEEDBACKCONTROL
+ FEEDBACKCONTROL: {KBDFEEDBACKCONTROL,
+ PTRFEEDBACKCONTROL,
+ INTEGERFEEDBACKCONTROL,
+ STRINGFEEDBACKCONTROL,
+ BELLFEEDBACKCONTROL,
+ LEDFEEDBACKCONTROL}
+
+ Errors: Device, Match, Value
+
+ Feedback controls are grouped by class. Those feedbacks that
+ are equivalent to those supported by the core keyboard are
+ controlled by feedback class KbdFeedbackClass using the
+ KbdFeedbackControl structure. The members of that structure
+ are:
+
+ KBDFEEDBACKCTL
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ key_click_percent: INT8
+ bell_percent: INT8
+ bell_pitch: INT16
+ bell_duration: INT16
+ led_mask: INT32
+ led_value: INT32
+ key: KEYCODE
+ auto_repeat_mode: {AutoRepeatModeOn, AutoRepeatModeOff,
+ AutoRepeatModeDefault}]
+
+ The key_click_percent sets the volume for key clicks between 0
+ (off) and 100 (loud) inclusive, if possible. Setting to -1
+ restores the default. Other negative values generate a Value
+ error.
+
+ If both auto_repeat_mode and key are specified, then the
+ auto_repeat_mode of that key is changed, if possible. If only
+ auto_repeat_mode is specified, then the global auto-repeat mode
+ for the entire keyboard is changed, if possible, without
+ affecting the per-key settings. It is a Match error if a key is
+ specified without an auto_repeat_mode.
+
+ The order in which controls are verified and altered is
+ server-dependent. If an error is generated, a subset of the
+ controls may have been altered.
+
+ Those feedback controls equivalent to those of the core pointer
+ are controlled by feedback class PtrFeedbackClass using the
+ PtrFeedbackControl structure. The members of that structure are
+ as follows:
+
+ PTRFEEDBACKCTL:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ accelNumerator: INT16
+ accelDenominator: INT16
+ threshold: INT16]
+
+ The acceleration, expressed as a fraction, is a multiplier for
+ movement. For example, specifying 3/1 means the device moves
+ three times as fast as normal. The fraction may be rounded
+ arbitrarily by the X server. Acceleration only takes effect if
+ the device moves more than threshold pixels at once and only
+ applies to the amount beyond the value in the threshold
+ argument. Setting a value to -1 restores the default. The
+ values of the do-accel and do-threshold arguments must be
+ nonzero for the device values to be set. Otherwise, the
+ parameters will be unchanged. Negative values generate a Value
+ error, as does a zero value for the accel-denominator argument.
+
+ Some devices are capable of displaying an integer. This is done
+ using feedback class IntegerFeedbackClass using the
+ IntegerFeedbackControl structure. The members of that structure
+ are as follows:
+
+ INTEGERCTL:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ int_to_display: INT32]
+
+ Some devices are capable of displaying an string. This is done
+ using feedback class StringFeedbackClass using the
+ StringFeedbackCtl structure. The members of that structure are
+ as follows:
+
+ STRINGCTL:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ syms_to_display: LISTofKEYSYMS]
+
+ Some devices contain a bell. This is done using feedback class
+ BellFeedbackClass using the BellFeedbackControl structure. The
+ members of that structure are as follows:
+
+ BELLCTL:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ percent: INT8
+ pitch: INT16
+ duration: INT16]
+
+ Some devices contain leds. These can be turned on and off using
+ the LedFeedbackControl structure. The members of that structure
+ are as follows:
+
+ LEDCTL:
+ [class: CARD8
+ length: CARD16
+ feedback id: CARD8
+ led_mask: BITMASK
+ led_value: BITMASK]
+
+ Errors: Device, Match, Value
+
+2.20 Ringing a Bell on an Input Device
+
+ To ring a bell on an extension input device, use DeviceBell.
+
+ DeviceBell:
+ device: DEVICE
+ feedbackclass: CARD8
+ feedbackid: CARD8
+ percent: INT8
+
+ Errors: Device, Value
+
+ This request is analogous to the core Bell request. It rings
+ the specified bell on the specified input device feedback,
+ using the specified volume. The specified volume is relative to
+ the base volume for the feedback. If the value for the percent
+ argument is not in the range -100 to 100 inclusive, a Value
+ error results. The volume at which the bell rings when the
+ percent argument is nonnegative is:
+
+ base - [(base * percent) / 100] + percent
+
+ The volume at which the bell rings when the percent argument is
+ negative is:
+
+ base + [(base * percent) / 100]
+
+ To change the base volume of the bell, use
+ ChangeFeedbackControl request.
+
+Controlling Device Encoding
+
+ To get the keyboard mapping of an extension device that has
+ keys, use GetDeviceKeyMapping.
+
+ GetDeviceKeyMapping
+ device: DEVICE
+ first-keycode: KEYCODE
+ count: CARD8
+ =>
+ keysyms-per-keycode: CARD8
+ keysyms: LISTofKEYSYM
+
+ Errors: Device, Match, Value
+
+ This request returns the symbols for the specified number of
+ keycodes for the specified extension device, starting with the
+ specified keycode. The first-keycode must be greater than or
+ equal to min-keycode as returned in the connection setup (else
+ a Value error), and
+
+ first-keycode + count - 1
+
+ must be less than or equal to max-keycode as returned in the
+ connection setup (else a Value error). The number of elements
+ in the keysyms list is
+
+ count * keysyms-per-keycode
+
+ and KEYSYM number N (counting from zero) for keycode K has an
+ index (counting from zero) of
+
+ (K - first-keycode) * keysyms-per-keycode + N
+
+ in keysyms. The keysyms-per-keycode value is chosen arbitrarily
+ by the server to be large enough to report all requested
+ symbols. A special KEYSYM value of NoSymbol is used to fill in
+ unused elements for individual keycodes.
+
+ If the specified device has not first been opened by this
+ client via OpenDevice, or if that device does not support input
+ class Keys, this request will fail with a Device error.
+
+ To change the keyboard mapping of an extension device that has
+ keys, use ChangeDeviceKeyMapping.
+
+ ChangeDeviceKeyMapping
+ device: DEVICE
+ first-keycode: KEYCODE
+ keysyms-per-keycode: CARD8
+ keysyms: LISTofKEYSYM
+ num_codes: CARD8
+
+ Errors: Device, Match, Value, Alloc
+
+ This request is analogous to the core ChangeKeyMapping request.
+ It defines the symbols for the specified number of keycodes for
+ the specified extension device. If the specified device has not
+ first been opened by this client via OpenDevice, or if that
+ device does not support input class Keys, this request will
+ fail with a Device error.
+
+ The number of elements in the keysyms list must be a multiple
+ of keysyms_per_keycode. Otherwise, ChangeDeviceKeyMapping
+ generates a Length error. The specified first_keycode must be
+ greater than or equal to the min_keycode value returned by the
+ ListInputDevices request, or this request will fail with a
+ Value error. In addition, if the following expression is not
+ less than the max_keycode value returned by the
+ ListInputDevices request, the request will fail with a Value
+ error:
+
+ first_keycode + (num_codes / keysyms_per_keycode) - 1
+
+ To obtain the keycodes that are used as modifiers on an
+ extension device that has keys, use GetDeviceModifierMapping.
+
+ GetDeviceModifierMapping
+ device: DEVICE
+ =>
+ keycodes-per-modifier: CARD8
+ keycodes: LISTofKEYCODE
+
+ Errors: Device, Match
+
+ This request is analogous to the core GetModifierMapping
+ request. This request returns the keycodes of the keys being
+ used as modifiers. The number of keycodes in the list is
+ 8*keycodes-per-modifier. The keycodes are divided into eight
+ sets, with each set containing keycodes-per-modifier elements.
+ The sets are assigned in order to the modifiers Shift, Lock,
+ Control, Mod1, Mod2, Mod3, Mod4, and Mod5. The
+ keycodes-per-modifier value is chosen arbitrarily by the
+ server; zeroes are used to fill in unused elements within each
+ set. If only zero values are given in a set, the use of the
+ corresponding modifier has been disabled. The order of keycodes
+ within each set is chosen arbitrarily by the server.
+
+ To set which keycodes that are to be used as modifiers for an
+ extension device, use SetDeviceModifierMapping.
+
+ SetDeviceModifierMapping
+ device: DEVICE
+ keycodes-per-modifier: CARD8
+ keycodes: LISTofKEYCODE
+ =>
+ status: {Success, Busy, Failed}
+
+ Errors: Device, Match, Value, Alloc
+
+ This request is analogous to the core SetModifierMapping
+ request. This request specifies the keycodes (if any) of the
+ keys to be used as modifiers. The number of keycodes in the
+ list must be 8*keycodes-per-modifier (else a Length error). The
+ keycodes are divided into eight sets, with the sets, with each
+ set containing keycodes-per-modifier elements. The sets are
+ assigned in order to the modifiers Shift, Lock, Control, Mod1,
+ Mod2, Mod3, Mod4, and Mod5. Only non-zero keycode values are
+ used within each set; zero values are ignored. All of the
+ non-zero keycodes must be in the range specified by min-keycode
+ and max-keycode in the ListInputDevices request (else a Value
+ error). The order of keycodes within a set does not matter. If
+ no non-zero values are specified in a set, the use of the
+ corresponding modifier is disabled, and the modifier bit will
+ always be zero. Otherwise, the modifier bit will be one
+ whenever at least one of the keys in the corresponding set is
+ in the down position.
+
+ A server can impose restrictions on how modifiers can be
+ changed (for example, if certain keys do not generate up
+ transitions in hardware or if multiple keys per modifier are
+ not supported). The status reply is Failed if some such
+ restriction is violated, and none of the modifiers are changed.
+
+ If the new non-zero keycodes specified for a modifier differ
+ from those currently defined, and any (current or new) keys for
+ that modifier are logically in the down state, then the status
+ reply is Busy, and none of the modifiers are changed.
+
+ This request generates a DeviceMappingNotify event on a Success
+ status. The DeviceMappingNotify event will be sent only to
+ those clients that have expressed an interest in receiving that
+ event via the XSelectExtensionEvent request.
+
+ A X server can impose restrictions on how modifiers can be
+ changed, for example, if certain keys do not generate up
+ transitions in hardware or if multiple modifier keys are not
+ supported. If some such restriction is violated, the status
+ reply is MappingFailed , and none of the modifiers are changed.
+ If the new keycodes specified for a modifier differ from those
+ currently defined and any (current or new) keys for that
+ modifier are in the logically down state, the status reply is
+ MappingBusy, and none of the modifiers are changed.
+
+2.20 Controlling Button Mapping
+
+ These requests are analogous to the core GetPointerMapping and
+ ChangePointerMapping requests. They allow a client to determine
+ the current mapping of buttons on an extension device, and to
+ change that mapping.
+
+ To get the current button mapping for an extension device, use
+ GetDeviceButtonMapping.
+
+ GetDeviceButtonMapping
+ device: DEVICE
+ nmap: CARD8
+ =>
+ map_return: LISTofCARD8
+
+ Errors: Device, Match
+
+ The GetDeviceButtonMapping function returns the current mapping
+ of the buttons on the specified device. Elements of the list
+ are indexed starting from one. The length of the list indicates
+ the number of physical buttons. The nominal mapping is the
+ identity mapping map[i]=i.
+
+ nmap indicates the number of elements in the map_return array.
+ Only the first nmap entries will be copied by the library into
+ the map_return array.
+
+ To set the button mapping for an extension device, use
+ SetDeviceButtonMapping.
+
+ SetDeviceButtonMapping
+ device: DEVICE
+ map: LISTofCARD8
+ nmap: CARD8
+ =>
+ status: CARD8
+
+ Errors: Device, Match, Value
+
+ The SetDeviceButtonMapping function sets the mapping of the
+ specified device and causes the X server to generate a
+ DeviceMappingNotify event on a status of MappingSuccess.
+ Elements of the list are indexed starting from one. The length
+ of the list, specified in nmap, must be the same as
+ GetDeviceButtonMapping would return. Otherwise,
+ SetDeviceButtonMapping generates a Value error. A zero element
+ disables a button, and elements are not restricted in value by
+ the number of physical buttons. If any of the buttons to be
+ altered are in the down state, the status reply is MappingBusy
+ and the mapping is not changed.
+
+ In servers supporting XI 1.x, no two elements can have the same
+ nonzero value. Otherwise, this function generates a Value
+ error.
+
+2.21 Obtaining The State Of A Device
+
+ To obtain vectors that describe the state of the keys, buttons
+ and valuators of an extension device, use QueryDeviceState.
+
+ QueryDeviceState
+ device: DEVICE
+ =>
+ device-id: CARD8
+ data: LISTofINPUTCLASS
+
+ where
+
+ INPUTCLASS: {VALUATOR, BUTTON, KEY}
+ CLASS VALUATOR:
+ [class: CARD8
+ num_valuators: CARD8
+ mode: CARD8
+ #x01 device mode (0 = Relative, 1 = Absolute)
+ #x02 proximity state (0 = InProximity, 1 = OutOfProximity)
+ valuators: LISTofINT32]
+ CLASS BUTTON:
+ [class: CARD8
+ num_buttons: CARD8
+ buttons: LISTofCARD8]
+ CLASS KEY:
+ [class: CARD8
+ num_keys: CARD8
+ keys: LISTofCARD8]
+
+ Errors: Device
+
+ The QueryDeviceState request returns the current logical state
+ of the buttons, keys, and valuators on the specified input
+ device. The buttons and keys arrays, byte N (from 0) contains
+ the bits for key or button 8N to 8N+7 with the least
+ significant bit in the byte representing key or button 8N.
+
+ If the device has valuators, a bit in the mode field indicates
+ whether the device is reporting Absolute or Relative data. If
+ it is reporting Absolute data, the valuators array will contain
+ the current value of the valuators. If it is reporting Relative
+ data, the valuators array will contain undefined data.
+
+ If the device reports proximity information, a bit in the mode
+ field indicates whether the device is InProximity or
+ OutOfProximity.
+
+2.22 Listing Device Properties
+
+ Introduced with XI 1.5
+
+ ListDeviceProperties
+ deviceid: CARD8
+ =>
+ nAtoms: CARD16
+ Atoms: LISTofATOM
+
+ Errors: Device
+
+ Each device can store an arbitrary number of properties. These
+ properties can be allocated by either the client or the driver.
+ The client can change device properties and the server
+ guarantees that the device driver is notified about a change of
+ the device's properties.
+
+ ListDeviceProperties returns all properties of a device. The
+ client is expected to retrieve details about the properties it
+ is interested in separately.
+
+2.23 Getting a Device Property
+
+ Introduced with XI 1.5
+
+ GetDeviceProperty:
+ property: ATOM
+ type: ATOM
+ longOffset: CARD32
+ longLength: CARD32
+ deviceid: CARD8
+ delete: BOOL
+ =>
+ propertyType: ATOM
+ bytesAfter: CARD32
+ nItems: CARD32
+ format: CARD8
+ deviceid: CARD8
+ data: [LISTofCARD8]
+
+ Errors: Atom, Device, Value, Access
+
+ Retrieve the value for a property. If the property does not
+ exist, propertyType is None and all other fields are undefined.
+
+ If type is not AnyPropertyType and does not match the
+ property's actual type, the propertyType, bytesAfter, and
+ format are returned but not the actual data.
+
+ longOffset and longLength specify the offset and length
+ respectively in 32-bit multiples of the data to retrieve.
+
+ If delete is True, the property is deleted after querying its
+ data. If the property cannot be deleted, a BadAccess error is
+ returned.
+
+ propertyType returns the atom identifier that defines the
+ actual type of the property.
+
+ If bytesAfter is non-zero, it specifies the number of data
+ 4-byte units after the retrieved chunk of data.
+
+ format specifies whether the data should be viewed as a list of
+ 8-bit, 16-bit, or 32-bit quantities. Possible values are 8, 16,
+ and 32. This information allows the X server to correctly
+ perform byte-swap operations as necessary.
+
+ nItem specifies the number of 8-bit, 16-bit, or 32-bit items
+ returned after the request.
+
+2.24 Changing a Device Property
+
+ Introduced with XI 1.5
+
+ ChangeDeviceProperty:
+ property: ATOM
+ type: ATOM
+ deviceid: CARD8
+ format: CARD8
+ mode: CARD8
+ nUnits: CARD32
+
+ Errors: Atom, Device, Value, Match, Access
+
+ Changes the value of a specified property.
+
+ The type specifies the atom identifier that defines the type of
+ the property. If mode is not PropModeReplace, the type must
+ match the current type of the property or a BadMatch error is
+ returned.
+
+ format specifies whether the data should be viewed as a list of
+ 8-bit, 16-bit, or 32-bit quantities. Possible values are 8, 16,
+ and 32. This information allows the X server to correctly
+ perform byte-swap operations as necessary.
+
+ If mode is PropModeReplace, a preexising value for this
+ property is replaced with the new value. If mode is
+ PropModePrepend or PropModeAppend, the value is prepended or
+ appended, respectively, to the current value of the property.
+
+ nUnits specifies the number of 8-bit, 16-bit, or 32-bit items
+ supplied after the reply.
+
+ Changing a device property results in a
+ DevicePropertyNotifyEvent being sent to all clients.
+
+2.25 Deleting a Device Property
+
+ Introduced with XI 1.5
+
+ DeleteDeviceProperty:
+ property: ATOM
+ deviceid: CARD8
+
+ Errors: Atom, Device, Match, Access.
+
+ Deletes the specified property. If the property cannot be
+ deleted by the client, a BadAccess error is returned.
+
+3. Events
+
+ The input extension creates input events analogous to the core
+ input events. These extension input events are generated by
+ manipulating one of the extension input devices.
+
+3.1 Button, Key, and Motion Events
+
+ DeviceKeyPress
+ DeviceKeyRelease
+ DeviceButtonPress,
+ DeviceButtonRelease
+ DeviceMotionNotify
+ device: CARD8
+ root, event: WINDOW
+ child: Window or None
+ same-screen: BOOL
+ root-x, root-y, event-x, event-y: INT16
+ detail: <see below>
+ state: SETofKEYBUTMASK
+ time: TIMESTAMP
+
+ These events are generated when a key, button, or valuator
+ logically changes state. The generation of these logical
+ changes may lag the physical changes, if device event
+ processing is frozen. Note that DeviceKeyPress and
+ DeviceKeyRelease are generated for all keys, even those mapped
+ to modifier bits. The “source” of the event is the window the
+ pointer is in. The window with respect to which the event is
+ normally reported is found by looking up the hierarchy
+ (starting with the source window) for the first window on which
+ any client has selected interest in the event. The actual
+ window used for reporting can be modified by active grabs and
+ by the focus window.The window the event is reported with
+ respect to is called the “event” window.
+
+ The root is the root window of the “source” window, and root-x
+ and root-y are the pointer coordinates relative to root's
+ origin at the time of the event. Event is the “event” window.
+ If the event window is on the same screen as root, then event-x
+ and event-y are the pointer coordinates relative to the event
+ window's origin. Otherwise, event-x and event-y are zero. If
+ the source window is an inferior of the event window, then
+ child is set to the child of the event window that is an
+ ancestor of (or is) the source window. Otherwise, it is set to
+ None.
+
+ The state component gives the logical state of the buttons on
+ the X pointer and modifier keys on the core X keyboard just
+ before the event.
+
+ The detail component type varies with the event type:
+ Event Component
+ DeviceKeyPress KEYCODE
+ DeviceKeyRelease KEYCODE
+ DeviceButtonPress BUTTON
+ DeviceButtonRelease BUTTON
+ DeviceMotionNotify { Normal , Hint }
+
+ The granularity of motion events is not guaranteed, but a
+ client selecting for motion events is guaranteed to get at
+ least one event when a valuator changes. If DeviceMotionHint is
+ selected, the server is free to send only one
+ DeviceMotionNotify event (with detail Hint) to the client for
+ the event window, until either a key or button changes state,
+ the pointer leaves the event window, or the client issues a
+ QueryDeviceState or GetDeviceMotionEvents request.
+
+3.2 DeviceValuator Event
+
+ DeviceValuator
+ device: CARD8
+ device_state: SETofKEYBUTMASK
+ num_valuators: CARD8
+ first_valuator: CARD8
+ valuators: LISTofINT32
+
+ DeviceValuator events are generated to contain valuator
+ information for which there is insufficient space in DeviceKey,
+ DeviceButton, DeviceMotion, and Proximity wire events. For
+ events of these types, a second event of type DeviceValuator
+ follows immediately. The library combines these events into a
+ single event that a client can receive via XNextEvent.
+ DeviceValuator events are not selected for by clients, they
+ only exist to contain information that will not fit into some
+ event selected by clients.
+
+ The device_state component gives the state of the buttons and
+ modifiers on the device generating the event.
+
+ Extension motion devices may report motion data for a variable
+ number of axes. The valuators array contains the values of all
+ axes reported by the device. If more than 6 axes are reported,
+ more than one DeviceValuator event will be sent by the server,
+ and more than one DeviceKey, DeviceButton, DeviceMotion, or
+ Proximity event will be reported by the library. Clients should
+ examine the corresponding fields of the event reported by the
+ library to determine the total number of axes reported, and the
+ first axis reported in the current event. Axes are numbered
+ beginning with zero.
+
+ For Button, Key and Motion events on a device reporting
+ absolute motion data the current value of the device's
+ valuators is reported. For devices that report relative data,
+ Button and Key events may be followed by a DeviceValuator event
+ that contains 0s in the num_valuators field. In this case, only
+ the device_state component will have meaning.
+
+3.3 Device Focus Events
+
+ DeviceFocusIn
+ DeviceFocusOut
+ device: CARD8
+ time: TIMESTAMP
+ event: WINDOW
+ mode: { Normal, WhileGrabbed, Grab, Ungrab}
+ detail: { Ancestor, Virtual, Inferior, Nonlinear,
+ NonlinearVirtual, Pointer, PointerRoot, None}
+
+ These events are generated when the input focus changes and are
+ reported to clients selecting DeviceFocusChange for the
+ specified device and window. Events generated by SetDeviceFocus
+ when the device is not grabbed have mode Normal. Events
+ generated by SetDeviceFocus when the device is grabbed have
+ mode WhileGrabbed. Events generated when a device grab actives
+ have mode Grab, and events generated when a device grab
+ deactivates have mode Ungrab.
+
+ All DeviceFocusOut events caused by a window unmap are
+ generated after any UnmapNotify event, but the ordering of
+ DeviceFocusOut with respect to generated EnterNotify,
+ LeaveNotify, VisibilityNotify and Expose events is not
+ constrained.
+
+ DeviceFocusIn and DeviceFocusOut events are generated for focus
+ changes of extension devices in the same manner as focus events
+ for the core devices are generated.
+
+3.4 Device State Notify Event
+
+ DeviceStateNotify
+ time: TIMESTAMP
+ device: CARD8
+ num_keys: CARD8
+ num_buttons: CARD8
+ num_valuators: CARD8
+ classes_reported: CARD8 {SetOfDeviceMode | SetOfInputClass}
+ SetOfDeviceMode:
+ #x80 ProximityState 0 = InProxmity, 1 = OutOfProximity
+ #x40 Device Mode (0 = Relative, 1 = Absolute)
+ SetOfInputClass: #x04 reporting valuators
+ #x02 reporting buttons
+ #x01 reporting keys
+ buttons: LISTofCARD8
+ keys: LISTofCARD8
+ valuators: LISTofCARD32
+
+ This event reports the state of the device just as in the
+ QueryDeviceState request. This event is reported to clients
+ selecting DeviceStateNotify for the device and window and is
+ generated immediately after every EnterNotify and
+ DeviceFocusIn. If the device has no more than 32 buttons, no
+ more than 32 keys, and no more than 3 valuators, This event can
+ report the state of the device. If the device has more than 32
+ buttons, the event will be immediately followed by a
+ DeviceButtonStateNotify event. If the device has more than 32
+ keys, the event will be followed by a DeviceKeyStateNotify
+ event. If the device has more than 3 valuators, the event will
+ be followed by one or more DeviceValuator events.
+
+3.5 Device KeyState and ButtonState Notify Events
+
+ DeviceKeyStateNotify
+ device: CARD8
+ keys: LISTofCARD8
+ DeviceButtonStateNotify
+ device: CARD8
+ buttons: LISTofCARD8
+
+ These events contain information about the state of keys and
+ buttons on a device that will not fit into the
+ DeviceStateNotify wire event. These events are not selected by
+ clients, rather they may immediately follow a DeviceStateNotify
+ wire event and be combined with it into a single
+ DeviceStateNotify client event that a client may receive via
+ XNextEvent.
+
+3.6 DeviceMappingNotify Event
+
+ DeviceMappingNotify
+ time: TIMESTAMP
+ device: CARD8
+ request: CARD8
+ first_keycode: CARD8
+ count: CARD8
+
+ This event reports a change in the mapping of keys, modifiers,
+ or buttons on an extension device. This event is reported to
+ clients selecting DeviceMappingNotify for the device and window
+ and is generated after every client SetDeviceButtonMapping,
+ ChangeDeviceKeyMapping, or ChangeDeviceModifierMapping request.
+
+3.7 ChangeDeviceNotify Event
+
+ ChangeDeviceNotify
+ device: CARD8
+ time: TIMESTAMP
+ request: CARD8
+
+ This event reports a change in the physical device being used
+ as the core X keyboard or X pointer device. ChangeDeviceNotify
+ events are reported to clients selecting ChangeDeviceNotify for
+ the device and window and is generated after every client
+ ChangeKeyboardDevice or ChangePointerDevice request.
+
+3.7 Proximity Events
+
+ ProximityIn
+ ProximityOut
+ device: CARD8
+ root, event: WINDOW
+ child: Window or None
+ same-screen: BOOL
+ root-x, root-y, event-x, event-y: INT16
+ state: SETofKEYBUTMASK
+ time: TIMESTAMP
+ device-state: SETofKEYBUTMASK
+ axis-count: CARD8
+ first-axis: CARD8
+ axis-data: LISTofINT32
+
+ These events are generated by some devices (such as graphics
+ tablets or touchscreens) to indicate that a stylus has moved
+ into or out of contact with a positional sensing surface.
+
+ The “source” of the event is the window the pointer is in. The
+ window with respect to which the event is normally reported is
+ found by looking up the hierarchy (starting with the source
+ window) for the first window on which any client has selected
+ interest in the event. The actual window used for reporting can
+ be modified by active grabs and by the focus window.The window
+ the event is reported with respect to is called the “event”
+ window.
+
+ The root is the root window of the “source” window, and root-x
+ and root-y are the pointer coordinates relative to root's
+ origin at the time of the event. Event is the “event” window.
+ If the event window is on the same screen as root, then event-x
+ and event-y are the pointer coordinates relative to the event
+ window's origin. Otherwise, event-x and event-y are zero. If
+ the source window is an inferior of the event window, then
+ child is set to the child of the event window that is an
+ ancestor of (or is) the source window. Otherwise, it is set to
+ None. The state component gives the logical state of the
+ buttons on the core X pointer and modifier keys on the core X
+ keyboard just before the event. The device-state component
+ gives the state of the buttons and modifiers on the device
+ generating the event.
+
+3.8 DevicePresenceEvents
+
+ Introduced with XI 1.4.
+
+ DevicePresence
+ time: TIMESTAMP
+ devchange: BYTE
+ #x00: DeviceAdded
+ #x01: DeviceRemoved
+ #x02: DeviceEnabled
+ #x03: DeviceDisabled
+ #x04: DeviceUnrecoverable
+ #x05: DeviceControlChanged
+ deviceid: BYTE
+ control: CARD16
+
+ DevicePresence events are sent when the server adds or removes,
+ or enables or disables an input device. The client is expected
+ to query the server for the list of input devices using the
+ ListInputDevices request to obtain the updated list of input
+ devices. DevicePresence events are also sent when a control on
+ the device has been changed.
+
+ The devchange field specifies the type of operation. In case of
+ DeviceAdded, a new device has been added to the server, but
+ this device does not yet send events. If devchange is set to
+ DeviceEnabled, the device is enabled and will generate events.
+ If the field is DeviceDisabled or DeviceRemoved, the given
+ device is disabled and stops sending events or was removed from
+ the server, respectively. If the field is DeviceUnrecoverable,
+ an IO-error has occured on the device and the device is
+ forcibly disabled and removed by the server. If devchange is
+ DeviceControlChanged, control specifies the type of control
+ that has been changed.
+
+3.9 DevicePropertyNotifyEvent
+
+ Introduced with XI 1.5.
+
+ DevicePropertyNotifyEvent
+ deviceid: CARD8
+ state: CARD8
+ time: TIMESTAMP
+ atom: ATOM
+
+ A DevicePropertyNotifyEvent is sent to all clients when a
+ property on the device is created, deleted, or changes value.
+
+ The deviceid specifies the device which's property has been
+ modified.
+
+ The atom specifies the named identifier of the property that
+ has been altered.
+
+ If state is PropertyNewValue, the given property has a new
+ value or has been newly created. If state is PropertyDeleted,
+ the given property has been deleted.
diff --git a/X11/extensions/compositeproto.h b/X11/extensions/compositeproto.h
index c57628c9d..2e392e2eb 100644
--- a/X11/extensions/compositeproto.h
+++ b/X11/extensions/compositeproto.h
@@ -51,6 +51,7 @@
#define Window CARD32
#define Region CARD32
+#define Pixmap CARD32
/*
* requests and replies
@@ -187,5 +188,6 @@ typedef struct {
#undef Window
#undef Region
+#undef Pixmap
#endif /* _COMPOSITEPROTO_H_ */