diff options
Diffstat (limited to 'freetype/include/config')
| -rw-r--r-- | freetype/include/config/ftconfig.h | 672 | ||||
| -rw-r--r-- | freetype/include/config/ftheader.h | 832 | ||||
| -rw-r--r-- | freetype/include/config/ftmodule.h | 32 | ||||
| -rw-r--r-- | freetype/include/config/ftoption.h | 846 | ||||
| -rw-r--r-- | freetype/include/config/ftstdlib.h | 174 |
5 files changed, 2556 insertions, 0 deletions
diff --git a/freetype/include/config/ftconfig.h b/freetype/include/config/ftconfig.h new file mode 100644 index 000000000..48bd0b4bd --- /dev/null +++ b/freetype/include/config/ftconfig.h @@ -0,0 +1,672 @@ +/***************************************************************************/ +/* */ +/* ftconfig.h */ +/* */ +/* ANSI-specific configuration file (specification only). */ +/* */ +/* Copyright 1996-2004, 2006-2008, 2010-2011, 2013, 2014 by */ +/* David Turner, Robert Wilhelm, and Werner Lemberg. */ +/* */ +/* This file is part of the FreeType project, and may only be used, */ +/* modified, and distributed under the terms of the FreeType project */ +/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ +/* this file you indicate that you have read the license and */ +/* understand and accept it fully. */ +/* */ +/***************************************************************************/ + + + /*************************************************************************/ + /* */ + /* This header file contains a number of macro definitions that are used */ + /* by the rest of the engine. Most of the macros here are automatically */ + /* determined at compile time, and you should not need to change it to */ + /* port FreeType, except to compile the library with a non-ANSI */ + /* compiler. */ + /* */ + /* Note however that if some specific modifications are needed, we */ + /* advise you to place a modified copy in your build directory. */ + /* */ + /* The build directory is usually `builds/<system>', and contains */ + /* system-specific files that are always included first when building */ + /* the library. */ + /* */ + /* This ANSI version should stay in `include/config/'. */ + /* */ + /*************************************************************************/ + +#ifndef __FTCONFIG_H__ +#define __FTCONFIG_H__ + +#include <ft2build.h> +#include <freetype/config/ftoption.h> +#include <freetype/config/ftstdlib.h> + + +FT_BEGIN_HEADER + + + /*************************************************************************/ + /* */ + /* PLATFORM-SPECIFIC CONFIGURATION MACROS */ + /* */ + /* These macros can be toggled to suit a specific system. The current */ + /* ones are defaults used to compile FreeType in an ANSI C environment */ + /* (16bit compilers are also supported). Copy this file to your own */ + /* `builds/<system>' directory, and edit it to port the engine. */ + /* */ + /*************************************************************************/ + + + /* There are systems (like the Texas Instruments 'C54x) where a `char' */ + /* has 16 bits. ANSI C says that sizeof(char) is always 1. Since an */ + /* `int' has 16 bits also for this system, sizeof(int) gives 1 which */ + /* is probably unexpected. */ + /* */ + /* `CHAR_BIT' (defined in limits.h) gives the number of bits in a */ + /* `char' type. */ + +#ifndef FT_CHAR_BIT +#define FT_CHAR_BIT CHAR_BIT +#endif + + + /* The size of an `int' type. */ +#if FT_UINT_MAX == 0xFFFFUL +#define FT_SIZEOF_INT (16 / FT_CHAR_BIT) +#elif FT_UINT_MAX == 0xFFFFFFFFUL +#define FT_SIZEOF_INT (32 / FT_CHAR_BIT) +#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL +#define FT_SIZEOF_INT (64 / FT_CHAR_BIT) +#else +#error "Unsupported size of `int' type!" +#endif + + /* The size of a `long' type. A five-byte `long' (as used e.g. on the */ + /* DM642) is recognized but avoided. */ +#if FT_ULONG_MAX == 0xFFFFFFFFUL +#define FT_SIZEOF_LONG (32 / FT_CHAR_BIT) +#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL +#define FT_SIZEOF_LONG (32 / FT_CHAR_BIT) +#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL +#define FT_SIZEOF_LONG (64 / FT_CHAR_BIT) +#else +#error "Unsupported size of `long' type!" +#endif + + + /* FT_UNUSED is a macro used to indicate that a given parameter is not */ + /* used -- this is only used to get rid of unpleasant compiler warnings */ +#ifndef FT_UNUSED +#define FT_UNUSED( arg ) ( (arg) = (arg) ) +#endif + + + /*************************************************************************/ + /* */ + /* AUTOMATIC CONFIGURATION MACROS */ + /* */ + /* These macros are computed from the ones defined above. Don't touch */ + /* their definition, unless you know precisely what you are doing. No */ + /* porter should need to mess with them. */ + /* */ + /*************************************************************************/ + + + /*************************************************************************/ + /* */ + /* Mac support */ + /* */ + /* This is the only necessary change, so it is defined here instead */ + /* providing a new configuration file. */ + /* */ +#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) ) + /* no Carbon frameworks for 64bit 10.4.x */ + /* AvailabilityMacros.h is available since Mac OS X 10.2, */ + /* so guess the system version by maximum errno before inclusion */ +#include <errno.h> +#ifdef ECANCELED /* defined since 10.2 */ +#include "AvailabilityMacros.h" +#endif +#if defined( __LP64__ ) && \ + ( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 ) +#undef FT_MACINTOSH +#endif + +#elif defined( __SC__ ) || defined( __MRC__ ) + /* Classic MacOS compilers */ +#include "ConditionalMacros.h" +#if TARGET_OS_MAC +#define FT_MACINTOSH 1 +#endif + +#endif + + + /*************************************************************************/ + /* */ + /* <Section> */ + /* basic_types */ + /* */ + /*************************************************************************/ + + + /*************************************************************************/ + /* */ + /* <Type> */ + /* FT_Int16 */ + /* */ + /* <Description> */ + /* A typedef for a 16bit signed integer type. */ + /* */ + typedef signed short FT_Int16; + + + /*************************************************************************/ + /* */ + /* <Type> */ + /* FT_UInt16 */ + /* */ + /* <Description> */ + /* A typedef for a 16bit unsigned integer type. */ + /* */ + typedef unsigned short FT_UInt16; + + /* */ + + + /* this #if 0 ... #endif clause is for documentation purposes */ +#if 0 + + /*************************************************************************/ + /* */ + /* <Type> */ + /* FT_Int32 */ + /* */ + /* <Description> */ + /* A typedef for a 32bit signed integer type. The size depends on */ + /* the configuration. */ + /* */ + typedef signed XXX FT_Int32; + + + /*************************************************************************/ + /* */ + /* <Type> */ + /* FT_UInt32 */ + /* */ + /* A typedef for a 32bit unsigned integer type. The size depends on */ + /* the configuration. */ + /* */ + typedef unsigned XXX FT_UInt32; + + + /*************************************************************************/ + /* */ + /* <Type> */ + /* FT_Int64 */ + /* */ + /* A typedef for a 64bit signed integer type. The size depends on */ + /* the configuration. Only defined if there is real 64bit support; */ + /* otherwise, it gets emulated with a structure (if necessary). */ + /* */ + typedef signed XXX FT_Int64; + + + /*************************************************************************/ + /* */ + /* <Type> */ + /* FT_UInt64 */ + /* */ + /* A typedef for a 64bit unsigned integer type. The size depends on */ + /* the configuration. Only defined if there is real 64bit support; */ + /* otherwise, it gets emulated with a structure (if necessary). */ + /* */ + typedef unsigned XXX FT_UInt64; + + /* */ + +#endif + +#if FT_SIZEOF_INT == (32 / FT_CHAR_BIT) + + typedef signed int FT_Int32; + typedef unsigned int FT_UInt32; + +#elif FT_SIZEOF_LONG == (32 / FT_CHAR_BIT) + + typedef signed long FT_Int32; + typedef unsigned long FT_UInt32; + +#else +#error "no 32bit type found -- please check your configuration files" +#endif + + + /* look up an integer type that is at least 32 bits */ +#if FT_SIZEOF_INT >= (32 / FT_CHAR_BIT) + + typedef int FT_Fast; + typedef unsigned int FT_UFast; + +#elif FT_SIZEOF_LONG >= (32 / FT_CHAR_BIT) + + typedef long FT_Fast; + typedef unsigned long FT_UFast; + +#endif + + + /* determine whether we have a 64-bit int type for platforms without */ + /* Autoconf */ +#if FT_SIZEOF_LONG == (64 / FT_CHAR_BIT) + + /* FT_LONG64 must be defined if a 64-bit type is available */ +#define FT_LONG64 +#define FT_INT64 long +#define FT_UINT64 unsigned long + +#elif defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */ + + /* this compiler provides the __int64 type */ +#define FT_LONG64 +#define FT_INT64 __int64 +#define FT_UINT64 unsigned __int64 + +#elif defined( __BORLANDC__ ) /* Borland C++ */ + + /* XXXX: We should probably check the value of __BORLANDC__ in order */ + /* to test the compiler version. */ + + /* this compiler provides the __int64 type */ +#define FT_LONG64 +#define FT_INT64 __int64 +#define FT_UINT64 unsigned __int64 + +#elif defined( __WATCOMC__ ) /* Watcom C++ */ + + /* Watcom doesn't provide 64-bit data types */ + +#elif defined( __MWERKS__ ) /* Metrowerks CodeWarrior */ + +#define FT_LONG64 +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + +#elif defined( __GNUC__ ) + + /* GCC provides the `long long' type */ +#define FT_LONG64 +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + +#endif /* FT_SIZEOF_LONG == (64 / FT_CHAR_BIT) */ + + + /*************************************************************************/ + /* */ + /* A 64-bit data type will create compilation problems if you compile */ + /* in strict ANSI mode. To avoid them, we disable its use if __STDC__ */ + /* is defined. You can however ignore this rule by defining the */ + /* FT_CONFIG_OPTION_FORCE_INT64 configuration macro. */ + /* */ +#if defined( FT_LONG64 ) && !defined( FT_CONFIG_OPTION_FORCE_INT64 ) + +#ifdef __STDC__ + + /* undefine the 64-bit macros in strict ANSI compilation mode */ +#undef FT_LONG64 +#undef FT_INT64 + +#endif /* __STDC__ */ + +#endif /* FT_LONG64 && !FT_CONFIG_OPTION_FORCE_INT64 */ + +#ifdef FT_LONG64 + typedef FT_INT64 FT_Int64; + typedef FT_UINT64 FT_UInt64; +#endif + + +#define FT_BEGIN_STMNT do { +#define FT_END_STMNT } while ( 0 ) +#define FT_DUMMY_STMNT FT_BEGIN_STMNT FT_END_STMNT + + +#ifndef FT_CONFIG_OPTION_NO_ASSEMBLER + /* Provide assembler fragments for performance-critical functions. */ + /* These must be defined `static __inline__' with GCC. */ + +#if defined( __CC_ARM ) || defined( __ARMCC__ ) /* RVCT */ + +#define FT_MULFIX_ASSEMBLER FT_MulFix_arm + + /* documentation is in freetype.h */ + + static __inline FT_Int32 + FT_MulFix_arm( FT_Int32 a, + FT_Int32 b ) + { + register FT_Int32 t, t2; + + + __asm + { + smull t2, t, b, a /* (lo=t2,hi=t) = a*b */ + mov a, t, asr #31 /* a = (hi >> 31) */ + add a, a, #0x8000 /* a += 0x8000 */ + adds t2, t2, a /* t2 += a */ + adc t, t, #0 /* t += carry */ + mov a, t2, lsr #16 /* a = t2 >> 16 */ + orr a, a, t, lsl #16 /* a |= t << 16 */ + } + return a; + } + +#endif /* __CC_ARM || __ARMCC__ */ + + +#ifdef __GNUC__ + +#if defined( __arm__ ) && \ + ( !defined( __thumb__ ) || defined( __thumb2__ ) ) && \ + !( defined( __CC_ARM ) || defined( __ARMCC__ ) ) + +#define FT_MULFIX_ASSEMBLER FT_MulFix_arm + + /* documentation is in freetype.h */ + + static __inline__ FT_Int32 + FT_MulFix_arm( FT_Int32 a, + FT_Int32 b ) + { + register FT_Int32 t, t2; + + + __asm__ __volatile__ ( + "smull %1, %2, %4, %3\n\t" /* (lo=%1,hi=%2) = a*b */ + "mov %0, %2, asr #31\n\t" /* %0 = (hi >> 31) */ +#if defined( __clang__ ) && defined( __thumb2__ ) + "add.w %0, %0, #0x8000\n\t" /* %0 += 0x8000 */ +#else + "add %0, %0, #0x8000\n\t" /* %0 += 0x8000 */ +#endif + "adds %1, %1, %0\n\t" /* %1 += %0 */ + "adc %2, %2, #0\n\t" /* %2 += carry */ + "mov %0, %1, lsr #16\n\t" /* %0 = %1 >> 16 */ + "orr %0, %0, %2, lsl #16\n\t" /* %0 |= %2 << 16 */ + : "=r"(a), "=&r"(t2), "=&r"(t) + : "r"(a), "r"(b) + : "cc" ); + return a; + } + +#endif /* __arm__ && */ + /* ( __thumb2__ || !__thumb__ ) && */ + /* !( __CC_ARM || __ARMCC__ ) */ + + +#if defined( __i386__ ) + +#define FT_MULFIX_ASSEMBLER FT_MulFix_i386 + + /* documentation is in freetype.h */ + + static __inline__ FT_Int32 + FT_MulFix_i386( FT_Int32 a, + FT_Int32 b ) + { + register FT_Int32 result; + + + __asm__ __volatile__ ( + "imul %%edx\n" + "movl %%edx, %%ecx\n" + "sarl $31, %%ecx\n" + "addl $0x8000, %%ecx\n" + "addl %%ecx, %%eax\n" + "adcl $0, %%edx\n" + "shrl $16, %%eax\n" + "shll $16, %%edx\n" + "addl %%edx, %%eax\n" + : "=a"(result), "=d"(b) + : "a"(a), "d"(b) + : "%ecx", "cc" ); + return result; + } + +#endif /* i386 */ + +#endif /* __GNUC__ */ + + +#ifdef _MSC_VER /* Visual C++ */ + +#ifdef _M_IX86 + +#define FT_MULFIX_ASSEMBLER FT_MulFix_i386 + + /* documentation is in freetype.h */ + + static __inline FT_Int32 + FT_MulFix_i386( FT_Int32 a, + FT_Int32 b ) + { + register FT_Int32 result; + + __asm + { + mov eax, a + mov edx, b + imul edx + mov ecx, edx + sar ecx, 31 + add ecx, 8000h + add eax, ecx + adc edx, 0 + shr eax, 16 + shl edx, 16 + add eax, edx + mov result, eax + } + return result; + } + +#endif /* _M_IX86 */ + +#endif /* _MSC_VER */ + + +#if defined( __GNUC__ ) && defined( __x86_64__ ) + +#define FT_MULFIX_ASSEMBLER FT_MulFix_x86_64 + + static __inline__ FT_Int32 + FT_MulFix_x86_64( FT_Int32 a, + FT_Int32 b ) + { + /* Temporarily disable the warning that C90 doesn't support */ + /* `long long'. */ +#if ( __GNUC__ > 4 ) || ( ( __GNUC__ == 4 ) && ( __GNUC_MINOR__ >= 6 ) ) +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wlong-long" +#endif + +#if 1 + /* Technically not an assembly fragment, but GCC does a really good */ + /* job at inlining it and generating good machine code for it. */ + long long ret, tmp; + + + ret = (long long)a * b; + tmp = ret >> 63; + ret += 0x8000 + tmp; + + return (FT_Int32)( ret >> 16 ); +#else + + /* For some reason, GCC 4.6 on Ubuntu 12.04 generates invalid machine */ + /* code from the lines below. The main issue is that `wide_a' is not */ + /* properly initialized by sign-extending `a'. Instead, the generated */ + /* machine code assumes that the register that contains `a' on input */ + /* can be used directly as a 64-bit value, which is wrong most of the */ + /* time. */ + long long wide_a = (long long)a; + long long wide_b = (long long)b; + long long result; + + + __asm__ __volatile__ ( + "imul %2, %1\n" + "mov %1, %0\n" + "sar $63, %0\n" + "lea 0x8000(%1, %0), %0\n" + "sar $16, %0\n" + : "=&r"(result), "=&r"(wide_a) + : "r"(wide_b) + : "cc" ); + + return (FT_Int32)result; +#endif + +#if ( __GNUC__ > 4 ) || ( ( __GNUC__ == 4 ) && ( __GNUC_MINOR__ >= 6 ) ) +#pragma GCC diagnostic pop +#endif + } + +#endif /* __GNUC__ && __x86_64__ */ + +#endif /* !FT_CONFIG_OPTION_NO_ASSEMBLER */ + + +#ifdef FT_CONFIG_OPTION_INLINE_MULFIX +#ifdef FT_MULFIX_ASSEMBLER +#define FT_MULFIX_INLINED FT_MULFIX_ASSEMBLER +#endif +#endif + + +#ifdef FT_MAKE_OPTION_SINGLE_OBJECT + +#define FT_LOCAL( x ) static x +#define FT_LOCAL_DEF( x ) static x + +#else + +#ifdef __cplusplus +#define FT_LOCAL( x ) extern "C" x +#define FT_LOCAL_DEF( x ) extern "C" x +#else +#define FT_LOCAL( x ) extern x +#define FT_LOCAL_DEF( x ) x +#endif + +#endif /* FT_MAKE_OPTION_SINGLE_OBJECT */ + +#define FT_LOCAL_ARRAY( x ) extern const x +#define FT_LOCAL_ARRAY_DEF( x ) const x + + +#ifndef FT_BASE + +#ifdef __cplusplus +#define FT_BASE( x ) extern "C" x +#else +#define FT_BASE( x ) extern x +#endif + +#endif /* !FT_BASE */ + + +#ifndef FT_BASE_DEF + +#ifdef __cplusplus +#define FT_BASE_DEF( x ) x +#else +#define FT_BASE_DEF( x ) x +#endif + +#endif /* !FT_BASE_DEF */ + + +#ifndef FT_EXPORT + +#ifdef __cplusplus +#define FT_EXPORT( x ) extern "C" x +#else +#define FT_EXPORT( x ) extern x +#endif + +#endif /* !FT_EXPORT */ + + +#ifndef FT_EXPORT_DEF + +#ifdef __cplusplus +#define FT_EXPORT_DEF( x ) extern "C" x +#else +#define FT_EXPORT_DEF( x ) extern x +#endif + +#endif /* !FT_EXPORT_DEF */ + + +#ifndef FT_EXPORT_VAR + +#ifdef __cplusplus +#define FT_EXPORT_VAR( x ) extern "C" x +#else +#define FT_EXPORT_VAR( x ) extern x +#endif + +#endif /* !FT_EXPORT_VAR */ + + /* The following macros are needed to compile the library with a */ + /* C++ compiler and with 16bit compilers. */ + /* */ + + /* This is special. Within C++, you must specify `extern "C"' for */ + /* functions which are used via function pointers, and you also */ + /* must do that for structures which contain function pointers to */ + /* assure C linkage -- it's not possible to have (local) anonymous */ + /* functions which are accessed by (global) function pointers. */ + /* */ + /* */ + /* FT_CALLBACK_DEF is used to _define_ a callback function. */ + /* */ + /* FT_CALLBACK_TABLE is used to _declare_ a constant variable that */ + /* contains pointers to callback functions. */ + /* */ + /* FT_CALLBACK_TABLE_DEF is used to _define_ a constant variable */ + /* that contains pointers to callback functions. */ + /* */ + /* */ + /* Some 16bit compilers have to redefine these macros to insert */ + /* the infamous `_cdecl' or `__fastcall' declarations. */ + /* */ +#ifndef FT_CALLBACK_DEF +#ifdef __cplusplus +#define FT_CALLBACK_DEF( x ) extern "C" x +#else +#define FT_CALLBACK_DEF( x ) static x +#endif +#endif /* FT_CALLBACK_DEF */ + +#ifndef FT_CALLBACK_TABLE +#ifdef __cplusplus +#define FT_CALLBACK_TABLE extern "C" +#define FT_CALLBACK_TABLE_DEF extern "C" +#else +#define FT_CALLBACK_TABLE extern +#define FT_CALLBACK_TABLE_DEF /* nothing */ +#endif +#endif /* FT_CALLBACK_TABLE */ + + +FT_END_HEADER + + +#endif /* __FTCONFIG_H__ */ + + +/* END */ diff --git a/freetype/include/config/ftheader.h b/freetype/include/config/ftheader.h new file mode 100644 index 000000000..b62362992 --- /dev/null +++ b/freetype/include/config/ftheader.h @@ -0,0 +1,832 @@ +/***************************************************************************/ +/* */ +/* ftheader.h */ +/* */ +/* Build macros of the FreeType 2 library. */ +/* */ +/* Copyright 1996-2008, 2010, 2012, 2013 by */ +/* David Turner, Robert Wilhelm, and Werner Lemberg. */ +/* */ +/* This file is part of the FreeType project, and may only be used, */ +/* modified, and distributed under the terms of the FreeType project */ +/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ +/* this file you indicate that you have read the license and */ +/* understand and accept it fully. */ +/* */ +/***************************************************************************/ + +#ifndef __FT_HEADER_H__ +#define __FT_HEADER_H__ + + + /*@***********************************************************************/ + /* */ + /* <Macro> */ + /* FT_BEGIN_HEADER */ + /* */ + /* <Description> */ + /* This macro is used in association with @FT_END_HEADER in header */ + /* files to ensure that the declarations within are properly */ + /* encapsulated in an `extern "C" { .. }' block when included from a */ + /* C++ compiler. */ + /* */ +#ifdef __cplusplus +#define FT_BEGIN_HEADER extern "C" { +#else +#define FT_BEGIN_HEADER /* nothing */ +#endif + + + /*@***********************************************************************/ + /* */ + /* <Macro> */ + /* FT_END_HEADER */ + /* */ + /* <Description> */ + /* This macro is used in association with @FT_BEGIN_HEADER in header */ + /* files to ensure that the declarations within are properly */ + /* encapsulated in an `extern "C" { .. }' block when included from a */ + /* C++ compiler. */ + /* */ +#ifdef __cplusplus +#define FT_END_HEADER } +#else +#define FT_END_HEADER /* nothing */ +#endif + + + /*************************************************************************/ + /* */ + /* Aliases for the FreeType 2 public and configuration files. */ + /* */ + /*************************************************************************/ + + /*************************************************************************/ + /* */ + /* <Section> */ + /* header_file_macros */ + /* */ + /* <Title> */ + /* Header File Macros */ + /* */ + /* <Abstract> */ + /* Macro definitions used to #include specific header files. */ + /* */ + /* <Description> */ + /* The following macros are defined to the name of specific */ + /* FreeType~2 header files. They can be used directly in #include */ + /* statements as in: */ + /* */ + /* { */ + /* #include FT_FREETYPE_H */ + /* #include FT_MULTIPLE_MASTERS_H */ + /* #include FT_GLYPH_H */ + /* } */ + /* */ + /* There are several reasons why we are now using macros to name */ + /* public header files. The first one is that such macros are not */ + /* limited to the infamous 8.3~naming rule required by DOS (and */ + /* `FT_MULTIPLE_MASTERS_H' is a lot more meaningful than `ftmm.h'). */ + /* */ + /* The second reason is that it allows for more flexibility in the */ + /* way FreeType~2 is installed on a given system. */ + /* */ + /*************************************************************************/ + + + /* configuration files */ + + /************************************************************************* + * + * @macro: + * FT_CONFIG_CONFIG_H + * + * @description: + * A macro used in #include statements to name the file containing + * FreeType~2 configuration data. + * + */ +#ifndef FT_CONFIG_CONFIG_H +#define FT_CONFIG_CONFIG_H <config/ftconfig.h> +#endif + + + /************************************************************************* + * + * @macro: + * FT_CONFIG_STANDARD_LIBRARY_H + * + * @description: + * A macro used in #include statements to name the file containing + * FreeType~2 interface to the standard C library functions. + * + */ +#ifndef FT_CONFIG_STANDARD_LIBRARY_H +#define FT_CONFIG_STANDARD_LIBRARY_H <config/ftstdlib.h> +#endif + + + /************************************************************************* + * + * @macro: + * FT_CONFIG_OPTIONS_H + * + * @description: + * A macro used in #include statements to name the file containing + * FreeType~2 project-specific configuration options. + * + */ +#ifndef FT_CONFIG_OPTIONS_H +#define FT_CONFIG_OPTIONS_H <config/ftoption.h> +#endif + + + /************************************************************************* + * + * @macro: + * FT_CONFIG_MODULES_H + * + * @description: + * A macro used in #include statements to name the file containing the + * list of FreeType~2 modules that are statically linked to new library + * instances in @FT_Init_FreeType. + * + */ +#ifndef FT_CONFIG_MODULES_H +#define FT_CONFIG_MODULES_H <config/ftmodule.h> +#endif + + /* */ + + /* public headers */ + + /************************************************************************* + * + * @macro: + * FT_FREETYPE_H + * + * @description: + * A macro used in #include statements to name the file containing the + * base FreeType~2 API. + * + */ +#define FT_FREETYPE_H <freetype.h> + + + /************************************************************************* + * + * @macro: + * FT_ERRORS_H + * + * @description: + * A macro used in #include statements to name the file containing the + * list of FreeType~2 error codes (and messages). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_ERRORS_H <fterrors.h> + + + /************************************************************************* + * + * @macro: + * FT_MODULE_ERRORS_H + * + * @description: + * A macro used in #include statements to name the file containing the + * list of FreeType~2 module error offsets (and messages). + * + */ +#define FT_MODULE_ERRORS_H <ftmoderr.h> + + + /************************************************************************* + * + * @macro: + * FT_SYSTEM_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 interface to low-level operations (i.e., memory management + * and stream i/o). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_SYSTEM_H <ftsystem.h> + + + /************************************************************************* + * + * @macro: + * FT_IMAGE_H + * + * @description: + * A macro used in #include statements to name the file containing type + * definitions related to glyph images (i.e., bitmaps, outlines, + * scan-converter parameters). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_IMAGE_H <ftimage.h> + + + /************************************************************************* + * + * @macro: + * FT_TYPES_H + * + * @description: + * A macro used in #include statements to name the file containing the + * basic data types defined by FreeType~2. + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_TYPES_H <fttypes.h> + + + /************************************************************************* + * + * @macro: + * FT_LIST_H + * + * @description: + * A macro used in #include statements to name the file containing the + * list management API of FreeType~2. + * + * (Most applications will never need to include this file.) + * + */ +#define FT_LIST_H <ftlist.h> + + + /************************************************************************* + * + * @macro: + * FT_OUTLINE_H + * + * @description: + * A macro used in #include statements to name the file containing the + * scalable outline management API of FreeType~2. + * + */ +#define FT_OUTLINE_H <ftoutln.h> + + + /************************************************************************* + * + * @macro: + * FT_SIZES_H + * + * @description: + * A macro used in #include statements to name the file containing the + * API which manages multiple @FT_Size objects per face. + * + */ +#define FT_SIZES_H <ftsizes.h> + + + /************************************************************************* + * + * @macro: + * FT_MODULE_H + * + * @description: + * A macro used in #include statements to name the file containing the + * module management API of FreeType~2. + * + */ +#define FT_MODULE_H <ftmodapi.h> + + + /************************************************************************* + * + * @macro: + * FT_RENDER_H + * + * @description: + * A macro used in #include statements to name the file containing the + * renderer module management API of FreeType~2. + * + */ +#define FT_RENDER_H <ftrender.h> + + + /************************************************************************* + * + * @macro: + * FT_AUTOHINTER_H + * + * @description: + * A macro used in #include statements to name the file containing + * structures and macros related to the auto-hinting module. + * + */ +#define FT_AUTOHINTER_H <ftautoh.h> + + + /************************************************************************* + * + * @macro: + * FT_CFF_DRIVER_H + * + * @description: + * A macro used in #include statements to name the file containing + * structures and macros related to the CFF driver module. + * + */ +#define FT_CFF_DRIVER_H <ftcffdrv.h> + + + /************************************************************************* + * + * @macro: + * FT_TRUETYPE_DRIVER_H + * + * @description: + * A macro used in #include statements to name the file containing + * structures and macros related to the TrueType driver module. + * + */ +#define FT_TRUETYPE_DRIVER_H <ftttdrv.h> + + + /************************************************************************* + * + * @macro: + * FT_TYPE1_TABLES_H + * + * @description: + * A macro used in #include statements to name the file containing the + * types and API specific to the Type~1 format. + * + */ +#define FT_TYPE1_TABLES_H <t1tables.h> + + + /************************************************************************* + * + * @macro: + * FT_TRUETYPE_IDS_H + * + * @description: + * A macro used in #include statements to name the file containing the + * enumeration values which identify name strings, languages, encodings, + * etc. This file really contains a _large_ set of constant macro + * definitions, taken from the TrueType and OpenType specifications. + * + */ +#define FT_TRUETYPE_IDS_H <ttnameid.h> + + + /************************************************************************* + * + * @macro: + * FT_TRUETYPE_TABLES_H + * + * @description: + * A macro used in #include statements to name the file containing the + * types and API specific to the TrueType (as well as OpenType) format. + * + */ +#define FT_TRUETYPE_TABLES_H <tttables.h> + + + /************************************************************************* + * + * @macro: + * FT_TRUETYPE_TAGS_H + * + * @description: + * A macro used in #include statements to name the file containing the + * definitions of TrueType four-byte `tags' which identify blocks in + * SFNT-based font formats (i.e., TrueType and OpenType). + * + */ +#define FT_TRUETYPE_TAGS_H <tttags.h> + + + /************************************************************************* + * + * @macro: + * FT_BDF_H + * + * @description: + * A macro used in #include statements to name the file containing the + * definitions of an API which accesses BDF-specific strings from a + * face. + * + */ +#define FT_BDF_H <ftbdf.h> + + + /************************************************************************* + * + * @macro: + * FT_CID_H + * + * @description: + * A macro used in #include statements to name the file containing the + * definitions of an API which access CID font information from a + * face. + * + */ +#define FT_CID_H <ftcid.h> + + + /************************************************************************* + * + * @macro: + * FT_GZIP_H + * + * @description: + * A macro used in #include statements to name the file containing the + * definitions of an API which supports gzip-compressed files. + * + */ +#define FT_GZIP_H <ftgzip.h> + + + /************************************************************************* + * + * @macro: + * FT_LZW_H + * + * @description: + * A macro used in #include statements to name the file containing the + * definitions of an API which supports LZW-compressed files. + * + */ +#define FT_LZW_H <ftlzw.h> + + + /************************************************************************* + * + * @macro: + * FT_BZIP2_H + * + * @description: + * A macro used in #include statements to name the file containing the + * definitions of an API which supports bzip2-compressed files. + * + */ +#define FT_BZIP2_H <ftbzip2.h> + + + /************************************************************************* + * + * @macro: + * FT_WINFONTS_H + * + * @description: + * A macro used in #include statements to name the file containing the + * definitions of an API which supports Windows FNT files. + * + */ +#define FT_WINFONTS_H <ftwinfnt.h> + + + /************************************************************************* + * + * @macro: + * FT_GLYPH_H + * + * @description: + * A macro used in #include statements to name the file containing the + * API of the optional glyph management component. + * + */ +#define FT_GLYPH_H <ftglyph.h> + + + /************************************************************************* + * + * @macro: + * FT_BITMAP_H + * + * @description: + * A macro used in #include statements to name the file containing the + * API of the optional bitmap conversion component. + * + */ +#define FT_BITMAP_H <ftbitmap.h> + + + /************************************************************************* + * + * @macro: + * FT_BBOX_H + * + * @description: + * A macro used in #include statements to name the file containing the + * API of the optional exact bounding box computation routines. + * + */ +#define FT_BBOX_H <ftbbox.h> + + + /************************************************************************* + * + * @macro: + * FT_CACHE_H + * + * @description: + * A macro used in #include statements to name the file containing the + * API of the optional FreeType~2 cache sub-system. + * + */ +#define FT_CACHE_H <ftcache.h> + + + /************************************************************************* + * + * @macro: + * FT_CACHE_IMAGE_H + * + * @description: + * A macro used in #include statements to name the file containing the + * `glyph image' API of the FreeType~2 cache sub-system. + * + * It is used to define a cache for @FT_Glyph elements. You can also + * use the API defined in @FT_CACHE_SMALL_BITMAPS_H if you only need to + * store small glyph bitmaps, as it will use less memory. + * + * This macro is deprecated. Simply include @FT_CACHE_H to have all + * glyph image-related cache declarations. + * + */ +#define FT_CACHE_IMAGE_H FT_CACHE_H + + + /************************************************************************* + * + * @macro: + * FT_CACHE_SMALL_BITMAPS_H + * + * @description: + * A macro used in #include statements to name the file containing the + * `small bitmaps' API of the FreeType~2 cache sub-system. + * + * It is used to define a cache for small glyph bitmaps in a relatively + * memory-efficient way. You can also use the API defined in + * @FT_CACHE_IMAGE_H if you want to cache arbitrary glyph images, + * including scalable outlines. + * + * This macro is deprecated. Simply include @FT_CACHE_H to have all + * small bitmaps-related cache declarations. + * + */ +#define FT_CACHE_SMALL_BITMAPS_H FT_CACHE_H + + + /************************************************************************* + * + * @macro: + * FT_CACHE_CHARMAP_H + * + * @description: + * A macro used in #include statements to name the file containing the + * `charmap' API of the FreeType~2 cache sub-system. + * + * This macro is deprecated. Simply include @FT_CACHE_H to have all + * charmap-based cache declarations. + * + */ +#define FT_CACHE_CHARMAP_H FT_CACHE_H + + + /************************************************************************* + * + * @macro: + * FT_MAC_H + * + * @description: + * A macro used in #include statements to name the file containing the + * Macintosh-specific FreeType~2 API. The latter is used to access + * fonts embedded in resource forks. + * + * This header file must be explicitly included by client applications + * compiled on the Mac (note that the base API still works though). + * + */ +#define FT_MAC_H <ftmac.h> + + + /************************************************************************* + * + * @macro: + * FT_MULTIPLE_MASTERS_H + * + * @description: + * A macro used in #include statements to name the file containing the + * optional multiple-masters management API of FreeType~2. + * + */ +#define FT_MULTIPLE_MASTERS_H <ftmm.h> + + + /************************************************************************* + * + * @macro: + * FT_SFNT_NAMES_H + * + * @description: + * A macro used in #include statements to name the file containing the + * optional FreeType~2 API which accesses embedded `name' strings in + * SFNT-based font formats (i.e., TrueType and OpenType). + * + */ +#define FT_SFNT_NAMES_H <ftsnames.h> + + + /************************************************************************* + * + * @macro: + * FT_OPENTYPE_VALIDATE_H + * + * @description: + * A macro used in #include statements to name the file containing the + * optional FreeType~2 API which validates OpenType tables (BASE, GDEF, + * GPOS, GSUB, JSTF). + * + */ +#define FT_OPENTYPE_VALIDATE_H <ftotval.h> + + + /************************************************************************* + * + * @macro: + * FT_GX_VALIDATE_H + * + * @description: + * A macro used in #include statements to name the file containing the + * optional FreeType~2 API which validates TrueTypeGX/AAT tables (feat, + * mort, morx, bsln, just, kern, opbd, trak, prop). + * + */ +#define FT_GX_VALIDATE_H <ftgxval.h> + + + /************************************************************************* + * + * @macro: + * FT_PFR_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which accesses PFR-specific data. + * + */ +#define FT_PFR_H <ftpfr.h> + + + /************************************************************************* + * + * @macro: + * FT_STROKER_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which provides functions to stroke outline paths. + */ +#define FT_STROKER_H <ftstroke.h> + + + /************************************************************************* + * + * @macro: + * FT_SYNTHESIS_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which performs artificial obliquing and emboldening. + */ +#define FT_SYNTHESIS_H <ftsynth.h> + + + /************************************************************************* + * + * @macro: + * FT_XFREE86_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which provides functions specific to the XFree86 and + * X.Org X11 servers. + */ +#define FT_XFREE86_H <ftxf86.h> + + + /************************************************************************* + * + * @macro: + * FT_TRIGONOMETRY_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which performs trigonometric computations (e.g., + * cosines and arc tangents). + */ +#define FT_TRIGONOMETRY_H <fttrigon.h> + + + /************************************************************************* + * + * @macro: + * FT_LCD_FILTER_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which performs color filtering for subpixel rendering. + */ +#define FT_LCD_FILTER_H <ftlcdfil.h> + + + /************************************************************************* + * + * @macro: + * FT_UNPATENTED_HINTING_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which performs color filtering for subpixel rendering. + */ +#define FT_UNPATENTED_HINTING_H <ttunpat.h> + + + /************************************************************************* + * + * @macro: + * FT_INCREMENTAL_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which performs color filtering for subpixel rendering. + */ +#define FT_INCREMENTAL_H <ftincrem.h> + + + /************************************************************************* + * + * @macro: + * FT_GASP_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which returns entries from the TrueType GASP table. + */ +#define FT_GASP_H <ftgasp.h> + + + /************************************************************************* + * + * @macro: + * FT_ADVANCES_H + * + * @description: + * A macro used in #include statements to name the file containing the + * FreeType~2 API which returns individual and ranged glyph advances. + */ +#define FT_ADVANCES_H <ftadvanc.h> + + + /* */ + +#define FT_ERROR_DEFINITIONS_H <fterrdef.h> + + + /* The internals of the cache sub-system are no longer exposed. We */ + /* default to FT_CACHE_H at the moment just in case, but we know of */ + /* no rogue client that uses them. */ + /* */ +#define FT_CACHE_MANAGER_H <ftcache.h> +#define FT_CACHE_INTERNAL_MRU_H <ftcache.h> +#define FT_CACHE_INTERNAL_MANAGER_H <ftcache.h> +#define FT_CACHE_INTERNAL_CACHE_H <ftcache.h> +#define FT_CACHE_INTERNAL_GLYPH_H <ftcache.h> +#define FT_CACHE_INTERNAL_IMAGE_H <ftcache.h> +#define FT_CACHE_INTERNAL_SBITS_H <ftcache.h> + + +#define FT_INCREMENTAL_H <ftincrem.h> + +#define FT_TRUETYPE_UNPATENTED_H <ttunpat.h> + + + /* + * Include internal headers definitions from <internal/...> + * only when building the library. + */ +#ifdef FT2_BUILD_LIBRARY +#define FT_INTERNAL_INTERNAL_H <internal/internal.h> +#include FT_INTERNAL_INTERNAL_H +#endif /* FT2_BUILD_LIBRARY */ + + +#endif /* __FT2_BUILD_H__ */ + + +/* END */ diff --git a/freetype/include/config/ftmodule.h b/freetype/include/config/ftmodule.h new file mode 100644 index 000000000..76d271a74 --- /dev/null +++ b/freetype/include/config/ftmodule.h @@ -0,0 +1,32 @@ +/* + * This file registers the FreeType modules compiled into the library. + * + * If you use GNU make, this file IS NOT USED! Instead, it is created in + * the objects directory (normally `<topdir>/objs/') based on information + * from `<topdir>/modules.cfg'. + * + * Please read `docs/INSTALL.ANY' and `docs/CUSTOMIZE' how to compile + * FreeType without GNU make. + * + */ + +FT_USE_MODULE( FT_Module_Class, autofit_module_class ) +FT_USE_MODULE( FT_Driver_ClassRec, tt_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t1_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, cff_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t1cid_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, pfr_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t42_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, winfnt_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, pcf_driver_class ) +FT_USE_MODULE( FT_Module_Class, psaux_module_class ) +FT_USE_MODULE( FT_Module_Class, psnames_module_class ) +FT_USE_MODULE( FT_Module_Class, pshinter_module_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_raster1_renderer_class ) +FT_USE_MODULE( FT_Module_Class, sfnt_module_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_smooth_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcd_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcdv_renderer_class ) +FT_USE_MODULE( FT_Driver_ClassRec, bdf_driver_class ) + +/* EOF */ diff --git a/freetype/include/config/ftoption.h b/freetype/include/config/ftoption.h new file mode 100644 index 000000000..5b11f0e03 --- /dev/null +++ b/freetype/include/config/ftoption.h @@ -0,0 +1,846 @@ +/***************************************************************************/ +/* */ +/* ftoption.h */ +/* */ +/* User-selectable configuration macros (specification only). */ +/* */ +/* Copyright 1996-2013 by */ +/* David Turner, Robert Wilhelm, and Werner Lemberg. */ +/* */ +/* This file is part of the FreeType project, and may only be used, */ +/* modified, and distributed under the terms of the FreeType project */ +/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ +/* this file you indicate that you have read the license and */ +/* understand and accept it fully. */ +/* */ +/***************************************************************************/ + + +#ifndef __FTOPTION_H__ +#define __FTOPTION_H__ + + +#include <ft2build.h> + + +FT_BEGIN_HEADER + + /*************************************************************************/ + /* */ + /* USER-SELECTABLE CONFIGURATION MACROS */ + /* */ + /* This file contains the default configuration macro definitions for */ + /* a standard build of the FreeType library. There are three ways to */ + /* use this file to build project-specific versions of the library: */ + /* */ + /* - You can modify this file by hand, but this is not recommended in */ + /* cases where you would like to build several versions of the */ + /* library from a single source directory. */ + /* */ + /* - You can put a copy of this file in your build directory, more */ + /* precisely in `$BUILD/config/ftoption.h', where `$BUILD' is the */ + /* name of a directory that is included _before_ the FreeType include */ + /* path during compilation. */ + /* */ + /* The default FreeType Makefiles and Jamfiles use the build */ + /* directory `builds/<system>' by default, but you can easily change */ + /* that for your own projects. */ + /* */ + /* - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it */ + /* slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to */ + /* locate this file during the build. For example, */ + /* */ + /* #define FT_CONFIG_OPTIONS_H <myftoptions.h> */ + /* #include <config/ftheader.h> */ + /* */ + /* will use `$BUILD/myftoptions.h' instead of this file for macro */ + /* definitions. */ + /* */ + /* Note also that you can similarly pre-define the macro */ + /* FT_CONFIG_MODULES_H used to locate the file listing of the modules */ + /* that are statically linked to the library at compile time. By */ + /* default, this file is <config/ftmodule.h>. */ + /* */ + /* We highly recommend using the third method whenever possible. */ + /* */ + /*************************************************************************/ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /*************************************************************************/ + /* */ + /* Uncomment the line below if you want to activate sub-pixel rendering */ + /* (a.k.a. LCD rendering, or ClearType) in this build of the library. */ + /* */ + /* Note that this feature is covered by several Microsoft patents */ + /* and should not be activated in any default build of the library. */ + /* */ + /* This macro has no impact on the FreeType API, only on its */ + /* _implementation_. For example, using FT_RENDER_MODE_LCD when calling */ + /* FT_Render_Glyph still generates a bitmap that is 3 times wider than */ + /* the original size in case this macro isn't defined; however, each */ + /* triplet of subpixels has R=G=B. */ + /* */ + /* This is done to allow FreeType clients to run unmodified, forcing */ + /* them to display normal gray-level anti-aliased glyphs. */ + /* */ +/* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */ + + + /*************************************************************************/ + /* */ + /* Many compilers provide a non-ANSI 64-bit data type that can be used */ + /* by FreeType to speed up some computations. However, this will create */ + /* some problems when compiling the library in strict ANSI mode. */ + /* */ + /* For this reason, the use of 64-bit integers is normally disabled when */ + /* the __STDC__ macro is defined. You can however disable this by */ + /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here. */ + /* */ + /* For most compilers, this will only create compilation warnings when */ + /* building the library. */ + /* */ + /* ObNote: The compiler-specific 64-bit integers are detected in the */ + /* file `ftconfig.h' either statically or through the */ + /* `configure' script on supported platforms. */ + /* */ +#undef FT_CONFIG_OPTION_FORCE_INT64 + + + /*************************************************************************/ + /* */ + /* If this macro is defined, do not try to use an assembler version of */ + /* performance-critical functions (e.g. FT_MulFix). You should only do */ + /* that to verify that the assembler function works properly, or to */ + /* execute benchmark tests of the various implementations. */ +/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */ + + + /*************************************************************************/ + /* */ + /* If this macro is defined, try to use an inlined assembler version of */ + /* the `FT_MulFix' function, which is a `hotspot' when loading and */ + /* hinting glyphs, and which should be executed as fast as possible. */ + /* */ + /* Note that if your compiler or CPU is not supported, this will default */ + /* to the standard and portable implementation found in `ftcalc.c'. */ + /* */ +#define FT_CONFIG_OPTION_INLINE_MULFIX + + + /*************************************************************************/ + /* */ + /* LZW-compressed file support. */ + /* */ + /* FreeType now handles font files that have been compressed with the */ + /* `compress' program. This is mostly used to parse many of the PCF */ + /* files that come with various X11 distributions. The implementation */ + /* uses NetBSD's `zopen' to partially uncompress the file on the fly */ + /* (see src/lzw/ftgzip.c). */ + /* */ + /* Define this macro if you want to enable this `feature'. */ + /* */ +#define FT_CONFIG_OPTION_USE_LZW + + + /*************************************************************************/ + /* */ + /* Gzip-compressed file support. */ + /* */ + /* FreeType now handles font files that have been compressed with the */ + /* `gzip' program. This is mostly used to parse many of the PCF files */ + /* that come with XFree86. The implementation uses `zlib' to */ + /* partially uncompress the file on the fly (see src/gzip/ftgzip.c). */ + /* */ + /* Define this macro if you want to enable this `feature'. See also */ + /* the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below. */ + /* */ +#define FT_CONFIG_OPTION_USE_ZLIB + + + /*************************************************************************/ + /* */ + /* ZLib library selection */ + /* */ + /* This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. */ + /* It allows FreeType's `ftgzip' component to link to the system's */ + /* installation of the ZLib library. This is useful on systems like */ + /* Unix or VMS where it generally is already available. */ + /* */ + /* If you let it undefined, the component will use its own copy */ + /* of the zlib sources instead. These have been modified to be */ + /* included directly within the component and *not* export external */ + /* function names. This allows you to link any program with FreeType */ + /* _and_ ZLib without linking conflicts. */ + /* */ + /* Do not #undef this macro here since the build system might define */ + /* it for certain configurations only. */ + /* */ +/* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */ + + + /*************************************************************************/ + /* */ + /* Bzip2-compressed file support. */ + /* */ + /* FreeType now handles font files that have been compressed with the */ + /* `bzip2' program. This is mostly used to parse many of the PCF */ + /* files that come with XFree86. The implementation uses `libbz2' to */ + /* partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */ + /* Contrary to gzip, bzip2 currently is not included and need to use */ + /* the system available bzip2 implementation. */ + /* */ + /* Define this macro if you want to enable this `feature'. */ + /* */ +/* #define FT_CONFIG_OPTION_USE_BZIP2 */ + + + /*************************************************************************/ + /* */ + /* Define to disable the use of file stream functions and types, FILE, */ + /* fopen() etc. Enables the use of smaller system libraries on embedded */ + /* systems that have multiple system libraries, some with or without */ + /* file stream support, in the cases where file stream support is not */ + /* necessary such as memory loading of font files. */ + /* */ +/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */ + + + /*************************************************************************/ + /* */ + /* PNG bitmap support. */ + /* */ + /* FreeType now handles loading color bitmap glyphs in the PNG format. */ + /* This requires help from the external libpng library. Uncompressed */ + /* color bitmaps do not need any external libraries and will be */ + /* supported regardless of this configuration. */ + /* */ + /* Define this macro if you want to enable this `feature'. */ + /* */ +/* #define FT_CONFIG_OPTION_USE_PNG */ + + + /*************************************************************************/ + /* */ + /* HarfBuzz support. */ + /* */ + /* FreeType uses the HarfBuzz library to improve auto-hinting of */ + /* OpenType fonts. If available, many glyphs not directly addressable */ + /* by a font's character map will be hinted also. */ + /* */ + /* Define this macro if you want to enable this `feature'. */ + /* */ +/* #define FT_CONFIG_OPTION_USE_HARFBUZZ */ + + + /*************************************************************************/ + /* */ + /* DLL export compilation */ + /* */ + /* When compiling FreeType as a DLL, some systems/compilers need a */ + /* special keyword in front OR after the return type of function */ + /* declarations. */ + /* */ + /* Two macros are used within the FreeType source code to define */ + /* exported library functions: FT_EXPORT and FT_EXPORT_DEF. */ + /* */ + /* FT_EXPORT( return_type ) */ + /* */ + /* is used in a function declaration, as in */ + /* */ + /* FT_EXPORT( FT_Error ) */ + /* FT_Init_FreeType( FT_Library* alibrary ); */ + /* */ + /* */ + /* FT_EXPORT_DEF( return_type ) */ + /* */ + /* is used in a function definition, as in */ + /* */ + /* FT_EXPORT_DEF( FT_Error ) */ + /* FT_Init_FreeType( FT_Library* alibrary ) */ + /* { */ + /* ... some code ... */ + /* return FT_Err_Ok; */ + /* } */ + /* */ + /* You can provide your own implementation of FT_EXPORT and */ + /* FT_EXPORT_DEF here if you want. If you leave them undefined, they */ + /* will be later automatically defined as `extern return_type' to */ + /* allow normal compilation. */ + /* */ + /* Do not #undef these macros here since the build system might define */ + /* them for certain configurations only. */ + /* */ +/* #define FT_EXPORT(x) extern x */ +/* #define FT_EXPORT_DEF(x) x */ + + + /*************************************************************************/ + /* */ + /* Glyph Postscript Names handling */ + /* */ + /* By default, FreeType 2 is compiled with the `psnames' module. This */ + /* module is in charge of converting a glyph name string into a */ + /* Unicode value, or return a Macintosh standard glyph name for the */ + /* use with the TrueType `post' table. */ + /* */ + /* Undefine this macro if you do not want `psnames' compiled in your */ + /* build of FreeType. This has the following effects: */ + /* */ + /* - The TrueType driver will provide its own set of glyph names, */ + /* if you build it to support postscript names in the TrueType */ + /* `post' table. */ + /* */ + /* - The Type 1 driver will not be able to synthesize a Unicode */ + /* charmap out of the glyphs found in the fonts. */ + /* */ + /* You would normally undefine this configuration macro when building */ + /* a version of FreeType that doesn't contain a Type 1 or CFF driver. */ + /* */ +#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES + + + /*************************************************************************/ + /* */ + /* Postscript Names to Unicode Values support */ + /* */ + /* By default, FreeType 2 is built with the `PSNames' module compiled */ + /* in. Among other things, the module is used to convert a glyph name */ + /* into a Unicode value. This is especially useful in order to */ + /* synthesize on the fly a Unicode charmap from the CFF/Type 1 driver */ + /* through a big table named the `Adobe Glyph List' (AGL). */ + /* */ + /* Undefine this macro if you do not want the Adobe Glyph List */ + /* compiled in your `PSNames' module. The Type 1 driver will not be */ + /* able to synthesize a Unicode charmap out of the glyphs found in the */ + /* fonts. */ + /* */ +#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST + + + /*************************************************************************/ + /* */ + /* Support for Mac fonts */ + /* */ + /* Define this macro if you want support for outline fonts in Mac */ + /* format (mac dfont, mac resource, macbinary containing a mac */ + /* resource) on non-Mac platforms. */ + /* */ + /* Note that the `FOND' resource isn't checked. */ + /* */ +#define FT_CONFIG_OPTION_MAC_FONTS + + + /*************************************************************************/ + /* */ + /* Guessing methods to access embedded resource forks */ + /* */ + /* Enable extra Mac fonts support on non-Mac platforms (e.g. */ + /* GNU/Linux). */ + /* */ + /* Resource forks which include fonts data are stored sometimes in */ + /* locations which users or developers don't expected. In some cases, */ + /* resource forks start with some offset from the head of a file. In */ + /* other cases, the actual resource fork is stored in file different */ + /* from what the user specifies. If this option is activated, */ + /* FreeType tries to guess whether such offsets or different file */ + /* names must be used. */ + /* */ + /* Note that normal, direct access of resource forks is controlled via */ + /* the FT_CONFIG_OPTION_MAC_FONTS option. */ + /* */ +#ifdef FT_CONFIG_OPTION_MAC_FONTS +#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK +#endif + + + /*************************************************************************/ + /* */ + /* Allow the use of FT_Incremental_Interface to load typefaces that */ + /* contain no glyph data, but supply it via a callback function. */ + /* This is required by clients supporting document formats which */ + /* supply font data incrementally as the document is parsed, such */ + /* as the Ghostscript interpreter for the PostScript language. */ + /* */ +#define FT_CONFIG_OPTION_INCREMENTAL + + + /*************************************************************************/ + /* */ + /* The size in bytes of the render pool used by the scan-line converter */ + /* to do all of its work. */ + /* */ + /* This must be greater than 4KByte if you use FreeType to rasterize */ + /* glyphs; otherwise, you may set it to zero to avoid unnecessary */ + /* allocation of the render pool. */ + /* */ +#define FT_RENDER_POOL_SIZE 16384L + + + /*************************************************************************/ + /* */ + /* FT_MAX_MODULES */ + /* */ + /* The maximum number of modules that can be registered in a single */ + /* FreeType library object. 32 is the default. */ + /* */ +#define FT_MAX_MODULES 32 + + + /*************************************************************************/ + /* */ + /* Debug level */ + /* */ + /* FreeType can be compiled in debug or trace mode. In debug mode, */ + /* errors are reported through the `ftdebug' component. In trace */ + /* mode, additional messages are sent to the standard output during */ + /* execution. */ + /* */ + /* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */ + /* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */ + /* */ + /* Don't define any of these macros to compile in `release' mode! */ + /* */ + /* Do not #undef these macros here since the build system might define */ + /* them for certain configurations only. */ + /* */ +/* #define FT_DEBUG_LEVEL_ERROR */ +/* #define FT_DEBUG_LEVEL_TRACE */ + + + /*************************************************************************/ + /* */ + /* Autofitter debugging */ + /* */ + /* If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to */ + /* control the autofitter behaviour for debugging purposes with global */ + /* boolean variables (consequently, you should *never* enable this */ + /* while compiling in `release' mode): */ + /* */ + /* _af_debug_disable_horz_hints */ + /* _af_debug_disable_vert_hints */ + /* _af_debug_disable_blue_hints */ + /* */ + /* Additionally, the following functions provide dumps of various */ + /* internal autofit structures to stdout (using `printf'): */ + /* */ + /* af_glyph_hints_dump_points */ + /* af_glyph_hints_dump_segments */ + /* af_glyph_hints_dump_edges */ + /* */ + /* As an argument, they use another global variable: */ + /* */ + /* _af_debug_hints */ + /* */ + /* Please have a look at the `ftgrid' demo program to see how those */ + /* variables and macros should be used. */ + /* */ + /* Do not #undef these macros here since the build system might define */ + /* them for certain configurations only. */ + /* */ +/* #define FT_DEBUG_AUTOFIT */ + + + /*************************************************************************/ + /* */ + /* Memory Debugging */ + /* */ + /* FreeType now comes with an integrated memory debugger that is */ + /* capable of detecting simple errors like memory leaks or double */ + /* deletes. To compile it within your build of the library, you */ + /* should define FT_DEBUG_MEMORY here. */ + /* */ + /* Note that the memory debugger is only activated at runtime when */ + /* when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */ + /* */ + /* Do not #undef this macro here since the build system might define */ + /* it for certain configurations only. */ + /* */ +/* #define FT_DEBUG_MEMORY */ + + + /*************************************************************************/ + /* */ + /* Module errors */ + /* */ + /* If this macro is set (which is _not_ the default), the higher byte */ + /* of an error code gives the module in which the error has occurred, */ + /* while the lower byte is the real error code. */ + /* */ + /* Setting this macro makes sense for debugging purposes only, since */ + /* it would break source compatibility of certain programs that use */ + /* FreeType 2. */ + /* */ + /* More details can be found in the files ftmoderr.h and fterrors.h. */ + /* */ +#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS + + + /*************************************************************************/ + /* */ + /* Position Independent Code */ + /* */ + /* If this macro is set (which is _not_ the default), FreeType2 will */ + /* avoid creating constants that require address fixups. Instead the */ + /* constants will be moved into a struct and additional intialization */ + /* code will be used. */ + /* */ + /* Setting this macro is needed for systems that prohibit address */ + /* fixups, such as BREW. */ + /* */ +/* #define FT_CONFIG_OPTION_PIC */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** S F N T D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */ + /* embedded bitmaps in all formats using the SFNT module (namely */ + /* TrueType & OpenType). */ + /* */ +#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS + + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */ + /* load and enumerate the glyph Postscript names in a TrueType or */ + /* OpenType file. */ + /* */ + /* Note that when you do not compile the `PSNames' module by undefining */ + /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */ + /* contain additional code used to read the PS Names table from a font. */ + /* */ + /* (By default, the module uses `PSNames' to extract glyph names.) */ + /* */ +#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES + + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */ + /* access the internal name table in a SFNT-based format like TrueType */ + /* or OpenType. The name table contains various strings used to */ + /* describe the font, like family name, copyright, version, etc. It */ + /* does not contain any glyph name though. */ + /* */ + /* Accessing SFNT names is done through the functions declared in */ + /* `ftsnames.h'. */ + /* */ +#define TT_CONFIG_OPTION_SFNT_NAMES + + + /*************************************************************************/ + /* */ + /* TrueType CMap support */ + /* */ + /* Here you can fine-tune which TrueType CMap table format shall be */ + /* supported. */ +#define TT_CONFIG_CMAP_FORMAT_0 +#define TT_CONFIG_CMAP_FORMAT_2 +#define TT_CONFIG_CMAP_FORMAT_4 +#define TT_CONFIG_CMAP_FORMAT_6 +#define TT_CONFIG_CMAP_FORMAT_8 +#define TT_CONFIG_CMAP_FORMAT_10 +#define TT_CONFIG_CMAP_FORMAT_12 +#define TT_CONFIG_CMAP_FORMAT_13 +#define TT_CONFIG_CMAP_FORMAT_14 + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */ + /* a bytecode interpreter in the TrueType driver. */ + /* */ + /* By undefining this, you will only compile the code necessary to load */ + /* TrueType glyphs without hinting. */ + /* */ + /* Do not #undef this macro here, since the build system might */ + /* define it for certain configurations only. */ + /* */ +#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER + + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile */ + /* EXPERIMENTAL subpixel hinting support into the TrueType driver. This */ + /* replaces the native TrueType hinting mechanism when anything but */ + /* FT_RENDER_MODE_MONO is requested. */ + /* */ + /* Enabling this causes the TrueType driver to ignore instructions under */ + /* certain conditions. This is done in accordance with the guide here, */ + /* with some minor differences: */ + /* */ + /* http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */ + /* */ + /* By undefining this, you only compile the code necessary to hint */ + /* TrueType glyphs with native TT hinting. */ + /* */ + /* This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be */ + /* defined. */ + /* */ +/* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING */ + + + /*************************************************************************/ + /* */ + /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version */ + /* of the TrueType bytecode interpreter is used that doesn't implement */ + /* any of the patented opcodes and algorithms. The patents related to */ + /* TrueType hinting have expired worldwide since May 2010; this option */ + /* is now deprecated. */ + /* */ + /* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored* */ + /* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words, */ + /* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or */ + /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time. */ + /* */ + /* This macro is only useful for a small number of font files (mostly */ + /* for Asian scripts) that require bytecode interpretation to properly */ + /* load glyphs. For all other fonts, this produces unpleasant results, */ + /* thus the unpatented interpreter is never used to load glyphs from */ + /* TrueType fonts unless one of the following two options is used. */ + /* */ + /* - The unpatented interpreter is explicitly activated by the user */ + /* through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag */ + /* when opening the FT_Face. */ + /* */ + /* - FreeType detects that the FT_Face corresponds to one of the */ + /* `trick' fonts (e.g., `Mingliu') it knows about. The font engine */ + /* contains a hard-coded list of font names and other matching */ + /* parameters (see function `tt_face_init' in file */ + /* `src/truetype/ttobjs.c'). */ + /* */ + /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */ + /* */ + /* { */ + /* FT_Parameter parameter; */ + /* FT_Open_Args open_args; */ + /* */ + /* */ + /* parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING; */ + /* */ + /* open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS; */ + /* open_args.pathname = my_font_pathname; */ + /* open_args.num_params = 1; */ + /* open_args.params = ¶meter; */ + /* */ + /* error = FT_Open_Face( library, &open_args, index, &face ); */ + /* ... */ + /* } */ + /* */ +/* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */ + + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_INTERPRETER_SWITCH to compile the TrueType */ + /* bytecode interpreter with a huge switch statement, rather than a call */ + /* table. This results in smaller and faster code for a number of */ + /* architectures. */ + /* */ + /* Note however that on some compiler/processor combinations, undefining */ + /* this macro will generate faster, though larger, code. */ + /* */ +#define TT_CONFIG_OPTION_INTERPRETER_SWITCH + + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the */ + /* TrueType glyph loader to use Apple's definition of how to handle */ + /* component offsets in composite glyphs. */ + /* */ + /* Apple and MS disagree on the default behavior of component offsets */ + /* in composites. Apple says that they should be scaled by the scaling */ + /* factors in the transformation matrix (roughly, it's more complex) */ + /* while MS says they should not. OpenType defines two bits in the */ + /* composite flags array which can be used to disambiguate, but old */ + /* fonts will not have them. */ + /* */ + /* http://www.microsoft.com/typography/otspec/glyf.htm */ + /* http://fonts.apple.com/TTRefMan/RM06/Chap6glyf.html */ + /* */ +#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED + + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include */ + /* support for Apple's distortable font technology (fvar, gvar, cvar, */ + /* and avar tables). This has many similarities to Type 1 Multiple */ + /* Masters support. */ + /* */ +#define TT_CONFIG_OPTION_GX_VAR_SUPPORT + + + /*************************************************************************/ + /* */ + /* Define TT_CONFIG_OPTION_BDF if you want to include support for */ + /* an embedded `BDF ' table within SFNT-based bitmap formats. */ + /* */ +#define TT_CONFIG_OPTION_BDF + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /*************************************************************************/ + /* */ + /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and */ + /* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */ + /* required. */ + /* */ +#define T1_MAX_DICT_DEPTH 5 + + + /*************************************************************************/ + /* */ + /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */ + /* calls during glyph loading. */ + /* */ +#define T1_MAX_SUBRS_CALLS 16 + + + /*************************************************************************/ + /* */ + /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */ + /* minimum of 16 is required. */ + /* */ + /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */ + /* */ +#define T1_MAX_CHARSTRINGS_OPERANDS 256 + + + /*************************************************************************/ + /* */ + /* Define this configuration macro if you want to prevent the */ + /* compilation of `t1afm', which is in charge of reading Type 1 AFM */ + /* files into an existing face. Note that if set, the T1 driver will be */ + /* unable to produce kerning distances. */ + /* */ +#undef T1_CONFIG_OPTION_NO_AFM + + + /*************************************************************************/ + /* */ + /* Define this configuration macro if you want to prevent the */ + /* compilation of the Multiple Masters font support in the Type 1 */ + /* driver. */ + /* */ +#undef T1_CONFIG_OPTION_NO_MM_SUPPORT + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** C F F D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /*************************************************************************/ + /* */ + /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF */ + /* engine gets compiled into FreeType. If defined, it is possible to */ + /* switch between the two engines using the `hinting-engine' property of */ + /* the cff driver module. */ + /* */ +/* #define CFF_CONFIG_OPTION_OLD_ENGINE */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /*************************************************************************/ + /* */ + /* Compile autofit module with CJK (Chinese, Japanese, Korean) script */ + /* support. */ + /* */ +#define AF_CONFIG_OPTION_CJK + + /*************************************************************************/ + /* */ + /* Compile autofit module with Indic script support. */ + /* */ +#define AF_CONFIG_OPTION_INDIC + + /*************************************************************************/ + /* */ + /* Compile autofit module with warp hinting. The idea of the warping */ + /* code is to slightly scale and shift a glyph within a single dimension */ + /* so that as much of its segments are aligned (more or less) on the */ + /* grid. To find out the optimal scaling and shifting value, various */ + /* parameter combinations are tried and scored. */ + /* */ + /* This experimental option is only active if the render mode is */ + /* FT_RENDER_MODE_LIGHT. */ + /* */ +/* #define AF_CONFIG_OPTION_USE_WARPER */ + + /* */ + + + /* + * This macro is obsolete. Support has been removed in FreeType + * version 2.5. + */ +/* #define FT_CONFIG_OPTION_OLD_INTERNALS */ + + + /* + * This macro is defined if either unpatented or native TrueType + * hinting is requested by the definitions above. + */ +#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER +#define TT_USE_BYTECODE_INTERPRETER +#undef TT_CONFIG_OPTION_UNPATENTED_HINTING +#elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING +#define TT_USE_BYTECODE_INTERPRETER +#endif + +FT_END_HEADER + + +#endif /* __FTOPTION_H__ */ + + +/* END */ diff --git a/freetype/include/config/ftstdlib.h b/freetype/include/config/ftstdlib.h new file mode 100644 index 000000000..b940efc42 --- /dev/null +++ b/freetype/include/config/ftstdlib.h @@ -0,0 +1,174 @@ +/***************************************************************************/ +/* */ +/* ftstdlib.h */ +/* */ +/* ANSI-specific library and header configuration file (specification */ +/* only). */ +/* */ +/* Copyright 2002-2007, 2009, 2011-2012 by */ +/* David Turner, Robert Wilhelm, and Werner Lemberg. */ +/* */ +/* This file is part of the FreeType project, and may only be used, */ +/* modified, and distributed under the terms of the FreeType project */ +/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ +/* this file you indicate that you have read the license and */ +/* understand and accept it fully. */ +/* */ +/***************************************************************************/ + + + /*************************************************************************/ + /* */ + /* This file is used to group all #includes to the ANSI C library that */ + /* FreeType normally requires. It also defines macros to rename the */ + /* standard functions within the FreeType source code. */ + /* */ + /* Load a file which defines __FTSTDLIB_H__ before this one to override */ + /* it. */ + /* */ + /*************************************************************************/ + + +#ifndef __FTSTDLIB_H__ +#define __FTSTDLIB_H__ + + +#include <stddef.h> + +#define ft_ptrdiff_t ptrdiff_t + + + /**********************************************************************/ + /* */ + /* integer limits */ + /* */ + /* UINT_MAX and ULONG_MAX are used to automatically compute the size */ + /* of `int' and `long' in bytes at compile-time. So far, this works */ + /* for all platforms the library has been tested on. */ + /* */ + /* Note that on the extremely rare platforms that do not provide */ + /* integer types that are _exactly_ 16 and 32 bits wide (e.g. some */ + /* old Crays where `int' is 36 bits), we do not make any guarantee */ + /* about the correct behaviour of FT2 with all fonts. */ + /* */ + /* In these case, `ftconfig.h' will refuse to compile anyway with a */ + /* message like `couldn't find 32-bit type' or something similar. */ + /* */ + /**********************************************************************/ + + +#include <limits.h> + +#define FT_CHAR_BIT CHAR_BIT +#define FT_USHORT_MAX USHRT_MAX +#define FT_INT_MAX INT_MAX +#define FT_INT_MIN INT_MIN +#define FT_UINT_MAX UINT_MAX +#define FT_ULONG_MAX ULONG_MAX + + + /**********************************************************************/ + /* */ + /* character and string processing */ + /* */ + /**********************************************************************/ + + +#include <string.h> + +#define ft_memchr memchr +#define ft_memcmp memcmp +#define ft_memcpy memcpy +#define ft_memmove memmove +#define ft_memset memset +#define ft_strcat strcat +#define ft_strcmp strcmp +#define ft_strcpy strcpy +#define ft_strlen strlen +#define ft_strncmp strncmp +#define ft_strncpy strncpy +#define ft_strrchr strrchr +#define ft_strstr strstr + + + /**********************************************************************/ + /* */ + /* file handling */ + /* */ + /**********************************************************************/ + + +#include <stdio.h> + +#define FT_FILE FILE +#define ft_fclose fclose +#define ft_fopen fopen +#define ft_fread fread +#define ft_fseek fseek +#define ft_ftell ftell +#define ft_sprintf sprintf + + + /**********************************************************************/ + /* */ + /* sorting */ + /* */ + /**********************************************************************/ + + +#include <stdlib.h> + +#define ft_qsort qsort + + + /**********************************************************************/ + /* */ + /* memory allocation */ + /* */ + /**********************************************************************/ + + +#define ft_scalloc calloc +#define ft_sfree free +#define ft_smalloc malloc +#define ft_srealloc realloc + + + /**********************************************************************/ + /* */ + /* miscellaneous */ + /* */ + /**********************************************************************/ + + +#define ft_atol atol +#define ft_labs labs + + + /**********************************************************************/ + /* */ + /* execution control */ + /* */ + /**********************************************************************/ + + +#include <setjmp.h> + +#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */ + /* jmp_buf is defined as a macro */ + /* on certain platforms */ + +#define ft_longjmp longjmp +#define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) ) /* same thing here */ + + + /* the following is only used for debugging purposes, i.e., if */ + /* FT_DEBUG_LEVEL_ERROR or FT_DEBUG_LEVEL_TRACE are defined */ + +#include <stdarg.h> + + +#endif /* __FTSTDLIB_H__ */ + + +/* END */ |